Merge pull request #6491 from ejohnstown/fix-imp-conv

Implicit Type Conversion Fix

.github/ISSUE_TEMPLATE/bug_report.yaml

@@ -0,0 +1,58 @@
+name: Bug Report
+description: File a bug report
+title: "[Bug]: "
+labels: ["bug", "triage"]
+body:
+  - type: markdown
+    attributes:
+      value: >
+        Thanks for reporting an bug. If you would prefer a private method,
+        please email support@wolfssl.com
+  - type: input
+    id: contact
+    attributes:
+      label: Contact Details
+      description: How can we get in touch with you if we need more info?
+      placeholder: ex. email@example.com
+    validations:
+      required: false
+  - type: input
+    id: version
+    attributes:
+      label: Version
+      description: What version were you using?
+    validations:
+      required: true
+  - type: textarea
+    id: details
+    attributes:
+      label: Description
+      description: |
+        Describe the issue in detail
+        Please include:
+          * Specific `./configure` options or `user_settings.h`
+          * Target and build environment
+      placeholder: |
+        Blinded by the light!
+        Code runs too fast. It's gone plaid!
+        ...
+    validations:
+      required: true
+  - type: textarea
+    id: reproduce
+    attributes:
+      label: Reproduction steps
+      description: If possible please give instructions on how to reproduce.
+      placeholder: |
+        1. `./configure --enable-42`
+        2. `make question`
+        3.
+        ...
+    validations:
+      required: false
+  - type: textarea
+    id: logs
+    attributes:
+      label: Relevant log output
+      description: Please copy and paste any relevant log output. This will be automatically formatted into code, so no need for backticks.
+      render: shell

.github/ISSUE_TEMPLATE/other.yaml

@@ -0,0 +1,28 @@
+name: General Issue
+description: Request support with an issue
+labels: ["triage"]
+body:
+  - type: markdown
+    attributes:
+      value: >
+        Thanks for reporting an issue. If you would prefer a private method,
+        please email support@wolfssl.com
+  - type: input
+    id: version
+    attributes:
+      label: Version
+      description: What version were you using?
+    validations:
+      required: true
+  - type: textarea
+    id: details
+    attributes:
+      label: Description
+      description: |
+        Describe the issue in detail.
+        Please include specific configuration options or user_settings.h
+      placeholder: |
+        `./configure --enable-world-domination` fails
+        ...
+    validations:
+      required: true

.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,16 @@
+# Description
+
+Please describe the scope of the fix or feature addition.
+
+Fixes zd#
+
+# Testing
+
+How did you test?
+
+# Checklist
+
+ - [ ] added tests
+ - [ ] updated/added doxygen
+ - [ ] updated appropriate READMEs
+ - [ ] Updated manual and documentation

.github/SECURITY.md

@@ -0,0 +1,12 @@
+# Security Policy
+
+## Reporting a Vulnerability
+
+If you discover a vulnerability, please report it to support@wolfssl.com
+
+ 1. Include a detailed description
+ 2. Include method to reproduce and/or method of discovery
+ 3. We will evaluate the report promptly and respond to you with findings.
+ 4. We will credit you with the report if you would like.
+
+**Please keep the vulnerability private** until a fix has been released.

.github/workflows/async.yml

@@ -0,0 +1,32 @@
+name: Async Tests
+
+on:
+  workflow_call:
+
+jobs:
+  make_check:
+    strategy:
+      matrix:
+        config: [
+          # Add new configs here
+          '--enable-asynccrypt --enable-all --enable-dtls13',
+          '--enable-asynccrypt-sw',
+        ]
+    name: make check
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+        name: Checkout wolfSSL
+
+      - name: Test wolfSSL async
+        run: |
+          ./async-check.sh setup
+          ./configure ${{ matrix.config }}
+          make check
+
+      - name: Print errors 
+        if: ${{ failure() }}
+        run: |
+          if [ -f test-suite.log ] ; then
+            cat test-suite.log
+          fi

.github/workflows/docker-Espressif.yml

@@ -0,0 +1,32 @@
+name: Espressif examples tests
+on:
+  workflow_call:
+
+jobs:
+  espressif_latest:
+    name: latest Docker container
+    runs-on: ubuntu-latest
+    container:
+      image: espressif/idf:latest
+    steps:
+      - uses: actions/checkout@v3
+      - name: Initialize Espressif IDE and build examples
+        run: . /opt/esp/idf/export.sh; IDE/Espressif/ESP-IDF/compileAllExamples.sh
+  espressif_v4_4:
+    name: v4.4 Docker container
+    runs-on: ubuntu-latest
+    container:
+      image: espressif/idf:release-v4.4
+    steps:
+      - uses: actions/checkout@v3
+      - name: Initialize Espressif IDE and build examples
+        run: . /opt/esp/idf/export.sh; IDE/Espressif/ESP-IDF/compileAllExamples.sh
+  espressif_v5_0:
+    name: v5.0 Docker container
+    runs-on: ubuntu-latest
+    container:
+      image: espressif/idf:release-v5.0
+    steps:
+      - uses: actions/checkout@v3
+      - name: Initialize Espressif IDE and build examples
+        run: . /opt/esp/idf/export.sh; IDE/Espressif/ESP-IDF/compileAllExamples.sh

.github/workflows/docker-OpenWrt.yml

@@ -0,0 +1,50 @@
+# This workflow tests out new libraries with existing OpenWrt builds to check
+# there aren't any compatibility issues. Take a look at Docker/OpenWrt/README.md
+name: OpenWrt test
+
+on:
+    workflow_call:
+
+jobs:
+    build_library:
+        name: Compile libwolfssl.so
+        runs-on: ubuntu-latest
+        container:
+            image: alpine:latest
+        steps:
+            - name: Install required tools
+              run: apk add argp-standalone asciidoc bash bc binutils bzip2 cdrkit coreutils diffutils elfutils-dev findutils flex musl-fts-dev g++ gawk gcc gettext git grep intltool libxslt linux-headers make musl-libintl musl-obstack-dev ncurses-dev openssl-dev patch perl python3-dev rsync tar unzip util-linux wget zlib-dev autoconf automake libtool
+            - uses: actions/checkout@v3
+            - name: Compile libwolfssl.so
+              run: ./autogen.sh && ./configure --enable-all && make
+            - name: Upload libwolfssl.so
+              uses: actions/upload-artifact@v3
+              with:
+                name: openwrt-libwolfssl.so
+                path: src/.libs/libwolfssl.so
+                retention-days: 1
+    compile_container:
+        name: Compile container
+        runs-on: ubuntu-latest
+        needs: build_library
+        strategy:
+            fail-fast: false
+            matrix:
+                release: [ "22.03-SNAPSHOT", "21.02-SNAPSHOT" ] # some other versions: 21.02.0 21.02.5 22.03.0 22.03.3 snapshot
+        steps:
+            - uses: actions/checkout@v3
+            - uses: docker/setup-buildx-action@v2
+            - uses: actions/download-artifact@v3
+              with:
+                name: openwrt-libwolfssl.so
+                path: Docker/OpenWrt/.
+            - name: Build but dont push
+              uses: docker/build-push-action@v3
+              with:
+                  context: Docker/OpenWrt
+                  platforms: linux/amd64
+                  push: false
+                  tags: openwrt-test:latest
+                  build-args: DOCKER_BASE_CONTAINER=openwrt/rootfs:x86-64-${{ matrix.release }}
+                  cache-from: type=gha
+                  cache-to: type=gha,mode=max

.github/workflows/haproxy.yml

@@ -0,0 +1,51 @@
+name: HaProxy Tests
+
+on:
+  workflow_call:
+
+jobs:
+  haproxy_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        # List of refs to test
+        ref: [ master ]
+    name: ${{ matrix.ref }}
+    runs-on: ubuntu-latest
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-quic --enable-haproxy
+          install: true
+
+      - name: Checkout VTest
+        uses: actions/checkout@v3
+        with:
+          repository: vtest/VTest
+          path: VTest
+
+      - name: Build VTest
+        working-directory: VTest
+        # Special flags due to: https://github.com/vtest/VTest/issues/12
+        run: make FLAGS='-O2 -s -Wall'
+
+      - name: Checkout HaProxy
+        uses: actions/checkout@v3
+        with:
+          repository: haproxy/haproxy
+          path: haproxy
+          ref: ${{ matrix.ref }}
+
+      - name: Build HaProxy
+        working-directory: haproxy
+        run: >-
+          make -j TARGET=linux-glibc DEBUG='-DDEBUG_MEMORY_POOLS -DDEBUG_STRICT'
+          USE_OPENSSL_WOLFSSL=1 USE_QUIC=1 SSL_INC=$GITHUB_WORKSPACE/build-dir/include/
+          SSL_LIB=$GITHUB_WORKSPACE/build-dir/lib/ ADDLIB=-Wl,-rpath=$GITHUB_WORKSPACE/build-dir/lib
+
+      - name: Test HaProxy
+        working-directory: haproxy
+        run: make reg-tests reg-tests/ssl VTEST_PROGRAM=$GITHUB_WORKSPACE/VTest/vtest
+ 

.github/workflows/hostap-files/Makefile

@@ -0,0 +1,11 @@
+obj-m := mac80211_hwsim.o
+KDIR := /lib/modules/$(shell uname -r)/build
+PWD := $(shell pwd)
+default:
+	$(MAKE) -C $(KDIR) M=$(PWD) modules
+install:
+	$(MAKE) -C $(KDIR) M=$(PWD) modules_install
+	depmod -A
+clean:
+	$(MAKE) -C $(KDIR) M=$(PWD) clean
+

.github/workflows/hostap-files/README

@@ -0,0 +1,2 @@
+Makefile and directory used in .github/workflows/hostap.yml to
+compile the mac80211_hwsim kernel module.

.github/workflows/hostap-files/configs/b607d2723e927a3446d89aed813f1aa6068186bb/hostapd.config

@@ -0,0 +1,120 @@
+#CC=ccache gcc
+
+CONFIG_DRIVER_NONE=y
+CONFIG_DRIVER_NL80211=y
+CONFIG_RSN_PREAUTH=y
+
+#CONFIG_TLS=internal
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+#CONFIG_TLS=openssl
+CONFIG_TLS=wolfssl
+
+CONFIG_EAP=y
+CONFIG_ERP=y
+CONFIG_EAP_MD5=y
+CONFIG_EAP_TLS=y
+CONFIG_EAP_MSCHAPV2=y
+CONFIG_EAP_PEAP=y
+CONFIG_EAP_GTC=y
+CONFIG_EAP_TTLS=y
+CONFIG_EAP_SIM=y
+CONFIG_EAP_AKA=y
+CONFIG_EAP_AKA_PRIME=y
+CONFIG_EAP_GPSK=y
+CONFIG_EAP_GPSK_SHA256=y
+CONFIG_EAP_SAKE=y
+CONFIG_EAP_PAX=y
+CONFIG_EAP_PSK=y
+CONFIG_EAP_VENDOR_TEST=y
+CONFIG_EAP_FAST=y
+CONFIG_EAP_TEAP=y
+CONFIG_EAP_IKEV2=y
+CONFIG_EAP_TNC=y
+CFLAGS += -DTNC_CONFIG_FILE=\"tnc/tnc_config\"
+LIBS += -rdynamic
+CONFIG_EAP_UNAUTH_TLS=y
+ifeq ($(CONFIG_TLS), openssl)
+CONFIG_EAP_PWD=y
+endif
+ifeq ($(CONFIG_TLS), wolfssl)
+CONFIG_EAP_PWD=y
+endif
+CONFIG_EAP_EKE=y
+CONFIG_PKCS12=y
+CONFIG_RADIUS_SERVER=y
+CONFIG_IPV6=y
+CONFIG_TLSV11=y
+CONFIG_TLSV12=y
+
+CONFIG_FULL_DYNAMIC_VLAN=y
+CONFIG_VLAN_NETLINK=y
+CONFIG_LIBNL32=y
+CONFIG_LIBNL3_ROUTE=y
+CONFIG_IEEE80211R=y
+CONFIG_IEEE80211AC=y
+CONFIG_IEEE80211AX=y
+
+CONFIG_OCV=y
+
+CONFIG_WPS=y
+CONFIG_WPS_UPNP=y
+CONFIG_WPS_NFC=y
+#CONFIG_WPS_STRICT=y
+CONFIG_WPA_TRACE=y
+CONFIG_WPA_TRACE_BFD=y
+
+CONFIG_P2P_MANAGER=y
+CONFIG_DEBUG_FILE=y
+CONFIG_DEBUG_LINUX_TRACING=y
+CONFIG_WPA_CLI_EDIT=y
+CONFIG_ACS=y
+CONFIG_NO_RANDOM_POOL=y
+CONFIG_WNM=y
+CONFIG_INTERWORKING=y
+CONFIG_HS20=y
+CONFIG_SQLITE=y
+CONFIG_SAE=y
+CONFIG_SAE_PK=y
+CFLAGS += -DALL_DH_GROUPS
+
+CONFIG_FST=y
+CONFIG_FST_TEST=y
+
+CONFIG_TESTING_OPTIONS=y
+CFLAGS += -DCONFIG_RADIUS_TEST
+CONFIG_MODULE_TESTS=y
+
+CONFIG_SUITEB=y
+
+# AddressSanitizer (ASan) can be enabled by uncommenting the following lines.
+# This can be used as a more efficient memory error detector than valgrind
+# (though, with still some CPU and memory cost, so VM cases will need more
+# memory allocated for the guest).
+#CFLAGS += -fsanitize=address -O1 -fno-omit-frame-pointer -g
+#LIBS += -fsanitize=address -fno-omit-frame-pointer -g
+#LIBS_h += -fsanitize=address -fno-omit-frame-pointer -g
+#LIBS_n += -fsanitize=address -fno-omit-frame-pointer -g
+#LIBS_c += -fsanitize=address -fno-omit-frame-pointer -g
+
+# Undefined Behavior Sanitizer (UBSan) can be enabled by uncommenting the
+# following lines.
+#CFLAGS += -Wno-format-nonliteral
+#CFLAGS += -fsanitize=undefined
+##CFLAGS += -fno-sanitize-recover
+#LIBS += -fsanitize=undefined
+##LIBS += -fno-sanitize-recover
+#LIBS_h += -fsanitize=undefined
+#LIBS_n += -fsanitize=undefined
+#LIBS_c += -fsanitize=undefined
+CONFIG_MBO=y
+
+CONFIG_TAXONOMY=y
+CONFIG_FILS=y
+CONFIG_FILS_SK_PFS=y
+CONFIG_OWE=y
+CONFIG_DPP=y
+CONFIG_DPP2=y
+CONFIG_WEP=y
+CONFIG_PASN=y
+CONFIG_AIRTIME_POLICY=y

.github/workflows/hostap-files/configs/b607d2723e927a3446d89aed813f1aa6068186bb/tests

@@ -0,0 +1,707 @@
+sae_pk
+sae_pk_group_negotiation
+sae_pk_sec_3
+sae_pk_sec_5
+sae_pk_group_20
+sae_pk_group_21
+sae_pk_group_20_sae_group_19
+sae_pk_group_20_sae_group_21
+sae_pk_group_19_sae_group_20
+sae_pk_password_without_pk
+sae_pk_only
+sae_pk_modes
+sae_pk_not_on_ap
+sae_pk_mixed
+sae_pk_mixed_immediate_confirm
+sae_pk_missing_ie
+sae_pk_unexpected_status
+sae_pk_invalid_signature
+sae_pk_invalid_fingerprint
+sae_pk_and_psk
+sae_pk_and_psk_invalid_password
+sae_pk_invalid_pw
+sae
+sae_password_ecc
+sae_pmksa_caching
+sae_pmksa_caching_pmkid
+sae_pmksa_caching_disabled
+sae_groups
+sae_group_nego
+sae_group_nego_no_match
+sae_anti_clogging
+sae_forced_anti_clogging
+sae_mixed
+sae_and_psk
+sae_and_psk2
+sae_wpa3_roam
+sae_mixed_mfp
+sae_mfp
+sae_missing_password
+sae_key_lifetime_in_memory
+sae_oom_wpas
+sae_proto_ecc
+sae_proto_ffc
+sae_proto_commit_delayed
+sae_proto_commit_replay
+sae_proto_confirm_replay
+sae_proto_hostapd
+sae_proto_hostapd_ecc
+sae_proto_hostapd_ffc
+sae_proto_hostapd_status_126
+sae_proto_hostapd_status_127
+sae_reflection_attack_ecc
+sae_reflection_attack_ecc_internal
+sae_commit_override
+sae_commit_override2
+sae_commit_invalid_scalar_element_ap
+sae_commit_invalid_element_ap
+sae_commit_invalid_scalar_element_sta
+sae_commit_invalid_element_sta
+sae_anti_clogging_proto
+sae_no_random
+sae_invalid_anti_clogging_token_req
+sae_password
+sae_password_short
+sae_password_long
+sae_connect_cmd
+sae_password_id
+sae_password_id_ecc
+sae_password_id_ffc
+sae_password_id_only
+sae_password_id_pwe_looping
+sae_password_id_pwe_check_ap
+sae_password_id_pwe_check_sta
+sae_forced_anti_clogging_pw_id
+sae_reauth
+sae_sync
+sae_confirm_immediate
+sae_confirm_immediate2
+sae_pwe_group_19
+sae_pwe_group_20
+sae_pwe_group_21
+sae_pwe_group_28
+sae_pwe_group_29
+sae_pwe_group_30
+sae_pwe_group_1
+sae_pwe_group_2
+sae_pwe_group_22
+sae_pwe_h2e_only_ap
+sae_pwe_h2e_only_ap_sta_forcing_loop
+sae_pwe_loop_only_ap
+sae_h2e_rejected_groups
+sae_h2e_rejected_groups_unexpected
+sae_h2e_password_id
+sae_pwe_in_psk_ap
+sae_auth_restart
+sae_rsne_mismatch
+sae_h2e_rsnxe_mismatch
+sae_h2e_rsnxe_mismatch_retries
+sae_h2e_rsnxe_mismatch_assoc
+sae_h2e_rsnxe_mismatch_ap
+sae_h2e_rsnxe_mismatch_ap2
+sae_h2e_rsnxe_mismatch_ap3
+sae_forced_anti_clogging_h2e
+sae_forced_anti_clogging_h2e_loop
+sae_okc
+sae_okc_sta_only
+sae_okc_pmk_lifetime
+sae_pmk_lifetime
+sae_and_psk_multiple_passwords
+sae_pmf_roam
+sae_ocv_pmk
+sae_ocv_pmk_failure
+sae_reject
+eap_tls_pkcs8_pkcs5_v2_des3
+eap_tls_pkcs8_pkcs5_v15
+eap_tls_session_resumption
+eap_tls_session_resumption_expiration
+eap_tls_session_resumption_radius
+eap_tls_sha512
+eap_tls_sha384
+eap_tls_ext_cert_check
+eap_tls_errors
+ap_wpa2_delayed_m3_retransmission
+ap_wpa2_delayed_m1_m3_retransmission
+ap_wpa2_delayed_m1_m3_retransmission2
+ap_wpa2_delayed_group_m1_retransmission
+ap_wpa2_delayed_group_m1_retransmission_igtk
+ap_wpa2_delayed_m1_m3_zero_tk
+ap_wpa2_plaintext_m1_m3
+ap_wpa2_plaintext_m1_m3_pmf
+ap_wpa2_plaintext_m3
+ap_wpa2_plaintext_group_m1
+ap_wpa2_plaintext_group_m1_pmf
+ap_wpa2_test_command_failures
+ap_wpa2_gtk_initial_rsc_tkip
+ap_wpa2_gtk_initial_rsc_ccmp
+ap_wpa2_gtk_initial_rsc_ccmp_256
+ap_wpa2_gtk_initial_rsc_gcmp
+ap_wpa2_gtk_initial_rsc_gcmp_256
+ap_wpa2_igtk_initial_rsc_aes_128_cmac
+ap_wpa2_igtk_initial_rsc_bip_gmac_128
+ap_wpa2_igtk_initial_rsc_bip_gmac_256
+ap_wpa2_igtk_initial_rsc_bip_cmac_256
+ap_wpa2_psk
+ap_wpa2_psk_file
+ap_wpa2_psk_file_keyid
+ap_wpa2_psk_mem
+ap_wpa2_ptk_rekey
+ap_wpa2_ptk_rekey_blocked_ap
+ap_wpa2_ptk_rekey_blocked_sta
+ap_wpa2_ptk_rekey_anonce
+ap_wpa2_ptk_rekey_ap
+ap_wpa2_sha256_ptk_rekey
+ap_wpa2_sha256_ptk_rekey_ap
+ap_wpa2_psk_file_errors
+ap_wpa2_psk_wildcard_ssid
+ap_wpa2_gtk_rekey
+ap_wpa2_gtk_rekey_request
+ap_wpa2_gtk_rekey_failure
+ap_wpa2_gtk_rekey_fail_1_sta
+ap_wpa2_gmk_rekey
+ap_wpa2_strict_rekey
+ap_wpa2_psk_ext
+ap_wpa2_psk_unexpected
+ap_wpa2_psk_ext_retry_msg_3
+ap_wpa2_psk_ext_retry_msg_3b
+ap_wpa2_psk_ext_retry_msg_3c
+ap_wpa2_psk_ext_retry_msg_3d
+ap_wpa2_psk_ext_retry_msg_3e
+ap_wpa2_psk_ext_delayed_ptk_rekey
+ap_wpa2_psk_ext_eapol
+ap_wpa2_psk_ext_eapol_retry1
+ap_wpa2_psk_ext_eapol_retry1b
+ap_wpa2_psk_ext_eapol_retry1c
+ap_wpa2_psk_ext_eapol_retry1d
+ap_wpa2_psk_ext_eapol_type_diff
+ap_wpa2_psk_ext_eapol_key_info
+ap_wpa2_psk_supp_proto
+ap_wpa2_psk_supp_proto_no_ie
+ap_wpa2_psk_supp_proto_ie_mismatch
+ap_wpa2_psk_supp_proto_ok
+ap_wpa2_psk_supp_proto_no_gtk
+ap_wpa2_psk_supp_proto_anonce_change
+ap_wpa2_psk_supp_proto_unexpected_group_msg
+ap_wpa2_psk_supp_proto_msg_1_invalid_kde
+ap_wpa2_psk_supp_proto_wrong_pairwise_key_len
+ap_wpa2_psk_supp_proto_wrong_group_key_len
+ap_wpa2_psk_supp_proto_gtk_tx_bit_workaround
+ap_wpa2_psk_supp_proto_gtk_keyidx_0_and_3
+ap_wpa2_psk_supp_proto_no_gtk_in_group_msg
+ap_wpa2_psk_supp_proto_too_long_gtk_in_group_msg
+ap_wpa2_psk_supp_proto_too_long_gtk_kde
+ap_wpa2_psk_supp_proto_gtk_not_encrypted
+ap_wpa2_psk_supp_proto_no_igtk
+ap_wpa2_psk_supp_proto_igtk_ok
+ap_wpa2_psk_supp_proto_igtk_keyid_swap
+ap_wpa2_psk_supp_proto_igtk_keyid_too_large
+ap_wpa2_psk_supp_proto_igtk_keyid_unexpected
+ap_wpa2_psk_wep
+ap_wpa2_psk_ifdown
+ap_wpa2_psk_drop_first_msg_4
+ap_wpa2_psk_disable_enable
+ap_wpa2_psk_incorrect_passphrase
+ap_wpa2_psk_no_random
+ap_wpa2_psk_assoc_rsn
+ap_wpa2_psk_ft_workaround
+ap_wpa2_psk_assoc_rsn_pmkid
+ap_wpa2_eapol_retry_limit
+ap_wpa2_disable_eapol_retry
+ap_wpa2_disable_eapol_retry_group
+ap_wpa2_psk_mic_0
+ap_wpa2_psk_local_error
+ap_wpa2_psk_inject_assoc
+ap_wpa2_psk_no_control_port
+ap_wpa2_psk_ap_control_port
+ap_wpa2_psk_ap_control_port_disabled
+ap_wpa2_psk_rsne_mismatch_ap
+ap_wpa2_psk_rsne_mismatch_ap2
+ap_wpa2_psk_rsne_mismatch_ap3
+ap_wpa2_psk_rsnxe_mismatch_ap
+ap_wpa2_psk_ext_key_id_ptk_rekey_ap0
+ap_wpa2_psk_ext_key_id_ptk_rekey_ap1
+ap_wpa2_psk_ext_key_id_ptk_rekey_ap2
+ap_wpa2_psk_ext_key_id_ptk_rekey_sta0
+ap_wpa2_psk_ext_key_id_ptk_rekey_sta1
+ap_wpa2_psk_ext_key_id_ptk_rekey_sta2
+ap_wpa2_eap_sim
+ap_wpa2_eap_sim_imsi_identity
+ap_wpa2_eap_sim_imsi_privacy_key
+ap_wpa2_eap_sim_imsi_privacy_attr
+ap_wpa2_eap_sim_sql
+ap_wpa2_eap_sim_config
+ap_wpa2_eap_sim_id_0
+ap_wpa2_eap_sim_id_1
+ap_wpa2_eap_sim_id_2
+ap_wpa2_eap_sim_id_3
+ap_wpa2_eap_sim_ext
+ap_wpa2_eap_sim_ext_replace_sim
+ap_wpa2_eap_sim_ext_replace_sim2
+ap_wpa2_eap_sim_ext_replace_sim3
+ap_wpa2_eap_sim_ext_auth_fail
+ap_wpa2_eap_sim_change_bssid
+ap_wpa2_eap_sim_no_change_set
+ap_wpa2_eap_sim_ext_anonymous
+ap_wpa2_eap_sim_ext_anonymous_no_pseudonym
+ap_wpa2_eap_sim_oom
+ap_wpa2_eap_aka
+ap_wpa2_eap_aka_imsi_identity
+ap_wpa2_eap_aka_imsi_privacy_key
+ap_wpa2_eap_aka_imsi_privacy_attr
+ap_wpa2_eap_aka_imsi_privacy_key_expired
+ap_wpa2_eap_aka_sql
+ap_wpa2_eap_aka_config
+ap_wpa2_eap_aka_ext
+ap_wpa2_eap_aka_ext_auth_fail
+ap_wpa2_eap_aka_prime
+ap_wpa2_eap_aka_prime_imsi_identity
+ap_wpa2_eap_aka_prime_imsi_privacy_key
+ap_wpa2_eap_aka_prime_sql
+ap_wpa2_eap_aka_prime_ext_auth_fail
+ap_wpa2_eap_aka_prime_ext
+ap_wpa2_eap_ttls_pap
+ap_wpa2_eap_ttls_pap_subject_match
+ap_wpa2_eap_ttls_pap_check_cert_subject
+ap_wpa2_eap_ttls_pap_incorrect_password
+ap_wpa2_eap_ttls_chap
+ap_wpa2_eap_ttls_chap_altsubject_match
+ap_wpa2_eap_ttls_chap_incorrect_password
+ap_wpa2_eap_ttls_mschap
+ap_wpa2_eap_ttls_mschap_incorrect_password
+ap_wpa2_eap_ttls_mschapv2
+ap_wpa2_eap_ttls_invalid_phase2
+ap_wpa2_eap_ttls_mschapv2_suffix_match
+ap_wpa2_eap_ttls_mschapv2_domain_match
+ap_wpa2_eap_ttls_mschapv2_incorrect_password
+ap_wpa2_eap_ttls_mschapv2_utf8
+ap_wpa2_eap_ttls_eap_gtc
+ap_wpa2_eap_ttls_eap_gtc_incorrect_password
+ap_wpa2_eap_ttls_eap_gtc_no_password
+ap_wpa2_eap_ttls_eap_gtc_server_oom
+ap_wpa2_eap_ttls_eap_gtc_oom
+ap_wpa2_eap_ttls_eap_md5
+ap_wpa2_eap_ttls_eap_md5_incorrect_password
+ap_wpa2_eap_ttls_eap_md5_no_password
+ap_wpa2_eap_ttls_eap_md5_server_oom
+ap_wpa2_eap_ttls_eap_mschapv2
+ap_wpa2_eap_ttls_eap_mschapv2_no_password
+ap_wpa2_eap_ttls_eap_mschapv2_server_oom
+ap_wpa2_eap_ttls_eap_sim
+ap_wpa2_eap_ttls_eap_sim_ext
+ap_wpa2_eap_ttls_eap_vendor
+ap_wpa2_eap_peap_eap_sim
+ap_wpa2_eap_peap_eap_sim_ext
+ap_wpa2_eap_fast_eap_sim_ext
+ap_wpa2_eap_ttls_eap_aka
+ap_wpa2_eap_peap_eap_aka
+ap_wpa2_eap_peap_eap_mschapv2
+ap_wpa2_eap_peap_eap_mschapv2_domain
+ap_wpa2_eap_peap_eap_mschapv2_incorrect_password
+ap_wpa2_eap_peap_crypto_binding
+ap_wpa2_eap_peap_crypto_binding_server_oom
+ap_wpa2_eap_peap_params
+ap_wpa2_eap_peap_eap_gtc
+ap_wpa2_eap_peap_eap_tls
+ap_wpa2_eap_peap_eap_vendor
+ap_wpa2_eap_tls
+ap_wpa2_eap_tls_blob
+ap_wpa2_eap_tls_blob_pem
+ap_wpa2_eap_tls_blob_missing
+ap_wpa2_eap_tls_with_tls_len
+ap_wpa2_eap_tls_pkcs12
+ap_wpa2_eap_tls_pkcs12_blob
+ap_wpa2_eap_tls_pkcs12_blob_pem
+ap_wpa2_eap_tls_diff_ca_trust
+ap_wpa2_eap_tls_diff_ca_trust2
+ap_wpa2_eap_tls_diff_ca_trust3
+ap_wpa2_eap_tls_neg_suffix_match
+ap_wpa2_eap_tls_neg_domain_match
+ap_wpa2_eap_tls_neg_subject_match
+ap_wpa2_eap_tls_neg_altsubject_match
+ap_wpa2_eap_unauth_tls
+ap_wpa2_eap_ttls_server_cert_hash
+ap_wpa2_eap_ttls_server_cert_hash_invalid
+ap_wpa2_eap_pwd
+ap_wpa2_eap_pwd_nthash
+ap_wpa2_eap_pwd_salt_sha1
+ap_wpa2_eap_pwd_salt_sha256
+ap_wpa2_eap_pwd_salt_sha512
+ap_wpa2_eap_pwd_groups
+ap_wpa2_eap_pwd_invalid_group
+ap_wpa2_eap_pwd_disabled_group
+ap_wpa2_eap_pwd_as_frag
+ap_wpa2_eap_gpsk
+ap_wpa2_eap_sake
+ap_wpa2_eap_eke
+ap_wpa2_eap_eke_many
+ap_wpa2_eap_eke_serverid_nai
+ap_wpa2_eap_eke_server_oom
+ap_wpa2_eap_ikev2
+ap_wpa2_eap_ikev2_as_frag
+ap_wpa2_eap_ikev2_oom
+ap_wpa2_eap_pax
+ap_wpa2_eap_psk
+ap_wpa2_eap_psk_oom
+ap_wpa2_eap_interactive
+ap_wpa2_eap_ext_enable_network_while_connected
+ap_wpa2_eap_vendor_test
+ap_wpa2_eap_vendor_test_oom
+ap_wpa2_eap_fast_gtc_identity_change
+ap_wpa2_eap_fast_eap_vendor
+ap_wpa2_eap_tls_ocsp
+ap_wpa2_eap_tls_ocsp_multi
+ap_wpa2_eap_tls_ocsp_key_id
+ap_wpa2_eap_tls_ocsp_ca_signed_good
+ap_wpa2_eap_tls_ocsp_ca_signed_revoked
+ap_wpa2_eap_tls_ocsp_ca_signed_unknown
+ap_wpa2_eap_tls_ocsp_server_signed
+ap_wpa2_eap_tls_ocsp_invalid_data
+ap_wpa2_eap_tls_ocsp_invalid
+ap_wpa2_eap_tls_ocsp_unknown_sign
+ap_wpa2_eap_tls_intermediate_ca
+ap_wpa2_eap_tls_ocsp_multi_revoked
+ap_wpa2_eap_tls_domain_suffix_match_cn_full
+ap_wpa2_eap_tls_domain_match_cn
+ap_wpa2_eap_tls_domain_suffix_match_cn
+ap_wpa2_eap_tls_domain_suffix_mismatch_cn
+ap_wpa2_eap_tls_domain_mismatch_cn
+ap_wpa2_eap_ttls_long_duration
+ap_wpa2_eap_ttls_server_cert_eku_client
+ap_wpa2_eap_ttls_server_cert_eku_client_server
+ap_wpa2_eap_ttls_server_pkcs12
+ap_wpa2_eap_ttls_server_pkcs12_extra
+ap_wpa2_eap_ttls_dh_params_server
+ap_wpa2_eap_ttls_dh_params_dsa_server
+ap_wpa2_eap_ttls_dh_params_not_found
+ap_wpa2_eap_ttls_dh_params_invalid
+ap_wpa2_eap_reauth
+ap_wpa2_eap_reauth_ptk_rekey_blocked_sta
+ap_wpa2_eap_request_identity_message
+ap_wpa2_eap_sim_aka_result_ind
+ap_wpa2_eap_sim_zero_db_timeout
+ap_wpa2_eap_too_many_roundtrips
+ap_wpa2_eap_too_many_roundtrips_server
+ap_wpa2_eap_too_many_roundtrips_server2
+ap_wpa2_eap_expanded_nak
+ap_wpa2_eap_sql
+ap_wpa2_eap_non_ascii_identity
+ap_wpa2_eap_non_ascii_identity2
+ap_wpa2_eap_unexpected_wep_eapol_key
+ap_wpa2_eap_session_ticket
+ap_wpa2_eap_no_workaround
+ap_wpa2_eap_tls_check_crl
+ap_wpa2_eap_tls_check_crl_not_strict
+ap_wpa2_eap_tls_crl_reload
+ap_wpa2_eap_tls_check_cert_subject
+ap_wpa2_eap_tls_check_cert_subject_neg
+ap_wpa2_eap_tls_oom
+ap_wpa2_eap_tls_macacl
+ap_wpa2_eap_oom
+ap_wpa2_eap_tls_13
+ap_wpa2_eap_tls_13_ocsp
+ap_wpa2_eap_tls_13_missing_prot_success
+ap_wpa2_eap_tls_13_fragmentation
+ap_wpa2_eap_ttls_13
+ap_wpa2_eap_peap_13
+ap_wpa2_eap_tls_13_ec
+ap_wpa2_eap_sim_db
+ap_wpa2_eap_sim_db_sqlite
+ap_wpa2_eap_assoc_rsn
+ap_wpa2_eap_status
+ap_wpa2_eap_gpsk_ptk_rekey_ap
+ap_wpa2_eap_wildcard_ssid
+ap_wpa2_eap_psk_mac_addr_change
+ap_wpa2_eap_server_get_id
+ap_wpa2_radius_server_get_id
+ap_wpa2_eap_tls_tod
+ap_wpa2_eap_tls_tod_tofu
+ap_wpa2_eap_sake_no_control_port
+ap_wpa2_tdls
+ap_wpa2_tdls_concurrent_init
+ap_wpa2_tdls_concurrent_init2
+ap_wpa2_tdls_decline_resp
+ap_wpa2_tdls_long_lifetime
+ap_wpa2_tdls_long_frame
+ap_wpa2_tdls_reneg
+ap_wpa2_tdls_wrong_lifetime_resp
+ap_wpa2_tdls_diff_rsnie
+ap_wpa2_tdls_wrong_tpk_m2_mic
+ap_wpa2_tdls_wrong_tpk_m3_mic
+ap_wpa2_tdls_double_tpk_m2
+ap_wpa2_tdls_responder_teardown
+dpp_network_intro_version
+dpp_network_intro_version_change
+dpp_network_intro_version_missing_req
+dpp_tcp_pkex
+dpp_tcp_pkex_auto_connect_2
+dpp_tcp_pkex_auto_connect_2_status
+dpp_tcp_pkex_auto_connect_2_status_fail
+dpp_tcp_pkex_while_associated
+dpp_tcp_pkex_while_associated_conn_status
+dpp_controller_relay_pkex
+dpp_push_button
+dpp_push_button_session_overlap_sta
+dpp_push_button_session_overlap_ap
+dpp_push_button_session_overlap_configurator
+dpp_push_button_2sta
+dpp_push_button_r_hash_mismatch_sta
+dpp_push_button_i_hash_mismatch_ap
+dpp_push_button_r_hash_mismatch_ap
+dpp_push_button_ext_conf
+dpp_push_button_wpas_conf
+dpp_private_peer_introduction
+dpp_qr_code_parsing
+dpp_uri_version
+dpp_uri_supported_curves
+dpp_uri_host
+dpp_qr_code_parsing_fail
+dpp_qr_code_curves
+dpp_qr_code_curves_brainpool
+dpp_qr_code_unsupported_curve
+dpp_qr_code_keygen_fail
+dpp_qr_code_curve_select
+dpp_qr_code_auth_broadcast
+dpp_configurator_enrollee
+dpp_configurator_enrollee_prime256v1
+dpp_configurator_enrollee_secp384r1
+dpp_configurator_enrollee_secp521r1
+dpp_configurator_enrollee_brainpoolP256r1
+dpp_configurator_enrollee_brainpoolP384r1
+dpp_configurator_enrollee_brainpoolP512r1
+dpp_configurator_enroll_conf
+dpp_qr_code_curve_prime256v1
+dpp_qr_code_curve_secp384r1
+dpp_qr_code_curve_secp521r1
+dpp_qr_code_curve_brainpoolP256r1
+dpp_qr_code_curve_brainpoolP384r1
+dpp_qr_code_curve_brainpoolP512r1
+dpp_qr_code_set_key
+dpp_qr_code_auth_mutual
+dpp_qr_code_auth_mutual2
+dpp_qr_code_auth_mutual_p_256
+dpp_qr_code_auth_mutual_p_384
+dpp_qr_code_auth_mutual_p_521
+dpp_qr_code_auth_mutual_bp_256
+dpp_qr_code_auth_mutual_bp_384
+dpp_qr_code_auth_mutual_bp_512
+dpp_auth_resp_retries
+dpp_qr_code_auth_mutual_not_used
+dpp_qr_code_auth_mutual_curve_mismatch
+dpp_qr_code_auth_hostapd_mutual2
+dpp_qr_code_listen_continue
+dpp_qr_code_auth_initiator_enrollee
+dpp_qr_code_auth_initiator_either_2
+dpp_qr_code_auth_initiator_either_3
+dpp_config_legacy
+dpp_config_legacy_psk_hex
+dpp_config_fragmentation
+dpp_config_legacy_gen
+dpp_config_legacy_gen_psk
+dpp_config_dpp_gen_prime256v1
+dpp_config_dpp_gen_secp384r1
+dpp_config_dpp_gen_secp521r1
+dpp_config_dpp_gen_expiry
+dpp_config_dpp_gen_expired_key
+dpp_config_dpp_gen_3rd_party
+dpp_config_dpp_override_prime256v1
+dpp_config_dpp_override_secp384r1
+dpp_config_override_objects
+dpp_config_signed_connector_error_no_dot_1
+dpp_config_signed_connector_error_no_dot_2
+dpp_config_signed_connector_error_unexpected_signature_len
+dpp_config_no_csign
+dpp_config_no_signed_connector
+dpp_config_unexpected_signed_connector_char
+dpp_config_root_not_an_object
+dpp_config_no_wi_fi_tech
+dpp_config_unsupported_wi_fi_tech
+dpp_config_no_discovery
+dpp_config_no_discovery_ssid
+dpp_config_too_long_discovery_ssid
+dpp_config_no_cred
+dpp_config_no_cred_akm
+dpp_config_unsupported_cred_akm
+dpp_config_error_legacy_no_pass
+dpp_config_error_legacy_too_long_pass
+dpp_config_error_legacy_psk_with_sae
+dpp_config_error_legacy_no_pass_for_sae
+dpp_config_error_legacy_invalid_psk
+dpp_config_error_legacy_too_short_psk
+dpp_config_connector_error_ext_sign
+dpp_config_connector_error_too_short_timestamp
+dpp_config_connector_error_invalid_timestamp
+dpp_config_connector_error_invalid_timestamp_date
+dpp_config_connector_error_invalid_time_zone
+dpp_config_connector_error_invalid_time_zone_2
+dpp_config_connector_error_expired_1
+dpp_config_connector_error_expired_2
+dpp_config_connector_error_expired_3
+dpp_config_connector_error_expired_4
+dpp_config_connector_error_expired_5
+dpp_config_connector_error_expired_6
+dpp_config_connector_error_no_groups
+dpp_config_connector_error_empty_groups
+dpp_config_connector_error_missing_group_id
+dpp_config_connector_error_missing_net_role
+dpp_config_connector_error_missing_net_access_key
+dpp_config_connector_error_net_access_key_mismatch
+dpp_akm_sha256
+dpp_akm_sha384
+dpp_akm_sha512
+dpp_network_introduction
+dpp_network_introduction_expired
+dpp_and_sae_akm
+dpp_ap_config
+dpp_ap_config_p256_p256
+dpp_ap_config_p256_p384
+dpp_ap_config_p384_p256
+dpp_ap_config_p384_p384
+dpp_ap_config_p521_p256
+dpp_ap_config_p521_p384
+dpp_ap_config_bp256_bp256
+dpp_ap_config_bp384_bp384
+dpp_ap_config_bp512_bp512
+dpp_ap_config_p256_bp256
+dpp_ap_config_bp256_p256
+dpp_ap_config_p521_bp512
+dpp_ap_config_reconfig_configurator
+dpp_auto_connect_1
+dpp_auto_connect_2
+dpp_auto_connect_2_connect_cmd
+dpp_auto_connect_2_sta_ver1
+dpp_auto_connect_2_ap_ver1
+dpp_auto_connect_2_ver1
+dpp_auto_connect_2_conf_ver1
+dpp_auto_connect_legacy
+dpp_auto_connect_legacy_ssid_charset
+dpp_auto_connect_legacy_sae_1
+dpp_auto_connect_legacy_sae_2
+dpp_auto_connect_legacy_psk_sae_1
+dpp_auto_connect_legacy_psk_sae_2
+dpp_auto_connect_legacy_psk_sae_3
+dpp_auto_connect_legacy_pmf_required
+dpp_qr_code_auth_responder_configurator
+dpp_qr_code_auth_responder_configurator_group_id
+dpp_qr_code_auth_enrollee_init_netrole
+dpp_qr_code_hostapd_init
+dpp_qr_code_hostapd_init_offchannel
+dpp_qr_code_hostapd_init_offchannel_neg_freq
+dpp_qr_code_hostapd_ignore_mismatch
+dpp_test_vector_p_256
+dpp_test_vector_p_256_b
+dpp_test_vector_p_521
+dpp_pkex
+dpp_pkex_v2
+dpp_pkex_p256
+dpp_pkex_p384
+dpp_pkex_p521
+dpp_pkex_bp256
+dpp_pkex_bp384
+dpp_pkex_bp512
+dpp_pkex_config
+dpp_pkex_no_identifier
+dpp_pkex_identifier_mismatch
+dpp_pkex_identifier_mismatch2
+dpp_pkex_identifier_mismatch3
+dpp_pkex_5ghz
+dpp_pkex_test_vector
+dpp_pkex_code_mismatch
+dpp_pkex_code_mismatch_limit
+dpp_pkex_curve_mismatch
+dpp_pkex_curve_mismatch_failure
+dpp_pkex_curve_mismatch_failure2
+dpp_pkex_exchange_resp_processing_failure
+dpp_pkex_commit_reveal_req_processing_failure
+dpp_pkex_config2
+dpp_pkex_no_responder
+dpp_pkex_after_retry
+dpp_pkex_hostapd_responder
+dpp_pkex_v2_hostapd_responder
+dpp_pkex_hostapd_initiator
+dpp_pkex_v2_hostapd_initiator
+dpp_pkex_hostapd_initiator_fallback
+dpp_pkex_hostapd_initiator_no_response
+dpp_pkex_hostapd_errors
+dpp_pkex_nak_curve_change
+dpp_pkex_nak_curve_change2
+dpp_hostapd_configurator
+dpp_hostapd_configurator_enrollee_v1
+dpp_hostapd_configurator_responder
+dpp_hostapd_configurator_fragmentation
+dpp_hostapd_enrollee_fragmentation
+dpp_hostapd_enrollee_gas_timeout
+dpp_hostapd_enrollee_gas_timeout_comeback
+dpp_hostapd_enrollee_gas_errors
+dpp_hostapd_enrollee_gas_proto
+dpp_hostapd_enrollee_gas_tx_status_errors
+dpp_hostapd_configurator_override_objects
+dpp_own_config
+dpp_own_config_group_id
+dpp_proto_after_wrapped_data_auth_req
+dpp_auth_req_stop_after_ack
+dpp_auth_req_retries
+dpp_auth_req_retries_multi_chan
+dpp_proto_after_wrapped_data_auth_resp
+dpp_proto_after_wrapped_data_auth_conf
+dpp_proto_after_wrapped_data_conf_req
+dpp_proto_after_wrapped_data_conf_resp
+dpp_proto_stop_at_pkex_exchange_resp
+dpp_proto_stop_at_pkex_cr_req
+dpp_proto_stop_at_pkex_cr_resp
+dpp_proto_network_introduction
+dpp_hostapd_auth_conf_timeout
+dpp_hostapd_auth_resp_retries
+dpp_tcp
+dpp_tcp_port
+dpp_tcp_mutual
+dpp_tcp_mutual_hostapd_conf
+dpp_tcp_conf_init
+dpp_tcp_conf_init_hostapd_enrollee
+dpp_tcp_controller_management_hostapd
+dpp_tcp_controller_management_hostapd2
+dpp_tcp_controller_start_failure
+dpp_tcp_init_failure
+dpp_controller_rx_failure
+dpp_controller_rx_errors
+dpp_conn_status_success
+dpp_conn_status_wrong_passphrase
+dpp_conn_status_no_ap
+dpp_conn_status_connector_mismatch
+dpp_conn_status_assoc_reject
+dpp_conn_status_success_hostapd_configurator
+dpp_mud_url
+dpp_mud_url_hostapd
+dpp_config_save
+dpp_config_save2
+dpp_config_save3
+dpp_nfc_uri
+dpp_nfc_uri_hostapd
+dpp_nfc_uri_hostapd_tag_read
+dpp_nfc_negotiated_handover
+dpp_nfc_negotiated_handover_diff_curve
+dpp_nfc_negotiated_handover_hostapd_sel
+dpp_nfc_negotiated_handover_hostapd_req
+dpp_nfc_errors_hostapd
+dpp_with_p2p_device
+dpp_pfs_ap_0
+dpp_pfs_ap_1
+dpp_pfs_ap_2
+dpp_pfs_connect_cmd
+dpp_pfs_connect_cmd_ap_2
+dpp_pfs_connect_cmd_ap_2_sae
+dpp_pfs_ap_0_sta_ver1
+dpp_pfs_errors
+dpp_qr_code_auth_rand_mac_addr
+dpp_enterprise
+dpp_enterprise_tcp
+dpp_enterprise_tcp2
+dpp_qr_code_config_event_initiator
+dpp_qr_code_config_event_initiator_set_comeback
+dpp_qr_code_config_event_initiator_slow
+dpp_qr_code_config_event_initiator_failure
+dpp_qr_code_config_event_initiator_no_response
+dpp_qr_code_config_event_initiator_both
+dpp_tcp_qr_code_config_event_initiator
+dpp_qr_code_config_event_responder
+dpp_discard_public_action
+

