wolfEntropy Adaptive Proportion Fix 2025

.codespellexcludelines

@@ -1,21 +0,0 @@
-###############################################################################
-# In this file, you should add the line of the file that needs to be ignored.
-# The line should be exactly as it appears in the file.
-###############################################################################
-        0x0b, 0x45, 0x6e, 0x67, 0x69, 0x6e, 0x65, 0x65, /* .Enginee */
-        0x66, 0x6f, 0x40, 0x77, 0x6f, 0x6c, 0x66, 0x73, /* fo@wolfs */
-        0x0a, 0x8b, 0x98, 0xf3, 0xe3, 0xff, 0x4e, 0x44, /* ......ND */
-ot+3i9DAgBkcRcAtjOj4LaR0VknFBbVPFd5uRHg5h6h+u/N5GJG79G+dwfCMNYxd\n\
-static const byte plaintext[] = "Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras lacus odio, pretium vel sagittis ac, facilisis quis diam. Vivamus condimentum velit sed dolor consequat interdum. Etiam eleifend ornare felis, eleifend egestas odio vulputate eu. Sed nec orci nunc. Etiam quis mi augue. Donec ullamcorper suscipit lorem, vel luctus augue cursus fermentum. Etiam a porta arcu, in convallis sem. Integer efficitur elementum diam, vel scelerisque felis posuere placerat. Donec vestibulum sit amet leo sit amet tincidunt. Etiam et vehicula turpis. Phasellus quis finibus sapien. Sed et tristique turpis. Nullam vitae sagittis tortor, et aliquet lorem. Cras a leo scelerisque, convallis lacus ut, fermentum urna. Mauris quis urna diam. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos. Nam aliquam vehicula orci id pulvinar. Proin mollis, libero sollicitudin tempor ultrices, massa augue tincidunt turpis, sit amet aliquam neque nibh nec dui. Fusce finibus massa quis rutrum suscipit cras amet";
-rsource "Kconfig.tls-generic"
-        /* Loop over authenticated associated data AD1..ADn */
-  /* no easy answer [c'est la vie].  Just division */
-    const uint8_t* hashIn, int hashSz)
-    XMEMCPY(hash + (curveSz - hashSz), hashIn, hashSz);
-        0x63, 0x72, 0x65, 0x65, 0x6e, 0x20, 0x77, 0x6f, 0x75, 0x6c, 0x64, 0x20, 0x62, 0x65, 0x20, 0x69, /* creen would be i */
-        0x75, 0x6c, 0x64, 0x20, 0x62, 0x65, 0x20, 0x69, /* creen would be i */
-\pagenumbering{alph}
-    DES3_KEY_SIZE       = 24,  /* 3 des ede               */
-/* functions added to support above needed, removed TOOM and KARATSUBA */
-#include <sys/systm.h>
- * extern global version from /usr/src/sys/sys/systm.h */

.github/ISSUE_TEMPLATE/bug_report.yaml

@@ -6,10 +6,8 @@ body:
   - type: markdown
     attributes:
       value: >
-        Thanks for reporting a bug. If you would prefer a private method,
+        Thanks for reporting an bug. If you would prefer a private method,
-        or if this is a vulnerability report please email support@wolfssl.com
+        please email support@wolfssl.com
-        instead. This is publicly viewable and not appropriate for vulnerability
-        reports.
   - type: input
     id: contact
     attributes:

.github/ISSUE_TEMPLATE/other.yaml

@@ -6,9 +6,7 @@ body:
     attributes:
       value: >
         Thanks for reporting an issue. If you would prefer a private method,
-        or if this is a vulnerability report please email support@wolfssl.com
+        please email support@wolfssl.com
-        instead. This is publicly viewable and not appropriate for vulnerability
-        reports.
   - type: input
     id: version
     attributes:

.github/renode-test/stm32h753/CMakeLists.txt

@@ -1,108 +0,0 @@
-cmake_minimum_required(VERSION 3.18)
-project(wolfcrypt_stm32h753 LANGUAGES C ASM)
-
-set(WOLFSSL_ROOT "/opt/wolfssl" CACHE PATH "wolfSSL source")
-
-set(CMAKE_TRY_COMPILE_TARGET_TYPE STATIC_LIBRARY)
-enable_language(ASM)
-
-# Include paths for CMSIS device headers and STM32 HAL
-# Order matters: CMSIS must come before HAL
-include_directories(BEFORE
-    ${CMAKE_SOURCE_DIR}
-    /opt/CMSIS_5/CMSIS/Core/Include  # Core CMSIS (core_cm7.h, etc.) - must be first
-    /opt/cmsis-device-h7/Include     # Device-specific CMSIS (stm32h7xx.h)
-    /opt/STM32CubeH7/Drivers/STM32H7xx_HAL_Driver/Inc/Legacy
-    /opt/STM32CubeH7/Drivers/STM32H7xx_HAL_Driver/Inc
-)
-
-# STM32 HAL source files (minimal set for CRYP and HASH)
-# Note: These files are cloned in the Dockerfile before CMake runs
-set(HAL_SRC_DIR /opt/STM32CubeH7/Drivers/STM32H7xx_HAL_Driver/Src)
-
-# Check if HAL directory exists, then add source files
-if(EXISTS ${HAL_SRC_DIR})
-    set(HAL_SOURCES
-        ${HAL_SRC_DIR}/stm32h7xx_hal.c
-        ${HAL_SRC_DIR}/stm32h7xx_hal_rcc.c
-        ${HAL_SRC_DIR}/stm32h7xx_hal_rcc_ex.c
-        ${HAL_SRC_DIR}/stm32h7xx_hal_cortex.c
-        ${HAL_SRC_DIR}/stm32h7xx_hal_dma.c
-        ${HAL_SRC_DIR}/stm32h7xx_hal_dma_ex.c
-        ${HAL_SRC_DIR}/stm32h7xx_hal_rng.c
-        # CRYP HAL files enabled for AES_GCM only
-        ${HAL_SRC_DIR}/stm32h7xx_hal_cryp.c
-        ${HAL_SRC_DIR}/stm32h7xx_hal_cryp_ex.c
-        # HASH HAL files disabled - Renode doesn't implement HASH peripheral
-        # ${HAL_SRC_DIR}/stm32h7xx_hal_hash.c
-        # ${HAL_SRC_DIR}/stm32h7xx_hal_hash_ex.c
-    )
-else()
-    message(WARNING "HAL source directory not found: ${HAL_SRC_DIR}")
-    set(HAL_SOURCES "")
-endif()
-
-# wolfSSL build options
-set(WOLFSSL_USER_SETTINGS ON CACHE BOOL "Use user_settings.h")
-set(WOLFSSL_CRYPT_TESTS OFF CACHE BOOL "")
-set(WOLFSSL_EXAMPLES OFF CACHE BOOL "")
-set(BUILD_SHARED_LIBS OFF CACHE BOOL "")
-
-add_subdirectory(${WOLFSSL_ROOT} ${CMAKE_BINARY_DIR}/wolfssl-build EXCLUDE_FROM_ALL)
-target_include_directories(wolfssl PRIVATE
-    /opt/CMSIS_5/CMSIS/Core/Include  # Core CMSIS first
-    /opt/cmsis-device-h7/Include     # Device CMSIS
-    /opt/STM32CubeH7/Drivers/STM32H7xx_HAL_Driver/Inc/Legacy
-    /opt/STM32CubeH7/Drivers/STM32H7xx_HAL_Driver/Inc
-    ${CMAKE_SOURCE_DIR}  # For stm32h7xx_hal_conf.h
-)
-# Suppress the GENSEED_FORTEST warning (expected for emulation/test builds)
-target_compile_options(wolfssl PRIVATE -Wno-cpp)
-
-# wolfSSL STM32 port source file (needed for HASH and CRYPTO hardware acceleration)
-set(WOLFSSL_STM32_PORT_SRC ${WOLFSSL_ROOT}/wolfcrypt/src/port/st/stm32.c)
-
-add_executable(wolfcrypt_test.elf
-    startup_stm32h753.c
-    main.c
-    ${WOLFSSL_ROOT}/wolfcrypt/test/test.c
-    ${HAL_SOURCES}
-    ${WOLFSSL_STM32_PORT_SRC}
-)
-
-target_include_directories(wolfcrypt_test.elf PRIVATE
-    ${CMAKE_SOURCE_DIR}
-    ${WOLFSSL_ROOT}
-    /opt/STM32CubeH7/Drivers/STM32H7xx_HAL_Driver/Inc
-    /opt/STM32CubeH7/Drivers/STM32H7xx_HAL_Driver/Inc/Legacy
-)
-
-target_compile_definitions(wolfcrypt_test.elf PRIVATE
-    WOLFSSL_USER_SETTINGS
-    STM32H753xx
-    USE_HAL_DRIVER
-    USE_HAL_CONF  # Enable HAL configuration
-    # NO_AES_CBC is defined in user_settings.h, no need to define it here
-)
-
-# HAL source files need the same compile options and must include stdint.h
-# Disable all warnings for HAL files (third-party code we don't control)
-set_source_files_properties(${HAL_SOURCES} PROPERTIES
-    COMPILE_FLAGS "-mcpu=cortex-m7 -mthumb -mfpu=fpv5-d16 -mfloat-abi=hard -ffunction-sections -fdata-sections -Os -include stdint.h -w"
-)
-
-target_compile_options(wolfcrypt_test.elf PRIVATE
-    -mcpu=cortex-m7 -mthumb -mfpu=fpv5-d16 -mfloat-abi=hard
-    -ffunction-sections -fdata-sections -Os
-)
-
-target_link_options(wolfcrypt_test.elf PRIVATE
-    -T${CMAKE_SOURCE_DIR}/stm32h753.ld
-    -Wl,--gc-sections
-    -nostartfiles
-    -specs=nano.specs
-    -specs=nosys.specs
-)
-
-target_link_libraries(wolfcrypt_test.elf PRIVATE wolfssl m c gcc nosys)
-

.github/renode-test/stm32h753/entrypoint.sh

@@ -1,194 +0,0 @@
-#!/bin/bash
-set -euo pipefail
-
-LOG=/tmp/wolfcrypt-renode.log
-TIMEOUT=300  # Maximum 5 minutes
-
-echo "Running wolfCrypt test in Renode..."
-
-# Try to find Renode binary in common installation locations
-# When installed via .deb package, Renode is typically in /usr/bin/renode
-RENODE_BIN="${RENODE_BIN:-$(command -v renode 2>/dev/null || true)}"
-if [ -z "$RENODE_BIN" ]; then
-    # Check common installation paths (order matters - check standard locations first)
-    for path in /usr/bin/renode /usr/local/bin/renode /opt/renode/renode; do
-        if [ -x "$path" ]; then
-            RENODE_BIN="$path"
-            break
-        fi
-    done
-fi
-
-if [ -z "$RENODE_BIN" ] || [ ! -x "$RENODE_BIN" ]; then
-    echo "Renode binary not found in image."
-    echo "Checked paths: /usr/bin/renode, /usr/local/bin/renode, /opt/renode/renode"
-    echo "PATH: $PATH"
-    which renode || echo "renode not in PATH"
-    exit 2
-fi
-
-echo "Using Renode binary: $RENODE_BIN"
-
-# Determine Renode root directory (where platforms/ directory is located)
-if [ -d "/opt/renode/platforms" ]; then
-    RENODE_ROOT="/opt/renode"
-elif [ -d "/usr/lib/renode/platforms" ]; then
-    RENODE_ROOT="/usr/lib/renode"
-elif [ -d "/usr/share/renode/platforms" ]; then
-    RENODE_ROOT="/usr/share/renode"
-else
-    # Try to find Renode root by checking where the binary is
-    RENODE_DIR=$(dirname "$(readlink -f "${RENODE_BIN}" 2>/dev/null || echo "${RENODE_BIN}")")
-    if [ -d "${RENODE_DIR}/../platforms" ]; then
-        RENODE_ROOT=$(readlink -f "${RENODE_DIR}/.." 2>/dev/null || echo "${RENODE_DIR}/..")
-    else
-        echo "Warning: Could not determine Renode root directory"
-        RENODE_ROOT=""
-    fi
-fi
-
-# Set RENODE_ROOT environment variable (Renode uses this to find platform files)
-if [ -n "$RENODE_ROOT" ]; then
-    export RENODE_ROOT
-    echo "Using Renode root: ${RENODE_ROOT}"
-    # Also create .renode-root file in firmware directory as backup
-    echo "${RENODE_ROOT}" > /opt/firmware/.renode-root
-    chmod 644 /opt/firmware/.renode-root
-else
-    echo "ERROR: Could not determine Renode root directory"
-    exit 1
-fi
-
-# Verify platform file exists
-PLATFORM_FILE="${RENODE_ROOT}/platforms/cpus/stm32h753.repl"
-if [ ! -f "${PLATFORM_FILE}" ]; then
-    echo "ERROR: Platform file not found at ${PLATFORM_FILE}"
-    echo "Searching for platform files..."
-    find "${RENODE_ROOT}" -name "stm32h753.repl" 2>/dev/null | head -5 || true
-    exit 1
-fi
-
-echo "Platform file found at: ${PLATFORM_FILE}"
-
-# Change to firmware directory
-cd /opt/firmware
-
-# Create a modified Renode script with absolute path to platform file
-# This avoids the .renode-root file lookup issue
-cat > /opt/firmware/run-renode-absolute.resc <<EOF
-# Renode test script for STM32H753 (with absolute platform path)
-using sysbus
-
-mach create "stm32h753"
-
-# Use absolute path to platform file to avoid .renode-root lookup issues
-machine LoadPlatformDescription @${PLATFORM_FILE}
-
-sysbus LoadELF @/opt/firmware/wolfcrypt_test.elf
-
-# Connect USART3 to the console for wolfCrypt output
-showAnalyzer usart3
-
-# Start emulation and run for a long time
-# The entrypoint script will kill Renode when test completes
-emulation RunFor "600s"
-EOF
-
-# Start Renode in background, output to log (unbuffered)
-# Use the modified script with absolute path
-echo "Starting Renode with command: ${RENODE_BIN} --disable-xwt --console -e \"i @/opt/firmware/run-renode-absolute.resc\""
-stdbuf -oL -eL "${RENODE_BIN}" --disable-xwt --console -e "i @/opt/firmware/run-renode-absolute.resc" > "${LOG}" 2>&1 &
-RENODE_PID=$!
-echo "Renode PID: $RENODE_PID"
-
-# Monitor the log for completion, errors, and flush output frequently
-START_TIME=$(date +%s)
-RESULT=""
-LAST_LOG_SIZE=0
-
-while true; do
-    # Check if Renode is still running
-    if ! kill -0 "$RENODE_PID" 2>/dev/null; then
-        break
-    fi
-
-    # Flush new log content to stdout (unbuffered)
-    if [ -f "${LOG}" ]; then
-        CURRENT_LOG_SIZE=$(stat -f%z "${LOG}" 2>/dev/null || stat -c%s "${LOG}" 2>/dev/null || echo 0)
-        if [ "$CURRENT_LOG_SIZE" -gt "$LAST_LOG_SIZE" ]; then
-            # Output new lines
-            tail -c +$((LAST_LOG_SIZE + 1)) "${LOG}" 2>/dev/null | head -c $((CURRENT_LOG_SIZE - LAST_LOG_SIZE))
-            LAST_LOG_SIZE=$CURRENT_LOG_SIZE
-        fi
-    fi
-
-    # Check for Renode errors (must check before completion to catch errors early)
-    if grep -q "\[ERROR\]" "${LOG}" 2>/dev/null; then
-        echo ""
-        echo "ERROR: Renode reported an error!"
-        RESULT="renode_error"
-        break
-    fi
-
-    # Check for completion messages
-    if grep -q "=== wolfCrypt test passed! ===" "${LOG}" 2>/dev/null; then
-        RESULT="passed"
-        break
-    fi
-
-    if grep -q "=== wolfCrypt test FAILED ===" "${LOG}" 2>/dev/null; then
-        RESULT="failed"
-        break
-    fi
-
-    # Check timeout
-    CURRENT_TIME=$(date +%s)
-    ELAPSED=$((CURRENT_TIME - START_TIME))
-    if [ "$ELAPSED" -ge "$TIMEOUT" ]; then
-        echo ""
-        echo "Timeout after ${TIMEOUT} seconds"
-        RESULT="timeout"
-        break
-    fi
-
-    sleep 0.5
-done
-
-# Kill Renode if still running
-if kill -0 "$RENODE_PID" 2>/dev/null; then
-    kill "$RENODE_PID" 2>/dev/null || true
-    wait "$RENODE_PID" 2>/dev/null || true
-fi
-
-# Show the log output
-cat "${LOG}"
-
-# Report result
-case "$RESULT" in
-    passed)
-        echo ""
-        echo "wolfCrypt tests completed successfully."
-        exit 0
-        ;;
-    failed)
-        echo ""
-        echo "wolfCrypt tests FAILED."
-        exit 1
-        ;;
-    renode_error)
-        echo ""
-        echo "Renode reported an error - test aborted."
-        exit 1
-        ;;
-    timeout)
-        echo ""
-        echo "wolfCrypt tests timed out after ${TIMEOUT} seconds."
-        exit 1
-        ;;
-    *)
-        echo ""
-        echo "wolfCrypt tests did not report a result."
-        exit 1
-        ;;
-esac
-

.github/renode-test/stm32h753/main.c

@@ -1,137 +0,0 @@
-/* main.c - Entry point for wolfCrypt test on STM32H753 under Renode
- *
- * Runs the wolfCrypt test suite with output via USART3.
- */
-
-#include <stdint.h>
-#include <stddef.h>
-#include <stdio.h>
-
-/* wolfCrypt test entry point */
-extern int wolfcrypt_test(void *args);
-
-/* USART3 registers (STM32H7) */
-#define USART3_BASE     0x40004800UL
-#define USART3_CR1      (*(volatile uint32_t *)(USART3_BASE + 0x00))
-#define USART3_BRR      (*(volatile uint32_t *)(USART3_BASE + 0x0C))
-#define USART3_ISR      (*(volatile uint32_t *)(USART3_BASE + 0x1C))
-#define USART3_TDR      (*(volatile uint32_t *)(USART3_BASE + 0x28))
-
-#define USART_CR1_UE    (1 << 0)
-#define USART_CR1_TE    (1 << 3)
-#define USART_ISR_TXE   (1 << 7)
-
-/* RCC registers for enabling USART3 clock */
-#define RCC_BASE        0x58024400UL
-#define RCC_APB1LENR    (*(volatile uint32_t *)(RCC_BASE + 0xE8))
-#define RCC_APB1LENR_USART3EN (1 << 18)
-
-static void uart_init(void)
-{
-    /* Enable USART3 clock */
-    RCC_APB1LENR |= RCC_APB1LENR_USART3EN;
-
-    /* Configure USART3: 115200 baud at 64MHz HSI */
-    USART3_BRR = 64000000 / 115200;
-    USART3_CR1 = USART_CR1_UE | USART_CR1_TE;
-}
-
-static void uart_putc(char c)
-{
-    while (!(USART3_ISR & USART_ISR_TXE))
-        ;
-    USART3_TDR = c;
-}
-
-static void uart_puts(const char *s)
-{
-    while (*s) {
-        if (*s == '\n')
-            uart_putc('\r');
-        uart_putc(*s++);
-    }
-}
-
-/* newlib _write syscall - redirects printf to UART */
-int _write(int fd, const char *buf, int len)
-{
-    (void)fd;
-    for (int i = 0; i < len; i++) {
-        if (buf[i] == '\n')
-            uart_putc('\r');
-        uart_putc(buf[i]);
-    }
-    return len;
-}
-
-/* Heap management for malloc - required by printf with format strings */
-extern char __heap_start__;
-extern char __heap_end__;
-
-void *_sbrk(ptrdiff_t incr)
-{
-    static char *heap_ptr = NULL;
-    char *prev_heap_ptr;
-
-    if (heap_ptr == NULL) {
-        heap_ptr = &__heap_start__;
-    }
-
-    prev_heap_ptr = heap_ptr;
-
-    if (heap_ptr + incr > &__heap_end__) {
-        /* Out of heap memory */
-        return (void *)-1;
-    }
-
-    heap_ptr += incr;
-    return prev_heap_ptr;
-}
-
-/* Simple counter for time - used by GENSEED_FORTEST */
-static volatile uint32_t tick_counter = 0;
-
-/* time() stub for wolfSSL GENSEED_FORTEST */
-#include <time.h>
-time_t time(time_t *t)
-{
-    tick_counter += 12345;  /* Simple pseudo-random increment */
-    time_t val = (time_t)tick_counter;
-    if (t)
-        *t = val;
-    return val;
-}
-
-/* Result variable - can be monitored by Renode at fixed address */
-volatile int test_result __attribute__((section(".data"))) = -1;
-volatile int test_complete __attribute__((section(".data"))) = 0;
-
-
-int main(int argc, char **argv)
-{
-    (void)argc;
-    (void)argv;
-
-    setvbuf(stdin, NULL, _IONBF, 0);
-    setvbuf(stdout, NULL, _IONBF, 0);
-    setvbuf(stderr, NULL, _IONBF, 0);
-    uart_init();
-    uart_puts("\n\n=== Starting wolfCrypt test ===\n\n");
-
-    test_result = wolfcrypt_test(NULL);
-    test_complete = 1;
-
-    if (test_result == 0) {
-        uart_puts("\n\n=== wolfCrypt test passed! ===\n");
-    } else {
-        uart_puts("\n\n=== wolfCrypt test FAILED ===\n");
-    }
-
-    /* Spin forever after the test completes */
-    while (1) {
-        __asm__ volatile ("wfi");
-    }
-
-    return test_result;
-}
-

.github/renode-test/stm32h753/run-renode.resc

@@ -1,20 +0,0 @@
-# Renode test script for STM32H753
-# Note: @platforms/cpus/stm32h753.repl is relative to Renode root
-# If RENODE_ROOT is set, Renode will use it; otherwise it looks for .renode-root file
-using sysbus
-
-mach create "stm32h753"
-
-# Try relative path first (works if RENODE_ROOT or .renode-root is set correctly)
-# If this fails, the absolute path will be tried in entrypoint.sh
-machine LoadPlatformDescription @platforms/cpus/stm32h753.repl
-
-sysbus LoadELF @/opt/firmware/wolfcrypt_test.elf
-
-# Connect USART3 to the console for wolfCrypt output
-showAnalyzer usart3
-
-# Start emulation and run for a long time
-# The entrypoint script will kill Renode when test completes
-emulation RunFor "600s"
-

.github/renode-test/stm32h753/startup_stm32h753.c

@@ -1,101 +0,0 @@
-/* Minimal startup code for STM32H753 running under Renode */
-
-#include <stdint.h>
-#include <stddef.h>
-
-extern int main(int argc, char** argv);
-
-void Default_Handler(void);
-void Reset_Handler(void);
-
-/* Symbols provided by the linker script */
-extern unsigned long _estack;
-extern unsigned long __data_start__;
-extern unsigned long __data_end__;
-extern unsigned long __bss_start__;
-extern unsigned long __bss_end__;
-extern unsigned long _sidata; /* start of .data in flash */
-
-/* Minimal init_array support */
-extern void (*__preinit_array_start[])(void);
-extern void (*__preinit_array_end[])(void);
-extern void (*__init_array_start[])(void);
-extern void (*__init_array_end[])(void);
-
-static void call_init_array(void)
-{
-    size_t count, i;
-
-    count = __preinit_array_end - __preinit_array_start;
-    for (i = 0; i < count; i++)
-        __preinit_array_start[i]();
-
-    count = __init_array_end - __init_array_start;
-    for (i = 0; i < count; i++)
-        __init_array_start[i]();
-}
-
-void Reset_Handler(void)
-{
-    unsigned long *src, *dst;
-
-    /* Copy .data from flash to RAM */
-    src = &_sidata;
-    for (dst = &__data_start__; dst < &__data_end__;)
-        *dst++ = *src++;
-
-    /* Zero .bss */
-    for (dst = &__bss_start__; dst < &__bss_end__;)
-        *dst++ = 0;
-
-    /* Call static constructors */
-    call_init_array();
-
-    /* Call main */
-    (void)main(0, (char**)0);
-
-    /* Infinite loop after main returns */
-    while (1) {
-        __asm__ volatile ("wfi");
-    }
-}
-
-void Default_Handler(void)
-{
-    while (1) {
-        __asm__ volatile ("wfi");
-    }
-}
-
-/* Exception handlers - all weak aliases to Default_Handler */
-void NMI_Handler(void) __attribute__((weak, alias("Default_Handler")));
-void HardFault_Handler(void) __attribute__((weak, alias("Default_Handler")));
-void MemManage_Handler(void) __attribute__((weak, alias("Default_Handler")));
-void BusFault_Handler(void) __attribute__((weak, alias("Default_Handler")));
-void UsageFault_Handler(void) __attribute__((weak, alias("Default_Handler")));
-void SVC_Handler(void) __attribute__((weak, alias("Default_Handler")));
-void DebugMon_Handler(void) __attribute__((weak, alias("Default_Handler")));
-void PendSV_Handler(void) __attribute__((weak, alias("Default_Handler")));
-void SysTick_Handler(void) __attribute__((weak, alias("Default_Handler")));
-
-/* Vector table */
-__attribute__ ((section(".isr_vector"), used))
-void (* const g_pfnVectors[])(void) = {
-    (void (*)(void))(&_estack), /* Initial stack pointer */
-    Reset_Handler,              /* Reset Handler */
-    NMI_Handler,                /* NMI Handler */
-    HardFault_Handler,          /* Hard Fault Handler */
-    MemManage_Handler,          /* MPU Fault Handler */
-    BusFault_Handler,           /* Bus Fault Handler */
-    UsageFault_Handler,         /* Usage Fault Handler */
-    0,                          /* Reserved */
-    0,                          /* Reserved */
-    0,                          /* Reserved */
-    0,                          /* Reserved */
-    SVC_Handler,                /* SVCall Handler */
-    DebugMon_Handler,           /* Debug Monitor Handler */
-    0,                          /* Reserved */
-    PendSV_Handler,             /* PendSV Handler */
-    SysTick_Handler             /* SysTick Handler */
-    /* IRQ vectors would continue here */
-};

.github/renode-test/stm32h753/stm32h753.ld

@@ -1,109 +0,0 @@
-/* Minimal STM32H753 memory map for Renode run */
-MEMORY
-{
-  FLASH (rx)  : ORIGIN = 0x08000000, LENGTH = 2048K
-  DTCM  (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
-  RAM   (xrw) : ORIGIN = 0x24000000, LENGTH = 512K
-}
-
-_estack = ORIGIN(RAM) + LENGTH(RAM);
-_Min_Heap_Size = 128K;
-_Min_Stack_Size = 128K;
-
-ENTRY(Reset_Handler)
-
-SECTIONS
-{
-  .isr_vector :
-  {
-    . = ALIGN(4);
-    KEEP(*(.isr_vector))
-    . = ALIGN(4);
-  } > FLASH
-
-  .text :
-  {
-    . = ALIGN(4);
-    *(.text*)
-    *(.rodata*)
-    *(.glue_7)
-    *(.glue_7t)
-    *(.eh_frame)
-    . = ALIGN(4);
-    _etext = .;
-  } > FLASH
-
-  .ARM.extab :
-  {
-    *(.ARM.extab* .gnu.linkonce.armextab.*)
-  } > FLASH
-
-  .ARM.exidx :
-  {
-    __exidx_start = .;
-    *(.ARM.exidx*)
-    __exidx_end = .;
-  } > FLASH
-
-  .preinit_array :
-  {
-    PROVIDE_HIDDEN(__preinit_array_start = .);
-    KEEP(*(.preinit_array*))
-    PROVIDE_HIDDEN(__preinit_array_end = .);
-  } > FLASH
-
-  .init_array :
-  {
-    PROVIDE_HIDDEN(__init_array_start = .);
-    KEEP(*(SORT(.init_array.*)))
-    KEEP(*(.init_array*))
-    PROVIDE_HIDDEN(__init_array_end = .);
-  } > FLASH
-
-  .fini_array :
-  {
-    PROVIDE_HIDDEN(__fini_array_start = .);
-    KEEP(*(SORT(.fini_array.*)))
-    KEEP(*(.fini_array*))
-    PROVIDE_HIDDEN(__fini_array_end = .);
-  } > FLASH
-
-  /* Location in flash where .data will be stored */
-  _sidata = LOADADDR(.data);
-
-  .data :
-  {
-    . = ALIGN(4);
-    __data_start__ = .;
-    *(.data*)
-    . = ALIGN(4);
-    __data_end__ = .;
-  } > RAM AT> FLASH
-
-  .bss :
-  {
-    . = ALIGN(4);
-    __bss_start__ = .;
-    *(.bss*)
-    *(COMMON)
-    . = ALIGN(4);
-    __bss_end__ = .;
-  } > RAM
-
-  .heap_stack (NOLOAD):
-  {
-    . = ALIGN(8);
-    PROVIDE(__heap_start__ = .);
-    . = . + _Min_Heap_Size;
-    PROVIDE(__heap_end__ = .);
-    PROVIDE(end = __heap_end__);
-    . = ALIGN(8);
-    PROVIDE(__stack_start__ = .);
-    . = . + _Min_Stack_Size;
-    PROVIDE(__stack_end__ = .);
-  } > RAM
-}
-
-PROVIDE(_init = 0);
-PROVIDE(_fini = 0);
-

.github/renode-test/stm32h753/stm32h7xx_hal_conf.h

@@ -1,208 +0,0 @@
-/* Minimal HAL configuration for STM32H753 wolfCrypt build under Renode.
- * RNG and CRYP HAL are enabled. CRYP is used for AES_GCM only (other AES modes disabled).
- * HASH is disabled as Renode doesn't implement it.
- */
-
-#ifndef STM32H7xx_HAL_CONF_H
-#define STM32H7xx_HAL_CONF_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* -------------------------  Module Selection  ----------------------------- */
-#define HAL_MODULE_ENABLED
-#define HAL_CORTEX_MODULE_ENABLED
-#define HAL_RCC_MODULE_ENABLED
-#define HAL_GPIO_MODULE_ENABLED
-#define HAL_RNG_MODULE_ENABLED
-#define HAL_CRYP_MODULE_ENABLED  /* Enabled for AES_GCM only */
-/* #define HAL_HASH_MODULE_ENABLED */  /* Disabled - Renode doesn't implement HASH */
-#define HAL_DMA_MODULE_ENABLED
-#define HAL_FLASH_MODULE_ENABLED
-#define HAL_PWR_MODULE_ENABLED
-#define HAL_EXTI_MODULE_ENABLED
-
-/* Disabled modules (explicit for clarity) */
-/* #define HAL_SDRAM_MODULE_ENABLED */
-
-/* -------------------------  Oscillator Values  ---------------------------- */
-#if !defined(HSE_VALUE)
-#define HSE_VALUE    25000000UL  /* External oscillator frequency in Hz */
-#endif
-
-#if !defined(HSE_STARTUP_TIMEOUT)
-#define HSE_STARTUP_TIMEOUT  100UL  /* Time out for HSE start up in ms */
-#endif
-
-#if !defined(CSI_VALUE)
-#define CSI_VALUE    4000000UL   /* Internal oscillator CSI in Hz */
-#endif
-
-#if !defined(HSI_VALUE)
-#define HSI_VALUE    64000000UL  /* Internal oscillator HSI in Hz */
-#endif
-
-#if !defined(HSI48_VALUE)
-#define HSI48_VALUE  48000000UL  /* Value of the Internal High Speed oscillator for USB in Hz */
-#endif
-
-#if !defined(LSE_VALUE)
-#define LSE_VALUE    32768UL     /* External low speed oscillator in Hz */
-#endif
-
-#if !defined(LSE_STARTUP_TIMEOUT)
-#define LSE_STARTUP_TIMEOUT  5000UL  /* Time out for LSE start up in ms */
-#endif
-
-#if !defined(LSI_VALUE)
-#define LSI_VALUE    32000UL     /* Internal low speed oscillator in Hz */
-#endif
-
-#if !defined(EXTERNAL_CLOCK_VALUE)
-#define EXTERNAL_CLOCK_VALUE  12288000UL  /* External audio clock in Hz */
-#endif
-
-/* -------------------------  System Configuration  -------------------------- */
-#define VDD_VALUE                  3300UL  /* Value of VDD in mV */
-#define TICK_INT_PRIORITY          0x0FUL  /* Tick interrupt priority */
-#define USE_RTOS                   0U
-#define PREFETCH_ENABLE            0U
-#define USE_HAL_ADC_REGISTER_CALLBACKS         0U
-#define USE_HAL_CEC_REGISTER_CALLBACKS         0U
-#define USE_HAL_COMP_REGISTER_CALLBACKS        0U
-#define USE_HAL_CORDIC_REGISTER_CALLBACKS      0U
-#define USE_HAL_CRYP_REGISTER_CALLBACKS        0U
-#define USE_HAL_DAC_REGISTER_CALLBACKS         0U
-#define USE_HAL_DCMI_REGISTER_CALLBACKS         0U
-#define USE_HAL_DFSDM_REGISTER_CALLBACKS       0U
-#define USE_HAL_DMA_REGISTER_CALLBACKS         0U
-#define USE_HAL_DMA2D_REGISTER_CALLBACKS       0U
-#define USE_HAL_DSI_REGISTER_CALLBACKS         0U
-#define USE_HAL_DTS_REGISTER_CALLBACKS         0U
-#define USE_HAL_ETH_REGISTER_CALLBACKS         0U
-#define USE_HAL_FDCAN_REGISTER_CALLBACKS       0U
-#define USE_HAL_FMAC_REGISTER_CALLBACKS        0U
-#define USE_HAL_GFXMMU_REGISTER_CALLBACKS      0U
-#define USE_HAL_HASH_REGISTER_CALLBACKS        0U
-#define USE_HAL_HCD_REGISTER_CALLBACKS         0U
-#define USE_HAL_HRTIM_REGISTER_CALLBACKS       0U
-#define USE_HAL_I2C_REGISTER_CALLBACKS         0U
-#define USE_HAL_I2S_REGISTER_CALLBACKS         0U
-#define USE_HAL_IRDA_REGISTER_CALLBACKS        0U
-#define USE_HAL_JPEG_REGISTER_CALLBACKS        0U
-#define USE_HAL_LPTIM_REGISTER_CALLBACKS       0U
-#define USE_HAL_LTDC_REGISTER_CALLBACKS        0U
-#define USE_HAL_MDIOS_REGISTER_CALLBACKS       0U
-#define USE_HAL_MMC_REGISTER_CALLBACKS         0U
-#define USE_HAL_NAND_REGISTER_CALLBACKS        0U
-#define USE_HAL_NOR_REGISTER_CALLBACKS         0U
-#define USE_HAL_OPAMP_REGISTER_CALLBACKS       0U
-#define USE_HAL_OSPI_REGISTER_CALLBACKS        0U
-#define USE_HAL_OTFDEC_REGISTER_CALLBACKS      0U
-#define USE_HAL_PCD_REGISTER_CALLBACKS         0U
-#define USE_HAL_PSSI_REGISTER_CALLBACKS        0U
-#define USE_HAL_QSPI_REGISTER_CALLBACKS        0U
-#define USE_HAL_RNG_REGISTER_CALLBACKS         0U
-#define USE_HAL_RTC_REGISTER_CALLBACKS         0U
-#define USE_HAL_SAI_REGISTER_CALLBACKS         0U
-#define USE_HAL_SD_REGISTER_CALLBACKS          0U
-#define USE_HAL_SDRAM_REGISTER_CALLBACKS       0U
-#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U
-#define USE_HAL_SMBUS_REGISTER_CALLBACKS       0U
-#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U
-#define USE_HAL_SPI_REGISTER_CALLBACKS         0U
-#define USE_HAL_SRAM_REGISTER_CALLBACKS         0U
-#define USE_HAL_SWPMI_REGISTER_CALLBACKS       0U
-#define USE_HAL_TIM_REGISTER_CALLBACKS         0U
-#define USE_HAL_UART_REGISTER_CALLBACKS        0U
-#define USE_HAL_USART_REGISTER_CALLBACKS       0U
-#define USE_HAL_WWDG_REGISTER_CALLBACKS        0U
-#define USE_HAL_XSPI_REGISTER_CALLBACKS        0U
-
-/* -------------------------  SPI peripheral configuration  ------------------ */
-#define USE_SPI_CRC  0U
-
-/* -------------------------  Assertion  ------------------------------------- */
-/* #define USE_FULL_ASSERT  1U */
-#define assert_param(expr)  ((void)0U)
-
-/* -------------------------  Ethernet Configuration  ------------------------ */
-#define ETH_TX_DESC_CNT  4U
-#define ETH_RX_DESC_CNT  4U
-#define ETH_MAC_ADDR0    0x02U
-#define ETH_MAC_ADDR1    0x00U
-#define ETH_MAC_ADDR2    0x00U
-#define ETH_MAC_ADDR3    0x00U
-#define ETH_MAC_ADDR4    0x00U
-#define ETH_MAC_ADDR5    0x00U
-
-/* -------------------------  Include HAL headers  --------------------------- */
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32h7xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32h7xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32h7xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32h7xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_EXTI_MODULE_ENABLED
-  #include "stm32h7xx_hal_exti.h"
-#endif /* HAL_EXTI_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32h7xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
-  #include "stm32h7xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
-  #include "stm32h7xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-/* CRYP enabled for AES_GCM only */
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32h7xx_hal_cryp.h"
-#endif
-
-/* #ifdef HAL_HASH_MODULE_ENABLED
-  #include "stm32h7xx_hal_hash.h"
-#endif */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t *file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* STM32H7xx_HAL_CONF_H */
-

.github/renode-test/stm32h753/toolchain-arm-none-eabi.cmake

@@ -1,24 +0,0 @@
-set(CMAKE_SYSTEM_NAME Generic)
-set(CMAKE_SYSTEM_PROCESSOR arm)
-
-set(CMAKE_TRY_COMPILE_TARGET_TYPE STATIC_LIBRARY)
-
-set(CMAKE_C_COMPILER arm-none-eabi-gcc)
-set(CMAKE_CXX_COMPILER arm-none-eabi-g++)
-set(CMAKE_ASM_COMPILER arm-none-eabi-gcc)
-
-set(CMAKE_AR arm-none-eabi-ar)
-set(CMAKE_RANLIB arm-none-eabi-ranlib)
-
-set(CMAKE_C_STANDARD 11)
-
-set(CPU_FLAGS "-mcpu=cortex-m7 -mthumb -mfpu=fpv5-d16 -mfloat-abi=hard")
-set(OPT_FLAGS "-Os -ffunction-sections -fdata-sections")
-set(CMSIS_INCLUDES "-I/opt/cmsis-device-h7/Include -I/opt/CMSIS_5/CMSIS/Core/Include -I/opt/firmware")
-
-set(CMAKE_C_FLAGS_INIT "${CPU_FLAGS} ${OPT_FLAGS} ${CMSIS_INCLUDES} -DSTM32H753xx")
-set(CMAKE_CXX_FLAGS_INIT "${CPU_FLAGS} ${OPT_FLAGS} ${CMSIS_INCLUDES} -DSTM32H753xx")
-set(CMAKE_ASM_FLAGS_INIT "${CPU_FLAGS}")
-
-set(CMAKE_EXE_LINKER_FLAGS_INIT "-Wl,--gc-sections -static")
-

.github/renode-test/stm32h753/user_settings.h

@@ -1,95 +0,0 @@
-/* user_settings_renode.h - wolfSSL/wolfCrypt configuration for STM32H753 under Renode
- *
- * Minimal, semihosting-friendly build for Cortex-M7 / STM32H753.
- * Hardware RNG and CRYPTO (AES-GCM only) are enabled via Renode's STM32H753 emulation.
- * HASH is disabled as Renode doesn't implement the HASH peripheral.
- */
-
-#ifndef USER_SETTINGS_RENODE_H
-#define USER_SETTINGS_RENODE_H
-
-/* -------------------------  Platform  ------------------------------------- */
-#define WOLFSSL_ARM_CORTEX_M
-#define WOLFSSL_STM32H7  /* STM32H7 series (includes H753) */
-#define WOLFSSL_STM32_CUBEMX  /* Use STM32 HAL for CRYPTO */
-/* NO_STM32_CRYPTO is NOT defined, so CRYPTO will be enabled */
-/* Disable HASH - Renode doesn't implement HASH peripheral */
-#define NO_STM32_HASH
-
-/* Required for consistent math library settings (CTC_SETTINGS) */
-#define SIZEOF_LONG 4
-#define SIZEOF_LONG_LONG 8
-
-/* -------------------------  Threading / OS  ------------------------------- */
-#define SINGLE_THREADED
-
-/* -------------------------  Filesystem / I/O  ----------------------------- */
-#define WOLFSSL_NO_CURRDIR
-#define NO_FILESYSTEM
-#define NO_WRITEV
-
-/* -------------------------  wolfCrypt Only  ------------------------------- */
-#define WOLFCRYPT_ONLY
-#define NO_DH
-#define NO_DSA
-/* Disable DES/3DES - Renode CRYPTO only supports AES_GCM */
-#define NO_DES
-#define NO_DES3
-
-/* -------------------------  AES Mode Configuration  ----------------------- */
-/* Disable all AES modes except GCM - Renode CRYPTO only supports AES_GCM */
-/* NO_AES_CBC prevents HAVE_AES_CBC from being defined in settings.h */
-#define NO_AES_CBC
-
-/* -------------------------  RNG Configuration  ---------------------------- */
-/* Enable STM32 hardware RNG (emulated by Renode) using direct register access */
-#define WOLFSSL_STM32_RNG_NOLIB
-/* NO_STM32_RNG is NOT defined, so STM32_RNG will be auto-enabled */
-#define NO_DEV_RANDOM
-#define HAVE_HASHDRBG
-
-/* -------------------------  Math Library  --------------------------------- */
-/* Use SP Math (Single Precision) - modern, efficient, and secure */
-#define WOLFSSL_SP_MATH_ALL
-#define WOLFSSL_HAVE_SP_RSA
-#define WOLFSSL_HAVE_SP_DH
-#define WOLFSSL_HAVE_SP_ECC
-#define WOLFSSL_SP_ARM_CORTEX_M_ASM
-#define SP_WORD_SIZE 32
-
-/* -------------------------  Crypto Hardening  ----------------------------- */
-#define WC_RSA_BLINDING
-#define ECC_TIMING_RESISTANT
-
-/* -------------------------  Size Optimization  ---------------------------- */
-#define WOLFSSL_SMALL_STACK
-
-/* -------------------------  Test Configuration  --------------------------- */
-/* Use smaller key sizes for faster test runs in emulation */
-#define BENCH_EMBEDDED
-
-/* Use our own main() instead of the one in test.c */
-#define NO_MAIN_DRIVER
-
-/* -------------------------  Post-options.h cleanup  ----------------------- */
-/* Ensure unsupported AES modes stay disabled even after options.h processing */
-/* These undefs will be processed after options.h includes, preventing
- * Renode-unsupported modes from being used */
-#ifdef HAVE_AES_CBC
-#undef HAVE_AES_CBC
-#endif
-#ifdef HAVE_AES_ECB
-#undef HAVE_AES_ECB
-#endif
-#ifdef HAVE_AES_CTR
-#undef HAVE_AES_CTR
-#endif
-#ifdef HAVE_AES_CFB
-#undef HAVE_AES_CFB
-#endif
-#ifdef HAVE_AES_OFB
-#undef HAVE_AES_OFB
-#endif
-
-#endif /* USER_SETTINGS_RENODE_H */
-

.github/workflows/ada.yml

@@ -1,34 +0,0 @@
-name: WolfSSL Ada Build Tests
-
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-jobs:
-  build:
-
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-latest
-
-    steps:
-    - uses: actions/checkout@master
-
-    - name: Install gnat
-      run: |
-        sudo apt-get update
-        sudo apt-get install -y gnat gprbuild
-
-    - name: Checkout wolfssl
-      uses: actions/checkout@master
-      with:
-        repository: wolfssl/wolfssl
-        path: wolfssl
-
-    - name: Build wolfssl Ada
-      working-directory: ./wolfssl/wrapper/Ada
-      run: |
-        mkdir obj
-        gprbuild default.gpr
-        gprbuild examples.gpr

