Bump 0.13.0 (#20336)

## Summary

From #17371

In #17371, `DivergentType` was introduced to prevent type inference for
recursive functions from diverging and causing panics. This turned out
to be useful for other divergent type inferences
(https://github.com/astral-sh/ruff/pull/17371#discussion_r2329337965),
so I extracted the introduction part of `DivergentType` into this PR so
that we can use it without waiting for the merge of #17371.

Note that this PR only introduces `DivergentType` and does not actually
address divergent type inference yet. Please refer to
https://github.com/astral-sh/ruff/pull/17371/files#diff-20b910c6e20faa962bb1642e111db1cbad8e66ace089bdd966ac9d7f9fa99ff2R542-R622
etc. when implementing handling of divergence suppression using this
type.

## Test Plan

---------

Co-authored-by: Carl Meyer <carl@oddbird.net>

.github/workflows/ci.yaml

@@ -250,7 +250,7 @@ jobs:
       - name: "Install Rust toolchain"
         run: rustup show
       - name: "Install mold"
-        uses: rui314/setup-mold@7344740a9418dcdcb481c7df83d9fbd1d5072d7d # v1
+        uses: rui314/setup-mold@725a8794d15fc7563f59595bd9556495c0564878 # v1
       - name: "Install cargo nextest"
         uses: taiki-e/install-action@6064345e6658255e90e9500fdf9a06ab77e6909c # v2.57.6
         with:
@@ -259,6 +259,10 @@ jobs:
         uses: taiki-e/install-action@6064345e6658255e90e9500fdf9a06ab77e6909c # v2.57.6
         with:
           tool: cargo-insta
+      - name: "Install uv"
+        uses: astral-sh/setup-uv@e92bafb6253dcd438e0484186d7669ea7a8ca1cc # v6.4.3
+        with:
+          enable-cache: "true"
       - name: ty mdtests (GitHub annotations)
         if: ${{ needs.determine_changes.outputs.ty == 'true' }}
         env:
@@ -308,7 +312,7 @@ jobs:
       - name: "Install Rust toolchain"
         run: rustup show
       - name: "Install mold"
-        uses: rui314/setup-mold@7344740a9418dcdcb481c7df83d9fbd1d5072d7d # v1
+        uses: rui314/setup-mold@725a8794d15fc7563f59595bd9556495c0564878 # v1
       - name: "Install cargo nextest"
         uses: taiki-e/install-action@6064345e6658255e90e9500fdf9a06ab77e6909c # v2.57.6
         with:
@@ -317,6 +321,10 @@ jobs:
         uses: taiki-e/install-action@6064345e6658255e90e9500fdf9a06ab77e6909c # v2.57.6
         with:
           tool: cargo-insta
+      - name: "Install uv"
+        uses: astral-sh/setup-uv@e92bafb6253dcd438e0484186d7669ea7a8ca1cc # v6.4.3
+        with:
+          enable-cache: "true"
       - name: "Run tests"
         shell: bash
         env:
@@ -340,6 +348,10 @@ jobs:
         uses: taiki-e/install-action@6064345e6658255e90e9500fdf9a06ab77e6909c # v2.57.6
         with:
           tool: cargo-nextest
+      - name: "Install uv"
+        uses: astral-sh/setup-uv@e92bafb6253dcd438e0484186d7669ea7a8ca1cc # v6.4.3
+        with:
+          enable-cache: "true"
       - name: "Run tests"
         shell: bash
         env:
@@ -393,7 +405,7 @@ jobs:
       - name: "Install Rust toolchain"
         run: rustup show
       - name: "Install mold"
-        uses: rui314/setup-mold@7344740a9418dcdcb481c7df83d9fbd1d5072d7d # v1
+        uses: rui314/setup-mold@725a8794d15fc7563f59595bd9556495c0564878 # v1
       - name: "Build"
         run: cargo build --release --locked
 
@@ -418,7 +430,7 @@ jobs:
           MSRV: ${{ steps.msrv.outputs.value }}
         run: rustup default "${MSRV}"
       - name: "Install mold"
-        uses: rui314/setup-mold@7344740a9418dcdcb481c7df83d9fbd1d5072d7d # v1
+        uses: rui314/setup-mold@725a8794d15fc7563f59595bd9556495c0564878 # v1
       - name: "Build tests"
         shell: bash
         env:
@@ -441,9 +453,7 @@ jobs:
       - name: "Install Rust toolchain"
         run: rustup show
       - name: "Install cargo-binstall"
-        uses: cargo-bins/cargo-binstall@0dca8cf8dfb40cb77a29cece06933ce674674523 # v1.15.1
-        with:
-          tool: cargo-fuzz@0.11.2
+        uses: cargo-bins/cargo-binstall@837578dfb436769f1e6669b2e23ffea9d9d2da8f # v1.15.4
       - name: "Install cargo-fuzz"
         # Download the latest version from quick install and not the github releases because github releases only has MUSL targets.
         run: cargo binstall cargo-fuzz --force  --disable-strategies crate-meta-data --no-confirm
@@ -463,7 +473,7 @@ jobs:
       - uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           persist-credentials: false
-      - uses: astral-sh/setup-uv@4959332f0f014c5280e7eac8b70c90cb574c9f9b # v6.6.0
+      - uses: astral-sh/setup-uv@557e51de59eb14aaaba2ed9621916900a91d50c6 # v6.6.1
       - uses: actions/download-artifact@d3f86a106a0bac45b974a628896c90dbdf5c8093 # v4.3.0
         name: Download Ruff binary to test
         id: download-cached-binary
@@ -664,7 +674,7 @@ jobs:
           branch: ${{ github.event.pull_request.base.ref }}
           workflow: "ci.yaml"
           check_artifacts: true
-      - uses: astral-sh/setup-uv@4959332f0f014c5280e7eac8b70c90cb574c9f9b # v6.6.0
+      - uses: astral-sh/setup-uv@557e51de59eb14aaaba2ed9621916900a91d50c6 # v6.6.1
       - name: Fuzz
         env:
           FORCE_COLOR: 1
@@ -694,7 +704,7 @@ jobs:
       - uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           persist-credentials: false
-      - uses: cargo-bins/cargo-binstall@0dca8cf8dfb40cb77a29cece06933ce674674523 # v1.15.1
+      - uses: cargo-bins/cargo-binstall@837578dfb436769f1e6669b2e23ffea9d9d2da8f # v1.15.4
       - run: cargo binstall --no-confirm cargo-shear
       - run: cargo shear
 
@@ -734,7 +744,7 @@ jobs:
       - uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           persist-credentials: false
-      - uses: astral-sh/setup-uv@4959332f0f014c5280e7eac8b70c90cb574c9f9b # v6.6.0
+      - uses: astral-sh/setup-uv@557e51de59eb14aaaba2ed9621916900a91d50c6 # v6.6.1
       - uses: Swatinem/rust-cache@98c8021b550208e191a6a3145459bfc9fb29c4c0 # v2.8.0
       - uses: actions/setup-node@49933ea5288caeca8642d1e84afbd3f7d6820020 # v4.4.0
         with:
@@ -777,7 +787,7 @@ jobs:
       - name: "Install Rust toolchain"
         run: rustup show
       - name: Install uv
-        uses: astral-sh/setup-uv@4959332f0f014c5280e7eac8b70c90cb574c9f9b # v6.6.0
+        uses: astral-sh/setup-uv@557e51de59eb14aaaba2ed9621916900a91d50c6 # v6.6.1
       - name: "Install Insiders dependencies"
         if: ${{ env.MKDOCS_INSIDERS_SSH_KEY_EXISTS == 'true' }}
         run: uv pip install -r docs/requirements-insiders.txt --system
@@ -909,7 +919,7 @@ jobs:
           persist-credentials: false
 
       - uses: Swatinem/rust-cache@98c8021b550208e191a6a3145459bfc9fb29c4c0 # v2.8.0
-      - uses: astral-sh/setup-uv@4959332f0f014c5280e7eac8b70c90cb574c9f9b # v6.6.0
+      - uses: astral-sh/setup-uv@557e51de59eb14aaaba2ed9621916900a91d50c6 # v6.6.1
 
       - name: "Install Rust toolchain"
         run: rustup show
@@ -923,7 +933,7 @@ jobs:
         run: cargo codspeed build --features "codspeed,instrumented" --no-default-features -p ruff_benchmark
 
       - name: "Run benchmarks"
-        uses: CodSpeedHQ/action@0b6e7a3d96c9d2a6057e7bcea6b45aaf2f7ce60b # v3.8.0
+        uses: CodSpeedHQ/action@76578c2a7ddd928664caa737f0e962e3085d4e7c # v3.8.1
         with:
           run: cargo codspeed run
           token: ${{ secrets.CODSPEED_TOKEN }}
@@ -942,7 +952,7 @@ jobs:
           persist-credentials: false
 
       - uses: Swatinem/rust-cache@98c8021b550208e191a6a3145459bfc9fb29c4c0 # v2.8.0
-      - uses: astral-sh/setup-uv@4959332f0f014c5280e7eac8b70c90cb574c9f9b # v6.6.0
+      - uses: astral-sh/setup-uv@557e51de59eb14aaaba2ed9621916900a91d50c6 # v6.6.1
 
       - name: "Install Rust toolchain"
         run: rustup show
@@ -956,7 +966,7 @@ jobs:
         run: cargo codspeed build --features "codspeed,walltime" --no-default-features -p ruff_benchmark
 
       - name: "Run benchmarks"
-        uses: CodSpeedHQ/action@0b6e7a3d96c9d2a6057e7bcea6b45aaf2f7ce60b # v3.8.0
+        uses: CodSpeedHQ/action@76578c2a7ddd928664caa737f0e962e3085d4e7c # v3.8.1
         with:
           run: cargo codspeed run
           token: ${{ secrets.CODSPEED_TOKEN }}

.github/workflows/daily_fuzz.yaml

@@ -34,11 +34,11 @@ jobs:
       - uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           persist-credentials: false
-      - uses: astral-sh/setup-uv@4959332f0f014c5280e7eac8b70c90cb574c9f9b # v6.6.0
+      - uses: astral-sh/setup-uv@557e51de59eb14aaaba2ed9621916900a91d50c6 # v6.6.1
       - name: "Install Rust toolchain"
         run: rustup show
       - name: "Install mold"
-        uses: rui314/setup-mold@7344740a9418dcdcb481c7df83d9fbd1d5072d7d # v1
+        uses: rui314/setup-mold@725a8794d15fc7563f59595bd9556495c0564878 # v1
       - uses: Swatinem/rust-cache@98c8021b550208e191a6a3145459bfc9fb29c4c0 # v2.8.0
       - name: Build ruff
         # A debug build means the script runs slower once it gets started,

.github/workflows/mypy_primer.yaml

@@ -39,7 +39,7 @@ jobs:
           persist-credentials: false
 
       - name: Install the latest version of uv
-        uses: astral-sh/setup-uv@4959332f0f014c5280e7eac8b70c90cb574c9f9b # v6.6.0
+        uses: astral-sh/setup-uv@557e51de59eb14aaaba2ed9621916900a91d50c6 # v6.6.1
 
       - uses: Swatinem/rust-cache@98c8021b550208e191a6a3145459bfc9fb29c4c0 # v2.8.0
         with:
@@ -82,7 +82,7 @@ jobs:
           persist-credentials: false
 
       - name: Install the latest version of uv
-        uses: astral-sh/setup-uv@4959332f0f014c5280e7eac8b70c90cb574c9f9b # v6.6.0
+        uses: astral-sh/setup-uv@557e51de59eb14aaaba2ed9621916900a91d50c6 # v6.6.1
 
       - uses: Swatinem/rust-cache@98c8021b550208e191a6a3145459bfc9fb29c4c0 # v2.8.0
         with:

.github/workflows/publish-pypi.yml

@@ -22,7 +22,7 @@ jobs:
       id-token: write
     steps:
       - name: "Install uv"
-        uses: astral-sh/setup-uv@4959332f0f014c5280e7eac8b70c90cb574c9f9b # v6.6.0
+        uses: astral-sh/setup-uv@557e51de59eb14aaaba2ed9621916900a91d50c6 # v6.6.1
       - uses: actions/download-artifact@d3f86a106a0bac45b974a628896c90dbdf5c8093 # v4.3.0
         with:
           pattern: wheels-*

.github/workflows/sync_typeshed.yaml

@@ -65,7 +65,7 @@ jobs:
         run: |
           git config --global user.name typeshedbot
           git config --global user.email '<>'
-      - uses: astral-sh/setup-uv@4959332f0f014c5280e7eac8b70c90cb574c9f9b # v6.6.0
+      - uses: astral-sh/setup-uv@557e51de59eb14aaaba2ed9621916900a91d50c6 # v6.6.1
       - name: Sync typeshed stubs
         run: |
           rm -rf "ruff/${VENDORED_TYPESHED}"
@@ -117,7 +117,7 @@ jobs:
         with:
           persist-credentials: true
           ref: ${{ env.UPSTREAM_BRANCH}}
-      - uses: astral-sh/setup-uv@4959332f0f014c5280e7eac8b70c90cb574c9f9b # v6.6.0
+      - uses: astral-sh/setup-uv@557e51de59eb14aaaba2ed9621916900a91d50c6 # v6.6.1
       - name: Setup git
         run: |
           git config --global user.name typeshedbot
@@ -155,7 +155,7 @@ jobs:
         with:
           persist-credentials: true
           ref: ${{ env.UPSTREAM_BRANCH}}
-      - uses: astral-sh/setup-uv@4959332f0f014c5280e7eac8b70c90cb574c9f9b # v6.6.0
+      - uses: astral-sh/setup-uv@557e51de59eb14aaaba2ed9621916900a91d50c6 # v6.6.1
       - name: Setup git
         run: |
           git config --global user.name typeshedbot

.github/workflows/ty-ecosystem-analyzer.yaml

@@ -33,7 +33,7 @@ jobs:
           persist-credentials: false
 
       - name: Install the latest version of uv
-        uses: astral-sh/setup-uv@4959332f0f014c5280e7eac8b70c90cb574c9f9b # v6.6.0
+        uses: astral-sh/setup-uv@557e51de59eb14aaaba2ed9621916900a91d50c6 # v6.6.1
 
       - uses: Swatinem/rust-cache@98c8021b550208e191a6a3145459bfc9fb29c4c0 # v2.8.0
         with:
@@ -64,11 +64,12 @@ jobs:
 
           cd ..
 
-          uv tool install "git+https://github.com/astral-sh/ecosystem-analyzer@27dd66d9e397d986ef9c631119ee09556eab8af9"
+          uv tool install "git+https://github.com/astral-sh/ecosystem-analyzer@1f560d07d672effae250e3d271da53d96c5260ff"
 
           ecosystem-analyzer \
             --repository ruff \
             diff \
+            --profile=release \
             --projects-old ruff/projects_old.txt \
             --projects-new ruff/projects_new.txt \
             --old old_commit \

.github/workflows/ty-ecosystem-report.yaml

@@ -29,7 +29,7 @@ jobs:
           persist-credentials: false
 
       - name: Install the latest version of uv
-        uses: astral-sh/setup-uv@4959332f0f014c5280e7eac8b70c90cb574c9f9b # v6.6.0
+        uses: astral-sh/setup-uv@557e51de59eb14aaaba2ed9621916900a91d50c6 # v6.6.1
 
       - uses: Swatinem/rust-cache@98c8021b550208e191a6a3145459bfc9fb29c4c0 # v2.8.0
         with:

BREAKING_CHANGES.md

@@ -1,5 +1,44 @@
 # Breaking Changes
 
+## 0.13.0
+
+- **Several rules can now add `from __future__ import annotations` automatically**
+
+    `TC001`, `TC002`, `TC003`, `RUF013`, and `UP037` now add `from __future__ import annotations` as part of their fixes when the
+    `lint.future-annotations` setting is enabled. This allows the rules to move
+    more imports into `TYPE_CHECKING` blocks (`TC001`, `TC002`, and `TC003`),
+    use PEP 604 union syntax on Python versions before 3.10 (`RUF013`), and
+    unquote more annotations (`UP037`).
+
+- **Full module paths are now used to verify first-party modules**
+
+    Ruff now checks that the full path to a module exists on disk before
+    categorizing it as a first-party import. This change makes first-party
+    import detection more accurate, helping to avoid false positives on local
+    directories with the same name as a third-party dependency, for example. See
+    the [FAQ
+    section](https://docs.astral.sh/ruff/faq/#how-does-ruff-determine-which-of-my-imports-are-first-party-third-party-etc) on import categorization for more details.
+
+- **Deprecated rules must now be selected by exact rule code**
+
+    Ruff will no longer activate deprecated rules selected by their group name
+    or prefix. As noted below, the two remaining deprecated rules were also
+    removed in this release, so this won't affect any current rules, but it will
+    still affect any deprecations in the future.
+
+- **The deprecated macOS configuration directory fallback has been removed**
+
+    Ruff will no longer look for a user-level configuration file at
+    `~/Library/Application Support/ruff/ruff.toml` on macOS. This feature was
+    deprecated in v0.5 in favor of using the [XDG
+    specification](https://specifications.freedesktop.org/basedir-spec/latest/)
+    (usually resolving to `~/.config/ruff/ruff.toml`), like on Linux. The
+    fallback and accompanying deprecation warning have now been removed.
+
+- **[`pandas-df-variable-name`](https://docs.astral.sh/ruff/rules/pandas-df-variable-name) (`PD901`) has been removed**
+
+- **[`non-pep604-isinstance`](https://docs.astral.sh/ruff/rules/non-pep604-isinstance) (`UP038`) has been removed**
+
 ## 0.12.0
 
 - **Detection of more syntax errors**

CHANGELOG.md

@@ -1,490 +1,119 @@
 # Changelog
 
-## 0.12.10
+## 0.13.0
 
-### Preview features
-
-- \[`flake8-simplify`\] Implement fix for `maxsplit` without separator (`SIM905`) ([#19851](https://github.com/astral-sh/ruff/pull/19851))
-- \[`flake8-use-pathlib`\] Add fixes for `PTH102` and `PTH103` ([#19514](https://github.com/astral-sh/ruff/pull/19514))
-
-### Bug fixes
-
-- \[`isort`\] Handle multiple continuation lines after module docstring (`I002`) ([#19818](https://github.com/astral-sh/ruff/pull/19818))
-- \[`pyupgrade`\] Avoid reporting `__future__` features as unnecessary when they are used (`UP010`) ([#19769](https://github.com/astral-sh/ruff/pull/19769))
-- \[`pyupgrade`\] Handle nested `Optional`s (`UP045`) ([#19770](https://github.com/astral-sh/ruff/pull/19770))
-
-### Rule changes
-
-- \[`pycodestyle`\] Make `E731` fix unsafe instead of display-only for class assignments ([#19700](https://github.com/astral-sh/ruff/pull/19700))
-- \[`pyflakes`\] Add secondary annotation showing previous definition (`F811`) ([#19900](https://github.com/astral-sh/ruff/pull/19900))
-
-### Documentation
-
-- Fix description of global config file discovery strategy ([#19188](https://github.com/astral-sh/ruff/pull/19188))
-- Update outdated links to <https://typing.python.org/en/latest/source/stubs.html> ([#19992](https://github.com/astral-sh/ruff/pull/19992))
-- \[`flake8-annotations`\] Remove unused import in example (`ANN401`) ([#20000](https://github.com/astral-sh/ruff/pull/20000))
-
-## 0.12.9
-
-### Preview features
-
-- \[`airflow`\] Add check for `airflow.secrets.cache.SecretCache` (`AIR301`) ([#17707](https://github.com/astral-sh/ruff/pull/17707))
-- \[`ruff`\] Offer a safe fix for multi-digit zeros (`RUF064`) ([#19847](https://github.com/astral-sh/ruff/pull/19847))
-
-### Bug fixes
-
-- \[`flake8-blind-except`\] Fix `BLE001` false-positive on `raise ... from None` ([#19755](https://github.com/astral-sh/ruff/pull/19755))
-- \[`flake8-comprehensions`\] Fix false positive for `C420` with attribute, subscript, or slice assignment targets ([#19513](https://github.com/astral-sh/ruff/pull/19513))
-- \[`flake8-simplify`\] Fix handling of U+001C..U+001F whitespace (`SIM905`) ([#19849](https://github.com/astral-sh/ruff/pull/19849))
-
-### Rule changes
-
-- \[`pylint`\] Use lowercase hex characters to match the formatter (`PLE2513`) ([#19808](https://github.com/astral-sh/ruff/pull/19808))
-
-### Documentation
-
-- Fix `lint.future-annotations` link ([#19876](https://github.com/astral-sh/ruff/pull/19876))
-
-### Other changes
-
-- Build `riscv64` binaries for release ([#19819](https://github.com/astral-sh/ruff/pull/19819))
-
-- Add rule code to error description in GitLab output ([#19896](https://github.com/astral-sh/ruff/pull/19896))
-
-- Improve rendering of the `full` output format ([#19415](https://github.com/astral-sh/ruff/pull/19415))
-
-    Below is an example diff for [`F401`](https://docs.astral.sh/ruff/rules/unused-import/):
-
-    ```diff
-    -unused.py:8:19: F401 [*] `pathlib` imported but unused
-    +F401 [*] `pathlib` imported but unused
-    +  --> unused.py:8:19
-        |
-      7 | # Unused, _not_ marked as required (due to the alias).
-      8 | import pathlib as non_alias
-    -   |                   ^^^^^^^^^ F401
-    +   |                   ^^^^^^^^^
-      9 |
-     10 | # Unused, marked as required.
-        |
-    -   = help: Remove unused import: `pathlib`
-    +help: Remove unused import: `pathlib`
-    ```
-
-    For now, the primary difference is the movement of the filename, line number, and column information to a second line in the header. This new representation will allow us to make further additions to Ruff's diagnostics, such as adding sub-diagnostics and multiple annotations to the same snippet.
-
-## 0.12.8
-
-### Preview features
-
-- \[`flake8-use-pathlib`\] Expand `PTH201` to check all `PurePath` subclasses ([#19440](https://github.com/astral-sh/ruff/pull/19440))
-
-### Bug fixes
-
-- \[`flake8-blind-except`\] Change `BLE001` to correctly parse exception tuples ([#19747](https://github.com/astral-sh/ruff/pull/19747))
-- \[`flake8-errmsg`\] Exclude `typing.cast` from `EM101` ([#19656](https://github.com/astral-sh/ruff/pull/19656))
-- \[`flake8-simplify`\] Fix raw string handling in `SIM905` for embedded quotes ([#19591](https://github.com/astral-sh/ruff/pull/19591))
-- \[`flake8-import-conventions`\] Avoid false positives for NFKC-normalized `__debug__` import aliases in `ICN001` ([#19411](https://github.com/astral-sh/ruff/pull/19411))
-- \[`isort`\] Fix syntax error after docstring ending with backslash (`I002`) ([#19505](https://github.com/astral-sh/ruff/pull/19505))
-- \[`pylint`\] Mark `PLC0207` fixes as unsafe when `*args` unpacking is present ([#19679](https://github.com/astral-sh/ruff/pull/19679))
-- \[`pyupgrade`\] Prevent infinite loop with `I002` (`UP010`, `UP035`) ([#19413](https://github.com/astral-sh/ruff/pull/19413))
-- \[`ruff`\] Parenthesize generator expressions in f-strings (`RUF010`) ([#19434](https://github.com/astral-sh/ruff/pull/19434))
-
-### Rule changes
-
-- \[`eradicate`\] Don't flag `pyrefly` pragmas as unused code (`ERA001`) ([#19731](https://github.com/astral-sh/ruff/pull/19731))
-
-### Documentation
-
-- Replace "associative" with "commutative" in docs for `RUF036` ([#19706](https://github.com/astral-sh/ruff/pull/19706))
-- Fix copy and line separator colors in dark mode ([#19630](https://github.com/astral-sh/ruff/pull/19630))
-- Fix link to `typing` documentation ([#19648](https://github.com/astral-sh/ruff/pull/19648))
-- \[`refurb`\] Make more examples error out-of-the-box ([#19695](https://github.com/astral-sh/ruff/pull/19695),[#19673](https://github.com/astral-sh/ruff/pull/19673),[#19672](https://github.com/astral-sh/ruff/pull/19672))
-
-### Other changes
-
-- Include column numbers in GitLab output format ([#19708](https://github.com/astral-sh/ruff/pull/19708))
-- Always expand tabs to four spaces in diagnostics ([#19618](https://github.com/astral-sh/ruff/pull/19618))
-- Update pre-commit's `ruff` id ([#19654](https://github.com/astral-sh/ruff/pull/19654))
-
-## 0.12.7
-
-This is a follow-up release to 0.12.6. Because of an issue in the package metadata, 0.12.6 failed to publish fully to PyPI and has been yanked. Similarly, there is no GitHub release or Git tag for 0.12.6. The contents of the 0.12.7 release are identical to 0.12.6, except for the updated metadata.
-
-## 0.12.6
-
-### Preview features
-
-- \[`flake8-commas`\] Add support for trailing comma checks in type parameter lists (`COM812`, `COM819`) ([#19390](https://github.com/astral-sh/ruff/pull/19390))
-- \[`pylint`\] Implement auto-fix for `missing-maxsplit-arg` (`PLC0207`) ([#19387](https://github.com/astral-sh/ruff/pull/19387))
-- \[`ruff`\] Offer fixes for `RUF039` in more cases ([#19065](https://github.com/astral-sh/ruff/pull/19065))
-
-### Bug fixes
-
-- Support `.pyi` files in ruff analyze graph ([#19611](https://github.com/astral-sh/ruff/pull/19611))
-- \[`flake8-pyi`\] Preserve inline comment in ellipsis removal (`PYI013`) ([#19399](https://github.com/astral-sh/ruff/pull/19399))
-- \[`perflint`\] Ignore rule if target is `global` or `nonlocal` (`PERF401`) ([#19539](https://github.com/astral-sh/ruff/pull/19539))
-- \[`pyupgrade`\] Fix `UP030` to avoid modifying double curly braces in format strings ([#19378](https://github.com/astral-sh/ruff/pull/19378))
-- \[`refurb`\] Ignore decorated functions for `FURB118` ([#19339](https://github.com/astral-sh/ruff/pull/19339))
-- \[`refurb`\] Mark `int` and `bool` cases for `Decimal.from_float` as safe fixes (`FURB164`) ([#19468](https://github.com/astral-sh/ruff/pull/19468))
-- \[`ruff`\] Fix `RUF033` for named default expressions ([#19115](https://github.com/astral-sh/ruff/pull/19115))
-
-### Rule changes
-
-- \[`flake8-blind-except`\] Change `BLE001` to permit `logging.critical(..., exc_info=True)` ([#19520](https://github.com/astral-sh/ruff/pull/19520))
-
-### Performance
-
-- Add support for specifying minimum dots in detected string imports ([#19538](https://github.com/astral-sh/ruff/pull/19538))
-
-## 0.12.5
-
-### Preview features
-
-- \[`flake8-use-pathlib`\] Add autofix for `PTH101`, `PTH104`, `PTH105`, `PTH121` ([#19404](https://github.com/astral-sh/ruff/pull/19404))
-- \[`ruff`\] Support byte strings (`RUF055`) ([#18926](https://github.com/astral-sh/ruff/pull/18926))
-
-### Bug fixes
-
-- Fix `unreachable` panic in parser ([#19183](https://github.com/astral-sh/ruff/pull/19183))
-- \[`flake8-pyi`\] Skip fix if all `Union` members are `None` (`PYI016`) ([#19416](https://github.com/astral-sh/ruff/pull/19416))
-- \[`perflint`\] Parenthesize generator expressions (`PERF401`) ([#19325](https://github.com/astral-sh/ruff/pull/19325))
-- \[`pylint`\] Handle empty comments after line continuation (`PLR2044`) ([#19405](https://github.com/astral-sh/ruff/pull/19405))
-
-### Rule changes
-
-- \[`pep8-naming`\] Fix `N802` false positives for `CGIHTTPRequestHandler` and `SimpleHTTPRequestHandler` ([#19432](https://github.com/astral-sh/ruff/pull/19432))
-
-## 0.12.4
-
-### Preview features
-
-- \[`flake8-type-checking`, `pyupgrade`, `ruff`\] Add `from __future__ import annotations` when it would allow new fixes (`TC001`, `TC002`, `TC003`, `UP037`, `RUF013`) ([#19100](https://github.com/astral-sh/ruff/pull/19100))
-- \[`flake8-use-pathlib`\] Add autofix for `PTH109` ([#19245](https://github.com/astral-sh/ruff/pull/19245))
-- \[`pylint`\] Detect indirect `pathlib.Path` usages for `unspecified-encoding` (`PLW1514`) ([#19304](https://github.com/astral-sh/ruff/pull/19304))
-
-### Bug fixes
-
-- \[`flake8-bugbear`\] Fix `B017` false negatives for keyword exception arguments ([#19217](https://github.com/astral-sh/ruff/pull/19217))
-- \[`flake8-use-pathlib`\] Fix false negative on direct `Path()` instantiation (`PTH210`) ([#19388](https://github.com/astral-sh/ruff/pull/19388))
-- \[`flake8-django`\] Fix `DJ008` false positive for abstract models with type-annotated `abstract` field ([#19221](https://github.com/astral-sh/ruff/pull/19221))
-- \[`isort`\] Fix `I002` import insertion after docstring with multiple string statements ([#19222](https://github.com/astral-sh/ruff/pull/19222))
-- \[`isort`\] Treat form feed as valid whitespace before a semicolon ([#19343](https://github.com/astral-sh/ruff/pull/19343))
-- \[`pydoclint`\] Fix `SyntaxError` from fixes with line continuations (`D201`, `D202`) ([#19246](https://github.com/astral-sh/ruff/pull/19246))
-- \[`refurb`\] `FURB164` fix should validate arguments and should usually be marked unsafe ([#19136](https://github.com/astral-sh/ruff/pull/19136))
-
-### Rule changes
-
-- \[`flake8-use-pathlib`\] Skip single dots for `invalid-pathlib-with-suffix` (`PTH210`) on versions >= 3.14 ([#19331](https://github.com/astral-sh/ruff/pull/19331))
-- \[`pep8_naming`\] Avoid false positives on standard library functions with uppercase names (`N802`) ([#18907](https://github.com/astral-sh/ruff/pull/18907))
-- \[`pycodestyle`\] Handle brace escapes for t-strings in logical lines ([#19358](https://github.com/astral-sh/ruff/pull/19358))
-- \[`pylint`\] Extend invalid string character rules to include t-strings ([#19355](https://github.com/astral-sh/ruff/pull/19355))
-- \[`ruff`\] Allow `strict` kwarg when checking for `starmap-zip` (`RUF058`) in Python 3.14+ ([#19333](https://github.com/astral-sh/ruff/pull/19333))
-
-### Documentation
-
-- \[`flake8-type-checking`\] Make `TC010` docs example more realistic ([#19356](https://github.com/astral-sh/ruff/pull/19356))
-- Make more documentation examples error out-of-the-box ([#19288](https://github.com/astral-sh/ruff/pull/19288),[#19272](https://github.com/astral-sh/ruff/pull/19272),[#19291](https://github.com/astral-sh/ruff/pull/19291),[#19296](https://github.com/astral-sh/ruff/pull/19296),[#19292](https://github.com/astral-sh/ruff/pull/19292),[#19295](https://github.com/astral-sh/ruff/pull/19295),[#19297](https://github.com/astral-sh/ruff/pull/19297),[#19309](https://github.com/astral-sh/ruff/pull/19309))
-
-## 0.12.3
-
-### Preview features
-
-- \[`flake8-bugbear`\] Support non-context-manager calls in `B017` ([#19063](https://github.com/astral-sh/ruff/pull/19063))
-- \[`flake8-use-pathlib`\] Add autofixes for `PTH100`, `PTH106`, `PTH107`, `PTH108`, `PTH110`, `PTH111`, `PTH112`, `PTH113`, `PTH114`, `PTH115`, `PTH117`, `PTH119`, `PTH120` ([#19213](https://github.com/astral-sh/ruff/pull/19213))
-- \[`flake8-use-pathlib`\] Add autofixes for `PTH203`, `PTH204`, `PTH205` ([#18922](https://github.com/astral-sh/ruff/pull/18922))
-
-### Bug fixes
-
-- \[`flake8-return`\] Fix false-positive for variables used inside nested functions in `RET504` ([#18433](https://github.com/astral-sh/ruff/pull/18433))
-- Treat form feed as valid whitespace before a line continuation ([#19220](https://github.com/astral-sh/ruff/pull/19220))
-- \[`flake8-type-checking`\] Fix syntax error introduced by fix (`TC008`) ([#19150](https://github.com/astral-sh/ruff/pull/19150))
-- \[`pyupgrade`\] Keyword arguments in `super` should suppress the `UP008` fix ([#19131](https://github.com/astral-sh/ruff/pull/19131))
-
-### Documentation
-
-- \[`flake8-pyi`\] Make example error out-of-the-box (`PYI007`, `PYI008`) ([#19103](https://github.com/astral-sh/ruff/pull/19103))
-- \[`flake8-simplify`\] Make example error out-of-the-box (`SIM116`) ([#19111](https://github.com/astral-sh/ruff/pull/19111))
-- \[`flake8-type-checking`\] Make example error out-of-the-box (`TC001`) ([#19151](https://github.com/astral-sh/ruff/pull/19151))
-- \[`flake8-use-pathlib`\] Make example error out-of-the-box (`PTH210`) ([#19189](https://github.com/astral-sh/ruff/pull/19189))
-- \[`pycodestyle`\] Make example error out-of-the-box (`E272`) ([#19191](https://github.com/astral-sh/ruff/pull/19191))
-- \[`pycodestyle`\] Make example not raise unnecessary `SyntaxError` (`E114`) ([#19190](https://github.com/astral-sh/ruff/pull/19190))
-- \[`pydoclint`\] Make example error out-of-the-box (`DOC501`) ([#19218](https://github.com/astral-sh/ruff/pull/19218))
-- \[`pylint`, `pyupgrade`\] Fix syntax errors in examples (`PLW1501`, `UP028`) ([#19127](https://github.com/astral-sh/ruff/pull/19127))
-- \[`pylint`\] Update `missing-maxsplit-arg` docs and error to suggest proper usage (`PLC0207`) ([#18949](https://github.com/astral-sh/ruff/pull/18949))
-- \[`flake8-bandit`\] Make example error out-of-the-box (`S412`) ([#19241](https://github.com/astral-sh/ruff/pull/19241))
-
-## 0.12.2
-
-### Preview features
-
-- \[`flake8-pyi`\] Expand `Optional[A]` to `A | None` (`PYI016`) ([#18572](https://github.com/astral-sh/ruff/pull/18572))
-- \[`pyupgrade`\] Mark `UP008` fix safe if no comments are in range ([#18683](https://github.com/astral-sh/ruff/pull/18683))
-
-### Bug fixes
-
-- \[`flake8-comprehensions`\] Fix `C420` to prepend whitespace when needed ([#18616](https://github.com/astral-sh/ruff/pull/18616))
-- \[`perflint`\] Fix `PERF403` panic on attribute or subscription loop variable ([#19042](https://github.com/astral-sh/ruff/pull/19042))
-- \[`pydocstyle`\] Fix `D413` infinite loop for parenthesized docstring ([#18930](https://github.com/astral-sh/ruff/pull/18930))
-- \[`pylint`\] Fix `PLW0108` autofix introducing a syntax error when the lambda's body contains an assignment expression ([#18678](https://github.com/astral-sh/ruff/pull/18678))
-- \[`refurb`\] Fix false positive on empty tuples (`FURB168`) ([#19058](https://github.com/astral-sh/ruff/pull/19058))
-- \[`ruff`\] Allow more `field` calls from `attrs` (`RUF009`) ([#19021](https://github.com/astral-sh/ruff/pull/19021))
-- \[`ruff`\] Fix syntax error introduced for an empty string followed by a u-prefixed string (`UP025`) ([#18899](https://github.com/astral-sh/ruff/pull/18899))
-
-### Rule changes
-
-- \[`flake8-executable`\] Allow `uvx` in shebang line (`EXE003`) ([#18967](https://github.com/astral-sh/ruff/pull/18967))
-- \[`pandas`\] Avoid flagging `PD002` if `pandas` is not imported ([#18963](https://github.com/astral-sh/ruff/pull/18963))
-- \[`pyupgrade`\] Avoid PEP-604 unions with `typing.NamedTuple` (`UP007`, `UP045`) ([#18682](https://github.com/astral-sh/ruff/pull/18682))
-
-### Documentation
-
-- Document link between `import-outside-top-level (PLC0415)` and `lint.flake8-tidy-imports.banned-module-level-imports` ([#18733](https://github.com/astral-sh/ruff/pull/18733))
-- Fix description of the `format.skip-magic-trailing-comma` example ([#19095](https://github.com/astral-sh/ruff/pull/19095))
-- \[`airflow`\] Make `AIR302` example error out-of-the-box ([#18988](https://github.com/astral-sh/ruff/pull/18988))
-- \[`airflow`\] Make `AIR312` example error out-of-the-box ([#18989](https://github.com/astral-sh/ruff/pull/18989))
-- \[`flake8-annotations`\] Make `ANN401` example error out-of-the-box ([#18974](https://github.com/astral-sh/ruff/pull/18974))
-- \[`flake8-async`\] Make `ASYNC100` example error out-of-the-box ([#18993](https://github.com/astral-sh/ruff/pull/18993))
-- \[`flake8-async`\] Make `ASYNC105` example error out-of-the-box ([#19002](https://github.com/astral-sh/ruff/pull/19002))
-- \[`flake8-async`\] Make `ASYNC110` example error out-of-the-box ([#18975](https://github.com/astral-sh/ruff/pull/18975))
-- \[`flake8-async`\] Make `ASYNC210` example error out-of-the-box ([#18977](https://github.com/astral-sh/ruff/pull/18977))
-- \[`flake8-async`\] Make `ASYNC220`, `ASYNC221`, and `ASYNC222` examples error out-of-the-box ([#18978](https://github.com/astral-sh/ruff/pull/18978))
-- \[`flake8-async`\] Make `ASYNC251` example error out-of-the-box ([#18990](https://github.com/astral-sh/ruff/pull/18990))
-- \[`flake8-bandit`\] Make `S201` example error out-of-the-box ([#19017](https://github.com/astral-sh/ruff/pull/19017))
-- \[`flake8-bandit`\] Make `S604` and `S609` examples error out-of-the-box ([#19049](https://github.com/astral-sh/ruff/pull/19049))
-- \[`flake8-bugbear`\] Make `B028` example error out-of-the-box ([#19054](https://github.com/astral-sh/ruff/pull/19054))
-- \[`flake8-bugbear`\] Make `B911` example error out-of-the-box ([#19051](https://github.com/astral-sh/ruff/pull/19051))
-- \[`flake8-datetimez`\] Make `DTZ011` example error out-of-the-box ([#19055](https://github.com/astral-sh/ruff/pull/19055))
-- \[`flake8-datetimez`\] Make `DTZ901` example error out-of-the-box ([#19056](https://github.com/astral-sh/ruff/pull/19056))
-- \[`flake8-pyi`\] Make `PYI032` example error out-of-the-box ([#19061](https://github.com/astral-sh/ruff/pull/19061))
-- \[`flake8-pyi`\] Make example error out-of-the-box (`PYI014`, `PYI015`) ([#19097](https://github.com/astral-sh/ruff/pull/19097))
-- \[`flake8-pyi`\] Make example error out-of-the-box (`PYI042`) ([#19101](https://github.com/astral-sh/ruff/pull/19101))
-- \[`flake8-pyi`\] Make example error out-of-the-box (`PYI059`) ([#19080](https://github.com/astral-sh/ruff/pull/19080))
-- \[`flake8-pyi`\] Make example error out-of-the-box (`PYI062`) ([#19079](https://github.com/astral-sh/ruff/pull/19079))
-- \[`flake8-pytest-style`\] Make example error out-of-the-box (`PT023`) ([#19104](https://github.com/astral-sh/ruff/pull/19104))
-- \[`flake8-pytest-style`\] Make example error out-of-the-box (`PT030`) ([#19105](https://github.com/astral-sh/ruff/pull/19105))
-- \[`flake8-quotes`\] Make example error out-of-the-box (`Q003`) ([#19106](https://github.com/astral-sh/ruff/pull/19106))
-- \[`flake8-simplify`\] Make example error out-of-the-box (`SIM110`) ([#19113](https://github.com/astral-sh/ruff/pull/19113))
-- \[`flake8-simplify`\] Make example error out-of-the-box (`SIM113`) ([#19109](https://github.com/astral-sh/ruff/pull/19109))
-- \[`flake8-simplify`\] Make example error out-of-the-box (`SIM401`) ([#19110](https://github.com/astral-sh/ruff/pull/19110))
-- \[`pyflakes`\] Fix backslash in docs (`F621`) ([#19098](https://github.com/astral-sh/ruff/pull/19098))
-- \[`pylint`\] Fix `PLC0415` example ([#18970](https://github.com/astral-sh/ruff/pull/18970))
-
-## 0.12.1
-
-### Preview features
-
-- \[`flake8-errmsg`\] Extend `EM101` to support byte strings ([#18867](https://github.com/astral-sh/ruff/pull/18867))
-- \[`flake8-use-pathlib`\] Add autofix for `PTH202` ([#18763](https://github.com/astral-sh/ruff/pull/18763))
-- \[`pygrep-hooks`\] Add `AsyncMock` methods to `invalid-mock-access` (`PGH005`) ([#18547](https://github.com/astral-sh/ruff/pull/18547))
-- \[`pylint`\] Ignore `__init__.py` files in (`PLC0414`) ([#18400](https://github.com/astral-sh/ruff/pull/18400))
-- \[`ruff`\] Trigger `RUF037` for empty string and byte strings ([#18862](https://github.com/astral-sh/ruff/pull/18862))
-- [formatter] Fix missing blank lines before decorated classes in `.pyi` files ([#18888](https://github.com/astral-sh/ruff/pull/18888))
-
-### Bug fixes
-
-- Avoid generating diagnostics with per-file ignores ([#18801](https://github.com/astral-sh/ruff/pull/18801))
-- Handle parenthesized arguments in `remove_argument` ([#18805](https://github.com/astral-sh/ruff/pull/18805))
-- \[`flake8-logging`\] Avoid false positive for `exc_info=True` outside `logger.exception` (`LOG014`) ([#18737](https://github.com/astral-sh/ruff/pull/18737))
-- \[`flake8-pytest-style`\] Enforce `pytest` import for decorators ([#18779](https://github.com/astral-sh/ruff/pull/18779))
-- \[`flake8-pytest-style`\] Mark autofix for `PT001` and `PT023` as unsafe if there's comments in the decorator ([#18792](https://github.com/astral-sh/ruff/pull/18792))
-- \[`flake8-pytest-style`\] `PT001`/`PT023` fix makes syntax error on parenthesized decorator ([#18782](https://github.com/astral-sh/ruff/pull/18782))
-- \[`flake8-raise`\] Make fix unsafe if it deletes comments (`RSE102`) ([#18788](https://github.com/astral-sh/ruff/pull/18788))
-- \[`flake8-simplify`\] Fix `SIM911` autofix creating a syntax error ([#18793](https://github.com/astral-sh/ruff/pull/18793))
-- \[`flake8-simplify`\] Fix false negatives for shadowed bindings (`SIM910`, `SIM911`) ([#18794](https://github.com/astral-sh/ruff/pull/18794))
-- \[`flake8-simplify`\] Preserve original behavior for `except ()` and bare `except` (`SIM105`) ([#18213](https://github.com/astral-sh/ruff/pull/18213))
-- \[`flake8-pyi`\] Fix `PYI041`'s fix causing `TypeError` with `None | None | ...` ([#18637](https://github.com/astral-sh/ruff/pull/18637))
-- \[`perflint`\] Fix `PERF101` autofix creating a syntax error and mark autofix as unsafe if there are comments in the `list` call expr ([#18803](https://github.com/astral-sh/ruff/pull/18803))
-- \[`perflint`\] Fix false negative in `PERF401` ([#18866](https://github.com/astral-sh/ruff/pull/18866))
-- \[`pylint`\] Avoid flattening nested `min`/`max` when outer call has single argument (`PLW3301`) ([#16885](https://github.com/astral-sh/ruff/pull/16885))
-- \[`pylint`\] Fix `PLC2801` autofix creating a syntax error ([#18857](https://github.com/astral-sh/ruff/pull/18857))
-- \[`pylint`\] Mark `PLE0241` autofix as unsafe if there's comments in the base classes ([#18832](https://github.com/astral-sh/ruff/pull/18832))
-- \[`pylint`\] Suppress `PLE2510`/`PLE2512`/`PLE2513`/`PLE2514`/`PLE2515` autofix if the text contains an odd number of backslashes ([#18856](https://github.com/astral-sh/ruff/pull/18856))
-- \[`refurb`\] Detect more exotic float literals in `FURB164` ([#18925](https://github.com/astral-sh/ruff/pull/18925))
-- \[`refurb`\] Fix `FURB163` autofix creating a syntax error for `yield` expressions ([#18756](https://github.com/astral-sh/ruff/pull/18756))
-- \[`refurb`\] Mark `FURB129` autofix as unsafe if there's comments in the `readlines` call ([#18858](https://github.com/astral-sh/ruff/pull/18858))
-- \[`ruff`\] Fix false positives and negatives in `RUF010` ([#18690](https://github.com/astral-sh/ruff/pull/18690))
-- Fix casing of `analyze.direction` variant names ([#18892](https://github.com/astral-sh/ruff/pull/18892))
-
-### Rule changes
-
-- Fix f-string interpolation escaping in generated fixes ([#18882](https://github.com/astral-sh/ruff/pull/18882))
-- \[`flake8-return`\] Mark `RET501` fix unsafe if comments are inside ([#18780](https://github.com/astral-sh/ruff/pull/18780))
-- \[`flake8-async`\] Fix detection for large integer sleep durations in `ASYNC116` rule ([#18767](https://github.com/astral-sh/ruff/pull/18767))
-- \[`flake8-async`\] Mark autofix for `ASYNC115` as unsafe if the call expression contains comments ([#18753](https://github.com/astral-sh/ruff/pull/18753))
-- \[`flake8-bugbear`\] Mark autofix for `B004` as unsafe if the `hasattr` call expr contains comments ([#18755](https://github.com/astral-sh/ruff/pull/18755))
-- \[`flake8-comprehension`\] Mark autofix for `C420` as unsafe if there's comments inside the dict comprehension ([#18768](https://github.com/astral-sh/ruff/pull/18768))
-- \[`flake8-comprehensions`\] Handle template strings for comprehension fixes ([#18710](https://github.com/astral-sh/ruff/pull/18710))
-- \[`flake8-future-annotations`\] Add autofix (`FA100`) ([#18903](https://github.com/astral-sh/ruff/pull/18903))
-- \[`pyflakes`\] Mark `F504`/`F522`/`F523` autofix as unsafe if there's a call with side effect ([#18839](https://github.com/astral-sh/ruff/pull/18839))
-- \[`pylint`\] Allow fix with comments and document performance implications (`PLW3301`) ([#18936](https://github.com/astral-sh/ruff/pull/18936))
-- \[`pylint`\] Detect more exotic `NaN` literals in `PLW0177` ([#18630](https://github.com/astral-sh/ruff/pull/18630))
-- \[`pylint`\] Fix `PLC1802` autofix creating a syntax error and mark autofix as unsafe if there's comments in the `len` call ([#18836](https://github.com/astral-sh/ruff/pull/18836))
-- \[`pyupgrade`\] Extend version detection to include `sys.version_info.major` (`UP036`) ([#18633](https://github.com/astral-sh/ruff/pull/18633))
-- \[`ruff`\] Add lint rule `RUF064` for calling `chmod` with non-octal integers ([#18541](https://github.com/astral-sh/ruff/pull/18541))
-- \[`ruff`\] Added `cls.__dict__.get('__annotations__')` check (`RUF063`) ([#18233](https://github.com/astral-sh/ruff/pull/18233))
-- \[`ruff`\] Frozen `dataclass` default should be valid (`RUF009`) ([#18735](https://github.com/astral-sh/ruff/pull/18735))
-
-### Server
-
-- Consider virtual path for various server actions ([#18910](https://github.com/astral-sh/ruff/pull/18910))
-
-### Documentation
-
-- Add fix safety sections ([#18940](https://github.com/astral-sh/ruff/pull/18940),[#18841](https://github.com/astral-sh/ruff/pull/18841),[#18802](https://github.com/astral-sh/ruff/pull/18802),[#18837](https://github.com/astral-sh/ruff/pull/18837),[#18800](https://github.com/astral-sh/ruff/pull/18800),[#18415](https://github.com/astral-sh/ruff/pull/18415),[#18853](https://github.com/astral-sh/ruff/pull/18853),[#18842](https://github.com/astral-sh/ruff/pull/18842))
-- Use updated pre-commit id ([#18718](https://github.com/astral-sh/ruff/pull/18718))
-- \[`perflint`\] Small docs improvement to `PERF401` ([#18786](https://github.com/astral-sh/ruff/pull/18786))
-- \[`pyupgrade`\]: Use `super()`, not `__super__` in error messages (`UP008`) ([#18743](https://github.com/astral-sh/ruff/pull/18743))
-- \[`flake8-pie`\] Small docs fix to `PIE794` ([#18829](https://github.com/astral-sh/ruff/pull/18829))
-- \[`flake8-pyi`\] Correct `collections-named-tuple` example to use PascalCase assignment ([#16884](https://github.com/astral-sh/ruff/pull/16884))
-- \[`flake8-pie`\] Add note on type checking benefits to `unnecessary-dict-kwargs` (`PIE804`) ([#18666](https://github.com/astral-sh/ruff/pull/18666))
-- \[`pycodestyle`\] Clarify PEP 8 relationship to `whitespace-around-operator` rules ([#18870](https://github.com/astral-sh/ruff/pull/18870))
-
-### Other changes
-
-- Disallow newlines in format specifiers of single quoted f- or t-strings ([#18708](https://github.com/astral-sh/ruff/pull/18708))
-- \[`flake8-logging`\] Add fix safety section to `LOG002` ([#18840](https://github.com/astral-sh/ruff/pull/18840))
-- \[`pyupgrade`\] Add fix safety section to `UP010` ([#18838](https://github.com/astral-sh/ruff/pull/18838))
-
-## 0.12.0
-
-Check out the [blog post](https://astral.sh/blog/ruff-v0.12.0) for a migration
+Check out the [blog post](https://astral.sh/blog/ruff-v0.13.0) for a migration
 guide and overview of the changes!
 
 ### Breaking changes
 
-- **Detection of more syntax errors**
+- **Several rules can now add `from __future__ import annotations` automatically**
 
-    Ruff now detects version-related syntax errors, such as the use of the `match`
-    statement on Python versions before 3.10, and syntax errors emitted by
-    CPython's compiler, such as irrefutable `match` patterns before the final
-    `case` arm.
+    `TC001`, `TC002`, `TC003`, `RUF013`, and `UP037` now add `from __future__ import annotations` as part of their fixes when the
+    `lint.future-annotations` setting is enabled. This allows the rules to move
+    more imports into `TYPE_CHECKING` blocks (`TC001`, `TC002`, and `TC003`),
+    use PEP 604 union syntax on Python versions before 3.10 (`RUF013`), and
+    unquote more annotations (`UP037`).
 
-- **New default Python version handling for syntax errors**
+- **Full module paths are now used to verify first-party modules**
 
-    Ruff will default to the *latest* supported Python version (3.13) when
-    checking for the version-related syntax errors mentioned above to prevent
-    false positives in projects without a Python version configured. The default
-    in all other cases, like applying lint rules, is unchanged and remains at the
-    minimum supported Python version (3.9).
+    Ruff now checks that the full path to a module exists on disk before
+    categorizing it as a first-party import. This change makes first-party
+    import detection more accurate, helping to avoid false positives on local
+    directories with the same name as a third-party dependency, for example. See
+    the [FAQ
+    section](https://docs.astral.sh/ruff/faq/#how-does-ruff-determine-which-of-my-imports-are-first-party-third-party-etc) on import categorization for more details.
 
-- **Updated f-string formatting**
+- **Deprecated rules must now be selected by exact rule code**
 
-    Ruff now formats multi-line f-strings with format specifiers to avoid adding a
-    line break after the format specifier. This addresses a change to the Python
-    grammar in version 3.13.4 that made such a line break a syntax error.
+    Ruff will no longer activate deprecated rules selected by their group name
+    or prefix. As noted below, the two remaining deprecated rules were also
+    removed in this release, so this won't affect any current rules, but it will
+    still affect any deprecations in the future.
 
-- **`rust-toolchain.toml` is no longer included in source distributions**
+- **The deprecated macOS configuration directory fallback has been removed**
 
-    The `rust-toolchain.toml` is used to specify a higher Rust version than Ruff's
-    minimum supported Rust version (MSRV) for development and building release
-    artifacts. However, when present in source distributions, it would also cause
-    downstream package maintainers to pull in the same Rust toolchain, even if
-    their available toolchain was MSRV-compatible.
+    Ruff will no longer look for a user-level configuration file at
+    `~/Library/Application Support/ruff/ruff.toml` on macOS. This feature was
+    deprecated in v0.5 in favor of using the [XDG
+    specification](https://specifications.freedesktop.org/basedir-spec/latest/)
+    (usually resolving to `~/.config/ruff/ruff.toml`), like on Linux. The
+    fallback and accompanying deprecation warning have now been removed.
 
 ### Removed Rules
 
 The following rules have been removed:
 
-- [`suspicious-xmle-tree-usage`](https://docs.astral.sh/ruff/rules/suspicious-xmle-tree-usage/)
-    (`S320`)
-
-### Deprecated Rules
-
-The following rules have been deprecated:
-
-- [`pandas-df-variable-name`](https://docs.astral.sh/ruff/rules/pandas-df-variable-name/)
+- [`pandas-df-variable-name`](https://docs.astral.sh/ruff/rules/pandas-df-variable-name) (`PD901`)
+- [`non-pep604-isinstance`](https://docs.astral.sh/ruff/rules/non-pep604-isinstance) (`UP038`)
 
 ### Stabilization
 
 The following rules have been stabilized and are no longer in preview:
 
-- [`for-loop-writes`](https://docs.astral.sh/ruff/rules/for-loop-writes) (`FURB122`)
-- [`check-and-remove-from-set`](https://docs.astral.sh/ruff/rules/check-and-remove-from-set) (`FURB132`)
-- [`verbose-decimal-constructor`](https://docs.astral.sh/ruff/rules/verbose-decimal-constructor) (`FURB157`)
-- [`fromisoformat-replace-z`](https://docs.astral.sh/ruff/rules/fromisoformat-replace-z) (`FURB162`)
-- [`int-on-sliced-str`](https://docs.astral.sh/ruff/rules/int-on-sliced-str) (`FURB166`)
-- [`exc-info-outside-except-handler`](https://docs.astral.sh/ruff/rules/exc-info-outside-except-handler) (`LOG014`)
-- [`import-outside-top-level`](https://docs.astral.sh/ruff/rules/import-outside-top-level) (`PLC0415`)
-- [`unnecessary-dict-index-lookup`](https://docs.astral.sh/ruff/rules/unnecessary-dict-index-lookup) (`PLR1733`)
-- [`nan-comparison`](https://docs.astral.sh/ruff/rules/nan-comparison) (`PLW0177`)
-- [`eq-without-hash`](https://docs.astral.sh/ruff/rules/eq-without-hash) (`PLW1641`)
-- [`pytest-parameter-with-default-argument`](https://docs.astral.sh/ruff/rules/pytest-parameter-with-default-argument) (`PT028`)
-- [`pytest-warns-too-broad`](https://docs.astral.sh/ruff/rules/pytest-warns-too-broad) (`PT030`)
-- [`pytest-warns-with-multiple-statements`](https://docs.astral.sh/ruff/rules/pytest-warns-with-multiple-statements) (`PT031`)
-- [`invalid-formatter-suppression-comment`](https://docs.astral.sh/ruff/rules/invalid-formatter-suppression-comment) (`RUF028`)
-- [`dataclass-enum`](https://docs.astral.sh/ruff/rules/dataclass-enum) (`RUF049`)
-- [`class-with-mixed-type-vars`](https://docs.astral.sh/ruff/rules/class-with-mixed-type-vars) (`RUF053`)
-- [`unnecessary-round`](https://docs.astral.sh/ruff/rules/unnecessary-round) (`RUF057`)
-- [`starmap-zip`](https://docs.astral.sh/ruff/rules/starmap-zip) (`RUF058`)
-- [`non-pep604-annotation-optional`] (`UP045`)
-- [`non-pep695-generic-class`](https://docs.astral.sh/ruff/rules/non-pep695-generic-class) (`UP046`)
-- [`non-pep695-generic-function`](https://docs.astral.sh/ruff/rules/non-pep695-generic-function) (`UP047`)
-- [`private-type-parameter`](https://docs.astral.sh/ruff/rules/private-type-parameter) (`UP049`)
+- [`airflow-dag-no-schedule-argument`](https://docs.astral.sh/ruff/rules/airflow-dag-no-schedule-argument)
+    (`AIR002`)
+- [`airflow3-removal`](https://docs.astral.sh/ruff/rules/airflow3-removal) (`AIR301`)
+- [`airflow3-moved-to-provider`](https://docs.astral.sh/ruff/rules/airflow3-moved-to-provider)
+    (`AIR302`)
+- [`airflow3-suggested-update`](https://docs.astral.sh/ruff/rules/airflow3-suggested-update)
+    (`AIR311`)
+- [`airflow3-suggested-to-move-to-provider`](https://docs.astral.sh/ruff/rules/airflow3-suggested-to-move-to-provider)
+    (`AIR312`)
+- [`long-sleep-not-forever`](https://docs.astral.sh/ruff/rules/long-sleep-not-forever) (`ASYNC116`)
+- [`f-string-number-format`](https://docs.astral.sh/ruff/rules/f-string-number-format) (`FURB116`)
+- [`os-symlink`](https://docs.astral.sh/ruff/rules/os-symlink) (`PTH211`)
+- [`generic-not-last-base-class`](https://docs.astral.sh/ruff/rules/generic-not-last-base-class)
+    (`PYI059`)
+- [`redundant-none-literal`](https://docs.astral.sh/ruff/rules/redundant-none-literal) (`PYI061`)
+- [`pytest-raises-ambiguous-pattern`](https://docs.astral.sh/ruff/rules/pytest-raises-ambiguous-pattern)
+    (`RUF043`)
+- [`unused-unpacked-variable`](https://docs.astral.sh/ruff/rules/unused-unpacked-variable)
+    (`RUF059`)
+- [`useless-class-metaclass-type`](https://docs.astral.sh/ruff/rules/useless-class-metaclass-type)
+    (`UP050`)
 
 The following behaviors have been stabilized:
 
-- [`collection-literal-concatenation`] (`RUF005`) now recognizes slices, in
-    addition to list literals and variables.
-- The fix for [`readlines-in-for`] (`FURB129`) is now marked as always safe.
-- [`if-else-block-instead-of-if-exp`] (`SIM108`) will now further simplify
-    expressions to use `or` instead of an `if` expression, where possible.
-- [`unused-noqa`] (`RUF100`) now checks for file-level `noqa` comments as well
-    as inline comments.
-- [`subprocess-without-shell-equals-true`] (`S603`) now accepts literal strings,
-    as well as lists and tuples of literal strings, as trusted input.
-- [`boolean-type-hint-positional-argument`] (`FBT001`) now applies to types that
-    include `bool`, like `bool | int` or `typing.Optional[bool]`, in addition to
-    plain `bool` annotations.
-- [`non-pep604-annotation-union`] (`UP007`) has now been split into two rules.
-    `UP007` now applies only to `typing.Union`, while
-    [`non-pep604-annotation-optional`] (`UP045`) checks for use of
-    `typing.Optional`. `UP045` has also been stabilized in this release, but you
-    may need to update existing `include`, `ignore`, or `noqa` settings to
-    accommodate this change.
+- [`assert-raises-exception`](https://docs.astral.sh/ruff/rules/assert-raises-exception) (`B017`)
+    now checks for direct calls to `unittest.TestCase.assert_raises` and `pytest.raises` instead of
+    only the context manager forms.
+- [`missing-trailing-comma`](https://docs.astral.sh/ruff/rules/missing-trailing-comma) (`COM812`)
+    and [`prohibited-trailing-comma`](https://docs.astral.sh/ruff/rules/prohibited-trailing-comma)
+    (`COM819`) now check for trailing commas in PEP 695 type parameter lists.
+- [`raw-string-in-exception`](https://docs.astral.sh/ruff/rules/raw-string-in-exception) (`EM101`)
+    now also checks for byte strings in exception messages.
+- [`invalid-mock-access`](https://docs.astral.sh/ruff/rules/invalid-mock-access) (`PGH005`) now
+    checks for `AsyncMock` methods like `not_awaited` in addition to the synchronous variants.
+- [`useless-import-alias`](https://docs.astral.sh/ruff/rules/useless-import-alias) (`PLC0414`) no
+    longer applies to `__init__.py` files, where it conflicted with one of the suggested fixes for
+    [`unused-import`](https://docs.astral.sh/ruff/rules/unused-import) (`F401`).
+- [`bidirectional-unicode`](https://docs.astral.sh/ruff/rules/bidirectional-unicode) (`PLE2502`) now
+    also checks for U+061C (Arabic Letter Mark).
+- The fix for
+    [`multiple-with-statements`](https://docs.astral.sh/ruff/rules/multiple-with-statements)
+    (`SIM117`) is now marked as always safe.
 