.github/workflows/hostap-files/configs/b607d2723e927a3446d89aed813f1aa6068186bb/wpa_supplicant.config

@@ -0,0 +1,163 @@
+#CC=ccache gcc
+
+#CONFIG_TLS=openssl
+CONFIG_TLS=wolfssl
+#CONFIG_TLS=internal
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+CONFIG_IEEE8021X_EAPOL=y
+
+CONFIG_ERP=y
+CONFIG_EAP_MD5=y
+CONFIG_MSCHAPV2=y
+CONFIG_EAP_TLS=y
+CONFIG_EAP_PEAP=y
+CONFIG_EAP_TTLS=y
+CONFIG_EAP_GTC=y
+CONFIG_EAP_OTP=y
+CONFIG_EAP_PSK=y
+CONFIG_EAP_PAX=y
+CONFIG_EAP_LEAP=y
+CONFIG_EAP_SIM=y
+CONFIG_EAP_AKA=y
+CONFIG_EAP_AKA_PRIME=y
+CONFIG_EAP_VENDOR_TEST=y
+CONFIG_EAP_TLV=y
+CONFIG_EAP_SAKE=y
+CONFIG_EAP_GPSK=y
+CONFIG_EAP_GPSK_SHA256=y
+CONFIG_EAP_EKE=y
+CONFIG_EAP_TNC=y
+CFLAGS += -DTNC_CONFIG_FILE=\"tnc/tnc_config\"
+LIBS += -rdynamic
+CONFIG_EAP_FAST=y
+CONFIG_EAP_TEAP=y
+CONFIG_EAP_IKEV2=y
+
+ifeq ($(CONFIG_TLS), openssl)
+CONFIG_EAP_PWD=y
+endif
+ifeq ($(CONFIG_TLS), wolfssl)
+CONFIG_EAP_PWD=y
+endif
+
+CONFIG_USIM_SIMULATOR=y
+CONFIG_SIM_SIMULATOR=y
+
+#CONFIG_PCSC=y
+CONFIG_IPV6=y
+CONFIG_DRIVER_NONE=y
+CONFIG_PKCS12=y
+CONFIG_CTRL_IFACE=unix
+
+CONFIG_WPA_CLI_EDIT=y
+
+CONFIG_OCSP=y
+
+#CONFIG_ELOOP_POLL=y
+
+CONFIG_CTRL_IFACE_DBUS_NEW=y
+CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+CONFIG_IEEE80211R=y
+CONFIG_IEEE80211AC=y
+CONFIG_IEEE80211AX=y
+
+CONFIG_OCV=y
+
+CONFIG_DEBUG_FILE=y
+
+CONFIG_WPS=y
+#CONFIG_WPS_STRICT=y
+CONFIG_WPS_UPNP=y
+CONFIG_WPS_NFC=y
+CONFIG_WPS_ER=y
+#CONFIG_WPS_REG_DISABLE_OPEN=y
+
+CONFIG_DRIVER_WEXT=y
+
+CONFIG_DRIVER_NL80211=y
+CFLAGS += -I/usr/include/libnl3
+CONFIG_LIBNL32=y
+
+CONFIG_IBSS_RSN=y
+
+CONFIG_AP=y
+CONFIG_MESH=y
+CONFIG_P2P=y
+CONFIG_WIFI_DISPLAY=y
+
+CONFIG_ACS=y
+
+CONFIG_BGSCAN_SIMPLE=y
+CONFIG_BGSCAN_LEARN=y
+
+CONFIG_WPA_TRACE=y
+CONFIG_WPA_TRACE_BFD=y
+
+CONFIG_TDLS=y
+CONFIG_TDLS_TESTING=y
+CONFIG_NO_RANDOM_POOL=y
+
+CONFIG_TLSV11=y
+CONFIG_TLSV12=y
+
+CONFIG_HT_OVERRIDES=y
+CONFIG_VHT_OVERRIDES=y
+CONFIG_HE_OVERRIDES=y
+
+CONFIG_DEBUG_LINUX_TRACING=y
+
+CONFIG_INTERWORKING=y
+CONFIG_HS20=y
+
+CONFIG_AUTOSCAN_EXPONENTIAL=y
+CONFIG_AUTOSCAN_PERIODIC=y
+
+CONFIG_EXT_PASSWORD_TEST=y
+CONFIG_EXT_PASSWORD_FILE=y
+
+CONFIG_EAP_UNAUTH_TLS=y
+
+CONFIG_SAE=y
+CONFIG_SAE_PK=y
+CFLAGS += -DALL_DH_GROUPS
+
+CONFIG_WNM=y
+
+CONFIG_FST=y
+CONFIG_FST_TEST=y
+
+CONFIG_TESTING_OPTIONS=y
+CONFIG_MODULE_TESTS=y
+
+CONFIG_SUITEB=y
+
+# AddressSanitizer (ASan) can be enabled by uncommenting the following lines.
+# This can be used as a more efficient memory error detector than valgrind
+# (though, with still some CPU and memory cost, so VM cases will need more
+# memory allocated for the guest).
+#CFLAGS += -fsanitize=address -O1 -fno-omit-frame-pointer -g
+#LIBS += -fsanitize=address -fno-omit-frame-pointer -g
+#LIBS_c += -fsanitize=address -fno-omit-frame-pointer -g
+#LIBS_p += -fsanitize=address -fno-omit-frame-pointer -g
+
+# Undefined Behavior Sanitizer (UBSan) can be enabled by uncommenting the
+# following lines.
+#CFLAGS += -Wno-format-nonliteral
+#CFLAGS += -fsanitize=undefined
+##CFLAGS += -fno-sanitize-recover
+#LIBS += -fsanitize=undefined
+##LIBS += -fno-sanitize-recover
+#LIBS_c += -fsanitize=undefined
+#LIBS_p += -fsanitize=undefined
+CONFIG_MBO=y
+CONFIG_FILS=y
+CONFIG_FILS_SK_PFS=y
+CONFIG_PMKSA_CACHE_EXTERNAL=y
+CONFIG_OWE=y
+CONFIG_DPP=y
+CONFIG_DPP2=y
+CONFIG_WEP=y
+CONFIG_PASN=y

.github/workflows/hostap-files/configs/hostap_2_10/hostapd.config

@@ -0,0 +1,119 @@
+#CC=ccache gcc
+
+CONFIG_DRIVER_NONE=y
+CONFIG_DRIVER_NL80211=y
+CONFIG_RSN_PREAUTH=y
+
+#CONFIG_TLS=internal
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+CONFIG_TLS=wolfssl
+
+CONFIG_EAP=y
+CONFIG_ERP=y
+CONFIG_EAP_MD5=y
+CONFIG_EAP_TLS=y
+CONFIG_EAP_MSCHAPV2=y
+CONFIG_EAP_PEAP=y
+CONFIG_EAP_GTC=y
+CONFIG_EAP_TTLS=y
+CONFIG_EAP_SIM=y
+CONFIG_EAP_AKA=y
+CONFIG_EAP_AKA_PRIME=y
+CONFIG_EAP_GPSK=y
+CONFIG_EAP_GPSK_SHA256=y
+CONFIG_EAP_SAKE=y
+CONFIG_EAP_PAX=y
+CONFIG_EAP_PSK=y
+CONFIG_EAP_VENDOR_TEST=y
+CONFIG_EAP_FAST=y
+#CONFIG_EAP_TEAP=y
+CONFIG_EAP_IKEV2=y
+CONFIG_EAP_TNC=y
+CFLAGS += -DTNC_CONFIG_FILE=\"tnc/tnc_config\"
+LIBS += -rdynamic
+CONFIG_EAP_UNAUTH_TLS=y
+ifeq ($(CONFIG_TLS), wolfssl)
+CONFIG_EAP_PWD=y
+endif
+ifeq ($(CONFIG_TLS), openssl)
+CONFIG_EAP_PWD=y
+endif
+CONFIG_EAP_EKE=y
+CONFIG_PKCS12=y
+CONFIG_RADIUS_SERVER=y
+CONFIG_IPV6=y
+CONFIG_TLSV11=y
+CONFIG_TLSV12=y
+
+CONFIG_FULL_DYNAMIC_VLAN=y
+CONFIG_VLAN_NETLINK=y
+CONFIG_LIBNL32=y
+CONFIG_LIBNL3_ROUTE=y
+CONFIG_IEEE80211R=y
+CONFIG_IEEE80211AC=y
+CONFIG_IEEE80211AX=y
+
+CONFIG_OCV=y
+
+CONFIG_WPS=y
+CONFIG_WPS_UPNP=y
+CONFIG_WPS_NFC=y
+#CONFIG_WPS_STRICT=y
+CONFIG_WPA_TRACE=y
+CONFIG_WPA_TRACE_BFD=y
+
+CONFIG_P2P_MANAGER=y
+CONFIG_DEBUG_FILE=y
+CONFIG_DEBUG_LINUX_TRACING=y
+CONFIG_WPA_CLI_EDIT=y
+CONFIG_ACS=y
+CONFIG_NO_RANDOM_POOL=y
+CONFIG_WNM=y
+CONFIG_INTERWORKING=y
+CONFIG_HS20=y
+CONFIG_SQLITE=y
+CONFIG_SAE=y
+#CONFIG_SAE_PK=y
+CFLAGS += -DALL_DH_GROUPS
+
+CONFIG_FST=y
+CONFIG_FST_TEST=y
+
+CONFIG_TESTING_OPTIONS=y
+CFLAGS += -DCONFIG_RADIUS_TEST
+CONFIG_MODULE_TESTS=y
+
+CONFIG_SUITEB=y
+
+# AddressSanitizer (ASan) can be enabled by uncommenting the following lines.
+# This can be used as a more efficient memory error detector than valgrind
+# (though, with still some CPU and memory cost, so VM cases will need more
+# memory allocated for the guest).
+#CFLAGS += -fsanitize=address -O1 -fno-omit-frame-pointer -g
+#LIBS += -fsanitize=address -fno-omit-frame-pointer -g
+#LIBS_h += -fsanitize=address -fno-omit-frame-pointer -g
+#LIBS_n += -fsanitize=address -fno-omit-frame-pointer -g
+#LIBS_c += -fsanitize=address -fno-omit-frame-pointer -g
+
+# Undefined Behavior Sanitizer (UBSan) can be enabled by uncommenting the
+# following lines.
+#CFLAGS += -Wno-format-nonliteral
+#CFLAGS += -fsanitize=undefined
+##CFLAGS += -fno-sanitize-recover
+#LIBS += -fsanitize=undefined
+##LIBS += -fno-sanitize-recover
+#LIBS_h += -fsanitize=undefined
+#LIBS_n += -fsanitize=undefined
+#LIBS_c += -fsanitize=undefined
+CONFIG_MBO=y
+
+CONFIG_TAXONOMY=y
+CONFIG_FILS=y
+CONFIG_FILS_SK_PFS=y
+CONFIG_OWE=y
+#CONFIG_DPP=y
+#CONFIG_DPP2=y
+CONFIG_WEP=y
+CONFIG_PASN=y
+CONFIG_AIRTIME_POLICY=y

.github/workflows/hostap-files/configs/hostap_2_10/tests

@@ -0,0 +1,284 @@
+sae
+sae_password_ecc
+sae_pmksa_caching
+sae_pmksa_caching_pmkid
+sae_pmksa_caching_disabled
+sae_groups
+sae_group_nego
+sae_group_nego_no_match
+sae_anti_clogging
+sae_forced_anti_clogging
+sae_mixed
+sae_and_psk
+sae_and_psk2
+sae_wpa3_roam
+sae_mixed_mfp
+sae_mfp
+sae_missing_password
+sae_key_lifetime_in_memory
+sae_oom_wpas
+sae_proto_ecc
+sae_proto_ffc
+sae_proto_commit_delayed
+sae_proto_commit_replay
+sae_proto_confirm_replay
+sae_proto_hostapd
+sae_proto_hostapd_ecc
+sae_proto_hostapd_ffc
+sae_proto_hostapd_status_126
+sae_proto_hostapd_status_127
+sae_reflection_attack_ecc
+sae_reflection_attack_ecc_internal
+sae_commit_override
+sae_commit_override2
+sae_commit_invalid_scalar_element_ap
+sae_commit_invalid_element_ap
+sae_commit_invalid_scalar_element_sta
+sae_commit_invalid_element_sta
+sae_anti_clogging_proto
+sae_no_random
+sae_bignum_failure_unsafe_group
+sae_invalid_anti_clogging_token_req
+sae_password
+sae_password_short
+sae_password_long
+sae_connect_cmd
+sae_password_id
+sae_password_id_ecc
+sae_password_id_ffc
+sae_password_id_only
+sae_password_id_pwe_looping
+sae_password_id_pwe_check_ap
+sae_password_id_pwe_check_sta
+sae_forced_anti_clogging_pw_id
+sae_reauth
+sae_sync
+sae_confirm_immediate
+sae_confirm_immediate2
+sae_pwe_group_19
+sae_pwe_group_20
+sae_pwe_group_21
+sae_pwe_group_1
+sae_pwe_group_2
+sae_pwe_group_22
+sae_pwe_h2e_only_ap
+sae_pwe_h2e_only_ap_sta_forcing_loop
+sae_pwe_loop_only_ap
+sae_h2e_rejected_groups
+sae_h2e_rejected_groups_unexpected
+sae_h2e_password_id
+sae_pwe_in_psk_ap
+sae_auth_restart
+sae_rsne_mismatch
+sae_h2e_rsnxe_mismatch
+sae_h2e_rsnxe_mismatch_retries
+sae_h2e_rsnxe_mismatch_assoc
+sae_h2e_rsnxe_mismatch_ap
+sae_h2e_rsnxe_mismatch_ap2
+sae_h2e_rsnxe_mismatch_ap3
+sae_forced_anti_clogging_h2e
+sae_forced_anti_clogging_h2e_loop
+sae_okc
+sae_okc_sta_only
+sae_okc_pmk_lifetime
+sae_pmk_lifetime
+sae_and_psk_multiple_passwords
+sae_pmf_roam
+sae_ocv_pmk
+sae_ocv_pmk_failure
+sae_reject
+eap_tls_pkcs8_pkcs5_v2_des3
+eap_tls_pkcs8_pkcs5_v15
+eap_tls_sha512
+eap_tls_sha384
+eap_tls_errors
+eap_proto_peap_errors_server
+eap_proto_peap_errors
+ap_wpa2_delayed_m3_retransmission
+ap_wpa2_delayed_m1_m3_retransmission
+ap_wpa2_delayed_m1_m3_retransmission2
+ap_wpa2_delayed_group_m1_retransmission
+ap_wpa2_delayed_group_m1_retransmission_igtk
+ap_wpa2_delayed_m1_m3_zero_tk
+ap_wpa2_plaintext_m1_m3
+ap_wpa2_plaintext_m1_m3_pmf
+ap_wpa2_plaintext_m3
+ap_wpa2_plaintext_group_m1
+ap_wpa2_plaintext_group_m1_pmf
+ap_wpa2_test_command_failures
+ap_wpa2_gtk_initial_rsc_tkip
+ap_wpa2_gtk_initial_rsc_ccmp
+ap_wpa2_gtk_initial_rsc_ccmp_256
+ap_wpa2_gtk_initial_rsc_gcmp
+ap_wpa2_gtk_initial_rsc_gcmp_256
+ap_wpa2_igtk_initial_rsc_aes_128_cmac
+ap_wpa2_igtk_initial_rsc_bip_gmac_128
+ap_wpa2_igtk_initial_rsc_bip_gmac_256
+ap_wpa2_igtk_initial_rsc_bip_cmac_256
+ap_wpa2_psk
+ap_wpa2_psk_file
+ap_wpa2_psk_file_keyid
+ap_wpa2_psk_mem
+ap_wpa2_ptk_rekey
+ap_wpa2_ptk_rekey_blocked_ap
+ap_wpa2_ptk_rekey_blocked_sta
+ap_wpa2_ptk_rekey_anonce
+ap_wpa2_ptk_rekey_ap
+ap_wpa2_sha256_ptk_rekey
+ap_wpa2_sha256_ptk_rekey_ap
+ap_wpa2_psk_file_errors
+ap_wpa2_psk_wildcard_ssid
+ap_wpa2_gtk_rekey
+ap_wpa2_gtk_rekey_request
+ap_wpa2_gtk_rekey_failure
+ap_wpa2_gmk_rekey
+ap_wpa2_strict_rekey
+ap_wpa2_psk_ext
+ap_wpa2_psk_unexpected
+ap_wpa2_psk_ext_retry_msg_3
+ap_wpa2_psk_ext_retry_msg_3b
+ap_wpa2_psk_ext_retry_msg_3c
+ap_wpa2_psk_ext_retry_msg_3d
+ap_wpa2_psk_ext_retry_msg_3e
+ap_wpa2_psk_ext_delayed_ptk_rekey
+ap_wpa2_psk_ext_eapol
+ap_wpa2_psk_ext_eapol_retry1
+ap_wpa2_psk_ext_eapol_retry1b
+ap_wpa2_psk_ext_eapol_retry1c
+ap_wpa2_psk_ext_eapol_retry1d
+ap_wpa2_psk_ext_eapol_type_diff
+ap_wpa2_psk_ext_eapol_key_info
+ap_wpa2_psk_wep
+ap_wpa2_psk_ifdown
+ap_wpa2_psk_drop_first_msg_4
+ap_wpa2_psk_disable_enable
+ap_wpa2_psk_incorrect_passphrase
+ap_wpa2_psk_no_random
+ap_wpa2_psk_assoc_rsn
+ap_wpa2_psk_ft_workaround
+ap_wpa2_psk_assoc_rsn_pmkid
+ap_wpa2_eapol_retry_limit
+ap_wpa2_disable_eapol_retry
+ap_wpa2_disable_eapol_retry_group
+ap_wpa2_psk_mic_0
+ap_wpa2_psk_local_error
+ap_wpa2_psk_inject_assoc
+ap_wpa2_psk_no_control_port
+ap_wpa2_psk_ap_control_port
+ap_wpa2_psk_ap_control_port_disabled
+ap_wpa2_psk_rsne_mismatch_ap
+ap_wpa2_psk_rsne_mismatch_ap2
+ap_wpa2_psk_rsne_mismatch_ap3
+ap_wpa2_psk_rsnxe_mismatch_ap
+ap_wpa2_psk_ext_key_id_ptk_rekey_ap0
+ap_wpa2_psk_ext_key_id_ptk_rekey_ap1
+ap_wpa2_psk_ext_key_id_ptk_rekey_ap2
+ap_wpa2_psk_ext_key_id_ptk_rekey_sta0
+ap_wpa2_psk_ext_key_id_ptk_rekey_sta1
+ap_wpa2_psk_ext_key_id_ptk_rekey_sta2
+ap_wpa2_eap_sim
+ap_wpa2_eap_sim_sql
+ap_wpa2_eap_sim_config
+ap_wpa2_eap_sim_id_0
+ap_wpa2_eap_sim_id_1
+ap_wpa2_eap_sim_id_2
+ap_wpa2_eap_sim_id_3
+ap_wpa2_eap_sim_ext
+ap_wpa2_eap_sim_ext_replace_sim
+ap_wpa2_eap_sim_ext_replace_sim2
+ap_wpa2_eap_sim_ext_replace_sim3
+ap_wpa2_eap_sim_ext_auth_fail
+ap_wpa2_eap_sim_change_bssid
+ap_wpa2_eap_sim_no_change_set
+ap_wpa2_eap_sim_ext_anonymous
+ap_wpa2_eap_sim_ext_anonymous_no_pseudonym
+ap_wpa2_eap_sim_oom
+ap_wpa2_eap_aka
+ap_wpa2_eap_aka_sql
+ap_wpa2_eap_aka_config
+ap_wpa2_eap_aka_ext
+ap_wpa2_eap_aka_ext_auth_fail
+ap_wpa2_eap_aka_prime
+ap_wpa2_eap_aka_prime_sql
+ap_wpa2_eap_aka_prime_ext_auth_fail
+ap_wpa2_eap_aka_prime_ext
+ap_wpa2_eap_ttls_invalid_phase2
+ap_wpa2_eap_ttls_eap_vendor
+ap_wpa2_eap_fast_eap_sim
+ap_wpa2_eap_fast_eap_aka
+ap_wpa2_eap_peap_params
+ap_wpa2_eap_peap_eap_gtc
+ap_wpa2_eap_peap_eap_vendor
+ap_wpa2_eap_ttls_server_cert_hash
+ap_wpa2_eap_ttls_server_cert_hash_invalid
+ap_wpa2_eap_pwd
+ap_wpa2_eap_pwd_nthash
+ap_wpa2_eap_pwd_salt_sha1
+ap_wpa2_eap_pwd_salt_sha256
+ap_wpa2_eap_pwd_salt_sha512
+ap_wpa2_eap_pwd_groups
+ap_wpa2_eap_pwd_invalid_group
+ap_wpa2_eap_pwd_disabled_group
+ap_wpa2_eap_pwd_as_frag
+ap_wpa2_eap_gpsk
+ap_wpa2_eap_sake
+ap_wpa2_eap_ikev2
+ap_wpa2_eap_ikev2_as_frag
+ap_wpa2_eap_ikev2_oom
+ap_wpa2_eap_pax
+ap_wpa2_eap_psk
+ap_wpa2_eap_psk_oom
+ap_wpa2_eap_interactive
+ap_wpa2_eap_ext_enable_network_while_connected
+ap_wpa2_eap_vendor_test
+ap_wpa2_eap_vendor_test_oom
+ap_wpa2_eap_ttls_ocsp_revoked
+ap_wpa2_eap_ttls_ocsp_unknown
+ap_wpa2_eap_ttls_optional_ocsp_unknown
+ap_wpa2_eap_ttls_long_duration
+ap_wpa2_eap_ttls_server_cert_eku_client
+ap_wpa2_eap_ttls_server_cert_eku_client_server
+ap_wpa2_eap_ttls_dh_params
+ap_wpa2_eap_ttls_dh_params_dsa
+ap_wpa2_eap_ttls_dh_params_not_found
+ap_wpa2_eap_ttls_dh_params_invalid
+ap_wpa2_eap_ttls_dh_params_blob
+ap_wpa2_eap_ttls_dh_params_server
+ap_wpa2_eap_ttls_dh_params_dsa_server
+ap_wpa2_eap_reauth
+ap_wpa2_eap_reauth_ptk_rekey_blocked_sta
+ap_wpa2_eap_request_identity_message
+ap_wpa2_eap_sim_aka_result_ind
+ap_wpa2_eap_sim_zero_db_timeout
+ap_wpa2_eap_too_many_roundtrips
+ap_wpa2_eap_too_many_roundtrips_server
+ap_wpa2_eap_too_many_roundtrips_server2
+ap_wpa2_eap_expanded_nak
+ap_wpa2_eap_sql
+ap_wpa2_eap_non_ascii_identity
+ap_wpa2_eap_non_ascii_identity2
+ap_wpa2_eap_unexpected_wep_eapol_key
+ap_wpa2_eap_oom
+ap_wpa2_eap_sim_db
+ap_wpa2_eap_sim_db_sqlite
+ap_wpa2_eap_assoc_rsn
+ap_wpa2_eap_status
+ap_wpa2_eap_gpsk_ptk_rekey_ap
+ap_wpa2_eap_wildcard_ssid
+ap_wpa2_eap_psk_mac_addr_change
+ap_wpa2_eap_server_get_id
+ap_wpa2_radius_server_get_id
+ap_wpa2_eap_sake_no_control_port
+ap_wpa2_tdls
+ap_wpa2_tdls_concurrent_init
+ap_wpa2_tdls_concurrent_init2
+ap_wpa2_tdls_decline_resp
+ap_wpa2_tdls_long_lifetime
+ap_wpa2_tdls_long_frame
+ap_wpa2_tdls_reneg
+ap_wpa2_tdls_wrong_lifetime_resp
+ap_wpa2_tdls_diff_rsnie
+ap_wpa2_tdls_wrong_tpk_m2_mic
+ap_wpa2_tdls_wrong_tpk_m3_mic
+ap_wpa2_tdls_double_tpk_m2
+ap_wpa2_tdls_responder_teardown

.github/workflows/hostap-files/configs/hostap_2_10/wpa_supplicant.config

@@ -0,0 +1,163 @@
+#CC=ccache gcc
+
+#CONFIG_TLS=openssl
+CONFIG_TLS=wolfssl
+#CONFIG_TLS=internal
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+CONFIG_IEEE8021X_EAPOL=y
+
+CONFIG_ERP=y
+CONFIG_EAP_MD5=y
+CONFIG_MSCHAPV2=y
+CONFIG_EAP_TLS=y
+CONFIG_EAP_PEAP=y
+CONFIG_EAP_TTLS=y
+CONFIG_EAP_GTC=y
+CONFIG_EAP_OTP=y
+CONFIG_EAP_PSK=y
+CONFIG_EAP_PAX=y
+CONFIG_EAP_LEAP=y
+CONFIG_EAP_SIM=y
+CONFIG_EAP_AKA=y
+CONFIG_EAP_AKA_PRIME=y
+CONFIG_EAP_VENDOR_TEST=y
+CONFIG_EAP_TLV=y
+CONFIG_EAP_SAKE=y
+CONFIG_EAP_GPSK=y
+CONFIG_EAP_GPSK_SHA256=y
+CONFIG_EAP_EKE=y
+CONFIG_EAP_TNC=y
+CFLAGS += -DTNC_CONFIG_FILE=\"tnc/tnc_config\"
+LIBS += -rdynamic
+CONFIG_EAP_FAST=y
+#CONFIG_EAP_TEAP=y
+CONFIG_EAP_IKEV2=y
+
+ifeq ($(CONFIG_TLS), wolfssl)
+CONFIG_EAP_PWD=y
+endif
+ifeq ($(CONFIG_TLS), openssl)
+CONFIG_EAP_PWD=y
+endif
+
+CONFIG_USIM_SIMULATOR=y
+CONFIG_SIM_SIMULATOR=y
+
+#CONFIG_PCSC=y
+CONFIG_IPV6=y
+CONFIG_DRIVER_NONE=y
+CONFIG_PKCS12=y
+CONFIG_CTRL_IFACE=unix
+
+CONFIG_WPA_CLI_EDIT=y
+
+CONFIG_OCSP=y
+
+#CONFIG_ELOOP_POLL=y
+
+CONFIG_CTRL_IFACE_DBUS_NEW=y
+CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+CONFIG_IEEE80211R=y
+CONFIG_IEEE80211AC=y
+CONFIG_IEEE80211AX=y
+
+CONFIG_OCV=y
+
+CONFIG_DEBUG_FILE=y
+
+CONFIG_WPS=y
+#CONFIG_WPS_STRICT=y
+CONFIG_WPS_UPNP=y
+CONFIG_WPS_NFC=y
+CONFIG_WPS_ER=y
+#CONFIG_WPS_REG_DISABLE_OPEN=y
+
+CONFIG_DRIVER_WEXT=y
+
+CONFIG_DRIVER_NL80211=y
+CFLAGS += -I/usr/include/libnl3
+CONFIG_LIBNL32=y
+
+CONFIG_IBSS_RSN=y
+
+CONFIG_AP=y
+CONFIG_MESH=y
+CONFIG_P2P=y
+CONFIG_WIFI_DISPLAY=y
+
+CONFIG_ACS=y
+
+CONFIG_BGSCAN_SIMPLE=y
+CONFIG_BGSCAN_LEARN=y
+
+CONFIG_WPA_TRACE=y
+CONFIG_WPA_TRACE_BFD=y
+
+CONFIG_TDLS=y
+CONFIG_TDLS_TESTING=y
+CONFIG_NO_RANDOM_POOL=y
+
+CONFIG_TLSV11=y
+CONFIG_TLSV12=y
+
+CONFIG_HT_OVERRIDES=y
+CONFIG_VHT_OVERRIDES=y
+CONFIG_HE_OVERRIDES=y
+
+CONFIG_DEBUG_LINUX_TRACING=y
+
+CONFIG_INTERWORKING=y
+CONFIG_HS20=y
+
+CONFIG_AUTOSCAN_EXPONENTIAL=y
+CONFIG_AUTOSCAN_PERIODIC=y
+
+CONFIG_EXT_PASSWORD_TEST=y
+CONFIG_EXT_PASSWORD_FILE=y
+
+CONFIG_EAP_UNAUTH_TLS=y
+
+CONFIG_SAE=y
+#CONFIG_SAE_PK=y
+CFLAGS += -DALL_DH_GROUPS
+
+CONFIG_WNM=y
+
+CONFIG_FST=y
+CONFIG_FST_TEST=y
+
+CONFIG_TESTING_OPTIONS=y
+CONFIG_MODULE_TESTS=y
+
+CONFIG_SUITEB=y
+
+# AddressSanitizer (ASan) can be enabled by uncommenting the following lines.
+# This can be used as a more efficient memory error detector than valgrind
+# (though, with still some CPU and memory cost, so VM cases will need more
+# memory allocated for the guest).
+#CFLAGS += -fsanitize=address -O1 -fno-omit-frame-pointer -g
+#LIBS += -fsanitize=address -fno-omit-frame-pointer -g
+#LIBS_c += -fsanitize=address -fno-omit-frame-pointer -g
+#LIBS_p += -fsanitize=address -fno-omit-frame-pointer -g
+
+# Undefined Behavior Sanitizer (UBSan) can be enabled by uncommenting the
+# following lines.
+#CFLAGS += -Wno-format-nonliteral
+#CFLAGS += -fsanitize=undefined
+##CFLAGS += -fno-sanitize-recover
+#LIBS += -fsanitize=undefined
+##LIBS += -fno-sanitize-recover
+#LIBS_c += -fsanitize=undefined
+#LIBS_p += -fsanitize=undefined
+CONFIG_MBO=y
+CONFIG_FILS=y
+CONFIG_FILS_SK_PFS=y
+CONFIG_PMKSA_CACHE_EXTERNAL=y
+CONFIG_OWE=y
+#CONFIG_DPP=y
+#CONFIG_DPP2=y
+CONFIG_WEP=y
+CONFIG_PASN=y

.github/workflows/hostap-files/dbus-wpa_supplicant.conf

@@ -0,0 +1,23 @@
+<!DOCTYPE busconfig PUBLIC
+ "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
+ "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
+<busconfig>
+  <policy user="root">
+    <allow own="fi.epitest.hostap.WPASupplicant"/>
+    <allow send_destination="fi.epitest.hostap.WPASupplicant"/>
+    <allow send_interface="fi.epitest.hostap.WPASupplicant"/>
+    <allow own="fi.w1.wpa_supplicant1"/>
+    <allow send_destination="fi.w1.wpa_supplicant1"/>
+    <allow send_interface="fi.w1.wpa_supplicant1"/>
+    <allow receive_sender="fi.w1.wpa_supplicant1" receive_type="signal"/>
+  </policy>
+  <policy context="default">
+    <deny own="fi.epitest.hostap.WPASupplicant"/>
+    <deny send_destination="fi.epitest.hostap.WPASupplicant"/>
+    <deny send_interface="fi.epitest.hostap.WPASupplicant"/>
+    <deny own="fi.w1.wpa_supplicant1"/>
+    <deny send_destination="fi.w1.wpa_supplicant1"/>
+    <deny send_interface="fi.w1.wpa_supplicant1"/>
+    <deny receive_sender="fi.w1.wpa_supplicant1" receive_type="signal"/>
+  </policy>
+</busconfig>

.github/workflows/hostap.yml

@@ -0,0 +1,279 @@
+name: hostap and wpa-supplicant Tests
+
+on:
+  workflow_call:
+
+jobs:
+  build_wolfssl:
+    strategy:
+      matrix:
+        include:
+          - build_id: hostap-build1
+            wolf_extra_config: --disable-tls13
+          - build_id: hostap-build2
+            wolf_extra_config: --enable-brainpool --enable-wpas-dpp
+    name: Build wolfSSL
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-20.04
+    steps:
+        # No way to view the full strategy in the browser (really weird)
+      - name: Print strategy
+        run: |
+          cat <<EOF
+          ${{ toJSON(matrix) }}
+          EOF
+
+      - if: ${{ runner.debug }}
+        name: Enable wolfSSL debug logging
+        run: |
+          echo "wolf_debug_flags=--enable-debug" >> $GITHUB_ENV
+
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: >-
+            --enable-wpas CFLAGS=-DWOLFSSL_STATIC_RSA
+            ${{ env.wolf_debug_flags }} ${{ matrix.wolf_extra_config }}
+          install: true
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v3
+        with:
+          name: ${{ matrix.build_id }}
+          path: build-dir
+          retention-days: 1
+
+  # Build wpa_supplicant with wolfSSL and hostapd with OpenSSL and interop.
+  hostap_test:
+    strategy:
+      fail-fast: false
+      matrix:
+        # should hostapd be compiled with wolfssl
+        hostapd: [true, false]
+        # should wpa_supplicant be compiled with wolfssl
+        wpa_supplicant: [true, false]
+        # Fix the versions of hostap and osp to not break testing when a new
+        # patch is added in to osp. hostap_cherry_pick is used to apply the
+        # commit that updates the certificates used for testing. Tests are read
+        # from the corresponding configs/hostap_ref/tests file.
+        config: [
+          {
+            hostap_ref: hostap_2_10,
+            hostap_cherry_pick: 5679ec5c3dda25a0547a5f66407fd9b0b55fd04a,
+            remove_teap: true,
+            # TLS 1.3 does not work for this version
+            build_id: hostap-build1,
+          },
+          # Test the dpp patch
+          {
+            hostap_ref: b607d2723e927a3446d89aed813f1aa6068186bb,
+            hostap_cherry_pick: 5679ec5c3dda25a0547a5f66407fd9b0b55fd04a,
+            osp_ref: ad5b52a49b3cc2a5bfb47ccc1d6a5137132e9446,
+            build_id: hostap-build2
+          },
+        ]
+        # parallelize the tests to be able to run all tests within 10 minutes
+        # Update the <total server> in the ./run-tests.py step when changing.
+        server: [1, 2, 3, 4, 5]
+        exclude:
+          # don't test openssl on both sides
+          - hostapd: false
+            wpa_supplicant: false
+          # no hostapd support for dpp yet
+          - hostapd: true
+            config: {
+              hostap_ref: b607d2723e927a3446d89aed813f1aa6068186bb,
+              osp_ref: ad5b52a49b3cc2a5bfb47ccc1d6a5137132e9446,
+              build_id: hostap-build2
+            }
+    name: hwsim test
+    # For openssl 1.1
+    runs-on: ubuntu-20.04
+    needs: build_wolfssl
+    steps:
+        # No way to view the full strategy in the browser (really weird)
+      - name: Print strategy
+        run: |
+          cat <<EOF
+          ${{ toJSON(matrix) }}
+          EOF
+
+      - name: Print computed job run ID
+        run: |
+          SHA_SUM=$(sha256sum << 'END_OF_HEREDOC' | cut -d " " -f 1
+          ${{ toJSON(github) }}
+          END_OF_HEREDOC
+          )
+          echo "our_job_run_id=$SHA_SUM" >> $GITHUB_ENV
+          echo Our job run ID is $SHA_SUM
+
+      - name: Checkout wolfSSL
+        uses: actions/checkout@v3
+        with:
+          path: wolfssl
+
+      - name: Install dependencies
+        run: |
+          # Don't prompt for anything
+          export DEBIAN_FRONTEND=noninteractive
+          sudo apt-get update
+          # hostap dependencies
+          sudo apt-get install -y libpcap0.8 libpcap-dev curl libcurl4-openssl-dev \
+            libnl-3-dev binutils-dev libssl-dev libiberty-dev libnl-genl-3-dev \
+            libnl-route-3-dev libdbus-1-dev linux-modules-extra-`uname -r` \
+            bridge-utils
+          sudo pip3 install pycryptodome
+
+      - name: Enable mac80211
+        run: |
+          sudo modprobe mac80211
+          lsmod | grep mac80211
+
+      - if: ${{ runner.debug }}
+        name: Enable hostap debug logging
+        run: |
+          echo "hostap_debug_flags=-d" >> $GITHUB_ENV
+
+      - name: Download lib
+        uses: actions/download-artifact@v3
+        with:
+          name: ${{ matrix.config.build_id }}
+          path: build-dir
+
+      - name: Setup d-bus
+        working-directory: wolfssl/.github/workflows/hostap-files
+        run: |
+          sudo cp dbus-wpa_supplicant.conf /usr/share/dbus-1/system.d/wpa_supplicant.conf
+          sudo service dbus reload
+
+        # This is super hack-ish :P
+        # If you are trying to reproduce this on a more generic system, you can
+        # just run `sudo apt install linux-modules-extra-$(uname -r)` and
+        # this should have the module in the package. No need to compile it.
+      - name: Compile and install mac80211_hwsim
+        working-directory: wolfssl/.github/workflows/hostap-files
+        run: |
+          # The tag will be the first two numbers of from uname -r
+          LINUX_TAG=$(uname -r | grep -oP '^\d+\.\d+')
+          # Download the correct version of the driver
+          wget https://raw.githubusercontent.com/torvalds/linux/v$LINUX_TAG/drivers/net/wireless/mac80211_hwsim.c
+          wget https://raw.githubusercontent.com/torvalds/linux/v$LINUX_TAG/drivers/net/wireless/mac80211_hwsim.h
+          make
+          sudo make install
+          sudo modprobe mac80211_hwsim
+          lsmod | grep mac80211_hwsim
+          sudo rmmod mac80211_hwsim
+
+      - name: Checkout hostap
+        uses: actions/checkout@v3
+        with:
+          repository: julek-wolfssl/hostap-mirror 
+          path: hostap
+          ref: ${{ matrix.config.hostap_ref }}
+          # necessary for cherry pick step
+          fetch-depth: 0
+
+      - if: ${{ matrix.config.hostap_cherry_pick }}
+        name: Cherry pick certificate update
+        working-directory: hostap
+        run: git cherry-pick -n -X theirs ${{ matrix.config.hostap_cherry_pick }}
+
+      - if: ${{ matrix.config.osp_ref }}
+        name: Checkout OSP
+        uses: actions/checkout@v3
+        with:
+          repository: wolfssl/osp
+          path: osp
+          ref: ${{ matrix.config.osp_ref }}
+
+      - if: ${{ matrix.config.osp_ref }}
+        name: Apply patch files
+        working-directory: hostap
+        run: |
+          for f in $GITHUB_WORKSPACE/osp/hostap-patches/pending/*
+          do
+            patch -p1 < $f
+          done
+
+      - if: ${{ matrix.hostapd }}
+        name: Setup hostapd config file 
+        run: |
+          cp wolfssl/.github/workflows/hostap-files/configs/${{ matrix.config.hostap_ref }}/hostapd.config \
+             hostap/hostapd/.config
+          cat <<EOF >> hostap/hostapd/.config
+            CFLAGS += -I$GITHUB_WORKSPACE/build-dir/include -Wl,-rpath=$GITHUB_WORKSPACE/build-dir/lib
+            LIBS += -L$GITHUB_WORKSPACE/build-dir/lib -Wl,-rpath=$GITHUB_WORKSPACE/build-dir/lib
+          EOF
+
+      - if: ${{ matrix.wpa_supplicant }}
+        name: Setup wpa_supplicant config file 
+        run: |
+          cp wolfssl/.github/workflows/hostap-files/configs/${{ matrix.config.hostap_ref }}/wpa_supplicant.config \
+             hostap/wpa_supplicant/.config
+          cat <<EOF >> hostap/wpa_supplicant/.config
+            CFLAGS += -I$GITHUB_WORKSPACE/build-dir/include -Wl,-rpath=$GITHUB_WORKSPACE/build-dir/lib
+            LIBS += -L$GITHUB_WORKSPACE/build-dir/lib -Wl,-rpath=$GITHUB_WORKSPACE/build-dir/lib
+          EOF
+
+      - name: Build hostap
+        working-directory: hostap/tests/hwsim/
+        run: ./build.sh
+
+      - if: ${{ matrix.hostapd }}
+        name: Confirm hostapd linking with wolfSSL
+        run: ldd hostap/hostapd/hostapd | grep wolfssl
+
+      - if: ${{ matrix.wpa_supplicant }}
+        name: Confirm wpa_supplicant linking with wolfSSL
+        run: ldd hostap/wpa_supplicant/wpa_supplicant | grep wolfssl
+
+      - if: ${{ matrix.config.remove_teap }}
+        name: Remove EAP-TEAP from test configuration
+        working-directory: hostap/tests/hwsim/auth_serv
+        run: |
+          sed -e 's/"erp-teap@example.com"\tTEAP//' -i eap_user.conf
+          sed -e 's/"erp-teap@example.com"\tMSCHAPV2\t"password"\t\[2\]//' -i eap_user.conf
+          sed -e 's/"TEAP"\t\tTEAP//' -i eap_user.conf
+          sed -e 's/TEAP,//' -i eap_user.conf
+
+      - name: Run tests
+        id: testing
+        working-directory: hostap/tests/hwsim/
+        run: |
+          # Run tests in increments of 50 to cut down on the uploaded log size.
+          while mapfile -t -n 50 ary && ((${#ary[@]})); do
+            TESTS=$(printf '%s\n' "${ary[@]}" | tr '\n' ' ')
+            # Retry up to three times
+            for i in {1..3}; do
+              HWSIM_RES=0
+              # Logs can grow quickly especially in debug mode
+              sudo rm -rf logs
+              sudo ./start.sh
+              sudo ./run-tests.py ${{ env.hostap_debug_flags }} --split ${{ matrix.server }}/5 $TESTS || HWSIM_RES=$?
+              sudo ./stop.sh
+              if [ "$HWSIM_RES" -eq "0" ]; then
+                break
+              fi
+            done
+            echo "test ran $i times"
+            if [ "$HWSIM_RES" -ne "0" ]; then
+              exit $HWSIM_RES
+            fi
+          done < $GITHUB_WORKSPACE/wolfssl/.github/workflows/hostap-files/configs/${{ matrix.config.hostap_ref }}/tests
+
+      - name: Change failure log permissions
+        if: ${{ failure() && steps.testing.outcome == 'failure' }}
+        working-directory: hostap/tests/hwsim/
+        run: |
+          sudo chown -R $USER:$USER logs
+          zip -9 -r logs.zip logs/current
+
+      - name: Upload failure logs
+        if: ${{ failure() && steps.testing.outcome == 'failure' }}
+        uses: actions/upload-artifact@v3
+        with:
+          name: hostap-logs-${{ env.our_job_run_id }}
+          path: hostap/tests/hwsim/logs.zip
+          retention-days: 5
+