.github/workflows/arduino.yml

@@ -1,465 +0,0 @@
-name: Arduino CI Build (1 of 4) wolfssl
-
-#
-# Test fetches wolfssl-examples/Arduino and uses local, latest github master branch wolfssl
-#
-# These 4 workflows across 3 repos are interdependent for the current $REPO_OWNER:
-#
-# THIS Arduino CI Build 1: https://github.com/$REPO_OWNER/wolfssl          #  /.github/workflows/arduino.yml
-#   - Builds Arduino library from local clone of wolfssl master branch
-#   - Fetches examples from https://github.com/$REPO_OWNER/wolfssl-examples
-#
-# Arduino CI Build 2: https://github.com/$REPO_OWNER/wolfssl-examples      #  /.github/workflows/arduino-release.yml
-#    - Tests examples based on latest published release of Arduino library, NOT latest on wolfssl github.
-#    - Should be identical to Arduino CI Build 3 in every way but wolfssl install.
-#    - Copies only compile script from wolfssl-examples
-#    - Builds local examples
-#    - No other repos used
-#
-# Arduino CI Build 3: https://github.com/$REPO_OWNER/wolfssl-examples      #  /.github/workflows/arduino.yml
-#   - Fetches current wolfSSL from https://github.com/$REPO_OWNER/wolfssl
-#   - Creates an updated Arduino library
-#   - Compiles local examples
-#   - Contains the source of `compile-all-examples.sh` and respective board-list.txt
-#
-# Arduino CI Build 4: https://github.com/$REPO_OWNER/Arduino-wolfssl       #  /.github/workflows/arduino.yml
-#    - Assembles and installs an updated Arduino wolfssl library from LOCAL wolfssl master source
-#    - Copies only compile script copied from wolfssl-examples
-#    - Builds local examples
-#    - No other repos used
-#
-#
-#                                   ** NOTE TO MAINTAINERS **
-#
-#           Consider using winmerge or similar tool to keep the 4 arduino[-release].yml files in relative sync.
-#           Although there are some specific differences, most of the contents are otherwise identical.
-#
-# See https://github.com/wolfSSL/Arduino-wolfSSL
-#
-# To test locally:
-# cd [your WOLFSSL_ROOT], e.g. cd /mnt/c/workspace/wolfssl-$USER
-# [optional checkout]     e.g. git checkout tags/v5.8.4-stable
-# pushd ./IDE/ARDUINO
-# export ARDUINO_ROOT="$HOME/Arduino/libraries"
-# ./wolfssl-arduino.sh INSTALL
-# cd [your WOLFSSL_EXAMPLES_ROOT] e.g. /mnt/c/workspace/wolfssl-examples-$USER
-#
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ '**', 'master', 'main', 'release/**' ]
-    paths:
-      # Specific to this Arduino CI Build (1 of 4)
-      - '.github/workflows/arduino.yml'
-      - 'IDE/ARDUINO/**'
-      - 'src/**'
-      - 'wolfcrypt/**'
-      - 'wolfssl/**'
-  pull_request:
-    branches: [ '**' ]
-    paths:
-      - '.github/workflows/arduino.yml'
-      - 'IDE/ARDUINO/**'
-      - 'src/**'
-      - 'wolfcrypt/**'
-      - 'wolfssl/**'
-  workflow_dispatch:
-
-concurrency:
-  # Same branch push cancels other jobs. Other PR branches untouched
-
-  group: ${{ github.workflow }}-${{ github.ref_name }}
-  cancel-in-progress: true
-
-# END OF COMMON SECTION
-
-jobs:
-  build:
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-latest
-
-    strategy:
-      fail-fast: false
-      matrix:
-        fqbn:
-          # When editing this list, be sure to also edit file: board_list.txt
-          #   The compile-all-examples.sh optionally takes a FQBN parameter to
-          #   optionally compile all examples ONLY for the respective fully qualified board name.
-          # See https://github.com/wolfSSL/wolfssl-examples/blob/master/Arduino/sketches/board_list.txt
-
-          - arduino:avr:ethernet
-          - arduino:avr:leonardoeth
-          - arduino:avr:mega
-          - arduino:avr:nano
-          - arduino:avr:uno
-          - arduino:avr:yun
-          - arduino:samd:mkrwifi1010
-          - arduino:samd:mkr1000
-          - arduino:samd:mkrfox1200
-          - arduino:mbed_edge:edge_control
-          - arduino:mbed_nano:nanorp2040connect
-          - arduino:mbed_portenta:envie_m7
-          - arduino:mbed_portenta:portenta_x8
-          - arduino:renesas_uno:unor4wifi
-          - arduino:sam:arduino_due_x
-          - arduino:samd:arduino_zero_native
-          - arduino:samd:tian
-          - esp32:esp32:esp32
-          - esp32:esp32:esp32s2
-          - esp32:esp32:esp32s3
-          - esp32:esp32:esp32c3
-          - esp32:esp32:esp32c6
-          - esp32:esp32:esp32h2
-          - esp8266:esp8266:generic
-          - teensy:avr:teensy40
-
-          # Not yet supported, not in standard library
-          # - esp32:esp32:nano_nora
-
-          # End strategy matrix
-    env:
-      REPO_OWNER: ${{ github.repository_owner }}
-
-    steps:
-      - name: Free disk space
-        run: |
-          sudo rm -rf /usr/share/dotnet
-          sudo rm -rf /usr/local/lib/android
-          sudo rm -rf /opt/ghc
-          sudo rm -rf /opt/hostedtoolcache/CodeQL
-          sudo apt-get clean
-          df -h
-
-      - name: Checkout Repository
-        uses: actions/checkout@v4
-
-      - name: Install Arduino CLI
-        run: |
-          # Script to fetch and run install.sh from arduino/arduino-cli
-
-          # The install script will test to see if the recently installed apps in the path
-          # So set it up in advance:
-          mkdir -p "${PWD}/bin"
-          echo "${PWD}/bin" >> $GITHUB_PATH
-
-          # Sets the install directory to a consistent path at the repo root.
-          ROOT_BIN="$GITHUB_WORKSPACE/bin"
-
-          # Ensures that BINDIR exists before the installer runs
-          mkdir -p "$ROOT_BIN"
-
-          # Save as a global environment variable
-          echo "$ROOT_BIN" >> "$GITHUB_PATH"
-
-          # Download and run install script from Arduino:
-          # -S show errors; -L follow redirects; -v Verbose
-          set +e                 # don't abort on error
-          set -o pipefail
-
-          curl -vSL --retry 5 --retry-delay 10 \
-             https://raw.githubusercontent.com/arduino/arduino-cli/master/install.sh  \
-             | sh -x
-          rc=$?
-          c_rc=${PIPESTATUS[0]}  # curl's exit code
-          s_rc=${PIPESTATUS[1]}  # sh's  exit code
-
-          set -e                 # restore default abort-on-error
-
-          # If there was a curl error, we have our own local copy that is more reliable and can add our own debugging
-          if [ "$rc" -ne 0 ]; then
-            echo "Primary install failed: curl=$c_rc, sh=$s_rc. Falling back..." >&2
-            echo "Using local copy of arduino_install.sh"
-            pushd ./Arduino/sketches
-              chmod +x ./arduino_install.sh
-
-              # Mimic curl install, does not use current directory:
-              BINDIR="$ROOT_BIN" sh -x ./arduino_install.sh
-            popd
-          else
-            echo "Alternative install script not needed."
-          fi
-
-      - name: Confirm Arduino CLI Install
-        run: arduino-cli version
-
-      - name: Derive CORE_ID (vendor:arch from FQBN)
-        run: |
-          CORE_ID="$(echo '${{ matrix.fqbn }}' | cut -d: -f1-2)"
-          echo "CORE_ID=$CORE_ID" >> "$GITHUB_ENV"
-
-      - name: Setup Arduino CLI
-        run: |
-          arduino-cli config init
-
-          # wait 10 minutes for big downloads (or use 0 for no limit)
-          arduino-cli config set network.connection_timeout 600s
-
-          arduino-cli config add board_manager.additional_urls https://www.pjrc.com/teensy/package_teensy_index.json
-          arduino-cli config add board_manager.additional_urls https://arduino.esp8266.com/stable/package_esp8266com_index.json
-          arduino-cli core update-index
-
-          echo "CORE_ID: $CORE_ID"
-          arduino-cli core install "$CORE_ID"
-
-          # The above is instead of:
-          # arduino-cli core install esp32:esp32            # ESP32
-          # arduino-cli core install arduino:avr            # Arduino Uno, Mega, Nano
-          # arduino-cli core install arduino:sam            # Arduino Due
-          # arduino-cli core install arduino:samd           # Arduino Zero
-          # arduino-cli core install teensy:avr             # PJRC Teensy
-          # arduino-cli core install esp8266:esp8266        # ESP8266
-          # arduino-cli core install arduino:mbed_nano      # nanorp2040connect
-          # arduino-cli core install arduino:mbed_portenta  # portenta_h7_m7
-          # arduino-cli core install arduino:mbed_edge
-          # arduino-cli core install arduino:renesas_uno
-
-          # For reference:
-
-          # mbed nano not yet tested
-          # sudo "/home/$USER/.arduino15/packages/arduino/hardware/mbed_nano/4.2.4/post_install.sh"
-
-          # Always install networking (not part of FQBN matrix)
-          # The first one also creates directory: /home/runner/Arduino/libraries
-          arduino-cli lib install "ArduinoJson"           # Example dependency
-          arduino-cli lib install "WiFiNINA"              # ARDUINO_SAMD_NANO_33_IOT
-          arduino-cli lib install "Ethernet"              # Install Ethernet library
-          arduino-cli lib install "Bridge"                # Pseudo-network for things like arduino:samd:tian
-
-      - name: Set Job Environment Variables
-        run: |
-          # Script to assign some common environment variables after everything is installed
-
-          ICON_OK=$(printf "\xE2\x9C\x85")
-          ICON_FAIL=$(printf "\xE2\x9D\x8C")
-
-          echo "GITHUB_WORK=$(realpath           "$GITHUB_WORKSPACE/../..")"  >> "$GITHUB_ENV"
-          echo "ARDUINO_ROOT=$(realpath          "$HOME/Arduino/libraries")"  >> "$GITHUB_ENV"
-
-          # Show predefined summary:
-          echo "GITHUB_WORKSPACE      = $GITHUB_WORKSPACE"
-
-          # Show assigned build:env values (e.g. "wolfssl", "gojimmpi" or other owners):
-          echo "REPO_OWNER            = $REPO_OWNER"
-
-          echo "GITHUB_ENV=$GITHUB_ENV"
-
-          # Show our custom values:
-          echo "GITHUB_WORK           = $GITHUB_WORK"
-          echo "ARDUINO_ROOT          = $ARDUINO_ROOT"
-
-          # WOLFSSL_EXAMPLES_ROOT is the repo root, not example location
-          echo "WOLFSSL_EXAMPLES_ROOT = $WOLFSSL_EXAMPLES_ROOT"
-
-      - name: Cache Arduino Packages
-        uses: actions/cache@v4
-        with:
-          path: |
-            ~/.arduino15
-            ~/.cache/arduino
-            # Exclude staging directory from cache to save space
-            !~/.arduino15/staging
-
-            # Arduino libraries
-            # Specific to Arduino CI Build (2 of 4) Arduinbo Release wolfSSL for Local Examples
-            # Include all libraries, as the latest Arduino-wolfSSL will only change upon release.
-            ~/Arduino/libraries
-            # Ensure wolfssl is not cached, we're always using the latest. See separate cache.
-            !~/Arduino/libraries/wolfssl
-          key: arduino-${{ runner.os }}-${{ env.CORE_ID }}-${{ hashFiles('Arduino/sketches/board_list.txt') }}
-
-          restore-keys: |
-               arduino-${{ runner.os }}-${{ env.CORE_ID }}-
-               arduino-${{ runner.os }}-
-
-      - name: Get wolfssl-examples
-        run: |
-          # Fetch Arduino examples from the wolfssl-examples repo
-          echo "Start pwd:"
-          pwd
-          # we're typically in $GITHUB_WORKSPACE=/home/runner/work/wolfssl/wolfssl
-          # goto /home/runner/work to fetch wolfssl-examples
-
-          echo "Current pwd for wolfssl-examples clone fetch: $(pwd)"
-          GITHUB_WORK=$(realpath "$GITHUB_WORKSPACE/../..")
-          echo "GITHUB_WORKSPACE=$GITHUB_WORKSPACE"
-
-          # Typically /home/runner/work
-          echo "GITHUB_WORK=$GITHUB_WORK"
-
-          pushd "$GITHUB_WORK"
-            echo "Updated pwd for wolfssl-examples clone fetch: $(pwd)"
-
-            git clone --depth 1 https://github.com/$REPO_OWNER/wolfssl-examples.git wolfssl-examples-publish
-
-            cd ./wolfssl-examples-publish
-            echo "WOLFSSL_EXAMPLES_ROOT=$(pwd)"
-
-            echo "Path for wolfssl-examples-publish: $(pwd)"
-          popd # GITHUB_WORK
-
-
-          # ** END ** Get wolfssl-examples
-
-      - name: Install wolfSSL Arduino library
-        run: |
-          # Run the local wolfssl-arduino.sh install script to install wolfssl Arduino library.
-
-          echo "Installing wolfSSL Arduino library (no cache hit)."
-          rm -rf "$ARDUINO_ROOT/wolfssl"
-
-          # Methods of installing Arduino library:
-          #   1) arduino-cli lib install "wolfSSL"
-          #   2) manual copy of files (typical of the Arduino-wolfssl repo)
-          #   3) run ./wolfssl-arduino.sh INSTALL (typical of the wolfssl repo)
-
-          echo "Current pwd for wolfssl-examples clone fetch: $(pwd)"
-          GITHUB_WORK=$(realpath "$GITHUB_WORKSPACE/../..")
-          echo "GITHUB_WORKSPACE=$GITHUB_WORKSPACE"
-
-          # Typically /home/runner/work
-          echo "GITHUB_WORK=$GITHUB_WORK"
-          pwd
-          pushd ./IDE/ARDUINO
-
-            # Set default ARDUINO_ROOT to Arduino library.
-            export ARDUINO_ROOT="$HOME/Arduino/libraries"
-            export WOLFSSL_EXAMPLES_ROOT="$GITHUB_WORK/wolfssl-examples-publish"
-
-            echo "ARDUINO_ROOT:          $WOLFSSL_EXAMPLES_ROOT"
-            echo "WOLFSSL_EXAMPLES_ROOT: $WOLFSSL_EXAMPLES_ROOT"
-
-            bash ./wolfssl-arduino.sh INSTALL  # Install wolfSSL library
-          popd
-
-          # ** END ** Install wolfSSL Arduino library
-
-      - name: List installed Arduino libraries
-        run: arduino-cli lib list
-
-      - name: Get compile-all-examples.sh
-        run: |
-          # Fetch compile script FROM THE CURRENT OWNER.
-          # This repo is Arduino-wolfssl; we'll fetch the script from the wolfssl-examples for the same repository owner.
-          echo "Repository owner: $REPO_OWNER"
-          echo "Current directory: $PWD"
-          echo "Current pwd for wolfssl-examples clone fetch: $PWD"
-          WOLFSSL_EXAMPLES_DIRECTORY="$ARDUINO_ROOT/wolfssl/examples"
-          THIS_BOARD_LIST="board_list.txt"
-          echo "WOLFSSL_EXAMPLES_DIRECTORY=$WOLFSSL_EXAMPLES_DIRECTORY"
-
-          # Fetch script and board list into WOLFSSL_EXAMPLES_DIRECTORY
-          echo "Fetching board_list.txt from REPO_OWNER=$REPO_OWNER"
-          curl -L "https://raw.githubusercontent.com/$REPO_OWNER/wolfssl-examples/master/Arduino/sketches/board_list.txt"  \
-               -o "$WOLFSSL_EXAMPLES_DIRECTORY/$THIS_BOARD_LIST"
-
-          # Check if the first line is "404: Not Found" - which would indicate the curl path above is bad.
-          FILE="$WOLFSSL_EXAMPLES_DIRECTORY/board_list.txt"
-
-          # Ensure the file exists
-          if [[ ! -f "$FILE" ]]; then
-              echo "File not found: $FILE"
-              exit 1
-          fi
-
-          # Check if the first line is "404: Not Found"
-          if [[ $(head -n 1 "$FILE") == "404: Not Found" ]]; then
-              echo "The first line is '404: Not Found'"
-              exit 1
-          fi
-
-          # Fetch the compile script from repo: https://github.com/[$USER]/wolfssl-examples/
-          echo "Fetching compile-all-examples.sh from REPO_OWNER=$REPO_OWNER"
-          curl -L "https://raw.githubusercontent.com/$REPO_OWNER/wolfssl-examples/master/Arduino/sketches/compile-all-examples.sh"  \
-               -o "$WOLFSSL_EXAMPLES_DIRECTORY/compile-all-examples.sh"
-
-          # Check if the first line is "404: Not Found" - which would indicate the curl path above is bad.
-          FILE="$WOLFSSL_EXAMPLES_DIRECTORY/compile-all-examples.sh"
-
-          # Ensure the file exists
-          if [[ ! -f "$FILE" ]]; then
-              echo "File not found: $FILE"
-              exit 1
-          fi
-
-          # Check if the first line is "404: Not Found"
-          if [[ $(head -n 1 "$FILE") == "404: Not Found" ]]; then
-              echo "The first line is '404: Not Found'"
-              exit 1
-          fi
-
-          pushd "$WOLFSSL_EXAMPLES_DIRECTORY"
-            echo "Current directory:           $PWD"
-
-            echo "Current directory $PWD"
-            echo "Contents:"
-            ls -al
-            find ./ -type f | sort
-
-            # ensure we can execute the script here (permissions lost during curl fetch)
-            chmod +x ./compile-all-examples.sh
-            echo "Found compile script: $(ls -al ./compile-all-examples.sh ./$THIS_BOARD_LIST)"
-          popd
-
-          # ** END ** Get compile-all-examples.sh
-
-      # This will fail with Arduino published wolfSSL v5.7.6 and older
-      # as the examples moved. See https://github.com/wolfSSL/wolfssl/pull/8514
-      #
-      - name: Compile Arduino Sketches for Various Boards
-        run: |
-          # Call the compile-all-examples.sh script to compile all the examples for each of the fqbn names in the local copy of board_list.txt
-
-          echo "Current directory:           $PWD"
-          echo "ARDUINO_ROOT:                $ARDUINO_ROOT"
-          WOLFSSL_EXAMPLES_DIRECTORY="$ARDUINO_ROOT/wolfssl/examples"
-          echo "WOLFSSL_EXAMPLES_DIRECTORY:  $WOLFSSL_EXAMPLES_DIRECTORY"
-
-          # Limit the number of jobs to 1 to avoid running out of memory
-          export ARDUINO_CLI_MAX_JOBS=1
-
-          echo "Change directory to Arduino examples..."
-          pushd "$WOLFSSL_EXAMPLES_DIRECTORY"
-            chmod +x ./compile-all-examples.sh
-
-            # The script expects all the examples to be in the current directory.
-            # Along with ./board_list.txt from examples repo
-            echo "Current directory:           $PWD"
-            echo "Calling ./compile-all-examples.sh"
-            bash ./compile-all-examples.sh  ./board_list.txt "${{ matrix.fqbn }}"
-          popd
-          # End Compile Arduino Sketches for Various Boards
-
-      - name: Cleanup to Save Disk Space
-        if: always()
-        run: |
-          echo "Disk usage before cleanup:"
-          df -h
-          echo ""
-          echo "Cleaning up build artifacts and temporary files..."
-
-          # Clean up Arduino build artifacts
-          find ~/Arduino -name "*.hex" -delete 2>/dev/null || true
-          find ~/Arduino -name "*.elf" -delete 2>/dev/null || true
-          find ~/Arduino -name "*.bin" -delete 2>/dev/null || true
-          find ~/Arduino -name "build" -type d -exec rm -rf {} + 2>/dev/null || true
-
-          rm -rf ~/.arduino15/packages/esp32/tools || true
-          rm -rf ~/.arduino15/packages/esp32/hardware || true
-          rm -rf ~/.espressif || true
-
-          # Clean up staging directories
-          rm -rf ~/.arduino15/staging/* || true
-          rm -rf ~/.cache/arduino/* || true
-
-          # Clean up git clone of wolfssl-examples
-          GITHUB_WORK=$(realpath "$GITHUB_WORKSPACE/../..")
-          rm -rf "$GITHUB_WORK/wolfssl-examples-publish" || true
-
-          # Clean up any temporary files in workspace
-          find "$GITHUB_WORKSPACE" -name "*.o" -delete 2>/dev/null || true
-          find "$GITHUB_WORKSPACE" -name "*.a" -delete 2>/dev/null || true
-
-          echo ""
-          echo "Disk usage after cleanup:"
-          df -h

.github/workflows/async.yml

@@ -18,13 +18,12 @@ jobs:
       matrix:
         config: [
           # Add new configs here
-          '--enable-asynccrypt --enable-all --enable-dtls13 CFLAGS="-pedantic -Wdeclaration-after-statement -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE -DWOLFCRYPT_TEST_LINT"',
+          '--enable-asynccrypt --enable-all --enable-dtls13',
-          '--enable-asynccrypt-sw --enable-ocspstapling --enable-ocspstapling2 CFLAGS="-pedantic -Wdeclaration-after-statement -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE"',
+          '--enable-asynccrypt-sw --enable-ocspstapling --enable-ocspstapling2',
-          '--enable-ocsp CFLAGS="-DTEST_NONBLOCK_CERTS -pedantic -Wdeclaration-after-statement -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE"',
+          '--enable-ocsp CFLAGS="-DTEST_NONBLOCK_CERTS"',
         ]
     name: make check
-    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
-    runs-on: ubuntu-24.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 6
     steps:
@@ -33,7 +32,7 @@ jobs:
 
       - name: Test wolfSSL async
         run: |
-          ./autogen.sh
+          ./async-check.sh install
           ./configure ${{ matrix.config }}
           make check
 

.github/workflows/bind.yml

@@ -1,93 +0,0 @@
-name: bind9 Tests
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  build_wolfssl:
-    name: Build wolfSSL
-    if: github.repository_owner == 'wolfssl'
-    # Just to keep it the same as the testing target
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 4
-    steps:
-      - name: Build wolfSSL
-        uses: wolfSSL/actions-build-autotools-project@v1
-        with:
-          path: wolfssl
-          configure: --enable-all
-          install: true
-          check: false
-
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
-      - name: Upload built lib
-        uses: actions/upload-artifact@v4
-        with:
-          name: wolf-install-bind
-          path: build-dir.tgz
-          retention-days: 5
-
-  bind_check:
-    strategy:
-      fail-fast: false
-      matrix:
-        # List of releases to test
-        ref: [ 9.18.0, 9.18.28, 9.18.33 ]
-    name: ${{ matrix.ref }}
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 10
-    needs: build_wolfssl
-    steps:
-      - name: Download lib
-        uses: actions/download-artifact@v4
-        with:
-          name: wolf-install-bind
-
-      - name: untar build-dir
-        run: tar -xf build-dir.tgz
-
-      - name: Install dependencies
-        run: |
-          # Don't prompt for anything
-          export DEBIAN_FRONTEND=noninteractive
-          sudo apt-get update
-          # hostap dependencies
-          sudo apt-get install -y libuv1-dev libnghttp2-dev libcap-dev libcmocka-dev
-
-      - name: Checkout OSP
-        uses: actions/checkout@v4
-        with:
-          repository: wolfssl/osp
-          path: osp
-
-      - name: Checkout bind9
-        uses: actions/checkout@v4
-        with:
-          repository: isc-projects/bind9
-          path: bind
-          ref: v${{ matrix.ref }}
-
-      - name: Build and test bind9
-        working-directory: bind
-        run: |
-          export PKG_CONFIG_PATH=$GITHUB_WORKSPACE/build-dir/lib/pkgconfig
-          patch -p1 < $GITHUB_WORKSPACE/osp/bind9/${{ matrix.ref }}.patch
-          autoreconf -ivf
-          ./configure --with-wolfssl
-          sed -i 's/SUBDIRS = system//g' bin/tests/Makefile # remove failing tests
-          make -j V=1
-          make -j V=1 check

.github/workflows/cmake.yml

@@ -1,126 +0,0 @@
-name: WolfSSL CMake Build Tests
-
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-jobs:
-  build:
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-latest
-
-    steps:
-# pull wolfSSL
-    - uses: actions/checkout@master
-
-# install cmake
-    - name: Install cmake
-      run: |
-        sudo apt-get update
-        sudo apt-get install -y cmake
-
-# pull wolfssl
-    - name: Checkout wolfssl
-      uses: actions/checkout@master
-      with:
-        repository: wolfssl/wolfssl
-        path: wolfssl
-
-# build wolfssl
-    - name: Build wolfssl
-      working-directory: ./wolfssl
-      run: |
-        mkdir build
-        cd build
-        cmake -DCMAKE_VERBOSE_MAKEFILE:BOOL=ON -DWOLFSSL_INSTALL=yes -DCMAKE_INSTALL_PREFIX="$GITHUB_WORKSPACE/install" \
-            -DWOLFSSL_16BIT:BOOL=no -DWOLFSSL_32BIT:BOOL=no -DWOLFSSL_AES:BOOL=yes \
-            -DWOLFSSL_AESCBC:BOOL=yes -DWOLFSSL_AESCCM:BOOL=yes -DWOLFSSL_AESCFB:BOOL=yes \
-            -DWOLFSSL_AESCTR:BOOL=yes -DWOLFSSL_AESGCM:STRING=yes -DWOLFSSL_AESKEYWRAP:BOOL=yes \
-            -DWOLFSSL_AESOFB:BOOL=yes -DWOLFSSL_AESSIV:BOOL=yes -DWOLFSSL_ALIGN_DATA:BOOL=yes \
-            -DWOLFSSL_ALPN:BOOL=ON -DWOLFSSL_ALT_CERT_CHAINS:BOOL=ON -DWOLFSSL_ARC4:BOOL=yes \
-            -DWOLFSSL_ARIA:BOOL=no -DWOLFSSL_ASIO:BOOL=no -DWOLFSSL_ASM:BOOL=yes -DWOLFSSL_ASN:BOOL=yes \
-            -DWOLFSSL_ASYNC_THREADS:BOOL=no -DWOLFSSL_BASE64_ENCODE:BOOL=yes -DWOLFSSL_CAAM:BOOL=no \
-            -DWOLFSSL_CERTEXT:BOOL=yes -DWOLFSSL_CERTGEN:BOOL=yes -DWOLFSSL_CERTGENCACHE:BOOL=no \
-            -DWOLFSSL_CERTREQ:BOOL=yes -DWOLFSSL_CHACHA:STRING=yes -DWOLFSSL_CMAC:BOOL=yes \
-            -DWOLFSSL_CODING:BOOL=yes -DWOLFSSL_CONFIG_H:BOOL=yes -DWOLFSSL_CRL:STRING=yes \
-            -DWOLFSSL_CRYPTOCB:BOOL=yes -DWOLFSSL_CRYPTOCB_NO_SW_TEST:BOOL=no \
-            -DWOLFSSL_CRYPT_TESTS:BOOL=yes -DWOLFSSL_CRYPT_TESTS_HELP:BOOL=no \
-            -DWOLFSSL_CRYPT_TESTS_LIBS:BOOL=no -DWOLFSSL_CURL:BOOL=yes -DWOLFSSL_CURVE25519:STRING=yes \
-            -DWOLFSSL_CURVE448:STRING=yes -DWOLFSSL_DEBUG:BOOL=yes -DWOLFSSL_DES3:BOOL=ON \
-            -DWOLFSSL_DES3_TLS_SUITES:BOOL=no -DWOLFSSL_DH:STRING=yes -DWOLFSSL_DH_DEFAULT_PARAMS:BOOL=yes \
-            -DWOLFSSL_DSA:BOOL=yes -DWOLFSSL_DTLS:BOOL=ON -DWOLFSSL_DTLS13:BOOL=yes \
-            -DWOLFSSL_DTLS_CID:BOOL=yes -DWOLFSSL_ECC:STRING=yes \
-            -DWOLFSSL_ECCCUSTCURVES:STRING=all -DWOLFSSL_ECCSHAMIR:BOOL=yes \
-            -DWOLFSSL_ECH:BOOL=yes -DWOLFSSL_ED25519:BOOL=yes -DWOLFSSL_ED448:STRING=yes \
-            -DWOLFSSL_ENCKEYS:BOOL=yes -DWOLFSSL_ENC_THEN_MAC:BOOL=yes -DWOLFSSL_ERROR_QUEUE:BOOL=yes \
-            -DWOLFSSL_ERROR_STRINGS:BOOL=yes -DWOLFSSL_EXAMPLES:BOOL=yes -DWOLFSSL_EXPERIMENTAL:BOOL=yes \
-            -DWOLFSSL_EXTENDED_MASTER:BOOL=yes -DWOLFSSL_EX_DATA:BOOL=yes -DWOLFSSL_FAST_MATH:BOOL=no \
-            -DWOLFSSL_FILESYSTEM:BOOL=yes -DWOLFSSL_HARDEN:BOOL=yes -DWOLFSSL_HASH_DRBG:BOOL=yes \
-            -DWOLFSSL_HKDF:BOOL=yes -DWOLFSSL_HPKE:BOOL=yes -DWOLFSSL_HRR_COOKIE:STRING=yes \
-            -DWOLFSSL_INLINE:BOOL=yes -DWOLFSSL_INSTALL:BOOL=yes -DWOLFSSL_IP_ALT_NAME:BOOL=ON \
-            -DWOLFSSL_KEYGEN:BOOL=yes -DWOLFSSL_KEYING_MATERIAL:BOOL=ON \
-            -DWOLFSSL_MD4:BOOL=ON -DWOLFSSL_MD5:BOOL=yes -DWOLFSSL_MEMORY:BOOL=yes -DWOLFSSL_NO_STUB:BOOL=no \
-            -DWOLFSSL_OAEP:BOOL=yes -DWOLFSSL_OCSP:BOOL=yes -DWOLFSSL_OCSPSTAPLING:BOOL=ON \
-            -DWOLFSSL_OCSPSTAPLING_V2:BOOL=ON -DWOLFSSL_OLD_NAMES:BOOL=yes -DWOLFSSL_OLD_TLS:BOOL=yes \
-            -DWOLFSSL_OPENSSLALL:BOOL=yes -DWOLFSSL_OPENSSLEXTRA:BOOL=ON -DWOLFSSL_OPTFLAGS:BOOL=yes \
-            -DWOLFSSL_OQS:BOOL=no -DWOLFSSL_PKCALLBACKS:BOOL=yes -DWOLFSSL_PKCS12:BOOL=yes \
-            -DWOLFSSL_PKCS7:BOOL=yes -DWOLFSSL_POLY1305:BOOL=yes -DWOLFSSL_POSTAUTH:BOOL=yes \
-            -DWOLFSSL_PWDBASED:BOOL=yes -DWOLFSSL_QUIC:BOOL=yes -DWOLFSSL_REPRODUCIBLE_BUILD:BOOL=no \
-            -DWOLFSSL_RNG:BOOL=yes -DWOLFSSL_RSA:BOOL=yes -DWOLFSSL_RSA_PSS:BOOL=yes \
-            -DWOLFSSL_SESSION_TICKET:BOOL=ON -DWOLFSSL_SHA:BOOL=yes -DWOLFSSL_SHA224:BOOL=yes \
-            -DWOLFSSL_SHA3:STRING=yes -DWOLFSSL_SHA384:BOOL=yes -DWOLFSSL_SHA512:BOOL=yes \
-            -DWOLFSSL_SHAKE128:STRING=yes -DWOLFSSL_SHAKE256:STRING=yes -DWOLFSSL_SINGLE_THREADED:BOOL=no \
-            -DWOLFSSL_SNI:BOOL=yes -DWOLFSSL_SP_MATH_ALL:BOOL=yes -DWOLFSSL_SRTP:BOOL=yes \
-            -DWOLFSSL_STUNNEL:BOOL=yes -DWOLFSSL_SUPPORTED_CURVES:BOOL=yes -DWOLFSSL_SYS_CA_CERTS:BOOL=yes \
-            -DWOLFSSL_TICKET_NONCE_MALLOC:BOOL=yes -DWOLFSSL_TLS13:BOOL=yes -DWOLFSSL_TLSV12:BOOL=yes \
-            -DWOLFSSL_TLSX:BOOL=yes -DWOLFSSL_TPM:BOOL=yes -DWOLFSSL_CLU:BOOL=yes -DWOLFSSL_USER_SETTINGS:BOOL=no \
-            -DWOLFSSL_USER_SETTINGS_ASM:BOOL=no -DWOLFSSL_WOLFSSH:BOOL=ON -DWOLFSSL_X86_64_BUILD_ASM:BOOL=yes \
-            -DWOLFSSL_MLKEM=1 -DWOLFSSL_LMS=1 -DWOLFSSL_LMSSHA256192=1 -DWOLFSSL_EXPERIMENTAL=1 \
-            -DWOLFSSL_X963KDF:BOOL=yes -DWOLFSSL_DILITHIUM:BOOL=yes -DWOLFSSL_PKCS11:BOOL=yes \
-            -DWOLFSSL_ECCSI:BOOL=yes -DWOLFSSL_SAKKE:BOOL=yes -DWOLFSSL_SIPHASH:BOOL=yes \
-            -DCMAKE_C_FLAGS="-DWOLFSSL_DTLS_CH_FRAG" \
-            ..
-        cmake --build .
-        ctest -j $(nproc)
-        cmake --install .
-
-        # clean up
-        cd ..
-        rm -rf build
-
-# build "lean-tls" wolfssl
-    - name: Build wolfssl with lean-tls
-      working-directory: ./wolfssl
-      run: |
-        mkdir build
-        cd build
-        cmake -DCMAKE_VERBOSE_MAKEFILE:BOOL=ON -DWOLFSSL_INSTALL=yes -DCMAKE_INSTALL_PREFIX="$GITHUB_WORKSPACE/install" \
-            -DWOLFSSL_LEAN_TLS:BOOL=yes \
-            ..
-        cmake --build .
-        cmake --install .
-
-        # clean up
-        cd ..
-        rm -rf build
-
-# CMake build with user_settings.h
-    - name: Build wolfssl with user_settings.h
-      working-directory: ./wolfssl
-      run: |
-        mkdir build
-        cp examples/configs/user_settings_all.h ./build/user_settings.h
-        cd build
-        cmake -DCMAKE_VERBOSE_MAKEFILE:BOOL=ON -DWOLFSSL_INSTALL=yes -DCMAKE_INSTALL_PREFIX="$GITHUB_WORKSPACE/install" \
-            -DWOLFSSL_USER_SETTINGS=ON -DWOLFSSL_USER_SETTINGS_ASM=ON -DWOLFSSL_EXAMPLES=ON -DWOLFSSL_CRYPT_TESTS=ON \
-            -DCMAKE_C_FLAGS="${CMAKE_C_FLAGS} -I ." \
-            ..
-        cmake --build .
-        ctest -j $(nproc)
-        cmake --install .
-
-        # clean up
-        cd ..
-        rm -rf build

.github/workflows/codespell.yml

@@ -1,30 +0,0 @@
-name: Codespell test
-
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  codespell:
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    steps:
-    - uses: actions/checkout@v4
-
-    - uses: codespell-project/actions-codespell@v2.1
-      with:
-        check_filenames: true
-        check_hidden: true
-          # Add comma separated list of words that occur multiple times that should be ignored (sorted alphabetically, case sensitive)
-        ignore_words_list: adin,aNULL,brunch,carryIn,chainG,ciph,cLen,cliKs,dout,haveA,inCreated,inOut,inout,larg,LEAPYEAR,Merget,optionA,parm,parms,repid,rIn,userA,ser,siz,te,Te,HSI,failT,
-          # The exclude_file contains lines of code that should be ignored. This is useful for individual lines which have non-words that can safely be ignored.
-        exclude_file: '.codespellexcludelines'
-          # To skip files entirely from being processed, add it to the following list:
-        skip: '*.cproject,*.der,*.mtpj,*.pem,*.vcxproj,.git,*.launch,*.scfg,*.revoked,./examples/asn1/dumpasn1.cfg,./examples/asn1/oid_names.h'

.github/workflows/coverity-scan-fixes.yml

@@ -1,53 +0,0 @@
-name: Coverity Scan master branch
-
-on:
-  workflow_dispatch:
-  schedule:
-    - cron: '0 0 * * 1-5'
-    - cron: '0 0 * * 0'
-    - cron: '0 12 * * 0'
-
-jobs:
-  coverity:
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        ref: master
-
-    - name: Configure wolfSSL with enable-all M-F
-      if: github.event.schedule == '0 0 * * 1-5'
-      run: |
-        ./autogen.sh
-        ./configure --enable-all
-
-    - name: Configure wolfSSL with enable-all enable-smallstack Sun at 00:00
-      if: github.event.schedule == '0 0 * * 0'
-      run: |
-        ./autogen.sh
-        ./configure --enable-all --enable-smallstack
-
-    - name: Configure wolfSSL with bigendian Sun at 12:00
-      if: github.event.schedule == '0 12 * * 0'
-      run: |
-        ./autogen.sh
-        ./configure --enable-all CFLAGS="-DBIG_ENDIAN_ORDER"
-
-    - name: Check secrets
-      env:
-        token_var: ${{ secrets.COVERITY_SCAN_TOKEN }}
-        email_var: ${{ secrets.COVERITY_SCAN_EMAIL }}
-      run: |
-        token_len=${#token_var}
-        echo "$token_len"
-        email_len=${#email_var}
-        echo "$email_len"
-
-    - uses: vapier/coverity-scan-action@v1
-      with:
-        build_language: 'cxx'
-        project: "wolfSSL/wolfssl"
-        token: ${{ secrets.COVERITY_SCAN_TOKEN }}
-        email: ${{ secrets.COVERITY_SCAN_EMAIL }}
-        command: "make"

.github/workflows/curl.yml

@@ -15,8 +15,7 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
-    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
-    runs-on: ubuntu-24.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     steps:
@@ -27,20 +26,16 @@ jobs:
           configure: --enable-curl
           install: true
 
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-curl
-          path: build-dir.tgz
+          path: build-dir
           retention-days: 5
 
   test_curl:
     name: ${{ matrix.curl_ref }}
-    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
-    runs-on: ubuntu-24.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 15
     needs: build_wolfssl
@@ -52,15 +47,14 @@ jobs:
     - name: Install test dependencies
       run: |
         sudo apt-get update
-        sudo apt-get install nghttp2 libpsl5 libpsl-dev python3-impacket apache2 apache2-dev
+        sudo apt-get install nghttp2 libpsl5 libpsl-dev
+        sudo pip install impacket
 
     - name: Download lib
       uses: actions/download-artifact@v4
       with:
         name: wolf-install-curl
-
+        path: build-dir
-    - name: untar build-dir
-      run: tar -xf build-dir.tgz
 
     - name: Build curl
       uses: wolfSSL/actions-build-autotools-project@v1
@@ -68,9 +62,9 @@ jobs:
         repository: curl/curl
         path: curl
         ref: ${{ matrix.curl_ref }}
-        configure: --with-wolfssl=$GITHUB_WORKSPACE/build-dir --with-test-httpd=yes
+        configure: --with-wolfssl=$GITHUB_WORKSPACE/build-dir
         check: false
 
     - name: Test curl
       working-directory: curl
-      run: make -j $(nproc) test-nonflaky
+      run: make -j test-ci

.github/workflows/cyrus-sasl.yml

@@ -1,105 +0,0 @@
-name: cyrus-sasl Tests
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  build_wolfssl:
-    name: Build wolfSSL
-    if: github.repository_owner == 'wolfssl'
-    # Just to keep it the same as the testing target
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 4
-    steps:
-      - name: Build wolfSSL
-        uses: wolfSSL/actions-build-autotools-project@v1
-        with:
-          path: wolfssl
-          configure: --enable-all
-          install: true
-          # Don't run tests as this config is tested in many other places
-          check: false
-
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
-      - name: Upload built lib
-        uses: actions/upload-artifact@v4
-        with:
-          name: wolf-install-sasl
-          path: build-dir.tgz
-          retention-days: 5
-
-  sasl_check:
-    strategy:
-      fail-fast: false
-      matrix:
-        # List of releases to test
-        ref: [ 2.1.28 ]
-    name: ${{ matrix.ref }}
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 4
-    needs: build_wolfssl
-    steps:
-      - name: Install dependencies
-        run: |
-          # Don't prompt for anything
-          export DEBIAN_FRONTEND=noninteractive
-          sudo apt-get update
-          sudo apt-get install krb5-kdc krb5-otp libkrb5-dev \
-            libsocket-wrapper libnss-wrapper krb5-admin-server libdb5.3-dev
-
-      - name: Download lib
-        uses: actions/download-artifact@v4
-        with:
-          name: wolf-install-sasl
-
-      - name: untar build-dir
-        run: tar -xf build-dir.tgz
-
-      - name: Checkout OSP
-        uses: actions/checkout@v4
-        with:
-          repository: wolfssl/osp
-          path: osp
-
-      - name: Checkout sasl
-        uses: actions/checkout@v4
-        with:
-          repository: cyrusimap/cyrus-sasl
-          ref: cyrus-sasl-${{ matrix.ref }}
-          path: sasl
-
-      - name: Build cyrus-sasl
-        working-directory: sasl
-        run: |
-          patch -p1 < $GITHUB_WORKSPACE/osp/cyrus-sasl/${{ matrix.ref }}/${{ matrix.ref }}.patch
-          autoreconf -ivf
-          ./configure --with-openssl=no --with-wolfssl=$GITHUB_WORKSPACE/build-dir --with-dblib=berkeley --disable-shared
-          # Need to run 'make' twice with '--disable-shared' for some reason
-          make -j || make -j
-
-      - name: Run testsuite
-        working-directory: sasl
-        run: |
-          make -j -C utils testsuite saslpasswd2
-          # Retry up to five times
-          for i in {1..5}; do
-             TEST_RES=0
-             $GITHUB_WORKSPACE/osp/cyrus-sasl/${{ matrix.ref }}/run-tests.sh || TEST_RES=$?
-             if [ "$TEST_RES" -eq "0" ]; then
-                break
-             fi
-          done

.github/workflows/disable-pk-algs.yml

@@ -1,63 +0,0 @@
-name: disable-pk-algs Tests
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  make_check:
-    strategy:
-      matrix:
-        config: [
-          # Add new configs here
-          '--disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-rsa --enable-dh',
-          '--disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-ecc',
-          '--disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-rsa --enable-curve25519',
-          '--disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-ecc --enable-curve25519',
-          '--disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-rsa --enable-curve448',
-          '--disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-ecc --enable-curve448',
-          '--disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-curve25519 --enable-ed25519',
-          '--disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-curve448 --enable-ed448',
-          '-enable-cryptonly  --disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-rsa',
-          '--enable-cryptonly  --disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-dh',
-          '--enable-cryptonly  --disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-ecc',
-          '--enable-cryptonly  --disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-curve25519',
-          '--enable-cryptonly  --disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-ed25519',
-          '--enable-cryptonly  --disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-curve448',
-          '--enable-cryptonly  --disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-ed448',
-        ]
-    name: make check
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 6
-    steps:
-      - uses: actions/checkout@v4
-        name: Checkout wolfSSL
-
-      - name: Test wolfSSL
-        run: |
-          ./autogen.sh
-          ./configure ${{ matrix.config }}
-          make -j 4
-          make check
-
-      - name: Print errors
-        if: ${{ failure() }}
-        run: |
-          for file in scripts/*.log
-          do
-              if [ -f "$file" ]; then
-                  echo "${file}:"
-                  cat "$file"
-                  echo "========================================================================"
-              fi
-          done

.github/workflows/disabled/haproxy.yml

@@ -20,7 +20,6 @@ jobs:
         # List of refs to test
         ref: [ master ]
     name: ${{ matrix.ref }}
-    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     steps:
       - name: Build wolfSSL
@@ -58,3 +57,4 @@ jobs:
       - name: Test HaProxy
         working-directory: haproxy
         run: make reg-tests reg-tests/ssl VTEST_PROGRAM=$GITHUB_WORKSPACE/VTest/vtest
+ 

.github/workflows/disabled/hostap.yml

@@ -22,7 +22,6 @@ jobs:
           - build_id: hostap-build2
             wolf_extra_config: --enable-brainpool --enable-wpas-dpp
     name: Build wolfSSL
-    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
     runs-on: ubuntu-20.04
     # This should be a safe limit for the tests to run.
@@ -100,7 +99,6 @@ jobs:
               build_id: hostap-build2
             }
     name: hwsim test
-    if: github.repository_owner == 'wolfssl'
     # For openssl 1.1
     runs-on: ubuntu-20.04
     # This should be a safe limit for the tests to run.

.github/workflows/docker-Espressif.yml

@@ -14,35 +14,30 @@ concurrency:
 jobs:
   espressif_latest:
     name: latest Docker container
-    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
-    runs-on: ubuntu-24.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 12
     container:
-      # The latest stable release is v5.5
+      image: espressif/idf:latest
-      image: espressif/idf:release-v5.5
-      # image: espressif/idf:latest # The "latest" has breaking changes for ESP-IDF V6
     steps:
       - uses: actions/checkout@v4
       - name: Initialize Espressif IDE and build examples
-        run: cd /opt/esp/idf && . ./export.sh && cd $GITHUB_WORKSPACE; IDE/Espressif/ESP-IDF/compileAllExamples.sh
+        run: . /opt/esp/idf/export.sh; IDE/Espressif/ESP-IDF/compileAllExamples.sh
   espressif_v4_4:
     name: v4.4 Docker container
-    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
-    runs-on: ubuntu-24.04
     container:
       image: espressif/idf:release-v4.4
     steps:
       - uses: actions/checkout@v4
       - name: Initialize Espressif IDE and build examples
-        run: cd /opt/esp/idf && . ./export.sh && cd $GITHUB_WORKSPACE; IDE/Espressif/ESP-IDF/compileAllExamples.sh
+        run: . /opt/esp/idf/export.sh; IDE/Espressif/ESP-IDF/compileAllExamples.sh
   espressif_v5_0:
     name: v5.0 Docker container
-    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
-    runs-on: ubuntu-24.04
     container:
       image: espressif/idf:release-v5.0
     steps:
       - uses: actions/checkout@v4
       - name: Initialize Espressif IDE and build examples
-        run: cd /opt/esp/idf && . ./export.sh && cd $GITHUB_WORKSPACE; IDE/Espressif/ESP-IDF/compileAllExamples.sh
+        run: . /opt/esp/idf/export.sh; IDE/Espressif/ESP-IDF/compileAllExamples.sh

.github/workflows/docker-OpenWrt.yml

@@ -17,8 +17,7 @@ concurrency:
 jobs:
     build_library:
         name: Compile libwolfssl.so
-        if: github.repository_owner == 'wolfssl'
+        runs-on: ubuntu-latest
-        runs-on: ubuntu-24.04
         # This should be a safe limit for the tests to run.
         timeout-minutes: 4
         container:
@@ -29,20 +28,15 @@ jobs:
             - uses: actions/checkout@v4
             - name: Compile libwolfssl.so
               run: ./autogen.sh && ./configure --enable-all && make
-              # 2024-08-05 - Something broke in the actions. They are no longer following links.
-            - name: tar libwolfssl.so
-              working-directory: src/.libs
-              run: tar -zcf libwolfssl.tgz libwolfssl.so*
             - name: Upload libwolfssl.so
               uses: actions/upload-artifact@v4
               with:
                 name: openwrt-libwolfssl.so
-                path: src/.libs/libwolfssl.tgz
+                path: src/.libs/libwolfssl.so
                 retention-days: 5
     compile_container:
         name: Compile container
-        if: github.repository_owner == 'wolfssl'
+        runs-on: ubuntu-latest
-        runs-on: ubuntu-24.04
         # This should be a safe limit for the tests to run.
         timeout-minutes: 2
         needs: build_library
@@ -56,9 +50,7 @@ jobs:
             - uses: actions/download-artifact@v4
               with:
                 name: openwrt-libwolfssl.so
-                path: .
+                path: Docker/OpenWrt/.
-            - name: untar libwolfssl.so
-              run: tar -xf libwolfssl.tgz -C Docker/OpenWrt
             - name: Build but dont push
               uses: docker/build-push-action@v5
               with:

.github/workflows/fil-c.yml

@@ -1,47 +0,0 @@
-name: Fil-C Tests
-
-env:
-  FIL_C_VERSION: v0.674
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  run_fil_c:
-    strategy:
-      fail-fast: false
-      matrix:
-        config: [
-          # Add new configs here. Don't use CPPFLAGS.
-          '',
-          '--enable-all',
-        ]
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 30
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    name: ${{ matrix.config }}
-    steps:
-    - name: Download fil-c release
-      run: gh release download ${{ env.FIL_C_VERSION }} --repo pizlonator/fil-c --pattern 'filc-*'
-      env:
-        GH_TOKEN: ${{ github.token }}
-
-    - name: Extract fil-c tarball
-      run: mkdir -p filc && tar -xf filc-*.tar* --strip-components=1 -C filc
-
-    - name: Build and test wolfSSL
-      uses: wolfSSL/actions-build-autotools-project@v1
-      with:
-        path: wolfssl
-        configure: ${{ matrix.config }} CC=$GITHUB_WORKSPACE/filc/build/bin/filcc --disable-asm CPPFLAGS=-DWC_NO_CACHE_RESISTANT
-        check: true

.github/workflows/gencertbuf.yml

@@ -1,41 +0,0 @@
-name: Test gencertbuf script
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  gencertbuf:
-    name: gencertbuf
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-latest
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 6
-    steps:
-      - uses: actions/checkout@v4
-        name: Checkout wolfSSL
-
-      - name: Test generate wolfssl/certs_test.h
-        run: ./gencertbuf.pl
-
-      - name: Test wolfSSL
-        run: |
-          ./autogen.sh
-          ./configure --enable-all --enable-experimental --enable-dilithium --enable-kyber
-          make
-          ./wolfcrypt/test/testwolfcrypt
-
-      - name: Print errors
-        if: ${{ failure() }}
-        run: |
-          if [ -f test-suite.log ] ; then
-            cat test-suite.log
-          fi

.github/workflows/grpc.yml

@@ -15,9 +15,8 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
-    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
-    runs-on: ubuntu-24.04
+    runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 10
     steps:
@@ -28,14 +27,11 @@ jobs:
           configure: --enable-all 'CPPFLAGS=-DWOLFSSL_RSA_KEY_CHECK -DHAVE_EX_DATA_CLEANUP_HOOKS'
           install: true
 
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-grpc
-          path: build-dir.tgz
+          path: build-dir
           retention-days: 5
 
   grpc_check:
@@ -51,8 +47,7 @@ jobs:
               test_core_security_ssl_credentials_test test_cpp_end2end_ssl_credentials_test
               h2_ssl_cert_test h2_ssl_session_reuse_test
     name: ${{ matrix.ref }}
-    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
-    runs-on: ubuntu-24.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 30
     needs: build_wolfssl
@@ -70,14 +65,7 @@ jobs:
         uses: actions/download-artifact@v4
         with:
           name: wolf-install-grpc
-
+          path: build-dir
-      - name: Setup cmake version
-        uses: jwlawson/actions-setup-cmake@v2
-        with:
-          cmake-version: '3.25.x'
-
-      - name: untar build-dir
-        run: tar -xf build-dir.tgz
 
       - name: Checkout OSP
         uses: actions/checkout@v4
@@ -99,7 +87,7 @@ jobs:
           git submodule update --init
           mkdir cmake/build
           cd cmake/build
-          cmake -DCMAKE_POLICY_VERSION_MINIMUM=3.1 -DgRPC_BUILD_TESTS=ON -DgRPC_SSL_PROVIDER=wolfssl \
+          cmake -DgRPC_BUILD_TESTS=ON -DgRPC_SSL_PROVIDER=wolfssl \
             -DWOLFSSL_INSTALL_DIR=$GITHUB_WORKSPACE/build-dir ../..
           make -j $(nproc) ${{ matrix.tests }}
 

.github/workflows/haproxy.yml

@@ -1,98 +0,0 @@
-name: haproxy Test
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  build_wolfssl:
-    name: Build wolfSSL
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 4
-    steps:
-      - name: Build wolfSSL
-        uses: wolfSSL/actions-build-autotools-project@v1
-        with:
-          path: wolfssl
-          configure: --enable-haproxy
-          install: true
-
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
-      - name: Upload built lib
-        uses: actions/upload-artifact@v4
-        with:
-          name: wolf-install-haproxy
-          path: build-dir.tgz
-          retention-days: 5
-
-  test_haproxy:
-    name: ${{ matrix.haproxy_ref }}
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 15
-    needs: build_wolfssl
-    strategy:
-      fail-fast: false
-      matrix:
-        haproxy_ref: [ 'v3.1.0', 'v3.2.0']
-    steps:
-    - name: Install test dependencies
-      run: |
-        sudo apt-get update
-        sudo apt-get install libpcre2-dev
-
-    - name: Download lib
-      uses: actions/download-artifact@v4
-      with:
-        name: wolf-install-haproxy
-
-    - name: untar build-dir
-      run: tar -xf build-dir.tgz
-
-    # check cache for haproxy if not there then download it
-    - name: Check haproxy cache
-      uses: actions/cache@v4
-      id: cache-haproxy
-      with:
-        path: build-dir/haproxy-${{matrix.haproxy_ref}}
-        key: haproxy-${{matrix.haproxy_ref}}
-
-    - name: Download haproxy if needed
-      if: steps.cache-haproxy.outputs.cache-hit != 'true'
-      uses: actions/checkout@v3
-      with:
-        repository: haproxy/haproxy
-        ref: ${{matrix.haproxy_ref}}
-        path: build-dir/haproxy-${{matrix.haproxy_ref}}
-
-    - name: Build haproxy
-      working-directory: build-dir/haproxy-${{matrix.haproxy_ref}}
-      run: make clean && make TARGET=linux-glibc USE_OPENSSL_WOLFSSL=1 SSL_LIB=$GITHUB_WORKSPACE/build-dir/lib SSL_INC=$GITHUB_WORKSPACE/build-dir/include ADDLIB=-Wl,-rpath,$GITHUB_WORKSPACE/build-dir/lib CFLAGS="-fsanitize=address" LDFLAGS="-fsanitize=address"
-
-      # wlallemand/VTest used in v3.1.0 is no longer available
-    - name: Patch build-vtest.sh for v3.1.0
-      if: matrix.haproxy_ref == 'v3.1.0'
-      working-directory: build-dir/haproxy-${{ matrix.haproxy_ref }}/scripts
-      run: |
-        sed -i 's|https://github.com/wlallemand/VTest/archive/refs/heads/haproxy-sd_notify.tar.gz|https://github.com/vtest/VTest2/archive/main.tar.gz|' build-vtest.sh
-
-    - name: Build haproxy vtest
-      working-directory: build-dir/haproxy-${{matrix.haproxy_ref}}
-      run: ./scripts/build-vtest.sh
-
-    - name: Test haproxy
-      working-directory: build-dir/haproxy-${{matrix.haproxy_ref}}
-      run: VTEST_PROGRAM=$GITHUB_WORKSPACE/build-dir/vtest/vtest make reg-tests -- --debug reg-tests/ssl/*

.github/workflows/hitch.yml

@@ -15,7 +15,6 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
-    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
@@ -28,14 +27,11 @@ jobs:
           configure: --enable-hitch
           install: true
 
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-hitch
-          path: build-dir.tgz
+          path: build-dir
           retention-days: 5
 
   hitch_check:
@@ -48,7 +44,6 @@ jobs:
             ignore-tests: >-
               test13-r82.sh test15-proxy-v2-npn.sh test39-client-cert-proxy.sh
     name: ${{ matrix.ref }}
-    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
@@ -58,9 +53,7 @@ jobs:
         uses: actions/download-artifact@v4
         with:
           name: wolf-install-hitch
-
+          path: build-dir
-      - name: untar build-dir
-        run: tar -xf build-dir.tgz
 
       - name: Checkout OSP
         uses: actions/checkout@v4

.github/workflows/hostap-vm.yml

@@ -2,14 +2,10 @@ name: hostap and wpa-supplicant Tests
 
 # START OF COMMON SECTION
 on:
-    workflow_dispatch: # Allows people to run it manually if they want but
+  push:
-                       # disables it from running automatically when broken
+    branches: [ 'master', 'main', 'release/**' ]
-# To restore this to an auto test delete the above workflow_dispatch line and
+  pull_request:
-# comments and uncomment the below lines for push and pull_request
+    branches: [ '*' ]
-#  push:
-#    branches: [ 'master', 'main', 'release/**' ]
-#  pull_request:
-#    branches: [ '*' ]
 
 concurrency:
   group: ${{ github.workflow }}-${{ github.ref }}
@@ -17,7 +13,7 @@ concurrency:
 # END OF COMMON SECTION
 
 env:
-  LINUX_REF: v6.12
+  LINUX_REF: v6.6
 
 jobs:
   build_wolfssl:
@@ -31,8 +27,7 @@ jobs:
               --enable-wpas-dpp --enable-brainpool --with-eccminsz=192 
               --enable-tlsv10 --enable-oldtls
     name: Build wolfSSL
-    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
-    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 10
     steps:
@@ -57,58 +52,33 @@ jobs:
             ${{ env.wolf_debug_flags }} ${{ matrix.wolf_extra_config }}
           install: true
 
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: ${{ matrix.build_id }}
-          path: build-dir.tgz
+          path: build-dir
           retention-days: 5
 
-  checkout_hostap:
-    name: Checkout hostap repo
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-22.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 10
-    steps:
-      - name: Checking if we have hostap in cache
-        uses: actions/cache@v4
-        id: cache
-        with:
-          path: hostap
-          key: hostap-repo
-          lookup-only: true
-
-      - name: Checkout hostap
-        if: steps.cache.outputs.cache-hit != 'true'
-        run: git clone https://w1.fi/hostap.git hostap
-
   build_uml_linux:
     name: Build UML (UserMode Linux)
-    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
-    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 10
-    needs: checkout_hostap
     steps:
       - name: Checking if we have kernel in cache
         uses: actions/cache@v4
         id: cache
         with:
           path: linux/linux
-          key: hostap-linux-${{ env.LINUX_REF }}
+          key: ${{ env.LINUX_REF }}
           lookup-only: true
 
-      - name: Checking if we have hostap in cache
+      - name: Checkout hostap
         if: steps.cache.outputs.cache-hit != 'true'
-        uses: actions/cache/restore@v4
+        uses: actions/checkout@v4
         with:
+          repository: julek-wolfssl/hostap-mirror
           path: hostap
-          key: hostap-repo
-          fail-on-cache-miss: true
 
       - name: Checkout linux
         if: steps.cache.outputs.cache-hit != 'true'
@@ -116,7 +86,6 @@ jobs:
         with:
           repository: torvalds/linux 
           path: linux
-          ref: ${{ env.LINUX_REF }}
 
       - name: Compile linux
         if: steps.cache.outputs.cache-hit != 'true'
@@ -167,20 +136,23 @@ jobs:
               build_id: hostap-vm-build2
             }
     name: hwsim test
-    if: github.repository_owner == 'wolfssl'
+    # For openssl 1.1
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 45
-    needs: [build_wolfssl, build_uml_linux, checkout_hostap]
+    needs: [build_wolfssl, build_uml_linux]
     steps:
       - name: Checking if we have kernel in cache
         uses: actions/cache/restore@v4
         id: cache
         with:
           path: linux/linux
-          key: hostap-linux-${{ env.LINUX_REF }}
+          key: ${{ env.LINUX_REF }}
           fail-on-cache-miss: true
 
+      - name: show file structure
+        run: tree
+
         # No way to view the full strategy in the browser (really weird)
       - name: Print strategy
         run: |
@@ -206,9 +178,7 @@ jobs:
         uses: actions/download-artifact@v4
         with:
           name: ${{ matrix.config.build_id }}
-
+          path: build-dir
-      - name: untar build-dir
-        run: tar -xf build-dir.tgz
 
       - name: Install dependencies
         run: |
@@ -218,29 +188,19 @@ jobs:
           # hostap dependencies
           sudo apt-get install -y libpcap0.8 libpcap-dev curl libcurl4-openssl-dev \
             libnl-3-dev binutils-dev libssl-dev libiberty-dev libnl-genl-3-dev \
-            libnl-route-3-dev libdbus-1-dev bridge-utils tshark python3-pycryptodome
+            libnl-route-3-dev libdbus-1-dev bridge-utils tshark
-          sudo pip install pycryptodome
+          sudo pip3 install pycryptodome
 