 ### Preview features
 
-- \[`ruff`\] Check for non-context-manager use of `pytest.raises`, `pytest.warns`, and `pytest.deprecated_call` (`RUF061`) ([#17368](https://github.com/astral-sh/ruff/pull/17368))
-- [syntax-errors] Raise unsupported syntax error for template strings prior to Python 3.14 ([#18664](https://github.com/astral-sh/ruff/pull/18664))
+- \[`pyupgrade`\] Enable `UP043` in stub files ([#20027](https://github.com/astral-sh/ruff/pull/20027))
 
 ### Bug fixes
 
-- Add syntax error when conversion flag does not immediately follow exclamation mark ([#18706](https://github.com/astral-sh/ruff/pull/18706))
-- Add trailing space around `readlines` ([#18542](https://github.com/astral-sh/ruff/pull/18542))
-- Fix `\r` and `\r\n` handling in t- and f-string debug texts ([#18673](https://github.com/astral-sh/ruff/pull/18673))
-- Hug closing `}` when f-string expression has a format specifier ([#18704](https://github.com/astral-sh/ruff/pull/18704))
-- \[`flake8-pyi`\] Avoid syntax error in the case of starred and keyword arguments (`PYI059`) ([#18611](https://github.com/astral-sh/ruff/pull/18611))
-- \[`flake8-return`\] Fix `RET504` autofix generating a syntax error ([#18428](https://github.com/astral-sh/ruff/pull/18428))
-- \[`pep8-naming`\] Suppress fix for `N804` and `N805` if the recommended name is already used ([#18472](https://github.com/astral-sh/ruff/pull/18472))
-- \[`pycodestyle`\] Avoid causing a syntax error in expressions spanning multiple lines (`E731`) ([#18479](https://github.com/astral-sh/ruff/pull/18479))
-- \[`pyupgrade`\] Suppress `UP008` if `super` is shadowed ([#18688](https://github.com/astral-sh/ruff/pull/18688))
-- \[`refurb`\] Parenthesize lambda and ternary expressions (`FURB122`, `FURB142`) ([#18592](https://github.com/astral-sh/ruff/pull/18592))
-- \[`ruff`\] Handle extra arguments to `deque` (`RUF037`) ([#18614](https://github.com/astral-sh/ruff/pull/18614))
-- \[`ruff`\] Preserve parentheses around `deque` in fix for `unnecessary-empty-iterable-within-deque-call` (`RUF037`) ([#18598](https://github.com/astral-sh/ruff/pull/18598))
-- \[`ruff`\] Validate arguments before offering a fix (`RUF056`) ([#18631](https://github.com/astral-sh/ruff/pull/18631))
-- \[`ruff`\] Skip fix for `RUF059` if dummy name is already bound ([#18509](https://github.com/astral-sh/ruff/pull/18509))
-- \[`pylint`\] Fix `PLW0128` to check assignment targets in square brackets and after asterisks ([#18665](https://github.com/astral-sh/ruff/pull/18665))
-
-### Rule changes
-
-- Fix false positive on mutations in `return` statements (`B909`) ([#18408](https://github.com/astral-sh/ruff/pull/18408))
-- Treat `ty:` comments as pragma comments ([#18532](https://github.com/astral-sh/ruff/pull/18532))
-- \[`flake8-pyi`\] Apply `custom-typevar-for-self` to string annotations (`PYI019`) ([#18311](https://github.com/astral-sh/ruff/pull/18311))
-- \[`pyupgrade`\] Don't offer a fix for `Optional[None]` (`UP007`, `UP045)` ([#18545](https://github.com/astral-sh/ruff/pull/18545))
-- \[`pyupgrade`\] Fix `super(__class__, self)` detection (`UP008`) ([#18478](https://github.com/astral-sh/ruff/pull/18478))
-- \[`refurb`\] Make the fix for `FURB163` unsafe for `log2`, `log10`, `*args`, and deleted comments ([#18645](https://github.com/astral-sh/ruff/pull/18645))
+- \[`pyupgrade`\] Apply `UP008` only when the `__class__` cell exists ([#19424](https://github.com/astral-sh/ruff/pull/19424))
+- \[`ruff`\] Fix empty f-string detection in `in-empty-collection` (`RUF060`) ([#20249](https://github.com/astral-sh/ruff/pull/20249))
 
 ### Server
 
-- Support cancellation requests ([#18627](https://github.com/astral-sh/ruff/pull/18627))
+- Add support for using uv as an alternative formatter backend ([#19665](https://github.com/astral-sh/ruff/pull/19665))
 
 ### Documentation
 
-- Drop confusing second `*` from glob pattern example for `per-file-target-version` ([#18709](https://github.com/astral-sh/ruff/pull/18709))
-- Update Neovim configuration examples ([#18491](https://github.com/astral-sh/ruff/pull/18491))
-- \[`pylint`\] De-emphasize `__hash__ = Parent.__hash__` (`PLW1641`) ([#18613](https://github.com/astral-sh/ruff/pull/18613))
-- \[`refurb`\] Add a note about float literal handling (`FURB157`) ([#18615](https://github.com/astral-sh/ruff/pull/18615))
+- \[`pep8-naming`\] Fix formatting of `__all__` (`N816`) ([#20301](https://github.com/astral-sh/ruff/pull/20301))
+
+## 0.12.x
+
+See [changelogs/0.12.x](./changelogs/0.12.x.md)
 
 ## 0.11.x
 
@@ -529,12 +158,3 @@ See [changelogs/0.2.x](./changelogs/0.2.x.md)
 ## 0.1.x
 
 See [changelogs/0.1.x](./changelogs/0.1.x.md)
-
-[`boolean-type-hint-positional-argument`]: https://docs.astral.sh/ruff/rules/boolean-type-hint-positional-argument
-[`collection-literal-concatenation`]: https://docs.astral.sh/ruff/rules/collection-literal-concatenation
-[`if-else-block-instead-of-if-exp`]: https://docs.astral.sh/ruff/rules/if-else-block-instead-of-if-exp
-[`non-pep604-annotation-optional`]: https://docs.astral.sh/ruff/rules/non-pep604-annotation-optional
-[`non-pep604-annotation-union`]: https://docs.astral.sh/ruff/rules/non-pep604-annotation-union
-[`readlines-in-for`]: https://docs.astral.sh/ruff/rules/readlines-in-for
-[`subprocess-without-shell-equals-true`]: https://docs.astral.sh/ruff/rules/subprocess-without-shell-equals-true
-[`unused-noqa`]: https://docs.astral.sh/ruff/rules/unused-noqa

Cargo.lock

@@ -257,9 +257,9 @@ checksum = "bef38d45163c2f1dde094a7dfd33ccf595c92905c8f8f4fdc18d06fb1037718a"
 
 [[package]]
 name = "bitflags"
-version = "2.9.3"
+version = "2.9.4"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "34efbcccd345379ca2868b2b2c9d3782e9cc58ba87bc7d79d5b53d9c9ae6f25d"
+checksum = "2261d10cca569e4643e526d8dc2e62e433cc8aba21ab764233731f8d369bf394"
 
 [[package]]
 name = "bitvec"
@@ -295,7 +295,7 @@ source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "234113d19d0d7d613b40e86fb654acf958910802bcceab913a4f9e7cda03b1a4"
 dependencies = [
  "memchr",
- "regex-automata 0.4.10",
+ "regex-automata",
  "serde",
 ]
 
@@ -322,9 +322,9 @@ dependencies = [
 
 [[package]]
 name = "camino"
-version = "1.1.11"
+version = "1.1.12"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "5d07aa9a93b00c76f71bc35d598bed923f6d4f3a9ca5c24b7737ae1a292841c0"
+checksum = "dd0b03af37dad7a14518b7691d81acb0f8222604ad3d1b02f6b4bed5188c0cd5"
 dependencies = [
  "serde",
 ]
@@ -408,9 +408,9 @@ dependencies = [
 
 [[package]]
 name = "clap"
-version = "4.5.45"
+version = "4.5.47"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "1fc0e74a703892159f5ae7d3aac52c8e6c392f5ae5f359c70b5881d60aaac318"
+checksum = "7eac00902d9d136acd712710d71823fb8ac8004ca445a89e73a41d45aa712931"
 dependencies = [
  "clap_builder",
  "clap_derive",
@@ -418,9 +418,9 @@ dependencies = [
 
 [[package]]
 name = "clap_builder"
-version = "4.5.44"
+version = "4.5.47"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "b3e7f4214277f3c7aa526a59dd3fbe306a370daee1f8b7b8c987069cd8e888a8"
+checksum = "2ad9bbf750e73b5884fb8a211a9424a1906c1e156724260fdae972f31d70e1d6"
 dependencies = [
  "anstream",
  "anstyle",
@@ -461,9 +461,9 @@ dependencies = [
 
 [[package]]
 name = "clap_derive"
-version = "4.5.45"
+version = "4.5.47"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "14cb31bb0a7d536caef2639baa7fad459e15c3144efefa6dbd1c84562c4739f6"
+checksum = "bbfd7eae0b0f1a6e63d4b13c9c478de77c2eb546fba158ad50b4203dc24b9f9c"
 dependencies = [
  "heck",
  "proc-macro2",
@@ -603,7 +603,7 @@ source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "117725a109d387c937a1533ce01b450cbde6b88abceea8473c4d7a85853cda3c"
 dependencies = [
  "lazy_static",
- "windows-sys 0.59.0",
+ "windows-sys 0.52.0",
 ]
 
 [[package]]
@@ -612,7 +612,7 @@ version = "3.0.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "fde0e0ec90c9dfb3b4b1a0891a7dcd0e2bffde2f7efed5fe7c9bb00e5bfb915e"
 dependencies = [
- "windows-sys 0.59.0",
+ "windows-sys 0.52.0",
 ]
 
 [[package]]
@@ -955,7 +955,7 @@ dependencies = [
  "libc",
  "option-ext",
  "redox_users",
- "windows-sys 0.59.0",
+ "windows-sys 0.60.2",
 ]
 
 [[package]]
@@ -1035,7 +1035,7 @@ source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "778e2ac28f6c47af28e4907f13ffd1e1ddbd400980a9abd7c8df189bf578a5ad"
 dependencies = [
  "libc",
- "windows-sys 0.59.0",
+ "windows-sys 0.52.0",
 ]
 
 [[package]]
@@ -1231,8 +1231,8 @@ dependencies = [
  "aho-corasick",
  "bstr",
  "log",
- "regex-automata 0.4.10",
- "regex-syntax 0.8.5",
+ "regex-automata",
+ "regex-syntax",
 ]
 
 [[package]]
@@ -1241,7 +1241,7 @@ version = "0.9.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "0bf760ebf69878d9fd8f110c89703d90ce35095324d1f1edcb595c63945ee757"
 dependencies = [
- "bitflags 2.9.3",
+ "bitflags 2.9.4",
  "ignore",
  "walkdir",
 ]
@@ -1459,7 +1459,7 @@ dependencies = [
  "globset",
  "log",
  "memchr",
- "regex-automata 0.4.10",
+ "regex-automata",
  "same-file",
  "walkdir",
  "winapi-util",
@@ -1521,7 +1521,7 @@ version = "0.11.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "f37dccff2791ab604f9babef0ba14fbe0be30bd368dc541e2b08d07c8aa908f3"
 dependencies = [
- "bitflags 2.9.3",
+ "bitflags 2.9.4",
  "inotify-sys",
  "libc",
 ]
@@ -1537,9 +1537,9 @@ dependencies = [
 
 [[package]]
 name = "insta"
-version = "1.43.1"
+version = "1.43.2"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "154934ea70c58054b556dd430b99a98c2a7ff5309ac9891597e339b5c28f4371"
+checksum = "46fdb647ebde000f43b5b53f773c30cf9b0cb4300453208713fa38b2c70935a0"
 dependencies = [
  "console 0.15.11",
  "globset",
@@ -1617,7 +1617,7 @@ checksum = "e04d7f318608d35d4b61ddd75cbdaee86b023ebe2bd5a66ee0915f0bf93095a9"
 dependencies = [
  "hermit-abi",
  "libc",
- "windows-sys 0.59.0",
+ "windows-sys 0.52.0",
 ]
 
 [[package]]
@@ -1681,7 +1681,7 @@ dependencies = [
  "portable-atomic",
  "portable-atomic-util",
  "serde",
- "windows-sys 0.59.0",
+ "windows-sys 0.52.0",
 ]
 
 [[package]]
@@ -1728,9 +1728,9 @@ checksum = "a037eddb7d28de1d0fc42411f501b53b75838d313908078d6698d064f3029b24"
 
 [[package]]
 name = "js-sys"
-version = "0.3.77"
+version = "0.3.78"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "1cfaf33c695fc6e08064efbc1f72ec937429614f25eef83af942d0e227c3a28f"
+checksum = "0c0b063578492ceec17683ef2f8c5e89121fbd0b172cbc280635ab7567db2738"
 dependencies = [
  "once_cell",
  "wasm-bindgen",
@@ -1770,9 +1770,9 @@ checksum = "6a82ae493e598baaea5209805c49bbf2ea7de956d50d7da0da1164f9c6d28543"
 
 [[package]]
 name = "libcst"
-version = "1.8.2"
+version = "1.8.4"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "ae28ddc5b90c3e3146a21d051ca095cbc8d932ad8714cf65ddf71a9abb35684c"
+checksum = "052ef5d9fc958a51aeebdf3713573b36c6fd6eed0bf0e60e204d2c0f8cf19b9f"
 dependencies = [
  "annotate-snippets",
  "libcst_derive",
@@ -1785,9 +1785,9 @@ dependencies = [
 
 [[package]]
 name = "libcst_derive"
-version = "1.8.2"
+version = "1.8.4"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "dc2de5c2f62bcf8a4f7290b1854388b262c4b68f1db1a3ee3ef6d4c1319b00a3"
+checksum = "a91a751afee92cbdd59d4bc6754c7672712eec2d30a308f23de4e3287b2929cb"
 dependencies = [
  "quote",
  "syn",
@@ -1795,9 +1795,9 @@ dependencies = [
 
 [[package]]
 name = "libmimalloc-sys"
-version = "0.1.43"
+version = "0.1.44"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "bf88cd67e9de251c1781dbe2f641a1a3ad66eaae831b8a2c38fbdc5ddae16d4d"
+checksum = "667f4fec20f29dfc6bc7357c582d91796c169ad7e2fce709468aefeb2c099870"
 dependencies = [
  "cc",
  "libc",
@@ -1809,7 +1809,7 @@ version = "0.1.9"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "391290121bad3d37fbddad76d8f5d1c1c314cfc646d143d7e07a3086ddff0ce3"
 dependencies = [
- "bitflags 2.9.3",
+ "bitflags 2.9.4",
  "libc",
  "redox_syscall",
 ]
@@ -1850,9 +1850,9 @@ dependencies = [
 
 [[package]]
 name = "log"
-version = "0.4.27"
+version = "0.4.28"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "13dc2df351e3202783a1fe0d44375f7295ffb4049267b0f3018346dc122a1d94"
+checksum = "34080505efa8e45a4b816c349525ebe327ceaa8559756f0356cba97ef3bf7432"
 
 [[package]]
 name = "lsp-server"
@@ -1913,11 +1913,11 @@ dependencies = [
 
 [[package]]
 name = "matchers"
-version = "0.1.0"
+version = "0.2.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "8263075bb86c5a1b1427b5ae862e8889656f126e9f77c484496e8b47cf5c5558"
+checksum = "d1525a2a28c7f4fa0fc98bb91ae755d1e2d1505079e05539e35bc876b5d65ae9"
 dependencies = [
- "regex-automata 0.1.10",
+ "regex-automata",
 ]
 
 [[package]]
@@ -1949,9 +1949,9 @@ dependencies = [
 
 [[package]]
 name = "mimalloc"
-version = "0.1.47"
+version = "0.1.48"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "b1791cbe101e95af5764f06f20f6760521f7158f69dbf9d6baf941ee1bf6bc40"
+checksum = "e1ee66a4b64c74f4ef288bcbb9192ad9c3feaad75193129ac8509af543894fd8"
 dependencies = [
  "libmimalloc-sys",
 ]
@@ -2014,7 +2014,7 @@ version = "0.29.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "71e2746dc3a24dd78b3cfcb7be93368c6de9963d30f43a6a73998a9cf4b17b46"
 dependencies = [
- "bitflags 2.9.3",
+ "bitflags 2.9.4",
  "cfg-if",
  "cfg_aliases",
  "libc",
@@ -2026,7 +2026,7 @@ version = "0.30.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "74523f3a35e05aba87a1d978330aef40f67b0304ac79c1c00b294c9830543db6"
 dependencies = [
- "bitflags 2.9.3",
+ "bitflags 2.9.4",
  "cfg-if",
  "cfg_aliases",
  "libc",
@@ -2054,7 +2054,7 @@ version = "8.2.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "4d3d07927151ff8575b7087f245456e549fea62edf0ec4e565a5ee50c8402bc3"
 dependencies = [
- "bitflags 2.9.3",
+ "bitflags 2.9.4",
  "fsevent-sys",
  "inotify",
  "kqueue",
@@ -2074,12 +2074,11 @@ checksum = "5e0826a989adedc2a244799e823aece04662b66609d96af8dff7ac6df9a8925d"
 
 [[package]]
 name = "nu-ansi-term"
-version = "0.46.0"
+version = "0.50.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "77a8165726e8236064dbb45459242600304b42a5ea24ee2948e18e023bf7ba84"
+checksum = "d4a28e057d01f97e61255210fcff094d74ed0466038633e95017f5beb68e4399"
 dependencies = [
- "overload",
- "winapi",
+ "windows-sys 0.52.0",
 ]
 
 [[package]]
@@ -2154,12 +2153,6 @@ dependencies = [
  "memchr",
 ]
 
-[[package]]
-name = "overload"
-version = "0.1.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "b15813163c1d831bf4a13c3610c05c0d03b39feb07f7e09fa234dac9b15aaf39"
-
 [[package]]
 name = "parking_lot"
 version = "0.12.4"
@@ -2666,7 +2659,7 @@ version = "0.5.17"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "5407465600fb0548f1442edf71dd20683c6ed326200ace4b1ef0763521bb3b77"
 dependencies = [
- "bitflags 2.9.3",
+ "bitflags 2.9.4",
 ]
 
 [[package]]
@@ -2688,17 +2681,8 @@ checksum = "23d7fd106d8c02486a8d64e778353d1cffe08ce79ac2e82f540c86d0facf6912"
 dependencies = [
  "aho-corasick",
  "memchr",
- "regex-automata 0.4.10",
- "regex-syntax 0.8.5",
-]
-
-[[package]]
-name = "regex-automata"
-version = "0.1.10"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "6c230d73fb8d8c1b9c0b3135c5142a8acee3a0558fb8db5cf1cb65f8d7862132"
-dependencies = [
- "regex-syntax 0.6.29",
+ "regex-automata",
+ "regex-syntax",
 ]
 
 [[package]]
@@ -2709,7 +2693,7 @@ checksum = "6b9458fa0bfeeac22b5ca447c63aaf45f28439a709ccd244698632f9aa6394d6"
 dependencies = [
  "aho-corasick",
  "memchr",
- "regex-syntax 0.8.5",
+ "regex-syntax",
 ]
 
 [[package]]
@@ -2718,12 +2702,6 @@ version = "0.1.6"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "53a49587ad06b26609c52e423de037e7f57f20d53535d66e08c695f347df952a"
 
-[[package]]
-name = "regex-syntax"
-version = "0.6.29"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "f162c6dd7b008981e4d40210aca20b4bd0f9b60ca9271061b07f78537722f2e1"
-
 [[package]]
 name = "regex-syntax"
 version = "0.8.5"
@@ -2743,13 +2721,13 @@ dependencies = [
 
 [[package]]
 name = "ruff"
-version = "0.12.10"
+version = "0.13.0"
 dependencies = [
  "anyhow",
  "argfile",
  "assert_fs",
  "bincode 2.0.1",
- "bitflags 2.9.3",
+ "bitflags 2.9.4",
  "cachedir",
  "clap",
  "clap_complete_command",
@@ -2870,6 +2848,7 @@ dependencies = [
  "insta",
  "matchit",
  "path-slash",
+ "pathdiff",
  "quick-junit",
  "ruff_annotate_snippets",
  "ruff_cache",
@@ -2998,11 +2977,11 @@ dependencies = [
 
 [[package]]
 name = "ruff_linter"
-version = "0.12.10"
+version = "0.13.0"
 dependencies = [
  "aho-corasick",
  "anyhow",
- "bitflags 2.9.3",
+ "bitflags 2.9.4",
  "clap",
  "colored 3.0.0",
  "fern",
@@ -3020,7 +2999,6 @@ dependencies = [
  "memchr",
  "natord",
  "path-absolutize",
- "pathdiff",
  "pep440_rs",
  "pyproject-toml",
  "regex",
@@ -3108,7 +3086,7 @@ name = "ruff_python_ast"
 version = "0.0.0"
 dependencies = [
  "aho-corasick",
- "bitflags 2.9.3",
+ "bitflags 2.9.4",
  "compact_str",
  "get-size2",
  "is-macro",
@@ -3196,7 +3174,7 @@ dependencies = [
 name = "ruff_python_literal"
 version = "0.0.0"
 dependencies = [
- "bitflags 2.9.3",
+ "bitflags 2.9.4",
  "itertools 0.14.0",
  "ruff_python_ast",
  "unic-ucd-category",
@@ -3207,7 +3185,7 @@ name = "ruff_python_parser"
 version = "0.0.0"
 dependencies = [
  "anyhow",
- "bitflags 2.9.3",
+ "bitflags 2.9.4",
  "bstr",
  "compact_str",
  "get-size2",
@@ -3232,7 +3210,7 @@ dependencies = [
 name = "ruff_python_semantic"
 version = "0.0.0"
 dependencies = [
- "bitflags 2.9.3",
+ "bitflags 2.9.4",
  "insta",
  "is-macro",
  "ruff_cache",
@@ -3253,7 +3231,7 @@ dependencies = [
 name = "ruff_python_stdlib"
 version = "0.0.0"
 dependencies = [
- "bitflags 2.9.3",
+ "bitflags 2.9.4",
  "unicode-ident",
 ]
 
@@ -3337,7 +3315,7 @@ dependencies = [
 
 [[package]]
 name = "ruff_wasm"
-version = "0.12.10"
+version = "0.13.0"
 dependencies = [
  "console_error_panic_hook",
  "console_log",
@@ -3430,11 +3408,11 @@ version = "1.0.8"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "11181fbabf243db407ef8df94a6ce0b2f9a733bd8be4ad02b4eda9602296cac8"
 dependencies = [
- "bitflags 2.9.3",
+ "bitflags 2.9.4",
  "errno",
  "libc",
  "linux-raw-sys",
- "windows-sys 0.59.0",
+ "windows-sys 0.52.0",
 ]
 
 [[package]]
@@ -3827,7 +3805,7 @@ dependencies = [
  "getrandom 0.3.3",
  "once_cell",
  "rustix",
- "windows-sys 0.59.0",
+ "windows-sys 0.52.0",
 ]
 
 [[package]]
@@ -4161,15 +4139,15 @@ dependencies = [
 
 [[package]]
 name = "tracing-subscriber"
-version = "0.3.19"
+version = "0.3.20"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "e8189decb5ac0fa7bc8b96b7cb9b2701d60d48805aca84a238004d665fcc4008"
+checksum = "2054a14f5307d601f88daf0553e1cbf472acc4f2c51afab632431cdcd72124d5"
 dependencies = [
  "chrono",
  "matchers",
  "nu-ansi-term",
  "once_cell",
- "regex",
+ "regex-automata",
  "sharded-slab",
  "smallvec",
  "thread_local",
@@ -4240,7 +4218,8 @@ dependencies = [
 name = "ty_ide"
 version = "0.0.0"
 dependencies = [
- "bitflags 2.9.3",
+ "bitflags 2.9.4",
+ "camino",
  "get-size2",
  "insta",
  "itertools 0.14.0",
@@ -4278,7 +4257,7 @@ dependencies = [
  "pep440_rs",
  "rayon",
  "regex",
- "regex-automata 0.4.10",
+ "regex-automata",
  "ruff_cache",
  "ruff_db",
  "ruff_macros",
@@ -4304,7 +4283,7 @@ name = "ty_python_semantic"
 version = "0.0.0"
 dependencies = [
  "anyhow",
- "bitflags 2.9.3",
+ "bitflags 2.9.4",
  "bitvec",
  "camino",
  "colored 3.0.0",
@@ -4357,7 +4336,7 @@ name = "ty_server"
 version = "0.0.0"
 dependencies = [
  "anyhow",
- "bitflags 2.9.3",
+ "bitflags 2.9.4",
  "crossbeam",
  "dunce",
  "insta",
@@ -4400,7 +4379,7 @@ name = "ty_test"
 version = "0.0.0"
 dependencies = [
  "anyhow",
- "bitflags 2.9.3",
+ "bitflags 2.9.4",
  "camino",
  "colored 3.0.0",
  "insta",
@@ -4759,21 +4738,22 @@ dependencies = [
 
 [[package]]
 name = "wasm-bindgen"
-version = "0.2.100"
+version = "0.2.101"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "1edc8929d7499fc4e8f0be2262a241556cfc54a0bea223790e71446f2aab1ef5"
+checksum = "7e14915cadd45b529bb8d1f343c4ed0ac1de926144b746e2710f9cd05df6603b"
 dependencies = [
  "cfg-if",
  "once_cell",
  "rustversion",
  "wasm-bindgen-macro",
+ "wasm-bindgen-shared",
 ]
 
 [[package]]
 name = "wasm-bindgen-backend"
-version = "0.2.100"
+version = "0.2.101"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "2f0a0651a5c2bc21487bde11ee802ccaf4c51935d0d3d42a6101f98161700bc6"
+checksum = "e28d1ba982ca7923fd01448d5c30c6864d0a14109560296a162f80f305fb93bb"
 dependencies = [
  "bumpalo",
  "log",
@@ -4785,9 +4765,9 @@ dependencies = [
 
 [[package]]
 name = "wasm-bindgen-futures"
-version = "0.4.50"
+version = "0.4.51"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "555d470ec0bc3bb57890405e5d4322cc9ea83cebb085523ced7be4144dac1e61"
+checksum = "0ca85039a9b469b38336411d6d6ced91f3fc87109a2a27b0c197663f5144dffe"
 dependencies = [
  "cfg-if",
  "js-sys",
@@ -4798,9 +4778,9 @@ dependencies = [
 
 [[package]]
 name = "wasm-bindgen-macro"
-version = "0.2.100"
+version = "0.2.101"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "7fe63fc6d09ed3792bd0897b314f53de8e16568c2b3f7982f468c0bf9bd0b407"
+checksum = "7c3d463ae3eff775b0c45df9da45d68837702ac35af998361e2c84e7c5ec1b0d"
 dependencies = [
  "quote",
  "wasm-bindgen-macro-support",
@@ -4808,9 +4788,9 @@ dependencies = [
 
 [[package]]
 name = "wasm-bindgen-macro-support"
-version = "0.2.100"
+version = "0.2.101"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "8ae87ea40c9f689fc23f209965b6fb8a99ad69aeeb0231408be24920604395de"
+checksum = "7bb4ce89b08211f923caf51d527662b75bdc9c9c7aab40f86dcb9fb85ac552aa"
 dependencies = [
  "proc-macro2",
  "quote",
@@ -4821,18 +4801,18 @@ dependencies = [
 
 [[package]]
 name = "wasm-bindgen-shared"
-version = "0.2.100"
+version = "0.2.101"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "1a05d73b933a847d6cccdda8f838a22ff101ad9bf93e33684f39c1f5f0eece3d"
+checksum = "f143854a3b13752c6950862c906306adb27c7e839f7414cec8fea35beab624c1"
 dependencies = [
  "unicode-ident",
 ]
 
 [[package]]
 name = "wasm-bindgen-test"
-version = "0.3.50"
+version = "0.3.51"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "66c8d5e33ca3b6d9fa3b4676d774c5778031d27a578c2b007f905acf816152c3"
+checksum = "80cc7f8a4114fdaa0c58383caf973fc126cf004eba25c9dc639bccd3880d55ad"
 dependencies = [
  "js-sys",
  "minicov",
@@ -4843,9 +4823,9 @@ dependencies = [
 
 [[package]]
 name = "wasm-bindgen-test-macro"
-version = "0.3.50"
+version = "0.3.51"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "17d5042cc5fa009658f9a7333ef24291b1291a25b6382dd68862a7f3b969f69b"
+checksum = "c5ada2ab788d46d4bda04c9d567702a79c8ced14f51f221646a16ed39d0e6a5d"
 dependencies = [
  "proc-macro2",
  "quote",
@@ -4854,9 +4834,9 @@ dependencies = [
 
 [[package]]
 name = "web-sys"
-version = "0.3.77"
+version = "0.3.78"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "33b6dd2ef9186f1f2072e409e99cd22a975331a6b3591b12c764e0e55c60d5d2"
+checksum = "77e4b637749ff0d92b8fad63aa1f7cff3cbe125fd49c175cd6345e7272638b12"
 dependencies = [
  "js-sys",
  "wasm-bindgen",
@@ -4892,37 +4872,15 @@ dependencies = [
  "glob",
 ]
 
-[[package]]
-name = "winapi"
-version = "0.3.9"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "5c839a674fcd7a98952e593242ea400abe93992746761e38641405d28b00f419"
-dependencies = [
- "winapi-i686-pc-windows-gnu",
- "winapi-x86_64-pc-windows-gnu",
-]
-
-[[package]]
-name = "winapi-i686-pc-windows-gnu"
-version = "0.4.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "ac3b87c63620426dd9b991e5ce0329eff545bccbbb34f3be09ff6fb6ab51b7b6"
-
 [[package]]
 name = "winapi-util"
 version = "0.1.9"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "cf221c93e13a30d793f7645a0e7762c55d169dbb0a49671918a2319d289b10bb"
 dependencies = [
- "windows-sys 0.59.0",
+ "windows-sys 0.52.0",
 ]
 
-[[package]]
-name = "winapi-x86_64-pc-windows-gnu"
-version = "0.4.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "712e227841d057c1ee1cd2fb22fa7e5a5461ae8e48fa2ca79ec42cfc1931183f"
-
 [[package]]
 name = "windows-core"
 version = "0.61.2"
@@ -4982,6 +4940,15 @@ dependencies = [
  "windows-link",
 ]
 
+[[package]]
+name = "windows-sys"
+version = "0.52.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "282be5f36a8ce781fad8c8ae18fa3f9beff57ec1b52cb3de0789201425d9a33d"
+dependencies = [
+ "windows-targets 0.52.6",
+]
+
 [[package]]
 name = "windows-sys"
 version = "0.59.0"
@@ -5150,7 +5117,7 @@ version = "0.39.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "6f42320e61fe2cfd34354ecb597f86f413484a798ba44a8ca1165c58d42da6c1"
 dependencies = [
- "bitflags 2.9.3",
+ "bitflags 2.9.4",
 ]
 
 [[package]]

Cargo.toml

@@ -115,7 +115,7 @@ jiff = { version = "0.2.0" }
 js-sys = { version = "0.3.69" }
 jod-thread = { version = "1.0.0" }
 libc = { version = "0.2.153" }
-libcst = { version = "1.1.0", default-features = false }
+libcst = { version = "1.8.4", default-features = false }
 log = { version = "0.4.17" }
 lsp-server = { version = "0.7.6" }
 lsp-types = { git = "https://github.com/astral-sh/lsp-types.git", rev = "3512a9f", features = [
@@ -251,6 +251,14 @@ rest_pat_in_fully_bound_structs = "warn"
 redundant_clone = "warn"
 debug_assert_with_mut_call = "warn"
 unused_peekable = "warn"
+# This lint sometimes flags code whose `if` and `else`
+# bodies could be flipped when a `!` operator is removed.
+# While perhaps sometimes a good idea, it is also often
+# not a good idea due to other factors impacting
+# readability. For example, if flipping the bodies results
+# in the `if` being an order of magnitude bigger than the
+# `else`, then some might consider that harder to read.
+if_not_else = "allow"
 
 # Diagnostics are not actionable: Enable once https://github.com/rust-lang/rust-clippy/issues/13774 is resolved.
 large_stack_arrays = "allow"

README.md

@@ -148,8 +148,8 @@ curl -LsSf https://astral.sh/ruff/install.sh | sh
 powershell -c "irm https://astral.sh/ruff/install.ps1 | iex"
 
 # For a specific version.
-curl -LsSf https://astral.sh/ruff/0.12.10/install.sh | sh
-powershell -c "irm https://astral.sh/ruff/0.12.10/install.ps1 | iex"
+curl -LsSf https://astral.sh/ruff/0.13.0/install.sh | sh
+powershell -c "irm https://astral.sh/ruff/0.13.0/install.ps1 | iex"
 ```
 
 You can also install Ruff via [Homebrew](https://formulae.brew.sh/formula/ruff), [Conda](https://anaconda.org/conda-forge/ruff),
@@ -182,7 +182,7 @@ Ruff can also be used as a [pre-commit](https://pre-commit.com/) hook via [`ruff
 ```yaml
 - repo: https://github.com/astral-sh/ruff-pre-commit
   # Ruff version.
-  rev: v0.12.10
+  rev: v0.13.0
   hooks:
     # Run the linter.
     - id: ruff-check

changelogs/0.12.x.md

@@ -0,0 +1,551 @@
+# Changelog 0.12.x
+
+## 0.12.0
+
+Check out the [blog post](https://astral.sh/blog/ruff-v0.12.0) for a migration
+guide and overview of the changes!
+
+### Breaking changes
+
+- **Detection of more syntax errors**
+
+    Ruff now detects version-related syntax errors, such as the use of the `match`
+    statement on Python versions before 3.10, and syntax errors emitted by
+    CPython's compiler, such as irrefutable `match` patterns before the final
+    `case` arm.
+
+- **New default Python version handling for syntax errors**
+
+    Ruff will default to the *latest* supported Python version (3.13) when
+    checking for the version-related syntax errors mentioned above to prevent
+    false positives in projects without a Python version configured. The default
+    in all other cases, like applying lint rules, is unchanged and remains at the
+    minimum supported Python version (3.9).
+
+- **Updated f-string formatting**
+
+    Ruff now formats multi-line f-strings with format specifiers to avoid adding a
+    line break after the format specifier. This addresses a change to the Python
+    grammar in version 3.13.4 that made such a line break a syntax error.
+
+- **`rust-toolchain.toml` is no longer included in source distributions**
+
+    The `rust-toolchain.toml` is used to specify a higher Rust version than Ruff's
+    minimum supported Rust version (MSRV) for development and building release
+    artifacts. However, when present in source distributions, it would also cause
+    downstream package maintainers to pull in the same Rust toolchain, even if
+    their available toolchain was MSRV-compatible.
+
+### Removed Rules
+
+The following rules have been removed:
+
+- [`suspicious-xmle-tree-usage`](https://docs.astral.sh/ruff/rules/suspicious-xmle-tree-usage/)
+    (`S320`)
+
+### Deprecated Rules
+
+The following rules have been deprecated:
+
+- [`pandas-df-variable-name`](https://docs.astral.sh/ruff/rules/pandas-df-variable-name/)
+
+### Stabilization
+
+The following rules have been stabilized and are no longer in preview:
+
+- [`for-loop-writes`](https://docs.astral.sh/ruff/rules/for-loop-writes) (`FURB122`)
+- [`check-and-remove-from-set`](https://docs.astral.sh/ruff/rules/check-and-remove-from-set) (`FURB132`)
+- [`verbose-decimal-constructor`](https://docs.astral.sh/ruff/rules/verbose-decimal-constructor) (`FURB157`)
+- [`fromisoformat-replace-z`](https://docs.astral.sh/ruff/rules/fromisoformat-replace-z) (`FURB162`)
+- [`int-on-sliced-str`](https://docs.astral.sh/ruff/rules/int-on-sliced-str) (`FURB166`)
+- [`exc-info-outside-except-handler`](https://docs.astral.sh/ruff/rules/exc-info-outside-except-handler) (`LOG014`)
+- [`import-outside-top-level`](https://docs.astral.sh/ruff/rules/import-outside-top-level) (`PLC0415`)
+- [`unnecessary-dict-index-lookup`](https://docs.astral.sh/ruff/rules/unnecessary-dict-index-lookup) (`PLR1733`)
+- [`nan-comparison`](https://docs.astral.sh/ruff/rules/nan-comparison) (`PLW0177`)
+- [`eq-without-hash`](https://docs.astral.sh/ruff/rules/eq-without-hash) (`PLW1641`)
+- [`pytest-parameter-with-default-argument`](https://docs.astral.sh/ruff/rules/pytest-parameter-with-default-argument) (`PT028`)
+- [`pytest-warns-too-broad`](https://docs.astral.sh/ruff/rules/pytest-warns-too-broad) (`PT030`)
+- [`pytest-warns-with-multiple-statements`](https://docs.astral.sh/ruff/rules/pytest-warns-with-multiple-statements) (`PT031`)
+- [`invalid-formatter-suppression-comment`](https://docs.astral.sh/ruff/rules/invalid-formatter-suppression-comment) (`RUF028`)
+- [`dataclass-enum`](https://docs.astral.sh/ruff/rules/dataclass-enum) (`RUF049`)
+- [`class-with-mixed-type-vars`](https://docs.astral.sh/ruff/rules/class-with-mixed-type-vars) (`RUF053`)
+- [`unnecessary-round`](https://docs.astral.sh/ruff/rules/unnecessary-round) (`RUF057`)
+- [`starmap-zip`](https://docs.astral.sh/ruff/rules/starmap-zip) (`RUF058`)
+- [`non-pep604-annotation-optional`] (`UP045`)
+- [`non-pep695-generic-class`](https://docs.astral.sh/ruff/rules/non-pep695-generic-class) (`UP046`)
+- [`non-pep695-generic-function`](https://docs.astral.sh/ruff/rules/non-pep695-generic-function) (`UP047`)
+- [`private-type-parameter`](https://docs.astral.sh/ruff/rules/private-type-parameter) (`UP049`)
+
+The following behaviors have been stabilized:
+
+- [`collection-literal-concatenation`] (`RUF005`) now recognizes slices, in
+    addition to list literals and variables.
+- The fix for [`readlines-in-for`] (`FURB129`) is now marked as always safe.
+- [`if-else-block-instead-of-if-exp`] (`SIM108`) will now further simplify
+    expressions to use `or` instead of an `if` expression, where possible.
+- [`unused-noqa`] (`RUF100`) now checks for file-level `noqa` comments as well
+    as inline comments.
+- [`subprocess-without-shell-equals-true`] (`S603`) now accepts literal strings,
+    as well as lists and tuples of literal strings, as trusted input.
+- [`boolean-type-hint-positional-argument`] (`FBT001`) now applies to types that
+    include `bool`, like `bool | int` or `typing.Optional[bool]`, in addition to
+    plain `bool` annotations.
+- [`non-pep604-annotation-union`] (`UP007`) has now been split into two rules.
+    `UP007` now applies only to `typing.Union`, while
+    [`non-pep604-annotation-optional`] (`UP045`) checks for use of
+    `typing.Optional`. `UP045` has also been stabilized in this release, but you
+    may need to update existing `include`, `ignore`, or `noqa` settings to
+    accommodate this change.
+
+### Preview features
+
+- \[`ruff`\] Check for non-context-manager use of `pytest.raises`, `pytest.warns`, and `pytest.deprecated_call` (`RUF061`) ([#17368](https://github.com/astral-sh/ruff/pull/17368))
+- [syntax-errors] Raise unsupported syntax error for template strings prior to Python 3.14 ([#18664](https://github.com/astral-sh/ruff/pull/18664))
+
+### Bug fixes
+
+- Add syntax error when conversion flag does not immediately follow exclamation mark ([#18706](https://github.com/astral-sh/ruff/pull/18706))
+- Add trailing space around `readlines` ([#18542](https://github.com/astral-sh/ruff/pull/18542))
+- Fix `\r` and `\r\n` handling in t- and f-string debug texts ([#18673](https://github.com/astral-sh/ruff/pull/18673))
+- Hug closing `}` when f-string expression has a format specifier ([#18704](https://github.com/astral-sh/ruff/pull/18704))
+- \[`flake8-pyi`\] Avoid syntax error in the case of starred and keyword arguments (`PYI059`) ([#18611](https://github.com/astral-sh/ruff/pull/18611))
+- \[`flake8-return`\] Fix `RET504` autofix generating a syntax error ([#18428](https://github.com/astral-sh/ruff/pull/18428))
+- \[`pep8-naming`\] Suppress fix for `N804` and `N805` if the recommended name is already used ([#18472](https://github.com/astral-sh/ruff/pull/18472))
+- \[`pycodestyle`\] Avoid causing a syntax error in expressions spanning multiple lines (`E731`) ([#18479](https://github.com/astral-sh/ruff/pull/18479))
+- \[`pyupgrade`\] Suppress `UP008` if `super` is shadowed ([#18688](https://github.com/astral-sh/ruff/pull/18688))
+- \[`refurb`\] Parenthesize lambda and ternary expressions (`FURB122`, `FURB142`) ([#18592](https://github.com/astral-sh/ruff/pull/18592))
+- \[`ruff`\] Handle extra arguments to `deque` (`RUF037`) ([#18614](https://github.com/astral-sh/ruff/pull/18614))
+- \[`ruff`\] Preserve parentheses around `deque` in fix for `unnecessary-empty-iterable-within-deque-call` (`RUF037`) ([#18598](https://github.com/astral-sh/ruff/pull/18598))
+- \[`ruff`\] Validate arguments before offering a fix (`RUF056`) ([#18631](https://github.com/astral-sh/ruff/pull/18631))
+- \[`ruff`\] Skip fix for `RUF059` if dummy name is already bound ([#18509](https://github.com/astral-sh/ruff/pull/18509))
+- \[`pylint`\] Fix `PLW0128` to check assignment targets in square brackets and after asterisks ([#18665](https://github.com/astral-sh/ruff/pull/18665))
+
+### Rule changes
+
+- Fix false positive on mutations in `return` statements (`B909`) ([#18408](https://github.com/astral-sh/ruff/pull/18408))
+- Treat `ty:` comments as pragma comments ([#18532](https://github.com/astral-sh/ruff/pull/18532))
+- \[`flake8-pyi`\] Apply `custom-typevar-for-self` to string annotations (`PYI019`) ([#18311](https://github.com/astral-sh/ruff/pull/18311))
+- \[`pyupgrade`\] Don't offer a fix for `Optional[None]` (`UP007`, `UP045)` ([#18545](https://github.com/astral-sh/ruff/pull/18545))
+- \[`pyupgrade`\] Fix `super(__class__, self)` detection (`UP008`) ([#18478](https://github.com/astral-sh/ruff/pull/18478))
+- \[`refurb`\] Make the fix for `FURB163` unsafe for `log2`, `log10`, `*args`, and deleted comments ([#18645](https://github.com/astral-sh/ruff/pull/18645))
+
+### Server
+
+- Support cancellation requests ([#18627](https://github.com/astral-sh/ruff/pull/18627))
+
+### Documentation
+
+- Drop confusing second `*` from glob pattern example for `per-file-target-version` ([#18709](https://github.com/astral-sh/ruff/pull/18709))
+- Update Neovim configuration examples ([#18491](https://github.com/astral-sh/ruff/pull/18491))
+- \[`pylint`\] De-emphasize `__hash__ = Parent.__hash__` (`PLW1641`) ([#18613](https://github.com/astral-sh/ruff/pull/18613))
+- \[`refurb`\] Add a note about float literal handling (`FURB157`) ([#18615](https://github.com/astral-sh/ruff/pull/18615))
+
+## 0.12.1
+
+### Preview features
+
+- \[`flake8-errmsg`\] Extend `EM101` to support byte strings ([#18867](https://github.com/astral-sh/ruff/pull/18867))
+- \[`flake8-use-pathlib`\] Add autofix for `PTH202` ([#18763](https://github.com/astral-sh/ruff/pull/18763))
+- \[`pygrep-hooks`\] Add `AsyncMock` methods to `invalid-mock-access` (`PGH005`) ([#18547](https://github.com/astral-sh/ruff/pull/18547))
+- \[`pylint`\] Ignore `__init__.py` files in (`PLC0414`) ([#18400](https://github.com/astral-sh/ruff/pull/18400))
+- \[`ruff`\] Trigger `RUF037` for empty string and byte strings ([#18862](https://github.com/astral-sh/ruff/pull/18862))
+- [formatter] Fix missing blank lines before decorated classes in `.pyi` files ([#18888](https://github.com/astral-sh/ruff/pull/18888))
+
+### Bug fixes
+
+- Avoid generating diagnostics with per-file ignores ([#18801](https://github.com/astral-sh/ruff/pull/18801))
+- Handle parenthesized arguments in `remove_argument` ([#18805](https://github.com/astral-sh/ruff/pull/18805))
+- \[`flake8-logging`\] Avoid false positive for `exc_info=True` outside `logger.exception` (`LOG014`) ([#18737](https://github.com/astral-sh/ruff/pull/18737))
+- \[`flake8-pytest-style`\] Enforce `pytest` import for decorators ([#18779](https://github.com/astral-sh/ruff/pull/18779))
+- \[`flake8-pytest-style`\] Mark autofix for `PT001` and `PT023` as unsafe if there's comments in the decorator ([#18792](https://github.com/astral-sh/ruff/pull/18792))
+- \[`flake8-pytest-style`\] `PT001`/`PT023` fix makes syntax error on parenthesized decorator ([#18782](https://github.com/astral-sh/ruff/pull/18782))
+- \[`flake8-raise`\] Make fix unsafe if it deletes comments (`RSE102`) ([#18788](https://github.com/astral-sh/ruff/pull/18788))
+- \[`flake8-simplify`\] Fix `SIM911` autofix creating a syntax error ([#18793](https://github.com/astral-sh/ruff/pull/18793))
+- \[`flake8-simplify`\] Fix false negatives for shadowed bindings (`SIM910`, `SIM911`) ([#18794](https://github.com/astral-sh/ruff/pull/18794))
+- \[`flake8-simplify`\] Preserve original behavior for `except ()` and bare `except` (`SIM105`) ([#18213](https://github.com/astral-sh/ruff/pull/18213))
+- \[`flake8-pyi`\] Fix `PYI041`'s fix causing `TypeError` with `None | None | ...` ([#18637](https://github.com/astral-sh/ruff/pull/18637))
+- \[`perflint`\] Fix `PERF101` autofix creating a syntax error and mark autofix as unsafe if there are comments in the `list` call expr ([#18803](https://github.com/astral-sh/ruff/pull/18803))
+- \[`perflint`\] Fix false negative in `PERF401` ([#18866](https://github.com/astral-sh/ruff/pull/18866))
+- \[`pylint`\] Avoid flattening nested `min`/`max` when outer call has single argument (`PLW3301`) ([#16885](https://github.com/astral-sh/ruff/pull/16885))
+- \[`pylint`\] Fix `PLC2801` autofix creating a syntax error ([#18857](https://github.com/astral-sh/ruff/pull/18857))
+- \[`pylint`\] Mark `PLE0241` autofix as unsafe if there's comments in the base classes ([#18832](https://github.com/astral-sh/ruff/pull/18832))
+- \[`pylint`\] Suppress `PLE2510`/`PLE2512`/`PLE2513`/`PLE2514`/`PLE2515` autofix if the text contains an odd number of backslashes ([#18856](https://github.com/astral-sh/ruff/pull/18856))
+- \[`refurb`\] Detect more exotic float literals in `FURB164` ([#18925](https://github.com/astral-sh/ruff/pull/18925))
+- \[`refurb`\] Fix `FURB163` autofix creating a syntax error for `yield` expressions ([#18756](https://github.com/astral-sh/ruff/pull/18756))
+- \[`refurb`\] Mark `FURB129` autofix as unsafe if there's comments in the `readlines` call ([#18858](https://github.com/astral-sh/ruff/pull/18858))
+- \[`ruff`\] Fix false positives and negatives in `RUF010` ([#18690](https://github.com/astral-sh/ruff/pull/18690))
+- Fix casing of `analyze.direction` variant names ([#18892](https://github.com/astral-sh/ruff/pull/18892))
+
+### Rule changes
+
+- Fix f-string interpolation escaping in generated fixes ([#18882](https://github.com/astral-sh/ruff/pull/18882))
+- \[`flake8-return`\] Mark `RET501` fix unsafe if comments are inside ([#18780](https://github.com/astral-sh/ruff/pull/18780))
+- \[`flake8-async`\] Fix detection for large integer sleep durations in `ASYNC116` rule ([#18767](https://github.com/astral-sh/ruff/pull/18767))
+- \[`flake8-async`\] Mark autofix for `ASYNC115` as unsafe if the call expression contains comments ([#18753](https://github.com/astral-sh/ruff/pull/18753))
+- \[`flake8-bugbear`\] Mark autofix for `B004` as unsafe if the `hasattr` call expr contains comments ([#18755](https://github.com/astral-sh/ruff/pull/18755))
+- \[`flake8-comprehension`\] Mark autofix for `C420` as unsafe if there's comments inside the dict comprehension ([#18768](https://github.com/astral-sh/ruff/pull/18768))
+- \[`flake8-comprehensions`\] Handle template strings for comprehension fixes ([#18710](https://github.com/astral-sh/ruff/pull/18710))
+- \[`flake8-future-annotations`\] Add autofix (`FA100`) ([#18903](https://github.com/astral-sh/ruff/pull/18903))
+- \[`pyflakes`\] Mark `F504`/`F522`/`F523` autofix as unsafe if there's a call with side effect ([#18839](https://github.com/astral-sh/ruff/pull/18839))
+- \[`pylint`\] Allow fix with comments and document performance implications (`PLW3301`) ([#18936](https://github.com/astral-sh/ruff/pull/18936))
+- \[`pylint`\] Detect more exotic `NaN` literals in `PLW0177` ([#18630](https://github.com/astral-sh/ruff/pull/18630))
+- \[`pylint`\] Fix `PLC1802` autofix creating a syntax error and mark autofix as unsafe if there's comments in the `len` call ([#18836](https://github.com/astral-sh/ruff/pull/18836))
+- \[`pyupgrade`\] Extend version detection to include `sys.version_info.major` (`UP036`) ([#18633](https://github.com/astral-sh/ruff/pull/18633))
+- \[`ruff`\] Add lint rule `RUF064` for calling `chmod` with non-octal integers ([#18541](https://github.com/astral-sh/ruff/pull/18541))
+- \[`ruff`\] Added `cls.__dict__.get('__annotations__')` check (`RUF063`) ([#18233](https://github.com/astral-sh/ruff/pull/18233))
+- \[`ruff`\] Frozen `dataclass` default should be valid (`RUF009`) ([#18735](https://github.com/astral-sh/ruff/pull/18735))
+
+### Server
+
+- Consider virtual path for various server actions ([#18910](https://github.com/astral-sh/ruff/pull/18910))
+
+### Documentation
+
+- Add fix safety sections ([#18940](https://github.com/astral-sh/ruff/pull/18940),[#18841](https://github.com/astral-sh/ruff/pull/18841),[#18802](https://github.com/astral-sh/ruff/pull/18802),[#18837](https://github.com/astral-sh/ruff/pull/18837),[#18800](https://github.com/astral-sh/ruff/pull/18800),[#18415](https://github.com/astral-sh/ruff/pull/18415),[#18853](https://github.com/astral-sh/ruff/pull/18853),[#18842](https://github.com/astral-sh/ruff/pull/18842))
+- Use updated pre-commit id ([#18718](https://github.com/astral-sh/ruff/pull/18718))
+- \[`perflint`\] Small docs improvement to `PERF401` ([#18786](https://github.com/astral-sh/ruff/pull/18786))
+- \[`pyupgrade`\]: Use `super()`, not `__super__` in error messages (`UP008`) ([#18743](https://github.com/astral-sh/ruff/pull/18743))
+- \[`flake8-pie`\] Small docs fix to `PIE794` ([#18829](https://github.com/astral-sh/ruff/pull/18829))
+- \[`flake8-pyi`\] Correct `collections-named-tuple` example to use PascalCase assignment ([#16884](https://github.com/astral-sh/ruff/pull/16884))
+- \[`flake8-pie`\] Add note on type checking benefits to `unnecessary-dict-kwargs` (`PIE804`) ([#18666](https://github.com/astral-sh/ruff/pull/18666))
+- \[`pycodestyle`\] Clarify PEP 8 relationship to `whitespace-around-operator` rules ([#18870](https://github.com/astral-sh/ruff/pull/18870))
+
+### Other changes
+
+- Disallow newlines in format specifiers of single quoted f- or t-strings ([#18708](https://github.com/astral-sh/ruff/pull/18708))
+- \[`flake8-logging`\] Add fix safety section to `LOG002` ([#18840](https://github.com/astral-sh/ruff/pull/18840))
+- \[`pyupgrade`\] Add fix safety section to `UP010` ([#18838](https://github.com/astral-sh/ruff/pull/18838))
+
+## 0.12.2
+
+### Preview features
+
+- \[`flake8-pyi`\] Expand `Optional[A]` to `A | None` (`PYI016`) ([#18572](https://github.com/astral-sh/ruff/pull/18572))
+- \[`pyupgrade`\] Mark `UP008` fix safe if no comments are in range ([#18683](https://github.com/astral-sh/ruff/pull/18683))
+
+### Bug fixes
+
+- \[`flake8-comprehensions`\] Fix `C420` to prepend whitespace when needed ([#18616](https://github.com/astral-sh/ruff/pull/18616))
+- \[`perflint`\] Fix `PERF403` panic on attribute or subscription loop variable ([#19042](https://github.com/astral-sh/ruff/pull/19042))
+- \[`pydocstyle`\] Fix `D413` infinite loop for parenthesized docstring ([#18930](https://github.com/astral-sh/ruff/pull/18930))
+- \[`pylint`\] Fix `PLW0108` autofix introducing a syntax error when the lambda's body contains an assignment expression ([#18678](https://github.com/astral-sh/ruff/pull/18678))
+- \[`refurb`\] Fix false positive on empty tuples (`FURB168`) ([#19058](https://github.com/astral-sh/ruff/pull/19058))
+- \[`ruff`\] Allow more `field` calls from `attrs` (`RUF009`) ([#19021](https://github.com/astral-sh/ruff/pull/19021))
+- \[`ruff`\] Fix syntax error introduced for an empty string followed by a u-prefixed string (`UP025`) ([#18899](https://github.com/astral-sh/ruff/pull/18899))
+
+### Rule changes
+
+- \[`flake8-executable`\] Allow `uvx` in shebang line (`EXE003`) ([#18967](https://github.com/astral-sh/ruff/pull/18967))
+- \[`pandas`\] Avoid flagging `PD002` if `pandas` is not imported ([#18963](https://github.com/astral-sh/ruff/pull/18963))
+- \[`pyupgrade`\] Avoid PEP-604 unions with `typing.NamedTuple` (`UP007`, `UP045`) ([#18682](https://github.com/astral-sh/ruff/pull/18682))
+
+### Documentation
+
+- Document link between `import-outside-top-level (PLC0415)` and `lint.flake8-tidy-imports.banned-module-level-imports` ([#18733](https://github.com/astral-sh/ruff/pull/18733))
+- Fix description of the `format.skip-magic-trailing-comma` example ([#19095](https://github.com/astral-sh/ruff/pull/19095))
+- \[`airflow`\] Make `AIR302` example error out-of-the-box ([#18988](https://github.com/astral-sh/ruff/pull/18988))
+- \[`airflow`\] Make `AIR312` example error out-of-the-box ([#18989](https://github.com/astral-sh/ruff/pull/18989))
+- \[`flake8-annotations`\] Make `ANN401` example error out-of-the-box ([#18974](https://github.com/astral-sh/ruff/pull/18974))
+- \[`flake8-async`\] Make `ASYNC100` example error out-of-the-box ([#18993](https://github.com/astral-sh/ruff/pull/18993))
+- \[`flake8-async`\] Make `ASYNC105` example error out-of-the-box ([#19002](https://github.com/astral-sh/ruff/pull/19002))
+- \[`flake8-async`\] Make `ASYNC110` example error out-of-the-box ([#18975](https://github.com/astral-sh/ruff/pull/18975))
+- \[`flake8-async`\] Make `ASYNC210` example error out-of-the-box ([#18977](https://github.com/astral-sh/ruff/pull/18977))
+- \[`flake8-async`\] Make `ASYNC220`, `ASYNC221`, and `ASYNC222` examples error out-of-the-box ([#18978](https://github.com/astral-sh/ruff/pull/18978))
+- \[`flake8-async`\] Make `ASYNC251` example error out-of-the-box ([#18990](https://github.com/astral-sh/ruff/pull/18990))
+- \[`flake8-bandit`\] Make `S201` example error out-of-the-box ([#19017](https://github.com/astral-sh/ruff/pull/19017))
+- \[`flake8-bandit`\] Make `S604` and `S609` examples error out-of-the-box ([#19049](https://github.com/astral-sh/ruff/pull/19049))
+- \[`flake8-bugbear`\] Make `B028` example error out-of-the-box ([#19054](https://github.com/astral-sh/ruff/pull/19054))
+- \[`flake8-bugbear`\] Make `B911` example error out-of-the-box ([#19051](https://github.com/astral-sh/ruff/pull/19051))
+- \[`flake8-datetimez`\] Make `DTZ011` example error out-of-the-box ([#19055](https://github.com/astral-sh/ruff/pull/19055))
+- \[`flake8-datetimez`\] Make `DTZ901` example error out-of-the-box ([#19056](https://github.com/astral-sh/ruff/pull/19056))
+- \[`flake8-pyi`\] Make `PYI032` example error out-of-the-box ([#19061](https://github.com/astral-sh/ruff/pull/19061))
+- \[`flake8-pyi`\] Make example error out-of-the-box (`PYI014`, `PYI015`) ([#19097](https://github.com/astral-sh/ruff/pull/19097))
+- \[`flake8-pyi`\] Make example error out-of-the-box (`PYI042`) ([#19101](https://github.com/astral-sh/ruff/pull/19101))
+- \[`flake8-pyi`\] Make example error out-of-the-box (`PYI059`) ([#19080](https://github.com/astral-sh/ruff/pull/19080))
+- \[`flake8-pyi`\] Make example error out-of-the-box (`PYI062`) ([#19079](https://github.com/astral-sh/ruff/pull/19079))
+- \[`flake8-pytest-style`\] Make example error out-of-the-box (`PT023`) ([#19104](https://github.com/astral-sh/ruff/pull/19104))
+- \[`flake8-pytest-style`\] Make example error out-of-the-box (`PT030`) ([#19105](https://github.com/astral-sh/ruff/pull/19105))
+- \[`flake8-quotes`\] Make example error out-of-the-box (`Q003`) ([#19106](https://github.com/astral-sh/ruff/pull/19106))
+- \[`flake8-simplify`\] Make example error out-of-the-box (`SIM110`) ([#19113](https://github.com/astral-sh/ruff/pull/19113))
+- \[`flake8-simplify`\] Make example error out-of-the-box (`SIM113`) ([#19109](https://github.com/astral-sh/ruff/pull/19109))
+- \[`flake8-simplify`\] Make example error out-of-the-box (`SIM401`) ([#19110](https://github.com/astral-sh/ruff/pull/19110))
+- \[`pyflakes`\] Fix backslash in docs (`F621`) ([#19098](https://github.com/astral-sh/ruff/pull/19098))
+- \[`pylint`\] Fix `PLC0415` example ([#18970](https://github.com/astral-sh/ruff/pull/18970))
+
+## 0.12.3
+
+### Preview features
+
+- \[`flake8-bugbear`\] Support non-context-manager calls in `B017` ([#19063](https://github.com/astral-sh/ruff/pull/19063))
+- \[`flake8-use-pathlib`\] Add autofixes for `PTH100`, `PTH106`, `PTH107`, `PTH108`, `PTH110`, `PTH111`, `PTH112`, `PTH113`, `PTH114`, `PTH115`, `PTH117`, `PTH119`, `PTH120` ([#19213](https://github.com/astral-sh/ruff/pull/19213))
+- \[`flake8-use-pathlib`\] Add autofixes for `PTH203`, `PTH204`, `PTH205` ([#18922](https://github.com/astral-sh/ruff/pull/18922))
+
+### Bug fixes
+
+- \[`flake8-return`\] Fix false-positive for variables used inside nested functions in `RET504` ([#18433](https://github.com/astral-sh/ruff/pull/18433))
+- Treat form feed as valid whitespace before a line continuation ([#19220](https://github.com/astral-sh/ruff/pull/19220))
+- \[`flake8-type-checking`\] Fix syntax error introduced by fix (`TC008`) ([#19150](https://github.com/astral-sh/ruff/pull/19150))
+- \[`pyupgrade`\] Keyword arguments in `super` should suppress the `UP008` fix ([#19131](https://github.com/astral-sh/ruff/pull/19131))
+
+### Documentation
+
+- \[`flake8-pyi`\] Make example error out-of-the-box (`PYI007`, `PYI008`) ([#19103](https://github.com/astral-sh/ruff/pull/19103))
+- \[`flake8-simplify`\] Make example error out-of-the-box (`SIM116`) ([#19111](https://github.com/astral-sh/ruff/pull/19111))
+- \[`flake8-type-checking`\] Make example error out-of-the-box (`TC001`) ([#19151](https://github.com/astral-sh/ruff/pull/19151))
+- \[`flake8-use-pathlib`\] Make example error out-of-the-box (`PTH210`) ([#19189](https://github.com/astral-sh/ruff/pull/19189))
+- \[`pycodestyle`\] Make example error out-of-the-box (`E272`) ([#19191](https://github.com/astral-sh/ruff/pull/19191))
+- \[`pycodestyle`\] Make example not raise unnecessary `SyntaxError` (`E114`) ([#19190](https://github.com/astral-sh/ruff/pull/19190))
+- \[`pydoclint`\] Make example error out-of-the-box (`DOC501`) ([#19218](https://github.com/astral-sh/ruff/pull/19218))
+- \[`pylint`, `pyupgrade`\] Fix syntax errors in examples (`PLW1501`, `UP028`) ([#19127](https://github.com/astral-sh/ruff/pull/19127))
+- \[`pylint`\] Update `missing-maxsplit-arg` docs and error to suggest proper usage (`PLC0207`) ([#18949](https://github.com/astral-sh/ruff/pull/18949))
+- \[`flake8-bandit`\] Make example error out-of-the-box (`S412`) ([#19241](https://github.com/astral-sh/ruff/pull/19241))
+
+## 0.12.4
+
+### Preview features
+
+- \[`flake8-type-checking`, `pyupgrade`, `ruff`\] Add `from __future__ import annotations` when it would allow new fixes (`TC001`, `TC002`, `TC003`, `UP037`, `RUF013`) ([#19100](https://github.com/astral-sh/ruff/pull/19100))
+- \[`flake8-use-pathlib`\] Add autofix for `PTH109` ([#19245](https://github.com/astral-sh/ruff/pull/19245))
+- \[`pylint`\] Detect indirect `pathlib.Path` usages for `unspecified-encoding` (`PLW1514`) ([#19304](https://github.com/astral-sh/ruff/pull/19304))
+
+### Bug fixes
+
+- \[`flake8-bugbear`\] Fix `B017` false negatives for keyword exception arguments ([#19217](https://github.com/astral-sh/ruff/pull/19217))
+- \[`flake8-use-pathlib`\] Fix false negative on direct `Path()` instantiation (`PTH210`) ([#19388](https://github.com/astral-sh/ruff/pull/19388))
+- \[`flake8-django`\] Fix `DJ008` false positive for abstract models with type-annotated `abstract` field ([#19221](https://github.com/astral-sh/ruff/pull/19221))
+- \[`isort`\] Fix `I002` import insertion after docstring with multiple string statements ([#19222](https://github.com/astral-sh/ruff/pull/19222))
+- \[`isort`\] Treat form feed as valid whitespace before a semicolon ([#19343](https://github.com/astral-sh/ruff/pull/19343))
+- \[`pydoclint`\] Fix `SyntaxError` from fixes with line continuations (`D201`, `D202`) ([#19246](https://github.com/astral-sh/ruff/pull/19246))
+- \[`refurb`\] `FURB164` fix should validate arguments and should usually be marked unsafe ([#19136](https://github.com/astral-sh/ruff/pull/19136))
+
+### Rule changes
+
+- \[`flake8-use-pathlib`\] Skip single dots for `invalid-pathlib-with-suffix` (`PTH210`) on versions >= 3.14 ([#19331](https://github.com/astral-sh/ruff/pull/19331))
+- \[`pep8_naming`\] Avoid false positives on standard library functions with uppercase names (`N802`) ([#18907](https://github.com/astral-sh/ruff/pull/18907))
+- \[`pycodestyle`\] Handle brace escapes for t-strings in logical lines ([#19358](https://github.com/astral-sh/ruff/pull/19358))
+- \[`pylint`\] Extend invalid string character rules to include t-strings ([#19355](https://github.com/astral-sh/ruff/pull/19355))
+- \[`ruff`\] Allow `strict` kwarg when checking for `starmap-zip` (`RUF058`) in Python 3.14+ ([#19333](https://github.com/astral-sh/ruff/pull/19333))
+
+### Documentation
+
+- \[`flake8-type-checking`\] Make `TC010` docs example more realistic ([#19356](https://github.com/astral-sh/ruff/pull/19356))
+- Make more documentation examples error out-of-the-box ([#19288](https://github.com/astral-sh/ruff/pull/19288),[#19272](https://github.com/astral-sh/ruff/pull/19272),[#19291](https://github.com/astral-sh/ruff/pull/19291),[#19296](https://github.com/astral-sh/ruff/pull/19296),[#19292](https://github.com/astral-sh/ruff/pull/19292),[#19295](https://github.com/astral-sh/ruff/pull/19295),[#19297](https://github.com/astral-sh/ruff/pull/19297),[#19309](https://github.com/astral-sh/ruff/pull/19309))
+
+## 0.12.5
+
+### Preview features
+
+- \[`flake8-use-pathlib`\] Add autofix for `PTH101`, `PTH104`, `PTH105`, `PTH121` ([#19404](https://github.com/astral-sh/ruff/pull/19404))
+- \[`ruff`\] Support byte strings (`RUF055`) ([#18926](https://github.com/astral-sh/ruff/pull/18926))
+
+### Bug fixes
+
+- Fix `unreachable` panic in parser ([#19183](https://github.com/astral-sh/ruff/pull/19183))
+- \[`flake8-pyi`\] Skip fix if all `Union` members are `None` (`PYI016`) ([#19416](https://github.com/astral-sh/ruff/pull/19416))
+- \[`perflint`\] Parenthesize generator expressions (`PERF401`) ([#19325](https://github.com/astral-sh/ruff/pull/19325))
+- \[`pylint`\] Handle empty comments after line continuation (`PLR2044`) ([#19405](https://github.com/astral-sh/ruff/pull/19405))
+
+### Rule changes
+
+- \[`pep8-naming`\] Fix `N802` false positives for `CGIHTTPRequestHandler` and `SimpleHTTPRequestHandler` ([#19432](https://github.com/astral-sh/ruff/pull/19432))
+
+## 0.12.6
+
+### Preview features
+
+- \[`flake8-commas`\] Add support for trailing comma checks in type parameter lists (`COM812`, `COM819`) ([#19390](https://github.com/astral-sh/ruff/pull/19390))
+- \[`pylint`\] Implement auto-fix for `missing-maxsplit-arg` (`PLC0207`) ([#19387](https://github.com/astral-sh/ruff/pull/19387))
+- \[`ruff`\] Offer fixes for `RUF039` in more cases ([#19065](https://github.com/astral-sh/ruff/pull/19065))
+
+### Bug fixes
+
+- Support `.pyi` files in ruff analyze graph ([#19611](https://github.com/astral-sh/ruff/pull/19611))
+- \[`flake8-pyi`\] Preserve inline comment in ellipsis removal (`PYI013`) ([#19399](https://github.com/astral-sh/ruff/pull/19399))
+- \[`perflint`\] Ignore rule if target is `global` or `nonlocal` (`PERF401`) ([#19539](https://github.com/astral-sh/ruff/pull/19539))
+- \[`pyupgrade`\] Fix `UP030` to avoid modifying double curly braces in format strings ([#19378](https://github.com/astral-sh/ruff/pull/19378))
+- \[`refurb`\] Ignore decorated functions for `FURB118` ([#19339](https://github.com/astral-sh/ruff/pull/19339))
+- \[`refurb`\] Mark `int` and `bool` cases for `Decimal.from_float` as safe fixes (`FURB164`) ([#19468](https://github.com/astral-sh/ruff/pull/19468))
+- \[`ruff`\] Fix `RUF033` for named default expressions ([#19115](https://github.com/astral-sh/ruff/pull/19115))
+
+### Rule changes
+
+- \[`flake8-blind-except`\] Change `BLE001` to permit `logging.critical(..., exc_info=True)` ([#19520](https://github.com/astral-sh/ruff/pull/19520))
+
+### Performance
+
+- Add support for specifying minimum dots in detected string imports ([#19538](https://github.com/astral-sh/ruff/pull/19538))
+
+## 0.12.7
+
+This is a follow-up release to 0.12.6. Because of an issue in the package metadata, 0.12.6 failed to publish fully to PyPI and has been yanked. Similarly, there is no GitHub release or Git tag for 0.12.6. The contents of the 0.12.7 release are identical to 0.12.6, except for the updated metadata.
+
+## 0.12.8
+
+### Preview features
+
+- \[`flake8-use-pathlib`\] Expand `PTH201` to check all `PurePath` subclasses ([#19440](https://github.com/astral-sh/ruff/pull/19440))
+
+### Bug fixes
+
+- \[`flake8-blind-except`\] Change `BLE001` to correctly parse exception tuples ([#19747](https://github.com/astral-sh/ruff/pull/19747))
+- \[`flake8-errmsg`\] Exclude `typing.cast` from `EM101` ([#19656](https://github.com/astral-sh/ruff/pull/19656))
+- \[`flake8-simplify`\] Fix raw string handling in `SIM905` for embedded quotes ([#19591](https://github.com/astral-sh/ruff/pull/19591))
+- \[`flake8-import-conventions`\] Avoid false positives for NFKC-normalized `__debug__` import aliases in `ICN001` ([#19411](https://github.com/astral-sh/ruff/pull/19411))
+- \[`isort`\] Fix syntax error after docstring ending with backslash (`I002`) ([#19505](https://github.com/astral-sh/ruff/pull/19505))
+- \[`pylint`\] Mark `PLC0207` fixes as unsafe when `*args` unpacking is present ([#19679](https://github.com/astral-sh/ruff/pull/19679))
+- \[`pyupgrade`\] Prevent infinite loop with `I002` (`UP010`, `UP035`) ([#19413](https://github.com/astral-sh/ruff/pull/19413))
+- \[`ruff`\] Parenthesize generator expressions in f-strings (`RUF010`) ([#19434](https://github.com/astral-sh/ruff/pull/19434))
+
+### Rule changes
+
+- \[`eradicate`\] Don't flag `pyrefly` pragmas as unused code (`ERA001`) ([#19731](https://github.com/astral-sh/ruff/pull/19731))
+
+### Documentation
+
+- Replace "associative" with "commutative" in docs for `RUF036` ([#19706](https://github.com/astral-sh/ruff/pull/19706))
+- Fix copy and line separator colors in dark mode ([#19630](https://github.com/astral-sh/ruff/pull/19630))
+- Fix link to `typing` documentation ([#19648](https://github.com/astral-sh/ruff/pull/19648))
+- \[`refurb`\] Make more examples error out-of-the-box ([#19695](https://github.com/astral-sh/ruff/pull/19695),[#19673](https://github.com/astral-sh/ruff/pull/19673),[#19672](https://github.com/astral-sh/ruff/pull/19672))
+
+### Other changes
+
+- Include column numbers in GitLab output format ([#19708](https://github.com/astral-sh/ruff/pull/19708))
+- Always expand tabs to four spaces in diagnostics ([#19618](https://github.com/astral-sh/ruff/pull/19618))
+- Update pre-commit's `ruff` id ([#19654](https://github.com/astral-sh/ruff/pull/19654))
+
+## 0.12.9
+
+### Preview features
+
+- \[`airflow`\] Add check for `airflow.secrets.cache.SecretCache` (`AIR301`) ([#17707](https://github.com/astral-sh/ruff/pull/17707))
+- \[`ruff`\] Offer a safe fix for multi-digit zeros (`RUF064`) ([#19847](https://github.com/astral-sh/ruff/pull/19847))
+
+### Bug fixes
+
+- \[`flake8-blind-except`\] Fix `BLE001` false-positive on `raise ... from None` ([#19755](https://github.com/astral-sh/ruff/pull/19755))
+- \[`flake8-comprehensions`\] Fix false positive for `C420` with attribute, subscript, or slice assignment targets ([#19513](https://github.com/astral-sh/ruff/pull/19513))
+- \[`flake8-simplify`\] Fix handling of U+001C..U+001F whitespace (`SIM905`) ([#19849](https://github.com/astral-sh/ruff/pull/19849))
+
+### Rule changes
+
+- \[`pylint`\] Use lowercase hex characters to match the formatter (`PLE2513`) ([#19808](https://github.com/astral-sh/ruff/pull/19808))
+
+### Documentation
+
+- Fix `lint.future-annotations` link ([#19876](https://github.com/astral-sh/ruff/pull/19876))
+
+### Other changes
+
+- Build `riscv64` binaries for release ([#19819](https://github.com/astral-sh/ruff/pull/19819))
+
+- Add rule code to error description in GitLab output ([#19896](https://github.com/astral-sh/ruff/pull/19896))
+
+- Improve rendering of the `full` output format ([#19415](https://github.com/astral-sh/ruff/pull/19415))
+
+    Below is an example diff for [`F401`](https://docs.astral.sh/ruff/rules/unused-import/):
+
+    ```diff
+    -unused.py:8:19: F401 [*] `pathlib` imported but unused
+    +F401 [*] `pathlib` imported but unused
+    +  --> unused.py:8:19
+        |
+      7 | # Unused, _not_ marked as required (due to the alias).
+      8 | import pathlib as non_alias
+    -   |                   ^^^^^^^^^ F401
+    +   |                   ^^^^^^^^^
+      9 |
+     10 | # Unused, marked as required.
+        |
+    -   = help: Remove unused import: `pathlib`
+    +help: Remove unused import: `pathlib`
+    ```
+
+    For now, the primary difference is the movement of the filename, line number, and column information to a second line in the header. This new representation will allow us to make further additions to Ruff's diagnostics, such as adding sub-diagnostics and multiple annotations to the same snippet.
+
+## 0.12.10
+
+### Preview features
+
+- \[`flake8-simplify`\] Implement fix for `maxsplit` without separator (`SIM905`) ([#19851](https://github.com/astral-sh/ruff/pull/19851))
+- \[`flake8-use-pathlib`\] Add fixes for `PTH102` and `PTH103` ([#19514](https://github.com/astral-sh/ruff/pull/19514))
+
+### Bug fixes
+
+- \[`isort`\] Handle multiple continuation lines after module docstring (`I002`) ([#19818](https://github.com/astral-sh/ruff/pull/19818))
+- \[`pyupgrade`\] Avoid reporting `__future__` features as unnecessary when they are used (`UP010`) ([#19769](https://github.com/astral-sh/ruff/pull/19769))
+- \[`pyupgrade`\] Handle nested `Optional`s (`UP045`) ([#19770](https://github.com/astral-sh/ruff/pull/19770))
+
+### Rule changes
+
+- \[`pycodestyle`\] Make `E731` fix unsafe instead of display-only for class assignments ([#19700](https://github.com/astral-sh/ruff/pull/19700))
+- \[`pyflakes`\] Add secondary annotation showing previous definition (`F811`) ([#19900](https://github.com/astral-sh/ruff/pull/19900))
+
+### Documentation
+
+- Fix description of global config file discovery strategy ([#19188](https://github.com/astral-sh/ruff/pull/19188))
+- Update outdated links to <https://typing.python.org/en/latest/source/stubs.html> ([#19992](https://github.com/astral-sh/ruff/pull/19992))
+- \[`flake8-annotations`\] Remove unused import in example (`ANN401`) ([#20000](https://github.com/astral-sh/ruff/pull/20000))
+
+## 0.12.11
+
+### Preview features
+
+- \[`airflow`\] Extend `AIR311` and `AIR312` rules ([#20082](https://github.com/astral-sh/ruff/pull/20082))
+- \[`airflow`\] Replace wrong path `airflow.io.storage` with `airflow.io.store` (`AIR311`) ([#20081](https://github.com/astral-sh/ruff/pull/20081))
+- \[`flake8-async`\] Implement `blocking-http-call-httpx-in-async-function` (`ASYNC212`) ([#20091](https://github.com/astral-sh/ruff/pull/20091))
+- \[`flake8-logging-format`\] Add auto-fix for f-string logging calls (`G004`) ([#19303](https://github.com/astral-sh/ruff/pull/19303))
+- \[`flake8-use-pathlib`\] Add autofix for `PTH211` ([#20009](https://github.com/astral-sh/ruff/pull/20009))
+- \[`flake8-use-pathlib`\] Make `PTH100` fix unsafe because it can change behavior ([#20100](https://github.com/astral-sh/ruff/pull/20100))
+
+### Bug fixes
+
+- \[`pyflakes`, `pylint`\] Fix false positives caused by `__class__` cell handling (`F841`, `PLE0117`) ([#20048](https://github.com/astral-sh/ruff/pull/20048))
+- \[`pyflakes`\] Fix `allowed-unused-imports` matching for top-level modules (`F401`) ([#20115](https://github.com/astral-sh/ruff/pull/20115))
+- \[`ruff`\] Fix false positive for t-strings in `default-factory-kwarg` (`RUF026`) ([#20032](https://github.com/astral-sh/ruff/pull/20032))
+- \[`ruff`\] Preserve relative whitespace in multi-line expressions (`RUF033`) ([#19647](https://github.com/astral-sh/ruff/pull/19647))
+
+### Rule changes
+
+- \[`ruff`\] Handle empty t-strings in `unnecessary-empty-iterable-within-deque-call` (`RUF037`) ([#20045](https://github.com/astral-sh/ruff/pull/20045))
+
+### Documentation
+
+- Fix incorrect `D413` links in docstrings convention FAQ ([#20089](https://github.com/astral-sh/ruff/pull/20089))
+- \[`flake8-use-pathlib`\] Update links to the table showing the correspondence between `os` and `pathlib` ([#20103](https://github.com/astral-sh/ruff/pull/20103))
+
+## 0.12.12
+
+### Preview features
+
+- Show fixes by default ([#19919](https://github.com/astral-sh/ruff/pull/19919))
+- \[`airflow`\] Convert `DatasetOrTimeSchedule(datasets=...)` to `AssetOrTimeSchedule(assets=...)` (`AIR311`) ([#20202](https://github.com/astral-sh/ruff/pull/20202))
+- \[`airflow`\] Improve the `AIR002` error message ([#20173](https://github.com/astral-sh/ruff/pull/20173))
+- \[`airflow`\] Move `airflow.operators.postgres_operator.Mapping` from `AIR302` to `AIR301` ([#20172](https://github.com/astral-sh/ruff/pull/20172))
+- \[`flake8-async`\] Implement `blocking-input` rule (`ASYNC250`) ([#20122](https://github.com/astral-sh/ruff/pull/20122))
+- \[`flake8-use-pathlib`\] Make `PTH119` and `PTH120` fixes unsafe because they can change behavior ([#20118](https://github.com/astral-sh/ruff/pull/20118))
+- \[`pylint`\] Add U+061C to `PLE2502` ([#20106](https://github.com/astral-sh/ruff/pull/20106))
+- \[`ruff`\] Fix false negative for empty f-strings in `deque` calls (`RUF037`) ([#20109](https://github.com/astral-sh/ruff/pull/20109))
+
+### Bug fixes
+
+- Less confidently mark f-strings as empty when inferring truthiness ([#20152](https://github.com/astral-sh/ruff/pull/20152))
+- \[`fastapi`\] Fix false positive for paths with spaces around parameters (`FAST003`) ([#20077](https://github.com/astral-sh/ruff/pull/20077))
+- \[`flake8-comprehensions`\] Skip `C417` when lambda contains `yield`/`yield from` ([#20201](https://github.com/astral-sh/ruff/pull/20201))
+- \[`perflint`\] Handle tuples in dictionary comprehensions (`PERF403`) ([#19934](https://github.com/astral-sh/ruff/pull/19934))
+
+### Rule changes
+
+- \[`pycodestyle`\] Preserve return type annotation for `ParamSpec` (`E731`) ([#20108](https://github.com/astral-sh/ruff/pull/20108))
+
+### Documentation
+
+- Add fix safety sections to docs ([#17490](https://github.com/astral-sh/ruff/pull/17490),[#17499](https://github.com/astral-sh/ruff/pull/17499))
+
+[`boolean-type-hint-positional-argument`]: https://docs.astral.sh/ruff/rules/boolean-type-hint-positional-argument
+[`collection-literal-concatenation`]: https://docs.astral.sh/ruff/rules/collection-literal-concatenation
+[`if-else-block-instead-of-if-exp`]: https://docs.astral.sh/ruff/rules/if-else-block-instead-of-if-exp
+[`non-pep604-annotation-optional`]: https://docs.astral.sh/ruff/rules/non-pep604-annotation-optional
+[`non-pep604-annotation-union`]: https://docs.astral.sh/ruff/rules/non-pep604-annotation-union
+[`readlines-in-for`]: https://docs.astral.sh/ruff/rules/readlines-in-for
+[`subprocess-without-shell-equals-true`]: https://docs.astral.sh/ruff/rules/subprocess-without-shell-equals-true
+[`unused-noqa`]: https://docs.astral.sh/ruff/rules/unused-noqa