.github/workflows/macos-check.yml

@@ -1,28 +0,0 @@
-name: macOS Build Test
-
-on:
-  push:
-    branches: [ '*' ]
-  pull_request:
-    branches: [ '*' ]
-
-jobs:
-  build:
-
-    runs-on: macos-latest
-
-    steps:
-    - uses: actions/checkout@v2
-    - name: brew
-      run: brew install automake libtool
-    - name: autogen
-      run: ./autogen.sh
-    - name: configure
-      run: ./configure
-    - name: make
-      run: make
-    - name: make check
-      run: make check
-    - name: make distcheck
-      run: make distcheck
-

.github/workflows/main.yml

@@ -0,0 +1,31 @@
+name: CI
+concurrency:
+  group: ${{ github.ref }}
+  cancel-in-progress: true
+
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+jobs:
+    espressif:
+        uses: ./.github/workflows/docker-Espressif.yml
+    multi-compiler:
+        uses: ./.github/workflows/multi-compiler.yml
+    openwrt:
+        uses: ./.github/workflows/docker-OpenWrt.yml
+    os-check:
+        uses: ./.github/workflows/os-check.yml
+    async:
+        uses: ./.github/workflows/async.yml
+    stunnel:
+        uses: ./.github/workflows/stunnel.yml
+    openvpn:
+        uses: ./.github/workflows/openvpn.yml
+    hostap:
+        uses: ./.github/workflows/hostap.yml
+# TODO: Currently this test fails. Enable it once it becomes passing.        
+#    haproxy:
+#        uses: ./.github/workflows/haproxy.yml

.github/workflows/multi-compiler.yml

@@ -0,0 +1,34 @@
+name: Multiple compilers and versions
+
+on:
+  workflow_call:
+
+jobs:
+  my_matrix:
+    name: Compiler test
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - CC: gcc-9
+            CXX: g++-9
+          - CC: gcc-10
+            CXX: g++-10
+          - CC: gcc-11
+            CXX: g++-11
+          - CC: gcc-12
+            CXX: g++-12
+          - CC: clang-12
+            CXX: clang++-12
+          - CC: clang-13
+            CXX: clang++-13
+          - CC: clang-14
+            CXX: clang++-14
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+      - name: Build
+        env:
+            CC: ${{ matrix.CC }}
+            CXX: ${{ matrix.CXX }}
+        run: ./autogen.sh && ./configure && make && make dist

.github/workflows/openvpn.yml

@@ -0,0 +1,69 @@
+name: OpenVPN Tests
+
+on:
+  workflow_call:
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-latest
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-openvpn
+          install: true
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v3
+        with:
+          name: wolf-install-openvpn
+          path: build-dir
+          retention-days: 1
+
+  openvpn_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        # List of refs to test
+        ref: [ master, release/2.6, v2.6.0 ]
+    name: ${{ matrix.ref }}
+    runs-on: ubuntu-latest
+    needs: build_wolfssl
+    steps:
+      - name: Download lib
+        uses: actions/download-artifact@v3
+        with:
+          name: wolf-install-openvpn
+          path: build-dir
+
+      - name: Install dependencies
+        run: |
+          sudo apt-get update
+          sudo apt-get install liblzo2-dev libpam0g-dev liblz4-dev libcap-ng-dev \
+                     linux-libc-dev man2html libcmocka-dev python3-docutils \
+                     libtool automake autoconf libnl-genl-3-dev libnl-genl-3-200
+
+      - if: ${{ matrix.ref != 'master' }}
+        name: Build and test openvpn with fsanitize
+        run: |
+          echo 'extra_c_flags=CFLAGS="-fsanitize=address -fno-omit-frame-pointer -O2"' >> $GITHUB_ENV
+
+      - name: Build and test openvpn
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          repository: OpenVPN/openvpn
+          ref: ${{ matrix.ref }}
+          path: openvpn
+          configure: >-
+            --with-crypto-library=wolfssl
+            WOLFSSL_CFLAGS="-I$GITHUB_WORKSPACE/build-dir/include/ -I$GITHUB_WORKSPACE/build-dir/include/wolfssl"
+            WOLFSSL_LIBS="-L$GITHUB_WORKSPACE/build-dir/lib -lwolfssl"
+            ${{ env.extra_c_flags }}
+          check: true
+
+      - name: Confirm OpenVPN built with wolfSSL
+        working-directory: ./openvpn
+        run: ldd src/openvpn/openvpn | grep wolfssl

.github/workflows/os-check.yml

@@ -0,0 +1,122 @@
+name: Ubuntu-Macos-Windows Tests
+
+on:
+  workflow_call:
+
+jobs:
+  make_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        os: [ ubuntu-latest, macos-latest ]
+        config: [
+          # Add new configs here
+          '',
+          '--enable-all --enable-asn=template',
+          '--enable-all --enable-asn=original',
+          '--enable-harden-tls',
+          '--enable-tls13 --enable-session-ticket --enable-dtls --enable-dtls13
+           --enable-opensslextra --enable-sessioncerts 
+           CPPFLAGS=''-DWOLFSSL_DTLS_NO_HVR_ON_RESUME -DHAVE_EXT_CACHE 
+           -DWOLFSSL_TICKET_HAVE_ID -DHAVE_EX_DATA -DSESSION_CACHE_DYNAMIC_MEM'' ',
+        ]
+    name: make check
+    runs-on: ${{ matrix.os }}
+    steps:
+      - name: Build and test wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          configure: ${{ matrix.config }}
+          check: true
+
+  make_user_settings:
+    strategy:
+      fail-fast: false
+      matrix:
+        os: [ ubuntu-latest, macos-latest ]
+        user-settings: [
+          # Add new user_settings.h here
+          'examples/configs/user_settings_all.h',
+        ]
+    name: make user_setting.h
+    runs-on: ${{ matrix.os }}
+    steps:
+      - name: Build and test wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          configure: --enable-usersettings
+          check: true
+          user-settings: ${{ matrix.user-settings }}
+
+  make_user_settings_testwolfcrypt:
+    strategy:
+      fail-fast: false
+      matrix:
+        os: [ ubuntu-latest, macos-latest ]
+        user-settings: [
+          # Add new user_settings.h here
+          'examples/configs/user_settings_min_ecc.h',
+          'examples/configs/user_settings_wolfboot_keytools.h',
+          'examples/configs/user_settings_wolftpm.h',
+        ]
+    name: make user_setting.h (testwolfcrypt only)
+    runs-on: ${{ matrix.os }}
+    steps:
+      - name: Build and test wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          configure: --enable-usersettings --disable-examples
+          check: false
+          user-settings: ${{ matrix.user-settings }}
+
+      - name: Run wolfcrypt/test/testwolfcrypt
+        run: ./wolfcrypt/test/testwolfcrypt
+
+  # Has to be dedicated function due to the sed call
+  make_user_all:
+    strategy:
+      fail-fast: false
+      matrix:
+        os: [ ubuntu-latest, macos-latest ]
+    name: make user_setting.h (with sed)
+    runs-on: ${{ matrix.os }}
+    steps:
+    - uses: actions/checkout@v3
+    - if: ${{ matrix.os == 'macos-latest' }}
+      run: brew install automake libtool
+    - run: ./autogen.sh
+    - name: user_settings_all.h with compatibility layer
+      run: |
+        cp ./examples/configs/user_settings_all.h user_settings.h
+        sed -i -e "s/if 0/if 1/" user_settings.h
+        ./configure --enable-usersettings
+        make
+        make check
+
+  windows_build:
+    name: Windows Build Test
+    runs-on: windows-latest
+    env:
+      # Path to the solution file relative to the root of the project.
+      SOLUTION_FILE_PATH: wolfssl64.sln
+
+      # Configuration type to build.
+      # You can convert this to a build matrix if you need coverage of multiple configuration types.
+      # https://docs.github.com/actions/learn-github-actions/managing-complex-workflows#using-a-build-matrix
+      BUILD_CONFIGURATION: Release
+      BUILD_PLATFORM: x64
+    steps:
+    - uses: actions/checkout@v3
+
+    - name: Add MSBuild to PATH
+      uses: microsoft/setup-msbuild@v1
+
+    - name: Restore NuGet packages
+      working-directory: ${{env.GITHUB_WORKSPACE}}
+      run: nuget restore ${{env.SOLUTION_FILE_PATH}}
+
+    - name: Build
+      working-directory: ${{env.GITHUB_WORKSPACE}}
+      # Add additional options to the MSBuild command line here (like platform or verbosity level).
+      # See https://docs.microsoft.com/visualstudio/msbuild/msbuild-command-line-reference
+      run: msbuild /m /p:PlatformToolset=v142 /p:Platform=${{env.BUILD_PLATFORM}} /p:Configuration=${{env.BUILD_CONFIGURATION}} ${{env.SOLUTION_FILE_PATH}}

.github/workflows/stunnel.yml

@@ -0,0 +1,61 @@
+name: stunnel Tests
+
+on:
+  workflow_call:
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-latest
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-stunnel
+          install: true
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v3
+        with:
+          name: wolf-install-stunnel
+          path: build-dir
+          retention-days: 1
+
+  stunnel_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        # List of releases to test
+        ref: [ 5.67 ]
+    name: ${{ matrix.ref }}
+    runs-on: ubuntu-latest
+    needs: build_wolfssl
+    steps:
+      - name: Download lib
+        uses: actions/download-artifact@v3
+        with:
+          name: wolf-install-stunnel
+          path: build-dir
+    
+      - name: Checkout OSP
+        uses: actions/checkout@v3
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Build and test stunnel
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          repository: mtrojnar/stunnel
+          ref: stunnel-${{ matrix.ref }}
+          path: stunnel
+          patch-file: $GITHUB_WORKSPACE/osp/stunnel/${{ matrix.ref }}/stunnel-${{ matrix.ref }}.patch
+          configure: --enable-wolfssl SSLDIR=$GITHUB_WORKSPACE/build-dir
+          check: true
+
+      - name: Confirm stunnel built with wolfSSL
+        working-directory: ./stunnel
+        run: ldd src/stunnel | grep wolfssl
+

.github/workflows/ubuntu-check.yml

@@ -1,26 +0,0 @@
-name: Ubuntu Build Test
-
-on:
-  push:
-    branches: [ '*' ]
-  pull_request:
-    branches: [ '*' ]
-
-jobs:
-  build:
-
-    runs-on: ubuntu-latest
-
-    steps:
-    - uses: actions/checkout@v2
-    - name: autogen
-      run: ./autogen.sh
-    - name: configure
-      run: ./configure
-    - name: make
-      run: make
-    - name: make check
-      run: make check
-    - name: make distcheck
-      run: make distcheck
-

.github/workflows/windows-check.yml

@@ -1,38 +0,0 @@
-name: Windows Build Test
-
-on:
-  push:
-    branches: [ '*' ]
-  pull_request:
-    branches: [ '*' ]
-
-env:
-  # Path to the solution file relative to the root of the project.
-  SOLUTION_FILE_PATH: wolfssl64.sln
-
-  # Configuration type to build.
-  # You can convert this to a build matrix if you need coverage of multiple configuration types.
-  # https://docs.github.com/actions/learn-github-actions/managing-complex-workflows#using-a-build-matrix
-  BUILD_CONFIGURATION: Release
-  BUILD_PLATFORM: x64
-
-jobs:
-  build:
-    runs-on: windows-latest
-
-    steps:
-    - uses: actions/checkout@v2
-
-    - name: Add MSBuild to PATH
-      uses: microsoft/setup-msbuild@v1
-
-    - name: Restore NuGet packages
-      working-directory: ${{env.GITHUB_WORKSPACE}}
-      run: nuget restore ${{env.SOLUTION_FILE_PATH}}
-
-    - name: Build
-      working-directory: ${{env.GITHUB_WORKSPACE}}
-      # Add additional options to the MSBuild command line here (like platform or verbosity level).
-      # See https://docs.microsoft.com/visualstudio/msbuild/msbuild-command-line-reference
-      run: msbuild /m /p:PlatformToolset=v142 /p:Platform=${{env.BUILD_PLATFORM}} /p:Configuration=${{env.BUILD_CONFIGURATION}} ${{env.SOLUTION_FILE_PATH}}
-

.gitignore

@@ -10,7 +10,7 @@ ctaocrypt/src/src/
 *.cache
 .dirstamp
 *.user
-configure
+configure
 config.*
 !cmake/config.in
 *Debug/
@@ -73,6 +73,7 @@ examples/sctp/sctp-server
 examples/sctp/sctp-server-dtls
 examples/sctp/sctp-client
 examples/sctp/sctp-client-dtls
+examples/asn1/asn1
 server_ready
 snifftest
 output
@@ -208,14 +209,6 @@ TAGS
 support/cyassl.pc
 support/wolfssl.pc
 cyassl/ctaocrypt/stamp-h1
-swig/_cyassl.so
-swig/_wolfssl.so
-swig/cyassl.py
-swig/wolfssl.py
-swig/cyassl.pyc
-swig/wolfssl.pyc
-swig/cyassl_wrap.c
-swig/wolfssl_wrap.c
 stamp-h1
 clang_output_*
 internal.plist
@@ -235,6 +228,7 @@ IDE/MDK-ARM/LPC43xx/LPC43xx/
 !linuxkm/Makefile
 /Kbuild
 linuxkm/*.ko
+linuxkm/*.ko.signed
 linuxkm/Module.symvers
 linuxkm/built-in.a
 linuxkm/modules.order
@@ -362,12 +356,33 @@ IDE/XCODE/Index
 /IDE/Renesas/e2studio/Projects/test/*.launch
 /IDE/Renesas/e2studio/Projects/test/*.scfg
 
+/IDE/Renesas/e2studio/RX65N/GR-ROSE/.metadata
+/IDE/Renesas/e2studio/RX65N/GR-ROSE/smc/src
+/IDE/Renesas/e2studio/RX65N/GR-ROSE/smc/trash
+/IDE/Renesas/e2studio/RX65N/GR-ROSE/test/src/smc_gen
+/IDE/Renesas/e2studio/RX65N/GR-ROSE/test/generate
+
+/IDE/Renesas/e2studio/RX65N/RSK/.metadata
+/IDE/Renesas/e2studio/RX65N/RSK/smc/src
+/IDE/Renesas/e2studio/RX65N/RSK/smc/trash
+/IDE/Renesas/e2studio/RX65N/RSK/test/src/smc_gen
+/IDE/Renesas/e2studio/RX65N/RSK/test/generate
+
+/IDE/Renesas/e2studio/RX72N/EnvisionKit/.metadata
+/IDE/Renesas/e2studio/RX72N/EnvisionKit/smc/src
+/IDE/Renesas/e2studio/RX72N/EnvisionKit/smc/trash
+/IDE/Renesas/e2studio/RX72N/EnvisionKit/test/src/smc_gen
+/IDE/Renesas/e2studio/RX72N/EnvisionKit/test/generate
+
 # QNX CAAM
 /IDE/QNX/example-server/server-tls
 /IDE/QNX/example-client/client-tls
 /IDE/QNX/example-cmac/cmac-test
 /IDE/QNX/CAAM-DRIVER/wolfCrypt
 
+# Xilinx
+/IDE/XilinxSDK/data
+
 # Emacs
 *~
 
@@ -379,3 +394,26 @@ cmake_install.cmake
 # GDB Settings
 \.gdbinit
 
+libFuzzer
+
+# Pycharm and other IDEs
+\.idea
+
+# FIPS
+XXX-fips-test
+
+# ASYNC
+async
+
+# Generated user_settings_asm.h.
+user_settings_asm.h
+
+# VisualGD
+**/.visualgdb
+
+# Espressif sdk config default should be saved in sdkconfig.defaults
+# we won't track the actual working sdkconfig files
+/IDE/Espressif/**/sdkconfig
+
+# auto-created CMake backups
+**/CMakeLists.txt.old

Docker/Dockerfile

@@ -0,0 +1,25 @@
+ARG DOCKER_BASE_IMAGE=ubuntu:22.04
+FROM $DOCKER_BASE_IMAGE
+
+USER root
+
+ARG DEPS_WOLFSSL="build-essential autoconf libtool clang clang-tools zlib1g-dev libuv1-dev libpam0g-dev valgrind git linux-headers-generic gcc-multilib g++-multilib libpcap-dev bubblewrap gdb iputils-ping lldb bsdmainutils netcat binutils-arm-linux-gnueabi binutils-aarch64-linux-gnu"
+ARG DEPS_LIBOQS="astyle cmake gcc ninja-build libssl-dev python3-pytest python3-pytest-xdist unzip xsltproc doxygen graphviz python3-yaml valgrind git"
+ARG DEPS_TESTS="abi-dumper libcurl4-openssl-dev tcpdump"
+RUN DEBIAN_FRONTEND=noninteractive apt update && apt install -y apt-utils \
+                    && apt install -y ${DEPS_WOLFSSL} ${DEPS_LIBOQS} ${DEPS_TESTS} \
+                    && apt clean -y && rm -rf /var/lib/apt/lists/*
+
+ARG USER=docker
+ARG UID=1000
+ARG GID=1000
+RUN groupadd -f -g ${GID} docker && ( getent passwd ${UID} || useradd -ms /bin/bash ${USER} -u ${UID} -g ${GID} )
+
+# install liboqs
+RUN git clone --single-branch https://github.com/open-quantum-safe/liboqs.git && cd liboqs && git checkout af76ca3b1f2fbc1f4f0967595f3bb07692fb3d82 \
+    && mkdir build && cd build && cmake -DOQS_DIST_BUILD=ON -DOQS_USE_CPUFEATURE_INSTRUCTIONS=OFF -DOQS_USE_OPENSSL=0 .. && make -j8 all && make install && cd ../.. && rm -rf liboqs
+
+# Allow non-root to use tcpdump (will need NET_RAW and NET_ADMIN capability when running the container)
+RUN setcap 'CAP_NET_RAW+eip CAP_NET_ADMIN+eip' /usr/bin/tcpdump
+
+USER ${UID}:${GID}

Docker/OpenWrt/Dockerfile

@@ -0,0 +1,12 @@
+# This Dockerfile is used in conjunction with the docker-OpenWrt.yml GitHub Action.
+ARG DOCKER_BASE_CONTAINER=openwrt/rootfs:x86-64-snapshot
+FROM $DOCKER_BASE_CONTAINER
+
+RUN mkdir -p /var/lock # Fix for parent container
+COPY libwolfssl.so /tmp/libwolfssl.so
+RUN export LIBWOLFSSL=$(ls /usr/lib/libwolfssl.so.* -1); \
+                      rm ${LIBWOLFSSL} && ln -s /tmp/libwolfssl.so ${LIBWOLFSSL}
+# for debugging purposes to make sure the correct library is tested
+RUN ls -Ll /usr/lib/libwolfssl* && ldd /lib/libustream-ssl.so | grep wolfssl
+COPY runTests.sh /tmp/.
+RUN /tmp/runTests.sh

Docker/OpenWrt/README.md

@@ -0,0 +1,13 @@
+This container is really only useful in conjunction with the GitHub Workflow
+found in .github/workflows/docker-OpenWrt.yml. The idea is that we will
+compile a new libwolfssl that gets placed in official OpenWrt containers to
+run some tests ensuring the library is still compatible with existing
+binaries.
+
+To run the test locally, build libwolfssl.so (or download from the GitHub Action)
+and put it in Docker/OpenWrt. Then switch to that folder and run:
+docker build -t openwrt --build-args DOCKER_BASE_CONTAINER=<openwrtContainer> .
+where 'openwrtContainer' => "openwrt/rootfs:x86-64-22.03-SNAPSHOT" or similar
+
+This should run some sample tests. The resulting container then can be used to
+evaluate OpenWrt with the latest wolfSSL library.

Docker/OpenWrt/runTests.sh

@@ -0,0 +1,23 @@
+#!/bin/sh
+
+runCMD() { # usage: runCMD "<command>" "<retVal>"
+    eval $1 >/dev/null 2>&1
+    RETVAL=$?
+    if [ "$RETVAL" != "$2" ]; then
+        echo "Command ($1) returned ${RETVAL}, but expected $2. Rerunning with output to terminal:"
+        eval $1
+        exit 1
+    fi
+}
+
+# Successful tests
+runCMD "ldd /lib/libustream-ssl.so" 0
+runCMD "opkg update" 0
+runCMD "uclient-fetch -O /dev/null 'https://letsencrypt.org'" 0
+# Negative tests
+runCMD "uclient-fetch --ca-certificate=/dev/null -O /dev/null 'https://letsencrypt.org'" 5
+runCMD "uclient-fetch -O /dev/null 'https://self-signed.badssl.com/'" 5
+runCMD "uclient-fetch -O /dev/null 'https://untrusted-root.badssl.com/'" 5
+runCMD "uclient-fetch -O /dev/null 'https://expired.badssl.com/'" 5
+
+echo "All tests passed."

Docker/README.md

@@ -0,0 +1,13 @@
+# Overview
+This is a simple Docker environment for compiling and running WolfSSL. Use `run.sh` to build everything (Docker container, WolfSSL, etc.). This script takes in arguments that can be passed to `./configure`. For example: `run.sh --enable-all`
+
+When the compilation and tests succeed, you will be dropped in to a shell environment within the container. This can be useful to build other things within the environment.
+
+# FAQ
+## permission denied while trying to connect to the Docker daemon socket at unix:///var/run/docker.sock
+You need to be added to the `docker` group to run Docker containers. Run `sudo usermod -aG docker $USER`. You may need to restart the Docker daemon.
+
+## Unable to access symlinked files outside of WolfSSL
+The volume mounted in the Docker container needs to have all files that your compilation will need. To solve this, you have a couple options:
+1. Change the `WOLFSSL_DIR` variable in the `run.sh` to one higher up (by adding `/..` to the path). Then update the `docker build` to include the correct path to the Dockerfile and the `docker run` argument to the working directory (`-w`) to the WolfSSL source directory
+2. Move the external repository to within the WolfSSL directory. For example create an `external` folder which has your files. This route may have complications when stashing Git work.

Docker/include.am

@@ -0,0 +1,11 @@
+# vim:ft=automake
+# included from Top Level Makefile.am
+# All paths should be given relative to the root
+
+EXTRA_DIST+= Docker/Dockerfile
+EXTRA_DIST+= Docker/run.sh
+EXTRA_DIST+= Docker/README.md
+
+ignore_files+=Docker/OpenWRT/Dockerfile
+ignore_files+=Docker/OpenWRT/runTests.sh
+ignore_files+=Docker/OpenWRT/README.md

Docker/run.sh

@@ -0,0 +1,14 @@
+#!/bin/bash
+
+echo "Running with \"${*}\"..."
+
+# Assume we're in wolfssl/Docker
+WOLFSSL_DIR=$(builtin cd ${BASH_SOURCE%/*}/..; pwd)
+
+docker build -t wolfssl --build-arg UID=$(id -u) --build-arg GID=$(id -g) "${WOLFSSL_DIR}/Docker" && \
+  docker run --rm -it -v ${HOME}/.gitconfig:/home/docker/.gitconfig:ro -v ${HOME}/.ssh:/home/docker/.ssh:ro -v "${WOLFSSL_DIR}:/tmp/wolfssl" -w /tmp/wolfssl wolfssl /bin/bash -c "./autogen.sh && ./configure ${*@Q} && make" && \
+  docker run --rm -it -v ${HOME}/.gitconfig:/home/docker/.gitconfig:ro -v ${HOME}/.ssh:/home/docker/.ssh:ro -v "${WOLFSSL_DIR}:/tmp/wolfssl" -w /tmp/wolfssl wolfssl /bin/bash
+
+exitval=$?
+echo "Exited with error code $exitval"
+exit $exitval

Docker/wolfCLU/Dockerfile

@@ -0,0 +1,26 @@
+ARG DOCKER_BASE_IMAGE=ubuntu
+FROM ubuntu as BUILDER
+
+ARG DEPS_WOLFSSL="build-essential autoconf libtool zlib1g-dev libuv1-dev libpam0g-dev git libpcap-dev libcurl4-openssl-dev bsdmainutils netcat iputils-ping bubblewrap"
+RUN DEBIAN_FRONTEND=noninteractive apt update && apt install -y apt-utils \
+                    && apt install -y ${DEPS_WOLFSSL} ${DEPS_LIBOQS} \
+                    && apt clean -y && rm -rf /var/lib/apt/lists/*
+
+ARG NUM_CPU=16
+
+# This arg is to force a rebuild starting from this line
+ARG DUMMY=date
+# install wolfssl
+RUN DUMMY=${DUMMY} git clone --depth=1 --single-branch --branch=master http://github.com/wolfssl/wolfssl && cd wolfssl && ./autogen.sh && ./configure --enable-all && make -j $NUM_CPU && make install && ldconfig
+
+# install wolfCLU
+RUN git clone --depth=1 --single-branch --branch=main http://github.com/wolfssl/wolfCLU && cd wolfCLU && ./autogen.sh && ./configure && make -j $NUM_CPU && make install
+
+FROM ${DOCKER_BASE_IMAGE}
+USER root
+COPY --from=BUILDER /usr/local/lib/libwolfssl.so /usr/local/lib/
+COPY --from=BUILDER /usr/local/bin/wolfssl* /usr/local/bin/
+RUN ldconfig
+CMD ["/usr/local/bin/wolfssl"]
+LABEL org.opencontainers.image.source=https://github.com/wolfssl/wolfssl
+LABEL org.opencontainers.image.description="Simple wolfCLU in a container"

Docker/wolfCLU/README.md

@@ -0,0 +1,10 @@
+This is a small container that has wolfCLU installed for quick access. To build your own run the following:
+```
+docker build --pull --build-arg DUMMY=$(date +%s) -t wolfclu . 
+```
+
+To run the container, you can use:
+```
+docker run -it --rm -v $(pwd):/ws -w /ws wolfclu version
+```
+This command will allow you to use the certs/keys in your local directory.

IDE/ARDUINO/sketches/wolfssl_client/wolfssl_client.ino

@@ -1,6 +1,6 @@
 /* wolfssl_client.ino
  *
- * Copyright (C) 2006-2021 wolfSSL Inc.
+ * Copyright (C) 2006-2023 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/ARDUINO/sketches/wolfssl_server/wolfssl_server.ino

@@ -1,6 +1,6 @@
 /* wolfssl_server.ino
  *
- * Copyright (C) 2006-2021 wolfSSL Inc.
+ * Copyright (C) 2006-2023 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/AURIX/Cpu0_Main.c

@@ -0,0 +1,153 @@
+/* Cpu0_Main.c
+ *
+ * Copyright (C) 2006-2023 wolfSSL Inc.
+ *
+ * This file is part of wolfSSL.
+ *
+ * wolfSSL is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * wolfSSL is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
+ */
+
+/* Infineon includes */
+#include "Ifx_Types.h"
+#include "IfxCpu.h"
+#include "IfxScuWdt.h"
+#include "IfxAsclin_Asc.h"
+#include "IfxCpu_Irq.h"
+#include "IfxPort.h"
+#include "SysSe/Bsp/Bsp.h"
+
+/* For mapping stdio printf */
+#include <stdio.h>
+#include <string.h>
+
+/* used to wait for CPU sync event */
+IFX_ALIGN(4) IfxCpu_syncEvent g_cpuSyncEvent = 0;
+
+#define SERIAL_BAUDRATE         115200  /* Baud rate in bit/s */
+#define SERIAL_PIN_RX           IfxAsclin0_RXA_P14_1_IN /* RX pin of the board */
+#define SERIAL_PIN_TX           IfxAsclin0_TX_P14_0_OUT /* TX pin of the board */
+#define INTPRIO_ASCLIN0_TX      19  /* Priority of the ISR */
+#define ASC_TX_BUFFER_SIZE      128 /* Definition of the buffer size */
+
+/* Declaration of the ASC handle */
+static IfxAsclin_Asc g_asc;
+
+/* Declaration of the FIFOs parameters:
+ * The transfer buffers allocate memory for the data itself and for FIFO runtime
+ * variables. 8 more bytes have to be added to ensure a proper circular buffer
+ * handling independent from the address to which the buffers have been located.
+ */
+static uint8 g_ascTxBuffer[ASC_TX_BUFFER_SIZE + sizeof(Ifx_Fifo) + 8];
+
+/******************************************************************************/
+/*----Function Implementations------------------------------------------------*/
+/******************************************************************************/
+
+/* Re-target the C library printf function to the asc lin. */
+int fputc(int ch, FILE *f)
+{
+    Ifx_SizeT count;
+    /* convert to CRLF */
+    if (ch == (int)'\n') {
+        int chcr = (int)'\r';
+        count = 1;
+        IfxAsclin_Asc_write(&g_asc, &chcr, &count, TIME_INFINITE);    
+    }
+    count = 1;
+    IfxAsclin_Asc_write(&g_asc, &ch, &count, TIME_INFINITE);
+    return ch;
+}
+
+/* Add the Interrupt Service Routine */
+IFX_INTERRUPT(asclin0_Tx_ISR, 0, INTPRIO_ASCLIN0_TX);
+void asclin0_Tx_ISR(void)
+{
+    IfxAsclin_Asc_isrTransmit(&g_asc);
+}
+
+static void init_UART(void)
+{
+    IfxAsclin_Asc_Config ascConfig;
+
+    IfxCpu_Irq_installInterruptHandler(asclin0_Tx_ISR, INTPRIO_ASCLIN0_TX);
+
+    /* Port pins configuration */
+    const IfxAsclin_Asc_Pins pins = {
+        NULL_PTR,         IfxPort_InputMode_pullUp,     /* CTS pin not used   */
+        &SERIAL_PIN_RX,   IfxPort_InputMode_pullUp,     /* RX pin             */
+        NULL_PTR,         IfxPort_OutputMode_pushPull,  /* RTS pin not used   */
+        &SERIAL_PIN_TX,   IfxPort_OutputMode_pushPull,  /* TX pin             */
+        IfxPort_PadDriver_cmosAutomotiveSpeed1
+    };
+
+    /* Initialize an instance of IfxAsclin_Asc_Config with default values */
+    IfxAsclin_Asc_initModuleConfig(&ascConfig, SERIAL_PIN_TX.module);
+
+    /* Set the desired baud rate */
+    ascConfig.baudrate.baudrate = SERIAL_BAUDRATE;
+
+    /* ISR priorities and interrupt target */
+    ascConfig.interrupt.txPriority = INTPRIO_ASCLIN0_TX;
+    ascConfig.interrupt.typeOfService = IfxCpu_Irq_getTos(IfxCpu_getCoreIndex());
+
+    /* FIFO configuration */
+    ascConfig.txBuffer = &g_ascTxBuffer;
+    ascConfig.txBufferSize = ASC_TX_BUFFER_SIZE;
+
+    ascConfig.pins = &pins;
+
+    /* Initialize module with above parameters  */
+    IfxAsclin_Asc_initModule(&g_asc, &ascConfig);
+
+    /* Turn off buffers, so I/O occurs immediately */
+    setvbuf(stdin, NULL, _IONBF, 0);
+    setvbuf(stdout, NULL, _IONBF, 0);
+    setvbuf(stderr, NULL, _IONBF, 0);
+}
+
+int send_UART(const char* str)
+{
+    Ifx_SizeT count = (Ifx_SizeT)strlen(str);
+    IfxAsclin_Asc_write(&g_asc, str, &count, TIME_INFINITE);
+    return (int)count;
+}
+
+void core0_main(void)
+{
+    IfxCpu_enableInterrupts();
+
+    /* !!WATCHDOG0 AND SAFETY WATCHDOG ARE DISABLED HERE!!
+     * Enable the watchdogs and service them periodically if it is required
+     */
+    IfxScuWdt_disableCpuWatchdog(IfxScuWdt_getCpuWatchdogPassword());
+    IfxScuWdt_disableSafetyWatchdog(IfxScuWdt_getSafetyWatchdogPassword());
+
+    /* Wait for CPU sync event */
+    IfxCpu_emitEvent(&g_cpuSyncEvent);
+    IfxCpu_waitEvent(&g_cpuSyncEvent, 1);
+
+    /* Initialize the UART to board VCOM */
+    init_UART();
+
+    /* bare metal loop */
+    while(1)
+    {
+        extern void run_wolf_tests(void);
+        run_wolf_tests();
+
+        /* wait 5 seconds */
+        waitTime(IfxStm_getTicksFromMilliseconds(BSP_DEFAULT_TIMER, 5 * 1000));
+    } /* while */
+}

IDE/AURIX/README.md

@@ -0,0 +1,114 @@
+# Infineon AURIX Development Studio
+
+An Eclipse based IDE for developing software for the Infineon TriCore AURIX TX3XX.
+
+Tested Platform:
+* Infineon AURIX™ Development Studio 1.7.2 (Build 20220617-0730)
+* Infineon TriBoard TC399 v2.0
+* wolfSSL v5.4.0 (with PR 5419)
+
+## Running wolfCrypt on TriCore
+
+1) Add the wolfSSL source and headers to `Libraries/wolfssl`. 
+  - Only the following folders are required: `src`, `wolfcrypt` and `wolfssl`.
+  - See script to help with producing bundle here: https://github.com/wolfSSL/wolfssl/blob/master/scripts/makedistsmall.sh
+2) Add `WOLFSSL_USER_SETTINGS` to the Preprocessing symbols list. C/C++ Build -> Settings -> TASKING C/C++ Compiler -> Preprocessing.
+3) Add `Libraries/wolfssl` to the include path. C/C++ General -> Paths and Symbols -> Includes -> GNU C
+4) Add ignores for the following warnings. Unused static function (553) and switch missing break (536). C/C++ Build -> Settings -> TASKING C/C++ Compiler -> Diagnostics
+5) Copy `Cpu0_Main.c`, `user_settings.h` and `wolf_main.c` into the project folder.
+6) Increase the stack by modifying `Lcf_Tasking_Tricore_Tc.lsl` to adjusting the USTACK0-4 (`LCF_USTACK#_SIZE`) from 2k to 12k.
+6) Build and run/debug.
+
+### Example output from wolfCrypt test and benchmark
+
+Benchmark Configuration:
+* TriCore (TC1.6.2P) 32-bit super-scalar running at 300MHz:
+* Release build: `-O2`
+* SP Math SMALL: sp_c32.c for RSA/ECC/DH
+* AES GCM SMALL
+
+```
+Running wolfCrypt Tests...
+------------------------------------------------------------------------------
+ wolfSSL version 5.4.0
+------------------------------------------------------------------------------
+error    test passed!
+MEMORY   test passed!
+base64   test passed!
+asn      test passed!
+RANDOM   test passed!
+SHA      test passed!
+SHA-256  test passed!
+Hash     test passed!
+HMAC-SHA test passed!
+HMAC-SHA256 test passed!
+HMAC-KDF    test passed!
+TLSv1.3 KDF test passed!
+GMAC     test passed!
+Chacha   test passed!
+POLY1305 test passed!
+ChaCha20-Poly1305 AEAD test passed!
+AES      test passed!
+AES192   test passed!
+AES256   test passed!
+AES-GCM  test passed!
+RSA      test passed!
+ECC      test passed!
+ECC buffer test passed!
+CMAC     test passed!
+logging  test passed!
+time test passed!
+mutex    test passed!
+memcb    test passed!
+Test complete
+Crypt Test: Return code 0
+Running wolfCrypt Benchmarks...
+wolfCrypt Benchmark (block bytes 1024, min 1.0 sec each)
+RNG                725 KB took 1.023 seconds,  708.703 KB/s
+AES-128-CBC-enc      2 MB took 1.002 seconds,    2.071 MB/s
+AES-128-CBC-dec      2 MB took 1.005 seconds,    2.065 MB/s
+AES-192-CBC-enc      2 MB took 1.002 seconds,    1.779 MB/s
+AES-192-CBC-dec      2 MB took 1.013 seconds,    1.783 MB/s
+AES-256-CBC-enc      2 MB took 1.003 seconds,    1.558 MB/s
+AES-256-CBC-dec      2 MB took 1.009 seconds,    1.573 MB/s
+AES-128-GCM-enc    225 KB took 1.013 seconds,  222.112 KB/s
+AES-128-GCM-dec    225 KB took 1.014 seconds,  221.892 KB/s
+AES-192-GCM-enc    225 KB took 1.046 seconds,  215.107 KB/s
+AES-192-GCM-dec    225 KB took 1.046 seconds,  215.104 KB/s
+AES-256-GCM-enc    225 KB took 1.070 seconds,  210.279 KB/s
+AES-256-GCM-dec    225 KB took 1.069 seconds,  210.477 KB/s
+GMAC Small         251 KB took 1.000 seconds,  251.000 KB/s
+AES-128-ECB-enc      2 MB took 1.000 seconds,    2.000 MB/s
+AES-128-ECB-dec      2 MB took 1.000 seconds,    2.049 MB/s
+AES-192-ECB-enc      2 MB took 1.000 seconds,    1.727 MB/s
+AES-192-ECB-dec      2 MB took 1.000 seconds,    1.772 MB/s
+AES-256-ECB-enc      2 MB took 1.000 seconds,    1.518 MB/s
+AES-256-ECB-dec      2 MB took 1.000 seconds,    1.563 MB/s
+CHACHA               3 MB took 1.007 seconds,    3.322 MB/s
+CHA-POLY             2 MB took 1.011 seconds,    2.028 MB/s
+POLY1305             6 MB took 1.003 seconds,    6.012 MB/s
+SHA                  3 MB took 1.004 seconds,    3.380 MB/s
+SHA-256              2 MB took 1.003 seconds,    1.558 MB/s
+AES-128-CMAC         2 MB took 1.010 seconds,    2.055 MB/s
+AES-256-CMAC         2 MB took 1.010 seconds,    1.547 MB/s
+HMAC-SHA             3 MB took 1.004 seconds,    3.356 MB/s
+HMAC-SHA256          2 MB took 1.010 seconds,    1.547 MB/s
+RSA     2048 public         50 ops took 1.020 sec, avg 20.400 ms, 49.019 ops/sec
+RSA     2048 private         2 ops took 2.377 sec, avg 1188.492 ms, 0.841 ops/sec
+ECC   [      SECP256R1]   256 key gen        16 ops took 1.061 sec, avg 66.313 ms, 15.080 ops/sec
+ECDHE [      SECP256R1]   256 agree          16 ops took 1.059 sec, avg 66.187 ms, 15.109 ops/sec
+ECDSA [      SECP256R1]   256 sign           14 ops took 1.058 sec, avg 75.570 ms, 13.233 ops/sec
+ECDSA [      SECP256R1]   256 verify          8 ops took 1.080 sec, avg 135.002 ms, 7.407 ops/sec
+Benchmark complete
+Benchmark Test: Return code 0
+```
+
+
+## Running wolfCrypt on the HSM (Cortex M3)
+
+Coming soon
+
+
+## Support
+
+For questions please email facts@wolfssl.com

IDE/AURIX/include.am

@@ -0,0 +1,8 @@
+# vim:ft=automake
+# included from Top Level Makefile.am
+# All paths should be given relative to the root
+
+EXTRA_DIST+= IDE/AURIX/Cpu0_Main.c
+EXTRA_DIST+= IDE/AURIX/README.md
+EXTRA_DIST+= IDE/AURIX/user_settings.h
+EXTRA_DIST+= IDE/AURIX/wolf_main.c