-      - name: Checking if we have hostap in cache
+      - name: Checkout hostap
-        uses: actions/cache/restore@v4
+        uses: actions/checkout@v4
         with:
+          repository: julek-wolfssl/hostap-mirror 
           path: hostap
-          key: hostap-repo
+          ref: ${{ matrix.config.hostap_ref }}
-          fail-on-cache-miss: true
-
-      - name: Checkout correct ref
-        working-directory: hostap
-        run: git checkout ${{ matrix.config.hostap_ref }}
 
       - name: Update certs
         working-directory: hostap/tests/hwsim/auth_serv
-        run: |
+        run: ./update.sh
-          ./update.sh
-          ./sha512-generate.sh
-          # Force regeneration of rsa3072-ca.key to get rsa3072-generate.sh to
-          # correctly update all the certs
-          rm rsa3072-ca.key
-          ./rsa3072-generate.sh
 
       - if: ${{ matrix.config.osp_ref }}
         name: Checkout OSP
@@ -321,7 +281,6 @@ jobs:
             KERNELDIR=$GITHUB_WORKSPACE/linux
             KVMARGS="-cpu host"
           EOF
-          git config --global --add safe.directory $GITHUB_WORKSPACE/hostap
           # Run tests in increments of 200 to not stall out the parallel-vm script
           while mapfile -t -n 200 ary && ((${#ary[@]})); do
             TESTS=$(printf '%s\n' "${ary[@]}" | tr '\n' ' ')
@@ -336,10 +295,6 @@ jobs:
             rm -r /tmp/hwsim-test-logs
           done < $GITHUB_WORKSPACE/wolfssl/.github/workflows/hostap-files/configs/${{ matrix.config.hostap_ref }}/tests
 
-      - name: show errors
-        if: ${{ failure() && steps.testing.outcome == 'failure' }}
-        run: grep -riP 'fail|error' /tmp/hwsim-test-logs/latest
-
       # The logs are quite big. It hasn't been useful so far so let's not waste
       # precious gh space.
       #- name: zip logs

.github/workflows/intelasm-c-fallback.yml

@@ -1,52 +0,0 @@
-name: Dynamic C Fallback Tests
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  make_check:
-    strategy:
-      matrix:
-        config: [
-          # Add new configs here
-          '--enable-intelasm --enable-sp-asm --enable-all --enable-testcert --enable-acert --enable-dtls13 --enable-dtls-mtu --enable-dtls-frag-ch --enable-dtlscid --enable-quic --with-sys-crypto-policy CPPFLAGS="-DNO_WOLFSSL_CIPHER_SUITE_TEST -DWC_C_DYNAMIC_FALLBACK -DDEBUG_VECTOR_REGISTER_ACCESS -DDEBUG_VECTOR_REGISTER_ACCESS_FUZZING -DWC_DEBUG_CIPHER_LIFECYCLE"'
-        ]
-    name: make check
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 6
-    steps:
-      - uses: actions/checkout@v4
-        name: Checkout wolfSSL
-
-      - name: Test wolfSSL with WC_C_DYNAMIC_FALLBACK and DEBUG_VECTOR_REGISTER_ACCESS_FUZZING
-        run: |
-          ./autogen.sh
-          randseed=$(head -c 4 /dev/urandom | od -t u4 --address-radix=n)
-          randseed="${randseed#"${randseed%%[![:space:]]*}"}"
-          echo "fuzzing seed=${randseed}"
-          ./configure ${{ matrix.config }} CFLAGS="-DWC_DEBUG_VECTOR_REGISTERS_FUZZING_SEED=$randseed -fsanitize=leak -g -fno-omit-frame-pointer"
-          make -j 4
-          make check
-
-      - name: Print errors
-        if: ${{ failure() }}
-        run: |
-          for file in scripts/*.log
-          do
-              if [ -f "$file" ]; then
-                  echo "${file}:"
-                  cat "$file"
-                  echo "========================================================================"
-              fi
-          done

.github/workflows/ipmitool.yml

@@ -1,85 +0,0 @@
-name: ipmitool Tests
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-
-jobs:
-  build_wolfssl:
-    name: Build wolfSSL
-    if: github.repository_owner == 'wolfssl'
-    # Just to keep it the same as the testing target
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 4
-    steps:
-      - name: Build wolfSSL
-        uses: wolfSSL/actions-build-autotools-project@v1
-        with:
-          path: wolfssl
-          configure: --enable-all
-          install: true
-          # Don't run tests as this config is tested in many other places
-          check: false
-
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
-      - name: Upload built lib
-        uses: actions/upload-artifact@v4
-        with:
-          name: wolf-install-ipmitool
-          path: build-dir.tgz
-          retention-days: 5
-
-  build_ipmitool:
-    strategy:
-      fail-fast: false
-      matrix:
-        git_ref: [ c3939dac2c060651361fc71516806f9ab8c38901 ]
-    name: ${{ matrix.git_ref }}
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    needs: build_wolfssl
-    steps:
-      - name: Install dependencies
-        run: export DEBIAN_FRONTEND=noninteractive && sudo apt-get update && sudo apt-get install -y libreadline-dev
-      - name: Download lib
-        uses: actions/download-artifact@v4
-        with:
-          name: wolf-install-ipmitool
-
-      - name: untar build-dir
-        run: tar -xf build-dir.tgz
-
-      - name: Checkout OSP
-        uses: actions/checkout@v4
-        with:
-          repository: wolfssl/osp
-          path: osp
-
-      - name: Build ipmitool
-        uses: wolfSSL/actions-build-autotools-project@v1
-        with:
-          repository: ipmitool/ipmitool
-          ref: ${{ matrix.git_ref }}
-          path: ipmitool
-          patch-file: $GITHUB_WORKSPACE/osp/ipmitool/*-${{ matrix.git_ref }}.patch
-          configure: --with-wolfssl=$GITHUB_WORKSPACE/build-dir
-          # No checks included and not running since it depends on hardware
-          check: false
-
-      - name: Confirm built with wolfSSL
-        working-directory: ipmitool
-        run: |
-          ldd src/ipmitool | grep wolfssl
-          ldd src/ipmievd | grep wolfssl

.github/workflows/jwt-cpp.yml

@@ -1,101 +0,0 @@
-name: jwt-cpp Tests
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  build_wolfssl:
-    name: Build wolfSSL
-    # Just to keep it the same as the testing target
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 4
-    steps:
-      - name: Build wolfSSL
-        uses: wolfSSL/actions-build-autotools-project@v1
-        with:
-          path: wolfssl
-          configure: --enable-all
-          install: true
-          # Don't run tests as this config is tested in many other places
-          check: false
-
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
-      - name: Upload built lib
-        uses: actions/upload-artifact@v4
-        with:
-          name: wolf-install-jwt-cpp
-          path: build-dir.tgz
-          retention-days: 5
-
-  build_pam-ipmi:
-    if: github.repository_owner == 'wolfssl'
-    strategy:
-      fail-fast: false
-      matrix:
-        config:
-          - ref: 0.7.0
-            runner: ubuntu-24.04
-          - ref: 0.6.0
-            runner: ubuntu-24.04
-    name: ${{ matrix.config.ref }}
-    runs-on: ${{ matrix.config.runner }}
-    needs: build_wolfssl
-    steps:
-      - name: Install dependencies
-        run: |
-          # Don't prompt for anything
-          export DEBIAN_FRONTEND=noninteractive
-          sudo apt-get update
-          sudo apt-get install libgtest-dev
-
-      - name: Download lib
-        uses: actions/download-artifact@v4
-        with:
-          name: wolf-install-jwt-cpp
-
-      - name: Setup cmake version
-        uses: jwlawson/actions-setup-cmake@v2
-        with:
-          cmake-version: '3.25.x'
-
-      - name: untar build-dir
-        run: tar -xf build-dir.tgz
-
-      - name: Checkout OSP
-        uses: actions/checkout@v4
-        with:
-          repository: wolfssl/osp
-          path: osp
-
-      - name: Checkout jwt-cpp
-        uses: actions/checkout@v4
-        with:
-          repository: Thalhammer/jwt-cpp
-          path: jwt-cpp
-          ref: v${{ matrix.config.ref }}
-
-      - name: Build pam-ipmi
-        working-directory: jwt-cpp
-        run: |
-          patch -p1 < ../osp/jwt-cpp/${{ matrix.config.ref }}.patch
-          PKG_CONFIG_PATH=$GITHUB_WORKSPACE/build-dir/lib/pkgconfig \
-            cmake -DCMAKE_POLICY_VERSION_MINIMUM=3.5 -B build -DJWT_SSL_LIBRARY:STRING=wolfSSL -DJWT_BUILD_TESTS=ON .
-          make -j -C build
-          ldd ./build/tests/jwt-cpp-test | grep wolfssl
-
-      - name: Run jwt-cpp tests
-        working-directory: jwt-cpp
-        run: ./build/tests/jwt-cpp-test

.github/workflows/krb5.yml

@@ -16,8 +16,7 @@ jobs:
   build_wolfssl:
     name: Build wolfSSL
     # Just to keep it the same as the testing target
-    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
-    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 5
     steps:
@@ -32,14 +31,11 @@ jobs:
           configure: --enable-krb CC='gcc -fsanitize=address'
           install: true
 
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-krb5
-          path: build-dir.tgz
+          path: build-dir
           retention-days: 5
 
   krb5_check:
@@ -49,8 +45,7 @@ jobs:
         # List of releases to test
         ref: [ 1.21.1 ]
     name: ${{ matrix.ref }}
-    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
-    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 8
     needs: build_wolfssl
@@ -59,9 +54,7 @@ jobs:
         uses: actions/download-artifact@v4
         with:
           name: wolf-install-krb5
-
+          path: build-dir
-      - name: untar build-dir
-        run: tar -xf build-dir.tgz
 
       - name: Checkout OSP
         uses: actions/checkout@v4
@@ -92,7 +85,7 @@ jobs:
           # Using rpath because LD_LIBRARY_PATH is overwritten during testing
           export WOLFSSL_CFLAGS="-I$GITHUB_WORKSPACE/build-dir/include -I$GITHUB_WORKSPACE/build-dir/include/wolfssl  -Wl,-rpath=$GITHUB_WORKSPACE/build-dir/lib"
           export WOLFSSL_LIBS="-lwolfssl -L$GITHUB_WORKSPACE/build-dir/lib -Wl,-rpath=$GITHUB_WORKSPACE/build-dir/lib"
-          ./configure --with-crypto-impl=wolfssl --with-tls-impl=wolfssl --disable-pkinit --with-spake-openssl \
+          ./configure --with-crypto-impl=wolfssl --with-tls-impl=wolfssl --disable-pkinit \
             CFLAGS='-fsanitize=address' LDFLAGS='-fsanitize=address'
           CFLAGS='-fsanitize=address' LDFLAGS='-fsanitize=address' make -j
 

.github/workflows/libspdm.yml

@@ -1,91 +0,0 @@
-name: libspdm Tests
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  build_wolfssl:
-    name: Build wolfSSL
-    if: github.repository_owner == 'wolfssl'
-    # Just to keep it the same as the testing target
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 4
-    steps:
-      - name: Build wolfSSL
-        uses: wolfSSL/actions-build-autotools-project@v1
-        with:
-          path: wolfssl
-          configure: --enable-all --enable-static CFLAGS='-DRSA_MIN_SIZE=512'
-          install: true
-
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
-      - name: Upload built lib
-        uses: actions/upload-artifact@v4
-        with:
-          name: wolf-install-libspdm
-          path: build-dir.tgz
-          retention-days: 5
-
-  libspdm_check:
-    strategy:
-      fail-fast: false
-      matrix:
-        # List of releases to test
-        ref: [ 3.7.0 ]
-    name: ${{ matrix.ref }}
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 4
-    needs: build_wolfssl
-    steps:
-      - name: Download lib
-        uses: actions/download-artifact@v4
-        with:
-          name: wolf-install-libspdm
-
-      - name: untar build-dir
-        run: tar -xf build-dir.tgz
-
-      - name: Checkout OSP
-        uses: actions/checkout@v4
-        with:
-          repository: wolfssl/osp
-          path: osp
-
-      - name: Checkout libspdm
-        uses: actions/checkout@v4
-        with:
-          repository: DMTF/libspdm
-          path: libspdm
-          ref: ${{ matrix.ref }}
-
-      - name: Build and test libspdm
-        working-directory: libspdm
-        run: |
-          patch -p1 < ../osp/libspdm/${{ matrix.ref }}/libspdm-${{ matrix.ref }}.patch
-          git submodule update --init --recursive
-          # Silence cmake version warnings
-          find -name CMakeLists.txt -exec sed -i 's/cmake_minimum_required.*/cmake_minimum_required(VERSION 3.10)/g' {} \;
-          mkdir build
-          cd build
-          cmake -DARCH=x64 -DTOOLCHAIN=GCC -DTARGET=Debug -DCRYPTO=wolfssl -DENABLE_BINARY_BUILD=1 \
-            -DCOMPILED_LIBWOLFSSL_PATH=$GITHUB_WORKSPACE/build-dir/lib/libwolfssl.a \
-            -DWOLFSSL_INCDIR=$GITHUB_WORKSPACE/build-dir/include ..
-          make -j
-          cd ../unit_test/sample_key
-          ../../build/bin/test_crypt
-          ../../build/bin/test_spdm_secured_message
-          ../../build/bin/test_spdm_crypt

.github/workflows/libssh2.yml

@@ -16,8 +16,7 @@ jobs:
   build_wolfssl:
     name: Build wolfSSL
     # Just to keep it the same as the testing target
-    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
-    runs-on: ubuntu-24.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     steps:
@@ -29,14 +28,11 @@ jobs:
           check: false # config is already tested in many other PRB's
           install: true
 
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-libssh2
-          path: build-dir.tgz
+          path: build-dir
           retention-days: 5
 
   libssh2_check:
@@ -44,10 +40,9 @@ jobs:
       fail-fast: false
       matrix:
         # List of releases to test
-        ref: [ 1.11.1 ]
+        ref: [ 1.11.0 ]
     name: ${{ matrix.ref }}
-    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
-    runs-on: ubuntu-24.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 8
     needs: build_wolfssl
@@ -56,35 +51,17 @@ jobs:
         uses: actions/download-artifact@v4
         with:
           name: wolf-install-libssh2
+          path: build-dir
 
-      - name: untar build-dir
+      - name: Build and test libssh2
-        run: tar -xf build-dir.tgz
+        uses: wolfSSL/actions-build-autotools-project@v1
-
-      - name: Clone libssh2
-        uses: actions/checkout@v4
         with:
           repository: libssh2/libssh2
           ref: libssh2-${{ matrix.ref }}
           path: libssh2
-
+          configure: --with-crypto=wolfssl --with-libwolfssl-prefix=$GITHUB_WORKSPACE/build-dir
-      - name: Build libssh2
+          check: true
-        working-directory: libssh2
-        run: |
-          autoreconf -fi
-          ./configure --with-crypto=wolfssl --with-libwolfssl-prefix=$GITHUB_WORKSPACE/build-dir
-
-      - name: Update libssh2 test to use a stable version of debian
-        working-directory: libssh2
-        run: |
-            sed -i 's/testing-slim/oldstable-slim/' tests/openssh_server/Dockerfile
-
-      - name: Run libssh2 tests
-        working-directory: libssh2
-        run: make -j check
 
       - name: Confirm libssh2 built with wolfSSL
-        run: ldd libssh2/src/.libs/libssh2.so | grep wolfssl
+        working-directory: ./libssh2
-
+        run: ldd src/.libs/libssh2.so | grep wolfssl
-      - name: print server logs
-        if: ${{ failure() }}
-        run: tail -n +1 libssh2/tests/*.log

.github/workflows/libvncserver.yml

@@ -1,91 +0,0 @@
-name: libvncserver Tests
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  build_wolfssl:
-    name: Build wolfSSL
-    # Just to keep it the same as the testing target
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 4
-    steps:
-      - name: Build wolfSSL
-        uses: wolfSSL/actions-build-autotools-project@v1
-        with:
-          path: wolfssl
-          configure: --enable-all
-          install: true
-          # Don't run tests as this config is tested in many other places
-          check: false
-
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
-      - name: Upload built lib
-        uses: actions/upload-artifact@v4
-        with:
-          name: wolf-install-libvncserver
-          path: build-dir.tgz
-          retention-days: 5
-
-  build_libvncserver:
-    strategy:
-      fail-fast: false
-      matrix:
-        ref: [ 0.9.13, 0.9.14 ]
-    name: ${{ matrix.ref }}
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    needs: build_wolfssl
-    steps:
-      - name: Download lib
-        uses: actions/download-artifact@v4
-        with:
-          name: wolf-install-libvncserver
-
-      - name: Setup cmake version
-        uses: jwlawson/actions-setup-cmake@v2
-        with:
-          cmake-version: '3.25.x'
-
-      - name: untar build-dir
-        run: tar -xf build-dir.tgz
-
-      - name: Checkout OSP
-        uses: actions/checkout@v4
-        with:
-          repository: wolfssl/osp
-          path: osp
-
-      - name: Checkout libvncserver
-        uses: actions/checkout@v4
-        with:
-          repository: LibVNC/libvncserver
-          path: libvncserver
-          ref: LibVNCServer-${{ matrix.ref }}
-
-      - name: Build libvncserver
-        working-directory: libvncserver
-        run: |
-          patch -p1 < ../osp/libvncserver/${{ matrix.ref }}.patch
-          PKG_CONFIG_PATH=$GITHUB_WORKSPACE/build-dir/lib/pkgconfig \
-            cmake -DCMAKE_POLICY_VERSION_MINIMUM=3.5 -B build -DWITH_GNUTLS=OFF -DWITH_OPENSSL=OFF -DWITH_GCRYPT=OFF -DWITH_WOLFSSL=ON .
-          make -j -C build VERBOSE=1
-          ldd build/libvncclient.so | grep wolfssl
-          ldd build/libvncserver.so | grep wolfssl
-
-      - name: Run libvncserver tests
-        working-directory: libvncserver
-        run: make -C build test

.github/workflows/linuxkm.yml

@@ -1,54 +0,0 @@
-name: Kernel Module Build
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  build_library:
-    strategy:
-      matrix:
-        config: [
-          'EXTRA_CPPFLAGS=-Werror --enable-option-checking=fatal --enable-linuxkm --enable-linuxkm-lkcapi-register=all --enable-all --enable-kyber=yes,original --enable-lms --enable-xmss --enable-dilithium --enable-experimental --enable-dual-alg-certs --disable-qt --disable-quic --with-sys-crypto-policy=no --disable-opensslextra --disable-testcert --enable-intelasm --disable-sp-asm --enable-crypttests --enable-linuxkm-benchmarks CFLAGS="-DWOLFSSL_LINUXKM_VERBOSE_DEBUG -Wframe-larger-than=2048 -Wstack-usage=4096 -DBENCH_EMBEDDED -DBENCH_MIN_RUNTIME_SEC=0.01 -DBENCH_NTIMES=1 -DBENCH_AGREETIMES=1" --with-max-rsa-bits=16384',
-          'EXTRA_CPPFLAGS=-Werror --enable-option-checking=fatal --enable-linuxkm --enable-linuxkm-pie --enable-reproducible-build --enable-linuxkm-lkcapi-register=all --enable-all-crypto --enable-cryptonly --enable-kyber=yes,original --enable-lms --enable-xmss --enable-dilithium --enable-experimental --disable-qt --disable-quic --with-sys-crypto-policy=no --disable-opensslextra --disable-testcert --enable-intelasm --disable-sp-asm --enable-crypttests --enable-linuxkm-benchmarks CFLAGS="-DWOLFSSL_LINUXKM_VERBOSE_DEBUG -Wframe-larger-than=2048 -Wstack-usage=4096 -DBENCH_EMBEDDED -DBENCH_MIN_RUNTIME_SEC=0.01 -DBENCH_NTIMES=1 -DBENCH_AGREETIMES=1" --with-max-rsa-bits=16384'
-        ]
-    name: build module
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-latest
-    timeout-minutes: 5
-    steps:
-      - uses: actions/checkout@v4
-        name: Checkout wolfSSL
-
-      - name: Prepare target kernel for module builds
-        run: |
-          echo "updating linux-headers"
-          sudo apt-get update || $(exit 2)
-          sudo apt-get install linux-headers-$(uname -r) -y || $(exit 3)
-          echo "preparing target kernel $(uname -r)"
-          pushd "/lib/modules/$(uname -r)/build" || $(exit 4)
-          if [ -f /proc/config.gz ]; then gzip -dc /proc/config.gz > /tmp/.config && sudo mv /tmp/.config . || $(exit 5); elif [ -f "/boot/config-$(uname -r)" ]; then sudo cp -p "/boot/config-$(uname -r)" .config || $(exit 6); fi
-          sudo make -j 4 olddefconfig || $(exit 7)
-          sudo make M="$(pwd)" modules_prepare || $(exit 8)
-          popd >/dev/null
-
-      - name: autogen.sh
-        run: |
-          ./autogen.sh || $(exit 9)
-
-      - name: Build libwolfssl.ko, targeting GitHub ubuntu-latest, with --enable-all, PQC, and smallstack and stack depth warnings
-        run: |
-          echo "running ./configure --with-linux-source=/lib/modules/$(uname -r)/build ${{ matrix.config }}"
-          ./configure --with-linux-source=/lib/modules/$(uname -r)/build ${{ matrix.config }} || $(exit 10)
-          # try to remove profiling (-pg) because it leads to "_mcleanup: gmon.out: Permission denied"
-          make -j 4 KERNEL_EXTRA_CFLAGS_REMOVE=-pg FORCE_NO_MODULE_SIG=1 || $(exit 11)
-          ls -l linuxkm/libwolfssl.ko || $(exit 12)
-          echo "Successful linuxkm build."

.github/workflows/macos-apple-native-cert-validation.yml

@@ -1,26 +0,0 @@
-name: MacOS apple native cert validation tests
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  make_check:
-    if: github.repository_owner == 'wolfssl'
-    runs-on: macos-latest
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 5
-    steps:
-      - name: Build and configure wolfSSL
-        uses: wolfSSL/actions-build-autotools-project@v1
-        with:
-          configure: CFLAGS='-DWOLFSSL_APPLE_NATIVE_CERT_VALIDATION -DWOLFSSL_TEST_APPLE_NATIVE_CERT_VALIDATION -DRSA_MIN_SIZE=2048 -DNO_WOLFSSL_CIPHER_SUITE_TEST'
-

.github/workflows/mbedtls.sh

@@ -1,79 +0,0 @@
-#!/usr/bin/env bash
-
-set -e
-set -x
-
-# Basic TLS test
-./mbedtls/build/programs/ssl/ssl_server2 > /tmp/server.log 2>&1 &
-SERVER_PID=$!
-sleep 0.1
-./mbedtls/build/programs/ssl/ssl_client2 # Confirm working with mbed
-env -C wolfssl ./examples/client/client -p 4433 -g \
-  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
-  -c ../mbedtls/framework/data_files/cli-rsa-sha256.crt \
-  -k ../mbedtls/framework/data_files/cli-rsa-sha256.key.pem
-kill $SERVER_PID
-sleep 0.1
-env -C wolfssl ./examples/server/server -p 4433 -i -g \
-  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
-  -c ../mbedtls/framework/data_files/server2-sha256.crt \
-  -k ../mbedtls/framework/data_files/server2.key.pem > /tmp/server.log 2>&1 &
-SERVER_PID=$!
-sleep 0.1
-./mbedtls/build/programs/ssl/ssl_client2
-env -C wolfssl ./examples/client/client -p 4433 -g \
-  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
-  -c ../mbedtls/framework/data_files/cli-rsa-sha256.crt \
-  -k ../mbedtls/framework/data_files/cli-rsa-sha256.key.pem
-kill $SERVER_PID
-sleep 0.1
-
-# Basic DTLS test
-./mbedtls/build/programs/ssl/ssl_server2 dtls=1 > /tmp/server.log 2>&1 &
-SERVER_PID=$!
-sleep 0.1
-./mbedtls/build/programs/ssl/ssl_client2 dtls=1 # Confirm working with mbed
-env -C wolfssl ./examples/client/client -p 4433 -g -u \
-  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
-  -c ../mbedtls/framework/data_files/cli-rsa-sha256.crt \
-  -k ../mbedtls/framework/data_files/cli-rsa-sha256.key.pem
-kill $SERVER_PID
-sleep 0.1
-env -C wolfssl ./examples/server/server -p 4433 -i -g -u \
-  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
-  -c ../mbedtls/framework/data_files/server2-sha256.crt \
-  -k ../mbedtls/framework/data_files/server2.key.pem > /tmp/server.log 2>&1 &
-SERVER_PID=$!
-sleep 0.1
-env -C wolfssl ./examples/client/client -p 4433 -g -u \
-  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
-  -c ../mbedtls/framework/data_files/cli-rsa-sha256.crt \
-  -k ../mbedtls/framework/data_files/cli-rsa-sha256.key.pem
-./mbedtls/build/programs/ssl/ssl_client2 dtls=1
-kill $SERVER_PID
-sleep 0.1
-
-# DTLS 1.2 CID test
-./mbedtls/build/programs/ssl/ssl_server2 dtls=1 cid=1 cid_val=121212 > /tmp/server.log 2>&1 &
-SERVER_PID=$!
-sleep 0.1
-./mbedtls/build/programs/ssl/ssl_client2 dtls=1 cid=1 cid_val=232323  # Confirm working with mbed
-env -C wolfssl ./examples/client/client -p 4433 -g -u --cid 232323 \
-  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
-  -c ../mbedtls/framework/data_files/cli-rsa-sha256.crt \
-  -k ../mbedtls/framework/data_files/cli-rsa-sha256.key.pem
-kill $SERVER_PID
-sleep 0.1
-env -C wolfssl ./examples/server/server -p 4433 -i -g -u --cid 121212 \
-  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
-  -c ../mbedtls/framework/data_files/server2-sha256.crt \
-  -k ../mbedtls/framework/data_files/server2.key.pem > /tmp/server.log 2>&1 &
-SERVER_PID=$!
-sleep 0.1
-./mbedtls/build/programs/ssl/ssl_client2 dtls=1 cid_val=232323
-env -C wolfssl ./examples/client/client -p 4433 -g -u --cid 232323 \
-  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
-  -c ../mbedtls/framework/data_files/cli-rsa-sha256.crt \
-  -k ../mbedtls/framework/data_files/cli-rsa-sha256.key.pem
-kill $SERVER_PID
-sleep 0.1

.github/workflows/mbedtls.yml

@@ -1,86 +0,0 @@
-name: mbedtls interop Tests
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-env:
-  MBED_REF: v3.6.2
-
-jobs:
-  build_mbedtls:
-    name: Build mbedtls
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-latest
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 10
-    steps:
-      - name: Checking if we have mbed in cache
-        uses: actions/cache@v4
-        id: cache
-        with:
-          path: mbedtls
-          key: mbedtls-${{ env.MBED_REF }}
-          lookup-only: true
-
-      - name: Checkout mbedtls
-        if: steps.cache.outputs.cache-hit != 'true'
-        uses: actions/checkout@v4
-        with:
-          repository: Mbed-TLS/mbedtls
-          ref: ${{ env.MBED_REF }}
-          path: mbedtls
-
-      - name: Compile mbedtls
-        if: steps.cache.outputs.cache-hit != 'true'
-        working-directory: mbedtls
-        run: |
-          git submodule update --init
-          mkdir build
-          cd build
-          cmake ..
-          make -j
-          # convert key to pem format
-          openssl pkey -in framework/data_files/cli-rsa-sha256.key.der -text > framework/data_files/cli-rsa-sha256.key.pem
-          openssl pkey -in framework/data_files/server2.key.der -text > framework/data_files/server2.key.pem
-
-  mbedtls_test:
-    name: Test interop with mbedtls
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-latest
-    needs: build_mbedtls
-    timeout-minutes: 10
-    steps:
-      - name: Disable IPv6 (IMPORTANT, OTHERWISE DTLS MBEDTLS CLIENT WON'T CONNECT)
-        run: echo 1 | sudo tee /proc/sys/net/ipv6/conf/lo/disable_ipv6
-
-      - name: Checking if we have mbed in cache
-        uses: actions/cache/restore@v4
-        id: cache
-        with:
-          path: mbedtls
-          key: mbedtls-${{ env.MBED_REF }}
-          fail-on-cache-miss: true
-
-      - name: Build wolfSSL
-        uses: wolfSSL/actions-build-autotools-project@v1
-        with:
-          path: wolfssl
-          configure: --enable-dtls --enable-dtlscid
-          install: false
-          check: false
-
-      - name: Test interop
-        run: bash wolfssl/.github/workflows/mbedtls.sh
-
-      - name: print server logs
-        if: ${{ failure() }}
-        run: cat /tmp/server.log

.github/workflows/memcached.yml

@@ -16,8 +16,7 @@ jobs:
   build_wolfssl:
     name: Build wolfSSL
     # Just to keep it the same as the testing target
-    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
-    runs-on: ubuntu-24.04
     steps:
       - name: Build wolfSSL
         uses: wolfSSL/actions-build-autotools-project@v1
@@ -29,14 +28,11 @@ jobs:
       - name: Bundle Docker entry point
         run: cp wolfssl/.github/workflows/memcached.sh build-dir/bin
 
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-memcached
-          path: build-dir.tgz
+          path: build-dir
           retention-days: 5
 
   memcached_check:
@@ -47,17 +43,14 @@ jobs:
         include:
           - ref: 1.6.22
     name: ${{ matrix.ref }}
-    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
-    runs-on: ubuntu-24.04
     needs: build_wolfssl
     steps:
       - name: Download lib
         uses: actions/download-artifact@v4
         with:
           name: wolf-install-memcached
-
+          path: build-dir
-      - name: untar build-dir
-        run: tar -xf build-dir.tgz
 
       - name: Checkout OSP
         uses: actions/checkout@v4

.github/workflows/mono.yml

@@ -1,142 +0,0 @@
-name: Linux Mono C# Build Test
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  build_wolfssl:
-    name: Build wolfSSL C# Wrapper
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    timeout-minutes: 10
-    steps:
-
-    # Build wolfSSL using the user_settings.h from the C# wrapper directory
-    - name: Build wolfSSL
-      uses: wolfSSL/actions-build-autotools-project@v1
-      with:
-        path: wolfssl
-        configure: --enable-usersettings CPPFLAGS=-I$GITHUB_WORKSPACE/wolfssl/wrapper/CSharp
-        install: true
-        check: false
-
-    - name: Install mono-complete
-      run: |
-        sudo apt-get update
-        sudo apt-get install -y mono-complete
-
-    - name: Copy wolfSSL.dll to C# wrapper directory
-      run: |
-        echo "Copying wolfSSL.dll to C# wrapper directory. $GITHUB_WORKSPACE/build-dir/lib contains:"
-        ls -la $GITHUB_WORKSPACE/build-dir/lib/*
-        cp $GITHUB_WORKSPACE/build-dir/lib/libwolfssl.so $GITHUB_WORKSPACE/wolfssl/wrapper/CSharp/wolfssl.dll
-        cp $GITHUB_WORKSPACE/build-dir/lib/libwolfssl.so $GITHUB_WORKSPACE/wolfssl/wrapper/CSharp/libwolfssl.so
-
-    - name: Build and run wolfCrypt test wrapper
-      working-directory: wolfssl/wrapper/CSharp
-      run: |
-        mcs wolfCrypt-Test/wolfCrypt-Test.cs wolfSSL_CSharp/wolfCrypt.cs wolfSSL_CSharp/wolfSSL.cs wolfSSL_CSharp/X509.cs -OUT:wolfcrypttest.exe
-        mono wolfcrypttest.exe
-
-    - name: Build wolfSSL client/server test
-      working-directory: wolfssl/wrapper/CSharp
-      env:
-        LD_LIBRARY_PATH: $GITHUB_WORKSPACE/build-dir/lib
-      run: |
-        mcs wolfSSL_CSharp/wolfSSL.cs wolfSSL_CSharp/X509.cs wolfSSL-TLS-Server/wolfSSL-TLS-Server.cs -OUT:server.exe
-        mcs wolfSSL_CSharp/wolfCrypt.cs wolfSSL-TLS-Client/wolfSSL-TLS-Client.cs wolfSSL_CSharp/wolfSSL.cs wolfSSL_CSharp/X509.cs -OUT:client.exe
-
-    - name: Test wolfSSL client/server communication
-      working-directory: wolfssl/wrapper/CSharp
-      env:
-        LD_LIBRARY_PATH: $GITHUB_WORKSPACE/build-dir/lib
-      run: |
-        # Start server in background and capture its PID
-        timeout 10s mono server.exe > server.log 2>&1 &
-        SERVER_PID=$!
-
-        # Wait for server to start
-        sleep 2
-
-        # Run client and capture output
-        timeout 5s mono client.exe > client.log 2>&1
-        CLIENT_EXIT_CODE=$?
-
-        # Wait a moment for server to process
-        sleep 1
-
-        # Kill server
-        kill $SERVER_PID 2>/dev/null || true
-
-        # Check if client completed successfully (exit code 0)
-        if [ $CLIENT_EXIT_CODE -eq 0 ]; then
-          echo "Client completed successfully"
-        else
-          echo "Client failed with exit code $CLIENT_EXIT_CODE"
-          cat client.log
-          exit 1
-        fi
-
-        # Check for success indicators in logs
-        if grep -q "SSL version is" client.log && grep -q "SSL cipher suite is" client.log; then
-          echo "TLS handshake successful - SSL version and cipher suite detected"
-        else
-          echo "TLS handshake failed - no SSL version/cipher detected"
-          echo "Client log:"
-          cat client.log
-          echo "Server log:"
-          cat server.log
-          exit 1
-        fi
-
-    - name: Test SNI functionality
-      working-directory: wolfssl/wrapper/CSharp
-      env:
-        LD_LIBRARY_PATH: $GITHUB_WORKSPACE/build-dir/lib
-      run: |
-        # Start server with SNI support in background
-        timeout 10s mono server.exe -S > server_sni.log 2>&1 &
-        SERVER_PID=$!
-
-        # Wait for server to start
-        sleep 2
-
-        # Run client with SNI and capture output
-        timeout 5s mono client.exe -S localhost > client_sni.log 2>&1
-        CLIENT_EXIT_CODE=$?
-
-        # Wait a moment for server to process
-        sleep 1
-
-        # Kill server
-        kill $SERVER_PID 2>/dev/null || true
-
-        # Check if client completed successfully
-        if [ $CLIENT_EXIT_CODE -eq 0 ]; then
-          echo "SNI client completed successfully"
-        else
-          echo "SNI client failed with exit code $CLIENT_EXIT_CODE"
-          cat client_sni.log
-          exit 1
-        fi
-
-        # Check for SNI success indicators
-        if grep -q "SSL version is" client_sni.log && grep -q "SSL cipher suite is" client_sni.log; then
-          echo "SNI TLS handshake successful"
-        else
-          echo "SNI TLS handshake failed"
-          echo "Client log:"
-          cat client_sni.log
-          echo "Server log:"
-          cat server_sni.log
-          exit 1
-        fi

.github/workflows/mosquitto.yml

@@ -1,105 +0,0 @@
-name: mosquitto Tests
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  build_wolfssl:
-    name: Build wolfSSL
-    # Just to keep it the same as the testing target
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 4
-    steps:
-      - name: Build wolfSSL
-        uses: wolfSSL/actions-build-autotools-project@v1
-        with:
-          path: wolfssl
-          configure: --enable-mosquitto CFLAGS="-DALLOW_INVALID_CERTSIGN"
-          install: true
-
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
-      - name: Upload built lib
-        uses: actions/upload-artifact@v4
-        with:
-          name: wolf-install-mosquitto
-          path: build-dir.tgz
-          retention-days: 5
-
-  mosquitto_check:
-    strategy:
-      fail-fast: false
-      matrix:
-        ref: [ 2.0.18 ]
-    name: ${{ matrix.ref }}
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 4
-    needs: build_wolfssl
-    steps:
-      - name: Download lib
-        uses: actions/download-artifact@v4
-        with:
-          name: wolf-install-mosquitto
-
-      - name: untar build-dir
-        run: tar -xf build-dir.tgz
-
-      - name: Checkout OSP
-        uses: actions/checkout@v4
-        with:
-          repository: wolfssl/osp
-          path: osp
-
-      - name: Install dependencies
-        run: |
-            export DEBIAN_FRONTEND=noninteractive
-            sudo apt-get update
-            sudo apt-get install -y build-essential libev-dev libssl-dev automake python3-docutils libcunit1 libcunit1-doc libcunit1-dev pkg-config make python3-psutil
-
-      - name: Checkout mosquitto
-        uses: actions/checkout@v4
-        with:
-          repository: eclipse/mosquitto
-          ref: v${{ matrix.ref }}
-          path: mosquitto
-
-      - name: Update certs
-        run: |
-            cd $GITHUB_WORKSPACE/mosquitto/test/ssl
-            ./gen.sh
-            cat all-ca.crt >> server.crt
-
-      - name: Configure and build mosquitto
-        run: |
-            cd $GITHUB_WORKSPACE/mosquitto/
-            patch -p1 < $GITHUB_WORKSPACE/osp/mosquitto/${{ matrix.ref }}.patch
-            make WITH_TLS=wolfssl WITH_CJSON=no WITH_DOCS=no WOLFSSLDIR=$GITHUB_WORKSPACE/build-dir
-
-      - name: Run mosquitto tests
-        working-directory: ./mosquitto
-        run: |
-          # Retry up to five times
-          for i in {1..5}; do
-            TEST_RES=0
-            make WITH_TLS=wolfssl WITH_CJSON=no WITH_DOCS=no WOLFSSLDIR=$GITHUB_WORKSPACE/build-dir ptest || TEST_RES=$?
-            if [ "$TEST_RES" -eq "0" ]; then
-              break
-            fi
-          done
-          if [ "$TEST_RES" -ne "0" ]; then
-            exit $TEST_RES
-          fi

.github/workflows/msys2.yml

@@ -1,37 +0,0 @@
-name: MSYS2 Build Test
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  msys2:
-    if: github.repository_owner == 'wolfssl'
-    runs-on: windows-latest
-    defaults:
-      run:
-        shell: msys2 {0}
-    steps:
-      - uses: actions/checkout@v3
-      - uses: msys2/setup-msys2@v2
-        with:
-          msystem: msys
-          update: true
-          install: git gcc autotools base-devel autoconf netcat
-      - name: configure wolfSSL
-        run: ./autogen.sh && ./configure --disable-sys-ca-certs CFLAGS="-DUSE_CERT_BUFFERS_2048 -DUSE_CERT_BUFFERS_256 -DNO_WRITE_TEMP_FILES"
-      - name: build wolfSSL
-        run: make
-      - name: run tests
-        run: make check
-      - name: Display log
-        if: always()
-        run: cat test-suite.log

.github/workflows/multi-arch.yml

@@ -30,16 +30,13 @@ jobs:
           - HOST: riscv64-linux-gnu
             CC: riscv64-linux-gnu-gcc
             ARCH: riscv64
-            EXTRA_OPTS: --enable-riscv-asm
           # Config to ensure CPUs without Thumb instructions compiles
           - HOST: arm-linux-gnueabi
             CC: arm-linux-gnueabi-gcc
             CFLAGS: -marm -DWOLFSSL_SP_ARM_ARCH=6
             ARCH: armel
             EXTRA_OPTS: --enable-sp-asm
-        opts: [ '-O2', '-O3', '-O1 -UFP_ECC', '-O0', '-Os', '-Ofast' ]
+    runs-on: ubuntu-latest
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 10
     steps:
@@ -48,12 +45,12 @@ jobs:
           sudo apt update
           sudo apt install -y crossbuild-essential-${{ matrix.ARCH }} qemu-user
       - uses: actions/checkout@v4
-      - name: Build for ${{ matrix.ARCH }} with Opt Level ${{ matrix.opts }}
+      - name: Build
         env:
             CC: ${{ matrix.CC }}
-            CFLAGS: ${{ matrix.CFLAGS }} ${{ matrix.opts }}
+            CFLAGS: ${{ matrix.CFLAGS }}
             QEMU_LD_PREFIX: /usr/${{ matrix.HOST }}
-        run: ./autogen.sh && ./configure --host=${{ matrix.HOST }} --enable-all --disable-examples CPPFLAGS="-pedantic -Wdeclaration-after-statement -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE -DWOLFCRYPT_TEST_LINT" ${{ matrix.EXTRA_OPTS }} && make
+        run: ./autogen.sh && ./configure --host=${{ matrix.HOST }} --enable-all --disable-examples ${{ matrix.EXTRA_OPTS }} && make
       - name: Print errors 
         if: ${{ failure() }}
         run: |

.github/workflows/multi-compiler.yml

@@ -21,35 +21,41 @@ jobs:
         include:
           - CC: gcc-9
             CXX: g++-9
-            OS: ubuntu-24.04
+            OS: ubuntu-latest
           - CC: gcc-10
             CXX: g++-10
-            OS: ubuntu-24.04
+            OS: ubuntu-latest
           - CC: gcc-11
             CXX: g++-11
-            OS: ubuntu-24.04
+            OS: ubuntu-latest
           - CC: gcc-12
             CXX: g++-12
-            OS: ubuntu-24.04
+            OS: ubuntu-latest
+          - CC: clang-10
+            CXX: clang++-10
+            OS: ubuntu-20.04
+          - CC: clang-11
+            CXX: clang++-11
+            OS: ubuntu-20.04
+          - CC: clang-12
+            CXX: clang++-12
+            OS: ubuntu-20.04
+          - CC: clang-13
+            CXX: clang++-13
+            OS: ubuntu-latest
           - CC: clang-14
             CXX: clang++-14
-            OS: ubuntu-24.04
+            OS: ubuntu-latest
-          - CC: clang-19
-            CXX: clang++-19
-            OS: ubuntu-24.04
-    if: github.repository_owner == 'wolfssl'
     runs-on: ${{ matrix.OS }}
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     steps:
-      - name: Install dependencies
-        run: export DEBIAN_FRONTEND=noninteractive && sudo apt-get update && sudo apt-get install -y ${{ matrix.CC }}
       - uses: actions/checkout@v4
       - name: Build
         env:
             CC: ${{ matrix.CC }}
             CXX: ${{ matrix.CXX }}
-        run: ./autogen.sh && ./configure CFLAGS="-pedantic -Wdeclaration-after-statement" && make && make dist
+        run: ./autogen.sh && ./configure && make && make dist
       - name: Show log on errors
         if: ${{ failure() }}
         run: |

.github/workflows/net-snmp.yml

@@ -1,84 +0,0 @@
-name: net-snmp Tests
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  build_wolfssl:
-    name: Build wolfSSL
-    if: github.repository_owner == 'wolfssl'
-    # Just to keep it the same as the testing target
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 4
-    steps:
-      - name: Build wolfSSL
-        uses: wolfSSL/actions-build-autotools-project@v1
-        with:
-          path: wolfssl
-          configure: --enable-net-snmp
-          install: true
-
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
-      - name: Upload built lib
-        uses: actions/upload-artifact@v4
-        with:
-          name: wolf-install-net-snmp
-          path: build-dir.tgz
-          retention-days: 5
-
-  net-snmp_check:
-    strategy:
-      fail-fast: false
-      matrix:
-        # List of releases to test
-        include:
-          - ref: 5.9.3
-            test_opts: -e 'agentxperl'
-    name: ${{ matrix.ref }}
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 4
-    needs: build_wolfssl
-    steps:
-      - name: Download lib
-        uses: actions/download-artifact@v4
-        with:
-          name: wolf-install-net-snmp
-
-      - name: untar build-dir
-        run: tar -xf build-dir.tgz
-
-      - name: Checkout OSP
-        uses: actions/checkout@v4
-        with:
-          repository: wolfssl/osp
-          path: osp
-
-      - name: Build net-snmp
-        uses: wolfSSL/actions-build-autotools-project@v1
-        with:
-          repository: net-snmp/net-snmp
-          ref: v${{ matrix.ref }}
-          path: net-snmp
-          patch-file: $GITHUB_WORKSPACE/osp/net-snmp/${{ matrix.ref }}.patch
-          configure: --disable-shared --with-wolfssl=$GITHUB_WORKSPACE/build-dir
-          check: false
-
-      - name: Run net-snmp tests
-        working-directory: net-snmp
-        run: |
-          autoconf --version | grep -P '2\.\d\d' -o > dist/autoconf-version
-          make -j test TESTOPTS="${{ matrix.test_opts }}"

.github/workflows/nginx.yml

@@ -15,9 +15,8 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
-    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
-    runs-on: ubuntu-24.04
+    runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     steps:
@@ -34,14 +33,11 @@ jobs:
           configure: --enable-nginx ${{ env.wolf_debug_flags }}
           install: true
 
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-nginx
-          path: build-dir.tgz
+          path: build-dir
           retention-days: 5
 
   nginx_check:
@@ -106,8 +102,7 @@ jobs:
               stream_proxy_protocol_ssl.t stream_proxy_ssl_conf_command.t stream_proxy_ssl.t
               stream_proxy_ssl_verify.t
     name: ${{ matrix.ref }}
-    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
-    runs-on: ubuntu-24.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 6
     needs: build_wolfssl
@@ -116,34 +111,11 @@ jobs:
         uses: actions/download-artifact@v4
         with:
           name: wolf-install-nginx
-
+          path: build-dir
-      - name: untar build-dir
-        run: tar -xf build-dir.tgz
 
       - name: Install dependencies
         run: |
-          sudo cpan -iT Proc::Find
+          sudo cpan -iT Proc::Find Net::SSLeay IO::Socket::SSL
-
-      # Locking in the version of SSLeay used with testing
-      - name: Download and install Net::SSLeay 1.94 manually
-        run: |
-          curl -LO https://www.cpan.org/modules/by-module/Net/CHRISN/Net-SSLeay-1.94.tar.gz
-          tar -xzf Net-SSLeay-1.94.tar.gz
-          cd Net-SSLeay-1.94
-          perl Makefile.PL
-          make
-          sudo make install
-
-      # SSL version 2.091 changes '' return to undef causing test case to fail.
-      # Locking in the test version to use as 2.090
-      - name: Download and install IO::Socket::SSL 2.090 manually
-        run: |
-          curl -LO https://www.cpan.org/modules/by-module/IO/IO-Socket-SSL-2.090.tar.gz
-          tar -xzf IO-Socket-SSL-2.090.tar.gz
-          cd IO-Socket-SSL-2.090
-          perl Makefile.PL
-          make
-          sudo make install
 
       - name: Checkout wolfssl-nginx
         uses: actions/checkout@v4

.github/workflows/no-malloc.yml

@@ -18,11 +18,10 @@ jobs:
       matrix:
         config: [
           # Add new configs here
-          '--enable-rsa --enable-keygen --disable-dh CFLAGS="-DWOLFSSL_NO_MALLOC -DRSA_MIN_SIZE=1024 -pedantic -Wdeclaration-after-statement -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE"',
+          '--enable-rsa --enable-keygen --disable-dh CFLAGS="-DWOLFSSL_NO_MALLOC"',
         ]
     name: make check
-    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
-    runs-on: ubuntu-24.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 6
     steps:

.github/workflows/no-tls.yml

@@ -1,49 +0,0 @@
-name: --disable-tls Tests
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  make_check:
-    strategy:
-      matrix:
-        config: [
-          # Add new configs here
-          '--disable-tls --enable-all CFLAGS="-pedantic -Wdeclaration-after-statement -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE"',
-        ]
-    name: make check
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 6
-    steps:
-      - uses: actions/checkout@v4
-        name: Checkout wolfSSL
-
-      - name: Test wolfSSL
-        run: |
-          ./autogen.sh
-          ./configure ${{ matrix.config }}
-          make -j 4
-          make check
-
-      - name: Print errors
-        if: ${{ failure() }}
-        run: |
-          for file in scripts/*.log
-          do
-              if [ -f "$file" ]; then
-                  echo "${file}:"
-                  cat "$file"
-                  echo "========================================================================"
-              fi
-          done

.github/workflows/nss.sh

@@ -1,27 +0,0 @@
-#!/usr/bin/env bash
-
-set -e
-set -x
-
-# Setup nss cert db
-mkdir nssdb
-./dist/Debug/bin/certutil -d nssdb -N --empty-password
-./dist/Debug/bin/certutil -d nssdb  -A -a -i  wolfssl/certs/test/server-localhost.pem \
-    -t TCP -n 'wolf localhost'
-
-# App data for nss
-echo Hello from nss > /tmp/in
-
-# TLS 1.3 test
-env -C wolfssl ./examples/server/server -v 4 -p 4433 \
-    -c certs/test/server-localhost.pem -d -w > /tmp/server.log 2>&1 &
-sleep 0.1
-./dist/Debug/bin/tstclnt -V tls1.3: -h localhost -p 4433 -d nssdb -C -4 -A /tmp/in -v
-sleep 0.1
-
-# DTLS 1.3 test
-env -C wolfssl ./examples/server/server -v 4 -p 4433 -u \
-    -c certs/test/server-localhost.pem -d -w > /tmp/server.log 2>&1 &
-sleep 0.1
-./dist/Debug/bin/tstclnt -V tls1.3: -P client -h localhost -p 4433 -d nssdb -C -4 -A /tmp/in -v
-sleep 0.1

.github/workflows/nss.yml

@@ -1,89 +0,0 @@
-name: nss interop Tests
-
-### TODO uncomment stuff
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-env:
-  NSS_REF: NSS_3_107_RTM
-
-jobs:
-  build_nss:
-    name: Build nss
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 30
-    steps:
-      - name: Checking if we have nss in cache
-        uses: actions/cache@v4
-        id: cache
-        with:
-          path: dist
-          key: nss-${{ env.NSS_REF }}
-          lookup-only: true
-
-      - name: Install dependencies
-        if: steps.cache.outputs.cache-hit != 'true'
-        run: |
-          # Don't prompt for anything
-          export DEBIAN_FRONTEND=noninteractive
-          sudo apt-get update
-          # hostap dependencies
-          sudo apt-get install -y gyp ninja-build
-
-      - name: Checkout nss
-        if: steps.cache.outputs.cache-hit != 'true'
-        uses: actions/checkout@v4
-        with:
-          repository: nss-dev/nss
-          ref: ${{ env.NSS_REF }}
-          path: nss
-
-      - name: Compile nss
-        if: steps.cache.outputs.cache-hit != 'true'
-        run: |
-          hg clone https://hg.mozilla.org/projects/nspr
-          cd nss
-          ./build.sh
-
-  nss_test:
-    name: Test interop with nss
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    needs: build_nss
-    timeout-minutes: 10
-    steps:
-      - name: Checking if we have nss in cache
-        uses: actions/cache/restore@v4
-        id: cache
-        with:
-          path: dist
-          key: nss-${{ env.NSS_REF }}
-          fail-on-cache-miss: true
-
-      - name: Build wolfSSL
-        uses: wolfSSL/actions-build-autotools-project@v1
-        with:
-          path: wolfssl
-          configure: --enable-dtls --enable-dtls13
-          install: false
-          check: false
-
-      - name: Test interop
-        run: bash wolfssl/.github/workflows/nss.sh
-
-      - name: print server logs
-        if: ${{ failure() }}
-        run: |
-          cat /tmp/server.log

.github/workflows/ntp.yml

@@ -1,93 +0,0 @@
-name: ntp Tests
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  build_wolfssl:
-    name: Build wolfSSL
-    if: github.repository_owner == 'wolfssl'
-    # Just to keep it the same as the testing target
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 4
-    steps:
-      - name: Build wolfSSL
-        uses: wolfSSL/actions-build-autotools-project@v1
-        with:
-          path: wolfssl
-          configure: --enable-all
-          install: true
-          check: false
-
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
-      - name: Upload built lib
-        uses: actions/upload-artifact@v4
-        with:
-          name: wolf-install-ntp
-          path: build-dir.tgz
-          retention-days: 5
-
-  ntp_check:
-    strategy:
-      fail-fast: false
-      matrix:
-        # List of releases to test
-        ref: [ 4.2.8p15, 4.2.8p17 ]
-    name: ${{ matrix.ref }}
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 10
-    needs: build_wolfssl
-    steps:
-      - name: Download lib
-        uses: actions/download-artifact@v4
-        with:
-          name: wolf-install-ntp
-
-      - name: untar build-dir
-        run: tar -xf build-dir.tgz
-
-      - name: Checkout OSP
-        uses: actions/checkout@v4
-        with:
-          repository: wolfssl/osp
-          path: osp
-
-      # Avoid DoS'ing ntp site so cache the tar.gz
-      - name: Check if we have ntp
-        uses: actions/cache@v4
-        id: cache
-        with:
-          path: ntp-${{ matrix.ref }}.tar.gz
-          key: ntp-${{ matrix.ref }}.tar.gz
-
-      - name: Download ntp
-        if: steps.cache.outputs.cache-hit != 'true'
-        run: |
-          wget https://downloads.nwtime.org/ntp/4.2.8/ntp-${{ matrix.ref }}.tar.gz
-
-      - name: Extract ntp
-        run: |
-          tar -xf ntp-${{ matrix.ref }}.tar.gz
-
-      - name: Build and test ntp
-        working-directory: ntp-${{ matrix.ref }}
-        run: |
-          patch -p1 < $GITHUB_WORKSPACE/osp/ntp/${{ matrix.ref }}/ntp-${{ matrix.ref }}.patch
-          ./bootstrap
-          ./configure --with-wolfssl=$GITHUB_WORKSPACE/build-dir
-          make -j
-          make -j check