crates/ruff/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "ruff"
-version = "0.12.10"
+version = "0.13.0"
 publish = true
 authors = { workspace = true }
 edition = { workspace = true }

crates/ruff/src/printer.rs

@@ -15,8 +15,7 @@ use ruff_db::diagnostic::{
 use ruff_linter::fs::relativize_path;
 use ruff_linter::logging::LogLevel;
 use ruff_linter::message::{
-    Emitter, EmitterContext, GithubEmitter, GitlabEmitter, GroupedEmitter, SarifEmitter,
-    TextEmitter,
+    Emitter, EmitterContext, GithubEmitter, GroupedEmitter, SarifEmitter, TextEmitter,
 };
 use ruff_linter::notify_user;
 use ruff_linter::settings::flags::{self};
@@ -31,8 +30,6 @@ bitflags! {
         const SHOW_VIOLATIONS = 1 << 0;
         /// Whether to show a summary of the fixed violations when emitting diagnostics.
         const SHOW_FIX_SUMMARY = 1 << 1;
-        /// Whether to show a diff of each fixed violation when emitting diagnostics.
-        const SHOW_FIX_DIFF = 1 << 2;
     }
 }
 
@@ -261,9 +258,9 @@ impl Printer {
             OutputFormat::Concise | OutputFormat::Full => {
                 TextEmitter::default()
                     .with_show_fix_status(show_fix_status(self.fix_mode, fixables.as_ref()))
-                    .with_show_fix_diff(self.flags.intersects(Flags::SHOW_FIX_DIFF))
+                    .with_show_fix_diff(self.format == OutputFormat::Full && preview)
                     .with_show_source(self.format == OutputFormat::Full)
-                    .with_unsafe_fixes(self.unsafe_fixes)
+                    .with_fix_applicability(self.unsafe_fixes.required_applicability())
                     .with_preview(preview)
                     .emit(writer, &diagnostics.inner, &context)?;
 
@@ -296,7 +293,11 @@ impl Printer {
                 GithubEmitter.emit(writer, &diagnostics.inner, &context)?;
             }
             OutputFormat::Gitlab => {
-                GitlabEmitter::default().emit(writer, &diagnostics.inner, &context)?;
+                let config = DisplayDiagnosticConfig::default()
+                    .format(DiagnosticFormat::Gitlab)
+                    .preview(preview);
+                let value = DisplayDiagnostics::new(&context, &config, &diagnostics.inner);
+                write!(writer, "{value}")?;
             }
             OutputFormat::Pylint => {
                 let config = DisplayDiagnosticConfig::default()
@@ -461,7 +462,7 @@ impl Printer {
             TextEmitter::default()
                 .with_show_fix_status(show_fix_status(self.fix_mode, fixables.as_ref()))
                 .with_show_source(preview)
-                .with_unsafe_fixes(self.unsafe_fixes)
+                .with_fix_applicability(self.unsafe_fixes.required_applicability())
                 .emit(writer, &diagnostics.inner, &context)?;
         }
         writer.flush()?;

crates/ruff/tests/integration_test.rs

@@ -1489,6 +1489,8 @@ fn deprecated_direct() {
 
 #[test]
 fn deprecated_multiple_direct() {
+    // Multiple deprecated rules selected by exact code should be included
+    // but a warning should be displayed
     let mut cmd = RuffCheck::default()
         .args(["--select", "RUF920", "--select", "RUF921"])
         .build();
@@ -1516,16 +1518,10 @@ fn deprecated_indirect() {
     // since it is not a "direct" selection
     let mut cmd = RuffCheck::default().args(["--select", "RUF92"]).build();
     assert_cmd_snapshot!(cmd, @r"
-    success: false
-    exit_code: 1
+    success: true
+    exit_code: 0
     ----- stdout -----
-    RUF920 Hey this is a deprecated test rule.
-    --> -:1:1
-
-    RUF921 Hey this is another deprecated test rule.
-    --> -:1:1
-
-    Found 2 errors.
+    All checks passed!
 
     ----- stderr -----
     ");
@@ -2155,16 +2151,10 @@ extend-safe-fixes = ["RUF9"]
     RUF903 Hey this is a stable test rule with a display only fix.
     --> -:1:1
 
-    RUF920 Hey this is a deprecated test rule.
-    --> -:1:1
-
-    RUF921 Hey this is another deprecated test rule.
-    --> -:1:1
-
     RUF950 Hey this is a test rule that was redirected from another.
     --> -:1:1
 
-    Found 7 errors.
+    Found 5 errors.
     [*] 1 fixable with the `--fix` option (1 hidden fix can be enabled with the `--unsafe-fixes` option).
 
     ----- stderr -----

crates/ruff/tests/lint.rs

@@ -5780,28 +5780,6 @@ match 42:  # invalid-syntax
     Ok(())
 }
 
-#[test]
-fn future_annotations_preview_warning() {
-    assert_cmd_snapshot!(
-        Command::new(get_cargo_bin(BIN_NAME))
-            .args(STDIN_BASE_OPTIONS)
-            .args(["--config", "lint.future-annotations = true"])
-            .args(["--select", "F"])
-            .arg("--no-preview")
-            .arg("-")
-            .pass_stdin("1"),
-        @r"
-    success: true
-    exit_code: 0
-    ----- stdout -----
-    All checks passed!
-
-    ----- stderr -----
-    warning: The `lint.future-annotations` setting will have no effect because `preview` is disabled
-    ",
-    );
-}
-
 #[test]
 fn up045_nested_optional_flatten_all() {
     let contents = "\
@@ -5830,3 +5808,33 @@ nested_optional: Optional[Optional[Optional[str]]] = None
     ",
     );
 }
+
+#[test]
+fn show_fixes_in_full_output_with_preview_enabled() {
+    assert_cmd_snapshot!(
+        Command::new(get_cargo_bin(BIN_NAME))
+            .args(["check", "--no-cache", "--output-format", "full"])
+            .args(["--select", "F401"])
+            .arg("--preview")
+            .arg("-")
+            .pass_stdin("import math"),
+        @r"
+    success: false
+    exit_code: 1
+    ----- stdout -----
+    F401 [*] `math` imported but unused
+     --> -:1:8
+      |
+    1 | import math
+      |        ^^^^
+      |
+    help: Remove unused import: `math`
+      - import math
+
+    Found 1 error.
+    [*] 1 fixable with the `--fix` option.
+
+    ----- stderr -----
+    ",
+    );
+}

crates/ruff/tests/snapshots/integration_test__rule_f401.snap

@@ -55,6 +55,10 @@ either a redundant alias or, if already present in the file, an `__all__` entry.
 to remove third-party and standard library imports -- the fix is unsafe because the module's
 interface changes.
 
+See [this FAQ section](https://docs.astral.sh/ruff/faq/#how-does-ruff-determine-which-of-my-imports-are-first-party-third-party-etc)
+for more details on how Ruff
+determines whether an import is first or third-party.
+
 ## Example
 
 ```python
@@ -83,11 +87,6 @@ else:
     print("numpy is not installed")
 ```
 
-## Preview
-When [preview](https://docs.astral.sh/ruff/preview/) is enabled,
-the criterion for determining whether an import is first-party
-is stricter, which could affect the suggested fix. See [this FAQ section](https://docs.astral.sh/ruff/faq/#how-does-ruff-determine-which-of-my-imports-are-first-party-third-party-etc) for more details.
-
 ## Options
 - `lint.ignore-init-module-imports`
 - `lint.pyflakes.allowed-unused-imports`

crates/ruff/tests/snapshots/lint__output_format_gitlab.snap

@@ -20,59 +20,59 @@ exit_code: 1
   {
     "check_name": "F401",
     "description": "F401: `os` imported but unused",
+    "severity": "major",
     "fingerprint": "4dbad37161e65c72",
     "location": {
       "path": "input.py",
       "positions": {
         "begin": {
-          "column": 8,
-          "line": 1
+          "line": 1,
+          "column": 8
         },
         "end": {
-          "column": 10,
-          "line": 1
+          "line": 1,
+          "column": 10
         }
       }
-    },
-    "severity": "major"
+    }
   },
   {
     "check_name": "F821",
     "description": "F821: Undefined name `y`",
+    "severity": "major",
     "fingerprint": "7af59862a085230",
     "location": {
       "path": "input.py",
       "positions": {
         "begin": {
-          "column": 5,
-          "line": 2
+          "line": 2,
+          "column": 5
         },
         "end": {
-          "column": 6,
-          "line": 2
+          "line": 2,
+          "column": 6
         }
       }
-    },
-    "severity": "major"
+    }
   },
   {
     "check_name": "invalid-syntax",
     "description": "invalid-syntax: Cannot use `match` statement on Python 3.9 (syntax was added in Python 3.10)",
+    "severity": "major",
     "fingerprint": "e558cec859bb66e8",
     "location": {
       "path": "input.py",
       "positions": {
         "begin": {
-          "column": 1,
-          "line": 3
+          "line": 3,
+          "column": 1
         },
         "end": {
-          "column": 6,
-          "line": 3
+          "line": 3,
+          "column": 6
         }
       }
-    },
-    "severity": "major"
+    }
   }
 ]
 ----- stderr -----

crates/ruff/tests/snapshots/lint__output_format_sarif.snap

@@ -95,7 +95,7 @@ exit_code: 1
           "rules": [
             {
               "fullDescription": {
-                "text": "## What it does\nChecks for unused imports.\n\n## Why is this bad?\nUnused imports add a performance overhead at runtime, and risk creating\nimport cycles. They also increase the cognitive load of reading the code.\n\nIf an import statement is used to check for the availability or existence\nof a module, consider using `importlib.util.find_spec` instead.\n\nIf an import statement is used to re-export a symbol as part of a module's\npublic interface, consider using a \"redundant\" import alias, which\ninstructs Ruff (and other tools) to respect the re-export, and avoid\nmarking it as unused, as in:\n\n```python\nfrom module import member as member\n```\n\nAlternatively, you can use `__all__` to declare a symbol as part of the module's\ninterface, as in:\n\n```python\n# __init__.py\nimport some_module\n\n__all__ = [\"some_module\"]\n```\n\n## Fix safety\n\nFixes to remove unused imports are safe, except in `__init__.py` files.\n\nApplying fixes to `__init__.py` files is currently in preview. The fix offered depends on the\ntype of the unused import. Ruff will suggest a safe fix to export first-party imports with\neither a redundant alias or, if already present in the file, an `__all__` entry. If multiple\n`__all__` declarations are present, Ruff will not offer a fix. Ruff will suggest an unsafe fix\nto remove third-party and standard library imports -- the fix is unsafe because the module's\ninterface changes.\n\n## Example\n\n```python\nimport numpy as np  # unused import\n\n\ndef area(radius):\n    return 3.14 * radius**2\n```\n\nUse instead:\n\n```python\ndef area(radius):\n    return 3.14 * radius**2\n```\n\nTo check the availability of a module, use `importlib.util.find_spec`:\n\n```python\nfrom importlib.util import find_spec\n\nif find_spec(\"numpy\") is not None:\n    print(\"numpy is installed\")\nelse:\n    print(\"numpy is not installed\")\n```\n\n## Preview\nWhen [preview](https://docs.astral.sh/ruff/preview/) is enabled,\nthe criterion for determining whether an import is first-party\nis stricter, which could affect the suggested fix. See [this FAQ section](https://docs.astral.sh/ruff/faq/#how-does-ruff-determine-which-of-my-imports-are-first-party-third-party-etc) for more details.\n\n## Options\n- `lint.ignore-init-module-imports`\n- `lint.pyflakes.allowed-unused-imports`\n\n## References\n- [Python documentation: `import`](https://docs.python.org/3/reference/simple_stmts.html#the-import-statement)\n- [Python documentation: `importlib.util.find_spec`](https://docs.python.org/3/library/importlib.html#importlib.util.find_spec)\n- [Typing documentation: interface conventions](https://typing.python.org/en/latest/spec/distributing.html#library-interface-public-and-private-symbols)\n"
+                "text": "## What it does\nChecks for unused imports.\n\n## Why is this bad?\nUnused imports add a performance overhead at runtime, and risk creating\nimport cycles. They also increase the cognitive load of reading the code.\n\nIf an import statement is used to check for the availability or existence\nof a module, consider using `importlib.util.find_spec` instead.\n\nIf an import statement is used to re-export a symbol as part of a module's\npublic interface, consider using a \"redundant\" import alias, which\ninstructs Ruff (and other tools) to respect the re-export, and avoid\nmarking it as unused, as in:\n\n```python\nfrom module import member as member\n```\n\nAlternatively, you can use `__all__` to declare a symbol as part of the module's\ninterface, as in:\n\n```python\n# __init__.py\nimport some_module\n\n__all__ = [\"some_module\"]\n```\n\n## Fix safety\n\nFixes to remove unused imports are safe, except in `__init__.py` files.\n\nApplying fixes to `__init__.py` files is currently in preview. The fix offered depends on the\ntype of the unused import. Ruff will suggest a safe fix to export first-party imports with\neither a redundant alias or, if already present in the file, an `__all__` entry. If multiple\n`__all__` declarations are present, Ruff will not offer a fix. Ruff will suggest an unsafe fix\nto remove third-party and standard library imports -- the fix is unsafe because the module's\ninterface changes.\n\nSee [this FAQ section](https://docs.astral.sh/ruff/faq/#how-does-ruff-determine-which-of-my-imports-are-first-party-third-party-etc)\nfor more details on how Ruff\ndetermines whether an import is first or third-party.\n\n## Example\n\n```python\nimport numpy as np  # unused import\n\n\ndef area(radius):\n    return 3.14 * radius**2\n```\n\nUse instead:\n\n```python\ndef area(radius):\n    return 3.14 * radius**2\n```\n\nTo check the availability of a module, use `importlib.util.find_spec`:\n\n```python\nfrom importlib.util import find_spec\n\nif find_spec(\"numpy\") is not None:\n    print(\"numpy is installed\")\nelse:\n    print(\"numpy is not installed\")\n```\n\n## Options\n- `lint.ignore-init-module-imports`\n- `lint.pyflakes.allowed-unused-imports`\n\n## References\n- [Python documentation: `import`](https://docs.python.org/3/reference/simple_stmts.html#the-import-statement)\n- [Python documentation: `importlib.util.find_spec`](https://docs.python.org/3/library/importlib.html#importlib.util.find_spec)\n- [Typing documentation: interface conventions](https://typing.python.org/en/latest/spec/distributing.html#library-interface-public-and-private-symbols)\n"
               },
               "help": {
                 "text": "`{name}` imported but unused; consider using `importlib.util.find_spec` to test for availability"

crates/ruff_benchmark/benches/ty.rs

@@ -450,9 +450,6 @@ fn benchmark_complex_constrained_attributes_2(criterion: &mut Criterion) {
                     r#"
                     class C:
                         def f(self: "C"):
-                            self.a = ""
-                            self.b = ""
-
                             if isinstance(self.a, str):
                                 return
 
@@ -466,6 +463,56 @@ fn benchmark_complex_constrained_attributes_2(criterion: &mut Criterion) {
                                 return
                             if isinstance(self.b, str):
                                 return
+                            if isinstance(self.b, str):
+                                return
+                            if isinstance(self.b, str):
+                                return
+
+                            self.a = ""
+                            self.b = ""
+                    "#,
+                )
+            },
+            |case| {
+                let Case { db, .. } = case;
+                let result = db.check();
+                assert_eq!(result.len(), 0);
+            },
+            BatchSize::SmallInput,
+        );
+    });
+}
+
+fn benchmark_complex_constrained_attributes_3(criterion: &mut Criterion) {
+    setup_rayon();
+
+    criterion.bench_function("ty_micro[complex_constrained_attributes_3]", |b| {
+        b.iter_batched_ref(
+            || {
+                // This is a regression test for https://github.com/astral-sh/ty/issues/758
+                setup_micro_case(
+                    r#"
+                    class GridOut:
+                        def __init__(self: "GridOut") -> None:
+                            self._buffer = b""
+
+                        def _read_size_or_line(self: "GridOut", size: int = -1):
+                            if size > self._position:
+                                size = self._position
+                                pass
+                            if size == 0:
+                                return bytes()
+
+                            while size > 0:
+                                if self._buffer:
+                                    buf = self._buffer
+                                    self._buffer = b""
+                                else:
+                                    buf = b""
+
+                                if len(buf) > size:
+                                    self._buffer = buf
+                                    self._position -= len(self._buffer)
                     "#,
                 )
             },
@@ -668,6 +715,7 @@ criterion_group!(
     benchmark_tuple_implicit_instance_attributes,
     benchmark_complex_constrained_attributes_1,
     benchmark_complex_constrained_attributes_2,
+    benchmark_complex_constrained_attributes_3,
     benchmark_many_enum_members,
 );
 criterion_group!(project, anyio, attrs, hydra, datetype);

crates/ruff_db/Cargo.toml

@@ -34,6 +34,7 @@ glob = { workspace = true }
 ignore = { workspace = true, optional = true }
 matchit = { workspace = true }
 path-slash = { workspace = true }
+pathdiff = { workspace = true }
 quick-junit = { workspace = true, optional = true }
 rustc-hash = { workspace = true }
 salsa = { workspace = true }
@@ -53,7 +54,7 @@ web-time = { version = "1.1.0" }
 etcetera = { workspace = true, optional = true }
 
 [dev-dependencies]
-insta = { workspace = true }
+insta = { workspace = true, features = ["filters"] }
 tempfile = { workspace = true }
 
 [features]

crates/ruff_db/src/diagnostic/mod.rs

@@ -349,6 +349,13 @@ impl Diagnostic {
         self.fix().is_some()
     }
 
+    /// Returns `true` if the diagnostic is [`fixable`](Diagnostic::fixable) and applies at the
+    /// configured applicability level.
+    pub fn has_applicable_fix(&self, config: &DisplayDiagnosticConfig) -> bool {
+        self.fix()
+            .is_some_and(|fix| fix.applies(config.fix_applicability))
+    }
+
     /// Returns the offset of the parent statement for this diagnostic if it exists.
     ///
     /// This is primarily used for checking noqa/secondary code suppressions.
@@ -447,24 +454,26 @@ impl Diagnostic {
 
     /// Computes the start source location for the message.
     ///
-    /// Panics if the diagnostic has no primary span, if its file is not a `SourceFile`, or if the
-    /// span has no range.
-    pub fn expect_ruff_start_location(&self) -> LineColumn {
-        self.expect_primary_span()
-            .expect_ruff_file()
-            .to_source_code()
-            .line_column(self.expect_range().start())
+    /// Returns None if the diagnostic has no primary span, if its file is not a `SourceFile`,
+    /// or if the span has no range.
+    pub fn ruff_start_location(&self) -> Option<LineColumn> {
+        Some(
+            self.ruff_source_file()?
+                .to_source_code()
+                .line_column(self.range()?.start()),
+        )
     }
 
     /// Computes the end source location for the message.
     ///
-    /// Panics if the diagnostic has no primary span, if its file is not a `SourceFile`, or if the
-    /// span has no range.
-    pub fn expect_ruff_end_location(&self) -> LineColumn {
-        self.expect_primary_span()
-            .expect_ruff_file()
-            .to_source_code()
-            .line_column(self.expect_range().end())
+    /// Returns None if the diagnostic has no primary span, if its file is not a `SourceFile`,
+    /// or if the span has no range.
+    pub fn ruff_end_location(&self) -> Option<LineColumn> {
+        Some(
+            self.ruff_source_file()?
+                .to_source_code()
+                .line_column(self.range()?.end()),
+        )
     }
 
     /// Returns the [`SourceFile`] which the message belongs to.
@@ -494,13 +503,18 @@ impl Diagnostic {
 
     /// Returns the ordering of diagnostics based on the start of their ranges, if they have any.
     ///
-    /// Panics if either diagnostic has no primary span, if the span has no range, or if its file is
-    /// not a `SourceFile`.
+    /// Panics if either diagnostic has no primary span, or if its file is not a `SourceFile`.
     pub fn ruff_start_ordering(&self, other: &Self) -> std::cmp::Ordering {
-        (self.expect_ruff_source_file(), self.expect_range().start()).cmp(&(
+        let a = (
+            self.expect_ruff_source_file(),
+            self.range().map(|r| r.start()),
+        );
+        let b = (
             other.expect_ruff_source_file(),
-            other.expect_range().start(),
-        ))
+            other.range().map(|r| r.start()),
+        );
+
+        a.cmp(&b)
     }
 }
 
@@ -1435,6 +1449,11 @@ pub enum DiagnosticFormat {
     /// Print diagnostics in the format expected by JUnit.
     #[cfg(feature = "junit")]
     Junit,
+    /// Print diagnostics in the JSON format used by GitLab [Code Quality] reports.
+    ///
+    /// [Code Quality]: https://docs.gitlab.com/ci/testing/code_quality/#code-quality-report-format
+    #[cfg(feature = "serde")]
+    Gitlab,
 }
 
 /// A representation of the kinds of messages inside a diagnostic.

crates/ruff_db/src/diagnostic/render.rs

@@ -31,6 +31,8 @@ mod azure;
 mod concise;
 mod full;
 #[cfg(feature = "serde")]
+mod gitlab;
+#[cfg(feature = "serde")]
 mod json;
 #[cfg(feature = "serde")]
 mod json_lines;
@@ -136,6 +138,10 @@ impl std::fmt::Display for DisplayDiagnostics<'_> {
             DiagnosticFormat::Junit => {
                 junit::JunitRenderer::new(self.resolver).render(f, self.diagnostics)?;
             }
+            #[cfg(feature = "serde")]
+            DiagnosticFormat::Gitlab => {
+                gitlab::GitlabRenderer::new(self.resolver).render(f, self.diagnostics)?;
+            }
         }
 
         Ok(())
@@ -248,9 +254,7 @@ impl<'a> ResolvedDiagnostic<'a> {
             id,
             message: diag.inner.message.as_str().to_string(),
             annotations,
-            is_fixable: diag
-                .fix()
-                .is_some_and(|fix| fix.applies(config.fix_applicability)),
+            is_fixable: diag.has_applicable_fix(config),
         }
     }
 

crates/ruff_db/src/diagnostic/render/concise.rs

@@ -77,11 +77,9 @@ impl<'a> ConciseRenderer<'a> {
                     )?;
                 }
                 if self.config.show_fix_status {
-                    if let Some(fix) = diag.fix() {
-                        // Do not display an indicator for inapplicable fixes
-                        if fix.applies(self.config.fix_applicability) {
-                            write!(f, "[{fix}] ", fix = fmt_styled("*", stylesheet.separator))?;
-                        }
+                    // Do not display an indicator for inapplicable fixes
+                    if diag.has_applicable_fix(self.config) {
+                        write!(f, "[{fix}] ", fix = fmt_styled("*", stylesheet.separator))?;
                     }
                 }
             } else {

crates/ruff_db/src/diagnostic/render/full.rs

@@ -1,12 +1,11 @@
 use std::borrow::Cow;
 use std::num::NonZeroUsize;
 
-use anstyle::Style;
-use ruff_notebook::NotebookIndex;
 use similar::{ChangeTag, TextDiff};
 
 use ruff_annotate_snippets::Renderer as AnnotateRenderer;
 use ruff_diagnostics::{Applicability, Fix};
+use ruff_notebook::NotebookIndex;
 use ruff_source_file::OneIndexed;
 use ruff_text_size::{Ranged, TextLen, TextRange, TextSize};
 
@@ -58,13 +57,14 @@ impl<'a> FullRenderer<'a> {
             for diag in renderable.diagnostics.iter() {
                 writeln!(f, "{}", renderer.render(diag.to_annotate()))?;
             }
-            writeln!(f)?;
 
-            if self.config.show_fix_diff {
+            if self.config.show_fix_diff && diag.has_applicable_fix(self.config) {
                 if let Some(diff) = Diff::from_diagnostic(diag, &stylesheet, self.resolver) {
-                    writeln!(f, "{diff}")?;
+                    write!(f, "{diff}")?;
                 }
             }
+
+            writeln!(f)?;
         }
 
         Ok(())
@@ -126,19 +126,6 @@ impl std::fmt::Display for Diff<'_> {
             vec![(None, source_text.text_len())]
         };
 
-        let message = match self.fix.applicability() {
-            // TODO(zanieb): Adjust this messaging once it's user-facing
-            Applicability::Safe => "Safe fix",
-            Applicability::Unsafe => "Unsafe fix",
-            Applicability::DisplayOnly => "Display-only fix",
-        };
-
-        // TODO(brent) `stylesheet.separator` is cyan rather than blue, as we had before. I think
-        // we're getting rid of this soon anyway, so I didn't think it was worth adding another
-        // style to the stylesheet temporarily. The color doesn't appear at all in the snapshot
-        // tests, which is the only place these are currently used.
-        writeln!(f, "ℹ {}", fmt_styled(message, self.stylesheet.separator))?;
-
         let mut last_end = TextSize::ZERO;
         for (cell, offset) in cells {
             let range = TextRange::new(last_end, offset);
@@ -167,64 +154,67 @@ impl std::fmt::Display for Diff<'_> {
 
             let diff = TextDiff::from_lines(input, &output);
 
-            let (largest_old, largest_new) = diff
-                .ops()
-                .last()
-                .map(|op| (op.old_range().start, op.new_range().start))
-                .unwrap_or_default();
+            let grouped_ops = diff.grouped_ops(3);
 
-            let digit_with = OneIndexed::from_zero_indexed(largest_new.max(largest_old)).digits();
+            // Find the new line number with the largest number of digits to align all of the line
+            // number separators.
+            let last_op = grouped_ops.last().and_then(|group| group.last());
+            let largest_new = last_op.map(|op| op.new_range().end).unwrap_or_default();
+
+            let digit_with = OneIndexed::new(largest_new).unwrap_or_default().digits();
 
             if let Some(cell) = cell {
-                // Room for 2 digits, 2 x 1 space before each digit, 1 space, and 1 `|`. This
-                // centers the three colons on the pipe.
-                writeln!(f, "{:>1$} cell {cell}", ":::", 2 * digit_with.get() + 4)?;
+                // Room for 1 digit, 1 space, 1 `|`, and 1 more following space. This centers the
+                // three colons on the pipe.
+                writeln!(f, "{:>1$} cell {cell}", ":::", digit_with.get() + 3)?;
             }
 
-            for (idx, group) in diff.grouped_ops(3).iter().enumerate() {
+            for (idx, group) in grouped_ops.iter().enumerate() {
                 if idx > 0 {
                     writeln!(f, "{:-^1$}", "-", 80)?;
                 }
                 for op in group {
                     for change in diff.iter_inline_changes(op) {
-                        let sign = match change.tag() {
-                            ChangeTag::Delete => "-",
-                            ChangeTag::Insert => "+",
-                            ChangeTag::Equal => " ",
+                        let (sign, style, line_no_style, index) = match change.tag() {
+                            ChangeTag::Delete => (
+                                "-",
+                                self.stylesheet.deletion,
+                                self.stylesheet.deletion_line_no,
+                                None,
+                            ),
+                            ChangeTag::Insert => (
+                                "+",
+                                self.stylesheet.insertion,
+                                self.stylesheet.insertion_line_no,
+                                change.new_index(),
+                            ),
+                            ChangeTag::Equal => (
+                                "|",
+                                self.stylesheet.none,
+                                self.stylesheet.line_no,
+                                change.new_index(),
+                            ),
                         };
 
-                        let line_style = LineStyle::from(change.tag(), self.stylesheet);
-
-                        let old_index = change.old_index().map(OneIndexed::from_zero_indexed);
-                        let new_index = change.new_index().map(OneIndexed::from_zero_indexed);
+                        let line = Line {
+                            index: index.map(OneIndexed::from_zero_indexed),
+                            width: digit_with,
+                        };
 
                         write!(
                             f,
-                            "{} {} |{}",
-                            Line {
-                                index: old_index,
-                                width: digit_with,
-                            },
-                            Line {
-                                index: new_index,
-                                width: digit_with,
-                            },
-                            fmt_styled(line_style.apply_to(sign), self.stylesheet.emphasis),
+                            "{line} {sign} ",
+                            line = fmt_styled(line, self.stylesheet.line_no),
+                            sign = fmt_styled(sign, line_no_style),
                         )?;
 
                         for (emphasized, value) in change.iter_strings_lossy() {
                             let value = show_nonprinting(&value);
+                            let styled = fmt_styled(value, style);
                             if emphasized {
-                                write!(
-                                    f,
-                                    "{}",
-                                    fmt_styled(
-                                        line_style.apply_to(&value),
-                                        self.stylesheet.underline
-                                    )
-                                )?;
+                                write!(f, "{}", fmt_styled(styled, self.stylesheet.emphasis))?;
                             } else {
-                                write!(f, "{}", line_style.apply_to(&value))?;
+                                write!(f, "{styled}")?;
                             }
                         }
                         if change.missing_newline() {
@@ -235,31 +225,35 @@ impl std::fmt::Display for Diff<'_> {
             }
         }
 
-        Ok(())
-    }
-}
-
-struct LineStyle {
-    style: Style,
-}
-
-impl LineStyle {
-    fn apply_to(&self, input: &str) -> impl std::fmt::Display {
-        fmt_styled(input, self.style)
-    }
-
-    fn from(value: ChangeTag, stylesheet: &DiagnosticStylesheet) -> LineStyle {
-        match value {
-            ChangeTag::Equal => LineStyle {
-                style: stylesheet.none,
-            },
-            ChangeTag::Delete => LineStyle {
-                style: stylesheet.deletion,
-            },
-            ChangeTag::Insert => LineStyle {
-                style: stylesheet.insertion,
-            },
+        match self.fix.applicability() {
+            Applicability::Safe => {}
+            Applicability::Unsafe => {
+                writeln!(
+                    f,
+                    "{note}: {msg}",
+                    note = fmt_styled("note", self.stylesheet.warning),
+                    msg = fmt_styled(
+                        "This is an unsafe fix and may change runtime behavior",
+                        self.stylesheet.emphasis
+                    )
+                )?;
+            }
+            Applicability::DisplayOnly => {
+                // Note that this is still only used in tests. There's no `--display-only-fixes`
+                // analog to `--unsafe-fixes` for users to activate this or see the styling.
+                writeln!(
+                    f,
+                    "{note}: {msg}",
+                    note = fmt_styled("note", self.stylesheet.error),
+                    msg = fmt_styled(
+                        "This is a display-only fix and is likely to be incorrect",
+                        self.stylesheet.emphasis
+                    )
+                )?;
+            }
         }
+
+        Ok(())
     }
 }
 
@@ -297,7 +291,7 @@ fn show_nonprinting(s: &str) -> Cow<'_, str> {
 
 #[cfg(test)]
 mod tests {
-    use ruff_diagnostics::{Applicability, Fix};
+    use ruff_diagnostics::{Applicability, Edit, Fix};
     use ruff_text_size::{TextLen, TextRange, TextSize};
 
     use crate::diagnostic::{
@@ -703,6 +697,8 @@ print()
     fn notebook_output_with_diff() {
         let (mut env, diagnostics) = create_notebook_diagnostics(DiagnosticFormat::Full);
         env.show_fix_diff(true);
+        env.fix_applicability(Applicability::DisplayOnly);
+
         insta::assert_snapshot!(env.render_diagnostics(&diagnostics), @r"
         error[unused-import][*]: `os` imported but unused
          --> notebook.ipynb:cell 1:2:8
@@ -712,11 +708,9 @@ print()
           |        ^^
           |
         help: Remove unused import: `os`
-
-        ℹ Safe fix
-           ::: cell 1
-        1 1 | # cell 1
-        2   |-import os
+         ::: cell 1
+        1 | # cell 1
+          - import os
 
         error[unused-import][*]: `math` imported but unused
          --> notebook.ipynb:cell 2:2:8
@@ -728,15 +722,13 @@ print()
         4 | print('hello world')
           |
         help: Remove unused import: `math`
+         ::: cell 2
+        1 | # cell 2
+          - import math
+        2 | 
+        3 | print('hello world')
 
-        ℹ Safe fix
-           ::: cell 2
-        1 1 | # cell 2
-        2   |-import math
-        3 2 | 
-        4 3 | print('hello world')
-
-        error[unused-variable]: Local variable `x` is assigned to but never used
+        error[unused-variable][*]: Local variable `x` is assigned to but never used
          --> notebook.ipynb:cell 3:4:5
           |
         2 | def foo():
@@ -745,14 +737,13 @@ print()
           |     ^
           |
         help: Remove assignment to unused variable `x`
-
-        ℹ Unsafe fix
-           ::: cell 3
-        1 1 | # cell 3
-        2 2 | def foo():
-        3 3 |     print()
-        4   |-    x = 1
-        5 4 |
+         ::: cell 3
+        1 | # cell 3
+        2 | def foo():
+        3 |     print()
+          -     x = 1
+        4 | 
+        note: This is an unsafe fix and may change runtime behavior
         ");
     }
 
@@ -760,6 +751,7 @@ print()
     fn notebook_output_with_diff_spanning_cells() {
         let (mut env, mut diagnostics) = create_notebook_diagnostics(DiagnosticFormat::Full);
         env.show_fix_diff(true);
+        env.fix_applicability(Applicability::DisplayOnly);
 
         // Move all of the edits from the later diagnostics to the first diagnostic to simulate a
         // single diagnostic with edits in different cells.
@@ -772,7 +764,7 @@ print()
         *fix = Fix::unsafe_edits(edits.remove(0), edits);
 
         insta::assert_snapshot!(env.render(&diagnostic), @r"
-        error[unused-import]: `os` imported but unused
+        error[unused-import][*]: `os` imported but unused
          --> notebook.ipynb:cell 1:2:8
           |
         1 | # cell 1
@@ -780,22 +772,21 @@ print()
           |        ^^
           |
         help: Remove unused import: `os`
-
-        ℹ Unsafe fix
-           ::: cell 1
-        1 1 | # cell 1
-        2   |-import os
-           ::: cell 2
-        1 1 | # cell 2
-        2   |-import math
-        3 2 | 
-        4 3 | print('hello world')
-           ::: cell 3
-        1 1 | # cell 3
-        2 2 | def foo():
-        3 3 |     print()
-        4   |-    x = 1
-        5 4 |
+         ::: cell 1
+        1 | # cell 1
+          - import os
+         ::: cell 2
+        1 | # cell 2
+          - import math
+        2 | 
+        3 | print('hello world')
+         ::: cell 3
+        1 | # cell 3
+        2 | def foo():
+        3 |     print()
+          -     x = 1
+        4 | 
+        note: This is an unsafe fix and may change runtime behavior
         ");
     }
 
@@ -901,4 +892,74 @@ print()
           |
         ");
     }
+
+    /// Test that we handle the width calculation for the line number correctly even for context
+    /// lines at the end of a diff. For example, we want it to render like this:
+    ///
+    /// ```
+    /// 8  |
+    /// 9  |
+    /// 10 |
+    /// ```
+    ///
+    /// and not like this:
+    ///
+    /// ```
+    /// 8 |
+    /// 9 |
+    /// 10 |
+    /// ```
+    #[test]
+    fn longer_line_number_end_of_context() {
+        let mut env = TestEnvironment::new();
+        let contents = "\
+line 1
+line 2
+line 3
+line 4
+line 5
+line 6
+line 7
+line 8
+line 9
+line 10
+        ";
+        env.add("example.py", contents);
+        env.format(DiagnosticFormat::Full);
+        env.show_fix_diff(true);
+        env.fix_applicability(Applicability::DisplayOnly);
+
+        let mut diagnostic = env.err().primary("example.py", "3", "3", "label").build();
+        diagnostic.help("Start of diff:");
+        let target = "line 7";
+        let line9 = contents.find(target).unwrap();
+        let range = TextRange::at(TextSize::try_from(line9).unwrap(), target.text_len());
+        diagnostic.set_fix(Fix::unsafe_edit(Edit::range_replacement(
+            format!("fixed {target}"),
+            range,
+        )));
+
+        insta::assert_snapshot!(env.render(&diagnostic), @r"
+        error[test-diagnostic][*]: main diagnostic message
+         --> example.py:3:1
+          |
+        1 | line 1
+        2 | line 2
+        3 | line 3
+          | ^^^^^^ label
+        4 | line 4
+        5 | line 5
+          |
+        help: Start of diff:
+        4  | line 4
+        5  | line 5
+        6  | line 6
+           - line 7
+        7  + fixed line 7
+        8  | line 8
+        9  | line 9
+        10 | line 10
+        note: This is an unsafe fix and may change runtime behavior
+        ");
+    }
 }

crates/ruff_db/src/diagnostic/render/gitlab.rs

@@ -0,0 +1,205 @@
+use std::{
+    collections::HashSet,
+    hash::{DefaultHasher, Hash, Hasher},
+    path::Path,
+};
+
+use ruff_source_file::LineColumn;
+use serde::{Serialize, Serializer, ser::SerializeSeq};
+
+use crate::diagnostic::{Diagnostic, Severity};
+
+use super::FileResolver;
+
+pub(super) struct GitlabRenderer<'a> {
+    resolver: &'a dyn FileResolver,
+}
+
+impl<'a> GitlabRenderer<'a> {
+    pub(super) fn new(resolver: &'a dyn FileResolver) -> Self {
+        Self { resolver }
+    }
+}
+
+impl GitlabRenderer<'_> {
+    pub(super) fn render(
+        &self,
+        f: &mut std::fmt::Formatter,
+        diagnostics: &[Diagnostic],
+    ) -> std::fmt::Result {
+        write!(
+            f,
+            "{}",
+            serde_json::to_string_pretty(&SerializedMessages {
+                diagnostics,
+                resolver: self.resolver,
+                #[expect(
+                    clippy::disallowed_methods,
+                    reason = "We don't have access to a `System` here, \
+                              and this is only intended for use by GitLab CI, \
+                              which runs on a real `System`."
+                )]
+                project_dir: std::env::var("CI_PROJECT_DIR").ok().as_deref(),
+            })
+            .unwrap()
+        )
+    }
+}
+
+struct SerializedMessages<'a> {
+    diagnostics: &'a [Diagnostic],
+    resolver: &'a dyn FileResolver,
+    project_dir: Option<&'a str>,
+}
+
+impl Serialize for SerializedMessages<'_> {
+    fn serialize<S>(&self, serializer: S) -> Result<S::Ok, S::Error>
+    where
+        S: Serializer,
+    {
+        let mut s = serializer.serialize_seq(Some(self.diagnostics.len()))?;
+        let mut fingerprints = HashSet::<u64>::with_capacity(self.diagnostics.len());
+
+        for diagnostic in self.diagnostics {
+            let location = diagnostic
+                .primary_span()
+                .map(|span| {
+                    let file = span.file();
+                    let positions = if self.resolver.is_notebook(file) {
+                        // We can't give a reasonable location for the structured formats,
+                        // so we show one that's clearly a fallback
+                        Default::default()
+                    } else {
+                        let diagnostic_source = file.diagnostic_source(self.resolver);
+                        let source_code = diagnostic_source.as_source_code();
+                        span.range()
+                            .map(|range| Positions {
+                                begin: source_code.line_column(range.start()),
+                                end: source_code.line_column(range.end()),
+                            })
+                            .unwrap_or_default()
+                    };
+
+                    let path = self.project_dir.as_ref().map_or_else(
+                        || file.relative_path(self.resolver).display().to_string(),
+                        |project_dir| relativize_path_to(file.path(self.resolver), project_dir),
+                    );
+
+                    Location { path, positions }
+                })
+                .unwrap_or_default();
+
+            let mut message_fingerprint = fingerprint(diagnostic, &location.path, 0);
+
+            // Make sure that we do not get a fingerprint that is already in use
+            // by adding in the previously generated one.
+            while fingerprints.contains(&message_fingerprint) {
+                message_fingerprint = fingerprint(diagnostic, &location.path, message_fingerprint);
+            }
+            fingerprints.insert(message_fingerprint);
+
+            let description = diagnostic.body();
+            let check_name = diagnostic.secondary_code_or_id();
+            let severity = match diagnostic.severity() {
+                Severity::Info => "info",
+                Severity::Warning => "minor",
+                Severity::Error => "major",
+                // Another option here is `blocker`
+                Severity::Fatal => "critical",
+            };
+
+            let value = Message {
+                check_name,
+                // GitLab doesn't display the separate `check_name` field in a Code Quality report,
+                // so prepend it to the description too.
+                description: format!("{check_name}: {description}"),
+                severity,
+                fingerprint: format!("{:x}", message_fingerprint),
+                location,
+            };
+
+            s.serialize_element(&value)?;
+        }
+
+        s.end()
+    }
+}
+
+#[derive(Serialize)]
+struct Message<'a> {
+    check_name: &'a str,
+    description: String,
+    severity: &'static str,
+    fingerprint: String,
+    location: Location,
+}
+
+/// The place in the source code where the issue was discovered.
+///
+/// According to the CodeClimate report format [specification] linked from the GitLab [docs], this
+/// field is required, so we fall back on a default `path` and position if the diagnostic doesn't
+/// have a primary span.
+///
+/// [specification]: https://github.com/codeclimate/platform/blob/master/spec/analyzers/SPEC.md#data-types
+/// [docs]: https://docs.gitlab.com/ci/testing/code_quality/#code-quality-report-format
+#[derive(Default, Serialize)]
+struct Location {
+    path: String,
+    positions: Positions,
+}
+
+#[derive(Default, Serialize)]
+struct Positions {
+    begin: LineColumn,
+    end: LineColumn,
+}
+
+/// Generate a unique fingerprint to identify a violation.
+fn fingerprint(diagnostic: &Diagnostic, project_path: &str, salt: u64) -> u64 {
+    let mut hasher = DefaultHasher::new();
+
+    salt.hash(&mut hasher);
+    diagnostic.name().hash(&mut hasher);
+    project_path.hash(&mut hasher);
+
+    hasher.finish()
+}
+
+/// Convert an absolute path to be relative to the specified project root.
+fn relativize_path_to<P: AsRef<Path>, R: AsRef<Path>>(path: P, project_root: R) -> String {
+    format!(
+        "{}",
+        pathdiff::diff_paths(&path, project_root)
+            .expect("Could not diff paths")
+            .display()
+    )
+}
+
+#[cfg(test)]
+mod tests {
+    use crate::diagnostic::{
+        DiagnosticFormat,
+        render::tests::{create_diagnostics, create_syntax_error_diagnostics},
+    };
+
+    const FINGERPRINT_FILTERS: [(&str, &str); 1] = [(
+        r#""fingerprint": "[a-z0-9]+","#,
+        r#""fingerprint": "<redacted>","#,
+    )];
+
+    #[test]
+    fn output() {
+        let (env, diagnostics) = create_diagnostics(DiagnosticFormat::Gitlab);
+        insta::with_settings!({filters => FINGERPRINT_FILTERS}, {
+            insta::assert_snapshot!(env.render_diagnostics(&diagnostics));
+        });
+    }
+
+    #[test]
+    fn syntax_errors() {
+        let (env, diagnostics) = create_syntax_error_diagnostics(DiagnosticFormat::Gitlab);
+        insta::with_settings!({filters => FINGERPRINT_FILTERS}, {
+            insta::assert_snapshot!(env.render_diagnostics(&diagnostics));
+        });
+    }
+}

crates/ruff_db/src/diagnostic/render/snapshots/ruff_db__diagnostic__render__gitlab__tests__output.snap