IDE/AURIX/user_settings.h

@@ -0,0 +1,461 @@
+/* user_settings.h
+ *
+ * Copyright (C) 2006-2023 wolfSSL Inc.
+ *
+ * This file is part of wolfSSL.
+ *
+ * wolfSSL is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * wolfSSL is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
+ */
+
+/* Template for the Infineon AURIX Development Studio and TC3XX
+ * Example wolfSSL user settings with #if 0/1 gates to enable/disable algorithms and features.
+ * This file is included with wolfssl/wolfcrypt/settings.h when WOLFSSL_USER_SETTINGS is defined.
+
+ */
+
+#ifndef WOLFSSL_USER_SETTINGS_H
+#define WOLFSSL_USER_SETTINGS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* ------------------------------------------------------------------------- */
+/* Platform */
+/* ------------------------------------------------------------------------- */
+/* Alignment and sizeof 64-bit */
+#define WOLFSSL_GENERAL_ALIGNMENT 4
+#define SIZEOF_LONG_LONG 8
+
+/* disable threading - mutex locking */
+#define SINGLE_THREADED
+
+/* ignore file include warnings */
+#define WOLFSSL_IGNORE_FILE_WARN
+
+/* disable the built-in socket support and use the IO callbacks.
+ * Set with wolfSSL_CTX_SetIORecv/wolfSSL_CTX_SetIOSend
+ */
+#define WOLFSSL_USER_IO
+
+/* Disable file system */
+#define NO_FILESYSTEM
+
+
+/* ------------------------------------------------------------------------- */
+/* Port */
+/* ------------------------------------------------------------------------- */
+
+/* Override Current Time */
+/* Allows custom "custom_time()" function to be used for benchmark */
+#define WOLFSSL_USER_CURRTIME
+#define WOLFSSL_GMTIME
+#define USER_TICKS
+extern unsigned long my_time(unsigned long* timer);
+#define XTIME my_time
+
+/* Use built-in P-RNG (SHA256 based) with HW RNG */
+#undef  HAVE_HASHDRBG
+#define HAVE_HASHDRBG
+
+/* Custom Seed Source */
+#define CUSTOM_RAND_TYPE      unsigned int
+extern unsigned int my_rng_seed_gen(void);
+#undef  CUSTOM_RAND_GENERATE
+#define CUSTOM_RAND_GENERATE  my_rng_seed_gen
+
+/* Standard Lib - C89 */
+#define XSTRCASECMP(s1,s2) strcmp((s1),(s2))
+
+
+/* ------------------------------------------------------------------------- */
+/* Math Configuration */
+/* ------------------------------------------------------------------------- */
+#undef USE_FAST_MATH
+#undef WOLFSSL_SP
+#if 1
+    /* Wolf Single Precision Math */
+    #define WOLFSSL_HAVE_SP_RSA
+    //#define WOLFSSL_HAVE_SP_DH
+    #define WOLFSSL_HAVE_SP_ECC
+    #define WOLFSSL_SP_4096 /* Enable RSA/RH 4096-bit support */
+    #define WOLFSSL_SP_384 /* Enable ECC 384-bit SECP384R1 support */
+
+    #define WOLFSSL_SP_MATH     /* only SP math - disables integer.c/tfm.c */
+    //#define WOLFSSL_SP_MATH_ALL /* use SP math for all key sizes and curves */
+
+    #define WOLFSSL_SP_NO_MALLOC
+    //#define WOLFSSL_SP_DIV_32 /* do not use 64-bit divides */
+    //#define WOLFSSL_SP_CACHE_RESISTANT
+
+    /* use smaller version of code */
+    #define WOLFSSL_SP_SMALL
+
+    /* SP Assembly Speedups - specific to chip type */
+    //#define WOLFSSL_SP_ASM
+    //#define WOLFSSL_SP_ARM32_ASM
+    //#define WOLFSSL_SP_ARM64_ASM
+    //#define WOLFSSL_SP_ARM_THUMB_ASM
+    //#define WOLFSSL_SP_ARM_CORTEX_M_ASM
+#endif
+
+#ifndef WOLFSSL_SP_MATH
+    #if 0
+        /* fast math (tfmc.) (stack based and timing resistant) */
+        #define USE_FAST_MATH
+        #define TFM_TIMING_RESISTANT
+    #else
+        /* normal heap based integer.c (not timing resistant) */
+        #define USE_INTEGER_HEAP_MATH
+    #endif
+#endif
+
+/* ------------------------------------------------------------------------- */
+/* Crypto */
+/* ------------------------------------------------------------------------- */
+/* RSA */
+#undef NO_RSA
+#if 1
+    #ifdef USE_FAST_MATH
+        /* Maximum math bits (Max RSA key bits * 2) */
+        #define FP_MAX_BITS 4096
+    #endif
+
+    /* half as much memory but twice as slow */
+    //#define RSA_LOW_MEM
+
+    /* Enables blinding mode, to prevent timing attacks */
+    #define WC_RSA_BLINDING
+
+    /* RSA PSS Support */
+    #define WC_RSA_PSS
+#else
+    #define NO_RSA
+#endif
+
+/* DH */
+#undef  NO_DH
+#if 0
+    /* Use table for DH instead of -lm (math) lib dependency */
+    #if 1
+        #define WOLFSSL_DH_CONST
+        #define HAVE_FFDHE_2048
+        //#define HAVE_FFDHE_4096
+        //#define HAVE_FFDHE_6144
+        //#define HAVE_FFDHE_8192
+    #endif
+#else
+    #define NO_DH
+#endif
+
+/* ECC */
+#undef HAVE_ECC
+#if 1
+    #define HAVE_ECC
+
+    /* Manually define enabled curves */
+    #define ECC_USER_CURVES
+
+    #ifdef ECC_USER_CURVES
+        /* Manual Curve Selection */
+        //#define HAVE_ECC192
+        //#define HAVE_ECC224
+        #undef NO_ECC256
+        #define HAVE_ECC384
+        //#define HAVE_ECC521
+    #endif
+
+    /* Fixed point cache (speeds repeated operations against same private key) */
+    //#define FP_ECC
+    #ifdef FP_ECC
+        /* Bits / Entries */
+        #define FP_ENTRIES  2
+        #define FP_LUT      4
+    #endif
+
+    /* Optional ECC calculation method */
+    /* Note: doubles heap usage, but slightly faster */
+    #define ECC_SHAMIR
+
+    /* Reduces heap usage, but slower */
+    #define ECC_TIMING_RESISTANT
+
+    /* Compressed ECC Key Support */
+    //#define HAVE_COMP_KEY
+
+    /* Use alternate ECC size for ECC math */
+    #ifdef USE_FAST_MATH
+        /* MAX ECC BITS = ROUND8(MAX ECC) * 2 */
+        #if defined(NO_RSA) && defined(NO_DH)
+            /* Custom fastmath size if not using RSA/DH */
+            #define FP_MAX_BITS     (256 * 2)
+        #else
+            /* use heap allocation for ECC points */
+            #define ALT_ECC_SIZE
+
+            /* wolfSSL will compute the FP_MAX_BITS_ECC, but it can be overriden */
+            //#define FP_MAX_BITS_ECC (256 * 2)
+        #endif
+
+        /* Speedups specific to curve */
+        #ifndef NO_ECC256
+            #define TFM_ECC256
+        #endif
+    #endif
+#endif
+
+
+/* AES */
+#undef NO_AES
+#if 1
+    #define HAVE_AES_CBC
+
+    /* GCM Method: GCM_TABLE_4BIT, GCM_SMALL, GCM_WORD32 or GCM_TABLE */
+    #define HAVE_AESGCM
+    #define GCM_SMALL
+
+    #define WOLFSSL_AES_DIRECT
+    #define HAVE_AES_ECB
+#else
+    #define NO_AES
+#endif
+
+
+/* DES3 */
+#undef NO_DES3
+#if 0
+#else
+    #define NO_DES3
+#endif
+
+/* ChaCha20 / Poly1305 */
+#undef HAVE_CHACHA
+#undef HAVE_POLY1305
+#if 1
+    #define HAVE_CHACHA
+    #define HAVE_POLY1305
+
+    /* Needed for Poly1305 */
+    #define HAVE_ONE_TIME_AUTH
+#endif
+
+/* Ed25519 / Curve25519 */
+#undef HAVE_CURVE25519
+#undef HAVE_ED25519
+#if 0
+    #define HAVE_CURVE25519
+    #define HAVE_ED25519 /* ED25519 Requires SHA512 */
+
+    /* Optionally use small math (less flash usage, but much slower) */
+    #if 1
+        #define CURVED25519_SMALL
+    #endif
+#endif
+
+
+/* ------------------------------------------------------------------------- */
+/* Hashing */
+/* ------------------------------------------------------------------------- */
+/* Sha */
+#undef NO_SHA
+#if 1
+    /* on by default */
+    /* 1k smaller, but 25% slower */
+    //#define USE_SLOW_SHA
+#else
+    #define NO_SHA
+#endif
+
+/* Sha256 */
+#undef NO_SHA256
+#if 1
+    /* not unrolled - ~2k smaller and ~25% slower */
+    //#define USE_SLOW_SHA256
+
+    /* Sha224 */
+    #if 0
+        #define WOLFSSL_SHA224
+    #endif
+#else
+    #define NO_SHA256
+#endif
+
+/* Sha512 */
+#undef WOLFSSL_SHA512
+#if 0
+    #define WOLFSSL_SHA512
+
+    /* Sha384 */
+    #undef  WOLFSSL_SHA384
+    #if 0
+        #define WOLFSSL_SHA384
+    #endif
+
+    /* over twice as small, but 50% slower */
+    //#define USE_SLOW_SHA512
+#endif
+
+/* Sha3 */
+#undef WOLFSSL_SHA3
+#if 0
+    #define WOLFSSL_SHA3
+#endif
+
+/* MD5 */
+#undef NO_MD5
+#if 0
+    /* on by default */
+#else
+    #define NO_MD5
+#endif
+
+/* HKDF */
+#undef HAVE_HKDF
+#if 1
+    #define HAVE_HKDF
+#endif
+
+/* CMAC */
+#undef WOLFSSL_CMAC
+#if 1
+    #define WOLFSSL_CMAC
+    /* Note: requires WOLFSSL_AES_DIRECT */
+#endif
+
+/* HMAC - on by default */
+#undef NO_HMAC
+#if 1
+    /* on by default */
+#else
+    #define NO_HMAC
+#endif
+
+
+/* ------------------------------------------------------------------------- */
+/* ASN */
+/* ------------------------------------------------------------------------- */
+#if 0
+    /* Use the newer ASN template code */
+    #define WOLFSSL_ASN_TEMPLATE
+    //#define WOLFSSL_CUSTOM_OID
+    //#define HAVE_OID_ENCODING
+    //#define HAVE_OID_DECODING
+#else
+    /* Use the original custom ASN code */
+#endif
+/* Optionally disable time checking for ASN */
+//#define NO_ASN_TIME
+
+
+/* ------------------------------------------------------------------------- */
+/* Benchmark / Test */
+/* ------------------------------------------------------------------------- */
+/* Use reduced benchmark / test sizes */
+#define BENCH_EMBEDDED
+
+/* Use test buffers from array (not filesystem) */
+#ifndef NO_FILESYSTEM
+#define USE_CERT_BUFFERS_256
+#define USE_CERT_BUFFERS_2048
+#endif
+
+
+/* ------------------------------------------------------------------------- */
+/* Debugging */
+/* ------------------------------------------------------------------------- */
+
+#undef DEBUG_WOLFSSL
+#undef NO_ERROR_STRINGS
+#if 0
+    #define DEBUG_WOLFSSL
+    #define WOLFSSL_LOG_PRINTF
+#else
+    #if 0
+        #define NO_ERROR_STRINGS
+    #endif
+#endif
+
+
+/* ------------------------------------------------------------------------- */
+/* Memory */
+/* ------------------------------------------------------------------------- */
+#if 0
+    /* Static memory requires fast math or SP math with no malloc */
+    #define WOLFSSL_STATIC_MEMORY
+
+    /* Disable fallback malloc/free */
+    #define WOLFSSL_NO_MALLOC
+    #if 1
+        #define WOLFSSL_MALLOC_CHECK /* trap malloc failure */
+    #endif
+#endif
+
+
+/* ------------------------------------------------------------------------- */
+/* Enable Features */
+/* ------------------------------------------------------------------------- */
+
+#define WOLFSSL_TLS13
+#define WOLFSSL_OLD_PRIME_CHECK /* Use faster DH prime checking */
+#define HAVE_TLS_EXTENSIONS
+#define HAVE_SUPPORTED_CURVES
+#define WOLFSSL_BASE64_ENCODE
+
+//#define WOLFSSL_KEY_GEN /* For RSA Key gen only */
+//#define KEEP_PEER_CERT
+//#define HAVE_COMP_KEY
+
+/* TLS Session Cache */
+#if 0
+    #define SMALL_SESSION_CACHE
+#else
+    #define NO_SESSION_CACHE
+#endif
+
+
+/* ------------------------------------------------------------------------- */
+/* Disable Features */
+/* ------------------------------------------------------------------------- */
+//#define NO_WOLFSSL_SERVER
+//#define NO_WOLFSSL_CLIENT
+//#define NO_CRYPT_TEST
+//#define NO_CRYPT_BENCHMARK
+//#define WOLFCRYPT_ONLY
+
+/* In-lining of misc.c functions */
+/* If defined, must include wolfcrypt/src/misc.c in build */
+/* Slower, but about 1k smaller */
+//#define NO_INLINE
+
+#define NO_WRITEV
+#define NO_MAIN_DRIVER
+//#define NO_DEV_RANDOM
+
+#define NO_OLD_TLS
+#define NO_PSK
+
+#define NO_DSA
+#define NO_RC4
+#define NO_MD4
+#define NO_PWDBASED
+//#define NO_CODING
+//#define NO_CERTS
+//#define NO_SIG_WRAPPER
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* WOLFSSL_USER_SETTINGS_H */

IDE/AURIX/wolf_main.c

@@ -0,0 +1,150 @@
+/* wolf_main.c
+ *
+ * Copyright (C) 2006-2023 wolfSSL Inc.
+ *
+ * This file is part of wolfSSL.
+ *
+ * wolfSSL is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * wolfSSL is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
+ */
+
+
+/* wolfSSL includes */
+#ifndef WOLFSSL_USER_SETTINGS
+    #include <wolfssl/options.h>
+#endif
+#include <wolfssl/wolfcrypt/settings.h>
+#include <wolfssl/wolfcrypt/error-crypt.h>
+#include <wolfssl/wolfcrypt/random.h> /* for CUSTOM_RAND_TYPE */
+#include <wolfcrypt/test/test.h>
+#include <wolfcrypt/benchmark/benchmark.h>
+
+#include <stdint.h>
+#include <stdio.h>
+#include <stdarg.h>
+#include <string.h>
+
+/* Infineon Includes */
+#include "Ifx_Types.h"
+#include "IfxStm.h"
+
+extern int send_UART(const char* str);
+static void my_logging_cb(const int logLevel, const char *const logMessage)
+{
+    send_UART(logMessage);
+    send_UART("\r\n");
+    (void)logLevel; /* not used */
+}
+
+/* TIME CODE */
+/* Optionally you can define NO_ASN_TIME to disable all cert time checks */
+static int hw_get_time_sec(void)
+{
+    /* get time in seconds */
+    return IfxStm_get(&MODULE_STM0) / IfxStm_getFrequency(&MODULE_STM0);
+}
+
+/* This is used by wolfCrypt asn.c for cert time checking */
+unsigned long my_time(unsigned long* timer)
+{
+    (void)timer;
+    return hw_get_time_sec();
+}
+
+#ifndef WOLFCRYPT_ONLY
+/* This is used by TLS only */
+unsigned int LowResTimer(void)
+{
+    return hw_get_time_sec();
+}
+#endif
+
+#ifndef NO_CRYPT_BENCHMARK
+/* This is used by wolfCrypt benchmark tool only */
+double current_time(int reset)
+{
+    double timeNow;
+    uint64_t timeMs, ticks = IfxStm_get(&MODULE_STM0);
+    (void)reset;
+    timeMs = ticks / (IfxStm_getFrequency(&MODULE_STM0) / 1000);
+    timeNow = (timeMs / 1000); // sec
+    timeNow += (double)(timeMs % 1000) / 1000; // ms
+    return timeNow;
+}
+#endif
+
+/* RNG CODE */
+/* TODO: Implement real RNG */
+static unsigned int gCounter;
+unsigned int hw_rand(void)
+{
+    //#warning Must implement your own random source
+
+    return ++gCounter;
+}
+
+unsigned int my_rng_seed_gen(void)
+{
+    return hw_rand();
+}
+
+typedef struct func_args {
+    int    argc;
+    char** argv;
+    int    return_code;
+} func_args;
+
+void run_wolf_tests(void)
+{
+    func_args args;
+
+#ifdef DEBUG_WOLFSSL
+    wolfSSL_Debugging_ON();
+#endif
+    wolfSSL_SetLoggingCb(my_logging_cb);
+
+    /* initialize wolfSSL */
+#ifdef WOLFCRYPT_ONLY
+    wolfCrypt_Init();
+#else
+    wolfSSL_Init();
+#endif
+
+    memset(&args, 0, sizeof(args));
+    args.return_code = NOT_COMPILED_IN; /* default */
+
+    printf("Running wolfCrypt Tests...\n");
+#ifndef NO_CRYPT_TEST
+    args.return_code = 0;
+    wolfcrypt_test(&args);
+    printf("Crypt Test: Return code %d\n", args.return_code);
+#else
+    args.return_code = NOT_COMPILED_IN;
+#endif
+
+    printf("Running wolfCrypt Benchmarks...\n");
+#ifndef NO_CRYPT_BENCHMARK
+    args.return_code = 0;
+    benchmark_test(&args);
+#else
+    args.return_code = NOT_COMPILED_IN;
+#endif
+    printf("Benchmark Test: Return code %d\n", args.return_code);
+
+#ifdef WOLFCRYPT_ONLY
+    wolfCrypt_Cleanup();
+#else
+    wolfSSL_Cleanup();
+#endif
+}

IDE/Android/Android.bp

@@ -17,6 +17,11 @@ cc_library_shared {
         "-DWOLFSSL_USER_SETTINGS",
         "-Os",
         "-fomit-frame-pointer",
+
+        /* If using WOLFSSL_ARMASM then add these cflags for ARM crypto extensions */
+        /* "-mcpu=cortex-a73+crypto", */
+        /* "-march=armv8-a", */
+        /* "-mstrict-align", */
     ],
     include_dirs: [
         "external/wolfssl/wolfssl",
@@ -68,10 +73,9 @@ cc_library_shared {
         "./wolfcrypt/src/ge_operations.c",
         "./wolfcrypt/src/hash.c",
         "./wolfcrypt/src/kdf.c",
-        "./wolfcrypt/src/hc128.c",
         "./wolfcrypt/src/hmac.c",
-        "./wolfcrypt/src/idea.c",
         "./wolfcrypt/src/integer.c",
+        "./wolfcrypt/src/kdf.c",
         "./wolfcrypt/src/logging.c",
         "./wolfcrypt/src/md2.c",
         "./wolfcrypt/src/md4.c",
@@ -81,7 +85,6 @@ cc_library_shared {
         "./wolfcrypt/src/pkcs7.c",
         "./wolfcrypt/src/poly1305.c",
         "./wolfcrypt/src/pwdbased.c",
-        "./wolfcrypt/src/rabbit.c",
         "./wolfcrypt/src/random.c",
         "./wolfcrypt/src/rc2.c",
         "./wolfcrypt/src/ripemd.c",

IDE/Android/user_settings.h

@@ -8,12 +8,32 @@
     #define HAVE_FIPS
 #endif
 
+#ifdef __aarch64__
+    #if !defined(__clang__) || \
+        (defined(__clang__) && defined(__clang_major__) && __clang_major__ >= 5)
+        /* older clang v4 has issue with inline assembly constraints */
+        #define WOLFSSL_ARMASM
+    #endif
+#endif
+
+#if 1 /* SP Assembly Speedups (wPAA) */
+    #define WOLFSSL_SP
+    #define WOLFSSL_SP_SMALL      /* use smaller version of code */
+    #define WOLFSSL_HAVE_SP_RSA
+    #define WOLFSSL_HAVE_SP_DH
+    #define WOLFSSL_HAVE_SP_ECC
+    #ifdef WOLFSSL_ARMASM
+        #define WOLFSSL_SP_ARM64_ASM
+    #endif
+#endif
+
 /* WPA Supplicant Support */
 #define WOLFSSL_WPAS_SMALL
 #define OPENSSL_ALL
 #define HAVE_THREAD_LS
 
 #define USE_FAST_MATH
+#define FP_MAX_BITS (4096*2) /* Maximum math bits (Max RSA key bits * 2) */
 #define TFM_TIMING_RESISTANT
 #define ECC_TIMING_RESISTANT
 #define WC_RSA_BLINDING
@@ -22,8 +42,8 @@
 
 #if 1
     #define WOLFSSL_TLS13
-    #define WC_RSA_PSS
 #endif
+#define WC_RSA_PSS
 #define HAVE_SESSION_TICKET
 #define HAVE_TLS_EXTENSIONS
 #define HAVE_SUPPORTED_CURVES
@@ -38,7 +58,7 @@
 #define HAVE_PK_CALLBACKS
 /* crypto callback support is not in FIPS 3389 */
 #ifndef HAVE_FIPS
-    #define WOLF_CRYPTO_CB 
+    #define WOLF_CRYPTO_CB
 #endif
 
 #define KEEP_OUR_CERT
@@ -58,7 +78,10 @@
 #define WOLFSSL_KEY_GEN
 #define WC_RSA_NO_PADDING
 
+#define WOLFSSL_DH_CONST
 #define HAVE_FFDHE_2048
+#define HAVE_FFDHE_3072
+#define HAVE_FFDHE_4096
 #define HAVE_DH_DEFAULT_PARAMS
 #ifdef HAVE_FIPS
     #define WOLFSSL_VALIDATE_FFC_IMPORT
@@ -68,6 +91,9 @@
 #define WOLFSSL_SHA224
 #define WOLFSSL_SHA512
 #define WOLFSSL_SHA384
+#define WOLFSSL_NOSHA512_256
+#define WOLFSSL_NOSHA512_224
+#define WOLFSSL_SHA3
 
 #define HAVE_HKDF
 #define HAVE_PKCS8
@@ -80,6 +106,9 @@
     #define HAVE_ECC_CDH
     #define WOLFSSL_VALIDATE_ECC_IMPORT
 #endif
+#ifdef __i386
+    #define TFM_NO_ASM
+#endif
 
 #define HAVE_AESGCM
 #define HAVE_AESCCM
@@ -93,9 +122,6 @@
 
 #define NO_DSA
 #define NO_RC4
-#define NO_HC128
-#define NO_RABBIT
-#define NO_RC4
 #define NO_PSK
 #define WOLFSSL_NO_SHAKE256
 #define NO_MD4

IDE/CRYPTOCELL/main.c

@@ -1,6 +1,6 @@
 /* main.c
  *
- * Copyright (C) 2006-2021 wolfSSL Inc.
+ * Copyright (C) 2006-2023 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *
@@ -19,6 +19,7 @@
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
  */
 
+
 #include <wolfssl/wolfcrypt/settings.h>
 #include <wolfcrypt/test/test.h>
 #include <wolfcrypt/benchmark/benchmark.h>

IDE/CRYPTOCELL/user_settings.h

@@ -1,6 +1,6 @@
 /* user_settings.h
  *
- * Copyright (C) 2006-2021 wolfSSL Inc.
+ * Copyright (C) 2006-2023 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *
@@ -558,12 +558,6 @@ extern "C" {
 #undef  NO_OLD_TLS
 #define NO_OLD_TLS
 
-#undef  NO_HC128
-#define NO_HC128
-
-#undef  NO_RABBIT
-#define NO_RABBIT
-
 #undef  NO_PSK
 #define NO_PSK
 

IDE/ECLIPSE/DEOS/deos_malloc.c

@@ -1,6 +1,6 @@
 /* deos_malloc.c
  *
- * Copyright (C) 2006-2021 wolfSSL Inc.
+ * Copyright (C) 2006-2023 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/ECLIPSE/DEOS/deos_wolfssl/.project

@@ -424,21 +424,11 @@
 			<type>1</type>
 			<locationURI>WOLFSSL_ROOT/wolfcrypt/src/hash.c</locationURI>
 		</link>
-		<link>
-			<name>wolfcrypt/src/hc128.c</name>
-			<type>1</type>
-			<locationURI>WOLFSSL_ROOT/wolfcrypt/src/hc128.c</locationURI>
-		</link>
 		<link>
 			<name>wolfcrypt/src/hmac.c</name>
 			<type>1</type>
 			<locationURI>WOLFSSL_ROOT/wolfcrypt/src/hmac.c</locationURI>
 		</link>
-		<link>
-			<name>wolfcrypt/src/idea.c</name>
-			<type>1</type>
-			<locationURI>WOLFSSL_ROOT/wolfcrypt/src/idea.c</locationURI>
-		</link>
 		<link>
 			<name>wolfcrypt/src/integer.c</name>
 			<type>1</type>
@@ -489,11 +479,6 @@
 			<type>1</type>
 			<locationURI>WOLFSSL_ROOT/wolfcrypt/src/pwdbased.c</locationURI>
 		</link>
-		<link>
-			<name>wolfcrypt/src/rabbit.c</name>
-			<type>1</type>
-			<locationURI>WOLFSSL_ROOT/wolfcrypt/src/rabbit.c</locationURI>
-		</link>
 		<link>
 			<name>wolfcrypt/src/random.c</name>
 			<type>1</type>

IDE/ECLIPSE/DEOS/tls_wolfssl.c

@@ -1,6 +1,6 @@
 /* tls_wolfssl.c
  *
- * Copyright (C) 2006-2021 wolfSSL Inc.
+ * Copyright (C) 2006-2023 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *
@@ -31,19 +31,19 @@ int setupTransport(clientConnectionHandleType* connectionHandle,
                    char* connectionId) {
     int ret, error;
     void * sendBuffer;
-    DWORD bufferSizeInBytes;
+    size_t bufferSizeInBytes;
 
     if ((ret = socketTransportInitialize("mailbox-transport.config",
                                          "transportConfigurationId",
-                                         (DWORD)waitIndefinitely,&error)) != transportSuccess)
+                                         waitIndefinitely,&error)) != transportSuccess)
         printf("Initialize 0x%x, error=%d\n", ret, error);
 
-    else if ((ret = socketTransportClientInitialize((DWORD)waitIndefinitely,
+    else if ((ret = socketTransportClientInitialize(waitIndefinitely,
                                                     &error)) != transportSuccess)
         printf("ClientInitialize 0x%x, error=%d\n", ret, error);
 
     else if ((ret = socketTransportCreateConnection(connectionId,
-                                                    (DWORD)waitIndefinitely,
+                                                    waitIndefinitely,
                                                     COMPATIBILITY_ID_2,
                                                     connectionHandle,
                                                     &sendBuffer,
@@ -53,7 +53,7 @@ int setupTransport(clientConnectionHandleType* connectionHandle,
 
     else if ((ret = socketTransportSetConnectionForThread(currentThreadHandle(),
                                                           *connectionHandle,
-                                                          (DWORD)waitIndefinitely,
+                                                          waitIndefinitely,
                                                           &error)) != transportSuccess)
         printf("SetConnectionForThread 0x%x, error=%d\n", ret, error);
 
@@ -162,7 +162,7 @@ void wolfssl_client_test(uintData_t statusPtr) {
                     TCP_SERVER_IP_ADDR, TCP_SERVER_PORT);
 
     server_addr.sin_family = AF_INET;
-    server_addr.sin_addr = inet_addr(TCP_SERVER_IP_ADDR);
+    server_addr.sin_addr.s_addr = inet_addr(TCP_SERVER_IP_ADDR);
     server_addr.sin_port = htons(TCP_SERVER_PORT);
 
     printf("Calling connect on socket\n");
@@ -407,7 +407,7 @@ void wolfssl_server_test(uintData_t statusPtr)
 
     printf("Setting up server_addr struct\n");
     server_addr.sin_family = AF_INET;
-    server_addr.sin_addr = INADDR_ANY;
+    server_addr.sin_addr.s_addr = INADDR_ANY;
     server_addr.sin_port = htons(TLS_SERVER_PORT);
 
     bindStatus = bind(sock_listen, (sockaddr *) &server_addr, sizeof(server_addr));
@@ -510,7 +510,7 @@ void wolfssl_server_test(uintData_t statusPtr)
                 wolfSSL_CTX_free(ctx);
                 return;
             }
-            /* goToSleep() for 500 milli sec*/
+            /* goToSleep() for 500 milliseconds */
         }
     } while ((ret != SSL_SUCCESS) && (error == SSL_ERROR_WANT_READ));
 
@@ -580,14 +580,14 @@ int  wolfsslRunTests (void)
         ts = createThread("TCPclient", "TCPThreadTemplate", wolfssl_client_test,
                           0, &TCPhandle );
         if (ts != threadSuccess) {
-            printf("Unable to create TCP client thread, %i ", (DWORD)ts);
+            printf("Unable to create TCP client thread, %i ", (size_t)ts);
         }
     #endif
     #if !defined(NO_WOLFSSL_SERVER)
         ts = createThread("TCPserver", "TCPThreadTemplate", wolfssl_server_test,
                           0, &TCPhandle );
         if (ts != threadSuccess) {
-            printf("Unable to create TCP server thread, %i ", (DWORD)ts);
+            printf("Unable to create TCP server thread, %i ", (size_t)ts);
         }
     #endif
 

IDE/ECLIPSE/DEOS/tls_wolfssl.h

@@ -1,6 +1,6 @@
 /* tls_wolfssl.h
  *
- * Copyright (C) 2006-2021 wolfSSL Inc.
+ * Copyright (C) 2006-2023 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/ECLIPSE/DEOS/user_settings.h

@@ -1,6 +1,6 @@
 /* user_setting.h
  *
- * Copyright (C) 2006-2021 wolfSSL Inc.
+ * Copyright (C) 2006-2023 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *
@@ -26,75 +26,141 @@
     extern "C" {
 #endif
 
-#define WOLFSSL_DEOS
+#if 0
+    /* RTEMS */
+    #define WOLFSSL_DEOS_RTEMS
 
-/* You can select none or all of the following tests
-using #define instead of #undef.
-By default, all four tests run*/
+    #include <stdio.h>
+    #include <string.h>
+    #include <netinet/in.h>
+    #include <sys/socket.h>
+    #include <pthread.h>
+    #include <stdint.h>
+    #include <stddef.h>  /* for size_t */
+    #include <stdlib.h> /* for malloc/free */
 
-#undef NO_CRYPT_TEST
-#undef NO_CRYPT_BENCHMARK
-#undef NO_WOLFSSL_CLIENT
-#undef NO_WOLFSSL_SERVER
+    #if (__BYTE_ORDER__ == __ORDER_BIG_ENDIAN__)
+        #define BIG_ENDIAN_ORDER
+    #else
+        #undef  BIG_ENDIAN_ORDER
+        #define LITTLE_ENDIAN_ORDER
+    #endif
+#else
+    /* DEOS Native */
+    #define WOLFSSL_DEOS
+
+    #include <deos.h>
+    #include <timeout.h>
+    #include <socketapi.h>
+    #include <lwip-socket.h>
+    #include <mem.h>
+    #include <string.h>
+    #include <stdlib.h> /* for rand_r: pseudo-random number generator */
+    #include <stdio.h>  /* for snprintf */
+#endif
+
+/* Porting */
 
 /* adjust CURRENT_UNIX_TIMESTAMP to seconds since Jan 01 1970. (UTC)
-You can get the current time from https://www.unixtimestamp.com/
-*/
-#define CURRENT_UNIX_TIMESTAMP 1545864916
+You can get the current time from https://www.unixtimestamp.com/ */
+#define CURRENT_UNIX_TIMESTAMP 1663020069
 
-#define NO_FILESYSTEM
+#define BENCH_EMBEDDED /* use kB instead of mB for embedded benchmarking */
+#define WOLFSSL_IGNORE_FILE_WARN /* ignore warning for include of files not required */
+
+/* Math */
+#define USE_FAST_MATH
+#define FP_MAX_BITS (4096*2)
 #define SIZEOF_LONG_LONG 8
+#define TFM_TIMING_RESISTANT
+#define ECC_TIMING_RESISTANT
+#define WC_RSA_BLINDING
 
-/* prevents from including multiple definition of main() */
-#define NO_MAIN_DRIVER
-#define NO_TESTSUITE_MAIN_DRIVER
+/* Wolf Single Precision Math */
+#undef WOLFSSL_SP
+#if 1
+    #define WOLFSSL_HAVE_SP_RSA
+    #define WOLFSSL_HAVE_SP_DH
+    #define WOLFSSL_HAVE_SP_ECC
+    #define WOLFSSL_SP_4096 /* Enable RSA/RH 4096-bit support */
+    #define WOLFSSL_SP_384 /* Enable ECC 384-bit SECP384R1 support */
 
-/* includes certificate test buffers via header files */
-#define USE_CERT_BUFFERS_2048
+    //#define WOLFSSL_SP_CACHE_RESISTANT
+    #define WOLFSSL_SP_MATH     /* only SP math - disables integer.c/tfm.c */
+    //#define WOLFSSL_SP_MATH_ALL /* use SP math for all key sizes and curves */
 
-/*use kB instead of mB for embedded benchmarking*/
-#define BENCH_EMBEDDED
+    #define WOLFSSL_SP_NO_MALLOC
+    //#define WOLFSSL_SP_DIV_32 /* do not use 64-bit divides */
 
-#define NO_WRITE_TEMP_FILES
+    /* use smaller version of code */
+    #define WOLFSSL_SP_SMALL
+#endif
 
-#define HAVE_AESGCM
-#define WOLFSSL_SHA512
+/* Algorithms */
+#undef NO_RSA
+#undef NO_DH
+#define WOLFSSL_DH_CONST
 #define HAVE_ECC
-#define HAVE_CURVE25519
-#define CURVE25519_SMALL
-#define HAVE_ED25519
-#define ED25519_SMALL
+#define ECC_USER_CURVES
+#define HAVE_ECC384
 
-#define WOLFSSL_DTLS
+#if 1
+    #define HAVE_CURVE25519
+    #define HAVE_ED25519
+    #define CURVED25519_SMALL
+#endif
+
+#undef NO_SHA
+#undef NO_MD5
+#undef NO_SHA256
+#define HAVE_AESGCM
+#define WOLFSSL_SHA384
+#define WOLFSSL_SHA512
+
+/* TLS */
+#define HAVE_TLS_EXTENSIONS
+#define HAVE_SUPPORTED_CURVES
+#define HAVE_EXTENDED_MASTER
+#define HAVE_ENCRYPT_THEN_MAC
+
+//#define WOLFSSL_DTLS
+//#define WOLFSSL_DTLS13
+//#define WOLFSSL_NO_TLS12
 
-/* TLS 1.3 */
 #if 0
+    /* TLS 1.3 */
     #define WOLFSSL_TLS13
     #define WC_RSA_PSS
     #define HAVE_HKDF
     #define HAVE_FFDHE_2048
-    #define HAVE_AEAD
+    #define HAVE_FFDHE_3072
+    #define HAVE_FFDHE_4096
 #endif
 
+/* wolfSentry */
 #if 0
-
-/* You can use your own custom random generator function with
-   no input parameters and a `CUSTOM_RAND_TYPE` return type*/
-
-    #ifndef CUSTOM_RAND_GENERATE
-         #define CUSTOM_RAND_TYPE     int
-         #define CUSTOM_RAND_GENERATE yourRandGenFunc
-    #endif
-
+    #define WOLFSSL_WOLFSENTRY_HOOKS
+    #define HAVE_EX_DATA
+    #define HAVE_EX_DATA_CLEANUP_HOOKS
 #endif
 
-#if 1
-    #undef  XMALLOC_OVERRIDE
+/* compatibility layer */
+#if 0
+    #define OPENSSL_EXTRA
+#endif
+
+/* Random */
+#ifdef WOLFSSL_DEOS_RTEMS
+    extern int rtems_wolf_seed(unsigned char* output, unsigned int sz);
+    #define CUSTOM_RAND_GENERATE_SEED rtems_wolf_seed
+#endif
+
+/* custom heap handling */
+#ifdef WOLFSSL_DEOS
+    #define WOLFSSL_NO_MALLOC
     #define XMALLOC_OVERRIDE
+
     /* prototypes for user heap override functions */
-
-    #include <stddef.h>  /* for size_t */
-
     extern void *malloc_deos(size_t size);
     extern void  free_deos(void *ptr);
     extern void *realloc_deos(void *ptr, size_t size);
@@ -102,9 +168,40 @@ You can get the current time from https://www.unixtimestamp.com/
     #define XMALLOC(n, h, t)     malloc_deos(n)
     #define XFREE(p, h, t)       free_deos(p)
     #define XREALLOC(p, n, h, t) realloc_deos(p, n)
-
 #endif
 
+#if 0
+    #define DEBUG_WOLFSSL
+#endif
+
+/* You can select none or all of the following tests
+ * using #define instead of #undef.
+ * By default, all four tests run*/
+#define NO_CRYPT_TEST
+#define NO_CRYPT_BENCHMARK
+#undef NO_WOLFSSL_CLIENT
+#undef NO_WOLFSSL_SERVER
+
+/* file system has not been ported since it is a separate product */
+#define NO_FILESYSTEM
+#define NO_WOLFSSL_DIR
+#define NO_WRITEV
+#define NO_WRITE_TEMP_FILES
+
+/* disable old protocols and algorithms */
+#define NO_OLD_TLS
+#define NO_PSK
+#define NO_DSA
+#define NO_RC4
+#define NO_MD4
+
+#define NO_PWDBASED
+
+/* prevents from including multiple definition of main() */
+#define NO_MAIN_DRIVER
+#define NO_TESTSUITE_MAIN_DRIVER
+
+
 #ifdef __cplusplus
     }   /* extern "C" */
 #endif

IDE/ECLIPSE/MICRIUM/README.md

@@ -40,7 +40,7 @@ The folder hierarchy is the same as the wolfSSL folders with an exception of the
 
 4. Right click on each folders, add or link all the source code in the corresponding folder in wolfSSL.
 
-5. Remove non-C platform dependent files from your build. At the moment, only aes_asm.asm and aes_asm.s must be removed from your wolfssl/wolfcrypt/src folder.
+5. Remove non-C platform dependent files from your build. At the moment, only aes_asm.asm, aes_gcm_asm.asm and aes_asm.s must be removed from your wolfssl/wolfcrypt/src folder.
 
 6. In your C/C++ compiler preprocessor settings, add the wolfSSL directories to your include paths.
 Here's an example of the paths that must be added.
@@ -93,8 +93,6 @@ HMAC-SHA test passed!
 HAC-SHA256 test passed!
 HMAC-SHA512 test passed!
 GMC     test passed!
-HC-128   test passed!
-Rabbit   test passed!
 DS      test passed!
 DS3     test passed!
 AES      test passed!

IDE/ECLIPSE/MICRIUM/client_wolfssl.c

@@ -1,6 +1,6 @@
 /* client_wolfssl.c
  *
- * Copyright (C) 2006-2021 wolfSSL Inc.
+ * Copyright (C) 2006-2023 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/ECLIPSE/MICRIUM/client_wolfssl.h

@@ -1,6 +1,6 @@
 /* client_wolfssl.h
  *
- * Copyright (C) 2006-2021 wolfSSL Inc.
+ * Copyright (C) 2006-2023 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/ECLIPSE/MICRIUM/server_wolfssl.c

@@ -1,6 +1,6 @@
 /* server_wolfssl.c
  *
- * Copyright (C) 2006-2021 wolfSSL Inc.
+ * Copyright (C) 2006-2023 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/ECLIPSE/MICRIUM/server_wolfssl.h

@@ -1,6 +1,6 @@
 /* server_wolfssl.h
  *
- * Copyright (C) 2006-2021 wolfSSL Inc.
+ * Copyright (C) 2006-2023 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/ECLIPSE/MICRIUM/user_settings.h

@@ -1,6 +1,6 @@
 /* user_setting.h
  *
- * Copyright (C) 2006-2021 wolfSSL Inc.
+ * Copyright (C) 2006-2023 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/ECLIPSE/MICRIUM/wolfsslRunTests.c

@@ -1,6 +1,6 @@
 /* wolfsslRunTests.c
  *
- * Copyright (C) 2006-2021 wolfSSL Inc.
+ * Copyright (C) 2006-2023 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/ECLIPSE/RTTHREAD/README.md

@@ -93,8 +93,6 @@ HMAC-SHA512 test passed!
 X963-KDF    test passed!
 GMAC     test passed!
 ARC4     test passed!
-HC-128   test passed!
-Rabbit   test passed!
 DES      test passed!
 DES3     test passed!
 AES      test passed!
@@ -172,4 +170,4 @@ ED     25519 verify          2 ops took 1.000 sec, avg 500.000 ms, 2.000 ops/sec
 
 ## References
 
-For more information please contact info@wolfssl.com.
+For more information please contact info@wolfssl.com.