.github/workflows/ocsp.yml

@@ -15,8 +15,7 @@ concurrency:
 jobs:
   ocsp_stapling:
     name: ocsp stapling
-    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
-    runs-on: ubuntu-24.04
     timeout-minutes: 10
     steps:
       - name: Checkout wolfSSL

.github/workflows/openldap.yml

@@ -1,93 +0,0 @@
-name: openldap Tests
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  build_wolfssl:
-    name: Build wolfSSL
-    if: github.repository_owner == 'wolfssl'
-    # Just to keep it the same as the testing target
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 4
-    steps:
-      - name: Build wolfSSL
-        uses: wolfSSL/actions-build-autotools-project@v1
-        with:
-          path: wolfssl
-          configure: --enable-openldap CPPFLAGS=-DWOLFSSL_NO_ASN_STRICT
-          install: true
-          check: true
-
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
-      - name: Upload built lib
-        uses: actions/upload-artifact@v4
-        with:
-          name: wolf-install-openldap
-          path: build-dir.tgz
-          retention-days: 5
-
-  openldap_check:
-    strategy:
-      fail-fast: false
-      matrix:
-        include:
-          # List of releases to test
-          - osp_ref: 2.5.13
-            git_ref: OPENLDAP_REL_ENG_2_5_13
-          - osp_ref: 2.6.7
-            git_ref: OPENLDAP_REL_ENG_2_6_7
-    name: ${{ matrix.osp_ref }}
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 20
-    needs: build_wolfssl
-    steps:
-      - name: Download lib
-        uses: actions/download-artifact@v4
-        with:
-          name: wolf-install-openldap
-
-      - name: untar build-dir
-        run: tar -xf build-dir.tgz
-
-      - name: Checkout OSP
-        uses: actions/checkout@v4
-        with:
-          repository: wolfssl/osp
-          path: osp
-
-      - name: Checkout openldap
-        uses: actions/checkout@v4
-        with:
-          repository: openldap/openldap
-          path: openldap
-          ref: ${{ matrix.git_ref }}
-
-      - name: Build and test OpenLDAP
-        working-directory: openldap
-        run: |
-          export LD_LIBRARY_PATH=$GITHUB_WORKSPACE/build-dir/lib:$LD_LIBRARY_PATH
-          patch -p1 < $GITHUB_WORKSPACE/osp/openldap/${{ matrix.osp_ref }}/openldap-${{ matrix.osp_ref }}.patch
-          rm aclocal.m4
-          autoreconf -ivf
-          ./configure --with-tls=wolfssl --disable-bdb --disable-hdb \
-            CFLAGS="-I$GITHUB_WORKSPACE/build-dir/include \
-              -I$GITHUB_WORKSPACE/build-dir/include/wolfssl \
-              -L$GITHUB_WORKSPACE/build-dir/lib"
-          make -j depend
-          make -j
-          make -j check

.github/workflows/openssh.yml

@@ -15,9 +15,8 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
-    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
-    runs-on: ubuntu-24.04
+    runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     steps:
@@ -27,17 +26,14 @@ jobs:
           path: wolfssl
           configure: >-
             --enable-openssh --enable-dsa --with-max-rsa-bits=8192
-            --enable-intelasm --enable-sp-asm CFLAGS="-DRSA_MIN_SIZE=1024"
+            --enable-intelasm --enable-sp-asm
           install: true
 
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-openssh
-          path: build-dir.tgz
+          path: build-dir
           retention-days: 5
 
   openssh_check:
@@ -45,42 +41,17 @@ jobs:
       fail-fast: false
       matrix:
         include:
-          # A good way to measure how much each test takes is to create a bash script
-          # in the openssh root like this (make it executable):
-          # time-measure.sh
-          #   #!/bin/bash
-          #   /usr/bin/time -a -o /tmp/LTESTS-times.txt -f '%e %C' /usr/bin/bash "$@"
-          # And invoke the openssh tests like this:
-          #   rm -f /tmp/LTESTS-times.txt && \
-          #     make tests TEST_SHELL=$(pwd)/time-measure.sh SKIP_UNIT=yes && \
-          #     grep test-exec.sh /tmp/LTESTS-times.txt
           - git_ref: 'V_9_6_P1'
             osp_ver: '9.6'
-            SKIP_LTESTS: >-
+    name: ${{ matrix.ref }}
-              exit-status rekey multiplex cert-userkey forward-control integrity
+    runs-on: ubuntu-latest
-              channel-timeout connection-timeout
-          - git_ref: 'V_9_9_P2'
-            osp_ver: '9.9p2'
-            SKIP_LTESTS: >-
-              exit-status rekey multiplex cert-userkey forward-control integrity
-              channel-timeout connection-timeout
-          - git_ref: 'V_10_0_P2'
-            osp_ver: '10.0p2'
-            SKIP_LTESTS: >-
-              exit-status rekey multiplex forward-control channel-timeout
-              connection-timeout
-    name: ${{ matrix.osp_ver }}
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
     needs: build_wolfssl
     steps:
       - name: Download lib
         uses: actions/download-artifact@v4
         with:
           name: wolf-install-openssh
-
+          path: build-dir
-      - name: untar build-dir
-        run: tar -xf build-dir.tgz
 
       - name: Checkout OSP
         uses: actions/checkout@v4
@@ -102,4 +73,5 @@ jobs:
       - name: Run tests
         working-directory: ./openssh
         run: |
-          make tests SKIP_LTESTS='${{ matrix.SKIP_LTESTS }}'
+          # Run all the tests except (t-exec) as it takes too long
+          make file-tests interop-tests extra-tests unit

.github/workflows/opensslcoexist.yml

@@ -1,50 +0,0 @@
-name: OPENSSL_COEXIST and TEST_OPENSSL_COEXIST
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  make_check:
-    strategy:
-      matrix:
-        config: [
-          # Add new configs here
-          '--verbose --enable-all --disable-all-osp --disable-opensslall --enable-opensslcoexist CPPFLAGS="-DNO_WOLFSSL_CIPHER_SUITE_TEST -pedantic -Wdeclaration-after-statement -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE"',
-          '--verbose --enable-all --disable-all-osp --disable-opensslall --enable-opensslcoexist CPPFLAGS="-DNO_WOLFSSL_CIPHER_SUITE_TEST -pedantic -DTEST_OPENSSL_COEXIST -Wdeclaration-after-statement -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE"'
-        ]
-    name: make check
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 6
-    steps:
-      - uses: actions/checkout@v4
-        name: Checkout wolfSSL
-
-      - name: Test --enable-opensslcoexist and TEST_OPENSSL_COEXIST
-        run: |
-          ./autogen.sh || $(exit 2)
-          ./configure ${{ matrix.config }} || $(exit 3)
-          make -j 4 || $(exit 4)
-          make check
-
-      - name: Print errors
-        if: ${{ failure() }}
-        run: |
-          for file in config.log scripts/*.log
-          do
-              if [ -f "$file" ]; then
-                  echo "${file}:"
-                  cat "$file"
-                  echo "========================================================================"
-              fi
-          done

.github/workflows/openvpn.yml

@@ -15,9 +15,8 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
-    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
-    runs-on: ubuntu-24.04
+    runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     steps:
@@ -28,14 +27,11 @@ jobs:
           configure: --enable-openvpn
           install: true
 
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-openvpn
-          path: build-dir.tgz
+          path: build-dir
           retention-days: 5
 
   openvpn_check:
@@ -43,10 +39,9 @@ jobs:
       fail-fast: false
       matrix:
         # List of refs to test
-        ref: [ release/2.6, master ]
+        ref: [ release/2.6, v2.6.0, master ]
     name: ${{ matrix.ref }}
-    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
-    runs-on: ubuntu-24.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 10
     needs: build_wolfssl
@@ -55,9 +50,7 @@ jobs:
         uses: actions/download-artifact@v4
         with:
           name: wolf-install-openvpn
-
+          path: build-dir
-      - name: untar build-dir
-        run: tar -xf build-dir.tgz
 
       - name: Install dependencies
         run: |

.github/workflows/os-check.yml

@@ -17,14 +17,12 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        os: [ ubuntu-24.04, macos-latest ]
+        os: [ ubuntu-latest, macos-latest ]
         config: [
           # Add new configs here
           '',
           '--enable-all --enable-asn=template',
           '--enable-all --enable-asn=original',
-          '--enable-all --enable-asn=template CPPFLAGS=-DWOLFSSL_OLD_OID_SUM',
-          '--enable-all --enable-asn=original CPPFLAGS=-DWOLFSSL_OLD_OID_SUM',
           '--enable-harden-tls',
           '--enable-tls13 --enable-session-ticket --enable-dtls --enable-dtls13
              --enable-opensslextra --enable-sessioncerts 
@@ -35,55 +33,8 @@ jobs:
           '--enable-dtls --enable-dtls13 --enable-earlydata 
              --enable-session-ticket --enable-psk 
              CPPFLAGS=''-DWOLFSSL_DTLS13_NO_HRR_ON_RESUME'' ',
-          '--enable-experimental --enable-kyber --enable-dtls --enable-dtls13
-             --enable-dtls-frag-ch',
-          '--enable-all --enable-dtls13 --enable-dtls-frag-ch',
-          '--enable-dtls --enable-dtls13 --enable-dtls-frag-ch
-           --enable-dtls-mtu',
-          '--enable-dtls --enable-dtlscid --enable-dtls13 --enable-secure-renegotiation
-            --enable-psk --enable-aesccm --enable-nullcipher
-            CPPFLAGS=-DWOLFSSL_STATIC_RSA',
-          '--enable-ascon --enable-experimental',
-          '--enable-ascon CPPFLAGS=-DWOLFSSL_ASCON_UNROLL --enable-experimental',
-          '--enable-all CPPFLAGS=''-DNO_AES_192 -DNO_AES_256'' ',
-          '--enable-sniffer --enable-curve25519 --enable-curve448 --enable-enckeys
-            CPPFLAGS=-DWOLFSSL_DH_EXTRA',
-          '--enable-dtls --enable-dtls13 --enable-dtls-frag-ch
-            --enable-dtls-mtu CPPFLAGS=-DWOLFSSL_DTLS_RECORDS_CAN_SPAN_DATAGRAMS',
-          '--enable-opensslall --enable-opensslextra CPPFLAGS=-DWC_RNG_SEED_CB',
-          '--enable-opensslall --enable-opensslextra
-            CPPFLAGS=''-DWC_RNG_SEED_CB -DWOLFSSL_NO_GETPID'' ',
-          '--enable-opensslextra CPPFLAGS=''-DWOLFSSL_NO_CA_NAMES'' ',
-          '--enable-opensslextra=x509small',
-          'CPPFLAGS=''-DWOLFSSL_EXTRA'' ',
-          '--enable-lms=small,verify-only --enable-xmss=small,verify-only',
-          '--disable-sys-ca-certs',
-          '--enable-all CPPFLAGS=-DWOLFSSL_DEBUG_CERTS ',
-          '--enable-all CPPFLAGS="-DWOLFSSL_CHECK_MEM_ZERO"',
-          '--enable-coding=no',
-          '--enable-dtls --enable-dtls13 --enable-ocspstapling --enable-ocspstapling2
-           --enable-cert-setup-cb --enable-sessioncerts',
-          '--enable-dtls --enable-dtls13 --enable-tls13
-           CPPFLAGS=-DWOLFSSL_TLS13_IGNORE_PT_ALERT_ON_ENC',
-          '--disable-sni --disable-ecc --disable-tls13 --disable-secure-renegotiation-info',
-          'CPPFLAGS=-DWOLFSSL_BLIND_PRIVATE_KEY',
-          '--enable-all --enable-certgencache',
-          '--enable-sessionexport --enable-dtls --enable-dtls13',
-          '--enable-sessionexport',
-          '--disable-examples CPPFLAGS=-DWOLFSSL_NO_MALLOC',
-          'CPPFLAGS=-DNO_WOLFSSL_CLIENT',
-          'CPPFLAGS=-DNO_WOLFSSL_SERVER',
-          'CPPFLAGS=-DWOLFSSL_NO_CLIENT_AUTH',
-          'CPPFLAGS=''-DNO_WOLFSSL_CLIENT -DWOLFSSL_NO_CLIENT_AUTH''',
-          'CPPFLAGS=''-DNO_WOLFSSL_SERVER -DWOLFSSL_NO_CLIENT_AUTH''',
-          '--enable-all CPPFLAGS=-DNO_WOLFSSL_CLIENT',
-          '--enable-all CPPFLAGS=-DNO_WOLFSSL_SERVER',
-          '--enable-all CPPFLAGS=-DWOLFSSL_NO_CLIENT_AUTH',
-          '--enable-all CPPFLAGS=''-DNO_WOLFSSL_CLIENT -DWOLFSSL_NO_CLIENT_AUTH''',
-          '--enable-all CPPFLAGS=''-DNO_WOLFSSL_SERVER -DWOLFSSL_NO_CLIENT_AUTH''',
         ]
     name: make check
-    if: github.repository_owner == 'wolfssl'
     runs-on: ${{ matrix.os }}
     # This should be a safe limit for the tests to run.
     timeout-minutes: 14
@@ -91,20 +42,19 @@ jobs:
       - name: Build and test wolfSSL
         uses: wolfSSL/actions-build-autotools-project@v1
         with:
-          configure: CFLAGS="-pedantic -Wno-overlength-strings -Wdeclaration-after-statement -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE" ${{ matrix.config }}
+          configure: ${{ matrix.config }}
           check: true
 
   make_user_settings:
     strategy:
       fail-fast: false
       matrix:
-        os: [ ubuntu-24.04, macos-latest ]
+        os: [ ubuntu-latest, macos-latest ]
         user-settings: [
           # Add new user_settings.h here
           'examples/configs/user_settings_all.h',
         ]
     name: make user_setting.h
-    if: github.repository_owner == 'wolfssl'
     runs-on: ${{ matrix.os }}
     # This should be a safe limit for the tests to run.
     timeout-minutes: 14
@@ -120,29 +70,15 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        os: [ ubuntu-24.04, macos-latest ]
+        os: [ ubuntu-latest, macos-latest ]
         user-settings: [
-          # Add new user_settings.h here (alphabetical order)
+          # Add new user_settings.h here
-          'examples/configs/user_settings_ca.h',
-          'examples/configs/user_settings_dtls13.h',
-          'examples/configs/user_settings_EBSnet.h',
-          'examples/configs/user_settings_eccnonblock.h',
           'examples/configs/user_settings_min_ecc.h',
-          'examples/configs/user_settings_openssl_compat.h',
-          'examples/configs/user_settings_pkcs7.h',
-          'examples/configs/user_settings_rsa_only.h',
-          'examples/configs/user_settings_template.h',
-          'examples/configs/user_settings_tls12.h',
-          'examples/configs/user_settings_tls13.h',
           'examples/configs/user_settings_wolfboot_keytools.h',
-          'examples/configs/user_settings_wolfssh.h',
           'examples/configs/user_settings_wolftpm.h',
-          # Not included (require special setup):
+          'examples/configs/user_settings_tls12.h',
-          # - user_settings_pq.h: Requires --enable-experimental
-          # - user_settings_baremetal.h: Requires static memory, custom platform
         ]
     name: make user_setting.h (testwolfcrypt only)
-    if: github.repository_owner == 'wolfssl'
     runs-on: ${{ matrix.os }}
     # This should be a safe limit for the tests to run.
     timeout-minutes: 14
@@ -162,9 +98,8 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        os: [ ubuntu-24.04, macos-latest ]
+        os: [ ubuntu-latest, macos-latest ]
     name: make user_setting.h (with sed)
-    if: github.repository_owner == 'wolfssl'
     runs-on: ${{ matrix.os }}
     # This should be a safe limit for the tests to run.
     timeout-minutes: 14
@@ -183,12 +118,7 @@ jobs:
 
   windows_build:
     name: Windows Build Test
-    if: github.repository_owner == 'wolfssl'
     runs-on: windows-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        arch: [ x64, Win32, ARM64 ]
     # This should be a safe limit for the tests to run.
     timeout-minutes: 6
     env:
@@ -199,6 +129,7 @@ jobs:
       # You can convert this to a build matrix if you need coverage of multiple configuration types.
       # https://docs.github.com/actions/learn-github-actions/managing-complex-workflows#using-a-build-matrix
       BUILD_CONFIGURATION: Release
+      BUILD_PLATFORM: x64
     steps:
     - uses: actions/checkout@v4
 
@@ -213,9 +144,8 @@ jobs:
       working-directory: ${{env.GITHUB_WORKSPACE}}
       # Add additional options to the MSBuild command line here (like platform or verbosity level).
       # See https://docs.microsoft.com/visualstudio/msbuild/msbuild-command-line-reference
-      run: msbuild /m /p:PlatformToolset=v142 /p:Platform=${{matrix.arch}} /p:Configuration=${{env.BUILD_CONFIGURATION}} ${{env.SOLUTION_FILE_PATH}}
+      run: msbuild /m /p:PlatformToolset=v142 /p:Platform=${{env.BUILD_PLATFORM}} /p:Configuration=${{env.BUILD_CONFIGURATION}} ${{env.SOLUTION_FILE_PATH}}
 
-    - if: ${{ matrix.arch != 'ARM64' }}
+    - name: Run Test
-      name: Run Test
       working-directory: ${{env.GITHUB_WORKSPACE}}
-      run: Release/${{matrix.arch}}/testsuite.exe
+      run: Release/x64/testsuite.exe

.github/workflows/packaging.yml

@@ -15,8 +15,7 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Package wolfSSL
-    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
-    runs-on: ubuntu-24.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 10
     steps:
@@ -38,20 +37,18 @@ jobs:
       - name: Build wolfSSL .deb
         run: make deb-docker
 
-# disabled 20240919 -- broken target.
+      - name: Build wolfSSL .rpm
-#      - name: Build wolfSSL .rpm
+        run: make rpm-docker
-#        run: make rpm-docker
 
       - name: Confirm packages built
         run: |
           DEB_COUNT=$(find -name 'libwolfssl*.deb' | wc -l)
-          if [ "$DEB_COUNT" != "3" ]; then
+          if [ "$DEB_COUNT" != "2" ]; then
-            echo Did not find exactly three deb packages!!!
+            echo Did not find exactly two deb packages!!!
+            exit 1
+          fi
+          RPM_COUNT=$(find -name 'wolfssl*.rpm' | wc -l)
+          if [ "$RPM_COUNT" != "4" ]; then
+            echo Did not find exactly four rpm packages!!!
             exit 1
           fi
-# disabled 20240919 -- broken target.
-#          RPM_COUNT=$(find -name 'wolfssl*.rpm' | wc -l)
-#          if [ "$RPM_COUNT" != "4" ]; then
-#            echo Did not find exactly four rpm packages!!!
-#            exit 1
-#          fi

.github/workflows/pam-ipmi.yml

@@ -1,92 +0,0 @@
-name: pam-ipmi Tests
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-
-jobs:
-  build_wolfssl:
-    name: Build wolfSSL
-    if: github.repository_owner == 'wolfssl'
-    # Just to keep it the same as the testing target
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 4
-    steps:
-      - name: Build wolfSSL
-        uses: wolfSSL/actions-build-autotools-project@v1
-        with:
-          path: wolfssl
-          configure: --enable-all
-          install: true
-          # Don't run tests as this config is tested in many other places
-          check: false
-
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
-      - name: Upload built lib
-        uses: actions/upload-artifact@v4
-        with:
-          name: wolf-install-pam-ipmi
-          path: build-dir.tgz
-          retention-days: 5
-
-  build_pam-ipmi:
-    strategy:
-      fail-fast: false
-      matrix:
-        git_ref: [ e4b13e6725abb178f62ee897fe1c0e81b06a9431 ]
-    name: ${{ matrix.git_ref }}
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    needs: build_wolfssl
-    steps:
-      - name: Install dependencies
-        run: |
-          # Don't prompt for anything
-          export DEBIAN_FRONTEND=noninteractive
-          sudo apt-get update
-          sudo apt-get install libpam-dev ninja-build meson
-
-      - name: Download lib
-        uses: actions/download-artifact@v4
-        with:
-          name: wolf-install-pam-ipmi
-
-      - name: untar build-dir
-        run: tar -xf build-dir.tgz
-
-      - name: Checkout OSP
-        uses: actions/checkout@v4
-        with:
-          repository: wolfssl/osp
-          path: osp
-
-      - name: Checkout pam-ipmi
-        uses: actions/checkout@v4
-        with:
-          repository: openbmc/pam-ipmi
-          path: pam-ipmi
-          ref: ${{ matrix.git_ref }}
-
-      - name: Build pam-ipmi
-        working-directory: pam-ipmi
-        run: |
-          patch -p1 < ../osp/pam-ipmi/*-${{ matrix.git_ref }}.patch
-          PKG_CONFIG_PATH=$GITHUB_WORKSPACE/build-dir/lib/pkgconfig meson setup build
-          ninja -C build
-
-      - name: Confirm built with wolfSSL
-        working-directory: pam-ipmi
-        run: |
-          ldd ./build/src/pam_ipmisave/pam_ipmisave.so | grep wolfssl

.github/workflows/pq-all.yml

@@ -1,57 +0,0 @@
-name: Quantum Resistant Tests
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  make_check:
-    strategy:
-      matrix:
-        config: [
-          # Add new configs here
-          '--enable-intelasm --enable-sp-asm --enable-mlkem=yes,kyber,ml-kem CPPFLAGS="-DWOLFSSL_ML_KEM_USE_OLD_IDS"',
-          '--enable-intelasm --enable-sp-asm --enable-all --enable-testcert --enable-acert --enable-dtls13 --enable-dtls-mtu --enable-dtls-frag-ch --enable-dtlscid --enable-quic --with-sys-crypto-policy --enable-experimental --enable-mlkem=yes,kyber,ml-kem --enable-lms --enable-xmss --enable-dilithium --enable-dual-alg-certs --disable-qt CPPFLAGS="-pedantic -Wdeclaration-after-statement -DWOLFCRYPT_TEST_LINT -DNO_WOLFSSL_CIPHER_SUITE_TEST -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE"',
-          '--enable-smallstack --enable-smallstackcache --enable-intelasm --enable-sp-asm --enable-all --enable-testcert --enable-acert --enable-dtls13 --enable-dtls-mtu --enable-dtls-frag-ch --enable-dtlscid --enable-quic --with-sys-crypto-policy --enable-experimental --enable-mlkem=yes,kyber,ml-kem --enable-lms --enable-xmss --enable-dilithium --enable-dual-alg-certs --disable-qt CPPFLAGS="-pedantic -Wdeclaration-after-statement -DWOLFCRYPT_TEST_LINT -DNO_WOLFSSL_CIPHER_SUITE_TEST -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE"',
-          '--enable-intelasm --enable-sp-asm --enable-all --enable-testcert --enable-acert --enable-dtls13 --enable-dtls-mtu --enable-dtls-frag-ch --enable-dtlscid --enable-quic --with-sys-crypto-policy --enable-experimental --enable-mlkem=yes,kyber,ml-kem --enable-lms --enable-xmss --enable-dilithium --enable-dual-alg-certs --disable-qt CPPFLAGS="-Wdeclaration-after-statement -DWOLFCRYPT_TEST_LINT -DNO_WOLFSSL_CIPHER_SUITE_TEST -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE" CC=c++',
-          '--enable-intelasm --enable-sp-asm --enable-all --enable-testcert --enable-acert --enable-dtls13 --enable-dtls-mtu --enable-dtls-frag-ch --enable-dtlscid --enable-quic --with-sys-crypto-policy --enable-experimental --enable-mlkem=yes,kyber,ml-kem --enable-lms --enable-xmss --enable-dilithium --disable-qt CPPFLAGS="-pedantic -Wdeclaration-after-statement -DWOLFCRYPT_TEST_LINT -DNO_WOLFSSL_CIPHER_SUITE_TEST -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE -DWOLFSSL_BLIND_PRIVATE_KEY"',
-          '--enable-intelasm --enable-sp-asm --enable-all --enable-testcert --enable-acert --enable-dtls13 --enable-dtls-mtu --enable-dtls-frag-ch --enable-dtlscid --enable-quic --with-sys-crypto-policy --enable-experimental --enable-mlkem=yes,kyber,ml-kem --enable-lms --enable-xmss --enable-dilithium --enable-dual-alg-certs --disable-qt CPPFLAGS="-pedantic -Wdeclaration-after-statement -DWOLFCRYPT_TEST_LINT -DNO_WOLFSSL_CIPHER_SUITE_TEST -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE -DWOLFSSL_BLIND_PRIVATE_KEY"',
-          '--enable-intelasm --enable-sp-asm --enable-all --enable-testcert --enable-acert --enable-dtls13 --enable-dtls-mtu --enable-dtls-frag-ch --enable-dtlscid --enable-quic --with-sys-crypto-policy --enable-experimental --enable-mlkem=yes,kyber,ml-kem --enable-lms --enable-xmss --enable-dilithium --enable-dual-alg-certs --disable-qt CPPFLAGS="-pedantic -Wdeclaration-after-statement -DWOLFCRYPT_TEST_LINT -DNO_WOLFSSL_CIPHER_SUITE_TEST -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE -DWOLFSSL_TLSX_PQC_MLKEM_STORE_OBJ"',
-          '--disable-intelasm --enable-all --enable-testcert --enable-acert --enable-dtls13 --enable-dtls-mtu --enable-dtls-frag-ch --enable-dtlscid --enable-quic --with-sys-crypto-policy --enable-experimental --enable-mlkem=yes,kyber,ml-kem,small --enable-lms=yes,small --enable-xmss=yes,small --enable-dilithium=yes,small --enable-dual-alg-certs --disable-qt CPPFLAGS="-pedantic -Wdeclaration-after-statement -DWOLFCRYPT_TEST_LINT -DNO_WOLFSSL_CIPHER_SUITE_TEST -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE -DWOLFSSL_MLKEM_MAKEKEY_SMALL_MEM -DWOLFSSL_MLKEM_ENCAPSULATE_SMALL_MEM -DWOLFSSL_MLKEM_NO_LARGE_CODE -DWOLFSSL_DILITHIUM_SIGN_SMALL_MEM -DWOLFSSL_DILITHIUM_VERIFY_SMALL_MEM -DWOLFSSL_DILITHIUM_MAKE_KEY_SMALL_MEM -DWOLFSSL_DILITHIUM_NO_LARGE_CODE"',
-          '--disable-intelasm --enable-smallstack --enable-smallstackcache --enable-all --enable-testcert --enable-acert --enable-dtls13 --enable-dtls-mtu --enable-dtls-frag-ch --enable-dtlscid --enable-quic --with-sys-crypto-policy --enable-experimental --enable-mlkem=yes,kyber,ml-kem,small --enable-lms=yes,small --enable-xmss=yes,small --enable-dilithium=yes,small --enable-dual-alg-certs --disable-qt CPPFLAGS="-pedantic -Wdeclaration-after-statement -DWOLFCRYPT_TEST_LINT -DNO_WOLFSSL_CIPHER_SUITE_TEST -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE -DWOLFSSL_MLKEM_MAKEKEY_SMALL_MEM -DWOLFSSL_MLKEM_ENCAPSULATE_SMALL_MEM -DWOLFSSL_MLKEM_NO_LARGE_CODE -DWOLFSSL_DILITHIUM_SIGN_SMALL_MEM -DWOLFSSL_DILITHIUM_VERIFY_SMALL_MEM -DWOLFSSL_DILITHIUM_MAKE_KEY_SMALL_MEM -DWOLFSSL_DILITHIUM_NO_LARGE_CODE"',
-        ]
-    name: make check
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 6
-    steps:
-      - uses: actions/checkout@v4
-        name: Checkout wolfSSL
-
-      - name: Test wolfSSL
-        run: |
-          ./autogen.sh
-          ./configure ${{ matrix.config }}
-          make -j 4
-          make check
-
-      - name: Print errors
-        if: ${{ failure() }}
-        run: |
-          for file in scripts/*.log
-          do
-              if [ -f "$file" ]; then
-                  echo "${file}:"
-                  cat "$file"
-                  echo "========================================================================"
-              fi
-          done

.github/workflows/psk.yml

@@ -1,51 +0,0 @@
-name: PSK Tests
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  make_check:
-    strategy:
-      matrix:
-        config: [
-          # Add new configs here
-          '--enable-psk C_EXTRA_FLAGS=-DWOLFSSL_STATIC_PSK --disable-rsa --disable-ecc --disable-dh',
-          '--disable-oldtls --disable-tls13 --enable-psk -disable-rsa --disable-dh -disable-ecc --disable-asn C_EXTRA_FLAGS=-DWOLFSSL_STATIC_PSK --enable-lowresource --enable-singlethreaded --disable-asm --disable-errorstrings --disable-pkcs12 --disable-sha3 --disable-sha224 --disable-sha384 --disable-sha512 --disable-sha --disable-md5 -disable-aescbc --disable-chacha --disable-poly1305 --disable-coding --disable-sp-math-all',
-          '--disable-oldtls --disable-tlsv12 --enable-tls13 --enable-psk -disable-rsa --disable-dh -disable-ecc --disable-asn C_EXTRA_FLAGS=-DWOLFSSL_STATIC_PSK --enable-lowresource --enable-singlethreaded --disable-asm --disable-errorstrings --disable-pkcs12 --disable-sha3 --disable-sha224 --disable-sha384 --disable-sha512 --disable-sha --disable-md5 -disable-aescbc --disable-chacha --disable-poly1305 --disable-coding --disable-sp-math-all'
-        ]
-    name: make check
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 6
-    steps:
-      - uses: actions/checkout@v4
-        name: Checkout wolfSSL
-
-      - name: Test wolfSSL
-        run: |
-          ./autogen.sh
-          ./configure ${{ matrix.config }}
-          make -j 4
-          make check
-
-      - name: Print errors
-        if: ${{ failure() }}
-        run: |
-          for file in scripts/*.log
-          do
-              if [ -f "$file" ]; then
-                  echo "${file}:"
-                  cat "$file"
-                  echo "========================================================================"
-              fi
-          done

.github/workflows/renode-stm32h753.yml

@@ -1,271 +0,0 @@
-name: Renode STM32H753 Test
-
-# Platform-specific configuration
-# To add a new platform, create a new workflow file based on this template
-# and update these variables for the target MCU
-env:
-  PLATFORM_NAME: stm32h753
-  PLATFORM_DISPLAY_NAME: STM32H753
-  CMSIS_DEVICE_REPO: cmsis-device-h7
-  CMSIS_DEVICE_PATH: /opt/cmsis-device-h7
-  CMSIS_DEVICE_CACHE_KEY: cmsis-device-h7-v1
-  STM32CUBE_REPO: STM32CubeH7
-  STM32CUBE_BRANCH: v1.11.2
-  STM32CUBE_PATH: /opt/STM32CubeH7
-  STM32CUBE_CACHE_KEY: stm32cubeh7-v1.11.2-v1
-  HAL_CONFIG_FILE: stm32h7xx_hal_conf.h
-  HAL_DRIVER_INC_PATH: STM32H7xx_HAL_Driver/Inc
-  HAL_DRIVER_SRC_PATH: STM32H7xx_HAL_Driver/Src
-  RENODE_PLATFORM_NAME: stm32h753
-  RENODE_REPL_PATH: platforms/cpus/stm32h753.repl
-  RENODE_TEST_DIR: .github/renode-test/stm32h753
-
-on:
-  push:
-    branches: [ main, master, develop ]
-  pull_request:
-    branches: [ main, master, develop ]
-  workflow_dispatch:
-
-jobs:
-  test:
-    runs-on: ubuntu-latest
-    timeout-minutes: 30
-
-    steps:
-    - name: Checkout wolfSSL
-      uses: actions/checkout@v4
-
-    - name: Set up build environment
-      run: |
-        sudo apt-get update
-        sudo apt-get install -y --no-install-recommends \
-          build-essential \
-          ca-certificates \
-          cmake \
-          ninja-build \
-          python3 \
-          git \
-          gcc-arm-none-eabi \
-          libnewlib-arm-none-eabi \
-          libstdc++-arm-none-eabi-newlib \
-          wget \
-          unzip
-
-    - name: Cache CMSIS Device
-      id: cache-cmsis-device
-      uses: actions/cache@v4
-      with:
-        path: ${{ env.CMSIS_DEVICE_PATH }}
-        key: ${{ env.CMSIS_DEVICE_CACHE_KEY }}
-        restore-keys: |
-          ${{ env.CMSIS_DEVICE_CACHE_KEY }}-
-
-    - name: Cache CMSIS 5
-      id: cache-cmsis-5
-      uses: actions/cache@v4
-      with:
-        path: /opt/CMSIS_5
-        key: cmsis-5-v1
-        restore-keys: |
-          cmsis-5-
-
-    - name: Cache STM32Cube
-      id: cache-stm32cube
-      uses: actions/cache@v4
-      with:
-        path: ${{ env.STM32CUBE_PATH }}
-        key: ${{ env.STM32CUBE_CACHE_KEY }}
-        restore-keys: |
-          ${{ env.STM32CUBE_CACHE_KEY }}-
-
-    - name: Cache Renode
-      id: cache-renode
-      uses: actions/cache@v4
-      with:
-        path: /opt/renode
-        key: renode-1.15.3-v1
-        restore-keys: |
-          renode-1.15.3-
-
-    - name: Install Renode dependencies
-      run: |
-        # Install Mono and other dependencies needed for Renode (always needed, even when cached)
-        sudo apt-get install -y --no-install-recommends \
-          mono-runtime \
-          libmono-cil-dev \
-          screen \
-          policykit-1 || true
-
-    - name: Install Renode (if not cached)
-      if: steps.cache-renode.outputs.cache-hit != 'true'
-      run: |
-        # Install Renode by extracting .deb (avoids GUI dependency issues for headless use)
-        cd /tmp
-        wget -q https://github.com/renode/renode/releases/download/v1.15.3/renode_1.15.3_amd64.deb
-        # Extract the .deb file
-        dpkg-deb -x renode_1.15.3_amd64.deb /tmp/renode-extract
-        # Copy Renode files to system locations
-        sudo mkdir -p /opt/renode
-        sudo cp -r /tmp/renode-extract/opt/renode/* /opt/renode/ || true
-        sudo cp -r /tmp/renode-extract/usr/* /usr/ || true
-        # Create symlink for easy access
-        if [ -f /opt/renode/renode ]; then
-          sudo ln -sf /opt/renode/renode /usr/local/bin/renode
-        elif [ -f /usr/bin/renode ]; then
-          echo "Renode already in PATH at /usr/bin/renode"
-        fi
-        # Cleanup
-        rm -rf /tmp/renode-extract renode_1.15.3_amd64.deb
-
-    - name: Setup Renode symlinks and permissions
-      run: |
-        # When Renode is cached, we need to recreate /usr/bin/renode wrapper script
-        # The /usr/bin/renode is a wrapper that checks Mono and calls /opt/renode/bin/Renode.exe
-        if [ -d /opt/renode ] && [ ! -x /usr/bin/renode ]; then
-          echo "Renode cached but /usr/bin/renode wrapper missing, recreating..."
-          # Create the wrapper script
-          sudo bash -c 'cat > /usr/bin/renode << '\''SCRIPT_EOF'\''
-        #!/bin/sh
-        MONOVERSION=5.20
-        REQUIRED_MAJOR=5
-        REQUIRED_MINOR=20
-
-        LAUNCHER=mono
-
-        if ! [ -x "$(command -v $LAUNCHER)" ]
-        then
-            echo "$LAUNCHER not found. Renode requires Mono $MONOVERSION or newer. Please refer to documentation for installation instructions. Exiting!"
-            exit 1
-        fi
-
-        # Check installed mono version
-        INSTALLED_MONO=`$LAUNCHER --version | head -n1 | cut -d'\'' '\'' -f5`
-        INSTALLED_MONO_MAJOR=`echo $INSTALLED_MONO | cut -d'\''.'\'' -f1`
-        INSTALLED_MONO_MINOR=`echo $INSTALLED_MONO | cut -d'\''.'\'' -f2`
-
-        if [ $INSTALLED_MONO_MAJOR -lt $REQUIRED_MAJOR ] || [ $INSTALLED_MONO_MAJOR -eq $REQUIRED_MAJOR -a $INSTALLED_MONO_MINOR -lt $REQUIRED_MINOR ]
-        then
-            echo "Wrong Mono version detected: $INSTALLED_MONO. Renode requires Mono $MONOVERSION or newer. Please refer to documentation for installation instructions. Exiting!"
-            exit 1
-        fi
-
-        exec $LAUNCHER $MONO_OPTIONS /opt/renode/bin/Renode.exe "$@"
-        SCRIPT_EOF'
-          sudo chmod +x /usr/bin/renode
-          echo "Created /usr/bin/renode wrapper script"
-        fi
-
-        # Also ensure /usr/local/bin/renode symlink exists
-        if [ -x /usr/bin/renode ] && [ ! -x /usr/local/bin/renode ]; then
-          sudo ln -sf /usr/bin/renode /usr/local/bin/renode
-          echo "Created symlink: /usr/local/bin/renode -> /usr/bin/renode"
-        fi
-
-    - name: Verify Renode installation
-      run: |
-        # Verify Renode is installed and accessible
-        RENODE_FOUND=false
-        RENODE_BIN=""
-
-        # Check various possible locations
-        for path in /opt/renode/renode /opt/renode/bin/renode /usr/local/bin/renode /usr/bin/renode; do
-          if [ -x "$path" ]; then
-            echo "Renode found at $path"
-            "$path" --version || true
-            RENODE_BIN="$path"
-            RENODE_FOUND=true
-            break
-          fi
-        done
-
-        if [ "$RENODE_FOUND" != "true" ]; then
-          echo "ERROR: Renode binary not found or not executable!"
-          echo "Searching for renode..."
-          find /opt /usr -name renode -type f 2>/dev/null | head -10 || true
-          echo "Checking /opt/renode contents:"
-          ls -la /opt/renode/ 2>/dev/null | head -10 || true
-          if [ -d /opt/renode ]; then
-            echo "Checking /opt/renode subdirectories:"
-            find /opt/renode -type f -name "*renode*" 2>/dev/null | head -10 || true
-          fi
-          exit 1
-        fi
-
-
-    - name: Clone CMSIS Device (if not cached)
-      if: steps.cache-cmsis-device.outputs.cache-hit != 'true'
-      run: |
-        sudo mkdir -p /opt
-        sudo git clone --depth 1 https://github.com/STMicroelectronics/${{ env.CMSIS_DEVICE_REPO }}.git ${{ env.CMSIS_DEVICE_PATH }}
-
-    - name: Clone CMSIS 5 (if not cached)
-      if: steps.cache-cmsis-5.outputs.cache-hit != 'true'
-      run: |
-        sudo mkdir -p /opt
-        sudo git clone --depth 1 https://github.com/ARM-software/CMSIS_5.git /opt/CMSIS_5
-
-    - name: Clone STM32Cube (if not cached)
-      if: steps.cache-stm32cube.outputs.cache-hit != 'true'
-      run: |
-        sudo mkdir -p /opt
-        sudo git clone --depth 1 --branch ${{ env.STM32CUBE_BRANCH }} --recurse-submodules https://github.com/STMicroelectronics/${{ env.STM32CUBE_REPO }}.git ${{ env.STM32CUBE_PATH }} || \
-          (sudo git clone --depth 1 --branch ${{ env.STM32CUBE_BRANCH }} https://github.com/STMicroelectronics/${{ env.STM32CUBE_REPO }}.git ${{ env.STM32CUBE_PATH }} && \
-           cd ${{ env.STM32CUBE_PATH }} && sudo git submodule update --init --recursive --depth 1)
-
-    - name: Setup firmware build directory and helper files
-      run: |
-        sudo mkdir -p /opt/firmware
-        # Copy helper files from repository
-        sudo cp -r ${{ github.workspace }}/${{ env.RENODE_TEST_DIR }}/* /opt/firmware/
-        # Copy HAL config to STM32Cube directory
-        sudo cp /opt/firmware/${{ env.HAL_CONFIG_FILE }} ${{ env.STM32CUBE_PATH }}/Drivers/${{ env.HAL_DRIVER_INC_PATH }}/ 2>/dev/null || true
-        sudo chmod +x /opt/firmware/entrypoint.sh
-        # Create .renode-root file so Renode can find platform files
-        # Try to find Renode installation directory and create .renode-root with proper permissions
-        if [ -d "/opt/renode/platforms" ]; then
-          echo "/opt/renode" | sudo tee /opt/firmware/.renode-root > /dev/null
-          sudo chmod 644 /opt/firmware/.renode-root
-        elif [ -d "/usr/lib/renode/platforms" ]; then
-          echo "/usr/lib/renode" | sudo tee /opt/firmware/.renode-root > /dev/null
-          sudo chmod 644 /opt/firmware/.renode-root
-        elif [ -d "/usr/share/renode/platforms" ]; then
-          echo "/usr/share/renode" | sudo tee /opt/firmware/.renode-root > /dev/null
-          sudo chmod 644 /opt/firmware/.renode-root
-        fi
-
-    - name: Build wolfSSL firmware (NOT CACHED - rebuilds on every run)
-      env:
-        WOLFSSL_ROOT: /opt/wolfssl
-      run: |
-        # Copy wolfSSL source (this is NOT cached - fresh checkout each time)
-        sudo cp -r ${{ github.workspace }} /opt/wolfssl
-        # Build with CMake
-        cd /opt/firmware
-        sudo cmake -G Ninja \
-          -DWOLFSSL_USER_SETTINGS=ON \
-          -DUSER_SETTINGS_FILE=/opt/firmware/user_settings.h \
-          -DCMAKE_TOOLCHAIN_FILE=/opt/firmware/toolchain-arm-none-eabi.cmake \
-          -DCMAKE_BUILD_TYPE=Release \
-          -DWOLFSSL_CRYPT_TESTS=OFF \
-          -DWOLFSSL_EXAMPLES=OFF \
-          -B /opt/firmware/build \
-          -S /opt/firmware
-        sudo cmake --build /opt/firmware/build
-        # Verify ELF file was created and copy it to expected location
-        if [ -f "/opt/firmware/build/wolfcrypt_test.elf" ]; then
-          sudo cp /opt/firmware/build/wolfcrypt_test.elf /opt/firmware/wolfcrypt_test.elf
-          echo "ELF file copied to /opt/firmware/wolfcrypt_test.elf"
-          ls -lh /opt/firmware/wolfcrypt_test.elf
-        else
-          echo "ERROR: ELF file not found at /opt/firmware/build/wolfcrypt_test.elf"
-          echo "Searching for ELF files..."
-          find /opt/firmware/build -name "*.elf" 2>/dev/null || true
-          exit 1
-        fi
-
-    - name: Run Renode test
-      run: |
-        # Ensure PATH includes standard binary locations for sudo
-        sudo env PATH="$PATH" /opt/firmware/entrypoint.sh
-

.github/workflows/rng-tools.yml

@@ -1,116 +0,0 @@
-name: rng-tools Tests
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  build_wolfssl:
-    name: Build wolfSSL
-    if: github.repository_owner == 'wolfssl'
-    # Just to keep it the same as the testing target
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 4
-    steps:
-      - name: Build wolfSSL
-        uses: wolfSSL/actions-build-autotools-project@v1
-        with:
-          path: wolfssl
-          configure: --enable-all
-          install: true
-          check: false
-
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
-      - name: Upload built lib
-        uses: actions/upload-artifact@v4
-        with:
-          name: wolf-install-rng-tools
-          path: build-dir.tgz
-          retention-days: 5
-
-  rng-tools_check:
-    strategy:
-      fail-fast: false
-      matrix:
-        # List of releases to test
-        ref: [ 6.16 ]
-    name: ${{ matrix.ref }}
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 4
-    needs: build_wolfssl
-    steps:
-      - name: Install dependencies
-        run: |
-          # Don't prompt for anything
-          export DEBIAN_FRONTEND=noninteractive
-          sudo apt-get update
-          sudo apt-get install -y libcurl4-openssl-dev libjansson-dev libp11-dev librtlsdr-dev libcap-dev
-
-      - name: Download lib
-        uses: actions/download-artifact@v4
-        with:
-          name: wolf-install-rng-tools
-
-      - name: untar build-dir
-        run: tar -xf build-dir.tgz
-
-      - name: Checkout OSP
-        uses: actions/checkout@v4
-        with:
-          repository: wolfssl/osp
-          path: osp
-
-      - name: Checkout jitterentropy-library
-        uses: actions/checkout@v4
-        with:
-          repository: smuellerDD/jitterentropy-library
-          path: jitterentropy-library
-          ref: v3.5.0
-
-      - name: Build jitterentropy-library
-        working-directory: jitterentropy-library
-        run: make -j
-
-      - name: Build rng-tools
-        uses: wolfSSL/actions-build-autotools-project@v1
-        with:
-          repository: nhorman/rng-tools
-          ref: v${{ matrix.ref }}
-          path: rng-tools
-          patch-file: $GITHUB_WORKSPACE/osp/rng-tools/${{ matrix.ref }}.patch
-          configure: --without-pkcs11 --enable-jitterentropy=$GITHUB_WORKSPACE/jitterentropy-library --with-wolfssl=$GITHUB_WORKSPACE/build-dir
-          check: false
-
-      - name: Testing rng-tools
-        id: testing
-        working-directory: rng-tools
-        run: |
-          # Retry up to five times
-          for i in {1..5}; do
-            TEST_RES=0
-            LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$GITHUB_WORKSPACE/build-dir/lib RNGD_JITTER_TIMEOUT=100 make check || TEST_RES=$?
-            if [ "$TEST_RES" -eq "0" ]; then
-               break
-            fi
-          done
-          if [ "$TEST_RES" -ne "0" ]; then
-            exit $TEST_RES
-          fi
-
-      - name: Print logs
-        if: ${{ failure() && steps.testing.outcome == 'failure' }}
-        working-directory: rng-tools/tests
-        run: cat test-suite.log

.github/workflows/rust-wrapper.yml

@@ -1,74 +0,0 @@
-name: Build Rust Wrapper
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  build_wolfssl:
-    name: Build wolfSSL Rust Wrapper
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ${{ matrix.os }}
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 10
-    steps:
-    - name: Build wolfSSL
-      uses: wolfSSL/actions-build-autotools-project@v1
-      with:
-        path: wolfssl
-        configure: ${{ matrix.config }}
-    - name: Build Rust Wrapper
-      working-directory: wolfssl
-      run: make -C wrapper/rust
-    - name: Run Rust Wrapper Tests
-      working-directory: wolfssl
-      run: make -C wrapper/rust test
-    strategy:
-      matrix:
-        os: [ ubuntu-24.04, ubuntu-24.04-arm ]
-        config: [
-          # Add new configs here
-          '',
-          '--enable-all',
-          '--enable-cryptonly --disable-examples',
-          '--enable-cryptonly --disable-examples --disable-aes --disable-aesgcm',
-          '--enable-cryptonly --disable-examples --disable-aescbc',
-          '--enable-cryptonly --disable-examples --disable-aeseax',
-          '--enable-cryptonly --disable-examples --disable-aesecb',
-          '--enable-cryptonly --disable-examples --disable-aesccm',
-          '--enable-cryptonly --disable-examples --disable-aescfb',
-          '--enable-cryptonly --disable-examples --disable-aesctr',
-          '--enable-cryptonly --disable-examples --disable-aescts',
-          '--enable-cryptonly --disable-examples --disable-aesgcm',
-          '--enable-cryptonly --disable-examples --disable-aesgcm-stream',
-          '--enable-cryptonly --disable-examples --disable-aesofb',
-          '--enable-cryptonly --disable-examples --disable-aesxts',
-          '--enable-cryptonly --disable-examples --disable-cmac',
-          '--enable-cryptonly --disable-examples --disable-dh',
-          '--enable-cryptonly --disable-examples --disable-ecc',
-          '--enable-cryptonly --disable-examples --disable-ed25519',
-          '--enable-cryptonly --disable-examples --disable-ed25519-stream',
-          '--enable-cryptonly --disable-examples --disable-ed448',
-          '--enable-cryptonly --disable-examples --disable-ed448-stream',
-          '--enable-cryptonly --disable-examples --disable-hkdf',
-          '--enable-cryptonly --disable-examples --disable-hmac',
-          '--enable-cryptonly --disable-examples --disable-rng',
-          '--enable-cryptonly --disable-examples --disable-rsa',
-          '--enable-cryptonly --disable-examples --disable-rsapss',
-          '--enable-cryptonly --disable-examples --disable-sha224',
-          '--enable-cryptonly --disable-examples --disable-sha3',
-          '--enable-cryptonly --disable-examples --disable-sha384',
-          '--enable-cryptonly --disable-examples --disable-sha512',
-          '--enable-cryptonly --disable-examples --disable-shake128',
-          '--enable-cryptonly --disable-examples --disable-shake256',
-          '--enable-cryptonly --disable-examples --disable-srtp-kdf',
-          '--enable-cryptonly --disable-examples --disable-x963kdf',
-        ]

.github/workflows/smallStackSize.yml

@@ -1,53 +0,0 @@
-name: Stack Size warnings
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  build_library:
-    strategy:
-      matrix:
-        config: [
-          # defaults, noasm
-          '--disable-asm',
-
-          # defaults + native PQ, no asm
-          '--disable-asm --enable-experimental --enable-kyber=yes,original --enable-lms --enable-xmss --enable-dilithium',
-
-          # all-crypto + native PQ, no asm
-          '--disable-asm --enable-all-crypto --enable-experimental --enable-kyber=yes,original --enable-lms --enable-xmss --enable-dilithium',
-
-          # defaults, intelasm + sp-asm
-          '--enable-intelasm --enable-sp-asm',
-
-          # defaults + native PQ, intelasm + sp-asm
-          '--enable-intelasm --enable-sp-asm --enable-experimental --enable-kyber=yes,original --enable-lms --enable-xmss --enable-dilithium',
-
-          # all-crypto + native PQ, intelasm + sp-asm
-          '--enable-intelasm --enable-sp-asm --enable-all-crypto --enable-experimental --enable-kyber=yes,original --enable-lms --enable-xmss --enable-dilithium'
-        ]
-    name: build library
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 6
-    steps:
-      - uses: actions/checkout@v4
-        name: Checkout wolfSSL
-
-      - name: Build wolfCrypt with smallstack and stack depth warnings, and run testwolfcrypt
-        run: |
-          ./autogen.sh || $(exit 2)
-          echo "running ./configure ... ${{ matrix.config }}"
-          ./configure --enable-cryptonly --disable-cryptocb --disable-testcert --enable-smallstack --enable-smallstackcache --enable-crypttests --disable-benchmark --disable-examples --with-max-rsa-bits=16384 --enable-stacksize=verbose CFLAGS="-Wframe-larger-than=2048 -Wstack-usage=4096 -DWOLFSSL_TEST_MAX_RELATIVE_STACK_BYTES=8192 -DTEST_ALWAYS_RUN_TO_END" ${{ matrix.config }} || $(exit 3)
-          make -j 4 || $(exit 4)
-          ./wolfcrypt/test/testwolfcrypt