@@ -1,63 +1,63 @@
 ---
-source: crates/ruff_linter/src/message/gitlab.rs
-expression: redact_fingerprint(&content)
+source: crates/ruff_db/src/diagnostic/render/gitlab.rs
+expression: env.render_diagnostics(&diagnostics)
 ---
 [
   {
     "check_name": "F401",
     "description": "F401: `os` imported but unused",
+    "severity": "major",
     "fingerprint": "<redacted>",
     "location": {
       "path": "fib.py",
       "positions": {
         "begin": {
-          "column": 8,
-          "line": 1
+          "line": 1,
+          "column": 8
         },
         "end": {
-          "column": 10,
-          "line": 1
+          "line": 1,
+          "column": 10
         }
       }
-    },
-    "severity": "major"
+    }
   },
   {
     "check_name": "F841",
     "description": "F841: Local variable `x` is assigned to but never used",
+    "severity": "major",
     "fingerprint": "<redacted>",
     "location": {
       "path": "fib.py",
       "positions": {
         "begin": {
-          "column": 5,
-          "line": 6
+          "line": 6,
+          "column": 5
         },
         "end": {
-          "column": 6,
-          "line": 6
+          "line": 6,
+          "column": 6
         }
       }
-    },
-    "severity": "major"
+    }
   },
   {
     "check_name": "F821",
     "description": "F821: Undefined name `a`",
+    "severity": "major",
     "fingerprint": "<redacted>",
     "location": {
       "path": "undef.py",
       "positions": {
         "begin": {
-          "column": 4,
-          "line": 1
+          "line": 1,
+          "column": 4
         },
         "end": {
-          "column": 5,
-          "line": 1
+          "line": 1,
+          "column": 5
         }
       }
-    },
-    "severity": "major"
+    }
   }
 ]

crates/ruff_db/src/diagnostic/render/snapshots/ruff_db__diagnostic__render__gitlab__tests__syntax_errors.snap

@@ -1,44 +1,44 @@
 ---
-source: crates/ruff_linter/src/message/gitlab.rs
-expression: redact_fingerprint(&content)
+source: crates/ruff_db/src/diagnostic/render/gitlab.rs
+expression: env.render_diagnostics(&diagnostics)
 ---
 [
   {
     "check_name": "invalid-syntax",
     "description": "invalid-syntax: Expected one or more symbol names after import",
+    "severity": "major",
     "fingerprint": "<redacted>",
     "location": {
       "path": "syntax_errors.py",
       "positions": {
         "begin": {
-          "column": 15,
-          "line": 1
+          "line": 1,
+          "column": 15
         },
         "end": {
-          "column": 1,
-          "line": 2
+          "line": 2,
+          "column": 1
         }
       }
-    },
-    "severity": "major"
+    }
   },
   {
     "check_name": "invalid-syntax",
     "description": "invalid-syntax: Expected ')', found newline",
+    "severity": "major",
     "fingerprint": "<redacted>",
     "location": {
       "path": "syntax_errors.py",
       "positions": {
         "begin": {
-          "column": 12,
-          "line": 3
+          "line": 3,
+          "column": 12
         },
         "end": {
-          "column": 1,
-          "line": 4
+          "line": 4,
+          "column": 1
         }
       }
-    },
-    "severity": "major"
+    }
   }
 ]

crates/ruff_db/src/diagnostic/stylesheet.rs

@@ -40,12 +40,13 @@ pub struct DiagnosticStylesheet {
     pub(crate) help: Style,
     pub(crate) line_no: Style,
     pub(crate) emphasis: Style,
-    pub(crate) underline: Style,
     pub(crate) none: Style,
     pub(crate) separator: Style,
     pub(crate) secondary_code: Style,
     pub(crate) insertion: Style,
     pub(crate) deletion: Style,
+    pub(crate) insertion_line_no: Style,
+    pub(crate) deletion_line_no: Style,
 }
 
 impl Default for DiagnosticStylesheet {
@@ -66,12 +67,13 @@ impl DiagnosticStylesheet {
             help: AnsiColor::BrightCyan.on_default().effects(Effects::BOLD),
             line_no: bright_blue.effects(Effects::BOLD),
             emphasis: Style::new().effects(Effects::BOLD),
-            underline: Style::new().effects(Effects::UNDERLINE),
             none: Style::new(),
             separator: AnsiColor::Cyan.on_default(),
             secondary_code: AnsiColor::Red.on_default().effects(Effects::BOLD),
             insertion: AnsiColor::Green.on_default(),
             deletion: AnsiColor::Red.on_default(),
+            insertion_line_no: AnsiColor::Green.on_default().effects(Effects::BOLD),
+            deletion_line_no: AnsiColor::Red.on_default().effects(Effects::BOLD),
         }
     }
 
@@ -84,12 +86,13 @@ impl DiagnosticStylesheet {
             help: Style::new(),
             line_no: Style::new(),
             emphasis: Style::new(),
-            underline: Style::new(),
             none: Style::new(),
             separator: Style::new(),
             secondary_code: Style::new(),
             insertion: Style::new(),
             deletion: Style::new(),
+            insertion_line_no: Style::new(),
+            deletion_line_no: Style::new(),
         }
     }
 }

crates/ruff_formatter/src/lib.rs

@@ -81,14 +81,19 @@ impl IndentStyle {
     pub const fn is_space(&self) -> bool {
         matches!(self, IndentStyle::Space)
     }
+
+    /// Returns the string representation of the indent style.
+    pub const fn as_str(&self) -> &'static str {
+        match self {
+            IndentStyle::Tab => "tab",
+            IndentStyle::Space => "space",
+        }
+    }
 }
 
 impl std::fmt::Display for IndentStyle {
     fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
-        match self {
-            IndentStyle::Tab => std::write!(f, "tab"),
-            IndentStyle::Space => std::write!(f, "space"),
-        }
+        f.write_str(self.as_str())
     }
 }
 

crates/ruff_formatter/src/printer/printer_options/mod.rs

@@ -139,4 +139,16 @@ impl LineEnding {
             LineEnding::CarriageReturn => "\r",
         }
     }
+
+    /// Returns the string used to configure this line ending.
+    ///
+    /// See [`LineEnding::as_str`] for the actual string representation of the line ending.
+    #[inline]
+    pub const fn as_setting_str(&self) -> &'static str {
+        match self {
+            LineEnding::LineFeed => "lf",
+            LineEnding::CarriageReturnLineFeed => "crlf",
+            LineEnding::CarriageReturn => "cr",
+        }
+    }
 }

crates/ruff_linter/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "ruff_linter"
-version = "0.12.10"
+version = "0.13.0"
 publish = false
 authors = { workspace = true }
 edition = { workspace = true }
@@ -51,7 +51,6 @@ path-absolutize = { workspace = true, features = [
     "once_cell_cache",
     "use_unix_paths_on_wasm",
 ] }
-pathdiff = { workspace = true }
 pep440_rs = { workspace = true }
 pyproject-toml = { workspace = true }
 regex = { workspace = true }

crates/ruff_linter/resources/test/fixtures/airflow/AIR301_names.py

@@ -12,6 +12,7 @@ from airflow import (
 from airflow.api_connexion.security import requires_access
 from airflow.contrib.aws_athena_hook import AWSAthenaHook
 from airflow.datasets import DatasetAliasEvent
+from airflow.operators.postgres_operator import Mapping
 from airflow.operators.subdag import SubDagOperator
 from airflow.secrets.cache import SecretCache
 from airflow.secrets.local_filesystem import LocalFilesystemBackend
@@ -52,6 +53,8 @@ DatasetAliasEvent()
 # airflow.operators.subdag.*
 SubDagOperator()
 
+# airflow.operators.postgres_operator
+Mapping()
 
 # airflow.secrets
 # get_connection

crates/ruff_linter/resources/test/fixtures/airflow/AIR311_names.py

@@ -34,7 +34,7 @@ task_group()
 setup()
 from airflow.decorators import teardown
 from airflow.io.path import ObjectStoragePath
-from airflow.io.storage import attach
+from airflow.io.store import attach
 from airflow.models import DAG as DAGFromModel
 from airflow.models import (
     Connection,
@@ -70,7 +70,40 @@ from airflow.timetables.datasets import DatasetOrTimeSchedule
 from airflow.utils.dag_parsing_context import get_parsing_context
 
 # airflow.timetables.datasets
-DatasetOrTimeSchedule()
+DatasetOrTimeSchedule(datasets=[])
 
 # airflow.utils.dag_parsing_context
 get_parsing_context()
+
+from airflow.decorators.base import (
+    DecoratedMappedOperator,
+    DecoratedOperator,
+    TaskDecorator,
+    get_unique_task_id,
+    task_decorator_factory,
+)
+
+# airflow.decorators.base
+DecoratedMappedOperator()
+DecoratedOperator()
+TaskDecorator()
+get_unique_task_id()
+task_decorator_factory()
+
+
+from airflow.models import Param
+
+# airflow.models
+Param()
+
+
+from airflow.sensors.base import (
+    BaseSensorOperator,
+    PokeReturnValue,
+    poke_mode_only,
+)
+
+# airflow.sensors.base
+BaseSensorOperator()
+PokeReturnValue()
+poke_mode_only()

crates/ruff_linter/resources/test/fixtures/airflow/AIR312.py

@@ -9,7 +9,6 @@ from airflow.operators.empty import EmptyOperator
 from airflow.operators.latest_only import LatestOnlyOperator
 from airflow.operators.trigger_dagrun import TriggerDagRunOperator
 from airflow.operators.weekday import BranchDayOfWeekOperator
-from airflow.sensors.date_time import DateTimeSensor
 
 FSHook()
 PackageIndexHook()
@@ -22,7 +21,6 @@ EmptyOperator()
 
 LatestOnlyOperator()
 BranchDayOfWeekOperator()
-DateTimeSensor()
 
 from airflow.operators.python import (
     BranchPythonOperator,
@@ -30,16 +28,23 @@ from airflow.operators.python import (
     PythonVirtualenvOperator,
     ShortCircuitOperator,
 )
+from airflow.sensors.bash import BashSensor
+from airflow.sensors.date_time import DateTimeSensor
+
+BranchPythonOperator()
+PythonOperator()
+PythonVirtualenvOperator()
+ShortCircuitOperator()
+
+BashSensor()
+DateTimeSensor()
 from airflow.sensors.date_time import DateTimeSensorAsync
 from airflow.sensors.external_task import (
     ExternalTaskMarker,
     ExternalTaskSensor,
 )
-from airflow.sensors.time_sensor import (
-    TimeSensor,
-    TimeSensorAsync,
-)
 from airflow.sensors.filesystem import FileSensor
+from airflow.sensors.python import PythonSensor
 
 BranchPythonOperator()
 PythonOperator()
@@ -49,6 +54,13 @@ DateTimeSensorAsync()
 ExternalTaskMarker()
 ExternalTaskSensor()
 FileSensor()
+PythonSensor()
+
+from airflow.sensors.time_sensor import (
+    TimeSensor,
+    TimeSensorAsync,
+)
+
 TimeSensor()
 TimeSensorAsync()
 

crates/ruff_linter/resources/test/fixtures/fastapi/FAST003.py

@@ -213,3 +213,17 @@ async def get_id_pydantic_full(
 async def get_id_pydantic_short(params: Annotated[PydanticParams, Depends()]): ...
 @app.get("/{my_id}")
 async def get_id_init_not_annotated(params = Depends(InitParams)): ...
+
+@app.get("/things/{ thing_id }")
+async def read_thing(query: str):
+    return {"query": query}
+
+
+@app.get("/things/{ thing_id : path }")
+async def read_thing(query: str):
+    return {"query": query}
+
+
+@app.get("/things/{ thing_id : str }")
+async def read_thing(query: str):
+    return {"query": query}

crates/ruff_linter/resources/test/fixtures/flake8_async/ASYNC212.py

@@ -0,0 +1,75 @@
+from typing import Optional
+
+import httpx
+
+
+def foo():
+    client = httpx.Client()
+    client.close()  # Ok
+    client.delete()  # Ok
+    client.get()  # Ok
+    client.head()  # Ok
+    client.options()  # Ok
+    client.patch()  # Ok
+    client.post()  # Ok
+    client.put()  # Ok
+    client.request()  # Ok
+    client.send()  # Ok
+    client.stream()  # Ok
+
+    client.anything()  # Ok
+    client.build_request()  # Ok
+    client.is_closed  # Ok
+
+
+async def foo():
+    client = httpx.Client()
+    client.close()  # ASYNC212
+    client.delete()  # ASYNC212
+    client.get()  # ASYNC212
+    client.head()  # ASYNC212
+    client.options()  # ASYNC212
+    client.patch()  # ASYNC212
+    client.post()  # ASYNC212
+    client.put()  # ASYNC212
+    client.request()  # ASYNC212
+    client.send()  # ASYNC212
+    client.stream()  # ASYNC212
+
+    client.anything()  # Ok
+    client.build_request()  # Ok
+    client.is_closed  # Ok
+
+
+async def foo(client: httpx.Client):
+    client.request()  # ASYNC212
+    client.anything()  # Ok
+
+
+async def foo(client: httpx.Client | None):
+    client.request()  # ASYNC212
+    client.anything()  # Ok
+
+
+async def foo(client: Optional[httpx.Client]):
+    client.request()  # ASYNC212
+    client.anything()  # Ok
+
+
+async def foo():
+    client: httpx.Client = ...
+    client.request()  # ASYNC212
+    client.anything()  # Ok
+
+
+global_client = httpx.Client()
+
+
+async def foo():
+    global_client.request()  # ASYNC212
+    global_client.anything()  # Ok
+
+
+async def foo():
+    async with httpx.AsyncClient() as client:
+        await client.get()  # Ok

crates/ruff_linter/resources/test/fixtures/flake8_async/ASYNC250.py

@@ -0,0 +1,22 @@
+def foo():
+    k = input()  # Ok
+    input("hello world")  # Ok
+
+
+async def foo():
+    k = input()  # ASYNC250
+    input("hello world")  # ASYNC250
+
+
+import builtins
+
+import fake
+
+
+def foo():
+    builtins.input("testing")  # Ok
+
+
+async def foo():
+    builtins.input("testing")  # ASYNC250
+    fake.input("whatever")  # Ok

crates/ruff_linter/resources/test/fixtures/flake8_comprehensions/C417.py

@@ -75,3 +75,7 @@ list(map(lambda x, y: x, [(1, 2), (3, 4)]))
 _ = t"{set(map(lambda x: x % 2 == 0, nums))}"
 _ = t"{dict(map(lambda v: (v, v**2), nums))}"
 
+
+# See https://github.com/astral-sh/ruff/issues/20198
+# No error: lambda contains `yield`, so map() should not be rewritten
+map(lambda x: (yield x), [1, 2, 3])

crates/ruff_linter/resources/test/fixtures/flake8_logging_format/G004.py

@@ -17,3 +17,50 @@ info(f"{__name__}")
 # Don't trigger for t-strings
 info(t"{name}")
 info(t"{__name__}")
+
+count = 5
+total = 9
+directory_path = "/home/hamir/ruff/crates/ruff_linter/resources/test/"
+logging.info(f"{count} out of {total} files in {directory_path} checked")
+
+
+
+x = 99
+fmt = "08d"
+logger.info(f"{x:{'08d'}}")
+logger.info(f"{x:>10} {x:{fmt}}")
+
+logging.info(f"")
+logging.info(f"This message doesn't have any variables.")
+
+obj = {"key": "value"}
+logging.info(f"Object: {obj!r}")
+
+items_count = 3
+logging.warning(f"Items: {items_count:d}")
+
+data = {"status": "active"}
+logging.info(f"Processing {len(data)} items")
+logging.info(f"Status: {data.get('status', 'unknown').upper()}")
+
+
+result = 123
+logging.info(f"Calculated result: {result + 100}")
+
+temperature = 123
+logging.info(f"Temperature: {temperature:.1f}°C")
+
+class FilePath:
+    def __init__(self, name: str):
+        self.name = name
+
+logging.info(f"No changes made to {file_path.name}.")
+
+user = "tron"
+balance = 123.45
+logging.error(f"Error {404}: User {user} has insufficient balance ${balance:.2f}")
+
+import logging
+
+x = 1
+logging.error(f"{x} -> %s", x)

crates/ruff_linter/resources/test/fixtures/flake8_logging_format/G004_arg_order.py

@@ -0,0 +1,10 @@
+"""Test f-string argument order."""
+
+import logging
+
+logger = logging.getLogger(__name__)
+
+X = 1
+Y = 2
+logger.error(f"{X} -> %s", Y)
+logger.error(f"{Y} -> %s", X)

crates/ruff_linter/resources/test/fixtures/flake8_pytest_style/PT015.py

@@ -23,3 +23,11 @@ def test_error():
     assert list([])
     assert set(set())
     assert tuple("")
+
+# https://github.com/astral-sh/ruff/issues/19935
+def test_all_ok():
+    assert f"{b""}"
+    assert f"{""=}"
+    assert f"{""!a}"
+    assert f"{""!r}"
+    assert f"{"":1}"

crates/ruff_linter/resources/test/fixtures/perflint/PERF403.py

@@ -192,3 +192,24 @@ def issue_19005_3():
     c = {}
     for a[0], a[1] in ():
         c[a[0]] = a[1]
+
+
+def issue_19153_1():
+    v = {}
+    for o, (x,) in ["ox"]:
+        v[x,] = o
+    return v
+
+
+def issue_19153_2():
+    v = {}
+    for (o, p), x in [("op", "x")]:
+        v[x] = o, p
+    return v
+
+
+def issue_19153_3():
+    v = {}
+    for o, (x,) in ["ox"]: 
+        v[(x,)] = o 
+    return v

crates/ruff_linter/resources/test/fixtures/pycodestyle/E731.py

@@ -190,3 +190,12 @@ foo_tooltip = (
     more
 
 )
+
+# https://github.com/astral-sh/ruff/issues/20097
+def scope():
+    from collections.abc import Callable
+    from typing import ParamSpec
+
+    P = ParamSpec("P")
+    f1: Callable[P, str] = lambda x: str(x)
+    f2: Callable[..., str] = lambda x: str(x)

crates/ruff_linter/resources/test/fixtures/pyflakes/F401_35.py

@@ -0,0 +1,16 @@
+"""
+Test: allowed-unused-imports-top-level-module
+"""
+
+# No errors
+
+def f():
+    import hvplot
+def f():
+    import hvplot.pandas
+def f():
+    import hvplot.pandas.plots
+def f():
+    from hvplot.pandas import scatter_matrix
+def f():
+    from hvplot.pandas.plots import scatter_matrix

crates/ruff_linter/resources/test/fixtures/pyflakes/F841_0.py

@@ -151,3 +151,39 @@ def f():
         pass
     except Exception as _:
         pass
+
+
+# OK, `__class__` in this case is not the special `__class__` cell, so we don't
+# emit a diagnostic. (It has its own special semantics -- see
+# https://github.com/astral-sh/ruff/pull/20048#discussion_r2298338048 -- but
+# those aren't relevant here.)
+class A:
+    __class__ = 1
+
+
+# The following three cases are flagged because they declare local `__class__`
+# variables that don't refer to the special `__class__` cell.
+class A:
+    def set_class(self, cls):
+        __class__ = cls  # F841
+
+
+class A:
+    class B:
+        def set_class(self, cls):
+            __class__ = cls  # F841
+
+
+class A:
+    def foo():
+        class B:
+            print(__class__)
+            def set_class(self, cls):
+                __class__ = cls  # F841
+
+
+# OK, the `__class__` cell is nonlocal and declared as such.
+class NonlocalDunderClass:
+    def foo():
+        nonlocal __class__
+        __class__ = 1

crates/ruff_linter/resources/test/fixtures/pylint/bidirectional_unicode.py

@@ -4,6 +4,9 @@ print("שלום‬")
 # E2502
 example = "x‏" * 100  #    "‏x" is assigned
 
+# E2502
+another = "x؜" * 50  #    "؜x" is assigned
+
 # E2502
 if access_level != "none‮⁦":  # Check if admin ⁩⁦' and access_level != 'user
     print("You are an admin.")

crates/ruff_linter/resources/test/fixtures/pylint/nonlocal_without_binding.py

@@ -44,3 +44,8 @@ def f():
     def g():
         nonlocal x
         x = 2
+
+# OK
+class A:
+    def method(self):
+        nonlocal __class__

crates/ruff_linter/resources/test/fixtures/pyupgrade/UP008.py

@@ -141,3 +141,133 @@ class ExampleWithKeywords:
     
     def method3(self):
         super(ExampleWithKeywords, self).some_method()  # Should be fixed - no keywords
+
+# See: https://github.com/astral-sh/ruff/issues/19357
+# Must be detected
+class ParentD:
+    def f(self):
+        print("D")
+
+class ChildD1(ParentD):
+    def f(self):
+        if False: __class__ # Python injects __class__ into scope
+        builtins.super(ChildD1, self).f()
+
+class ChildD2(ParentD):
+    def f(self):
+        if False: super # Python injects __class__ into scope
+        builtins.super(ChildD2, self).f()
+
+class ChildD3(ParentD):
+    def f(self):
+        builtins.super(ChildD3, self).f()
+        super # Python injects __class__ into scope
+
+import builtins as builtins_alias
+class ChildD4(ParentD):
+    def f(self):
+        builtins_alias.super(ChildD4, self).f()
+        super # Python injects __class__ into scope
+
+class ChildD5(ParentD):
+    def f(self):
+        super = 1
+        super # Python injects __class__ into scope
+        builtins.super(ChildD5, self).f()
+
+class ChildD6(ParentD):
+    def f(self):
+        super: "Any"
+        __class__ # Python injects __class__ into scope
+        builtins.super(ChildD6, self).f()
+
+class ChildD7(ParentD):
+    def f(self):
+        def x():
+            __class__ # Python injects __class__ into scope
+        builtins.super(ChildD7, self).f()
+
+class ChildD8(ParentD):
+    def f(self):
+        def x():
+            super = 1
+        super # Python injects __class__ into scope
+        builtins.super(ChildD8, self).f()
+
+class ChildD9(ParentD):
+    def f(self):
+        def x():
+            __class__ = 1
+        __class__ # Python injects __class__ into scope
+        builtins.super(ChildD9, self).f()
+
+class ChildD10(ParentD):
+    def f(self):
+        def x():
+            __class__ = 1
+        super # Python injects __class__ into scope
+        builtins.super(ChildD10, self).f()
+
+
+# Must be ignored
+class ParentI:
+    def f(self):
+        print("I")
+
+class ChildI1(ParentI):
+    def f(self):
+        builtins.super(ChildI1, self).f() # no __class__ in the local scope
+
+
+class ChildI2(ParentI):
+    def b(self):
+        x = __class__
+        if False: super
+
+    def f(self):
+        self.b()
+        builtins.super(ChildI2, self).f() # no __class__ in the local scope
+
+class ChildI3(ParentI):
+    def f(self):
+        if False: super
+        def x(_):
+            builtins.super(ChildI3, self).f() # no __class__ in the local scope
+        x(None)
+
+class ChildI4(ParentI):
+    def f(self):
+        super: "str"
+        builtins.super(ChildI4, self).f() # no __class__ in the local scope
+
+class ChildI5(ParentI):
+    def f(self):
+        super = 1
+        __class__ = 3
+        builtins.super(ChildI5, self).f() # no __class__ in the local scope
+
+class ChildI6(ParentI):
+    def f(self):
+        __class__ = None
+        __class__
+        builtins.super(ChildI6, self).f() # no __class__ in the local scope
+
+class ChildI7(ParentI):
+    def f(self):
+        __class__ = None
+        super
+        builtins.super(ChildI7, self).f()
+
+class ChildI8(ParentI):
+    def f(self):
+        __class__: "Any"
+        super
+        builtins.super(ChildI8, self).f()
+
+class ChildI9(ParentI):
+    def f(self):
+        class A:
+            def foo(self):
+                if False: super
+                if False: __class__
+        builtins.super(ChildI9, self).f()

crates/ruff_linter/resources/test/fixtures/pyupgrade/UP043.pyi

@@ -0,0 +1,59 @@
+from collections.abc import Generator, AsyncGenerator
+
+
+def func() -> Generator[int, None, None]:
+    yield 42
+
+
+def func() -> Generator[int, None]:
+    yield 42
+
+
+def func() -> Generator[int]:
+    yield 42
+
+
+def func() -> Generator[int, int, int]:
+    foo = yield 42
+    return foo
+
+
+def func() -> Generator[int, int, None]:
+    _ = yield 42
+    return None
+
+
+def func() -> Generator[int, None, int]:
+    yield 42
+    return 42
+
+
+async def func() -> AsyncGenerator[int, None]:
+    yield 42
+
+
+async def func() -> AsyncGenerator[int]:
+    yield 42
+
+
+async def func() -> AsyncGenerator[int, int]:
+    foo = yield 42
+    return foo
+
+
+from typing import Generator, AsyncGenerator
+
+
+def func() -> Generator[str, None, None]:
+    yield "hello"
+
+
+async def func() -> AsyncGenerator[str, None]:
+    yield "hello"
+
+
+async def func() -> AsyncGenerator[  # type: ignore
+    str,
+    None
+]:
+    yield "hello"

crates/ruff_linter/resources/test/fixtures/ruff/RUF033.py

@@ -124,3 +124,19 @@ def fun_with_python_syntax():
             ...
 
     return Foo
+
+
+@dataclass
+class C:
+    def __post_init__(self, x: tuple[int, ...] = (
+        1,
+        2,
+    )) -> None:
+        self.x = x
+
+
+@dataclass
+class D:
+    def __post_init__(self, x: int = """
+    """) -> None:
+        self.x = x

crates/ruff_linter/resources/test/fixtures/ruff/RUF037.py

@@ -107,3 +107,12 @@ deque(f"{x}" "")  # OK
 deque(t"")
 deque(t""  t"")
 deque(t"{""}") # OK
+
+# https://github.com/astral-sh/ruff/issues/20050
+deque(f"{""}")  # RUF037
+
+deque(f"{b""}")
+deque(f"{""=}")
+deque(f"{""!a}")
+deque(f"{""!r}")
+deque(f"{"":1}")

crates/ruff_linter/resources/test/fixtures/ruff/RUF060.py

@@ -42,3 +42,7 @@ b"a" in bytes("a", "utf-8")
 1 in set(set([1]))
 '' in {""}
 frozenset() in {frozenset()}
+
+# https://github.com/astral-sh/ruff/issues/20238
+"b" in f"" "" # Error
+"b" in f"" "x" # OK

crates/ruff_linter/resources/test/fixtures/syntax_errors/yield_from_in_async_function.py

@@ -0,0 +1 @@
+async def f(): yield from x # error

crates/ruff_linter/src/checkers/ast/analyze/expression.rs

@@ -8,7 +8,7 @@ use ruff_text_size::Ranged;
 
 use crate::checkers::ast::Checker;
 use crate::preview::{
-    is_assert_raises_exception_call_enabled, is_optional_as_none_in_union_enabled,
+    is_optional_as_none_in_union_enabled, is_unnecessary_default_type_args_stubs_enabled,
 };
 use crate::registry::Rule;
 use crate::rules::{
@@ -142,7 +142,10 @@ pub(crate) fn expression(expr: &Expr, checker: &Checker) {
             }
 
             if checker.is_rule_enabled(Rule::UnnecessaryDefaultTypeArgs) {
-                if checker.target_version() >= PythonVersion::PY313 {
+                if checker.target_version() >= PythonVersion::PY313
+                    || is_unnecessary_default_type_args_stubs_enabled(checker.settings())
+                        && checker.semantic().in_stub_file()
+                {
                     pyupgrade::rules::unnecessary_default_type_args(checker, expr);
                 }
             }
@@ -660,6 +663,9 @@ pub(crate) fn expression(expr: &Expr, checker: &Checker) {
             if checker.is_rule_enabled(Rule::BlockingHttpCallInAsyncFunction) {
                 flake8_async::rules::blocking_http_call(checker, call);
             }
+            if checker.is_rule_enabled(Rule::BlockingHttpCallHttpxInAsyncFunction) {
+                flake8_async::rules::blocking_http_call_httpx(checker, call);
+            }
             if checker.is_rule_enabled(Rule::BlockingOpenCallInAsyncFunction) {
                 flake8_async::rules::blocking_open_call(checker, call);
             }
@@ -670,6 +676,9 @@ pub(crate) fn expression(expr: &Expr, checker: &Checker) {
             ]) {
                 flake8_async::rules::blocking_process_invocation(checker, call);
             }
+            if checker.is_rule_enabled(Rule::BlockingInputInAsyncFunction) {
+                flake8_async::rules::blocking_input(checker, call);
+            }
             if checker.is_rule_enabled(Rule::BlockingSleepInAsyncFunction) {
                 flake8_async::rules::blocking_sleep(checker, call);
             }
@@ -1046,7 +1055,6 @@ pub(crate) fn expression(expr: &Expr, checker: &Checker) {
                 Rule::PyPath,
                 Rule::Glob,
                 Rule::OsListdir,
-                Rule::OsSymlink,
             ]) {
                 flake8_use_pathlib::rules::replaceable_by_pathlib(checker, call);
             }
@@ -1287,9 +1295,7 @@ pub(crate) fn expression(expr: &Expr, checker: &Checker) {
             if checker.is_rule_enabled(Rule::NonOctalPermissions) {
                 ruff::rules::non_octal_permissions(checker, call);
             }
-            if checker.is_rule_enabled(Rule::AssertRaisesException)
-                && is_assert_raises_exception_call_enabled(checker.settings())
-            {
+            if checker.is_rule_enabled(Rule::AssertRaisesException) {
                 flake8_bugbear::rules::assert_raises_exception_call(checker, call);
             }
         }
@@ -1314,13 +1320,10 @@ pub(crate) fn expression(expr: &Expr, checker: &Checker) {
                 pylint::rules::yield_in_init(checker, expr);
             }
         }
-        Expr::YieldFrom(yield_from) => {
+        Expr::YieldFrom(_) => {
             if checker.is_rule_enabled(Rule::YieldInInit) {
                 pylint::rules::yield_in_init(checker, expr);
             }
-            if checker.is_rule_enabled(Rule::YieldFromInAsyncFunction) {
-                pylint::rules::yield_from_in_async_function(checker, yield_from);
-            }
         }
         Expr::FString(f_string_expr @ ast::ExprFString { value, .. }) => {
             if checker.is_rule_enabled(Rule::FStringMissingPlaceholders) {

crates/ruff_linter/src/checkers/ast/mod.rs

@@ -71,7 +71,9 @@ use crate::registry::Rule;
 use crate::rules::pyflakes::rules::{
     LateFutureImport, ReturnOutsideFunction, YieldOutsideFunction,
 };
-use crate::rules::pylint::rules::{AwaitOutsideAsync, LoadBeforeGlobalDeclaration};
+use crate::rules::pylint::rules::{
+    AwaitOutsideAsync, LoadBeforeGlobalDeclaration, YieldFromInAsyncFunction,
+};
 use crate::rules::{flake8_pyi, flake8_type_checking, pyflakes, pyupgrade};
 use crate::settings::rule_table::RuleTable;
 use crate::settings::{LinterSettings, TargetVersion, flags};
@@ -668,6 +670,12 @@ impl SemanticSyntaxContext for Checker<'_> {
                     self.report_diagnostic(AwaitOutsideAsync, error.range);
                 }
             }
+            SemanticSyntaxErrorKind::YieldFromInAsyncFunction => {
+                // PLE1700
+                if self.is_rule_enabled(Rule::YieldFromInAsyncFunction) {
+                    self.report_diagnostic(YieldFromInAsyncFunction, error.range);
+                }
+            }
             SemanticSyntaxErrorKind::ReboundComprehensionVariable
             | SemanticSyntaxErrorKind::DuplicateTypeParameter
             | SemanticSyntaxErrorKind::MultipleCaseAssignment(_)
@@ -703,7 +711,10 @@ impl SemanticSyntaxContext for Checker<'_> {
             match scope.kind {
                 ScopeKind::Class(_) | ScopeKind::Lambda(_) => return false,
                 ScopeKind::Function(ast::StmtFunctionDef { is_async, .. }) => return *is_async,
-                ScopeKind::Generator { .. } | ScopeKind::Module | ScopeKind::Type => {}
+                ScopeKind::Generator { .. }
+                | ScopeKind::Module
+                | ScopeKind::Type
+                | ScopeKind::DunderClassCell => {}
             }
         }
         false
@@ -714,7 +725,10 @@ impl SemanticSyntaxContext for Checker<'_> {
             match scope.kind {
                 ScopeKind::Class(_) => return false,
                 ScopeKind::Function(_) | ScopeKind::Lambda(_) => return true,
-                ScopeKind::Generator { .. } | ScopeKind::Module | ScopeKind::Type => {}
+                ScopeKind::Generator { .. }
+                | ScopeKind::Module
+                | ScopeKind::Type
+                | ScopeKind::DunderClassCell => {}
             }
         }
         false
@@ -725,7 +739,7 @@ impl SemanticSyntaxContext for Checker<'_> {
             match scope.kind {
                 ScopeKind::Class(_) | ScopeKind::Generator { .. } => return false,
                 ScopeKind::Function(_) | ScopeKind::Lambda(_) => return true,
-                ScopeKind::Module | ScopeKind::Type => {}
+                ScopeKind::Module | ScopeKind::Type | ScopeKind::DunderClassCell => {}
             }
         }
         false
@@ -1092,6 +1106,24 @@ impl<'a> Visitor<'a> for Checker<'a> {
                     }
                 }
 
+                // Here we add the implicit scope surrounding a method which allows code in the
+                // method to access `__class__` at runtime. See the `ScopeKind::DunderClassCell`
+                // docs for more information.
+                let added_dunder_class_scope = if self.semantic.current_scope().kind.is_class() {
+                    self.semantic.push_scope(ScopeKind::DunderClassCell);
+                    let binding_id = self.semantic.push_binding(
+                        TextRange::default(),
+                        BindingKind::DunderClassCell,
+                        BindingFlags::empty(),
+                    );
+                    self.semantic
+                        .current_scope_mut()
+                        .add("__class__", binding_id);
+                    true
+                } else {
+                    false
+                };
+
                 self.semantic.push_scope(ScopeKind::Type);
 
                 if let Some(type_params) = type_params {
@@ -1155,6 +1187,9 @@ impl<'a> Visitor<'a> for Checker<'a> {
                 self.semantic.pop_scope(); // Function scope
                 self.semantic.pop_definition();
                 self.semantic.pop_scope(); // Type parameter scope
+                if added_dunder_class_scope {
+                    self.semantic.pop_scope(); // `__class__` cell closure scope
+                }
                 self.add_binding(
                     name,
                     stmt.identifier(),

crates/ruff_linter/src/codes.rs

@@ -334,12 +334,14 @@ pub fn code_to_rule(linter: Linter, code: &str) -> Option<(RuleGroup, Rule)> {
         (Flake8Async, "109") => (RuleGroup::Stable, rules::flake8_async::rules::AsyncFunctionWithTimeout),
         (Flake8Async, "110") => (RuleGroup::Stable, rules::flake8_async::rules::AsyncBusyWait),
         (Flake8Async, "115") => (RuleGroup::Stable, rules::flake8_async::rules::AsyncZeroSleep),
-        (Flake8Async, "116") => (RuleGroup::Preview, rules::flake8_async::rules::LongSleepNotForever),
+        (Flake8Async, "116") => (RuleGroup::Stable, rules::flake8_async::rules::LongSleepNotForever),
         (Flake8Async, "210") => (RuleGroup::Stable, rules::flake8_async::rules::BlockingHttpCallInAsyncFunction),
+        (Flake8Async, "212") => (RuleGroup::Preview, rules::flake8_async::rules::BlockingHttpCallHttpxInAsyncFunction),
         (Flake8Async, "220") => (RuleGroup::Stable, rules::flake8_async::rules::CreateSubprocessInAsyncFunction),
         (Flake8Async, "221") => (RuleGroup::Stable, rules::flake8_async::rules::RunProcessInAsyncFunction),
         (Flake8Async, "222") => (RuleGroup::Stable, rules::flake8_async::rules::WaitForProcessInAsyncFunction),
         (Flake8Async, "230") => (RuleGroup::Stable, rules::flake8_async::rules::BlockingOpenCallInAsyncFunction),
+        (Flake8Async, "250") => (RuleGroup::Preview, rules::flake8_async::rules::BlockingInputInAsyncFunction),
         (Flake8Async, "251") => (RuleGroup::Stable, rules::flake8_async::rules::BlockingSleepInAsyncFunction),
 
         // flake8-builtins
@@ -561,7 +563,7 @@ pub fn code_to_rule(linter: Linter, code: &str) -> Option<(RuleGroup, Rule)> {
         (Pyupgrade, "035") => (RuleGroup::Stable, rules::pyupgrade::rules::DeprecatedImport),
         (Pyupgrade, "036") => (RuleGroup::Stable, rules::pyupgrade::rules::OutdatedVersionBlock),
         (Pyupgrade, "037") => (RuleGroup::Stable, rules::pyupgrade::rules::QuotedAnnotation),
-        (Pyupgrade, "038") => (RuleGroup::Deprecated, rules::pyupgrade::rules::NonPEP604Isinstance),
+        (Pyupgrade, "038") => (RuleGroup::Removed, rules::pyupgrade::rules::NonPEP604Isinstance),
         (Pyupgrade, "039") => (RuleGroup::Stable, rules::pyupgrade::rules::UnnecessaryClassParentheses),
         (Pyupgrade, "040") => (RuleGroup::Stable, rules::pyupgrade::rules::NonPEP695TypeAlias),
         (Pyupgrade, "041") => (RuleGroup::Stable, rules::pyupgrade::rules::TimeoutErrorAlias),
@@ -572,7 +574,7 @@ pub fn code_to_rule(linter: Linter, code: &str) -> Option<(RuleGroup, Rule)> {
         (Pyupgrade, "046") => (RuleGroup::Stable, rules::pyupgrade::rules::NonPEP695GenericClass),
         (Pyupgrade, "047") => (RuleGroup::Stable, rules::pyupgrade::rules::NonPEP695GenericFunction),
         (Pyupgrade, "049") => (RuleGroup::Stable, rules::pyupgrade::rules::PrivateTypeParameter),
-        (Pyupgrade, "050") => (RuleGroup::Preview, rules::pyupgrade::rules::UselessClassMetaclassType),
+        (Pyupgrade, "050") => (RuleGroup::Stable, rules::pyupgrade::rules::UselessClassMetaclassType),
 
         // pydocstyle
         (Pydocstyle, "100") => (RuleGroup::Stable, rules::pydocstyle::rules::UndocumentedPublicModule),
@@ -771,7 +773,7 @@ pub fn code_to_rule(linter: Linter, code: &str) -> Option<(RuleGroup, Rule)> {
         (PandasVet, "013") => (RuleGroup::Stable, rules::pandas_vet::rules::PandasUseOfDotStack),
         (PandasVet, "015") => (RuleGroup::Stable, rules::pandas_vet::rules::PandasUseOfPdMerge),
         (PandasVet, "101") => (RuleGroup::Stable, rules::pandas_vet::rules::PandasNuniqueConstantSeriesCheck),
-        (PandasVet, "901") => (RuleGroup::Deprecated, rules::pandas_vet::rules::PandasDfVariableName),
+        (PandasVet, "901") => (RuleGroup::Removed, rules::pandas_vet::rules::PandasDfVariableName),
 
         // flake8-errmsg
         (Flake8ErrMsg, "101") => (RuleGroup::Stable, rules::flake8_errmsg::rules::RawStringInException),
@@ -828,8 +830,8 @@ pub fn code_to_rule(linter: Linter, code: &str) -> Option<(RuleGroup, Rule)> {
         (Flake8Pyi, "056") => (RuleGroup::Stable, rules::flake8_pyi::rules::UnsupportedMethodCallOnAll),
         (Flake8Pyi, "058") => (RuleGroup::Stable, rules::flake8_pyi::rules::GeneratorReturnFromIterMethod),
         (Flake8Pyi, "057") => (RuleGroup::Stable, rules::flake8_pyi::rules::ByteStringUsage),
-        (Flake8Pyi, "059") => (RuleGroup::Preview, rules::flake8_pyi::rules::GenericNotLastBaseClass),
-        (Flake8Pyi, "061") => (RuleGroup::Preview, rules::flake8_pyi::rules::RedundantNoneLiteral),
+        (Flake8Pyi, "059") => (RuleGroup::Stable, rules::flake8_pyi::rules::GenericNotLastBaseClass),
+        (Flake8Pyi, "061") => (RuleGroup::Stable, rules::flake8_pyi::rules::RedundantNoneLiteral),
         (Flake8Pyi, "062") => (RuleGroup::Stable, rules::flake8_pyi::rules::DuplicateLiteralMember),
         (Flake8Pyi, "063") => (RuleGroup::Stable, rules::flake8_pyi::rules::Pep484StylePositionalOnlyParameter),
         (Flake8Pyi, "064") => (RuleGroup::Stable, rules::flake8_pyi::rules::RedundantFinalLiteral),
@@ -954,7 +956,7 @@ pub fn code_to_rule(linter: Linter, code: &str) -> Option<(RuleGroup, Rule)> {
         (Flake8UsePathlib, "207") => (RuleGroup::Stable, rules::flake8_use_pathlib::rules::Glob),
         (Flake8UsePathlib, "208") => (RuleGroup::Stable, rules::flake8_use_pathlib::violations::OsListdir),
         (Flake8UsePathlib, "210") => (RuleGroup::Stable, rules::flake8_use_pathlib::rules::InvalidPathlibWithSuffix),
-        (Flake8UsePathlib, "211") => (RuleGroup::Preview, rules::flake8_use_pathlib::rules::OsSymlink),
+        (Flake8UsePathlib, "211") => (RuleGroup::Stable, rules::flake8_use_pathlib::rules::OsSymlink),
 
         // flake8-logging-format
         (Flake8LoggingFormat, "001") => (RuleGroup::Stable, rules::flake8_logging_format::violations::LoggingStringFormat),
@@ -1030,7 +1032,7 @@ pub fn code_to_rule(linter: Linter, code: &str) -> Option<(RuleGroup, Rule)> {
         (Ruff, "039") => (RuleGroup::Preview, rules::ruff::rules::UnrawRePattern),
         (Ruff, "040") => (RuleGroup::Stable, rules::ruff::rules::InvalidAssertMessageLiteralArgument),
         (Ruff, "041") => (RuleGroup::Stable, rules::ruff::rules::UnnecessaryNestedLiteral),
-        (Ruff, "043") => (RuleGroup::Preview, rules::ruff::rules::PytestRaisesAmbiguousPattern),
+        (Ruff, "043") => (RuleGroup::Stable, rules::ruff::rules::PytestRaisesAmbiguousPattern),
         (Ruff, "045") => (RuleGroup::Preview, rules::ruff::rules::ImplicitClassVarInDataclass),
         (Ruff, "046") => (RuleGroup::Stable, rules::ruff::rules::UnnecessaryCastToInt),
         (Ruff, "047") => (RuleGroup::Preview, rules::ruff::rules::NeedlessElse),
@@ -1044,7 +1046,7 @@ pub fn code_to_rule(linter: Linter, code: &str) -> Option<(RuleGroup, Rule)> {
         (Ruff, "056") => (RuleGroup::Preview, rules::ruff::rules::FalsyDictGetFallback),
         (Ruff, "057") => (RuleGroup::Stable, rules::ruff::rules::UnnecessaryRound),
         (Ruff, "058") => (RuleGroup::Stable, rules::ruff::rules::StarmapZip),
-        (Ruff, "059") => (RuleGroup::Preview, rules::ruff::rules::UnusedUnpackedVariable),
+        (Ruff, "059") => (RuleGroup::Stable, rules::ruff::rules::UnusedUnpackedVariable),
         (Ruff, "060") => (RuleGroup::Preview, rules::ruff::rules::InEmptyCollection),
         (Ruff, "061") => (RuleGroup::Preview, rules::ruff::rules::LegacyFormPytestRaises),
         (Ruff, "063") => (RuleGroup::Preview, rules::ruff::rules::AccessAnnotationsFromClassDict),
@@ -1104,11 +1106,11 @@ pub fn code_to_rule(linter: Linter, code: &str) -> Option<(RuleGroup, Rule)> {
 
         // airflow
         (Airflow, "001") => (RuleGroup::Stable, rules::airflow::rules::AirflowVariableNameTaskIdMismatch),
-        (Airflow, "002") => (RuleGroup::Preview, rules::airflow::rules::AirflowDagNoScheduleArgument),
-        (Airflow, "301") => (RuleGroup::Preview, rules::airflow::rules::Airflow3Removal),
-        (Airflow, "302") => (RuleGroup::Preview, rules::airflow::rules::Airflow3MovedToProvider),
-        (Airflow, "311") => (RuleGroup::Preview, rules::airflow::rules::Airflow3SuggestedUpdate),
-        (Airflow, "312") => (RuleGroup::Preview, rules::airflow::rules::Airflow3SuggestedToMoveToProvider),
+        (Airflow, "002") => (RuleGroup::Stable, rules::airflow::rules::AirflowDagNoScheduleArgument),
+        (Airflow, "301") => (RuleGroup::Stable, rules::airflow::rules::Airflow3Removal),
+        (Airflow, "302") => (RuleGroup::Stable, rules::airflow::rules::Airflow3MovedToProvider),
+        (Airflow, "311") => (RuleGroup::Stable, rules::airflow::rules::Airflow3SuggestedUpdate),
+        (Airflow, "312") => (RuleGroup::Stable, rules::airflow::rules::Airflow3SuggestedToMoveToProvider),
 
         // perflint
         (Perflint, "101") => (RuleGroup::Stable, rules::perflint::rules::UnnecessaryListCast),
@@ -1135,7 +1137,7 @@ pub fn code_to_rule(linter: Linter, code: &str) -> Option<(RuleGroup, Rule)> {
         (Refurb, "105") => (RuleGroup::Stable, rules::refurb::rules::PrintEmptyString),
         (Refurb, "110") => (RuleGroup::Preview, rules::refurb::rules::IfExpInsteadOfOrOperator),
         (Refurb, "113") => (RuleGroup::Preview, rules::refurb::rules::RepeatedAppend),
-        (Refurb, "116") => (RuleGroup::Preview, rules::refurb::rules::FStringNumberFormat),
+        (Refurb, "116") => (RuleGroup::Stable, rules::refurb::rules::FStringNumberFormat),
         (Refurb, "118") => (RuleGroup::Preview, rules::refurb::rules::ReimplementedOperator),
         (Refurb, "122") => (RuleGroup::Stable, rules::refurb::rules::ForLoopWrites),
         (Refurb, "129") => (RuleGroup::Stable, rules::refurb::rules::ReadlinesInFor),

crates/ruff_linter/src/fs.rs

@@ -58,13 +58,3 @@ pub fn relativize_path<P: AsRef<Path>>(path: P) -> String {
     }
     format!("{}", path.display())
 }
-
-/// Convert an absolute path to be relative to the specified project root.
-pub fn relativize_path_to<P: AsRef<Path>, R: AsRef<Path>>(path: P, project_root: R) -> String {
-    format!(
-        "{}",
-        pathdiff::diff_paths(&path, project_root)
-            .expect("Could not diff paths")
-            .display()
-    )
-}

crates/ruff_linter/src/linter.rs

@@ -1231,6 +1231,10 @@ mod tests {
     )]
     #[test_case(Rule::AwaitOutsideAsync, Path::new("await_outside_async_function.py"))]
     #[test_case(Rule::AwaitOutsideAsync, Path::new("async_comprehension.py"))]
+    #[test_case(
+        Rule::YieldFromInAsyncFunction,
+        Path::new("yield_from_in_async_function.py")
+    )]
     fn test_syntax_errors(rule: Rule, path: &Path) -> Result<()> {
         let snapshot = path.to_string_lossy().to_string();
         let path = Path::new("resources/test/fixtures/syntax_errors").join(path);

crates/ruff_linter/src/message/github.rs

@@ -19,7 +19,7 @@ impl Emitter for GithubEmitter {
         context: &EmitterContext,
     ) -> anyhow::Result<()> {
         for diagnostic in diagnostics {
-            let source_location = diagnostic.expect_ruff_start_location();
+            let source_location = diagnostic.ruff_start_location().unwrap_or_default();
             let filename = diagnostic.expect_ruff_filename();
             let location = if context.is_notebook(&filename) {
                 // We can't give a reasonable location for the structured formats,
@@ -29,7 +29,7 @@ impl Emitter for GithubEmitter {
                 source_location
             };
 
-            let end_location = diagnostic.expect_ruff_end_location();
+            let end_location = diagnostic.ruff_end_location().unwrap_or_default();
 
             write!(
                 writer,

crates/ruff_linter/src/message/gitlab.rs

@@ -1,174 +0,0 @@
-use std::collections::HashSet;
-use std::collections::hash_map::DefaultHasher;
-use std::hash::{Hash, Hasher};
-use std::io::Write;
-
-use serde::ser::SerializeSeq;
-use serde::{Serialize, Serializer};
-use serde_json::json;
-
-use ruff_db::diagnostic::Diagnostic;
-
-use crate::fs::{relativize_path, relativize_path_to};
-use crate::message::{Emitter, EmitterContext};
-
-/// Generate JSON with violations in GitLab CI format
-//  https://docs.gitlab.com/ee/ci/testing/code_quality.html#implement-a-custom-tool
-pub struct GitlabEmitter {
-    project_dir: Option<String>,
-}
-
-impl Default for GitlabEmitter {
-    fn default() -> Self {
-        Self {
-            project_dir: std::env::var("CI_PROJECT_DIR").ok(),
-        }
-    }
-}
-
-impl Emitter for GitlabEmitter {
-    fn emit(
-        &mut self,
-        writer: &mut dyn Write,
-        diagnostics: &[Diagnostic],
-        context: &EmitterContext,
-    ) -> anyhow::Result<()> {
-        serde_json::to_writer_pretty(
-            writer,
-            &SerializedMessages {
-                diagnostics,
-                context,
-                project_dir: self.project_dir.as_deref(),
-            },
-        )?;
-
-        Ok(())
-    }
-}
-
-struct SerializedMessages<'a> {
-    diagnostics: &'a [Diagnostic],
-    context: &'a EmitterContext<'a>,
-    project_dir: Option<&'a str>,
-}
-
-impl Serialize for SerializedMessages<'_> {
-    fn serialize<S>(&self, serializer: S) -> Result<S::Ok, S::Error>
-    where
-        S: Serializer,
-    {
-        let mut s = serializer.serialize_seq(Some(self.diagnostics.len()))?;
-        let mut fingerprints = HashSet::<u64>::with_capacity(self.diagnostics.len());
-
-        for diagnostic in self.diagnostics {
-            let filename = diagnostic.expect_ruff_filename();
-
-            let (start_location, end_location) = if self.context.is_notebook(&filename) {
-                // We can't give a reasonable location for the structured formats,
-                // so we show one that's clearly a fallback
-                Default::default()
-            } else {
-                (
-                    diagnostic.expect_ruff_start_location(),
-                    diagnostic.expect_ruff_end_location(),
-                )
-            };
-
-            let path = self.project_dir.as_ref().map_or_else(
-                || relativize_path(&filename),
-                |project_dir| relativize_path_to(&filename, project_dir),
-            );
-
-            let mut message_fingerprint = fingerprint(diagnostic, &path, 0);
-
-            // Make sure that we do not get a fingerprint that is already in use
-            // by adding in the previously generated one.
-            while fingerprints.contains(&message_fingerprint) {
-                message_fingerprint = fingerprint(diagnostic, &path, message_fingerprint);
-            }
-            fingerprints.insert(message_fingerprint);
-
-            let description = diagnostic.body();
-            let check_name = diagnostic.secondary_code_or_id();
-
-            let value = json!({
-                "check_name": check_name,
-                // GitLab doesn't display the separate `check_name` field in a Code Quality report,
-                // so prepend it to the description too.
-                "description": format!("{check_name}: {description}"),
-                "severity": "major",
-                "fingerprint": format!("{:x}", message_fingerprint),
-                "location": {
-                    "path": path,
-                    "positions": {
-                        "begin": start_location,
-                        "end": end_location,
-                    },
-                },
-            });
-
-            s.serialize_element(&value)?;
-        }
-
-        s.end()
-    }
-}
-
-/// Generate a unique fingerprint to identify a violation.
-fn fingerprint(message: &Diagnostic, project_path: &str, salt: u64) -> u64 {
-    let mut hasher = DefaultHasher::new();
-
-    salt.hash(&mut hasher);
-    message.name().hash(&mut hasher);
-    project_path.hash(&mut hasher);
-
-    hasher.finish()
-}
-
-#[cfg(test)]
-mod tests {
-    use insta::assert_snapshot;
-
-    use crate::message::GitlabEmitter;
-    use crate::message::tests::{
-        capture_emitter_output, create_diagnostics, create_syntax_error_diagnostics,
-    };
-
-    #[test]
-    fn output() {
-        let mut emitter = GitlabEmitter::default();
-        let content = capture_emitter_output(&mut emitter, &create_diagnostics());
-
-        assert_snapshot!(redact_fingerprint(&content));
-    }
-
-    #[test]
-    fn syntax_errors() {
-        let mut emitter = GitlabEmitter::default();
-        let content = capture_emitter_output(&mut emitter, &create_syntax_error_diagnostics());
-
-        assert_snapshot!(redact_fingerprint(&content));
-    }
-
-    // Redact the fingerprint because the default hasher isn't stable across platforms.
-    fn redact_fingerprint(content: &str) -> String {
-        static FINGERPRINT_HAY_KEY: &str = r#""fingerprint": ""#;
-
-        let mut output = String::with_capacity(content.len());
-        let mut last = 0;
-
-        for (start, _) in content.match_indices(FINGERPRINT_HAY_KEY) {
-            let fingerprint_hash_start = start + FINGERPRINT_HAY_KEY.len();
-            output.push_str(&content[last..fingerprint_hash_start]);
-            output.push_str("<redacted>");
-            last = fingerprint_hash_start
-                + content[fingerprint_hash_start..]
-                    .find('"')
-                    .expect("Expected terminating quote");
-        }
-
-        output.push_str(&content[last..]);
-
-        output
-    }
-}

crates/ruff_linter/src/message/grouped.rs

@@ -105,7 +105,7 @@ fn group_diagnostics_by_filename(
             .or_insert_with(Vec::new)
             .push(MessageWithLocation {
                 message: diagnostic,
-                start_location: diagnostic.expect_ruff_start_location(),
+                start_location: diagnostic.ruff_start_location().unwrap_or_default(),
             });
     }
     grouped_messages

crates/ruff_linter/src/message/mod.rs

@@ -10,7 +10,6 @@ use ruff_db::diagnostic::{
 use ruff_db::files::File;
 
 pub use github::GithubEmitter;
-pub use gitlab::GitlabEmitter;
 pub use grouped::GroupedEmitter;
 use ruff_notebook::NotebookIndex;
 use ruff_source_file::SourceFile;
@@ -22,7 +21,6 @@ use crate::Fix;
 use crate::registry::Rule;
 
 mod github;
-mod gitlab;
 mod grouped;
 mod sarif;
 mod text;

crates/ruff_linter/src/message/sarif.rs

@@ -158,8 +158,8 @@ struct SarifResult<'a> {
 impl<'a> SarifResult<'a> {
     #[cfg(not(target_arch = "wasm32"))]
     fn from_message(message: &'a Diagnostic) -> Result<Self> {
-        let start_location = message.expect_ruff_start_location();
-        let end_location = message.expect_ruff_end_location();
+        let start_location = message.ruff_start_location().unwrap_or_default();
+        let end_location = message.ruff_end_location().unwrap_or_default();
         let path = normalize_path(&*message.expect_ruff_filename());
         Ok(Self {
             code: RuleCode::from(message),
@@ -178,8 +178,8 @@ impl<'a> SarifResult<'a> {
     #[cfg(target_arch = "wasm32")]
     #[expect(clippy::unnecessary_wraps)]
     fn from_message(message: &'a Diagnostic) -> Result<Self> {
-        let start_location = message.expect_ruff_start_location();
-        let end_location = message.expect_ruff_end_location();
+        let start_location = message.ruff_start_location().unwrap_or_default();
+        let end_location = message.ruff_end_location().unwrap_or_default();
         let path = normalize_path(&*message.expect_ruff_filename());
         Ok(Self {
             code: RuleCode::from(message),

crates/ruff_linter/src/message/snapshots/ruff_linter__message__sarif__tests__results.snap