IDE/ECLIPSE/RTTHREAD/user_settings.h

@@ -1,6 +1,6 @@
 /* user_setting.h
  *
- * Copyright (C) 2006-2021 wolfSSL Inc.
+ * Copyright (C) 2006-2023 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/ECLIPSE/RTTHREAD/wolfssl_test.c

@@ -1,6 +1,6 @@
 /* wolfsslRunTests.c
  *
- * Copyright (C) 2006-2021 wolfSSL Inc.
+ * Copyright (C) 2006-2023 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/Espressif/ESP-IDF/README.md

@@ -1,10 +1,16 @@
 # ESP-IDF port
+
+NOTICE: These Espressif examples have been created and tested with the latest stable release branch of 
+[ESP-IDF V4](https://docs.espressif.com/projects/esp-idf/en/v4.4.1/esp32/get-started/index.html)
+and have not yet been upgraded to the master branch V5. 
+See the latest [migration guides](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/migration-guides/index.html).
+
 ## Overview
  ESP-IDF development framework with wolfSSL by setting *WOLFSSL_ESPIDF* definition
 
 Including the following examples:
 
-* Simple [tls_client](./examples/wolfssl_client/)/[server](./examples/wolfssl_server/)
+* Simple [TLS client](./examples/wolfssl_client/)/[server](./examples/wolfssl_server/)
 * Cryptographic [test](./examples/wolfssl_test/)
 * Cryptographic [benchmark](./examples/wolfssl_benchmark/)
 
@@ -13,21 +19,16 @@ Including the following examples:
 ## Requirements
  1. [ESP-IDF development framework](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/)
 
-    Note: This expects to use Linux version.
-
 ## Setup for Linux
  1. Run `setup.sh` at _/path/to_`/wolfssl/IDE/Espressif/ESP-IDF/` to deploy files into ESP-IDF tree  
-    For Windows : Run `setup_win.bat` at `.\IDE\Espressif\ESP-IDF\`
-    
  2. Find Wolfssl files at _/path/to/esp_`/esp-idf/components/wolfssl/`
- 
  3. Find [Example programs](https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples) under _/path/to/esp_`/esp-idf/examples/protocols/wolfssl_xxx` (where xxx is the project name)
 
- 4. Uncomment out `#define WOLFSSL_ESPIDF` in _/path/to/esp_`/esp-idf/components/wolfssl/wolfssl/wolfcrypt/settings.h`  
-    Uncomment out `#define WOLFSSL_ESPWROOM32` in _/path/to/esp_`/esp-idf/components/wolfssl/wolfssl/wolfcrypt/settings.h`
-    
-    for example the default:
-    `~/esp/esp-idf/components/wolfssl/wolfssl/wolfcrypt/settings.h`
+## Setup for Windows
+ 1. Run ESP-IDF Command Prompt (cmd.exe) or Run ESP-IDF PowerShell Environment
+ 2. Run `setup_win.bat` at `.\IDE\Espressif\ESP-IDF\`
+ 3. Find Wolfssl files at _/path/to/esp_`/esp-idf/components/wolfssl/`
+ 4. Find [Example programs](https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples) under _/path/to/esp_`/esp-idf/examples/protocols/wolfssl_xxx` (where xxx is the project name)
 
 ## Configuration
  1. The `user_settings.h` can be found in _/path/to/esp_`/esp-idf/components/wolfssl/include/user_settings.h`
@@ -39,7 +40,6 @@ Including the following examples:
  For question please email [support@wolfssl.com]
 
  Note: This is tested with :  
-   - OS: Ubuntu 18.04.1 LTS and Microsoft Windows 10 Pro 10.0.19041 and well as WSL Ubuntu
-   - ESP-IDF: v4.1 and v4.0.1  
+   - OS: Ubuntu 20.04.3 LTS and Microsoft Windows 10 Pro 10.0.19041 and well as WSL Ubuntu
+   - ESP-IDF: ESP-IDF v4.3.2
    - Module : ESP32-WROOM-32
-

IDE/Espressif/ESP-IDF/README_32se.md

@@ -4,7 +4,7 @@
 
 Including the following examples:
 
-* simple `tls_client`/`tls_server`
+* simple `TLS client`/`server`
 * crypt benchmark
 
  The `user_settings.h` file enables some of the hardened settings.
@@ -15,11 +15,11 @@ Including the following examples:
 2. Microchip CryptoAuthentication Library: https://github.com/MicrochipTech/cryptoauthlib
 
 ## Setup
-1. wolfSSL under ESP-IDF. Please see [README.md](https://github.com/wolfSSL/wolfssl/blob/master/IDE/Espressif/ESP-IDF/README.md)
-2. CryptoAuthentication Library under ESP-IDF. Please see [README.md](https://github.com/miyazakh/cryptoauthlib_esp_idf/blob/master/README.md)
-3. Uncomment out `#define WOLFSSL_ESPWROOM32SE` in `/path/to/wolfssl/wolfssl/wolfcrypt/settings.h`
-    * **Note:** Need to enable `WOLFSSL_ESPIDF`
+1. Comment out `#define WOLFSSL_ESPWROOM32` in `/path/to/wolfssl/IDE/Espressif/ESP-IDF/user_settings.h`\
+   Uncomment out `#define WOLFSSL_ESPWROOM32SE` in `/path/to/wolfssl/IDE/Espressif/ESP-IDF/user_settings.h`
     * **Note:** crypt test will fail if enabled `WOLFSSL_ESPWROOM32SE`
+3. wolfSSL under ESP-IDF. Please see [README.md](https://github.com/wolfSSL/wolfssl/blob/master/IDE/Espressif/ESP-IDF/README.md)
+4. CryptoAuthentication Library under ESP-IDF. Please see [README.md](https://github.com/miyazakh/cryptoauthlib_esp_idf/blob/master/README.md)
 
 ## Configuration
 1. The `user_settings.h` can be found in `/path/to/esp-idf/components/wolfssl/include/user_settings.h`

IDE/Espressif/ESP-IDF/UPDATE.md

@@ -0,0 +1,23 @@
+# Espressif Updates
+
+See [#5795]()
+
+## Changes in November 2022
+
+Updates to Espressif ESP-IDF wolfssl_benchmark and wolfssl_test examples:
+
+- Benchmark example no longer runs tests.
+- Fixed Test example that was missing code files. (no longer installed locally)
+- Rename `benchmark/main` and `test/main` filenames from `helper.c` to `main.c`, cleaned up.
+- Added `main.h`
+- Revised `main/CMakeLists.txt` to use only `main.c`
+- Set components `main` and `wolfssl` for project `CMakeLists.txt`
+- Update wolfcrypt esp32_sha.c and sha256.c to now report unexpected reentry as verbose log rather than error message.
+- `wolfcrypt/test.c` now returns `args.return_code` when `WOLFSSL_ESPIDF` is defined.
+- `wolfcrypt/test.h` now declares `int wolf_test_task(void)` when `WOLFSSL_ESPIDF` is defined.
+- `setup.sh` no longer copies benchmark.c(.h) to local project directory.
+- Added `libs/Tigard.cfg` file for Tigard JTAG debugger.
+- Update `sdkconfig.defaults` with compiler optimizations and stack check.
+- Added VisualGDB Project file & Visual Studio solution file.
+- Added optional `time_helper` for wolfssl_test
+- Exclude `ssl_misc.c` in component cmake to fix warning:  #warning ssl_misc.c does not need to be compiled separately from ssl.c

IDE/Espressif/ESP-IDF/compileAllExamples.sh

@@ -0,0 +1,111 @@
+#!/bin/bash
+#
+# testing script: compileAllExamples
+#
+# This script will compile all the local examples, optionally installing wolfSSL in the ESP-IDF components directory.
+#
+# Example usage:
+#   cd wolfssl && docker run --rm -v $PWD:/project -w /project espressif/idf:latest IDE/Espressif/ESP-IDF/compileAllExamples.sh
+#
+# Parameter option to also run the ./setup.sh to install the wolfSSL component in ESP-IDF and test for multiple installs:
+#
+#   --run-setup
+#
+# Note that once installed, the wolfSSL component will need to be manually removed to successfully run this script.
+#
+if  [[ "$IDF_PATH" == "" ]]; then
+    echo "Error: $IDF_PATH not found; run Espressif export.sh"
+    exit 1
+fi
+SCRIPT_DIR=$(builtin cd ${BASH_SOURCE%/*}; pwd)
+RUN_SETUP=$1
+THIS_ERR=0
+
+echo "Found IDF_PATH = $IDF_PATH"
+
+# Regular tests of wolfSSL in local component directories of each project:
+#
+# Note these tests should FAIL if wolfSSL is already installed in ESP-IDF
+#
+for file in "benchmark" "client" "server" "test"; do
+    pushd ${SCRIPT_DIR}/examples/wolfssl_${file}/ && idf.py fullclean build;
+    THIS_ERR=$?
+    popd
+    if [ $THIS_ERR -ne 0 ]; then
+        echo "Failed in ${file}"
+        exit 1
+    fi
+done
+
+
+# Check for option to also install wolfSSL.
+#
+# When doing so, we'll run a check that multiple installs should cause build failure.
+if  [[ "$RUN_SETUP" == "--run-setup" ]]; then
+    echo "Running wolfSSL setup.sh"
+
+    # install wolfSSL into EDP-IDF shared components directory.
+    ./setup.sh --verbose
+
+    THIS_ERR=$?
+    if [ $? -ne 0 ]; then
+        echo "Failed running setup.sh"
+        exit 1
+    fi
+
+    # Check ESP-IDF install:
+    #
+    # The wolfssl_test_idf should NOT have a local components/wolfssl when testing!
+    # This test is to confirm the ESP-IDF component build properly after setup.
+    #
+    echo ""
+    echo "Testing a build of wolfSSL in ESP-IDF components directory"
+    echo ""
+    for file in "test_idf"; do
+        pushd ${SCRIPT_DIR}/examples/wolfssl_${file}/ && idf.py fullclean build;
+        THIS_ERR=$?
+        popd
+        if [ $? -ne 0 ]; then
+            echo "Failed in ${file}"
+            exit 1
+        fi
+    done
+
+    # Check multiple installs: the wolfSSL component in ESP-IDF and local directory:
+    #
+    # The wolfssl_test project already has a local wolfSSL component directory.
+    #
+    # Once wolfssl has been installed to ESP-IDF components, the local
+    # component build SHOULD fail:
+    echo ""
+    echo "Testing a build of wolfSSL in both local and ESP-IDF components directory"
+    echo ""
+    for file in "test"; do
+        pushd ${SCRIPT_DIR}/examples/wolfssl_${file}/ && idf.py fullclean build;
+        THIS_ERR=$?
+        popd
+        if [ $THIS_ERR -ne 0 ]; then
+            echo ""
+            echo "Success: Confirmed build fails when wolfSSL found in ESP-IDF and local project."
+            echo ""
+        else
+            echo "Error: build should have failed when wolfSSL found in ESP-IDF and local project."
+            exit 1
+        fi
+    done
+else
+    echo "Skipping ESP-IDF install tests. For these tests, use parameter: --run-setup"
+fi
+
+
+# Show a reminder that wolfSSL was installed as a shared component.
+if  [[ "$RUN_SETUP" == "--run-setup" ]]; then
+    echo ""
+    echo "wolfSSL was installed as an ESP-IDF component. This will be in conflict with any project that has a local component."
+    echo ""
+    echo "Delete the installed component before re-running this test."
+    echo ""
+fi
+
+# Done
+echo "Completed compileAllExamples in $SCRIPT_DIR"

IDE/Espressif/ESP-IDF/dummy_config_h

@@ -1,6 +1,6 @@
 /* config.h - dummy
  *
- * Copyright (C) 2006-2021 wolfSSL Inc.
+ * Copyright (C) 2006-2023 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/Espressif/ESP-IDF/dummy_test_paths.h

@@ -0,0 +1,25 @@
+/* wolfcrypt/test/test_paths.h
+ *
+ * Copyright (C) 2006-2023 wolfSSL Inc.
+ *
+ * This file is part of wolfSSL.
+ *
+ * wolfSSL is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * wolfSSL is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
+ */
+
+#ifndef NO_FILESYSTEM
+    #define CERT_PREFIX "@abs_top_srcdir@/"
+    #define CERT_WRITE_TEMP_DIR "@abs_top_builddir@/"
+#endif /* NO_FILESYSTEM */

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/CMakeLists.txt

@@ -3,4 +3,10 @@
 cmake_minimum_required(VERSION 3.5)
 
 include($ENV{IDF_PATH}/tools/cmake/project.cmake)
+
+set(COMPONENTS
+  main
+  wolfssl
+) # set components
+
 project(wolfssl_benchmark)

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/README.md

@@ -1,8 +1,8 @@
-#wolfSSL Example
+# wolfSSL Benchmark Example
 
 The Example contains of wolfSSL benchmark program.
 
-1. "make menuconfig" to configure the program.  
+1. `idf.py menuconfig` to configure the program.  
     1-1. Example Configuration ->
 
     BENCH_ARG : argument that you want to use. Default is "-lng 0"  
@@ -10,7 +10,181 @@ The Example contains of wolfSSL benchmark program.
 
 When you want to run the benchmark program
 
-1. "make flash" to compile and load the firmware
-2. "make monitor" to see the message
+1. `idf.py -p <PORT> flash` to compile and load the firmware
+2. `idf.py monitor` to see the message
 
 See the README.md file in the upper level 'examples' directory for more information about examples.
+
+## Performance
+
+Reminder than when building on WSL in `/mnt/c` there will be a noticeable performance degradation at compile time. Using `~/` will be faster at the cost of shared filesystems.
+
+Example build on WSL:
+
+```
+Optionally install wolfSSL component
+# cd /mnt/c/workspace/wolfssl/IDE/Espressif/ESP-IDF
+./setup.sh
+
+cd /mnt/c/workspace/wolfssl/IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark
+
+# Pick ESP-IDF install directory, this one for v4.4.2 in VisualGDB
+. /mnt/c/SysGCC/esp32/esp-idf/v4.4.2/export.sh
+
+
+idf.py build flash -p /dev/ttyS20 -b 921600 monitor
+```
+
+## Example Output
+
+Note the default wolfSSL `user_settings.h` is configured by default to be the most 
+compatible across the widest ranges of targets. Contact wolfSSL at support@wolfssl.com
+for help in optimizing for your particular application, or see the 
+[docs](https://www.wolfssl.com/documentation/manuals/wolfssl/index.html).
+
+Compiled and flashed with `idf.py build  flash -p /dev/ttyS7 -b 921600 monitor`:
+
+```
+--- idf_monitor on /dev/ttyS7 115200 ---
+--- Quit: Ctrl+] | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H ---
+ (377) cpu_start: Starting scheduler ets Jun  8 2016 00:22:57
+
+rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
+configsip: 0, SPIWP:0xee
+clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
+mode:DIO, clock div:2
+load:0x3fff0030,len:6664
+load:0x40078000,len:14848
+load:0x40080400,len:3792
+0x40080400: _init at ??:?
+
+entry 0x40080694
+I (27) boot: ESP-IDF v4.4.2-dirty 2nd stage bootloader
+I (27) boot: compile time 13:41:41
+I (27) boot: chip revision: 1
+I (30) boot_comm: chip revision: 1, min. bootloader chip revision: 0
+I (37) boot.esp32: SPI Speed      : 40MHz
+I (42) boot.esp32: SPI Mode       : DIO
+I (46) boot.esp32: SPI Flash Size : 2MB
+I (51) boot: Enabling RNG early entropy source...
+I (56) boot: Partition Table:
+I (60) boot: ## Label            Usage          Type ST Offset   Length
+I (67) boot:  0 nvs              WiFi data        01 02 00009000 00006000
+I (75) boot:  1 phy_init         RF data          01 01 0000f000 00001000
+I (82) boot:  2 factory          factory app      00 00 00010000 00100000
+I (90) boot: End of partition table
+I (94) boot_comm: chip revision: 1, min. application chip revision: 0
+I (101) esp_image: segment 0: paddr=00010020 vaddr=3f400020 size=12bf4h ( 76788) map
+I (137) esp_image: segment 1: paddr=00022c1c vaddr=3ffb0000 size=02420h (  9248) load
+I (141) esp_image: segment 2: paddr=00025044 vaddr=40080000 size=0afd4h ( 45012) load
+I (161) esp_image: segment 3: paddr=00030020 vaddr=400d0020 size=33148h (209224) map
+I (237) esp_image: segment 4: paddr=00063170 vaddr=4008afd4 size=00550h (  1360) load
+I (238) esp_image: segment 5: paddr=000636c8 vaddr=50000000 size=00010h (    16) load
+I (249) boot: Loaded app from partition at offset 0x10000
+I (249) boot: Disabling RNG early entropy source...
+I (266) cpu_start: Pro cpu up.
+I (266) cpu_start: Starting app cpu, entry point is 0x40081098
+0x40081098: call_start_cpu1 at /mnt/c/SysGCC/esp32/esp-idf/v4.4.2/components/esp_system/port/cpu_start.c:160
+
+I (0) cpu_start: App cpu up.
+I (280) cpu_start: Pro cpu start user code
+I (280) cpu_start: cpu freq: 240000000
+I (280) cpu_start: Application information:
+I (285) cpu_start: Project name:     wolfssl_benchmark
+I (291) cpu_start: App version:      v5.5.3-stable-108-gbd7b442df-di
+I (298) cpu_start: Compile time:     Nov 17 2022 14:10:03
+I (304) cpu_start: ELF file SHA256:  fbb520f5bbf963a0...
+I (310) cpu_start: ESP-IDF:          v4.4.2-dirty
+I (316) heap_init: Initializing. RAM available for dynamic allocation:
+I (323) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
+I (329) heap_init: At 3FFB3DE8 len 0002C218 (176 KiB): DRAM
+I (335) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
+I (341) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
+I (348) heap_init: At 4008B524 len 00014ADC (82 KiB): IRAM
+I (355) spi_flash: detected chip: generic
+I (359) spi_flash: flash io: dio
+W (362) spi_flash: Detected size(4096k) larger than the size in the binary image header(2048k). Using the size in the binary image header.
+I (377) cpu_start: Starting scheduler on PRO CPU.
+I (0) cpu_start: Starting scheduler on APP CPU.
+I (391) wolfssl_benchmark: app_main CONFIG_BENCH_ARGV = -lng 0
+I (397) wolfssl_benchmark: construct_argv arg:-lng 0
+
+------------------------------------------------------------------------------
+ wolfSSL version 5.5.3
+------------------------------------------------------------------------------
+wolfCrypt Benchmark (block bytes 1024, min 1.0 sec each)
+RNG                          1 MiB took 1.017 seconds,    1.320 MiB/s
+AES-128-CBC-enc              6 MiB took 1.002 seconds,    5.726 MiB/s
+AES-128-CBC-dec              5 MiB took 1.000 seconds,    5.347 MiB/s
+AES-192-CBC-enc              6 MiB took 1.004 seconds,    5.714 MiB/s
+AES-192-CBC-dec              5 MiB took 1.001 seconds,    5.341 MiB/s
+AES-256-CBC-enc              6 MiB took 1.000 seconds,    5.713 MiB/s
+AES-256-CBC-dec              5 MiB took 1.002 seconds,    5.336 MiB/s
+AES-128-GCM-enc            300 KiB took 1.004 seconds,  298.805 KiB/s
+AES-128-GCM-dec            300 KiB took 1.004 seconds,  298.805 KiB/s
+AES-192-GCM-enc            300 KiB took 1.007 seconds,  297.915 KiB/s
+AES-192-GCM-dec            300 KiB took 1.008 seconds,  297.619 KiB/s
+AES-256-GCM-enc            300 KiB took 1.011 seconds,  296.736 KiB/s
+AES-256-GCM-dec            300 KiB took 1.011 seconds,  296.736 KiB/s
+GMAC Default               403 KiB took 1.002 seconds,  402.196 KiB/s
+3DES                       450 KiB took 1.028 seconds,  437.743 KiB/s
+MD5                         14 MiB took 1.001 seconds,   13.756 MiB/s
+SHA                         14 MiB took 1.001 seconds,   14.463 MiB/s
+SHA-256                     14 MiB took 1.000 seconds,   14.233 MiB/s
+SHA-512                     17 MiB took 1.000 seconds,   16.626 MiB/s
+HMAC-MD5                    14 MiB took 1.000 seconds,   13.599 MiB/s
+HMAC-SHA                    14 MiB took 1.000 seconds,   13.989 MiB/s
+HMAC-SHA256                 14 MiB took 1.000 seconds,   13.940 MiB/s
+HMAC-SHA512                 16 MiB took 1.000 seconds,   16.064 MiB/s
+PBKDF2                     640 bytes took 1.009 seconds,  634.291 bytes/s
+RSA     2048   public        52 ops took 1.022 sec, avg 19.654 ms, 50.881 ops/sec
+RSA     2048  private         4 ops took 1.056 sec, avg 264.000 ms, 3.788 ops/sec
+ECC   [      SECP256R1]   256  key gen         4 ops took 1.216 sec, avg 304.000 ms, 3.289 ops/sec
+ECDHE [      SECP256R1]   256    agree         4 ops took 1.215 sec, avg 303.750 ms, 3.292 ops/sec
+ECDSA [      SECP256R1]   256     sign         4 ops took 1.226 sec, avg 306.500 ms, 3.263 ops/sec
+ECDSA [      SECP256R1]   256   verify         2 ops took 1.172 sec, avg 586.000 ms, 1.706 ops/sec
+CURVE  25519  key gen         3 ops took 1.279 sec, avg 426.333 ms, 2.346 ops/sec
+CURVE  25519    agree         4 ops took 1.701 sec, avg 425.250 ms, 2.352 ops/sec
+ED     25519  key gen        46 ops took 1.008 sec, avg 21.913 ms, 45.635 ops/sec
+ED     25519     sign        42 ops took 1.038 sec, avg 24.714 ms, 40.462 ops/sec
+ED     25519   verify        26 ops took 1.009 sec, avg 38.808 ms, 25.768 ops/sec
+Benchmark complete
+```
+
+## Known Issues and Common Issues
+
+### Permission denied
+
+Delete project directory `build`, `.visualgdb` and `.vs` directories. Ensure no other build
+process is using the same files in Windows, WSL, Visual Studio, VSCode, etc.
+
+Example message:
+
+```
+-- Building ESP-IDF components for target esp32
+CMake Error at /mnt/c/SysGCC/esp32/esp-idf/v4.4.2/tools/cmake/component.cmake:131 (file):
+  file failed to open for writing (Permission denied):
+
+    /mnt/c/workspace-pr/wolfssl/IDE/Espressif/ESP-IDF/examples/wolfssl_test/build/bootloader/component_properties.temp.cmake
+```
+
+
+### user_settings.h: No such file or directory
+
+Ensure wolfSSL is installed in the ESP-IDF or local project `components` directory.
+
+Example message:
+
+```
+ esp-idf/main/CMakeFiles/__idf_main.dir/main.c.obj   -c ../main/main.c
+../main/main.c:27:10: fatal error: user_settings.h: No such file or directory
+ #include <user_settings.h>
+          ^~~~~~~~~~~~~~~~~
+compilation terminated.
+```
+
+A 'clean` may be needed after freshly installing a new component:
+
+```
+idf.py clean build  flash -p /dev/ttyS7 -b 921600 monitor
+```

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/VisualGDB/wolfssl_benchmark_IDF_v4.4_ESP32.sln

@@ -0,0 +1,58 @@
+
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio Version 16
+VisualStudioVersion = 16.0.33027.164
+MinimumVisualStudioVersion = 10.0.40219.1
+Project("{803FD0C6-D64E-4E16-9DC3-1DAEC859A3D2}") = "wolfssl_benchmark", "wolfssl_benchmark_IDF_v4.4_ESP32.vgdbproj", "{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}"
+EndProject
+Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "Solution Items", "Solution Items", "{51FEFEA9-C2BA-43A1-8B36-9140367E5AAF}"
+	ProjectSection(SolutionItems) = preProject
+		..\..\..\..\..\..\wolfcrypt\benchmark\benchmark.c = ..\..\..\..\..\..\wolfcrypt\benchmark\benchmark.c
+		..\..\..\..\..\..\wolfcrypt\benchmark\benchmark.h = ..\..\..\..\..\..\wolfcrypt\benchmark\benchmark.h
+		..\sdkconfig.defaults = ..\sdkconfig.defaults
+	EndProjectSection
+EndProject
+Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "wolfssl", "wolfssl", "{E0C1A3C6-D2E2-4E10-890C-3468B1B8834C}"
+	ProjectSection(SolutionItems) = preProject
+		..\components\wolfssl\CMakeLists.txt = ..\components\wolfssl\CMakeLists.txt
+		..\components\wolfssl\component.mk = ..\components\wolfssl\component.mk
+		..\..\..\..\..\..\wolfcrypt\src\sha.c = ..\..\..\..\..\..\wolfcrypt\src\sha.c
+		..\..\..\..\..\..\wolfcrypt\src\sha256.c = ..\..\..\..\..\..\wolfcrypt\src\sha256.c
+		..\..\..\..\..\..\wolfcrypt\src\sha3.c = ..\..\..\..\..\..\wolfcrypt\src\sha3.c
+		..\..\..\..\..\..\wolfcrypt\src\sha512.c = ..\..\..\..\..\..\wolfcrypt\src\sha512.c
+	EndProjectSection
+EndProject
+Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "include", "include", "{530960D7-4FAB-4683-9C83-35ADE6C00358}"
+	ProjectSection(SolutionItems) = preProject
+		..\components\wolfssl\include\config.h = ..\components\wolfssl\include\config.h
+		..\components\wolfssl\include\user_settings.h = ..\components\wolfssl\include\user_settings.h
+	EndProjectSection
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|VisualGDB = Debug|VisualGDB
+		Release|VisualGDB = Release|VisualGDB
+		Tests (Debug)|VisualGDB = Tests (Debug)|VisualGDB
+		Tests (Release)|VisualGDB = Tests (Release)|VisualGDB
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}.Debug|VisualGDB.ActiveCfg = Debug|VisualGDB
+		{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}.Debug|VisualGDB.Build.0 = Debug|VisualGDB
+		{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}.Release|VisualGDB.ActiveCfg = Release|VisualGDB
+		{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}.Release|VisualGDB.Build.0 = Release|VisualGDB
+		{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}.Tests (Debug)|VisualGDB.ActiveCfg = Tests (Debug)|VisualGDB
+		{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}.Tests (Debug)|VisualGDB.Build.0 = Tests (Debug)|VisualGDB
+		{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}.Tests (Release)|VisualGDB.ActiveCfg = Tests (Release)|VisualGDB
+		{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}.Tests (Release)|VisualGDB.Build.0 = Tests (Release)|VisualGDB
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+	GlobalSection(NestedProjects) = preSolution
+		{E0C1A3C6-D2E2-4E10-890C-3468B1B8834C} = {51FEFEA9-C2BA-43A1-8B36-9140367E5AAF}
+		{530960D7-4FAB-4683-9C83-35ADE6C00358} = {E0C1A3C6-D2E2-4E10-890C-3468B1B8834C}
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+		SolutionGuid = {668EEFC0-010C-4688-916F-A628190717D4}
+	EndGlobalSection
+EndGlobal

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/VisualGDB/wolfssl_benchmark_IDF_v4.4_ESP32.vgdbproj

@@ -0,0 +1,269 @@
+<?xml version="1.0"?>
+<VisualGDBProjectSettings2 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
+  <Project xsi:type="com.visualgdb.project.external.esp-idf">
+    <CustomSourceDirectories>
+      <Directories />
+      <PathStyle>Unknown</PathStyle>
+    </CustomSourceDirectories>
+    <AutoProgramSPIFFSPartition>true</AutoProgramSPIFFSPartition>
+    <ProjectModeSettings>
+      <ProjectGUID>7bbd1486-d457-4e49-92ba-0cfc9d80849e</ProjectGUID>
+      <GroupSourcesByTypes>true</GroupSourcesByTypes>
+      <GroupSourcesByPaths>true</GroupSourcesByPaths>
+      <HeaderScanMode>SourceDirs</HeaderScanMode>
+    </ProjectModeSettings>
+  </Project>
+  <Build xsi:type="com.visualgdb.build.cmake">
+    <BuildLogMode xsi:nil="true" />
+    <ToolchainID>
+      <ID>com.visualgdb.xtensa-esp32-elf</ID>
+      <Version>
+        <GCC>8.4.0</GCC>
+        <GDB>8.1.0</GDB>
+        <Revision>9</Revision>
+      </Version>
+    </ToolchainID>
+    <RelativeSourceDirectory>..</RelativeSourceDirectory>
+    <ConfigurationType>DEBUG</ConfigurationType>
+    <BinaryDirectory>build/$(PlatformName)/$(ConfigurationName)</BinaryDirectory>
+    <MakeCommandTemplate>
+      <SkipWhenRunningCommandList>false</SkipWhenRunningCommandList>
+      <Command>$(ToolchainNinja)</Command>
+      <WorkingDirectory>$(BuildDir)</WorkingDirectory>
+      <BackgroundMode xsi:nil="true" />
+    </MakeCommandTemplate>
+    <CMakeCommand>
+      <SkipWhenRunningCommandList>false</SkipWhenRunningCommandList>
+      <Command>$(SYSPROGS_CMAKE_PATH)</Command>
+      <BackgroundMode xsi:nil="true" />
+    </CMakeCommand>
+    <UpdateSourcesInCMakeFile>true</UpdateSourcesInCMakeFile>
+    <ExportCompileCommands>false</ExportCompileCommands>
+    <DisableToolchainFile>false</DisableToolchainFile>
+    <CMakeMakefileType>Ninja</CMakeMakefileType>
+    <DeployAsRoot>false</DeployAsRoot>
+    <CMakeCleanMode>RemoveBuildDirectory</CMakeCleanMode>
+    <UseCCache>false</UseCCache>
+    <ProjectModeSettings>
+      <ProjectItemSettings>
+        <GroupSourcesByTypes>true</GroupSourcesByTypes>
+        <GroupSourcesByPaths>true</GroupSourcesByPaths>
+        <GroupTargetsByPaths>true</GroupTargetsByPaths>
+        <FollowCMakeSourceGroups>false</FollowCMakeSourceGroups>
+        <AutoRefreshProject>true</AutoRefreshProject>
+        <AlwaysConsiderOutdated>false</AlwaysConsiderOutdated>
+        <SortTargetsByName>true</SortTargetsByName>
+        <RedundantTargetMode>HideOuterProjectTargets</RedundantTargetMode>
+        <SortSourcesByName>true</SortSourcesByName>
+        <BuildAllTargetsInSubdir>false</BuildAllTargetsInSubdir>
+        <FoldSingleItemPathLevels>true</FoldSingleItemPathLevels>
+      </ProjectItemSettings>
+      <TargetSpecificSettings />
+      <SetLDLibraryPathFromDependentArtifacts>true</SetLDLibraryPathFromDependentArtifacts>
+      <ProjectGUID>eadcc9ab-72b3-4b51-a838-593e5d80ddf7</ProjectGUID>
+      <VirtualFolders />
+      <ConfigurationNameCase>Upper</ConfigurationNameCase>
+      <DefaultHeaderDiscoveryMode>HeaderDirectoryAndSubdirectories</DefaultHeaderDiscoveryMode>
+      <EnableFastUpToDateCheck>true</EnableFastUpToDateCheck>
+      <ESPIDFExtension>
+        <IDFCheckout>
+          <Version>v4.4.1</Version>
+          <Subdirectory>esp-idf/v4.4.1</Subdirectory>
+          <Type>ESPIDF</Type>
+        </IDFCheckout>
+        <COMPort>COM20</COMPort>
+        <SuppressTestPrerequisiteChecks>false</SuppressTestPrerequisiteChecks>
+        <UseCCache>false</UseCCache>
+        <DeviceID>ESP32</DeviceID>
+      </ESPIDFExtension>
+    </ProjectModeSettings>
+  </Build>
+  <CustomBuild>
+    <PreSyncActions />
+    <PreBuildActions />
+    <PostBuildActions />
+    <PreCleanActions />
+    <PostCleanActions />
+  </CustomBuild>
+  <CustomDebug>
+    <PreDebugActions />
+    <PostDebugActions />
+    <DebugStopActions />
+    <BreakMode>Default</BreakMode>
+  </CustomDebug>
+  <DeviceTerminalSettings>
+    <Connection xsi:type="com.sysprogs.terminal.connection.serial">
+      <ComPortName>COM20</ComPortName>
+      <AdvancedSettings>
+        <BaudRate>115200</BaudRate>
+        <DataBits>8</DataBits>
+        <Parity>None</Parity>
+        <StopBits>One</StopBits>
+        <FlowControl>None</FlowControl>
+      </AdvancedSettings>
+    </Connection>
+    <LastConnectionTime>0</LastConnectionTime>
+    <EchoTypedCharacters>false</EchoTypedCharacters>
+    <ClearContentsWhenReconnecting>false</ClearContentsWhenReconnecting>
+    <ReconnectAutomatically>false</ReconnectAutomatically>
+    <DisplayMode>ASCII</DisplayMode>
+    <Colors>
+      <Background>
+        <Alpha>255</Alpha>
+        <Red>0</Red>
+        <Green>0</Green>
+        <Blue>0</Blue>
+      </Background>
+      <Disconnected>
+        <Alpha>255</Alpha>
+        <Red>169</Red>
+        <Green>169</Green>
+        <Blue>169</Blue>
+      </Disconnected>
+      <Text>
+        <Alpha>255</Alpha>
+        <Red>211</Red>
+        <Green>211</Green>
+        <Blue>211</Blue>
+      </Text>
+      <Echo>
+        <Alpha>255</Alpha>
+        <Red>144</Red>
+        <Green>238</Green>
+        <Blue>144</Blue>
+      </Echo>
+      <Inactive>
+        <Alpha>255</Alpha>
+        <Red>169</Red>
+        <Green>169</Green>
+        <Blue>169</Blue>
+      </Inactive>
+    </Colors>
+    <HexSettings>
+      <MaximumBytesPerLine>16</MaximumBytesPerLine>
+      <ShowTextView>true</ShowTextView>
+      <BreaksAroundEcho>true</BreaksAroundEcho>
+      <AutoSend>true</AutoSend>
+      <SendAsHex>true</SendAsHex>
+      <TimeoutForAutoBreak>0</TimeoutForAutoBreak>
+    </HexSettings>
+    <LineEnding>LF</LineEnding>
+    <TreatLFAsCRLF>false</TreatLFAsCRLF>
+    <KeepOpenAfterExit>false</KeepOpenAfterExit>
+    <ShowAfterProgramming>false</ShowAfterProgramming>
+  </DeviceTerminalSettings>
+  <CustomShortcuts>
+    <Shortcuts />
+    <ShowMessageAfterExecuting>true</ShowMessageAfterExecuting>
+  </CustomShortcuts>
+  <UserDefinedVariables />
+  <ImportedPropertySheets />
+  <CodeSense>
+    <Enabled>Unknown</Enabled>
+    <ExtraSettings>
+      <HideErrorsInSystemHeaders>true</HideErrorsInSystemHeaders>
+      <SupportLightweightReferenceAnalysis>true</SupportLightweightReferenceAnalysis>
+      <CheckForClangFormatFiles>true</CheckForClangFormatFiles>
+      <FormattingEngine xsi:nil="true" />
+    </ExtraSettings>
+    <CodeAnalyzerSettings>
+      <Enabled>false</Enabled>
+    </CodeAnalyzerSettings>
+  </CodeSense>
+  <Configurations>
+    <VisualGDBConfiguration>
+      <Name>Debug</Name>
+      <BuildSettingsExtension xsi:type="com.visualgdb.build.external.esp-idf.cmake.extension" />
+    </VisualGDBConfiguration>
+    <VisualGDBConfiguration>
+      <Name>Release</Name>
+      <BuildSettingsExtension xsi:type="com.visualgdb.build.external.esp-idf.cmake.extension" />
+    </VisualGDBConfiguration>
+  </Configurations>
+  <ProgramArgumentsSuggestions />
+  <Debug xsi:type="com.visualgdb.debug.embedded">
+    <AdditionalStartupCommands />
+    <AdditionalGDBSettings>
+      <Features>
+        <DisableAutoDetection>false</DisableAutoDetection>
+        <UseFrameParameter>false</UseFrameParameter>
+        <SimpleValuesFlagSupported>false</SimpleValuesFlagSupported>
+        <ListLocalsSupported>false</ListLocalsSupported>
+        <ByteLevelMemoryCommandsAvailable>false</ByteLevelMemoryCommandsAvailable>
+        <ThreadInfoSupported>false</ThreadInfoSupported>
+        <PendingBreakpointsSupported>false</PendingBreakpointsSupported>
+        <SupportTargetCommand>false</SupportTargetCommand>
+        <ReliableBreakpointNotifications>false</ReliableBreakpointNotifications>
+      </Features>
+      <EnableSmartStepping>false</EnableSmartStepping>
+      <FilterSpuriousStoppedNotifications>false</FilterSpuriousStoppedNotifications>
+      <ForceSingleThreadedMode>false</ForceSingleThreadedMode>
+      <UseAppleExtensions>false</UseAppleExtensions>
+      <CanAcceptCommandsWhileRunning>false</CanAcceptCommandsWhileRunning>
+      <MakeLogFile>false</MakeLogFile>
+      <IgnoreModuleEventsWhileStepping>true</IgnoreModuleEventsWhileStepping>
+      <UseRelativePathsOnly>false</UseRelativePathsOnly>
+      <ExitAction>None</ExitAction>
+      <DisableDisassembly>false</DisableDisassembly>
+      <ExamineMemoryWithXCommand>false</ExamineMemoryWithXCommand>
+      <StepIntoNewInstanceEntry>app_main</StepIntoNewInstanceEntry>
+      <ExamineRegistersInRawFormat>true</ExamineRegistersInRawFormat>
+      <DisableSignals>false</DisableSignals>
+      <EnableAsyncExecutionMode>false</EnableAsyncExecutionMode>
+      <AsyncModeSupportsBreakpoints>true</AsyncModeSupportsBreakpoints>
+      <TemporaryBreakConsolidationTimeout>0</TemporaryBreakConsolidationTimeout>
+      <EnableNonStopMode>false</EnableNonStopMode>
+      <MaxBreakpointLimit>0</MaxBreakpointLimit>
+      <EnableVerboseMode>true</EnableVerboseMode>
+      <EnablePrettyPrinters>false</EnablePrettyPrinters>
+    </AdditionalGDBSettings>
+    <DebugMethod>
+      <ID>openocd</ID>
+      <Configuration xsi:type="com.visualgdb.edp.openocd.settings.esp32">
+        <CommandLine>-f interface/tigard.cfg -c "adapter_khz 15000" -f target/esp32.cfg</CommandLine>
+        <ExtraParameters>
+          <Frequency xsi:nil="true" />
+          <BoostedFrequency xsi:nil="true" />
+          <ConnectUnderReset>false</ConnectUnderReset>
+        </ExtraParameters>
+        <LoadProgressGUIThreshold>131072</LoadProgressGUIThreshold>
+        <ProgramMode>Enabled</ProgramMode>
+        <StartupCommands>
+          <string>set remotetimeout 60</string>
+          <string>target remote :$$SYS:GDB_PORT$$</string>
+          <string>mon gdb_breakpoint_override hard</string>
+          <string>mon reset halt</string>
+          <string>load</string>
+        </StartupCommands>
+        <ProgramFLASHUsingExternalTool>false</ProgramFLASHUsingExternalTool>
+        <PreferredGDBPort>0</PreferredGDBPort>
+        <PreferredTelnetPort>0</PreferredTelnetPort>
+        <AlwaysPassSerialNumber>false</AlwaysPassSerialNumber>
+        <SelectedCoreIndex xsi:nil="true" />
+        <LiveMemoryTimeout>5000</LiveMemoryTimeout>
+        <SuggestionLogicRevision>1</SuggestionLogicRevision>
+        <CheckFLASHSize>true</CheckFLASHSize>
+        <FLASHSettings>
+          <Size>size2MB</Size>
+          <Frequency>freq40M</Frequency>
+          <Mode>DIO</Mode>
+        </FLASHSettings>
+        <PatchBootloader>true</PatchBootloader>
+      </Configuration>
+    </DebugMethod>
+    <AutoDetectRTOS>true</AutoDetectRTOS>
+    <SemihostingSupport>Disabled</SemihostingSupport>
+    <SemihostingPollingDelay>0</SemihostingPollingDelay>
+    <StepIntoEntryPoint>false</StepIntoEntryPoint>
+    <ReloadFirmwareOnReset>false</ReloadFirmwareOnReset>
+    <ValidateEndOfStackAddress>true</ValidateEndOfStackAddress>
+    <StopAtEntryPoint>false</StopAtEntryPoint>
+    <EnableVirtualHalts>false</EnableVirtualHalts>
+    <DynamicAnalysisSettings />
+    <EndOfStackSymbol>_estack</EndOfStackSymbol>
+    <TimestampProviderTicksPerSecond>0</TimestampProviderTicksPerSecond>
+    <KeepConsoleAfterExit>false</KeepConsoleAfterExit>
+    <UnusedStackFillPattern xsi:nil="true" />
+    <CheckInterfaceDrivers>true</CheckInterfaceDrivers>
+  </Debug>
+</VisualGDBProjectSettings2>

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/VisualGDB/wolfssl_benchmark_IDF_v5_ESP32.sln

@@ -0,0 +1,59 @@
+
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio Version 17
+VisualStudioVersion = 17.5.33516.290
+MinimumVisualStudioVersion = 10.0.40219.1
+Project("{803FD0C6-D64E-4E16-9DC3-1DAEC859A3D2}") = "wolfssl_benchmark_IDF_v5_ESP32", "wolfssl_benchmark_IDF_v5_ESP32.vgdbproj", "{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}"
+EndProject
+Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "wolfssl", "wolfssl", "{BDD063E3-67C1-437F-9F9B-7175E36EE6EE}"
+	ProjectSection(SolutionItems) = preProject
+		..\components\wolfssl\CMakeLists.txt = ..\components\wolfssl\CMakeLists.txt
+		..\components\wolfssl\include\config.h = ..\components\wolfssl\include\config.h
+		..\components\wolfssl\Kconfig = ..\components\wolfssl\Kconfig
+		..\components\wolfssl\include\user_settings.h = ..\components\wolfssl\include\user_settings.h
+	EndProjectSection
+EndProject
+Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "Solution Items", "Solution Items", "{E25A35EF-64B9-48AA-939B-49340C2A4B03}"
+	ProjectSection(SolutionItems) = preProject
+		..\sdkconfig = ..\sdkconfig
+		..\build\VisualGDB\Debug\config\sdkconfig.h = ..\build\VisualGDB\Debug\config\sdkconfig.h
+	EndProjectSection
+EndProject
+Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "wolfcrypt", "wolfcrypt", "{68571B42-6509-475F-A79D-FB5F6188753B}"
+	ProjectSection(SolutionItems) = preProject
+		..\..\..\..\..\..\wolfssl\wolfcrypt\port\Espressif\esp32-crypt.h = ..\..\..\..\..\..\wolfssl\wolfcrypt\port\Espressif\esp32-crypt.h
+		..\..\..\..\..\..\wolfcrypt\src\port\Espressif\esp32_aes.c = ..\..\..\..\..\..\wolfcrypt\src\port\Espressif\esp32_aes.c
+		..\..\..\..\..\..\wolfcrypt\src\port\Espressif\esp32_mp.c = ..\..\..\..\..\..\wolfcrypt\src\port\Espressif\esp32_mp.c
+		..\..\..\..\..\..\wolfcrypt\src\port\Espressif\esp32_sha.c = ..\..\..\..\..\..\wolfcrypt\src\port\Espressif\esp32_sha.c
+		..\..\..\..\..\..\wolfcrypt\src\port\Espressif\esp32_util.c = ..\..\..\..\..\..\wolfcrypt\src\port\Espressif\esp32_util.c
+		..\..\..\..\..\..\wolfcrypt\src\port\Espressif\README.md = ..\..\..\..\..\..\wolfcrypt\src\port\Espressif\README.md
+	EndProjectSection
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|VisualGDB = Debug|VisualGDB
+		Release|VisualGDB = Release|VisualGDB
+		Tests (Debug)|VisualGDB = Tests (Debug)|VisualGDB
+		Tests (Release)|VisualGDB = Tests (Release)|VisualGDB
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}.Debug|VisualGDB.ActiveCfg = Debug|VisualGDB
+		{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}.Debug|VisualGDB.Build.0 = Debug|VisualGDB
+		{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}.Release|VisualGDB.ActiveCfg = Release|VisualGDB
+		{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}.Release|VisualGDB.Build.0 = Release|VisualGDB
+		{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}.Tests (Debug)|VisualGDB.ActiveCfg = Tests (Debug)|VisualGDB
+		{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}.Tests (Debug)|VisualGDB.Build.0 = Tests (Debug)|VisualGDB
+		{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}.Tests (Release)|VisualGDB.ActiveCfg = Tests (Release)|VisualGDB
+		{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}.Tests (Release)|VisualGDB.Build.0 = Tests (Release)|VisualGDB
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+	GlobalSection(NestedProjects) = preSolution
+		{BDD063E3-67C1-437F-9F9B-7175E36EE6EE} = {E25A35EF-64B9-48AA-939B-49340C2A4B03}
+		{68571B42-6509-475F-A79D-FB5F6188753B} = {E25A35EF-64B9-48AA-939B-49340C2A4B03}
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+		SolutionGuid = {DED328BF-3A3C-47F4-A536-4554945B865B}
+	EndGlobalSection
+EndGlobal

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/VisualGDB/wolfssl_benchmark_IDF_v5_ESP32.vgdbproj