.github/workflows/socat.yml

@@ -1,81 +0,0 @@
-name: socat Tests
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  build_wolfssl:
-    name: Build wolfSSL
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    timeout-minutes: 4
-    steps:
-      - name: Build wolfSSL
-        uses: wolfSSL/actions-build-autotools-project@v1
-        with:
-          path: wolfssl
-          configure: --enable-maxfragment --enable-opensslall --enable-opensslextra --enable-dtls --enable-oldtls --enable-tlsv10 --enable-ipv6 'CPPFLAGS=-DWOLFSSL_NO_DTLS_SIZE_CHECK -DOPENSSL_COMPATIBLE_DEFAULTS'
-          install: true
-
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
-      - name: Upload built lib
-        uses: actions/upload-artifact@v4
-        with:
-          name: wolf-install-socat
-          path: build-dir.tgz
-          retention-days: 5
-
-
-  socat_check:
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 30
-    needs: build_wolfssl
-    steps:
-      - name: Install prereqs
-        run:
-          sudo apt-get install build-essential autoconf libtool pkg-config clang libc++-dev
-
-      - name: Download lib
-        uses: actions/download-artifact@v4
-        with:
-          name: wolf-install-socat
-
-      - name: untar build-dir
-        run: tar -xf build-dir.tgz
-
-      - name: Download socat
-        run: curl -O http://www.dest-unreach.org/socat/download/socat-1.8.0.0.tar.gz && tar xvf socat-1.8.0.0.tar.gz
-
-      - name: Checkout OSP
-        uses: actions/checkout@v4
-        with:
-          repository: wolfssl/osp
-          path: osp
-
-      - name: Build socat
-        working-directory: ./socat-1.8.0.0
-        run: |
-          patch -p1 < ../osp/socat/1.8.0.0/socat-1.8.0.0.patch
-          autoreconf -vfi
-          ./configure --with-wolfssl=$GITHUB_WORKSPACE/build-dir --enable-default-ipv=4
-          make
-
-      - name: Run socat tests
-        working-directory: ./socat-1.8.0.0
-        run: |
-          export LD_LIBRARY_PATH=$GITHUB_WORKSPACE/build-dir/lib:$LD_LIBRARY_PATH
-          export SHELL=/bin/bash
-          SOCAT=$GITHUB_WORKSPACE/socat-1.8.0.0/socat ./test.sh -t 0.5 --expect-fail 36,64,146,214,216,217,309,310,386,399,402,403,459,460,467,468,475,478,492,528,530

.github/workflows/softhsm.yml

@@ -1,94 +0,0 @@
-name: SoftHSMv2 Tests
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  build_wolfssl:
-    name: Build wolfSSL
-    if: github.repository_owner == 'wolfssl'
-    # Just to keep it the same as the testing target
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 10
-    steps:
-      - name: Build wolfSSL
-        uses: wolfSSL/actions-build-autotools-project@v1
-        with:
-          path: wolfssl
-          configure: --enable-all CFLAGS=-DRSA_MIN_SIZE=1024
-          install: true
-          check: false
-
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
-      - name: Upload built lib
-        uses: actions/upload-artifact@v4
-        with:
-          name: wolf-install-softhsm
-          path: build-dir.tgz
-          retention-days: 5
-
-  softhsm_check:
-    strategy:
-      fail-fast: false
-      matrix:
-        # List of releases to test
-        ref: [ 2.6.1 ]
-    name: ${{ matrix.ref }}
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 20
-    needs: build_wolfssl
-    steps:
-      - name: Install dependencies
-        run: |
-          # Don't prompt for anything
-          export DEBIAN_FRONTEND=noninteractive
-          sudo apt-get update
-          sudo apt-get install -y libcppunit-dev
-
-      - name: Download lib
-        uses: actions/download-artifact@v4
-        with:
-          name: wolf-install-softhsm
-
-      - name: untar build-dir
-        run: tar -xf build-dir.tgz
-
-      - name: Checkout OSP
-        uses: actions/checkout@v4
-        with:
-          repository: wolfssl/osp
-          path: osp
-
-      - name: Checkout SoftHSMv2
-        uses: actions/checkout@v4
-        with:
-          repository: opendnssec/SoftHSMv2
-          path: softhsm
-          ref: ${{ matrix.ref }}
-
-      # Not using wolfSSL/actions-build-autotools-project@v1 because autogen.sh doesn't work
-      - name: Build softhsm
-        working-directory: softhsm
-        run: |
-          patch -p1 < $GITHUB_WORKSPACE/osp/softhsm/${{ matrix.ref }}.patch
-          autoreconf -if
-          ./configure --with-crypto-backend=wolfssl WOLFSSL_INSTALL_DIR=$GITHUB_WORKSPACE/build-dir
-          make -j
-
-      - name: Test softhsm
-        working-directory: softhsm
-        run: make -j check

.github/workflows/sssd.yml

@@ -1,99 +0,0 @@
-name: sssd Tests
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  build_wolfssl:
-    if: github.repository_owner == 'wolfssl'
-    name: Build wolfSSL
-    # Just to keep it the same as the testing target
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 4
-    steps:
-      - name: Build wolfSSL
-        uses: wolfSSL/actions-build-autotools-project@v1
-        with:
-          path: wolfssl
-          configure: --enable-all CFLAGS=-DWOLFSSL_NO_ASN_STRICT
-          install: true
-          check: false
-
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
-      - name: Upload built lib
-        uses: actions/upload-artifact@v4
-        with:
-          name: wolf-install-sssd
-          path: build-dir.tgz
-          retention-days: 5
-
-  sssd_check:
-    strategy:
-      fail-fast: false
-      matrix:
-        # List of releases to test
-        ref: [ 2.9.1 ]
-    name: ${{ matrix.ref }}
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    container:
-      image: quay.io/sssd/ci-client-devel:ubuntu-latest
-      env:
-        LD_LIBRARY_PATH: /usr/local/lib
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 20
-    needs: build_wolfssl
-    steps:
-      - name: Install dependencies
-        run: |
-          # Don't prompt for anything
-          export DEBIAN_FRONTEND=noninteractive
-          sudo apt-get update
-          sudo apt-get install -y build-essential autoconf libldb-dev libldb2 python3-ldb bc
-
-      - name: Setup env
-        run: |
-          ln -s samba-4.0/ldb.h /usr/include/ldb.h
-          ln -s samba-4.0/ldb_errors.h /usr/include/ldb_errors.h
-          ln -s samba-4.0/ldb_handlers.h /usr/include/ldb_handlers.h
-          ln -s samba-4.0/ldb_module.h /usr/include/ldb_module.h
-          ln -s samba-4.0/ldb_version.h /usr/include/ldb_version.h
-
-      - name: Download lib
-        uses: actions/download-artifact@v4
-        with:
-          name: wolf-install-sssd
-
-      - name: untar build-dir
-        run: tar -xf build-dir.tgz
-
-      - name: Checkout OSP
-        uses: actions/checkout@v4
-        with:
-          repository: wolfssl/osp
-          path: osp
-
-      - name: Build and test sssd
-        uses: wolfSSL/actions-build-autotools-project@v1
-        with:
-          repository: SSSD/sssd
-          ref: ${{ matrix.ref }}
-          path: sssd
-          patch-file: $GITHUB_WORKSPACE/osp/sssd/${{ matrix.ref }}.patch
-          configure: >-
-            --without-samba --without-nfsv4-idmapd-plugin --with-oidc-child=no
-            --without-manpages WOLFSSL_INSTALL_DIR=$GITHUB_WORKSPACE/build-dir
-          check: true
-

.github/workflows/stunnel.yml

@@ -15,9 +15,8 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
-    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
-    runs-on: ubuntu-24.04
+    runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     steps:
@@ -28,14 +27,11 @@ jobs:
           configure: --enable-stunnel
           install: true
 
-      - name: tar build-dir
-        run: tar -zcf build-dir.tgz build-dir
-
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-stunnel
-          path: build-dir.tgz
+          path: build-dir
           retention-days: 5
 
   stunnel_check:
@@ -45,8 +41,7 @@ jobs:
         # List of releases to test
         ref: [ 5.67 ]
     name: ${{ matrix.ref }}
-    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
-    runs-on: ubuntu-24.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     needs: build_wolfssl
@@ -55,9 +50,7 @@ jobs:
         uses: actions/download-artifact@v4
         with:
           name: wolf-install-stunnel
-
+          path: build-dir
-      - name: untar build-dir
-        run: tar -xf build-dir.tgz
     
       - name: Checkout OSP
         uses: actions/checkout@v4

.github/workflows/symbol-prefixes.yml

@@ -1,70 +0,0 @@
-name: WOLFSSL_API_PREFIX_MAP
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  make_and_analyze:
-    strategy:
-      matrix:
-        config: [
-          '--enable-all --enable-mlkem --enable-mldsa --enable-xmss --enable-lms --enable-acert --with-sys-crypto-policy CFLAGS=-DWOLFSSL_API_PREFIX_MAP'
-        ]
-    name: make and analyze
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 6
-    steps:
-      - uses: actions/checkout@v4
-        name: Checkout wolfSSL
-
-      - name: Test --enable-opensslcoexist and TEST_OPENSSL_COEXIST
-        run: |
-          ./autogen.sh || $(exit 2)
-          ./configure ${{ matrix.config }} || $(exit 3)
-          make -j 4 || $(exit 4)
-          # ignore properly prefixed symbols, and symbols associated with asm implementations (all internal) regardless of prefix:
-          readelf --symbols --wide src/.libs/libwolfssl.so | \
-          awk '
-          BEGIN {
-              total_public_symbols = 0;
-              unprefixed_public_symbols = 0;
-          }
-          {
-              if (($5 == "GLOBAL") && ($6 != "HIDDEN") && ($7 ~ /^[0-9]+$/)) {
-                  ++total_public_symbols;
-              }
-          }
-          {
-              if (($7 !~ /^[0-9]+$/) ||
-                  ($8 ~ /^(wc_|wolf|WOLF|__pfx|fe_|sp_[a-zA-Z090-0_]*[0-9])/) ||
-                  ($8 ~ /(_avx[12]|_AVX[12]|_sse[12]|_SSE[12]|_aesni|_AESNI|_bmi2|_x64$)/))
-              {
-                  next;
-              }
-          }
-          {
-              if (($4 == "FUNC") && ($5 == "GLOBAL") && ($6 == "DEFAULT")) {
-                  ++unprefixed_public_symbols;
-                  print;
-              }
-          }
-          END {
-              if (unprefixed_public_symbols) {
-                  print unprefixed_public_symbols " unprefixed public symbols found, of " total_public_symbols " total." >"/dev/stderr";
-                  exit(1);
-              } else {
-                  print total_public_symbols " public symbols found in libwolfssl, all OK.";
-                  exit(0);
-              }
-          }' || $(exit 5)

.github/workflows/threadx.yml

@@ -1,57 +0,0 @@
-name: ThreadXBuild Test
-
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-jobs:
-  build:
-
-    runs-on: ubuntu-24.04
-    timeout-minutes: 10
-
-    steps:
-    - name: Cache NetXDuo bundle
-      id: cache-netxduo
-      uses: actions/cache@v3
-      with:
-        path: ./v6.4.3_rel.tar.gz
-        key: netxduo-bundle-v6.4.3_rel
-
-    - name: Download NetXDuo bundle if not cached
-      if: steps.cache-netxduo.outputs.cache-hit != 'true'
-      run: |
-        wget https://github.com/eclipse-threadx/netxduo/archive/refs/tags/v6.4.3_rel.tar.gz
-
-    - name: Extract NetXDuo bundle
-      run: |
-        mkdir -p netxduo_src
-        tar -xzf v6.4.3_rel.tar.gz -C netxduo_src --strip-components=1
-
-    - name: Install NetXDuo Dependencies
-      working-directory: ./netxduo_src
-      run: |
-        ./scripts/install.sh
-
-    - name: Configure NetX with DNS Client Support
-      working-directory: ./netxduo_src
-      run: |
-        cp addons/dns/nxd_dns.h ./common/inc/
-        cp addons/dns/nxd_dns.c ./common/src/
-
-    - name: Build NetXDuo with DNS Support
-      working-directory: ./netxduo_src
-      run: |
-        rm -rf test/cmake/threadx
-        rm -rf test/cmake/filex
-        ./scripts/build_nxd64.sh
-
-    - name: Build wolfSSL
-      uses: wolfSSL/actions-build-autotools-project@v1
-      with:
-        path: wolfssl
-        configure: --enable-enckeys --disable-examples --disable-benchmark --disable-crypttests CPPFLAGS="-DTHREADX -DHAVE_NETX -DWOLFSSL_USER_IO -I${{ github.workspace }}/netxduo_src/common/inc -I${{ github.workspace }}/netxduo_src/ports/linux/gnu/inc -I${{ github.workspace }}/netxduo_src/test/cmake/netxduo64/build/libs/inc" LDFLAGS="-L${{ github.workspace }}/netxduo_src/test/cmake/netxduo64/build/default_build_coverage/netxduo -L${{ github.workspace }}/netxduo_src/test/cmake/netxduo64/build/libs/threadx"  LIBS="-lnetxduo -lthreadx"
-        install: false
-

.github/workflows/trackmemory.yml

@@ -1,60 +0,0 @@
-name: WOLFSSL_TRACK_MEMORY Tests
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  make_check:
-    strategy:
-      matrix:
-        config: [
-          # Add new configs here
-          '--enable-all CFLAGS="-DWC_RNG_SEED_CB -DWOLFSSL_TRACK_MEMORY -DWOLFSSL_DEBUG_MEMORY"',
-          '--enable-smallstack --enable-all CFLAGS="-DWC_RNG_SEED_CB  -DWOLFSSL_TRACK_MEMORY -DWOLFSSL_DEBUG_MEMORY"',
-          '--enable-smallstackcache --enable-smallstack --enable-all CFLAGS="-DWC_RNG_SEED_CB  -DWOLFSSL_TRACK_MEMORY -DWOLFSSL_DEBUG_MEMORY"',
-# Note the below smallstackcache tests are crucial coverage for the Linux kernel
-# module, when targeting a kernel with the randomness patch (linuxkm/patches/)
-# applied.
-#
-# Note, don't combine wolfEntropy with the full TLS cipher suite test -- the implicit wc_InitRng()s in each suite have an enormous CPU footprint.
-          '--enable-wolfEntropy --enable-smallstackcache --enable-smallstack --enable-all CFLAGS="-DWC_RNG_SEED_CB -DWOLFSSL_TRACK_MEMORY -DWOLFSSL_DEBUG_MEMORY -DNO_WOLFSSL_CIPHER_SUITE_TEST"',
-          '--enable-intelrdseed --enable-smallstackcache --enable-smallstack --enable-all CFLAGS="-DWC_RNG_SEED_CB -DWOLFSSL_TRACK_MEMORY -DWOLFSSL_DEBUG_MEMORY -DNO_WOLFSSL_CIPHER_SUITE_TEST"',
-          '--enable-amdrand --enable-smallstackcache --enable-smallstack --enable-all CFLAGS="-DWC_RNG_SEED_CB -DWOLFSSL_TRACK_MEMORY -DWOLFSSL_DEBUG_MEMORY -DNO_WOLFSSL_CIPHER_SUITE_TEST"',
-          '--disable-asm --enable-wolfEntropy --enable-smallstackcache --enable-smallstack --enable-all CFLAGS="-DWC_RNG_SEED_CB -DWOLFSSL_TRACK_MEMORY -DWOLFSSL_DEBUG_MEMORY -DNO_WOLFSSL_CIPHER_SUITE_TEST"'
-        ]
-    name: make check
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-latest
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 6
-    steps:
-      - uses: actions/checkout@v4
-        name: Checkout wolfSSL
-
-      - name: Test wolfSSL
-        run: |
-          ./autogen.sh
-          ./configure ${{ matrix.config }}
-          make -j 4
-          make check
-
-      - name: Print errors
-        if: ${{ failure() }}
-        run: |
-          for file in scripts/*.log
-          do
-              if [ -f "$file" ]; then
-                  echo "${file}:"
-                  cat "$file"
-                  echo "========================================================================"
-              fi
-          done

.github/workflows/watcomc.yml

@@ -1,88 +0,0 @@
-name: Build Watcom C
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  wolfssl_watcomc_windows:
-    if: github.repository_owner == 'wolfssl'
-    strategy:
-      fail-fast: false
-      matrix:
-        common:
-          - cmake:    '-G "Watcom WMake" -DCMAKE_VERBOSE_MAKEFILE=TRUE -DWOLFSSL_ASM=no -DWOLFSSL_EXAMPLES=no -DWOLFSSL_CRYPT_TESTS=no'
-        platform:
-          - title:   'Windows OW 2.0'
-            system:   'Windows'
-            image:    'windows-latest'
-            owimage:  '2.0'
-            id:       'win32ow20'
-            cmake:    '-DCMAKE_SYSTEM_NAME=Windows -DCMAKE_SYSTEM_PROCESSOR=x86'
-          - title:   'Linux OW 2.0'
-            system:   'Linux'
-            image:    'ubuntu-latest'
-            owimage:  '2.0'
-            id:       'linuxow20'
-            cmake:    '-DCMAKE_SYSTEM_NAME=Linux -DCMAKE_SYSTEM_PROCESSOR=x86'
-          - title:   'OS/2 OW 2.0'
-            system:   'OS2'
-            image:    'windows-latest'
-            owimage:  '2.0'
-            id:       'os2ow20'
-            cmake:    '-DCMAKE_SYSTEM_NAME=OS2 -DCMAKE_SYSTEM_PROCESSOR=x86'
-        thread:
-          - id:       'multi'
-            cmake:    ''
-            owcmake:  '-DCMAKE_POLICY_DEFAULT_CMP0136=NEW -DCMAKE_WATCOM_RUNTIME_LIBRARY=MultiThreaded'
-          - id:       'single'
-            cmake:    '-DWOLFSSL_SINGLE_THREADED=yes'
-            owcmake:  '-DCMAKE_POLICY_DEFAULT_CMP0136=NEW -DCMAKE_WATCOM_RUNTIME_LIBRARY=SingleThreaded'
-        library:
-          - id:       'dll'
-            cmake:    ''
-            owcmake:  'DLL'
-          - id:       'static'
-            cmake:    '-DBUILD_SHARED_LIBS=no'
-            owcmake:  ''
-        exclude:
-          - { platform: { system: 'Linux' }, library: { id: 'dll' } }
-    runs-on: ${{ matrix.platform.image }}
-    name: ${{ matrix.platform.title }} (${{ matrix.thread.id }} ${{ matrix.library.id }})
-    steps:
-      - name: Setup Open Watcom ${{ matrix.platform.owimage }}
-        uses: open-watcom/setup-watcom@v0
-        with:
-          version: ${{ matrix.platform.owimage }}
-          # Currently fixed to a monthly build because of historical instability with daily releases.
-          # See https://github.com/wolfSSL/wolfssl/pull/9167
-          # Pin to monthly release as needed:
-          tag: 2025-11-03-Build
-
-      - name: Checkout wolfSSL
-        uses: actions/checkout@v4
-        with:
-          path: wolfssl
-
-      - name: Build wolfSSL
-        working-directory: wolfssl
-        shell: bash
-        run: |
-          cmake -B build ${{matrix.common.cmake}} ${{ matrix.platform.cmake }} ${{ matrix.thread.cmake }} ${{ matrix.library.cmake }} ${{ matrix.thread.owcmake }}${{ matrix.library.owcmake }}
-          cmake --build build
-
-      - name: Upload build errors
-        if: failure()
-        uses: actions/upload-artifact@v4
-        with:
-          name: ${{ matrix.platform.id }}-${{ matrix.thread.id }}-${{ matrix.library.id }}
-          path: |
-            build/**

.github/workflows/win-csharp-test.yml

@@ -1,58 +0,0 @@
-name: Windows CSharp Build Test
-
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-jobs:
-  build:
-
-    if: github.repository_owner == 'wolfssl'
-    runs-on: windows-latest
-
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 6
-
-    env:
-      # Path to the solution file relative to the root of the project.
-      SOLUTION_FILE_PATH: wolfssl\wrapper\CSharp\wolfSSL_CSharp.sln
-
-      # Configuration type to build.
-      # You can convert this to a build matrix if you need coverage of multiple configuration types.
-      # https://docs.github.com/actions/learn-github-actions/managing-complex-workflows#using-a-build-matrix
-      BUILD_CONFIGURATION: Debug
-      BUILD_PLATFORM: x64
-
-    steps:
-        - name: Pull wolfssl
-          uses: actions/checkout@master
-          with:
-            repository: wolfssl/wolfssl
-            path: wolfssl
-
-        - name: Create FIPS stub files (autogen)
-          working-directory: wolfssl
-          run: |
-            echo $null >> wolfcrypt\src\fips.c
-            echo $null >> wolfcrypt\src\fips_test.c
-            echo $null >> wolfcrypt\src\wolfcrypt_first.c
-            echo $null >> wolfcrypt\src\wolfcrypt_last.c
-
-        - name: Add MSBuild to PATH
-          uses: microsoft/setup-msbuild@v1
-
-        - name: Build
-          working-directory: ${{env.GITHUB_WORKSPACE}}
-          # Add additional options to the MSBuild command line here (like platform or verbosity level).
-          # See https://docs.microsoft.com/visualstudio/msbuild/msbuild-command-line-reference
-          run: msbuild /m /p:PlatformToolset=v142 /p:Platform=${{env.BUILD_PLATFORM}} /p:Configuration=${{env.BUILD_CONFIGURATION}} ${{env.SOLUTION_FILE_PATH}}
-
-        - name: Run wolfCrypt test
-          working-directory: ${{env.GITHUB_WORKSPACE}}wolfssl\wrapper\CSharp\Debug\x64\
-          run: ./wolfCrypt-test.exe
-
-        - name: Run wolfSSL client/server example
-          working-directory: ${{env.GITHUB_WORKSPACE}}wolfssl\wrapper\CSharp\Debug\x64\
-          run: ./wolfSSL-TLS-Server.exe && sleep 1 & ./wolfSSL-TLS-Client.exe

.github/workflows/wolfCrypt-Wconversion.yml

@@ -1,48 +0,0 @@
-name: wolfCrypt conversion warnings
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  build_library:
-    strategy:
-      matrix:
-        config: [
-          # Add new configs here
-          '--disable-asm --enable-cryptonly --enable-all-crypto --disable-examples --disable-benchmark --disable-crypttests CPPFLAGS="-Wconversion -Warith-conversion -Wenum-conversion -Wfloat-conversion -Wsign-conversion"',
-          '--enable-intelasm --enable-cryptonly --enable-all-crypto --disable-examples --disable-benchmark --disable-crypttests CPPFLAGS="-Wconversion -Warith-conversion -Wenum-conversion -Wfloat-conversion -Wsign-conversion"',
-          '--enable-smallstack --disable-asm --enable-cryptonly --enable-all-crypto --disable-examples --disable-benchmark --disable-crypttests CPPFLAGS="-Wconversion -Warith-conversion -Wenum-conversion -Wfloat-conversion -Wsign-conversion"',
-          '--enable-smallstack --enable-intelasm --enable-cryptonly --enable-all-crypto --disable-examples --disable-benchmark --disable-crypttests CPPFLAGS="-Wconversion -Warith-conversion -Wenum-conversion -Wfloat-conversion -Wsign-conversion"',
-          '--enable-cryptonly --enable-all-crypto --disable-examples --disable-benchmark --disable-crypttests CPPFLAGS="-Wconversion -Warith-conversion -Wenum-conversion -Wfloat-conversion -Wsign-conversion -DNO_INT128"',
-          '--enable-cryptonly --enable-all-crypto --disable-examples --disable-benchmark --disable-crypttests CPPFLAGS="-Wdeclaration-after-statement -Wconversion -Warith-conversion -Wenum-conversion -Wfloat-conversion -Wsign-conversion" --enable-32bit CFLAGS=-m32'
-        ]
-    name: build library
-    if: github.repository_owner == 'wolfssl'
-    runs-on: ubuntu-24.04
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 6
-    steps:
-      - uses: actions/checkout@v4
-        name: Checkout wolfSSL
-
-      - name: install_multilib
-        run: |
-          export DEBIAN_FRONTEND=noninteractive
-          sudo apt-get update
-          sudo apt-get install -y gcc-multilib
-
-      - name: Build wolfCrypt with extra type conversion warnings
-        run: |
-          ./autogen.sh || $(exit 2)
-          echo "running ./configure ${{ matrix.config }}"
-          ./configure ${{ matrix.config }} || $(exit 3)
-          make -j 4 || $(exit 4)

.github/workflows/xcode.yml

@@ -1,89 +0,0 @@
-name: Xcode Build Tests
-
-# START OF COMMON SECTION
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-# END OF COMMON SECTION
-
-jobs:
-  build:
-    if: github.repository_owner == 'wolfssl'
-    runs-on: macos-latest
-    # This should be a safe limit for the tests to run.
-    timeout-minutes: 10
-    strategy:
-      matrix:
-        include:
-          # macOS builds
-          - target: wolfssl_osx
-            arch: arm64
-            config: Release
-            sdk: macosx
-            name: macOS (ARM64, Release)
-          - target: wolfssl_osx
-            arch: x86_64
-            config: Release
-            sdk: macosx
-            name: macOS (x86_64, Release)
-          - target: wolfssl_osx
-            arch: arm64
-            config: Debug
-            sdk: macosx
-            name: macOS (ARM64, Debug)
-          - target: wolfssl_osx
-            arch: x86_64
-            config: Debug
-            sdk: macosx
-            name: macOS (x86_64, Debug)
-          # Universal build (both architectures)
-          - target: wolfssl_osx
-            arch: arm64
-            arch2: x86_64
-            config: Release
-            sdk: macosx
-            name: macOS (Universal, Release)
-            universal: true
-          # tvOS builds
-          - target: wolfssl_tvos
-            arch: arm64
-            config: Release
-            sdk: appletvos
-            name: tvOS (ARM64, Release)
-          - target: wolfssl_tvos
-            arch: arm64
-            config: Release
-            sdk: appletvsimulator
-            name: tvOS Simulator (ARM64, Release)
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build wolfSSL with Xcode (${{ matrix.name }})
-        working-directory: ./IDE/XCODE
-        run: |
-          if [ "${{ matrix.universal }}" == "true" ]; then
-            xcodebuild -project wolfssl.xcodeproj \
-                       -target ${{ matrix.target }} \
-                       -configuration ${{ matrix.config }} \
-                       -arch ${{ matrix.arch }} \
-                       -arch ${{ matrix.arch2 }} \
-                       -sdk ${{ matrix.sdk }} \
-                       SYMROOT=build \
-                       OBJROOT=build \
-                       build
-          else
-            xcodebuild -project wolfssl.xcodeproj \
-                       -target ${{ matrix.target }} \
-                       -configuration ${{ matrix.config }} \
-                       -arch ${{ matrix.arch }} \
-                       -sdk ${{ matrix.sdk }} \
-                       SYMROOT=build \
-                       OBJROOT=build \
-                       build
-          fi

.github/workflows/zephyr.yml

@@ -25,8 +25,7 @@ jobs:
             zephyr-sdk: 0.16.3
           - zephyr-ref: v2.7.4
             zephyr-sdk: 0.16.3
-    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
-    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 25
     steps:
@@ -42,18 +41,13 @@ jobs:
             make gcc gcc-multilib g++-multilib libsdl2-dev libmagic1 \
             autoconf automake bison build-essential ca-certificates cargo ccache chrpath cmake \
             cpio device-tree-compiler dfu-util diffstat dos2unix doxygen file flex g++ gawk gcc \
-            gcovr git git-core gnupg gperf gtk-sharp3 help2man iproute2 lcov libcairo2-dev \
+            gcovr git git-core gnupg gperf gtk-sharp2 help2man iproute2 lcov libcairo2-dev \
             libglib2.0-dev libgtk2.0-0 liblocale-gettext-perl libncurses5-dev libpcap-dev \
             libpopt0 libsdl1.2-dev libsdl2-dev libssl-dev libtool libtool-bin locales make \
             net-tools ninja-build openssh-client parallel pkg-config python3-dev python3-pip \
-            python3-ply python3-setuptools python-is-python3 qemu-kvm rsync socat srecord sudo \
+            python3-ply python3-setuptools python-is-python3 qemu rsync socat srecord sudo \
             texinfo unzip wget ovmf xz-utils
 
-      - name: Setup cmake version
-        uses: jwlawson/actions-setup-cmake@v2
-        with:
-          cmake-version: '3.25.x'
-
       - name: Install west
         run: sudo pip install west
 

.gitignore

@@ -3,13 +3,13 @@ ctaocrypt/src/src/
 *.lo
 *.la
 *.o
+*.patch
 *.deps
 *.d
 *.libs
 *.cache
 .dirstamp
 *.user
-!*-VS2022.vcxproj.user
 configure
 config.*
 !cmake/config.in
@@ -33,7 +33,7 @@ aclocal.m4
 aminclude.am
 lt*.m4
 Makefile.in
-/Makefile
+Makefile
 depcomp
 missing
 libtool
@@ -50,6 +50,16 @@ wolfcrypt_first.c
 wolfcrypt_last.c
 selftest.c
 fipsv2.c
+src/async.c
+wolfssl/async.h
+wolfcrypt/src/async.c
+wolfssl/wolfcrypt/async.h
+wolfcrypt/src/port/intel/quickassist.c
+wolfcrypt/src/port/intel/quickassist_mem.c
+wolfcrypt/src/port/cavium/cavium_nitrox.c
+wolfssl/wolfcrypt/port/intel/quickassist.h
+wolfssl/wolfcrypt/port/intel/quickassist_mem.h
+wolfssl/wolfcrypt/port/cavium/cavium_nitrox.h
 ctaocrypt/benchmark/benchmark
 ctaocrypt/test/testctaocrypt
 wolfcrypt/benchmark/benchmark
@@ -235,16 +245,6 @@ linuxkm/libwolfssl.mod.c
 linuxkm/libwolfssl.lds
 linuxkm/module_exports.c
 linuxkm/linuxkm/get_thread_size
-linuxkm/linuxkm
-linuxkm/src
-linuxkm/patches/src
-*.nds
-bsdkm/export_syms
-bsdkm/i386
-bsdkm/libwolfssl.ko
-bsdkm/machine
-bsdkm/opt_global.h
-bsdkm/x86
 
 # autotools generated
 scripts/unit.test
@@ -413,19 +413,6 @@ user_settings_asm.h
 /IDE/Espressif/**/sdkconfig
 /IDE/Espressif/**/sdkconfig.old
 
-# ESP8266 RTOS SDK has a slightly different sdkconfig filename to exclude:
-/IDE/Espressif/**/sdkconfig.debug
-/IDE/Espressif/**/sdkconfig.release
-/IDE/Espressif/**/sdkconfig-debug
-/IDE/Espressif/**/sdkconfig-release
-
-# Always include Espressif makefiles (typically only used for ESP8266)
-!/IDE/Espressif/**/Makefile
-!/IDE/Espressif/**/component.mk
-
-# Ignore all the example logs
-/IDE/Espressif/ESP-IDF/examples/**/logs/*
-
 # MPLAB
 /IDE/MPLABX16/wolfssl.X/dist/default/
 /IDE/MPLABX16/wolfssl.X/.generated_files
@@ -445,18 +432,8 @@ MagicCrypto
 # debian packaging
 debian/changelog
 debian/control
-debian/rules
 *.deb
 
-# Ada/Alire files
-wrapper/Ada/alire/
-wrapper/Ada/config/
-wrapper/Ada/lib/
-wrapper/Ada/obj/
-
-# Rust wrapper files
-/wrapper/rust/*/target/
-
 # PlatformIO
 /**/.pio
 /**/.vscode/.browse.c_cpp.db*
@@ -464,9 +441,3 @@ wrapper/Ada/obj/
 /**/.vscode/launch.json
 /**/.vscode/ipch
 /**/sdkconfig.esp32dev
-
-# Autogenerated debug trace headers
-wolfssl/debug-trace-error-codes.h
-wolfssl/debug-untrace-error-codes.h
-
-AGENTS.md

CMakeLists.txt

@@ -34,7 +34,7 @@ if("${CMAKE_SOURCE_DIR}" STREQUAL "${CMAKE_BINARY_DIR}")
      You must delete them, or cmake will refuse to work.")
 endif()
 
-project(wolfssl VERSION 5.8.4 LANGUAGES C ASM)
+project(wolfssl VERSION 5.7.0 LANGUAGES C ASM)
 
 # Set WOLFSSL_ROOT if not already defined
 if ("${WOLFSSL_ROOT}" STREQUAL "")
@@ -49,16 +49,16 @@ endif()
 
 # shared library versioning
 # increment if interfaces have been removed or changed
-set(WOLFSSL_LIBRARY_VERSION_FIRST 44)
+set(WOLFSSL_LIBRARY_VERSION_FIRST 42)
 
 # increment if interfaces have been added
 # set to zero if WOLFSSL_LIBRARY_VERSION_FIRST is incremented
-set(WOLFSSL_LIBRARY_VERSION_SECOND 0)
+set(WOLFSSL_LIBRARY_VERSION_SECOND 1)
 
 # increment if source code has changed
 # set to zero if WOLFSSL_LIBRARY_VERSION_FIRST is incremented or
 # WOLFSSL_LIBRARY_VERSION_SECOND is incremented
-set(WOLFSSL_LIBRARY_VERSION_THIRD 1)
+set(WOLFSSL_LIBRARY_VERSION_THIRD 0)
 
 set(LIBTOOL_FULL_VERSION ${WOLFSSL_LIBRARY_VERSION_FIRST}.${WOLFSSL_LIBRARY_VERSION_SECOND}.${WOLFSSL_LIBRARY_VERSION_THIRD})
 
@@ -66,9 +66,6 @@ set(WOLFSSL_DEFINITIONS)
 set(WOLFSSL_LINK_LIBS)
 set(WOLFSSL_INCLUDE_DIRS)
 
-# Initialize pkg-config private variables
-set(PC_LIBS_PRIVATE "")
-
 set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} "${CMAKE_CURRENT_SOURCE_DIR}/cmake/modules/")
 include(${CMAKE_CURRENT_SOURCE_DIR}/cmake/functions.cmake)
 
@@ -127,10 +124,6 @@ check_function_exists("memset" HAVE_MEMSET)
 check_function_exists("socket" HAVE_SOCKET)
 check_function_exists("strftime" HAVE_STRFTIME)
 check_function_exists("__atomic_fetch_add" HAVE_C___ATOMIC)
-check_function_exists("getpid" HAVE_GETPID)
-
-include(CheckSymbolExists)
-check_symbol_exists(isascii "ctype.h" HAVE_ISASCII)
 
 include(CheckTypeSize)
 
@@ -138,7 +131,6 @@ check_type_size("__uint128_t" __UINT128_T)
 check_type_size("long long" SIZEOF_LONG_LONG)
 check_type_size("long" SIZEOF_LONG)
 check_type_size("time_t" SIZEOF_TIME_T)
-check_type_size("uintptr_t" HAVE_UINTPTR_T)
 
 # By default, HAVE___UINT128_T gets defined as TRUE,
 # but we want it as 1.
@@ -160,14 +152,9 @@ endif()
 # Thread local storage
 include(CheckCSourceCompiles)
 
-if(CMAKE_C_COMPILER_ID STREQUAL "OpenWatcom")
+set(TLS_KEYWORDS "__thread" "__declspec(thread)")
-    if(CMAKE_SYSTEM_NAME STREQUAL "Windows")
+foreach(TLS_KEYWORD IN LISTS TLS_KEYWORDS)
-        list(APPEND WOLFSSL_DEFINITIONS "-DHAVE_THREAD_LS")
+    set(TLS_CODE "#include <stdlib.h>
-    endif()
-else()
-    set(TLS_KEYWORDS "__thread" "__declspec(thread)")
-    foreach(TLS_KEYWORD IN LISTS TLS_KEYWORDS)
-        set(TLS_CODE "#include <stdlib.h>
                   static void foo(void) {
                      static ${TLS_KEYWORD} int bar\;
                      exit(1)\;
@@ -176,22 +163,21 @@ else()
                   int main() {
                     return 0\;
                   }"
-        )
+    )
-        check_c_source_compiles(${TLS_CODE} THREAD_LS_ON)
+    check_c_source_compiles(${TLS_CODE} THREAD_LS_ON)
 
-        if(THREAD_LS_ON)
+    if(THREAD_LS_ON)
-            list(APPEND WOLFSSL_DEFINITIONS "-DHAVE_THREAD_LS")
+        list(APPEND WOLFSSL_DEFINITIONS "-DHAVE_THREAD_LS")
-            break()
+        break()
-        else()
+    else()
-            # THREAD_LS_ON is cached after each call to
+        # THREAD_LS_ON is cached after each call to
-            # check_c_source_compiles, and the function
+        # check_c_source_compiles, and the function
-            # won't run subsequent times if the variable
+        # won't run subsequent times if the variable
-            # is in the cache. To make it run again, we
+        # is in the cache. To make it run again, we
-            # need to remove the variable from the cache.
+        # need to remove the variable from the cache.
-            unset(THREAD_LS_ON CACHE)
+        unset(THREAD_LS_ON CACHE)
-        endif()
+    endif()
-    endforeach()
+endforeach()
-endif()
 
 # TODO: AX_PTHREAD does a lot. Need to implement the
 #       rest of its logic.
@@ -211,20 +197,13 @@ find_package(Threads)
 # Example for map file and custom linker script
 #set(CMAKE_EXE_LINKER_FLAGS " -Xlinker -Map=output.map -T\"${CMAKE_CURRENT_SOURCE_DIR}/linker.ld\"")
 
-message(STATUS "C Compiler ID: ${CMAKE_C_COMPILER_ID}")
-
 if(DEFINED WARNING_C_FLAGS)
-    set(CMAKE_C_FLAGS "${WARNING_C_FLAGS} ${CMAKE_C_FLAGS}")
+set(CMAKE_C_FLAGS "${WARNING_C_FLAGS} ${CMAKE_C_FLAGS}")
-endif()
-
-if(CMAKE_C_COMPILER_ID STREQUAL "OpenWatcom")
-    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -wx -wcd=202")
-    list(APPEND WOLFSSL_DEFINITIONS "-DWOLFSSL_HAVE_MIN -DWOLFSSL_HAVE_MAX -DNO_WRITEV")
 elseif(WIN32)
-    # Windows cl.exe does not support the -Wextra, -Wno-unused and -Werror flags.
+# Windows cl.exe does not support the -Wextra, -Wno-unused and -Werror flags.
-    set(CMAKE_C_FLAGS "-Wall ${CMAKE_C_FLAGS}")
+set(CMAKE_C_FLAGS "-Wall ${CMAKE_C_FLAGS}")
 else()
-    set(CMAKE_C_FLAGS "-Wall -Wextra -Wno-unused -Werror ${CMAKE_C_FLAGS}")
+set(CMAKE_C_FLAGS "-Wall -Wextra -Wno-unused -Werror ${CMAKE_C_FLAGS}")
 endif()
 
 ####################################################
@@ -284,28 +263,7 @@ add_option("WOLFSSL_DEBUG"
     "no" "yes;no")
 
 if(WOLFSSL_DEBUG)
-    # Optional variable inspection
+    set(CMAKE_C_FLAGS "-g ${CMAKE_C_FLAGS}")
-    if (0)
-        get_cmake_property(_variableNames VARIABLES)
-        list (SORT _variableNames)
-        message(STATUS "")
-        message(STATUS "ALL VARIABLES BEGIN")
-        message(STATUS "")
-        foreach (_variableName ${_variableNames})
-            message(STATUS "${_variableName}=${${_variableName}}")
-        endforeach()
-        message(STATUS "")
-        message(STATUS "ALL VARIABLES END")
-        message(STATUS "")
-    endif()
-
-    if (CMAKE_C_COMPILER_ID STREQUAL "Watcom" OR CMAKE_C_COMPILER_ID STREQUAL "OpenWatcom" OR CMAKE_GENERATOR STREQUAL "Watcom WMake")
-        # Open Watcom v2 does not support -g debugging
-        message(STATUS "Detected Watcom compiler, using CMAKE_C_FLAGS_DEBUG -d2")
-        set(CMAKE_C_FLAGS_DEBUG "-d2 ${CMAKE_C_FLAGS_DEBUG}")
-    else()
-        set(CMAKE_C_FLAGS "-g ${CMAKE_C_FLAGS}")
-    endif()
     list(APPEND WOLFSSL_DEFINITIONS
         "-DDEBUG_WOLFSSL"
         "-DDEBUG")
@@ -322,10 +280,10 @@ if(NOT WOLFSSL_SINGLE_THREADED)
     if(CMAKE_USE_PTHREADS_INIT)
         list(APPEND WOLFSSL_LINK_LIBS Threads::Threads)
         set(HAVE_PTHREAD 1)
-        list(APPEND WOLFSSL_DEFINITIONS "-DHAVE_PTHREAD")
+        list(APPEND WOLFSSL_DEFINITIONS
+            "-DHAVE_PTHREAD"
+            "-D_POSIX_THREADS")
     endif()
-else()
-    list(APPEND WOLFSSL_DEFINITIONS "-DSINGLE_THREADED")
 endif()
 
 # DTLS-SRTP
@@ -459,18 +417,16 @@ if(WOLFSSL_CURL)
     set(WOLFSSL_MD4 "yes")
     set(WOLFSSL_DES3 "yes")
     set(WOLFSSL_ALPN "yes")
-    set(WOLFSSL_EX_DATA "yes")
-    set(WOLFSSL_WOLFSSH "yes")
     set(WOLFSSL_OPENSSLEXTRA "yes")
     set(WOLFSSL_CRL "yes")
     set(WOLFSSL_OCSP "yes")
     set(WOLFSSL_OCSPSTAPLING "yes")
     set(WOLFSSL_OCSPSTAPLING_V2 "yes")
-    # Note: OCSP sets requisite HAVE_TLS_EXTENSIONS and HAVE_CERTIFICATE_STATUS_REQUEST(_V2)
     set(WOLFSSL_SNI "yes")
     set(WOLFSSL_ALT_CERT_CHAINS "yes")
     set(WOLFSSL_IP_ALT_NAME "yes")
     set(WOLFSSL_SESSION_TICKET "yes")
+    set(WOLFSSL_WOLFSSH "yes")
     list(APPEND WOLFSSL_DEFINITIONS
         "-DNO_SESSION_CACHE_REF" "-DWOLFSSL_DES_ECB")
 endif()
@@ -481,7 +437,7 @@ add_option(WOLFSSL_ALPN
     "no" "yes;no")
 
 if(WOLFSSL_ALPN)
-    list(APPEND WOLFSSL_DEFINITIONS "-DHAVE_ALPN" "-DHAVE_TLS_EXTENSIONS")
+        list(APPEND WOLFSSL_DEFINITIONS "-DHAVE_ALPN" "-DHAVE_TLS_EXTENSIONS")
 endif()
 
 # altcertchains
@@ -580,15 +536,6 @@ if (WOLFSSL_OPENSSLALL)
       "-DWOLFSSL_ERROR_CODE_OPENSSL" "-DWOLFSSL_CERT_NAME_ALL")
 endif()
 
-add_option(WOLFSSL_NO_STUB
-    "Removes OpenSSL compatibility stub functions (default: disabled)"
-    "no" "yes;no")
-
-if (WOLFSSL_NO_STUB)
-    list(APPEND WOLFSSL_DEFINITIONS
-      "-DNO_WOLFSSL_STUB")
-endif()
-
 # TODO: - IPv6 test apps
 
 set(WOLFSSL_SLOW_MATH "yes")
@@ -598,23 +545,9 @@ add_option(WOLFSSL_OQS
     "Enable integration with the OQS (Open Quantum Safe) liboqs library (default: disabled)"
     "no" "yes;no")
 
-# ML-KEM/Kyber
+# Kyber
-add_option(WOLFSSL_MLKEM
+add_option(WOLFSSL_KYBER
-    "Enable the wolfSSL PQ ML-KEM library (default: disabled)"
+    "Enable the wolfSSL PQ Kyber library (default: disabled)"
-    "no" "yes;no")
-
-# Dilithium
-add_option(WOLFSSL_DILITHIUM
-    "Enable the wolfSSL PQ Dilithium (ML-DSA) implementation (default: disabled)"
-    "no" "yes;no")
-
-# LMS
-add_option(WOLFSSL_LMS
-    "Enable the PQ LMS Stateful Hash-based Signature Scheme (default: disabled)"
-    "no" "yes;no")
-
-add_option(WOLFSSL_LMSSHA256192
-    "Enable the LMS SHA_256_192 truncated variant (default: disabled)"
     "no" "yes;no")
 
 # Experimental features
@@ -630,7 +563,7 @@ if (WOLFSSL_EXPERIMENTAL)
     # check if any experimental features are also enabled:
     set(WOLFSSL_FOUND_EXPERIMENTAL_FEATURE 0)
 
-    set_wolfssl_definitions("WOLFSSL_EXPERIMENTAL_SETTINGS" RESULT)
+    set_wolfssl_definitions("WOLFSSL_EXPERIMENTAL_SETTINGS" RESUlT)
 
     # Checking for experimental feature: OQS
     message(STATUS "Looking for WOLFSSL_OQS")
@@ -645,9 +578,9 @@ if (WOLFSSL_EXPERIMENTAL)
             list(APPEND WOLFSSL_LINK_LIBS ${OQS_LIBRARY})
             list(APPEND WOLFSSL_INCLUDE_DIRS ${OQS_INCLUDE_DIR})
 
-            set_wolfssl_definitions("HAVE_LIBOQS"          RESULT)
+            set_wolfssl_definitions("HAVE_LIBOQS"          RESUlT)
-            set_wolfssl_definitions("HAVE_TLS_EXTENSIONS"  RESULT)
+            set_wolfssl_definitions("HAVE_TLS_EXTENSIONS"  RESUlT)
-            set_wolfssl_definitions("OPENSSL_EXTRA"        RESULT)
+            set_wolfssl_definitions("OPENSSL_EXTRA"        RESUlT)
 
         else()
             message(STATUS "Checking OQS - not found")
@@ -657,75 +590,20 @@ if (WOLFSSL_EXPERIMENTAL)
         message(STATUS "Looking for WOLFSSL_OQS - not found")
     endif()
 
-    # Checking for experimental feature: WOLFSSL_MLKEM
+    # Checking for experimental feature: Kyber
-    message(STATUS "Looking for WOLFSSL_MLKEM")
+    message(STATUS "Looking for WOLFSSL_KYBER")
-    if (WOLFSSL_MLKEM)
+    if (WOLFSSL_KYBER)
         set(WOLFSSL_FOUND_EXPERIMENTAL_FEATURE 1)
 
-        message(STATUS "Automatically set related requirements for ML-KEM:")
+        message(STATUS "Automatically set related requirements for Kyber:")
-        add_definitions("-DWOLFSSL_HAVE_MLKEM")
+        set_wolfssl_definitions("WOLFSSL_HAVE_KYBER" RESUlT)
-        add_definitions("-DWOLFSSL_WC_MLKEM")
+        set_wolfssl_definitions("WOLFSSL_WC_KYBER"   RESUlT)
-        add_definitions("-DWOLFSSL_SHA3")
+        set_wolfssl_definitions("WOLFSSL_SHA3"       RESUlT)
-        add_definitions("-DWOLFSSL_SHAKE128")
+        set_wolfssl_definitions("WOLFSSL_SHAKE128"   RESUlT)
-        add_definitions("-DWOLFSSL_SHAKE256")
+        set_wolfssl_definitions("WOLFSSL_SHAKE256"   RESUlT)
-
+        message(STATUS "Looking for WOLFSSL_KYBER - found")
-        set_wolfssl_definitions("WOLFSSL_HAVE_MLKEM" RESULT)
-        set_wolfssl_definitions("WOLFSSL_WC_MLKEM"   RESULT)
-        set_wolfssl_definitions("WOLFSSL_SHA3"       RESULT)
-        set_wolfssl_definitions("WOLFSSL_SHAKE128"   RESULT)
-        set_wolfssl_definitions("WOLFSSL_SHAKE256"   RESULT)
-        message(STATUS "Looking for WOLFSSL_MLKEM - found")
     else()
-        message(STATUS "Looking for WOLFSSL_MLKEM - not found")
+        message(STATUS "Looking for WOLFSSL_KYBER - not found")
-    endif()
-
-    # Checking for experimental feature: WOLFSSL_LMS
-    message(STATUS "Looking for WOLFSSL_LMS")
-    if (WOLFSSL_LMS)
-        set(WOLFSSL_FOUND_EXPERIMENTAL_FEATURE 2)
-
-        message(STATUS "Automatically set related requirements for LMS")
-        add_definitions("-DWOLFSSL_HAVE_LMS")
-        add_definitions("-DWOLFSSL_WC_LMS")
-        set_wolfssl_definitions("WOLFSSL_HAVE_LMS" RESULT)
-        set_wolfssl_definitions("WOLFSSL_WC_LMS"   RESULT)
-        message(STATUS "Looking for WOLFSSL_LMS - found")
-        # Checking for experimental feature: WOLFSSL_LMSSHA256192
-        if (WOLFSSL_LMSSHA256192)
-            message(STATUS "Automatically set related requirements for LMS SHA256-192")
-            add_definitions("-DWOLFSSL_LMS_SHA256_192")
-            add_definitions("-DWOLFSSL_NO_LMS_SHA256_256")
-            set_wolfssl_definitions("WOLFSSL_LMS_SHA256_192"    RESULT)
-            set_wolfssl_definitions("WOLFSSL_NO_LMS_SHA256_256" RESULT)
-            message(STATUS "Looking for WOLFSSL_LMSSHA256192 - found")
-        else()
-            message(STATUS "Looking for WOLFSSL_LMSSHA256192 - not found")
-        endif()
-    else()
-        message(STATUS "Looking for WOLFSSL_LMS - not found")
-    endif()
-
-    # Checking for experimental feature: Dilithium
-    message(STATUS "Looking for WOLFSSL_DILITHIUM")
-    if (WOLFSSL_DILITHIUM)
-        set(WOLFSSL_FOUND_EXPERIMENTAL_FEATURE 1)
-
-        message(STATUS "Automatically set related requirements for Dilithium:")
-        add_definitions("-DHAVE_DILITHIUM")
-        add_definitions("-DWOLFSSL_WC_DILITHIUM")
-        add_definitions("-DWOLFSSL_SHA3")
-        add_definitions("-DWOLFSSL_SHAKE128")
-        add_definitions("-DWOLFSSL_SHAKE256")
-
-        message(STATUS "Automatically set related requirements for Dilithium:")
-        set_wolfssl_definitions("HAVE_DILITHIUM"       RESULT)
-        set_wolfssl_definitions("WOLFSSL_WC_DILITHIUM" RESULT)
-        set_wolfssl_definitions("WOLFSSL_SHA3"         RESULT)
-        set_wolfssl_definitions("WOLFSSL_SHAKE128"     RESULT)
-        set_wolfssl_definitions("WOLFSSL_SHAKE256"     RESULT)
-        message(STATUS "Looking for WOLFSSL_DILITHIUM - found")
-    else()
-        message(STATUS "Looking for WOLFSSL_DILITHIUM - not found")
     endif()
 
     # Other experimental feature detection can be added here...
@@ -738,36 +616,21 @@ if (WOLFSSL_EXPERIMENTAL)
     endif()
 
     # Sanity checks
-    if(WOLFSSL_OQS AND WOLFSSL_MLKEM)
+    if(WOLFSSL_OQS AND WOLFSSL_KYBER)
-        message(FATAL_ERROR "Error: cannot enable both WOLFSSL_OQS and WOLFSSL_MLKEM at the same time.")
+        message(FATAL_ERROR "Error: cannot enable both WOLFSSL_OQS and WOLFSSL_KYBER at the same time.")
-    endif()
-    if(WOLFSSL_OQS AND WOLFSSL_DILITHIUM)
-        message(FATAL_ERROR "Error: cannot enable both WOLFSSL_OQS and WOLFSSL_DILITHIUM at the same time.")
     endif()
+
 else()
     # Experimental mode not enabled, but were any experimental features enabled? Error out if so:
     message(STATUS "Looking for WOLFSSL_EXPERIMENTAL - not found")
     if (WOLFSSL_OQS)
         message(FATAL_ERROR "Error: WOLFSSL_OQS requires WOLFSSL_EXPERIMENTAL at this time.")
     endif()
-    if(WOLFSSL_MLKEM)
+    if(WOLFSSL_KYBER)
-        message(FATAL_ERROR "Error: WOLFSSL_MLKEM requires WOLFSSL_EXPERIMENTAL at this time.")
+        message(FATAL_ERROR "Error: WOLFSSL_KYBER requires WOLFSSL_EXPERIMENTAL at this time.")
-    endif()
-    if(WOLFSSL_DILITHIUM)
-        message(FATAL_ERROR "Error: WOLFSSL_DILITHIUM requires WOLFSSL_EXPERIMENTAL at this time.")
     endif()
 endif()
 