@@ -81,7 +81,7 @@ expression: value
           "rules": [
             {
               "fullDescription": {
-                "text": "## What it does\nChecks for unused imports.\n\n## Why is this bad?\nUnused imports add a performance overhead at runtime, and risk creating\nimport cycles. They also increase the cognitive load of reading the code.\n\nIf an import statement is used to check for the availability or existence\nof a module, consider using `importlib.util.find_spec` instead.\n\nIf an import statement is used to re-export a symbol as part of a module's\npublic interface, consider using a \"redundant\" import alias, which\ninstructs Ruff (and other tools) to respect the re-export, and avoid\nmarking it as unused, as in:\n\n```python\nfrom module import member as member\n```\n\nAlternatively, you can use `__all__` to declare a symbol as part of the module's\ninterface, as in:\n\n```python\n# __init__.py\nimport some_module\n\n__all__ = [\"some_module\"]\n```\n\n## Fix safety\n\nFixes to remove unused imports are safe, except in `__init__.py` files.\n\nApplying fixes to `__init__.py` files is currently in preview. The fix offered depends on the\ntype of the unused import. Ruff will suggest a safe fix to export first-party imports with\neither a redundant alias or, if already present in the file, an `__all__` entry. If multiple\n`__all__` declarations are present, Ruff will not offer a fix. Ruff will suggest an unsafe fix\nto remove third-party and standard library imports -- the fix is unsafe because the module's\ninterface changes.\n\n## Example\n\n```python\nimport numpy as np  # unused import\n\n\ndef area(radius):\n    return 3.14 * radius**2\n```\n\nUse instead:\n\n```python\ndef area(radius):\n    return 3.14 * radius**2\n```\n\nTo check the availability of a module, use `importlib.util.find_spec`:\n\n```python\nfrom importlib.util import find_spec\n\nif find_spec(\"numpy\") is not None:\n    print(\"numpy is installed\")\nelse:\n    print(\"numpy is not installed\")\n```\n\n## Preview\nWhen [preview](https://docs.astral.sh/ruff/preview/) is enabled,\nthe criterion for determining whether an import is first-party\nis stricter, which could affect the suggested fix. See [this FAQ section](https://docs.astral.sh/ruff/faq/#how-does-ruff-determine-which-of-my-imports-are-first-party-third-party-etc) for more details.\n\n## Options\n- `lint.ignore-init-module-imports`\n- `lint.pyflakes.allowed-unused-imports`\n\n## References\n- [Python documentation: `import`](https://docs.python.org/3/reference/simple_stmts.html#the-import-statement)\n- [Python documentation: `importlib.util.find_spec`](https://docs.python.org/3/library/importlib.html#importlib.util.find_spec)\n- [Typing documentation: interface conventions](https://typing.python.org/en/latest/spec/distributing.html#library-interface-public-and-private-symbols)\n"
+                "text": "## What it does\nChecks for unused imports.\n\n## Why is this bad?\nUnused imports add a performance overhead at runtime, and risk creating\nimport cycles. They also increase the cognitive load of reading the code.\n\nIf an import statement is used to check for the availability or existence\nof a module, consider using `importlib.util.find_spec` instead.\n\nIf an import statement is used to re-export a symbol as part of a module's\npublic interface, consider using a \"redundant\" import alias, which\ninstructs Ruff (and other tools) to respect the re-export, and avoid\nmarking it as unused, as in:\n\n```python\nfrom module import member as member\n```\n\nAlternatively, you can use `__all__` to declare a symbol as part of the module's\ninterface, as in:\n\n```python\n# __init__.py\nimport some_module\n\n__all__ = [\"some_module\"]\n```\n\n## Fix safety\n\nFixes to remove unused imports are safe, except in `__init__.py` files.\n\nApplying fixes to `__init__.py` files is currently in preview. The fix offered depends on the\ntype of the unused import. Ruff will suggest a safe fix to export first-party imports with\neither a redundant alias or, if already present in the file, an `__all__` entry. If multiple\n`__all__` declarations are present, Ruff will not offer a fix. Ruff will suggest an unsafe fix\nto remove third-party and standard library imports -- the fix is unsafe because the module's\ninterface changes.\n\nSee [this FAQ section](https://docs.astral.sh/ruff/faq/#how-does-ruff-determine-which-of-my-imports-are-first-party-third-party-etc)\nfor more details on how Ruff\ndetermines whether an import is first or third-party.\n\n## Example\n\n```python\nimport numpy as np  # unused import\n\n\ndef area(radius):\n    return 3.14 * radius**2\n```\n\nUse instead:\n\n```python\ndef area(radius):\n    return 3.14 * radius**2\n```\n\nTo check the availability of a module, use `importlib.util.find_spec`:\n\n```python\nfrom importlib.util import find_spec\n\nif find_spec(\"numpy\") is not None:\n    print(\"numpy is installed\")\nelse:\n    print(\"numpy is not installed\")\n```\n\n## Options\n- `lint.ignore-init-module-imports`\n- `lint.pyflakes.allowed-unused-imports`\n\n## References\n- [Python documentation: `import`](https://docs.python.org/3/reference/simple_stmts.html#the-import-statement)\n- [Python documentation: `importlib.util.find_spec`](https://docs.python.org/3/library/importlib.html#importlib.util.find_spec)\n- [Typing documentation: interface conventions](https://typing.python.org/en/latest/spec/distributing.html#library-interface-public-and-private-symbols)\n"
               },
               "help": {
                 "text": "`{name}` imported but unused; consider using `importlib.util.find_spec` to test for availability"
@@ -119,7 +119,7 @@ expression: value
             },
             {
               "fullDescription": {
-                "text": "## What it does\nChecks for the presence of unused variables in function scopes.\n\n## Why is this bad?\nA variable that is defined but not used is likely a mistake, and should\nbe removed to avoid confusion.\n\nIf a variable is intentionally defined-but-not-used, it should be\nprefixed with an underscore, or some other value that adheres to the\n[`lint.dummy-variable-rgx`] pattern.\n\n## Example\n```python\ndef foo():\n    x = 1\n    y = 2\n    return x\n```\n\nUse instead:\n```python\ndef foo():\n    x = 1\n    return x\n```\n\n## Fix safety\n\nThis rule's fix is marked as unsafe because removing an unused variable assignment may\ndelete comments that are attached to the assignment.\n\n## Options\n- `lint.dummy-variable-rgx`\n"
+                "text": "## What it does\nChecks for the presence of unused variables in function scopes.\n\n## Why is this bad?\nA variable that is defined but not used is likely a mistake, and should\nbe removed to avoid confusion.\n\nIf a variable is intentionally defined-but-not-used, it should be\nprefixed with an underscore, or some other value that adheres to the\n[`lint.dummy-variable-rgx`] pattern.\n\n## Example\n```python\ndef foo():\n    x = 1\n    y = 2\n    return x\n```\n\nUse instead:\n```python\ndef foo():\n    x = 1\n    return x\n```\n\n## Fix safety\n\nThis rule's fix is marked as unsafe because removing an unused variable assignment may\ndelete comments that are attached to the assignment.\n\n## See also\n\nThis rule does not apply to bindings in unpacked assignments (e.g. `x, y = 1, 2`). See\n[`unused-unpacked-variable`][RUF059] for this case.\n\n## Options\n- `lint.dummy-variable-rgx`\n\n[RUF059]: https://docs.astral.sh/ruff/rules/unused-unpacked-variable/\n"
               },
               "help": {
                 "text": "Local variable `{name}` is assigned to but never used"

crates/ruff_linter/src/message/text.rs

@@ -3,9 +3,9 @@ use std::io::Write;
 use ruff_db::diagnostic::{
     Diagnostic, DiagnosticFormat, DisplayDiagnosticConfig, DisplayDiagnostics,
 };
+use ruff_diagnostics::Applicability;
 
 use crate::message::{Emitter, EmitterContext};
-use crate::settings::types::UnsafeFixes;
 
 pub struct TextEmitter {
     config: DisplayDiagnosticConfig,
@@ -46,10 +46,8 @@ impl TextEmitter {
     }
 
     #[must_use]
-    pub fn with_unsafe_fixes(mut self, unsafe_fixes: UnsafeFixes) -> Self {
-        self.config = self
-            .config
-            .fix_applicability(unsafe_fixes.required_applicability());
+    pub fn with_fix_applicability(mut self, applicability: Applicability) -> Self {
+        self.config = self.config.fix_applicability(applicability);
         self
     }
 
@@ -86,13 +84,13 @@ impl Emitter for TextEmitter {
 #[cfg(test)]
 mod tests {
     use insta::assert_snapshot;
+    use ruff_diagnostics::Applicability;
 
     use crate::message::TextEmitter;
     use crate::message::tests::{
         capture_emitter_notebook_output, capture_emitter_output, create_diagnostics,
         create_notebook_diagnostics, create_syntax_error_diagnostics,
     };
-    use crate::settings::types::UnsafeFixes;
 
     #[test]
     fn default() {
@@ -117,7 +115,7 @@ mod tests {
         let mut emitter = TextEmitter::default()
             .with_show_fix_status(true)
             .with_show_source(true)
-            .with_unsafe_fixes(UnsafeFixes::Enabled);
+            .with_fix_applicability(Applicability::Unsafe);
         let content = capture_emitter_output(&mut emitter, &create_diagnostics());
 
         assert_snapshot!(content);
@@ -128,7 +126,7 @@ mod tests {
         let mut emitter = TextEmitter::default()
             .with_show_fix_status(true)
             .with_show_source(true)
-            .with_unsafe_fixes(UnsafeFixes::Enabled);
+            .with_fix_applicability(Applicability::Unsafe);
         let (messages, notebook_indexes) = create_notebook_diagnostics();
         let content = capture_emitter_notebook_output(&mut emitter, &messages, &notebook_indexes);
 

crates/ruff_linter/src/preview.rs

@@ -11,11 +11,6 @@ pub(crate) const fn is_py314_support_enabled(settings: &LinterSettings) -> bool
     settings.preview.is_enabled()
 }
 
-// https://github.com/astral-sh/ruff/pull/16565
-pub(crate) const fn is_full_path_match_source_strategy_enabled(settings: &LinterSettings) -> bool {
-    settings.preview.is_enabled()
-}
-
 // Rule-specific behavior
 
 // https://github.com/astral-sh/ruff/pull/15541
@@ -40,6 +35,11 @@ pub(crate) const fn is_bad_version_info_in_non_stub_enabled(settings: &LinterSet
     settings.preview.is_enabled()
 }
 
+/// <https://github.com/astral-sh/ruff/pull/19303>
+pub(crate) const fn is_fix_f_string_logging_enabled(settings: &LinterSettings) -> bool {
+    settings.preview.is_enabled()
+}
+
 // https://github.com/astral-sh/ruff/pull/16719
 pub(crate) const fn is_fix_manual_dict_comprehension_enabled(settings: &LinterSettings) -> bool {
     settings.preview.is_enabled()
@@ -195,35 +195,11 @@ pub(crate) const fn is_allow_nested_roots_enabled(settings: &LinterSettings) ->
     settings.preview.is_enabled()
 }
 
-// https://github.com/astral-sh/ruff/pull/18208
-pub(crate) const fn is_multiple_with_statements_fix_safe_enabled(
-    settings: &LinterSettings,
-) -> bool {
-    settings.preview.is_enabled()
-}
-
-// https://github.com/astral-sh/ruff/pull/18400
-pub(crate) const fn is_ignore_init_files_in_useless_alias_enabled(
-    settings: &LinterSettings,
-) -> bool {
-    settings.preview.is_enabled()
-}
-
 // https://github.com/astral-sh/ruff/pull/18572
 pub(crate) const fn is_optional_as_none_in_union_enabled(settings: &LinterSettings) -> bool {
     settings.preview.is_enabled()
 }
 
-// https://github.com/astral-sh/ruff/pull/18547
-pub(crate) const fn is_invalid_async_mock_access_check_enabled(settings: &LinterSettings) -> bool {
-    settings.preview.is_enabled()
-}
-
-// https://github.com/astral-sh/ruff/pull/18867
-pub(crate) const fn is_raise_exception_byte_string_enabled(settings: &LinterSettings) -> bool {
-    settings.preview.is_enabled()
-}
-
 // https://github.com/astral-sh/ruff/pull/18683
 pub(crate) const fn is_safe_super_call_with_parameters_fix_enabled(
     settings: &LinterSettings,
@@ -231,22 +207,14 @@ pub(crate) const fn is_safe_super_call_with_parameters_fix_enabled(
     settings.preview.is_enabled()
 }
 
-// https://github.com/astral-sh/ruff/pull/19063
-pub(crate) const fn is_assert_raises_exception_call_enabled(settings: &LinterSettings) -> bool {
-    settings.preview.is_enabled()
-}
-
-// https://github.com/astral-sh/ruff/pull/19100
-pub(crate) const fn is_add_future_annotations_imports_enabled(settings: &LinterSettings) -> bool {
-    settings.preview.is_enabled()
-}
-
-// https://github.com/astral-sh/ruff/pull/19390
-pub(crate) const fn is_trailing_comma_type_params_enabled(settings: &LinterSettings) -> bool {
-    settings.preview.is_enabled()
-}
-
 // https://github.com/astral-sh/ruff/pull/19851
 pub(crate) const fn is_maxsplit_without_separator_fix_enabled(settings: &LinterSettings) -> bool {
     settings.preview.is_enabled()
 }
+
+// https://github.com/astral-sh/ruff/pull/20027
+pub(crate) const fn is_unnecessary_default_type_args_stubs_enabled(
+    settings: &LinterSettings,
+) -> bool {
+    settings.preview.is_enabled()
+}

crates/ruff_linter/src/renamer.rs

@@ -354,7 +354,10 @@ impl Renamer {
                 ))
             }
             // Avoid renaming builtins and other "special" bindings.
-            BindingKind::FutureImport | BindingKind::Builtin | BindingKind::Export(_) => None,
+            BindingKind::FutureImport
+            | BindingKind::Builtin
+            | BindingKind::Export(_)
+            | BindingKind::DunderClassCell => None,
             // By default, replace the binding's name with the target name.
             BindingKind::Annotation
             | BindingKind::Argument

crates/ruff_linter/src/rule_selector.rs

@@ -214,10 +214,8 @@ impl RuleSelector {
                 RuleGroup::Preview => {
                     preview_enabled && (self.is_exact() || !preview_require_explicit)
                 }
-                // Deprecated rules are excluded in preview mode and with 'All' option unless explicitly selected
-                RuleGroup::Deprecated => {
-                    (!preview_enabled || self.is_exact()) && !matches!(self, RuleSelector::All)
-                }
+                // Deprecated rules are excluded by default unless explicitly selected
+                RuleGroup::Deprecated => !preview_enabled && self.is_exact(),
                 // Removed rules are included if explicitly selected but will error downstream
                 RuleGroup::Removed => self.is_exact(),
             }

crates/ruff_linter/src/rules/airflow/helpers.rs

@@ -37,7 +37,6 @@ pub(crate) enum Replacement {
 
 #[derive(Clone, Debug, Eq, PartialEq)]
 pub(crate) enum ProviderReplacement {
-    None,
     AutoImport {
         module: &'static str,
         name: &'static str,

crates/ruff_linter/src/rules/airflow/rules/dag_schedule_argument.rs

@@ -46,7 +46,7 @@ pub(crate) struct AirflowDagNoScheduleArgument;
 impl Violation for AirflowDagNoScheduleArgument {
     #[derive_message_formats]
     fn message(&self) -> String {
-        "DAG should have an explicit `schedule` argument".to_string()
+        "`DAG` or `@dag` should have an explicit `schedule` argument".to_string()
     }
 }
 

crates/ruff_linter/src/rules/airflow/rules/moved_to_provider_in_3.rs

@@ -13,13 +13,13 @@ use ruff_text_size::TextRange;
 use crate::{FixAvailability, Violation};
 
 /// ## What it does
-/// Checks for uses of Airflow functions and values that have been moved to it providers.
-/// (e.g., apache-airflow-providers-fab)
+/// Checks for uses of Airflow functions and values that have been moved to its providers
+/// (e.g., `apache-airflow-providers-fab`).
 ///
 /// ## Why is this bad?
 /// Airflow 3.0 moved various deprecated functions, members, and other
 /// values to its providers. The user needs to install the corresponding provider and replace
-/// the original usage with the one in the provider
+/// the original usage with the one in the provider.
 ///
 /// ## Example
 /// ```python
@@ -50,9 +50,6 @@ impl Violation for Airflow3MovedToProvider<'_> {
             replacement,
         } = self;
         match replacement {
-            ProviderReplacement::None => {
-                format!("`{deprecated}` is removed in Airflow 3.0")
-            }
             ProviderReplacement::AutoImport {
                 name: _,
                 module: _,
@@ -85,7 +82,6 @@ impl Violation for Airflow3MovedToProvider<'_> {
                 provider,
                 version,
             } => Some((module, name.as_str(), provider, version)),
-            ProviderReplacement::None => None,
         } {
             Some(format!(
                 "Install `apache-airflow-providers-{provider}>={version}` and use `{name}` from `{module}` instead."
@@ -1020,7 +1016,6 @@ fn check_names_moved_to_provider(checker: &Checker, expr: &Expr, ranged: TextRan
             provider: "postgres",
             version: "1.0.0",
         },
-        ["airflow", "operators", "postgres_operator", "Mapping"] => ProviderReplacement::None,
 
         // apache-airflow-providers-presto
         ["airflow", "hooks", "presto_hook", "PrestoHook"] => ProviderReplacement::AutoImport {
@@ -1209,16 +1204,6 @@ fn check_names_moved_to_provider(checker: &Checker, expr: &Expr, ranged: TextRan
         ProviderReplacement::SourceModuleMovedToProvider { module, name, .. } => {
             (module, name.as_str())
         }
-        ProviderReplacement::None => {
-            checker.report_diagnostic(
-                Airflow3MovedToProvider {
-                    deprecated: qualified_name,
-                    replacement,
-                },
-                ranged,
-            );
-            return;
-        }
     };
 
     if is_guarded_by_try_except(expr, module, name, checker.semantic()) {

crates/ruff_linter/src/rules/airflow/rules/removal_in_3.rs

@@ -23,7 +23,7 @@ use ruff_text_size::TextRange;
 /// ## Why is this bad?
 /// Airflow 3.0 removed various deprecated functions, members, and other
 /// values. Some have more modern replacements. Others are considered too niche
-/// and not worth to be maintained in Airflow.
+/// and not worth continued maintenance in Airflow.
 ///
 /// ## Example
 /// ```python
@@ -704,6 +704,7 @@ fn check_name(checker: &Checker, expr: &Expr, range: TextRange) {
         ["airflow", "operators", "subdag", ..] => {
             Replacement::Message("The whole `airflow.subdag` module has been removed.")
         }
+        ["airflow", "operators", "postgres_operator", "Mapping"] => Replacement::None,
         ["airflow", "operators", "python", "get_current_context"] => Replacement::AutoImport {
             module: "airflow.sdk",
             name: "get_current_context",

crates/ruff_linter/src/rules/airflow/rules/suggested_to_move_to_provider_in_3.rs

@@ -65,9 +65,6 @@ impl Violation for Airflow3SuggestedToMoveToProvider<'_> {
             replacement,
         } = self;
         match replacement {
-            ProviderReplacement::None => {
-                format!("`{deprecated}` is removed in Airflow 3.0")
-            }
             ProviderReplacement::AutoImport {
                 name: _,
                 module: _,
@@ -91,7 +88,6 @@ impl Violation for Airflow3SuggestedToMoveToProvider<'_> {
     fn fix_title(&self) -> Option<String> {
         let Airflow3SuggestedToMoveToProvider { replacement, .. } = self;
         match replacement {
-            ProviderReplacement::None => None,
             ProviderReplacement::AutoImport {
                 module,
                 name,
@@ -215,6 +211,12 @@ fn check_names_moved_to_provider(checker: &Checker, expr: &Expr, ranged: TextRan
                 version: "0.0.1",
             }
         }
+        ["airflow", "sensors", "bash", "BashSensor"] => ProviderReplacement::AutoImport {
+            module: "airflow.providers.standard.sensor.bash",
+            name: "BashSensor",
+            provider: "standard",
+            version: "0.0.1",
+        },
         [
             "airflow",
             "sensors",
@@ -243,6 +245,12 @@ fn check_names_moved_to_provider(checker: &Checker, expr: &Expr, ranged: TextRan
             provider: "standard",
             version: "0.0.2",
         },
+        ["airflow", "sensors", "python", "PythonSensor"] => ProviderReplacement::AutoImport {
+            module: "airflow.providers.standard.sensors.python",
+            name: "PythonSensor",
+            provider: "standard",
+            version: "0.0.1",
+        },
         [
             "airflow",
             "sensors",
@@ -307,16 +315,6 @@ fn check_names_moved_to_provider(checker: &Checker, expr: &Expr, ranged: TextRan
         ProviderReplacement::SourceModuleMovedToProvider { module, name, .. } => {
             (module, name.as_str())
         }
-        ProviderReplacement::None => {
-            checker.report_diagnostic(
-                Airflow3SuggestedToMoveToProvider {
-                    deprecated: qualified_name,
-                    replacement: replacement.clone(),
-                },
-                ranged.range(),
-            );
-            return;
-        }
     };
 
     if is_guarded_by_try_except(expr, module, name, checker.semantic()) {

crates/ruff_linter/src/rules/airflow/rules/suggested_to_update_3_0.rs

@@ -17,9 +17,9 @@ use ruff_text_size::TextRange;
 /// ## Why is this bad?
 /// Airflow 3.0 removed various deprecated functions, members, and other
 /// values. Some have more modern replacements. Others are considered too niche
-/// and not worth to be maintained in Airflow.
+/// and not worth continued maintenance in Airflow.
 /// Even though these symbols still work fine on Airflow 3.0, they are expected to be removed in a future version.
-/// The user is suggested to replace the original usage with the new ones.
+/// Where available, users should replace the removed functionality with the new alternatives.
 ///
 /// ## Example
 /// ```python
@@ -157,6 +157,9 @@ fn check_call_arguments(checker: &Checker, qualified_name: &QualifiedName, argum
         ["airflow", .., "DAG" | "dag"] => {
             diagnostic_for_argument(checker, arguments, "sla_miss_callback", None);
         }
+        ["airflow", "timetables", "datasets", "DatasetOrTimeSchedule"] => {
+            diagnostic_for_argument(checker, arguments, "datasets", Some("assets"));
+        }
         segments => {
             if is_airflow_builtin_or_provider(segments, "operators", "Operator") {
                 diagnostic_for_argument(checker, arguments, "sla", None);
@@ -227,13 +230,26 @@ fn check_name(checker: &Checker, expr: &Expr, range: TextRange) {
             module: "airflow.sdk",
             name: (*rest).to_string(),
         },
+        [
+            "airflow",
+            "decorators",
+            "base",
+            rest @ ("DecoratedMappedOperator"
+            | "DecoratedOperator"
+            | "TaskDecorator"
+            | "get_unique_task_id"
+            | "task_decorator_factory"),
+        ] => Replacement::SourceModuleMoved {
+            module: "airflow.sdk.bases.decorator",
+            name: (*rest).to_string(),
+        },
 
         // airflow.io
         ["airflow", "io", "path", "ObjectStoragePath"] => Replacement::SourceModuleMoved {
             module: "airflow.sdk",
             name: "ObjectStoragePath".to_string(),
         },
-        ["airflow", "io", "storage", "attach"] => Replacement::SourceModuleMoved {
+        ["airflow", "io", "store", "attach"] => Replacement::SourceModuleMoved {
             module: "airflow.sdk.io",
             name: "attach".to_string(),
         },
@@ -245,6 +261,10 @@ fn check_name(checker: &Checker, expr: &Expr, range: TextRange) {
                 name: (*rest).to_string(),
             }
         }
+        ["airflow", "models", "Param"] => Replacement::AutoImport {
+            module: "airflow.sdk.definitions.param",
+            name: "Param",
+        },
 
         // airflow.models.baseoperator
         [
@@ -260,16 +280,30 @@ fn check_name(checker: &Checker, expr: &Expr, range: TextRange) {
             module: "airflow.sdk",
             name: "BaseOperatorLink",
         },
+
         // airflow.model..DAG
         ["airflow", "models", .., "DAG"] => Replacement::SourceModuleMoved {
             module: "airflow.sdk",
             name: "DAG".to_string(),
         },
+
+        // airflow.sensors.base
+        [
+            "airflow",
+            "sensors",
+            "base",
+            rest @ ("BaseSensorOperator" | "PokeReturnValue" | "poke_mode_only"),
+        ] => Replacement::SourceModuleMoved {
+            module: "airflow.sdk",
+            name: (*rest).to_string(),
+        },
+
         // airflow.timetables
         ["airflow", "timetables", "datasets", "DatasetOrTimeSchedule"] => Replacement::AutoImport {
             module: "airflow.timetables.assets",
             name: "AssetOrTimeSchedule",
         },
+
         // airflow.utils
         [
             "airflow",

crates/ruff_linter/src/rules/airflow/snapshots/ruff_linter__rules__airflow__tests__AIR002_AIR002.py.snap

@@ -1,7 +1,7 @@
 ---
 source: crates/ruff_linter/src/rules/airflow/mod.rs
 ---
-AIR002 DAG should have an explicit `schedule` argument
+AIR002 `DAG` or `@dag` should have an explicit `schedule` argument
  --> AIR002.py:4:1
   |
 2 | from airflow.timetables.simple import NullTimetable
@@ -12,7 +12,7 @@ AIR002 DAG should have an explicit `schedule` argument
 6 | DAG(dag_id="class_schedule", schedule="@hourly")
   |
 
-AIR002 DAG should have an explicit `schedule` argument
+AIR002 `DAG` or `@dag` should have an explicit `schedule` argument
   --> AIR002.py:13:2
    |
 13 | @dag()

crates/ruff_linter/src/rules/airflow/snapshots/ruff_linter__rules__airflow__tests__AIR301_AIR301_args.py.snap

@@ -12,16 +12,14 @@ AIR301 [*] `schedule_interval` is removed in Airflow 3.0
 23 | DAG(dag_id="class_timetable", timetable=NullTimetable())
    |
 help: Use `schedule` instead
-
-ℹ Safe fix
-18 18 | 
-19 19 | DAG(dag_id="class_schedule", schedule="@hourly")
-20 20 | 
-21    |-DAG(dag_id="class_schedule_interval", schedule_interval="@hourly")
-   21 |+DAG(dag_id="class_schedule_interval", schedule="@hourly")
-22 22 | 
-23 23 | DAG(dag_id="class_timetable", timetable=NullTimetable())
-24 24 | 
+18 | 
+19 | DAG(dag_id="class_schedule", schedule="@hourly")
+20 | 
+   - DAG(dag_id="class_schedule_interval", schedule_interval="@hourly")
+21 + DAG(dag_id="class_schedule_interval", schedule="@hourly")
+22 | 
+23 | DAG(dag_id="class_timetable", timetable=NullTimetable())
+24 | 
 
 AIR301 [*] `timetable` is removed in Airflow 3.0
   --> AIR301_args.py:23:31
@@ -32,16 +30,14 @@ AIR301 [*] `timetable` is removed in Airflow 3.0
    |                               ^^^^^^^^^
    |
 help: Use `schedule` instead
-
-ℹ Safe fix
-20 20 | 
-21 21 | DAG(dag_id="class_schedule_interval", schedule_interval="@hourly")
-22 22 | 
-23    |-DAG(dag_id="class_timetable", timetable=NullTimetable())
-   23 |+DAG(dag_id="class_timetable", schedule=NullTimetable())
-24 24 | 
-25 25 | 
-26 26 | DAG(dag_id="class_fail_stop", fail_stop=True)
+20 | 
+21 | DAG(dag_id="class_schedule_interval", schedule_interval="@hourly")
+22 | 
+   - DAG(dag_id="class_timetable", timetable=NullTimetable())
+23 + DAG(dag_id="class_timetable", schedule=NullTimetable())
+24 | 
+25 | 
+26 | DAG(dag_id="class_fail_stop", fail_stop=True)
 
 AIR301 [*] `fail_stop` is removed in Airflow 3.0
   --> AIR301_args.py:26:31
@@ -52,16 +48,14 @@ AIR301 [*] `fail_stop` is removed in Airflow 3.0
 28 | DAG(dag_id="class_default_view", default_view="dag_default_view")
    |
 help: Use `fail_fast` instead
-
-ℹ Safe fix
-23 23 | DAG(dag_id="class_timetable", timetable=NullTimetable())
-24 24 | 
-25 25 | 
-26    |-DAG(dag_id="class_fail_stop", fail_stop=True)
-   26 |+DAG(dag_id="class_fail_stop", fail_fast=True)
-27 27 | 
-28 28 | DAG(dag_id="class_default_view", default_view="dag_default_view")
-29 29 | 
+23 | DAG(dag_id="class_timetable", timetable=NullTimetable())
+24 | 
+25 | 
+   - DAG(dag_id="class_fail_stop", fail_stop=True)
+26 + DAG(dag_id="class_fail_stop", fail_fast=True)
+27 | 
+28 | DAG(dag_id="class_default_view", default_view="dag_default_view")
+29 | 
 
 AIR301 `default_view` is removed in Airflow 3.0
   --> AIR301_args.py:28:34
@@ -94,16 +88,14 @@ AIR301 [*] `schedule_interval` is removed in Airflow 3.0
 43 |     pass
    |
 help: Use `schedule` instead
-
-ℹ Safe fix
-38 38 |     pass
-39 39 | 
-40 40 | 
-41    |-@dag(schedule_interval="0 * * * *")
-   41 |+@dag(schedule="0 * * * *")
-42 42 | def decorator_schedule_interval():
-43 43 |     pass
-44 44 | 
+38 |     pass
+39 | 
+40 | 
+   - @dag(schedule_interval="0 * * * *")
+41 + @dag(schedule="0 * * * *")
+42 | def decorator_schedule_interval():
+43 |     pass
+44 | 
 
 AIR301 [*] `timetable` is removed in Airflow 3.0
   --> AIR301_args.py:46:6
@@ -114,16 +106,14 @@ AIR301 [*] `timetable` is removed in Airflow 3.0
 48 |     pass
    |
 help: Use `schedule` instead
-
-ℹ Safe fix
-43 43 |     pass
-44 44 | 
-45 45 | 
-46    |-@dag(timetable=NullTimetable())
-   46 |+@dag(schedule=NullTimetable())
-47 47 | def decorator_timetable():
-48 48 |     pass
-49 49 | 
+43 |     pass
+44 | 
+45 | 
+   - @dag(timetable=NullTimetable())
+46 + @dag(schedule=NullTimetable())
+47 | def decorator_timetable():
+48 |     pass
+49 | 
 
 AIR301 [*] `execution_date` is removed in Airflow 3.0
   --> AIR301_args.py:54:62
@@ -136,16 +126,14 @@ AIR301 [*] `execution_date` is removed in Airflow 3.0
 56 |     trigger_dagrun_op2 = TriggerDagRunOperator(
    |
 help: Use `logical_date` instead
-
-ℹ Safe fix
-51 51 | @dag()
-52 52 | def decorator_deprecated_operator_args():
-53 53 |     trigger_dagrun_op = trigger_dagrun.TriggerDagRunOperator(
-54    |-        task_id="trigger_dagrun_op1", trigger_dag_id="test", execution_date="2024-12-04"
-   54 |+        task_id="trigger_dagrun_op1", trigger_dag_id="test", logical_date="2024-12-04"
-55 55 |     )
-56 56 |     trigger_dagrun_op2 = TriggerDagRunOperator(
-57 57 |         task_id="trigger_dagrun_op2", trigger_dag_id="test", execution_date="2024-12-04"
+51 | @dag()
+52 | def decorator_deprecated_operator_args():
+53 |     trigger_dagrun_op = trigger_dagrun.TriggerDagRunOperator(
+   -         task_id="trigger_dagrun_op1", trigger_dag_id="test", execution_date="2024-12-04"
+54 +         task_id="trigger_dagrun_op1", trigger_dag_id="test", logical_date="2024-12-04"
+55 |     )
+56 |     trigger_dagrun_op2 = TriggerDagRunOperator(
+57 |         task_id="trigger_dagrun_op2", trigger_dag_id="test", execution_date="2024-12-04"
 
 AIR301 [*] `execution_date` is removed in Airflow 3.0
   --> AIR301_args.py:57:62
@@ -157,16 +145,14 @@ AIR301 [*] `execution_date` is removed in Airflow 3.0
 58 |     )
    |
 help: Use `logical_date` instead
-
-ℹ Safe fix
-54 54 |         task_id="trigger_dagrun_op1", trigger_dag_id="test", execution_date="2024-12-04"
-55 55 |     )
-56 56 |     trigger_dagrun_op2 = TriggerDagRunOperator(
-57    |-        task_id="trigger_dagrun_op2", trigger_dag_id="test", execution_date="2024-12-04"
-   57 |+        task_id="trigger_dagrun_op2", trigger_dag_id="test", logical_date="2024-12-04"
-58 58 |     )
-59 59 | 
-60 60 |     branch_dt_op = datetime.BranchDateTimeOperator(
+54 |         task_id="trigger_dagrun_op1", trigger_dag_id="test", execution_date="2024-12-04"
+55 |     )
+56 |     trigger_dagrun_op2 = TriggerDagRunOperator(
+   -         task_id="trigger_dagrun_op2", trigger_dag_id="test", execution_date="2024-12-04"
+57 +         task_id="trigger_dagrun_op2", trigger_dag_id="test", logical_date="2024-12-04"
+58 |     )
+59 | 
+60 |     branch_dt_op = datetime.BranchDateTimeOperator(
 
 AIR301 [*] `use_task_execution_day` is removed in Airflow 3.0
   --> AIR301_args.py:61:33
@@ -178,16 +164,14 @@ AIR301 [*] `use_task_execution_day` is removed in Airflow 3.0
 63 |     branch_dt_op2 = BranchDateTimeOperator(
    |
 help: Use `use_task_logical_date` instead
-
-ℹ Safe fix
-58 58 |     )
-59 59 | 
-60 60 |     branch_dt_op = datetime.BranchDateTimeOperator(
-61    |-        task_id="branch_dt_op", use_task_execution_day=True, task_concurrency=5
-   61 |+        task_id="branch_dt_op", use_task_logical_date=True, task_concurrency=5
-62 62 |     )
-63 63 |     branch_dt_op2 = BranchDateTimeOperator(
-64 64 |         task_id="branch_dt_op2",
+58 |     )
+59 | 
+60 |     branch_dt_op = datetime.BranchDateTimeOperator(
+   -         task_id="branch_dt_op", use_task_execution_day=True, task_concurrency=5
+61 +         task_id="branch_dt_op", use_task_logical_date=True, task_concurrency=5
+62 |     )
+63 |     branch_dt_op2 = BranchDateTimeOperator(
+64 |         task_id="branch_dt_op2",
 
 AIR301 [*] `task_concurrency` is removed in Airflow 3.0
   --> AIR301_args.py:61:62
@@ -199,16 +183,14 @@ AIR301 [*] `task_concurrency` is removed in Airflow 3.0
 63 |     branch_dt_op2 = BranchDateTimeOperator(
    |
 help: Use `max_active_tis_per_dag` instead
-
-ℹ Safe fix
-58 58 |     )
-59 59 | 
-60 60 |     branch_dt_op = datetime.BranchDateTimeOperator(
-61    |-        task_id="branch_dt_op", use_task_execution_day=True, task_concurrency=5
-   61 |+        task_id="branch_dt_op", use_task_execution_day=True, max_active_tis_per_dag=5
-62 62 |     )
-63 63 |     branch_dt_op2 = BranchDateTimeOperator(
-64 64 |         task_id="branch_dt_op2",
+58 |     )
+59 | 
+60 |     branch_dt_op = datetime.BranchDateTimeOperator(
+   -         task_id="branch_dt_op", use_task_execution_day=True, task_concurrency=5
+61 +         task_id="branch_dt_op", use_task_execution_day=True, max_active_tis_per_dag=5
+62 |     )
+63 |     branch_dt_op2 = BranchDateTimeOperator(
+64 |         task_id="branch_dt_op2",
 
 AIR301 [*] `use_task_execution_day` is removed in Airflow 3.0
   --> AIR301_args.py:65:9
@@ -221,16 +203,14 @@ AIR301 [*] `use_task_execution_day` is removed in Airflow 3.0
 67 |     )
    |
 help: Use `use_task_logical_date` instead
-
-ℹ Safe fix
-62 62 |     )
-63 63 |     branch_dt_op2 = BranchDateTimeOperator(
-64 64 |         task_id="branch_dt_op2",
-65    |-        use_task_execution_day=True,
-   65 |+        use_task_logical_date=True,
-66 66 |         sla=timedelta(seconds=10),
-67 67 |     )
-68 68 | 
+62 |     )
+63 |     branch_dt_op2 = BranchDateTimeOperator(
+64 |         task_id="branch_dt_op2",
+   -         use_task_execution_day=True,
+65 +         use_task_logical_date=True,
+66 |         sla=timedelta(seconds=10),
+67 |     )
+68 | 
 
 AIR301 [*] `use_task_execution_day` is removed in Airflow 3.0
   --> AIR301_args.py:92:9
@@ -242,16 +222,14 @@ AIR301 [*] `use_task_execution_day` is removed in Airflow 3.0
 93 |     )
    |
 help: Use `use_task_logical_date` instead
-
-ℹ Safe fix
-89 89 |         follow_task_ids_if_false=None,
-90 90 |         follow_task_ids_if_true=None,
-91 91 |         week_day=1,
-92    |-        use_task_execution_day=True,
-   92 |+        use_task_logical_date=True,
-93 93 |     )
-94 94 | 
-95 95 |     trigger_dagrun_op >> trigger_dagrun_op2
+89 |         follow_task_ids_if_false=None,
+90 |         follow_task_ids_if_true=None,
+91 |         week_day=1,
+   -         use_task_execution_day=True,
+92 +         use_task_logical_date=True,
+93 |     )
+94 | 
+95 |     trigger_dagrun_op >> trigger_dagrun_op2
 
 AIR301 `filename_template` is removed in Airflow 3.0
    --> AIR301_args.py:102:15

crates/ruff_linter/src/rules/airflow/snapshots/ruff_linter__rules__airflow__tests__AIR301_AIR301_class_attribute.py.snap

@@ -11,16 +11,14 @@ AIR301 [*] `iter_datasets` is removed in Airflow 3.0
 26 | dataset_from_root.iter_dataset_aliases()
    |
 help: Use `iter_assets` instead
-
-ℹ Safe fix
-22 22 | 
-23 23 | # airflow.Dataset
-24 24 | dataset_from_root = DatasetFromRoot()
-25    |-dataset_from_root.iter_datasets()
-   25 |+dataset_from_root.iter_assets()
-26 26 | dataset_from_root.iter_dataset_aliases()
-27 27 | 
-28 28 | # airflow.datasets
+22 | 
+23 | # airflow.Dataset
+24 | dataset_from_root = DatasetFromRoot()
+   - dataset_from_root.iter_datasets()
+25 + dataset_from_root.iter_assets()
+26 | dataset_from_root.iter_dataset_aliases()
+27 | 
+28 | # airflow.datasets
 
 AIR301 [*] `iter_dataset_aliases` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:26:19
@@ -33,16 +31,14 @@ AIR301 [*] `iter_dataset_aliases` is removed in Airflow 3.0
 28 | # airflow.datasets
    |
 help: Use `iter_asset_aliases` instead
-
-ℹ Safe fix
-23 23 | # airflow.Dataset
-24 24 | dataset_from_root = DatasetFromRoot()
-25 25 | dataset_from_root.iter_datasets()
-26    |-dataset_from_root.iter_dataset_aliases()
-   26 |+dataset_from_root.iter_asset_aliases()
-27 27 | 
-28 28 | # airflow.datasets
-29 29 | dataset_to_test_method_call = Dataset()
+23 | # airflow.Dataset
+24 | dataset_from_root = DatasetFromRoot()
+25 | dataset_from_root.iter_datasets()
+   - dataset_from_root.iter_dataset_aliases()
+26 + dataset_from_root.iter_asset_aliases()
+27 | 
+28 | # airflow.datasets
+29 | dataset_to_test_method_call = Dataset()
 
 AIR301 [*] `iter_datasets` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:30:29
@@ -54,16 +50,14 @@ AIR301 [*] `iter_datasets` is removed in Airflow 3.0
 31 | dataset_to_test_method_call.iter_dataset_aliases()
    |
 help: Use `iter_assets` instead
-
-ℹ Safe fix
-27 27 | 
-28 28 | # airflow.datasets
-29 29 | dataset_to_test_method_call = Dataset()
-30    |-dataset_to_test_method_call.iter_datasets()
-   30 |+dataset_to_test_method_call.iter_assets()
-31 31 | dataset_to_test_method_call.iter_dataset_aliases()
-32 32 | 
-33 33 | alias_to_test_method_call = DatasetAlias()
+27 | 
+28 | # airflow.datasets
+29 | dataset_to_test_method_call = Dataset()
+   - dataset_to_test_method_call.iter_datasets()
+30 + dataset_to_test_method_call.iter_assets()
+31 | dataset_to_test_method_call.iter_dataset_aliases()
+32 | 
+33 | alias_to_test_method_call = DatasetAlias()
 
 AIR301 [*] `iter_dataset_aliases` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:31:29
@@ -76,16 +70,14 @@ AIR301 [*] `iter_dataset_aliases` is removed in Airflow 3.0
 33 | alias_to_test_method_call = DatasetAlias()
    |
 help: Use `iter_asset_aliases` instead
-
-ℹ Safe fix
-28 28 | # airflow.datasets
-29 29 | dataset_to_test_method_call = Dataset()
-30 30 | dataset_to_test_method_call.iter_datasets()
-31    |-dataset_to_test_method_call.iter_dataset_aliases()
-   31 |+dataset_to_test_method_call.iter_asset_aliases()
-32 32 | 
-33 33 | alias_to_test_method_call = DatasetAlias()
-34 34 | alias_to_test_method_call.iter_datasets()
+28 | # airflow.datasets
+29 | dataset_to_test_method_call = Dataset()
+30 | dataset_to_test_method_call.iter_datasets()
+   - dataset_to_test_method_call.iter_dataset_aliases()
+31 + dataset_to_test_method_call.iter_asset_aliases()
+32 | 
+33 | alias_to_test_method_call = DatasetAlias()
+34 | alias_to_test_method_call.iter_datasets()
 
 AIR301 [*] `iter_datasets` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:34:27
@@ -96,16 +88,14 @@ AIR301 [*] `iter_datasets` is removed in Airflow 3.0
 35 | alias_to_test_method_call.iter_dataset_aliases()
    |
 help: Use `iter_assets` instead
-
-ℹ Safe fix
-31 31 | dataset_to_test_method_call.iter_dataset_aliases()
-32 32 | 
-33 33 | alias_to_test_method_call = DatasetAlias()
-34    |-alias_to_test_method_call.iter_datasets()
-   34 |+alias_to_test_method_call.iter_assets()
-35 35 | alias_to_test_method_call.iter_dataset_aliases()
-36 36 | 
-37 37 | any_to_test_method_call = DatasetAny()
+31 | dataset_to_test_method_call.iter_dataset_aliases()
+32 | 
+33 | alias_to_test_method_call = DatasetAlias()
+   - alias_to_test_method_call.iter_datasets()
+34 + alias_to_test_method_call.iter_assets()
+35 | alias_to_test_method_call.iter_dataset_aliases()
+36 | 
+37 | any_to_test_method_call = DatasetAny()
 
 AIR301 [*] `iter_dataset_aliases` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:35:27
@@ -118,16 +108,14 @@ AIR301 [*] `iter_dataset_aliases` is removed in Airflow 3.0
 37 | any_to_test_method_call = DatasetAny()
    |
 help: Use `iter_asset_aliases` instead
-
-ℹ Safe fix
-32 32 | 
-33 33 | alias_to_test_method_call = DatasetAlias()
-34 34 | alias_to_test_method_call.iter_datasets()
-35    |-alias_to_test_method_call.iter_dataset_aliases()
-   35 |+alias_to_test_method_call.iter_asset_aliases()
-36 36 | 
-37 37 | any_to_test_method_call = DatasetAny()
-38 38 | any_to_test_method_call.iter_datasets()
+32 | 
+33 | alias_to_test_method_call = DatasetAlias()
+34 | alias_to_test_method_call.iter_datasets()
+   - alias_to_test_method_call.iter_dataset_aliases()
+35 + alias_to_test_method_call.iter_asset_aliases()
+36 | 
+37 | any_to_test_method_call = DatasetAny()
+38 | any_to_test_method_call.iter_datasets()
 
 AIR301 [*] `iter_datasets` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:38:25
@@ -138,16 +126,14 @@ AIR301 [*] `iter_datasets` is removed in Airflow 3.0
 39 | any_to_test_method_call.iter_dataset_aliases()
    |
 help: Use `iter_assets` instead
-
-ℹ Safe fix
-35 35 | alias_to_test_method_call.iter_dataset_aliases()
-36 36 | 
-37 37 | any_to_test_method_call = DatasetAny()
-38    |-any_to_test_method_call.iter_datasets()
-   38 |+any_to_test_method_call.iter_assets()
-39 39 | any_to_test_method_call.iter_dataset_aliases()
-40 40 | 
-41 41 | # airflow.datasets.manager
+35 | alias_to_test_method_call.iter_dataset_aliases()
+36 | 
+37 | any_to_test_method_call = DatasetAny()
+   - any_to_test_method_call.iter_datasets()
+38 + any_to_test_method_call.iter_assets()
+39 | any_to_test_method_call.iter_dataset_aliases()
+40 | 
+41 | # airflow.datasets.manager
 
 AIR301 [*] `iter_dataset_aliases` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:39:25
@@ -160,16 +146,14 @@ AIR301 [*] `iter_dataset_aliases` is removed in Airflow 3.0
 41 | # airflow.datasets.manager
    |
 help: Use `iter_asset_aliases` instead
-
-ℹ Safe fix
-36 36 | 
-37 37 | any_to_test_method_call = DatasetAny()
-38 38 | any_to_test_method_call.iter_datasets()
-39    |-any_to_test_method_call.iter_dataset_aliases()
-   39 |+any_to_test_method_call.iter_asset_aliases()
-40 40 | 
-41 41 | # airflow.datasets.manager
-42 42 | dm = DatasetManager()
+36 | 
+37 | any_to_test_method_call = DatasetAny()
+38 | any_to_test_method_call.iter_datasets()
+   - any_to_test_method_call.iter_dataset_aliases()
+39 + any_to_test_method_call.iter_asset_aliases()
+40 | 
+41 | # airflow.datasets.manager
+42 | dm = DatasetManager()
 
 AIR301 [*] `airflow.datasets.manager.DatasetManager` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:42:6
@@ -181,24 +165,22 @@ AIR301 [*] `airflow.datasets.manager.DatasetManager` is removed in Airflow 3.0
 44 | dm.create_datasets()
    |
 help: Use `AssetManager` from `airflow.assets.manager` instead.
-
-ℹ Safe fix
-19 19 | from airflow.providers_manager import ProvidersManager
-20 20 | from airflow.secrets.base_secrets import BaseSecretsBackend
-21 21 | from airflow.secrets.local_filesystem import LocalFilesystemBackend
-   22 |+from airflow.assets.manager import AssetManager
-22 23 | 
-23 24 | # airflow.Dataset
-24 25 | dataset_from_root = DatasetFromRoot()
+19 | from airflow.providers_manager import ProvidersManager
+20 | from airflow.secrets.base_secrets import BaseSecretsBackend
+21 | from airflow.secrets.local_filesystem import LocalFilesystemBackend
+22 + from airflow.assets.manager import AssetManager
+23 | 
+24 | # airflow.Dataset
+25 | dataset_from_root = DatasetFromRoot()
 --------------------------------------------------------------------------------
-39 40 | any_to_test_method_call.iter_dataset_aliases()
-40 41 | 
-41 42 | # airflow.datasets.manager
-42    |-dm = DatasetManager()
-   43 |+dm = AssetManager()
-43 44 | dm.register_dataset_change()
-44 45 | dm.create_datasets()
-45 46 | dm.notify_dataset_created()
+40 | any_to_test_method_call.iter_dataset_aliases()
+41 | 
+42 | # airflow.datasets.manager
+   - dm = DatasetManager()
+43 + dm = AssetManager()
+44 | dm.register_dataset_change()
+45 | dm.create_datasets()
+46 | dm.notify_dataset_created()
 
 AIR301 [*] `register_dataset_change` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:43:4
@@ -211,16 +193,14 @@ AIR301 [*] `register_dataset_change` is removed in Airflow 3.0
 45 | dm.notify_dataset_created()
    |
 help: Use `register_asset_change` instead
-
-ℹ Safe fix
-40 40 | 
-41 41 | # airflow.datasets.manager
-42 42 | dm = DatasetManager()
-43    |-dm.register_dataset_change()
-   43 |+dm.register_asset_change()
-44 44 | dm.create_datasets()
-45 45 | dm.notify_dataset_created()
-46 46 | dm.notify_dataset_changed()
+40 | 
+41 | # airflow.datasets.manager
+42 | dm = DatasetManager()
+   - dm.register_dataset_change()
+43 + dm.register_asset_change()
+44 | dm.create_datasets()
+45 | dm.notify_dataset_created()
+46 | dm.notify_dataset_changed()
 
 AIR301 [*] `create_datasets` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:44:4
@@ -233,16 +213,14 @@ AIR301 [*] `create_datasets` is removed in Airflow 3.0
 46 | dm.notify_dataset_changed()
    |
 help: Use `create_assets` instead
-
-ℹ Safe fix
-41 41 | # airflow.datasets.manager
-42 42 | dm = DatasetManager()
-43 43 | dm.register_dataset_change()
-44    |-dm.create_datasets()
-   44 |+dm.create_assets()
-45 45 | dm.notify_dataset_created()
-46 46 | dm.notify_dataset_changed()
-47 47 | dm.notify_dataset_alias_created()
+41 | # airflow.datasets.manager
+42 | dm = DatasetManager()
+43 | dm.register_dataset_change()
+   - dm.create_datasets()
+44 + dm.create_assets()
+45 | dm.notify_dataset_created()
+46 | dm.notify_dataset_changed()
+47 | dm.notify_dataset_alias_created()
 
 AIR301 [*] `notify_dataset_created` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:45:4
@@ -255,16 +233,14 @@ AIR301 [*] `notify_dataset_created` is removed in Airflow 3.0
 47 | dm.notify_dataset_alias_created()
    |
 help: Use `notify_asset_created` instead
-
-ℹ Safe fix
-42 42 | dm = DatasetManager()
-43 43 | dm.register_dataset_change()
-44 44 | dm.create_datasets()
-45    |-dm.notify_dataset_created()
-   45 |+dm.notify_asset_created()
-46 46 | dm.notify_dataset_changed()
-47 47 | dm.notify_dataset_alias_created()
-48 48 | 
+42 | dm = DatasetManager()
+43 | dm.register_dataset_change()
+44 | dm.create_datasets()
+   - dm.notify_dataset_created()
+45 + dm.notify_asset_created()
+46 | dm.notify_dataset_changed()
+47 | dm.notify_dataset_alias_created()
+48 | 
 
 AIR301 [*] `notify_dataset_changed` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:46:4
@@ -276,16 +252,14 @@ AIR301 [*] `notify_dataset_changed` is removed in Airflow 3.0
 47 | dm.notify_dataset_alias_created()
    |
 help: Use `notify_asset_changed` instead
-
-ℹ Safe fix
-43 43 | dm.register_dataset_change()
-44 44 | dm.create_datasets()
-45 45 | dm.notify_dataset_created()
-46    |-dm.notify_dataset_changed()
-   46 |+dm.notify_asset_changed()
-47 47 | dm.notify_dataset_alias_created()
-48 48 | 
-49 49 | # airflow.lineage.hook
+43 | dm.register_dataset_change()
+44 | dm.create_datasets()
+45 | dm.notify_dataset_created()
+   - dm.notify_dataset_changed()
+46 + dm.notify_asset_changed()
+47 | dm.notify_dataset_alias_created()
+48 | 
+49 | # airflow.lineage.hook
 
 AIR301 [*] `notify_dataset_alias_created` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:47:4
@@ -298,16 +272,14 @@ AIR301 [*] `notify_dataset_alias_created` is removed in Airflow 3.0
 49 | # airflow.lineage.hook
    |
 help: Use `notify_asset_alias_created` instead
-
-ℹ Safe fix
-44 44 | dm.create_datasets()
-45 45 | dm.notify_dataset_created()
-46 46 | dm.notify_dataset_changed()
-47    |-dm.notify_dataset_alias_created()
-   47 |+dm.notify_asset_alias_created()
-48 48 | 
-49 49 | # airflow.lineage.hook
-50 50 | dl_info = DatasetLineageInfo()
+44 | dm.create_datasets()
+45 | dm.notify_dataset_created()
+46 | dm.notify_dataset_changed()
+   - dm.notify_dataset_alias_created()
+47 + dm.notify_asset_alias_created()
+48 | 
+49 | # airflow.lineage.hook
+50 | dl_info = DatasetLineageInfo()
 
 AIR301 [*] `airflow.lineage.hook.DatasetLineageInfo` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:50:11
@@ -318,25 +290,23 @@ AIR301 [*] `airflow.lineage.hook.DatasetLineageInfo` is removed in Airflow 3.0
 51 | dl_info.dataset
    |
 help: Use `AssetLineageInfo` from `airflow.lineage.hook` instead.
-
-ℹ Safe fix
-9  9  |     DatasetAny,
-10 10 | )
-11 11 | from airflow.datasets.manager import DatasetManager
-12    |-from airflow.lineage.hook import DatasetLineageInfo, HookLineageCollector
-   12 |+from airflow.lineage.hook import DatasetLineageInfo, HookLineageCollector, AssetLineageInfo
-13 13 | from airflow.providers.amazon.aws.auth_manager.aws_auth_manager import AwsAuthManager
-14 14 | from airflow.providers.apache.beam.hooks import BeamHook, NotAir302HookError
-15 15 | from airflow.providers.google.cloud.secrets.secret_manager import (
+9  |     DatasetAny,
+10 | )
+11 | from airflow.datasets.manager import DatasetManager
+   - from airflow.lineage.hook import DatasetLineageInfo, HookLineageCollector
+12 + from airflow.lineage.hook import DatasetLineageInfo, HookLineageCollector, AssetLineageInfo
+13 | from airflow.providers.amazon.aws.auth_manager.aws_auth_manager import AwsAuthManager
+14 | from airflow.providers.apache.beam.hooks import BeamHook, NotAir302HookError
+15 | from airflow.providers.google.cloud.secrets.secret_manager import (
 --------------------------------------------------------------------------------
-47 47 | dm.notify_dataset_alias_created()
-48 48 | 
-49 49 | # airflow.lineage.hook
-50    |-dl_info = DatasetLineageInfo()
-   50 |+dl_info = AssetLineageInfo()
-51 51 | dl_info.dataset
-52 52 | 
-53 53 | hlc = HookLineageCollector()
+47 | dm.notify_dataset_alias_created()
+48 | 
+49 | # airflow.lineage.hook
+   - dl_info = DatasetLineageInfo()
+50 + dl_info = AssetLineageInfo()
+51 | dl_info.dataset
+52 | 
+53 | hlc = HookLineageCollector()
 
 AIR301 [*] `dataset` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:51:9
@@ -349,16 +319,14 @@ AIR301 [*] `dataset` is removed in Airflow 3.0
 53 | hlc = HookLineageCollector()
    |
 help: Use `asset` instead
-
-ℹ Safe fix
-48 48 | 
-49 49 | # airflow.lineage.hook
-50 50 | dl_info = DatasetLineageInfo()
-51    |-dl_info.dataset
-   51 |+dl_info.asset
-52 52 | 
-53 53 | hlc = HookLineageCollector()
-54 54 | hlc.create_dataset()
+48 | 
+49 | # airflow.lineage.hook
+50 | dl_info = DatasetLineageInfo()
+   - dl_info.dataset
+51 + dl_info.asset
+52 | 
+53 | hlc = HookLineageCollector()
+54 | hlc.create_dataset()
 
 AIR301 [*] `create_dataset` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:54:5
@@ -370,16 +338,14 @@ AIR301 [*] `create_dataset` is removed in Airflow 3.0
 56 | hlc.add_output_dataset()
    |
 help: Use `create_asset` instead
-
-ℹ Safe fix
-51 51 | dl_info.dataset
-52 52 | 
-53 53 | hlc = HookLineageCollector()
-54    |-hlc.create_dataset()
-   54 |+hlc.create_asset()
-55 55 | hlc.add_input_dataset()
-56 56 | hlc.add_output_dataset()
-57 57 | hlc.collected_datasets()
+51 | dl_info.dataset
+52 | 
+53 | hlc = HookLineageCollector()
+   - hlc.create_dataset()
+54 + hlc.create_asset()
+55 | hlc.add_input_dataset()
+56 | hlc.add_output_dataset()
+57 | hlc.collected_datasets()
 
 AIR301 [*] `add_input_dataset` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:55:5
@@ -392,16 +358,14 @@ AIR301 [*] `add_input_dataset` is removed in Airflow 3.0
 57 | hlc.collected_datasets()
    |
 help: Use `add_input_asset` instead
-
-ℹ Safe fix
-52 52 | 
-53 53 | hlc = HookLineageCollector()
-54 54 | hlc.create_dataset()
-55    |-hlc.add_input_dataset()
-   55 |+hlc.add_input_asset()
-56 56 | hlc.add_output_dataset()
-57 57 | hlc.collected_datasets()
-58 58 | 
+52 | 
+53 | hlc = HookLineageCollector()
+54 | hlc.create_dataset()
+   - hlc.add_input_dataset()
+55 + hlc.add_input_asset()
+56 | hlc.add_output_dataset()
+57 | hlc.collected_datasets()
+58 | 
 
 AIR301 [*] `add_output_dataset` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:56:5
@@ -413,16 +377,14 @@ AIR301 [*] `add_output_dataset` is removed in Airflow 3.0
 57 | hlc.collected_datasets()
    |
 help: Use `add_output_asset` instead
-
-ℹ Safe fix
-53 53 | hlc = HookLineageCollector()
-54 54 | hlc.create_dataset()
-55 55 | hlc.add_input_dataset()
-56    |-hlc.add_output_dataset()
-   56 |+hlc.add_output_asset()
-57 57 | hlc.collected_datasets()
-58 58 | 
-59 59 | # airflow.providers.amazon.auth_manager.aws_auth_manager
+53 | hlc = HookLineageCollector()
+54 | hlc.create_dataset()
+55 | hlc.add_input_dataset()
+   - hlc.add_output_dataset()
+56 + hlc.add_output_asset()
+57 | hlc.collected_datasets()
+58 | 
+59 | # airflow.providers.amazon.auth_manager.aws_auth_manager
 
 AIR301 [*] `collected_datasets` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:57:5
@@ -435,16 +397,14 @@ AIR301 [*] `collected_datasets` is removed in Airflow 3.0
 59 | # airflow.providers.amazon.auth_manager.aws_auth_manager
    |
 help: Use `collected_assets` instead
-
-ℹ Safe fix
-54 54 | hlc.create_dataset()
-55 55 | hlc.add_input_dataset()
-56 56 | hlc.add_output_dataset()
-57    |-hlc.collected_datasets()
-   57 |+hlc.collected_assets()
-58 58 | 
-59 59 | # airflow.providers.amazon.auth_manager.aws_auth_manager
-60 60 | aam = AwsAuthManager()
+54 | hlc.create_dataset()
+55 | hlc.add_input_dataset()
+56 | hlc.add_output_dataset()
+   - hlc.collected_datasets()
+57 + hlc.collected_assets()
+58 | 
+59 | # airflow.providers.amazon.auth_manager.aws_auth_manager
+60 | aam = AwsAuthManager()
 
 AIR301 [*] `is_authorized_dataset` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:61:5
@@ -457,16 +417,14 @@ AIR301 [*] `is_authorized_dataset` is removed in Airflow 3.0
 63 | # airflow.providers.apache.beam.hooks
    |
 help: Use `is_authorized_asset` instead
-
-ℹ Safe fix
-58 58 | 
-59 59 | # airflow.providers.amazon.auth_manager.aws_auth_manager
-60 60 | aam = AwsAuthManager()
-61    |-aam.is_authorized_dataset()
-   61 |+aam.is_authorized_asset()
-62 62 | 
-63 63 | # airflow.providers.apache.beam.hooks
-64 64 | # check get_conn_uri is caught if the class inherits from an airflow hook
+58 | 
+59 | # airflow.providers.amazon.auth_manager.aws_auth_manager
+60 | aam = AwsAuthManager()
+   - aam.is_authorized_dataset()
+61 + aam.is_authorized_asset()
+62 | 
+63 | # airflow.providers.apache.beam.hooks
+64 | # check get_conn_uri is caught if the class inherits from an airflow hook
 
 AIR301 [*] `get_conn_uri` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:73:13
@@ -478,16 +436,14 @@ AIR301 [*] `get_conn_uri` is removed in Airflow 3.0
 74 | csm_backend.get_connections()
    |
 help: Use `get_conn_value` instead
-
-ℹ Safe fix
-70 70 | 
-71 71 | # airflow.providers.google.cloud.secrets.secret_manager
-72 72 | csm_backend = CloudSecretManagerBackend()
-73    |-csm_backend.get_conn_uri()
-   73 |+csm_backend.get_conn_value()
-74 74 | csm_backend.get_connections()
-75 75 | 
-76 76 | # airflow.providers.hashicorp.secrets.vault
+70 | 
+71 | # airflow.providers.google.cloud.secrets.secret_manager
+72 | csm_backend = CloudSecretManagerBackend()
+   - csm_backend.get_conn_uri()
+73 + csm_backend.get_conn_value()
+74 | csm_backend.get_connections()
+75 | 
+76 | # airflow.providers.hashicorp.secrets.vault
 
 AIR301 [*] `get_connections` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:74:13
@@ -500,16 +456,14 @@ AIR301 [*] `get_connections` is removed in Airflow 3.0
 76 | # airflow.providers.hashicorp.secrets.vault
    |
 help: Use `get_connection` instead
-
-ℹ Safe fix
-71 71 | # airflow.providers.google.cloud.secrets.secret_manager
-72 72 | csm_backend = CloudSecretManagerBackend()
-73 73 | csm_backend.get_conn_uri()
-74    |-csm_backend.get_connections()
-   74 |+csm_backend.get_connection()
-75 75 | 
-76 76 | # airflow.providers.hashicorp.secrets.vault
-77 77 | vault_backend = VaultBackend()
+71 | # airflow.providers.google.cloud.secrets.secret_manager
+72 | csm_backend = CloudSecretManagerBackend()
+73 | csm_backend.get_conn_uri()
+   - csm_backend.get_connections()
+74 + csm_backend.get_connection()
+75 | 
+76 | # airflow.providers.hashicorp.secrets.vault
+77 | vault_backend = VaultBackend()
 
 AIR301 [*] `get_conn_uri` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:78:15
@@ -521,16 +475,14 @@ AIR301 [*] `get_conn_uri` is removed in Airflow 3.0
 79 | vault_backend.get_connections()
    |
 help: Use `get_conn_value` instead
-
-ℹ Safe fix
-75 75 | 
-76 76 | # airflow.providers.hashicorp.secrets.vault
-77 77 | vault_backend = VaultBackend()
-78    |-vault_backend.get_conn_uri()
-   78 |+vault_backend.get_conn_value()
-79 79 | vault_backend.get_connections()
-80 80 | 
-81 81 | not_an_error = NotAir302SecretError()
+75 | 
+76 | # airflow.providers.hashicorp.secrets.vault
+77 | vault_backend = VaultBackend()
+   - vault_backend.get_conn_uri()
+78 + vault_backend.get_conn_value()
+79 | vault_backend.get_connections()
+80 | 
+81 | not_an_error = NotAir302SecretError()
 
 AIR301 [*] `get_connections` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:79:15
@@ -543,16 +495,14 @@ AIR301 [*] `get_connections` is removed in Airflow 3.0
 81 | not_an_error = NotAir302SecretError()
    |
 help: Use `get_connection` instead
-
-ℹ Safe fix
-76 76 | # airflow.providers.hashicorp.secrets.vault
-77 77 | vault_backend = VaultBackend()
-78 78 | vault_backend.get_conn_uri()
-79    |-vault_backend.get_connections()
-   79 |+vault_backend.get_connection()
-80 80 | 
-81 81 | not_an_error = NotAir302SecretError()
-82 82 | not_an_error.get_conn_uri()
+76 | # airflow.providers.hashicorp.secrets.vault
+77 | vault_backend = VaultBackend()
+78 | vault_backend.get_conn_uri()
+   - vault_backend.get_connections()
+79 + vault_backend.get_connection()
+80 | 
+81 | not_an_error = NotAir302SecretError()
+82 | not_an_error.get_conn_uri()
 