@@ -0,0 +1,269 @@
+<?xml version="1.0"?>
+<VisualGDBProjectSettings2 xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+  <Project xsi:type="com.visualgdb.project.external.esp-idf">
+    <CustomSourceDirectories>
+      <Directories />
+      <PathStyle>Unknown</PathStyle>
+    </CustomSourceDirectories>
+    <AutoProgramSPIFFSPartition>true</AutoProgramSPIFFSPartition>
+    <ProjectModeSettings>
+      <ProjectGUID>7bbd1486-d457-4e49-92ba-0cfc9d80849e</ProjectGUID>
+      <GroupSourcesByTypes>true</GroupSourcesByTypes>
+      <GroupSourcesByPaths>true</GroupSourcesByPaths>
+      <HeaderScanMode>SourceDirs</HeaderScanMode>
+    </ProjectModeSettings>
+  </Project>
+  <Build xsi:type="com.visualgdb.build.cmake">
+    <BuildLogMode xsi:nil="true" />
+    <ToolchainID>
+      <ID>com.visualgdb.xtensa-esp32-elf</ID>
+      <Version>
+        <GCC>11.2.0</GCC>
+        <GDB>9.2.90</GDB>
+        <Revision>2</Revision>
+      </Version>
+    </ToolchainID>
+    <RelativeSourceDirectory>..</RelativeSourceDirectory>
+    <ConfigurationType>DEBUG</ConfigurationType>
+    <BinaryDirectory>build/$(PlatformName)/$(ConfigurationName)</BinaryDirectory>
+    <MakeCommandTemplate>
+      <SkipWhenRunningCommandList>false</SkipWhenRunningCommandList>
+      <Command>$(ToolchainNinja)</Command>
+      <WorkingDirectory>$(BuildDir)</WorkingDirectory>
+      <BackgroundMode xsi:nil="true" />
+    </MakeCommandTemplate>
+    <CMakeCommand>
+      <SkipWhenRunningCommandList>false</SkipWhenRunningCommandList>
+      <Command>$(SYSPROGS_CMAKE_PATH)</Command>
+      <BackgroundMode xsi:nil="true" />
+    </CMakeCommand>
+    <UpdateSourcesInCMakeFile>true</UpdateSourcesInCMakeFile>
+    <ExportCompileCommands>false</ExportCompileCommands>
+    <DisableToolchainFile>false</DisableToolchainFile>
+    <CMakeMakefileType>Ninja</CMakeMakefileType>
+    <DeployAsRoot>false</DeployAsRoot>
+    <CMakeCleanMode>RemoveBuildDirectory</CMakeCleanMode>
+    <UseCCache>false</UseCCache>
+    <ProjectModeSettings>
+      <ProjectItemSettings>
+        <GroupSourcesByTypes>true</GroupSourcesByTypes>
+        <GroupSourcesByPaths>true</GroupSourcesByPaths>
+        <GroupTargetsByPaths>true</GroupTargetsByPaths>
+        <FollowCMakeSourceGroups>false</FollowCMakeSourceGroups>
+        <AutoRefreshProject>true</AutoRefreshProject>
+        <AlwaysConsiderOutdated>false</AlwaysConsiderOutdated>
+        <SortTargetsByName>true</SortTargetsByName>
+        <RedundantTargetMode>HideOuterProjectTargets</RedundantTargetMode>
+        <SortSourcesByName>true</SortSourcesByName>
+        <BuildAllTargetsInSubdir>false</BuildAllTargetsInSubdir>
+        <FoldSingleItemPathLevels>true</FoldSingleItemPathLevels>
+      </ProjectItemSettings>
+      <TargetSpecificSettings />
+      <SetLDLibraryPathFromDependentArtifacts>true</SetLDLibraryPathFromDependentArtifacts>
+      <ProjectGUID>eadcc9ab-72b3-4b51-a838-593e5d80ddf7</ProjectGUID>
+      <VirtualFolders />
+      <ConfigurationNameCase>Upper</ConfigurationNameCase>
+      <DefaultHeaderDiscoveryMode>HeaderDirectoryAndSubdirectories</DefaultHeaderDiscoveryMode>
+      <EnableFastUpToDateCheck>true</EnableFastUpToDateCheck>
+      <ESPIDFExtension>
+        <IDFCheckout>
+          <Version>release/v5.0</Version>
+          <Subdirectory>esp-idf/v5.0</Subdirectory>
+          <Type>ESPIDF</Type>
+        </IDFCheckout>
+        <COMPort>COM20</COMPort>
+        <SuppressTestPrerequisiteChecks>false</SuppressTestPrerequisiteChecks>
+        <UseCCache>false</UseCCache>
+        <DeviceID>ESP32</DeviceID>
+      </ESPIDFExtension>
+    </ProjectModeSettings>
+  </Build>
+  <CustomBuild>
+    <PreSyncActions />
+    <PreBuildActions />
+    <PostBuildActions />
+    <PreCleanActions />
+    <PostCleanActions />
+  </CustomBuild>
+  <CustomDebug>
+    <PreDebugActions />
+    <PostDebugActions />
+    <DebugStopActions />
+    <BreakMode>Default</BreakMode>
+  </CustomDebug>
+  <DeviceTerminalSettings>
+    <Connection xsi:type="com.sysprogs.terminal.connection.serial">
+      <ComPortName>COM9</ComPortName>
+      <AdvancedSettings>
+        <BaudRate>115200</BaudRate>
+        <DataBits>8</DataBits>
+        <Parity>None</Parity>
+        <StopBits>One</StopBits>
+        <FlowControl>None</FlowControl>
+      </AdvancedSettings>
+    </Connection>
+    <LastConnectionTime>0</LastConnectionTime>
+    <EchoTypedCharacters>false</EchoTypedCharacters>
+    <ClearContentsWhenReconnecting>false</ClearContentsWhenReconnecting>
+    <ReconnectAutomatically>false</ReconnectAutomatically>
+    <DisplayMode>ASCII</DisplayMode>
+    <Colors>
+      <Background>
+        <Alpha>255</Alpha>
+        <Red>0</Red>
+        <Green>0</Green>
+        <Blue>0</Blue>
+      </Background>
+      <Disconnected>
+        <Alpha>255</Alpha>
+        <Red>169</Red>
+        <Green>169</Green>
+        <Blue>169</Blue>
+      </Disconnected>
+      <Text>
+        <Alpha>255</Alpha>
+        <Red>211</Red>
+        <Green>211</Green>
+        <Blue>211</Blue>
+      </Text>
+      <Echo>
+        <Alpha>255</Alpha>
+        <Red>144</Red>
+        <Green>238</Green>
+        <Blue>144</Blue>
+      </Echo>
+      <Inactive>
+        <Alpha>255</Alpha>
+        <Red>169</Red>
+        <Green>169</Green>
+        <Blue>169</Blue>
+      </Inactive>
+    </Colors>
+    <HexSettings>
+      <MaximumBytesPerLine>16</MaximumBytesPerLine>
+      <ShowTextView>true</ShowTextView>
+      <BreaksAroundEcho>true</BreaksAroundEcho>
+      <AutoSend>true</AutoSend>
+      <SendAsHex>true</SendAsHex>
+      <TimeoutForAutoBreak>0</TimeoutForAutoBreak>
+    </HexSettings>
+    <LineEnding>LF</LineEnding>
+    <TreatLFAsCRLF>false</TreatLFAsCRLF>
+    <KeepOpenAfterExit>false</KeepOpenAfterExit>
+    <ShowAfterProgramming>false</ShowAfterProgramming>
+  </DeviceTerminalSettings>
+  <CustomShortcuts>
+    <Shortcuts />
+    <ShowMessageAfterExecuting>true</ShowMessageAfterExecuting>
+  </CustomShortcuts>
+  <UserDefinedVariables />
+  <ImportedPropertySheets />
+  <CodeSense>
+    <Enabled>Unknown</Enabled>
+    <ExtraSettings>
+      <HideErrorsInSystemHeaders>true</HideErrorsInSystemHeaders>
+      <SupportLightweightReferenceAnalysis>true</SupportLightweightReferenceAnalysis>
+      <CheckForClangFormatFiles>true</CheckForClangFormatFiles>
+      <FormattingEngine xsi:nil="true" />
+    </ExtraSettings>
+    <CodeAnalyzerSettings>
+      <Enabled>false</Enabled>
+    </CodeAnalyzerSettings>
+  </CodeSense>
+  <Configurations>
+    <VisualGDBConfiguration>
+      <Name>Debug</Name>
+      <BuildSettingsExtension xsi:type="com.visualgdb.build.external.esp-idf.cmake.extension" />
+    </VisualGDBConfiguration>
+    <VisualGDBConfiguration>
+      <Name>Release</Name>
+      <BuildSettingsExtension xsi:type="com.visualgdb.build.external.esp-idf.cmake.extension" />
+    </VisualGDBConfiguration>
+  </Configurations>
+  <ProgramArgumentsSuggestions />
+  <Debug xsi:type="com.visualgdb.debug.embedded">
+    <AdditionalStartupCommands />
+    <AdditionalGDBSettings>
+      <Features>
+        <DisableAutoDetection>false</DisableAutoDetection>
+        <UseFrameParameter>false</UseFrameParameter>
+        <SimpleValuesFlagSupported>false</SimpleValuesFlagSupported>
+        <ListLocalsSupported>false</ListLocalsSupported>
+        <ByteLevelMemoryCommandsAvailable>false</ByteLevelMemoryCommandsAvailable>
+        <ThreadInfoSupported>false</ThreadInfoSupported>
+        <PendingBreakpointsSupported>false</PendingBreakpointsSupported>
+        <SupportTargetCommand>false</SupportTargetCommand>
+        <ReliableBreakpointNotifications>false</ReliableBreakpointNotifications>
+      </Features>
+      <EnableSmartStepping>false</EnableSmartStepping>
+      <FilterSpuriousStoppedNotifications>false</FilterSpuriousStoppedNotifications>
+      <ForceSingleThreadedMode>false</ForceSingleThreadedMode>
+      <UseAppleExtensions>false</UseAppleExtensions>
+      <CanAcceptCommandsWhileRunning>false</CanAcceptCommandsWhileRunning>
+      <MakeLogFile>false</MakeLogFile>
+      <IgnoreModuleEventsWhileStepping>true</IgnoreModuleEventsWhileStepping>
+      <UseRelativePathsOnly>false</UseRelativePathsOnly>
+      <ExitAction>None</ExitAction>
+      <DisableDisassembly>false</DisableDisassembly>
+      <ExamineMemoryWithXCommand>false</ExamineMemoryWithXCommand>
+      <StepIntoNewInstanceEntry>app_main</StepIntoNewInstanceEntry>
+      <ExamineRegistersInRawFormat>true</ExamineRegistersInRawFormat>
+      <DisableSignals>false</DisableSignals>
+      <EnableAsyncExecutionMode>false</EnableAsyncExecutionMode>
+      <AsyncModeSupportsBreakpoints>true</AsyncModeSupportsBreakpoints>
+      <TemporaryBreakConsolidationTimeout>0</TemporaryBreakConsolidationTimeout>
+      <EnableNonStopMode>false</EnableNonStopMode>
+      <MaxBreakpointLimit>0</MaxBreakpointLimit>
+      <EnableVerboseMode>true</EnableVerboseMode>
+      <EnablePrettyPrinters>false</EnablePrettyPrinters>
+    </AdditionalGDBSettings>
+    <DebugMethod>
+      <ID>openocd</ID>
+      <Configuration xsi:type="com.visualgdb.edp.openocd.settings.esp32">
+        <CommandLine>-f interface/ftdi/tigard.cfg -c "adapter_khz 15000" -f target/esp32.cfg</CommandLine>
+        <ExtraParameters>
+          <Frequency xsi:nil="true" />
+          <BoostedFrequency xsi:nil="true" />
+          <ConnectUnderReset>false</ConnectUnderReset>
+        </ExtraParameters>
+        <LoadProgressGUIThreshold>131072</LoadProgressGUIThreshold>
+        <ProgramMode>Enabled</ProgramMode>
+        <StartupCommands>
+          <string>set remotetimeout 60</string>
+          <string>target remote :$$SYS:GDB_PORT$$</string>
+          <string>mon gdb_breakpoint_override hard</string>
+          <string>mon reset halt</string>
+          <string>load</string>
+        </StartupCommands>
+        <ProgramFLASHUsingExternalTool>false</ProgramFLASHUsingExternalTool>
+        <PreferredGDBPort>0</PreferredGDBPort>
+        <PreferredTelnetPort>0</PreferredTelnetPort>
+        <AlwaysPassSerialNumber>false</AlwaysPassSerialNumber>
+        <SelectedCoreIndex xsi:nil="true" />
+        <LiveMemoryTimeout>5000</LiveMemoryTimeout>
+        <SuggestionLogicRevision>1</SuggestionLogicRevision>
+        <CheckFLASHSize>true</CheckFLASHSize>
+        <FLASHSettings>
+          <Size>size2MB</Size>
+          <Frequency>freq40M</Frequency>
+          <Mode>DIO</Mode>
+        </FLASHSettings>
+        <PatchBootloader>true</PatchBootloader>
+      </Configuration>
+    </DebugMethod>
+    <AutoDetectRTOS>true</AutoDetectRTOS>
+    <SemihostingSupport>Disabled</SemihostingSupport>
+    <SemihostingPollingDelay>0</SemihostingPollingDelay>
+    <StepIntoEntryPoint>false</StepIntoEntryPoint>
+    <ReloadFirmwareOnReset>false</ReloadFirmwareOnReset>
+    <ValidateEndOfStackAddress>true</ValidateEndOfStackAddress>
+    <StopAtEntryPoint>false</StopAtEntryPoint>
+    <EnableVirtualHalts>false</EnableVirtualHalts>
+    <DynamicAnalysisSettings />
+    <EndOfStackSymbol>_estack</EndOfStackSymbol>
+    <TimestampProviderTicksPerSecond>0</TimestampProviderTicksPerSecond>
+    <KeepConsoleAfterExit>false</KeepConsoleAfterExit>
+    <UnusedStackFillPattern xsi:nil="true" />
+    <CheckInterfaceDrivers>true</CheckInterfaceDrivers>
+  </Debug>
+</VisualGDBProjectSettings2>

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/VisualGDB/wolfssl_benchmark_IDF_v5_ESP32C3.sln

@@ -0,0 +1,63 @@
+
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio Version 16
+VisualStudioVersion = 16.0.33027.164
+MinimumVisualStudioVersion = 10.0.40219.1
+Project("{803FD0C6-D64E-4E16-9DC3-1DAEC859A3D2}") = "wolfssl_benchmark_IDF_v5_ESP32C3", "wolfssl_benchmark_IDF_v5_ESP32C3.vgdbproj", "{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}"
+EndProject
+Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "Solution Items", "Solution Items", "{68202294-86F7-471F-BBBF-47F6B3E3137C}"
+	ProjectSection(SolutionItems) = preProject
+		..\..\..\..\..\..\wolfcrypt\benchmark\benchmark.c = ..\..\..\..\..\..\wolfcrypt\benchmark\benchmark.c
+		..\..\..\..\..\..\wolfcrypt\benchmark\benchmark.h = ..\..\..\..\..\..\wolfcrypt\benchmark\benchmark.h
+		..\components\wolfssl\include\config.h = ..\components\wolfssl\include\config.h
+		..\components\wolfssl\include\user_settings.h = ..\components\wolfssl\include\user_settings.h
+	EndProjectSection
+EndProject
+Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "wolfcrypt", "wolfcrypt", "{35897992-1F28-4AB1-B432-7F7D76D61162}"
+	ProjectSection(SolutionItems) = preProject
+		..\..\..\..\..\..\wolfcrypt\src\sha.c = ..\..\..\..\..\..\wolfcrypt\src\sha.c
+		..\..\..\..\..\..\wolfssl\openssl\sha.h = ..\..\..\..\..\..\wolfssl\openssl\sha.h
+		..\..\..\..\..\..\wolfssl\wolfcrypt\sha.h = ..\..\..\..\..\..\wolfssl\wolfcrypt\sha.h
+		..\..\..\..\..\..\wolfcrypt\src\sha256.c = ..\..\..\..\..\..\wolfcrypt\src\sha256.c
+		..\..\..\..\..\..\wolfssl\wolfcrypt\sha256.h = ..\..\..\..\..\..\wolfssl\wolfcrypt\sha256.h
+		..\..\..\..\..\..\wolfcrypt\src\sha512.c = ..\..\..\..\..\..\wolfcrypt\src\sha512.c
+		..\..\..\..\..\..\wolfssl\wolfcrypt\sha512.h = ..\..\..\..\..\..\wolfssl\wolfcrypt\sha512.h
+	EndProjectSection
+EndProject
+Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "Espressif Port", "Espressif Port", "{66DEEB01-9378-4714-9EF7-23A0CA65A996}"
+	ProjectSection(SolutionItems) = preProject
+		..\..\..\..\..\..\wolfssl\wolfcrypt\port\Espressif\esp32-crypt.h = ..\..\..\..\..\..\wolfssl\wolfcrypt\port\Espressif\esp32-crypt.h
+		..\..\..\..\..\..\wolfcrypt\src\port\Espressif\esp32_sha.c = ..\..\..\..\..\..\wolfcrypt\src\port\Espressif\esp32_sha.c
+	EndProjectSection
+EndProject
+Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "config", "config", "{3BA29EA8-68C5-4144-B471-33BA380C323E}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|VisualGDB = Debug|VisualGDB
+		Release|VisualGDB = Release|VisualGDB
+		Tests (Debug)|VisualGDB = Tests (Debug)|VisualGDB
+		Tests (Release)|VisualGDB = Tests (Release)|VisualGDB
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}.Debug|VisualGDB.ActiveCfg = Debug|VisualGDB
+		{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}.Debug|VisualGDB.Build.0 = Debug|VisualGDB
+		{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}.Release|VisualGDB.ActiveCfg = Release|VisualGDB
+		{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}.Release|VisualGDB.Build.0 = Release|VisualGDB
+		{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}.Tests (Debug)|VisualGDB.ActiveCfg = Tests (Debug)|VisualGDB
+		{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}.Tests (Debug)|VisualGDB.Build.0 = Tests (Debug)|VisualGDB
+		{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}.Tests (Release)|VisualGDB.ActiveCfg = Tests (Release)|VisualGDB
+		{EADCC9AB-72B3-4B51-A838-593E5D80DDF7}.Tests (Release)|VisualGDB.Build.0 = Tests (Release)|VisualGDB
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+	GlobalSection(NestedProjects) = preSolution
+		{35897992-1F28-4AB1-B432-7F7D76D61162} = {68202294-86F7-471F-BBBF-47F6B3E3137C}
+		{66DEEB01-9378-4714-9EF7-23A0CA65A996} = {68202294-86F7-471F-BBBF-47F6B3E3137C}
+		{3BA29EA8-68C5-4144-B471-33BA380C323E} = {68202294-86F7-471F-BBBF-47F6B3E3137C}
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+		SolutionGuid = {8F3E87F6-73E7-446B-A5B7-ADB94756C9D4}
+	EndGlobalSection
+EndGlobal

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/VisualGDB/wolfssl_benchmark_IDF_v5_ESP32C3.vgdbproj

@@ -0,0 +1,271 @@
+<?xml version="1.0"?>
+<VisualGDBProjectSettings2 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
+  <Project xsi:type="com.visualgdb.project.external.esp-idf">
+    <CustomSourceDirectories>
+      <Directories />
+      <PathStyle>Unknown</PathStyle>
+    </CustomSourceDirectories>
+    <AutoProgramSPIFFSPartition>true</AutoProgramSPIFFSPartition>
+    <ProjectModeSettings>
+      <ProjectGUID>7bbd1486-d457-4e49-92ba-0cfc9d80849e</ProjectGUID>
+      <GroupSourcesByTypes>true</GroupSourcesByTypes>
+      <GroupSourcesByPaths>true</GroupSourcesByPaths>
+      <HeaderScanMode>SourceDirs</HeaderScanMode>
+    </ProjectModeSettings>
+  </Project>
+  <Build xsi:type="com.visualgdb.build.cmake">
+    <BuildLogMode xsi:nil="true" />
+    <ToolchainID>
+      <ID>com.visualgdb.xtensa-esp32-elf</ID>
+      <Version>
+        <GCC>11.2.0</GCC>
+        <GDB>9.2.90</GDB>
+        <Revision>2</Revision>
+      </Version>
+    </ToolchainID>
+    <RelativeSourceDirectory>..</RelativeSourceDirectory>
+    <ConfigurationType>DEBUG</ConfigurationType>
+    <BinaryDirectory>build/$(PlatformName)/$(ConfigurationName)</BinaryDirectory>
+    <MakeCommandTemplate>
+      <SkipWhenRunningCommandList>false</SkipWhenRunningCommandList>
+      <Command>$(ToolchainNinja)</Command>
+      <WorkingDirectory>$(BuildDir)</WorkingDirectory>
+      <BackgroundMode xsi:nil="true" />
+    </MakeCommandTemplate>
+    <CMakeCommand>
+      <SkipWhenRunningCommandList>false</SkipWhenRunningCommandList>
+      <Command>$(SYSPROGS_CMAKE_PATH)</Command>
+      <BackgroundMode xsi:nil="true" />
+    </CMakeCommand>
+    <UpdateSourcesInCMakeFile>true</UpdateSourcesInCMakeFile>
+    <ExportCompileCommands>false</ExportCompileCommands>
+    <DisableToolchainFile>false</DisableToolchainFile>
+    <CMakeMakefileType>Ninja</CMakeMakefileType>
+    <DeployAsRoot>false</DeployAsRoot>
+    <CMakeCleanMode>RemoveBuildDirectory</CMakeCleanMode>
+    <UseCCache>false</UseCCache>
+    <ProjectModeSettings>
+      <ProjectItemSettings>
+        <GroupSourcesByTypes>true</GroupSourcesByTypes>
+        <GroupSourcesByPaths>true</GroupSourcesByPaths>
+        <GroupTargetsByPaths>true</GroupTargetsByPaths>
+        <FollowCMakeSourceGroups>false</FollowCMakeSourceGroups>
+        <AutoRefreshProject>true</AutoRefreshProject>
+        <AlwaysConsiderOutdated>false</AlwaysConsiderOutdated>
+        <SortTargetsByName>true</SortTargetsByName>
+        <RedundantTargetMode>HideOuterProjectTargets</RedundantTargetMode>
+        <SortSourcesByName>true</SortSourcesByName>
+        <BuildAllTargetsInSubdir>false</BuildAllTargetsInSubdir>
+        <FoldSingleItemPathLevels>true</FoldSingleItemPathLevels>
+      </ProjectItemSettings>
+      <TargetSpecificSettings />
+      <SetLDLibraryPathFromDependentArtifacts>true</SetLDLibraryPathFromDependentArtifacts>
+      <ProjectGUID>eadcc9ab-72b3-4b51-a838-593e5d80ddf7</ProjectGUID>
+      <VirtualFolders />
+      <ConfigurationNameCase>Upper</ConfigurationNameCase>
+      <DefaultHeaderDiscoveryMode>HeaderDirectoryAndSubdirectories</DefaultHeaderDiscoveryMode>
+      <EnableFastUpToDateCheck>true</EnableFastUpToDateCheck>
+      <ESPIDFExtension>
+        <IDFCheckout>
+          <Version>release/v5.0</Version>
+          <Subdirectory>esp-idf/v5.0</Subdirectory>
+          <Type>ESPIDF</Type>
+        </IDFCheckout>
+        <COMPort>COM23</COMPort>
+        <SuppressTestPrerequisiteChecks>false</SuppressTestPrerequisiteChecks>
+        <UseCCache>false</UseCCache>
+        <DeviceID>ESP32C3</DeviceID>
+      </ESPIDFExtension>
+    </ProjectModeSettings>
+  </Build>
+  <CustomBuild>
+    <PreSyncActions />
+    <PreBuildActions />
+    <PostBuildActions />
+    <PreCleanActions />
+    <PostCleanActions />
+  </CustomBuild>
+  <CustomDebug>
+    <PreDebugActions />
+    <PostDebugActions />
+    <DebugStopActions />
+    <BreakMode>Default</BreakMode>
+  </CustomDebug>
+  <DeviceTerminalSettings>
+    <Connection xsi:type="com.sysprogs.terminal.connection.serial">
+      <ComPortName>COM24</ComPortName>
+      <AdvancedSettings>
+        <BaudRate>115200</BaudRate>
+        <DataBits>8</DataBits>
+        <Parity>None</Parity>
+        <StopBits>One</StopBits>
+        <FlowControl>None</FlowControl>
+      </AdvancedSettings>
+    </Connection>
+    <LastConnectionTime>0</LastConnectionTime>
+    <EchoTypedCharacters>false</EchoTypedCharacters>
+    <ClearContentsWhenReconnecting>false</ClearContentsWhenReconnecting>
+    <ReconnectAutomatically>false</ReconnectAutomatically>
+    <DisplayMode>ASCII</DisplayMode>
+    <Colors>
+      <Background>
+        <Alpha>255</Alpha>
+        <Red>0</Red>
+        <Green>0</Green>
+        <Blue>0</Blue>
+      </Background>
+      <Disconnected>
+        <Alpha>255</Alpha>
+        <Red>169</Red>
+        <Green>169</Green>
+        <Blue>169</Blue>
+      </Disconnected>
+      <Text>
+        <Alpha>255</Alpha>
+        <Red>211</Red>
+        <Green>211</Green>
+        <Blue>211</Blue>
+      </Text>
+      <Echo>
+        <Alpha>255</Alpha>
+        <Red>144</Red>
+        <Green>238</Green>
+        <Blue>144</Blue>
+      </Echo>
+      <Inactive>
+        <Alpha>255</Alpha>
+        <Red>169</Red>
+        <Green>169</Green>
+        <Blue>169</Blue>
+      </Inactive>
+    </Colors>
+    <HexSettings>
+      <MaximumBytesPerLine>16</MaximumBytesPerLine>
+      <ShowTextView>true</ShowTextView>
+      <BreaksAroundEcho>true</BreaksAroundEcho>
+      <AutoSend>true</AutoSend>
+      <SendAsHex>true</SendAsHex>
+      <TimeoutForAutoBreak>0</TimeoutForAutoBreak>
+    </HexSettings>
+    <LineEnding>LF</LineEnding>
+    <TreatLFAsCRLF>false</TreatLFAsCRLF>
+    <KeepOpenAfterExit>false</KeepOpenAfterExit>
+    <ShowAfterProgramming>false</ShowAfterProgramming>
+  </DeviceTerminalSettings>
+  <CustomShortcuts>
+    <Shortcuts />
+    <ShowMessageAfterExecuting>true</ShowMessageAfterExecuting>
+  </CustomShortcuts>
+  <UserDefinedVariables />
+  <ImportedPropertySheets />
+  <CodeSense>
+    <Enabled>Unknown</Enabled>
+    <ExtraSettings>
+      <HideErrorsInSystemHeaders>true</HideErrorsInSystemHeaders>
+      <SupportLightweightReferenceAnalysis>true</SupportLightweightReferenceAnalysis>
+      <CheckForClangFormatFiles>true</CheckForClangFormatFiles>
+      <FormattingEngine xsi:nil="true" />
+    </ExtraSettings>
+    <CodeAnalyzerSettings>
+      <Enabled>false</Enabled>
+    </CodeAnalyzerSettings>
+  </CodeSense>
+  <Configurations>
+    <VisualGDBConfiguration>
+      <Name>Debug</Name>
+      <BuildSettingsExtension xsi:type="com.visualgdb.build.external.esp-idf.cmake.extension" />
+    </VisualGDBConfiguration>
+    <VisualGDBConfiguration>
+      <Name>Release</Name>
+      <BuildSettingsExtension xsi:type="com.visualgdb.build.external.esp-idf.cmake.extension" />
+    </VisualGDBConfiguration>
+  </Configurations>
+  <ProgramArgumentsSuggestions />
+  <Debug xsi:type="com.visualgdb.debug.embedded">
+    <AdditionalStartupCommands />
+    <AdditionalGDBSettings>
+      <Features>
+        <DisableAutoDetection>false</DisableAutoDetection>
+        <UseFrameParameter>true</UseFrameParameter>
+        <SimpleValuesFlagSupported>true</SimpleValuesFlagSupported>
+        <ListLocalsSupported>true</ListLocalsSupported>
+        <ByteLevelMemoryCommandsAvailable>true</ByteLevelMemoryCommandsAvailable>
+        <ThreadInfoSupported>true</ThreadInfoSupported>
+        <PendingBreakpointsSupported>true</PendingBreakpointsSupported>
+        <SupportTargetCommand>true</SupportTargetCommand>
+        <ReliableBreakpointNotifications>true</ReliableBreakpointNotifications>
+      </Features>
+      <EnableSmartStepping>false</EnableSmartStepping>
+      <FilterSpuriousStoppedNotifications>false</FilterSpuriousStoppedNotifications>
+      <ForceSingleThreadedMode>false</ForceSingleThreadedMode>
+      <UseAppleExtensions>false</UseAppleExtensions>
+      <CanAcceptCommandsWhileRunning>false</CanAcceptCommandsWhileRunning>
+      <MakeLogFile>false</MakeLogFile>
+      <IgnoreModuleEventsWhileStepping>true</IgnoreModuleEventsWhileStepping>
+      <UseRelativePathsOnly>false</UseRelativePathsOnly>
+      <ExitAction>Disconnect</ExitAction>
+      <DisableDisassembly>false</DisableDisassembly>
+      <ExamineMemoryWithXCommand>false</ExamineMemoryWithXCommand>
+      <StepIntoNewInstanceEntry>app_main</StepIntoNewInstanceEntry>
+      <ExamineRegistersInRawFormat>true</ExamineRegistersInRawFormat>
+      <DisableSignals>false</DisableSignals>
+      <EnableAsyncExecutionMode>false</EnableAsyncExecutionMode>
+      <AsyncModeSupportsBreakpoints>true</AsyncModeSupportsBreakpoints>
+      <TemporaryBreakConsolidationTimeout>0</TemporaryBreakConsolidationTimeout>
+      <EnableNonStopMode>false</EnableNonStopMode>
+      <MaxBreakpointLimit>0</MaxBreakpointLimit>
+      <EnableVerboseMode>true</EnableVerboseMode>
+      <EnablePrettyPrinters>false</EnablePrettyPrinters>
+    </AdditionalGDBSettings>
+    <DebugMethod>
+      <ID>openocd</ID>
+      <InterfaceID>esp_usb_jtag</InterfaceID>
+      <InterfaceSerialNumber>60:55:F9:BC:29:94</InterfaceSerialNumber>
+      <Configuration xsi:type="com.visualgdb.edp.openocd.settings.esp32">
+        <CommandLine>-f interface/esp_usb_jtag.cfg -c "adapter_khz 3000" -f target/esp32c3.cfg</CommandLine>
+        <ExtraParameters>
+          <Frequency xsi:nil="true" />
+          <BoostedFrequency xsi:nil="true" />
+          <ConnectUnderReset>false</ConnectUnderReset>
+        </ExtraParameters>
+        <LoadProgressGUIThreshold>131072</LoadProgressGUIThreshold>
+        <ProgramMode>Enabled</ProgramMode>
+        <StartupCommands>
+          <string>set remotetimeout 60</string>
+          <string>target remote :$$SYS:GDB_PORT$$</string>
+          <string>mon gdb_breakpoint_override hard</string>
+          <string>mon reset halt</string>
+          <string>load</string>
+        </StartupCommands>
+        <ProgramFLASHUsingExternalTool>false</ProgramFLASHUsingExternalTool>
+        <PreferredGDBPort>0</PreferredGDBPort>
+        <PreferredTelnetPort>0</PreferredTelnetPort>
+        <AlwaysPassSerialNumber>false</AlwaysPassSerialNumber>
+        <SelectedCoreIndex xsi:nil="true" />
+        <LiveMemoryTimeout>5000</LiveMemoryTimeout>
+        <SuggestionLogicRevision>1</SuggestionLogicRevision>
+        <CheckFLASHSize>true</CheckFLASHSize>
+        <FLASHSettings>
+          <Size>size2MB</Size>
+          <Frequency>freq40M</Frequency>
+          <Mode>DIO</Mode>
+        </FLASHSettings>
+        <PatchBootloader>true</PatchBootloader>
+      </Configuration>
+    </DebugMethod>
+    <AutoDetectRTOS>true</AutoDetectRTOS>
+    <SemihostingSupport>Disabled</SemihostingSupport>
+    <SemihostingPollingDelay>0</SemihostingPollingDelay>
+    <StepIntoEntryPoint>false</StepIntoEntryPoint>
+    <ReloadFirmwareOnReset>false</ReloadFirmwareOnReset>
+    <ValidateEndOfStackAddress>true</ValidateEndOfStackAddress>
+    <StopAtEntryPoint>false</StopAtEntryPoint>
+    <EnableVirtualHalts>false</EnableVirtualHalts>
+    <DynamicAnalysisSettings />
+    <EndOfStackSymbol>_estack</EndOfStackSymbol>
+    <TimestampProviderTicksPerSecond>0</TimestampProviderTicksPerSecond>
+    <KeepConsoleAfterExit>false</KeepConsoleAfterExit>
+    <UnusedStackFillPattern xsi:nil="true" />
+    <CheckInterfaceDrivers>true</CheckInterfaceDrivers>
+  </Debug>
+</VisualGDBProjectSettings2>

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/VisualGDB/wolfssl_benchmark_IDF_v5_ESP32S3.sln

@@ -0,0 +1,54 @@
+
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio Version 16
+VisualStudioVersion = 16.0.33027.164
+MinimumVisualStudioVersion = 10.0.40219.1
+Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "Solution Items", "Solution Items", "{CD9E73EC-27FB-49E4-B3A3-B0502C20A818}"
+EndProject
+Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "wolfSSL", "wolfSSL", "{20662F9E-D386-4839-B855-857D7F922C99}"
+	ProjectSection(SolutionItems) = preProject
+		..\components\wolfssl\CMakeLists.txt = ..\components\wolfssl\CMakeLists.txt
+	EndProjectSection
+EndProject
+Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "include", "include", "{89279333-68BD-4E6A-B970-E645967CE5FA}"
+	ProjectSection(SolutionItems) = preProject
+		..\components\wolfssl\include\config.h = ..\components\wolfssl\include\config.h
+		..\components\wolfssl\include\user_settings.h = ..\components\wolfssl\include\user_settings.h
+	EndProjectSection
+EndProject
+Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "lib", "lib", "{E9586E44-7821-4956-9F72-A79B988B3211}"
+	ProjectSection(SolutionItems) = preProject
+		..\..\..\user_settings.h = ..\..\..\user_settings.h
+	EndProjectSection
+EndProject
+Project("{803FD0C6-D64E-4E16-9DC3-1DAEC859A3D2}") = "wolfssl_benchmark_IDF_v5_ESP32S3", "wolfssl_benchmark_IDF_v5_ESP32S3.vgdbproj", "{870D7357-61DA-432A-806F-041A23BC8532}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|VisualGDB = Debug|VisualGDB
+		Release|VisualGDB = Release|VisualGDB
+		Tests (Debug)|VisualGDB = Tests (Debug)|VisualGDB
+		Tests (Release)|VisualGDB = Tests (Release)|VisualGDB
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{870D7357-61DA-432A-806F-041A23BC8532}.Debug|VisualGDB.ActiveCfg = Debug|VisualGDB
+		{870D7357-61DA-432A-806F-041A23BC8532}.Debug|VisualGDB.Build.0 = Debug|VisualGDB
+		{870D7357-61DA-432A-806F-041A23BC8532}.Release|VisualGDB.ActiveCfg = Release|VisualGDB
+		{870D7357-61DA-432A-806F-041A23BC8532}.Release|VisualGDB.Build.0 = Release|VisualGDB
+		{870D7357-61DA-432A-806F-041A23BC8532}.Tests (Debug)|VisualGDB.ActiveCfg = Tests (Debug)|VisualGDB
+		{870D7357-61DA-432A-806F-041A23BC8532}.Tests (Debug)|VisualGDB.Build.0 = Tests (Debug)|VisualGDB
+		{870D7357-61DA-432A-806F-041A23BC8532}.Tests (Release)|VisualGDB.ActiveCfg = Tests (Release)|VisualGDB
+		{870D7357-61DA-432A-806F-041A23BC8532}.Tests (Release)|VisualGDB.Build.0 = Tests (Release)|VisualGDB
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+	GlobalSection(NestedProjects) = preSolution
+		{20662F9E-D386-4839-B855-857D7F922C99} = {CD9E73EC-27FB-49E4-B3A3-B0502C20A818}
+		{89279333-68BD-4E6A-B970-E645967CE5FA} = {20662F9E-D386-4839-B855-857D7F922C99}
+		{E9586E44-7821-4956-9F72-A79B988B3211} = {CD9E73EC-27FB-49E4-B3A3-B0502C20A818}
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+		SolutionGuid = {7F8E1DC0-55AD-4DF8-B65A-CD65B60E17F9}
+	EndGlobalSection
+EndGlobal

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/VisualGDB/wolfssl_benchmark_IDF_v5_ESP32S3.vgdbproj

@@ -0,0 +1,271 @@
+<?xml version="1.0"?>
+<VisualGDBProjectSettings2 xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+  <Project xsi:type="com.visualgdb.project.external.esp-idf">
+    <CustomSourceDirectories>
+      <Directories />
+      <PathStyle>Unknown</PathStyle>
+    </CustomSourceDirectories>
+    <AutoProgramSPIFFSPartition>true</AutoProgramSPIFFSPartition>
+    <ProjectModeSettings>
+      <ProjectGUID>35e5525f-318a-466e-a8c7-36548547d801</ProjectGUID>
+      <GroupSourcesByTypes>true</GroupSourcesByTypes>
+      <GroupSourcesByPaths>true</GroupSourcesByPaths>
+      <HeaderScanMode>SourceDirs</HeaderScanMode>
+    </ProjectModeSettings>
+  </Project>
+  <Build xsi:type="com.visualgdb.build.cmake">
+    <BuildLogMode xsi:nil="true" />
+    <ToolchainID>
+      <ID>com.visualgdb.xtensa-esp32-elf</ID>
+      <Version>
+        <GCC>11.2.0</GCC>
+        <GDB>9.2.90</GDB>
+        <Revision>2</Revision>
+      </Version>
+    </ToolchainID>
+    <RelativeSourceDirectory>..</RelativeSourceDirectory>
+    <ConfigurationType>DEBUG</ConfigurationType>
+    <BinaryDirectory>build/$(PlatformName)/$(ConfigurationName)</BinaryDirectory>
+    <MakeCommandTemplate>
+      <SkipWhenRunningCommandList>false</SkipWhenRunningCommandList>
+      <Command>$(ToolchainNinja)</Command>
+      <WorkingDirectory>$(BuildDir)</WorkingDirectory>
+      <BackgroundMode xsi:nil="true" />
+    </MakeCommandTemplate>
+    <CMakeCommand>
+      <SkipWhenRunningCommandList>false</SkipWhenRunningCommandList>
+      <Command>$(SYSPROGS_CMAKE_PATH)</Command>
+      <BackgroundMode xsi:nil="true" />
+    </CMakeCommand>
+    <UpdateSourcesInCMakeFile>true</UpdateSourcesInCMakeFile>
+    <ExportCompileCommands>false</ExportCompileCommands>
+    <DisableToolchainFile>false</DisableToolchainFile>
+    <CMakeMakefileType>Ninja</CMakeMakefileType>
+    <DeployAsRoot>false</DeployAsRoot>
+    <CMakeCleanMode>RemoveBuildDirectory</CMakeCleanMode>
+    <UseCCache>false</UseCCache>
+    <ProjectModeSettings>
+      <ProjectItemSettings>
+        <GroupSourcesByTypes>true</GroupSourcesByTypes>
+        <GroupSourcesByPaths>true</GroupSourcesByPaths>
+        <GroupTargetsByPaths>true</GroupTargetsByPaths>
+        <FollowCMakeSourceGroups>false</FollowCMakeSourceGroups>
+        <AutoRefreshProject>true</AutoRefreshProject>
+        <AlwaysConsiderOutdated>false</AlwaysConsiderOutdated>
+        <SortTargetsByName>true</SortTargetsByName>
+        <RedundantTargetMode>HideOuterProjectTargets</RedundantTargetMode>
+        <SortSourcesByName>true</SortSourcesByName>
+        <BuildAllTargetsInSubdir>false</BuildAllTargetsInSubdir>
+        <FoldSingleItemPathLevels>true</FoldSingleItemPathLevels>
+      </ProjectItemSettings>
+      <TargetSpecificSettings />
+      <SetLDLibraryPathFromDependentArtifacts>true</SetLDLibraryPathFromDependentArtifacts>
+      <ProjectGUID>eadcc9ab-72b3-4b51-a838-593e5d80ddf7</ProjectGUID>
+      <VirtualFolders />
+      <ConfigurationNameCase>Upper</ConfigurationNameCase>
+      <DefaultHeaderDiscoveryMode>HeaderDirectoryAndSubdirectories</DefaultHeaderDiscoveryMode>
+      <EnableFastUpToDateCheck>true</EnableFastUpToDateCheck>
+      <ESPIDFExtension>
+        <IDFCheckout>
+          <Version>release/v5.0</Version>
+          <Subdirectory>esp-idf/v5.0</Subdirectory>
+          <Type>ESPIDF</Type>
+        </IDFCheckout>
+        <COMPort>COM17</COMPort>
+        <SuppressTestPrerequisiteChecks>false</SuppressTestPrerequisiteChecks>
+        <UseCCache>false</UseCCache>
+        <DeviceID>ESP32S3</DeviceID>
+      </ESPIDFExtension>
+    </ProjectModeSettings>
+  </Build>
+  <CustomBuild>
+    <PreSyncActions />
+    <PreBuildActions />
+    <PostBuildActions />
+    <PreCleanActions />
+    <PostCleanActions />
+  </CustomBuild>
+  <CustomDebug>
+    <PreDebugActions />
+    <PostDebugActions />
+    <DebugStopActions />
+    <BreakMode>Default</BreakMode>
+  </CustomDebug>
+  <DeviceTerminalSettings>
+    <Connection xsi:type="com.sysprogs.terminal.connection.serial">
+      <ComPortName>COM17</ComPortName>
+      <AdvancedSettings>
+        <BaudRate>115200</BaudRate>
+        <DataBits>8</DataBits>
+        <Parity>None</Parity>
+        <StopBits>One</StopBits>
+        <FlowControl>None</FlowControl>
+      </AdvancedSettings>
+    </Connection>
+    <LastConnectionTime>0</LastConnectionTime>
+    <EchoTypedCharacters>false</EchoTypedCharacters>
+    <ClearContentsWhenReconnecting>true</ClearContentsWhenReconnecting>
+    <ReconnectAutomatically>false</ReconnectAutomatically>
+    <DisplayMode>ASCII</DisplayMode>
+    <Colors>
+      <Background>
+        <Alpha>255</Alpha>
+        <Red>0</Red>
+        <Green>0</Green>
+        <Blue>0</Blue>
+      </Background>
+      <Disconnected>
+        <Alpha>255</Alpha>
+        <Red>169</Red>
+        <Green>169</Green>
+        <Blue>169</Blue>
+      </Disconnected>
+      <Text>
+        <Alpha>255</Alpha>
+        <Red>211</Red>
+        <Green>211</Green>
+        <Blue>211</Blue>
+      </Text>
+      <Echo>
+        <Alpha>255</Alpha>
+        <Red>144</Red>
+        <Green>238</Green>
+        <Blue>144</Blue>
+      </Echo>
+      <Inactive>
+        <Alpha>255</Alpha>
+        <Red>169</Red>
+        <Green>169</Green>
+        <Blue>169</Blue>
+      </Inactive>
+    </Colors>
+    <HexSettings>
+      <MaximumBytesPerLine>16</MaximumBytesPerLine>
+      <ShowTextView>true</ShowTextView>
+      <BreaksAroundEcho>true</BreaksAroundEcho>
+      <AutoSend>true</AutoSend>
+      <SendAsHex>true</SendAsHex>
+      <TimeoutForAutoBreak>0</TimeoutForAutoBreak>
+    </HexSettings>
+    <LineEnding>LF</LineEnding>
+    <TreatLFAsCRLF>false</TreatLFAsCRLF>
+    <KeepOpenAfterExit>false</KeepOpenAfterExit>
+    <ShowAfterProgramming>false</ShowAfterProgramming>
+  </DeviceTerminalSettings>
+  <CustomShortcuts>
+    <Shortcuts />
+    <ShowMessageAfterExecuting>true</ShowMessageAfterExecuting>
+  </CustomShortcuts>
+  <UserDefinedVariables />
+  <ImportedPropertySheets />
+  <CodeSense>
+    <Enabled>Unknown</Enabled>
+    <ExtraSettings>
+      <HideErrorsInSystemHeaders>true</HideErrorsInSystemHeaders>
+      <SupportLightweightReferenceAnalysis>true</SupportLightweightReferenceAnalysis>
+      <CheckForClangFormatFiles>true</CheckForClangFormatFiles>
+      <FormattingEngine xsi:nil="true" />
+    </ExtraSettings>
+    <CodeAnalyzerSettings>
+      <Enabled>false</Enabled>
+    </CodeAnalyzerSettings>
+  </CodeSense>
+  <Configurations>
+    <VisualGDBConfiguration>
+      <Name>Debug</Name>
+      <BuildSettingsExtension xsi:type="com.visualgdb.build.external.esp-idf.cmake.extension" />
+    </VisualGDBConfiguration>
+    <VisualGDBConfiguration>
+      <Name>Release</Name>
+      <BuildSettingsExtension xsi:type="com.visualgdb.build.external.esp-idf.cmake.extension" />
+    </VisualGDBConfiguration>
+  </Configurations>
+  <ProgramArgumentsSuggestions />
+  <Debug xsi:type="com.visualgdb.debug.embedded">
+    <AdditionalStartupCommands />
+    <AdditionalGDBSettings>
+      <Features>
+        <DisableAutoDetection>false</DisableAutoDetection>
+        <UseFrameParameter>false</UseFrameParameter>
+        <SimpleValuesFlagSupported>false</SimpleValuesFlagSupported>
+        <ListLocalsSupported>false</ListLocalsSupported>
+        <ByteLevelMemoryCommandsAvailable>false</ByteLevelMemoryCommandsAvailable>
+        <ThreadInfoSupported>false</ThreadInfoSupported>
+        <PendingBreakpointsSupported>false</PendingBreakpointsSupported>
+        <SupportTargetCommand>false</SupportTargetCommand>
+        <ReliableBreakpointNotifications>false</ReliableBreakpointNotifications>
+      </Features>
+      <EnableSmartStepping>false</EnableSmartStepping>
+      <FilterSpuriousStoppedNotifications>false</FilterSpuriousStoppedNotifications>
+      <ForceSingleThreadedMode>false</ForceSingleThreadedMode>
+      <UseAppleExtensions>false</UseAppleExtensions>
+      <CanAcceptCommandsWhileRunning>false</CanAcceptCommandsWhileRunning>
+      <MakeLogFile>false</MakeLogFile>
+      <IgnoreModuleEventsWhileStepping>true</IgnoreModuleEventsWhileStepping>
+      <UseRelativePathsOnly>false</UseRelativePathsOnly>
+      <ExitAction>None</ExitAction>
+      <DisableDisassembly>false</DisableDisassembly>
+      <ExamineMemoryWithXCommand>false</ExamineMemoryWithXCommand>
+      <StepIntoNewInstanceEntry>app_main</StepIntoNewInstanceEntry>
+      <ExamineRegistersInRawFormat>true</ExamineRegistersInRawFormat>
+      <DisableSignals>false</DisableSignals>
+      <EnableAsyncExecutionMode>false</EnableAsyncExecutionMode>
+      <AsyncModeSupportsBreakpoints>true</AsyncModeSupportsBreakpoints>
+      <TemporaryBreakConsolidationTimeout>0</TemporaryBreakConsolidationTimeout>
+      <EnableNonStopMode>false</EnableNonStopMode>
+      <MaxBreakpointLimit>0</MaxBreakpointLimit>
+      <EnableVerboseMode>true</EnableVerboseMode>
+      <EnablePrettyPrinters>false</EnablePrettyPrinters>
+    </AdditionalGDBSettings>
+    <DebugMethod>
+      <ID>openocd</ID>
+      <InterfaceID>esp_usb_jtag</InterfaceID>
+      <InterfaceSerialNumber>7C:00:00:00:00:00</InterfaceSerialNumber>
+      <Configuration xsi:type="com.visualgdb.edp.openocd.settings.esp32">
+        <CommandLine>-f interface/esp_usb_jtag.cfg -f target/esp32s3.cfg</CommandLine>
+        <ExtraParameters>
+          <Frequency xsi:nil="true" />
+          <BoostedFrequency xsi:nil="true" />
+          <ConnectUnderReset>false</ConnectUnderReset>
+        </ExtraParameters>
+        <LoadProgressGUIThreshold>131072</LoadProgressGUIThreshold>
+        <ProgramMode>Enabled</ProgramMode>
+        <StartupCommands>
+          <string>set remotetimeout 60</string>
+          <string>target remote :$$SYS:GDB_PORT$$</string>
+          <string>mon gdb_breakpoint_override hard</string>
+          <string>mon reset halt</string>
+          <string>load</string>
+        </StartupCommands>
+        <ProgramFLASHUsingExternalTool>false</ProgramFLASHUsingExternalTool>
+        <PreferredGDBPort>0</PreferredGDBPort>
+        <PreferredTelnetPort>0</PreferredTelnetPort>
+        <AlwaysPassSerialNumber>false</AlwaysPassSerialNumber>
+        <SelectedCoreIndex xsi:nil="true" />
+        <LiveMemoryTimeout>5000</LiveMemoryTimeout>
+        <SuggestionLogicRevision>1</SuggestionLogicRevision>
+        <CheckFLASHSize>true</CheckFLASHSize>
+        <FLASHSettings>
+          <Size>size2MB</Size>
+          <Frequency>freq40M</Frequency>
+          <Mode>DIO</Mode>
+        </FLASHSettings>
+        <PatchBootloader>true</PatchBootloader>
+      </Configuration>
+    </DebugMethod>
+    <AutoDetectRTOS>true</AutoDetectRTOS>
+    <SemihostingSupport>Auto</SemihostingSupport>
+    <SemihostingPollingDelay>0</SemihostingPollingDelay>
+    <StepIntoEntryPoint>false</StepIntoEntryPoint>
+    <ReloadFirmwareOnReset>false</ReloadFirmwareOnReset>
+    <ValidateEndOfStackAddress>true</ValidateEndOfStackAddress>
+    <StopAtEntryPoint>false</StopAtEntryPoint>
+    <EnableVirtualHalts>false</EnableVirtualHalts>
+    <DynamicAnalysisSettings />
+    <EndOfStackSymbol>_estack</EndOfStackSymbol>
+    <TimestampProviderTicksPerSecond>0</TimestampProviderTicksPerSecond>
+    <KeepConsoleAfterExit>false</KeepConsoleAfterExit>
+    <UnusedStackFillPattern xsi:nil="true" />
+    <CheckInterfaceDrivers>true</CheckInterfaceDrivers>
+  </Debug>
+</VisualGDBProjectSettings2>