-# LMS
-add_option(WOLFSSL_LMS
-    "Enable the wolfSSL LMS implementation (default: disabled)"
-    "no" "yes;no")
-
-# XMSS
-add_option(WOLFSSL_XMSS
-    "Enable the wolfSSL XMSS implementation (default: disabled)"
-    "no" "yes;no")
-
 # TODO: - Lean PSK
 #       - Lean TLS
 #       - Low resource
@@ -781,6 +644,8 @@ add_option(WOLFSSL_XMSS
 #       - Atomic user record layer
 #       - Public key callbacks
 #       - Microchip/Atmel CryptoAuthLib
+#       - XMSS
+#       - LMS
 #       - dual-certs
 
 # AES-CBC
@@ -855,8 +720,7 @@ add_option("WOLFSSL_AESCTR"
 
 if(WOLFSSL_OPENVPN OR
    WOLFSSL_LIBSSH2 OR
-   WOLFSSL_AESSIV OR
+   WOLFSSL_AESSIV)
-   WOLFSSL_CLU)
     override_cache(WOLFSSL_AESCTR "yes")
 endif()
 
@@ -996,7 +860,7 @@ endif()
 #       - SEP
 
 add_option("WOLFSSL_KEYGEN"
-    "Enable key generation (default: disabled)"
+    "Enable key generation (default: disabled)])"
     "no" "yes;no")
 
 add_option("WOLFSSL_CERTGEN"
@@ -1070,64 +934,13 @@ if(WOLFSSL_ECC)
     endif()
 endif()
 
-# ECCSI
+# TODO: - ECC custom curves
-add_option("WOLFSSL_ECCSI"
+#       - Compressed key
-    "Enable ECCSI (default: disabled)"
-    "no" "yes;no")
-
-if(WOLFSSL_ECCSI)
-    if (NOT WOLFSSL_ECC)
-        message(FATAL_ERROR "cannot enable ECCSI without enabling ECC.")
-    endif()
-
-    list(APPEND WOLFSSL_DEFINITIONS "-DWOLFCRYPT_HAVE_ECCSI -DWOLFSSL_PUBLIC_MP")
-endif()
-
-# SAKKE
-add_option("WOLFSSL_SAKKE"
-    "Enable SAKKE (default: disabled)"
-    "no" "yes;no")
-
-if(WOLFSSL_SAKKE)
-    if (NOT WOLFSSL_ECC)
-        message(FATAL_ERROR "cannot enable SAKKE without enabling ECC.")
-    endif()
-
-    list(APPEND WOLFSSL_DEFINITIONS "-DWOLFCRYPT_HAVE_SAKKE")
-endif()
-
-# SipHash
-add_option("WOLFSSL_SIPHASH"
-    "Enable SipHash (default: disabled)"
-    "no" "yes;no")
-
-if(WOLFSSL_SIPHASH)
-    list(APPEND WOLFSSL_DEFINITIONS "-DWOLFSSL_SIPHASH")
-endif()
-
-# TODO: - Compressed key
 #       - FP ECC, fixed point cache ECC
 #       - ECC encrypt
 #       - PSK
 #       - Single PSK identity
 
-# ECC custom curves
-add_option("WOLFSSL_ECCCUSTCURVES"
-    "Enable ECC Custom Curves (default: disabled)"
-    "no" "yes;no;all")
-
-if(WOLFSSL_ECCCUSTCURVES)
-    if("${WOLFSSL_ECCCUSTCURVES}" STREQUAL "all")
-        list(APPEND WOLFSSL_DEFINITIONS "-DHAVE_ECC_SECPR2")
-        list(APPEND WOLFSSL_DEFINITIONS "-DHAVE_ECC_SECPR3")
-        list(APPEND WOLFSSL_DEFINITIONS "-DHAVE_ECC_BRAINPOOL")
-        list(APPEND WOLFSSL_DEFINITIONS "-DHAVE_ECC_KOBLITZ")
-        list(APPEND WOLFSSL_DEFINITIONS "-DHAVE_ECC_CDH")
-    endif()
-
-    list(APPEND WOLFSSL_DEFINITIONS "-DWOLFSSL_CUSTOM_CURVES")
-endif()
-
 # CURVE25519
 set(WOLFSSL_CURVE25519_SMALL "no")
 add_option("WOLFSSL_CURVE25519"
@@ -1158,7 +971,7 @@ add_option("WOLFSSL_ED25519"
     "Enable ED25519 (default: disabled)"
     "no" "yes;no")
 
-if(WOLFSSL_OPENSSH OR WOLFSSL_CLU)
+if(WOLFSSL_OPENSSH)
     override_cache(WOLFSSL_ED25519 "yes")
 endif()
 
@@ -1249,8 +1062,8 @@ endif()
 
 # Old TLS
 add_option("WOLFSSL_OLD_TLS"
-    "Enable old TLS versions < 1.2 (default: disabled)"
+    "Enable old TLS versions < 1.2 (default: enabled)"
-    "no" "yes;no")
+    "yes" "yes;no")
 
 if(NOT WOLFSSL_OLD_TLS)
     list(APPEND WOLFSSL_DEFINITIONS "-DNO_OLD_TLS")
@@ -1288,7 +1101,8 @@ if(NOT WOLFSSL_MEMORY)
 else()
     # turn off memory cb if leanpsk or leantls on
     if(WOLFSSL_LEAN_PSK OR WOLFSSL_LEAN_TLS)
-        list(APPEND WOLFSSL_DEFINITIONS "-DNO_WOLFSSL_MEMORY")
+        # but don't turn on NO_WOLFSSL_MEMORY because using own
+        override_cache(WOLFSSL_MEMORY "no")
     endif()
 endif()
 
@@ -1501,25 +1315,17 @@ if(WOLFSSL_OPENSSH OR WOLFSSL_WPAS)
 endif()
 
 # MD5
-set(WOLFSSL_MD5_HELP_STRING "Enable MD5 (default: disabled)")
+set(WOLFSSL_MD5_HELP_STRING "Enable MD5 (default: enabled)")
-add_option("WOLFSSL_MD5" ${WOLFSSL_MD5_HELP_STRING} "no" "yes;no")
+add_option("WOLFSSL_MD5" ${WOLFSSL_MD5_HELP_STRING} "yes" "yes;no")
-
-if(WOLFSSL_WPAS OR
-   WOLFSSL_HAPROXY OR
-   WOLFSSL_NGINX OR
-   WOLFSSL_OPENSSH OR
-   WOLFSSL_OPENSSLEXTRA OR
-   WOLFSSL_OPENVPN OR
-   WOLFSSL_OLD_TLS OR
-   WOLFSSL_FORTRESS OR
-   WOLFSSL_LIGHTY OR
-   WOLFSSL_DES3 OR
-   WOLFSSL_OPENSSLALL)
-    override_cache(WOLFSSL_MD5 "yes")
-endif()
 
 if(NOT WOLFSSL_MD5)
     list(APPEND WOLFSSL_DEFINITIONS "-DNO_MD5" "-DNO_OLD_TLS")
+else()
+    # turn off MD5 if leanpsk or leantls on
+    if(WOLFSSL_LEAN_PSK OR WOLFSSL_LEAN_TLS)
+        list(APPEND WOLFSSL_DEFINITIONS "-DNO_MD5" "-DNO_OLD_TLS")
+        override_cache(WOLFSSL_MD5 "no")
+    endif()
 endif()
 
 # SHA
@@ -1696,14 +1502,6 @@ if(NOT WOLFSSL_INLINE)
     list(APPEND WOLFSSL_DEFINITIONS "-DNO_INLINE")
 endif()
 
-add_option("WOLFSSL_ARMASM_INLINE"
-    "Enable ARM assembly inline functions (default: disabled)"
-    "no" "yes;no")
-
-if (WOLFSSL_ARMASM_INLINE)
-    list(APPEND WOLFSSL_DEFINITIONS "-DWOLFSSL_ARMASM_INLINE")
-endif()
-
 # TODO:
 #       - CRL monitor
 #       - User crypto
@@ -1735,15 +1533,6 @@ add_option(WOLFSSL_SNI ${WOLFSSL_SNI_HELP_STRING} ${SNI_DEFAULT} "yes;no")
 set(WOLFSSL_TLSX_HELP_STRING "Enable all TLS Extensions (default: disabled)")
 add_option(WOLFSSL_TLSX ${WOLFSSL_TLSX_HELP_STRING} "no" "yes;no")
 
-add_option(WOLFSSL_EX_DATA
-    "Enable app data (default: disabled)"
-    "no" "yes;no")
-
-if (WOLFSSL_EX_DATA)
-    list(APPEND WOLFSSL_DEFINITIONS
-      "-DHAVE_EX_DATA")
-endif()
-
 # Supported elliptic curves extensions
 add_option("WOLFSSL_SUPPORTED_CURVES"
     "Enable Supported Elliptic Curves (default: enabled)"
@@ -1849,9 +1638,6 @@ add_option(WOLFSSL_PKCS7 ${WOLFSSL_PKCS7_HELP_STRING} "no" "yes;no")
 set(WOLFSSL_TPM_HELP_STRING "Enable wolfTPM options (default: disabled)")
 add_option(WOLFSSL_TPM ${WOLFSSL_TPM_HELP_STRING} "no" "yes;no")
 
-set(WOLFSSL_CLU_HELP_STRING "Enable wolfCLU options (default: disabled)")
-add_option(WOLFSSL_CLU ${WOLFSSL_CLU_HELP_STRING} "no" "yes;no")
-
 set(WOLFSSL_AESKEYWRAP_HELP_STRING "Enable AES key wrap support (default: disabled)")
 add_option(WOLFSSL_AESKEYWRAP ${WOLFSSL_AESKEYWRAP_HELP_STRING} "no" "yes;no")
 
@@ -1934,16 +1720,6 @@ if(NOT WOLFSSL_PKCS12)
   list(APPEND WOLFSSL_DEFINITIONS "-DNO_PKCS12")
 endif()
 
-# PKCS#11
-add_option("WOLFSSL_PKCS11"
-    "Enable PKCS#11 (default: disabled)"
-    "no" "yes;no")
-
-if(WOLFSSL_PKCS11 AND NOT WIN32)
-    list(APPEND WOLFSSL_DEFINITIONS "-DHAVE_PKCS11 -DHAVE_WOLF_BIGINT")
-    list(APPEND WOLFSSL_LINK_LIBS ${CMAKE_DL_LIBS})
-endif()
-
 
 # PWDBASED has to come after certservice since we want it on w/o explicit on
 # PWDBASED
@@ -2042,6 +1818,7 @@ add_option("WOLFSSL_CRYPT_TESTS_HELP"
     "no" "yes;no")
 
 # TODO: - LIBZ
+#       - PKCS#11
 #       - Cavium
 #       - Cavium V
 #       - Cavium Octeon
@@ -2080,10 +1857,6 @@ add_option("WOLFSSL_CRYPTOCB"
     "Enable crypto callbacks (default: disabled)"
     "no" "yes;no")
 
-add_option("WOLFSSL_CRYPTOCB_NO_SW_TEST"
-    "Disable crypto callback SW testing (default: disabled)"
-    "no" "yes;no")
-
 add_option("WOLFSSL_PKCALLBACKS"
     "Enable public key callbacks (default: disabled)"
     "no" "yes;no")
@@ -2140,7 +1913,10 @@ add_option("WOLFSSL_SYS_CA_CERTS"
     "yes" "yes;no")
 
 if(WOLFSSL_SYS_CA_CERTS)
-    if(APPLE)
+    if(NOT WOLFSSL_FILESYSTEM)
+        message("Can't enable system CA certs without a filesystem.")
+        override_cache(WOLFSSL_SYS_CA_CERTS "no")
+    elseif(APPLE)
         # Headers used for MacOS default system CA certs behavior. Only MacOS SDK will have this header
         check_include_file("Security/SecTrustSettings.h" HAVE_SECURITY_SECTRUSTSETTINGS_H)
         # Headers used for Apple native cert validation. All device SDKs should have these headers
@@ -2174,9 +1950,6 @@ if(WOLFSSL_SYS_CA_CERTS)
         else()
             message(FATAL_ERROR "Can't enable system CA certs without Apple Security.framework headers.")
         endif()
-    elseif(NOT WIN32 AND NOT WOLFSSL_FILESYSTEM)
-        message("Can't enable system CA certs without a filesystem.")
-        override_cache(WOLFSSL_SYS_CA_CERTS "no")
     endif()
 
 
@@ -2203,26 +1976,6 @@ if(WOLFSSL_TPM)
     override_cache(WOLFSSL_CERTEXT  "yes")
     override_cache(WOLFSSL_PKCS7    "yes")
     override_cache(WOLFSSL_AESCFB   "yes")
-    list(APPEND WOLFSSL_DEFINITIONS "-DWOLFSSL_ALLOW_ENCODING_CA_FALSE")
-endif()
-
-if(WOLFSSL_CLU)
-    override_cache(WOLFSSL_CERTGEN  "yes")
-    override_cache(WOLFSSL_CERTREQ  "yes")
-    override_cache(WOLFSSL_CERTEXT  "yes")
-    override_cache(WOLFSSL_MD5      "yes")
-    override_cache(WOLFSSL_AESCTR   "yes")
-    override_cache(WOLFSSL_KEYGEN   "yes")
-    override_cache(WOLFSSL_OPENSSLALL "yes")
-    override_cache(WOLFSSL_ED25519  "yes")
-    override_cache(WOLFSSL_SHA512   "yes")
-    override_cache(WOLFSSL_DES3     "yes")
-    override_cache(WOLFSSL_PKCS7    "yes")
-    list(APPEND WOLFSSL_DEFINITIONS "-DHAVE_OID_ENCODING" "-DWOLFSSL_NO_ASN_STRICT" "-DWOLFSSL_ALT_NAMES")
-    # Add OPENSSL_ALL definition to ensure OpenSSL compatibility functions are available
-    list(APPEND WOLFSSL_DEFINITIONS "-DOPENSSL_ALL")
-    # Remove NO_DES3 from WOLFSSL_DEFINITIONS to ensure DES3 is enabled
-    list(REMOVE_ITEM WOLFSSL_DEFINITIONS "-DNO_DES3")
 endif()
 
 if(WOLFSSL_AESCFB)
@@ -2307,10 +2060,6 @@ if(WOLFSSL_CRYPTOCB)
     list(APPEND WOLFSSL_DEFINITIONS "-DWOLF_CRYPTO_CB")
 endif()
 
-if(WOLFSSL_CRYPTOCB_NO_SW_TEST)
-    list(APPEND WOLFSSL_DEFINITIONS "-DWC_TEST_NO_CRYPTOCB_SW_TEST")
-endif()
-
 # Public Key Callbacks
 if(WOLFSSL_PKCALLBACKS)
     list(APPEND WOLFSSL_DEFINITIONS "-DHAVE_PK_CALLBACKS")
@@ -2484,21 +2233,35 @@ if (ENABLE_SCCACHE AND (NOT WOLFSSL_SCCACHE_ALREADY_SET_FLAG))
     endif()
 endif()
 
-add_option("WOLFSSL_KEYLOG_EXPORT"
-    "Enable insecure export of TLS secrets to an NSS keylog file (default: disabled)"
-    "no" "yes;no")
-if(WOLFSSL_KEYLOG_EXPORT)
-    message(WARNING "Keylog export enabled -- Sensitive key data will be stored insecurely.")
-    list(APPEND WOLFSSL_DEFINITIONS
-        "-DSHOW_SECRETS"
-        "-DHAVE_SECRET_CALLBACK"
-        "-DWOLFSSL_SSLKEYLOGFILE"
-        "-DWOLFSSL_KEYLOG_EXPORT_WARNED")
-endif()
-
 
 file(REMOVE ${OPTION_FILE})
 
+file(APPEND ${OPTION_FILE} "/* wolfssl options.h\n")
+file(APPEND ${OPTION_FILE} " * generated from configure options\n")
+file(APPEND ${OPTION_FILE} " *\n")
+file(APPEND ${OPTION_FILE} " * Copyright (C) 2006-2023 wolfSSL Inc.\n")
+file(APPEND ${OPTION_FILE} " *\n")
+file(APPEND ${OPTION_FILE} " * This file is part of wolfSSL. (formerly known as CyaSSL)\n")
+file(APPEND ${OPTION_FILE} " *\n")
+file(APPEND ${OPTION_FILE} " */\n\n")
+file(APPEND ${OPTION_FILE} "#ifndef WOLFSSL_OPTIONS_H\n")
+file(APPEND ${OPTION_FILE} "#define WOLFSSL_OPTIONS_H\n\n\n")
+file(APPEND ${OPTION_FILE} "#ifdef __cplusplus\n")
+file(APPEND ${OPTION_FILE} "extern \"C\" {\n")
+file(APPEND ${OPTION_FILE} "#endif\n\n")
+
+add_to_options_file("${WOLFSSL_DEFINITIONS}" "${OPTION_FILE}")
+# CMAKE_C_FLAGS is just a string of space-separated flags to pass to the C
+# compiler. We need to replace those spaces with semicolons in order to treat it
+# as a CMake list.
+string(REPLACE " " ";" CMAKE_C_FLAGS_LIST "${CMAKE_C_FLAGS}")
+add_to_options_file("${CMAKE_C_FLAGS_LIST}" "${OPTION_FILE}")
+
+file(APPEND ${OPTION_FILE} "\n#ifdef __cplusplus\n")
+file(APPEND ${OPTION_FILE} "}\n")
+file(APPEND ${OPTION_FILE} "#endif\n\n\n")
+file(APPEND ${OPTION_FILE} "#endif /* WOLFSSL_OPTIONS_H */\n\n")
+
 ####################################################
 # Library Target
 ####################################################
@@ -2576,20 +2339,6 @@ if(WOLFSSL_ARIA)
     message(STATUS "ARIA Check: WOLFSSL_LINK_LIBS    = ${WOLFSSL_LINK_LIBS}")
 endif()
 
-foreach(DEF IN LISTS WOLFSSL_DEFINITIONS)
-    string(REGEX MATCH "^(-D)?([^=]+)(=(.*))?$" DEF_MATCH ${DEF})
-    if (NOT "${CMAKE_MATCH_4}" STREQUAL "")
-        set(${CMAKE_MATCH_2} ${CMAKE_MATCH_4})
-        # message("set(${CMAKE_MATCH_2} ${CMAKE_MATCH_4})")
-    else()
-        set(${CMAKE_MATCH_2} 1)
-        # message("set(${CMAKE_MATCH_2} 1)")
-    endif()
-endforeach()
-
-# If new build options are added please update the cmake/options.h.in
-configure_file(${CMAKE_CURRENT_SOURCE_DIR}/cmake/options.h.in ${OPTION_FILE})
-
 set_target_properties(wolfssl
     PROPERTIES
         SOVERSION ${WOLFSSL_LIBRARY_VERSION_FIRST}
@@ -2626,24 +2375,17 @@ target_include_directories(wolfssl
 
 target_link_libraries(wolfssl PUBLIC ${WOLFSSL_LINK_LIBS})
 
-if(CMAKE_C_COMPILER_ID STREQUAL "OpenWatcom")
+if(WIN32)
-    if(CMAKE_SYSTEM_NAME STREQUAL "Windows")
+    # For Windows link ws2_32
-        target_link_libraries(wolfssl PUBLIC ws2_32 crypt32)
-    endif()
-elseif (WIN32 OR ${CMAKE_SYSTEM_NAME} MATCHES "^MSYS" OR ${CMAKE_SYSTEM_NAME} MATCHES "^MINGW")
-    # For Windows link required libraries
-    message("Building on Windows/MSYS/MINGW")
     target_link_libraries(wolfssl PUBLIC
-        ws2_32 crypt32 advapi32)
+        $<$<PLATFORM_ID:Windows>:ws2_32 crypt32>)
 elseif(APPLE)
-    message("Building on Apple")
     if(WOLFSSL_SYS_CA_CERTS)
         target_link_libraries(wolfssl PUBLIC
             ${CORE_FOUNDATION_FRAMEWORK}
             ${SECURITY_FRAMEWORK})
     endif()
 else()
-    message("Building on Linux (or other)")
     if(WOLFSSL_DH AND NOT WOLFSSL_DH_CONST)
         # DH requires math (m) library
         target_link_libraries(wolfssl
@@ -2695,14 +2437,12 @@ if(WOLFSSL_EXAMPLES)
                  PROPERTY RUNTIME_OUTPUT_DIRECTORY
                  ${WOLFSSL_OUTPUT_BASE}/examples/echoserver)
 
-    if(NOT WIN32 AND NOT WOLFSSL_SINGLE_THREADED)
+    if(NOT WIN32)
         # Build TLS benchmark example
         add_executable(tls_bench
             ${CMAKE_CURRENT_SOURCE_DIR}/examples/benchmark/tls_bench.c)
         target_link_libraries(tls_bench wolfssl)
-        if(CMAKE_USE_PTHREADS_INIT)
+        target_link_libraries(tls_bench Threads::Threads)
-            target_link_libraries(tls_bench Threads::Threads)
-        endif()
         set_property(TARGET tls_bench
                  PROPERTY RUNTIME_OUTPUT_DIRECTORY
                  ${WOLFSSL_OUTPUT_BASE}/examples/benchmark)
@@ -2711,102 +2451,19 @@ if(WOLFSSL_EXAMPLES)
     # Build unit tests
     add_executable(unit_test
         tests/api.c
-        tests/api/test_md2.c
+        tests/hash.c
-        tests/api/test_md4.c
-        tests/api/test_md5.c
-        tests/api/test_sha.c
-        tests/api/test_sha256.c
-        tests/api/test_sha512.c
-        tests/api/test_sha3.c
-        tests/api/test_blake2.c
-        tests/api/test_sm3.c
-        tests/api/test_ripemd.c
-        tests/api/test_hash.c
-        tests/api/test_hmac.c
-        tests/api/test_cmac.c
-        tests/api/test_des3.c
-        tests/api/test_chacha.c
-        tests/api/test_poly1305.c
-        tests/api/test_chacha20_poly1305.c
-        tests/api/test_camellia.c
-        tests/api/test_arc4.c
-        tests/api/test_rc2.c
-        tests/api/test_aes.c
-        tests/api/test_ascon.c
-        tests/api/test_sm4.c
-        tests/api/test_wc_encrypt.c
-        tests/api/test_random.c
-        tests/api/test_wolfmath.c
-        tests/api/test_rsa.c
-        tests/api/test_dsa.c
-        tests/api/test_dh.c
-        tests/api/test_ecc.c
-        tests/api/test_sm2.c
-        tests/api/test_curve25519.c
-        tests/api/test_ed25519.c
-        tests/api/test_curve448.c
-        tests/api/test_ed448.c
-        tests/api/test_mlkem.c
-        tests/api/test_mldsa.c
-        tests/api/test_signature.c
-        tests/api/test_dtls.c
-        tests/api/test_ocsp.c
-        tests/api/test_evp.c
-        tests/api/test_tls_ext.c
-        tests/api/test_tls.c
-        tests/api/test_x509.c
-        tests/api/test_asn.c
-        tests/api/test_pkcs7.c
-        tests/api/test_pkcs12.c
-        tests/api/test_ossl_asn1.c
-        tests/api/test_ossl_bio.c
-        tests/api/test_ossl_bn.c
-        tests/api/test_ossl_cipher.c
-        tests/api/test_ossl_dh.c
-        tests/api/test_ossl_dgst.c
-        tests/api/test_ossl_dsa.c
-        tests/api/test_ossl_ec.c
-        tests/api/test_ossl_ecx.c
-        tests/api/test_ossl_mac.c
-        tests/api/test_ossl_rsa.c
-        tests/api/test_ossl_sk.c
-        tests/api/test_ossl_x509.c
-        tests/api/test_ossl_x509_ext.c
-        tests/api/test_ossl_x509_name.c
-        tests/api/test_ossl_x509_pk.c
-        tests/api/test_ossl_x509_vp.c
-        tests/api/test_ossl_x509_io.c
-        tests/api/test_ossl_x509_crypto.c
-        tests/api/test_ossl_x509_acert.c
-        tests/api/test_ossl_x509_info.c
-        tests/api/test_ossl_x509_str.c
-        tests/api/test_ossl_x509_lu.c
-        tests/api/test_ossl_pem.c
-        tests/api/test_ossl_rand.c
-        tests/api/test_ossl_obj.c
-        tests/api/test_ossl_p7p12.c
-        tests/api/test_evp_digest.c
-        tests/api/test_evp_cipher.c
-        tests/api/test_evp_pkey.c
-        tests/api/test_certman.c
-        tests/api/test_tls13.c
         tests/srp.c
         tests/suites.c
         tests/w64wrapper.c
         tests/unit.c
         tests/quic.c
-        tests/utils.c
-        testsuite/utils.c
         examples/server/server.c
-        examples/client/client.c
+        examples/client/client.c)
-        wolfcrypt/test/test.c)
     target_include_directories(unit_test PRIVATE
         ${CMAKE_CURRENT_BINARY_DIR})
     target_compile_options(unit_test PUBLIC "-DNO_MAIN_DRIVER")
     target_link_libraries(unit_test wolfssl)
-    if(CMAKE_USE_PTHREADS_INIT)
+    target_link_libraries(unit_test Threads::Threads)
-        target_link_libraries(unit_test Threads::Threads)
-    endif()
     set_property(TARGET unit_test
                  PROPERTY RUNTIME_OUTPUT_DIRECTORY
                  ${WOLFSSL_OUTPUT_BASE}/tests/)
@@ -3056,29 +2713,16 @@ if(WOLFSSL_INSTALL)
     set(includedir "\${prefix}/include")
     set(VERSION ${PROJECT_VERSION})
 
-    if(CMAKE_C_COMPILER_ID STREQUAL "OpenWatcom")
+    # Setting libm in Libs.private of wolfssl.pc.
+    # See "Link Libraries" in above about `m` insertion to LINK_LIBRARIES
+    get_target_property(_wolfssl_dep_libs wolfssl LINK_LIBRARIES)
+    list(FIND _wolfssl_dep_libs m _dep_libm)
+    if ("${_dep_libm}" GREATER -1)
+      set(LIBM -lm)
     else()
-        # Setting libm in Libs.private of wolfssl.pc.
+      set(LIBM)
-        # See "Link Libraries" in above about `m` insertion to LINK_LIBRARIES
-        get_target_property(_wolfssl_dep_libs wolfssl LINK_LIBRARIES)
-        list(FIND _wolfssl_dep_libs m _dep_libm)
-        if ("${_dep_libm}" GREATER -1)
-            set(LIBM -lm)
-        else()
-            set(LIBM)
-        endif()
     endif()
 
-    # Add required frameworks for static linking on Apple platforms
-    if(APPLE AND NOT BUILD_SHARED_LIBS)
-        if(WOLFSSL_SYS_CA_CERTS)
-            list(APPEND PC_LIBS_PRIVATE "-framework CoreFoundation" "-framework Security")
-        endif()
-    endif()
-
-    # Convert lists to space-separated strings for pkg-config
-    string(JOIN " " PC_LIBS_PRIVATE ${PC_LIBS_PRIVATE})
-
     configure_file(support/wolfssl.pc.in ${CMAKE_CURRENT_BINARY_DIR}/support/wolfssl.pc @ONLY)
     install(FILES ${CMAKE_CURRENT_BINARY_DIR}/support/wolfssl.pc
     DESTINATION ${CMAKE_INSTALL_LIBDIR}/pkgconfig)

CMakePresets.json

@@ -1,20 +0,0 @@
-{
-    "version": 3,
-    "cmakeMinimumRequired": {
-        "major": 3,
-        "minor": 22,
-        "patch": 0
-    },
-    "configurePresets": [
-        {
-            "name": "vs2022-x64",
-            "displayName": "Visual Studio 2022 x64",
-            "generator": "Visual Studio 17 2022",
-            "architecture": "x64",
-            "binaryDir": "${sourceDir}/build",
-            "cacheVariables": {
-                "CMAKE_EXPORT_COMPILE_COMMANDS": "ON"
-            }
-        }
-    ]
-}

CMakeSettings.json

@@ -1,9 +0,0 @@
-{
-    "configurations": [
-        {
-            "name": "No-CMake",
-            "generator": "Ninja",
-            "buildCommandArgs": "echo 'No build command'"
-        }
-    ]
-}

COPYING

@@ -1,622 +1,281 @@
                     GNU GENERAL PUBLIC LICENSE
-                       Version 3, 29 June 2007
+                       Version 2, June 1991
 
- Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
                             Preamble
 
-  The GNU General Public License is a free, copyleft license for
+  The licenses for most software are designed to take away your
-software and other kinds of works.
+freedom to share and change it.  By contrast, the GNU General Public
-
+License is intended to guarantee your freedom to share and change free
-  The licenses for most software and other practical works are designed
+software--to make sure the software is free for all its users.  This
-to take away your freedom to share and change the works.  By contrast,
+General Public License applies to most of the Free Software
-the GNU General Public License is intended to guarantee your freedom to
+Foundation's software and to any other program whose authors commit to
-share and change all versions of a program--to make sure it remains free
+using it.  (Some other Free Software Foundation software is covered by
-software for all its users.  We, the Free Software Foundation, use the
+the GNU Lesser General Public License instead.)  You can apply it to
-GNU General Public License for most of our software; it applies also to
-any other work released this way by its authors.  You can apply it to
 your programs, too.
 
   When we speak of free software, we are referring to freedom, not
 price.  Our General Public Licenses are designed to make sure that you
 have the freedom to distribute copies of free software (and charge for
-them if you wish), that you receive source code or can get it if you
+this service if you wish), that you receive source code or can get it
-want it, that you can change the software or use pieces of it in new
+if you want it, that you can change the software or use pieces of it
-free programs, and that you know you can do these things.
+in new free programs; and that you know you can do these things.
 
-  To protect your rights, we need to prevent others from denying you
+  To protect your rights, we need to make restrictions that forbid
-these rights or asking you to surrender the rights.  Therefore, you have
+anyone to deny you these rights or to ask you to surrender the rights.
-certain responsibilities if you distribute copies of the software, or if
+These restrictions translate to certain responsibilities for you if you
-you modify it: responsibilities to respect the freedom of others.
+distribute copies of the software, or if you modify it.
 
   For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must pass on to the recipients the same
+gratis or for a fee, you must give the recipients all the rights that
-freedoms that you received.  You must make sure that they, too, receive
+you have.  You must make sure that they, too, receive or can get the
-or can get the source code.  And you must show them these terms so they
+source code.  And you must show them these terms so they know their
-know their rights.
+rights.
 
-  Developers that use the GNU GPL protect your rights with two steps:
+  We protect your rights with two steps: (1) copyright the software, and
-(1) assert copyright on the software, and (2) offer you this License
+(2) offer you this license which gives you legal permission to copy,
-giving you legal permission to copy, distribute and/or modify it.
+distribute and/or modify the software.
 
-  For the developers' and authors' protection, the GPL clearly explains
+  Also, for each author's protection and ours, we want to make certain
-that there is no warranty for this free software.  For both users' and
+that everyone understands that there is no warranty for this free
-authors' sake, the GPL requires that modified versions be marked as
+software.  If the software is modified by someone else and passed on, we
-changed, so that their problems will not be attributed erroneously to
+want its recipients to know that what they have is not the original, so
-authors of previous versions.
+that any problems introduced by others will not reflect on the original
+authors' reputations.
 
-  Some devices are designed to deny users access to install or run
+  Finally, any free program is threatened constantly by software
-modified versions of the software inside them, although the manufacturer
+patents.  We wish to avoid the danger that redistributors of a free
-can do so.  This is fundamentally incompatible with the aim of
+program will individually obtain patent licenses, in effect making the
-protecting users' freedom to change the software.  The systematic
+program proprietary.  To prevent this, we have made it clear that any
-pattern of such abuse occurs in the area of products for individuals to
+patent must be licensed for everyone's free use or not licensed at all.
-use, which is precisely where it is most unacceptable.  Therefore, we
-have designed this version of the GPL to prohibit the practice for those
-products.  If such problems arise substantially in other domains, we
-stand ready to extend this provision to those domains in future versions
-of the GPL, as needed to protect the freedom of users.
-
-  Finally, every program is threatened constantly by software patents.
-States should not allow patents to restrict development and use of
-software on general-purpose computers, but in those that do, we wish to
-avoid the special danger that patents applied to a free program could
-make it effectively proprietary.  To prevent this, the GPL assures that
-patents cannot be used to render the program non-free.
 
   The precise terms and conditions for copying, distribution and
 modification follow.
 
-                       TERMS AND CONDITIONS
+                    GNU GENERAL PUBLIC LICENSE
-
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-  0. Definitions.
+
-
+  0. This License applies to any program or other work which contains
-  "This License" refers to version 3 of the GNU General Public License.
+a notice placed by the copyright holder saying it may be distributed
-
+under the terms of this General Public License.  The "Program", below,
-  "Copyright" also means copyright-like laws that apply to other kinds of
+refers to any such program or work, and a "work based on the Program"
-works, such as semiconductor masks.
+means either the Program or any derivative work under copyright law:
-
+that is to say, a work containing the Program or a portion of it,
-  "The Program" refers to any copyrightable work licensed under this
+either verbatim or with modifications and/or translated into another
-License.  Each licensee is addressed as "you".  "Licensees" and
+language.  (Hereinafter, translation is included without limitation in
-"recipients" may be individuals or organizations.
+the term "modification".)  Each licensee is addressed as "you".
-
+
-  To "modify" a work means to copy from or adapt all or part of the work
+Activities other than copying, distribution and modification are not
-in a fashion requiring copyright permission, other than the making of an
+covered by this License; they are outside its scope.  The act of
-exact copy.  The resulting work is called a "modified version" of the
+running the Program is not restricted, and the output from the Program
-earlier work or a work "based on" the earlier work.
+is covered only if its contents constitute a work based on the
-
+Program (independent of having been made by running the Program).
-  A "covered work" means either the unmodified Program or a work based
+Whether that is true depends on what the Program does.
-on the Program.
+
-
+  1. You may copy and distribute verbatim copies of the Program's
-  To "propagate" a work means to do anything with it that, without
+source code as you receive it, in any medium, provided that you
-permission, would make you directly or secondarily liable for
+conspicuously and appropriately publish on each copy an appropriate
-infringement under applicable copyright law, except executing it on a
+copyright notice and disclaimer of warranty; keep intact all the
-computer or modifying a private copy.  Propagation includes copying,
+notices that refer to this License and to the absence of any warranty;
-distribution (with or without modification), making available to the
+and give any other recipients of the Program a copy of this License
-public, and in some countries other activities as well.
+along with the Program.
-
+
-  To "convey" a work means any kind of propagation that enables other
+You may charge a fee for the physical act of transferring a copy, and
-parties to make or receive copies.  Mere interaction with a user through
+you may at your option offer warranty protection in exchange for a fee.
-a computer network, with no transfer of a copy, is not conveying.
+
-
+  2. You may modify your copy or copies of the Program or any portion
-  An interactive user interface displays "Appropriate Legal Notices"
+of it, thus forming a work based on the Program, and copy and
-to the extent that it includes a convenient and prominently visible
+distribute such modifications or work under the terms of Section 1
-feature that (1) displays an appropriate copyright notice, and (2)
+above, provided that you also meet all of these conditions:
-tells the user that there is no warranty for the work (except to the
+
-extent that warranties are provided), that licensees may convey the
+    a) You must cause the modified files to carry prominent notices
-work under this License, and how to view a copy of this License.  If
+    stating that you changed the files and the date of any change.
-the interface presents a list of user commands or options, such as a
+
-menu, a prominent item in the list meets this criterion.
+    b) You must cause any work that you distribute or publish, that in
-
+    whole or in part contains or is derived from the Program or any
-  1. Source Code.
+    part thereof, to be licensed as a whole at no charge to all third
-
+    parties under the terms of this License.
-  The "source code" for a work means the preferred form of the work
+
-for making modifications to it.  "Object code" means any non-source
+    c) If the modified program normally reads commands interactively
-form of a work.
+    when run, you must cause it, when started running for such
-
+    interactive use in the most ordinary way, to print or display an
-  A "Standard Interface" means an interface that either is an official
+    announcement including an appropriate copyright notice and a
-standard defined by a recognized standards body, or, in the case of
+    notice that there is no warranty (or else, saying that you provide
-interfaces specified for a particular programming language, one that
+    a warranty) and that users may redistribute the program under
-is widely used among developers working in that language.
+    these conditions, and telling the user how to view a copy of this
-
+    License.  (Exception: if the Program itself is interactive but
-  The "System Libraries" of an executable work include anything, other
+    does not normally print such an announcement, your work based on
-than the work as a whole, that (a) is included in the normal form of
+    the Program is not required to print an announcement.)
-packaging a Major Component, but which is not part of that Major
+
-Component, and (b) serves only to enable use of the work with that
+These requirements apply to the modified work as a whole.  If
-Major Component, or to implement a Standard Interface for which an
+identifiable sections of that work are not derived from the Program,
-implementation is available to the public in source code form.  A
+and can be reasonably considered independent and separate works in
-"Major Component", in this context, means a major essential component
+themselves, then this License, and its terms, do not apply to those
-(kernel, window system, and so on) of the specific operating system
+sections when you distribute them as separate works.  But when you
-(if any) on which the executable work runs, or a compiler used to
+distribute the same sections as part of a whole which is a work based
-produce the work, or an object code interpreter used to run it.
+on the Program, the distribution of the whole must be on the terms of
-
+this License, whose permissions for other licensees extend to the
-  The "Corresponding Source" for a work in object code form means all
+entire whole, and thus to each and every part regardless of who wrote it.
-the source code needed to generate, install, and (for an executable
+
-work) run the object code and to modify the work, including scripts to
+Thus, it is not the intent of this section to claim rights or contest
-control those activities.  However, it does not include the work's
+your rights to work written entirely by you; rather, the intent is to
-System Libraries, or general-purpose tools or generally available free
+exercise the right to control the distribution of derivative or
-programs which are used unmodified in performing those activities but
+collective works based on the Program.
-which are not part of the work.  For example, Corresponding Source
+
-includes interface definition files associated with source files for
+In addition, mere aggregation of another work not based on the Program
-the work, and the source code for shared libraries and dynamically
+with the Program (or with a work based on the Program) on a volume of
-linked subprograms that the work is specifically designed to require,
+a storage or distribution medium does not bring the other work under
-such as by intimate data communication or control flow between those
+the scope of this License.
-subprograms and other parts of the work.
+
-
+  3. You may copy and distribute the Program (or a work based on it,
-  The Corresponding Source need not include anything that users
+under Section 2) in object code or executable form under the terms of
-can regenerate automatically from other parts of the Corresponding
+Sections 1 and 2 above provided that you also do one of the following:
-Source.
+
-
+    a) Accompany it with the complete corresponding machine-readable
-  The Corresponding Source for a work in source code form is that
+    source code, which must be distributed under the terms of Sections
-same work.
+    1 and 2 above on a medium customarily used for software interchange; or,
-
+
-  2. Basic Permissions.
+    b) Accompany it with a written offer, valid for at least three
-
+    years, to give any third party, for a charge no more than your
-  All rights granted under this License are granted for the term of
+    cost of physically performing source distribution, a complete
-copyright on the Program, and are irrevocable provided the stated
+    machine-readable copy of the corresponding source code, to be
-conditions are met.  This License explicitly affirms your unlimited
+    distributed under the terms of Sections 1 and 2 above on a medium
-permission to run the unmodified Program.  The output from running a
+    customarily used for software interchange; or,
-covered work is covered by this License only if the output, given its
+
-content, constitutes a covered work.  This License acknowledges your
+    c) Accompany it with the information you received as to the offer
-rights of fair use or other equivalent, as provided by copyright law.
+    to distribute corresponding source code.  (This alternative is
-
+    allowed only for noncommercial distribution and only if you
-  You may make, run and propagate covered works that you do not
+    received the program in object code or executable form with such
-convey, without conditions so long as your license otherwise remains
+    an offer, in accord with Subsection b above.)
-in force.  You may convey covered works to others for the sole purpose
+
-of having them make modifications exclusively for you, or provide you
+The source code for a work means the preferred form of the work for
-with facilities for running those works, provided that you comply with
+making modifications to it.  For an executable work, complete source
-the terms of this License in conveying all material for which you do
+code means all the source code for all modules it contains, plus any
-not control copyright.  Those thus making or running the covered works
+associated interface definition files, plus the scripts used to
-for you must do so exclusively on your behalf, under your direction
+control compilation and installation of the executable.  However, as a
-and control, on terms that prohibit them from making any copies of
+special exception, the source code distributed need not include
-your copyrighted material outside their relationship with you.
+anything that is normally distributed (in either source or binary
-
+form) with the major components (compiler, kernel, and so on) of the
-  Conveying under any other circumstances is permitted solely under
+operating system on which the executable runs, unless that component
-the conditions stated below.  Sublicensing is not allowed; section 10
+itself accompanies the executable.
-makes it unnecessary.
+
-
+If distribution of executable or object code is made by offering
-  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+access to copy from a designated place, then offering equivalent
-
+access to copy the source code from the same place counts as
-  No covered work shall be deemed part of an effective technological
+distribution of the source code, even though third parties are not
-measure under any applicable law fulfilling obligations under article
+compelled to copy the source along with the object code.
-11 of the WIPO copyright treaty adopted on 20 December 1996, or
+
-similar laws prohibiting or restricting circumvention of such
+  4. You may not copy, modify, sublicense, or distribute the Program
-measures.
+except as expressly provided under this License.  Any attempt
-
+otherwise to copy, modify, sublicense or distribute the Program is
-  When you convey a covered work, you waive any legal power to forbid
+void, and will automatically terminate your rights under this License.
-circumvention of technological measures to the extent such circumvention
+However, parties who have received copies, or rights, from you under
-is effected by exercising rights under this License with respect to
+this License will not have their licenses terminated so long as such
-the covered work, and you disclaim any intention to limit operation or
+parties remain in full compliance.
-modification of the work as a means of enforcing, against the work's
+
-users, your or third parties' legal rights to forbid circumvention of
+  5. You are not required to accept this License, since you have not
-technological measures.
+signed it.  However, nothing else grants you permission to modify or
-
+distribute the Program or its derivative works.  These actions are
-  4. Conveying Verbatim Copies.
+prohibited by law if you do not accept this License.  Therefore, by
-
+modifying or distributing the Program (or any work based on the
-  You may convey verbatim copies of the Program's source code as you
+Program), you indicate your acceptance of this License to do so, and
-receive it, in any medium, provided that you conspicuously and
+all its terms and conditions for copying, distributing or modifying
-appropriately publish on each copy an appropriate copyright notice;
+the Program or works based on it.
-keep intact all notices stating that this License and any
+
-non-permissive terms added in accord with section 7 apply to the code;
+  6. Each time you redistribute the Program (or any work based on the
-keep intact all notices of the absence of any warranty; and give all
+Program), the recipient automatically receives a license from the
-recipients a copy of this License along with the Program.
+original licensor to copy, distribute or modify the Program subject to
-
+these terms and conditions.  You may not impose any further
-  You may charge any price or no price for each copy that you convey,
+restrictions on the recipients' exercise of the rights granted herein.
-and you may offer support or warranty protection for a fee.
+You are not responsible for enforcing compliance by third parties to
-
-  5. Conveying Modified Source Versions.
-
-  You may convey a work based on the Program, or the modifications to
-produce it from the Program, in the form of source code under the
-terms of section 4, provided that you also meet all of these conditions:
-
-    a) The work must carry prominent notices stating that you modified
-    it, and giving a relevant date.
-
-    b) The work must carry prominent notices stating that it is
-    released under this License and any conditions added under section
-    7.  This requirement modifies the requirement in section 4 to
-    "keep intact all notices".
-
-    c) You must license the entire work, as a whole, under this
-    License to anyone who comes into possession of a copy.  This
-    License will therefore apply, along with any applicable section 7
-    additional terms, to the whole of the work, and all its parts,
-    regardless of how they are packaged.  This License gives no
-    permission to license the work in any other way, but it does not
-    invalidate such permission if you have separately received it.
-
-    d) If the work has interactive user interfaces, each must display
-    Appropriate Legal Notices; however, if the Program has interactive
-    interfaces that do not display Appropriate Legal Notices, your
-    work need not make them do so.
-
-  A compilation of a covered work with other separate and independent
-works, which are not by their nature extensions of the covered work,
-and which are not combined with it such as to form a larger program,
-in or on a volume of a storage or distribution medium, is called an
-"aggregate" if the compilation and its resulting copyright are not
-used to limit the access or legal rights of the compilation's users
-beyond what the individual works permit.  Inclusion of a covered work
-in an aggregate does not cause this License to apply to the other
-parts of the aggregate.
-
-  6. Conveying Non-Source Forms.
-
-  You may convey a covered work in object code form under the terms
-of sections 4 and 5, provided that you also convey the
-machine-readable Corresponding Source under the terms of this License,
-in one of these ways:
-
-    a) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by the
-    Corresponding Source fixed on a durable physical medium
-    customarily used for software interchange.
-
-    b) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by a
-    written offer, valid for at least three years and valid for as
-    long as you offer spare parts or customer support for that product
-    model, to give anyone who possesses the object code either (1) a
-    copy of the Corresponding Source for all the software in the
-    product that is covered by this License, on a durable physical
-    medium customarily used for software interchange, for a price no
-    more than your reasonable cost of physically performing this
-    conveying of source, or (2) access to copy the
-    Corresponding Source from a network server at no charge.
-
-    c) Convey individual copies of the object code with a copy of the
-    written offer to provide the Corresponding Source.  This
-    alternative is allowed only occasionally and noncommercially, and
-    only if you received the object code with such an offer, in accord
-    with subsection 6b.
-
-    d) Convey the object code by offering access from a designated
-    place (gratis or for a charge), and offer equivalent access to the
-    Corresponding Source in the same way through the same place at no
-    further charge.  You need not require recipients to copy the
-    Corresponding Source along with the object code.  If the place to
-    copy the object code is a network server, the Corresponding Source
-    may be on a different server (operated by you or a third party)
-    that supports equivalent copying facilities, provided you maintain
-    clear directions next to the object code saying where to find the
-    Corresponding Source.  Regardless of what server hosts the
-    Corresponding Source, you remain obligated to ensure that it is
-    available for as long as needed to satisfy these requirements.
-
-    e) Convey the object code using peer-to-peer transmission, provided
-    you inform other peers where the object code and Corresponding
-    Source of the work are being offered to the general public at no
-    charge under subsection 6d.
-
-  A separable portion of the object code, whose source code is excluded
-from the Corresponding Source as a System Library, need not be
-included in conveying the object code work.
-
-  A "User Product" is either (1) a "consumer product", which means any
-tangible personal property which is normally used for personal, family,
-or household purposes, or (2) anything designed or sold for incorporation
-into a dwelling.  In determining whether a product is a consumer product,
-doubtful cases shall be resolved in favor of coverage.  For a particular
-product received by a particular user, "normally used" refers to a
-typical or common use of that class of product, regardless of the status
-of the particular user or of the way in which the particular user
-actually uses, or expects or is expected to use, the product.  A product
-is a consumer product regardless of whether the product has substantial
-commercial, industrial or non-consumer uses, unless such uses represent
-the only significant mode of use of the product.
-
-  "Installation Information" for a User Product means any methods,
-procedures, authorization keys, or other information required to install
-and execute modified versions of a covered work in that User Product from
-a modified version of its Corresponding Source.  The information must
-suffice to ensure that the continued functioning of the modified object
-code is in no case prevented or interfered with solely because
-modification has been made.
-
-  If you convey an object code work under this section in, or with, or
-specifically for use in, a User Product, and the conveying occurs as
-part of a transaction in which the right of possession and use of the
-User Product is transferred to the recipient in perpetuity or for a
-fixed term (regardless of how the transaction is characterized), the
-Corresponding Source conveyed under this section must be accompanied
-by the Installation Information.  But this requirement does not apply
-if neither you nor any third party retains the ability to install
-modified object code on the User Product (for example, the work has
-been installed in ROM).
-
-  The requirement to provide Installation Information does not include a
-requirement to continue to provide support service, warranty, or updates
-for a work that has been modified or installed by the recipient, or for
-the User Product in which it has been modified or installed.  Access to a
-network may be denied when the modification itself materially and
-adversely affects the operation of the network or violates the rules and
-protocols for communication across the network.
-
-  Corresponding Source conveyed, and Installation Information provided,
-in accord with this section must be in a format that is publicly
-documented (and with an implementation available to the public in
-source code form), and must require no special password or key for
-unpacking, reading or copying.
-
-  7. Additional Terms.
-
-  "Additional permissions" are terms that supplement the terms of this
-License by making exceptions from one or more of its conditions.
-Additional permissions that are applicable to the entire Program shall
-be treated as though they were included in this License, to the extent
-that they are valid under applicable law.  If additional permissions
-apply only to part of the Program, that part may be used separately
-under those permissions, but the entire Program remains governed by
-this License without regard to the additional permissions.
-
-  When you convey a copy of a covered work, you may at your option
-remove any additional permissions from that copy, or from any part of
-it.  (Additional permissions may be written to require their own
-removal in certain cases when you modify the work.)  You may place
-additional permissions on material, added by you to a covered work,
-for which you have or can give appropriate copyright permission.
-
-  Notwithstanding any other provision of this License, for material you
-add to a covered work, you may (if authorized by the copyright holders of
-that material) supplement the terms of this License with terms:
-
-    a) Disclaiming warranty or limiting liability differently from the
-    terms of sections 15 and 16 of this License; or
-
-    b) Requiring preservation of specified reasonable legal notices or
-    author attributions in that material or in the Appropriate Legal
-    Notices displayed by works containing it; or
-
-    c) Prohibiting misrepresentation of the origin of that material, or
-    requiring that modified versions of such material be marked in
-    reasonable ways as different from the original version; or
-
-    d) Limiting the use for publicity purposes of names of licensors or
-    authors of the material; or
-
-    e) Declining to grant rights under trademark law for use of some
-    trade names, trademarks, or service marks; or
-
-    f) Requiring indemnification of licensors and authors of that
-    material by anyone who conveys the material (or modified versions of
-    it) with contractual assumptions of liability to the recipient, for
-    any liability that these contractual assumptions directly impose on
-    those licensors and authors.
-
-  All other non-permissive additional terms are considered "further
-restrictions" within the meaning of section 10.  If the Program as you
-received it, or any part of it, contains a notice stating that it is
-governed by this License along with a term that is a further
-restriction, you may remove that term.  If a license document contains
-a further restriction but permits relicensing or conveying under this
-License, you may add to a covered work material governed by the terms
-of that license document, provided that the further restriction does
-not survive such relicensing or conveying.
-
-  If you add terms to a covered work in accord with this section, you
-must place, in the relevant source files, a statement of the
-additional terms that apply to those files, or a notice indicating
-where to find the applicable terms.
-
-  Additional terms, permissive or non-permissive, may be stated in the
-form of a separately written license, or stated as exceptions;
-the above requirements apply either way.
-
-  8. Termination.
-
-  You may not propagate or modify a covered work except as expressly
-provided under this License.  Any attempt otherwise to propagate or
-modify it is void, and will automatically terminate your rights under
-this License (including any patent licenses granted under the third
-paragraph of section 11).
-
-  However, if you cease all violation of this License, then your
-license from a particular copyright holder is reinstated (a)
-provisionally, unless and until the copyright holder explicitly and
-finally terminates your license, and (b) permanently, if the copyright
-holder fails to notify you of the violation by some reasonable means
-prior to 60 days after the cessation.
-
-  Moreover, your license from a particular copyright holder is
-reinstated permanently if the copyright holder notifies you of the
-violation by some reasonable means, this is the first time you have
-received notice of violation of this License (for any work) from that
-copyright holder, and you cure the violation prior to 30 days after
-your receipt of the notice.
-
-  Termination of your rights under this section does not terminate the
-licenses of parties who have received copies or rights from you under
-this License.  If your rights have been terminated and not permanently
-reinstated, you do not qualify to receive new licenses for the same
-material under section 10.
-
-  9. Acceptance Not Required for Having Copies.
-
-  You are not required to accept this License in order to receive or
-run a copy of the Program.  Ancillary propagation of a covered work
-occurring solely as a consequence of using peer-to-peer transmission
-to receive a copy likewise does not require acceptance.  However,
-nothing other than this License grants you permission to propagate or
-modify any covered work.  These actions infringe copyright if you do
-not accept this License.  Therefore, by modifying or propagating a
-covered work, you indicate your acceptance of this License to do so.
-
-  10. Automatic Licensing of Downstream Recipients.
-
-  Each time you convey a covered work, the recipient automatically
-receives a license from the original licensors, to run, modify and
-propagate that work, subject to this License.  You are not responsible
-for enforcing compliance by third parties with this License.
-
-  An "entity transaction" is a transaction transferring control of an
-organization, or substantially all assets of one, or subdividing an
-organization, or merging organizations.  If propagation of a covered
-work results from an entity transaction, each party to that
-transaction who receives a copy of the work also receives whatever
-licenses to the work the party's predecessor in interest had or could
-give under the previous paragraph, plus a right to possession of the
-Corresponding Source of the work from the predecessor in interest, if
-the predecessor has it or can get it with reasonable efforts.
-
-  You may not impose any further restrictions on the exercise of the
-rights granted or affirmed under this License.  For example, you may
-not impose a license fee, royalty, or other charge for exercise of
-rights granted under this License, and you may not initiate litigation
-(including a cross-claim or counterclaim in a lawsuit) alleging that
-any patent claim is infringed by making, using, selling, offering for
-sale, or importing the Program or any portion of it.
-
-  11. Patents.
-
-  A "contributor" is a copyright holder who authorizes use under this
-License of the Program or a work on which the Program is based.  The
-work thus licensed is called the contributor's "contributor version".
-
-  A contributor's "essential patent claims" are all patent claims
-owned or controlled by the contributor, whether already acquired or
-hereafter acquired, that would be infringed by some manner, permitted
-by this License, of making, using, or selling its contributor version,
-but do not include claims that would be infringed only as a
-consequence of further modification of the contributor version.  For
-purposes of this definition, "control" includes the right to grant
-patent sublicenses in a manner consistent with the requirements of
 this License.
 