 AIR301 [*] `initialize_providers_dataset_uri_resources` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:86:4
@@ -565,16 +515,14 @@ AIR301 [*] `initialize_providers_dataset_uri_resources` is removed in Airflow 3.
 88 | pm.dataset_uri_handlers
    |
 help: Use `initialize_providers_asset_uri_resources` instead
-
-ℹ Safe fix
-83 83 | 
-84 84 | # airflow.providers_manager
-85 85 | pm = ProvidersManager()
-86    |-pm.initialize_providers_dataset_uri_resources()
-   86 |+pm.initialize_providers_asset_uri_resources()
-87 87 | pm.dataset_factories
-88 88 | pm.dataset_uri_handlers
-89 89 | pm.dataset_to_openlineage_converters
+83 | 
+84 | # airflow.providers_manager
+85 | pm = ProvidersManager()
+   - pm.initialize_providers_dataset_uri_resources()
+86 + pm.initialize_providers_asset_uri_resources()
+87 | pm.dataset_factories
+88 | pm.dataset_uri_handlers
+89 | pm.dataset_to_openlineage_converters
 
 AIR301 [*] `dataset_factories` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:87:4
@@ -587,16 +535,14 @@ AIR301 [*] `dataset_factories` is removed in Airflow 3.0
 89 | pm.dataset_to_openlineage_converters
    |
 help: Use `asset_factories` instead
-
-ℹ Safe fix
-84 84 | # airflow.providers_manager
-85 85 | pm = ProvidersManager()
-86 86 | pm.initialize_providers_dataset_uri_resources()
-87    |-pm.dataset_factories
-   87 |+pm.asset_factories
-88 88 | pm.dataset_uri_handlers
-89 89 | pm.dataset_to_openlineage_converters
-90 90 | 
+84 | # airflow.providers_manager
+85 | pm = ProvidersManager()
+86 | pm.initialize_providers_dataset_uri_resources()
+   - pm.dataset_factories
+87 + pm.asset_factories
+88 | pm.dataset_uri_handlers
+89 | pm.dataset_to_openlineage_converters
+90 | 
 
 AIR301 [*] `dataset_uri_handlers` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:88:4
@@ -608,16 +554,14 @@ AIR301 [*] `dataset_uri_handlers` is removed in Airflow 3.0
 89 | pm.dataset_to_openlineage_converters
    |
 help: Use `asset_uri_handlers` instead
-
-ℹ Safe fix
-85 85 | pm = ProvidersManager()
-86 86 | pm.initialize_providers_dataset_uri_resources()
-87 87 | pm.dataset_factories
-88    |-pm.dataset_uri_handlers
-   88 |+pm.asset_uri_handlers
-89 89 | pm.dataset_to_openlineage_converters
-90 90 | 
-91 91 | # airflow.secrets.base_secrets
+85 | pm = ProvidersManager()
+86 | pm.initialize_providers_dataset_uri_resources()
+87 | pm.dataset_factories
+   - pm.dataset_uri_handlers
+88 + pm.asset_uri_handlers
+89 | pm.dataset_to_openlineage_converters
+90 | 
+91 | # airflow.secrets.base_secrets
 
 AIR301 [*] `dataset_to_openlineage_converters` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:89:4
@@ -630,16 +574,14 @@ AIR301 [*] `dataset_to_openlineage_converters` is removed in Airflow 3.0
 91 | # airflow.secrets.base_secrets
    |
 help: Use `asset_to_openlineage_converters` instead
-
-ℹ Safe fix
-86 86 | pm.initialize_providers_dataset_uri_resources()
-87 87 | pm.dataset_factories
-88 88 | pm.dataset_uri_handlers
-89    |-pm.dataset_to_openlineage_converters
-   89 |+pm.asset_to_openlineage_converters
-90 90 | 
-91 91 | # airflow.secrets.base_secrets
-92 92 | base_secret_backend = BaseSecretsBackend()
+86 | pm.initialize_providers_dataset_uri_resources()
+87 | pm.dataset_factories
+88 | pm.dataset_uri_handlers
+   - pm.dataset_to_openlineage_converters
+89 + pm.asset_to_openlineage_converters
+90 | 
+91 | # airflow.secrets.base_secrets
+92 | base_secret_backend = BaseSecretsBackend()
 
 AIR301 [*] `get_conn_uri` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:93:21
@@ -651,16 +593,14 @@ AIR301 [*] `get_conn_uri` is removed in Airflow 3.0
 94 | base_secret_backend.get_connections()
    |
 help: Use `get_conn_value` instead
-
-ℹ Safe fix
-90 90 | 
-91 91 | # airflow.secrets.base_secrets
-92 92 | base_secret_backend = BaseSecretsBackend()
-93    |-base_secret_backend.get_conn_uri()
-   93 |+base_secret_backend.get_conn_value()
-94 94 | base_secret_backend.get_connections()
-95 95 | 
-96 96 | # airflow.secrets.local_filesystem
+90 | 
+91 | # airflow.secrets.base_secrets
+92 | base_secret_backend = BaseSecretsBackend()
+   - base_secret_backend.get_conn_uri()
+93 + base_secret_backend.get_conn_value()
+94 | base_secret_backend.get_connections()
+95 | 
+96 | # airflow.secrets.local_filesystem
 
 AIR301 [*] `get_connections` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:94:21
@@ -673,16 +613,14 @@ AIR301 [*] `get_connections` is removed in Airflow 3.0
 96 | # airflow.secrets.local_filesystem
    |
 help: Use `get_connection` instead
-
-ℹ Safe fix
-91 91 | # airflow.secrets.base_secrets
-92 92 | base_secret_backend = BaseSecretsBackend()
-93 93 | base_secret_backend.get_conn_uri()
-94    |-base_secret_backend.get_connections()
-   94 |+base_secret_backend.get_connection()
-95 95 | 
-96 96 | # airflow.secrets.local_filesystem
-97 97 | lfb = LocalFilesystemBackend()
+91 | # airflow.secrets.base_secrets
+92 | base_secret_backend = BaseSecretsBackend()
+93 | base_secret_backend.get_conn_uri()
+   - base_secret_backend.get_connections()
+94 + base_secret_backend.get_connection()
+95 | 
+96 | # airflow.secrets.local_filesystem
+97 | lfb = LocalFilesystemBackend()
 
 AIR301 [*] `get_connections` is removed in Airflow 3.0
   --> AIR301_class_attribute.py:98:5
@@ -693,10 +631,8 @@ AIR301 [*] `get_connections` is removed in Airflow 3.0
    |     ^^^^^^^^^^^^^^^
    |
 help: Use `get_connection` instead
-
-ℹ Safe fix
-95 95 | 
-96 96 | # airflow.secrets.local_filesystem
-97 97 | lfb = LocalFilesystemBackend()
-98    |-lfb.get_connections()
-   98 |+lfb.get_connection()
+95 | 
+96 | # airflow.secrets.local_filesystem
+97 | lfb = LocalFilesystemBackend()
+   - lfb.get_connections()
+98 + lfb.get_connection()

crates/ruff_linter/src/rules/airflow/snapshots/ruff_linter__rules__airflow__tests__AIR301_AIR301_context.py.snap

@@ -337,16 +337,14 @@ AIR301 [*] `schedule_interval` is removed in Airflow 3.0
 113 |     template_searchpath=["/templates"],
     |
 help: Use `schedule` instead
-
-ℹ Safe fix
-108 108 | 
-109 109 | with DAG(
-110 110 |     dag_id="example_dag",
-111     |-    schedule_interval="@daily",
-    111 |+    schedule="@daily",
-112 112 |     start_date=datetime(2023, 1, 1),
-113 113 |     template_searchpath=["/templates"],
-114 114 | ) as dag:
+108 | 
+109 | with DAG(
+110 |     dag_id="example_dag",
+    -     schedule_interval="@daily",
+111 +     schedule="@daily",
+112 |     start_date=datetime(2023, 1, 1),
+113 |     template_searchpath=["/templates"],
+114 | ) as dag:
 
 AIR301 `next_ds` is removed in Airflow 3.0
    --> AIR301_context.py:135:23

crates/ruff_linter/src/rules/airflow/snapshots/ruff_linter__rules__airflow__tests__AIR301_AIR301_names.py.snap

@@ -2,351 +2,362 @@
 source: crates/ruff_linter/src/rules/airflow/mod.rs
 ---
 AIR301 `airflow.PY36` is removed in Airflow 3.0
-  --> AIR301_names.py:39:1
+  --> AIR301_names.py:40:1
    |
-38 | # airflow root
-39 | PY36, PY37, PY38, PY39, PY310, PY311, PY312
+39 | # airflow root
+40 | PY36, PY37, PY38, PY39, PY310, PY311, PY312
    | ^^^^
-40 |
-41 | # airflow.api_connexion.security
+41 |
+42 | # airflow.api_connexion.security
    |
 help: Use `sys.version_info` instead
 
 AIR301 `airflow.PY37` is removed in Airflow 3.0
-  --> AIR301_names.py:39:7
+  --> AIR301_names.py:40:7
    |
-38 | # airflow root
-39 | PY36, PY37, PY38, PY39, PY310, PY311, PY312
+39 | # airflow root
+40 | PY36, PY37, PY38, PY39, PY310, PY311, PY312
    |       ^^^^
-40 |
-41 | # airflow.api_connexion.security
+41 |
+42 | # airflow.api_connexion.security
    |
 help: Use `sys.version_info` instead
 
 AIR301 `airflow.PY38` is removed in Airflow 3.0
-  --> AIR301_names.py:39:13
+  --> AIR301_names.py:40:13
    |
-38 | # airflow root
-39 | PY36, PY37, PY38, PY39, PY310, PY311, PY312
+39 | # airflow root
+40 | PY36, PY37, PY38, PY39, PY310, PY311, PY312
    |             ^^^^
-40 |
-41 | # airflow.api_connexion.security
+41 |
+42 | # airflow.api_connexion.security
    |
 help: Use `sys.version_info` instead
 
 AIR301 `airflow.PY39` is removed in Airflow 3.0
-  --> AIR301_names.py:39:19
+  --> AIR301_names.py:40:19
    |
-38 | # airflow root
-39 | PY36, PY37, PY38, PY39, PY310, PY311, PY312
+39 | # airflow root
+40 | PY36, PY37, PY38, PY39, PY310, PY311, PY312
    |                   ^^^^
-40 |
-41 | # airflow.api_connexion.security
+41 |
+42 | # airflow.api_connexion.security
    |
 help: Use `sys.version_info` instead
 
 AIR301 `airflow.PY310` is removed in Airflow 3.0
-  --> AIR301_names.py:39:25
+  --> AIR301_names.py:40:25
    |
-38 | # airflow root
-39 | PY36, PY37, PY38, PY39, PY310, PY311, PY312
+39 | # airflow root
+40 | PY36, PY37, PY38, PY39, PY310, PY311, PY312
    |                         ^^^^^
-40 |
-41 | # airflow.api_connexion.security
+41 |
+42 | # airflow.api_connexion.security
    |
 help: Use `sys.version_info` instead
 
 AIR301 `airflow.PY311` is removed in Airflow 3.0
-  --> AIR301_names.py:39:32
+  --> AIR301_names.py:40:32
    |
-38 | # airflow root
-39 | PY36, PY37, PY38, PY39, PY310, PY311, PY312
+39 | # airflow root
+40 | PY36, PY37, PY38, PY39, PY310, PY311, PY312
    |                                ^^^^^
-40 |
-41 | # airflow.api_connexion.security
+41 |
+42 | # airflow.api_connexion.security
    |
 help: Use `sys.version_info` instead
 
 AIR301 `airflow.PY312` is removed in Airflow 3.0
-  --> AIR301_names.py:39:39
+  --> AIR301_names.py:40:39
    |
-38 | # airflow root
-39 | PY36, PY37, PY38, PY39, PY310, PY311, PY312
+39 | # airflow root
+40 | PY36, PY37, PY38, PY39, PY310, PY311, PY312
    |                                       ^^^^^
-40 |
-41 | # airflow.api_connexion.security
+41 |
+42 | # airflow.api_connexion.security
    |
 help: Use `sys.version_info` instead
 
 AIR301 `airflow.api_connexion.security.requires_access` is removed in Airflow 3.0
-  --> AIR301_names.py:42:1
+  --> AIR301_names.py:43:1
    |
-41 | # airflow.api_connexion.security
-42 | requires_access
+42 | # airflow.api_connexion.security
+43 | requires_access
    | ^^^^^^^^^^^^^^^
-43 |
-44 | # airflow.contrib.*
+44 |
+45 | # airflow.contrib.*
    |
 help: Use `airflow.api_fastapi.core_api.security.requires_access_*` instead
 
 AIR301 `airflow.contrib.aws_athena_hook.AWSAthenaHook` is removed in Airflow 3.0
-  --> AIR301_names.py:45:1
+  --> AIR301_names.py:46:1
    |
-44 | # airflow.contrib.*
-45 | AWSAthenaHook()
+45 | # airflow.contrib.*
+46 | AWSAthenaHook()
    | ^^^^^^^^^^^^^
    |
 help: The whole `airflow.contrib` module has been removed.
 
 AIR301 `airflow.datasets.DatasetAliasEvent` is removed in Airflow 3.0
-  --> AIR301_names.py:49:1
+  --> AIR301_names.py:50:1
    |
-48 | # airflow.datasets
-49 | DatasetAliasEvent()
+49 | # airflow.datasets
+50 | DatasetAliasEvent()
    | ^^^^^^^^^^^^^^^^^
    |
 
 AIR301 `airflow.operators.subdag.SubDagOperator` is removed in Airflow 3.0
-  --> AIR301_names.py:53:1
+  --> AIR301_names.py:54:1
    |
-52 | # airflow.operators.subdag.*
-53 | SubDagOperator()
+53 | # airflow.operators.subdag.*
+54 | SubDagOperator()
    | ^^^^^^^^^^^^^^
+55 |
+56 | # airflow.operators.postgres_operator
    |
 help: The whole `airflow.subdag` module has been removed.
 
-AIR301 [*] `airflow.secrets.cache.SecretCache` is removed in Airflow 3.0
-  --> AIR301_names.py:61:1
+AIR301 `airflow.operators.postgres_operator.Mapping` is removed in Airflow 3.0
+  --> AIR301_names.py:57:1
    |
-60 | # airflow.secrets.cache
-61 | SecretCache()
+56 | # airflow.operators.postgres_operator
+57 | Mapping()
+   | ^^^^^^^
+58 |
+59 | # airflow.secrets
+   |
+
+AIR301 [*] `airflow.secrets.cache.SecretCache` is removed in Airflow 3.0
+  --> AIR301_names.py:64:1
+   |
+63 | # airflow.secrets.cache
+64 | SecretCache()
    | ^^^^^^^^^^^
    |
 help: Use `SecretCache` from `airflow.sdk` instead.
-
-ℹ Unsafe fix
-13 13 | from airflow.contrib.aws_athena_hook import AWSAthenaHook
-14 14 | from airflow.datasets import DatasetAliasEvent
-15 15 | from airflow.operators.subdag import SubDagOperator
-16    |-from airflow.secrets.cache import SecretCache
-17 16 | from airflow.secrets.local_filesystem import LocalFilesystemBackend
-18 17 | from airflow.triggers.external_task import TaskStateTrigger
-19 18 | from airflow.utils import dates
+14 | from airflow.datasets import DatasetAliasEvent
+15 | from airflow.operators.postgres_operator import Mapping
+16 | from airflow.operators.subdag import SubDagOperator
+   - from airflow.secrets.cache import SecretCache
+17 | from airflow.secrets.local_filesystem import LocalFilesystemBackend
+18 | from airflow.triggers.external_task import TaskStateTrigger
+19 | from airflow.utils import dates
 --------------------------------------------------------------------------------
-34 33 | from airflow.utils.trigger_rule import TriggerRule
-35 34 | from airflow.www.auth import has_access, has_access_dataset
-36 35 | from airflow.www.utils import get_sensitive_variables_fields, should_hide_value_for_key
-   36 |+from airflow.sdk import SecretCache
-37 37 | 
-38 38 | # airflow root
-39 39 | PY36, PY37, PY38, PY39, PY310, PY311, PY312
+34 | from airflow.utils.trigger_rule import TriggerRule
+35 | from airflow.www.auth import has_access, has_access_dataset
+36 | from airflow.www.utils import get_sensitive_variables_fields, should_hide_value_for_key
+37 + from airflow.sdk import SecretCache
+38 | 
+39 | # airflow root
+40 | PY36, PY37, PY38, PY39, PY310, PY311, PY312
+note: This is an unsafe fix and may change runtime behavior
 
 AIR301 `airflow.triggers.external_task.TaskStateTrigger` is removed in Airflow 3.0
-  --> AIR301_names.py:65:1
-   |
-64 | # airflow.triggers.external_task
-65 | TaskStateTrigger()
-   | ^^^^^^^^^^^^^^^^
-66 |
-67 | # airflow.utils.date
-   |
-
-AIR301 `airflow.utils.dates.date_range` is removed in Airflow 3.0
   --> AIR301_names.py:68:1
    |
-67 | # airflow.utils.date
-68 | dates.date_range
+67 | # airflow.triggers.external_task
+68 | TaskStateTrigger()
    | ^^^^^^^^^^^^^^^^
-69 | dates.days_ago
+69 |
+70 | # airflow.utils.date
    |
 
-AIR301 `airflow.utils.dates.days_ago` is removed in Airflow 3.0
-  --> AIR301_names.py:69:1
-   |
-67 | # airflow.utils.date
-68 | dates.date_range
-69 | dates.days_ago
-   | ^^^^^^^^^^^^^^
-70 |
-71 | date_range
-   |
-help: Use `pendulum.today('UTC').add(days=-N, ...)` instead
-
 AIR301 `airflow.utils.dates.date_range` is removed in Airflow 3.0
   --> AIR301_names.py:71:1
    |
-69 | dates.days_ago
-70 |
-71 | date_range
-   | ^^^^^^^^^^
-72 | days_ago
-73 | infer_time_unit
+70 | # airflow.utils.date
+71 | dates.date_range
+   | ^^^^^^^^^^^^^^^^
+72 | dates.days_ago
    |
 
 AIR301 `airflow.utils.dates.days_ago` is removed in Airflow 3.0
   --> AIR301_names.py:72:1
    |
-71 | date_range
-72 | days_ago
+70 | # airflow.utils.date
+71 | dates.date_range
+72 | dates.days_ago
+   | ^^^^^^^^^^^^^^
+73 |
+74 | date_range
+   |
+help: Use `pendulum.today('UTC').add(days=-N, ...)` instead
+
+AIR301 `airflow.utils.dates.date_range` is removed in Airflow 3.0
+  --> AIR301_names.py:74:1
+   |
+72 | dates.days_ago
+73 |
+74 | date_range
+   | ^^^^^^^^^^
+75 | days_ago
+76 | infer_time_unit
+   |
+
+AIR301 `airflow.utils.dates.days_ago` is removed in Airflow 3.0
+  --> AIR301_names.py:75:1
+   |
+74 | date_range
+75 | days_ago
    | ^^^^^^^^
-73 | infer_time_unit
-74 | parse_execution_date
+76 | infer_time_unit
+77 | parse_execution_date
    |
 help: Use `pendulum.today('UTC').add(days=-N, ...)` instead
 
 AIR301 `airflow.utils.dates.infer_time_unit` is removed in Airflow 3.0
-  --> AIR301_names.py:73:1
+  --> AIR301_names.py:76:1
    |
-71 | date_range
-72 | days_ago
-73 | infer_time_unit
+74 | date_range
+75 | days_ago
+76 | infer_time_unit
    | ^^^^^^^^^^^^^^^
-74 | parse_execution_date
-75 | round_time
+77 | parse_execution_date
+78 | round_time
    |
 
 AIR301 `airflow.utils.dates.parse_execution_date` is removed in Airflow 3.0
-  --> AIR301_names.py:74:1
+  --> AIR301_names.py:77:1
    |
-72 | days_ago
-73 | infer_time_unit
-74 | parse_execution_date
+75 | days_ago
+76 | infer_time_unit
+77 | parse_execution_date
    | ^^^^^^^^^^^^^^^^^^^^
-75 | round_time
-76 | scale_time_units
+78 | round_time
+79 | scale_time_units
    |
 
 AIR301 `airflow.utils.dates.round_time` is removed in Airflow 3.0
-  --> AIR301_names.py:75:1
+  --> AIR301_names.py:78:1
    |
-73 | infer_time_unit
-74 | parse_execution_date
-75 | round_time
+76 | infer_time_unit
+77 | parse_execution_date
+78 | round_time
    | ^^^^^^^^^^
-76 | scale_time_units
+79 | scale_time_units
    |
 
 AIR301 `airflow.utils.dates.scale_time_units` is removed in Airflow 3.0
-  --> AIR301_names.py:76:1
+  --> AIR301_names.py:79:1
    |
-74 | parse_execution_date
-75 | round_time
-76 | scale_time_units
+77 | parse_execution_date
+78 | round_time
+79 | scale_time_units
    | ^^^^^^^^^^^^^^^^
-77 |
-78 | # This one was not deprecated.
+80 |
+81 | # This one was not deprecated.
    |
 
 AIR301 `airflow.utils.dag_cycle_tester.test_cycle` is removed in Airflow 3.0
-  --> AIR301_names.py:83:1
+  --> AIR301_names.py:86:1
    |
-82 | # airflow.utils.dag_cycle_tester
-83 | test_cycle
+85 | # airflow.utils.dag_cycle_tester
+86 | test_cycle
    | ^^^^^^^^^^
    |
 
 AIR301 `airflow.utils.db.create_session` is removed in Airflow 3.0
-  --> AIR301_names.py:87:1
+  --> AIR301_names.py:90:1
    |
-86 | # airflow.utils.db
-87 | create_session
+89 | # airflow.utils.db
+90 | create_session
    | ^^^^^^^^^^^^^^
-88 |
-89 | # airflow.utils.decorators
+91 |
+92 | # airflow.utils.decorators
    |
 
 AIR301 `airflow.utils.decorators.apply_defaults` is removed in Airflow 3.0
-  --> AIR301_names.py:90:1
+  --> AIR301_names.py:93:1
    |
-89 | # airflow.utils.decorators
-90 | apply_defaults
+92 | # airflow.utils.decorators
+93 | apply_defaults
    | ^^^^^^^^^^^^^^
-91 |
-92 | # airflow.utils.file
+94 |
+95 | # airflow.utils.file
    |
 help: `apply_defaults` is now unconditionally done and can be safely removed.
 
 AIR301 `airflow.utils.file.mkdirs` is removed in Airflow 3.0
-  --> AIR301_names.py:93:1
+  --> AIR301_names.py:96:1
    |
-92 | # airflow.utils.file
-93 | mkdirs
+95 | # airflow.utils.file
+96 | mkdirs
    | ^^^^^^
    |
 help: Use `pathlib.Path({path}).mkdir` instead
 
 AIR301 `airflow.utils.state.SHUTDOWN` is removed in Airflow 3.0
-  --> AIR301_names.py:97:1
-   |
-96 | # airflow.utils.state
-97 | SHUTDOWN
-   | ^^^^^^^^
-98 | terminating_states
-   |
+   --> AIR301_names.py:100:1
+    |
+ 99 | # airflow.utils.state
+100 | SHUTDOWN
+    | ^^^^^^^^
+101 | terminating_states
+    |
 
 AIR301 `airflow.utils.state.terminating_states` is removed in Airflow 3.0
-   --> AIR301_names.py:98:1
+   --> AIR301_names.py:101:1
     |
- 96 | # airflow.utils.state
- 97 | SHUTDOWN
- 98 | terminating_states
+ 99 | # airflow.utils.state
+100 | SHUTDOWN
+101 | terminating_states
     | ^^^^^^^^^^^^^^^^^^
- 99 |
-100 | #  airflow.utils.trigger_rule
+102 |
+103 | #  airflow.utils.trigger_rule
     |
 
 AIR301 `airflow.utils.trigger_rule.TriggerRule.DUMMY` is removed in Airflow 3.0
-   --> AIR301_names.py:101:1
+   --> AIR301_names.py:104:1
     |
-100 | #  airflow.utils.trigger_rule
-101 | TriggerRule.DUMMY
+103 | #  airflow.utils.trigger_rule
+104 | TriggerRule.DUMMY
     | ^^^^^^^^^^^^^^^^^
-102 | TriggerRule.NONE_FAILED_OR_SKIPPED
+105 | TriggerRule.NONE_FAILED_OR_SKIPPED
     |
 
 AIR301 `airflow.utils.trigger_rule.TriggerRule.NONE_FAILED_OR_SKIPPED` is removed in Airflow 3.0
-   --> AIR301_names.py:102:1
+   --> AIR301_names.py:105:1
     |
-100 | #  airflow.utils.trigger_rule
-101 | TriggerRule.DUMMY
-102 | TriggerRule.NONE_FAILED_OR_SKIPPED
+103 | #  airflow.utils.trigger_rule
+104 | TriggerRule.DUMMY
+105 | TriggerRule.NONE_FAILED_OR_SKIPPED
     | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
     |
 
 AIR301 `airflow.www.auth.has_access` is removed in Airflow 3.0
-   --> AIR301_names.py:106:1
+   --> AIR301_names.py:109:1
     |
-105 | # airflow.www.auth
-106 | has_access
+108 | # airflow.www.auth
+109 | has_access
     | ^^^^^^^^^^
-107 | has_access_dataset
+110 | has_access_dataset
     |
 
 AIR301 `airflow.www.auth.has_access_dataset` is removed in Airflow 3.0
-   --> AIR301_names.py:107:1
+   --> AIR301_names.py:110:1
     |
-105 | # airflow.www.auth
-106 | has_access
-107 | has_access_dataset
+108 | # airflow.www.auth
+109 | has_access
+110 | has_access_dataset
     | ^^^^^^^^^^^^^^^^^^
-108 |
-109 | # airflow.www.utils
+111 |
+112 | # airflow.www.utils
     |
 
 AIR301 `airflow.www.utils.get_sensitive_variables_fields` is removed in Airflow 3.0
-   --> AIR301_names.py:110:1
+   --> AIR301_names.py:113:1
     |
-109 | # airflow.www.utils
-110 | get_sensitive_variables_fields
+112 | # airflow.www.utils
+113 | get_sensitive_variables_fields
     | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-111 | should_hide_value_for_key
+114 | should_hide_value_for_key
     |
 
 AIR301 `airflow.www.utils.should_hide_value_for_key` is removed in Airflow 3.0
-   --> AIR301_names.py:111:1
+   --> AIR301_names.py:114:1
     |
-109 | # airflow.www.utils
-110 | get_sensitive_variables_fields
-111 | should_hide_value_for_key
+112 | # airflow.www.utils
+113 | get_sensitive_variables_fields
+114 | should_hide_value_for_key
     | ^^^^^^^^^^^^^^^^^^^^^^^^^
     |

crates/ruff_linter/src/rules/airflow/snapshots/ruff_linter__rules__airflow__tests__AIR301_AIR301_provider_names_fix.py.snap

@@ -12,16 +12,14 @@ AIR301 [*] `airflow.providers.amazon.aws.auth_manager.avp.entities.AvpEntities.D
 13 | # airflow.providers.openlineage.utils.utils
    |
 help: Use `AvpEntities.ASSET` from `airflow.providers.amazon.aws.auth_manager.avp.entities` instead.
-
-ℹ Safe fix
-8  8  | from airflow.secrets.local_filesystem import load_connections
-9  9  | from airflow.security.permissions import RESOURCE_DATASET
-10 10 | 
-11    |-AvpEntities.DATASET
-   11 |+AvpEntities
-12 12 | 
-13 13 | # airflow.providers.openlineage.utils.utils
-14 14 | DatasetInfo()
+8  | from airflow.secrets.local_filesystem import load_connections
+9  | from airflow.security.permissions import RESOURCE_DATASET
+10 | 
+   - AvpEntities.DATASET
+11 + AvpEntities
+12 | 
+13 | # airflow.providers.openlineage.utils.utils
+14 | DatasetInfo()
 
 AIR301 [*] `airflow.providers.openlineage.utils.utils.DatasetInfo` is removed in Airflow 3.0
   --> AIR301_provider_names_fix.py:14:1
@@ -32,24 +30,22 @@ AIR301 [*] `airflow.providers.openlineage.utils.utils.DatasetInfo` is removed in
 15 | translate_airflow_dataset()
    |
 help: Use `AssetInfo` from `airflow.providers.openlineage.utils.utils` instead.
-
-ℹ Safe fix
-4  4  | from airflow.providers.openlineage.utils.utils import (
-5  5  |     DatasetInfo,
-6  6  |     translate_airflow_dataset,
-   7  |+AssetInfo,
-7  8  | )
-8  9  | from airflow.secrets.local_filesystem import load_connections
-9  10 | from airflow.security.permissions import RESOURCE_DATASET
+4  | from airflow.providers.openlineage.utils.utils import (
+5  |     DatasetInfo,
+6  |     translate_airflow_dataset,
+7  + AssetInfo,
+8  | )
+9  | from airflow.secrets.local_filesystem import load_connections
+10 | from airflow.security.permissions import RESOURCE_DATASET
 --------------------------------------------------------------------------------
-11 12 | AvpEntities.DATASET
-12 13 | 
-13 14 | # airflow.providers.openlineage.utils.utils
-14    |-DatasetInfo()
-   15 |+AssetInfo()
-15 16 | translate_airflow_dataset()
-16 17 | 
-17 18 | # airflow.secrets.local_filesystem
+12 | AvpEntities.DATASET
+13 | 
+14 | # airflow.providers.openlineage.utils.utils
+   - DatasetInfo()
+15 + AssetInfo()
+16 | translate_airflow_dataset()
+17 | 
+18 | # airflow.secrets.local_filesystem
 
 AIR301 [*] `airflow.providers.openlineage.utils.utils.translate_airflow_dataset` is removed in Airflow 3.0
   --> AIR301_provider_names_fix.py:15:1
@@ -62,24 +58,22 @@ AIR301 [*] `airflow.providers.openlineage.utils.utils.translate_airflow_dataset`
 17 | # airflow.secrets.local_filesystem
    |
 help: Use `translate_airflow_asset` from `airflow.providers.openlineage.utils.utils` instead.
-
-ℹ Safe fix
-4  4  | from airflow.providers.openlineage.utils.utils import (
-5  5  |     DatasetInfo,
-6  6  |     translate_airflow_dataset,
-   7  |+translate_airflow_asset,
-7  8  | )
-8  9  | from airflow.secrets.local_filesystem import load_connections
-9  10 | from airflow.security.permissions import RESOURCE_DATASET
+4  | from airflow.providers.openlineage.utils.utils import (
+5  |     DatasetInfo,
+6  |     translate_airflow_dataset,
+7  + translate_airflow_asset,
+8  | )
+9  | from airflow.secrets.local_filesystem import load_connections
+10 | from airflow.security.permissions import RESOURCE_DATASET
 --------------------------------------------------------------------------------
-12 13 | 
-13 14 | # airflow.providers.openlineage.utils.utils
-14 15 | DatasetInfo()
-15    |-translate_airflow_dataset()
-   16 |+translate_airflow_asset()
-16 17 | 
-17 18 | # airflow.secrets.local_filesystem
-18 19 | load_connections()
+13 | 
+14 | # airflow.providers.openlineage.utils.utils
+15 | DatasetInfo()
+   - translate_airflow_dataset()
+16 + translate_airflow_asset()
+17 | 
+18 | # airflow.secrets.local_filesystem
+19 | load_connections()
 
 AIR301 [*] `airflow.secrets.local_filesystem.load_connections` is removed in Airflow 3.0
   --> AIR301_provider_names_fix.py:18:1
@@ -91,25 +85,23 @@ AIR301 [*] `airflow.secrets.local_filesystem.load_connections` is removed in Air
 20 | # airflow.security.permissions
    |
 help: Use `load_connections_dict` from `airflow.secrets.local_filesystem` instead.
-
-ℹ Safe fix
-5  5  |     DatasetInfo,
-6  6  |     translate_airflow_dataset,
-7  7  | )
-8     |-from airflow.secrets.local_filesystem import load_connections
-   8  |+from airflow.secrets.local_filesystem import load_connections, load_connections_dict
-9  9  | from airflow.security.permissions import RESOURCE_DATASET
-10 10 | 
-11 11 | AvpEntities.DATASET
+5  |     DatasetInfo,
+6  |     translate_airflow_dataset,
+7  | )
+   - from airflow.secrets.local_filesystem import load_connections
+8  + from airflow.secrets.local_filesystem import load_connections, load_connections_dict
+9  | from airflow.security.permissions import RESOURCE_DATASET
+10 | 
+11 | AvpEntities.DATASET
 --------------------------------------------------------------------------------
-15 15 | translate_airflow_dataset()
-16 16 | 
-17 17 | # airflow.secrets.local_filesystem
-18    |-load_connections()
-   18 |+load_connections_dict()
-19 19 | 
-20 20 | # airflow.security.permissions
-21 21 | RESOURCE_DATASET
+15 | translate_airflow_dataset()
+16 | 
+17 | # airflow.secrets.local_filesystem
+   - load_connections()
+18 + load_connections_dict()
+19 | 
+20 | # airflow.security.permissions
+21 | RESOURCE_DATASET
 
 AIR301 [*] `airflow.security.permissions.RESOURCE_DATASET` is removed in Airflow 3.0
   --> AIR301_provider_names_fix.py:21:1
@@ -121,25 +113,23 @@ AIR301 [*] `airflow.security.permissions.RESOURCE_DATASET` is removed in Airflow
 23 | from airflow.providers.amazon.aws.datasets.s3 import (
    |
 help: Use `RESOURCE_ASSET` from `airflow.security.permissions` instead.
-
-ℹ Safe fix
-6  6  |     translate_airflow_dataset,
-7  7  | )
-8  8  | from airflow.secrets.local_filesystem import load_connections
-9     |-from airflow.security.permissions import RESOURCE_DATASET
-   9  |+from airflow.security.permissions import RESOURCE_DATASET, RESOURCE_ASSET
-10 10 | 
-11 11 | AvpEntities.DATASET
-12 12 | 
+6  |     translate_airflow_dataset,
+7  | )
+8  | from airflow.secrets.local_filesystem import load_connections
+   - from airflow.security.permissions import RESOURCE_DATASET
+9  + from airflow.security.permissions import RESOURCE_DATASET, RESOURCE_ASSET
+10 | 
+11 | AvpEntities.DATASET
+12 | 
 --------------------------------------------------------------------------------
-18 18 | load_connections()
-19 19 | 
-20 20 | # airflow.security.permissions
-21    |-RESOURCE_DATASET
-   21 |+RESOURCE_ASSET
-22 22 | 
-23 23 | from airflow.providers.amazon.aws.datasets.s3 import (
-24 24 |     convert_dataset_to_openlineage as s3_convert_dataset_to_openlineage,
+18 | load_connections()
+19 | 
+20 | # airflow.security.permissions
+   - RESOURCE_DATASET
+21 + RESOURCE_ASSET
+22 | 
+23 | from airflow.providers.amazon.aws.datasets.s3 import (
+24 |     convert_dataset_to_openlineage as s3_convert_dataset_to_openlineage,
 
 AIR301 [*] `airflow.providers.amazon.aws.datasets.s3.create_dataset` is removed in Airflow 3.0
   --> AIR301_provider_names_fix.py:28:1
@@ -151,18 +141,16 @@ AIR301 [*] `airflow.providers.amazon.aws.datasets.s3.create_dataset` is removed
 29 | s3_convert_dataset_to_openlineage()
    |
 help: Use `create_asset` from `airflow.providers.amazon.aws.assets.s3` instead.
-
-ℹ Safe fix
-24 24 |     convert_dataset_to_openlineage as s3_convert_dataset_to_openlineage,
-25 25 | )
-26 26 | from airflow.providers.amazon.aws.datasets.s3 import create_dataset as s3_create_dataset
-   27 |+from airflow.providers.amazon.aws.assets.s3 import create_asset
-27 28 | 
-28    |-s3_create_dataset()
-   29 |+create_asset()
-29 30 | s3_convert_dataset_to_openlineage()
-30 31 | 
-31 32 | from airflow.providers.common.io.dataset.file import (
+24 |     convert_dataset_to_openlineage as s3_convert_dataset_to_openlineage,
+25 | )
+26 | from airflow.providers.amazon.aws.datasets.s3 import create_dataset as s3_create_dataset
+27 + from airflow.providers.amazon.aws.assets.s3 import create_asset
+28 | 
+   - s3_create_dataset()
+29 + create_asset()
+30 | s3_convert_dataset_to_openlineage()
+31 | 
+32 | from airflow.providers.common.io.dataset.file import (
 
 AIR301 [*] `airflow.providers.amazon.aws.datasets.s3.convert_dataset_to_openlineage` is removed in Airflow 3.0
   --> AIR301_provider_names_fix.py:29:1
@@ -174,19 +162,17 @@ AIR301 [*] `airflow.providers.amazon.aws.datasets.s3.convert_dataset_to_openline
 31 | from airflow.providers.common.io.dataset.file import (
    |
 help: Use `convert_asset_to_openlineage` from `airflow.providers.amazon.aws.assets.s3` instead.
-
-ℹ Safe fix
-24 24 |     convert_dataset_to_openlineage as s3_convert_dataset_to_openlineage,
-25 25 | )
-26 26 | from airflow.providers.amazon.aws.datasets.s3 import create_dataset as s3_create_dataset
-   27 |+from airflow.providers.amazon.aws.assets.s3 import convert_asset_to_openlineage
-27 28 | 
-28 29 | s3_create_dataset()
-29    |-s3_convert_dataset_to_openlineage()
-   30 |+convert_asset_to_openlineage()
-30 31 | 
-31 32 | from airflow.providers.common.io.dataset.file import (
-32 33 |     convert_dataset_to_openlineage as io_convert_dataset_to_openlineage,
+24 |     convert_dataset_to_openlineage as s3_convert_dataset_to_openlineage,
+25 | )
+26 | from airflow.providers.amazon.aws.datasets.s3 import create_dataset as s3_create_dataset
+27 + from airflow.providers.amazon.aws.assets.s3 import convert_asset_to_openlineage
+28 | 
+29 | s3_create_dataset()
+   - s3_convert_dataset_to_openlineage()
+30 + convert_asset_to_openlineage()
+31 | 
+32 | from airflow.providers.common.io.dataset.file import (
+33 |     convert_dataset_to_openlineage as io_convert_dataset_to_openlineage,
 
 AIR301 [*] `airflow.providers.google.datasets.bigquery.create_dataset` is removed in Airflow 3.0
   --> AIR301_provider_names_fix.py:45:1
@@ -199,18 +185,16 @@ AIR301 [*] `airflow.providers.google.datasets.bigquery.create_dataset` is remove
 47 | # airflow.providers.google.datasets.gcs
    |
 help: Use `create_asset` from `airflow.providers.google.assets.bigquery` instead.
-
-ℹ Safe fix
-41 41 | from airflow.providers.google.datasets.bigquery import (
-42 42 |     create_dataset as bigquery_create_dataset,
-43 43 | )
-   44 |+from airflow.providers.google.assets.bigquery import create_asset
-44 45 | 
-45    |-bigquery_create_dataset()
-   46 |+create_asset()
-46 47 | 
-47 48 | # airflow.providers.google.datasets.gcs
-48 49 | from airflow.providers.google.datasets.gcs import (
+41 | from airflow.providers.google.datasets.bigquery import (
+42 |     create_dataset as bigquery_create_dataset,
+43 | )
+44 + from airflow.providers.google.assets.bigquery import create_asset
+45 | 
+   - bigquery_create_dataset()
+46 + create_asset()
+47 | 
+48 | # airflow.providers.google.datasets.gcs
+49 | from airflow.providers.google.datasets.gcs import (
 
 AIR301 [*] `airflow.providers.google.datasets.gcs.create_dataset` is removed in Airflow 3.0
   --> AIR301_provider_names_fix.py:53:1
@@ -222,16 +206,14 @@ AIR301 [*] `airflow.providers.google.datasets.gcs.create_dataset` is removed in
 54 | gcs_convert_dataset_to_openlineage()
    |
 help: Use `create_asset` from `airflow.providers.google.assets.gcs` instead.
-
-ℹ Safe fix
-49 49 |     convert_dataset_to_openlineage as gcs_convert_dataset_to_openlineage,
-50 50 | )
-51 51 | from airflow.providers.google.datasets.gcs import create_dataset as gcs_create_dataset
-   52 |+from airflow.providers.google.assets.gcs import create_asset
-52 53 | 
-53    |-gcs_create_dataset()
-   54 |+create_asset()
-54 55 | gcs_convert_dataset_to_openlineage()
+49 |     convert_dataset_to_openlineage as gcs_convert_dataset_to_openlineage,
+50 | )
+51 | from airflow.providers.google.datasets.gcs import create_dataset as gcs_create_dataset
+52 + from airflow.providers.google.assets.gcs import create_asset
+53 | 
+   - gcs_create_dataset()
+54 + create_asset()
+55 | gcs_convert_dataset_to_openlineage()
 
 AIR301 [*] `airflow.providers.google.datasets.gcs.convert_dataset_to_openlineage` is removed in Airflow 3.0
   --> AIR301_provider_names_fix.py:54:1
@@ -241,13 +223,11 @@ AIR301 [*] `airflow.providers.google.datasets.gcs.convert_dataset_to_openlineage
    | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    |
 help: Use `convert_asset_to_openlineage` from `airflow.providers.google.assets.gcs` instead.
-
-ℹ Safe fix
-49 49 |     convert_dataset_to_openlineage as gcs_convert_dataset_to_openlineage,
-50 50 | )
-51 51 | from airflow.providers.google.datasets.gcs import create_dataset as gcs_create_dataset
-   52 |+from airflow.providers.google.assets.gcs import convert_asset_to_openlineage
-52 53 | 
-53 54 | gcs_create_dataset()
-54    |-gcs_convert_dataset_to_openlineage()
-   55 |+convert_asset_to_openlineage()
+49 |     convert_dataset_to_openlineage as gcs_convert_dataset_to_openlineage,
+50 | )
+51 | from airflow.providers.google.datasets.gcs import create_dataset as gcs_create_dataset
+52 + from airflow.providers.google.assets.gcs import convert_asset_to_openlineage
+53 | 
+54 | gcs_create_dataset()
+   - gcs_convert_dataset_to_openlineage()
+55 + convert_asset_to_openlineage()

crates/ruff_linter/src/rules/airflow/snapshots/ruff_linter__rules__airflow__tests__AIR302_AIR302_amazon.py.snap

@@ -11,23 +11,22 @@ AIR302 [*] `airflow.hooks.S3_hook.S3Hook` is moved into `amazon` provider in Air
 15 | provide_bucket_name()
    |
 help: Install `apache-airflow-providers-amazon>=1.0.0` and use `S3Hook` from `airflow.providers.amazon.aws.hooks.s3` instead.
-
-ℹ Unsafe fix
-1  1  | from __future__ import annotations
-2  2  | 
-3  3  | from airflow.hooks.S3_hook import (
-4     |-    S3Hook,
-5  4  |     provide_bucket_name,
-6  5  | )
-7  6  | from airflow.operators.gcs_to_s3 import GCSToS3Operator
+1  | from __future__ import annotations
+2  | 
+3  | from airflow.hooks.S3_hook import (
+   -     S3Hook,
+4  |     provide_bucket_name,
+5  | )
+6  | from airflow.operators.gcs_to_s3 import GCSToS3Operator
 --------------------------------------------------------------------------------
-10 9  | from airflow.operators.s3_file_transform_operator import S3FileTransformOperator
-11 10 | from airflow.operators.s3_to_redshift_operator import S3ToRedshiftOperator
-12 11 | from airflow.sensors.s3_key_sensor import S3KeySensor
-   12 |+from airflow.providers.amazon.aws.hooks.s3 import S3Hook
-13 13 | 
-14 14 | S3Hook()
-15 15 | provide_bucket_name()
+9  | from airflow.operators.s3_file_transform_operator import S3FileTransformOperator
+10 | from airflow.operators.s3_to_redshift_operator import S3ToRedshiftOperator
+11 | from airflow.sensors.s3_key_sensor import S3KeySensor
+12 + from airflow.providers.amazon.aws.hooks.s3 import S3Hook
+13 | 
+14 | S3Hook()
+15 | provide_bucket_name()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.hooks.S3_hook.provide_bucket_name` is moved into `amazon` provider in Airflow 3.0;
   --> AIR302_amazon.py:15:1
@@ -39,23 +38,22 @@ AIR302 [*] `airflow.hooks.S3_hook.provide_bucket_name` is moved into `amazon` pr
 17 | GCSToS3Operator()
    |
 help: Install `apache-airflow-providers-amazon>=1.0.0` and use `provide_bucket_name` from `airflow.providers.amazon.aws.hooks.s3` instead.
-
-ℹ Unsafe fix
-2  2  | 
-3  3  | from airflow.hooks.S3_hook import (
-4  4  |     S3Hook,
-5     |-    provide_bucket_name,
-6  5  | )
-7  6  | from airflow.operators.gcs_to_s3 import GCSToS3Operator
-8  7  | from airflow.operators.google_api_to_s3_transfer import GoogleApiToS3Operator
+2  | 
+3  | from airflow.hooks.S3_hook import (
+4  |     S3Hook,
+   -     provide_bucket_name,
+5  | )
+6  | from airflow.operators.gcs_to_s3 import GCSToS3Operator
+7  | from airflow.operators.google_api_to_s3_transfer import GoogleApiToS3Operator
 --------------------------------------------------------------------------------
-10 9  | from airflow.operators.s3_file_transform_operator import S3FileTransformOperator
-11 10 | from airflow.operators.s3_to_redshift_operator import S3ToRedshiftOperator
-12 11 | from airflow.sensors.s3_key_sensor import S3KeySensor
-   12 |+from airflow.providers.amazon.aws.hooks.s3 import provide_bucket_name
-13 13 | 
-14 14 | S3Hook()
-15 15 | provide_bucket_name()
+9  | from airflow.operators.s3_file_transform_operator import S3FileTransformOperator
+10 | from airflow.operators.s3_to_redshift_operator import S3ToRedshiftOperator
+11 | from airflow.sensors.s3_key_sensor import S3KeySensor
+12 + from airflow.providers.amazon.aws.hooks.s3 import provide_bucket_name
+13 | 
+14 | S3Hook()
+15 | provide_bucket_name()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.gcs_to_s3.GCSToS3Operator` is moved into `amazon` provider in Airflow 3.0;
   --> AIR302_amazon.py:17:1
@@ -68,21 +66,20 @@ AIR302 [*] `airflow.operators.gcs_to_s3.GCSToS3Operator` is moved into `amazon`
 19 | RedshiftToS3Operator()
    |
 help: Install `apache-airflow-providers-amazon>=1.0.0` and use `GCSToS3Operator` from `airflow.providers.amazon.aws.transfers.gcs_to_s3` instead.
-
-ℹ Unsafe fix
-4  4  |     S3Hook,
-5  5  |     provide_bucket_name,
-6  6  | )
-7     |-from airflow.operators.gcs_to_s3 import GCSToS3Operator
-8  7  | from airflow.operators.google_api_to_s3_transfer import GoogleApiToS3Operator
-9  8  | from airflow.operators.redshift_to_s3_operator import RedshiftToS3Operator
-10 9  | from airflow.operators.s3_file_transform_operator import S3FileTransformOperator
-11 10 | from airflow.operators.s3_to_redshift_operator import S3ToRedshiftOperator
-12 11 | from airflow.sensors.s3_key_sensor import S3KeySensor
-   12 |+from airflow.providers.amazon.aws.transfers.gcs_to_s3 import GCSToS3Operator
-13 13 | 
-14 14 | S3Hook()
-15 15 | provide_bucket_name()
+4  |     S3Hook,
+5  |     provide_bucket_name,
+6  | )
+   - from airflow.operators.gcs_to_s3 import GCSToS3Operator
+7  | from airflow.operators.google_api_to_s3_transfer import GoogleApiToS3Operator
+8  | from airflow.operators.redshift_to_s3_operator import RedshiftToS3Operator
+9  | from airflow.operators.s3_file_transform_operator import S3FileTransformOperator
+10 | from airflow.operators.s3_to_redshift_operator import S3ToRedshiftOperator
+11 | from airflow.sensors.s3_key_sensor import S3KeySensor
+12 + from airflow.providers.amazon.aws.transfers.gcs_to_s3 import GCSToS3Operator
+13 | 
+14 | S3Hook()
+15 | provide_bucket_name()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.google_api_to_s3_transfer.GoogleApiToS3Operator` is moved into `amazon` provider in Airflow 3.0;
   --> AIR302_amazon.py:18:1
@@ -94,20 +91,19 @@ AIR302 [*] `airflow.operators.google_api_to_s3_transfer.GoogleApiToS3Operator` i
 20 | S3FileTransformOperator()
    |
 help: Install `apache-airflow-providers-amazon>=1.0.0` and use `GoogleApiToS3Operator` from `airflow.providers.amazon.aws.transfers.google_api_to_s3` instead.
-
-ℹ Unsafe fix
-5  5  |     provide_bucket_name,
-6  6  | )
-7  7  | from airflow.operators.gcs_to_s3 import GCSToS3Operator
-8     |-from airflow.operators.google_api_to_s3_transfer import GoogleApiToS3Operator
-9  8  | from airflow.operators.redshift_to_s3_operator import RedshiftToS3Operator
-10 9  | from airflow.operators.s3_file_transform_operator import S3FileTransformOperator
-11 10 | from airflow.operators.s3_to_redshift_operator import S3ToRedshiftOperator
-12 11 | from airflow.sensors.s3_key_sensor import S3KeySensor
-   12 |+from airflow.providers.amazon.aws.transfers.google_api_to_s3 import GoogleApiToS3Operator
-13 13 | 
-14 14 | S3Hook()
-15 15 | provide_bucket_name()
+5  |     provide_bucket_name,
+6  | )
+7  | from airflow.operators.gcs_to_s3 import GCSToS3Operator
+   - from airflow.operators.google_api_to_s3_transfer import GoogleApiToS3Operator
+8  | from airflow.operators.redshift_to_s3_operator import RedshiftToS3Operator
+9  | from airflow.operators.s3_file_transform_operator import S3FileTransformOperator
+10 | from airflow.operators.s3_to_redshift_operator import S3ToRedshiftOperator
+11 | from airflow.sensors.s3_key_sensor import S3KeySensor
+12 + from airflow.providers.amazon.aws.transfers.google_api_to_s3 import GoogleApiToS3Operator
+13 | 
+14 | S3Hook()
+15 | provide_bucket_name()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.redshift_to_s3_operator.RedshiftToS3Operator` is moved into `amazon` provider in Airflow 3.0;
   --> AIR302_amazon.py:19:1
@@ -120,19 +116,18 @@ AIR302 [*] `airflow.operators.redshift_to_s3_operator.RedshiftToS3Operator` is m
 21 | S3ToRedshiftOperator()
    |
 help: Install `apache-airflow-providers-amazon>=1.0.0` and use `RedshiftToS3Operator` from `airflow.providers.amazon.aws.transfers.redshift_to_s3` instead.
-
-ℹ Unsafe fix
-6  6  | )
-7  7  | from airflow.operators.gcs_to_s3 import GCSToS3Operator
-8  8  | from airflow.operators.google_api_to_s3_transfer import GoogleApiToS3Operator
-9     |-from airflow.operators.redshift_to_s3_operator import RedshiftToS3Operator
-10 9  | from airflow.operators.s3_file_transform_operator import S3FileTransformOperator
-11 10 | from airflow.operators.s3_to_redshift_operator import S3ToRedshiftOperator
-12 11 | from airflow.sensors.s3_key_sensor import S3KeySensor
-   12 |+from airflow.providers.amazon.aws.transfers.redshift_to_s3 import RedshiftToS3Operator
-13 13 | 
-14 14 | S3Hook()
-15 15 | provide_bucket_name()
+6  | )
+7  | from airflow.operators.gcs_to_s3 import GCSToS3Operator
+8  | from airflow.operators.google_api_to_s3_transfer import GoogleApiToS3Operator
+   - from airflow.operators.redshift_to_s3_operator import RedshiftToS3Operator
+9  | from airflow.operators.s3_file_transform_operator import S3FileTransformOperator
+10 | from airflow.operators.s3_to_redshift_operator import S3ToRedshiftOperator
+11 | from airflow.sensors.s3_key_sensor import S3KeySensor
+12 + from airflow.providers.amazon.aws.transfers.redshift_to_s3 import RedshiftToS3Operator
+13 | 
+14 | S3Hook()
+15 | provide_bucket_name()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.s3_file_transform_operator.S3FileTransformOperator` is moved into `amazon` provider in Airflow 3.0;
   --> AIR302_amazon.py:20:1
@@ -145,18 +140,17 @@ AIR302 [*] `airflow.operators.s3_file_transform_operator.S3FileTransformOperator
 22 | S3KeySensor()
    |
 help: Install `apache-airflow-providers-amazon>=3.0.0` and use `S3FileTransformOperator` from `airflow.providers.amazon.aws.operators.s3` instead.
-
-ℹ Unsafe fix
-7  7  | from airflow.operators.gcs_to_s3 import GCSToS3Operator
-8  8  | from airflow.operators.google_api_to_s3_transfer import GoogleApiToS3Operator
-9  9  | from airflow.operators.redshift_to_s3_operator import RedshiftToS3Operator
-10    |-from airflow.operators.s3_file_transform_operator import S3FileTransformOperator
-11 10 | from airflow.operators.s3_to_redshift_operator import S3ToRedshiftOperator
-12 11 | from airflow.sensors.s3_key_sensor import S3KeySensor
-   12 |+from airflow.providers.amazon.aws.operators.s3 import S3FileTransformOperator
-13 13 | 
-14 14 | S3Hook()
-15 15 | provide_bucket_name()
+7  | from airflow.operators.gcs_to_s3 import GCSToS3Operator
+8  | from airflow.operators.google_api_to_s3_transfer import GoogleApiToS3Operator
+9  | from airflow.operators.redshift_to_s3_operator import RedshiftToS3Operator
+   - from airflow.operators.s3_file_transform_operator import S3FileTransformOperator
+10 | from airflow.operators.s3_to_redshift_operator import S3ToRedshiftOperator
+11 | from airflow.sensors.s3_key_sensor import S3KeySensor
+12 + from airflow.providers.amazon.aws.operators.s3 import S3FileTransformOperator
+13 | 
+14 | S3Hook()
+15 | provide_bucket_name()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.s3_to_redshift_operator.S3ToRedshiftOperator` is moved into `amazon` provider in Airflow 3.0;
   --> AIR302_amazon.py:21:1
@@ -168,17 +162,16 @@ AIR302 [*] `airflow.operators.s3_to_redshift_operator.S3ToRedshiftOperator` is m
 22 | S3KeySensor()
    |
 help: Install `apache-airflow-providers-amazon>=1.0.0` and use `S3ToRedshiftOperator` from `airflow.providers.amazon.aws.transfers.s3_to_redshift` instead.
-
-ℹ Unsafe fix
-8  8  | from airflow.operators.google_api_to_s3_transfer import GoogleApiToS3Operator
-9  9  | from airflow.operators.redshift_to_s3_operator import RedshiftToS3Operator
-10 10 | from airflow.operators.s3_file_transform_operator import S3FileTransformOperator
-11    |-from airflow.operators.s3_to_redshift_operator import S3ToRedshiftOperator
-12 11 | from airflow.sensors.s3_key_sensor import S3KeySensor
-   12 |+from airflow.providers.amazon.aws.transfers.s3_to_redshift import S3ToRedshiftOperator
-13 13 | 
-14 14 | S3Hook()
-15 15 | provide_bucket_name()
+8  | from airflow.operators.google_api_to_s3_transfer import GoogleApiToS3Operator
+9  | from airflow.operators.redshift_to_s3_operator import RedshiftToS3Operator
+10 | from airflow.operators.s3_file_transform_operator import S3FileTransformOperator
+   - from airflow.operators.s3_to_redshift_operator import S3ToRedshiftOperator
+11 | from airflow.sensors.s3_key_sensor import S3KeySensor
+12 + from airflow.providers.amazon.aws.transfers.s3_to_redshift import S3ToRedshiftOperator
+13 | 
+14 | S3Hook()
+15 | provide_bucket_name()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.sensors.s3_key_sensor.S3KeySensor` is moved into `amazon` provider in Airflow 3.0;
   --> AIR302_amazon.py:22:1
@@ -191,16 +184,15 @@ AIR302 [*] `airflow.sensors.s3_key_sensor.S3KeySensor` is moved into `amazon` pr
 24 | from airflow.operators.google_api_to_s3_transfer import GoogleApiToS3Transfer
    |
 help: Install `apache-airflow-providers-amazon>=1.0.0` and use `S3KeySensor` from `airflow.providers.amazon.aws.sensors.s3` instead.
-
-ℹ Unsafe fix
-9  9  | from airflow.operators.redshift_to_s3_operator import RedshiftToS3Operator
-10 10 | from airflow.operators.s3_file_transform_operator import S3FileTransformOperator
-11 11 | from airflow.operators.s3_to_redshift_operator import S3ToRedshiftOperator
-12    |-from airflow.sensors.s3_key_sensor import S3KeySensor
-   12 |+from airflow.providers.amazon.aws.sensors.s3 import S3KeySensor
-13 13 | 
-14 14 | S3Hook()
-15 15 | provide_bucket_name()
+9  | from airflow.operators.redshift_to_s3_operator import RedshiftToS3Operator
+10 | from airflow.operators.s3_file_transform_operator import S3FileTransformOperator
+11 | from airflow.operators.s3_to_redshift_operator import S3ToRedshiftOperator
+   - from airflow.sensors.s3_key_sensor import S3KeySensor
+12 + from airflow.providers.amazon.aws.sensors.s3 import S3KeySensor
+13 | 
+14 | S3Hook()
+15 | provide_bucket_name()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.google_api_to_s3_transfer.GoogleApiToS3Transfer` is moved into `amazon` provider in Airflow 3.0;
   --> AIR302_amazon.py:26:1
@@ -213,15 +205,14 @@ AIR302 [*] `airflow.operators.google_api_to_s3_transfer.GoogleApiToS3Transfer` i
 28 | from airflow.operators.redshift_to_s3_operator import RedshiftToS3Transfer
    |
 help: Install `apache-airflow-providers-amazon>=1.0.0` and use `GoogleApiToS3Operator` from `airflow.providers.amazon.aws.transfers.google_api_to_s3` instead.
-
-ℹ Unsafe fix
-22 22 | S3KeySensor()
-23 23 | 
-24 24 | from airflow.operators.google_api_to_s3_transfer import GoogleApiToS3Transfer
-   25 |+from airflow.providers.amazon.aws.transfers.google_api_to_s3 import GoogleApiToS3Operator
-25 26 | 
-26 27 | GoogleApiToS3Transfer()
-27 28 | 
+22 | S3KeySensor()
+23 | 
+24 | from airflow.operators.google_api_to_s3_transfer import GoogleApiToS3Transfer
+25 + from airflow.providers.amazon.aws.transfers.google_api_to_s3 import GoogleApiToS3Operator
+26 | 
+27 | GoogleApiToS3Transfer()
+28 | 
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.redshift_to_s3_operator.RedshiftToS3Transfer` is moved into `amazon` provider in Airflow 3.0;
   --> AIR302_amazon.py:30:1
@@ -234,15 +225,14 @@ AIR302 [*] `airflow.operators.redshift_to_s3_operator.RedshiftToS3Transfer` is m
 32 | from airflow.operators.s3_to_redshift_operator import S3ToRedshiftTransfer
    |
 help: Install `apache-airflow-providers-amazon>=1.0.0` and use `RedshiftToS3Operator` from `airflow.providers.amazon.aws.transfers.redshift_to_s3` instead.
-
-ℹ Unsafe fix
-26 26 | GoogleApiToS3Transfer()
-27 27 | 
-28 28 | from airflow.operators.redshift_to_s3_operator import RedshiftToS3Transfer
-   29 |+from airflow.providers.amazon.aws.transfers.redshift_to_s3 import RedshiftToS3Operator
-29 30 | 
-30 31 | RedshiftToS3Transfer()
-31 32 | 
+26 | GoogleApiToS3Transfer()
+27 | 
+28 | from airflow.operators.redshift_to_s3_operator import RedshiftToS3Transfer
+29 + from airflow.providers.amazon.aws.transfers.redshift_to_s3 import RedshiftToS3Operator
+30 | 
+31 | RedshiftToS3Transfer()
+32 | 
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.s3_to_redshift_operator.S3ToRedshiftTransfer` is moved into `amazon` provider in Airflow 3.0;
   --> AIR302_amazon.py:34:1
@@ -253,11 +243,10 @@ AIR302 [*] `airflow.operators.s3_to_redshift_operator.S3ToRedshiftTransfer` is m
    | ^^^^^^^^^^^^^^^^^^^^
    |
 help: Install `apache-airflow-providers-amazon>=1.0.0` and use `S3ToRedshiftOperator` from `airflow.providers.amazon.aws.transfers.s3_to_redshift` instead.
-
-ℹ Unsafe fix
-30 30 | RedshiftToS3Transfer()
-31 31 | 
-32 32 | from airflow.operators.s3_to_redshift_operator import S3ToRedshiftTransfer
-   33 |+from airflow.providers.amazon.aws.transfers.s3_to_redshift import S3ToRedshiftOperator
-33 34 | 
-34 35 | S3ToRedshiftTransfer()
+30 | RedshiftToS3Transfer()
+31 | 
+32 | from airflow.operators.s3_to_redshift_operator import S3ToRedshiftTransfer
+33 + from airflow.providers.amazon.aws.transfers.s3_to_redshift import S3ToRedshiftOperator
+34 | 
+35 | S3ToRedshiftTransfer()
+note: This is an unsafe fix and may change runtime behavior

crates/ruff_linter/src/rules/airflow/snapshots/ruff_linter__rules__airflow__tests__AIR302_AIR302_celery.py.snap