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/components/wolfssl/CMakeLists.txt

@@ -0,0 +1,232 @@
+#
+#  Copyright (C) 2006-2023 wolfSSL Inc.
+#
+#  This file is part of wolfSSL.
+#
+#  wolfSSL is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  wolfSSL is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, write to the Free Software
+#  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
+#
+# cmake for wolfssl
+#
+cmake_minimum_required(VERSION 3.5)
+set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_USER_SETTINGS")
+set(CMAKE_CURRENT_SOURCE_DIR ".")
+
+# We are currently in [root]/IDE/Espressif/ESP-IDF/examples/wolfssl_test/components/wolfssl
+# The root of wolfSSL is 7 directories up from here:
+get_filename_component(WOLFSSL_ROOT  "../../../../../../../" ABSOLUTE)
+
+# Espressif may take several passes through this makefile. Check to see if we found IDF
+string(COMPARE EQUAL "${PROJECT_SOURCE_DIR}" "" WOLFSSL_FOUND_IDF)
+
+if($WOLFSSL_FOUND_IDF)
+    message(STATUS "IDF_PATH = $ENV{IDF_PATH}")
+    message(STATUS "WOLFSSL_ROOT = ${WOLFSSL_ROOT}")
+    message(STATUS "PROJECT_SOURCE_DIR = ${PROJECT_SOURCE_DIR}")
+endif()
+
+# get a list of all wolfcrypt assembly files; we'll exclude them as they don't target Xtensa
+FILE(GLOB EXCLUDE_ASM *.S)
+file(GLOB_RECURSE EXCLUDE_ASM ${CMAKE_SOURCE_DIR} "${WOLFSSL_ROOT}/wolfcrypt/src/*.S")
+
+if(NOT CMAKE_BUILD_EARLY_EXPANSION)
+    message(STATUS "EXCLUDE_ASM = ${EXCLUDE_ASM}")
+endif()
+
+set(INCLUDE_PATH ${WOLFSSL_ROOT})
+
+set(COMPONENT_SRCDIRS "${WOLFSSL_ROOT}/src/"
+                        "${WOLFSSL_ROOT}/wolfcrypt/src/"
+                        "${WOLFSSL_ROOT}/wolfcrypt/src/port/Espressif/"
+                        "${WOLFSSL_ROOT}/wolfcrypt/src/port/atmel/"
+                        "${WOLFSSL_ROOT}/wolfcrypt/benchmark/"
+                        "${WOLFSSL_ROOT}/wolfcrypt/test/"
+                        )
+
+set(COMPONENT_REQUIRES lwip)
+
+
+# check to see if there's both a local copy and EDP-IDF copy of the wolfssl and/or wolfssh components
+if( EXISTS "${CMAKE_HOME_DIRECTORY}/components/wolfssl/" AND EXISTS "$ENV{IDF_PATH}/components/wolfssl/" )
+    #
+    # wolfSSL found in both ESP-IDF and local project - needs to be resolved by user
+    #
+    message(STATUS "")
+    message(STATUS "**************************************************************************************")
+    message(STATUS "")
+    message(STATUS "Error: Found components/wolfssl in both local project and IDF_PATH")
+    message(STATUS "")
+    message(STATUS "To proceed: ")
+    message(STATUS "")
+    message(STATUS "Remove either the local project component: ${CMAKE_HOME_DIRECTORY}/components/wolfssl/ ")
+    message(STATUS "or the Espressif shared component installed at: $ENV{IDF_PATH}/components/wolfssl/ ")
+    message(STATUS "")
+    message(FATAL_ERROR "Please use wolfSSL in either local project or Espressif components, but not both.")
+    message(STATUS "")
+    message(STATUS "**************************************************************************************")
+    message(STATUS "")
+
+    # Optional: if you change the above FATAL_ERROR to STATUS you can warn at runtime with this macro definition:
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_MULTI_INSTALL_WARNING")
+
+else()
+    if( EXISTS "$ENV{IDF_PATH}/components/wolfssl/" )
+        #
+        # wolfSSL found in ESP-IDF components and is assumed to be already configured in user_settings.h via setup.
+        #
+        message(STATUS "")
+        message(STATUS "Using components/wolfssl in IDF_PATH = $ENV{IDF_PATH}")
+        message(STATUS "")
+    else()
+        #
+        # wolfSSL is not an ESP-IDF component. We need to now determine if it is local and if so if it is part of the wolfSSL repo
+        # or if  wolfSSL is simply installed as a local component.
+        #
+        if( EXISTS "${CMAKE_HOME_DIRECTORY}/components/wolfssl/" )
+            #
+            # wolfSSL found in local project.
+            #
+            if( EXISTS "${CMAKE_HOME_DIRECTORY}/components/wolfssl/include/" )
+                message(STATUS "")
+                message(STATUS "Using installed project ./components/wolfssl in CMAKE_HOME_DIRECTORY = $ENV{CMAKE_HOME_DIRECTORY}")
+                message(STATUS "")
+                #
+                # Note we already checked above and confirmed there's not another wolfSSL installed in the ESP-IDF components.
+                #
+                # We won't do anything else here, as it will be assumed the original install completed successfully.
+                #
+            else()
+                #
+                # This is the developer repo mode. wolfSSL will be assume to be not installed to ESP-IDF nor local project
+                # In this configuration, we are likely running a wolfSSL example found directly in the repo.
+                #
+                message(STATUS "")
+                message(STATUS "Using developer repo ./components/wolfssl in CMAKE_HOME_DIRECTORY = $ENV{CMAKE_HOME_DIRECTORY}")
+                message(STATUS "")
+
+                message(STATUS "************************************************************************************************")
+                # When in developer mode, we are typically running wolfSSL examples such as benchmark or test directories.
+                # However, the as-cloned or distributed wolfSSL does not have the ./include/ directory, so we'll add it as needed.
+                #
+                # first check if there's a [root]/include/user_settings.h
+                if( EXISTS "${WOLFSSL_ROOT}/include/user_settings.h" )
+                    # we won't overwrite an existing user settings file, just note that we already have one:
+                    message(STATUS "Found wolfSSL user_settings.h in ${WOLFSSL_ROOT}/include/user_settings.h")
+                else()
+                    message(STATUS "Installing wolfSSL user_settings.h to ${WOLFSSL_ROOT}/include/user_settings.h")
+                    file(COPY "${WOLFSSL_ROOT}/IDE/Espressif/ESP-IDF/user_settings.h" DESTINATION "${WOLFSSL_ROOT}/include/")
+                endif() # user_settings.h
+
+                # next check if there's a [root]/include/config.h
+                if( EXISTS "${WOLFSSL_ROOT}/include/config.h" )
+                    message(STATUS "Found wolfSSL config.h in ${WOLFSSL_ROOT}/include/config.h")
+                else()
+                    message(STATUS "Installing wolfSSL config.h to ${WOLFSSL_ROOT}/include/config.h")
+                    file(COPY "${WOLFSSL_ROOT}/IDE/Espressif/ESP-IDF/dummy_config_h" DESTINATION "${WOLFSSL_ROOT}/include/")
+                    file(RENAME "${WOLFSSL_ROOT}/include/dummy_config_h" "${WOLFSSL_ROOT}/include/config.h")
+                endif() # config.h
+                message(STATUS "************************************************************************************************")
+                message(STATUS "")
+            endif()
+
+        else()
+            # we did not find a ./components/wolfssl/include/ directory from this pass of cmake.
+            if($WOLFSSL_FOUND_IDF)
+                message(STATUS "")
+                message(STATUS "WARNING: wolfSSL not found.")
+                message(STATUS "")
+            else()
+                # probably needs to be re-parsed by Espressif
+                message(STATUS "wolfSSL found IDF. Project Source:${PROJECT_SOURCE_DIR}")
+            endif() # else we have not found ESP-IDF yet
+        endif() # else not a local wolfSSL component
+
+    endif() #else not an ESP-IDF component
+endif() # else not local copy and EDP-IDF wolfSSL
+
+
+# RTOS_IDF_PATH is typically:
+# "/Users/{username}/Desktop/esp-idf/components/freertos/include/freertos"
+# depending on the environment, we may need to swap backslashes with forward slashes
+string(REPLACE "\\" "/" RTOS_IDF_PATH "$ENV{IDF_PATH}/components/freertos/include/freertos")
+
+# ESP-IDF after version 4.4x has a different RTOS directory structure
+string(REPLACE "\\" "/" RTOS_IDF_PATH5 "$ENV{IDF_PATH}/components/freertos/FreeRTOS-Kernel/include/freertos")
+
+if(IS_DIRECTORY ${IDF_PATH}/components/freertos/FreeRTOS-Kernel/)
+    set(COMPONENT_ADD_INCLUDEDIRS
+        "."
+       "${WOLFSSL_ROOT}/include"
+       "${RTOS_IDF_PATH5}"
+       "${WOLFSSL_ROOT}"
+       )
+else()
+
+   set(COMPONENT_ADD_INCLUDEDIRS
+       "."
+       "${WOLFSSL_ROOT}/include"
+       "${RTOS_IDF_PATH}"
+       "${WOLFSSL_ROOT}"
+      )
+endif()
+
+if(IS_DIRECTORY ${IDF_PATH}/components/cryptoauthlib)
+    list(APPEND COMPONENT_ADD_INCLUDEDIRS "../cryptoauthlib/lib")
+endif()
+
+set(COMPONENT_SRCEXCLUDE
+    "${WOLFSSL_ROOT}/src/bio.c"
+    "${WOLFSSL_ROOT}/src/conf.c"
+    "${WOLFSSL_ROOT}/src/misc.c"
+    "${WOLFSSL_ROOT}/src/pk.c"
+    "${WOLFSSL_ROOT}/src/ssl_asn1.c" # included by ssl.c
+    "${WOLFSSL_ROOT}/src/ssl_bn.c" # included by ssl.c
+    "${WOLFSSL_ROOT}/src/ssl_misc.c" # included by ssl.c
+    "${WOLFSSL_ROOT}/src/x509.c"
+    "${WOLFSSL_ROOT}/src/x509_str.c"
+    "${WOLFSSL_ROOT}/wolfcrypt/src/evp.c"
+    "${WOLFSSL_ROOT}/wolfcrypt/src/misc.c"
+    "${EXCLUDE_ASM}"
+    )
+set(COMPONENT_PRIV_INCLUDEDIRS ${IDF_PATH}/components/driver/include)
+
+register_component()
+
+# some optional diagnostics
+if (0)
+    get_cmake_property(_variableNames VARIABLES)
+    list (SORT _variableNames)
+    message(STATUS "")
+    message(STATUS "ALL VARIABLES BEGIN")
+    message(STATUS "")
+    foreach (_variableName ${_variableNames})
+        message(STATUS "${_variableName}=${${_variableName}}")
+    endforeach()
+    message(STATUS "")
+    message(STATUS "ALL VARIABLES END")
+    message(STATUS "")
+endif()
+
+# check to see if there's both a local copy and EDP-IDF copy of the wolfssl components
+if( EXISTS "${CMAKE_HOME_DIRECTORY}/components/wolfssl/" AND EXISTS "$ENV{IDF_PATH}/components/wolfssl/" )
+    message(STATUS "")
+    message(STATUS "")
+    message(STATUS "********************************************************************")
+    message(STATUS "WARNING: Found components/wolfssl in both local project and IDF_PATH")
+    message(STATUS "********************************************************************")
+    message(STATUS "")
+endif()
+# end multiple component check
+
+

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/components/wolfssl/component.mk

@@ -1,48 +1,40 @@
-# -*- coding: utf-8 -*-
-#
-# conftest.py
-#
-# Copyright (C) 2006-2021 wolfSSL Inc.
-#
-# This file is part of wolfSSL.
-#
-# wolfSSL is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# wolfSSL is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
-#/
-#/
-
-# pylint: disable=missing-docstring, redefined-outer-name
-
-import sys
-import ssl
-import wolfssl
-import pytest
-
-@pytest.fixture
-def tcp_socket():
-    import socket
-    from contextlib import closing
-
-    with closing(socket.socket(socket.AF_INET, socket.SOCK_STREAM)) as sock:
-        yield sock
-
-@pytest.fixture(
-    params=[ssl, wolfssl]  if sys.version_info.major == 3 else [wolfssl],
-    ids=["ssl", "wolfssl"] if sys.version_info.major == 3 else ["wolfssl"])
-def ssl_provider(request):
-    return request.param
-
-@pytest.fixture
-def ssl_context(ssl_provider):
-    return ssl_provider.SSLContext(ssl_provider.PROTOCOL_SSLv23)
+#
+# Copyright (C) 2006-2023 wolfSSL Inc.
+#
+# This file is part of wolfSSL.
+#
+# wolfSSL is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# wolfSSL is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
+#
+#
+# Component Makefile
+#
+
+COMPONENT_ADD_INCLUDEDIRS := . ./include
+
+COMPONENT_ADD_INCLUDEDIRS += "$ENV{IDF_PATH}/components/freertos/include/freertos"
+# COMPONENT_ADD_INCLUDEDIRS += "$ENV{IDF_PATH}/soc/esp32s3/include/soc"
+
+COMPONENT_SRCDIRS := src wolfcrypt/src
+COMPONENT_SRCDIRS += wolfcrypt/src/port/Espressif
+COMPONENT_SRCDIRS += wolfcrypt/src/port/atmel
+COMPONENT_SRCDIRS += wolfcrypt/benchmark
+COMPONENT_SRCDIRS += wolfcrypt/test
+
+CFLAGS +=-DWOLFSSL_USER_SETTINGS
+
+COMPONENT_OBJEXCLUDE := wolfcrypt/src/aes_asm.o
+COMPONENT_OBJEXCLUDE += wolfcrypt/src/evp.o
+COMPONENT_OBJEXCLUDE += wolfcrypt/src/misc.o
+COMPONENT_OBJEXCLUDE += src/bio.o

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/main/CMakeLists.txt

@@ -4,7 +4,72 @@
 #
 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_USER_SETTINGS")
 
-set(COMPONENT_SRCS "benchmark.c" "helper.c")
+set(COMPONENT_SRCS main.c)
 set(COMPONENT_ADD_INCLUDEDIRS ".")
 
+set (git_cmd "git")
+
+if( EXISTS "${CMAKE_HOME_DIRECTORY}/components/wolfssl/" AND EXISTS "$ENV{IDF_PATH}/components/wolfssl/" )
+    #
+    # wolfSSL found in both ESP-IDF and local project - needs to be resolved by user
+    #
+    message(STATUS "")
+    message(STATUS "WARNING: Found components/wolfssl in both local project and IDF_PATH")
+    message(STATUS "")
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_MULTI_INSTALL_WARNING")
+endif()
+
 register_component()
+
+#
+# LIBWOLFSSL_SAVE_INFO(VAR_OUPUT THIS_VAR VAR_RESULT)
+#
+# Save the THIS_VAR as a string in a macro called VAR_OUPUT
+#
+# VAR_OUPUT:  the name of the macro to define
+# THIS_VAR:   the OUTPUT_VARIABLE result from a execute_process()
+# VAR_RESULT: the RESULT_VARIABLE from a execute_process(); "0" if successful.
+#
+function ( LIBWOLFSSL_SAVE_INFO VAR_OUPUT THIS_VAR VAR_RESULT )
+    # is the RESULT_VARIABLE output value 0? If so, IS_VALID_VALUE is true.
+    string(COMPARE EQUAL "${VAR_RESULT}" "0" IS_VALID_VALUE)
+
+    # if we had a successful operation, save the THIS_VAR in VAR_OUPUT
+    if(${IS_VALID_VALUE})
+        # strip newline chars in THIS_VAR parameter and save in VAR_VALUE
+        string(REPLACE "\n" ""  VAR_VALUE  ${THIS_VAR})
+
+        # we'll could percolate the value to the parent for possible later use
+        # set(${VAR_OUPUT} ${VAR_VALUE} PARENT_SCOPE)
+
+        # but we're only using it here in this function
+        set(${VAR_OUPUT} ${VAR_VALUE})
+
+        # we'll print what we found to the console
+        message(STATUS "Found ${VAR_OUPUT}=${VAR_VALUE}")
+
+        # the interesting part is defining the VAR_OUPUT name a value to use in the app
+        add_definitions(-D${VAR_OUPUT}=\"${VAR_VALUE}\")
+    else()
+        # if we get here, check the execute_process command and parameters.
+        message(STATUS "LIBWOLFSSL_SAVE_INFO encountered a non-zero VAR_RESULT")
+        set(${VAR_OUPUT} "Unknown")
+    endif()
+endfunction() # LIBWOLFSSL_SAVE_INFO
+
+if(NOT CMAKE_BUILD_EARLY_EXPANSION)
+    # LIBWOLFSSL_VERSION_GIT_HASH
+    execute_process(COMMAND ${git_cmd} "rev-parse" "HEAD" OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET )
+    LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_GIT_HASH "${TMP_OUT}" "${TMP_RES}")
+
+    # LIBWOLFSSL_VERSION_GIT_SHORT_HASH
+    execute_process(COMMAND ${git_cmd} "rev-parse" "--short" "HEAD" OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET )
+    LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_GIT_SHORT_HASH "${TMP_OUT}" "${TMP_RES}")
+
+    # LIBWOLFSSL_VERSION_GIT_HASH_DATE
+    execute_process(COMMAND ${git_cmd} "show" "--no-patch" "--no-notes" "--pretty=\'\%cd\'" OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES  )
+    LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_GIT_HASH_DATE "${TMP_OUT}" "${TMP_RES}")
+endif()
+
+message(STATUS "")
+

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/main/helper.c

@@ -1,172 +0,0 @@
-/* helper.c
- *
- * Copyright (C) 2006-2021 wolfSSL Inc.
- *
- * This file is part of wolfSSL.
- *
- * wolfSSL is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * wolfSSL is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
- */
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include <wolfssl/wolfcrypt/settings.h>
-#include <wolfcrypt/benchmark/benchmark.h>
-
-#include "sdkconfig.h"
-#include "esp_log.h"
-
-#define WOLFSSL_BENCH_ARGV                 CONFIG_BENCH_ARGV
-
-/* proto-type */
-extern void wolf_benchmark_task();
-static const char* const TAG = "wolfbenchmark";
-char* __argv[22];
-
-#if defined(WOLFSSL_ESPWROOM32SE) && defined(HAVE_PK_CALLBACKS) \
-                                  && defined(WOLFSSL_ATECC508A)
-
-#include "wolfssl/wolfcrypt/port/atmel/atmel.h"
-
-/* when you need to use a custom slot allocation, */
-/* enable the definition CUSTOM_SLOT_ALLOCAION.   */
-#if defined(CUSTOM_SLOT_ALLOCATION)
-
-static byte mSlotList[ATECC_MAX_SLOT];
-
-/* initialize slot array */
-void my_atmel_slotInit()
-{
-    int i;
-    for(i = 0;i < ATECC_MAX_SLOT;i++) {
-        mSlotList[i] = ATECC_INVALID_SLOT;
-    }
-}
-
-/* allocate slot depending on slotType */
-int my_atmel_alloc(int slotType)
-{
-    int i, slot = -1;
-
-    switch(slotType){
-        case ATMEL_SLOT_ENCKEY:
-            slot = 4;
-            break;
-        case ATMEL_SLOT_DEVICE:
-            slot = 0;
-            break;
-        case ATMEL_SLOT_ECDHE:
-            slot = 0;
-            break;
-        case ATMEL_SLOT_ECDHE_ENC:
-            slot = 4;
-            break;
-        case ATMEL_SLOT_ANY:
-            for(i = 0;i < ATECC_MAX_SLOT;i++){
-                if(mSlotList[i] == ATECC_INVALID_SLOT){
-                    slot = i;
-                    break;
-                }
-            }
-    }
-
-    return slot;
-}
-
-/* free slot array       */
-void my_atmel_free(int slotId)
-{
-    if(slotId >= 0 && slotId < ATECC_MAX_SLOT){
-        mSlotList[slotId] = ATECC_INVALID_SLOT;
-    }
-}
-
-#endif /* CUSTOM_SLOT_ALLOCATION                                       */
-#endif /* WOLFSSL_ESPWROOM32SE && HAVE_PK_CALLBACK && WOLFSSL_ATECC508A */
-
-int construct_argv()
-{
-    int cnt = 0;
-    int i = 0;
-    int len = 0;
-    char *_argv;            /* buffer for copying the string    */
-    char *ch;               /* char pointer to trace the string */
-    char buff[16] = { 0 };  /* buffer for a argument copy       */
-
-    printf("arg:%s\n", CONFIG_BENCH_ARGV);
-    len = strlen(CONFIG_BENCH_ARGV);
-    _argv = (char*)malloc(len + 1);
-    if (!_argv) {
-        return -1;
-    }
-    memset(_argv, 0, len+1);
-    memcpy(_argv, CONFIG_BENCH_ARGV, len);
-    _argv[len] = '\0';
-    ch = _argv;
-
-    __argv[cnt] = malloc(10);
-    sprintf(__argv[cnt], "benchmark");
-    __argv[cnt][9] = '\0';
-    cnt = 1;
-
-    while (*ch != '\0')
-    {
-        /* skip white-space */
-        while (*ch == ' ') { ++ch; }
-
-        memset(buff, 0, sizeof(buff));
-        /* copy each args into buffer */
-        i = 0;
-        while ((*ch != ' ') && (*ch != '\0') && (i < 16)) {
-            buff[i] = *ch;
-            ++i;
-            ++ch;
-        }
-        /* copy the string into argv */
-        __argv[cnt] = (char*)malloc(i + 1);
-        memset(__argv[cnt], 0, i + 1);
-        memcpy(__argv[cnt], buff, i + 1);
-        /* next args */
-        ++cnt;
-    }
-
-    free(_argv);
-
-    return (cnt);
-}
-
-/* entry point */
-void app_main(void)
-{
-    (void) TAG;
-#ifndef NO_CRYPT_BENCHMARK
-
-/* when using atecc608a on esp32-wroom-32se */
-#if defined(WOLFSSL_ESPWROOM32SE) && defined(HAVE_PK_CALLBACKS) \
-                                  && defined(WOLFSSL_ATECC508A)
-    #if defined(CUSTOM_SLOT_ALLOCATION)
-    my_atmel_slotInit();
-    /* to register the callback, it needs to be initialized. */
-    if ((wolfCrypt_Init()) != 0) {
-       ESP_LOGE(TAG, "wolfCrypt_Init failed");
-       return;
-    }
-    atmel_set_slot_allocator(my_atmel_alloc, my_atmel_free);
-    #endif
-#endif
-    wolf_benchmark_task();
-#else
-#endif /* NO_CRYPT_BENCHMARK */
-}

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/main/main.c

@@ -0,0 +1,266 @@
+/* benchmark main.c
+ *
+ * Copyright (C) 2006-2023 wolfSSL Inc.
+ *
+ * This file is part of wolfSSL.
+ *
+ * wolfSSL is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * wolfSSL is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
+ */
+/* ESP-IDF */
+#include <esp_log.h>
+#include "sdkconfig.h"
+
+/* wolfSSL */
+#include <wolfssl/wolfcrypt/settings.h>
+#include <user_settings.h>
+#include <wolfssl/version.h>
+#ifndef WOLFSSL_ESPIDF
+    #warning "problem with wolfSSL user_settings. Check components/wolfssl/include"
+#endif
+
+#include <wolfssl/wolfcrypt/types.h>
+#include <wolfcrypt/benchmark/benchmark.h>
+
+/* check BENCH_ARGV in sdkconfig to determine need to set WOLFSSL_BENCH_ARGV */
+#ifdef CONFIG_BENCH_ARGV
+#define WOLFSSL_BENCH_ARGV CONFIG_BENCH_ARGV
+#define WOLFSSL_BENCH_ARGV_MAX_ARGUMENTS 22 /* arbitrary number of max args */
+#endif
+
+/*
+** the wolfssl component can be installed in either:
+**
+**   - the ESP-IDF component directory
+**
+**       ** OR **
+**
+**   - the local project component directory
+**
+** it is not recommended to install in both.
+**
+*/
+
+#include "main.h"
+
+static const char* const TAG = "wolfssl_benchmark";
+
+#if defined(WOLFSSL_ESPWROOM32SE) && defined(HAVE_PK_CALLBACKS) \
+                                  && defined(WOLFSSL_ATECC508A)
+
+#include "wolfssl/wolfcrypt/port/atmel/atmel.h"
+
+/* when you need to use a custom slot allocation, */
+/* enable the definition CUSTOM_SLOT_ALLOCAION.   */
+#if defined(CUSTOM_SLOT_ALLOCATION)
+
+static byte mSlotList[ATECC_MAX_SLOT];
+
+/* initialize slot array */
+void my_atmel_slotInit()
+{
+    int i;
+    for(i = 0;i < ATECC_MAX_SLOT;i++) {
+        mSlotList[i] = ATECC_INVALID_SLOT;
+    }
+}
+
+/* allocate slot depending on slotType */
+int my_atmel_alloc(int slotType)
+{
+    int i, slot = -1;
+
+    switch(slotType){
+        case ATMEL_SLOT_ENCKEY:
+            slot = 4;
+            break;
+        case ATMEL_SLOT_DEVICE:
+            slot = 0;
+            break;
+        case ATMEL_SLOT_ECDHE:
+            slot = 0;
+            break;
+        case ATMEL_SLOT_ECDHE_ENC:
+            slot = 4;
+            break;
+        case ATMEL_SLOT_ANY:
+            for(i = 0;i < ATECC_MAX_SLOT;i++){
+                if(mSlotList[i] == ATECC_INVALID_SLOT){
+                    slot = i;
+                    break;
+                }
+            }
+    }
+
+    return slot;
+}
+
+/* free slot array       */
+void my_atmel_free(int slotId)
+{
+    if(slotId >= 0 && slotId < ATECC_MAX_SLOT){
+        mSlotList[slotId] = ATECC_INVALID_SLOT;
+    }
+}
+
+#endif /* CUSTOM_SLOT_ALLOCATION                                       */
+#endif /* WOLFSSL_ESPWROOM32SE && HAVE_PK_CALLBACK && WOLFSSL_ATECC508A */
+
+/* the following are needed by benchmark.c with args */
+#ifdef WOLFSSL_BENCH_ARGV
+char* __argv[WOLFSSL_BENCH_ARGV_MAX_ARGUMENTS];
+
+int construct_argv()
+{
+    int cnt = 0;
+    int i = 0;
+    int len = 0;
+    char *_argv; /* buffer for copying the string    */
+    char *ch; /* char pointer to trace the string */
+    char buff[16] = { 0 }; /* buffer for a argument copy       */
+
+    ESP_LOGI(TAG, "construct_argv arg:%s\n", CONFIG_BENCH_ARGV);
+    len = strlen(CONFIG_BENCH_ARGV);
+    _argv = (char*)malloc(len + 1);
+    if (!_argv) {
+        return -1;
+    }
+    memset(_argv, 0, len + 1);
+    memcpy(_argv, CONFIG_BENCH_ARGV, len);
+    _argv[len] = '\0';
+    ch = _argv;
+
+    __argv[cnt] = malloc(10);
+    sprintf(__argv[cnt], "benchmark");
+    __argv[cnt][9] = '\0';
+    cnt = 1;
+
+    while (*ch != '\0') {
+        /* check that we don't overflow manual arg assembly */
+        if (cnt >= (WOLFSSL_BENCH_ARGV_MAX_ARGUMENTS)) {
+            ESP_LOGE(TAG, "Abort construct_argv;"
+                          "Reached maximum defined arguments = %d",
+                          WOLFSSL_BENCH_ARGV_MAX_ARGUMENTS);
+            break;
+        }
+
+        /* skip white-space */
+        while (*ch == ' ') { ++ch; }
+
+        memset(buff, 0, sizeof(buff));
+        /* copy each args into buffer */
+        i = 0;
+        while ((*ch != ' ') && (*ch != '\0') && (i < 16)) {
+            buff[i] = *ch;
+            ++i;
+            ++ch;
+        }
+        /* copy the string into argv */
+        __argv[cnt] = (char*)malloc(i + 1);
+        memset(__argv[cnt], 0, i + 1);
+        memcpy(__argv[cnt], buff, i + 1);
+        /* next args */
+        ++cnt;
+    }
+
+    free(_argv);
+
+    return (cnt);
+}
+#endif
+
+/* entry point */
+void app_main(void)
+{
+    ESP_LOGI(TAG, "--------------------------------------------------------");
+    ESP_LOGI(TAG, "--------------------------------------------------------");
+    ESP_LOGI(TAG, "---------------------- BEGIN MAIN ----------------------");
+    ESP_LOGI(TAG, "--------------------------------------------------------");
+    ESP_LOGI(TAG, "--------------------------------------------------------");
+    ESP_LOGI(TAG, "CONFIG_IDF_TARGET = %s", CONFIG_IDF_TARGET);
+    ESP_LOGI(TAG, "LIBWOLFSSL_VERSION_STRING = %s", LIBWOLFSSL_VERSION_STRING);
+
+#if defined(WOLFSSL_MULTI_INSTALL_WARNING)
+    ESP_LOGI(TAG, "");
+    ESP_LOGI(TAG, "WARNING: Multiple wolfSSL installs found.");
+    ESP_LOGI(TAG, "Check ESP-IDF and local project [components] directory.");
+    ESP_LOGI(TAG, "");
+#endif
+
+#if defined(LIBWOLFSSL_VERSION_GIT_HASH)
+    ESP_LOGI(TAG, "LIBWOLFSSL_VERSION_GIT_HASH = %s", LIBWOLFSSL_VERSION_GIT_HASH);
+#endif
+
+#if defined(LIBWOLFSSL_VERSION_GIT_SHORT_HASH )
+    ESP_LOGI(TAG, "LIBWOLFSSL_VERSION_GIT_SHORT_HASH = %s", LIBWOLFSSL_VERSION_GIT_SHORT_HASH);
+#endif
+
+#if defined(LIBWOLFSSL_VERSION_GIT_HASH_DATE)
+    ESP_LOGI(TAG, "LIBWOLFSSL_VERSION_GIT_HASH_DATE = %s", LIBWOLFSSL_VERSION_GIT_HASH_DATE);
+#endif
+
+
+    /* some interesting settings are target specific (ESP32, -C3, -S3, etc */
+#if defined(CONFIG_IDF_TARGET_ESP32C3)
+    /* not available for C3 at this time */
+#elif defined(CONFIG_IDF_TARGET_ESP32S3)
+    ESP_LOGI(TAG, "CONFIG_ESP32S3_DEFAULT_CPU_FREQ_MHZ = %u MHz",
+                   CONFIG_ESP32S3_DEFAULT_CPU_FREQ_MHZ
+             );
+    ESP_LOGI(TAG, "Xthal_have_ccount = %u", Xthal_have_ccount);
+#else
+    ESP_LOGI(TAG, "CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ = %u MHz",
+                   CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ
+            );
+    ESP_LOGI(TAG, "Xthal_have_ccount = %u", Xthal_have_ccount);
+#endif
+
+    /* all platforms: stack high water mark check */
+    ESP_LOGI(TAG, "Stack HWM: %d\n", uxTaskGetStackHighWaterMark(NULL));
+    ESP_LOGI(TAG, "app_main CONFIG_BENCH_ARGV = %s", WOLFSSL_BENCH_ARGV);
+
+/* when using atecc608a on esp32-wroom-32se */
+#if defined(WOLFSSL_ESPWROOM32SE) && defined(HAVE_PK_CALLBACKS) \
+                                  && defined(WOLFSSL_ATECC508A)
+    #if defined(CUSTOM_SLOT_ALLOCATION)
+    my_atmel_slotInit();
+    /* to register the callback, it needs to be initialized. */
+    if ((wolfCrypt_Init()) != 0) {
+       ESP_LOGE(TAG, "wolfCrypt_Init failed");
+       return;
+    }
+    atmel_set_slot_allocator(my_atmel_alloc, my_atmel_free);
+    #endif
+#endif
+
+#ifdef NO_CRYPT_BENCHMARK
+    ESP_LOGI(TAG, "NO_CRYPT_BENCHMARK defined, skipping wolf_benchmark_task")
+#else
+
+    /* although wolfCrypt_Init() may be explicitly called above,
+    ** note it is still always called in wolf_benchmark_task.
+    */
+    wolf_benchmark_task();
+    /* wolfCrypt_Cleanup should always be called at completion,
+    ** and is called in wolf_benchmark_task().
+    */
+    ESP_LOGI(TAG, "Stack HWM: %d\n", uxTaskGetStackHighWaterMark(NULL));
+
+    /* after the test, we'll just wait */
+    while (1) {
+        /* nothing */
+    }
+
+#endif /* NO_CRYPT_BENCHMARK */
+} /* main */

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/main/main.h

@@ -1,6 +1,7 @@
-/* strings.h
+#pragma once
+/* benchmark main.h
  *
- * Copyright (C) 2006-2021 wolfSSL Inc.
+ * Copyright (C) 2006-2023 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *
@@ -19,4 +20,10 @@
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
  */
 
-int strncasecmp(const char *s1, const char * s2, unsigned int sz);
+void app_main(void);
+
+/* see wolfssl/wolfcrypt/benchmark/benchmark.h */
+extern void wolf_benchmark_task();
+
+
+

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/sdkconfig.defaults

@@ -1,6 +1,44 @@
 CONFIG_BENCH_ARGV="-lng 0"
-CONFIG_MAIN_TASK_STACK_SIZE=7500
 CONFIG_FREERTOS_HZ=1000
-CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=
 CONFIG_ESP32_DEFAULT_CPU_FREQ_240=y
-170 CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=240
+
+#
+# Default main stack size
+#
+# This is typically way bigger than needed for stack size. See user_settings.h
+#
+CONFIG_ESP_MAIN_TASK_STACK_SIZE=55500
+
+# Legacy stack size for older ESP-IDF versions
+CONFIG_MAIN_TASK_STACK_SIZE=55500
+
+#
+# Watchdog Timers
+#
+# We don't want to have the watchdog timeout during tests
+#
+CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=n
+CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=n
+
+#
+# Compiler options
+#
+CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y
+CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y
+CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2
+CONFIG_COMPILER_HIDE_PATHS_MACROS=y
+CONFIG_COMPILER_STACK_CHECK_MODE_NORM=y
+CONFIG_COMPILER_STACK_CHECK=y
+
+#
+# Partition Table
+#
+# CONFIG_PARTITION_TABLE_SINGLE_APP is not set
+CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE=y
+# CONFIG_PARTITION_TABLE_TWO_OTA is not set
+# CONFIG_PARTITION_TABLE_CUSTOM is not set
+CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
+CONFIG_PARTITION_TABLE_FILENAME="partitions_singleapp_large.csv"
+CONFIG_PARTITION_TABLE_OFFSET=0x8000
+CONFIG_PARTITION_TABLE_MD5=y
+# end of Partition Table

IDE/Espressif/ESP-IDF/examples/wolfssl_client/README.md

@@ -2,21 +2,26 @@
 
 The Example contains of wolfSSL tls client demo.
 
-1. "make menuconfig" to config the project  
-    1-1. Example Configuration ->
+1. `idf.py menuconfig` to config the project
+
+      1-1. Example Configuration ->  
 
-          WIFI SSID: your own WIFI, which is connected to the Internet.(default is "myssid")  
-          WIFI Password: WIFI password, and default is "mypassword"  
           Target host ip address : the host that you want to connect to.(default is 127.0.0.1)
+
+     1-2. Example Connection Configuration ->
+     
+          WIFI SSID: your own WIFI, which is connected to the Internet.(default is "myssid")  
+          WIFI Password: WIFI password, and default is "mypassword"
+    
     
     Note: the example program uses 11111 port. If you want to use different port  
         , you need to modify DEFAULT_PORT definition in the code.
 
 When you want to test the wolfSSL client
 
-1. "make flash monitor" to load the firmware and see the context  
+1. `idf.py -p <PORT> flash` and then `idf.py monitor` to load the firmware and see the context  
 2. You can use <wolfssl>/examples/server/server program for test.  
 
-         e.g. Launch ./examples/server/server -v 4 -b -i
+         e.g. Launch ./examples/server/server -v 4 -b -i -d
 
 See the README.md file in the upper level 'examples' directory for more information about examples.

IDE/Espressif/ESP-IDF/examples/wolfssl_client/VisualGDB/VisualGDB_wolfssl_client.sln

@@ -0,0 +1,31 @@
+
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio Version 16
+VisualStudioVersion = 16.0.33027.164
+MinimumVisualStudioVersion = 10.0.40219.1
+Project("{803FD0C6-D64E-4E16-9DC3-1DAEC859A3D2}") = "VisualGDB_wolfssl_client", "VisualGDB_wolfssl_client.vgdbproj", "{E903E9CC-1A23-4B00-8914-7E45EC21E351}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|VisualGDB = Debug|VisualGDB
+		Release|VisualGDB = Release|VisualGDB
+		Tests (Debug)|VisualGDB = Tests (Debug)|VisualGDB
+		Tests (Release)|VisualGDB = Tests (Release)|VisualGDB
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{E903E9CC-1A23-4B00-8914-7E45EC21E351}.Debug|VisualGDB.ActiveCfg = Debug|VisualGDB
+		{E903E9CC-1A23-4B00-8914-7E45EC21E351}.Debug|VisualGDB.Build.0 = Debug|VisualGDB
+		{E903E9CC-1A23-4B00-8914-7E45EC21E351}.Release|VisualGDB.ActiveCfg = Release|VisualGDB
+		{E903E9CC-1A23-4B00-8914-7E45EC21E351}.Release|VisualGDB.Build.0 = Release|VisualGDB
+		{E903E9CC-1A23-4B00-8914-7E45EC21E351}.Tests (Debug)|VisualGDB.ActiveCfg = Tests (Debug)|VisualGDB
+		{E903E9CC-1A23-4B00-8914-7E45EC21E351}.Tests (Debug)|VisualGDB.Build.0 = Tests (Debug)|VisualGDB
+		{E903E9CC-1A23-4B00-8914-7E45EC21E351}.Tests (Release)|VisualGDB.ActiveCfg = Tests (Release)|VisualGDB
+		{E903E9CC-1A23-4B00-8914-7E45EC21E351}.Tests (Release)|VisualGDB.Build.0 = Tests (Release)|VisualGDB
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+		SolutionGuid = {D510376F-F313-4EF6-8EF5-248D1949DFEB}
+	EndGlobalSection
+EndGlobal

IDE/Espressif/ESP-IDF/examples/wolfssl_client/VisualGDB/VisualGDB_wolfssl_client.vgdbproj

@@ -0,0 +1,269 @@
+<?xml version="1.0"?>
+<VisualGDBProjectSettings2 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
+  <Project xsi:type="com.visualgdb.project.external.esp-idf">
+    <CustomSourceDirectories>
+      <Directories />
+      <PathStyle>Unknown</PathStyle>
+    </CustomSourceDirectories>
+    <AutoProgramSPIFFSPartition>true</AutoProgramSPIFFSPartition>
+    <ProjectModeSettings>
+      <ProjectGUID>bdbba681-1213-45f8-a44e-4652fe489fe3</ProjectGUID>
+      <GroupSourcesByTypes>true</GroupSourcesByTypes>
+      <GroupSourcesByPaths>true</GroupSourcesByPaths>
+      <HeaderScanMode>SourceDirs</HeaderScanMode>
+    </ProjectModeSettings>
+  </Project>
+  <Build xsi:type="com.visualgdb.build.cmake">
+    <BuildLogMode xsi:nil="true" />
+    <ToolchainID>
+      <ID>com.visualgdb.xtensa-esp32-elf</ID>
+      <Version>
+        <GCC>11.2.0</GCC>
+        <GDB>9.2.90</GDB>
+        <Revision>2</Revision>
+      </Version>
+    </ToolchainID>
+    <RelativeSourceDirectory>..</RelativeSourceDirectory>
+    <ConfigurationType>DEBUG</ConfigurationType>
+    <BinaryDirectory>build/$(PlatformName)/$(ConfigurationName)</BinaryDirectory>
+    <MakeCommandTemplate>
+      <SkipWhenRunningCommandList>false</SkipWhenRunningCommandList>
+      <Command>$(ToolchainNinja)</Command>
+      <WorkingDirectory>$(BuildDir)</WorkingDirectory>
+      <BackgroundMode xsi:nil="true" />
+    </MakeCommandTemplate>
+    <CMakeCommand>
+      <SkipWhenRunningCommandList>false</SkipWhenRunningCommandList>
+      <Command>$(SYSPROGS_CMAKE_PATH)</Command>
+      <BackgroundMode xsi:nil="true" />
+    </CMakeCommand>
+    <UpdateSourcesInCMakeFile>true</UpdateSourcesInCMakeFile>
+    <ExportCompileCommands>false</ExportCompileCommands>
+    <DisableToolchainFile>false</DisableToolchainFile>
+    <CMakeMakefileType>Ninja</CMakeMakefileType>
+    <DeployAsRoot>false</DeployAsRoot>
+    <CMakeCleanMode>RemoveBuildDirectory</CMakeCleanMode>
+    <UseCCache>false</UseCCache>
+    <ProjectModeSettings>
+      <ProjectItemSettings>
+        <GroupSourcesByTypes>true</GroupSourcesByTypes>
+        <GroupSourcesByPaths>true</GroupSourcesByPaths>
+        <GroupTargetsByPaths>true</GroupTargetsByPaths>
+        <FollowCMakeSourceGroups>false</FollowCMakeSourceGroups>
+        <AutoRefreshProject>true</AutoRefreshProject>
+        <AlwaysConsiderOutdated>false</AlwaysConsiderOutdated>
+        <SortTargetsByName>true</SortTargetsByName>
+        <RedundantTargetMode>HideOuterProjectTargets</RedundantTargetMode>
+        <SortSourcesByName>true</SortSourcesByName>
+        <BuildAllTargetsInSubdir>false</BuildAllTargetsInSubdir>
+        <FoldSingleItemPathLevels>true</FoldSingleItemPathLevels>
+      </ProjectItemSettings>
+      <TargetSpecificSettings />
+      <SetLDLibraryPathFromDependentArtifacts>true</SetLDLibraryPathFromDependentArtifacts>
+      <ProjectGUID>e903e9cc-1a23-4b00-8914-7e45ec21e351</ProjectGUID>
+      <VirtualFolders />
+      <ConfigurationNameCase>Upper</ConfigurationNameCase>
+      <DefaultHeaderDiscoveryMode>HeaderDirectoryAndSubdirectories</DefaultHeaderDiscoveryMode>
+      <EnableFastUpToDateCheck>true</EnableFastUpToDateCheck>
+      <ESPIDFExtension>
+        <IDFCheckout>
+          <Version>release/v5.0</Version>
+          <Subdirectory>esp-idf/v5.0</Subdirectory>
+          <Type>ESPIDF</Type>
+        </IDFCheckout>
+        <COMPort>COM20</COMPort>
+        <SuppressTestPrerequisiteChecks>false</SuppressTestPrerequisiteChecks>
+        <UseCCache>false</UseCCache>
+        <DeviceID>ESP32</DeviceID>
+      </ESPIDFExtension>
+    </ProjectModeSettings>
+  </Build>
+  <CustomBuild>
+    <PreSyncActions />
+    <PreBuildActions />
+    <PostBuildActions />
+    <PreCleanActions />
+    <PostCleanActions />
+  </CustomBuild>
+  <CustomDebug>
+    <PreDebugActions />
+    <PostDebugActions />
+    <DebugStopActions />
+    <BreakMode>Default</BreakMode>
+  </CustomDebug>
+  <DeviceTerminalSettings>
+    <Connection xsi:type="com.sysprogs.terminal.connection.serial">
+      <ComPortName>COM20</ComPortName>
+      <AdvancedSettings>
+        <BaudRate>115200</BaudRate>
+        <DataBits>8</DataBits>
+        <Parity>None</Parity>
+        <StopBits>One</StopBits>
+        <FlowControl>None</FlowControl>
+      </AdvancedSettings>
+    </Connection>
+    <LastConnectionTime>0</LastConnectionTime>
+    <EchoTypedCharacters>false</EchoTypedCharacters>
+    <ClearContentsWhenReconnecting>false</ClearContentsWhenReconnecting>
+    <ReconnectAutomatically>false</ReconnectAutomatically>
+    <DisplayMode>ASCII</DisplayMode>
+    <Colors>
+      <Background>
+        <Alpha>255</Alpha>
+        <Red>0</Red>
+        <Green>0</Green>
+        <Blue>0</Blue>
+      </Background>
+      <Disconnected>
+        <Alpha>255</Alpha>
+        <Red>169</Red>
+        <Green>169</Green>
+        <Blue>169</Blue>
+      </Disconnected>
+      <Text>
+        <Alpha>255</Alpha>
+        <Red>211</Red>
+        <Green>211</Green>
+        <Blue>211</Blue>
+      </Text>
+      <Echo>
+        <Alpha>255</Alpha>
+        <Red>144</Red>
+        <Green>238</Green>
+        <Blue>144</Blue>
+      </Echo>
+      <Inactive>
+        <Alpha>255</Alpha>
+        <Red>169</Red>
+        <Green>169</Green>
+        <Blue>169</Blue>
+      </Inactive>
+    </Colors>
+    <HexSettings>
+      <MaximumBytesPerLine>16</MaximumBytesPerLine>
+      <ShowTextView>true</ShowTextView>
+      <BreaksAroundEcho>true</BreaksAroundEcho>
+      <AutoSend>true</AutoSend>
+      <SendAsHex>true</SendAsHex>
+      <TimeoutForAutoBreak>0</TimeoutForAutoBreak>
+    </HexSettings>
+    <LineEnding>LF</LineEnding>
+    <TreatLFAsCRLF>false</TreatLFAsCRLF>
+    <KeepOpenAfterExit>false</KeepOpenAfterExit>
+    <ShowAfterProgramming>false</ShowAfterProgramming>
+  </DeviceTerminalSettings>
+  <CustomShortcuts>
+    <Shortcuts />
+    <ShowMessageAfterExecuting>true</ShowMessageAfterExecuting>
+  </CustomShortcuts>
+  <UserDefinedVariables />
+  <ImportedPropertySheets />
+  <CodeSense>
+    <Enabled>Unknown</Enabled>
+    <ExtraSettings>
+      <HideErrorsInSystemHeaders>true</HideErrorsInSystemHeaders>
+      <SupportLightweightReferenceAnalysis>true</SupportLightweightReferenceAnalysis>
+      <CheckForClangFormatFiles>true</CheckForClangFormatFiles>
+      <FormattingEngine xsi:nil="true" />
+    </ExtraSettings>
+    <CodeAnalyzerSettings>
+      <Enabled>false</Enabled>
+    </CodeAnalyzerSettings>
+  </CodeSense>
+  <Configurations>
+    <VisualGDBConfiguration>
+      <Name>Debug</Name>
+      <BuildSettingsExtension xsi:type="com.visualgdb.build.external.esp-idf.cmake.extension" />
+    </VisualGDBConfiguration>
+    <VisualGDBConfiguration>
+      <Name>Release</Name>
+      <BuildSettingsExtension xsi:type="com.visualgdb.build.external.esp-idf.cmake.extension" />
+    </VisualGDBConfiguration>
+  </Configurations>
+  <ProgramArgumentsSuggestions />
+  <Debug xsi:type="com.visualgdb.debug.embedded">
+    <AdditionalStartupCommands />
+    <AdditionalGDBSettings>
+      <Features>
+        <DisableAutoDetection>false</DisableAutoDetection>
+        <UseFrameParameter>false</UseFrameParameter>
+        <SimpleValuesFlagSupported>false</SimpleValuesFlagSupported>
+        <ListLocalsSupported>false</ListLocalsSupported>
+        <ByteLevelMemoryCommandsAvailable>false</ByteLevelMemoryCommandsAvailable>
+        <ThreadInfoSupported>false</ThreadInfoSupported>
+        <PendingBreakpointsSupported>false</PendingBreakpointsSupported>
+        <SupportTargetCommand>false</SupportTargetCommand>
+        <ReliableBreakpointNotifications>false</ReliableBreakpointNotifications>
+      </Features>
+      <EnableSmartStepping>false</EnableSmartStepping>
+      <FilterSpuriousStoppedNotifications>false</FilterSpuriousStoppedNotifications>
+      <ForceSingleThreadedMode>false</ForceSingleThreadedMode>
+      <UseAppleExtensions>false</UseAppleExtensions>
+      <CanAcceptCommandsWhileRunning>false</CanAcceptCommandsWhileRunning>
+      <MakeLogFile>false</MakeLogFile>
+      <IgnoreModuleEventsWhileStepping>true</IgnoreModuleEventsWhileStepping>
+      <UseRelativePathsOnly>false</UseRelativePathsOnly>
+      <ExitAction>None</ExitAction>
+      <DisableDisassembly>false</DisableDisassembly>
+      <ExamineMemoryWithXCommand>false</ExamineMemoryWithXCommand>
+      <StepIntoNewInstanceEntry>app_main</StepIntoNewInstanceEntry>
+      <ExamineRegistersInRawFormat>true</ExamineRegistersInRawFormat>
+      <DisableSignals>false</DisableSignals>
+      <EnableAsyncExecutionMode>false</EnableAsyncExecutionMode>
+      <AsyncModeSupportsBreakpoints>true</AsyncModeSupportsBreakpoints>
+      <TemporaryBreakConsolidationTimeout>0</TemporaryBreakConsolidationTimeout>
+      <EnableNonStopMode>false</EnableNonStopMode>
+      <MaxBreakpointLimit>0</MaxBreakpointLimit>
+      <EnableVerboseMode>true</EnableVerboseMode>
+      <EnablePrettyPrinters>false</EnablePrettyPrinters>
+    </AdditionalGDBSettings>
+    <DebugMethod>
+      <ID>openocd</ID>
+      <Configuration xsi:type="com.visualgdb.edp.openocd.settings.esp32">
+        <CommandLine>-f interface/tigard.cfg -c "adapter_khz 3000" -f target/esp32.cfg</CommandLine>
+        <ExtraParameters>
+          <Frequency xsi:nil="true" />
+          <BoostedFrequency xsi:nil="true" />
+          <ConnectUnderReset>false</ConnectUnderReset>
+        </ExtraParameters>
+        <LoadProgressGUIThreshold>131072</LoadProgressGUIThreshold>
+        <ProgramMode>Enabled</ProgramMode>
+        <StartupCommands>
+          <string>set remotetimeout 60</string>
+          <string>target remote :$$SYS:GDB_PORT$$</string>
+          <string>mon gdb_breakpoint_override hard</string>
+          <string>mon reset halt</string>
+          <string>load</string>
+        </StartupCommands>
+        <ProgramFLASHUsingExternalTool>false</ProgramFLASHUsingExternalTool>
+        <PreferredGDBPort>0</PreferredGDBPort>
+        <PreferredTelnetPort>0</PreferredTelnetPort>
+        <AlwaysPassSerialNumber>false</AlwaysPassSerialNumber>
+        <SelectedCoreIndex xsi:nil="true" />
+        <LiveMemoryTimeout>5000</LiveMemoryTimeout>
+        <SuggestionLogicRevision>1</SuggestionLogicRevision>
+        <CheckFLASHSize>true</CheckFLASHSize>
+        <FLASHSettings>
+          <Size>size2MB</Size>
+          <Frequency>freq40M</Frequency>
+          <Mode>DIO</Mode>
+        </FLASHSettings>
+        <PatchBootloader>true</PatchBootloader>
+      </Configuration>
+    </DebugMethod>
+    <AutoDetectRTOS>true</AutoDetectRTOS>
+    <SemihostingSupport>Auto</SemihostingSupport>
+    <SemihostingPollingDelay>0</SemihostingPollingDelay>
+    <StepIntoEntryPoint>false</StepIntoEntryPoint>
+    <ReloadFirmwareOnReset>false</ReloadFirmwareOnReset>
+    <ValidateEndOfStackAddress>true</ValidateEndOfStackAddress>
+    <StopAtEntryPoint>false</StopAtEntryPoint>
+    <EnableVirtualHalts>false</EnableVirtualHalts>
+    <DynamicAnalysisSettings />
+    <EndOfStackSymbol>_estack</EndOfStackSymbol>
+    <TimestampProviderTicksPerSecond>0</TimestampProviderTicksPerSecond>
+    <KeepConsoleAfterExit>false</KeepConsoleAfterExit>
+    <UnusedStackFillPattern xsi:nil="true" />
+    <CheckInterfaceDrivers>true</CheckInterfaceDrivers>
+  </Debug>
+</VisualGDBProjectSettings2>

IDE/Espressif/ESP-IDF/examples/wolfssl_client/components/wolfssl/CMakeLists.txt

@@ -0,0 +1,229 @@
+#
+#  Copyright (C) 2006-2023 wolfSSL Inc.
+#
+#  This file is part of wolfSSL.
+#
+#  wolfSSL is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  wolfSSL is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, write to the Free Software
+#  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
+#
+# cmake for wolfssl
+#
+cmake_minimum_required(VERSION 3.5)
+set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_USER_SETTINGS")
+set(CMAKE_CURRENT_SOURCE_DIR ".")
+
+# We are currently in [root]/IDE/Espressif/ESP-IDF/examples/wolfssl_test/components/wolfssl
+# The root of wolfSSL is 7 directories up from here:
+get_filename_component(WOLFSSL_ROOT  "../../../../../../../" ABSOLUTE)
+
+# Espressif may take several passes through this makefile. Check to see if we found IDF
+string(COMPARE EQUAL "${PROJECT_SOURCE_DIR}" "" WOLFSSL_FOUND_IDF)
+
+if($WOLFSSL_FOUND_IDF)
+    message(STATUS "IDF_PATH = $ENV{IDF_PATH}")
+    message(STATUS "WOLFSSL_ROOT = ${WOLFSSL_ROOT}")
+    message(STATUS "PROJECT_SOURCE_DIR = ${PROJECT_SOURCE_DIR}")
+endif()
+
+# get a list of all wolfcrypt assembly files; we'll exclude them as they don't target Xtensa
+FILE(GLOB EXCLUDE_ASM *.S)
+file(GLOB_RECURSE EXCLUDE_ASM ${CMAKE_SOURCE_DIR} "${WOLFSSL_ROOT}/wolfcrypt/src/*.S")
+
+if(NOT CMAKE_BUILD_EARLY_EXPANSION)
+    message(STATUS "EXCLUDE_ASM = ${EXCLUDE_ASM}")
+endif()
+
+set(INCLUDE_PATH ${WOLFSSL_ROOT})
+
+set(COMPONENT_SRCDIRS "${WOLFSSL_ROOT}/src/"
+                        "${WOLFSSL_ROOT}/wolfcrypt/src/"
+                        "${WOLFSSL_ROOT}/wolfcrypt/src/port/Espressif/"
+                        "${WOLFSSL_ROOT}/wolfcrypt/src/port/atmel/"
+                        "${WOLFSSL_ROOT}/wolfcrypt/benchmark/"
+                        "${WOLFSSL_ROOT}/wolfcrypt/test/"
+                        )
+
+set(COMPONENT_REQUIRES lwip)
+
+
+# check to see if there's both a local copy and EDP-IDF copy of the wolfssl and/or wolfssh components
+if( EXISTS "${CMAKE_HOME_DIRECTORY}/components/wolfssl/" AND EXISTS "$ENV{IDF_PATH}/components/wolfssl/" )
+    #
+    # wolfSSL found in both ESP-IDF and local project - needs to be resolved by user
+    #
+    message(STATUS "")
+    message(STATUS "**************************************************************************************")
+    message(STATUS "")
+    message(STATUS "Error: Found components/wolfssl in both local project and IDF_PATH")
+    message(STATUS "")
+    message(STATUS "To proceed: ")
+    message(STATUS "")
+    message(STATUS "Remove either the local project component: ${CMAKE_HOME_DIRECTORY}/components/wolfssl/ ")
+    message(STATUS "or the Espressif shared component installed at: $ENV{IDF_PATH}/components/wolfssl/ ")
+    message(STATUS "")
+    message(FATAL_ERROR "Please use wolfSSL in either local project or Espressif components, but not both.")
+    message(STATUS "")
+    message(STATUS "**************************************************************************************")
+    message(STATUS "")
+
+    # Optional: if you change the above FATAL_ERROR to STATUS you can warn at runtime with this macro definition:
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_MULTI_INSTALL_WARNING")
+
+else()
+    if( EXISTS "$ENV{IDF_PATH}/components/wolfssl/" )
+        #
+        # wolfSSL found in ESP-IDF components and is assumed to be already configured in user_settings.h via setup.
+        #
+        message(STATUS "")
+        message(STATUS "Using components/wolfssl in IDF_PATH = $ENV{IDF_PATH}")
+        message(STATUS "")
+    else()
+        #
+        # wolfSSL is not an ESP-IDF component. We need to now determine if it is local and if so if it is part of the wolfSSL repo
+        # or if  wolfSSL is simply installed as a local component.
+        #
+        if( EXISTS "${CMAKE_HOME_DIRECTORY}/components/wolfssl/" )
+            #
+            # wolfSSL found in local project.
+            #
+            if( EXISTS "${CMAKE_HOME_DIRECTORY}/components/wolfssl/include/" )
+                message(STATUS "")
+                message(STATUS "Using installed project ./components/wolfssl in CMAKE_HOME_DIRECTORY = $ENV{CMAKE_HOME_DIRECTORY}")
+                message(STATUS "")
+                #
+                # Note we already checked above and confirmed there's not another wolfSSL installed in the ESP-IDF components.
+                #
+                # We won't do anything else here, as it will be assumed the original install completed successfully.
+                #
+            else()
+                #
+                # This is the developer repo mode. wolfSSL will be assume to be not installed to ESP-IDF nor local project
+                # In this configuration, we are likely running a wolfSSL example found directly in the repo.
+                #
+                message(STATUS "")
+                message(STATUS "Using developer repo ./components/wolfssl in CMAKE_HOME_DIRECTORY = $ENV{CMAKE_HOME_DIRECTORY}")
+                message(STATUS "")
+
+                message(STATUS "************************************************************************************************")
+                # When in developer mode, we are typically running wolfSSL examples such as benchmark or test directories.
+                # However, the as-cloned or distributed wolfSSL does not have the ./include/ directory, so we'll add it as needed.
+                #
+                # first check if there's a [root]/include/user_settings.h
+                if( EXISTS "${WOLFSSL_ROOT}/include/user_settings.h" )
+                    # we won't overwrite an existing user settings file, just note that we already have one:
+                    message(STATUS "Found wolfSSL user_settings.h in ${WOLFSSL_ROOT}/include/user_settings.h")
+                else()
+                    message(STATUS "Installing wolfSSL user_settings.h to ${WOLFSSL_ROOT}/include/user_settings.h")
+                    file(COPY "${WOLFSSL_ROOT}/IDE/Espressif/ESP-IDF/user_settings.h" DESTINATION "${WOLFSSL_ROOT}/include/")
+                endif() # user_settings.h
+
+                # next check if there's a [root]/include/config.h
+                if( EXISTS "${WOLFSSL_ROOT}/include/config.h" )
+                    message(STATUS "Found wolfSSL config.h in ${WOLFSSL_ROOT}/include/config.h")
+                else()
+                    message(STATUS "Installing wolfSSL config.h to ${WOLFSSL_ROOT}/include/config.h")
+                    file(COPY "${WOLFSSL_ROOT}/IDE/Espressif/ESP-IDF/dummy_config_h" DESTINATION "${WOLFSSL_ROOT}/include/")
+                    file(RENAME "${WOLFSSL_ROOT}/include/dummy_config_h" "${WOLFSSL_ROOT}/include/config.h")
+                endif() # config.h
+                message(STATUS "************************************************************************************************")
+                message(STATUS "")
+            endif()
+
+        else()
+            # we did not find a ./components/wolfssl/include/ directory from this pass of cmake.
+            if($WOLFSSL_FOUND_IDF)
+                message(STATUS "")
+                message(STATUS "WARNING: wolfSSL not found.")
+                message(STATUS "")
+            else()
+                # probably needs to be re-parsed by Espressif
+                message(STATUS "wolfSSL found IDF. Project Source:${PROJECT_SOURCE_DIR}")
+            endif() # else we have not found ESP-IDF yet
+        endif() # else not a local wolfSSL component
+
+    endif() #else not an ESP-IDF component
+endif() # else not local copy and EDP-IDF wolfSSL
+
+
+# RTOS_IDF_PATH is typically:
+# "/Users/{username}/Desktop/esp-idf/components/freertos/include/freertos"
+# depending on the environment, we may need to swap backslashes with forward slashes
+string(REPLACE "\\" "/" RTOS_IDF_PATH "$ENV{IDF_PATH}/components/freertos/include/freertos")
+
+# ESP-IDF after version 4.4x has a different RTOS directory structure
+string(REPLACE "\\" "/" RTOS_IDF_PATH5 "$ENV{IDF_PATH}/components/freertos/FreeRTOS-Kernel/include/freertos")
+
+if(IS_DIRECTORY ${IDF_PATH}/components/freertos/FreeRTOS-Kernel/)
+    set(COMPONENT_ADD_INCLUDEDIRS
+        "."
+       "${WOLFSSL_ROOT}/include"
+       "${RTOS_IDF_PATH5}"
+       "${WOLFSSL_ROOT}"
+       )
+else()
+
+   set(COMPONENT_ADD_INCLUDEDIRS
+       "."
+       "${WOLFSSL_ROOT}/include"
+       "${RTOS_IDF_PATH}"
+       "${WOLFSSL_ROOT}"
+      )
+endif()
+
+if(IS_DIRECTORY ${IDF_PATH}/components/cryptoauthlib)
+    list(APPEND COMPONENT_ADD_INCLUDEDIRS "../cryptoauthlib/lib")
+endif()
+
+set(COMPONENT_SRCEXCLUDE
+    "${WOLFSSL_ROOT}/src/bio.c"
+    "${WOLFSSL_ROOT}/src/conf.c"
+    "${WOLFSSL_ROOT}/src/misc.c"
+    "${WOLFSSL_ROOT}/src/pk.c"
+    "${WOLFSSL_ROOT}/src/ssl_misc.c" # included by ssl.c
+    "${WOLFSSL_ROOT}/src/x509.c"
+    "${WOLFSSL_ROOT}/src/x509_str.c"
+    "${WOLFSSL_ROOT}/wolfcrypt/src/evp.c"
+    "${WOLFSSL_ROOT}/wolfcrypt/src/misc.c"
+    "${EXCLUDE_ASM}"
+    )
+
+register_component()
+
+# some optional diagnostics
+if (0)
+    get_cmake_property(_variableNames VARIABLES)
+    list (SORT _variableNames)
+    message(STATUS "")
+    message(STATUS "ALL VARIABLES BEGIN")
+    message(STATUS "")
+    foreach (_variableName ${_variableNames})
+        message(STATUS "${_variableName}=${${_variableName}}")
+    endforeach()
+    message(STATUS "")
+    message(STATUS "ALL VARIABLES END")
+    message(STATUS "")
+endif()
+
+# check to see if there's both a local copy and EDP-IDF copy of the wolfssl components
+if( EXISTS "${CMAKE_HOME_DIRECTORY}/components/wolfssl/" AND EXISTS "$ENV{IDF_PATH}/components/wolfssl/" )
+    message(STATUS "")
+    message(STATUS "")
+    message(STATUS "********************************************************************")
+    message(STATUS "WARNING: Found components/wolfssl in both local project and IDF_PATH")
+    message(STATUS "********************************************************************")
+    message(STATUS "")
+endif()
+# end multiple component check
+
+

IDE/Espressif/ESP-IDF/examples/wolfssl_client/components/wolfssl/component.mk

@@ -1,36 +1,40 @@
-# -*- coding: utf-8 -*-
-#
-# _memory.py
-#
-# Copyright (C) 2006-2021 wolfSSL Inc.
-#
-# This file is part of wolfSSL.
-#
-# wolfSSL is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# wolfSSL is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
-#/
-#/
-
-# pylint: disable=missing-docstring
-
-try:
-    from wolfssl._ffi import ffi as _ffi
-    from wolfssl._ffi import lib as _lib
-except ImportError:
-    pass
-
-_DYNAMIC_TYPE_METHOD = 11
-
-def _native_free(native_object, dynamic_type):
-    _lib.wolfSSL_Free(native_object, _ffi.NULL, dynamic_type)
+#
+# Copyright (C) 2006-2023 wolfSSL Inc.
+#
+# This file is part of wolfSSL.
+#
+# wolfSSL is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# wolfSSL is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
+#
+#
+# Component Makefile
+#
+
+COMPONENT_ADD_INCLUDEDIRS := . ./include
+
+COMPONENT_ADD_INCLUDEDIRS += "$ENV{IDF_PATH}/components/freertos/include/freertos"
+# COMPONENT_ADD_INCLUDEDIRS += "$ENV{IDF_PATH}/soc/esp32s3/include/soc"
+
+COMPONENT_SRCDIRS := src wolfcrypt/src
+COMPONENT_SRCDIRS += wolfcrypt/src/port/Espressif
+COMPONENT_SRCDIRS += wolfcrypt/src/port/atmel
+COMPONENT_SRCDIRS += wolfcrypt/benchmark
+COMPONENT_SRCDIRS += wolfcrypt/test
+
+CFLAGS +=-DWOLFSSL_USER_SETTINGS
+
+COMPONENT_OBJEXCLUDE := wolfcrypt/src/aes_asm.o
+COMPONENT_OBJEXCLUDE += wolfcrypt/src/evp.o
+COMPONENT_OBJEXCLUDE += wolfcrypt/src/misc.o
+COMPONENT_OBJEXCLUDE += src/bio.o

IDE/Espressif/ESP-IDF/examples/wolfssl_client/main/CMakeLists.txt

@@ -7,4 +7,69 @@ set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_USER_SETTINGS")
 set(COMPONENT_SRCS "client-tls.c" "wifi_connect.c")
 set(COMPONENT_ADD_INCLUDEDIRS "." "./include")
 
+set (git_cmd "git")
+
+if( EXISTS "${CMAKE_HOME_DIRECTORY}/components/wolfssl/" AND EXISTS "$ENV{IDF_PATH}/components/wolfssl/" )
+    #
+    # wolfSSL found in both ESP-IDF and local project - needs to be resolved by user
+    #
+    message(STATUS "")
+    message(STATUS "WARNING: Found components/wolfssl in both local project and IDF_PATH")
+    message(STATUS "")
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_MULTI_INSTALL_WARNING")
+endif()
+
 register_component()
+
+#
+# LIBWOLFSSL_SAVE_INFO(VAR_OUPUT THIS_VAR VAR_RESULT)
+#
+# Save the THIS_VAR as a string in a macro called VAR_OUPUT
+#
+# VAR_OUPUT:  the name of the macro to define
+# THIS_VAR:   the OUTPUT_VARIABLE result from a execute_process()
+# VAR_RESULT: the RESULT_VARIABLE from a execute_process(); "0" if successful.
+#
+function ( LIBWOLFSSL_SAVE_INFO VAR_OUPUT THIS_VAR VAR_RESULT )
+    # is the RESULT_VARIABLE output value 0? If so, IS_VALID_VALUE is true.
+    string(COMPARE EQUAL "${VAR_RESULT}" "0" IS_VALID_VALUE)
+
+    # if we had a successful operation, save the THIS_VAR in VAR_OUPUT
+    if(${IS_VALID_VALUE})
+        # strip newline chars in THIS_VAR parameter and save in VAR_VALUE
+        string(REPLACE "\n" ""  VAR_VALUE  ${THIS_VAR})
+
+        # we'll could percolate the value to the parent for possible later use
+        # set(${VAR_OUPUT} ${VAR_VALUE} PARENT_SCOPE)
+
+        # but we're only using it here in this function
+        set(${VAR_OUPUT} ${VAR_VALUE})
+
+        # we'll print what we found to the console
+        message(STATUS "Found ${VAR_OUPUT}=${VAR_VALUE}")
+
+        # the interesting part is defining the VAR_OUPUT name a value to use in the app
+        add_definitions(-D${VAR_OUPUT}=\"${VAR_VALUE}\")
+    else()
+        # if we get here, check the execute_process command and parameters.
+        message(STATUS "LIBWOLFSSL_SAVE_INFO encountered a non-zero VAR_RESULT")
+        set(${VAR_OUPUT} "Unknown")
+    endif()
+endfunction() # LIBWOLFSSL_SAVE_INFO
+
+if(NOT CMAKE_BUILD_EARLY_EXPANSION)
+    # LIBWOLFSSL_VERSION_GIT_HASH
+    execute_process(COMMAND ${git_cmd} "rev-parse" "HEAD" OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET )
+    LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_GIT_HASH "${TMP_OUT}" "${TMP_RES}")
+
+    # LIBWOLFSSL_VERSION_GIT_SHORT_HASH
+    execute_process(COMMAND ${git_cmd} "rev-parse" "--short" "HEAD" OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES ERROR_QUIET )
+    LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_GIT_SHORT_HASH "${TMP_OUT}" "${TMP_RES}")
+
+    # LIBWOLFSSL_VERSION_GIT_HASH_DATE
+    execute_process(COMMAND ${git_cmd} "show" "--no-patch" "--no-notes" "--pretty=\'\%cd\'" OUTPUT_VARIABLE TMP_OUT RESULT_VARIABLE TMP_RES  )
+    LIBWOLFSSL_SAVE_INFO(LIBWOLFSSL_VERSION_GIT_HASH_DATE "${TMP_OUT}" "${TMP_RES}")
+endif()
+
+message(STATUS "")
+

IDE/Espressif/ESP-IDF/examples/wolfssl_client/main/Kconfig.projbuild

@@ -1,17 +1,5 @@
 menu "Example Configuration"
 
-config WIFI_SSID
-    string "WiFi SSID"
-    default "myssid"
-    help
-        SSID (network name) for the example to connect to.
-
-config WIFI_PASSWORD
-    string "WiFi Password"
-    default "mypassword"
-    help
-        WiFi password (WPA or WPA2) for the example to use.
-
 config TARGET_HOST
     string "Target host"
     default "127.0.01.1"

IDE/Espressif/ESP-IDF/examples/wolfssl_client/main/client-tls.c

@@ -1,6 +1,6 @@
 /* client-tls-callback.c
  *
- * Copyright (C) 2006-2021 wolfSSL Inc.
+ * Copyright (C) 2006-2023 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/Espressif/ESP-IDF/examples/wolfssl_client/main/include/wifi_connect.h

@@ -1,6 +1,6 @@
 /* user_settings.h
  *
- * Copyright (C) 2006-2021 wolfSSL Inc.
+ * Copyright (C) 2006-2023 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *
@@ -25,9 +25,9 @@
 #include "esp_log.h"
 #include "esp_wifi.h"
 #if ESP_IDF_VERSION_MAJOR >= 4
-#include "esp_event.h"
+    #include "esp_event.h"
 #else
-#include "esp_event_loop.h"
+    #include "esp_event_loop.h"
 #endif
 
 #define DEFAULT_PORT                     11111

IDE/Espressif/ESP-IDF/examples/wolfssl_client/main/wifi_connect.c

@@ -1,6 +1,6 @@
 /* wifi_connect.c
  *
- * Copyright (C) 2006-2021 wolfSSL Inc.
+ * Copyright (C) 2006-2023 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *
@@ -27,21 +27,28 @@
 #include "lwip/netdb.h"
 #include "lwip/apps/sntp.h"
 #include "nvs_flash.h"
-#if ESP_IDF_VERSION_MAJOR >= 4
-#include "protocol_examples_common.h"
+
+/* wolfSSL */
+#include <wolfssl/wolfcrypt/settings.h>
+#include <user_settings.h>
+#include <wolfssl/version.h>
+#ifndef WOLFSSL_ESPIDF
+    #warning "problem with wolfSSL user_settings. Check components/wolfssl/include"
+#endif
+
+#if ESP_IDF_VERSION_MAJOR >= 4
+    #include "protocol_examples_common.h"
+#else
+    const static int CONNECTED_BIT = BIT0;
+    static EventGroupHandle_t wifi_event_group;
 #endif
 
-const static int CONNECTED_BIT = BIT0;
-static EventGroupHandle_t wifi_event_group;
 /* proto-type */
 extern void tls_smp_client_task();
 static void tls_smp_client_init();
 
 const static char *TAG = "tls_client";
 
-static EventGroupHandle_t wifi_event_group;
-extern void tls_smp_client_task();
-
 static void set_time()
 {
     /* set dummy wallclock time. */
@@ -54,7 +61,7 @@ static void set_time()
     /* please update the time if seeing unknown failure when loading cert.  */
     /* this could cause TLS communication failure due to time expiration    */
     /* incleasing 31536000 seconds is close to spend 356 days.              */
-    utctime.tv_sec = 1619650800; /* dummy time: Wed April 28 23:00:00 2021 */
+    utctime.tv_sec = 1645797600; /* dummy time: Fri 25 Feb 2022 02:00:00 2022 */
     utctime.tv_usec = 0;
     tz.tz_minuteswest = 0;
     tz.tz_dsttime = 0;
@@ -80,7 +87,11 @@ static void set_time()
 static void tls_smp_client_init(void)
 {
     int ret;
-    xTaskHandle _handle;
+#if ESP_IDF_VERSION_MAJOR >= 4
+        TaskHandle_t _handle;
+#else
+        xTaskHandle _handle;
+#endif
     /* http://esp32.info/docs/esp_idf/html/dd/d3c/group__xTaskCreate.html */
     ret = xTaskCreate(tls_smp_client_task,
                       TLS_SMP_CLIENT_TASK_NAME,
@@ -93,6 +104,7 @@ static void tls_smp_client_init(void)
         ESP_LOGI(TAG, "create thread %s failed", TLS_SMP_CLIENT_TASK_NAME);
     }
 }
+#if ESP_IDF_VERSION_MAJOR < 4
 /* event handler for wifi events */
 static esp_err_t wifi_event_handler(void *ctx, system_event_t *event)
 {
@@ -102,8 +114,13 @@ static esp_err_t wifi_event_handler(void *ctx, system_event_t *event)
         esp_wifi_connect();
         break;
     case SYSTEM_EVENT_STA_GOT_IP:
+    #if ESP_IDF_VERSION_MAJOR >= 4
+        ESP_LOGI(TAG, "got ip:" IPSTR "\n",
+                 IP2STR(&event->event_info.got_ip.ip_info.ip));
+    #else
         ESP_LOGI(TAG, "got ip:%s",
                  ip4addr_ntoa(&event->event_info.got_ip.ip_info.ip));
+    #endif
         /* http://esp32.info/docs/esp_idf/html/dd/d08/group__xEventGroupSetBits.html */
         xEventGroupSetBits(wifi_event_group, CONNECTED_BIT);
         break;
@@ -116,14 +133,63 @@ static esp_err_t wifi_event_handler(void *ctx, system_event_t *event)
     }
     return ESP_OK;
 }
+#endif
 /* entry point */
 void app_main(void)
 {
     ESP_LOGI(TAG, "Start app_main...");
+    ESP_LOGI(TAG, "--------------------------------------------------------");
+    ESP_LOGI(TAG, "--------------------------------------------------------");
+    ESP_LOGI(TAG, "---------------------- BEGIN MAIN ----------------------");
+    ESP_LOGI(TAG, "--------------------------------------------------------");
+    ESP_LOGI(TAG, "--------------------------------------------------------");
+    ESP_LOGI(TAG, "CONFIG_IDF_TARGET = %s", CONFIG_IDF_TARGET);
+    ESP_LOGI(TAG, "LIBWOLFSSL_VERSION_STRING = %s", LIBWOLFSSL_VERSION_STRING);
+
+#if defined(WOLFSSL_MULTI_INSTALL_WARNING)
+    ESP_LOGI(TAG, "");
+    ESP_LOGI(TAG, "WARNING: Multiple wolfSSL installs found.");
+    ESP_LOGI(TAG, "Check ESP-IDF and local project [components] directory.");
+    ESP_LOGI(TAG, "");
+#endif
+
+#if defined(LIBWOLFSSL_VERSION_GIT_HASH)
+    ESP_LOGI(TAG, "LIBWOLFSSL_VERSION_GIT_HASH = %s", LIBWOLFSSL_VERSION_GIT_HASH);
+#endif
+
+#if defined(LIBWOLFSSL_VERSION_GIT_SHORT_HASH )
+    ESP_LOGI(TAG, "LIBWOLFSSL_VERSION_GIT_SHORT_HASH = %s", LIBWOLFSSL_VERSION_GIT_SHORT_HASH);
+#endif
+
+#if defined(LIBWOLFSSL_VERSION_GIT_HASH_DATE)
+    ESP_LOGI(TAG, "LIBWOLFSSL_VERSION_GIT_HASH_DATE = %s", LIBWOLFSSL_VERSION_GIT_HASH_DATE);
+#endif
+
+
+    /* some interesting settings are target specific (ESP32, -C3, -S3, etc */
+#if defined(CONFIG_IDF_TARGET_ESP32C3)
+    /* not available for C3 at this time */
+#elif defined(CONFIG_IDF_TARGET_ESP32S3)
+    ESP_LOGI(TAG, "CONFIG_ESP32S3_DEFAULT_CPU_FREQ_MHZ = %u MHz",
+                   CONFIG_ESP32S3_DEFAULT_CPU_FREQ_MHZ
+             );
+    ESP_LOGI(TAG, "Xthal_have_ccount = %u", Xthal_have_ccount);
+#else
+    ESP_LOGI(TAG, "CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ = %u MHz",
+                   CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ
+            );
+    ESP_LOGI(TAG, "Xthal_have_ccount = %u", Xthal_have_ccount);
+#endif
+
+    /* all platforms: stack high water mark check */
+    ESP_LOGI(TAG, "Stack HWM: %d\n", uxTaskGetStackHighWaterMark(NULL));
+
+
     ESP_ERROR_CHECK(nvs_flash_init());
 
     ESP_LOGI(TAG, "Initialize wifi");
-#if ESP_IDF_VERSION_MAJOR >= 4 && ESP_IDF_VERSION_MINOR >= 1
+#if (ESP_IDF_VERSION_MAJOR == 4 && ESP_IDF_VERSION_MINOR >= 1) || \
+    (ESP_IDF_VERSION_MAJOR >= 5)
     esp_netif_init();
 #else
     tcpip_adapter_init();
@@ -131,7 +197,6 @@ void app_main(void)
 
     /* */
 #if ESP_IDF_VERSION_MAJOR >= 4
-    (void) wifi_event_handler;
    ESP_ERROR_CHECK(esp_event_loop_create_default());
    /* This helper function configures Wi-Fi or Ethernet, as selected in menuconfig.
    * Read "Establishing Wi-Fi or Ethernet Connection" section in

IDE/Espressif/ESP-IDF/examples/wolfssl_client/sdkconfig.defaults

@@ -0,0 +1,35 @@
+CONFIG_FREERTOS_HZ=1000
+CONFIG_ESP32_DEFAULT_CPU_FREQ_240=y
+
+#
+# Default main stack size
+#
+# This is typically way bigger than needed for stack size. See user_settings.h
+#
+CONFIG_ESP_MAIN_TASK_STACK_SIZE=55500
+
+# Legacy stack size for older ESP-IDF versions
+CONFIG_MAIN_TASK_STACK_SIZE=55500
+
+#
+# Compiler options
+#
+CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y
+CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y
+CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2
+CONFIG_COMPILER_HIDE_PATHS_MACROS=y
+CONFIG_COMPILER_STACK_CHECK_MODE_NORM=y
+CONFIG_COMPILER_STACK_CHECK=y
+
+#
+# Partition Table
+#
+# CONFIG_PARTITION_TABLE_SINGLE_APP is not set
+CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE=y
+# CONFIG_PARTITION_TABLE_TWO_OTA is not set
+# CONFIG_PARTITION_TABLE_CUSTOM is not set
+CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
+CONFIG_PARTITION_TABLE_FILENAME="partitions_singleapp_large.csv"
+CONFIG_PARTITION_TABLE_OFFSET=0x8000
+CONFIG_PARTITION_TABLE_MD5=y
+# end of Partition Table

IDE/Espressif/ESP-IDF/examples/wolfssl_server/README.md

@@ -1,17 +1,18 @@
-#wolfSSL Example
+# wolfSSL Server Example
 
 The Example contains a wolfSSL simple server.
 
-1. "make menuconfigure" to configure the project
+1. `idf.py menuconfigure` to configure the project
 
-    1-1. Example Configuration ->
+    1-1. Example Connection Configuration ->
+    
            WIFI SSID : your own WIFI, which is connected to the Internet.(default is "myssid")  
            WIFI Password : WIFI password, and default is "mypassword"
 
 When you want to test the wolfSSL simple server demo
 
-1. "make flash" to compile the code and load the firmware
-2. "make monitor" to see the context. The assigned IP address can be found in output message.
+1. `idf.py -p <PORT> flash` to compile the code and load the firmware
+2. `idf.py monitor` to see the context. The assigned IP address can be found in output message.
 3. Once the server connects to the wifi, it is waiting for client request.  
     ("Waiting for a connection..." message will be displayed.)
    
@@ -19,4 +20,3 @@ When you want to test the wolfSSL simple server demo
     e.g ./example/client/client -h xx.xx.xx
 
 See the README.md file in the upper level 'examples' directory for more information about examples.
-

IDE/Espressif/ESP-IDF/examples/wolfssl_server/VisualGDB/VisualGDB_wolfssl_server.sln

@@ -0,0 +1,31 @@
+
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio Version 16
+VisualStudioVersion = 16.0.33027.164
+MinimumVisualStudioVersion = 10.0.40219.1
+Project("{803FD0C6-D64E-4E16-9DC3-1DAEC859A3D2}") = "VisualGDB_wolfssl_server", "VisualGDB_wolfssl_server.vgdbproj", "{CD5A90CA-2D40-461A-A0C3-27654371BB00}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|VisualGDB = Debug|VisualGDB
+		Release|VisualGDB = Release|VisualGDB
+		Tests (Debug)|VisualGDB = Tests (Debug)|VisualGDB
+		Tests (Release)|VisualGDB = Tests (Release)|VisualGDB
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{CD5A90CA-2D40-461A-A0C3-27654371BB00}.Debug|VisualGDB.ActiveCfg = Debug|VisualGDB
+		{CD5A90CA-2D40-461A-A0C3-27654371BB00}.Debug|VisualGDB.Build.0 = Debug|VisualGDB
+		{CD5A90CA-2D40-461A-A0C3-27654371BB00}.Release|VisualGDB.ActiveCfg = Release|VisualGDB
+		{CD5A90CA-2D40-461A-A0C3-27654371BB00}.Release|VisualGDB.Build.0 = Release|VisualGDB
+		{CD5A90CA-2D40-461A-A0C3-27654371BB00}.Tests (Debug)|VisualGDB.ActiveCfg = Tests (Debug)|VisualGDB
+		{CD5A90CA-2D40-461A-A0C3-27654371BB00}.Tests (Debug)|VisualGDB.Build.0 = Tests (Debug)|VisualGDB
+		{CD5A90CA-2D40-461A-A0C3-27654371BB00}.Tests (Release)|VisualGDB.ActiveCfg = Tests (Release)|VisualGDB
+		{CD5A90CA-2D40-461A-A0C3-27654371BB00}.Tests (Release)|VisualGDB.Build.0 = Tests (Release)|VisualGDB
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+		SolutionGuid = {719A8CBE-E881-4B20-89F3-9910520E1067}
+	EndGlobalSection
+EndGlobal