-  Each contributor grants you a non-exclusive, worldwide, royalty-free
+  7. If, as a consequence of a court judgment or allegation of patent
-patent license under the contributor's essential patent claims, to
+infringement or for any other reason (not limited to patent issues),
-make, use, sell, offer for sale, import and otherwise run, modify and
+conditions are imposed on you (whether by court order, agreement or
-propagate the contents of its contributor version.
-
-  In the following three paragraphs, a "patent license" is any express
-agreement or commitment, however denominated, not to enforce a patent
-(such as an express permission to practice a patent or covenant not to
-sue for patent infringement).  To "grant" such a patent license to a
-party means to make such an agreement or commitment not to enforce a
-patent against the party.
-
-  If you convey a covered work, knowingly relying on a patent license,
-and the Corresponding Source of the work is not available for anyone
-to copy, free of charge and under the terms of this License, through a
-publicly available network server or other readily accessible means,
-then you must either (1) cause the Corresponding Source to be so
-available, or (2) arrange to deprive yourself of the benefit of the
-patent license for this particular work, or (3) arrange, in a manner
-consistent with the requirements of this License, to extend the patent
-license to downstream recipients.  "Knowingly relying" means you have
-actual knowledge that, but for the patent license, your conveying the
-covered work in a country, or your recipient's use of the covered work
-in a country, would infringe one or more identifiable patents in that
-country that you have reason to believe are valid.
-
-  If, pursuant to or in connection with a single transaction or
-arrangement, you convey, or propagate by procuring conveyance of, a
-covered work, and grant a patent license to some of the parties
-receiving the covered work authorizing them to use, propagate, modify
-or convey a specific copy of the covered work, then the patent license
-you grant is automatically extended to all recipients of the covered
-work and works based on it.
-
-  A patent license is "discriminatory" if it does not include within
-the scope of its coverage, prohibits the exercise of, or is
-conditioned on the non-exercise of one or more of the rights that are
-specifically granted under this License.  You may not convey a covered
-work if you are a party to an arrangement with a third party that is
-in the business of distributing software, under which you make payment
-to the third party based on the extent of your activity of conveying
-the work, and under which the third party grants, to any of the
-parties who would receive the covered work from you, a discriminatory
-patent license (a) in connection with copies of the covered work
-conveyed by you (or copies made from those copies), or (b) primarily
-for and in connection with specific products or compilations that
-contain the covered work, unless you entered into that arrangement,
-or that patent license was granted, prior to 28 March 2007.
-
-  Nothing in this License shall be construed as excluding or limiting
-any implied license or other defenses to infringement that may
-otherwise be available to you under applicable patent law.
-
-  12. No Surrender of Others' Freedom.
-
-  If conditions are imposed on you (whether by court order, agreement or
 otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot convey a
+excuse you from the conditions of this License.  If you cannot
-covered work so as to satisfy simultaneously your obligations under this
+distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you may
+License and any other pertinent obligations, then as a consequence you
-not convey it at all.  For example, if you agree to terms that obligate you
+may not distribute the Program at all.  For example, if a patent
-to collect a royalty for further conveying from those to whom you convey
+license would not permit royalty-free redistribution of the Program by
-the Program, the only way you could satisfy both those terms and this
+all those who receive copies directly or indirectly through you, then
-License would be to refrain entirely from conveying the Program.
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
 
-  13. Use with the GNU Affero General Public License.
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
 
-  Notwithstanding any other provision of this License, you have
+It is not the purpose of this section to induce you to infringe any
-permission to link or combine any covered work with a work licensed
+patents or other property right claims or to contest validity of any
-under version 3 of the GNU Affero General Public License into a single
+such claims; this section has the sole purpose of protecting the
-combined work, and to convey the resulting work.  The terms of this
+integrity of the free software distribution system, which is
-License will continue to apply to the part which is the covered work,
+implemented by public license practices.  Many people have made
-but the special requirements of the GNU Affero General Public License,
+generous contributions to the wide range of software distributed
-section 13, concerning interaction through a network will apply to the
+through that system in reliance on consistent application of that
-combination as such.
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
 
-  14. Revised Versions of this License.
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
 
-  The Free Software Foundation may publish revised and/or new versions of
+  8. If the distribution and/or use of the Program is restricted in
-the GNU General Public License from time to time.  Such new versions will
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
 be similar in spirit to the present version, but may differ in detail to
 address new problems or concerns.
 
-  Each version is given a distinguishing version number.  If the
+Each version is given a distinguishing version number.  If the Program
-Program specifies that a certain numbered version of the GNU General
+specifies a version number of this License which applies to it and "any
-Public License "or any later version" applies to it, you have the
+later version", you have the option of following the terms and conditions
-option of following the terms and conditions either of that numbered
+either of that version or of any later version published by the Free
-version or of any later version published by the Free Software
+Software Foundation.  If the Program does not specify a version number of
-Foundation.  If the Program does not specify a version number of the
+this License, you may choose any version ever published by the Free Software
-GNU General Public License, you may choose any version ever published
+Foundation.
-by the Free Software Foundation.
 
-  If the Program specifies that a proxy can decide which future
+  10. If you wish to incorporate parts of the Program into other free
-versions of the GNU General Public License can be used, that proxy's
+programs whose distribution conditions are different, write to the author
-public statement of acceptance of a version permanently authorizes you
+to ask for permission.  For software which is copyrighted by the Free
-to choose that version for the Program.
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
 
-  Later license versions may give you additional or different
+                            NO WARRANTY
-permissions.  However, no additional obligations are imposed on any
-author or copyright holder as a result of your choosing to follow a
-later version.
 
-  15. Disclaimer of Warranty.
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
 
-  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-
+POSSIBILITY OF SUCH DAMAGES.
-  16. Limitation of Liability.
-
-  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
-THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
-GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
-USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
-DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
-PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
-EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGES.
-
-  17. Interpretation of Sections 15 and 16.
-
-  If the disclaimer of warranty and limitation of liability provided
-above cannot be given local legal effect according to their terms,
-reviewing courts shall apply local law that most closely approximates
-an absolute waiver of all civil liability in connection with the
-Program, unless a warranty or assumption of liability accompanies a
-copy of the Program in return for a fee.
 
                      END OF TERMS AND CONDITIONS
 
@@ -628,15 +287,15 @@ free software which everyone can redistribute and change under these terms.
 
   To do so, attach the following notices to the program.  It is safest
 to attach them to the start of each source file to most effectively
-state the exclusion of warranty; and each file should have at least
+convey the exclusion of warranty; and each file should have at least
 the "copyright" line and a pointer to where the full notice is found.
 
     <one line to give the program's name and a brief idea of what it does.>
     Copyright (C) <year>  <name of author>
 
-    This program is free software: you can redistribute it and/or modify
+    This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
-    the Free Software Foundation, either version 3 of the License, or
+    the Free Software Foundation; either version 2 of the License, or
     (at your option) any later version.
 
     This program is distributed in the hope that it will be useful,
@@ -644,31 +303,37 @@ the "copyright" line and a pointer to where the full notice is found.
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     GNU General Public License for more details.
 
-    You should have received a copy of the GNU General Public License
+    You should have received a copy of the GNU General Public License along
-    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+    with this program; if not, write to the Free Software Foundation, Inc.,
+    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 
 Also add information on how to contact you by electronic and paper mail.
 
-  If the program does terminal interaction, make it output a short
+If the program is interactive, make it output a short notice like this
-notice like this when it starts in an interactive mode:
+when it starts in an interactive mode:
 
-    <program>  Copyright (C) <year>  <name of author>
+    Gnomovision version 69, Copyright (C) year name of author
-    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
     This is free software, and you are welcome to redistribute it
     under certain conditions; type `show c' for details.
 
 The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, your program's commands
+parts of the General Public License.  Of course, the commands you use may
-might be different; for a GUI interface, you would use an "about box".
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
 
-  You should also get your employer (if you work as a programmer) or school,
+You should also get your employer (if you work as a programmer) or your
-if any, to sign a "copyright disclaimer" for the program, if necessary.
+school, if any, to sign a "copyright disclaimer" for the program, if
-For more information on this, and how to apply and follow the GNU GPL, see
+necessary.  Here is a sample; alter the names:
-<http://www.gnu.org/licenses/>.
 
-  The GNU General Public License does not permit incorporating your program
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-into proprietary programs.  If your program is a subroutine library, you
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-may consider it more useful to permit linking proprietary applications with
+
-the library.  If this is what you want to do, use the GNU Lesser General
+  <signature of Ty Coon>, 1 April 1989
-Public License instead of this License.  But first, please read
+  Ty Coon, President of Vice
-<http://www.gnu.org/philosophy/why-not-lgpl.html>.
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.

ChangeLog.md

@@ -1,928 +1,3 @@
-# wolfSSL Release 5.8.4 (Nov. 20, 2025)
-
-Release 5.8.4 has been developed according to wolfSSL's development and QA
-process (see link below) and successfully passed the quality criteria.
-https://www.wolfssl.com/about/wolfssl-software-development-process-quality-assurance
-
-NOTE: * --enable-heapmath is deprecated
-            * MD5 is now disabled by default
-
-PR stands for Pull Request, and PR <NUMBER> references a GitHub pull request number where the code change was added.
-
-## Vulnerabilities
-* [Low CVE-2025-12888] Vulnerability in X25519 constant-time cryptographic implementations due to timing side channels introduced by compiler optimizations and CPU architecture limitations, specifically with the Xtensa-based ESP32 chips. If targeting Xtensa it is recommended to use the low memory implementations of X25519, which is now turned on as the default for Xtensa. Thanks to Adrian Cinal for the report. Fixed in PR 9275.
-
-
-* [Med. CVE-2025-11936] Potential DoS vulnerability due to a memory leak through multiple KeyShareEntry with the same group in malicious TLS 1.3 ClientHello messages. This affects users who are running wolfSSL on the server side with TLS 1.3. Thanks to Jaehun Lee and Kyungmin Bae, Pohang University of Science and Technology (POSTECH) for the report. Fixed in PR 9117.
-
-* [Low CVE-2025-11935] PSK with PFS (Perfect Forward Secrecy) downgrades to PSK without PFS during TLS 1.3 handshake. If the client sends a ClientHello that has a key share extension and the server responds with a ServerHello that does not have a key share extension the connection would previously continue on without using PFS. Thanks to Jaehun Lee from Pohang University of Science and Technology (POSTECH) for the report. Fixed in PR 9112.
-
-* [Low CVE-2025-11934] Signature Algorithm downgrade from ECDSA P521 to P256 during TLS 1.3 handshake. When a client sends ECDSA P521 as the supported signature algorithm the server previously could respond as ECDSA P256 being the accepted signature algorithm and the connection would continue with using ECDSA P256. Thanks to Jaehun Lee from Pohang University of Science and Technology (POSTECH) for the report. Fixed in PR 9113.
-
-
-* [Low CVE-2025-11933] DoS Vulnerability in wolfSSL TLS 1.3 CKS extension parsing. Previously duplicate CKS extensions were not rejected leading to a potential memory leak when processing a ClientHello. Thanks to Jaehun Lee from Pohang University of Science and Technology (POSTECH) for the report. Fixed in PR 9132.
-
-
-* [Low CVE-2025-11931] Integer Underflow Leads to Out-of-Bounds Access in XChaCha20-Poly1305 Decrypt. This issue is hit specifically with a call to the function wc_XChaCha20Poly1305_Decrypt() which is not used with TLS connections, only from direct calls from an application. Thanks to Luigino Camastra from Aisle Research for the report. Fixed in PR 9223.
-
-* [Low CVE-2025-11932] Timing Side-Channel in PSK Binder Verification. The server previously verified the TLS 1.3 PSK binder using a non-constant time method which could potentially leak information about the PSK binder. Thanks to Luigino Camastra from Aisle Research for the report. Fixed in PR 9223.
-
-* [Low CVE-2025-12889] With TLS 1.2 connections a client can use any digest, specifically a weaker digest, rather than those in the CertificateRequest. Thanks to Jaehun Lee from Pohang University of Science and Technology (POSTECH) for the report. Fixed in PR 9395
-
-* [Low CVE-2025-13912] When using the Clang compiler, various optimization levels or flags could result in non-constant-time compiled code. Assembly implementations of the functions in wolfSSL were not affected. The report was done specifically with Clang version 18 but there was shown to be similarities in timing variations when using the optimization levels with Clang 14 and Clang 20.
-
-On the following architectures, the expected constant-time functions were found to have potential timing variations when specific compiler flags or optimization levels were used.
-
-AArch64: Using O3, Ofast, or --enable-nontrivial-unswitch with O1/O2 flags leads to possible timing variations with the software implementations of sp_read_radix, sp_div_2_mod_ct, and sp_addmod_ct. Using O3, O2, Ofast, Os, or Oz with --unroll-force-peel-count=50 leads to possible timing variations with wc_AesGcmDecrypt.
-
-RISC-V: TLS HMAC update/final operations, RSA unpad operations, and DH key pair generation with O1, O2, O3, Ofast, Oz, or Os. wc_AesGcmDecrypt and wc_Chacha_Process with O1, O2, O3, Os, or Ofast. Also SP software operations sp_div_2_mod_ct and sp_addmod_ct using O3 or Ofast.
-
-
-X86_64: TLS HMAC update/final operations and TimingVerifyPad used with verifying the TLS MAC with --fast-isel or --x86-cmov-converter-force-all compile flags. RSA unpad operations, ECC mulmod, and wc_Chacha_Process with the --x86-cmov-converter-force-all flag. DH key agreement, sp_div_2_mod_ct and sp_addmod_ct with O1, O2, O3, Os, or Ofast. wc_AesGcmDecrypt with the compiler flags O2, O3, Os, Ofast, Oz --x86-cmov-converter-force-all | --unroll-force-peel-count=50, or O1 --x86-cmov-converter-force-all.
-
-Thanks to Jing Liu, Zhiyuan Zhang, LUCÍA MARTÍNEZ GAVIER, Gilles Barthe, Marcel Böhme from Max Planck Institute for Security and Privacy (MPI-SP) for the report. Fixed in PR 9148.
-
-## New Features
-* New ML-KEM / ML-DSA APIs and seed/import PKCS8 support; added _new/_delete APIs for ML-KEM/ML-DSA. (PR 9039, 9000, 9049)
-* Initial wolfCrypt FreeBSD kernel module support (PR 9392)
-* Expanded PKCS7/CMS capabilities: decode SymmetricKeyPackage / OneSymmetricKey, add wc_PKCS7_GetEnvelopedDataKariRid, and allow PKCS7 builds with AES keywrap unset. (PR 9018, 9029, 9032)
-* Add custom AES key wrap/unwrap callbacks and crypto callback copy/free operations. (PR 9002, 9309)
-* Add support for certificate_authorities extension in ClientHello and certificate manager CA-type selection/unloading. (PR 9209, 9046)
-* Large expansion of Rust wrapper modules: random, aes, rsa, ecc, dh, sha, hmac, cmac, ed25519/ed448, pbkdf2/PKCS#12, kdf/prf, SRTP KDFs, and conditional compilation options. (PR 9191, 9212, 9273, 9306, 9320, 9328, 9368, 9389, 9357, 9433)
-* Rust: support optional heap and dev_id parameters and enable conditional compilation based on C build options. (PR 9407, 9433)
-* STM32 fixes (benchmarking and platform fixes) and PSoC6 hardware acceleration additions. (PR 9228, 9256, 9185)
-* STM32U5 added support for SAES and DHUK. (PR 9087)
-* Add --enable-curl=tiny option for a smaller build when used with cURL. (PR 9174)
-
-## Improvements / Optimizations
-* Regression test fixes and expansion: TLS 1.3/1.2 tests, ARDUINO examples, libssh2 tests, hostap workflows, and nightly test improvements. (PR 9096, 9141, 9091, 9122, 9388)
-* Improved test ordering and CI test stability (random tests run order changes, FIPS test fixes). (PR 9204, 9257)
-* Docs and readme fixes, docstring updates, AsconAEAD comment placement, and example certificate renewals. (PR 9131, 9293, 9262, 9429)
-* Updated GPL exception lists (GPLv2 and GPLv3 exception updates: add Fetchmail and OpenVPN). (PR 9398, 9413)
-* Introduced WOLFSSL_DEBUG_CERTS and additional debug/logging refinements. (PR 8902, 9055)
-* Expanded crypto-callback support (SHA family, HKDF, SHA-224, sha512_family digest selection) and improved crypto-only build cases. (PR 9070, 9252, 9271, 9100, 9194)
-* AES & HW offload improvements including AES-CTR support in PKCS11 driver and AES ECB offload sizing fix. (PR 9277, 9364)
-* ESP32: PSRAM allocator support and SHA HW fixes for ESP-IDF v6/v5. (PR 8987, 9225, 9264)
-* Renesas FSP / RA examples updated and security-module TLS context improvements. (PR 9047, 9010, 9158, 9150)
-* Broad configure/CMake/Autotools workflow improvements (Apple options tracking, Watcom pinning, Debian packaging, ESP-IDF pinning). (PR 9037, 9167, 9161, 9264)
-* New assembly introspection / performance helpers for RISC-V and PPC32; benchmarking enhancements (cycle counts). (PR 9101, 9317)
-* Update to SGX build for using assembly optimizations. (PR 8463, 9138)
-* Testing with Fil-C compiler version to 0.674 (PR 9396)
-* Refactors and compressing of small stack code (PR 9153)
-
-## Bug Fixes
-* Removed the test feature using popen when defining the macro WOLFSSL_USE_POPEN_HOST and not having HAVE_GETADDRINFO defined, along with having the macro HAVE_HTTP_CLIENT set. There was the potential for vulnerable behavior with the use of popen when the API wolfSSL_BIO_new_connect() was called with this specific build. This exact build configuration is only intended for testing with QEMU and is not enabled with any autoconf/cmake flags. Thanks to linraymond2006 for the report. (PR 9038)
-* Fix for C# wrapper Ed25519 potential crash and heap overwrite with raw public key import when using the API Ed25519ImportPublic.This was a broken API with the C# wrapper that would crash on use. Thanks to Luigino Camastra from Aisle Research for the bug report. (PR 9291)
-* Coverity, cppcheck, MISRA, clang-tidy, ZeroPath and other static-analysis driven fixes across the codebase. (PR 9006, 9078, 9068, 9265, 9324)
-* TLS 1.2/DTLS improvements: client message order checks, DTLS cookie/exchange and replay protections, better DTLS early-data handling. (PR 9387, 9253, 9205, 9367)
-* Improved X.509 & cert handling: allow larger pathLen in Basic Constraints, restore inner server name for ECH, retrying cert candidate chains. (PR 8890, 9234, 8692)
-* Sniffer robustness: fix infinite recursion, better handling of OOO appData and partial overlaps, and improved retransmission detection. (PR 9051, 9106, 9140, 9094)
-* Numerous linuxkm (kernel-mode) fixes, relocation/PIE normalization, and FIPS-related build tweaks across many iterations. (PR 9025, 9035, 9067, 9111, 9121)
-* ML-KEM/Kyber and ML-DSA fixes for out-of-bounds and seed-import correctness; multiple ML-related safety fixes. (PR 9142, 9105, 9439)
-* Avoid uninitialized-variable and GCC warnings; several fixes for undefined-shift/overflow issues. (PR 9020, 9372, 9195)
-* Memory & leak fixes in X509 verification and various struct sizing fixes for WOLFSSL_NO_MALLOC usage. (PR 9258, 9036)
-* Fixed RSA / signing / verify-only warnings allowing WOLFSSL_NO_CT_OPS when WOLFSSL_RSA_VERIFY_ONLY is used and API cleanups for using const. (PR 9031, 9263)
-
-
-# wolfSSL Release 5.8.2 (July 17, 2025)
-
-Release 5.8.2 has been developed according to wolfSSL's development and QA
-process (see link below) and successfully passed the quality criteria.
-https://www.wolfssl.com/about/wolfssl-software-development-process-quality-assurance
-
-NOTE: * wolfSSL is now GPLv3 instead of GPLv2
-            * --enable-heapmath is deprecated
-            * MD5 is now disabled by default
-
-
-PR stands for Pull Request, and PR (NUMBER) references a GitHub pull request number where the code change was added.
-
-## Vulnerabilities
-
-* [Low] There is the potential for a fault injection attack on ECC and Ed25519 verify operations. In versions of wolfSSL 5.7.6 and later the --enable-faultharden option is available to help mitigate against potential fault injection attacks. The mitigation added in wolfSSL version 5.7.6 is to help harden applications relying on the results of the verify operations, such as when used with wolfBoot. If doing ECC or Ed25519 verify operations on a device at risk for fault injection attacks then --enable-faultharden could be used to help mitigate it. Thanks to Kevin from Fraunhofer AISEC for the report.
-
-Hardening option added in PR https://github.com/wolfSSL/wolfssl/pull/8289
-
-
-* [High CVE-2025-7395] When using WOLFSSL_SYS_CA_CERTS and WOLFSSL_APPLE_NATIVE_CERT_VALIDATION on an Apple platform, the native trust store verification routine overrides errors produced elsewhere in the wolfSSL certificate verification process including failures due to hostname matching/SNI, OCSP, CRL, etc. This allows any trusted cert chain to override other errors detected during chain verification that should have resulted in termination of the TLS connection. If building wolfSSL on versions after 5.7.6 and before 5.8.2 with use of the system CA support and the apple native cert validation feature enabled on Apple devices (on by default for non-macOS Apple targets when using autotools or CMake) we recommend updating to the latest version of wolfSSL. Thanks to Thomas Leong from ExpressVPN for the report.
-
-Fixed in PR https://github.com/wolfSSL/wolfssl/pull/8833
-
-
-* [Med. CVE-2025-7394] In the OpenSSL compatibility layer implementation, the function RAND_poll() was not behaving as expected and leading to the potential for predictable values returned from RAND_bytes() after fork() is called. This can lead to weak or predictable random numbers generated in applications that are both using RAND_bytes() and doing fork() operations. This only affects applications explicitly calling RAND_bytes() after fork() and does not affect any internal TLS operations. Although RAND_bytes() documentation in OpenSSL calls out not being safe for use with fork() without first calling RAND_poll(), an additional code change was also made in wolfSSL to make RAND_bytes() behave similar to OpenSSL after a fork() call without calling RAND_poll(). Now the Hash-DRBG used gets reseeded after detecting running in a new process. If making use of RAND_bytes() and calling fork() we recommend updating to the latest version of wolfSSL. Thanks to Per Allansson from Appgate for the report.
-
-Fixed in the following PR’s
-https://github.com/wolfSSL/wolfssl/pull/8849
-https://github.com/wolfSSL/wolfssl/pull/8867
-https://github.com/wolfSSL/wolfssl/pull/8898
-
-
-
-* [Low CVE-2025-7396] In wolfSSL 5.8.0 the option of hardening the C implementation of Curve25519 private key operations was added with the addition of blinding support (https://www.wolfssl.com/curve25519-blinding-support-added-in-wolfssl-5-8-0/). In wolfSSL release 5.8.2 that blinding support is turned on by default in applicable builds. The blinding configure option is only for the base C implementation of Curve25519. It is not needed, or available with; ARM assembly builds, Intel assembly builds, and the small Curve25519 feature. While the attack would be very difficult to execute in practice, enabling blinding provides an additional layer of protection for devices that may be more susceptible to physical access or side-channel observation. Thanks to Arnaud Varillon, Laurent Sauvage, and Allan Delautre from Telecom Paris for the report.
-
-Blinding enabled by default in PR https://github.com/wolfSSL/wolfssl/pull/8736
-
-
-## New Features
-* Multiple sessions are now supported in the sniffer due to the removal of a cached check. (PR #8723)
-* New API ssl_RemoveSession() has been implemented for sniffer cleanup operations. (PR #8768)
-* The new ASN X509 API, `wc_GetSubjectPubKeyInfoDerFromCert`, has been introduced for retrieving public key information from certificates. (PR #8758)
-* `wc_PKCS12_create()` has been enhanced to support PBE_AES(256|128)_CBC key and certificate encryptions. (PR #8782, PR #8822, PR #8859)
-* `wc_PKCS7_DecodeEncryptedKeyPackage()` has been added for decoding encrypted key packages. (PR #8976)
-* All AES, SHA, and HMAC functionality has been implemented within the Linux Kernel Module. (PR #8998)
-* Additions to the compatibility layer have been introduced for X.509 extensions and RSA PSS. Adding the API i2d_PrivateKey_bio, BN_ucmp and X509v3_get_ext_by_NID. (PR #8897)
-* Added support for STM32N6. (PR #8914)
-* Implemented SHA-256 for PPC 32 assembly. (PR #8894)
-
-## Improvements / Optimizations
-
-### Linux Kernel Module (LinuxKM) Enhancements
-* Registered DH and FFDHE for the Linux Kernel Module. (PR #8707)
-* Implemented fixes for standard RNG in the Linux Kernel Module. (PR #8718)
-* Added an ECDSA workaround for the Linux Kernel Module. (PR #8727)
-* Added more PKCS1 pad SHA variants for RSA in the Linux Kernel Module. (PR #8730)
-* Set default priority to 100000 for LKCAPI in the Linux Kernel Module. (PR #8740)
-* Ensured ECDH never has FIPS enabled in the Linux Kernel Module. (PR #8751)
-* Implemented further Linux Kernel Module and SP tweaks. (PR #8773)
-* Added sig_alg support for Linux 6.13 RSA in the Linux Kernel Module. (PR #8796)
-* Optimized wc_linuxkm_fpu_state_assoc. (PR #8828)
-* Ensured DRBG is multithread-round-1 in the Linux Kernel Module. (PR #8840)
-* Prevented toggling of fips_enabled in the Linux Kernel Module. (PR #8873)
-* Refactored drbg_ctx clear in the Linux Kernel Module. (PR #8876)
-* Set sig_alg max_size and digest_size callbacks for RSA in the Linux Kernel Module. (PR #8915)
-* Added get_random_bytes for the Linux Kernel Module. (PR #8943)
-* Implemented distro fix for the Linux Kernel Module. (PR #8994)
-* Fixed page-flags-h in the Linux Kernel Module. (PR #9001)
-* Added MODULE_LICENSE for the Linux Kernel Module. (PR #9005)
-
-### Post-Quantum Cryptography (PQC) & Asymmetric Algorithms
-* Kyber has been updated to the MLKEM ARM file for Zephyr (PR #8781)
-* Backward compatibility has been implemented for ML_KEM IDs (PR #8827)
-* ASN.1 is now ensured to be enabled when only building PQ algorithms (PR #8884)
-* Building LMS with verify-only has been fixed (PR #8913)
-* Parameters for LMS SHA-256_192 have been corrected (PR #8912)
-* State can now be saved with the private key for LMS (PR #8836)
-* Support for OpenSSL format has been added for ML-DSA/Dilithium (PR #8947)
-* `dilithium_coeff_eta2[]` has been explicitly declared as signed (PR #8955)
-
-### Build System & Portability
-* Prepared for the inclusion of v5.8.0 in the Ada Alire index. (PR #8714)
-* Introduced a new build option to allow reuse of the Windows crypt provider handle. (PR #8706)
-* Introduced general fixes for various build configurations. (PR #8763)
-* Made improvements for portability using older GCC 4.8.2. (PR #8753)
-* Macro guards updated to allow tests to build with opensslall and no server. (PR #8776)
-* Added a check for STDC_NO_ATOMICS macro before use of atomics. (PR #8885)
-* Introduced CMakePresets.json and CMakeSettings.json. (PR #8905)
-* Added an option to not use constant time code with min/max. (PR #8830)
-* Implemented proper MacOS dispatch for conditional signal/wait. (PR #8928)
-* Disabled MD5 by default for both general and CMake builds. (PR #8895, PR #8948)
-* Improved to allow building OPENSSL_EXTRA without KEEP_PEER_CERT. (PR #8926)
-* Added introspection for Intel and ARM assembly speedups. (PR #8954)
-* Fixed cURL config to set HAVE_EX_DATA and HAVE_ALPN. (PR #8973)
-* Moved FREESCALE forced algorithm HAVE_ECC to IDE/MQX/user_settings.h. (PR #8977)
-
-### Testing & Debugging
-* Fixed the exit status for testwolfcrypt. (PR #8762)
-* Added WOLFSSL_DEBUG_PRINTF and WOLFSSL_DEBUG_CERTIFICATE_LOADS for improved debugging output. (PR #8769, PR #8770)
-* Guarded some benchmark tests with NO_SW_BENCH. (PR #8760)
-* Added an additional unit test for wolfcrypt PKCS12 file to improve code coverage. (PR #8831)
-* Added an additional unit test for increased DH code coverage. (PR #8837)
-* Adjusted for warnings with NO_TLS build and added GitHub actions test. (PR #8851)
-* Added additional compatibility layer RAND tests. (PR #8852)
-* Added an API unit test for checking domain name. (PR #8863)
-* Added bind v9.18.33 testing. (PR #8888)
-* Fixed issue with benchmark help options and descriptions not lining up. (PR #8957)
-
-### Certificates & ASN.1
-* Changed the algorithm for sum in ASN.1 OIDs. (PR #8655)
-* Updated PKCS7 to use X509 STORE for internal verification. (PR #8748)
-* Improved handling of temporary buffer size for X509 extension printing. (PR #8710)
-* Marked IP address as WOLFSSL_V_ASN1_OCTET_STRING for ALT_NAMES_OID. (PR #8842)
-* Fixed printing empty names in certificates. (PR #8880)
-* Allowed CA:FALSE on wolftpm. (PR #8925)
-* Fixed several inconsistent function prototype parameter names in wc/asn. (PR #8949)
-* Accounted for custom extensions when creating a Cert from a WOLFSSL_X509. (PR #8960)
-
-### TLS/DTLS & Handshake
-* Checked group correctness outside of TLS 1.3 too for TLSX_UseSupportedCurve. (PR #8785)
-* Dropped records that span datagrams in DTLS. (PR #8642)
-* Implemented WC_NID_netscape_cert_type. (PR #8800)
-* Refactored GetHandshakeHeader/GetHandShakeHeader into one function. (PR #8787)
-* Correctly set the current peer in dtlsProcessPendingPeer. (PR #8848)
-* Fixed set_groups for TLS. (PR #8824)
-* Allowed trusted_ca_keys with TLSv1.3. (PR #8860)
-* Moved Dtls13NewEpoch into DeriveTls13Keys. (PR #8858)
-* Cleared tls1_3 on downgrade. (PR #8861)
-* Always sent ACKs on detected retransmission for DTLS1.3. (PR #8882)
-* Removed DTLS from echo examples. (PR #8889)
-* Recalculated suites at SSL initialization. (PR #8757)
-* No longer using BIO for ALPN. (PR #8969)
-* Fixed wolfSSL_BIO_new_connect's handling of IPV6 addresses. (PR #8815)
-* Memory Management & Optimizations
-* Performed small stack refactors, improved stack size with mlkem and dilithium, and added additional tests. (PR #8779)
-* Implemented FREE_MP_INT_SIZE in heap math. (PR #8881)
-* Detected correct MAX_ENCODED_SIG_SZ based on max support in math lib. (PR #8931)
-* Fixed improper access of sp_int_minimal using sp_int. (PR #8985)
-
-### Cryptography & Hash Functions
-* Implemented WC_SIPHASH_NO_ASM for not using assembly optimizations with siphash. (PR #8789, PR #8791)
-* Added missing DH_MAX_SIZE define for FIPS and corrected wolfssl.rc FILETYPE to VFT_DLL. (PR #8794)
-* Implemented WC_SHA3_NO_ASM for not using assembly with SHA3. (PR #8817)
-* Improved Aarch64 XFENCE. (PR #8832)
-* Omitted frame pointer for ARM32/Thumb2/RISC-V 64 assembly. (PR #8893)
-* Fixed branch instruction in ARMv7a ASM. (PR #8933)
-* Enabled EVP HMAC to work with WOLFSSL_HMAC_COPY_HASH. (PR #8944)
-* Platform-Specific & Hardware Integration
-* Added HAVE_HKDF for wolfssl_test and explicit support for ESP32P4. (PR #8742)
-* Corrected Espressif default time setting. (PR #8829)
-* Made wc_tsip_* APIs public. (PR #8717)
-* Improved PlatformIO Certificate Bundle Support. (PR #8847)
-* Fixed the TSIP TLS example program. (PR #8857)
-* Added crypto callback functions for TROPIC01 secure element. (PR #8812)
-* Added Renesas RX TSIP AES CTR support. (PR #8854)
-* Fixed TSIP port using crypto callback. (PR #8937)
-
-### General Improvements & Refactoring
-* Attempted wolfssl_read_bio_file in read_bio even when XFSEEK is available. (PR #8703)
-* Refactored GetHandshakeHeader/GetHandShakeHeader into one function. (PR #8787)
-* Updated libspdm from 3.3.0 to 3.7.0. (PR #8906)
-* Fixed missing dashes on the end of header and footer for Falcon PEM key. (PR #8904)
-* Fixed minor code typos for macos signal and types.h max block size. (PR #8934)
-* Make the API wolfSSL_X509_STORE_CTX_get_error accessible to more build configurations for ease of getting the "store" error code and depth with certificate failure callback implementations. (PR #8903)
-
-## Bug Fixes
-* Fixed issues to support _WIN32_WCE (VS 2008 with WinCE 6.0/7.0). (PR #8709)
-* Fixed STM32 Hash with IRQ enabled. (PR #8705)
-* Fixed raw hash when using crypto instructions on RISC-V 64-bit. (PR #8733)
-* Fixed ECDH decode secret in the Linux Kernel Module. (PR #8729)
-* Passed in the correct hash type to wolfSSL_RSA_verify_ex. (PR #8726)
-* Fixed issues for Intel QuickAssist latest driver (4.28). (PR #8728)
-* Speculative fix for CodeSonar overflow issue in ssl_certman.c. (PR #8715)
-* Fixed Arduino progmem print and AVR WOLFSSL_USER_IO. (PR #8668)
-* Correctly advanced the index in wc_HKDF_Expand_ex. (PR #8737)
-* Fixed STM32 hash status check logic, including NO_AES_192 and NO_AES_256. (PR #8732)
-* Added missing call to wolfSSL_RefFree in FreeCRL to prevent memory leaks. (PR #8750)
-* Fixed sanity check on --group with unit test app and null sanity check with des decrypt. (PR #8711)
-* Fixed Curve25519 and static ephemeral issue with blinding. (PR #8766)
-* Fixed edge case issue with STM32 AES GCM auth padding. (PR #8745)
-* Removed redefinition of MlKemKey and fixed build issue in benchmark. (PR #8755)
-* Used proper heap hint when freeing CRL in error case. (PR #8713)
-* Added support for no malloc with wc_CheckCertSigPubKey. (PR #8725)
-* Fixed C# wrapper Release build. (PR #8802)
-* Handled malformed CCS and CCS before CH in TLS1.3. (PR #8788)
-* Fixed ML-DSA with WOLFSSL_DILITHIUM_NO_SIGN. (PR #8798)
-* Fixed AesGcmCrypt_1 no-stream in the Linux Kernel Module. (PR #8814)
-* Fixed return value usage for crypto_sig_sign in the Linux Kernel Module. (PR #8816)
-* Fixed issue with CSharp and Windows CE with conversion of ASCII and Unicode. (PR #8799)
-* Fixed Renesas SCE on RA6M4. (PR #8838)
-* Fixed tests for different configs for ML-DSA. (PR #8865)
-* Fixed bug in ParseCRL_Extensions around the size of a CRL number handled and CRL number OID. (PR #8587)
-* Fixed uninitialized wc_FreeRng in prime_test. (PR #8886)
-* Fixed ECC configuration issues with ECC verify only and no RNG. (PR #8901)
-* Fixed issues with max size, openssl.test netcat, and clang-tidy. (PR #8909)
-* Fixed for casting down and uninit issues in Dilithium/ML-DSA. (PR #8868)
-* Fixed memory allocation failure testing and related unit test cases. (PR #8945, PR #8952)
-* Fixed build issue with ML-DSA 44 only. (PR #8981)
-* Fixed possible memory leak with X509 reference counter when using x509small. (PR #8982)
-
-
-# wolfSSL Release 5.8.0 (Apr 24, 2025)
-
-Release 5.8.0 has been developed according to wolfSSL's development and QA
-process (see link below) and successfully passed the quality criteria.
-https://www.wolfssl.com/about/wolfssl-software-development-process-quality-assurance
-
-NOTE: * --enable-heapmath is deprecated
-
-PR stands for Pull Request, and PR (NUMBER) references a GitHub pull request
- number where the code change was added.
-
-
-## New Feature Additions
-* Algorithm registration in the Linux kernel module for all supported FIPS AES,
- SHA, HMAC, ECDSA, ECDH, and RSA modes, key sizes, and digest sizes.
-* Implemented various fixes to support building for Open Watcom including OS/2
- support and Open Watcom 1.9 compatibility (PR 8505, 8484)
-* Added support for STM32H7S (tested on NUCLEO-H7S3L8) (PR 8488)
-* Added support for STM32WBA (PR 8550)
-* Added Extended Master Secret Generation Callback to the --enable-pkcallbacks
- build (PR 8303)
-* Implement AES-CTS (configure flag --enable-aescts) in wolfCrypt (PR 8594)
-* Added support for libimobiledevice commit 860ffb (PR 8373)
-* Initial ASCON hash256 and AEAD128 support based on NIST SP 800-232 IPD
- (PR 8307)
-* Added blinding option when using a Curve25519 private key by defining the
- macro WOLFSSL_CURVE25519_BLINDING (PR 8392)
-
-
-## Linux Kernel Module
-* Production-ready LKCAPI registration for cbc(aes), cfb(aes), gcm(aes),
- rfc4106 (gcm(aes)), ctr(aes), ofb(aes), and ecb(aes), ECDSA with P192, P256,
- P384, and P521 curves, ECDH with P192, P256, and P384 curves, and RSA with
- bare and PKCS1 padding
-* Various fixes for LKCAPI wrapper for AES-CBC and AES-CFB (PR 8534, 8552)
-* Adds support for the legacy one-shot AES-GCM back end (PR 8614, 8567) for
- compatibility with FIPS 140-3 Cert #4718.
-* On kernel >=6.8, for CONFIG_FORTIFY_SOURCE, use 5-arg fortify_panic() override
- macro (PR 8654)
-* Update calls to scatterwalk_map() and scatterwalk_unmap() for linux commit
- 7450ebd29c (merged for Linux 6.15) (PR 8667)
-* Inhibit LINUXKM_LKCAPI_REGISTER_ECDH on kernel <5.13 (PR 8673)
-* Fix for uninitialized build error with fedora (PR 8569)
-* Register ecdsa, ecdh, and rsa for use with linux kernel crypto (PR 8637, 8663,
- 8646)
-* Added force zero shared secret buffer, and clear of old key with ecdh
- (PR 8685)
-* Update fips-check.sh script to pickup XTS streaming support on aarch64 and
- disable XTS-384 as an allowed use in FIPS mode (PR 8509, 8546)
-
-
-## Enhancements and Optimizations
-
-### Security & Cryptography
-* Add constant-time implementation improvements for encoding functions. We thank
- Zhiyuan and Gilles for sharing a new constant-time analysis tool (CT-LLVM) and
- reporting several non-constant-time implementations. (PR 8396, 8617)
-* Additional support for PKCS7 verify and decode with indefinite lengths
- (PR 8520, 834, 8645)
-* Add more PQC hybrid key exchange algorithms such as support for combinations
- with X25519 and X448 enabling compatibility with the PQC key exchange support
- in Chromium browsers and Mozilla Firefox (PR 7821)
-* Add short-circuit comparisons to DH key validation for RFC 7919 parameters
- (PR 8335)
-* Improve FIPS compatibility with various build configurations for more resource
- constrained builds (PR 8370)
-* Added option to disable ECC public key order checking (PR 8581)
-* Allow critical alt and basic constraints extensions (PR 8542)
-* New codepoint for MLDSA to help with interoperability (PR 8393)
-* Add support for parsing trusted PEM certs having the header
- “BEGIN_TRUSTED_CERT” (PR 8400)
-* Add support for parsing only of DoD certificate policy and Comodo Ltd PKI OIDs
- (PR 8599, 8686)
-* Update ssl code in `src/*.c` to be consistent with wolfcrypt/src/asn.c
- handling of ML_DSA vs Dilithium and add dual alg. test (PR 8360, 8425)
-
-### Build System, Configuration, CI & Protocols
-* Internal refactor for include of config.h and when building with
- BUILDING_WOLFSSL macro. This refactor will give a warning of “deprecated
- function” when trying to improperly use an internal API of wolfSSL in an
- external application. (PR 8640, 8647, 8660, 8662, 8664)
-* Add WOLFSSL_CLU option to CMakeLists.txt (PR 8548)
-* Add CMake and Zephyr support for XMSS and LMS (PR 8494)
-* Added GitHub CI for CMake builds (PR 8439)
-* Added necessary macros when building wolfTPM Zephyr with wolfSSL (PR 8382)
-* Add MSYS2 build continuous integration test (PR 8504)
-* Update DevKitPro doc to list calico dependency with build commands (PR 8607)
-* Conversion compiler warning fixes and additional continuous integration test
- added (PR 8538)
-* Enable DTLS 1.3 by default in --enable-jni builds (PR 8481)
-* Enabled TLS 1.3 middlebox compatibility by default for --enable-jni builds
- (PR 8526)
-
-### Performance Improvements
-* Performance improvements AES-GCM and HMAC (in/out hash copy) (PR 8429)
-* LMS fixes and improvements adding API to get Key ID from raw private key,
- change to identifiers to match standard, and fix for when
- WOLFSSL_LMS_MAX_LEVELS is 1 (PR 8390, 8684, 8613, 8623)
-* ML-KEM/Kyber improvements and fixes; no malloc builds, small memory usage,
- performance improvement, fix for big-endian (PR 8397, 8412, 8436, 8467, 8619,
- 8622, 8588)
-* Performance improvements for AES-GCM and when doing multiple HMAC operations
- (PR 8445)
-
-### Assembly and Platform-Specific Enhancements
-* Poly1305 arm assembly changes adding ARM32 NEON implementation and fix for
- Aarch64 use (PR 8344, 8561, 8671)
-* Aarch64 assembly enhancement to use more CPU features, fix for FreeBSD/OpenBSD
- (PR 8325, 8348)
-* Only perform ARM assembly CPUID checks if support was enabled at build time
- (PR 8566)
-* Optimizations for ARM32 assembly instructions on platforms less than ARMv7
- (PR 8395)
-* Improve MSVC feature detection for static assert macros (PR 8440)
-* Improve Espressif make and CMake for ESP8266 and ESP32 series (PR 8402)
-* Espressif updates for Kconfig, ESP32P4 and adding a sample user_settings.h
- (PR 8422, PR 8641)
-
-### OpenSSL Compatibility Layer
-* Modification to the push/pop to/from in OpenSSL compatibility layer. This is
- a pretty major API change in the OpenSSL compatibility stack functions.
- Previously the API would push/pop from the beginning of the list but now they
- operate on the tail of the list. This matters when using the sk_value with
- index values. (PR 8616)
-* OpenSSL Compat Layer: OCSP response improvements (PR 8408, 8498)
-* Expand the OpenSSL compatibility layer to include an implementation of
- BN_CTX_get (PR 8388)
-
-### API Additions and Modifications
-* Refactor Hpke to allow multiple uses of a context instead of just one shot
- mode (PR 6805)
-* Add support for PSK client callback with Ada and use with Alire (thanks
- @mgrojo, PR 8332, 8606)
-* Change wolfSSL_CTX_GenerateEchConfig to generate multiple configs and add
- functions wolfSSL_CTX_SetEchConfigs and wolfSSL_CTX_SetEchConfigsBase64 to
- rotate the server's echConfigs (PR 8556)
-* Added the public API wc_PkcsPad to do PKCS padding (PR 8502)
-* Add NULL_CIPHER_TYPE support to wolfSSL_EVP_CipherUpdate (PR 8518)
-* Update Kyber APIs to ML-KEM APIs (PR 8536)
-* Add option to disallow automatic use of "default" devId using the macro
- WC_NO_DEFAULT_DEVID (PR 8555)
-* Detect unknown key format on ProcessBufferTryDecode() and handle RSA-PSSk
- format (PR 8630)
-
-### Porting and Language Support
-* Update Python port to support version 3.12.6 (PR 8345)
-* New additions for MAXQ with wolfPKCS11 (PR 8343)
-* Port to ntp 4.2.8p17 additions (PR 8324)
-* Add version 0.9.14 to tested libvncserver builds (PR 8337)
-
-### General Improvements and Cleanups
-* Cleanups for STM32 AES GCM (PR 8584)
-* Improvements to isascii() and the CMake key log option (PR 8596)
-* Arduino documentation updates, comments and spelling corrections (PR 8381,
- 8384, 8514)
-* Expanding builds with WOLFSSL_NO_REALLOC for use with --enable-opensslall and
- --enable-all builds (PR 8369, 8371)
-
-
-## Fixes
-* Fix a use after free caused by an early free on error in the X509 store
- (PR 8449)
-* Fix to account for existing PKCS8 header with
- wolfSSL_PEM_write_PKCS8PrivateKey (PR 8612)
-* Fixed failing CMake build issue when standard threads support is not found in
- the system (PR 8485)
-* Fix segmentation fault in SHA-512 implementation for AVX512 targets built with
- gcc -march=native -O2 (PR 8329)
-* Fix Windows socket API compatibility warning with mingw32 build (PR 8424)
-* Fix potential null pointer increments in cipher list parsing (PR 8420)
-* Fix for possible stack buffer overflow read with wolfSSL_SMIME_write_PKCS7.
- Thanks to the team at Code Intelligence for the report. (PR 8466)
-* Fix AES ECB implementation for Aarch64 ARM assembly (PR 8379)
-* Fixed building with VS2008 and .NET 3.5 (PR 8621)
-* Fixed possible error case memory leaks in CRL and EVP_Sign_Final (PR 8447)
-* Fixed SSL_set_mtu compatibility function return code (PR 8330)
-* Fixed Renesas RX TSIP (PR 8595)
-* Fixed ECC non-blocking tests (PR 8533)
-* Fixed CMake on MINGW and MSYS (PR 8377)
-* Fixed Watcom compiler and added new CI test (PR 8391)
-* Fixed STM32 PKA ECC 521-bit support (PR 8450)
-* Fixed STM32 PKA with P521 and shared secret (PR 8601)
-* Fixed crypto callback macro guards with `DEBUG_CRYPTOCB` (PR 8602)
-* Fix outlen return for RSA private decrypt with WOLF_CRYPTO_CB_RSA_PAD
- (PR 8575)
-* Additional sanity check on r and s lengths in DecodeECC_DSA_Sig_Bin (PR 8350)
-* Fix compat. layer ASN1_TIME_diff to accept NULL output params (PR 8407)
-* Fix CMake lean_tls build (PR 8460)
-* Fix for QUIC callback failure (PR 8475)
-* Fix missing alert types in AlertTypeToString for print out with debugging
- enabled (PR 8572)
-* Fixes for MSVS build issues with PQC configure (PR 8568)
-* Fix for SE050 port and minor improvements (PR 8431, 8437)
-* Fix for missing rewind function in zephyr and add missing files for compiling
- with assembly optimizations (PR 8531, 8541)
-* Fix for quic_record_append to return the correct code (PR 8340, 8358)
-* Fixes for Bind 9.18.28 port (PR 8331)
-* Fix to adhere more closely with RFC8446 Appendix D and set haveEMS when
- negotiating TLS 1.3 (PR 8487)
-* Fix to properly check for signature_algorithms from the client in a TLS 1.3
- server (PR 8356)
-* Fix for when BIO data is less than seq buffer size. Thanks to the team at Code
- Intelligence for the report (PR 8426)
-* ARM32/Thumb2 fixes for WOLFSSL_NO_VAR_ASSIGN_REG and td4 variable declarations
- (PR 8590, 8635)
-* Fix for Intel AVX1/SSE2 assembly to not use vzeroupper instructions unless ymm
- or zmm registers are used (PR 8479)
-* Entropy MemUse fix for when block size less than update bits (PR 8675)
-
-
-# wolfSSL Release 5.7.6 (Dec 31, 2024)
-
-Release 5.7.6 has been developed according to wolfSSL's development and QA
-process (see link below) and successfully passed the quality criteria.
-https://www.wolfssl.com/about/wolfssl-software-development-process-quality-assurance
-
-NOTE:
- * --enable-heapmath is deprecated.
- * In this release, the default cipher suite preference is updated to prioritize
- TLS_AES_256_GCM_SHA384 over TLS_AES_128_GCM_SHA256 when enabled.
- * This release adds a sanity check for including wolfssl/options.h or
- user_settings.h.
-
-
-PR stands for Pull Request, and PR (NUMBER) references a GitHub pull request
- number where the code change was added.
-
-
-## Vulnerabilities
-* [Med] An OCSP (non stapling) issue was introduced in wolfSSL version 5.7.4
- when performing OCSP requests for intermediate certificates in a certificate
- chain. This affects only TLS 1.3 connections on the server side. It would not
- impact other TLS protocol versions or connections that are not using the
- traditional OCSP implementation. (Fix in pull request 8115)
-
-
-## New Feature Additions
-* Add support for RP2350 and improve RP2040 support, both with RNG optimizations
- (PR 8153)
-* Add support for STM32MP135F, including STM32CubeIDE support and HAL support
- for SHA2/SHA3/AES/RNG/ECC optimizations. (PR 8223, 8231, 8241)
-* Implement Renesas TSIP RSA Public Enc/Private support (PR 8122)
-* Add support for Fedora/RedHat system-wide crypto-policies (PR 8205)
-* Curve25519 generic keyparsing API added with  wc_Curve25519KeyToDer and
- wc_Curve25519KeyDecode (PR 8129)
-* CRL improvements and update callback, added the functions
- wolfSSL_CertManagerGetCRLInfo and wolfSSL_CertManagerSetCRLUpdate_Cb (PR 8006)
-* For DTLS, add server-side stateless and CID quality-of-life API. (PR 8224)
-
-
-## Enhancements and Optimizations
-* Add a CMake dependency check for pthreads when required. (PR 8162)
-* Update OS_Seed declarations for legacy compilers and FIPS modules (boundary
- not affected). (PR 8170)
-* Enable WOLFSSL_ALWAYS_KEEP_SNI by default when using --enable-jni. (PR 8283)
-* Change the default cipher suite preference, prioritizing
- TLS_AES_256_GCM_SHA384 over TLS_AES_128_GCM_SHA256. (PR 7771)
-* Add SRTP-KDF (FIPS module v6.0.0) to checkout script for release bundling
- (PR 8215)
-* Make library build when no hardware crypto available for Aarch64 (PR 8293)
-* Update assembly code to avoid `uint*_t` types for better compatibility with
- older C standards. (PR 8133)
-* Add initial documentation for writing ASN template code to decode BER/DER.
- (PR 8120)
-* Perform full reduction in sc_muladd for EdDSA with Curve448 (PR 8276)
-* Allow SHA-3 hardware cryptography instructions to be explicitly not used in
- MacOS builds (PR 8282)
-* Make Kyber and ML-KEM available individually and together. (PR 8143)
-* Update configuration options to include Kyber/ML-KEM and fix defines used in
- wolfSSL_get_curve_name. (PR 8183)
-* Make GetShortInt available with WOLFSSL_ASN_EXTRA (PR 8149)
-* Improved test coverage and minor improvements of X509 (PR 8176)
-* Add sanity checks for configuration methods, ensuring the inclusion of
- wolfssl/options.h or user_settings.h. (PR 8262)
-* Enable support for building without TLS (NO_TLS). Provides reduced code size
- option for non-TLS users who want features like the certificate manager or
- compatibility layer. (PR 8273)
-* Exposed get_verify functions with OPENSSL_EXTRA. (PR 8258)
-* ML-DSA/Dilithium: obtain security level from DER when decoding (PR 8177)
-* Implementation for using PKCS11 to retrieve certificate for SSL CTX (PR 8267)
-* Add support for the RFC822 Mailbox attribute (PR 8280)
-* Initialize variables and adjust types resolve warnings with Visual Studio in
- Windows builds. (PR 8181)
-* Refactors and expansion of opensslcoexist build (PR 8132, 8216, 8230)
-* Add DTLS 1.3 interoperability, libspdm and DTLS CID interoperability tests
- (PR 8261, 8255, 8245)
-* Remove trailing error exit code in wolfSSL install setup script (PR 8189)
-* Update Arduino files for wolfssl 5.7.4 (PR 8219)
-* Improve Espressif SHA HW/SW mutex messages (PR 8225)
-* Apply post-5.7.4 release updates for Espressif Managed Component examples
- (PR 8251)
-* Expansion of c89 conformance (PR 8164)
-* Added configure option for additional sanity checks with --enable-faultharden
- (PR 8289)
-* Aarch64 ASM additions to check CPU features before hardware crypto instruction
- use (PR 8314)
-
-
-## Fixes
-* Fix a memory issue when using the compatibility layer with
- WOLFSSL_GENERAL_NAME and handling registered ID types. (PR 8155)
-* Fix a build issue with signature fault hardening when using public key
- callbacks (HAVE_PK_CALLBACKS). (PR 8287)
-* Fix for handling heap hint pointer properly when managing multiple WOLFSSL_CTX
- objects and free’ing one of them (PR 8180)
-* Fix potential memory leak in error case with Aria. (PR 8268)
-* Fix Set_Verify flag behaviour on Ada wrapper. (PR 8256)
-* Fix a compilation error with the NO_WOLFSSL_DIR flag. (PR 8294)
-* Resolve a corner case for Poly1305 assembly code on Aarch64. (PR 8275)
-* Fix incorrect version setting in CSRs. (PR 8136)
-* Correct debugging output for cryptodev. (PR 8202)
-* Fix for benchmark application use with /dev/crypto GMAC auth error due to size
- of AAD (PR 8210)
-* Add missing checks for the initialization of sp_int/mp_int with DSA to free
- memory properly in error cases. (PR 8209)
-* Fix return value of wolfSSL_CTX_set_tlsext_use_srtp (8252)
-* Check Root CA by Renesas TSIP before adding it to ca-table (PR 8101)
-* Prevent adding a certificate to the CA cache for Renesas builds if it does not
- set CA:TRUE in basic constraints. (PR 8060)
-* Fix attribute certificate holder entityName parsing. (PR 8166)
-* Resolve build issues for configurations without any wolfSSL/openssl
- compatibility layer headers. (PR 8182)
-* Fix for building SP RSA small and RSA public only (PR 8235)
-* Fix for Renesas RX TSIP RSA Sign/Verify with wolfCrypt only (PR 8206)
-* Fix to ensure all files have settings.h included (like wc_lms.c) and guards
- for building all `*.c` files (PR 8257 and PR 8140)
-* Fix x86 target build issues in Visual Studio for non-Windows operating
- systems. (PR 8098)
-* Fix wolfSSL_X509_STORE_get0_objects to handle no CA (PR 8226)
-* Properly handle reference counting when adding to the X509 store. (PR 8233)
-* Fix for various typos and improper size used with FreeRTOS_bind in the Renesas
- example. Thanks to Hongbo for the report on example issues. (PR 7537)
-* Fix for potential heap use after free with wolfSSL_PEM_read_bio_PrivateKey.
- Thanks to Peter for the issue reported. (PR 8139)
-
-
-# wolfSSL Release 5.7.4 (Oct 24, 2024)
-
-Release 5.7.4 has been developed according to wolfSSL's development and QA
-process (see link below) and successfully passed the quality criteria.
-https://www.wolfssl.com/about/wolfssl-software-development-process-quality-assurance
-
-NOTE: * --enable-heapmath is being deprecated and will be removed by end of 2024
-
-PR stands for Pull Request, and PR (NUMBER) references a GitHub pull request
- number where the code change was added.
-
-
-## Vulnerabilities
-* [Low] When the OpenSSL compatibility layer is enabled, certificate
- verification behaved differently in wolfSSL than OpenSSL, in the
- X509_STORE_add_cert() and X509_STORE_load_locations() implementations.
- Previously, in cases where an application explicitly loaded an intermediate
- certificate, wolfSSL was verifying only up to that intermediate certificate,
- rather than verifying up to the root CA. This only affects use cases where the
- API is called directly, and does not affect TLS connections. Users that call
- the API X509_STORE_add_cert() or X509_STORE_load_locations() directly in their
- applications are recommended to update the version of wolfSSL used or to have
- additional sanity checks on certificates loaded into the X509_STORE when
- verifying a certificate. (https://github.com/wolfSSL/wolfssl/pull/8087)
-
-
-## PQC TLS Experimental Build Fix
-* When using TLS with post quantum algorithms enabled, the connection uses a
- smaller EC curve than agreed on. Users building with --enable-experimental and
- enabling PQC cipher suites with TLS connections are recommended to update the
- version of wolfSSL used. Thanks to Daniel Correa for the report.
- (https://github.com/wolfSSL/wolfssl/pull/8084)
-
-
-## New Feature Additions
-* RISC-V 64 new assembly optimizations added for SHA-256, SHA-512, ChaCha20,
- Poly1305, and SHA-3 (PR 7758,7833,7818,7873,7916)
-* Implement support for Connection ID (CID) with DTLS 1.2 (PR 7995)
-* Add support for (DevkitPro)libnds (PR 7990)
-* Add port for Mosquitto OSP (Open Source Project) (PR 6460)
-* Add port for init sssd (PR 7781)
-* Add port for eXosip2 (PR 7648)
-* Add support for STM32G4 (PR 7997)
-* Add support for MAX32665 and MAX32666 TPU HW and ARM ASM Crypto Callback
- Support (PR 7777)
-* Add support for building wolfSSL to be used in libspdm (PR 7869)
-* Add port for use with Nucleus Plus 2.3 (PR 7732)
-* Initial support for RFC5755 x509 attribute certificates (acerts). Enabled with
- --enable-acert (PR 7926)
-* PKCS#11 RSA Padding offload allows tokens to perform CKM_RSA_PKCS
- (sign/encrypt), CKM_RSA_PKCS_PSS (sign), and CKM_RSA_PKCS_OAEP (encrypt).
- (PR 7750)
-* Added “new” and “delete” style functions for heap/pool allocation and freeing
- of low level crypto structures (PR 3166 and 8089)
-
-
-## Enhancements and Optimizations
-* Increase default max alt. names from 128 to 1024 (PR 7762)
-* Added new constant time DH agree function wc_DhAgree_ct (PR 7802)
-* Expanded compatibility layer with the API EVP_PKEY_is_a (PR 7804)
-* Add option to disable cryptocb test software test using
- --disable-cryptocb-sw-test (PR 7862)
-* Add a call to certificate verify callback before checking certificate dates
- (PR 7895)
-* Expanded algorithms supported with the wolfCrypt CSharp wrapper. Adding
- support for RNG, ECC(ECIES and ECDHE), RSA, ED25519/Curve25519, AES-GCM, and
- Hashing (PR 3166)
-* Expand MMCAU support for use with DES ECB (PR 7960)
-* Update AES SIV to handle multiple associated data inputs (PR 7911)
-* Remove HAVE_NULL_CIPHER from --enable-openssh (PR 7811)
-* Removed duplicate if(NULL) checks when calling XFREE (macro does) (PR 7839)
-* Set RSA_MIN_SIZE default to 2048 bits (PR 7923)
-* Added support for wolfSSL to be used as the default TLS in the zephyr kernel
- (PR 7731)
-* Add enable provider build using --enable-wolfprovider with autotools (PR 7550)
-* Renesas RX TSIP ECDSA support (PR 7685)
-* Support DTLS1.3 downgrade when the server supports CID (PR 7841)
-* Server-side checks OCSP even if it uses v2 multi (PR 7828)
-* Add handling of absent hash params in PKCS7 bundle parsing and creation
- (PR 7845)
-* Add the use of w64wrapper for Poly1305, enabling Poly1305 to be used in
- environments that do not have a word64 type (PR 7759)
-* Update to the maxq10xx support (PR 7824)
-* Add support for parsing over optional PKCS8 attributes (PR 7944)
-* Add support for either side method with DTLS 1.3 (PR 8012)
-* Added PKCS7 PEM support for parsing PEM data with BEGIN/END PKCS7 (PR 7704)
-* Add CMake support for WOLFSSL_CUSTOM_CURVES (PR 7962)
-* Add left-most wildcard matching support to X509_check_host() (PR 7966)
-* Add option to set custom SKID with PKCS7 bundle creation (PR 7954)
-* Building wolfSSL as a library with Ada and corrections to Alire manifest
- (PR 7303,7940)
-* Renesas RX72N support updated (PR 7849)
-* New option WOLFSSL_COPY_KEY added to always copy the key to the SSL object
- (PR 8005)
-* Add the new option WOLFSSL_COPY_CERT to always copy the cert buffer for each
- SSL object (PR 7867)
-* Add an option to use AES-CBC with HMAC for default session ticket enc/dec.
- Defaults to AES-128-CBC with HMAC-SHA256 (PR 7703)
-* Memory usage improvements in wc_PRF, sha256 (for small code when many
- registers are available) and sp_int objects (PR 7901)
-* Change in the configure script to work around ">>" with no command. In older
- /bin/sh it can be ambiguous, as used in OS’s such as FreeBSD 9.2 (PR 7876)
-* Don't attempt to include system headers when not required (PR 7813)
-* Certificates: DER encoding of ECC signature algorithm parameter is now
- allowed to be NULL with a define (PR 7903)
-* SP x86_64 asm: check for AVX2 support for VMs (PR 7979)
-* Update rx64n support on gr-rose (PR 7889)
-* Update FSP version to v5.4.0 for RA6M4 (PR 7994)
-* Update TSIP driver version to v1.21 for RX65N RSK (PR 7993)
-* Add a new crypto callback for RSA with padding (PR 7907)
-* Replaced the use of pqm4 with wolfSSL implementations of Kyber/MLDSA
- (PR 7924)
-* Modernized memory fence support for C11 and clang (PR 7938)
-* Add a CRL error override callback (PR 7986)
-* Extend the X509 unknown extension callback for use with a user context
- (PR 7730)
-* Additional debug error tracing added with TLS (PR 7917)
-* Added runtime support for library call stack traces with
- –enable-debug-trace-errcodes=backtrace, using libbacktrace (PR 7846)
-* Expanded C89 conformance (PR 8077)
-* Expanded support for WOLFSSL_NO_MALLOC (PR 8065)
-* Added support for cross-compilation of Linux kernel module (PR 7746)
-* Updated Linux kernel module with support for kernel 6.11 and 6.12 (PR 7826)
-* Introduce WOLFSSL_ASN_ALLOW_0_SERIAL to allow parsing of certificates with a
- serial number of 0 (PR 7893)
-* Add conditional repository_owner to all wolfSSL GitHub workflows (PR 7871)
-
-### Espressif / Arduino Updates
-* Update wolfcrypt settings.h for Espressif ESP-IDF, template update (PR 7953)
-* Update Espressif sha, util, mem, time helpers (PR 7955)
-* Espressif _thread_local_start and _thread_local_end fix (PR 8030)
-* Improve benchmark for Espressif devices (PR 8037)
-* Introduce Espressif common CONFIG_WOLFSSL_EXAMPLE_NAME, Kconfig (PR 7866)
-* Add wolfSSL esp-tls and Certificate Bundle Support for Espressif ESP-IDF
- (PR 7936)
-* Update wolfssl Release for Arduino (PR 7775)
-
-### Post Quantum Crypto Updates
-* Dilithium: support fixed size arrays in dilithium_key (PR 7727)
-* Dilithium: add option to use precalc with small sign (PR 7744)
-* Allow Kyber to be built with FIPS (PR 7788)
-* Allow Kyber asm to be used in the Linux kernel module (PR 7872)
-* Dilithium, Kyber: Update to final specification (PR 7877)
-* Dilithium: Support FIPS 204 Draft and Final Draft (PR 7909,8016)
-
-### ARM Assembly Optimizations
-* ARM32 assembly optimizations added for ChaCha20 and Poly1305 (PR 8020)
-* Poly1305 assembly optimizations improvements for Aarch64 (PR 7859)
-* Poly1305 assembly optimizations added for Thumb-2 (PR 7939)
-* Adding ARM ASM build option to STM32CubePack (PR 7747)
-* Add ARM64 to Visual Studio Project (PR 8010)
-* Kyber assembly optimizations for ARM32 and Aarch64 (PR 8040,7998)
-* Kyber assembly optimizations for ARMv7E-M/ARMv7-M (PR 7706)
-
-
-## Fixes
-* ECC key load: fixes for certificates with parameters that are not default for
- size (PR 7751)
-* Fixes for building x86 in Visual Studio for non-windows OS (PR 7884)
-* Fix for TLS v1.2 secret callback, incorrectly detecting bad master secret
- (PR 7812)
-* Fixes for PowerPC assembly use with Darwin and SP math all (PR 7931)
-* Fix for detecting older versions of Mac OS when trying to link with
- libdispatch (PR 7932)
-* Fix for DTLS1.3 downgrade to DTLS1.2 when the server sends multiple handshake
- packets combined into a single transmission. (PR 7840)
-* Fix for OCSP to save the request if it was stored in ssl->ctx->certOcspRequest
- (PR 7779)
-* Fix to OCSP for searching for CA by key hash instead of ext. key id (PR 7934)
-* Fix for staticmemory and singlethreaded build (PR 7737)
-* Fix to not allow Shake128/256 with Xilinx AFALG (PR 7708)
-* Fix to support PKCS11 without RSA key generation (PR 7738)
-* Fix not calling the signing callback when using PK callbacks + TLS 1.3
- (PR 7761)
-* Cortex-M/Thumb2 ASM fix label for IAR compiler (PR 7753)
-* Fix with PKCS11 to iterate correctly over slotId (PR 7736)
-* Stop stripping out the sequence header on the AltSigAlg extension (PR 7710)
-* Fix ParseCRL_AuthKeyIdExt with ASN template to set extAuthKeyIdSet value
- (PR 7742)
-* Use max key length for PSK encrypt buffer size (PR 7707)
-* DTLS 1.3 fix for size check to include headers and CID fixes (PR 7912,7951)
-* Fix STM32 Hash FIFO and add support for STM32U5A9xx (PR 7787)
-* Fix CMake build error for curl builds (PR 8021)
-* SP Maths: PowerPC ASM fix to use XOR instead of LI (PR 8038)
-* SSL loading of keys/certs: testing and fixes (PR 7789)
-* Misc. fixes for Dilithium and Kyber (PR 7721,7765,7803,8027,7904)
-* Fixes for building wolfBoot sources for PQ LMS/XMSS (PR 7868)
-* Fixes for building with Kyber enabled using CMake and zephyr port (PR 7773)
-* Fix for edge cases with session resumption with TLS 1.2 (PR 8097)
-* Fix issue with ARM ASM with AES CFB/OFB not initializing the "left" member
- (PR 8099)
-
-
-# wolfSSL Release 5.7.2 (July 08, 2024)
-
-Release 5.7.2 has been developed according to wolfSSL's development and QA
-process (see link below) and successfully passed the quality criteria.
-https://www.wolfssl.com/about/wolfssl-software-development-process-quality-assurance
-
-NOTE: * --enable-heapmath is being deprecated and will be removed by end of 2024
-
-## Vulnerabilities
-* [Medium] CVE-2024-1544
-Potential ECDSA nonce side channel attack in versions of wolfSSL before 5.6.6 with wc_ecc_sign_hash calls. Generating the ECDSA nonce k samples a random number r and then truncates this randomness with a modular reduction mod n where n is the order of the elliptic curve. Analyzing the division through a control-flow revealing side-channel reveals a bias in the most significant bits of k. Depending on the curve this is either a negligible bias or a significant bias large enough to reconstruct k with lattice reduction methods. Thanks to Luca Wilke, Florian Sieck and Thomas Eisenbarth (University of Lübeck) for reporting the vulnerability. Details will appear in the proceedings of CCS 24.
-Fixed https://github.com/wolfSSL/wolfssl/pull/7020
-
-
-* [Medium] CVE-2024-5288
-A private key blinding operation, enabled by defining the macro WOLFSSL_BLIND_PRIVATE_KEY, was added to mitigate a potential row hammer attack on ECC operations. If performing ECC private key operations in an environment where a malicious user could gain fine control over the device and perform row hammer style attacks it is recommended to update the version of wolfSSL used and to build with WOLFSSL_BLIND_PRIVATE_KEY defined. Thanks to Kemal Derya, M. Caner Tol, Berk Sunar for the report (Vernam Applied Cryptography and Cybersecurity Lab at Worcester Polytechnic Institute)
-Fixed in github pull request https://github.com/wolfSSL/wolfssl/pull/7416
-
-
-* [Low] When parsing a provided maliciously crafted certificate directly using wolfSSL API, outside of a TLS connection, a certificate with an excessively large number of extensions could lead to a potential DoS. There are existing sanity checks during a TLS handshake with wolfSSL which mitigate this issue. Thanks to Bing Shi for the report.
-Fixed in github pull request https://github.com/wolfSSL/wolfssl/pull/7597
-
-* [Low] CVE-2024-5991
-In the function MatchDomainName(), input param str is treated as a NULL terminated string despite being user provided and unchecked. Specifically, the Openssl compatibility function X509_check_host() takes in a pointer and length to check against, with no requirements that it be NULL terminated. While calling without a NULL terminated string is very uncommon, it is still technically allowed. If a caller was attempting to do a name check on a non*NULL terminated buffer, the code would read beyond the bounds of the input array until it found a NULL terminator.
-Fixed in github pull request https://github.com/wolfSSL/wolfssl/pull/7604
-
-* [Medium] CVE-2024-5814
-A malicious TLS1.2 server can force a TLS1.3 client with downgrade capability to use a ciphersuite that it did not agree to and achieve a successful connection. This is because, aside from the extensions, the client was skipping fully parsing the server hello when downgrading from TLS 1.3.
-Fixed in github pull request https://github.com/wolfSSL/wolfssl/pull/7619
-
-* [Medium] OCSP stapling version 2 response verification bypass issue when a crafted response of length 0 is received. Found with internal testing.
-Fixed in github pull request https://github.com/wolfSSL/wolfssl/pull/7702
-
-* [Medium] OCSP stapling version 2 revocation bypass with a retry of a TLS connection attempt. A revoked CA certificate could incorrectly be loaded into the trusted signers list and used in a repeat connection attempt. Found with internal testing.
-Fixed in github pull request https://github.com/wolfSSL/wolfssl/pull/7702
-
-
-## New Feature Additions
-* Added Dilithium/ML-DSA: Implementation of ML-DSA-44/65/87 (PR 7622)
-* AES RISC-V 64-bit ASM: ECB/CBC/CTR/GCM/CCM (PR 7569)
-* Added CUDA support for AES encryption (PR 7436)
-* Added support for gRPC (PR 7445)
-* Added function wc_RsaPrivateKeyDecodeRaw to import raw RSA private keys (PR 7608)
-* Added crypto callback for SHA-3 (PR 7670)
-* Support for Infineon Modus Toolbox with wolfSSL (PR 7369)
-* Allow user to send a user_canceled alert by calling wolfSSL_SendUserCanceled (PR 7590)
-* C# wrapper SNI support added (PR 7610)
-* Quantum-safe algorithm support added to the Linux kernel module (PR 7574)
-* Support for NIST 800-56C Option 1 KDF, using the macro WC_KDF_NIST_SP_800_56C added (PR 7589)
-* AES-XTS streaming mode added, along with hardware acceleration and kernel module use (PR 7522, 7560, 7424)
-* PlatformIO FreeRTOS with ESP build and addition of benchmark and test example applications (PR 7528, 7413, 7559, 7542)
-
-
-## Enhancements and Optimizations
-* Expanded STM32 AES hardware acceleration support for use with STM32H5 (PR 7578)
-* Adjusted wc_xmss and wc_lms settings to support use with wolfBoot (PR 7393)
-* Added the --enable-rpk option to autotools build for using raw public key support (PR 7379)
-* SHA-3 Thumb2, ARM32 assembly implementation added (PR 7667)
-* Improvements to RSA padding to expose Pad/Unpad APIs (PR 7612)
-* Updates and API additions for supporting socat version 1.8.0.0 (PR 7594)
-* cmake build improvements, expanding build options with SINGLE_THREADED and post-quantum algorithms, adjusting the generation of options.h file and using “yes;no” boolean instead of strings (PR 7611, 7546, 7479, 7480, 7380)
-* Improvements for Renesas RZ support (PR 7474)
-* Improvements to dual algorithm certificates for post-quantum keys (PR 7286)
-* Added wolfSSL_SessionIsSetup so the user can check if a session ticket has been sent by the server (PR 7430)
-* hostap updates: Implement PACs for EAP-FAST and filter cipher list on TLS version change (PR 7446)
-* Changed subject name comparison to match different upper and lower cases (PR 7420)
-* Support for DTLS 1.3 downgrade when using PSK (PR 7367)
-* Update to static memory build for more generic memory pools used (PR 7418)
-* Improved performance of Kyber C implementation (PR 7654)
-* Support for ECC_CACHE_CURVE with no malloc (PR 7490)
-* Added the configure option --enable-debug-trace-errcodes (macro WOLFSSL_DEBUG_TRACE_ERROR_CODES) which enables more debug tracking of error code values (PR 7634)
-* Enhanced wc_MakeRsaKey and wc_RsaKeyToDer to work with WOLFSSL_NO_MALLOC (PR 7362)
-* Improvements to assembly implementations of ChaCha20 and Poly1305 ASM for use with MSVC (PR 7319)
-* Cortex-M inline assembly labels with unique number appended (PR 7649)
-* Added secret logging callback to TLS <= 1.2, enabled with the macro HAVE_SECRET_CALLBACK (PR 7372)
-* Made wc_RNG_DRBG_Reseed() a public wolfCrypt API (PR 7386)
-* Enabled DES3 support without the DES3 ciphers. To re-enable DES3 cipher suites, use the configure flag --enable-des3-tls-suites (PR 7315)
-* Added stubs required for latest nginx (1.25.5) (PR 7449)
-* Added option for using a custom salt with the function wc_ecc_ctx_set_own_salt (PR 7552)
-* Added PQ files for Windows (PR 7419)
-* Enhancements to static memory feature, adding the option for a global heap hint (PR 7478) and build options for a lean or debug setting, enabled with --enable-staticmemory=small or --enable-staticmemory=debug (PR 7597)
-* Updated --enable-jni to define SESSION_CERTS for wolfJSSE (PR 7557)
-* Exposed DTLS in Ada wrapper and updated examples (PR 7397)
-* Added additional minimum TLS extension size sanity checks (PR 7602)
-* ESP improvements: updating the examples and libraries, updates for Apple HomeKit SHA/SRP, and fix for endianness with SHA512 software fallback (PR 7607, 7392, 7505, 7535)
-* Made the wc_CheckCertSigPubKey API publicly available with the define of the macro WOLFSSL_SMALL_CERT_VERIFY (PR 7599)
-* Added an alpha/preview of additional FIPS 140-3 full submission, bringing additional algorithms such as SRTP-KDF, AES-XTS, GCM streaming, AES-CFB, ED25519, and ED448 into the FIPS module boundary (PR 7295)
-* XCODE support for v5.2.3 of the FIPS module (PR 7140)
-* Expanded OpenSSL compatibility layer and added EC_POINT_hex2point (PR 7191)
-
-## Fixes
-* Fixed Kyber control-flow timing leak. Thanks to Antoon Purnal from PQShield for the report
-* Fixed the NXP MMCAU HW acceleration for SHA-256 (PR 7389)
-* Fixed AES-CFB1 encrypt/decrypt on size (8*x-1) bits (PR 7431)
-* Fixed use of %rip with SHA-256 x64 assembly (PR 7409)
-* Fixed OCSP response message build for DTLS (PR 7671)
-* Handled edge case in wc_ecc_mulmod() with zero (PR 7532)
-* Fixed RPK (Raw Public Key) to follow certificate use correctly (PR 7375)
-* Added sanity check on record header with QUIC use (PR 7638)
-* Added sanity check for empty directory strings in X.509 when parsing (PR 7669)
-* Added sanity check on non-conforming serial number of 0 in certificates being parsed (PR 7625)
-* Fixed wolfSSL_CTX_set1_sigalgs_list() to make the TLS connection conform to the selected sig hash algorithm (PR 7693)
-* Various fixes for dual algorithm certificates including small stack use and support for Certificate Signing Requests (PR 7577)
-* Added sanity check for critical policy extension when wolfSSL is built without policy extension support enabled (PR 7388)
-* Added sanity check that the ed25519 signature is smaller than the order (PR 7513)
-* Fixed Segger emNet to handle non-blocking want read/want write (PR 7581)
-
-
 # wolfSSL Release 5.7.0 (Mar 20, 2024)
 