@@ -12,19 +12,18 @@ AIR302 [*] `airflow.config_templates.default_celery.DEFAULT_CELERY_CONFIG` is mo
 11 | app
    |
 help: Install `apache-airflow-providers-celery>=3.3.0` and use `DEFAULT_CELERY_CONFIG` from `airflow.providers.celery.executors.default_celery` instead.
-
-ℹ Unsafe fix
-1 1 | from __future__ import annotations
-2 2 | 
-3   |-from airflow.config_templates.default_celery import DEFAULT_CELERY_CONFIG
-4 3 | from airflow.executors.celery_executor import (
-5 4 |     CeleryExecutor,
-6 5 |     app,
-7 6 | )
-  7 |+from airflow.providers.celery.executors.default_celery import DEFAULT_CELERY_CONFIG
-8 8 | 
-9 9 | DEFAULT_CELERY_CONFIG
-10 10 | 
+1  | from __future__ import annotations
+2  | 
+   - from airflow.config_templates.default_celery import DEFAULT_CELERY_CONFIG
+3  | from airflow.executors.celery_executor import (
+4  |     CeleryExecutor,
+5  |     app,
+6  | )
+7  + from airflow.providers.celery.executors.default_celery import DEFAULT_CELERY_CONFIG
+8  | 
+9  | DEFAULT_CELERY_CONFIG
+10 | 
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.executors.celery_executor.app` is moved into `celery` provider in Airflow 3.0;
   --> AIR302_celery.py:11:1
@@ -36,17 +35,16 @@ AIR302 [*] `airflow.executors.celery_executor.app` is moved into `celery` provid
 12 | CeleryExecutor()
    |
 help: Install `apache-airflow-providers-celery>=3.3.0` and use `app` from `airflow.providers.celery.executors.celery_executor_utils` instead.
-
-ℹ Unsafe fix
-3 3 | from airflow.config_templates.default_celery import DEFAULT_CELERY_CONFIG
-4 4 | from airflow.executors.celery_executor import (
-5 5 |     CeleryExecutor,
-6   |-    app,
-7 6 | )
-  7 |+from airflow.providers.celery.executors.celery_executor_utils import app
-8 8 | 
-9 9 | DEFAULT_CELERY_CONFIG
-10 10 | 
+3  | from airflow.config_templates.default_celery import DEFAULT_CELERY_CONFIG
+4  | from airflow.executors.celery_executor import (
+5  |     CeleryExecutor,
+   -     app,
+6  | )
+7  + from airflow.providers.celery.executors.celery_executor_utils import app
+8  | 
+9  | DEFAULT_CELERY_CONFIG
+10 | 
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.executors.celery_executor.CeleryExecutor` is moved into `celery` provider in Airflow 3.0;
   --> AIR302_celery.py:12:1
@@ -56,15 +54,14 @@ AIR302 [*] `airflow.executors.celery_executor.CeleryExecutor` is moved into `cel
    | ^^^^^^^^^^^^^^
    |
 help: Install `apache-airflow-providers-celery>=3.3.0` and use `CeleryExecutor` from `airflow.providers.celery.executors.celery_executor` instead.
-
-ℹ Unsafe fix
-2 2 | 
-3 3 | from airflow.config_templates.default_celery import DEFAULT_CELERY_CONFIG
-4 4 | from airflow.executors.celery_executor import (
-5   |-    CeleryExecutor,
-6 5 |     app,
-7 6 | )
-  7 |+from airflow.providers.celery.executors.celery_executor import CeleryExecutor
-8 8 | 
-9 9 | DEFAULT_CELERY_CONFIG
-10 10 |
+2  | 
+3  | from airflow.config_templates.default_celery import DEFAULT_CELERY_CONFIG
+4  | from airflow.executors.celery_executor import (
+   -     CeleryExecutor,
+5  |     app,
+6  | )
+7  + from airflow.providers.celery.executors.celery_executor import CeleryExecutor
+8  | 
+9  | DEFAULT_CELERY_CONFIG
+10 | 
+note: This is an unsafe fix and may change runtime behavior

crates/ruff_linter/src/rules/airflow/snapshots/ruff_linter__rules__airflow__tests__AIR302_AIR302_common_sql.py.snap

@@ -11,18 +11,17 @@ AIR302 [*] `airflow.hooks.dbapi.ConnectorProtocol` is moved into `common-sql` pr
 9 | DbApiHook()
   |
 help: Install `apache-airflow-providers-common-sql>=1.0.0` and use `ConnectorProtocol` from `airflow.providers.common.sql.hooks.sql` instead.
-
-ℹ Unsafe fix
-1 1 | from __future__ import annotations
-2 2 | 
-3 3 | from airflow.hooks.dbapi import (
-4   |-    ConnectorProtocol,
-5 4 |     DbApiHook,
-6 5 | )
-  6 |+from airflow.providers.common.sql.hooks.sql import ConnectorProtocol
-7 7 | 
-8 8 | ConnectorProtocol()
-9 9 | DbApiHook()
+1 | from __future__ import annotations
+2 | 
+3 | from airflow.hooks.dbapi import (
+  -     ConnectorProtocol,
+4 |     DbApiHook,
+5 | )
+6 + from airflow.providers.common.sql.hooks.sql import ConnectorProtocol
+7 | 
+8 | ConnectorProtocol()
+9 | DbApiHook()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.hooks.dbapi.DbApiHook` is moved into `common-sql` provider in Airflow 3.0;
   --> AIR302_common_sql.py:9:1
@@ -34,17 +33,16 @@ AIR302 [*] `airflow.hooks.dbapi.DbApiHook` is moved into `common-sql` provider i
 11 | from airflow.hooks.dbapi_hook import DbApiHook
    |
 help: Install `apache-airflow-providers-common-sql>=1.0.0` and use `DbApiHook` from `airflow.providers.common.sql.hooks.sql` instead.
-
-ℹ Unsafe fix
-2 2 | 
-3 3 | from airflow.hooks.dbapi import (
-4 4 |     ConnectorProtocol,
-5   |-    DbApiHook,
-6 5 | )
-  6 |+from airflow.providers.common.sql.hooks.sql import DbApiHook
-7 7 | 
-8 8 | ConnectorProtocol()
-9 9 | DbApiHook()
+2 | 
+3 | from airflow.hooks.dbapi import (
+4 |     ConnectorProtocol,
+  -     DbApiHook,
+5 | )
+6 + from airflow.providers.common.sql.hooks.sql import DbApiHook
+7 | 
+8 | ConnectorProtocol()
+9 | DbApiHook()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.hooks.dbapi_hook.DbApiHook` is moved into `common-sql` provider in Airflow 3.0;
   --> AIR302_common_sql.py:14:1
@@ -56,17 +54,16 @@ AIR302 [*] `airflow.hooks.dbapi_hook.DbApiHook` is moved into `common-sql` provi
 15 | SQLCheckOperator()
    |
 help: Install `apache-airflow-providers-common-sql>=1.0.0` and use `DbApiHook` from `airflow.providers.common.sql.hooks.sql` instead.
-
-ℹ Unsafe fix
-8  8  | ConnectorProtocol()
-9  9  | DbApiHook()
-10 10 | 
-11    |-from airflow.hooks.dbapi_hook import DbApiHook
-12 11 | from airflow.operators.check_operator import SQLCheckOperator
-   12 |+from airflow.providers.common.sql.hooks.sql import DbApiHook
-13 13 | 
-14 14 | DbApiHook()
-15 15 | SQLCheckOperator()
+8  | ConnectorProtocol()
+9  | DbApiHook()
+10 | 
+   - from airflow.hooks.dbapi_hook import DbApiHook
+11 | from airflow.operators.check_operator import SQLCheckOperator
+12 + from airflow.providers.common.sql.hooks.sql import DbApiHook
+13 | 
+14 | DbApiHook()
+15 | SQLCheckOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.check_operator.SQLCheckOperator` is moved into `common-sql` provider in Airflow 3.0;
   --> AIR302_common_sql.py:15:1
@@ -76,16 +73,15 @@ AIR302 [*] `airflow.operators.check_operator.SQLCheckOperator` is moved into `co
    | ^^^^^^^^^^^^^^^^
    |
 help: Install `apache-airflow-providers-common-sql>=1.1.0` and use `SQLCheckOperator` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-9  9  | DbApiHook()
-10 10 | 
-11 11 | from airflow.hooks.dbapi_hook import DbApiHook
-12    |-from airflow.operators.check_operator import SQLCheckOperator
-   12 |+from airflow.providers.common.sql.operators.sql import SQLCheckOperator
-13 13 | 
-14 14 | DbApiHook()
-15 15 | SQLCheckOperator()
+9  | DbApiHook()
+10 | 
+11 | from airflow.hooks.dbapi_hook import DbApiHook
+   - from airflow.operators.check_operator import SQLCheckOperator
+12 + from airflow.providers.common.sql.operators.sql import SQLCheckOperator
+13 | 
+14 | DbApiHook()
+15 | SQLCheckOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.sql.SQLCheckOperator` is moved into `common-sql` provider in Airflow 3.0;
   --> AIR302_common_sql.py:21:1
@@ -97,16 +93,15 @@ AIR302 [*] `airflow.operators.sql.SQLCheckOperator` is moved into `common-sql` p
 22 | CheckOperator()
    |
 help: Install `apache-airflow-providers-common-sql>=1.1.0` and use `SQLCheckOperator` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-16 16 | 
-17 17 | 
-18 18 | from airflow.operators.check_operator import CheckOperator
-19    |-from airflow.operators.sql import SQLCheckOperator
-   19 |+from airflow.providers.common.sql.operators.sql import SQLCheckOperator
-20 20 | 
-21 21 | SQLCheckOperator()
-22 22 | CheckOperator()
+16 | 
+17 | 
+18 | from airflow.operators.check_operator import CheckOperator
+   - from airflow.operators.sql import SQLCheckOperator
+19 + from airflow.providers.common.sql.operators.sql import SQLCheckOperator
+20 | 
+21 | SQLCheckOperator()
+22 | CheckOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.check_operator.CheckOperator` is moved into `common-sql` provider in Airflow 3.0;
   --> AIR302_common_sql.py:22:1
@@ -116,15 +111,14 @@ AIR302 [*] `airflow.operators.check_operator.CheckOperator` is moved into `commo
    | ^^^^^^^^^^^^^
    |
 help: Install `apache-airflow-providers-common-sql>=1.1.0` and use `SQLCheckOperator` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-17 17 | 
-18 18 | from airflow.operators.check_operator import CheckOperator
-19 19 | from airflow.operators.sql import SQLCheckOperator
-   20 |+from airflow.providers.common.sql.operators.sql import SQLCheckOperator
-20 21 | 
-21 22 | SQLCheckOperator()
-22 23 | CheckOperator()
+17 | 
+18 | from airflow.operators.check_operator import CheckOperator
+19 | from airflow.operators.sql import SQLCheckOperator
+20 + from airflow.providers.common.sql.operators.sql import SQLCheckOperator
+21 | 
+22 | SQLCheckOperator()
+23 | CheckOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.druid_check_operator.CheckOperator` is moved into `common-sql` provider in Airflow 3.0;
   --> AIR302_common_sql.py:27:1
@@ -135,15 +129,14 @@ AIR302 [*] `airflow.operators.druid_check_operator.CheckOperator` is moved into
    | ^^^^^^^^^^^^^
    |
 help: Install `apache-airflow-providers-common-sql>=1.1.0` and use `SQLCheckOperator` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-23 23 | 
-24 24 | 
-25 25 | from airflow.operators.druid_check_operator import CheckOperator
-   26 |+from airflow.providers.common.sql.operators.sql import SQLCheckOperator
-26 27 | 
-27 28 | CheckOperator()
-28 29 | 
+23 | 
+24 | 
+25 | from airflow.operators.druid_check_operator import CheckOperator
+26 + from airflow.providers.common.sql.operators.sql import SQLCheckOperator
+27 | 
+28 | CheckOperator()
+29 | 
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.presto_check_operator.CheckOperator` is moved into `common-sql` provider in Airflow 3.0;
   --> AIR302_common_sql.py:32:1
@@ -154,15 +147,14 @@ AIR302 [*] `airflow.operators.presto_check_operator.CheckOperator` is moved into
    | ^^^^^^^^^^^^^
    |
 help: Install `apache-airflow-providers-common-sql>=1.1.0` and use `SQLCheckOperator` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-28 28 | 
-29 29 | 
-30 30 | from airflow.operators.presto_check_operator import CheckOperator
-   31 |+from airflow.providers.common.sql.operators.sql import SQLCheckOperator
-31 32 | 
-32 33 | CheckOperator()
-33 34 | 
+28 | 
+29 | 
+30 | from airflow.operators.presto_check_operator import CheckOperator
+31 + from airflow.providers.common.sql.operators.sql import SQLCheckOperator
+32 | 
+33 | CheckOperator()
+34 | 
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.druid_check_operator.DruidCheckOperator` is moved into `common-sql` provider in Airflow 3.0;
   --> AIR302_common_sql.py:42:1
@@ -175,15 +167,14 @@ AIR302 [*] `airflow.operators.druid_check_operator.DruidCheckOperator` is moved
 44 | IntervalCheckOperator()
    |
 help: Install `apache-airflow-providers-common-sql>=1.1.0` and use `SQLCheckOperator` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-38 38 | )
-39 39 | from airflow.operators.druid_check_operator import DruidCheckOperator
-40 40 | from airflow.operators.presto_check_operator import PrestoCheckOperator
-   41 |+from airflow.providers.common.sql.operators.sql import SQLCheckOperator
-41 42 | 
-42 43 | DruidCheckOperator()
-43 44 | PrestoCheckOperator()
+38 | )
+39 | from airflow.operators.druid_check_operator import DruidCheckOperator
+40 | from airflow.operators.presto_check_operator import PrestoCheckOperator
+41 + from airflow.providers.common.sql.operators.sql import SQLCheckOperator
+42 | 
+43 | DruidCheckOperator()
+44 | PrestoCheckOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.presto_check_operator.PrestoCheckOperator` is moved into `common-sql` provider in Airflow 3.0;
   --> AIR302_common_sql.py:43:1
@@ -195,15 +186,14 @@ AIR302 [*] `airflow.operators.presto_check_operator.PrestoCheckOperator` is move
 45 | SQLIntervalCheckOperator()
    |
 help: Install `apache-airflow-providers-common-sql>=1.1.0` and use `SQLCheckOperator` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-38 38 | )
-39 39 | from airflow.operators.druid_check_operator import DruidCheckOperator
-40 40 | from airflow.operators.presto_check_operator import PrestoCheckOperator
-   41 |+from airflow.providers.common.sql.operators.sql import SQLCheckOperator
-41 42 | 
-42 43 | DruidCheckOperator()
-43 44 | PrestoCheckOperator()
+38 | )
+39 | from airflow.operators.druid_check_operator import DruidCheckOperator
+40 | from airflow.operators.presto_check_operator import PrestoCheckOperator
+41 + from airflow.providers.common.sql.operators.sql import SQLCheckOperator
+42 | 
+43 | DruidCheckOperator()
+44 | PrestoCheckOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.check_operator.IntervalCheckOperator` is moved into `common-sql` provider in Airflow 3.0;
   --> AIR302_common_sql.py:44:1
@@ -215,19 +205,18 @@ AIR302 [*] `airflow.operators.check_operator.IntervalCheckOperator` is moved int
 45 | SQLIntervalCheckOperator()
    |
 help: Install `apache-airflow-providers-common-sql>=1.1.0` and use `SQLIntervalCheckOperator` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-34 34 | 
-35 35 | from airflow.operators.check_operator import (
-36 36 |     IntervalCheckOperator,
-37    |-    SQLIntervalCheckOperator,
-38 37 | )
-39 38 | from airflow.operators.druid_check_operator import DruidCheckOperator
-40 39 | from airflow.operators.presto_check_operator import PrestoCheckOperator
-   40 |+from airflow.providers.common.sql.operators.sql import SQLIntervalCheckOperator
-41 41 | 
-42 42 | DruidCheckOperator()
-43 43 | PrestoCheckOperator()
+34 | 
+35 | from airflow.operators.check_operator import (
+36 |     IntervalCheckOperator,
+   -     SQLIntervalCheckOperator,
+37 | )
+38 | from airflow.operators.druid_check_operator import DruidCheckOperator
+39 | from airflow.operators.presto_check_operator import PrestoCheckOperator
+40 + from airflow.providers.common.sql.operators.sql import SQLIntervalCheckOperator
+41 | 
+42 | DruidCheckOperator()
+43 | PrestoCheckOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.check_operator.SQLIntervalCheckOperator` is moved into `common-sql` provider in Airflow 3.0;
   --> AIR302_common_sql.py:45:1
@@ -238,19 +227,18 @@ AIR302 [*] `airflow.operators.check_operator.SQLIntervalCheckOperator` is moved
    | ^^^^^^^^^^^^^^^^^^^^^^^^
    |
 help: Install `apache-airflow-providers-common-sql>=1.1.0` and use `SQLIntervalCheckOperator` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-34 34 | 
-35 35 | from airflow.operators.check_operator import (
-36 36 |     IntervalCheckOperator,
-37    |-    SQLIntervalCheckOperator,
-38 37 | )
-39 38 | from airflow.operators.druid_check_operator import DruidCheckOperator
-40 39 | from airflow.operators.presto_check_operator import PrestoCheckOperator
-   40 |+from airflow.providers.common.sql.operators.sql import SQLIntervalCheckOperator
-41 41 | 
-42 42 | DruidCheckOperator()
-43 43 | PrestoCheckOperator()
+34 | 
+35 | from airflow.operators.check_operator import (
+36 |     IntervalCheckOperator,
+   -     SQLIntervalCheckOperator,
+37 | )
+38 | from airflow.operators.druid_check_operator import DruidCheckOperator
+39 | from airflow.operators.presto_check_operator import PrestoCheckOperator
+40 + from airflow.providers.common.sql.operators.sql import SQLIntervalCheckOperator
+41 | 
+42 | DruidCheckOperator()
+43 | PrestoCheckOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.presto_check_operator.IntervalCheckOperator` is moved into `common-sql` provider in Airflow 3.0;
   --> AIR302_common_sql.py:54:1
@@ -263,15 +251,14 @@ AIR302 [*] `airflow.operators.presto_check_operator.IntervalCheckOperator` is mo
 56 | PrestoIntervalCheckOperator()
    |
 help: Install `apache-airflow-providers-common-sql>=1.1.0` and use `SQLIntervalCheckOperator` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-50 50 |     PrestoIntervalCheckOperator,
-51 51 | )
-52 52 | from airflow.operators.sql import SQLIntervalCheckOperator
-   53 |+from airflow.providers.common.sql.operators.sql import SQLIntervalCheckOperator
-53 54 | 
-54 55 | IntervalCheckOperator()
-55 56 | SQLIntervalCheckOperator()
+50 |     PrestoIntervalCheckOperator,
+51 | )
+52 | from airflow.operators.sql import SQLIntervalCheckOperator
+53 + from airflow.providers.common.sql.operators.sql import SQLIntervalCheckOperator
+54 | 
+55 | IntervalCheckOperator()
+56 | SQLIntervalCheckOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.sql.SQLIntervalCheckOperator` is moved into `common-sql` provider in Airflow 3.0;
   --> AIR302_common_sql.py:55:1
@@ -282,16 +269,15 @@ AIR302 [*] `airflow.operators.sql.SQLIntervalCheckOperator` is moved into `commo
 56 | PrestoIntervalCheckOperator()
    |
 help: Install `apache-airflow-providers-common-sql>=1.1.0` and use `SQLIntervalCheckOperator` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-49 49 |     IntervalCheckOperator,
-50 50 |     PrestoIntervalCheckOperator,
-51 51 | )
-52    |-from airflow.operators.sql import SQLIntervalCheckOperator
-   52 |+from airflow.providers.common.sql.operators.sql import SQLIntervalCheckOperator
-53 53 | 
-54 54 | IntervalCheckOperator()
-55 55 | SQLIntervalCheckOperator()
+49 |     IntervalCheckOperator,
+50 |     PrestoIntervalCheckOperator,
+51 | )
+   - from airflow.operators.sql import SQLIntervalCheckOperator
+52 + from airflow.providers.common.sql.operators.sql import SQLIntervalCheckOperator
+53 | 
+54 | IntervalCheckOperator()
+55 | SQLIntervalCheckOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.presto_check_operator.PrestoIntervalCheckOperator` is moved into `common-sql` provider in Airflow 3.0;
   --> AIR302_common_sql.py:56:1
@@ -302,15 +288,14 @@ AIR302 [*] `airflow.operators.presto_check_operator.PrestoIntervalCheckOperator`
    | ^^^^^^^^^^^^^^^^^^^^^^^^^^^
    |
 help: Install `apache-airflow-providers-common-sql>=1.1.0` and use `SQLIntervalCheckOperator` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-50 50 |     PrestoIntervalCheckOperator,
-51 51 | )
-52 52 | from airflow.operators.sql import SQLIntervalCheckOperator
-   53 |+from airflow.providers.common.sql.operators.sql import SQLIntervalCheckOperator
-53 54 | 
-54 55 | IntervalCheckOperator()
-55 56 | SQLIntervalCheckOperator()
+50 |     PrestoIntervalCheckOperator,
+51 | )
+52 | from airflow.operators.sql import SQLIntervalCheckOperator
+53 + from airflow.providers.common.sql.operators.sql import SQLIntervalCheckOperator
+54 | 
+55 | IntervalCheckOperator()
+56 | SQLIntervalCheckOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.check_operator.SQLThresholdCheckOperator` is moved into `common-sql` provider in Airflow 3.0;
   --> AIR302_common_sql.py:64:1
@@ -322,18 +307,17 @@ AIR302 [*] `airflow.operators.check_operator.SQLThresholdCheckOperator` is moved
 65 | ThresholdCheckOperator()
    |
 help: Install `apache-airflow-providers-common-sql>=1.1.0` and use `SQLThresholdCheckOperator` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-57 57 | 
-58 58 | 
-59 59 | from airflow.operators.check_operator import (
-60    |-    SQLThresholdCheckOperator,
-61 60 |     ThresholdCheckOperator,
-62 61 | )
-   62 |+from airflow.providers.common.sql.operators.sql import SQLThresholdCheckOperator
-63 63 | 
-64 64 | SQLThresholdCheckOperator()
-65 65 | ThresholdCheckOperator()
+57 | 
+58 | 
+59 | from airflow.operators.check_operator import (
+   -     SQLThresholdCheckOperator,
+60 |     ThresholdCheckOperator,
+61 | )
+62 + from airflow.providers.common.sql.operators.sql import SQLThresholdCheckOperator
+63 | 
+64 | SQLThresholdCheckOperator()
+65 | ThresholdCheckOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.check_operator.ThresholdCheckOperator` is moved into `common-sql` provider in Airflow 3.0;
   --> AIR302_common_sql.py:65:1
@@ -343,18 +327,17 @@ AIR302 [*] `airflow.operators.check_operator.ThresholdCheckOperator` is moved in
    | ^^^^^^^^^^^^^^^^^^^^^^
    |
 help: Install `apache-airflow-providers-common-sql>=1.1.0` and use `SQLThresholdCheckOperator` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-57 57 | 
-58 58 | 
-59 59 | from airflow.operators.check_operator import (
-60    |-    SQLThresholdCheckOperator,
-61 60 |     ThresholdCheckOperator,
-62 61 | )
-   62 |+from airflow.providers.common.sql.operators.sql import SQLThresholdCheckOperator
-63 63 | 
-64 64 | SQLThresholdCheckOperator()
-65 65 | ThresholdCheckOperator()
+57 | 
+58 | 
+59 | from airflow.operators.check_operator import (
+   -     SQLThresholdCheckOperator,
+60 |     ThresholdCheckOperator,
+61 | )
+62 + from airflow.providers.common.sql.operators.sql import SQLThresholdCheckOperator
+63 | 
+64 | SQLThresholdCheckOperator()
+65 | ThresholdCheckOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.sql.SQLThresholdCheckOperator` is moved into `common-sql` provider in Airflow 3.0;
   --> AIR302_common_sql.py:70:1
@@ -365,16 +348,15 @@ AIR302 [*] `airflow.operators.sql.SQLThresholdCheckOperator` is moved into `comm
    | ^^^^^^^^^^^^^^^^^^^^^^^^^
    |
 help: Install `apache-airflow-providers-common-sql>=1.1.0` and use `SQLThresholdCheckOperator` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-65 65 | ThresholdCheckOperator()
-66 66 | 
-67 67 | 
-68    |-from airflow.operators.sql import SQLThresholdCheckOperator
-   68 |+from airflow.providers.common.sql.operators.sql import SQLThresholdCheckOperator
-69 69 | 
-70 70 | SQLThresholdCheckOperator()
-71 71 | 
+65 | ThresholdCheckOperator()
+66 | 
+67 | 
+   - from airflow.operators.sql import SQLThresholdCheckOperator
+68 + from airflow.providers.common.sql.operators.sql import SQLThresholdCheckOperator
+69 | 
+70 | SQLThresholdCheckOperator()
+71 | 
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.check_operator.SQLValueCheckOperator` is moved into `common-sql` provider in Airflow 3.0;
   --> AIR302_common_sql.py:78:1
@@ -386,18 +368,17 @@ AIR302 [*] `airflow.operators.check_operator.SQLValueCheckOperator` is moved int
 79 | ValueCheckOperator()
    |
 help: Install `apache-airflow-providers-common-sql>=1.1.0` and use `SQLValueCheckOperator` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-71 71 | 
-72 72 | 
-73 73 | from airflow.operators.check_operator import (
-74    |-    SQLValueCheckOperator,
-75 74 |     ValueCheckOperator,
-76 75 | )
-   76 |+from airflow.providers.common.sql.operators.sql import SQLValueCheckOperator
-77 77 | 
-78 78 | SQLValueCheckOperator()
-79 79 | ValueCheckOperator()
+71 | 
+72 | 
+73 | from airflow.operators.check_operator import (
+   -     SQLValueCheckOperator,
+74 |     ValueCheckOperator,
+75 | )
+76 + from airflow.providers.common.sql.operators.sql import SQLValueCheckOperator
+77 | 
+78 | SQLValueCheckOperator()
+79 | ValueCheckOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.check_operator.ValueCheckOperator` is moved into `common-sql` provider in Airflow 3.0;
   --> AIR302_common_sql.py:79:1
@@ -407,18 +388,17 @@ AIR302 [*] `airflow.operators.check_operator.ValueCheckOperator` is moved into `
    | ^^^^^^^^^^^^^^^^^^
    |
 help: Install `apache-airflow-providers-common-sql>=1.1.0` and use `SQLValueCheckOperator` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-71 71 | 
-72 72 | 
-73 73 | from airflow.operators.check_operator import (
-74    |-    SQLValueCheckOperator,
-75 74 |     ValueCheckOperator,
-76 75 | )
-   76 |+from airflow.providers.common.sql.operators.sql import SQLValueCheckOperator
-77 77 | 
-78 78 | SQLValueCheckOperator()
-79 79 | ValueCheckOperator()
+71 | 
+72 | 
+73 | from airflow.operators.check_operator import (
+   -     SQLValueCheckOperator,
+74 |     ValueCheckOperator,
+75 | )
+76 + from airflow.providers.common.sql.operators.sql import SQLValueCheckOperator
+77 | 
+78 | SQLValueCheckOperator()
+79 | ValueCheckOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.sql.SQLValueCheckOperator` is moved into `common-sql` provider in Airflow 3.0;
   --> AIR302_common_sql.py:88:1
@@ -431,16 +411,15 @@ AIR302 [*] `airflow.operators.sql.SQLValueCheckOperator` is moved into `common-s
 90 | PrestoValueCheckOperator()
    |
 help: Install `apache-airflow-providers-common-sql>=1.1.0` and use `SQLValueCheckOperator` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-83 83 |     PrestoValueCheckOperator,
-84 84 |     ValueCheckOperator,
-85 85 | )
-86    |-from airflow.operators.sql import SQLValueCheckOperator
-   86 |+from airflow.providers.common.sql.operators.sql import SQLValueCheckOperator
-87 87 | 
-88 88 | SQLValueCheckOperator()
-89 89 | ValueCheckOperator()
+83 |     PrestoValueCheckOperator,
+84 |     ValueCheckOperator,
+85 | )
+   - from airflow.operators.sql import SQLValueCheckOperator
+86 + from airflow.providers.common.sql.operators.sql import SQLValueCheckOperator
+87 | 
+88 | SQLValueCheckOperator()
+89 | ValueCheckOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.presto_check_operator.ValueCheckOperator` is moved into `common-sql` provider in Airflow 3.0;
   --> AIR302_common_sql.py:89:1
@@ -451,15 +430,14 @@ AIR302 [*] `airflow.operators.presto_check_operator.ValueCheckOperator` is moved
 90 | PrestoValueCheckOperator()
    |
 help: Install `apache-airflow-providers-common-sql>=1.1.0` and use `SQLValueCheckOperator` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-84 84 |     ValueCheckOperator,
-85 85 | )
-86 86 | from airflow.operators.sql import SQLValueCheckOperator
-   87 |+from airflow.providers.common.sql.operators.sql import SQLValueCheckOperator
-87 88 | 
-88 89 | SQLValueCheckOperator()
-89 90 | ValueCheckOperator()
+84 |     ValueCheckOperator,
+85 | )
+86 | from airflow.operators.sql import SQLValueCheckOperator
+87 + from airflow.providers.common.sql.operators.sql import SQLValueCheckOperator
+88 | 
+89 | SQLValueCheckOperator()
+90 | ValueCheckOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.presto_check_operator.PrestoValueCheckOperator` is moved into `common-sql` provider in Airflow 3.0;
   --> AIR302_common_sql.py:90:1
@@ -470,15 +448,14 @@ AIR302 [*] `airflow.operators.presto_check_operator.PrestoValueCheckOperator` is
    | ^^^^^^^^^^^^^^^^^^^^^^^^
    |
 help: Install `apache-airflow-providers-common-sql>=1.1.0` and use `SQLValueCheckOperator` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-84 84 |     ValueCheckOperator,
-85 85 | )
-86 86 | from airflow.operators.sql import SQLValueCheckOperator
-   87 |+from airflow.providers.common.sql.operators.sql import SQLValueCheckOperator
-87 88 | 
-88 89 | SQLValueCheckOperator()
-89 90 | ValueCheckOperator()
+84 |     ValueCheckOperator,
+85 | )
+86 | from airflow.operators.sql import SQLValueCheckOperator
+87 + from airflow.providers.common.sql.operators.sql import SQLValueCheckOperator
+88 | 
+89 | SQLValueCheckOperator()
+90 | ValueCheckOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.sql.BaseSQLOperator` is moved into `common-sql` provider in Airflow 3.0;
    --> AIR302_common_sql.py:102:1
@@ -491,22 +468,21 @@ AIR302 [*] `airflow.operators.sql.BaseSQLOperator` is moved into `common-sql` pr
 104 | SQLTableCheckOperator()
     |
 help: Install `apache-airflow-providers-common-sql>=1.1.0` and use `BaseSQLOperator` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-91  91  | 
-92  92  | 
-93  93  | from airflow.operators.sql import (
-94      |-    BaseSQLOperator,
-95  94  |     BranchSQLOperator,
-96  95  |     SQLColumnCheckOperator,
-97  96  |     SQLTableCheckOperator,
-98  97  |     _convert_to_float_if_possible,
-99  98  |     parse_boolean,
-100 99  | )
-    100 |+from airflow.providers.common.sql.operators.sql import BaseSQLOperator
-101 101 | 
-102 102 | BaseSQLOperator()
-103 103 | BranchSQLOperator()
+91  | 
+92  | 
+93  | from airflow.operators.sql import (
+    -     BaseSQLOperator,
+94  |     BranchSQLOperator,
+95  |     SQLColumnCheckOperator,
+96  |     SQLTableCheckOperator,
+97  |     _convert_to_float_if_possible,
+98  |     parse_boolean,
+99  | )
+100 + from airflow.providers.common.sql.operators.sql import BaseSQLOperator
+101 | 
+102 | BaseSQLOperator()
+103 | BranchSQLOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.sql.BranchSQLOperator` is moved into `common-sql` provider in Airflow 3.0;
    --> AIR302_common_sql.py:103:1
@@ -518,21 +494,20 @@ AIR302 [*] `airflow.operators.sql.BranchSQLOperator` is moved into `common-sql`
 105 | SQLColumnCheckOperator()
     |
 help: Install `apache-airflow-providers-common-sql>=1.1.0` and use `BranchSQLOperator` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-92  92  | 
-93  93  | from airflow.operators.sql import (
-94  94  |     BaseSQLOperator,
-95      |-    BranchSQLOperator,
-96  95  |     SQLColumnCheckOperator,
-97  96  |     SQLTableCheckOperator,
-98  97  |     _convert_to_float_if_possible,
-99  98  |     parse_boolean,
-100 99  | )
-    100 |+from airflow.providers.common.sql.operators.sql import BranchSQLOperator
-101 101 | 
-102 102 | BaseSQLOperator()
-103 103 | BranchSQLOperator()
+92  | 
+93  | from airflow.operators.sql import (
+94  |     BaseSQLOperator,
+    -     BranchSQLOperator,
+95  |     SQLColumnCheckOperator,
+96  |     SQLTableCheckOperator,
+97  |     _convert_to_float_if_possible,
+98  |     parse_boolean,
+99  | )
+100 + from airflow.providers.common.sql.operators.sql import BranchSQLOperator
+101 | 
+102 | BaseSQLOperator()
+103 | BranchSQLOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.sql.SQLTableCheckOperator` is moved into `common-sql` provider in Airflow 3.0;
    --> AIR302_common_sql.py:104:1
@@ -545,19 +520,18 @@ AIR302 [*] `airflow.operators.sql.SQLTableCheckOperator` is moved into `common-s
 106 | _convert_to_float_if_possible()
     |
 help: Install `apache-airflow-providers-common-sql>=1.1.0` and use `SQLTableCheckOperator` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-94  94  |     BaseSQLOperator,
-95  95  |     BranchSQLOperator,
-96  96  |     SQLColumnCheckOperator,
-97      |-    SQLTableCheckOperator,
-98  97  |     _convert_to_float_if_possible,
-99  98  |     parse_boolean,
-100 99  | )
-    100 |+from airflow.providers.common.sql.operators.sql import SQLTableCheckOperator
-101 101 | 
-102 102 | BaseSQLOperator()
-103 103 | BranchSQLOperator()
+94  |     BaseSQLOperator,
+95  |     BranchSQLOperator,
+96  |     SQLColumnCheckOperator,
+    -     SQLTableCheckOperator,
+97  |     _convert_to_float_if_possible,
+98  |     parse_boolean,
+99  | )
+100 + from airflow.providers.common.sql.operators.sql import SQLTableCheckOperator
+101 | 
+102 | BaseSQLOperator()
+103 | BranchSQLOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.sql.SQLColumnCheckOperator` is moved into `common-sql` provider in Airflow 3.0;
    --> AIR302_common_sql.py:105:1
@@ -570,20 +544,19 @@ AIR302 [*] `airflow.operators.sql.SQLColumnCheckOperator` is moved into `common-
 107 | parse_boolean()
     |
 help: Install `apache-airflow-providers-common-sql>=1.0.0` and use `SQLColumnCheckOperator` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-93  93  | from airflow.operators.sql import (
-94  94  |     BaseSQLOperator,
-95  95  |     BranchSQLOperator,
-96      |-    SQLColumnCheckOperator,
-97  96  |     SQLTableCheckOperator,
-98  97  |     _convert_to_float_if_possible,
-99  98  |     parse_boolean,
-100 99  | )
-    100 |+from airflow.providers.common.sql.operators.sql import SQLColumnCheckOperator
-101 101 | 
-102 102 | BaseSQLOperator()
-103 103 | BranchSQLOperator()
+93  | from airflow.operators.sql import (
+94  |     BaseSQLOperator,
+95  |     BranchSQLOperator,
+    -     SQLColumnCheckOperator,
+96  |     SQLTableCheckOperator,
+97  |     _convert_to_float_if_possible,
+98  |     parse_boolean,
+99  | )
+100 + from airflow.providers.common.sql.operators.sql import SQLColumnCheckOperator
+101 | 
+102 | BaseSQLOperator()
+103 | BranchSQLOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.sql._convert_to_float_if_possible` is moved into `common-sql` provider in Airflow 3.0;
    --> AIR302_common_sql.py:106:1
@@ -595,18 +568,17 @@ AIR302 [*] `airflow.operators.sql._convert_to_float_if_possible` is moved into `
 107 | parse_boolean()
     |
 help: Install `apache-airflow-providers-common-sql>=1.0.0` and use `_convert_to_float_if_possible` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-95  95  |     BranchSQLOperator,
-96  96  |     SQLColumnCheckOperator,
-97  97  |     SQLTableCheckOperator,
-98      |-    _convert_to_float_if_possible,
-99  98  |     parse_boolean,
-100 99  | )
-    100 |+from airflow.providers.common.sql.operators.sql import _convert_to_float_if_possible
-101 101 | 
-102 102 | BaseSQLOperator()
-103 103 | BranchSQLOperator()
+95  |     BranchSQLOperator,
+96  |     SQLColumnCheckOperator,
+97  |     SQLTableCheckOperator,
+    -     _convert_to_float_if_possible,
+98  |     parse_boolean,
+99  | )
+100 + from airflow.providers.common.sql.operators.sql import _convert_to_float_if_possible
+101 | 
+102 | BaseSQLOperator()
+103 | BranchSQLOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.sql.parse_boolean` is moved into `common-sql` provider in Airflow 3.0;
    --> AIR302_common_sql.py:107:1
@@ -617,17 +589,16 @@ AIR302 [*] `airflow.operators.sql.parse_boolean` is moved into `common-sql` prov
     | ^^^^^^^^^^^^^
     |
 help: Install `apache-airflow-providers-common-sql>=1.0.0` and use `parse_boolean` from `airflow.providers.common.sql.operators.sql` instead.
-
-ℹ Unsafe fix
-96  96  |     SQLColumnCheckOperator,
-97  97  |     SQLTableCheckOperator,
-98  98  |     _convert_to_float_if_possible,
-99      |-    parse_boolean,
-100 99  | )
-    100 |+from airflow.providers.common.sql.operators.sql import parse_boolean
-101 101 | 
-102 102 | BaseSQLOperator()
-103 103 | BranchSQLOperator()
+96  |     SQLColumnCheckOperator,
+97  |     SQLTableCheckOperator,
+98  |     _convert_to_float_if_possible,
+    -     parse_boolean,
+99  | )
+100 + from airflow.providers.common.sql.operators.sql import parse_boolean
+101 | 
+102 | BaseSQLOperator()
+103 | BranchSQLOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.sensors.sql.SqlSensor` is moved into `common-sql` provider in Airflow 3.0;
    --> AIR302_common_sql.py:112:1
@@ -638,16 +609,15 @@ AIR302 [*] `airflow.sensors.sql.SqlSensor` is moved into `common-sql` provider i
     | ^^^^^^^^^
     |
 help: Install `apache-airflow-providers-common-sql>=1.0.0` and use `SqlSensor` from `airflow.providers.common.sql.sensors.sql` instead.
-
-ℹ Unsafe fix
-107 107 | parse_boolean()
-108 108 | 
-109 109 | 
-110     |-from airflow.sensors.sql import SqlSensor
-    110 |+from airflow.providers.common.sql.sensors.sql import SqlSensor
-111 111 | 
-112 112 | SqlSensor()
-113 113 | 
+107 | parse_boolean()
+108 | 
+109 | 
+    - from airflow.sensors.sql import SqlSensor
+110 + from airflow.providers.common.sql.sensors.sql import SqlSensor
+111 | 
+112 | SqlSensor()
+113 | 
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.sensors.sql_sensor.SqlSensor` is moved into `common-sql` provider in Airflow 3.0;
    --> AIR302_common_sql.py:117:1
@@ -658,13 +628,12 @@ AIR302 [*] `airflow.sensors.sql_sensor.SqlSensor` is moved into `common-sql` pro
     | ^^^^^^^^^
     |
 help: Install `apache-airflow-providers-common-sql>=1.0.0` and use `SqlSensor` from `airflow.providers.common.sql.sensors.sql` instead.
-
-ℹ Unsafe fix
-112 112 | SqlSensor()
-113 113 | 
-114 114 | 
-115     |-from airflow.sensors.sql_sensor import SqlSensor
-    115 |+from airflow.providers.common.sql.sensors.sql import SqlSensor
-116 116 | 
-117 117 | SqlSensor()
-118 118 |
+112 | SqlSensor()
+113 | 
+114 | 
+    - from airflow.sensors.sql_sensor import SqlSensor
+115 + from airflow.providers.common.sql.sensors.sql import SqlSensor
+116 | 
+117 | SqlSensor()
+118 | 
+note: This is an unsafe fix and may change runtime behavior

crates/ruff_linter/src/rules/airflow/snapshots/ruff_linter__rules__airflow__tests__AIR302_AIR302_daskexecutor.py.snap

@@ -10,11 +10,10 @@ AIR302 [*] `airflow.executors.dask_executor.DaskExecutor` is moved into `daskexe
   | ^^^^^^^^^^^^
   |
 help: Install `apache-airflow-providers-daskexecutor>=1.0.0` and use `DaskExecutor` from `airflow.providers.daskexecutor.executors.dask_executor` instead.
-
-ℹ Unsafe fix
-1 1 | from __future__ import annotations
-2 2 | 
-3   |-from airflow.executors.dask_executor import DaskExecutor
-  3 |+from airflow.providers.daskexecutor.executors.dask_executor import DaskExecutor
-4 4 | 
-5 5 | DaskExecutor()
+1 | from __future__ import annotations
+2 | 
+  - from airflow.executors.dask_executor import DaskExecutor
+3 + from airflow.providers.daskexecutor.executors.dask_executor import DaskExecutor
+4 | 
+5 | DaskExecutor()
+note: This is an unsafe fix and may change runtime behavior

crates/ruff_linter/src/rules/airflow/snapshots/ruff_linter__rules__airflow__tests__AIR302_AIR302_druid.py.snap

@@ -11,22 +11,21 @@ AIR302 [*] `airflow.hooks.druid_hook.DruidDbApiHook` is moved into `apache-druid
 13 | DruidHook()
    |
 help: Install `apache-airflow-providers-apache-druid>=1.0.0` and use `DruidDbApiHook` from `airflow.providers.apache.druid.hooks.druid` instead.
-
-ℹ Unsafe fix
-1  1  | from __future__ import annotations
-2  2  | 
-3  3  | from airflow.hooks.druid_hook import (
-4     |-    DruidDbApiHook,
-5  4  |     DruidHook,
-6  5  | )
-7  6  | from airflow.operators.hive_to_druid import (
-8  7  |     HiveToDruidOperator,
-9  8  |     HiveToDruidTransfer,
-10 9  | )
-   10 |+from airflow.providers.apache.druid.hooks.druid import DruidDbApiHook
-11 11 | 
-12 12 | DruidDbApiHook()
-13 13 | DruidHook()
+1  | from __future__ import annotations
+2  | 
+3  | from airflow.hooks.druid_hook import (
+   -     DruidDbApiHook,
+4  |     DruidHook,
+5  | )
+6  | from airflow.operators.hive_to_druid import (
+7  |     HiveToDruidOperator,
+8  |     HiveToDruidTransfer,
+9  | )
+10 + from airflow.providers.apache.druid.hooks.druid import DruidDbApiHook
+11 | 
+12 | DruidDbApiHook()
+13 | DruidHook()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.hooks.druid_hook.DruidHook` is moved into `apache-druid` provider in Airflow 3.0;
   --> AIR302_druid.py:13:1
@@ -38,21 +37,20 @@ AIR302 [*] `airflow.hooks.druid_hook.DruidHook` is moved into `apache-druid` pro
 15 | HiveToDruidOperator()
    |
 help: Install `apache-airflow-providers-apache-druid>=1.0.0` and use `DruidHook` from `airflow.providers.apache.druid.hooks.druid` instead.
-
-ℹ Unsafe fix
-2  2  | 
-3  3  | from airflow.hooks.druid_hook import (
-4  4  |     DruidDbApiHook,
-5     |-    DruidHook,
-6  5  | )
-7  6  | from airflow.operators.hive_to_druid import (
-8  7  |     HiveToDruidOperator,
-9  8  |     HiveToDruidTransfer,
-10 9  | )
-   10 |+from airflow.providers.apache.druid.hooks.druid import DruidHook
-11 11 | 
-12 12 | DruidDbApiHook()
-13 13 | DruidHook()
+2  | 
+3  | from airflow.hooks.druid_hook import (
+4  |     DruidDbApiHook,
+   -     DruidHook,
+5  | )
+6  | from airflow.operators.hive_to_druid import (
+7  |     HiveToDruidOperator,
+8  |     HiveToDruidTransfer,
+9  | )
+10 + from airflow.providers.apache.druid.hooks.druid import DruidHook
+11 | 
+12 | DruidDbApiHook()
+13 | DruidHook()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.hive_to_druid.HiveToDruidOperator` is moved into `apache-druid` provider in Airflow 3.0;
   --> AIR302_druid.py:15:1
@@ -64,18 +62,17 @@ AIR302 [*] `airflow.operators.hive_to_druid.HiveToDruidOperator` is moved into `
 16 | HiveToDruidTransfer()
    |
 help: Install `apache-airflow-providers-apache-druid>=1.0.0` and use `HiveToDruidOperator` from `airflow.providers.apache.druid.transfers.hive_to_druid` instead.
-
-ℹ Unsafe fix
-5  5  |     DruidHook,
-6  6  | )
-7  7  | from airflow.operators.hive_to_druid import (
-8     |-    HiveToDruidOperator,
-9  8  |     HiveToDruidTransfer,
-10 9  | )
-   10 |+from airflow.providers.apache.druid.transfers.hive_to_druid import HiveToDruidOperator
-11 11 | 
-12 12 | DruidDbApiHook()
-13 13 | DruidHook()
+5  |     DruidHook,
+6  | )
+7  | from airflow.operators.hive_to_druid import (
+   -     HiveToDruidOperator,
+8  |     HiveToDruidTransfer,
+9  | )
+10 + from airflow.providers.apache.druid.transfers.hive_to_druid import HiveToDruidOperator
+11 | 
+12 | DruidDbApiHook()
+13 | DruidHook()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.hive_to_druid.HiveToDruidTransfer` is moved into `apache-druid` provider in Airflow 3.0;
   --> AIR302_druid.py:16:1
@@ -85,15 +82,14 @@ AIR302 [*] `airflow.operators.hive_to_druid.HiveToDruidTransfer` is moved into `
    | ^^^^^^^^^^^^^^^^^^^
    |
 help: Install `apache-airflow-providers-apache-druid>=1.0.0` and use `HiveToDruidOperator` from `airflow.providers.apache.druid.transfers.hive_to_druid` instead.
-
-ℹ Unsafe fix
-5  5  |     DruidHook,
-6  6  | )
-7  7  | from airflow.operators.hive_to_druid import (
-8     |-    HiveToDruidOperator,
-9  8  |     HiveToDruidTransfer,
-10 9  | )
-   10 |+from airflow.providers.apache.druid.transfers.hive_to_druid import HiveToDruidOperator
-11 11 | 
-12 12 | DruidDbApiHook()
-13 13 | DruidHook()
+5  |     DruidHook,
+6  | )
+7  | from airflow.operators.hive_to_druid import (
+   -     HiveToDruidOperator,
+8  |     HiveToDruidTransfer,
+9  | )
+10 + from airflow.providers.apache.druid.transfers.hive_to_druid import HiveToDruidOperator
+11 | 
+12 | DruidDbApiHook()
+13 | DruidHook()
+note: This is an unsafe fix and may change runtime behavior

crates/ruff_linter/src/rules/airflow/snapshots/ruff_linter__rules__airflow__tests__AIR302_AIR302_fab.py.snap

@@ -12,20 +12,19 @@ AIR302 [*] `airflow.api.auth.backend.basic_auth.CLIENT_AUTH` is moved into `fab`
 12 | auth_current_user()
    |
 help: Install `apache-airflow-providers-fab>=1.0.0` and use `CLIENT_AUTH` from `airflow.providers.fab.auth_manager.api.auth.backend.basic_auth` instead.
-
-ℹ Unsafe fix
-1 1 | from __future__ import annotations
-2 2 | 
-3 3 | from airflow.api.auth.backend.basic_auth import (
-4   |-    CLIENT_AUTH,
-5 4 |     auth_current_user,
-6 5 |     init_app,
-7 6 |     requires_authentication,
-8 7 | )
-  8 |+from airflow.providers.fab.auth_manager.api.auth.backend.basic_auth import CLIENT_AUTH
-9 9 | 
-10 10 | CLIENT_AUTH
-11 11 | init_app()
+1  | from __future__ import annotations
+2  | 
+3  | from airflow.api.auth.backend.basic_auth import (
+   -     CLIENT_AUTH,
+4  |     auth_current_user,
+5  |     init_app,
+6  |     requires_authentication,
+7  | )
+8  + from airflow.providers.fab.auth_manager.api.auth.backend.basic_auth import CLIENT_AUTH
+9  | 
+10 | CLIENT_AUTH
+11 | init_app()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.api.auth.backend.basic_auth.init_app` is moved into `fab` provider in Airflow 3.0;
   --> AIR302_fab.py:11:1
@@ -37,18 +36,17 @@ AIR302 [*] `airflow.api.auth.backend.basic_auth.init_app` is moved into `fab` pr
 13 | requires_authentication()
    |
 help: Install `apache-airflow-providers-fab>=1.0.0` and use `init_app` from `airflow.providers.fab.auth_manager.api.auth.backend.basic_auth` instead.
-
-ℹ Unsafe fix
-3 3 | from airflow.api.auth.backend.basic_auth import (
-4 4 |     CLIENT_AUTH,
-5 5 |     auth_current_user,
-6   |-    init_app,
-7 6 |     requires_authentication,
-8 7 | )
-  8 |+from airflow.providers.fab.auth_manager.api.auth.backend.basic_auth import init_app
-9 9 | 
-10 10 | CLIENT_AUTH
-11 11 | init_app()
+3  | from airflow.api.auth.backend.basic_auth import (
+4  |     CLIENT_AUTH,
+5  |     auth_current_user,
+   -     init_app,
+6  |     requires_authentication,
+7  | )
+8  + from airflow.providers.fab.auth_manager.api.auth.backend.basic_auth import init_app
+9  | 
+10 | CLIENT_AUTH
+11 | init_app()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.api.auth.backend.basic_auth.auth_current_user` is moved into `fab` provider in Airflow 3.0;
   --> AIR302_fab.py:12:1
@@ -60,19 +58,18 @@ AIR302 [*] `airflow.api.auth.backend.basic_auth.auth_current_user` is moved into
 13 | requires_authentication()
    |
 help: Install `apache-airflow-providers-fab>=1.0.0` and use `auth_current_user` from `airflow.providers.fab.auth_manager.api.auth.backend.basic_auth` instead.
-
-ℹ Unsafe fix
-2 2 | 
-3 3 | from airflow.api.auth.backend.basic_auth import (
-4 4 |     CLIENT_AUTH,
-5   |-    auth_current_user,
-6 5 |     init_app,
-7 6 |     requires_authentication,
-8 7 | )
-  8 |+from airflow.providers.fab.auth_manager.api.auth.backend.basic_auth import auth_current_user
-9 9 | 
-10 10 | CLIENT_AUTH
-11 11 | init_app()
+2  | 
+3  | from airflow.api.auth.backend.basic_auth import (
+4  |     CLIENT_AUTH,
+   -     auth_current_user,
+5  |     init_app,
+6  |     requires_authentication,
+7  | )
+8  + from airflow.providers.fab.auth_manager.api.auth.backend.basic_auth import auth_current_user
+9  | 
+10 | CLIENT_AUTH
+11 | init_app()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.api.auth.backend.basic_auth.requires_authentication` is moved into `fab` provider in Airflow 3.0;
   --> AIR302_fab.py:13:1
@@ -85,17 +82,16 @@ AIR302 [*] `airflow.api.auth.backend.basic_auth.requires_authentication` is move
 15 | from airflow.api.auth.backend.kerberos_auth import (
    |
 help: Install `apache-airflow-providers-fab>=1.0.0` and use `requires_authentication` from `airflow.providers.fab.auth_manager.api.auth.backend.basic_auth` instead.
-
-ℹ Unsafe fix
-4 4 |     CLIENT_AUTH,
-5 5 |     auth_current_user,
-6 6 |     init_app,
-7   |-    requires_authentication,
-8 7 | )
-  8 |+from airflow.providers.fab.auth_manager.api.auth.backend.basic_auth import requires_authentication
-9 9 | 
-10 10 | CLIENT_AUTH
-11 11 | init_app()
+4  |     CLIENT_AUTH,
+5  |     auth_current_user,
+6  |     init_app,
+   -     requires_authentication,
+7  | )
+8  + from airflow.providers.fab.auth_manager.api.auth.backend.basic_auth import requires_authentication
+9  | 
+10 | CLIENT_AUTH
+11 | init_app()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.api.auth.backend.kerberos_auth.log` is moved into `fab` provider in Airflow 3.0;
   --> AIR302_fab.py:23:1
@@ -108,18 +104,17 @@ AIR302 [*] `airflow.api.auth.backend.kerberos_auth.log` is moved into `fab` prov
 25 | find_user()
    |
 help: Install `apache-airflow-providers-fab>=1.0.0` and use `log` from `airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth` instead.
-
-ℹ Unsafe fix
-16 16 |     CLIENT_AUTH,
-17 17 |     find_user,
-18 18 |     init_app,
-19    |-    log,
-20 19 |     requires_authentication,
-21 20 | )
-   21 |+from airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth import log
-22 22 | 
-23 23 | log()
-24 24 | CLIENT_AUTH
+16 |     CLIENT_AUTH,
+17 |     find_user,
+18 |     init_app,
+   -     log,
+19 |     requires_authentication,
+20 | )
+21 + from airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth import log
+22 | 
+23 | log()
+24 | CLIENT_AUTH
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.api.auth.backend.kerberos_auth.CLIENT_AUTH` is moved into `fab` provider in Airflow 3.0;
   --> AIR302_fab.py:24:1
@@ -131,21 +126,20 @@ AIR302 [*] `airflow.api.auth.backend.kerberos_auth.CLIENT_AUTH` is moved into `f
 26 | init_app()
    |
 help: Install `apache-airflow-providers-fab>=1.0.0` and use `CLIENT_AUTH` from `airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth` instead.
-
-ℹ Unsafe fix
-13 13 | requires_authentication()
-14 14 | 
-15 15 | from airflow.api.auth.backend.kerberos_auth import (
-16    |-    CLIENT_AUTH,
-17 16 |     find_user,
-18 17 |     init_app,
-19 18 |     log,
-20 19 |     requires_authentication,
-21 20 | )
-   21 |+from airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth import CLIENT_AUTH
-22 22 | 
-23 23 | log()
-24 24 | CLIENT_AUTH
+13 | requires_authentication()
+14 | 
+15 | from airflow.api.auth.backend.kerberos_auth import (
+   -     CLIENT_AUTH,
+16 |     find_user,
+17 |     init_app,
+18 |     log,
+19 |     requires_authentication,
+20 | )
+21 + from airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth import CLIENT_AUTH
+22 | 
+23 | log()
+24 | CLIENT_AUTH
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.api.auth.backend.kerberos_auth.find_user` is moved into `fab` provider in Airflow 3.0;
   --> AIR302_fab.py:25:1
@@ -158,20 +152,19 @@ AIR302 [*] `airflow.api.auth.backend.kerberos_auth.find_user` is moved into `fab
 27 | requires_authentication()
    |
 help: Install `apache-airflow-providers-fab>=1.0.0` and use `find_user` from `airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth` instead.
-
-ℹ Unsafe fix
-14 14 | 
-15 15 | from airflow.api.auth.backend.kerberos_auth import (
-16 16 |     CLIENT_AUTH,
-17    |-    find_user,
-18 17 |     init_app,
-19 18 |     log,
-20 19 |     requires_authentication,
-21 20 | )
-   21 |+from airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth import find_user
-22 22 | 
-23 23 | log()
-24 24 | CLIENT_AUTH
+14 | 
+15 | from airflow.api.auth.backend.kerberos_auth import (
+16 |     CLIENT_AUTH,
+   -     find_user,
+17 |     init_app,
+18 |     log,
+19 |     requires_authentication,
+20 | )
+21 + from airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth import find_user
+22 | 
+23 | log()
+24 | CLIENT_AUTH
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.api.auth.backend.kerberos_auth.init_app` is moved into `fab` provider in Airflow 3.0;
   --> AIR302_fab.py:26:1
@@ -183,19 +176,18 @@ AIR302 [*] `airflow.api.auth.backend.kerberos_auth.init_app` is moved into `fab`
 27 | requires_authentication()
    |
 help: Install `apache-airflow-providers-fab>=1.0.0` and use `init_app` from `airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth` instead.
-
-ℹ Unsafe fix
-15 15 | from airflow.api.auth.backend.kerberos_auth import (
-16 16 |     CLIENT_AUTH,
-17 17 |     find_user,
-18    |-    init_app,
-19 18 |     log,
-20 19 |     requires_authentication,
-21 20 | )
-   21 |+from airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth import init_app
-22 22 | 
-23 23 | log()
-24 24 | CLIENT_AUTH
+15 | from airflow.api.auth.backend.kerberos_auth import (
+16 |     CLIENT_AUTH,
+17 |     find_user,
+   -     init_app,
+18 |     log,
+19 |     requires_authentication,
+20 | )
+21 + from airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth import init_app
+22 | 
+23 | log()
+24 | CLIENT_AUTH
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.api.auth.backend.kerberos_auth.requires_authentication` is moved into `fab` provider in Airflow 3.0;
   --> AIR302_fab.py:27:1
@@ -208,17 +200,16 @@ AIR302 [*] `airflow.api.auth.backend.kerberos_auth.requires_authentication` is m
 29 | from airflow.auth.managers.fab.api.auth.backend.kerberos_auth import (
    |
 help: Install `apache-airflow-providers-fab>=1.0.0` and use `requires_authentication` from `airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth` instead.
-
-ℹ Unsafe fix
-17 17 |     find_user,
-18 18 |     init_app,
-19 19 |     log,
-20    |-    requires_authentication,
-21 20 | )
-   21 |+from airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth import requires_authentication
-22 22 | 
-23 23 | log()
-24 24 | CLIENT_AUTH
+17 |     find_user,
+18 |     init_app,
+19 |     log,
+   -     requires_authentication,
+20 | )
+21 + from airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth import requires_authentication
+22 | 
+23 | log()
+24 | CLIENT_AUTH
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.auth.managers.fab.api.auth.backend.kerberos_auth.log` is moved into `fab` provider in Airflow 3.0;
   --> AIR302_fab.py:37:1
@@ -231,18 +222,17 @@ AIR302 [*] `airflow.auth.managers.fab.api.auth.backend.kerberos_auth.log` is mov
 39 | find_user()
    |
 help: Install `apache-airflow-providers-fab>=1.0.0` and use `log` from `airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth` instead.
-
-ℹ Unsafe fix
-30 30 |     CLIENT_AUTH,
-31 31 |     find_user,
-32 32 |     init_app,
-33    |-    log,
-34 33 |     requires_authentication,
-35 34 | )
-   35 |+from airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth import log
-36 36 | 
-37 37 | log()
-38 38 | CLIENT_AUTH
+30 |     CLIENT_AUTH,
+31 |     find_user,
+32 |     init_app,
+   -     log,
+33 |     requires_authentication,
+34 | )
+35 + from airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth import log
+36 | 
+37 | log()
+38 | CLIENT_AUTH
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.auth.managers.fab.api.auth.backend.kerberos_auth.CLIENT_AUTH` is moved into `fab` provider in Airflow 3.0;
   --> AIR302_fab.py:38:1
@@ -254,21 +244,20 @@ AIR302 [*] `airflow.auth.managers.fab.api.auth.backend.kerberos_auth.CLIENT_AUTH
 40 | init_app()
    |
 help: Install `apache-airflow-providers-fab>=1.0.0` and use `CLIENT_AUTH` from `airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth` instead.
-
-ℹ Unsafe fix
-27 27 | requires_authentication()
-28 28 | 
-29 29 | from airflow.auth.managers.fab.api.auth.backend.kerberos_auth import (
-30    |-    CLIENT_AUTH,
-31 30 |     find_user,
-32 31 |     init_app,
-33 32 |     log,
-34 33 |     requires_authentication,
-35 34 | )
-   35 |+from airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth import CLIENT_AUTH
-36 36 | 
-37 37 | log()
-38 38 | CLIENT_AUTH
+27 | requires_authentication()
+28 | 
+29 | from airflow.auth.managers.fab.api.auth.backend.kerberos_auth import (
+   -     CLIENT_AUTH,
+30 |     find_user,
+31 |     init_app,
+32 |     log,
+33 |     requires_authentication,
+34 | )
+35 + from airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth import CLIENT_AUTH
+36 | 
+37 | log()
+38 | CLIENT_AUTH
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.auth.managers.fab.api.auth.backend.kerberos_auth.find_user` is moved into `fab` provider in Airflow 3.0;
   --> AIR302_fab.py:39:1
@@ -281,20 +270,19 @@ AIR302 [*] `airflow.auth.managers.fab.api.auth.backend.kerberos_auth.find_user`
 41 | requires_authentication()
    |
 help: Install `apache-airflow-providers-fab>=1.0.0` and use `find_user` from `airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth` instead.
-
-ℹ Unsafe fix
-28 28 | 
-29 29 | from airflow.auth.managers.fab.api.auth.backend.kerberos_auth import (
-30 30 |     CLIENT_AUTH,
-31    |-    find_user,
-32 31 |     init_app,
-33 32 |     log,
-34 33 |     requires_authentication,
-35 34 | )
-   35 |+from airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth import find_user
-36 36 | 
-37 37 | log()
-38 38 | CLIENT_AUTH
+28 | 
+29 | from airflow.auth.managers.fab.api.auth.backend.kerberos_auth import (
+30 |     CLIENT_AUTH,
+   -     find_user,
+31 |     init_app,
+32 |     log,
+33 |     requires_authentication,
+34 | )
+35 + from airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth import find_user
+36 | 
+37 | log()
+38 | CLIENT_AUTH
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.auth.managers.fab.api.auth.backend.kerberos_auth.init_app` is moved into `fab` provider in Airflow 3.0;
   --> AIR302_fab.py:40:1
@@ -306,19 +294,18 @@ AIR302 [*] `airflow.auth.managers.fab.api.auth.backend.kerberos_auth.init_app` i
 41 | requires_authentication()
    |
 help: Install `apache-airflow-providers-fab>=1.0.0` and use `init_app` from `airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth` instead.
-
-ℹ Unsafe fix
-29 29 | from airflow.auth.managers.fab.api.auth.backend.kerberos_auth import (
-30 30 |     CLIENT_AUTH,
-31 31 |     find_user,
-32    |-    init_app,
-33 32 |     log,
-34 33 |     requires_authentication,
-35 34 | )
-   35 |+from airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth import init_app
-36 36 | 
-37 37 | log()
-38 38 | CLIENT_AUTH
+29 | from airflow.auth.managers.fab.api.auth.backend.kerberos_auth import (
+30 |     CLIENT_AUTH,
+31 |     find_user,
+   -     init_app,
+32 |     log,
+33 |     requires_authentication,
+34 | )
+35 + from airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth import init_app
+36 | 
+37 | log()
+38 | CLIENT_AUTH
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.auth.managers.fab.api.auth.backend.kerberos_auth.requires_authentication` is moved into `fab` provider in Airflow 3.0;
   --> AIR302_fab.py:41:1
@@ -331,17 +318,16 @@ AIR302 [*] `airflow.auth.managers.fab.api.auth.backend.kerberos_auth.requires_au
 43 | from airflow.auth.managers.fab.fab_auth_manager import FabAuthManager
    |
 help: Install `apache-airflow-providers-fab>=1.0.0` and use `requires_authentication` from `airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth` instead.
-
-ℹ Unsafe fix
-31 31 |     find_user,
-32 32 |     init_app,
-33 33 |     log,
-34    |-    requires_authentication,
-35 34 | )
-   35 |+from airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth import requires_authentication
-36 36 | 
-37 37 | log()
-38 38 | CLIENT_AUTH
+31 |     find_user,
+32 |     init_app,
+33 |     log,
+   -     requires_authentication,
+34 | )
+35 + from airflow.providers.fab.auth_manager.api.auth.backend.kerberos_auth import requires_authentication
+36 | 
+37 | log()
+38 | CLIENT_AUTH
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.auth.managers.fab.fab_auth_manager.FabAuthManager` is moved into `fab` provider in Airflow 3.0;
   --> AIR302_fab.py:49:1
@@ -354,20 +340,19 @@ AIR302 [*] `airflow.auth.managers.fab.fab_auth_manager.FabAuthManager` is moved
 51 | FabAirflowSecurityManagerOverride()
    |
 help: Install `apache-airflow-providers-fab>=1.0.0` and use `FabAuthManager` from `airflow.providers.fab.auth_manager.fab_auth_manager` instead.
-
-ℹ Unsafe fix
-40 40 | init_app()
-41 41 | requires_authentication()
-42 42 | 
-43    |-from airflow.auth.managers.fab.fab_auth_manager import FabAuthManager
-44 43 | from airflow.auth.managers.fab.security_manager.override import (
-45 44 |     MAX_NUM_DATABASE_USER_SESSIONS,
-46 45 |     FabAirflowSecurityManagerOverride,
-47 46 | )
-   47 |+from airflow.providers.fab.auth_manager.fab_auth_manager import FabAuthManager
-48 48 | 
-49 49 | FabAuthManager()
-50 50 | MAX_NUM_DATABASE_USER_SESSIONS
+40 | init_app()
+41 | requires_authentication()
+42 | 
+   - from airflow.auth.managers.fab.fab_auth_manager import FabAuthManager
+43 | from airflow.auth.managers.fab.security_manager.override import (
+44 |     MAX_NUM_DATABASE_USER_SESSIONS,
+45 |     FabAirflowSecurityManagerOverride,
+46 | )
+47 + from airflow.providers.fab.auth_manager.fab_auth_manager import FabAuthManager
+48 | 
+49 | FabAuthManager()
+50 | MAX_NUM_DATABASE_USER_SESSIONS
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.auth.managers.fab.security_manager.override.MAX_NUM_DATABASE_USER_SESSIONS` is moved into `fab` provider in Airflow 3.0;
   --> AIR302_fab.py:50:1
@@ -378,18 +363,17 @@ AIR302 [*] `airflow.auth.managers.fab.security_manager.override.MAX_NUM_DATABASE
 51 | FabAirflowSecurityManagerOverride()
    |
 help: Install `apache-airflow-providers-fab>=1.0.0` and use `MAX_NUM_DATABASE_USER_SESSIONS` from `airflow.providers.fab.auth_manager.security_manager.override` instead.
-
-ℹ Unsafe fix
-42 42 | 
-43 43 | from airflow.auth.managers.fab.fab_auth_manager import FabAuthManager
-44 44 | from airflow.auth.managers.fab.security_manager.override import (
-45    |-    MAX_NUM_DATABASE_USER_SESSIONS,
-46 45 |     FabAirflowSecurityManagerOverride,
-47 46 | )
-   47 |+from airflow.providers.fab.auth_manager.security_manager.override import MAX_NUM_DATABASE_USER_SESSIONS
-48 48 | 
-49 49 | FabAuthManager()
-50 50 | MAX_NUM_DATABASE_USER_SESSIONS
+42 | 
+43 | from airflow.auth.managers.fab.fab_auth_manager import FabAuthManager
+44 | from airflow.auth.managers.fab.security_manager.override import (
+   -     MAX_NUM_DATABASE_USER_SESSIONS,
+45 |     FabAirflowSecurityManagerOverride,
+46 | )
+47 + from airflow.providers.fab.auth_manager.security_manager.override import MAX_NUM_DATABASE_USER_SESSIONS
+48 | 
+49 | FabAuthManager()
+50 | MAX_NUM_DATABASE_USER_SESSIONS
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.auth.managers.fab.security_manager.override.FabAirflowSecurityManagerOverride` is moved into `fab` provider in Airflow 3.0;
   --> AIR302_fab.py:51:1
@@ -402,17 +386,16 @@ AIR302 [*] `airflow.auth.managers.fab.security_manager.override.FabAirflowSecuri
 53 | from airflow.www.security import FabAirflowSecurityManagerOverride
    |
 help: Install `apache-airflow-providers-fab>=1.0.0` and use `FabAirflowSecurityManagerOverride` from `airflow.providers.fab.auth_manager.security_manager.override` instead.
-
-ℹ Unsafe fix
-43 43 | from airflow.auth.managers.fab.fab_auth_manager import FabAuthManager
-44 44 | from airflow.auth.managers.fab.security_manager.override import (
-45 45 |     MAX_NUM_DATABASE_USER_SESSIONS,
-46    |-    FabAirflowSecurityManagerOverride,
-47 46 | )
-   47 |+from airflow.providers.fab.auth_manager.security_manager.override import FabAirflowSecurityManagerOverride
-48 48 | 
-49 49 | FabAuthManager()
-50 50 | MAX_NUM_DATABASE_USER_SESSIONS
+43 | from airflow.auth.managers.fab.fab_auth_manager import FabAuthManager
+44 | from airflow.auth.managers.fab.security_manager.override import (
+45 |     MAX_NUM_DATABASE_USER_SESSIONS,
+   -     FabAirflowSecurityManagerOverride,
+46 | )
+47 + from airflow.providers.fab.auth_manager.security_manager.override import FabAirflowSecurityManagerOverride
+48 | 
+49 | FabAuthManager()
+50 | MAX_NUM_DATABASE_USER_SESSIONS
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.www.security.FabAirflowSecurityManagerOverride` is moved into `fab` provider in Airflow 3.0;
   --> AIR302_fab.py:55:1
@@ -423,12 +406,11 @@ AIR302 [*] `airflow.www.security.FabAirflowSecurityManagerOverride` is moved int
    | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    |
 help: Install `apache-airflow-providers-fab>=1.0.0` and use `FabAirflowSecurityManagerOverride` from `airflow.providers.fab.auth_manager.security_manager.override` instead.
-
-ℹ Unsafe fix
-50 50 | MAX_NUM_DATABASE_USER_SESSIONS
-51 51 | FabAirflowSecurityManagerOverride()
-52 52 | 
-53    |-from airflow.www.security import FabAirflowSecurityManagerOverride
-   53 |+from airflow.providers.fab.auth_manager.security_manager.override import FabAirflowSecurityManagerOverride
-54 54 | 
-55 55 | FabAirflowSecurityManagerOverride()
+50 | MAX_NUM_DATABASE_USER_SESSIONS
+51 | FabAirflowSecurityManagerOverride()
+52 | 
+   - from airflow.www.security import FabAirflowSecurityManagerOverride
+53 + from airflow.providers.fab.auth_manager.security_manager.override import FabAirflowSecurityManagerOverride
+54 | 
+55 | FabAirflowSecurityManagerOverride()
+note: This is an unsafe fix and may change runtime behavior

crates/ruff_linter/src/rules/airflow/snapshots/ruff_linter__rules__airflow__tests__AIR302_AIR302_hdfs.py.snap

@@ -11,16 +11,15 @@ AIR302 [*] `airflow.hooks.webhdfs_hook.WebHDFSHook` is moved into `apache-hdfs`
 7 | WebHdfsSensor()
   |
 help: Install `apache-airflow-providers-apache-hdfs>=1.0.0` and use `WebHDFSHook` from `airflow.providers.apache.hdfs.hooks.webhdfs` instead.
-
-ℹ Unsafe fix
-1 1 | from __future__ import annotations
-2 2 | 
-3   |-from airflow.hooks.webhdfs_hook import WebHDFSHook
-4 3 | from airflow.sensors.web_hdfs_sensor import WebHdfsSensor
-  4 |+from airflow.providers.apache.hdfs.hooks.webhdfs import WebHDFSHook
-5 5 | 
-6 6 | WebHDFSHook()
-7 7 | WebHdfsSensor()
+1 | from __future__ import annotations
+2 | 
+  - from airflow.hooks.webhdfs_hook import WebHDFSHook
+3 | from airflow.sensors.web_hdfs_sensor import WebHdfsSensor
+4 + from airflow.providers.apache.hdfs.hooks.webhdfs import WebHDFSHook
+5 | 
+6 | WebHDFSHook()
+7 | WebHdfsSensor()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.sensors.web_hdfs_sensor.WebHdfsSensor` is moved into `apache-hdfs` provider in Airflow 3.0;
  --> AIR302_hdfs.py:7:1
@@ -30,13 +29,12 @@ AIR302 [*] `airflow.sensors.web_hdfs_sensor.WebHdfsSensor` is moved into `apache
   | ^^^^^^^^^^^^^
   |
 help: Install `apache-airflow-providers-apache-hdfs>=1.0.0` and use `WebHdfsSensor` from `airflow.providers.apache.hdfs.sensors.web_hdfs` instead.
-
-ℹ Unsafe fix
-1 1 | from __future__ import annotations
-2 2 | 
-3 3 | from airflow.hooks.webhdfs_hook import WebHDFSHook
-4   |-from airflow.sensors.web_hdfs_sensor import WebHdfsSensor
-  4 |+from airflow.providers.apache.hdfs.sensors.web_hdfs import WebHdfsSensor
-5 5 | 
-6 6 | WebHDFSHook()
-7 7 | WebHdfsSensor()
+1 | from __future__ import annotations
+2 | 
+3 | from airflow.hooks.webhdfs_hook import WebHDFSHook
+  - from airflow.sensors.web_hdfs_sensor import WebHdfsSensor
+4 + from airflow.providers.apache.hdfs.sensors.web_hdfs import WebHdfsSensor
+5 | 
+6 | WebHDFSHook()
+7 | WebHdfsSensor()
+note: This is an unsafe fix and may change runtime behavior

crates/ruff_linter/src/rules/airflow/snapshots/ruff_linter__rules__airflow__tests__AIR302_AIR302_hive.py.snap

@@ -12,23 +12,22 @@ AIR302 [*] `airflow.hooks.hive_hooks.HIVE_QUEUE_PRIORITIES` is moved into `apach
 20 | HiveMetastoreHook()
    |
 help: Install `apache-airflow-providers-apache-hive>=1.0.0` and use `HIVE_QUEUE_PRIORITIES` from `airflow.providers.apache.hive.hooks.hive` instead.
-
-ℹ Unsafe fix
-1  1  | from __future__ import annotations
-2  2  | 
-3  3  | from airflow.hooks.hive_hooks import (
-4     |-    HIVE_QUEUE_PRIORITIES,
-5  4  |     HiveCliHook,
-6  5  |     HiveMetastoreHook,
-7  6  |     HiveServer2Hook,
+1  | from __future__ import annotations
+2  | 
+3  | from airflow.hooks.hive_hooks import (
+   -     HIVE_QUEUE_PRIORITIES,
+4  |     HiveCliHook,
+5  |     HiveMetastoreHook,
+6  |     HiveServer2Hook,
 --------------------------------------------------------------------------------
-14 13 | from airflow.operators.hive_stats_operator import HiveStatsCollectionOperator
-15 14 | from airflow.operators.hive_to_mysql import HiveToMySqlOperator
-16 15 | from airflow.operators.hive_to_samba_operator import HiveToSambaOperator
-   16 |+from airflow.providers.apache.hive.hooks.hive import HIVE_QUEUE_PRIORITIES
-17 17 | 
-18 18 | HIVE_QUEUE_PRIORITIES
-19 19 | HiveCliHook()
+13 | from airflow.operators.hive_stats_operator import HiveStatsCollectionOperator
+14 | from airflow.operators.hive_to_mysql import HiveToMySqlOperator
+15 | from airflow.operators.hive_to_samba_operator import HiveToSambaOperator
+16 + from airflow.providers.apache.hive.hooks.hive import HIVE_QUEUE_PRIORITIES
+17 | 
+18 | HIVE_QUEUE_PRIORITIES
+19 | HiveCliHook()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.hooks.hive_hooks.HiveCliHook` is moved into `apache-hive` provider in Airflow 3.0;
   --> AIR302_hive.py:19:1
@@ -40,23 +39,22 @@ AIR302 [*] `airflow.hooks.hive_hooks.HiveCliHook` is moved into `apache-hive` pr
 21 | HiveServer2Hook()
    |
 help: Install `apache-airflow-providers-apache-hive>=1.0.0` and use `HiveCliHook` from `airflow.providers.apache.hive.hooks.hive` instead.
-
-ℹ Unsafe fix
-2  2  | 
-3  3  | from airflow.hooks.hive_hooks import (
-4  4  |     HIVE_QUEUE_PRIORITIES,
-5     |-    HiveCliHook,
-6  5  |     HiveMetastoreHook,
-7  6  |     HiveServer2Hook,
-8  7  | )
+2  | 
+3  | from airflow.hooks.hive_hooks import (
+4  |     HIVE_QUEUE_PRIORITIES,
+   -     HiveCliHook,
+5  |     HiveMetastoreHook,
+6  |     HiveServer2Hook,
+7  | )
 --------------------------------------------------------------------------------
-14 13 | from airflow.operators.hive_stats_operator import HiveStatsCollectionOperator
-15 14 | from airflow.operators.hive_to_mysql import HiveToMySqlOperator
-16 15 | from airflow.operators.hive_to_samba_operator import HiveToSambaOperator
-   16 |+from airflow.providers.apache.hive.hooks.hive import HiveCliHook
-17 17 | 
-18 18 | HIVE_QUEUE_PRIORITIES
-19 19 | HiveCliHook()
+13 | from airflow.operators.hive_stats_operator import HiveStatsCollectionOperator
+14 | from airflow.operators.hive_to_mysql import HiveToMySqlOperator
+15 | from airflow.operators.hive_to_samba_operator import HiveToSambaOperator
+16 + from airflow.providers.apache.hive.hooks.hive import HiveCliHook
+17 | 
+18 | HIVE_QUEUE_PRIORITIES
+19 | HiveCliHook()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.hooks.hive_hooks.HiveMetastoreHook` is moved into `apache-hive` provider in Airflow 3.0;
   --> AIR302_hive.py:20:1
@@ -68,23 +66,22 @@ AIR302 [*] `airflow.hooks.hive_hooks.HiveMetastoreHook` is moved into `apache-hi
 21 | HiveServer2Hook()
    |
 help: Install `apache-airflow-providers-apache-hive>=1.0.0` and use `HiveMetastoreHook` from `airflow.providers.apache.hive.hooks.hive` instead.
-
-ℹ Unsafe fix
-3  3  | from airflow.hooks.hive_hooks import (
-4  4  |     HIVE_QUEUE_PRIORITIES,
-5  5  |     HiveCliHook,
-6     |-    HiveMetastoreHook,
-7  6  |     HiveServer2Hook,
-8  7  | )
-9  8  | from airflow.macros.hive import (
+3  | from airflow.hooks.hive_hooks import (
+4  |     HIVE_QUEUE_PRIORITIES,
+5  |     HiveCliHook,
+   -     HiveMetastoreHook,
+6  |     HiveServer2Hook,
+7  | )
+8  | from airflow.macros.hive import (
 --------------------------------------------------------------------------------
-14 13 | from airflow.operators.hive_stats_operator import HiveStatsCollectionOperator
-15 14 | from airflow.operators.hive_to_mysql import HiveToMySqlOperator
-16 15 | from airflow.operators.hive_to_samba_operator import HiveToSambaOperator
-   16 |+from airflow.providers.apache.hive.hooks.hive import HiveMetastoreHook
-17 17 | 
-18 18 | HIVE_QUEUE_PRIORITIES
-19 19 | HiveCliHook()
+13 | from airflow.operators.hive_stats_operator import HiveStatsCollectionOperator
+14 | from airflow.operators.hive_to_mysql import HiveToMySqlOperator
+15 | from airflow.operators.hive_to_samba_operator import HiveToSambaOperator
+16 + from airflow.providers.apache.hive.hooks.hive import HiveMetastoreHook
+17 | 
+18 | HIVE_QUEUE_PRIORITIES
+19 | HiveCliHook()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.hooks.hive_hooks.HiveServer2Hook` is moved into `apache-hive` provider in Airflow 3.0;
   --> AIR302_hive.py:21:1
@@ -97,23 +94,22 @@ AIR302 [*] `airflow.hooks.hive_hooks.HiveServer2Hook` is moved into `apache-hive
 23 | closest_ds_partition()
    |
 help: Install `apache-airflow-providers-apache-hive>=1.0.0` and use `HiveServer2Hook` from `airflow.providers.apache.hive.hooks.hive` instead.
-
-ℹ Unsafe fix
-4  4  |     HIVE_QUEUE_PRIORITIES,
-5  5  |     HiveCliHook,
-6  6  |     HiveMetastoreHook,
-7     |-    HiveServer2Hook,
-8  7  | )
-9  8  | from airflow.macros.hive import (
-10 9  |     closest_ds_partition,
+4  |     HIVE_QUEUE_PRIORITIES,
+5  |     HiveCliHook,
+6  |     HiveMetastoreHook,
+   -     HiveServer2Hook,
+7  | )
+8  | from airflow.macros.hive import (
+9  |     closest_ds_partition,
 --------------------------------------------------------------------------------
-14 13 | from airflow.operators.hive_stats_operator import HiveStatsCollectionOperator
-15 14 | from airflow.operators.hive_to_mysql import HiveToMySqlOperator
-16 15 | from airflow.operators.hive_to_samba_operator import HiveToSambaOperator
-   16 |+from airflow.providers.apache.hive.hooks.hive import HiveServer2Hook
-17 17 | 
-18 18 | HIVE_QUEUE_PRIORITIES
-19 19 | HiveCliHook()
+13 | from airflow.operators.hive_stats_operator import HiveStatsCollectionOperator
+14 | from airflow.operators.hive_to_mysql import HiveToMySqlOperator
+15 | from airflow.operators.hive_to_samba_operator import HiveToSambaOperator
+16 + from airflow.providers.apache.hive.hooks.hive import HiveServer2Hook
+17 | 
+18 | HIVE_QUEUE_PRIORITIES
+19 | HiveCliHook()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.macros.hive.closest_ds_partition` is moved into `apache-hive` provider in Airflow 3.0;
   --> AIR302_hive.py:23:1
@@ -125,22 +121,21 @@ AIR302 [*] `airflow.macros.hive.closest_ds_partition` is moved into `apache-hive
 24 | max_partition()
    |
 help: Install `apache-airflow-providers-apache-hive>=5.1.0` and use `closest_ds_partition` from `airflow.providers.apache.hive.macros.hive` instead.
-
-ℹ Unsafe fix
-7  7  |     HiveServer2Hook,
-8  8  | )
-9  9  | from airflow.macros.hive import (
-10    |-    closest_ds_partition,
-11 10 |     max_partition,
-12 11 | )
-13 12 | from airflow.operators.hive_operator import HiveOperator
-14 13 | from airflow.operators.hive_stats_operator import HiveStatsCollectionOperator
-15 14 | from airflow.operators.hive_to_mysql import HiveToMySqlOperator
-16 15 | from airflow.operators.hive_to_samba_operator import HiveToSambaOperator
-   16 |+from airflow.providers.apache.hive.macros.hive import closest_ds_partition
-17 17 | 
-18 18 | HIVE_QUEUE_PRIORITIES
-19 19 | HiveCliHook()
+7  |     HiveServer2Hook,
+8  | )
+9  | from airflow.macros.hive import (
+   -     closest_ds_partition,
+10 |     max_partition,
+11 | )
+12 | from airflow.operators.hive_operator import HiveOperator
+13 | from airflow.operators.hive_stats_operator import HiveStatsCollectionOperator
+14 | from airflow.operators.hive_to_mysql import HiveToMySqlOperator
+15 | from airflow.operators.hive_to_samba_operator import HiveToSambaOperator
+16 + from airflow.providers.apache.hive.macros.hive import closest_ds_partition
+17 | 
+18 | HIVE_QUEUE_PRIORITIES
+19 | HiveCliHook()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.macros.hive.max_partition` is moved into `apache-hive` provider in Airflow 3.0;
   --> AIR302_hive.py:24:1
@@ -152,21 +147,20 @@ AIR302 [*] `airflow.macros.hive.max_partition` is moved into `apache-hive` provi
 26 | HiveOperator()
    |
 help: Install `apache-airflow-providers-apache-hive>=5.1.0` and use `max_partition` from `airflow.providers.apache.hive.macros.hive` instead.
-
-ℹ Unsafe fix
-8  8  | )
-9  9  | from airflow.macros.hive import (
-10 10 |     closest_ds_partition,
-11    |-    max_partition,
-12 11 | )
-13 12 | from airflow.operators.hive_operator import HiveOperator
-14 13 | from airflow.operators.hive_stats_operator import HiveStatsCollectionOperator
-15 14 | from airflow.operators.hive_to_mysql import HiveToMySqlOperator
-16 15 | from airflow.operators.hive_to_samba_operator import HiveToSambaOperator
-   16 |+from airflow.providers.apache.hive.macros.hive import max_partition
-17 17 | 
-18 18 | HIVE_QUEUE_PRIORITIES
-19 19 | HiveCliHook()
+8  | )
+9  | from airflow.macros.hive import (
+10 |     closest_ds_partition,
+   -     max_partition,
+11 | )
+12 | from airflow.operators.hive_operator import HiveOperator
+13 | from airflow.operators.hive_stats_operator import HiveStatsCollectionOperator
+14 | from airflow.operators.hive_to_mysql import HiveToMySqlOperator
+15 | from airflow.operators.hive_to_samba_operator import HiveToSambaOperator
+16 + from airflow.providers.apache.hive.macros.hive import max_partition
+17 | 
+18 | HIVE_QUEUE_PRIORITIES
+19 | HiveCliHook()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.hive_operator.HiveOperator` is moved into `apache-hive` provider in Airflow 3.0;
   --> AIR302_hive.py:26:1
@@ -179,19 +173,18 @@ AIR302 [*] `airflow.operators.hive_operator.HiveOperator` is moved into `apache-
 28 | HiveToMySqlOperator()
    |
 help: Install `apache-airflow-providers-apache-hive>=1.0.0` and use `HiveOperator` from `airflow.providers.apache.hive.operators.hive` instead.
-
-ℹ Unsafe fix
-10 10 |     closest_ds_partition,
-11 11 |     max_partition,
-12 12 | )
-13    |-from airflow.operators.hive_operator import HiveOperator
-14 13 | from airflow.operators.hive_stats_operator import HiveStatsCollectionOperator
-15 14 | from airflow.operators.hive_to_mysql import HiveToMySqlOperator
-16 15 | from airflow.operators.hive_to_samba_operator import HiveToSambaOperator
-   16 |+from airflow.providers.apache.hive.operators.hive import HiveOperator
-17 17 | 
-18 18 | HIVE_QUEUE_PRIORITIES
-19 19 | HiveCliHook()
+10 |     closest_ds_partition,
+11 |     max_partition,
+12 | )
+   - from airflow.operators.hive_operator import HiveOperator
+13 | from airflow.operators.hive_stats_operator import HiveStatsCollectionOperator
+14 | from airflow.operators.hive_to_mysql import HiveToMySqlOperator
+15 | from airflow.operators.hive_to_samba_operator import HiveToSambaOperator
+16 + from airflow.providers.apache.hive.operators.hive import HiveOperator
+17 | 
+18 | HIVE_QUEUE_PRIORITIES
+19 | HiveCliHook()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.hive_stats_operator.HiveStatsCollectionOperator` is moved into `apache-hive` provider in Airflow 3.0;
   --> AIR302_hive.py:27:1
@@ -203,18 +196,17 @@ AIR302 [*] `airflow.operators.hive_stats_operator.HiveStatsCollectionOperator` i
 29 | HiveToSambaOperator()
    |
 help: Install `apache-airflow-providers-apache-hive>=1.0.0` and use `HiveStatsCollectionOperator` from `airflow.providers.apache.hive.operators.hive_stats` instead.
-
-ℹ Unsafe fix
-11 11 |     max_partition,
-12 12 | )
-13 13 | from airflow.operators.hive_operator import HiveOperator
-14    |-from airflow.operators.hive_stats_operator import HiveStatsCollectionOperator
-15 14 | from airflow.operators.hive_to_mysql import HiveToMySqlOperator
-16 15 | from airflow.operators.hive_to_samba_operator import HiveToSambaOperator
-   16 |+from airflow.providers.apache.hive.operators.hive_stats import HiveStatsCollectionOperator
-17 17 | 
-18 18 | HIVE_QUEUE_PRIORITIES
-19 19 | HiveCliHook()
+11 |     max_partition,
+12 | )
+13 | from airflow.operators.hive_operator import HiveOperator
+   - from airflow.operators.hive_stats_operator import HiveStatsCollectionOperator
+14 | from airflow.operators.hive_to_mysql import HiveToMySqlOperator
+15 | from airflow.operators.hive_to_samba_operator import HiveToSambaOperator
+16 + from airflow.providers.apache.hive.operators.hive_stats import HiveStatsCollectionOperator
+17 | 
+18 | HIVE_QUEUE_PRIORITIES
+19 | HiveCliHook()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.hive_to_mysql.HiveToMySqlOperator` is moved into `apache-hive` provider in Airflow 3.0;
   --> AIR302_hive.py:28:1
@@ -226,17 +218,16 @@ AIR302 [*] `airflow.operators.hive_to_mysql.HiveToMySqlOperator` is moved into `
 29 | HiveToSambaOperator()
    |
 help: Install `apache-airflow-providers-apache-hive>=1.0.0` and use `HiveToMySqlOperator` from `airflow.providers.apache.hive.transfers.hive_to_mysql` instead.
-
-ℹ Unsafe fix
-12 12 | )
-13 13 | from airflow.operators.hive_operator import HiveOperator
-14 14 | from airflow.operators.hive_stats_operator import HiveStatsCollectionOperator
-15    |-from airflow.operators.hive_to_mysql import HiveToMySqlOperator
-16 15 | from airflow.operators.hive_to_samba_operator import HiveToSambaOperator
-   16 |+from airflow.providers.apache.hive.transfers.hive_to_mysql import HiveToMySqlOperator
-17 17 | 
-18 18 | HIVE_QUEUE_PRIORITIES
-19 19 | HiveCliHook()
+12 | )
+13 | from airflow.operators.hive_operator import HiveOperator
+14 | from airflow.operators.hive_stats_operator import HiveStatsCollectionOperator
+   - from airflow.operators.hive_to_mysql import HiveToMySqlOperator
+15 | from airflow.operators.hive_to_samba_operator import HiveToSambaOperator
+16 + from airflow.providers.apache.hive.transfers.hive_to_mysql import HiveToMySqlOperator
+17 | 
+18 | HIVE_QUEUE_PRIORITIES
+19 | HiveCliHook()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.hive_to_samba_operator.HiveToSambaOperator` is moved into `apache-hive` provider in Airflow 3.0;
   --> AIR302_hive.py:29:1
@@ -247,16 +238,15 @@ AIR302 [*] `airflow.operators.hive_to_samba_operator.HiveToSambaOperator` is mov
    | ^^^^^^^^^^^^^^^^^^^
    |
 help: Install `apache-airflow-providers-apache-hive>=1.0.0` and use `HiveToSambaOperator` from `airflow.providers.apache.hive.transfers.hive_to_samba` instead.
-
-ℹ Unsafe fix
-13 13 | from airflow.operators.hive_operator import HiveOperator
-14 14 | from airflow.operators.hive_stats_operator import HiveStatsCollectionOperator
-15 15 | from airflow.operators.hive_to_mysql import HiveToMySqlOperator
-16    |-from airflow.operators.hive_to_samba_operator import HiveToSambaOperator
-   16 |+from airflow.providers.apache.hive.transfers.hive_to_samba import HiveToSambaOperator
-17 17 | 
-18 18 | HIVE_QUEUE_PRIORITIES
-19 19 | HiveCliHook()
+13 | from airflow.operators.hive_operator import HiveOperator
+14 | from airflow.operators.hive_stats_operator import HiveStatsCollectionOperator
+15 | from airflow.operators.hive_to_mysql import HiveToMySqlOperator
+   - from airflow.operators.hive_to_samba_operator import HiveToSambaOperator
+16 + from airflow.providers.apache.hive.transfers.hive_to_samba import HiveToSambaOperator
+17 | 
+18 | HIVE_QUEUE_PRIORITIES
+19 | HiveCliHook()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.hive_to_mysql.HiveToMySqlTransfer` is moved into `apache-hive` provider in Airflow 3.0;
   --> AIR302_hive.py:34:1
@@ -269,15 +259,14 @@ AIR302 [*] `airflow.operators.hive_to_mysql.HiveToMySqlTransfer` is moved into `
 36 | from airflow.operators.mysql_to_hive import MySqlToHiveOperator
    |
 help: Install `apache-airflow-providers-apache-hive>=1.0.0` and use `HiveToMySqlOperator` from `airflow.providers.apache.hive.transfers.hive_to_mysql` instead.
-
-ℹ Unsafe fix
-30 30 | 
-31 31 | 
-32 32 | from airflow.operators.hive_to_mysql import HiveToMySqlTransfer
-   33 |+from airflow.providers.apache.hive.transfers.hive_to_mysql import HiveToMySqlOperator
-33 34 | 
-34 35 | HiveToMySqlTransfer()
-35 36 | 
+30 | 
+31 | 
+32 | from airflow.operators.hive_to_mysql import HiveToMySqlTransfer
+33 + from airflow.providers.apache.hive.transfers.hive_to_mysql import HiveToMySqlOperator
+34 | 
+35 | HiveToMySqlTransfer()
+36 | 
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.mysql_to_hive.MySqlToHiveOperator` is moved into `apache-hive` provider in Airflow 3.0;
   --> AIR302_hive.py:38:1
@@ -290,16 +279,15 @@ AIR302 [*] `airflow.operators.mysql_to_hive.MySqlToHiveOperator` is moved into `
 40 | from airflow.operators.mysql_to_hive import MySqlToHiveTransfer
    |
 help: Install `apache-airflow-providers-apache-hive>=1.0.0` and use `MySqlToHiveOperator` from `airflow.providers.apache.hive.transfers.mysql_to_hive` instead.
-
-ℹ Unsafe fix
-33 33 | 
-34 34 | HiveToMySqlTransfer()
-35 35 | 
-36    |-from airflow.operators.mysql_to_hive import MySqlToHiveOperator
-   36 |+from airflow.providers.apache.hive.transfers.mysql_to_hive import MySqlToHiveOperator
-37 37 | 
-38 38 | MySqlToHiveOperator()
-39 39 | 
+33 | 
+34 | HiveToMySqlTransfer()
+35 | 
+   - from airflow.operators.mysql_to_hive import MySqlToHiveOperator
+36 + from airflow.providers.apache.hive.transfers.mysql_to_hive import MySqlToHiveOperator
+37 | 
+38 | MySqlToHiveOperator()
+39 | 
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.mysql_to_hive.MySqlToHiveTransfer` is moved into `apache-hive` provider in Airflow 3.0;
   --> AIR302_hive.py:42:1
@@ -312,15 +300,14 @@ AIR302 [*] `airflow.operators.mysql_to_hive.MySqlToHiveTransfer` is moved into `
 44 | from airflow.operators.mssql_to_hive import MsSqlToHiveOperator
    |
 help: Install `apache-airflow-providers-apache-hive>=1.0.0` and use `MySqlToHiveOperator` from `airflow.providers.apache.hive.transfers.mysql_to_hive` instead.
-
-ℹ Unsafe fix
-38 38 | MySqlToHiveOperator()
-39 39 | 
-40 40 | from airflow.operators.mysql_to_hive import MySqlToHiveTransfer
-   41 |+from airflow.providers.apache.hive.transfers.mysql_to_hive import MySqlToHiveOperator
-41 42 | 
-42 43 | MySqlToHiveTransfer()
-43 44 | 
+38 | MySqlToHiveOperator()
+39 | 
+40 | from airflow.operators.mysql_to_hive import MySqlToHiveTransfer
+41 + from airflow.providers.apache.hive.transfers.mysql_to_hive import MySqlToHiveOperator
+42 | 
+43 | MySqlToHiveTransfer()
+44 | 
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.mssql_to_hive.MsSqlToHiveOperator` is moved into `apache-hive` provider in Airflow 3.0;
   --> AIR302_hive.py:46:1
@@ -333,16 +320,15 @@ AIR302 [*] `airflow.operators.mssql_to_hive.MsSqlToHiveOperator` is moved into `
 48 | from airflow.operators.mssql_to_hive import MsSqlToHiveTransfer
    |
 help: Install `apache-airflow-providers-apache-hive>=1.0.0` and use `MsSqlToHiveOperator` from `airflow.providers.apache.hive.transfers.mssql_to_hive` instead.
-
-ℹ Unsafe fix
-41 41 | 
-42 42 | MySqlToHiveTransfer()
-43 43 | 
-44    |-from airflow.operators.mssql_to_hive import MsSqlToHiveOperator
-   44 |+from airflow.providers.apache.hive.transfers.mssql_to_hive import MsSqlToHiveOperator
-45 45 | 
-46 46 | MsSqlToHiveOperator()
-47 47 | 
+41 | 
+42 | MySqlToHiveTransfer()
+43 | 
+   - from airflow.operators.mssql_to_hive import MsSqlToHiveOperator
+44 + from airflow.providers.apache.hive.transfers.mssql_to_hive import MsSqlToHiveOperator
+45 | 
+46 | MsSqlToHiveOperator()
+47 | 
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.mssql_to_hive.MsSqlToHiveTransfer` is moved into `apache-hive` provider in Airflow 3.0;
   --> AIR302_hive.py:50:1
@@ -355,15 +341,14 @@ AIR302 [*] `airflow.operators.mssql_to_hive.MsSqlToHiveTransfer` is moved into `
 52 | from airflow.operators.s3_to_hive_operator import S3ToHiveOperator
    |
 help: Install `apache-airflow-providers-apache-hive>=1.0.0` and use `MsSqlToHiveOperator` from `airflow.providers.apache.hive.transfers.mssql_to_hive` instead.
-
-ℹ Unsafe fix
-46 46 | MsSqlToHiveOperator()
-47 47 | 
-48 48 | from airflow.operators.mssql_to_hive import MsSqlToHiveTransfer
-   49 |+from airflow.providers.apache.hive.transfers.mssql_to_hive import MsSqlToHiveOperator
-49 50 | 
-50 51 | MsSqlToHiveTransfer()
-51 52 | 
+46 | MsSqlToHiveOperator()
+47 | 
+48 | from airflow.operators.mssql_to_hive import MsSqlToHiveTransfer
+49 + from airflow.providers.apache.hive.transfers.mssql_to_hive import MsSqlToHiveOperator
+50 | 
+51 | MsSqlToHiveTransfer()
+52 | 
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.s3_to_hive_operator.S3ToHiveOperator` is moved into `apache-hive` provider in Airflow 3.0;
   --> AIR302_hive.py:54:1
@@ -376,16 +361,15 @@ AIR302 [*] `airflow.operators.s3_to_hive_operator.S3ToHiveOperator` is moved int
 56 | from airflow.operators.s3_to_hive_operator import S3ToHiveTransfer
    |
 help: Install `apache-airflow-providers-apache-hive>=1.0.0` and use `S3ToHiveOperator` from `airflow.providers.apache.hive.transfers.s3_to_hive` instead.
-
-ℹ Unsafe fix
-49 49 | 
-50 50 | MsSqlToHiveTransfer()
-51 51 | 
-52    |-from airflow.operators.s3_to_hive_operator import S3ToHiveOperator
-   52 |+from airflow.providers.apache.hive.transfers.s3_to_hive import S3ToHiveOperator
-53 53 | 
-54 54 | S3ToHiveOperator()
-55 55 | 
+49 | 
+50 | MsSqlToHiveTransfer()
+51 | 
+   - from airflow.operators.s3_to_hive_operator import S3ToHiveOperator
+52 + from airflow.providers.apache.hive.transfers.s3_to_hive import S3ToHiveOperator
+53 | 
+54 | S3ToHiveOperator()
+55 | 
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.s3_to_hive_operator.S3ToHiveTransfer` is moved into `apache-hive` provider in Airflow 3.0;
   --> AIR302_hive.py:58:1
@@ -398,15 +382,14 @@ AIR302 [*] `airflow.operators.s3_to_hive_operator.S3ToHiveTransfer` is moved int
 60 | from airflow.sensors.hive_partition_sensor import HivePartitionSensor
    |
 help: Install `apache-airflow-providers-apache-hive>=1.0.0` and use `S3ToHiveOperator` from `airflow.providers.apache.hive.transfers.s3_to_hive` instead.
-
-ℹ Unsafe fix
-54 54 | S3ToHiveOperator()
-55 55 | 
-56 56 | from airflow.operators.s3_to_hive_operator import S3ToHiveTransfer
-   57 |+from airflow.providers.apache.hive.transfers.s3_to_hive import S3ToHiveOperator
-57 58 | 
-58 59 | S3ToHiveTransfer()
-59 60 | 
+54 | S3ToHiveOperator()
+55 | 
+56 | from airflow.operators.s3_to_hive_operator import S3ToHiveTransfer
+57 + from airflow.providers.apache.hive.transfers.s3_to_hive import S3ToHiveOperator
+58 | 
+59 | S3ToHiveTransfer()
+60 | 
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.sensors.hive_partition_sensor.HivePartitionSensor` is moved into `apache-hive` provider in Airflow 3.0;
   --> AIR302_hive.py:62:1
@@ -419,16 +402,15 @@ AIR302 [*] `airflow.sensors.hive_partition_sensor.HivePartitionSensor` is moved
 64 | from airflow.sensors.metastore_partition_sensor import MetastorePartitionSensor
    |
 help: Install `apache-airflow-providers-apache-hive>=1.0.0` and use `HivePartitionSensor` from `airflow.providers.apache.hive.sensors.hive_partition` instead.
-
-ℹ Unsafe fix
-57 57 | 
-58 58 | S3ToHiveTransfer()
-59 59 | 
-60    |-from airflow.sensors.hive_partition_sensor import HivePartitionSensor
-   60 |+from airflow.providers.apache.hive.sensors.hive_partition import HivePartitionSensor
-61 61 | 
-62 62 | HivePartitionSensor()
-63 63 | 
+57 | 
+58 | S3ToHiveTransfer()
+59 | 
+   - from airflow.sensors.hive_partition_sensor import HivePartitionSensor
+60 + from airflow.providers.apache.hive.sensors.hive_partition import HivePartitionSensor
+61 | 
+62 | HivePartitionSensor()
+63 | 
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.sensors.metastore_partition_sensor.MetastorePartitionSensor` is moved into `apache-hive` provider in Airflow 3.0;
   --> AIR302_hive.py:66:1
@@ -441,16 +423,15 @@ AIR302 [*] `airflow.sensors.metastore_partition_sensor.MetastorePartitionSensor`
 68 | from airflow.sensors.named_hive_partition_sensor import NamedHivePartitionSensor
    |
 help: Install `apache-airflow-providers-apache-hive>=1.0.0` and use `MetastorePartitionSensor` from `airflow.providers.apache.hive.sensors.metastore_partition` instead.
-
-ℹ Unsafe fix
-61 61 | 
-62 62 | HivePartitionSensor()
-63 63 | 
-64    |-from airflow.sensors.metastore_partition_sensor import MetastorePartitionSensor
-   64 |+from airflow.providers.apache.hive.sensors.metastore_partition import MetastorePartitionSensor
-65 65 | 
-66 66 | MetastorePartitionSensor()
-67 67 | 
+61 | 
+62 | HivePartitionSensor()
+63 | 
+   - from airflow.sensors.metastore_partition_sensor import MetastorePartitionSensor
+64 + from airflow.providers.apache.hive.sensors.metastore_partition import MetastorePartitionSensor
+65 | 
+66 | MetastorePartitionSensor()
+67 | 
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.sensors.named_hive_partition_sensor.NamedHivePartitionSensor` is moved into `apache-hive` provider in Airflow 3.0;
   --> AIR302_hive.py:70:1
@@ -461,12 +442,11 @@ AIR302 [*] `airflow.sensors.named_hive_partition_sensor.NamedHivePartitionSensor
    | ^^^^^^^^^^^^^^^^^^^^^^^^
    |
 help: Install `apache-airflow-providers-apache-hive>=1.0.0` and use `NamedHivePartitionSensor` from `airflow.providers.apache.hive.sensors.named_hive_partition` instead.
-
-ℹ Unsafe fix
-65 65 | 
-66 66 | MetastorePartitionSensor()
-67 67 | 
-68    |-from airflow.sensors.named_hive_partition_sensor import NamedHivePartitionSensor
-   68 |+from airflow.providers.apache.hive.sensors.named_hive_partition import NamedHivePartitionSensor
-69 69 | 
-70 70 | NamedHivePartitionSensor()
+65 | 
+66 | MetastorePartitionSensor()
+67 | 
+   - from airflow.sensors.named_hive_partition_sensor import NamedHivePartitionSensor
+68 + from airflow.providers.apache.hive.sensors.named_hive_partition import NamedHivePartitionSensor
+69 | 
+70 | NamedHivePartitionSensor()
+note: This is an unsafe fix and may change runtime behavior

crates/ruff_linter/src/rules/airflow/snapshots/ruff_linter__rules__airflow__tests__AIR302_AIR302_http.py.snap

@@ -12,17 +12,16 @@ AIR302 [*] `airflow.hooks.http_hook.HttpHook` is moved into `http` provider in A
 9 | HttpSensor()
   |
 help: Install `apache-airflow-providers-http>=1.0.0` and use `HttpHook` from `airflow.providers.http.hooks.http` instead.
-
-ℹ Unsafe fix
-1 1 | from __future__ import annotations
-2 2 | 
-3   |-from airflow.hooks.http_hook import HttpHook
-4 3 | from airflow.operators.http_operator import SimpleHttpOperator
-5 4 | from airflow.sensors.http_sensor import HttpSensor
-  5 |+from airflow.providers.http.hooks.http import HttpHook
-6 6 | 
-7 7 | HttpHook()
-8 8 | SimpleHttpOperator()
+1 | from __future__ import annotations
+2 | 
+  - from airflow.hooks.http_hook import HttpHook
+3 | from airflow.operators.http_operator import SimpleHttpOperator
+4 | from airflow.sensors.http_sensor import HttpSensor
+5 + from airflow.providers.http.hooks.http import HttpHook
+6 | 
+7 | HttpHook()
+8 | SimpleHttpOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.http_operator.SimpleHttpOperator` is moved into `http` provider in Airflow 3.0;
  --> AIR302_http.py:8:1
@@ -33,17 +32,15 @@ AIR302 [*] `airflow.operators.http_operator.SimpleHttpOperator` is moved into `h
 9 | HttpSensor()
   |
 help: Install `apache-airflow-providers-http>=5.0.0` and use `HttpOperator` from `airflow.providers.http.operators.http` instead.
-
-ℹ Safe fix
-3  3  | from airflow.hooks.http_hook import HttpHook
-4  4  | from airflow.operators.http_operator import SimpleHttpOperator
-5  5  | from airflow.sensors.http_sensor import HttpSensor
-   6  |+from airflow.providers.http.operators.http import HttpOperator
-6  7  | 
-7  8  | HttpHook()
-8     |-SimpleHttpOperator()
-   9  |+HttpOperator()
-9  10 | HttpSensor()
+3  | from airflow.hooks.http_hook import HttpHook
+4  | from airflow.operators.http_operator import SimpleHttpOperator
+5  | from airflow.sensors.http_sensor import HttpSensor
+6  + from airflow.providers.http.operators.http import HttpOperator
+7  | 
+8  | HttpHook()
+   - SimpleHttpOperator()
+9  + HttpOperator()
+10 | HttpSensor()
 
 AIR302 [*] `airflow.sensors.http_sensor.HttpSensor` is moved into `http` provider in Airflow 3.0;
  --> AIR302_http.py:9:1
@@ -54,13 +51,12 @@ AIR302 [*] `airflow.sensors.http_sensor.HttpSensor` is moved into `http` provide
   | ^^^^^^^^^^
   |
 help: Install `apache-airflow-providers-http>=1.0.0` and use `HttpSensor` from `airflow.providers.http.sensors.http` instead.
-
-ℹ Unsafe fix
-2 2 | 
-3 3 | from airflow.hooks.http_hook import HttpHook
-4 4 | from airflow.operators.http_operator import SimpleHttpOperator
-5   |-from airflow.sensors.http_sensor import HttpSensor
-  5 |+from airflow.providers.http.sensors.http import HttpSensor
-6 6 | 
-7 7 | HttpHook()
-8 8 | SimpleHttpOperator()
+2 | 
+3 | from airflow.hooks.http_hook import HttpHook
+4 | from airflow.operators.http_operator import SimpleHttpOperator
+  - from airflow.sensors.http_sensor import HttpSensor
+5 + from airflow.providers.http.sensors.http import HttpSensor
+6 | 
+7 | HttpHook()
+8 | SimpleHttpOperator()
+note: This is an unsafe fix and may change runtime behavior

crates/ruff_linter/src/rules/airflow/snapshots/ruff_linter__rules__airflow__tests__AIR302_AIR302_jdbc.py.snap

@@ -11,18 +11,17 @@ AIR302 [*] `airflow.hooks.jdbc_hook.JdbcHook` is moved into `jdbc` provider in A
 9 | jaydebeapi()
   |
 help: Install `apache-airflow-providers-jdbc>=1.0.0` and use `JdbcHook` from `airflow.providers.jdbc.hooks.jdbc` instead.
-
-ℹ Unsafe fix
-1 1 | from __future__ import annotations
-2 2 | 
-3 3 | from airflow.hooks.jdbc_hook import (
-4   |-    JdbcHook,
-5 4 |     jaydebeapi,
-6 5 | )
-  6 |+from airflow.providers.jdbc.hooks.jdbc import JdbcHook
-7 7 | 
-8 8 | JdbcHook()
-9 9 | jaydebeapi()
+1 | from __future__ import annotations
+2 | 
+3 | from airflow.hooks.jdbc_hook import (
+  -     JdbcHook,
+4 |     jaydebeapi,
+5 | )
+6 + from airflow.providers.jdbc.hooks.jdbc import JdbcHook
+7 | 
+8 | JdbcHook()
+9 | jaydebeapi()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.hooks.jdbc_hook.jaydebeapi` is moved into `jdbc` provider in Airflow 3.0;
  --> AIR302_jdbc.py:9:1
@@ -32,14 +31,13 @@ AIR302 [*] `airflow.hooks.jdbc_hook.jaydebeapi` is moved into `jdbc` provider in
   | ^^^^^^^^^^
   |
 help: Install `apache-airflow-providers-jdbc>=1.0.0` and use `jaydebeapi` from `airflow.providers.jdbc.hooks.jdbc` instead.
-
-ℹ Unsafe fix
-2 2 | 
-3 3 | from airflow.hooks.jdbc_hook import (
-4 4 |     JdbcHook,
-5   |-    jaydebeapi,
-6 5 | )
-  6 |+from airflow.providers.jdbc.hooks.jdbc import jaydebeapi
-7 7 | 
-8 8 | JdbcHook()
-9 9 | jaydebeapi()
+2 | 
+3 | from airflow.hooks.jdbc_hook import (
+4 |     JdbcHook,
+  -     jaydebeapi,
+5 | )
+6 + from airflow.providers.jdbc.hooks.jdbc import jaydebeapi
+7 | 
+8 | JdbcHook()
+9 | jaydebeapi()
+note: This is an unsafe fix and may change runtime behavior

crates/ruff_linter/src/rules/airflow/snapshots/ruff_linter__rules__airflow__tests__AIR302_AIR302_mysql.py.snap

@@ -12,19 +12,18 @@ AIR302 [*] `airflow.hooks.mysql_hook.MySqlHook` is moved into `mysql` provider i
 11 | PrestoToMySqlTransfer()
    |
 help: Install `apache-airflow-providers-mysql>=1.0.0` and use `MySqlHook` from `airflow.providers.mysql.hooks.mysql` instead.
-
-ℹ Unsafe fix
-1 1 | from __future__ import annotations
-2 2 | 
-3   |-from airflow.hooks.mysql_hook import MySqlHook
-4 3 | from airflow.operators.presto_to_mysql import (
-5 4 |     PrestoToMySqlOperator,
-6 5 |     PrestoToMySqlTransfer,
-7 6 | )
-  7 |+from airflow.providers.mysql.hooks.mysql import MySqlHook
-8 8 | 
-9 9 | MySqlHook()
-10 10 | PrestoToMySqlOperator()
+1  | from __future__ import annotations
+2  | 
+   - from airflow.hooks.mysql_hook import MySqlHook
+3  | from airflow.operators.presto_to_mysql import (
+4  |     PrestoToMySqlOperator,
+5  |     PrestoToMySqlTransfer,
+6  | )
+7  + from airflow.providers.mysql.hooks.mysql import MySqlHook
+8  | 
+9  | MySqlHook()
+10 | PrestoToMySqlOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.presto_to_mysql.PrestoToMySqlOperator` is moved into `mysql` provider in Airflow 3.0;
   --> AIR302_mysql.py:10:1
@@ -35,18 +34,17 @@ AIR302 [*] `airflow.operators.presto_to_mysql.PrestoToMySqlOperator` is moved in
 11 | PrestoToMySqlTransfer()
    |
 help: Install `apache-airflow-providers-mysql>=1.0.0` and use `PrestoToMySqlOperator` from `airflow.providers.mysql.transfers.presto_to_mysql` instead.
-
-ℹ Unsafe fix
-2 2 | 
-3 3 | from airflow.hooks.mysql_hook import MySqlHook
-4 4 | from airflow.operators.presto_to_mysql import (
-5   |-    PrestoToMySqlOperator,
-6 5 |     PrestoToMySqlTransfer,
-7 6 | )
-  7 |+from airflow.providers.mysql.transfers.presto_to_mysql import PrestoToMySqlOperator
-8 8 | 
-9 9 | MySqlHook()
-10 10 | PrestoToMySqlOperator()
+2  | 
+3  | from airflow.hooks.mysql_hook import MySqlHook
+4  | from airflow.operators.presto_to_mysql import (
+   -     PrestoToMySqlOperator,
+5  |     PrestoToMySqlTransfer,
+6  | )
+7  + from airflow.providers.mysql.transfers.presto_to_mysql import PrestoToMySqlOperator
+8  | 
+9  | MySqlHook()
+10 | PrestoToMySqlOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.presto_to_mysql.PrestoToMySqlTransfer` is moved into `mysql` provider in Airflow 3.0;
   --> AIR302_mysql.py:11:1
@@ -57,15 +55,14 @@ AIR302 [*] `airflow.operators.presto_to_mysql.PrestoToMySqlTransfer` is moved in
    | ^^^^^^^^^^^^^^^^^^^^^
    |
 help: Install `apache-airflow-providers-mysql>=1.0.0` and use `PrestoToMySqlOperator` from `airflow.providers.mysql.transfers.presto_to_mysql` instead.
-
-ℹ Unsafe fix
-2 2 | 
-3 3 | from airflow.hooks.mysql_hook import MySqlHook
-4 4 | from airflow.operators.presto_to_mysql import (
-5   |-    PrestoToMySqlOperator,
-6 5 |     PrestoToMySqlTransfer,
-7 6 | )
-  7 |+from airflow.providers.mysql.transfers.presto_to_mysql import PrestoToMySqlOperator
-8 8 | 
-9 9 | MySqlHook()
-10 10 | PrestoToMySqlOperator()
+2  | 
+3  | from airflow.hooks.mysql_hook import MySqlHook
+4  | from airflow.operators.presto_to_mysql import (
+   -     PrestoToMySqlOperator,
+5  |     PrestoToMySqlTransfer,
+6  | )
+7  + from airflow.providers.mysql.transfers.presto_to_mysql import PrestoToMySqlOperator
+8  | 
+9  | MySqlHook()
+10 | PrestoToMySqlOperator()
+note: This is an unsafe fix and may change runtime behavior

crates/ruff_linter/src/rules/airflow/snapshots/ruff_linter__rules__airflow__tests__AIR302_AIR302_oracle.py.snap

@@ -10,11 +10,10 @@ AIR302 [*] `airflow.hooks.oracle_hook.OracleHook` is moved into `oracle` provide
   | ^^^^^^^^^^
   |
 help: Install `apache-airflow-providers-oracle>=1.0.0` and use `OracleHook` from `airflow.providers.oracle.hooks.oracle` instead.
-
-ℹ Unsafe fix
-1 1 | from __future__ import annotations
-2 2 | 
-3   |-from airflow.hooks.oracle_hook import OracleHook
-  3 |+from airflow.providers.oracle.hooks.oracle import OracleHook
-4 4 | 
-5 5 | OracleHook()
+1 | from __future__ import annotations
+2 | 
+  - from airflow.hooks.oracle_hook import OracleHook
+3 + from airflow.providers.oracle.hooks.oracle import OracleHook
+4 | 
+5 | OracleHook()
+note: This is an unsafe fix and may change runtime behavior

crates/ruff_linter/src/rules/airflow/snapshots/ruff_linter__rules__airflow__tests__AIR302_AIR302_papermill.py.snap

@@ -10,11 +10,10 @@ AIR302 [*] `airflow.operators.papermill_operator.PapermillOperator` is moved int
   | ^^^^^^^^^^^^^^^^^
   |
 help: Install `apache-airflow-providers-papermill>=1.0.0` and use `PapermillOperator` from `airflow.providers.papermill.operators.papermill` instead.
-
-ℹ Unsafe fix
-1 1 | from __future__ import annotations
-2 2 | 
-3   |-from airflow.operators.papermill_operator import PapermillOperator
-  3 |+from airflow.providers.papermill.operators.papermill import PapermillOperator
-4 4 | 
-5 5 | PapermillOperator()
+1 | from __future__ import annotations
+2 | 
+  - from airflow.operators.papermill_operator import PapermillOperator
+3 + from airflow.providers.papermill.operators.papermill import PapermillOperator
+4 | 
+5 | PapermillOperator()
+note: This is an unsafe fix and may change runtime behavior

crates/ruff_linter/src/rules/airflow/snapshots/ruff_linter__rules__airflow__tests__AIR302_AIR302_pig.py.snap

@@ -11,16 +11,15 @@ AIR302 [*] `airflow.hooks.pig_hook.PigCliHook` is moved into `apache-pig` provid
 7 | PigOperator()
   |
 help: Install `apache-airflow-providers-apache-pig>=1.0.0` and use `PigCliHook` from `airflow.providers.apache.pig.hooks.pig` instead.
-
-ℹ Unsafe fix
-1 1 | from __future__ import annotations
-2 2 | 
-3   |-from airflow.hooks.pig_hook import PigCliHook
-4 3 | from airflow.operators.pig_operator import PigOperator
-  4 |+from airflow.providers.apache.pig.hooks.pig import PigCliHook
-5 5 | 
-6 6 | PigCliHook()
-7 7 | PigOperator()
+1 | from __future__ import annotations
+2 | 
+  - from airflow.hooks.pig_hook import PigCliHook
+3 | from airflow.operators.pig_operator import PigOperator
+4 + from airflow.providers.apache.pig.hooks.pig import PigCliHook
+5 | 
+6 | PigCliHook()
+7 | PigOperator()
+note: This is an unsafe fix and may change runtime behavior
 
 AIR302 [*] `airflow.operators.pig_operator.PigOperator` is moved into `apache-pig` provider in Airflow 3.0;
  --> AIR302_pig.py:7:1
@@ -30,13 +29,12 @@ AIR302 [*] `airflow.operators.pig_operator.PigOperator` is moved into `apache-pi
   | ^^^^^^^^^^^
   |
 help: Install `apache-airflow-providers-apache-pig>=1.0.0` and use `PigOperator` from `airflow.providers.apache.pig.operators.pig` instead.
-
-ℹ Unsafe fix
-1 1 | from __future__ import annotations
-2 2 | 
-3 3 | from airflow.hooks.pig_hook import PigCliHook
-4   |-from airflow.operators.pig_operator import PigOperator
-  4 |+from airflow.providers.apache.pig.operators.pig import PigOperator
-5 5 | 
-6 6 | PigCliHook()
-7 7 | PigOperator()
+1 | from __future__ import annotations
+2 | 
+3 | from airflow.hooks.pig_hook import PigCliHook
+  - from airflow.operators.pig_operator import PigOperator
+4 + from airflow.providers.apache.pig.operators.pig import PigOperator
+5 | 
+6 | PigCliHook()
+7 | PigOperator()
+note: This is an unsafe fix and may change runtime behavior

crates/ruff_linter/src/rules/airflow/snapshots/ruff_linter__rules__airflow__tests__AIR302_AIR302_postgres.py.snap

@@ -11,21 +11,12 @@ AIR302 [*] `airflow.hooks.postgres_hook.PostgresHook` is moved into `postgres` p
 7 | Mapping()
   |
 help: Install `apache-airflow-providers-postgres>=1.0.0` and use `PostgresHook` from `airflow.providers.postgres.hooks.postgres` instead.
-
-ℹ Unsafe fix
-1 1 | from __future__ import annotations
-2 2 | 
-3   |-from airflow.hooks.postgres_hook import PostgresHook
-4 3 | from airflow.operators.postgres_operator import Mapping
-  4 |+from airflow.providers.postgres.hooks.postgres import PostgresHook
-5 5 | 
-6 6 | PostgresHook()
-7 7 | Mapping()
-
-AIR302 `airflow.operators.postgres_operator.Mapping` is removed in Airflow 3.0
- --> AIR302_postgres.py:7:1
-  |
+1 | from __future__ import annotations
+2 | 
+  - from airflow.hooks.postgres_hook import PostgresHook
+3 | from airflow.operators.postgres_operator import Mapping
+4 + from airflow.providers.postgres.hooks.postgres import PostgresHook
+5 | 
 6 | PostgresHook()
 7 | Mapping()
-  | ^^^^^^^
-  |
+note: This is an unsafe fix and may change runtime behavior