 Release 5.7.0 has been developed according to wolfSSL's development and QA
@@ -1037,7 +112,7 @@ fixed this omission in several PRs for this release.
 
 * [Low] CVE-2023-6936: A potential heap overflow read is possible in servers connecting over TLS 1.3 when the optional `WOLFSSL_CALLBACKS` has been defined. The out of bounds read can occur when a server receives a malicious malformed ClientHello. Users should either discontinue use of `WOLFSSL_CALLBACKS` on the server side or update versions of wolfSSL to 5.6.6. Thanks to the tlspuffin fuzzer team for the report which was designed and developed by; Lucca Hirschi (Inria, LORIA), Steve Kremer (Inria, LORIA), and Max Ammann (Trail of Bits). The fix for this issue is located in the following GitHub Pull Request: https://github.com/wolfSSL/wolfssl/pull/6949.
 
-* [Low] CVE-2024-1543: A side channel vulnerability with AES T-Tables is possible in a very controlled environment where precision sub-cache-line inspection can happen, such as inside an Intel SGX enclave. This can lead to recovery of the AES key. To prevent this type of attack, wolfSSL added an AES bitsliced implementation which can be enabled with the “`--enable-aes-bitsliced`” configure option. Thanks to Florian Sieck, Zhiyuan Zhang, Sebastian Berndt, Chitchanok Chuengsatiansup, Thomas Eisenbarth, and Yuval Yarom for the report (Universities of Lübeck, Melbourne, Adelaide and Bochum). The fix for this issue is located in the following GitHub Pull Request: https://github.com/wolfSSL/wolfssl/pull/6854.
+* [Low] A side channel vulnerability with AES T-Tables is possible in a very controlled environment where precision sub-cache-line inspection can happen, such as inside an Intel SGX enclave. This can lead to recovery of the AES key. To prevent this type of attack, wolfSSL added an AES bitsliced implementation which can be enabled with the “`--enable-aes-bitsliced`” configure option. Thanks to Florian Sieck, Zhiyuan Zhang, Sebastian Berndt, Chitchanok Chuengsatiansup, Thomas Eisenbarth, and Yuval Yarom for the report (Universities of Lübeck, Melbourne, Adelaide and Bochum). The fix for this issue is located in the following GitHub Pull Request: https://github.com/wolfSSL/wolfssl/pull/6854.
 
 * [Low] CVE-2023-6937: wolfSSL prior to 5.6.6 did not check that messages in a single (D)TLS record do not span key boundaries. As a result, it was possible to combine (D)TLS messages using different keys into one (D)TLS record. The most extreme edge case is that, in (D)TLS 1.3, it was possible that an unencrypted (D)TLS 1.3 record from the server containing first a ServerHello message and then the rest of the first server flight would be accepted by a wolfSSL client. In (D)TLS 1.3 the handshake is encrypted after the ServerHello but a wolfSSL client would accept an unencrypted flight from the server. This does not compromise key negotiation and authentication so it is assigned a low severity rating. Thanks to Johannes Wilson for the report (Sectra Communications and Linköping University). The fix for this issue is located in the following GitHub Pull Request: https://github.com/wolfSSL/wolfssl/pull/7029.
 

Docker/Dockerfile

@@ -6,11 +6,11 @@ USER root
 # Set timezone to UTC
 RUN ln -snf /usr/share/zoneinfo/UTC /etc/localtime && echo UTC > /etc/timezone
 
-ARG DEPS_WOLFSSL="build-essential autoconf libtool clang clang-tools zlib1g-dev libuv1-dev libpam0g-dev valgrind git linux-headers-generic gcc-multilib g++-multilib libpcap-dev bubblewrap gdb iputils-ping lldb bsdmainutils netcat-traditional binutils-arm-linux-gnueabi binutils-aarch64-linux-gnu"
+ARG DEPS_WOLFSSL="build-essential autoconf libtool clang clang-tools zlib1g-dev libuv1-dev libpam0g-dev valgrind git linux-headers-generic gcc-multilib g++-multilib libpcap-dev bubblewrap gdb iputils-ping lldb bsdmainutils netcat binutils-arm-linux-gnueabi binutils-aarch64-linux-gnu"
 ARG DEPS_LIBOQS="astyle cmake gcc ninja-build libssl-dev python3-pytest python3-pytest-xdist unzip xsltproc doxygen graphviz python3-yaml valgrind git"
 ARG DEPS_UDP_PROXY="wget libevent-dev"
-ARG DEPS_TESTS="abi-dumper libcurl4-openssl-dev tcpdump libpsl-dev python3-pandas python3-tabulate libnl-genl-3-dev libcap-ng-dev python3-virtualenv curl jq"
+ARG DEPS_TESTS="abi-dumper libcurl4-openssl-dev tcpdump libpsl-dev python3-pandas python3-tabulate libnl-genl-3-dev libcap-ng-dev"
-ARG DEPS_TOOLS="ccache clang-tidy maven libfile-util-perl android-tools-adb usbutils shellcheck"
+ARG DEPS_TOOLS="ccache clang-tidy maven"
 RUN DEBIAN_FRONTEND=noninteractive apt update && apt install -y apt-utils \
                     && apt install -y ${DEPS_WOLFSSL} ${DEPS_LIBOQS} ${DEPS_UDP_PROXY} ${DEPS_TESTS} ${DEPS_TOOLS} \
                     && apt clean -y && rm -rf /var/lib/apt/lists/*
@@ -40,12 +40,10 @@ RUN cd /opt/sources && git clone --single-branch https://github.com/cisco/hash-s
 
 # Install pkixssh to /opt/pkixssh for X509 interop testing with wolfSSH
 RUN mkdir /var/empty
-RUN cd /opt/sources && wget -q -O- https://roumenpetrov.info/secsh/src/pkixssh-15.1.tar.gz | tar xzf - && cd pkixssh-15.1 && ./configure --prefix=/opt/pkixssh/ --exec-prefix=/opt/pkixssh/ && make install
+RUN cd /opt/sources && wget -q -O- https://roumenpetrov.info/secsh/src/pkixssh-14.1.1.tar.gz | tar xzf - && cd pkixssh-14.1.1 && ./configure --prefix=/opt/pkixssh/ --exec-prefix=/opt/pkixssh/ && make install
 
 # Install udp/tcp-proxy
 RUN cd /opt/sources && git clone --depth=1 --single-branch --branch=main http://github.com/wolfssl/udp-proxy && cd udp-proxy && make && cp tcp_proxy udp_proxy /bin/.
-# Install libbacktrace
-RUN cd /opt/sources && git clone --depth=1 --single-branch https://github.com/ianlancetaylor/libbacktrace.git && cd libbacktrace && mkdir build && cd build && ../configure && make && make install
 
 # Allow non-root to use tcpdump (will need NET_RAW and NET_ADMIN capability when running the container)
 RUN setcap 'CAP_NET_RAW+eip CAP_NET_ADMIN+eip' /usr/bin/tcpdump

Docker/buildAndPush.sh

@@ -1,4 +1,4 @@
-#!/usr/bin/env bash
+#!/bin/bash
 
 # Assume we're in wolfssl/Docker
 WOLFSSL_DIR=$(builtin cd ${BASH_SOURCE%/*}/..; pwd)
@@ -18,37 +18,18 @@ docker build -t wolfssl/wolfssl-builder:${CUR_DATE} ${DOCKER_BUILD_OPTIONS} "${W
     docker tag wolfssl/testing-cross-compiler:${CUR_DATE} wolfssl/testing-cross-compiler:latest
 
 if [ $? -eq 0 ]; then
-    echo "Push containers to DockerHub [y/N]? "
+    echo "Pushing containers to DockerHub"
-    read val
+    docker push wolfssl/wolfssl-builder:${CUR_DATE} && docker push wolfssl/wolfssl-builder:latest && \
-    if [ "$val" = "y" ]; then
+        docker push wolfssl/testing-cross-compiler:${CUR_DATE} && docker push wolfssl/testing-cross-compiler:latest
-        docker push wolfssl/wolfssl-builder:${CUR_DATE} && docker push wolfssl/wolfssl-builder:latest && \
-            docker push wolfssl/testing-cross-compiler:${CUR_DATE} && docker push wolfssl/testing-cross-compiler:latest
-        if [ $? -ne 0 ]; then
-            echo "Warning: push failed. Continuing"
-            ((NUM_FAILURES++))
-        fi
-    fi
 else
     echo "Warning: Build wolfssl/wolfssl-builder failed. Continuing"
     ((NUM_FAILURES++))
 fi
 
 echo "Building wolfssl/wolfCLU:${CUR_DATE}"
-DOCKER_ARGS="--pull --build-arg DUMMY=${CUR_DATE} --platform=linux/amd64,linux/arm64,linux/arm/v7 ${WOLFSSL_DIR}/Docker/wolfCLU"
+docker buildx build --pull --push --build-arg DUMMY=${CUR_DATE} -t wolfssl/wolfclu:${CUR_DATE} --platform=linux/amd64,linux/arm64,linux/arm/v7 "${WOLFSSL_DIR}/Docker/wolfCLU" && \
-docker buildx build -t wolfssl/wolfclu:${CUR_DATE} ${DOCKER_ARGS} && \
+docker buildx build --pull --push --build-arg DUMMY=${CUR_DATE} -t wolfssl/wolfclu:latest      --platform=linux/amd64,linux/arm64,linux/arm/v7 "${WOLFSSL_DIR}/Docker/wolfCLU"
-    docker buildx build -t wolfssl/wolfclu:latest ${DOCKER_ARGS}
+if [ $? -ne 0 ]; then
-if [ $? -eq 0 ]; then
-    echo "Push containers to DockerHub [y/N]? "
-    read val
-    if [ "$val" = "y" ]; then
-        docker buildx build ${DOCKER_ARGS} --push -t wolfssl/wolfclu:${CUR_DATE} && \
-            docker buildx build ${DOCKER_ARGS} --push -t wolfssl/wolfclu:latest
-        if [ $? -ne 0 ]; then
-            echo "Warning: push failed. Continuing"
-            ((NUM_FAILURES++))
-        fi
-    fi
-else
     echo "Warning: Build wolfssl/wolfclu failed. Continuing"
     ((NUM_FAILURES++))
 fi

Docker/packaging/debian/Dockerfile

@@ -2,4 +2,5 @@ FROM debian:latest
 
 RUN apt-get -y update
 RUN apt-get -y upgrade
-RUN apt-get install -y build-essential autoconf gawk debhelper lintian dpkg-dev
+RUN apt-get install -y build-essential autoconf gawk debhelper lintian
+

Docker/run.sh

@@ -1,4 +1,4 @@
-#!/usr/bin/env bash
+#!/bin/bash
 
 echo "Running with \"${*}\"..."
 

Docker/wolfCLU/Dockerfile

@@ -1,9 +1,9 @@
 ARG DOCKER_BASE_IMAGE=ubuntu
-FROM ubuntu AS builder
+FROM ubuntu as BUILDER
 
-ARG DEPS_WOLFSSL="build-essential autoconf libtool zlib1g-dev libuv1-dev libpam0g-dev git libpcap-dev libcurl4-openssl-dev bsdmainutils netcat-traditional iputils-ping bubblewrap"
+ARG DEPS_WOLFSSL="build-essential autoconf libtool zlib1g-dev libuv1-dev libpam0g-dev git libpcap-dev libcurl4-openssl-dev bsdmainutils netcat iputils-ping bubblewrap"
 RUN DEBIAN_FRONTEND=noninteractive apt update && apt install -y apt-utils \
-                    && apt install -y ${DEPS_WOLFSSL} \
+                    && apt install -y ${DEPS_WOLFSSL} ${DEPS_LIBOQS} \
                     && apt clean -y && rm -rf /var/lib/apt/lists/*
 
 ARG NUM_CPU=16
@@ -18,8 +18,8 @@ RUN git clone --depth=1 --single-branch --branch=main http://github.com/wolfssl/
 
 FROM ${DOCKER_BASE_IMAGE}
 USER root
-COPY --from=builder /usr/local/lib/libwolfssl.so /usr/local/lib/
+COPY --from=BUILDER /usr/local/lib/libwolfssl.so /usr/local/lib/
-COPY --from=builder /usr/local/bin/wolfssl* /usr/local/bin/
+COPY --from=BUILDER /usr/local/bin/wolfssl* /usr/local/bin/
 RUN ldconfig
 ENTRYPOINT ["/usr/local/bin/wolfssl"]
 LABEL org.opencontainers.image.source=https://github.com/wolfssl/wolfssl

Docker/yocto/buildAndPush.sh

@@ -1,4 +1,4 @@
-#!/usr/bin/env bash
+#!/bin/bash
 
 # Assume we're in wolfssl/Docker/yocto
 WOLFSSL_DIR=$(builtin cd ${BASH_SOURCE%/*}/../..; pwd)

IDE/ARDUINO/Arduino_README_prepend.md

@@ -4,46 +4,10 @@ This library is restructured from [wolfSSL](https://github.com/wolfSSL/wolfssl/)
 
 The Official wolfSSL Arduino Library is found in [The Library Manager index](http://downloads.arduino.cc/libraries/library_index.json).
 
-See the [Arduino-wolfSSL logs](https://downloads.arduino.cc/libraries/logs/github.com/wolfSSL/Arduino-wolfSSL/) for publishing status.
+See the [Arduino-wolfSSL logs](https://downloads.arduino.cc/libraries/logs/github.com/wolfSSL/Arduino-wolfSSL/).
-
-Instructions for installing and using libraries can be found in the [Arduino docs](https://docs.arduino.cc/software/ide-v1/tutorials/installing-libraries/).
-
-## wolfSSL Configuration
-
-As described in the [Getting Started with wolfSSL on Arduino](https://www.wolfssl.com/getting-started-with-wolfssl-on-arduino/), wolfSSL features are enabled and disabled in the `user_settings.h` file.
-
-The `user_settings.h` file is found in the `<Arduino>/libraries/wolfssl/src` directory.
-
-For Windows this is typically `C:\Users\%USERNAME%\Documents\Arduino\libraries\wolfssl\src`
-
-For Mac: `~/Documents/Arduino/libraries/wolfssl/src`
-
-For Linux: `~/Arduino/libraries/wolfssl/src`
-
-Tips for success:
-
-- The `WOLFSSL_USER_SETTINGS` macro must be defined project-wide. (see [wolfssl.h](https://github.com/wolfSSL/wolfssl/blob/master/IDE/ARDUINO/wolfssl.h))
-- Apply any customizations only to `user_settings.h`;  Do not edit wolfSSL `settings.h` or `configh.h` files.
-- Do not explicitly include `user_settings.h` in any source file.
-- For every source file that uses wolfssl, include `wolfssl/wolfcrypt/settings.h` before any other wolfSSL include, typically via `#include "wolfssl.h"`.
-- See the [wolfSSL docs](https://www.wolfssl.com/documentation/manuals/wolfssl/chapter02.html) for details on build configuration macros.
-
-## wolfSSL Examples
-
-Additional wolfSSL examples can be found at:
-
-- https://github.com/wolfSSL/wolfssl/tree/master/IDE/ARDUINO
-
-- https://github.com/wolfSSL/wolfssl/tree/master/examples
-
-- https://github.com/wolfSSL/wolfssl-examples/
 
 ## Arduino Releases
 
-This release of wolfSSL is version [5.7.6](https://github.com/wolfSSL/wolfssl/releases/tag/v5.7.6-stable).
+The first Official wolfSSL Arduino Library is `5.6.6-Arduino.1`: a slightly modified, post [release 5.6.6](https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.6-stable) version update.
 
-See GitHub for [all Arduino wolfSSL releases](https://github.com/wolfSSL/Arduino-wolfSSL/releases).
+See other [wolfSSL releases versions](https://github.com/wolfSSL/wolfssl/releases). The `./wolfssl-arduino.sh INSTALL` [script](https://github.com/wolfSSL/wolfssl/tree/master/IDE/ARDUINO) can be used to install specific GitHub versions as needed.
-
-The first Official wolfSSL Arduino Library was `5.6.6-Arduino.1`: a slightly modified, post [release 5.6.6](https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.6-stable) version update.
-
-The `./wolfssl-arduino.sh INSTALL` [script](https://github.com/wolfSSL/wolfssl/tree/master/IDE/ARDUINO) can be used to install specific GitHub versions as needed.

IDE/ARDUINO/README.md

@@ -1,50 +1,19 @@
 # wolfSSL with Arduino
 
-See the [example sketches](https://github.com/wolfSSL/wolfssl-examples/tree/master/Arduino):
+See the [example sketches](./sketches/README.md):
 
-Bare-bones templates:
+- [sketches/wolfssl_server](./sketches/wolfssl_server/README.md)
-
+- [sketches/wolfssl_client](./sketches/wolfssl_client/README.md)
-- [sketches/wolfssl_version](https://github.com/wolfSSL/wolfssl-examples/tree/master/Arduino/sketches/wolfssl_version/README.md) single file.
-- [sketches/template](https://github.com/wolfSSL/wolfssl-examples/tree/master/Arduino/sketches/template/README.md) multiple file example.
-
-Functional examples:
-- [sketches/wolfssl_AES_CTR](https://github.com/wolfSSL/wolfssl-examples/tree/master/Arduino/sketches/wolfssl_AES_CTR/README.md) AES CTR Encrypt / decrypt.
-- [sketches/wolfssl_client](https://github.com/wolfSSL/wolfssl-examples/tree/master/Arduino/sketches/wolfssl_client/README.md) TLS Client.
-- [sketches/wolfssl_server](https://github.com/wolfSSL/wolfssl-examples/tree/master/Arduino/sketches/wolfssl_server/README.md) TLS Server.
-- [sketches/wolfssl_client_dtls](https://github.com/wolfSSL/wolfssl-examples/tree/master/Arduino/sketches/wolfssl_client_dtls/README.md) DTLS Client.
-- [sketches/wolfssl_server_dtls](https://github.com/wolfSSL/wolfssl-examples/tree/master/Arduino/sketches/wolfssl_server_dtls/README.md) DTLS Server.
-
-Both the `template` and `wolfssl_AES_CTR` examples include VisualGDB project files.
 
 When publishing a new version to the Arduino Registry, be sure to edit `WOLFSSL_VERSION_ARUINO_SUFFIX` in the `wolfssl-arduino.sh` script.
 
-## Getting Started
-
-See [Getting Started with wolfSSL on Arduino](https://www.wolfssl.com/getting-started-with-wolfssl-on-arduino/), wolfSSL features are enabled and disabled in the `user_settings.h` file.
-
-The `user_settings.h` file is found in the `<Arduino>/libraries/wolfssl/src` directory.
-
-For Windows this is typically `C:\Users\%USERNAME%\Documents\Arduino\libraries\wolfssl\src`
-
-For Mac: `~/Documents/Arduino/libraries/wolfssl/src`
-
-For Linux: `~/Arduino/libraries/wolfssl/src`
-
-Tips for success:
-
-- The `WOLFSSL_USER_SETTINGS` macro must be defined project-wide. (see [wolfssl.h](https://github.com/wolfSSL/wolfssl/blob/master/IDE/ARDUINO/wolfssl.h))
-- Apply any customizations only to `user_settings.h`;  Do not edit wolfSSL `settings.h` or `configh.h` files.
-- Do not explicitly include `user_settings.h` in any source file.
-- For every source file that uses wolfssl, include `wolfssl/wolfcrypt/settings.h` before any other wolfSSL include, typically via `#include "wolfssl.h"`.
-- See the [wolfSSL docs](https://www.wolfssl.com/documentation/manuals/wolfssl/chapter02.html) for details on build configuration macros.
-
 ## Boards
 
 Many of the supported boards are natively built-in to the [Arduino IDE Board Manager](https://docs.arduino.cc/software/ide-v2/tutorials/ide-v2-board-manager/)
 and by adding [additional cores](https://docs.arduino.cc/learn/starting-guide/cores/) as needed.
 
 STM32 Support can be added by including this link in the "Additional Boards Managers URLs" field
-from [stm32duino/Arduino_Core_STM32](https://github.com/stm32duino/Arduino_Core_STM32?tab=readme-ov-file#getting-started).
+from [stm32duino/Arduino_Core_STM32](https://github.com/stm32duino/Arduino_Core_STM32?tab=readme-ov-file#getting-started)   .
 
 ```
 https://github.com/stm32duino/BoardManagerFiles/raw/main/package_stmicroelectronics_index.json
@@ -73,7 +42,7 @@ from within the `wolfssl/IDE/ARDUINO` directory:
 
 1. `./wolfssl-arduino.sh`
     - Creates an Arduino Library directory structure in the local `wolfSSL` directory of `IDE/ARDUINO`.
-    - You can add your own `user_settings.h`, or copy/rename the [default](https://github.com/wolfSSL/wolfssl/blob/master/examples/configs/user_settings_arduino.h).
+    - You can add your own `user_settings.h`, or copy/rename the [default](../../examples/configs/user_settings_arduino.h).
 
 2. `./wolfssl-arduino.sh INSTALL` (The most common option)
     - Creates an Arduino Library in the local `wolfSSL` directory

IDE/ARDUINO/include.am

@@ -2,32 +2,16 @@
 # included from Top Level Makefile.am
 # All paths should be given relative to the root
 
-# Library files:
 EXTRA_DIST+= IDE/ARDUINO/README.md
-
-# There's an Arduino-specific Arduino_README_prepend.md that will be prepended to wolfSSL README.md
-# Not to be confused with the interim PREPENDED_README.md that is created by script.
 EXTRA_DIST+= IDE/ARDUINO/Arduino_README_prepend.md
-
-# Core library files
-EXTRA_DIST+= IDE/ARDUINO/wolfssl.h
-EXTRA_DIST+= IDE/ARDUINO/wolfssl.h
-EXTRA_DIST+= IDE/ARDUINO/wolfssl-arduino.cpp
-
 EXTRA_DIST+= IDE/ARDUINO/keywords.txt
 EXTRA_DIST+= IDE/ARDUINO/library.properties.template
-
-# Sketch Examples
 EXTRA_DIST+= IDE/ARDUINO/sketches/README.md
-
-# wolfssl_client example sketch
 EXTRA_DIST+= IDE/ARDUINO/sketches/wolfssl_client/README.md
-
+EXTRA_DIST+= IDE/ARDUINO/sketches/wolfssl_client/wolfssl_client.ino
-# wolfssl_server example sketch
 EXTRA_DIST+= IDE/ARDUINO/sketches/wolfssl_server/README.md
-
+EXTRA_DIST+= IDE/ARDUINO/sketches/wolfssl_server/wolfssl_server.ino
-# wolfssl_version example sketch
 EXTRA_DIST+= IDE/ARDUINO/sketches/wolfssl_version/README.md
-
+EXTRA_DIST+= IDE/ARDUINO/sketches/wolfssl_version/wolfssl_version.ino
-# Publishing script, either local install or to github.com/wolfSSL/Arduino-wolfSSL clone directory.
+EXTRA_DIST+= IDE/ARDUINO/wolfssl.h
 EXTRA_DIST+= IDE/ARDUINO/wolfssl-arduino.sh

IDE/ARDUINO/sketches/README.md

@@ -1,75 +1,12 @@
 # wolfSSL Arduino Examples
 
-There are currently five example Arduino sketches:
+There are currently two example Arduino sketches:
 
-NOTE: Moving; See https://github.com/wolfSSL/wolfssl-examples/pull/499
+* [wolfssl_client](./wolfssl_client/README.md): Basic TLS listening client.
-
+* [wolfssl_server](./wolfssl_server/README.md): Basic TLS server.
-* `template`: Reference template wolfSSL example, including optional VisualGDB project files.
-* `wolfssl_AES_CTR`: Basic AES CTR Encryption / Decryption example.
-* `wolfssl_client`: Basic TLS listening client.
-* `wolfssl_server`: Basic TLS server.
-* `wolfssl_version`: Bare-bones wolfSSL example.
 
 Examples have been most recently confirmed operational on the
 [Arduino IDE](https://www.arduino.cc/en/software) 2.2.1.
 
 For examples on other platforms, see the [IDE directory](https://github.com/wolfssl/wolfssl/tree/master/IDE).
-Additional wolfssl examples can be found at [wolfSSL/wolfssl-examples](https://github.com/wolfSSL/wolfssl-examples/).
+Additional examples can be found on [wolfSSL/wolfssl-examples](https://github.com/wolfSSL/wolfssl-examples/).
-
-## Using wolfSSL
-
-The typical include will look something like this:
-
-```
-#include <Arduino.h>
-
- /* wolfSSL user_settings.h must be included from settings.h
-  * Make all configurations changes in user_settings.h
-  * Do not edit wolfSSL `settings.h` or `config.h` files.
-  * Do not explicitly include user_settings.h in any source code.
-  * Each Arduino sketch that uses wolfSSL must have: #include "wolfssl.h"
-  * C/C++ source files can use: #include <wolfssl/wolfcrypt/settings.h>
-  * The wolfSSL "settings.h" must be included in each source file using wolfSSL.
-  * The wolfSSL "settings.h" must appear before any other wolfSSL include.
-  */
-#include <wolfssl.h>
-
-/* settings.h is typically included in wolfssl.h, but here as a reminder: */
-#include <wolfssl/wolfcrypt/settings.h>
-
-/* Any other wolfSSL includes follow:*
-#include <wolfssl/version.h>
-```
-
-## Configuring wolfSSL
-
-See the `user_settings.h` in the Arduino library `wolfssl/src` directory. For Windows users this is typically:
-
-```
-C:\Users\%USERNAME%\Documents\Arduino\libraries\wolfssl\src
-```
-
-WARNING: Changes to the library `user_settings.h` file will be lost when upgrading wolfSSL using the Arduino IDE.
-
-## Troubleshooting
-
-If compile problems are encountered, for example:
-
-```
-ctags: cannot open temporary file : File exists
-exit status 1
-
-Compilation error: exit status 1
-```
-
-Try deleting the Arduino cache directory:
-
-```
-C:\Users\%USERNAME%\AppData\Local\arduino\sketches
-```
-
-For VisualGDB users, delete the project `.vs`, `Output`, and `TraceReports` directories.
-
-## More Information
-
-For more details, see [IDE/ARDUINO/README.md](https://github.com/wolfSSL/wolfssl/blob/master/IDE/ARDUINO/README.md)

IDE/ARDUINO/sketches/wolfssl_client/README.md

@@ -1,14 +1,6 @@
 # Arduino Basic TLS Listening Client
 
-Open the `wolfssl_client.ino` file in the Arduino IDE.
+Open the [wolfssl_client.ino](./wolfssl_client.ino) file in the Arduino IDE.
-
-NOTE: Moving; See https://github.com/wolfSSL/wolfssl-examples/pull/499
-
-If using WiFi, be sure to set `ssid` and `password` values.
-
-May need "Ethernet by Various" library to be installed. Tested with v2.0.2 and v2.8.1.
-
-See the `#define WOLFSSL_TLS_SERVER_HOST` to set your own server address.
 
 Other IDE products are also supported, such as: