1. Added the pair-wise consistency test to the RSA Key Gen.

2. Modified an RSA key size test case so it didn't try to make a key that was too big.

.gitignore

@@ -40,9 +40,10 @@ wolfssl-config
 cyassl.sublime*
 fips.h
 fips.c
-fipsv2.c
 fips_test.c
 fips
+wolfcrypt_first.c
+wolfcrypt_last.c
 selftest.c
 src/async.c
 wolfssl/async.h
@@ -223,6 +224,11 @@ wrapper/CSharp/x64/
 # Visual Studio Code Workspace Files
 *.vscode
 *.userprefs
+*.exe
+*.dll
+.vs
+Backup
+UpgradeLog.htm
 
 IDE/INTIME-RTOS/Debug_*
 IDE/VS-ARM/.vs

IDE/GCC-ARM/Header/user_settings.h

@@ -87,6 +87,11 @@ extern "C" {
         #undef  WC_NO_HARDEN
         #define WC_NO_HARDEN
     #endif
+
+    /* RSA PSS Support */
+    #if 0
+        #define WC_RSA_PSS
+    #endif
 #else
     #define NO_RSA
 #endif
@@ -378,6 +383,9 @@ extern unsigned int custom_rand_generate(void);
 #undef  NO_CRYPT_BENCHMARK
 //#define NO_CRYPT_BENCHMARK
 
+#undef  WOLFCRYPT_ONLY
+//#define WOLFCRYPT_ONLY
+
 /* In-lining of misc.c functions */
 /* If defined, must include wolfcrypt/src/misc.c in build */
 /* Slower, but about 1k smaller */

IDE/GCC-ARM/README.md

@@ -64,3 +64,4 @@ AES GCM: `GCM_SMALL`, `GCM_WORD32` or `GCM_TABLE`: Tunes performance and flash/m
 * `USE_SLOW_SHA512`: Over twice as small, but 50% slower
 * `USE_CERT_BUFFERS_1024` or `USE_CERT_BUFFERS_2048`: Size of RSA certs / keys to test with. 
 * `BENCH_EMBEDDED`: Define this if using the wolfCrypt test/benchmark and using a low memory target.
+* `ECC_USER_CURVES`: Allows user to defines curve sizes to enable. Default is 256-bit on. To enable others use `HAVE_ECC192`, `HAVE_ECC224`, etc....

IDE/GCC-ARM/Source/tls_client.c

@@ -108,8 +108,8 @@ static int tls_client(void)
     /*------------------------------------------------------------------------*/
     /* END CIPHER SUITE OPTIONS */
     /*------------------------------------------------------------------------*/
-    wolfSSL_SetIORecv(ctx, CbIORecv);
-    wolfSSL_SetIOSend(ctx, CbIOSend);
+    wolfSSL_CTX_SetIORecv(ctx, CbIORecv);
+    wolfSSL_CTX_SetIOSend(ctx, CbIOSend);
 
     if ((ssl = wolfSSL_new(ctx)) == NULL) {
         error = wolfSSL_get_error(ssl, 0);

IDE/MDK-ARM/MDK-ARM/wolfSSL/time-CortexM3-4.c

@@ -29,8 +29,8 @@
 #define DWT                 ((DWT_Type       *)     (0xE0001000UL)     )
 typedef struct
 {
-  uint32_t CTRL;                    /*!< Offset: 0x000 (R/W)  Control Register                          */
-  uint32_t CYCCNT;                  /*!< Offset: 0x004 (R/W)  Cycle Count Register                      */
+  uint32_t CTRL;                    /*< Offset: 0x000 (R/W)  Control Register                          */
+  uint32_t CYCCNT;                  /*< Offset: 0x004 (R/W)  Cycle Count Register                      */
 } DWT_Type;
 
 extern uint32_t SystemCoreClock ;

IDE/MDK5-ARM/Projects/CryptBenchmark/CryptBenchmark.uvprojx

@@ -10,7 +10,8 @@
       <TargetName>wolfSSL-Benchmark</TargetName>
       <ToolsetNumber>0x4</ToolsetNumber>
       <ToolsetName>ARM-ADS</ToolsetName>
-      <pCCUsed>5060422::V5.06 update 4 (build 422)::ARMCC</pCCUsed>
+      <pCCUsed>5060528::V5.06 update 5 (build 528)::ARMCC</pCCUsed>
+      <uAC6>0</uAC6>
       <TargetOption>
         <TargetCommonOption>
           <Device>STM32F756NGHx</Device>
@@ -48,7 +49,7 @@
             <InvalidFlash>1</InvalidFlash>
           </TargetStatus>
           <OutputDirectory>.\Output\</OutputDirectory>
-          <OutputName>wolfCryptTest</OutputName>
+          <OutputName>wolfCryptBenchmark</OutputName>
           <CreateExecutable>1</CreateExecutable>
           <CreateLib>0</CreateLib>
           <CreateHexFile>0</CreateHexFile>
@@ -433,12 +434,6 @@
 
   <RTE>
     <apis>
-      <api Capiversion="2.1.0" Cclass="CMSIS Driver" Cgroup="Flash" exclusive="0">
-        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.1.1"/>
-        <targetInfos>
-          <targetInfo name="wolfSSL-Benchmark"/>
-        </targetInfos>
-      </api>
       <api Capiversion="2.3.0" Cclass="CMSIS Driver" Cgroup="MCI" exclusive="0">
         <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.1.1"/>
         <targetInfos>
@@ -459,8 +454,8 @@
       </api>
     </apis>
     <components>
-      <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="5.0.2" condition="ARMv6_7_8-M Device">
-        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.1.1"/>
+      <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="5.1.1" condition="ARMv6_7_8-M Device">
+        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.3.0"/>
         <targetInfos>
           <targetInfo name="wolfSSL-Benchmark"/>
         </targetInfos>
@@ -471,32 +466,32 @@
           <targetInfo name="wolfSSL-Benchmark"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="File" Cvariant="File System" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with File System">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="File" Cvariant="File System" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with File System">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="wolfSSL-Benchmark"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDERR" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with ITM">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDERR" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with ITM">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="wolfSSL-Benchmark"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDIN" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with ITM">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDIN" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with ITM">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="wolfSSL-Benchmark"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDOUT" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with ITM">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDOUT" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with ITM">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="wolfSSL-Benchmark"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="TTY" Cvariant="Breakpoint" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="TTY" Cvariant="Breakpoint" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="wolfSSL-Benchmark"/>
         </targetInfos>
@@ -513,12 +508,6 @@
           <targetInfo name="wolfSSL-Benchmark"/>
         </targetInfos>
       </component>
-      <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="Drive" Csub="NOR" Cvendor="Keil" Cversion="6.10.0" condition="File System and Flash Driver" maxInstances="2">
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.5.0"/>
-        <targetInfos>
-          <targetInfo name="wolfSSL-Benchmark"/>
-        </targetInfos>
-      </component>
       <component Cbundle="STM32756G-EVAL" Cclass="Board Support" Cgroup="Drivers" Csub="Basic I/O" Cvendor="Keil" Cversion="1.1.0" condition="STM32756G-EVAL BSP">
         <package name="STM32F7xx_DFP" schemaVersion="1.3" url="http://www.keil.com/pack" vendor="Keil" version="2.9.0"/>
         <targetInfos>
@@ -543,12 +532,6 @@
           <targetInfo name="wolfSSL-Benchmark"/>
         </targetInfos>
       </component>
-      <component Capiversion="2.0.0" Cclass="CMSIS Driver" Cgroup="Flash" Csub="M29EW28F128" Cvendor="Keil" Cversion="1.3.0" condition="CMSIS Core">
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
-        <targetInfos>
-          <targetInfo name="wolfSSL-Benchmark"/>
-        </targetInfos>
-      </component>
       <component Capiversion="2.2.0" Cclass="CMSIS Driver" Cgroup="MCI" Cvendor="Keil" Cversion="1.4.0" condition="STM32F7 CMSIS_Driver MCI">
         <package name="STM32F7xx_DFP" schemaVersion="1.3" url="http://www.keil.com/pack" vendor="Keil" version="2.9.0"/>
         <targetInfos>
@@ -657,20 +640,20 @@
           <targetInfo name="wolfSSL-Benchmark"/>
         </targetInfos>
       </component>
-      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="Benchmark" Cvendor="wolfSSL" Cversion="" condition="wolfCrypt-Core">
-        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
+      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="Benchmark" Cvendor="wolfSSL" Cversion="3.14.0" condition="wolfCrypt-Core">
+        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.14.0"/>
         <targetInfos>
           <targetInfo name="wolfSSL-Benchmark"/>
         </targetInfos>
       </component>
-      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="CORE" Cvendor="wolfSSL" Cversion="" condition="wolfCrypt-Core">
-        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.12.2"/>
+      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="CORE" Cvendor="wolfSSL" Cversion="3.14.0" condition="wolfCrypt-Core">
+        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.14.0"/>
         <targetInfos>
           <targetInfo name="wolfSSL-Benchmark"/>
         </targetInfos>
       </component>
-      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="Dummy" Cvendor="wolfSSL" Cversion="" condition="wolfCrypt-Core">
-        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.12.2"/>
+      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="Dummy" Cvendor="wolfSSL" Cversion="3.14.0" condition="wolfCrypt-Core">
+        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.14.0"/>
         <targetInfos>
           <targetInfo name="wolfSSL-Benchmark"/>
         </targetInfos>
@@ -679,8 +662,8 @@
     <files>
       <file attr="config" category="source" name="CMSIS\RTOS\RTX\Templates\RTX_Conf_CM.c" version="4.70.1">
         <instance index="0">RTE\CMSIS\RTX_Conf_CM.c</instance>
-        <component Capiversion="1.0.0" Cclass="CMSIS" Cgroup="RTOS" Csub="Keil RTX" Cvendor="ARM" Cversion="4.81.1" condition="RTOS RTX"/>
-        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.1.1"/>
+        <component Capiversion="1.0.0" Cclass="CMSIS" Cgroup="RTOS" Csub="Keil RTX" Cvendor="ARM" Cversion="4.81.1" condition="RTOS RTX" isDefaultVariant="1"/>
+        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.3.0"/>
         <targetInfos>
           <targetInfo name="wolfSSL-Benchmark"/>
         </targetInfos>
@@ -720,7 +703,7 @@
       <file attr="config" category="source" name="FileSystem\Config\FS_Config.c" version="6.2.0">
         <instance index="0">RTE\File_System\FS_Config.c</instance>
         <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="CORE" Cvariant="LFN" Cvendor="Keil" Cversion="6.10.0" condition="CMSIS Core with RTOS and File System I/O"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.5.0"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="wolfSSL-Benchmark"/>
         </targetInfos>
@@ -728,18 +711,16 @@
       <file attr="config" category="source" name="FileSystem\Config\FS_Config_MC.h" version="6.2.0">
         <instance index="0">RTE\File_System\FS_Config_MC_0.h</instance>
         <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="Drive" Csub="Memory Card" Cvendor="Keil" Cversion="6.10.0" condition="File System and SD/MMC Driver" maxInstances="2"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.5.0"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="wolfSSL-Benchmark"/>
         </targetInfos>
       </file>
       <file attr="config" category="source" name="FileSystem\Config\FS_Config_NOR.h" version="6.2.0">
-        <instance index="0">RTE\File_System\FS_Config_NOR_0.h</instance>
+        <instance index="0" removed="1">RTE\File_System\FS_Config_NOR_0.h</instance>
         <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="Drive" Csub="NOR" Cvendor="Keil" Cversion="6.10.0" condition="File System and Flash Driver" maxInstances="2"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.5.0"/>
-        <targetInfos>
-          <targetInfo name="wolfSSL-Benchmark"/>
-        </targetInfos>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
+        <targetInfos/>
       </file>
       <file attr="config" category="source" name="Network\Config\Net_Config.c" version="0.0.0">
         <instance index="0" removed="1">RTE\Network\Net_Config.c</instance>
@@ -783,10 +764,10 @@
         <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.12.2"/>
         <targetInfos/>
       </file>
-      <file attr="config" category="header" name="wolfssl\IDE\MDK5-ARM\Conf\user_settings.h">
+      <file attr="config" category="header" name="wolfssl\IDE\MDK5-ARM\Conf\user_settings.h" version="3.14.0">
         <instance index="0">RTE\wolfSSL\user_settings.h</instance>
-        <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="CORE" Cvendor="wolfSSL" Cversion="" condition="wolfCrypt-Core"/>
-        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
+        <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="CORE" Cvendor="wolfSSL" Cversion="3.14.0" condition="wolfCrypt-Core"/>
+        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.14.0"/>
         <targetInfos>
           <targetInfo name="wolfSSL-Benchmark"/>
         </targetInfos>

IDE/MDK5-ARM/Projects/CryptTest/CryptTest.uvprojx

@@ -10,7 +10,8 @@
       <TargetName>CryptTest</TargetName>
       <ToolsetNumber>0x4</ToolsetNumber>
       <ToolsetName>ARM-ADS</ToolsetName>
-      <pCCUsed>5060422::V5.06 update 4 (build 422)::ARMCC</pCCUsed>
+      <pCCUsed>5060528::V5.06 update 5 (build 528)::ARMCC</pCCUsed>
+      <uAC6>0</uAC6>
       <TargetOption>
         <TargetCommonOption>
           <Device>STM32F756NGHx</Device>
@@ -443,12 +444,6 @@
 
   <RTE>
     <apis>
-      <api Capiversion="2.1.0" Cclass="CMSIS Driver" Cgroup="Flash" exclusive="0">
-        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.1.1"/>
-        <targetInfos>
-          <targetInfo name="CryptTest"/>
-        </targetInfos>
-      </api>
       <api Capiversion="2.02" Cclass="CMSIS Driver" Cgroup="MCI" exclusive="0">
         <package name="CMSIS" schemaVersion="1.2" url="http://www.keil.com/pack/" vendor="ARM" version="4.1.0"/>
         <targetInfos>
@@ -469,8 +464,8 @@
       </api>
     </apis>
     <components>
-      <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="5.0.2" condition="ARMv6_7_8-M Device">
-        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.1.1"/>
+      <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="5.1.1" condition="ARMv6_7_8-M Device">
+        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.3.0"/>
         <targetInfos>
           <targetInfo name="CryptTest"/>
         </targetInfos>
@@ -487,32 +482,32 @@
           <targetInfo name="CryptTest"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="File" Cvariant="File System" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with File System">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="File" Cvariant="File System" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with File System">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="CryptTest"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDERR" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with ITM">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDERR" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with ITM">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="CryptTest"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDIN" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with ITM">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDIN" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with ITM">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="CryptTest"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDOUT" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with ITM">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDOUT" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with ITM">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="CryptTest"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="TTY" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with ITM">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="TTY" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with ITM">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="CryptTest"/>
         </targetInfos>
@@ -547,12 +542,6 @@
           <targetInfo name="CryptTest"/>
         </targetInfos>
       </component>
-      <component Capiversion="2.0.0" Cclass="CMSIS Driver" Cgroup="Flash" Csub="M29EW28F128" Cvendor="Keil" Cversion="1.3.0" condition="CMSIS Core">
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
-        <targetInfos>
-          <targetInfo name="CryptTest"/>
-        </targetInfos>
-      </component>
       <component Capiversion="2.2.0" Cclass="CMSIS Driver" Cgroup="MCI" Cvendor="Keil" Cversion="1.4.0" condition="STM32F7 CMSIS_Driver MCI">
         <package name="STM32F7xx_DFP" schemaVersion="1.3" url="http://www.keil.com/pack" vendor="Keil" version="2.9.0"/>
         <targetInfos>
@@ -655,20 +644,20 @@
           <targetInfo name="CryptTest"/>
         </targetInfos>
       </component>
-      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="CORE" Cvendor="wolfSSL" Cversion="" condition="wolfCrypt-Core">
-        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.12.2"/>
+      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="CORE" Cvendor="wolfSSL" Cversion="3.14.0" condition="wolfCrypt-Core">
+        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.14.0"/>
         <targetInfos>
           <targetInfo name="CryptTest"/>
         </targetInfos>
       </component>
-      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="Dummy" Cvendor="wolfSSL" Cversion="" condition="wolfCrypt-Core">
-        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.12.2"/>
+      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="Dummy" Cvendor="wolfSSL" Cversion="3.14.0" condition="wolfCrypt-Core">
+        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.14.0"/>
         <targetInfos>
           <targetInfo name="CryptTest"/>
         </targetInfos>
       </component>
-      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="Test" Cvendor="wolfSSL" Cversion="" condition="wolfCrypt-Core">
-        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.12.2"/>
+      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="Test" Cvendor="wolfSSL" Cversion="3.14.0" condition="wolfCrypt-Core">
+        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.14.0"/>
         <targetInfos>
           <targetInfo name="CryptTest"/>
         </targetInfos>
@@ -677,8 +666,8 @@
     <files>
       <file attr="config" category="source" name="CMSIS\RTOS\RTX\Templates\RTX_Conf_CM.c" version="4.70.1">
         <instance index="0">RTE\CMSIS\RTX_Conf_CM.c</instance>
-        <component Capiversion="1.0.0" Cclass="CMSIS" Cgroup="RTOS" Csub="Keil RTX" Cvendor="ARM" Cversion="4.81.1" condition="RTOS RTX"/>
-        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.1.1"/>
+        <component Capiversion="1.0.0" Cclass="CMSIS" Cgroup="RTOS" Csub="Keil RTX" Cvendor="ARM" Cversion="4.81.1" condition="RTOS RTX" isDefaultVariant="1"/>
+        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.3.0"/>
         <targetInfos>
           <targetInfo name="CryptTest"/>
         </targetInfos>
@@ -686,7 +675,7 @@
       <file attr="config" category="header" name="Config\EventRecorderConf.h" version="1.0.0">
         <instance index="0">RTE\Compiler\EventRecorderConf.h</instance>
         <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="Event Recorder" Cvariant="DAP" Cvendor="Keil" Cversion="1.2.1" condition="Cortex-M Device"/>
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="CryptTest"/>
         </targetInfos>
@@ -726,7 +715,7 @@
       <file attr="config" category="source" name="FileSystem\Config\FS_Config.c" version="6.2.0">
         <instance index="0">RTE\File_System\FS_Config.c</instance>
         <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="CORE" Cvariant="LFN Debug" Cvendor="Keil" Cversion="6.10.0" condition="CMSIS Core with RTOS and File System I/O and Event Recorder"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.5.0"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="CryptTest"/>
         </targetInfos>
@@ -734,7 +723,7 @@
       <file attr="config" category="source" name="FileSystem\Config\FS_Config_MC.h" version="6.2.0">
         <instance index="0">RTE\File_System\FS_Config_MC_0.h</instance>
         <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="Drive" Csub="Memory Card" Cvendor="Keil" Cversion="6.10.0" condition="File System and SD/MMC Driver" maxInstances="2"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.5.0"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="CryptTest"/>
         </targetInfos>
@@ -751,10 +740,10 @@
         <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
         <targetInfos/>
       </file>
-      <file attr="config" category="header" name="wolfssl\IDE\MDK5-ARM\Conf\user_settings.h">
+      <file attr="config" category="header" name="wolfssl\IDE\MDK5-ARM\Conf\user_settings.h" version="3.14.0">
         <instance index="0">RTE\wolfSSL\user_settings.h</instance>
-        <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="CORE" Cvendor="wolfSSL" Cversion="" condition="wolfCrypt-Core"/>
-        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
+        <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="CORE" Cvendor="wolfSSL" Cversion="3.14.0" condition="wolfCrypt-Core"/>
+        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.14.0"/>
         <targetInfos>
           <targetInfo name="CryptTest"/>
         </targetInfos>

IDE/MDK5-ARM/Projects/EchoClient/EchoClient.uvprojx

@@ -10,7 +10,8 @@
       <TargetName>echoClient</TargetName>
       <ToolsetNumber>0x4</ToolsetNumber>
       <ToolsetName>ARM-ADS</ToolsetName>
-      <pCCUsed>5060422::V5.06 update 4 (build 422)::ARMCC</pCCUsed>
+      <pCCUsed>5060528::V5.06 update 5 (build 528)::ARMCC</pCCUsed>
+      <uAC6>0</uAC6>
       <TargetOption>
         <TargetCommonOption>
           <Device>STM32F756NGHx</Device>
@@ -496,8 +497,20 @@
       </api>
     </apis>
     <components>
-      <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="5.0.2" condition="ARMv6_7_8-M Device">
-        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.1.1"/>
+      <component Capiversion="2.0.0" Cclass="CMSIS Driver" Cgroup="Ethernet PHY" Csub="DP83848C" Cvendor="ARM" Cversion="6.2.0" condition="CMSIS Core">
+        <package name="CMSIS-Driver" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="ARM" version="2.1.0"/>
+        <targetInfos>
+          <targetInfo name="echoClient"/>
+        </targetInfos>
+      </component>
+      <component Capiversion="2.0.0" Cclass="CMSIS Driver" Cgroup="Flash" Csub="M29EW28F128" Cvendor="ARM" Cversion="1.3.0" condition="CMSIS Core">
+        <package name="CMSIS-Driver" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="ARM" version="2.1.0"/>
+        <targetInfos>
+          <targetInfo name="echoClient"/>
+        </targetInfos>
+      </component>
+      <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="5.1.1" condition="ARMv6_7_8-M Device">
+        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.3.0"/>
         <targetInfos>
           <targetInfo name="echoClient"/>
         </targetInfos>
@@ -508,32 +521,32 @@
           <targetInfo name="echoClient"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="File" Cvariant="File System" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with File System">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="File" Cvariant="File System" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with File System">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="echoClient"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDERR" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with ITM">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDERR" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with ITM">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="echoClient"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDIN" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with ITM">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDIN" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with ITM">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="echoClient"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDOUT" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with ITM">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDOUT" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with ITM">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="echoClient"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="TTY" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with ITM">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="TTY" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with ITM">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="echoClient"/>
         </targetInfos>
@@ -574,14 +587,14 @@
           <targetInfo name="echoClient"/>
         </targetInfos>
       </component>
-      <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="CORE" Cvariant="LFN" Cvendor="Keil" Cversion="6.9.8" condition="CMSIS Core with RTOS and File System I/O">
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
+      <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="CORE" Cvariant="LFN" Cvendor="Keil" Cversion="6.10.0" condition="CMSIS Core with RTOS and File System I/O">
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="echoClient"/>
         </targetInfos>
       </component>
-      <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="Drive" Csub="Memory Card" Cvendor="Keil" Cversion="6.9.8" condition="File System and SD/MMC Driver" maxInstances="2">
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
+      <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="Drive" Csub="Memory Card" Cvendor="Keil" Cversion="6.10.0" condition="File System and SD/MMC Driver" maxInstances="2">
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="echoClient"/>
         </targetInfos>
@@ -622,18 +635,6 @@
           <targetInfo name="echoClient"/>
         </targetInfos>
       </component>
-      <component Capiversion="2.0.0" Cclass="CMSIS Driver" Cgroup="Ethernet PHY" Csub="DP83848C" Cvendor="Keil" Cversion="6.2.0" condition="CMSIS Core">
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
-        <targetInfos>
-          <targetInfo name="echoClient"/>
-        </targetInfos>
-      </component>
-      <component Capiversion="2.0.0" Cclass="CMSIS Driver" Cgroup="Flash" Csub="M29EW28F128" Cvendor="Keil" Cversion="1.3.0" condition="CMSIS Core">
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
-        <targetInfos>
-          <targetInfo name="echoClient"/>
-        </targetInfos>
-      </component>
       <component Capiversion="2.2.0" Cclass="CMSIS Driver" Cgroup="MCI" Cvendor="Keil" Cversion="1.4.0" condition="STM32F7 CMSIS_Driver MCI">
         <package name="STM32F7xx_DFP" schemaVersion="1.3" url="http://www.keil.com/pack" vendor="Keil" version="2.9.0"/>
         <targetInfos>
@@ -742,20 +743,20 @@
           <targetInfo name="echoClient"/>
         </targetInfos>
       </component>
-      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="CORE" Cvendor="wolfSSL" Cversion="" condition="wolfCrypt-Core">
-        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
+      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="CORE" Cvendor="wolfSSL" Cversion="3.14.0" condition="wolfCrypt-Core">
+        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.14.0"/>
         <targetInfos>
           <targetInfo name="echoClient"/>
         </targetInfos>
       </component>
-      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfSSL" Csub="Core" Cvendor="wolfSSL" Cversion="" condition="wolfCrypt-Core">
-        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
+      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfSSL" Csub="Core" Cvendor="wolfSSL" Cversion="3.14.0" condition="wolfCrypt-Core">
+        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.14.0"/>
         <targetInfos>
           <targetInfo name="echoClient"/>
         </targetInfos>
       </component>
-      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfSSL" Csub="echoClient" Cvendor="wolfSSL" Cversion="" condition="wolfSSL-Core">
-        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
+      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfSSL" Csub="echoClient" Cvendor="wolfSSL" Cversion="3.14.0" condition="wolfSSL-Core">
+        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.14.0"/>
         <targetInfos>
           <targetInfo name="echoClient"/>
         </targetInfos>
@@ -764,8 +765,8 @@
     <files>
       <file attr="config" category="source" name="CMSIS\RTOS\RTX\Templates\RTX_Conf_CM.c" version="4.74.0">
         <instance index="0">RTE\CMSIS\RTX_Conf_CM.c</instance>
-        <component Capiversion="1.0.0" Cclass="CMSIS" Cgroup="RTOS" Csub="Keil RTX" Cvendor="ARM" Cversion="4.81.1" condition="RTOS RTX"/>
-        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.1.1"/>
+        <component Capiversion="1.0.0" Cclass="CMSIS" Cgroup="RTOS" Csub="Keil RTX" Cvendor="ARM" Cversion="4.81.1" condition="RTOS RTX" isDefaultVariant="1"/>
+        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.3.0"/>
         <targetInfos>
           <targetInfo name="echoClient"/>
         </targetInfos>
@@ -804,16 +805,16 @@
       </file>
       <file attr="config" category="source" name="FileSystem\Config\FS_Config.c" version="6.2.0">
         <instance index="0">RTE\File_System\FS_Config.c</instance>
-        <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="CORE" Cvariant="LFN" Cvendor="Keil" Cversion="6.9.8" condition="CMSIS Core with RTOS and File System I/O"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
+        <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="CORE" Cvariant="LFN" Cvendor="Keil" Cversion="6.10.0" condition="CMSIS Core with RTOS and File System I/O"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="echoClient"/>
         </targetInfos>
       </file>
       <file attr="config" category="source" name="FileSystem\Config\FS_Config_MC.h" version="6.2.0">
         <instance index="0">RTE\File_System\FS_Config_MC_0.h</instance>
-        <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="Drive" Csub="Memory Card" Cvendor="Keil" Cversion="6.9.8" condition="File System and SD/MMC Driver" maxInstances="2"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
+        <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="Drive" Csub="Memory Card" Cvendor="Keil" Cversion="6.10.0" condition="File System and SD/MMC Driver" maxInstances="2"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="echoClient"/>
         </targetInfos>
@@ -821,7 +822,7 @@
       <file attr="config" category="source" name="Network_v6\Config\Net_Config.c" version="5.0.0">
         <instance index="0">RTE\Network\Net_Config.c</instance>
         <component Cbundle="MDK-Pro Net_v6" Cclass="Network" Cgroup="CORE" Cvariant="Release" Cvendor="Keil" Cversion="6.7.5" condition="CMSIS Core with RTOS"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="echoClient"/>
         </targetInfos>
@@ -829,7 +830,7 @@
       <file attr="config" category="source" name="Network_v6\Config\Net_Config_BSD.h" version="5.0.0">
         <instance index="0">RTE\Network\Net_Config_BSD.h</instance>
         <component Cbundle="MDK-Pro Net_v6" Cclass="Network" Cgroup="Socket" Csub="BSD" Cvendor="Keil" Cversion="6.7.5" condition="Network UDP/TCP"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="echoClient"/>
         </targetInfos>
@@ -837,7 +838,7 @@
       <file attr="config" category="source" name="Network_v6\Config\Net_Config_DNS_Client.h" version="5.0.0">
         <instance index="0">RTE\Network\Net_Config_DNS_Client.h</instance>
         <component Cbundle="MDK-Pro Net_v6" Cclass="Network" Cgroup="Service" Csub="DNS Client" Cvendor="Keil" Cversion="6.7.5" condition="Network UDP"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="echoClient"/>
         </targetInfos>
@@ -845,7 +846,7 @@
       <file attr="config" category="source" name="Network_v6\Config\Net_Config_ETH.h" version="5.1.0">
         <instance index="0">RTE\Network\Net_Config_ETH_0.h</instance>
         <component Cbundle="MDK-Pro Net_v6" Cclass="Network" Cgroup="Interface" Csub="ETH" Cvendor="Keil" Cversion="6.7.5" condition="Network Driver ETH" maxInstances="1"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="echoClient"/>
         </targetInfos>
@@ -853,7 +854,7 @@
       <file attr="config" category="source" name="Network_v6\Config\Net_Config_TCP.h" version="5.0.1">
         <instance index="0">RTE\Network\Net_Config_TCP.h</instance>
         <component Cbundle="MDK-Pro Net_v6" Cclass="Network" Cgroup="Socket" Csub="TCP" Cvendor="Keil" Cversion="6.7.5" condition="Network Interface"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="echoClient"/>
         </targetInfos>
@@ -861,31 +862,27 @@
       <file attr="config" category="source" name="Network_v6\Config\Net_Config_UDP.h" version="5.0.0">
         <instance index="0">RTE\Network\Net_Config_UDP.h</instance>
         <component Cbundle="MDK-Pro Net_v6" Cclass="Network" Cgroup="Socket" Csub="UDP" Cvendor="Keil" Cversion="6.7.5" condition="Network Interface"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="echoClient"/>
         </targetInfos>
       </file>
       <file attr="config" category="header" name="wolfssl\IDE\MDK5-ARM\Conf\config-Crypt.h">
-        <instance index="0">RTE\wolfSSL\config-Crypt.h</instance>
+        <instance index="0" removed="1">RTE\wolfSSL\config-Crypt.h</instance>
         <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="CORE" Cvendor="wolfSSL" Cversion="" condition="wolfCrypt-Core"/>
         <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
-        <targetInfos>
-          <targetInfo name="echoClient"/>
-        </targetInfos>
+        <targetInfos/>
       </file>
       <file attr="config" category="header" name="wolfssl\IDE\MDK5-ARM\Conf\config-wolfSSL.h">
-        <instance index="0">RTE\wolfSSL\config-wolfSSL.h</instance>
+        <instance index="0" removed="1">RTE\wolfSSL\config-wolfSSL.h</instance>
         <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfSSL" Csub="Core" Cvendor="wolfSSL" Cversion="" condition="wolfCrypt-Core"/>
         <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
-        <targetInfos>
-          <targetInfo name="echoClient"/>
-        </targetInfos>
+        <targetInfos/>
       </file>
-      <file attr="config" category="header" name="wolfssl\IDE\MDK5-ARM\Conf\user_settings.h">
+      <file attr="config" category="header" name="wolfssl\IDE\MDK5-ARM\Conf\user_settings.h" version="3.14.0">
         <instance index="0">RTE\wolfSSL\user_settings.h</instance>
-        <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="CORE" Cvendor="wolfSSL" Cversion="" condition="wolfCrypt-Core"/>
-        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
+        <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfSSL" Csub="Core" Cvendor="wolfSSL" Cversion="3.14.0" condition="wolfCrypt-Core"/>
+        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.14.0"/>
         <targetInfos>
           <targetInfo name="echoClient"/>
         </targetInfos>

IDE/MDK5-ARM/Projects/EchoServer/EchoServer.uvprojx

@@ -11,6 +11,7 @@
       <ToolsetNumber>0x4</ToolsetNumber>
       <ToolsetName>ARM-ADS</ToolsetName>
       <pCCUsed>5060422::V5.06 update 4 (build 422)::ARMCC</pCCUsed>
+      <uAC6>0</uAC6>
       <TargetOption>
         <TargetCommonOption>
           <Device>STM32F756NGHx</Device>
@@ -496,8 +497,20 @@
       </api>
     </apis>
     <components>
-      <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="5.0.2" condition="ARMv6_7_8-M Device">
-        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.1.1"/>
+      <component Capiversion="2.0.0" Cclass="CMSIS Driver" Cgroup="Ethernet PHY" Csub="DP83848C" Cvendor="ARM" Cversion="6.2.0" condition="CMSIS Core">
+        <package name="CMSIS-Driver" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="ARM" version="2.1.0"/>
+        <targetInfos>
+          <targetInfo name="echoServer"/>
+        </targetInfos>
+      </component>
+      <component Capiversion="2.0.0" Cclass="CMSIS Driver" Cgroup="Flash" Csub="M29EW28F128" Cvendor="ARM" Cversion="1.3.0" condition="CMSIS Core">
+        <package name="CMSIS-Driver" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="ARM" version="2.1.0"/>
+        <targetInfos>
+          <targetInfo name="echoServer"/>
+        </targetInfos>
+      </component>
+      <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="5.1.1" condition="ARMv6_7_8-M Device">
+        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.3.0"/>
         <targetInfos>
           <targetInfo name="echoServer"/>
         </targetInfos>
@@ -508,32 +521,32 @@
           <targetInfo name="echoServer"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="File" Cvariant="File System" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with File System">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="File" Cvariant="File System" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with File System">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="echoServer"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDERR" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with ITM">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDERR" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with ITM">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="echoServer"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDIN" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with ITM">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDIN" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with ITM">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="echoServer"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDOUT" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with ITM">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDOUT" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with ITM">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="echoServer"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="TTY" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with ITM">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="TTY" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with ITM">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="echoServer"/>
         </targetInfos>
@@ -574,14 +587,14 @@
           <targetInfo name="echoServer"/>
         </targetInfos>
       </component>
-      <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="CORE" Cvariant="LFN" Cvendor="Keil" Cversion="6.9.8" condition="CMSIS Core with RTOS and File System I/O">
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
+      <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="CORE" Cvariant="LFN" Cvendor="Keil" Cversion="6.10.0" condition="CMSIS Core with RTOS and File System I/O">
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="echoServer"/>
         </targetInfos>
       </component>
-      <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="Drive" Csub="Memory Card" Cvendor="Keil" Cversion="6.9.8" condition="File System and SD/MMC Driver" maxInstances="2">
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
+      <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="Drive" Csub="Memory Card" Cvendor="Keil" Cversion="6.10.0" condition="File System and SD/MMC Driver" maxInstances="2">
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="echoServer"/>
         </targetInfos>
@@ -622,18 +635,6 @@
           <targetInfo name="echoServer"/>
         </targetInfos>
       </component>
-      <component Capiversion="2.0.0" Cclass="CMSIS Driver" Cgroup="Ethernet PHY" Csub="DP83848C" Cvendor="Keil" Cversion="6.2.0" condition="CMSIS Core">
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
-        <targetInfos>
-          <targetInfo name="echoServer"/>
-        </targetInfos>
-      </component>
-      <component Capiversion="2.0.0" Cclass="CMSIS Driver" Cgroup="Flash" Csub="M29EW28F128" Cvendor="Keil" Cversion="1.3.0" condition="CMSIS Core">
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
-        <targetInfos>
-          <targetInfo name="echoServer"/>
-        </targetInfos>
-      </component>
       <component Capiversion="2.2.0" Cclass="CMSIS Driver" Cgroup="MCI" Cvendor="Keil" Cversion="1.4.0" condition="STM32F7 CMSIS_Driver MCI">
         <package name="STM32F7xx_DFP" schemaVersion="1.3" url="http://www.keil.com/pack" vendor="Keil" version="2.9.0"/>
         <targetInfos>
@@ -742,20 +743,20 @@
           <targetInfo name="echoServer"/>
         </targetInfos>
       </component>
-      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="CORE" Cvendor="wolfSSL" Cversion="" condition="wolfCrypt-Core">
-        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
+      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="CORE" Cvendor="wolfSSL" Cversion="3.14.0" condition="wolfCrypt-Core">
+        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.14.0"/>
         <targetInfos>
           <targetInfo name="echoServer"/>
         </targetInfos>
       </component>
-      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfSSL" Csub="Core" Cvendor="wolfSSL" Cversion="" condition="wolfCrypt-Core">
-        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
+      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfSSL" Csub="Core" Cvendor="wolfSSL" Cversion="3.14.0" condition="wolfCrypt-Core">
+        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.14.0"/>
         <targetInfos>
           <targetInfo name="echoServer"/>
         </targetInfos>
       </component>
-      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfSSL" Csub="echoServer" Cvendor="wolfSSL" Cversion="" condition="wolfSSL-Core">
-        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
+      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfSSL" Csub="echoServer" Cvendor="wolfSSL" Cversion="3.14.0" condition="wolfSSL-Core">
+        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.14.0"/>
         <targetInfos>
           <targetInfo name="echoServer"/>
         </targetInfos>
@@ -764,8 +765,8 @@
     <files>
       <file attr="config" category="source" name="CMSIS\RTOS\RTX\Templates\RTX_Conf_CM.c" version="4.74.0">
         <instance index="0">RTE\CMSIS\RTX_Conf_CM.c</instance>
-        <component Capiversion="1.0.0" Cclass="CMSIS" Cgroup="RTOS" Csub="Keil RTX" Cvendor="ARM" Cversion="4.81.1" condition="RTOS RTX"/>
-        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.1.1"/>
+        <component Capiversion="1.0.0" Cclass="CMSIS" Cgroup="RTOS" Csub="Keil RTX" Cvendor="ARM" Cversion="4.81.1" condition="RTOS RTX" isDefaultVariant="1"/>
+        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.3.0"/>
         <targetInfos>
           <targetInfo name="echoServer"/>
         </targetInfos>
@@ -805,7 +806,7 @@
       <file attr="config" category="source" name="FileSystem\Config\FS_Config.c" version="6.2.0">
         <instance index="0">RTE\File_System\FS_Config.c</instance>
         <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="CORE" Cvariant="LFN" Cvendor="Keil" Cversion="6.10.0" condition="CMSIS Core with RTOS and File System I/O"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.5.0"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="echoServer"/>
         </targetInfos>
@@ -813,7 +814,7 @@
       <file attr="config" category="source" name="FileSystem\Config\FS_Config_MC.h" version="6.2.0">
         <instance index="0">RTE\File_System\FS_Config_MC_0.h</instance>
         <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="Drive" Csub="Memory Card" Cvendor="Keil" Cversion="6.10.0" condition="File System and SD/MMC Driver" maxInstances="2"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.5.0"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="echoServer"/>
         </targetInfos>
@@ -821,7 +822,7 @@
       <file attr="config" category="source" name="Network_v6\Config\Net_Config.c" version="5.0.0">
         <instance index="0">RTE\Network\Net_Config.c</instance>
         <component Cbundle="MDK-Pro Net_v6" Cclass="Network" Cgroup="CORE" Cvariant="Release" Cvendor="Keil" Cversion="6.7.5" condition="CMSIS Core with RTOS"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.5.0"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="echoServer"/>
         </targetInfos>
@@ -829,7 +830,7 @@
       <file attr="config" category="source" name="Network_v6\Config\Net_Config_BSD.h" version="5.0.0">
         <instance index="0">RTE\Network\Net_Config_BSD.h</instance>
         <component Cbundle="MDK-Pro Net_v6" Cclass="Network" Cgroup="Socket" Csub="BSD" Cvendor="Keil" Cversion="6.7.5" condition="Network UDP/TCP"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.5.0"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="echoServer"/>
         </targetInfos>
@@ -837,7 +838,7 @@
       <file attr="config" category="source" name="Network_v6\Config\Net_Config_DNS_Client.h" version="0.0.0">
         <instance index="0">RTE\Network\Net_Config_DNS_Client.h</instance>
         <component Cbundle="MDK-Pro Net_v6" Cclass="Network" Cgroup="Service" Csub="DNS Client" Cvendor="Keil" Cversion="6.7.5" condition="Network UDP"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.5.0"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="echoServer"/>
         </targetInfos>
@@ -851,7 +852,7 @@
       <file attr="config" category="source" name="Network_v6\Config\Net_Config_ETH.h" version="5.1.0">
         <instance index="0">RTE\Network\Net_Config_ETH_0.h</instance>
         <component Cbundle="MDK-Pro Net_v6" Cclass="Network" Cgroup="Interface" Csub="ETH" Cvendor="Keil" Cversion="6.7.5" condition="Network Driver ETH" maxInstances="1"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.5.0"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="echoServer"/>
         </targetInfos>
@@ -859,7 +860,7 @@
       <file attr="config" category="source" name="Network_v6\Config\Net_Config_TCP.h" version="5.0.1">
         <instance index="0">RTE\Network\Net_Config_TCP.h</instance>
         <component Cbundle="MDK-Pro Net_v6" Cclass="Network" Cgroup="Socket" Csub="TCP" Cvendor="Keil" Cversion="6.7.5" condition="Network Interface"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.5.0"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="echoServer"/>
         </targetInfos>
@@ -867,7 +868,7 @@
       <file attr="config" category="source" name="Network_v6\Config\Net_Config_UDP.h" version="5.0.0">
         <instance index="0">RTE\Network\Net_Config_UDP.h</instance>
         <component Cbundle="MDK-Pro Net_v6" Cclass="Network" Cgroup="Socket" Csub="UDP" Cvendor="Keil" Cversion="6.7.5" condition="Network Interface"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.5.0"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="echoServer"/>
         </targetInfos>
@@ -884,10 +885,10 @@
         <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
         <targetInfos/>
       </file>
-      <file attr="config" category="header" name="wolfssl\IDE\MDK5-ARM\Conf\user_settings.h">
+      <file attr="config" category="header" name="wolfssl\IDE\MDK5-ARM\Conf\user_settings.h" version="3.14.0">
         <instance index="0">RTE\wolfSSL\user_settings.h</instance>
-        <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="CORE" Cvendor="wolfSSL" Cversion="" condition="wolfCrypt-Core"/>
-        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
+        <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfSSL" Csub="Core" Cvendor="wolfSSL" Cversion="3.14.0" condition="wolfCrypt-Core"/>
+        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.14.0"/>
         <targetInfos>
           <targetInfo name="echoServer"/>
         </targetInfos>

IDE/MDK5-ARM/Projects/SimpleClient/SimpleClient.uvprojx

@@ -10,7 +10,8 @@
       <TargetName>SimpleClient</TargetName>
       <ToolsetNumber>0x4</ToolsetNumber>
       <ToolsetName>ARM-ADS</ToolsetName>
-      <pCCUsed>5060422::V5.06 update 4 (build 422)::ARMCC</pCCUsed>
+      <pCCUsed>5060528::V5.06 update 5 (build 528)::ARMCC</pCCUsed>
+      <uAC6>0</uAC6>
       <TargetOption>
         <TargetCommonOption>
           <Device>STM32F756NGHx</Device>
@@ -496,8 +497,20 @@
       </api>
     </apis>
     <components>
-      <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="5.0.2" condition="ARMv6_7_8-M Device">
-        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.1.1"/>
+      <component Capiversion="2.0.0" Cclass="CMSIS Driver" Cgroup="Ethernet PHY" Csub="DP83848C" Cvendor="ARM" Cversion="6.2.0" condition="CMSIS Core">
+        <package name="CMSIS-Driver" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="ARM" version="2.1.0"/>
+        <targetInfos>
+          <targetInfo name="SimpleClient"/>
+        </targetInfos>
+      </component>
+      <component Capiversion="2.0.0" Cclass="CMSIS Driver" Cgroup="Flash" Csub="M29EW28F128" Cvendor="ARM" Cversion="1.3.0" condition="CMSIS Core">
+        <package name="CMSIS-Driver" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="ARM" version="2.1.0"/>
+        <targetInfos>
+          <targetInfo name="SimpleClient"/>
+        </targetInfos>
+      </component>
+      <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="5.1.1" condition="ARMv6_7_8-M Device">
+        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.3.0"/>
         <targetInfos>
           <targetInfo name="SimpleClient"/>
         </targetInfos>
@@ -508,32 +521,32 @@
           <targetInfo name="SimpleClient"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="File" Cvariant="File System" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with File System">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="File" Cvariant="File System" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with File System">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="SimpleClient"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDERR" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with ITM">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDERR" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with ITM">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="SimpleClient"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDIN" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with ITM">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDIN" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with ITM">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="SimpleClient"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDOUT" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with ITM">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDOUT" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with ITM">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="SimpleClient"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="TTY" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with ITM">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="TTY" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with ITM">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="SimpleClient"/>
         </targetInfos>
@@ -574,14 +587,14 @@
           <targetInfo name="SimpleClient"/>
         </targetInfos>
       </component>
-      <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="CORE" Cvariant="LFN" Cvendor="Keil" Cversion="6.9.8" condition="CMSIS Core with RTOS and File System I/O">
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
+      <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="CORE" Cvariant="LFN" Cvendor="Keil" Cversion="6.10.0" condition="CMSIS Core with RTOS and File System I/O">
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="SimpleClient"/>
         </targetInfos>
       </component>
-      <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="Drive" Csub="Memory Card" Cvendor="Keil" Cversion="6.9.8" condition="File System and SD/MMC Driver" maxInstances="2">
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
+      <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="Drive" Csub="Memory Card" Cvendor="Keil" Cversion="6.10.0" condition="File System and SD/MMC Driver" maxInstances="2">
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="SimpleClient"/>
         </targetInfos>
@@ -622,18 +635,6 @@
           <targetInfo name="SimpleClient"/>
         </targetInfos>
       </component>
-      <component Capiversion="2.0.0" Cclass="CMSIS Driver" Cgroup="Ethernet PHY" Csub="DP83848C" Cvendor="Keil" Cversion="6.2.0" condition="CMSIS Core">
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
-        <targetInfos>
-          <targetInfo name="SimpleClient"/>
-        </targetInfos>
-      </component>
-      <component Capiversion="2.0.0" Cclass="CMSIS Driver" Cgroup="Flash" Csub="M29EW28F128" Cvendor="Keil" Cversion="1.3.0" condition="CMSIS Core">
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
-        <targetInfos>
-          <targetInfo name="SimpleClient"/>
-        </targetInfos>
-      </component>
       <component Capiversion="2.2.0" Cclass="CMSIS Driver" Cgroup="MCI" Cvendor="Keil" Cversion="1.4.0" condition="STM32F7 CMSIS_Driver MCI">
         <package name="STM32F7xx_DFP" schemaVersion="1.3" url="http://www.keil.com/pack" vendor="Keil" version="2.9.0"/>
         <targetInfos>
@@ -742,20 +743,20 @@
           <targetInfo name="SimpleClient"/>
         </targetInfos>
       </component>
-      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="CORE" Cvendor="wolfSSL" Cversion="" condition="wolfCrypt-Core">
-        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
+      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="CORE" Cvendor="wolfSSL" Cversion="3.14.0" condition="wolfCrypt-Core">
+        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.14.0"/>
         <targetInfos>
           <targetInfo name="SimpleClient"/>
         </targetInfos>
       </component>
-      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfSSL" Csub="Core" Cvendor="wolfSSL" Cversion="" condition="wolfCrypt-Core">
-        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
+      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfSSL" Csub="Core" Cvendor="wolfSSL" Cversion="3.14.0" condition="wolfCrypt-Core">
+        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.14.0"/>
         <targetInfos>
           <targetInfo name="SimpleClient"/>
         </targetInfos>
       </component>
-      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfSSL" Csub="SimpleClient" Cvendor="wolfSSL" Cversion="" condition="wolfSSL-Core">
-        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
+      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfSSL" Csub="SimpleClient" Cvendor="wolfSSL" Cversion="3.14.0" condition="wolfSSL-Core">
+        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.14.0"/>
         <targetInfos>
           <targetInfo name="SimpleClient"/>
         </targetInfos>
@@ -764,8 +765,8 @@
     <files>
       <file attr="config" category="source" name="CMSIS\RTOS\RTX\Templates\RTX_Conf_CM.c" version="4.74.0">
         <instance index="0">RTE\CMSIS\RTX_Conf_CM.c</instance>
-        <component Capiversion="1.0.0" Cclass="CMSIS" Cgroup="RTOS" Csub="Keil RTX" Cvendor="ARM" Cversion="4.81.1" condition="RTOS RTX"/>
-        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.1.1"/>
+        <component Capiversion="1.0.0" Cclass="CMSIS" Cgroup="RTOS" Csub="Keil RTX" Cvendor="ARM" Cversion="4.81.1" condition="RTOS RTX" isDefaultVariant="1"/>
+        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.3.0"/>
         <targetInfos>
           <targetInfo name="SimpleClient"/>
         </targetInfos>
@@ -804,16 +805,16 @@
       </file>
       <file attr="config" category="source" name="FileSystem\Config\FS_Config.c" version="6.2.0">
         <instance index="0">RTE\File_System\FS_Config.c</instance>
-        <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="CORE" Cvariant="LFN" Cvendor="Keil" Cversion="6.9.8" condition="CMSIS Core with RTOS and File System I/O"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
+        <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="CORE" Cvariant="LFN" Cvendor="Keil" Cversion="6.10.0" condition="CMSIS Core with RTOS and File System I/O"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="SimpleClient"/>
         </targetInfos>
       </file>
       <file attr="config" category="source" name="FileSystem\Config\FS_Config_MC.h" version="6.2.0">
         <instance index="0">RTE\File_System\FS_Config_MC_0.h</instance>
-        <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="Drive" Csub="Memory Card" Cvendor="Keil" Cversion="6.9.8" condition="File System and SD/MMC Driver" maxInstances="2"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
+        <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="Drive" Csub="Memory Card" Cvendor="Keil" Cversion="6.10.0" condition="File System and SD/MMC Driver" maxInstances="2"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="SimpleClient"/>
         </targetInfos>
@@ -821,7 +822,7 @@
       <file attr="config" category="source" name="Network_v6\Config\Net_Config.c" version="5.0.0">
         <instance index="0">RTE\Network\Net_Config.c</instance>
         <component Cbundle="MDK-Pro Net_v6" Cclass="Network" Cgroup="CORE" Cvariant="Release" Cvendor="Keil" Cversion="6.7.5" condition="CMSIS Core with RTOS"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="SimpleClient"/>
         </targetInfos>
@@ -829,7 +830,7 @@
       <file attr="config" category="source" name="Network_v6\Config\Net_Config_BSD.h" version="5.0.0">
         <instance index="0">RTE\Network\Net_Config_BSD.h</instance>
         <component Cbundle="MDK-Pro Net_v6" Cclass="Network" Cgroup="Socket" Csub="BSD" Cvendor="Keil" Cversion="6.7.5" condition="Network UDP/TCP"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="SimpleClient"/>
         </targetInfos>
@@ -837,7 +838,7 @@
       <file attr="config" category="source" name="Network_v6\Config\Net_Config_DNS_Client.h" version="5.0.0">
         <instance index="0">RTE\Network\Net_Config_DNS_Client.h</instance>
         <component Cbundle="MDK-Pro Net_v6" Cclass="Network" Cgroup="Service" Csub="DNS Client" Cvendor="Keil" Cversion="6.7.5" condition="Network UDP"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="SimpleClient"/>
         </targetInfos>
@@ -845,7 +846,7 @@
       <file attr="config" category="source" name="Network_v6\Config\Net_Config_ETH.h" version="5.1.0">
         <instance index="0">RTE\Network\Net_Config_ETH_0.h</instance>
         <component Cbundle="MDK-Pro Net_v6" Cclass="Network" Cgroup="Interface" Csub="ETH" Cvendor="Keil" Cversion="6.7.5" condition="Network Driver ETH" maxInstances="1"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="SimpleClient"/>
         </targetInfos>
@@ -853,7 +854,7 @@
       <file attr="config" category="source" name="Network_v6\Config\Net_Config_TCP.h" version="5.0.1">
         <instance index="0">RTE\Network\Net_Config_TCP.h</instance>
         <component Cbundle="MDK-Pro Net_v6" Cclass="Network" Cgroup="Socket" Csub="TCP" Cvendor="Keil" Cversion="6.7.5" condition="Network Interface"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="SimpleClient"/>
         </targetInfos>
@@ -861,31 +862,27 @@
       <file attr="config" category="source" name="Network_v6\Config\Net_Config_UDP.h" version="5.0.0">
         <instance index="0">RTE\Network\Net_Config_UDP.h</instance>
         <component Cbundle="MDK-Pro Net_v6" Cclass="Network" Cgroup="Socket" Csub="UDP" Cvendor="Keil" Cversion="6.7.5" condition="Network Interface"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="SimpleClient"/>
         </targetInfos>
       </file>
       <file attr="config" category="header" name="wolfssl\IDE\MDK5-ARM\Conf\config-Crypt.h">
-        <instance index="0">RTE\wolfSSL\config-Crypt.h</instance>
+        <instance index="0" removed="1">RTE\wolfSSL\config-Crypt.h</instance>
         <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="CORE" Cvendor="wolfSSL" Cversion="" condition="wolfCrypt-Core"/>
         <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
-        <targetInfos>
-          <targetInfo name="SimpleClient"/>
-        </targetInfos>
+        <targetInfos/>
       </file>
       <file attr="config" category="header" name="wolfssl\IDE\MDK5-ARM\Conf\config-wolfSSL.h">
-        <instance index="0">RTE\wolfSSL\config-wolfSSL.h</instance>
+        <instance index="0" removed="1">RTE\wolfSSL\config-wolfSSL.h</instance>
         <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfSSL" Csub="Core" Cvendor="wolfSSL" Cversion="" condition="wolfCrypt-Core"/>
         <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
-        <targetInfos>
-          <targetInfo name="SimpleClient"/>
-        </targetInfos>
+        <targetInfos/>
       </file>
-      <file attr="config" category="header" name="wolfssl\IDE\MDK5-ARM\Conf\user_settings.h">
+      <file attr="config" category="header" name="wolfssl\IDE\MDK5-ARM\Conf\user_settings.h" version="3.14.0">
         <instance index="0">RTE\wolfSSL\user_settings.h</instance>
-        <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="CORE" Cvendor="wolfSSL" Cversion="" condition="wolfCrypt-Core"/>
-        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
+        <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfSSL" Csub="Core" Cvendor="wolfSSL" Cversion="3.14.0" condition="wolfCrypt-Core"/>
+        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.14.0"/>
         <targetInfos>
           <targetInfo name="SimpleClient"/>
         </targetInfos>

IDE/MDK5-ARM/Projects/SimpleServer/SimpleServer.uvprojx

@@ -10,7 +10,8 @@
       <TargetName>SimpleServer</TargetName>
       <ToolsetNumber>0x4</ToolsetNumber>
       <ToolsetName>ARM-ADS</ToolsetName>
-      <pCCUsed>5060422::V5.06 update 4 (build 422)::ARMCC</pCCUsed>
+      <pCCUsed>5060528::V5.06 update 5 (build 528)::ARMCC</pCCUsed>
+      <uAC6>0</uAC6>
       <TargetOption>
         <TargetCommonOption>
           <Device>STM32F756NGHx</Device>
@@ -496,8 +497,20 @@
       </api>
     </apis>
     <components>
-      <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="5.0.2" condition="ARMv6_7_8-M Device">
-        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.1.1"/>
+      <component Capiversion="2.0.0" Cclass="CMSIS Driver" Cgroup="Ethernet PHY" Csub="DP83848C" Cvendor="ARM" Cversion="6.2.0" condition="CMSIS Core">
+        <package name="CMSIS-Driver" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="ARM" version="2.1.0"/>
+        <targetInfos>
+          <targetInfo name="SimpleServer"/>
+        </targetInfos>
+      </component>
+      <component Capiversion="2.0.0" Cclass="CMSIS Driver" Cgroup="Flash" Csub="M29EW28F128" Cvendor="ARM" Cversion="1.3.0" condition="CMSIS Core">
+        <package name="CMSIS-Driver" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="ARM" version="2.1.0"/>
+        <targetInfos>
+          <targetInfo name="SimpleServer"/>
+        </targetInfos>
+      </component>
+      <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="5.1.1" condition="ARMv6_7_8-M Device">
+        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.3.0"/>
         <targetInfos>
           <targetInfo name="SimpleServer"/>
         </targetInfos>
@@ -508,32 +521,32 @@
           <targetInfo name="SimpleServer"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="File" Cvariant="File System" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with File System">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="File" Cvariant="File System" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with File System">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="SimpleServer"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDERR" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with ITM">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDERR" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with ITM">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="SimpleServer"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDIN" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with ITM">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDIN" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with ITM">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="SimpleServer"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDOUT" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with ITM">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="STDOUT" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with ITM">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="SimpleServer"/>
         </targetInfos>
       </component>
-      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="TTY" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.0" condition="ARMCC Cortex-M with ITM">
-        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.2"/>
+      <component Cbundle="ARM Compiler" Cclass="Compiler" Cgroup="I/O" Csub="TTY" Cvariant="ITM" Cvendor="Keil" Cversion="1.2.1" condition="ARMCC Cortex-M with ITM">
+        <package name="ARM_Compiler" schemaVersion="1.4.9" url="http://www.keil.com/pack/" vendor="Keil" version="1.3.3"/>
         <targetInfos>
           <targetInfo name="SimpleServer"/>
         </targetInfos>
@@ -574,14 +587,14 @@
           <targetInfo name="SimpleServer"/>
         </targetInfos>
       </component>
-      <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="CORE" Cvariant="LFN" Cvendor="Keil" Cversion="6.9.8" condition="CMSIS Core with RTOS and File System I/O">
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
+      <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="CORE" Cvariant="LFN" Cvendor="Keil" Cversion="6.10.0" condition="CMSIS Core with RTOS and File System I/O">
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="SimpleServer"/>
         </targetInfos>
       </component>
-      <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="Drive" Csub="Memory Card" Cvendor="Keil" Cversion="6.9.8" condition="File System and SD/MMC Driver" maxInstances="2">
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
+      <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="Drive" Csub="Memory Card" Cvendor="Keil" Cversion="6.10.0" condition="File System and SD/MMC Driver" maxInstances="2">
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="SimpleServer"/>
         </targetInfos>
@@ -622,18 +635,6 @@
           <targetInfo name="SimpleServer"/>
         </targetInfos>
       </component>
-      <component Capiversion="2.0.0" Cclass="CMSIS Driver" Cgroup="Ethernet PHY" Csub="DP83848C" Cvendor="Keil" Cversion="6.2.0" condition="CMSIS Core">
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
-        <targetInfos>
-          <targetInfo name="SimpleServer"/>
-        </targetInfos>
-      </component>
-      <component Capiversion="2.0.0" Cclass="CMSIS Driver" Cgroup="Flash" Csub="M29EW28F128" Cvendor="Keil" Cversion="1.3.0" condition="CMSIS Core">
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.4.1"/>
-        <targetInfos>
-          <targetInfo name="SimpleServer"/>
-        </targetInfos>
-      </component>
       <component Capiversion="2.2.0" Cclass="CMSIS Driver" Cgroup="MCI" Cvendor="Keil" Cversion="1.4.0" condition="STM32F7 CMSIS_Driver MCI">
         <package name="STM32F7xx_DFP" schemaVersion="1.3" url="http://www.keil.com/pack" vendor="Keil" version="2.9.0"/>
         <targetInfos>
@@ -742,20 +743,20 @@
           <targetInfo name="SimpleServer"/>
         </targetInfos>
       </component>
-      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="CORE" Cvendor="wolfSSL" Cversion="" condition="wolfCrypt-Core">
-        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
+      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="CORE" Cvendor="wolfSSL" Cversion="3.14.0" condition="wolfCrypt-Core">
+        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.14.0"/>
         <targetInfos>
           <targetInfo name="SimpleServer"/>
         </targetInfos>
       </component>
-      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfSSL" Csub="Core" Cvendor="wolfSSL" Cversion="" condition="wolfCrypt-Core">
-        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
+      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfSSL" Csub="Core" Cvendor="wolfSSL" Cversion="3.14.0" condition="wolfCrypt-Core">
+        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.14.0"/>
         <targetInfos>
           <targetInfo name="SimpleServer"/>
         </targetInfos>
       </component>
-      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfSSL" Csub="SimpleServer" Cvendor="wolfSSL" Cversion="" condition="wolfSSL-Core">
-        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
+      <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfSSL" Csub="SimpleServer" Cvendor="wolfSSL" Cversion="3.14.0" condition="wolfSSL-Core">
+        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.14.0"/>
         <targetInfos>
           <targetInfo name="SimpleServer"/>
         </targetInfos>
@@ -764,8 +765,8 @@
     <files>
       <file attr="config" category="source" name="CMSIS\RTOS\RTX\Templates\RTX_Conf_CM.c" version="4.74.0">
         <instance index="0">RTE\CMSIS\RTX_Conf_CM.c</instance>
-        <component Capiversion="1.0.0" Cclass="CMSIS" Cgroup="RTOS" Csub="Keil RTX" Cvendor="ARM" Cversion="4.81.1" condition="RTOS RTX"/>
-        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.1.1"/>
+        <component Capiversion="1.0.0" Cclass="CMSIS" Cgroup="RTOS" Csub="Keil RTX" Cvendor="ARM" Cversion="4.81.1" condition="RTOS RTX" isDefaultVariant="1"/>
+        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.3.0"/>
         <targetInfos>
           <targetInfo name="SimpleServer"/>
         </targetInfos>
@@ -805,7 +806,7 @@
       <file attr="config" category="source" name="FileSystem\Config\FS_Config.c" version="6.2.0">
         <instance index="0">RTE\File_System\FS_Config.c</instance>
         <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="CORE" Cvariant="LFN" Cvendor="Keil" Cversion="6.10.0" condition="CMSIS Core with RTOS and File System I/O"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.5.0"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="SimpleServer"/>
         </targetInfos>
@@ -813,7 +814,7 @@
       <file attr="config" category="source" name="FileSystem\Config\FS_Config_MC.h" version="6.2.0">
         <instance index="0">RTE\File_System\FS_Config_MC_0.h</instance>
         <component Cbundle="MDK-Pro" Cclass="File System" Cgroup="Drive" Csub="Memory Card" Cvendor="Keil" Cversion="6.10.0" condition="File System and SD/MMC Driver" maxInstances="2"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.5.0"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="SimpleServer"/>
         </targetInfos>
@@ -821,7 +822,7 @@
       <file attr="config" category="source" name="Network_v6\Config\Net_Config.c" version="5.0.0">
         <instance index="0">RTE\Network\Net_Config.c</instance>
         <component Cbundle="MDK-Pro Net_v6" Cclass="Network" Cgroup="CORE" Cvariant="Release" Cvendor="Keil" Cversion="6.7.5" condition="CMSIS Core with RTOS"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.5.0"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="SimpleServer"/>
         </targetInfos>
@@ -829,7 +830,7 @@
       <file attr="config" category="source" name="Network_v6\Config\Net_Config_BSD.h" version="5.0.0">
         <instance index="0">RTE\Network\Net_Config_BSD.h</instance>
         <component Cbundle="MDK-Pro Net_v6" Cclass="Network" Cgroup="Socket" Csub="BSD" Cvendor="Keil" Cversion="6.7.5" condition="Network UDP/TCP"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.5.0"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="SimpleServer"/>
         </targetInfos>
@@ -837,7 +838,7 @@
       <file attr="config" category="source" name="Network_v6\Config\Net_Config_DNS_Client.h" version="0.0.0">
         <instance index="0">RTE\Network\Net_Config_DNS_Client.h</instance>
         <component Cbundle="MDK-Pro Net_v6" Cclass="Network" Cgroup="Service" Csub="DNS Client" Cvendor="Keil" Cversion="6.7.5" condition="Network UDP"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.5.0"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="SimpleServer"/>
         </targetInfos>
@@ -851,7 +852,7 @@
       <file attr="config" category="source" name="Network_v6\Config\Net_Config_ETH.h" version="5.1.0">
         <instance index="0">RTE\Network\Net_Config_ETH_0.h</instance>
         <component Cbundle="MDK-Pro Net_v6" Cclass="Network" Cgroup="Interface" Csub="ETH" Cvendor="Keil" Cversion="6.7.5" condition="Network Driver ETH" maxInstances="1"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.5.0"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="SimpleServer"/>
         </targetInfos>
@@ -859,7 +860,7 @@
       <file attr="config" category="source" name="Network_v6\Config\Net_Config_TCP.h" version="5.0.1">
         <instance index="0">RTE\Network\Net_Config_TCP.h</instance>
         <component Cbundle="MDK-Pro Net_v6" Cclass="Network" Cgroup="Socket" Csub="TCP" Cvendor="Keil" Cversion="6.7.5" condition="Network Interface"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.5.0"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="SimpleServer"/>
         </targetInfos>
@@ -867,7 +868,7 @@
       <file attr="config" category="source" name="Network_v6\Config\Net_Config_UDP.h" version="5.0.0">
         <instance index="0">RTE\Network\Net_Config_UDP.h</instance>
         <component Cbundle="MDK-Pro Net_v6" Cclass="Network" Cgroup="Socket" Csub="UDP" Cvendor="Keil" Cversion="6.7.5" condition="Network Interface"/>
-        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.5.0"/>
+        <package name="MDK-Middleware" schemaVersion="1.4" url="http://www.keil.com/pack/" vendor="Keil" version="7.6.0"/>
         <targetInfos>
           <targetInfo name="SimpleServer"/>
         </targetInfos>
@@ -884,10 +885,10 @@
         <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
         <targetInfos/>
       </file>
-      <file attr="config" category="header" name="wolfssl\IDE\MDK5-ARM\Conf\user_settings.h">
+      <file attr="config" category="header" name="wolfssl\IDE\MDK5-ARM\Conf\user_settings.h" version="3.14.0">
         <instance index="0">RTE\wolfSSL\user_settings.h</instance>
-        <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfCrypt" Csub="CORE" Cvendor="wolfSSL" Cversion="" condition="wolfCrypt-Core"/>
-        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.13.0"/>
+        <component Cbundle="wolfSSL" Cclass="wolfSSL" Cgroup="wolfSSL" Csub="Core" Cvendor="wolfSSL" Cversion="3.14.0" condition="wolfCrypt-Core"/>
+        <package license="wolfssl\IDE\MDK5-ARM\Docs\wolfSSL-License.txt" name="wolfSSL" schemaVersion="1.4" url="http://www.wolfSSL.com/files/ide" vendor="wolfSSL" version="3.14.0"/>
         <targetInfos>
           <targetInfo name="SimpleServer"/>
         </targetInfos>

IDE/OPENSTM32/README.md

@@ -8,11 +8,11 @@
 
 ## Setup
 
-1. Using the STM32CubeMX tool, load the `<wolfssl-root>/IDE/OPENSTM32/wolfSTM32.ino` file.
+1. Using the STM32CubeMX tool, load the `<wolfssl-root>/IDE/OPENSTM32/wolfSTM32.ioc` file.
 2. Adjust the HAL options based on your specific micro-controller.
 3. Generate source code.
 4. Run `SystemWorkbench` and choose a new workspace location for this project.
-5. Import `wolfSTM32' project from `<wolfssl-root>/IDE/OPENSTM32/`.
+5. Import `wolfSTM32` project from `<wolfssl-root>/IDE/OPENSTM32/`.
 6. Adjust the micro-controller define in `Project Settings -> C/C++ General -> Paths and Symbols -> Symbols -> GNU C`. Example uses `STM32F437xx`, but should be changed to reflect your micro-controller type.
 7. Build and Run
 
@@ -24,4 +24,4 @@ The settings for the wolfSTM32 project are located in `<wolfssl-root>/IDE/OPENST
 
 ## Support
 
-For questions please email [support@wolfssl.com](mailto:support@wolfssl.com)
+For questions please email [support@wolfssl.com](mailto:support@wolfssl.com)

IDE/Renesas/cs+/Projects/Readme.txt

@@ -0,0 +1,13 @@
+
+wolfssl_lib:
+  Build wolfssl_lib.lib
+
+test:
+  Get missing files 
+  - create DUMMY project
+  - copy all files under DUMMY project except DUMMY.*
+  - uncomment "Use SIM I/O" lines in resetprg.c
+  - set heap size in sbrk.h
+  - set stack size in stacksct.h
+  Build test wolfCrypt
+

IDE/Renesas/cs+/Projects/common/strings.h

@@ -0,0 +1,2 @@
+
+int strncasecmp(const char *s1, const char * s2, unsigned int sz);

IDE/Renesas/cs+/Projects/common/unistd.h

@@ -0,0 +1 @@
+/* DUMMY Header */

IDE/Renesas/cs+/Projects/common/user_settings.h

@@ -0,0 +1,46 @@
+
+#define NO_MAIN_DRIVER
+#define BENCH_EMBEDDED
+#define NO_WRITEV
+#define WOLFSSL_USER_IO
+#define NO_DEV_RANDOM
+#define USE_CERT_BUFFERS_2048
+#define WOLFSSL_USER_CURRTIME
+#define SIZEOF_LONG_LONG 8
+#define NO_WOLFSSL_DIR 
+#define WOLFSSL_NO_CURRDIR
+#define NO_FILESYSTEM
+#define WOLFSSL_LOG_PRINTF
+
+/* #define DEBUG_WOLFSSL */
+
+#define OPENSSL_EXTRA
+
+#define WOLFSSL_SMALL_STACK
+#define WOLFSSL_DH_CONST
+#define HAVE_TLS_EXTENSIONS
+#define HAVE_SUPPORTED_CURVES
+
+#define USER_TIME
+#define XTIME time
+#define USE_WOLF_SUSECONDS_T
+#define USE_WOLF_TIMEVAL_T
+
+#define WOLFSSL_USER_CURRTIME /* for benchmark */
+
+#define WOLFSSL_GENSEED_FORTEST /* Wardning: define your own seed gen */
+
+#define TFM_TIMING_RESISTANT
+#define ECC_TIMING_RESISTANT
+#define WC_RSA_BLINDING
+
+#define SINGLE_THREADED  /* or define RTOS  option */
+/* #define WOLFSSL_CMSIS_RTOS */
+
+/* #define NO_DH */
+#define HAVE_AESGCM
+#define WOLFSSL_SHA512
+#define HAVE_ECC
+#define HAVE_CURVE25519
+#define CURVE25519_SMALL
+#define HAVE_ED25519

IDE/Renesas/cs+/Projects/common/wolfssl_dummy.c

@@ -0,0 +1,41 @@
+/* wolfssl_dummy.c
+ *
+ * Copyright (C) 2006-2017 wolfSSL Inc.
+ *
+ * This file is part of wolfSSL.
+ *
+ * wolfSSL is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * wolfSSL is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
+ */
+ 
+typedef unsigned long time_t;
+
+#define YEAR 2018
+#define MON  5
+
+static int tick = 0;
+
+time_t time(time_t *t)
+{
+    return ((YEAR-1970)*365+30*MON)*24*60*60 + tick++;
+}
+
+#include <ctype.h>
+int strncasecmp(const char *s1, const char * s2, unsigned int sz)
+{
+    for( ; sz>0; sz--)
+        if(toupper(s1++) != toupper(s2++))
+	    return 1;
+    return 0;	
+}

IDE/Renesas/cs+/Projects/test/test_main.c

@@ -0,0 +1,47 @@
+/***********************************************************************/
+/*                                                                     */
+/*  FILE        :Main.c or Main.cpp                                    */
+/*  DATE        :Tue, Oct 31, 2006                                     */
+/*  DESCRIPTION :Main Program                                          */
+/*  CPU TYPE    :                                                      */
+/*                                                                     */
+/*  NOTE:THIS IS A TYPICAL EXAMPLE.                                    */
+/*                                                                     */
+/***********************************************************************/
+#include "typedefine.h"
+#ifdef __cplusplus
+#include <ios>                        // Remove the comment when you use ios
+_SINT ios_base::Init::init_cnt;       // Remove the comment when you use ios
+#endif
+
+#include "stdio.h"
+
+void main(void);
+#ifdef __cplusplus
+extern "C" {
+void abort(void);
+}
+#endif
+
+typedef struct func_args {
+    int    argc;
+    char** argv;
+    int    return_code;
+} func_args;
+
+void wolfcrypt_test(func_args args);
+
+void main(void)
+{
+    func_args args = { 1 };
+    printf("Start wolfCrypt Test\n");
+    wolfcrypt_test(args);
+    printf("End wolfCrypt Test\n");
+}
+
+#ifdef __cplusplus
+void abort(void)
+{
+
+}
+#endif

IDE/WIN/user_settings.h

@@ -36,6 +36,17 @@
         #define WOLFSSL_SNIFFER
         #define HAVE_TLS_EXTENSIONS
         #define HAVE_SECURE_RENEGOTIATION
+
+        #define HAVE_AESGCM
+        #define WOLFSSL_SHA384
+        #define WOLFSSL_SHA512
+
+        #define HAVE_SUPPORTED_CURVES
+        #define HAVE_TLS_EXTENSIONS
+
+        #define HAVE_ECC
+        #define ECC_SHAMIR
+        #define ECC_TIMING_RESISTANT
     #else
         /* The servers and clients */
         #define OPENSSL_EXTRA

IDE/WIN10/README.txt

@@ -0,0 +1,70 @@
+# Notes on the wolfssl-fips project
+
+First, if you did not get the FIPS files with your archive, you must contact
+wolfSSL to obtain them.
+
+
+# Building the wolfssl-fips project
+
+The wolfCrypt FIPS library for Windows is a part of the wolfSSL library. It
+must be built as a static library, for the moment.
+
+The library project is built with Whole Program Optimization disabled. This is
+required so that necessary components of the library are not optimized away.
+There are two functions added to the library that are used as markers in
+memory for the in-core memory check of the code. WPO consolidates them into a
+single function. WPO also optimizes away the automatic FIPS entry function.
+
+Each of the source files inside the FIPS boundary defines their own code and
+constant section. The code section names start with ".fipsA$" and the constant
+section names start with ".fipsB$". Each subsection has a letter to organize
+them in a secific order. This specific ordering puts marker functions and
+constants on either end of the boundary so it can be hashed.
+
+
+# In Core Memory Test
+
+The In Core Memory test calculates a checksum (HMAC-SHA256) of the wolfCrypt
+FIPS library code and constant data and compares it with a known value in
+the code.
+
+The Randomized Base Address setting needs to be disabled on the 32-bit builds
+but can be enabled on the 64-bit builds. In the 32-bit mode the addresses
+being different throws off the in-core memory calculation. It looks like in
+64-bit mode the library uses all offsets, so the core hash calculation
+is the same every time.
+
+The "verifyCore" check value in the source fips_test.c needs to be updated when
+building the code. The POS performs this check and the default failure callback
+will print out the calculated checksum. When developing your code, copy this
+value and paste it back into your code in the verifyCore initializer then
+rebuild the code. When statically linking, you may have to recalculate your
+check value when changing your application.
+
+
+# Build Options
+
+The default build options should be the proper default set of options:
+
+ * HAVE_FIPS
+ * HAVE_THREAD_LS
+ * HAVE_AESGCM
+ * HAVE_HASHDRBG
+ * WOLFSSL_SHA384
+ * WOLFSSL_SHA512
+ * NO_HC128
+ * NO_RC4
+ * NO_RABBIT
+ * NO_DSA
+ * NO_MD4
+
+The "NO" options explicitly disable algorithms that are not allowed in
+FIPS mode.
+
+Additionally one may enable:
+
+ * HAVE_ECC
+ * OPENSSL_EXTRA
+ * WOLFSSL_KEY_GEN
+
+These settings are defined in IDE/WIN/user_settings.h.

IDE/WIN10/include.am

@@ -0,0 +1,9 @@
+# vim:ft=automake
+# included from Top Level Makefile.am
+# All paths should be given relative to the root
+
+EXTRA_DIST+= IDE/WIN10/README.txt
+EXTRA_DIST+= IDE/WIN10/test.vcxproj
+EXTRA_DIST+= IDE/WIN10/wolfssl-fips.sln
+EXTRA_DIST+= IDE/WIN10/wolfssl-fips.vcxproj
+EXTRA_DIST+= IDE/WIN10/user_settings.h

IDE/WIN10/test.vcxproj

@@ -0,0 +1,277 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Debug|Win32">
+      <Configuration>Debug</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|x64">
+      <Configuration>Debug</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="DLL Debug|Win32">
+      <Configuration>DLL Debug</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="DLL Debug|x64">
+      <Configuration>DLL Debug</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="DLL Release|Win32">
+      <Configuration>DLL Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="DLL Release|x64">
+      <Configuration>DLL Release</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|x64">
+      <Configuration>Release</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{D04BDF66-664A-4D59-BEAC-8AB2D5809C21}</ProjectGuid>
+    <Keyword>Win32Proj</Keyword>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset>v110</PlatformToolset>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset>v110</PlatformToolset>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset>v110</PlatformToolset>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset>v110</PlatformToolset>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='DLL Release|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset>v110</PlatformToolset>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='DLL Release|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset>v110</PlatformToolset>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='DLL Debug|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset>v110</PlatformToolset>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='DLL Debug|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset>v110</PlatformToolset>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='DLL Release|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='DLL Release|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='DLL Debug|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='DLL Debug|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup>
+    <_ProjectFileVersion>11.0.61030.0</_ProjectFileVersion>
+  </PropertyGroup>
+  <PropertyGroup>
+    <OutDir>$(SolutionDir)$(Configuration)\$(Platform)\</OutDir>
+    <IntDir>$(Configuration)\$(Platform)\obj\</IntDir>
+    <LinkIncremental>false</LinkIncremental>
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>.\;..\..\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;HAVE_FIPS;HAVE_FIPS_VERSION=2;USE_CERT_BUFFERS_2048;WOLFSSL_USER_SETTINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <PrecompiledHeader />
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <TargetMachine>MachineX86</TargetMachine>
+      <AdditionalDependencies>ws2_32.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>.\;..\..\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;HAVE_FIPS;HAVE_FIPS_VERSION=2;USE_CERT_BUFFERS_2048;WOLFSSL_USER_SETTINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <PrecompiledHeader />
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <AdditionalDependencies>ws2_32.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <RandomizedBaseAddress>true</RandomizedBaseAddress>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <ClCompile>
+      <AdditionalIncludeDirectories>.\;..\..\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;HAVE_FIPS;HAVE_FIPS_VERSION=2;USE_CERT_BUFFERS_2048;WOLFSSL_USER_SETTINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <PrecompiledHeader />
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+      <WholeProgramOptimization>true</WholeProgramOptimization>
+    </ClCompile>
+    <Link>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <TargetMachine>MachineX86</TargetMachine>
+      <AdditionalDependencies>ws2_32.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <LinkTimeCodeGeneration>UseLinkTimeCodeGeneration</LinkTimeCodeGeneration>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <ClCompile>
+      <AdditionalIncludeDirectories>.\;..\..\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;HAVE_FIPS;HAVE_FIPS_VERSION=2;USE_CERT_BUFFERS_2048;WOLFSSL_USER_SETTINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <PrecompiledHeader />
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+      <WholeProgramOptimization>true</WholeProgramOptimization>
+    </ClCompile>
+    <Link>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <AdditionalDependencies>ws2_32.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <LinkTimeCodeGeneration>UseLinkTimeCodeGeneration</LinkTimeCodeGeneration>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='DLL Debug|Win32'">
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>.\;..\..\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;HAVE_FIPS;HAVE_FIPS_VERSION=2;USE_CERT_BUFFERS_2048;WOLFSSL_USER_SETTINGS;WOLFSSL_DLL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <PrecompiledHeader />
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+    </ClCompile>
+    <Link>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <TargetMachine>MachineX86</TargetMachine>
+      <AdditionalDependencies>ws2_32.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <RandomizedBaseAddress>true</RandomizedBaseAddress>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='DLL Debug|x64'">
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>.\;..\..\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;HAVE_FIPS;HAVE_FIPS_VERSION=2;USE_CERT_BUFFERS_2048;WOLFSSL_USER_SETTINGS;CYASSL_USER_SETTINGS;CYASSL_DLL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <PrecompiledHeader />
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+    </ClCompile>
+    <Link>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <AdditionalDependencies>ws2_32.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='DLL Release|Win32'">
+    <ClCompile>
+      <AdditionalIncludeDirectories>.\;..\..\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;HAVE_FIPS;HAVE_FIPS_VERSION=2;USE_CERT_BUFFERS_2048;WOLFSSL_USER_SETTINGS;WOLFSSL_DLL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <PrecompiledHeader />
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <AdditionalDependencies>ws2_32.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <TargetMachine>MachineX86</TargetMachine>
+      <LinkTimeCodeGeneration>UseLinkTimeCodeGeneration</LinkTimeCodeGeneration>
+      <RandomizedBaseAddress>true</RandomizedBaseAddress>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='DLL Release|x64'">
+    <ClCompile>
+      <AdditionalIncludeDirectories>.\;..\..\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;HAVE_FIPS;HAVE_FIPS_VERSION=2;USE_CERT_BUFFERS_2048;WOLFSSL_USER_SETTINGS;WOLFSSL_DLL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <PrecompiledHeader />
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <AdditionalDependencies>ws2_32.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <LinkTimeCodeGeneration>UseLinkTimeCodeGeneration</LinkTimeCodeGeneration>
+      <RandomizedBaseAddress>true</RandomizedBaseAddress>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClCompile Include="..\..\wolfcrypt\test\test.c" />
+  </ItemGroup>
+  <ItemGroup>
+    <ProjectReference Include="wolfssl-fips.vcxproj">
+      <Project>{73973223-5ee8-41ca-8e88-1d60e89a237b}</Project>
+      <ReferenceOutputAssembly>false</ReferenceOutputAssembly>
+    </ProjectReference>
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

IDE/WIN10/user_settings.h

@@ -0,0 +1,75 @@
+#ifndef _WIN_USER_SETTINGS_H_
+#define _WIN_USER_SETTINGS_H_
+
+/* Verify this is Windows */
+#ifndef _WIN32
+#error This user_settings.h header is only designed for Windows
+#endif
+
+/* Configurations */
+#if defined(HAVE_FIPS)
+    /* FIPS */
+    #define OPENSSL_EXTRA
+    #define HAVE_THREAD_LS
+    #define WOLFSSL_KEY_GEN
+    #define HAVE_AESGCM
+    #define HAVE_HASHDRBG
+    #define WOLFSSL_SHA384
+    #define WOLFSSL_SHA512
+    #define NO_PSK
+    #define NO_HC128
+    #define NO_RC4
+    #define NO_RABBIT
+    #define NO_DSA
+    #define NO_MD4
+
+    #if defined(HAVE_FIPS_VERSION) && (HAVE_FIPS_VERSION >= 2)
+        #define WOLFSSL_SHA224
+        #define WOLFSSL_SHA3
+        #define WC_RSA_PSS
+        #define WC_RSA_NO_PADDING
+        #define HAVE_ECC
+        #define ECC_SHAMIR
+        #define HAVE_ECC_CDH
+        #define ECC_TIMING_RESISTANT
+        #define WOLFSSL_AES_COUNTER
+        #define WOLFSSL_AES_DIRECT
+        #define HAVE_AES_ECB
+        #define HAVE_AESCCM
+        #define WOLFSSL_CMAC
+        #define HAVE_HKDF
+        #define WOLFSSL_PUBLIC_MP
+    #endif /* FIPS v2 */
+#else
+    /* Enables blinding mode, to prevent timing attacks */
+    #define WC_RSA_BLINDING
+
+    #if defined(WOLFSSL_LIB)
+        /* The lib */
+        #define OPENSSL_EXTRA
+        #define WOLFSSL_RIPEMD
+        #define WOLFSSL_SHA512
+        #define NO_PSK
+        #define HAVE_EXTENDED_MASTER
+        #define WOLFSSL_SNIFFER
+        #define HAVE_TLS_EXTENSIONS
+        #define HAVE_SECURE_RENEGOTIATION
+
+        #define HAVE_AESGCM
+        #define WOLFSSL_SHA384
+        #define WOLFSSL_SHA512
+
+        #define HAVE_SUPPORTED_CURVES
+        #define HAVE_TLS_EXTENSIONS
+
+        #define HAVE_ECC
+        #define ECC_SHAMIR
+        #define ECC_TIMING_RESISTANT
+    #else
+        /* The servers and clients */
+        #define OPENSSL_EXTRA
+        #define NO_PSK
+    #endif
+#endif /* HAVE_FIPS */
+
+#endif /* _WIN_USER_SETTINGS_H_ */

IDE/WIN10/wolfssl-fips.sln

@@ -0,0 +1,56 @@
+
+Microsoft Visual Studio Solution File, Format Version 10.00
+# Visual Studio Express 2012 for Windows Desktop
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "wolfssl-fips", "wolfssl-fips.vcxproj", "{73973223-5EE8-41CA-8E88-1D60E89A237B}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "test", "test.vcxproj", "{D04BDF66-664A-4D59-BEAC-8AB2D5809C21}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|Win32 = Debug|Win32
+		Debug|x64 = Debug|x64
+		DLL Debug|Win32 = DLL Debug|Win32
+		DLL Debug|x64 = DLL Debug|x64
+		DLL Release|Win32 = DLL Release|Win32
+		DLL Release|x64 = DLL Release|x64
+		Release|Win32 = Release|Win32
+		Release|x64 = Release|x64
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{73973223-5EE8-41CA-8E88-1D60E89A237B}.Debug|Win32.ActiveCfg = Debug|Win32
+		{73973223-5EE8-41CA-8E88-1D60E89A237B}.Debug|Win32.Build.0 = Debug|Win32
+		{73973223-5EE8-41CA-8E88-1D60E89A237B}.Debug|x64.ActiveCfg = Debug|x64
+		{73973223-5EE8-41CA-8E88-1D60E89A237B}.Debug|x64.Build.0 = Debug|x64
+		{73973223-5EE8-41CA-8E88-1D60E89A237B}.DLL Debug|Win32.ActiveCfg = DLL Debug|Win32
+		{73973223-5EE8-41CA-8E88-1D60E89A237B}.DLL Debug|Win32.Build.0 = DLL Debug|Win32
+		{73973223-5EE8-41CA-8E88-1D60E89A237B}.DLL Debug|x64.ActiveCfg = DLL Debug|x64
+		{73973223-5EE8-41CA-8E88-1D60E89A237B}.DLL Debug|x64.Build.0 = DLL Debug|x64
+		{73973223-5EE8-41CA-8E88-1D60E89A237B}.DLL Release|Win32.ActiveCfg = DLL Release|Win32
+		{73973223-5EE8-41CA-8E88-1D60E89A237B}.DLL Release|Win32.Build.0 = DLL Release|Win32
+		{73973223-5EE8-41CA-8E88-1D60E89A237B}.DLL Release|x64.ActiveCfg = DLL Release|x64
+		{73973223-5EE8-41CA-8E88-1D60E89A237B}.DLL Release|x64.Build.0 = DLL Release|x64
+		{73973223-5EE8-41CA-8E88-1D60E89A237B}.Release|Win32.ActiveCfg = Release|Win32
+		{73973223-5EE8-41CA-8E88-1D60E89A237B}.Release|Win32.Build.0 = Release|Win32
+		{73973223-5EE8-41CA-8E88-1D60E89A237B}.Release|x64.ActiveCfg = Release|x64
+		{73973223-5EE8-41CA-8E88-1D60E89A237B}.Release|x64.Build.0 = Release|x64
+		{D04BDF66-664A-4D59-BEAC-8AB2D5809C21}.Debug|Win32.ActiveCfg = Debug|Win32
+		{D04BDF66-664A-4D59-BEAC-8AB2D5809C21}.Debug|Win32.Build.0 = Debug|Win32
+		{D04BDF66-664A-4D59-BEAC-8AB2D5809C21}.Debug|x64.ActiveCfg = Debug|x64
+		{D04BDF66-664A-4D59-BEAC-8AB2D5809C21}.Debug|x64.Build.0 = Debug|x64
+		{D04BDF66-664A-4D59-BEAC-8AB2D5809C21}.DLL Debug|Win32.ActiveCfg = DLL Debug|Win32
+		{D04BDF66-664A-4D59-BEAC-8AB2D5809C21}.DLL Debug|Win32.Build.0 = DLL Debug|Win32
+		{D04BDF66-664A-4D59-BEAC-8AB2D5809C21}.DLL Debug|x64.ActiveCfg = DLL Debug|x64
+		{D04BDF66-664A-4D59-BEAC-8AB2D5809C21}.DLL Debug|x64.Build.0 = DLL Debug|x64
+		{D04BDF66-664A-4D59-BEAC-8AB2D5809C21}.DLL Release|Win32.ActiveCfg = DLL Release|Win32
+		{D04BDF66-664A-4D59-BEAC-8AB2D5809C21}.DLL Release|Win32.Build.0 = DLL Release|Win32
+		{D04BDF66-664A-4D59-BEAC-8AB2D5809C21}.DLL Release|x64.ActiveCfg = DLL Release|x64
+		{D04BDF66-664A-4D59-BEAC-8AB2D5809C21}.DLL Release|x64.Build.0 = DLL Release|x64
+		{D04BDF66-664A-4D59-BEAC-8AB2D5809C21}.Release|Win32.ActiveCfg = Release|Win32
+		{D04BDF66-664A-4D59-BEAC-8AB2D5809C21}.Release|Win32.Build.0 = Release|Win32
+		{D04BDF66-664A-4D59-BEAC-8AB2D5809C21}.Release|x64.ActiveCfg = Release|x64
+		{D04BDF66-664A-4D59-BEAC-8AB2D5809C21}.Release|x64.Build.0 = Release|x64
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+EndGlobal

IDE/WIN10/wolfssl-fips.vcxproj

@@ -0,0 +1,308 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Debug|Win32">
+      <Configuration>Debug</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|x64">
+      <Configuration>Debug</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="DLL Debug|Win32">
+      <Configuration>DLL Debug</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="DLL Debug|x64">
+      <Configuration>DLL Debug</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="DLL Release|Win32">
+      <Configuration>DLL Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="DLL Release|x64">
+      <Configuration>DLL Release</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|x64">
+      <Configuration>Release</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{73973223-5EE8-41CA-8E88-1D60E89A237B}</ProjectGuid>
+    <RootNamespace>wolfssl-fips</RootNamespace>
+    <Keyword>Win32Proj</Keyword>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>StaticLibrary</ConfigurationType>
+    <PlatformToolset>v110</PlatformToolset>
+    <CharacterSet>Unicode</CharacterSet>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='DLL Release|Win32'" Label="Configuration">
+    <ConfigurationType>DynamicLibrary</ConfigurationType>
+    <PlatformToolset>v110</PlatformToolset>
+    <CharacterSet>Unicode</CharacterSet>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+    <ConfigurationType>StaticLibrary</ConfigurationType>
+    <PlatformToolset>v110</PlatformToolset>
+    <CharacterSet>Unicode</CharacterSet>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='DLL Release|x64'" Label="Configuration">
+    <ConfigurationType>DynamicLibrary</ConfigurationType>
+    <PlatformToolset>v110</PlatformToolset>
+    <CharacterSet>Unicode</CharacterSet>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+    <ConfigurationType>StaticLibrary</ConfigurationType>
+    <PlatformToolset>v110</PlatformToolset>
+    <CharacterSet>Unicode</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='DLL Debug|Win32'" Label="Configuration">
+    <ConfigurationType>DynamicLibrary</ConfigurationType>
+    <PlatformToolset>v110</PlatformToolset>
+    <CharacterSet>Unicode</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+    <ConfigurationType>StaticLibrary</ConfigurationType>
+    <PlatformToolset>v110</PlatformToolset>
+    <CharacterSet>Unicode</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='DLL Debug|x64'" Label="Configuration">
+    <ConfigurationType>DynamicLibrary</ConfigurationType>
+    <PlatformToolset>v110</PlatformToolset>
+    <CharacterSet>Unicode</CharacterSet>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='DLL Release|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='DLL Release|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='DLL Debug|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='DLL Debug|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup>
+    <OutDir>$(SolutionDir)$(Configuration)\$(Platform)\</OutDir>
+    <IntDir>$(Configuration)\$(Platform)\obj\</IntDir>
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>./;../../;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>HAVE_FIPS;HAVE_FIPS_VERSION=2;WOLFSSL_USER_SETTINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <WarningLevel>Level4</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+      <DisableSpecificWarnings>4206;4214;4706;%(DisableSpecificWarnings)</DisableSpecificWarnings>
+    </ClCompile>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='DLL Debug|Win32'">
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>./;../../;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>HAVE_FIPS;HAVE_FIPS_VERSION=2;BUILDING_WOLFSSL;WOLFSSL_DLL;WOLFSSL_USER_SETTINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MinimalRebuild>true</MinimalRebuild>
+      <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <WarningLevel>Level4</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+      <DisableSpecificWarnings>4206;4214;4706;%(DisableSpecificWarnings)</DisableSpecificWarnings>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <BaseAddress>0x5A000000</BaseAddress>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+      <DataExecutionPrevention>false</DataExecutionPrevention>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>./;../../;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>HAVE_FIPS;HAVE_FIPS_VERSION=2;WOLFSSL_USER_SETTINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <WarningLevel>Level4</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+      <DisableSpecificWarnings>4206;4214;4706;%(DisableSpecificWarnings)</DisableSpecificWarnings>
+    </ClCompile>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='DLL Debug|x64'">
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>./;../../;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>HAVE_FIPS;HAVE_FIPS_VERSION=2;BUILDING_WOLFSSL;WOLFSSL_DLL;WOLFSSL_USER_SETTINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MinimalRebuild>true</MinimalRebuild>
+      <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <WarningLevel>Level4</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+      <DisableSpecificWarnings>4206;4214;4706;%(DisableSpecificWarnings)</DisableSpecificWarnings>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+      <DataExecutionPrevention>false</DataExecutionPrevention>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <IntrinsicFunctions>true</IntrinsicFunctions>
+      <AdditionalIncludeDirectories>./;../../;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>HAVE_FIPS;HAVE_FIPS_VERSION=2;WOLFSSL_USER_SETTINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+      <WholeProgramOptimization>false</WholeProgramOptimization>
+    </ClCompile>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='DLL Release|Win32'">
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <IntrinsicFunctions>true</IntrinsicFunctions>
+      <AdditionalIncludeDirectories>./;../../;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>HAVE_FIPS;HAVE_FIPS_VERSION=2;BUILDING_WOLFSSL;WOLFSSL_DLL;WOLFSSL_USER_SETTINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+      <BaseAddress>0x5A000000</BaseAddress>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <IntrinsicFunctions>true</IntrinsicFunctions>
+      <AdditionalIncludeDirectories>./;../../;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>HAVE_FIPS;HAVE_FIPS_VERSION=2;WOLFSSL_USER_SETTINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+      <WholeProgramOptimization>false</WholeProgramOptimization>
+    </ClCompile>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='DLL Release|x64'">
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <IntrinsicFunctions>true</IntrinsicFunctions>
+      <AdditionalIncludeDirectories>./;../../;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>HAVE_FIPS;HAVE_FIPS_VERSION=2;BUILDING_WOLFSSL;WOLFSSL_DLL;WOLFSSL_USER_SETTINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <RandomizedBaseAddress>true</RandomizedBaseAddress>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClCompile Include="..\..\wolfcrypt\src\aes.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\asn.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\cmac.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\coding.c" />
+    <ClCompile Include="..\..\src\crl.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\cpuid.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\des3.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\dh.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\ecc.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\error.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\fips.c">
+      <WholeProgramOptimization Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</WholeProgramOptimization>
+      <WholeProgramOptimization Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</WholeProgramOptimization>
+      <WholeProgramOptimization Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">false</WholeProgramOptimization>
+      <WholeProgramOptimization Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">false</WholeProgramOptimization>
+    </ClCompile>
+    <ClCompile Include="..\..\wolfcrypt\src\fips_test.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\hash.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\hmac.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\integer.c" />
+    <ClCompile Include="..\..\src\internal.c" />
+    <ClCompile Include="..\..\src\wolfio.c" />
+    <ClCompile Include="..\..\src\keys.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\logging.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\md5.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\memory.c" />
+    <ClCompile Include="..\..\src\ocsp.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\sha3.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\wc_port.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\pwdbased.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\random.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\rsa.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\sha.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\sha256.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\sha512.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\signature.c" />
+    <ClCompile Include="..\..\src\ssl.c" />
+    <ClCompile Include="..\..\src\tls.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\wc_encrypt.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\wolfcrypt_first.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\wolfcrypt_last.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\wolfmath.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\wolfevent.c" />
+    <ClCompile Include="..\..\wolfcrypt\src\pkcs12.c" />
+  </ItemGroup>
+  <ItemGroup>
+    <CustomBuild Include="..\..\wolfcrypt\src\aes_asm.asm">
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">false</ExcludedFromBuild>
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='DLL Debug|x64'">false</ExcludedFromBuild>
+      <Command Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">ml64.exe /DHAVE_FIPS /DHAVE_FIPS_VERSION=2 /c /Zi /Fo"$(IntDir)%(Filename).obj" %(Identity)</Command>
+      <Command Condition="'$(Configuration)|$(Platform)'=='DLL Debug|x64'">ml64.exe /DHAVE_FIPS /DHAVE_FIPS_VERSION=2 /c /Zi /Fo"$(IntDir)%(Filename).obj" %(Identity)</Command>
+      <Outputs Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(IntDir)%(Filename).obj</Outputs>
+      <Outputs Condition="'$(Configuration)|$(Platform)'=='DLL Debug|x64'">$(IntDir)%(Filename).obj</Outputs>
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</ExcludedFromBuild>
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='DLL Release|x64'">false</ExcludedFromBuild>
+      <Command Condition="'$(Configuration)|$(Platform)'=='Release|x64'">ml64.exe /DHAVE_FIPS /DHAVE_FIPS_VERSION=2 /c /Zi /Fo"$(IntDir)%(Filename).obj" %(Identity)</Command>
+      <Command Condition="'$(Configuration)|$(Platform)'=='DLL Release|x64'">ml64.exe /DHAVE_FIPS /DHAVE_FIPS_VERSION=2 /c /Zi /Fo"$(IntDir)%(Filename).obj" %(Identity)</Command>
+      <Outputs Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(IntDir)%(Filename).obj</Outputs>
+      <Outputs Condition="'$(Configuration)|$(Platform)'=='DLL Release|x64'">$(IntDir)%(Filename).obj</Outputs>
+    </CustomBuild>
+  </ItemGroup>
+  <ItemGroup>
+    <ClInclude Include="user_settings.h" />
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

IDE/include.am

@@ -4,6 +4,7 @@
 
 include IDE/XCODE/include.am
 include IDE/WIN/include.am
+include IDE/WIN10/include.am
 include IDE/WIN-SGX/include.am
 include IDE/LINUX-SGX/include.am
 include IDE/WORKBENCH/include.am

Makefile.am

@@ -207,3 +207,7 @@ merge-clean:
 	@find ./ | $(GREP) \.OTHER | xargs rm -f
 	@find ./ | $(GREP) \.BASE | xargs rm -f
 	@find ./ | $(GREP) \~$$ | xargs rm -f
+
+dist-hook:
+	cp $(distdir)/wolfssl/options.h.in $(distdir)/wolfssl/options.h
+

README

@@ -44,7 +44,7 @@ Note 1)
 wolfSSL as of 3.6.6 no longer enables SSLv3 by default.  wolfSSL also no
 longer supports static key cipher suites with PSK, RSA, or ECDH.  This means
 if you plan to use TLS cipher suites you must enable DH (DH is on by default),
-or enable ECC (ECC is on by default on 64bit systems), or you must enable static
+or enable ECC (ECC is on by default), or you must enable static
 key cipher suites with
     WOLFSSL_STATIC_DH
     WOLFSSL_STATIC_RSA

README.md

@@ -33,7 +33,7 @@ There are many reasons to choose wolfSSL as your embedded SSL solution. Some of
 wolfSSL as of 3.6.6 no longer enables SSLv3 by default.  wolfSSL also no
 longer supports static key cipher suites with PSK, RSA, or ECDH.  This means
 if you plan to use TLS cipher suites you must enable DH (DH is on by default),
-or enable ECC (ECC is on by default on 64bit systems), or you must enable static
+or enable ECC (ECC is on by default), or you must enable static
 key cipher suites with
     WOLFSSL_STATIC_DH
     WOLFSSL_STATIC_RSA

SCRIPTS-LIST

@@ -10,6 +10,8 @@ commit-tests.sh - our commit tests, must pass before a commit is accepted, use
 fips-check.sh - checks if current wolfSSL version works against FIPS wolfCrypt
                 comment out last line to leave working directory
 
+async-check.sh - internal script for validating wolfSSL Async using the simulator.
+
 gencertbuf.pl - creates certs_test.h, our certs / keys C array for easy non
                 filesystem testing
 

async-check.sh

@@ -0,0 +1,80 @@
+#!/bin/bash
+
+# async-check.sh
+
+# This script creates symbolic links to the required asynchronous 
+# file for using the asynchronous simulator and make check
+#
+#     $ ./async-check [keep]
+#
+#     - keep: (default off) ./async and links kept around for inspection
+#
+
+function Usage() {
+    printf '\n%s\n' "Usage: $0 [keep]"
+    printf '\n%s\n\n' "Where \"keep\" means keep (default off) async files around for inspection"
+    printf '%s\n' "EXAMPLE:"
+    printf '%s\n' "---------------------------------"
+    printf '%s\n' "./async-check.sh keep"
+    printf '%s\n\n' "---------------------------------"
+}
+
+ASYNC_REPO=git@github.com:wolfSSL/wolfAsyncCrypt.git
+#ASYNC_REPO=../wolfAsyncCrypt
+
+# Optionally keep async files
+if [ "x$1" == "xkeep" ]; then KEEP="yes"; else KEEP="no"; fi
+
+
+if [ -d ./async ];
+then
+    echo "\n\nUsing existing async repo\n\n"
+else
+    # make a clone of the wolfAsyncCrypt repository
+    git clone $ASYNC_REPO async
+    [ $? -ne 0 ] && echo "\n\nCouldn't checkout the wolfAsyncCrypt repository\n\n" && exit 1  
+fi
+
+# setup auto-conf
+./autogen.sh
+
+
+# link files
+ln -s -F ../../async/wolfcrypt/src/async.c ./wolfcrypt/src/async.c
+ln -s -F ../../async/wolfssl/wolfcrypt/async.h ./wolfssl/wolfcrypt/async.h
+ln -s -F ../../../../async/wolfcrypt/src/port/intel/quickassist.c ./wolfcrypt/src/port/intel/quickassist.c
+ln -s -F ../../../../async/wolfcrypt/src/port/intel/quickassist_mem.c ./wolfcrypt/src/port/intel/quickassist_mem.c
+ln -s -F ../../../../async/wolfcrypt/src/port/intel/README.md ./wolfcrypt/src/port/intel/README.md
+ln -s -F ../../../../async/wolfssl/wolfcrypt/port/intel/quickassist.h ./wolfssl/wolfcrypt/port/intel/quickassist.h
+ln -s -F ../../../../async/wolfssl/wolfcrypt/port/intel/quickassist_mem.h ./wolfssl/wolfcrypt/port/intel/quickassist_mem.h
+ln -s -F ../../../../async/wolfcrypt/src/port/cavium/cavium_nitrox.c ./wolfcrypt/src/port/cavium/cavium_nitrox.c
+ln -s -F ../../../../async/wolfssl/wolfcrypt/port/cavium/cavium_nitrox.h ./wolfssl/wolfcrypt/port/cavium/cavium_nitrox.h
+ln -s -F ../../../../async/wolfcrypt/src/port/cavium/README.md ./wolfcrypt/src/port/cavium/README.md
+
+
+./configure --enable-asynccrypt --enable-all
+make check
+[ $? -ne 0 ] && echo "\n\nMake check failed. Debris left for analysis." && exit 1
+
+
+# Clean up
+popd
+if [ "x$KEEP" == "xno" ];
+then
+    unlink ./wolfcrypt/src/async.c
+    unlink ./wolfssl/wolfcrypt/async.h
+    unlink ./wolfcrypt/src/port/intel/quickassist.c
+    unlink ./wolfcrypt/src/port/intel/quickassist_mem.c
+    unlink ./wolfcrypt/src/port/intel/README.md
+    unlink ./wolfssl/wolfcrypt/port/intel/quickassist.h
+    unlink ./wolfssl/wolfcrypt/port/intel/quickassist_mem.h
+    unlink ./wolfcrypt/src/port/cavium/cavium_nitrox.c
+    unlink ./wolfssl/wolfcrypt/port/cavium/cavium_nitrox.h
+    unlink ./wolfcrypt/src/port/cavium/README.md
+
+    rm -rf ./async
+
+    # restore original README.md files
+    git checkout -- wolfcrypt/src/port/cavium/README.md
+    git checkout -- wolfcrypt/src/port/intel/README.md
+fi

autogen.sh

@@ -18,7 +18,10 @@ if test -e .git; then
   # touch fips files for non fips distribution
   touch ./ctaocrypt/src/fips.c
   touch ./ctaocrypt/src/fips_test.c
-  touch ./wolfcrypt/src/fipsv2.c
+  touch ./wolfcrypt/src/fips.c
+  touch ./wolfcrypt/src/fips_test.c
+  touch ./wolfcrypt/src/wolfcrypt_first.c
+  touch ./wolfcrypt/src/wolfcrypt_last.c
   touch ./wolfssl/wolfcrypt/fips.h
 
   # touch CAVP selftest files for non-selftest distribution

certs/crl/gencrls.sh

@@ -104,4 +104,10 @@ mv tmp eccSrvCRL.pem
 # install (only needed if working outside wolfssl)
 #cp eccSrvCRL.pem ~/wolfssl/certs/crl/eccSrvCRL.pem
 
+# caEccCrl
+openssl ca -config ../ecc/wolfssl.cnf -gencrl -crldays 1000 -out caEccCrl.pem -keyfile ../ca-ecc-key.pem -cert ../ca-ecc-cert.pem
+
+# ca-ecc384-cert
+openssl ca -config ../ecc/wolfssl.cnf -gencrl -crldays 1000 -out caEcc384Crl.pem -keyfile ../ca-ecc384-key.pem -cert ../ca-ecc384-cert.pem
+
 exit 0

certs/ed25519/gen-ed25519.sh

@@ -0,0 +1,18 @@
+#!/bin/bash
+
+EXAMPLE=$1
+echo "This uses ed25519 certificate generator from wolfssl-examples github"
+echo "The script takes in the directory to wolfssl-examples"
+
+pushd ${EXAMPLE}
+make
+if [ $? -ne 0 ]; then
+    echo "Unable to build example"
+    exit 1
+fi
+
+./tls.sh
+popd
+mv ${EXAMPLE}/*.pem .
+mv ${EXAMPLE}/*.der .
+

certs/renewcerts.sh

@@ -8,6 +8,10 @@
 #                       client-ecc-cert.der
 #                       ca-cert.pem
 #                       ca-cert.der
+#                       ca-ecc-cert.pem
+#                       ca-ecc-cert.der
+#                       ca-ecc384-cert.pem
+#                       ca-ecc384-cert.der
 #                       server-cert.pem
 #                       server-cert.der
 #                       server-ecc-rsa.pem
@@ -17,6 +21,7 @@
 #                       server-ecc-comp.pem
 #                       client-ca.pem
 #                       test/digsigku.pem
+#                       ecc-privOnlyCert.pem
 # updates the following crls:
 #                       crl/cliCrl.pem
 #                       crl/crl.pem
@@ -100,12 +105,38 @@ function run_renewcerts(){
     openssl x509 -in ca-cert.pem -text > tmp.pem
     mv tmp.pem ca-cert.pem
     ############################################################
+    ########## update the self-signed ca-ecc-cert.pem ##########
+    ############################################################
+    echo "Updating ca-ecc-cert.pem"
+    echo ""
+    #pipe the following arguments to openssl req...
+    echo -e  "US\nWashington\nSeattle\nwolfSSL\nDevelopment\nwww.wolfssl.com\ninfo@wolfssl.com\n.\n.\n" | openssl req -new -key ca-ecc-key.pem -nodes -out ca-ecc-cert.csr
+
+    openssl x509 -req -in ca-ecc-cert.csr -days 1000 -extfile wolfssl.cnf -extensions ca_ecc_cert -signkey ca-ecc-key.pem -out ca-ecc-cert.pem
+    rm ca-ecc-cert.csr
+
+    openssl x509 -in ca-ecc-cert.pem -text > tmp.pem
+    mv tmp.pem ca-ecc-cert.pem
+    ############################################################
+    ########## update the self-signed ca-ecc384-cert.pem #######
+    ############################################################
+    echo "Updating ca-ecc384-cert.pem"
+    echo ""
+    #pipe the following arguments to openssl req...
+    echo -e  "US\nWashington\nSeattle\nwolfSSL\nDevelopment\nwww.wolfssl.com\ninfo@wolfssl.com\n.\n.\n" | openssl req -new -key ca-ecc384-key.pem -nodes -sha384 -out ca-ecc384-cert.csr
+
+    openssl x509 -req -in ca-ecc384-cert.csr -days 1000 -extfile wolfssl.cnf -extensions ca_ecc_cert -signkey ca-ecc384-key.pem -sha384 -out ca-ecc384-cert.pem
+    rm ca-ecc384-cert.csr
+
+    openssl x509 -in ca-ecc384-cert.pem -text > tmp.pem
+    mv tmp.pem ca-ecc384-cert.pem
+    ############################################################
     ##### update the self-signed (1024-bit) ca-cert.pem ########
     ############################################################
     echo "Updating 1024-bit ca-cert.pem"
     echo ""
     #pipe the following arguments to openssl req...
-    echo -e  "US\nMontana\nBozeman\nSawtooth\nConsulting_1024\nwww.wolfssl.com\ninfo@wolfssl.com\n.\n.\n" | openssl req -new -key \1024/ca-key.pem -nodes -out \1024/ca-cert.csr
+    echo -e  "US\nMontana\nBozeman\nSawtooth\nConsulting_1024\nwww.wolfssl.com\ninfo@wolfssl.com\n.\n.\n" | openssl req -new -key \1024/ca-key.pem -nodes -sha1 -out \1024/ca-cert.csr
 
     openssl x509 -req -in \1024/ca-cert.csr -days 1000 -extfile wolfssl.cnf -extensions wolfssl_opts -signkey \1024/ca-key.pem -out \1024/ca-cert.pem
     rm \1024/ca-cert.csr
@@ -169,7 +200,7 @@ function run_renewcerts(){
     echo "Updating 1024-bit server-cert.pem"
     echo ""
     #pipe the following arguments to openssl req...
-    echo -e "US\nMontana\nBozeman\nwolfSSL\nSupport_1024\nwww.wolfssl.com\ninfo@wolfssl.com\n.\n.\n" | openssl req -new -key \1024/server-key.pem -nodes > \1024/server-req.pem
+    echo -e "US\nMontana\nBozeman\nwolfSSL\nSupport_1024\nwww.wolfssl.com\ninfo@wolfssl.com\n.\n.\n" | openssl req -new -key \1024/server-key.pem -nodes -sha1 > \1024/server-req.pem
 
     openssl x509 -req -in \1024/server-req.pem -extfile wolfssl.cnf -extensions wolfssl_opts -days 1000 -CA \1024/ca-cert.pem -CAkey \1024/ca-key.pem -set_serial 01 > \1024/server-cert.pem
 
@@ -209,7 +240,7 @@ function run_renewcerts(){
     mv tmp.pem client-ecc-cert.pem
 
     ############################################################
-    ########## update the self-signed server-ecc.pem ###########
+    ########## update the server-ecc.pem #######################
     ############################################################
     echo "Updating server-ecc.pem"
     echo ""
@@ -217,7 +248,7 @@ function run_renewcerts(){
     echo -e "US\nWashington\nSeattle\nEliptic\nECC\nwww.wolfssl.com\ninfo@wolfssl.com\n.\n.\n" | openssl req -new -key ecc-key.pem -nodes -out server-ecc.csr
 
 
-    openssl x509 -req -in server-ecc.csr -days 1000 -extfile wolfssl.cnf -extensions wolfssl_opts -signkey ecc-key.pem -out server-ecc.pem
+    openssl x509 -req -in server-ecc.csr -days 1000 -extfile wolfssl.cnf -extensions server_ecc -CAfile ca-ecc-cert.pem -CAkey ca-ecc-key.pem -out server-ecc.pem
     rm server-ecc.csr
 
     openssl x509 -in server-ecc.pem -text > tmp.pem
@@ -244,6 +275,18 @@ function run_renewcerts(){
     echo ""
     cat client-cert.pem client-ecc-cert.pem > client-ca.pem
 
+    ############################################################
+    ###### update the self-signed ecc-privOnlyCert.pem #########
+    ############################################################
+    echo "Updating ecc-privOnlyCert.pem"
+    echo ""
+    #pipe the following arguments to openssl req...
+    echo -e ".\n.\n.\nWR\n.\nDE\n.\n.\n.\n" | openssl req -new -key ecc-privOnlyKey.pem -nodes -out ecc-privOnly.csr
+
+
+    openssl x509 -req -in ecc-privOnly.csr -days 1000 -signkey ecc-privOnlyKey.pem -out ecc-privOnlyCert.pem
+    rm ecc-privOnly.csr
+
     ############################################################
     ###### update the self-signed test/digsigku.pem   ##########
     ############################################################
@@ -263,10 +306,15 @@ function run_renewcerts(){
     ############################################################
     ########## make .der files from .pem files #################
     ############################################################
-    openssl x509 -inform PEM -in \1024/client-cert.pem -outform DER -out \1024/client-cert.der
     echo "Creating der formatted certs..."
     echo ""
+    openssl x509 -inform PEM -in \1024/client-cert.pem -outform DER -out \1024/client-cert.der
+    openssl x509 -inform PEM -in \1024/server-cert.pem -outform DER -out \1024/server-cert.der
+    openssl x509 -inform PEM -in \1024/ca-cert.pem -outform DER -out \1024/ca-cert.der
+
     openssl x509 -inform PEM -in ca-cert.pem -outform DER -out ca-cert.der
+    openssl x509 -inform PEM -in ca-ecc-cert.pem -outform DER -out ca-ecc-cert.der
+    openssl x509 -inform PEM -in ca-ecc384-cert.pem -outform DER -out ca-ecc384-cert.der
     openssl x509 -inform PEM -in client-cert.pem -outform DER -out client-cert.der
     openssl x509 -inform PEM -in server-cert.pem -outform DER -out server-cert.der
     openssl x509 -inform PEM -in client-ecc-cert.pem -outform DER -out client-ecc-cert.der
@@ -281,6 +329,57 @@ function run_renewcerts(){
     echo ""
     echo "" | openssl pkcs12 -des3 -descert -export -in server-ecc-rsa.pem -inkey ecc-key.pem -certfile server-ecc.pem -out ecc-rsa-server.p12 -password stdin
 
+    ############################################################
+    ###### update the test-servercert.p12 file #################
+    ############################################################
+    echo "Updating test-servercert.p12 (password is \"wolfSSL test\")"
+    echo ""
+    echo "wolfSSL test" | openssl pkcs12 -des3 -descert -export -in server-cert.pem -inkey server-key.pem -certfile ca-cert.pem -out test-servercert.p12 -password stdin
+
+    ############################################################
+    ###### calling gen-ext-certs.sh           ##################
+    ############################################################
+    echo "Calling gen-ext-certs.sh"
+    echo ""
+    cd ..
+    ./certs/test/gen-ext-certs.sh
+    cd ./certs
+
+    ############################################################
+    ###### calling gen-badsig.sh              ##################
+    ############################################################
+    echo "Calling gen-badsig.sh"
+    echo ""
+    cd ./test
+    ./gen-badsig.sh
+    cd ../
+
+    ############################################################
+    ########## generate ocsp certs        ######################
+    ############################################################
+    echo "Changing directory to ocsp..."
+    echo ""
+
+    # guard against recursive calls to renewcerts.sh
+    if [ -d ocsp ]; then
+        cd ./ocsp
+        echo "Execute ./renewcerts.sh..."
+        ./renewcerts.sh
+        cd ../
+    else
+        echo "Error could not find ocsp directory"
+        exit 1
+    fi
+
+    ############################################################
+    ###### calling assemble-chains.sh         ##################
+    ############################################################
+    echo "Calling assemble-chains.sh"
+    echo ""
+    cd ./test-pathlen
+    ./assemble-chains.sh
+    cd ../
+
     ############################################################
     ########## store DER files as buffers ######################
     ############################################################
@@ -350,6 +449,19 @@ then
     echo "changed directory to wolfssl root directory."
     echo ""
 
+    echo ""
+    echo "Enter directory to ed25519 certificate generation example."
+    echo "Can be found at https://github.com/wolfSSL/wolfssl-examples"
+    read ED25519_DIR
+    if [ -d "${ED25519_DIR}" ]; then
+        pushd ./certs/ed25519
+        ./gen-ed25519.sh ${ED25519_DIR}
+        popd
+    else
+        echo "Unable to find directory ${ED25519_DIR}"
+        exit 1
+    fi
+
     ############################################################
     ########## update ntru if already installed ################
     ############################################################
@@ -367,11 +479,21 @@ elif [ ! -z "$1" ]; then
     if [ "$1" == "--override-ntru" ]; then
         echo "overriding ntru, update all certs except ntru."
         run_renewcerts
+    #valid argument create ed25519 certificates
+    elif [ "$1" == "--ed25519" ] || [ "$2" == "--ed25519" ]; then
+        echo ""
+        echo "Enter directory to ed25519 certificate generation example."
+        echo "Can be found at https://github.com/wolfSSL/wolfssl-examples"
+        read ED25519_DIR
+        pushd ./certs/ed25519
+        ./gen-ed25519.sh ${ED25519_DIR}
+        popd
     #valid argument print out other valid arguments
     elif [ "$1" == "-h" ] || [ "$1" == "-help" ]; then
         echo ""
         echo "\"no argument\"        will attempt to update all certificates"
         echo "--override-ntru      updates all certificates except ntru"
+        echo "--ed25519            updates all ed25519 certificates"
         echo "-h or -help          display this menu"
         echo ""
         echo ""
@@ -441,3 +563,4 @@ else
     fi #END now defined
 fi #END already defined
 
+exit 0

certs/renewcerts/wolfssl.cnf

@@ -125,6 +125,40 @@ subjectKeyIdentifier=hash
 authorityKeyIdentifier=keyid:always,issuer:always
 basicConstraints=CA:true
 
+# CA with pathlen 0
+[ pathlen_0 ]
+subjectKeyIdentifier=hash
+authorityKeyIdentifier=keyid:always,issuer:always
+basicConstraints=CA:true,pathlen:0
+keyUsage=keyCertSign, cRLSign
+
+# CA with pathlen 1
+[ pathlen_1 ]
+subjectKeyIdentifier=hash
+authorityKeyIdentifier=keyid:always,issuer:always
+basicConstraints=CA:true,pathlen:1
+keyUsage=keyCertSign, cRLSign
+
+# CA with pathlen 127
+[ pathlen_127 ]
+subjectKeyIdentifier=hash
+authorityKeyIdentifier=keyid:always,issuer:always
+basicConstraints=CA:true,pathlen:127
+keyUsage=keyCertSign, cRLSign
+
+# CA with pathlen 128
+[ pathlen_128 ]
+subjectKeyIdentifier=hash
+authorityKeyIdentifier=keyid:always,issuer:always
+basicConstraints=CA:true,pathlen:128
+keyUsage=keyCertSign, cRLSign
+
+# test pathlen server cert
+[ test_pathlen ]
+subjectKeyIdentifier=hash
+authorityKeyIdentifier=keyid:always,issuer:always
+basicConstraints=CA:false
+
 # Extensions to add to a certificate request
 [ v3_req ]
 basicConstraints = CA:FALSE
@@ -170,6 +204,22 @@ authorityKeyIdentifier=keyid:always,issuer:always
 basicConstraints=critical, CA:TRUE
 keyUsage=critical, nonRepudiation, keyEncipherment
 
+# ca-ecc-cert extensions
+[ ca_ecc_cert ]
+subjectKeyIdentifier=hash
+authorityKeyIdentifier=keyid:always
+basicConstraints=critical, CA:TRUE
+keyUsage=critical, digitalSignature, keyCertSign, cRLSign
+
+# server-ecc extensions
+[ server_ecc ]
+subjectKeyIdentifier=hash
+authorityKeyIdentifier=keyid:always
+basicConstraints=critical, CA:FALSE
+keyUsage=critical, digitalSignature, keyEncipherment, keyAgreement
+extendedKeyUsage=serverAuth
+nsCertType=server
+
 #tsa default
 [ tsa ]
 default_tsa = tsa_config1

certs/test-pathlen/assemble-chains.sh

@@ -1,8 +1,192 @@
 #!/bin/bash
 #
 # assemble-chains.sh
-# Assemble all the certificate CA path test cert chains.
+# Create certs and assemble all the certificate CA path test cert chains.
 
+
+###########################################################
+########## update server-0-ca.pem          ################
+###########################################################
+echo "Updating server-0-ca.pem"
+echo ""
+#pipe the following arguments to openssl req...
+echo -e "US\nWashington\nSeattle\nwolfSSL Inc.\nEngineering\nServer 0 CA\ninfo@wolfssl.com\n.\n.\n" | openssl req -new -key ../server-key.pem -nodes -sha1 > server-0-ca-req.pem
+
+openssl x509 -req -in server-0-ca-req.pem -extfile ../renewcerts/wolfssl.cnf -extensions pathlen_0 -days 1000 -CA ../ca-cert.pem -CAkey ../ca-key.pem -set_serial 100 -sha1 > server-0-ca.pem
+
+rm server-0-ca-req.pem
+openssl x509 -in server-0-ca.pem -text > ca_tmp.pem
+mv ca_tmp.pem server-0-ca.pem
+
+
+###########################################################
+########## update server-0-cert.pem        ################
+###########################################################
+echo "Updating server-0-cert.pem"
+echo ""
+#pipe the following arguments to openssl req...
+echo -e "US\nWashington\nSeattle\nwolfSSL Inc.\nEngineering\nServer 0\ninfo@wolfssl.com\n.\n.\n" | openssl req -new -key ../server-key.pem -nodes -sha1 > server-0-cert-req.pem
+
+openssl x509 -req -in server-0-cert-req.pem -extfile ../renewcerts/wolfssl.cnf -extensions test_pathlen -days 1000 -CA server-0-ca.pem -CAkey ../server-key.pem -set_serial 101 -sha1 > server-0-cert.pem
+
+rm server-0-cert-req.pem
+openssl x509 -in server-0-cert.pem -text > cert_tmp.pem
+mv cert_tmp.pem server-0-cert.pem
+
+
+###########################################################
+########## update server-1-ca.pem          ################
+###########################################################
+echo "Updating server-1-ca.pem"
+echo ""
+#pipe the following arguments to openssl req...
+echo -e "US\nWashington\nSeattle\nwolfSSL Inc.\nEngineering\nServer 1 CA\ninfo@wolfssl.com\n.\n.\n" | openssl req -new -key ../server-key.pem -nodes -sha1 > server-1-ca-req.pem
+
+openssl x509 -req -in server-1-ca-req.pem -extfile ../renewcerts/wolfssl.cnf -extensions pathlen_1 -days 1000 -CA ../ca-cert.pem -CAkey ../ca-key.pem -set_serial 102 -sha1 > server-1-ca.pem
+
+rm server-1-ca-req.pem
+openssl x509 -in server-1-ca.pem -text > ca_tmp.pem
+mv ca_tmp.pem server-1-ca.pem
+
+
+###########################################################
+########## update server-1-cert.pem        ################
+###########################################################
+echo "Updating server-1-cert.pem"
+echo ""
+#pipe the following arguments to openssl req...
+echo -e "US\nWashington\nSeattle\nwolfSSL Inc.\nEngineering\nServer 1\ninfo@wolfssl.com\n.\n.\n" | openssl req -new -key ../server-key.pem -nodes -sha1 > server-1-cert-req.pem
+
+openssl x509 -req -in server-1-cert-req.pem -extfile ../renewcerts/wolfssl.cnf -extensions test_pathlen -days 1000 -CA server-1-ca.pem -CAkey ../server-key.pem -set_serial 105 -sha1 > server-1-cert.pem
+
+rm server-1-cert-req.pem
+openssl x509 -in server-1-cert.pem -text > cert_tmp.pem
+mv cert_tmp.pem server-1-cert.pem
+
+
+###########################################################
+########## update server-0-1-ca.pem        ################
+###########################################################
+echo "Updating server-0-1-ca.pem"
+echo ""
+#pipe the following arguments to openssl req...
+echo -e "US\nWashington\nSeattle\nwolfSSL Inc.\nEngineering\nServer 0-1 CA\ninfo@wolfssl.com\n.\n.\n" | openssl req -new -key ../server-key.pem -nodes -sha1 > server-0-1-ca-req.pem
+
+openssl x509 -req -in server-0-1-ca-req.pem -extfile ../renewcerts/wolfssl.cnf -extensions pathlen_1 -days 1000 -CA server-0-ca.pem -CAkey ../server-key.pem -set_serial 110 -sha1 > server-0-1-ca.pem
+
+rm server-0-1-ca-req.pem
+openssl x509 -in server-0-1-ca.pem -text > ca_tmp.pem
+mv ca_tmp.pem server-0-1-ca.pem
+
+
+###########################################################
+########## update server-0-1-cert.pem      ################
+###########################################################
+echo "Updating server-0-1-cert.pem"
+echo ""
+#pipe the following arguments to openssl req...
+echo -e "US\nWashington\nSeattle\nwolfSSL Inc.\nEngineering\nServer 0-1\ninfo@wolfssl.com\n.\n.\n" | openssl req -new -key ../server-key.pem -nodes -sha1 > server-0-1-cert-req.pem
+
+openssl x509 -req -in server-0-1-cert-req.pem -extfile ../renewcerts/wolfssl.cnf -extensions test_pathlen -days 1000 -CA server-0-1-ca.pem -CAkey ../server-key.pem -set_serial 111 -sha1 > server-0-1-cert.pem
+
+rm server-0-1-cert-req.pem
+openssl x509 -in server-0-1-cert.pem -text > cert_tmp.pem
+mv cert_tmp.pem server-0-1-cert.pem
+
+
+###########################################################
+########## update server-1-0-ca.pem        ################
+###########################################################
+echo "Updating server-1-0-ca.pem"
+echo ""
+#pipe the following arguments to openssl req...
+echo -e "US\nWashington\nSeattle\nwolfSSL Inc.\nEngineering\nServer 1-0 CA\ninfo@wolfssl.com\n.\n.\n" | openssl req -new -key ../server-key.pem -nodes -sha1 > server-1-0-ca-req.pem
+
+openssl x509 -req -in server-1-0-ca-req.pem -extfile ../renewcerts/wolfssl.cnf -extensions pathlen_0 -days 1000 -CA server-1-ca.pem -CAkey ../server-key.pem -set_serial 103 -sha1 > server-1-0-ca.pem
+
+rm server-1-0-ca-req.pem
+openssl x509 -in server-1-0-ca.pem -text > ca_tmp.pem
+mv ca_tmp.pem server-1-0-ca.pem
+
+
+###########################################################
+########## update server-1-0-cert.pem      ################
+###########################################################
+echo "Updating server-1-0-cert.pem"
+echo ""
+#pipe the following arguments to openssl req...
+echo -e "US\nWashington\nSeattle\nwolfSSL Inc.\nEngineering\nServer 1-0\ninfo@wolfssl.com\n.\n.\n" | openssl req -new -key ../server-key.pem -nodes -sha1 > server-1-0-cert-req.pem
+
+openssl x509 -req -in server-1-0-cert-req.pem -extfile ../renewcerts/wolfssl.cnf -extensions test_pathlen -days 1000 -CA server-1-0-ca.pem -CAkey ../server-key.pem -set_serial 104 -sha1 > server-1-0-cert.pem
+
+rm server-1-0-cert-req.pem
+openssl x509 -in server-1-0-cert.pem -text > cert_tmp.pem
+mv cert_tmp.pem server-1-0-cert.pem
+
+
+###########################################################
+########## update server-127-ca.pem        ################
+###########################################################
+echo "Updating server-127-ca.pem"
+echo ""
+#pipe the following arguments to openssl req...
+echo -e "US\nWashington\nSeattle\nwolfSSL Inc.\nEngineering\nServer 127 CA\ninfo@wolfssl.com\n.\n.\n" | openssl req -new -key ../server-key.pem -nodes -sha1 > server-127-ca-req.pem
+
+openssl x509 -req -in server-127-ca-req.pem -extfile ../renewcerts/wolfssl.cnf -extensions pathlen_127 -days 1000 -CA ../ca-cert.pem -CAkey ../ca-key.pem -set_serial 106 -sha1 > server-127-ca.pem
+
+rm server-127-ca-req.pem
+openssl x509 -in server-127-ca.pem -text > ca_tmp.pem
+mv ca_tmp.pem server-127-ca.pem
+
+
+###########################################################
+########## update server-127-cert.pem      ################
+###########################################################
+echo "Updating server-127-cert.pem"
+echo ""
+#pipe the following arguments to openssl req...
+echo -e "US\nWashington\nSeattle\nwolfSSL Inc.\nEngineering\nServer 127\ninfo@wolfssl.com\n.\n.\n" | openssl req -new -key ../server-key.pem -nodes -sha1 > server-127-cert-req.pem
+
+openssl x509 -req -in server-127-cert-req.pem -extfile ../renewcerts/wolfssl.cnf -extensions test_pathlen -days 1000 -CA server-127-ca.pem -CAkey ../server-key.pem -set_serial 107 -sha1 > server-127-cert.pem
+
+rm server-127-cert-req.pem
+openssl x509 -in server-127-cert.pem -text > cert_tmp.pem
+mv cert_tmp.pem server-127-cert.pem
+
+
+###########################################################
+########## update server-128-ca.pem        ################
+###########################################################
+echo "Updating server-128-ca.pem"
+echo ""
+#pipe the following arguments to openssl req...
+echo -e "US\nWashington\nSeattle\nwolfSSL Inc.\nEngineering\nServer 128 CA\ninfo@wolfssl.com\n.\n.\n" | openssl req -new -key ../server-key.pem -nodes -sha1 > server-128-ca-req.pem
+
+openssl x509 -req -in server-128-ca-req.pem -extfile ../renewcerts/wolfssl.cnf -extensions pathlen_128 -days 1000 -CA ../ca-cert.pem -CAkey ../ca-key.pem -set_serial 106 -sha1 > server-128-ca.pem
+
+rm server-128-ca-req.pem
+openssl x509 -in server-128-ca.pem -text > ca_tmp.pem
+mv ca_tmp.pem server-128-ca.pem
+
+
+###########################################################
+########## update server-128-cert.pem      ################
+###########################################################
+echo "Updating server-128-cert.pem"
+echo ""
+#pipe the following arguments to openssl req...
+echo -e "US\nWashington\nSeattle\nwolfSSL Inc.\nEngineering\nServer 128\ninfo@wolfssl.com\n.\n.\n" | openssl req -new -key ../server-key.pem -nodes -sha1 > server-128-cert-req.pem
+
+openssl x509 -req -in server-128-cert-req.pem -extfile ../renewcerts/wolfssl.cnf -extensions test_pathlen -days 1000 -CA server-128-ca.pem -CAkey ../server-key.pem -set_serial 107 -sha1 > server-128-cert.pem
+
+rm server-128-cert-req.pem
+openssl x509 -in server-128-cert.pem -text > cert_tmp.pem
+mv cert_tmp.pem server-128-cert.pem
+
+
+###########################################################
+########## Assemble Chains                 ################
+###########################################################
 # Success: PathLen of 0
 ## server-0-ca.pem: signed by ca-cert.pem
 ## server-0-cert.pem: signed by server-0-ca.pem 

certs/test/gen-badaltnamenull.sh

@@ -0,0 +1,20 @@
+#!/bin/sh
+
+echo "step 1 create key"
+openssl genrsa -out server-badaltnamenull.key 2048
+
+echo "step 2 create csr"
+echo "US\nMontana\nBozeman\nEngineering\nlocalhost\n.\n" | openssl req -new -sha256 -out server-badaltnamenull.csr -key server-badaltnamenull.key -config server-badaltnamenull.conf
+
+echo "step 3 check csr"
+openssl req -text -noout -in server-badaltnamenull.csr
+
+echo "step 4 create cert"
+openssl x509 -req -days 1000 -in server-badaltnamenull.csr -signkey server-badaltnamenull.key \
+             -out server-badaltnamenull.pem -extensions req_ext -extfile server-badaltnamenull.conf
+
+echo "step 5 make human reviewable"
+openssl x509 -inform pem -in server-badaltnamenull.pem -text > tmp.pem
+mv tmp.pem server-badaltnamenull.pem
+
+openssl x509 -inform pem -in server-badaltnamenull.pem -outform der -out server-badaltnamenull.der

certs/test/gen-badsig.sh

@@ -0,0 +1,42 @@
+#!/bin/bash
+
+generate() {
+    # read in certificate and alter the last part of the signature
+    num_lines=$(wc -l < $cert)
+    i=1
+
+    rm -f $pem_out
+    touch $pem_out
+    while IFS= read -r line
+    do
+        if [[ $((i+1)) -eq ${num_lines} ]]; then
+            # last line before END tag. Alter the sig here
+            idx=`expr ${#line} - 4`
+            chr=${line:idx:1}
+            if [ "$chr" == "x" ] || [ "$chr" == "X" ]; then
+                echo "${line:0:${idx}}a${line:$((idx+1)):$((idx+4))}" >> $pem_out
+            else
+                echo "${line:0:${idx}}x${line:$((idx+1)):$((idx+4))}" >> $pem_out
+            fi
+        else
+            echo "$line" >> $pem_out
+        fi
+    let i++
+    done < "$cert"
+
+    # output to DER format also
+    openssl x509 -in $pem_out -out $der_out -outform DER
+}
+
+# create server RSA certificate with bad signature
+cert="../server-cert.pem"
+pem_out=server-cert-rsa-badsig.pem
+der_out=server-cert-rsa-badsig.der
+generate
+
+# create server ECC certificate with bad signature
+cert="../server-ecc.pem"
+pem_out=server-cert-ecc-badsig.pem
+der_out=server-cert-ecc-badsig.der
+generate
+

certs/test/include.am

@@ -17,3 +17,12 @@ EXTRA_DIST += \
          certs/test/server-cert-rsa-badsig.pem \
 		 certs/test/server-cert-ecc-badsig.der \
          certs/test/server-cert-ecc-badsig.pem
+
+
+EXTRA_DIST += \
+		 certs/test/gen-badaltnamenull.sh \
+         certs/test/server-badaltnamenull.conf \
+         certs/test/server-badaltnamenull.csr \
+         certs/test/server-badaltnamenull.key \
+         certs/test/server-badaltnamenull.pem \
+         certs/test/server-badaltnamenull.der

certs/test/server-badaltnamenull.conf

@@ -0,0 +1,17 @@
+[ req ]
+default_bits       = 2048
+distinguished_name = req_distinguished_name
+req_extensions     = req_ext
+
+[ req_distinguished_name ]
+countryName                 = US
+stateOrProvinceName         = Montana
+localityName                = Bozeman
+organizationName            = Engineering
+commonName                  = www.wolfssl.com
+commonName_max              = 64
+commonName_default          = localhost
+
+[ req_ext ]
+#subjectAltName   = localhost\0h
+subjectAltName    = DER:30:0d:82:0b:6c:6f:63:61:6c:68:6f:73:74:00:68

certs/test/server-badaltnamenull.csr

@@ -0,0 +1,17 @@
+-----BEGIN CERTIFICATE REQUEST-----
+MIICyTCCAbECAQAwWzELMAkGA1UEBhMCVVMxEDAOBgNVBAgMB01vbnRhbmExEDAO
+BgNVBAcMB0JvemVtYW4xFDASBgNVBAoMC0VuZ2luZWVyaW5nMRIwEAYDVQQDDAls
+b2NhbGhvc3QwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQDBWOI9sH7D
+UouzlAgOLJgVQEyrHw9nwxeIEqmxfU2kZZcD95DWBzExpT0mbluER8yoj6E3//LY
+58aDdASC+x/gxTLWuCNIgF9GWIOfP2TaWj9AHT6mIeklP2z9qJm3Md7UT52xOLkz
+0wblZzSjcqEY61c1MGH6xAtfYfWZgmkxej4aAKd7jR1LAXCSIx+EO2WvvA8c5fiS
+ozQgftXSM/5437VVSwu4dH4ptRNou/6nXi74cYzO4+/Unh7j/4ggwuvegNdEqeRg
+CtASpQalRN+xrqghQaj786t/kBkqH6L0KKzzcsfLi4oE6dJXn4e7SFWgzbRayp5y
+a7jal5x/6U+5AgMBAAGgKTAnBgkqhkiG9w0BCQ4xGjAYMBYGA1UdEQQPMA2CC2xv
+Y2FsaG9zdABoMA0GCSqGSIb3DQEBCwUAA4IBAQCHfMbbmvXJGKjO6Z6UOkF3f7sa
+cB8gEyjm9+Aa8gMQnaWOH8Sw6nGhGNSOVTQUIqt8EohqNCd/jrjZF34mecaJ3ycw
+ryt7AGQzQX5uutBLVr55jszVVC8EDKuPzO3jXH6h6ptvSebG/0KL0P+JHL5JvzZ1
+wAsTBtnnnrnxCQO3a2SFC4zVyH+LCP+EWehH7Sjt9FtrCIoP+xoM6AJ2tCxb4CHH
+A8WGuw36lG78DH6rs4kbh0iCP/pKYrYeG9EBOj6+Bw7WF4ee6QhL0VzHXUcIFjkp
+YlVLGBTL6KVjPW4uim1az5F1+HxZTvbAbnPU7f81M2ePmqbFfODYO1KPXycg
+-----END CERTIFICATE REQUEST-----

certs/test/server-badaltnamenull.key

@@ -0,0 +1,27 @@
+-----BEGIN RSA PRIVATE KEY-----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+-----END RSA PRIVATE KEY-----

certs/test/server-badaltnamenull.pem

@@ -0,0 +1,72 @@
+Certificate:
+    Data:
+        Version: 3 (0x2)
+        Serial Number: 15650401360786530715 (0xd931651e45f8a19b)
+    Signature Algorithm: sha1WithRSAEncryption
+        Issuer: C=US, ST=Montana, L=Bozeman, O=Engineering, CN=localhost
+        Validity
+            Not Before: May  3 16:02:13 2018 GMT
+            Not After : Jan 27 16:02:13 2021 GMT
+        Subject: C=US, ST=Montana, L=Bozeman, O=Engineering, CN=localhost
+        Subject Public Key Info:
+            Public Key Algorithm: rsaEncryption
+                Public-Key: (2048 bit)
+                Modulus:
+                    00:c1:58:e2:3d:b0:7e:c3:52:8b:b3:94:08:0e:2c:
+                    98:15:40:4c:ab:1f:0f:67:c3:17:88:12:a9:b1:7d:
+                    4d:a4:65:97:03:f7:90:d6:07:31:31:a5:3d:26:6e:
+                    5b:84:47:cc:a8:8f:a1:37:ff:f2:d8:e7:c6:83:74:
+                    04:82:fb:1f:e0:c5:32:d6:b8:23:48:80:5f:46:58:
+                    83:9f:3f:64:da:5a:3f:40:1d:3e:a6:21:e9:25:3f:
+                    6c:fd:a8:99:b7:31:de:d4:4f:9d:b1:38:b9:33:d3:
+                    06:e5:67:34:a3:72:a1:18:eb:57:35:30:61:fa:c4:
+                    0b:5f:61:f5:99:82:69:31:7a:3e:1a:00:a7:7b:8d:
+                    1d:4b:01:70:92:23:1f:84:3b:65:af:bc:0f:1c:e5:
+                    f8:92:a3:34:20:7e:d5:d2:33:fe:78:df:b5:55:4b:
+                    0b:b8:74:7e:29:b5:13:68:bb:fe:a7:5e:2e:f8:71:
+                    8c:ce:e3:ef:d4:9e:1e:e3:ff:88:20:c2:eb:de:80:
+                    d7:44:a9:e4:60:0a:d0:12:a5:06:a5:44:df:b1:ae:
+                    a8:21:41:a8:fb:f3:ab:7f:90:19:2a:1f:a2:f4:28:
+                    ac:f3:72:c7:cb:8b:8a:04:e9:d2:57:9f:87:bb:48:
+                    55:a0:cd:b4:5a:ca:9e:72:6b:b8:da:97:9c:7f:e9:
+                    4f:b9
+                Exponent: 65537 (0x10001)
+        X509v3 extensions:
+            X509v3 Subject Alternative Name: 
+                DNS:localhost
+    Signature Algorithm: sha1WithRSAEncryption
+         ae:76:ea:5e:33:2c:cf:16:c8:ec:a2:27:2a:19:b9:22:bb:69:
+         b4:96:35:f7:25:1c:dd:8b:fb:c4:a8:32:17:89:73:a0:bc:23:
+         a3:49:d4:fd:1a:d7:fc:bf:87:5d:42:12:4b:20:20:74:47:7e:
+         7c:97:89:c1:f1:a3:82:3a:58:0b:b4:05:0b:c1:02:da:a6:dc:
+         ca:6c:60:58:fe:83:1c:fc:ed:c7:bc:96:df:b2:af:31:f5:28:
+         45:2d:d5:c0:5a:42:95:c3:64:c5:46:5c:cd:8e:d6:7b:fd:9c:
+         f5:75:44:cc:d6:7e:d8:96:55:5c:00:9f:1f:ac:f1:0a:07:29:
+         0c:ba:ab:7d:1f:ac:8d:40:55:86:e4:35:1d:11:89:10:8b:c2:
+         67:ff:99:32:66:f3:5d:4a:c3:37:5e:37:32:40:7b:29:50:25:
+         e5:c1:d8:df:7b:64:3e:f7:c4:1e:01:88:fe:24:f6:0c:ea:f7:
+         72:df:1e:72:0c:9b:64:c3:6b:ec:ce:99:b1:75:61:f2:ac:d5:
+         6f:7b:7d:06:7b:6c:a8:6c:ac:46:37:dd:af:e6:cb:8f:70:d7:
+         57:e2:38:d9:e6:9a:93:da:53:06:e6:39:c5:79:6a:0a:ac:49:
+         da:04:a1:60:2f:5f:96:ef:ca:6c:34:62:6c:ac:25:1c:d5:e0:
+         f7:8e:7c:df
+-----BEGIN CERTIFICATE-----
+MIIDUzCCAjugAwIBAgIJANkxZR5F+KGbMA0GCSqGSIb3DQEBBQUAMFsxCzAJBgNV
+BAYTAlVTMRAwDgYDVQQIDAdNb250YW5hMRAwDgYDVQQHDAdCb3plbWFuMRQwEgYD
+VQQKDAtFbmdpbmVlcmluZzESMBAGA1UEAwwJbG9jYWxob3N0MB4XDTE4MDUwMzE2
+MDIxM1oXDTIxMDEyNzE2MDIxM1owWzELMAkGA1UEBhMCVVMxEDAOBgNVBAgMB01v
+bnRhbmExEDAOBgNVBAcMB0JvemVtYW4xFDASBgNVBAoMC0VuZ2luZWVyaW5nMRIw
+EAYDVQQDDAlsb2NhbGhvc3QwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIB
+AQDBWOI9sH7DUouzlAgOLJgVQEyrHw9nwxeIEqmxfU2kZZcD95DWBzExpT0mbluE
+R8yoj6E3//LY58aDdASC+x/gxTLWuCNIgF9GWIOfP2TaWj9AHT6mIeklP2z9qJm3
+Md7UT52xOLkz0wblZzSjcqEY61c1MGH6xAtfYfWZgmkxej4aAKd7jR1LAXCSIx+E
+O2WvvA8c5fiSozQgftXSM/5437VVSwu4dH4ptRNou/6nXi74cYzO4+/Unh7j/4gg
+wuvegNdEqeRgCtASpQalRN+xrqghQaj786t/kBkqH6L0KKzzcsfLi4oE6dJXn4e7
+SFWgzbRayp5ya7jal5x/6U+5AgMBAAGjGjAYMBYGA1UdEQQPMA2CC2xvY2FsaG9z
+dABoMA0GCSqGSIb3DQEBBQUAA4IBAQCudupeMyzPFsjsoicqGbkiu2m0ljX3JRzd
+i/vEqDIXiXOgvCOjSdT9Gtf8v4ddQhJLICB0R358l4nB8aOCOlgLtAULwQLaptzK
+bGBY/oMc/O3HvJbfsq8x9ShFLdXAWkKVw2TFRlzNjtZ7/Zz1dUTM1n7YllVcAJ8f
+rPEKBykMuqt9H6yNQFWG5DUdEYkQi8Jn/5kyZvNdSsM3XjcyQHspUCXlwdjfe2Q+
+98QeAYj+JPYM6vdy3x5yDJtkw2vszpmxdWHyrNVve30Ge2yobKxGN92v5suPcNdX
+4jjZ5pqT2lMG5jnFeWoKrEnaBKFgL1+W78psNGJsrCUc1eD3jnzf
+-----END CERTIFICATE-----

configure.ac

@@ -5,14 +5,16 @@
 # This file is part of wolfSSL. (formerly known as CyaSSL)
 #
 #
-
+AC_COPYRIGHT([Copyright (C) 2006-2018 wolfSSL Inc.])
 AC_INIT([wolfssl],[3.14.0],[https://github.com/wolfssl/wolfssl/issues],[wolfssl],[http://www.wolfssl.com])
 
 AC_CONFIG_AUX_DIR([build-aux])
 
-# The following sets CFLAGS to empty if unset on command line. We do not want
-# the default "-g -O2" that AC_PROG_CC sets automatically.
+# The following sets CFLAGS and CXXFLAGS to empty if unset on command line.
+# We do not want the default "-g -O2" that AC_PROG_CC AC_PROG_CXX sets
+# automatically.
 : ${CFLAGS=""}
+: ${CXXFLAGS=""}
 
 AC_CANONICAL_HOST
 AC_CANONICAL_BUILD
@@ -157,6 +159,7 @@ then
     enable_tls13=yes
     enable_openssh=yes
     enable_opensslextra=yes
+    enable_opensslall=yes
     enable_savesession=yes
     enable_savecert=yes
     enable_atomicuser=yes
@@ -218,9 +221,13 @@ then
     enable_x963kdf=yes
     enable_scrypt=yes
     enable_indef=yes
+    enable_enckeys=yes
 
-    AM_CFLAGS="-DHAVE_AES_DECRYPT $AM_CFLAGS"
-    AM_CFLAGS="-DHAVE_AES_ECB $AM_CFLAGS"
+    # Enable AES Decrypt, AES ECB, Alt Names, DER Load, Keep Certs, CRL IO with Timeout
+    AM_CFLAGS="$AM_CFLAGS -DHAVE_AES_DECRYPT -DHAVE_AES_ECB -DWOLFSSL_ALT_NAMES -DWOLFSSL_DER_LOAD -DKEEP_OUR_CERT -DKEEP_PEER_CERT -DHAVE_CRL_IO -DHAVE_IO_TIMEOUT"
+
+    # Enable DH const table speedups (eliminates `-lm` math lib dependency)
+    AM_CFLAGS="$AM_CFLAGS -DHAVE_FFDHE_2048 -DHAVE_FFDHE_3072 -DHAVE_FFDHE_4096 -DHAVE_FFDHE_6144 -DHAVE_FFDHE_8192"
 fi
 AM_CONDITIONAL([BUILD_ALL], [test "x$ENABLED_ALL" = "xyes"])
 
@@ -261,6 +268,9 @@ AC_ARG_ENABLE([singlethreaded],
 AS_IF([ test "x$ENABLED_SINGLETHREADED" = "xno" ],[
        AX_PTHREAD([
                    AC_DEFINE([HAVE_PTHREAD], [1], [Define if you have POSIX threads libraries and header files.])
+                   # If AX_PTHREAD is adding -Qunused-arguments, need to prepend with -Xcompiler libtool will use it. Newer
+                   # versions of clang don't need the -Q flag when using pthreads.
+                   AS_CASE([$PTHREAD_CFLAGS],[-Qunused-arguments*],[PTHREAD_CFLAGS="-Xcompiler $PTHREAD_CFLAGS"])
                    AM_CFLAGS="-D_POSIX_THREADS $AM_CFLAGS $PTHREAD_CFLAGS"
                    LIBS="$LIBS $PTHREAD_LIBS"
                    ],[
@@ -307,6 +317,30 @@ then
 fi
 
 
+# TLS v1.3 Draft 23
+AC_ARG_ENABLE([tls13-draft23],
+    [AS_HELP_STRING([--enable-tls13-draft23],[Enable wolfSSL TLS v1.3 Draft 23 (default: disabled)])],
+    [ ENABLED_TLS13_DRAFT23=$enableval ],
+    [ ENABLED_TLS13_DRAFT23=no ]
+    )
+if test "$ENABLED_TLS13_DRAFT23" = "yes"
+then
+  AM_CFLAGS="-DWOLFSSL_TLS13_DRAFT_23 $AM_CFLAGS"
+fi
+
+
+# TLS v1.3 Draft 26
+AC_ARG_ENABLE([tls13-draft26],
+    [AS_HELP_STRING([--enable-tls13-draft26],[Enable wolfSSL TLS v1.3 Draft 26 (default: disabled)])],
+    [ ENABLED_TLS13_DRAFT26=$enableval ],
+    [ ENABLED_TLS13_DRAFT26=no ]
+    )
+if test "$ENABLED_TLS13_DRAFT26" = "yes"
+then
+  AM_CFLAGS="-DWOLFSSL_TLS13_DRAFT_26 $AM_CFLAGS"
+fi
+
+
 # TLS v1.3
 AC_ARG_ENABLE([tls13],
     [AS_HELP_STRING([--enable-tls13],[Enable wolfSSL TLS v1.3 (default: disabled)])],
@@ -314,7 +348,7 @@ AC_ARG_ENABLE([tls13],
     [ ENABLED_TLS13=no ]
     )
 
-if test "$ENABLED_TLS13_DRAFT18" = "yes" || test "$ENABLED_TLS13_DRAFT22" = "yes"
+if test "$ENABLED_TLS13_DRAFT18" = "yes" || test "$ENABLED_TLS13_DRAFT22" = "yes" || test "$ENABLED_TLS13_DRAFT23" = "yes" || test "$ENABLED_TLS13_DRAFT26" = "yes"
 then
     ENABLED_TLS13="yes"
 fi
@@ -419,6 +453,22 @@ fi
 AM_CONDITIONAL([BUILD_RNG], [test "x$ENABLED_RNG" = "xyes"])
 
 
+
+# List of open source project defines using our openssl compatibility layer:
+# openssh (--enable-openssh)
+# nginix (--enable-nginx) WOLFSSL_NGINX
+# haproxy (--enable-haproxy) WOLFSSL_HAPROXY
+# wpa_supplicant (--enable-wpas) WOLFSSL_WPAS
+# ssl fortress (--enable-fortress) FORTRESS
+# ssl bump (--enable-bump)
+# signal (--enable-signal)
+# lighty (--enable-lighty) HAVE_LIGHTY
+# stunnel (--enable-stunnel) HAVE_STUNNEL
+# HAVE_POCO_LIB
+# WOLFSSL_MYSQL_COMPATIBLE
+# web server (--enable-webserver) HAVE_WEBSERVER
+
+
 # OpenSSH compatibility Build
 AC_ARG_ENABLE([openssh],
     [AS_HELP_STRING([--enable-openssh],[Enable OpenSSH compatibility build (default: disabled)])],
@@ -494,13 +544,25 @@ then
 fi
 
 
+# OPENSSL Compatibility ALL
+AC_ARG_ENABLE([opensslall],
+[AS_HELP_STRING([--enable-opensslall],[Enable all OpenSSL API, size++ (default: disabled)])],
+[ ENABLED_OPENSSLALL=$enableval ],
+[ ENABLED_OPENSSLALL=no ]
+)
+
+if test "$ENABLED_OPENSSLALL" = "yes"
+then
+AM_CFLAGS="-DOPENSSL_ALL $AM_CFLAGS"
+fi
+
 # OPENSSL Extra Compatibility
 AC_ARG_ENABLE([opensslextra],
     [AS_HELP_STRING([--enable-opensslextra],[Enable extra OpenSSL API, size+ (default: disabled)])],
     [ ENABLED_OPENSSLEXTRA=$enableval ],
     [ ENABLED_OPENSSLEXTRA=no ]
     )
-if test "$ENABLED_OPENSSH" = "yes" || test "$ENABLED_NGINX" = "yes" || test "$ENABLED_SIGNAL" = "yes" || test "$ENABLED_WPAS" = "yes" || test "$ENABLED_FORTRESS" = "yes" || test "$ENABLED_BUMP" = "yes" || test "$ENABLED_SNIFFER" = "yes"
+if test "$ENABLED_OPENSSH" = "yes" || test "$ENABLED_NGINX" = "yes" || test "$ENABLED_SIGNAL" = "yes" || test "$ENABLED_WPAS" = "yes" || test "$ENABLED_FORTRESS" = "yes" || test "$ENABLED_BUMP" = "yes" || test "$ENABLED_SNIFFER" = "yes" || test "$ENABLED_OPENSSLALL" = "yes"
 then
     ENABLED_OPENSSLEXTRA="yes"
 fi
@@ -525,7 +587,7 @@ fi
 
 # High Strength Build
 AC_ARG_ENABLE([maxstrength],
-    [AS_HELP_STRING([--enable-maxstrength],[Enable Max Strengh build, allows TLSv1.2-AEAD-PFS ciphers only (default: disabled)])],
+    [AS_HELP_STRING([--enable-maxstrength],[Enable Max Strength build, allows TLSv1.2-AEAD-PFS ciphers only (default: disabled)])],
     [ENABLED_MAXSTRENGTH=$enableval],
     [ENABLED_MAXSTRENGTH=no])
 
@@ -567,7 +629,7 @@ then
     AM_CFLAGS="$AM_CFLAGS -DHAVE_EXT_CACHE"
     AM_CFLAGS="$AM_CFLAGS -DWOLFSSL_ALWAYS_VERIFY_CB"
     AM_CFLAGS="$AM_CFLAGS -DWOLFSSL_AES_DIRECT -DWOLFSSL_DER_LOAD"
-    AM_CFLAGS="$AM_CFLAGS -DWOLFSSL_KEY_GEN"
+    AM_CFLAGS="$AM_CFLAGS -DWOLFSSL_KEY_GEN -DWOLFSSL_DES_ECB"
     AM_CFLAGS="$AM_CFLAGS -DWOLFSSL_WPAS"
 fi
 
@@ -1036,18 +1098,11 @@ fi
 AM_CONDITIONAL([BUILD_BLAKE2], [test "x$ENABLED_BLAKE2" = "xyes"])
 
 
-# set sha512 default
-SHA512_DEFAULT=no
-if test "$host_cpu" = "x86_64"
-then
-SHA512_DEFAULT=yes
-fi
-
 # SHA512
 AC_ARG_ENABLE([sha512],
-    [AS_HELP_STRING([--enable-sha512],[Enable wolfSSL SHA-512 support (default: enabled on x86_64)])],
+    [AS_HELP_STRING([--enable-sha512],[Enable wolfSSL SHA-512 support (default: enabled)])],
     [ ENABLED_SHA512=$enableval ],
-    [ ENABLED_SHA512=$SHA512_DEFAULT ]
+    [ ENABLED_SHA512=yes ]
     )
 
 # options that don't require sha512
@@ -1212,27 +1267,20 @@ fi
 AM_CONDITIONAL([BUILD_DSA], [test "x$ENABLED_DSA" = "xyes"])
 
 
-# set ecc default
-ECC_DEFAULT=no
-
-if test "$host_cpu" = "x86_64"
-then
-ECC_DEFAULT=yes
-fi
 
 # ECC Shamir
 AC_ARG_ENABLE([eccshamir],
-    [AS_HELP_STRING([--enable-eccshamir],[Enable ECC Shamir (default: enabled on x86_64)])],
+    [AS_HELP_STRING([--enable-eccshamir],[Enable ECC Shamir (default: enabled)])],
     [ ENABLED_ECC_SHAMIR=$enableval ],
-    [ ENABLED_ECC_SHAMIR=$ECC_DEFAULT ]
+    [ ENABLED_ECC_SHAMIR=yes ]
     )
 
 
 # ECC
 AC_ARG_ENABLE([ecc],
-    [AS_HELP_STRING([--enable-ecc],[Enable ECC (default: enabled on x86_64)])],
+    [AS_HELP_STRING([--enable-ecc],[Enable ECC (default: enabled)])],
     [ ENABLED_ECC=$enableval ],
-    [ ENABLED_ECC=$ECC_DEFAULT ]
+    [ ENABLED_ECC=yes ]
     )
 
 # lean psk doesn't need ecc
@@ -1761,6 +1809,18 @@ then
 fi
 
 
+# Base16
+AC_ARG_ENABLE([base16],
+    [AS_HELP_STRING([--enable-base16],[Enable Base16 encoding/decoding (default: disabled)])],
+    [ ENABLED_BASE16=$enableval ],
+    [ ENABLED_BASE16=no ]
+    )
+if test "$ENABLED_BASE16" = "yes"
+then
+    AM_CFLAGS="$AM_CFLAGS -DWOLFSSL_BASE16"
+fi
+
+
 # DES3
 AC_ARG_ENABLE([des3],
     [AS_HELP_STRING([--enable-des3],[Enable DES3 (default: disabled)])],
@@ -1871,7 +1931,8 @@ fi
 AS_IF([test "x$ENABLED_CMAC" = "xyes"],
       [AM_CFLAGS="$AM_CFLAGS -DWOLFSSL_CMAC -DWOLFSSL_AES_DIRECT"])
 
-AM_CONDITIONAL([BUILD_CMAC], [test "x$ENABLED_CMAC" = "xyes"])
+#AM_CONDITIONAL([BUILD_CMAC], [test "x$ENABLED_CMAC" = "xyes"])
+#moved to FIPS section
 
 
 # AES-XTS
@@ -1897,6 +1958,17 @@ then
     AM_CFLAGS="$AM_CFLAGS -DHAVE_WEBSERVER"
 fi
 
+# Web Client Build (HTTP Client)
+AC_ARG_ENABLE([webclient],
+    [AS_HELP_STRING([--enable-webclient],[Enable Web Client (HTTP) (default: disabled)])],
+    [ ENABLED_WEBCLIENT=$enableval ],
+    [ ENABLED_WEBCLIENT=no ]
+    )
+
+if test "$ENABLED_WEBCLIENT" = "yes"
+then
+    AM_CFLAGS="$AM_CFLAGS -DHAVE_HTTP_CLIENT"
+fi
 
 
 # HC128
@@ -1971,17 +2043,32 @@ then
     AM_CFLAGS="$AM_CFLAGS -DHAVE_FIPS"
     # Add the FIPS flag.
     AS_IF([test "x$FIPS_VERSION" = "xv2"],
-          [AM_CFLAGS="$AM_CFLAGS -DHAVE_FIPS_VERSION=2 -DWOLFSSL_KEY_GEN"
+          [AM_CFLAGS="$AM_CFLAGS -DHAVE_FIPS_VERSION=2 -DWOLFSSL_KEY_GEN -DWOLFSSL_SHA224 -DWOLFSSL_AES_DIRECT -DHAVE_AES_ECB -DHAVE_ECC_CDH -DWC_RSA_NO_PADDING -DFP_MAX_BITS=6144 -DWOLFSSL_VALIDATE_FFC_IMPORT"
            ENABLED_KEYGEN="yes"
+           ENABLED_SHA224="yes"
+           AS_IF([test "x$ENABLED_AESCCM" != "xyes"],
+                 [ENABLED_AESCCM="yes"
+                  AM_CFLAGS="$AM_CFLAGS -DHAVE_AESCCM"])
            AS_IF([test "x$ENABLED_RSAPSS" != "xyes"],
-			     [ENABLED_RSAPSS="yes"
-				  AM_CFLAGS="$AM_CFLAGS -DWC_RSA_PSS"])
+                 [ENABLED_RSAPSS="yes"
+                  AM_CFLAGS="$AM_CFLAGS -DWC_RSA_PSS"])
            AS_IF([test "x$ENABLED_ECC" != "xyes"],
-			     [ENABLED_ECC="yes"
-				  AM_CFLAGS="$AM_CFLAGS -DHAVE_ECC -DTFM_ECC256"
+                 [ENABLED_ECC="yes"
+                  AM_CFLAGS="$AM_CFLAGS -DHAVE_ECC -DTFM_ECC256 -DWOLFSSL_VALIDATE_ECC_IMPORT"
                   AS_IF([test "x$ENABLED_ECC_SHAMIR" = "xyes"],
                         [AM_CFLAGS="$AM_CFLAGS -DECC_SHAMIR"])])
-		  ])
+           AS_IF([test "x$ENABLED_AESCTR" != "xyes"],
+                 [ENABLED_AESCTR="yes"
+                  AM_CFLAGS="$AM_CFLAGS -DWOLFSSL_AES_COUNTER"])
+           AS_IF([test "x$ENABLED_CMAC" != "xyes"],
+                 [ENABLED_CMAC="yes"
+                  AM_CFLAGS="$AM_CFLAGS -DWOLFSSL_CMAC"])
+           AS_IF([test "x$ENABLED_HKDF" != "xyes"],
+                 [ENABLED_HKDF="yes"
+                  AM_CFLAGS="$AM_CFLAGS -DHAVE_HKDF"])
+           AS_IF([test "x$ENABLED_INTELASM" = "xyes"],
+                 [AM_CFLAGS="$AM_CFLAGS -DFORCE_FAILURE_RDSEED"])
+          ])
 else
     if test "x$ENABLED_FORTRESS" = "xyes"
     then
@@ -1991,6 +2078,7 @@ fi
 
 AM_CONDITIONAL([BUILD_FIPS], [test "x$ENABLED_FIPS" = "xyes"])
 AM_CONDITIONAL([BUILD_FIPS_V2], [test "x$FIPS_VERSION" = "xv2"])
+AM_CONDITIONAL([BUILD_CMAC], [test "x$ENABLED_CMAC" = "xyes"])
 
 # SELFTEST
 AC_ARG_ENABLE([selftest],
@@ -2009,9 +2097,9 @@ AM_CONDITIONAL([BUILD_SELFTEST], [test "x$ENABLED_SELFTEST" = "xyes"])
 
 # set sha224 default
 SHA224_DEFAULT=no
-if test "$host_cpu" = "x86_64"
+if test "$host_cpu" = "x86_64" || test "$host_cpu" = "aarch64"
 then
-    if test "x$ENABLED_FIPS" = "xno"
+    if test "x$ENABLED_FIPS" = "xno" || test "x$FIPS_VERSION" = "xv2"
     then
         SHA224_DEFAULT=yes
     fi
@@ -2019,7 +2107,7 @@ fi
 
 # SHA224
 AC_ARG_ENABLE([sha224],
-    [AS_HELP_STRING([--enable-sha224],[Enable wolfSSL SHA-224 support (default: enabled on x86_64)])],
+    [AS_HELP_STRING([--enable-sha224],[Enable wolfSSL SHA-224 support (default: enabled on x86_64/aarch64)])],
     [ ENABLED_SHA224=$enableval ],
     [ ENABLED_SHA224=$SHA224_DEFAULT ]
     )
@@ -2034,9 +2122,9 @@ AM_CONDITIONAL([BUILD_SHA224], [test "x$ENABLED_SHA224" = "xyes"])
 
 # set sha3 default
 SHA3_DEFAULT=no
-if test "$host_cpu" = "x86_64"
+if test "$host_cpu" = "x86_64" || test "$host_cpu" = "aarch64"
 then
-    if test "x$ENABLED_FIPS" = "xno"
+    if test "x$ENABLED_FIPS" = "xno" || test "x$FIPS_VERSION" = "xv2"
     then
         SHA3_DEFAULT=yes
     fi
@@ -2044,7 +2132,7 @@ fi
 
 # SHA3
 AC_ARG_ENABLE([sha3],
-    [AS_HELP_STRING([--enable-sha3],[Enable wolfSSL SHA-3 support (default: enabled on x86_64)])],
+    [AS_HELP_STRING([--enable-sha3],[Enable wolfSSL SHA-3 support (default: enabled on x86_64/aarch64)])],
     [ ENABLED_SHA3=$enableval ],
     [ ENABLED_SHA3=$SHA3_DEFAULT ]
     )
@@ -2190,7 +2278,7 @@ AC_ARG_ENABLE([ocsp],
     [ ENABLED_OCSP=no ],
     )
 
-if test "x$ENABLED_NGINX" = "xyes"
+if test "x$ENABLED_OPENSSLALL" = "xyes" || test "x$ENABLED_NGINX" = "xyes"
 then
     ENABLED_OCSP=yes
 fi
@@ -2558,7 +2646,7 @@ fi
 AC_ARG_ENABLE([supportedcurves],
     [AS_HELP_STRING([--enable-supportedcurves],[Enable Supported Elliptic Curves (default: enabled)])],
     [ENABLED_SUPPORTED_CURVES=$enableval],
-    [ENABLED_SUPPORTED_CURVES=$ECC_DEFAULT])
+    [ENABLED_SUPPORTED_CURVES=yes])
 
 if test "x$ENABLED_SUPPORTED_CURVES" = "xyes"
 then
@@ -3045,6 +3133,24 @@ fi
 AM_CONDITIONAL([BUILD_MD4], [test "x$ENABLED_MD4" = "xyes"])
 
 
+# Encrypted keys
+AC_ARG_ENABLE([enckeys],
+    [AS_HELP_STRING([--enable-enckeys],[Enable PEM encrypted private key support (default: disabled)])],
+    [ ENABLED_ENCKEYS=$enableval ],
+    [ ENABLED_ENCKEYS=no ]
+    )
+
+if test "$ENABLED_OPENSSLEXTRA" = "yes" || test "$ENABLED_WEBSERVER" = "yes"
+then
+    ENABLED_ENCKEYS=yes
+fi
+
+if test "$ENABLED_ENCKEYS" = "yes"
+then
+    AM_CFLAGS="$AM_CFLAGS -DWOLFSSL_ENCRYPTED_KEYS"
+fi
+
+
 # PWDBASED has to come after certservice since we want it on w/o explicit on
 # PWDBASED
 AC_ARG_ENABLE([pwdbased],
@@ -3055,9 +3161,9 @@ AC_ARG_ENABLE([pwdbased],
 
 if test "$ENABLED_PWDBASED" = "no"
 then
-    if test "$ENABLED_OPENSSLEXTRA" = "yes" || test "$ENABLED_WEBSERVER" = "yes"
+    if test "$ENABLED_OPENSSLEXTRA" = "yes" || test "$ENABLED_WEBSERVER" = "yes" || test "$ENABLED_ENCKEYS" = "yes"
     then
-        # opensslextra and webserver needs pwdbased
+        # opensslextra, webserver and enckeys needs pwdbased
         ENABLED_PWDBASED=yes
     else
         AM_CFLAGS="$AM_CFLAGS -DNO_PWDBASED"
@@ -3115,14 +3221,14 @@ fi
 # set fastmath default
 FASTMATH_DEFAULT=no
 
-if test "$host_cpu" = "x86_64"
+if test "$host_cpu" = "x86_64" || test "$host_cpu" = "aarch64"
 then
     FASTMATH_DEFAULT=yes
 fi
 
 # fastmath
 AC_ARG_ENABLE([fastmath],
-    [AS_HELP_STRING([--enable-fastmath],[Enable fast math ops (default: enabled on x86_64)])],
+    [AS_HELP_STRING([--enable-fastmath],[Enable fast math ops (default: enabled on x86_64/aarch64)])],
     [ ENABLED_FASTMATH=$enableval ],
     [ ENABLED_FASTMATH=$FASTMATH_DEFAULT]
     )
@@ -3278,8 +3384,8 @@ AC_ARG_WITH([cavium-v],
     [  --with-cavium-v=PATH    PATH to Cavium V/software dir ],
     [
         AC_MSG_CHECKING([for cavium])
-        CPPFLAGS="$CPPFLAGS -DHAVE_CAVIUM -DHAVE_CAVIUM_V"
-        LIB_ADD="-lrt $LIB_ADD"
+        AM_CFLAGS="$AM_CFLAGS -DHAVE_CAVIUM -DHAVE_CAVIUM_V"
+        LIB_ADD="-lrt -lcrypto $LIB_ADD"
 
         if test "x$withval" == "xyes" ; then
             AC_MSG_ERROR([need a PATH for --with-cavium])
@@ -3288,21 +3394,17 @@ AC_ARG_WITH([cavium-v],
             trycaviumdir=$withval
         fi
 
-        LDFLAGS="$AM_LDFLAGS $trycaviumdir/api/obj/cavium_common.o $trycaviumdir/api/obj/cavium_sym_crypto.o $trycaviumdir/api/obj/cavium_asym_crypto.o"
-        CPPFLAGS="$CPPFLAGS -I$trycaviumdir/include"
+        AC_CHECK_FILES([$trycaviumdir/lib/libnitrox.a], [AM_CPPFLAGS="-I$trycaviumdir/include $AM_CPPFLAGS"], [ENABLED_CAVIUM_V=no])
+        LIB_STATIC_ADD="$trycaviumdir/lib/libnitrox.a $LIB_STATIC_ADD"
 
-        #AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include "cavium_common.h"]], [[ CspShutdown(0); ]])],[ cavium_linked=yes ],[ cavium_linked=no ])
-
-        if test "x$cavium_linked" == "xno" ; then
-            AC_MSG_ERROR([cavium isn't found.
-            If it's already installed, specify its path using --with-cavium-v=/dir/])
-        else
-            AM_CFLAGS="$AM_CFLAGS -DHAVE_CAVIUM -DHAVE_CAVIUM_V"
+        if test "$ENABLED_CAVIUM_V" = "no"; then
+            AC_MSG_ERROR([Could not find Nitrox library])
         fi
-        AC_MSG_RESULT([yes])
 
         enable_shared=no
         enable_static=yes
+        enable_opensslextra=yes
+
         ENABLED_CAVIUM=yes
         ENABLED_CAVIUM_V=yes
     ],
@@ -3313,6 +3415,7 @@ AC_ARG_WITH([cavium-v],
 )
 
 AM_CONDITIONAL([BUILD_CAVIUM], [test "x$ENABLED_CAVIUM" = "xyes"])
+AM_CONDITIONAL([BUILD_CAVIUM_V], [test "x$ENABLED_CAVIUM_V" = "xyes"])
 
 
 # Intel Quick Assist
@@ -3438,7 +3541,7 @@ do
     break;;
   esac
 done
-  
+
 ENABLED_SP=no
 if test "$ENABLED_RSA" = "yes" && test "$ENABLED_SP_RSA" = "yes"; then
     ENABLED_SP=yes
@@ -3452,7 +3555,40 @@ if test "$ENABLED_ECC" = "yes" && test "$ENABLED_SP_ECC" = "yes"; then
     ENABLED_SP=yes
     AM_CFLAGS="$AM_CFLAGS -DWOLFSSL_HAVE_SP_ECC"
 fi
-AM_CONDITIONAL([BUILD_SP], [test "x$ENABLED_SP" = "xyes"])
+
+
+AC_ARG_ENABLE([sp-asm],
+    [AS_HELP_STRING([--enable-sp-asm],[Enable Single Precision assembly implementation (default: disabled)])],
+    [ ENABLED_SP_ASM=$enableval ],
+    [ ENABLED_SP_ASM=no ],
+    )
+if test "$ENABLED_SP_ASM" = "yes"; then
+  if test "$ENABLED_SP" = "no"; then
+    AC_MSG_ERROR([Must have SP enabled: --enable-sp])
+  fi
+  if test "$ENABLED_ASM" = "no"; then
+    AC_MSG_ERROR([Assembly code turned off])
+  fi
+
+  AM_CFLAGS="$AM_CFLAGS -DWOLFSSL_SP_ASM"
+  case $host_cpu in
+  *aarch64*)
+    AM_CFLAGS="$AM_CFLAGS -DWOLFSSL_SP_ARM64_ASM"
+    ENABLED_SP_ARM64_ASM=yes
+    ;;
+  *arm*)
+    AM_CFLAGS="$AM_CFLAGS -DWOLFSSL_SP_ARM32_ASM"
+    ENABLED_SP_ARM32_ASM=yes
+    ;;
+  *x86_64*)
+    AM_CFLAGS="$AM_CFLAGS -DWOLFSSL_SP_X86_64_ASM"
+    ENABLED_SP_X86_64_ASM=yes
+    ;;
+  *)
+    AC_MSG_ERROR([ASM not available for CPU. Supported CPUs: x86_64, aarch64, arm])
+    ;;
+  esac
+fi
 
 AC_ARG_ENABLE([sp-math],
     [AS_HELP_STRING([--enable-sp-math],[Enable Single Precision math implementation only (default: disabled)])],
@@ -3486,6 +3622,13 @@ if test "$ENABLED_SP_MATH" = "yes"; then
     AM_CFLAGS="$AM_CFLAGS -DWOLFSSL_SP_MATH"
 fi
 
+AM_CONDITIONAL([BUILD_SP], [test "x$ENABLED_SP" = "xyes"])
+AM_CONDITIONAL([BUILD_SP_C], [test "x$ENABLED_SP" = "xyes" && test "x$ENABLED_SP_ASM" = "xno" ])
+AM_CONDITIONAL([BUILD_SP_ARM64], [test "x$ENABLED_SP_ARM64_ASM" = "xyes" ])
+AM_CONDITIONAL([BUILD_SP_ARM32], [test "x$ENABLED_SP_ARM32_ASM" = "xyes" ])
+AM_CONDITIONAL([BUILD_SP_X86_64], [test "x$ENABLED_SP_X86_64_ASM" = "xyes" ])
+AM_CONDITIONAL([BUILD_SP_INT], [test "x$ENABLED_SP_MATH" = "xyes" ])
+
 # Fast RSA using Intel IPP
 ippdir="${srcdir}/IPP"
 ipplib="lib" # if autoconf guesses 32bit system changes lib directory
@@ -3791,6 +3934,14 @@ then
 fi
 
 
+# Default optimization CFLAGS enable
+AC_ARG_ENABLE([optflags],
+    [AS_HELP_STRING([--enable-optflags],[Enable default optimization CFLAGS for the compiler (default: enabled)])],
+    [ ENABLED_OPTFLAGS=$enableval ],
+    [ ENABLED_OPTFLAGS=yes ]
+    )
+
+
 # check if PSK was enabled for conditionally running psk.test script
 AM_CONDITIONAL([BUILD_PSK], [test "x$ENABLED_PSK" = "xyes"])
 
@@ -3847,8 +3998,9 @@ AS_IF([test "x$ENABLED_OCSP" = "xyes" && \
 
 # checks for pkcs7 needed enables
 AS_IF([test "x$ENABLED_PKCS7" = "xyes" && \
-       test "x$ENABLED_RSA" = "xno"],
-      [AC_MSG_ERROR([please enable rsa if enabling pkcs7.])])
+       test "x$ENABLED_RSA" = "xno" && \
+       test "x$ENABLED_ECC" = "xno"],
+      [AC_MSG_ERROR([please enable ecc or rsa if enabling pkcs7.])])
 
 AS_IF([test "x$ENABLED_PKCS7" = "xyes" && \
        test "x$ENABLED_SHA" = "xno"],
@@ -3931,7 +4083,7 @@ then
         ENABLED_AESKEYWRAP="yes"
         AM_CFLAGS="$AM_CFLAGS -DHAVE_AES_KEYWRAP -DWOLFSSL_AES_DIRECT"
     fi
-    if test "x$ENABLED_X963KDF" = "xno"
+    if test "x$ENABLED_X963KDF" = "xno" && test "$ENABLED_ECC" = "yes"
     then
         ENABLED_X963KDF="yes"
         AM_CFLAGS="$AM_CFLAGS -DHAVE_X963_KDF"
@@ -4004,6 +4156,7 @@ then
     AM_CFLAGS="$AM_CFLAGS -Wall -Wno-unused"
     if test "$ax_enable_debug" = "no"
     then
+    AS_IF([test "x$ENABLED_OPTFLAGS" = "xyes"], [
         if test "$ENABLED_FASTMATH" = "yes"
         then
             AM_CFLAGS="$AM_CFLAGS $OPTIMIZE_FAST_CFLAGS"
@@ -4014,6 +4167,7 @@ then
         else
             AM_CFLAGS="$AM_CFLAGS $OPTIMIZE_CFLAGS"
         fi
+    ])
     fi
 fi
 
@@ -4054,7 +4208,7 @@ if test "$ENABLED_DISTRO" = "no"
 then
     CFLAGS="$CFLAGS $USER_C_EXTRA_FLAGS"
 fi
-OPTION_FLAGS="$USER_CFLAGS $USER_C_EXTRA_FLAGS $AM_CFLAGS"
+OPTION_FLAGS="$USER_CFLAGS $USER_C_EXTRA_FLAGS $CPPFLAGS $AM_CFLAGS"
 
 
 
@@ -4285,6 +4439,9 @@ echo "   * SSL version 3.0:            $ENABLED_SSLV3"
 echo "   * TLS v1.0:                   $ENABLED_TLSV10"
 echo "   * TLS v1.3:                   $ENABLED_TLS13"
 echo "   * TLS v1.3 Draft 18:          $ENABLED_TLS13_DRAFT18"
+echo "   * TLS v1.3 Draft 22:          $ENABLED_TLS13_DRAFT22"
+echo "   * TLS v1.3 Draft 23:          $ENABLED_TLS13_DRAFT23"
+echo "   * TLS v1.3 Draft 26:          $ENABLED_TLS13_DRAFT26"
 echo "   * Post-handshake Auth:        $ENABLED_TLS13_POST_AUTH"
 echo "   * Early Data:                 $ENABLED_TLS13_EARLY_DATA"
 echo "   * Send State in HRR Cookie:   $ENABLED_SEND_HRR_COOKIE"

cyassl/ctaocrypt/asn.h

@@ -38,10 +38,8 @@
 
 #include <wolfssl/wolfcrypt/asn.h>
 
-#ifndef WOLFSSL_PEMCERT_TODER_DEFINED
 #ifndef NO_FILESYSTEM
-    #define CyaSSL_PemCertToDer wolfSSL_PemCertToDer
-#endif
+    #define CyaSSL_PemCertToDer wc_PemCertToDer
 #endif
 
 #endif /* CTAO_CRYPT_ASN_H */

cyassl/ssl.h

@@ -498,8 +498,8 @@
  */
 
 #define CyaSSL_accept_ex              wolfSSL_accept_ex
-#define CyaSSL_SetIORecv              wolfSSL_SetIORecv
-#define CyaSSL_SetIOSend              wolfSSL_SetIOSend
+#define CyaSSL_SetIORecv              wolfSSL_CTX_SetIORecv
+#define CyaSSL_SetIOSend              wolfSSL_CTX_SetIOSend
 #define CyaSSL_connect_ex             wolfSSL_connect_ex
 #define CyaSSL_CTX_SetCACb            wolfSSL_CTX_SetCACb
 #define CyaSSL_SetIOReadCtx           wolfSSL_SetIOReadCtx
@@ -657,7 +657,6 @@
 
 
 /* OpenSSL Compatibility Layer */
-#define CyaSSL_PemCertToDer               wolfSSL_PemCertToDer
 #define CyaSSL_get_sessionID              wolfSSL_get_sessionID
 #define CyaSSL_get_peer_count             wolfSSL_get_peer_count
 #define CyaSSL_get_chain_cert             wolfSSL_get_chain_cert

doc/README_DOXYGEN

@@ -0,0 +1,178 @@
+wolfSSL with Doxygen 1.8.13
+
+---- Dependencies ----
+
+cmake
+make
+git
+latex-see below (With pdflatex included. However the pdflatex dependency can be removed by 
+setting USE_PDFLATEX to NO in the file "Doxyfile" located at 
+doc/formats/pdf/Doxyfile )
+
+The following texlive packages were installed when creating this 
+documentation on Linux Mint:
+sudo apt install texlive
+sudo apt install texlive-latex-extra
+
+For Mac users Basic Tex from TUG is recommended. After installing BasicTex
+additional dependencies will need to be met:
+% sudo tlmgr update --self
+% sudo tlmgr install tabu varwidth multirow adjustbox collectbox sectsty tocloft collection-fontsextra
+
+---- Generating the Documentation ----
+
+If you are looking to just generate the html documentation and not interested in
+how to add your own just run one of the following commands from the main wolfssl
+directory:
+    
+    make dox (this option will make both html and pdf documentation)
+    make dox-html (only html documentation)
+    make dox-pdf  (only pdf documentation)
+
+If it is the first time running one of the above commands the command will take
+some time to run. This is because the doxygen repository must be clones and then
+built along with the time taken to make the documentation.
+
+Once documentation generation has completed to open the html use a browser to 
+open doc/html/index.html. To open the generated pdf looking for 
+refman.pdf located and doc/refman.pdf.
+
+---- Configure ----
+
+Doxygen uses a file called "Doxyfile" to hold all its values for configuration.
+If needed, to generate a fresh Doxfile run the command 
+
+    doxygen -g
+    
+Once a Doxyfile is generate there are a few options to keep in mind.
+Below are some the the settings that are currently used:
+
+   EXTRACT_ALL
+
+    - this option determines if all API are extracted or just API that is documented.    
+    
+   OPTIMIZE_OUTPUT_FOR_C
+
+    - changes the look and naming schemes used in generated documentation.
+    
+   RECURSIVE
+
+    - allows doxygen to search subdirectories in a library for documenting.
+    
+   GENERATE_LATEX
+
+    - tells doxygen whether or not to generate LATEX documentation. The Latex
+      that is generated is used to generate a PDF as well.
+
+   ENABLE_PREPROCESSING
+
+    - tells doxygen whether or not to ignore C/C++ preprocessors directives i.e #ifdef, #ifndef
+    
+   EXCLUDE
+    
+    - allows the user to specify files or directories to ignore when documenting.
+    
+   HTML_EXTRA_STYLESHEET
+    
+    -allows the user to specify their own css style sheet to use for the doxygen html.
+    
+    SHOW_USED_FILES and SHOW_FILES
+    
+    - when using groups it is important to keep these options set to yes otherwise
+    functions with documentation that are not part of a group may fail to be included
+    in the generated documentation.
+
+---- Embedding Documentation ----
+
+Doxygen API documentation should be placed in the doc/dox_comments/
+directory. The documentation should be stored in a file in this directory with the 
+same name of the file in which the API resides in the wolfssl repository. C code
+header files (*.h) should be used when writing the API documentation. If API in a 
+file is being documented for the first time be sure to add the to the top of the 
+original file:
+
+    /*!
+        \file wolfssl/PATH_TO_FILE/FILE_NAME
+    */
+
+This ensures that the file will be linked to in the doxygen generated html.
+When specifying a specific file with the \file command be sure to include part of
+the file's path so that it is a unique name. This allows for linking to files even
+when multiple files share the same name.
+
+To ensure that doxygen documents a specific API in to a desired module be sure 
+to include that module's name in the \ingroup. The current modules to choose from
+are as follows but new group can be made:
+
+    \ingroup 3DES
+    \ingroup AES
+    \ingroup ARC4
+    \ingroup BLAKE2
+    \ingroup Camellia
+    \ingroup ChaCha
+    \ingroup ChaCha20Poly1305
+    \ingroup Curve25519
+    \ingroup DSA Algorithms
+    \ingroup Diffie-Hellman
+    \ingroup ECC
+    \ingroup ED25519
+    \ingroup HC128
+    \ingroup HMAC
+    \ingroup IDEA
+    \ingroup MD2
+    \ingroup MD4
+    \ingroup MD5
+    \ingroup PKCS7
+    \ingroup Password
+    \ingroup Poly1305
+    \ingroup RIPEMD
+    \ingroup RSA
+    \ingroup Rabbit
+    \ingroup SHA
+    \ingroup SRP
+    \ingroup wolfCrypt
+    \ingroup openSSL
+    \ingroup CertManager
+    \ingroup TLS
+    \ingroup CertsKeys
+    \ingroup Setup
+    \ingroup IO
+    \ingroup Debug
+
+If one of the above modules/ groups does not fit a desired function then a new 
+group will need to be created. To do this include add a new group definition
+to the doxygen_groups.h file located at documentation/formats/pdf/doxygen_groups.h
+
+    /*!
+        \defgroup <group name> <description>
+    */
+
+The general outline when documenting within the wolfssl library in doxygen should
+look like as follows: 
+
+    /*!
+        \ingroup //if API should be in a separate module
+        
+        \brief <description of API>
+        
+        \return <name of return> <description> // each return will need \return.
+        
+        \param <name of param> <description> // stands for parameter, each parameter will need \param.
+        
+        _Example_
+        \code
+            // any example code here
+        \endcode
+        
+        \sa // stands for see also. Each API reference here should begin with \sa
+        \sa <Function>
+        \sa <Function>
+    */
+
+When adding new documentation be sure to keep the sections, \ingroup, \brief,
+\param, \return, Etc. separated with at least 1 newline. This insures that when
+doxygen attempts to generate documentation the sections do not overlap each other
+and produce errors (this is especially important when the latex is being generated).
+Once finished creating new documentation it is highly recommended to generate new
+html and pdf to ensure no errors were introduced that prevent documentation 
+generation and that the documentation shows up correctly.

doc/check_api.sh

@@ -0,0 +1,43 @@
+#!/bin/sh
+
+ls ./dox_comments/header_files/ |
+while read h_file; do
+    grep -P -h -z -o 'WOLFSSL_API(\n|\s|[^;])*;' ./dox_comments/header_files/$h_file |
+    tr '\n' ' ' | 
+    sed 's/\\n//g' |
+    sed 's/ \+/ /g' |
+    sed 's/\x00/\n/g' > dox_api.txt
+
+    find ../ -not -path '../doc/*' -name $h_file |
+    while read -r h_file_path; do
+        echo "Checking: $h_file_path"
+        grep -P -h -z -o 'WOLFSSL_API(\n|\s|[^;])*;' "$h_file_path" |
+        sed 's/#.*/ /g' |
+        tr '\n' ' ' | 
+        sed 's/\\n//g' |
+        sed 's/ \+/ /g' |
+        sed 's/\x00/\n/g' > wolf_api.txt
+        
+        api_count="$(wc -l < dox_api.txt)"
+        match_count="$(grep -Ff dox_api.txt wolf_api.txt | wc -l)"
+        if [ "$api_count" != "$match_count" ]; then
+            echo "Mistmatch"
+            echo "Dox_api: $api_count"
+            echo "Matched_api: $match_count"
+            echo "Header file: $h_file"
+            echo "Check API: "
+            sort dox_api.txt -o dox_api.txt
+            sort wolf_api.txt -o wolf_api.txt
+            comm -23 dox_api.txt wolf_api.txt
+            exit 1
+        else
+            echo "$h_file is all good"
+            break
+        fi
+    done || exit 1
+    echo 'Next...\n'
+    
+done || exit 1
+
+rm dox_api.txt
+rm wolf_api.txt

doc/dox_comments/header_files/aes.h

@@ -0,0 +1,839 @@
+/*!
+    \ingroup AES
+    \brief This function initializes an AES structure by setting the key and 
+    then setting the initialization vector.
+    
+    \return 0 On successfully setting key and initialization vector.
+    \return BAD_FUNC_ARG Returned if key length is invalid.
+    
+    \param aes pointer to the AES structure to modify
+    \param key 16, 24, or 32 byte secret key for encryption and decryption
+    \param len length of the key passed in
+    \param iv pointer to the initialization vector used to initialize the key
+    \param dir Cipher direction. Set AES_ENCRYPTION to encrypt,  or 
+    AES_DECRYPTION to decrypt.
+    
+    _Example_
+    \code
+    Aes enc;
+    int ret = 0;
+    byte key[] = { some 16, 24 or 32 byte key };
+    byte iv[]  = { some 16 byte iv };
+    if (ret = wc_AesSetKey(&enc, key, AES_BLOCK_SIZE, iv, 
+    AES_ENCRYPTION) != 0) {
+	// failed to set aes key
+    }
+    \endcode
+    
+    \sa wc_AesSetKeyDirect
+    \sa wc_AesSetIV
+*/
+WOLFSSL_API int  wc_AesSetKey(Aes* aes, const byte* key, word32 len,
+                              const byte* iv, int dir);
+/*!
+    \ingroup AES
+    \brief This function sets the initialization vector for a 
+    particular AES object. The AES object should be initialized before 
+    calling this function.
+    
+    \return 0 On successfully setting initialization vector.
+    \return BAD_FUNC_ARG Returned if AES pointer is NULL.
+    
+    \param aes pointer to the AES structure on which to set the 
+    initialization vector
+    \param iv initialization vector used to initialize the AES structure. 
+    If the value is NULL, the default action initializes the iv to 0.
+    
+    _Example_
+    \code
+    Aes enc;
+    // set enc key
+    byte iv[]  = { some 16 byte iv };
+    if (ret = wc_AesSetIV(&enc, iv) != 0) {
+	// failed to set aes iv
+    }
+    \endcode
+    
+    \sa wc_AesSetKeyDirect
+    \sa wc_AesSetKey
+*/
+WOLFSSL_API int  wc_AesSetIV(Aes* aes, const byte* iv);
+/*!
+    \ingroup AES
+    \brief Encrypts a plaintext message from the input buffer in, and places 
+    the resulting cipher text in the output buffer out using cipher block 
+    chaining with AES. This function requires that the AES object has been 
+    initialized by calling AesSetKey before a message is able to be encrypted. 
+    This function assumes that the input message is AES block length aligned. 
+    PKCS#7 style padding should be added beforehand. This differs from the 
+    OpenSSL AES-CBC methods which add the padding for you. To make the wolfSSL 
+    function and equivalent OpenSSL functions interoperate, one should specify 
+    the -nopad option in the OpenSSL command line function so that it behaves 
+    like the wolfSSL AesCbcEncrypt method and does not add extra padding 
+    during encryption.
+
+    \return 0 On successfully encrypting message.
+    \return BAD_ALIGN_E: Returned on block align error
+    
+    \param aes pointer to the AES object used to encrypt data
+    \param out pointer to the output buffer in which to store the ciphertext 
+    of the encrypted message
+    \param in pointer to the input buffer containing message to be encrypted
+    \param sz size of input message
+    
+    _Example_
+    \code
+    Aes enc;
+    int ret = 0;
+    // initialize enc with AesSetKey, using direction AES_ENCRYPTION
+    byte msg[AES_BLOCK_SIZE * n]; // multiple of 16 bytes
+    // fill msg with data
+    byte cipher[AES_BLOCK_SIZE * n]; // Some multiple of 16 bytes
+    if ((ret = wc_AesCbcEncrypt(&enc, cipher, message, sizeof(msg))) != 0 ) {
+	// block align error
+    }
+    \endcode
+    
+    \sa wc_AesSetKey
+    \sa wc_AesSetIV
+    \sa wc_AesCbcDecrypt
+*/
+WOLFSSL_API int  wc_AesCbcEncrypt(Aes* aes, byte* out,
+                                  const byte* in, word32 sz);
+/*!
+    \ingroup AES 
+    \brief Decrypts a cipher from the input buffer in, and places the 
+    resulting plain text in the output buffer out using cipher block chaining 
+    with AES. This function requires that the AES structure has been 
+    initialized by calling AesSetKey before a message is able to be decrypted. 
+    This function assumes that the original message was AES block length 
+    aligned. This differs from the OpenSSL AES-CBC methods which do not 
+    require alignment as it adds PKCS#7 padding automatically. To make the 
+    wolfSSL function and equivalent OpenSSL functions interoperate, one 
+    should specify the -nopad option in the OpenSSL command line function 
+    so that it behaves like the wolfSSL AesCbcEncrypt method and does not 
+    create errors during decryption.
+
+    \return 0 On successfully decrypting message.
+    \return BAD_ALIGN_E Returned on block align error.
+    
+    \param aes pointer to the AES object used to decrypt data.
+    \param out pointer to the output buffer in which to store the plain text 
+    of the decrypted message.
+    \param in pointer to the input buffer containing cipher text to be 
+    decrypted.
+    \param sz size of input message.
+    
+    _Example_
+    \code
+    Aes dec;
+    int ret = 0;
+    // initialize dec with AesSetKey, using direction AES_DECRYPTION
+    byte cipher[AES_BLOCK_SIZE * n]; // some multiple of 16 bytes
+    // fill cipher with cipher text
+    byte plain [AES_BLOCK_SIZE * n];
+    if ((ret = wc_AesCbcDecrypt(&dec, plain, cipher, sizeof(cipher))) != 0 ) {
+	// block align error
+    }
+    \endcode
+    
+    \sa wc_AesSetKey
+    \sa wc_AesCbcEncrypt
+*/
+WOLFSSL_API int  wc_AesCbcDecrypt(Aes* aes, byte* out,
+                                  const byte* in, word32 sz);
+/*!
+    \ingroup AES
+    \brief Encrypts/Decrypts a message from the input buffer in, and places 
+    the resulting cipher text in the output buffer out using CTR mode with 
+    AES. This function is only enabled if WOLFSSL_AES_COUNTER is enabled at 
+    compile time. The AES structure should be initialized through AesSetKey 
+    before calling this function. Note that this function is used for both 
+    decryption and encryption. _NOTE:_ Regarding using same API for encryption 
+    and decryption. User should differentiate between Aes structures 
+    for encrypt/decrypt.
+    
+    \return int integer values corresponding to wolfSSL error or success
+    status
+    
+    \param aes pointer to the AES object used to decrypt data
+    \param out pointer to the output buffer in which to store the cipher 
+    text of the encrypted message
+    \param in pointer to the input buffer containing plain text to be encrypted
+    \param sz size of the input plain text
+    
+    _Example_
+    \code
+    Aes enc;
+    Aes dec;
+    // initialize enc and dec with AesSetKeyDirect, using direction 
+    AES_ENCRYPTION
+    // since the underlying API only calls Encrypt and by default calling 
+    encrypt on
+    // a cipher results in a decryption of the cipher
+    
+    byte msg[AES_BLOCK_SIZE * n]; //n being a positive integer making msg 
+    some multiple of 16 bytes
+    // fill plain with message text
+    byte cipher[AES_BLOCK_SIZE * n];
+    byte decrypted[AES_BLOCK_SIZE * n];
+    wc_AesCtrEncrypt(&enc, cipher, msg, sizeof(msg)); // encrypt plain
+    wc_AesCtrEncrypt(&dec, decrypted, cipher, sizeof(cipher)); 
+    // decrypt cipher text
+    \endcode
+    
+    \sa wc_AesSetKey
+*/
+ WOLFSSL_API int wc_AesCtrEncrypt(Aes* aes, byte* out,
+                                   const byte* in, word32 sz);
+/*!
+    \ingroup AES
+    \brief This function is a one-block encrypt of the input block, in, into 
+    the output block, out. It uses the key and iv (initialization vector) 
+    of the provided AES structure, which should be initialized with 
+    wc_AesSetKey before calling this function. It is only enabled if the 
+    configure option WOLFSSL_AES_DIRECT is enabled. __Warning:__ In nearly all 
+    use cases ECB mode is considered to be less secure. Please avoid using ECB 
+    API’s directly whenever possible
+    
+    \param aes pointer to the AES object used to encrypt data
+    \param out pointer to the output buffer in which to store the cipher 
+    text of the encrypted message
+    \param in pointer to the input buffer containing plain text to be encrypted
+    
+    _Example_
+    \code
+    Aes enc;
+    // initialize enc with AesSetKey, using direction AES_ENCRYPTION
+    byte msg [AES_BLOCK_SIZE]; // 16 bytes
+    // initialize msg with plain text to encrypt
+    byte cipher[AES_BLOCK_SIZE];
+    wc_AesEncryptDirect(&enc, cipher, msg);
+    \endcode
+    
+    \sa wc_AesDecryptDirect
+    \sa wc_AesSetKeyDirect
+*/
+ WOLFSSL_API void wc_AesEncryptDirect(Aes* aes, byte* out, const byte* in);
+/*!
+    \ingroup AES
+    \brief This function is a one-block decrypt of the input block, in, into 
+    the output block, out. It uses the key and iv (initialization vector) of 
+    the provided AES structure, which should be initialized with wc_AesSetKey 
+    before calling this function. It is only enabled if the configure option 
+    WOLFSSL_AES_DIRECT is enabled, and there is support for direct AES 
+    encryption on the system in question. __Warning:__ In nearly all use cases 
+    ECB mode is considered to be less secure. Please avoid using ECB API’s 
+    directly whenever possible
+    
+    \return none
+    
+    \param aes pointer to the AES object used to encrypt data
+    \param out pointer to the output buffer in which to store the plain 
+    text of the decrypted cipher text
+    \param in pointer to the input buffer containing cipher text to be 
+    decrypted
+    
+    _Example_
+    \code
+    Aes dec;
+    // initialize enc with AesSetKey, using direction AES_DECRYPTION
+    byte cipher [AES_BLOCK_SIZE]; // 16 bytes
+    // initialize cipher with cipher text to decrypt
+    byte msg[AES_BLOCK_SIZE];
+    wc_AesDecryptDirect(&dec, msg, cipher);
+    \endcode
+    
+    \sa wc_AesEncryptDirect
+    \sa wc_AesSetKeyDirect
+ */
+ WOLFSSL_API void wc_AesDecryptDirect(Aes* aes, byte* out, const byte* in);
+/*!
+    \ingroup AES
+    \brief This function is used to set the AES keys for CTR mode with AES. 
+    It initializes an AES object with the given key, iv 
+    (initialization vector), and encryption dir (direction). It is only 
+    enabled if the configure option WOLFSSL_AES_DIRECT is enabled. 
+    Currently wc_AesSetKeyDirect uses wc_AesSetKey internally. __Warning:__ In 
+    nearly all use cases ECB mode is considered to be less secure. Please avoid 
+    using ECB API’s directly whenever possible
+    
+    \return 0 On successfully setting the key.
+    \return BAD_FUNC_ARG Returned if the given key is an invalid length.
+    
+    \param aes pointer to the AES object used to encrypt data
+    \param key 16, 24, or 32 byte secret key for encryption and decryption
+    \param len length of the key passed in
+    \param iv initialization vector used to initialize the key
+    \param dir Cipher direction. Set AES_ENCRYPTION to encrypt,  or 
+    AES_DECRYPTION to decrypt. (See enum in wolfssl/wolfcrypt/aes.h) 
+    (NOTE: If using wc_AesSetKeyDirect with Aes Counter mode (Stream cipher) 
+    only use AES_ENCRYPTION for both encrypting and decrypting)
+    
+    _Example_
+    \code
+    Aes enc;
+    int ret = 0;
+    byte key[] = { some 16, 24, or 32 byte key };
+    byte iv[]  = { some 16 byte iv };
+    if (ret = wc_AesSetKeyDirect(&enc, key, sizeof(key), iv, 
+    AES_ENCRYPTION) != 0) {
+	// failed to set aes key
+    }
+    \endcode
+    
+    \sa wc_AesEncryptDirect
+    \sa wc_AesDecryptDirect
+    \sa wc_AesSetKey
+*/
+ WOLFSSL_API int  wc_AesSetKeyDirect(Aes* aes, const byte* key, word32 len,
+                                const byte* iv, int dir);
+/*!
+    \ingroup AES
+    \brief This function is used to set the key for AES GCM 
+    (Galois/Counter Mode). It initializes an AES object with the 
+    given key. It is only enabled if the configure option 
+    HAVE_AESGCM is enabled at compile time.
+    
+    \return 0 On successfully setting the key.
+    \return BAD_FUNC_ARG Returned if the given key is an invalid length.
+    
+    \param aes pointer to the AES object used to encrypt data
+    \param key 16, 24, or 32 byte secret key for encryption and decryption
+    \param len length of the key passed in
+    
+    _Example_
+    \code
+    Aes enc;
+    int ret = 0;
+    byte key[] = { some 16, 24,32 byte key };
+    if (ret = wc_AesGcmSetKey(&enc, key, sizeof(key)) != 0) {
+	// failed to set aes key
+    }
+    \endcode
+    
+    \sa wc_AesGcmEncrypt
+    \sa wc_AesGcmDecrypt
+*/
+ WOLFSSL_API int  wc_AesGcmSetKey(Aes* aes, const byte* key, word32 len);
+/*!
+    \ingroup AES
+    \brief This function encrypts the input message, held in the buffer in, 
+    and stores the resulting cipher text in the output buffer out. It 
+    requires a new iv (initialization vector) for each call to encrypt. 
+    It also encodes the input authentication vector, authIn, into the 
+    authentication tag, authTag.
+    
+    \return 0 On successfully encrypting the input message
+    
+    \param aes - pointer to the AES object used to encrypt data
+    \param out pointer to the output buffer in which to store the cipher text
+    \param in pointer to the input buffer holding the message to encrypt
+    \param sz length of the input message to encrypt
+    \param iv pointer to the buffer containing the initialization vector
+    \param ivSz length of the initialization vector
+    \param authTag pointer to the buffer in which to store the 
+    authentication tag
+    \param authTagSz length of the desired authentication tag
+    \param authIn pointer to the buffer containing the input 
+    authentication vector
+    \param authInSz length of the input authentication vector
+    
+    _Example_
+    \code
+    Aes enc;
+    // initialize aes structure by calling wc_AesGcmSetKey
+
+    byte plain[AES_BLOCK_LENGTH * n]; //n being a positive integer 
+    making plain some multiple of 16 bytes
+    // initialize plain with msg to encrypt
+    byte cipher[sizeof(plain)];
+    byte iv[] = // some 16 byte iv
+    byte authTag[AUTH_TAG_LENGTH];
+    byte authIn[] = // Authentication Vector
+
+    wc_AesGcmEncrypt(&enc, cipher, plain, sizeof(cipher), iv, sizeof(iv),
+			authTag, sizeof(authTag), authIn, sizeof(authIn));
+    \endcode
+    
+    \sa wc_AesGcmSetKey
+    \sa wc_AesGcmDecrypt
+*/
+ WOLFSSL_API int  wc_AesGcmEncrypt(Aes* aes, byte* out,
+                                   const byte* in, word32 sz,
+                                   const byte* iv, word32 ivSz,
+                                   byte* authTag, word32 authTagSz,
+                                   const byte* authIn, word32 authInSz);
+/*!
+    \ingroup AES
+    \brief This function decrypts the input cipher text, held in the buffer 
+    in, and stores the resulting message text in the output buffer out. 
+    It also checks the input authentication vector, authIn, against the 
+    supplied authentication tag, authTag.
+    
+    \return 0 On successfully decrypting the input message
+    \return AES_GCM_AUTH_E If the authentication tag does not match the 
+    supplied authentication code vector, authTag.
+    
+    \param aes pointer to the AES object used to encrypt data
+    \param out pointer to the output buffer in which to store the message text
+    \param in pointer to the input buffer holding the cipher text to decrypt
+    \param sz length of the cipher text to decrypt
+    \param iv pointer to the buffer containing the initialization vector
+    \param ivSz length of the initialization vector
+    \param authTag pointer to the buffer containing the authentication tag
+    \param authTagSz length of the desired authentication tag
+    \param authIn pointer to the buffer containing the input 
+    authentication vector
+    \param authInSz length of the input authentication vector
+    
+    _Example_
+    \code
+    Aes enc; //can use the same struct as was passed to wc_AesGcmEncrypt 
+    // initialize aes structure by calling wc_AesGcmSetKey if not already done
+
+    byte cipher[AES_BLOCK_LENGTH * n]; //n being a positive integer 
+    making cipher some multiple of 16 bytes
+    // initialize cipher with cipher text to decrypt
+    byte output[sizeof(cipher)];
+    byte iv[] = // some 16 byte iv
+    byte authTag[AUTH_TAG_LENGTH];
+    byte authIn[] = // Authentication Vector
+
+    wc_AesGcmDecrypt(&enc, output, cipher, sizeof(cipher), iv, sizeof(iv),
+			authTag, sizeof(authTag), authIn, sizeof(authIn));
+    \endcode
+    
+    \sa wc_AesGcmSetKey
+    \sa wc_AesGcmEncrypt
+*/
+ WOLFSSL_API int  wc_AesGcmDecrypt(Aes* aes, byte* out,
+                                   const byte* in, word32 sz,
+                                   const byte* iv, word32 ivSz,
+                                   const byte* authTag, word32 authTagSz,
+                                   const byte* authIn, word32 authInSz);
+/*!
+    \ingroup AES
+    \brief This function initializes and sets the key for a GMAC object 
+    to be used for Galois Message Authentication.
+    
+    \return 0 On successfully setting the key
+    \return BAD_FUNC_ARG Returned if key length is invalid.
+    
+    \param gmac pointer to the gmac object used for authentication
+    \param key 16, 24, or 32 byte secret key for authentication
+    \param len length of the key
+    
+    _Example_
+    \code
+    Gmac gmac;
+    key[] = { some 16, 24, or 32 byte length key };
+    wc_GmacSetKey(&gmac, key, sizeof(key));
+    \endcode
+    
+    \sa wc_GmacUpdate
+*/
+ WOLFSSL_API int wc_GmacSetKey(Gmac* gmac, const byte* key, word32 len);
+/*!
+    \ingroup AES
+    \brief This function generates the Gmac hash of the authIn input and 
+    stores the result in the authTag buffer. After running wc_GmacUpdate, 
+    one should compare the generated authTag to a known authentication tag 
+    to verify the authenticity of a message.
+    
+    \return 0 On successfully computing the Gmac hash.
+    
+    \param gmac pointer to the gmac object used for authentication
+    \param iv initialization vector used for the hash
+    \param ivSz size of the initialization vector used
+    \param authIn pointer to the buffer containing the authentication 
+    vector to verify
+    \param authInSz size of the authentication vector
+    \param authTag pointer to the output buffer in which to store the Gmac hash
+    \param authTagSz the size of the output buffer used to store the Gmac hash
+    
+    _Example_
+    \code
+    Gmac gmac;
+    key[] = { some 16, 24, or 32 byte length key };
+    iv[] = { some 16 byte length iv };
+
+    wc_GmacSetKey(&gmac, key, sizeof(key));
+    authIn[] = { some 16 byte authentication input };
+    tag[AES_BLOCK_SIZE]; // will store authentication code
+
+    wc_GmacUpdate(&gmac, iv, sizeof(iv), authIn, sizeof(authIn), tag, 
+    sizeof(tag));
+    \endcode
+    
+    \sa wc_GmacSetKey
+*/
+ WOLFSSL_API int wc_GmacUpdate(Gmac* gmac, const byte* iv, word32 ivSz,
+                               const byte* authIn, word32 authInSz,
+                               byte* authTag, word32 authTagSz);
+/*!
+    \ingroup AES
+    \brief This function sets the key for an AES object using CCM 
+    (Counter with CBC-MAC). It takes a pointer to an AES structure and 
+    initializes it with supplied key.
+    
+    \return none
+    
+    \param aes aes structure in which to store the supplied key
+    \param key 16, 24, or 32 byte secret key for encryption and decryption
+    \param keySz size of the supplied key
+    
+    _Example_
+    \code
+    Aes enc;
+    key[] = { some 16, 24, or 32 byte length key };
+
+    wc_AesCcmSetKey(&aes, key, sizeof(key));
+    \endcode
+    
+    \sa wc_AesCcmEncrypt
+    \sa wc_AesCcmDecrypt
+*/
+ WOLFSSL_API int  wc_AesCcmSetKey(Aes* aes, const byte* key, word32 keySz);
+/*!
+    \ingroup AES
+    
+    \brief This function encrypts the input message, in, into the output 
+    buffer, out, using CCM (Counter with CBC-MAC). It subsequently 
+    calculates and stores the authorization tag, authTag, from the 
+    authIn input.
+    
+    \return none
+    
+    \param aes pointer to the AES object used to encrypt data
+    \param out pointer to the output buffer in which to store the cipher text
+    \param in pointer to the input buffer holding the message to encrypt
+    \param sz length of the input message to encrypt
+    \param nonce pointer to the buffer containing the nonce 
+    (number only used once)
+    \param nonceSz length of the nonce
+    \param authTag pointer to the buffer in which to store the 
+    authentication tag
+    \param authTagSz length of the desired authentication tag
+    \param authIn pointer to the buffer containing the input 
+    authentication vector
+    \param authInSz length of the input authentication vector
+    
+    _Example_
+    \code
+    Aes enc;
+    // initialize enc with wc_AesCcmSetKey
+
+    nonce[] = { initialize nonce };
+    plain[] = { some plain text message };
+    cipher[sizeof(plain)];
+
+    authIn[] = { some 16 byte authentication input };
+    tag[AES_BLOCK_SIZE]; // will store authentication code
+
+    wc_AesCcmEncrypt(&enc, cipher, plain, sizeof(plain), nonce, sizeof(nonce),
+			tag, sizeof(tag), authIn, sizeof(authIn));
+    \endcode
+    
+    \sa wc_AesCcmSetKey
+    \sa wc_AesCcmDecrypt
+*/
+ WOLFSSL_API int  wc_AesCcmEncrypt(Aes* aes, byte* out,
+                                   const byte* in, word32 inSz,
+                                   const byte* nonce, word32 nonceSz,
+                                   byte* authTag, word32 authTagSz,
+                                   const byte* authIn, word32 authInSz);
+/*!
+    \ingroup AES
+    
+    \brief This function decrypts the input cipher text, in, into 
+    the output buffer, out, using CCM (Counter with CBC-MAC). It 
+    subsequently calculates the authorization tag, authTag, from the 
+    authIn input. If the authorization tag is invalid, it sets the 
+    output buffer to zero and returns the error: AES_CCM_AUTH_E.
+    
+    \return 0 On successfully decrypting the input message
+    \return AES_CCM_AUTH_E If the authentication tag does not match the 
+    supplied authentication code vector, authTag.
+    
+    \param aes pointer to the AES object used to encrypt data
+    \param out pointer to the output buffer in which to store the cipher text
+    \param in pointer to the input buffer holding the message to encrypt
+    \param sz length of the input cipher text to decrypt
+    \param nonce pointer to the buffer containing the nonce 
+    (number only used once)
+    \param nonceSz length of the nonce
+    \param authTag pointer to the buffer in which to store the 
+    authentication tag
+    \param authTagSz length of the desired authentication tag
+    \param authIn pointer to the buffer containing the input 
+    authentication vector
+    \param authInSz length of the input authentication vector
+    
+    _Example_
+    \code
+    Aes dec;
+    // initialize dec with wc_AesCcmSetKey
+
+    nonce[] = { initialize nonce };
+    cipher[] = { encrypted message };
+    plain[sizeof(cipher)];
+
+    authIn[] = { some 16 byte authentication input };
+    tag[AES_BLOCK_SIZE] = { authentication tag received for verification };
+
+    int return = wc_AesCcmDecrypt(&dec, plain, cipher, sizeof(cipher), 
+    nonce, sizeof(nonce),tag, sizeof(tag), authIn, sizeof(authIn));
+    if(return != 0) {
+	// decrypt error, invalid authentication code
+    }
+    \endcode
+    
+    \sa wc_AesCcmSetKey
+    \sa wc_AesCcmEncrypt
+*/
+ WOLFSSL_API int  wc_AesCcmDecrypt(Aes* aes, byte* out,
+                                   const byte* in, word32 inSz,
+                                   const byte* nonce, word32 nonceSz,
+                                   const byte* authTag, word32 authTagSz,
+                                   const byte* authIn, word32 authInSz);
+/*!
+    \ingroup AES
+
+    \brief This is to help with setting keys to correct encrypt or 
+    decrypt type. It is up to user to call wc_AesXtsFree on aes key when done.
+
+    \return 0 Success
+
+    \param aes   AES keys for encrypt/decrypt process
+    \param key   buffer holding aes key | tweak key
+    \param len   length of key buffer in bytes. Should be twice that of 
+    key size.
+                 i.e. 32 for a 16 byte key.
+    \param dir   direction, either AES_ENCRYPTION or AES_DECRYPTION
+    \param heap  heap hint to use for memory. Can be NULL
+    \param devId id to use with async crypto. Can be 0
+
+    _Example_
+    \code
+    XtsAes aes;
+
+    if(wc_AesXtsSetKey(&aes, key, sizeof(key), AES_ENCRYPTION, NULL, 0) != 0)
+    {
+        // Handle error
+    }
+    wc_AesXtsFree(&aes);
+    \endcode
+
+    \sa wc_AesXtsEncrypt
+    \sa wc_AesXtsDecrypt
+    \sa wc_AesXtsFree
+*/
+WOLFSSL_API int wc_AesXtsSetKey(XtsAes* aes, const byte* key,
+         word32 len, int dir, void* heap, int devId);
+/*!
+    \ingroup AES
+
+    \brief Same process as wc_AesXtsEncrypt but uses a word64 type as the tweak
+           value instead of a byte array. This just converts the word64 to a
+           byte array and calls wc_AesXtsEncrypt.
+
+    \return 0 Success
+
+    \param aes    AES keys to use for block encrypt/decrypt
+    \param out    output buffer to hold cipher text
+    \param in     input plain text buffer to encrypt
+    \param sz     size of both out and in buffers
+    \param sector value to use for tweak
+
+    _Example_
+    \code
+    XtsAes aes;
+    unsigned char plain[SIZE];
+    unsigned char cipher[SIZE];
+    word64 s = VALUE;
+
+    //set up keys with AES_ENCRYPTION as dir
+
+    if(wc_AesXtsEncryptSector(&aes, cipher, plain, SIZE, s) != 0)
+    {
+        // Handle error
+    }
+    wc_AesXtsFree(&aes);
+    \endcode
+
+    \sa wc_AesXtsEncrypt
+    \sa wc_AesXtsDecrypt
+    \sa wc_AesXtsSetKey
+    \sa wc_AesXtsFree
+*/
+WOLFSSL_API int wc_AesXtsEncryptSector(XtsAes* aes, byte* out,
+         const byte* in, word32 sz, word64 sector);
+/*!
+    \ingroup AES
+
+    \brief Same process as wc_AesXtsDecrypt but uses a word64 type as the tweak
+           value instead of a byte array. This just converts the word64 to a
+           byte array.
+
+    \return 0 Success
+
+    \param aes    AES keys to use for block encrypt/decrypt
+    \param out    output buffer to hold plain text
+    \param in     input cipher text buffer to decrypt
+    \param sz     size of both out and in buffers
+    \param sector value to use for tweak
+
+    _Example_
+    \code
+    XtsAes aes;
+    unsigned char plain[SIZE];
+    unsigned char cipher[SIZE];
+    word64 s = VALUE;
+
+    //set up aes key with AES_DECRYPTION as dir and tweak with AES_ENCRYPTION
+
+    if(wc_AesXtsDecryptSector(&aes, plain, cipher, SIZE, s) != 0)
+    {
+        // Handle error
+    }
+    wc_AesXtsFree(&aes);
+    \endcode
+
+    \sa wc_AesXtsEncrypt
+    \sa wc_AesXtsDecrypt
+    \sa wc_AesXtsSetKey
+    \sa wc_AesXtsFree
+*/
+WOLFSSL_API int wc_AesXtsDecryptSector(XtsAes* aes, byte* out,
+         const byte* in, word32 sz, word64 sector);
+/*!
+    \ingroup AES
+
+    \brief AES with XTS mode. (XTS) XEX encryption with Tweak and cipher text
+           Stealing.
+
+    \return 0 Success
+
+    \param aes   AES keys to use for block encrypt/decrypt
+    \param out   output buffer to hold cipher text
+    \param in    input plain text buffer to encrypt
+    \param sz    size of both out and in buffers
+    \param i     value to use for tweak
+    \param iSz   size of i buffer, should always be AES_BLOCK_SIZE but having
+                 this input adds a sanity check on how the user calls the
+                 function.
+
+    _Example_
+    \code
+    XtsAes aes;
+    unsigned char plain[SIZE];
+    unsigned char cipher[SIZE];
+    unsigned char i[AES_BLOCK_SIZE];
+
+    //set up key with AES_ENCRYPTION as dir
+
+    if(wc_AesXtsEncrypt(&aes, cipher, plain, SIZE, i, sizeof(i)) != 0)
+    {
+        // Handle error
+    }
+    wc_AesXtsFree(&aes);
+    \endcode
+
+    \sa wc_AesXtsDecrypt
+    \sa wc_AesXtsSetKey
+    \sa wc_AesXtsFree
+*/
+WOLFSSL_API int wc_AesXtsEncrypt(XtsAes* aes, byte* out,
+         const byte* in, word32 sz, const byte* i, word32 iSz);
+/*!
+    \ingroup AES
+
+    \brief Same process as encryption but Aes key is AES_DECRYPTION type.
+
+    \return 0 Success
+
+    \param aes   AES keys to use for block encrypt/decrypt
+    \param out   output buffer to hold plain text
+    \param in    input cipher text buffer to decrypt
+    \param sz    size of both out and in buffers
+    \param i     value to use for tweak
+    \param iSz   size of i buffer, should always be AES_BLOCK_SIZE but having
+                 this input adds a sanity check on how the user calls the
+                 function.
+                 
+    _Example_
+    \code
+    XtsAes aes;
+    unsigned char plain[SIZE];
+    unsigned char cipher[SIZE];
+    unsigned char i[AES_BLOCK_SIZE];
+
+    //set up key with AES_DECRYPTION as dir and tweak with AES_ENCRYPTION
+
+    if(wc_AesXtsDecrypt(&aes, plain, cipher, SIZE, i, sizeof(i)) != 0)
+    {
+        // Handle error
+    }
+    wc_AesXtsFree(&aes);
+    \endcode
+
+    \sa wc_AesXtsEncrypt
+    \sa wc_AesXtsSetKey
+    \sa wc_AesXtsFree
+*/
+WOLFSSL_API int wc_AesXtsDecrypt(XtsAes* aes, byte* out,
+        const byte* in, word32 sz, const byte* i, word32 iSz);
+/*!
+    \ingroup AES
+
+    \brief This is to free up any resources used by the XtsAes structure
+
+    \return 0 Success
+
+    \param aes AES keys to free
+
+    _Example_
+    \code
+    XtsAes aes;
+
+    if(wc_AesXtsSetKey(&aes, key, sizeof(key), AES_ENCRYPTION, NULL, 0) != 0)
+    {
+        // Handle error
+    }
+    wc_AesXtsFree(&aes);
+    \endcode
+
+    \sa wc_AesXtsEncrypt
+    \sa wc_AesXtsDecrypt
+    \sa wc_AesXtsSetKey
+*/
+WOLFSSL_API int wc_AesXtsFree(XtsAes* aes);
+
+
+/*!
+    \ingroup AES
+    \brief Initialize Aes structure. Sets heap hint to be used and ID for use
+    with async hardware
+    \return 0 Success
+
+    \param aes aes structure in to initialize
+    \param heap heap hint to use for malloc / free if needed
+    \param devId ID to use with async hardware
+
+    _Example_
+    \code
+    Aes enc;
+    void* hint = NULL;
+    int devId = INVALID_DEVID; //if not using async INVALID_DEVID is default
+
+    //heap hint could be set here if used
+
+    wc_AesInit(&aes, hint, devId);
+    \endcode
+
+    \sa wc_AesSetKey
+    \sa wc_AesSetIV
+*/
+WOLFSSL_API int  wc_AesInit(Aes* aes, void* heap, int devId);
+

doc/dox_comments/header_files/arc4.h

@@ -0,0 +1,58 @@
+/*!
+    \ingroup ARC4
+    \brief This function encrypts an input message from the buffer in, placing 
+    the ciphertext in the output buffer out, or decrypts a ciphertext from the 
+    buffer in, placing the plaintext in the output buffer out, using ARC4 
+    encryption. This function is used for both encryption and decryption. 
+    Before this method may be called, one must first initialize the ARC4 
+    structure using wc_Arc4SetKey.
+    
+    \return none
+    
+    \param arc4 pointer to the ARC4 structure used to process the message
+    \param out pointer to the output buffer in which to store the 
+    processed message
+    \param in pointer to the input buffer containing the message to process
+    \param length length of the message to process
+    
+    _Example_
+    \code
+    Arc4 enc;
+    byte key[] = { key to use for encryption };
+    wc_Arc4SetKey(&enc, key, sizeof(key));
+
+    byte plain[] = { plain text to encode };
+    byte cipher[sizeof(plain)];
+    byte decrypted[sizeof(plain)];
+    // encrypt the plain into cipher
+    wc_Arc4Process(&enc, cipher, plain, sizeof(plain));
+    // decrypt the cipher 
+    wc_Arc4Process(&enc, decrypted, cipher, sizeof(cipher)); 
+    \endcode
+    
+    \sa wc_Arc4SetKey
+*/
+WOLFSSL_API int wc_Arc4Process(Arc4*, byte*, const byte*, word32);
+/*!
+    \ingroup ARC4
+    
+    \brief This function sets the key for a ARC4 object, initializing it for 
+    use as a cipher. It should be called before using it for encryption 
+    with wc_Arc4Process.
+    
+    \return none
+    
+    \param arc4 pointer to an arc4 structure to be used for encryption
+    \param key key with which to initialize the arc4 structure
+    \param length length of the key used to initialize the arc4 structure
+    
+    _Example_
+    \code
+    Arc4 enc;
+    byte key[] = { initialize with key to use for encryption };
+    wc_Arc4SetKey(&enc, key, sizeof(key));
+    \endcode
+    
+    \sa wc_Arc4Process
+*/
+WOLFSSL_API int wc_Arc4SetKey(Arc4*, const byte*, word32);

doc/dox_comments/header_files/blake2.h

@@ -0,0 +1,93 @@
+/*!
+    \ingroup BLAKE2
+    
+    \brief This function initializes a Blake2b structure for use with the 
+    Blake2 hash function.
+    
+    \return 0 Returned upon successfully initializing the Blake2b structure and 
+    setting the digest size.
+
+    \param b2b pointer to the Blake2b structure to initialize
+    \param digestSz length of the blake 2 digest to implement
+    
+    _Example_
+    \code
+    Blake2b b2b;
+    // initialize Blake2b structure with 64 byte digest
+    wc_InitBlake2b(&b2b, 64); 
+    \endcode
+    
+    \sa wc_Blake2bUpdate
+*/
+WOLFSSL_API int wc_InitBlake2b(Blake2b*, word32);
+/*!
+    \ingroup BLAKE2
+    
+    \brief This function updates the Blake2b hash with the given input data. 
+    This function should be called after wc_InitBlake2b, and repeated until 
+    one is ready for the final hash: wc_Blake2bFinal.
+    
+    \return 0 Returned upon successfully update the Blake2b structure with 
+    the given data
+    \return -1 Returned if there is a failure while compressing the input data
+    
+    \param b2b pointer to the Blake2b structure to update
+    \param data pointer to a buffer containing the data to append
+    \param sz length of the input data to append
+    
+    _Example_
+    \code
+    int ret;
+    Blake2b b2b;
+    // initialize Blake2b structure with 64 byte digest
+    wc_InitBlake2b(&b2b, 64); 
+
+    byte plain[] = { // initialize input };
+
+    ret = wc_Blake2bUpdate(&b2b, plain, sizeof(plain));
+    if( ret != 0) {
+    	// error updating blake2b
+    }
+    \endcode
+    
+    \sa wc_InitBlake2b
+    \sa wc_Blake2bFinal
+*/
+WOLFSSL_API int wc_Blake2bUpdate(Blake2b*, const byte*, word32);
+/*!
+    \ingroup BLAKE2
+    
+    \brief This function computes the Blake2b hash of the previously supplied 
+    input data. The output hash will be of length requestSz, or, if 
+    requestSz==0, the digestSz of the b2b structure. This function should be 
+    called after wc_InitBlake2b and wc_Blake2bUpdate has been processed for 
+    each piece of input data desired.
+    
+    \return 0 Returned upon successfully computing the Blake2b hash
+    \return -1 Returned if there is a failure while parsing the Blake2b hash
+    
+    \param b2b pointer to the Blake2b structure to update
+    \param final pointer to a buffer in which to store the blake2b hash. 
+    Should be of length requestSz
+    \param requestSz length of the digest to compute. When this is zero, 
+    b2b->digestSz will be used instead
+    
+    _Example_
+    \code
+    int ret;
+    Blake2b b2b;
+    byte hash[64];
+    // initialize Blake2b structure with 64 byte digest
+    wc_InitBlake2b(&b2b, 64); 
+    ... // call wc_Blake2bUpdate to add data to hash
+
+    ret = wc_Blake2bFinal(&b2b, hash, 64);
+    if( ret != 0) {
+    	// error generating blake2b hash
+    }
+    \endcode
+    
+    \sa wc_InitBlake2b
+    \sa wc_Blake2bUpdate
+*/
+WOLFSSL_API int wc_Blake2bFinal(Blake2b*, byte*, word32);

doc/dox_comments/header_files/bn.h

@@ -0,0 +1,28 @@
+/*!
+    \ingroup openSSL
+    
+    \brief This function performs the following math “r = (a^p) % m”.
+    
+    \return SSL_SUCCESS On successfully performing math operation.
+    \return SSL_FAILURE If an error case was encountered.
+    
+    \param r structure to hold result.
+    \param a value to be raised by a power.
+    \param p power to raise a by.
+    \param m modulus to use.
+    \param ctx currently not used with wolfSSL can be NULL.
+    
+    _Example_
+    \code
+    WOLFSSL_BIGNUM r,a,p,m;
+    int ret;
+    // set big number values
+    ret  = wolfSSL_BN_mod_exp(r, a, p, m, NULL);
+    // check ret value
+    \endcode
+    
+    \sa wolfSSL_BN_new
+    \sa wolfSSL_BN_free
+*/
+WOLFSSL_API int wolfSSL_BN_mod_exp(WOLFSSL_BIGNUM *r, const WOLFSSL_BIGNUM *a,
+        const WOLFSSL_BIGNUM *p, const WOLFSSL_BIGNUM *m, WOLFSSL_BN_CTX *ctx);

doc/dox_comments/header_files/camellia.h

@@ -0,0 +1,179 @@
+/*!
+    \ingroup Camellia
+    
+    \brief This function sets the key and initialization vector for a 
+    camellia object, initializing it for use as a cipher.
+    
+    \return 0 Returned upon successfully setting the key and initialization 
+    vector
+    \return BAD_FUNC_ARG returned if there is an error processing one of 
+    the input arguments
+    \return MEMORY_E returned if there is an error allocating memory with 
+    XMALLOC
+
+    \param cam pointer to the camellia structure on which to set the key and iv
+    \param key pointer to the buffer containing the 16, 24, or 32 byte key 
+    to use for encryption and decryption
+    \param len length of the key passed in
+    \param iv pointer to the buffer containing the 16 byte initialization 
+    vector for use with this camellia structure
+    
+    _Example_
+    \code
+    Camellia cam;
+    byte key[32];
+    // initialize key
+    byte iv[16];
+    // initialize iv
+    if( wc_CamelliaSetKey(&cam, key, sizeof(key), iv) != 0) { 
+    	// error initializing camellia structure
+    }
+    \endcode
+    
+    \sa wc_CamelliaEncryptDirect
+    \sa wc_CamelliaDecryptDirect
+    \sa wc_CamelliaCbcEncrypt
+    \sa wc_CamelliaCbcDecrypt
+*/
+WOLFSSL_API int  wc_CamelliaSetKey(Camellia* cam,
+                                   const byte* key, word32 len, const byte* iv);
+/*!
+    \ingroup Camellia
+    
+    \brief This function sets the initialization vector for a camellia object.
+    
+    \return 0 Returned upon successfully setting the key and initialization 
+    vector
+    \return BAD_FUNC_ARG returned if there is an error processing one of the 
+    input arguments
+    
+    \param cam pointer to the camellia structure on which to set the iv
+    \param iv pointer to the buffer containing the 16 byte initialization 
+    vector for use with this camellia structure
+    
+    _Example_
+    \code
+    Camellia cam;
+    byte iv[16];
+    // initialize iv
+    if( wc_CamelliaSetIV(&cam, iv) != 0) { 
+	// error initializing camellia structure
+    }
+    \endcode
+    
+    \sa wc_CamelliaSetKey
+*/
+WOLFSSL_API int  wc_CamelliaSetIV(Camellia* cam, const byte* iv);
+/*!
+    \ingroup Camellia
+    
+    \brief This function does a one-block encrypt using the provided camellia 
+    object. It parses the first 16 byte block from the buffer in and stores 
+    the encrypted result in the buffer out. Before using this function, one 
+    should initialize the camellia object using wc_CamelliaSetKey. 
+    
+    \return none No returns.
+    
+    \param cam pointer to the camellia structure to use for encryption
+    \param out pointer to the buffer in which to store the encrypted block
+    \param in pointer to the buffer containing the plaintext block to encrypt
+    
+    _Example_
+    \code
+    Camellia cam;
+    // initialize cam structure with key and iv
+    byte plain[] = { // initialize with message to encrypt };
+    byte cipher[16];
+    
+    wc_CamelliaEncryptDirect(&ca, cipher, plain);
+    \endcode
+    
+    \sa wc_CamelliaDecryptDirect
+*/
+WOLFSSL_API int  wc_CamelliaEncryptDirect(Camellia* cam, byte* out,
+                                                                const byte* in);
+/*!
+    \ingroup Camellia
+    
+    \brief This function does a one-block decrypt using the provided camellia 
+    object. It parses the first 16 byte block from the buffer in, decrypts it, 
+    and stores the result in the buffer out. Before using this function, one 
+    should initialize the camellia object using wc_CamelliaSetKey.
+    
+    \return none No returns.
+    
+    \param cam pointer to the camellia structure to use for encryption
+    \param out pointer to the buffer in which to store the decrypted 
+    plaintext block
+    \param in pointer to the buffer containing the ciphertext block to decrypt
+    
+    _Example_
+    \code
+    Camellia cam;
+    // initialize cam structure with key and iv
+    byte cipher[] = { // initialize with encrypted message to decrypt };
+    byte decrypted[16];
+
+    wc_CamelliaDecryptDirect(&cam, decrypted, cipher);
+    \endcode
+    
+    \sa wc_CamelliaEncryptDirect
+*/
+WOLFSSL_API int  wc_CamelliaDecryptDirect(Camellia* cam, byte* out,
+                                                                const byte* in);
+/*!
+    \ingroup Camellia
+    
+    \brief This function encrypts the plaintext from the buffer in and 
+    stores the output in the buffer out. It performs this encryption 
+    using Camellia with Cipher Block Chaining (CBC).
+    
+    \return none No returns.
+    
+    \param cam pointer to the camellia structure to use for encryption
+    \param out pointer to the buffer in which to store the encrypted ciphertext
+    \param in pointer to the buffer containing the plaintext to encrypt
+    \param sz the size of the message to encrypt
+    
+    _Example_
+    \code
+    Camellia cam;
+    // initialize cam structure with key and iv
+    byte plain[] = { // initialize with encrypted message to decrypt };
+    byte cipher[sizeof(plain)];
+    
+    wc_CamelliaCbcEncrypt(&cam, cipher, plain, sizeof(plain));
+    \endcode
+    
+    \sa wc_CamelliaCbcDecrypt
+*/
+WOLFSSL_API int wc_CamelliaCbcEncrypt(Camellia* cam,
+                                          byte* out, const byte* in, word32 sz);
+/*!
+    \ingroup Camellia    
+    
+    \brief This function decrypts the ciphertext from the buffer in and 
+    stores the output in the buffer out. It performs this decryption using 
+    Camellia with Cipher Block Chaining (CBC).
+    
+    \return none No returns.
+    
+    \param cam pointer to the camellia structure to use for encryption
+    \param out pointer to the buffer in which to store the decrypted message
+    \param in pointer to the buffer containing the encrypted ciphertext
+    \param sz the size of the message to encrypt
+
+    _Example_
+    \code
+    Camellia cam;
+    // initialize cam structure with key and iv
+    byte cipher[] = { // initialize with encrypted message to decrypt };
+    byte decrypted[sizeof(cipher)];
+
+    wc_CamelliaCbcDecrypt(&cam, decrypted, cipher, sizeof(cipher));
+    \endcode
+    
+    \sa wc_CamelliaCbcEncrypt
+*/
+WOLFSSL_API int wc_CamelliaCbcDecrypt(Camellia* cam,
+                                          byte* out, const byte* in, word32 sz);

doc/dox_comments/header_files/chacha.h

@@ -0,0 +1,97 @@
+/*!
+    \ingroup ChaCha
+    
+    \brief This function sets the initialization vector (nonce) for a ChaCha 
+    object, initializing it for use as a cipher. It should be called after the 
+    key has been set, using wc_Chacha_SetKey. A difference nonce should be 
+    used for each round of encryption.
+    
+    \return 0 Returned upon successfully setting the initialization vector
+    \return BAD_FUNC_ARG returned if there is an error processing the ctx 
+    input argument
+    
+    \param ctx pointer to the ChaCha structure on which to set the iv
+    \param inIv pointer to a buffer containing the 12 byte initialization 
+    vector with which to initialize the ChaCha structure
+    \param counter the value at which the block counter should start--usually 
+    zero.
+
+    _Example_
+    \code
+    ChaCha enc;
+    // initialize enc with wc_Chacha_SetKey
+    byte iv[12];
+    // initialize iv 
+    if( wc_Chacha_SetIV(&enc, iv, 0) != 0) { 
+	    // error initializing ChaCha structure
+    }
+    \endcode
+    
+    \sa wc_Chacha_SetKey
+    \sa wc_Chacha_Process
+*/
+WOLFSSL_API int wc_Chacha_SetIV(ChaCha* ctx, const byte* inIv, word32 counter);
+/*!
+    \ingroup ChaCha
+    
+    \brief This function processes the text from the buffer input, encrypts 
+    or decrypts it, and stores the result in the buffer output.
+    
+    \return 0 Returned upon successfully encrypting or decrypting the input
+    \return BAD_FUNC_ARG returned if there is an error processing the ctx 
+    input argument
+    
+    \param ctx pointer to the ChaCha structure on which to set the iv
+    \param output pointer to a buffer in which to store the output ciphertext 
+    or decrypted plaintext
+    \param input pointer to the buffer containing the input plaintext to 
+    encrypt or the input ciphertext to decrypt
+    \param msglen length of the message to encrypt or the ciphertext to decrypt
+
+    _Example_
+    \code
+    ChaCha enc;
+    // initialize enc with wc_Chacha_SetKey and wc_Chacha_SetIV
+
+    byte plain[] = { // initialize plaintext };
+    byte cipher[sizeof(plain)];
+    if( wc_Chacha_Process(&enc, cipher, plain, sizeof(plain)) != 0) { 
+	    // error processing ChaCha cipher
+    }
+    \endcode
+    
+    \sa wc_Chacha_SetKey
+    \sa wc_Chacha_Process
+*/
+WOLFSSL_API int wc_Chacha_Process(ChaCha* ctx, byte* cipher, const byte* plain,
+                              word32 msglen);
+/*!
+    \ingroup ChaCha
+    
+    \brief This function sets the key for a ChaCha object, initializing it for 
+    use as a cipher. It should be called before setting the nonce with 
+    wc_Chacha_SetIV, and before using it for encryption with wc_Chacha_Process.
+    
+    \return 0 Returned upon successfully setting the key
+    \return BAD_FUNC_ARG returned if there is an error processing the ctx 
+    input argument or if the key is not 16 or 32 bytes long
+    
+    \param ctx pointer to the ChaCha structure in which to set the key
+    \param key pointer to a buffer containing the 16 or 32 byte key with 
+    which to initialize the ChaCha structure
+    \param keySz the length of the key passed in
+    
+    _Example_
+    \code
+    ChaCha enc;
+    byte key[] = { // initialize key };
+
+    if( wc_Chacha_SetKey(&enc, key, sizeof(key)) != 0) { 
+	    // error initializing ChaCha structure
+    }
+    \endcode
+    
+    \sa wc_Chacha_SetIV
+    \sa wc_Chacha_Process
+*/
+WOLFSSL_API int wc_Chacha_SetKey(ChaCha* ctx, const byte* key, word32 keySz);

doc/dox_comments/header_files/chacha20_poly1305.h

@@ -0,0 +1,119 @@
+/*!
+    \ingroup ChaCha20Poly1305
+    
+    \brief This function encrypts an input message, inPlaintext, using the 
+    ChaCha20 stream cipher, into the output buffer, outCiphertext. It 
+    also performs Poly-1305 authentication (on the cipher text), and 
+    stores the generated authentication tag in the output buffer, outAuthTag.
+    
+    \return 0 Returned upon successfully encrypting the message
+    \return BAD_FUNC_ARG returned if there is an error during the encryption 
+    process
+    
+    \param inKey pointer to a buffer containing the 32 byte key to use 
+    for encryption
+    \param inIv pointer to a buffer containing the 12 byte iv to use for 
+    encryption
+    \param inAAD pointer to the buffer containing arbitrary length additional 
+    authenticated data (AAD)
+    \param inAADLen length of the input AAD
+    \param inPlaintext pointer to the buffer containing the plaintext to 
+    encrypt
+    \param inPlaintextLen the length of the plain text to  encrypt
+    \param outCiphertext pointer to the buffer in which to store the ciphertext
+    \param outAuthTag pointer to a 16 byte wide buffer in which to store the 
+    authentication tag
+    
+    _Example_
+    \code
+    byte key[] = { // initialize 32 byte key };
+    byte iv[]  = { // initialize 12 byte key };
+    byte inAAD[] = { // initialize AAD };
+
+    byte plain[] = { // initialize message to encrypt };
+    byte cipher[sizeof(plain)];
+    byte authTag[16];
+
+    int ret = wc_ChaCha20Poly1305_Encrypt(key, iv, inAAD, sizeof(inAAD),
+    plain, sizeof(plain), cipher, authTag);
+
+    if(ret != 0) {
+    	// error running encrypt
+    }
+    \endcode
+    
+    \sa wc_ChaCha20Poly1305_Decrypt
+    \sa wc_ChaCha_*
+    \sa wc_Poly1305*
+*/
+WOLFSSL_API
+int wc_ChaCha20Poly1305_Encrypt(
+                const byte inKey[CHACHA20_POLY1305_AEAD_KEYSIZE],
+                const byte inIV[CHACHA20_POLY1305_AEAD_IV_SIZE],
+                const byte* inAAD, const word32 inAADLen,
+                const byte* inPlaintext, const word32 inPlaintextLen,
+                byte* outCiphertext,
+                byte outAuthTag[CHACHA20_POLY1305_AEAD_AUTHTAG_SIZE]);
+/*!
+    \ingroup ChaCha20Poly1305    
+    
+    \brief This function decrypts input ciphertext, inCiphertext, using the 
+    ChaCha20 stream cipher, into the output buffer, outPlaintext. It also 
+    performs Poly-1305 authentication, comparing the given inAuthTag to an 
+    authentication generated with the inAAD (arbitrary length additional 
+    authentication data). Note: If the generated authentication tag does 
+    not match the supplied authentication tag, the text is not decrypted.
+    
+    \return 0 Returned upon successfully decrypting the message
+    \return BAD_FUNC_ARG Returned if any of the function arguments do not 
+    match what is expected
+    \return MAC_CMP_FAILED_E Returned if the generated authentication tag 
+    does not match the supplied inAuthTag.
+    
+    \param inKey pointer to a buffer containing the 32 byte key to use for 
+    decryption
+    \param inIv pointer to a buffer containing the 12 byte iv to use for 
+    decryption
+    \param inAAD pointer to the buffer containing arbitrary length additional 
+    authenticated data (AAD)
+    \param inAADLen length of the input AAD
+    \param inCiphertext pointer to the buffer containing the ciphertext to 
+    decrypt
+    \param outCiphertextLen the length of the ciphertext to decrypt
+    \param inAuthTag pointer to the buffer containing the 16 byte digest 
+    for authentication
+    \param outPlaintext pointer to the buffer in which to store the plaintext
+
+    _Example_
+    \code
+    byte key[]   = { // initialize 32 byte key };
+    byte iv[]    = { // initialize 12 byte key };
+    byte inAAD[] = { // initialize AAD };
+
+    byte cipher[]    = { // initialize with received ciphertext };
+    byte authTag[16] = { // initialize with received authentication tag };
+
+    byte plain[sizeof(cipher)];
+
+    int ret = wc_ChaCha20Poly1305_Decrypt(key, iv, inAAD, sizeof(inAAD),
+    cipher, sizeof(cipher), plain, authTag);
+
+    if(ret == MAC_CMP_FAILED_E) {
+    	// error during authentication
+    } else if( ret != 0) {
+    	// error with function arguments
+    }
+    \endcode
+    
+    \sa wc_ChaCha20Poly1305_Encrypt
+    \sa wc_ChaCha_*
+    \sa wc_Poly1305*
+*/
+WOLFSSL_API
+int wc_ChaCha20Poly1305_Decrypt(
+                const byte inKey[CHACHA20_POLY1305_AEAD_KEYSIZE],
+                const byte inIV[CHACHA20_POLY1305_AEAD_IV_SIZE],
+                const byte* inAAD, const word32 inAADLen,
+                const byte* inCiphertext, const word32 inCiphertextLen,
+                const byte inAuthTag[CHACHA20_POLY1305_AEAD_AUTHTAG_SIZE],
+                byte* outPlaintext);

doc/dox_comments/header_files/coding.h

@@ -0,0 +1,228 @@
+/*!
+    \ingroup Base_Encoding
+    
+    \brief This function decodes the given Base64 encoded input, in, and 
+    stores the result in the output buffer out. It also sets the size 
+    written to the output buffer in the variable outLen.
+    
+    \return 0 Returned upon successfully decoding the Base64 encoded input
+    \return BAD_FUNC_ARG Returned if the output buffer is too small to 
+    store the decoded input
+    \return ASN_INPUT_E Returned if a character in the input buffer falls 
+    outside of the Base64 range ([A-Za-z0-9+/=]) or if there is an invalid 
+    line ending in the Base64 encoded input
+
+    \param in pointer to the input buffer to decode
+    \param inLen length of the input buffer to decode
+    \param out pointer to the output buffer in which to store the decoded 
+    message
+    \param outLen pointer to the length of the output buffer. Updated with 
+    the bytes written at the end of the function call
+
+    _Example_
+    \code
+    byte encoded[] = { // initialize text to decode };
+    byte decoded[sizeof(encoded)]; 
+    // requires at least (sizeof(encoded) * 3 + 3) / 4 room
+
+    int outLen = sizeof(decoded);
+
+    if( Base64_Decode(encoded,sizeof(encoded), decoded, &outLen) != 0 ) { 
+    	// error decoding input buffer
+    }
+    \endcode
+    
+    \sa Base64_Encode
+    \sa Base16_Decode
+*/
+WOLFSSL_API int Base64_Decode(const byte* in, word32 inLen, byte* out,
+                               word32* outLen);
+/*!
+    \ingroup Base_Encoding
+    
+    \brief This function encodes the given input, in, and stores the Base64 
+    encoded result in the output buffer out. It writes the data with the 
+    traditional ‘\n’ line endings, instead of escaped %0A line endings. Upon 
+    successfully completing, this function also sets outLen to the number 
+    of bytes written to the output buffer.
+    
+    \return 0 Returned upon successfully decoding the Base64 encoded input
+    \return BAD_FUNC_ARG Returned if the output buffer is too small to 
+    store the encoded input
+    \return BUFFER_E Returned if the output buffer runs out of room 
+    while encoding
+
+    \param in pointer to the input buffer to encode
+    \param inLen length of the input buffer to encode
+    \param out pointer to the output buffer in which to store the 
+    encoded message
+    \param outLen pointer to the length of the output buffer in 
+    which to store the encoded message
+
+    _Example_
+    \code
+    byte plain[] = { // initialize text to encode };
+    byte encoded[MAX_BUFFER_SIZE]; 
+
+    int outLen = sizeof(encoded);
+
+    if( Base64_Encode(plain, sizeof(plain), encoded, &outLen) != 0 ) { 
+    	// error encoding input buffer
+    }
+    \endcode
+    
+    \sa Base64_EncodeEsc
+    \sa Base64_Decode
+*/
+WOLFSSL_API
+int Base64_Encode(const byte* in, word32 inLen, byte* out,
+                                  word32* outLen);
+/*!
+    \ingroup Base_Encoding
+    
+    \brief This function encodes the given input, in, and stores the 
+    Base64 encoded result in the output buffer out. It writes the data 
+    with %0A escaped line endings instead of ‘\n’ line endings. 
+    Upon successfully completing, this function also sets outLen 
+    to the number of bytes written to the output buffer.
+    
+    \return 0 Returned upon successfully decoding the Base64 encoded input
+    \return BAD_FUNC_ARG Returned if the output buffer is too small 
+    to store the encoded input
+    \return BUFFER_E Returned if the output buffer runs out of 
+    room while encoding
+    \return ASN_INPUT_E Returned if there is an error processing 
+    the decode on the input message
+
+    \param in pointer to the input buffer to encode
+    \param inLen length of the input buffer to encode
+    \param out pointer to the output buffer in which to store 
+    the encoded message
+    \param outLen pointer to the length of the output buffer in 
+    which to store the encoded message
+
+    _Example_
+    \code
+    byte plain[] = { // initialize text to encode };
+    byte encoded[MAX_BUFFER_SIZE]; 
+
+    int outLen = sizeof(encoded);
+
+    if( Base64_EncodeEsc(plain, sizeof(plain), encoded, &outLen) != 0 ) { 
+    	// error encoding input buffer
+    }
+    \endcode
+    
+    \sa Base64_Encode
+    \sa Base64_Decode
+*/
+int Base64_EncodeEsc(const byte* in, word32 inLen, byte* out,
+                                  word32* outLen);
+/*!
+    \ingroup Base_Encoding
+    
+    \brief This function encodes the given input, in, and stores the 
+    Base64 encoded result in the output buffer out. It writes the data 
+    with no new lines. Upon successfully completing, this function 
+    also sets outLen to the number of bytes written to the output buffer
+    
+    \return 0 Returned upon successfully decoding the Base64 encoded input
+    \return BAD_FUNC_ARG Returned if the output buffer is too small 
+    to store the encoded input
+    \return BUFFER_E Returned if the output buffer runs out of room 
+    while encoding
+    \return ASN_INPUT_E Returned if there is an error processing the 
+    decode on the input message
+
+    \param in pointer to the input buffer to encode
+    \param inLen length of the input buffer to encode
+    \param out pointer to the output buffer in which to store the 
+    encoded message
+    \param outLen pointer to the length of the output buffer in which to 
+    store the encoded message
+
+    _Example_
+    \code
+    byte plain[] = { // initialize text to encode };
+    byte encoded[MAX_BUFFER_SIZE]; 
+    int outLen = sizeof(encoded);
+    if( Base64_Encode_NoNl(plain, sizeof(plain), encoded, &outLen) != 0 ) { 
+    	// error encoding input buffer
+    }
+    \endcode
+    
+    \sa Base64_Encode
+    \sa Base64_Decode
+*/
+WOLFSSL_API
+int Base64_Encode_NoNl(const byte* in, word32 inLen, byte* out,
+                                  word32* outLen);
+/*!
+    \ingroup Base_Encoding
+    
+    \brief This function decodes the given Base16 encoded input, in, and 
+    stores the result in the output buffer out. It also sets the size written 
+    to the output buffer in the variable outLen.
+    
+    \return 0 Returned upon successfully decoding the Base16 encoded input
+    \return BAD_FUNC_ARG Returned if the output buffer is too small to store 
+    the decoded input or if the input length is not a multiple of two
+    \return ASN_INPUT_E Returned if a character in the input buffer falls 
+    outside of the Base16 range ([0-9A-F])
+
+    \param in pointer to the input buffer to decode
+    \param inLen length of the input buffer to decode
+    \param out pointer to the output buffer in which to store the decoded 
+    message
+    \param outLen pointer to the length of the output buffer. Updated with the 
+    bytes written at the end of the function call
+
+    _Example_
+    \code
+    byte encoded[] = { // initialize text to decode };
+    byte decoded[sizeof(encoded)]; 
+    int outLen = sizeof(decoded);
+
+    if( Base16_Decode(encoded,sizeof(encoded), decoded, &outLen) != 0 ) { 
+    	// error decoding input buffer
+    }
+    \endcode
+    
+    \sa Base64_Encode
+    \sa Base64_Decode
+    \sa Base16_Encode
+*/
+WOLFSSL_API
+int Base16_Decode(const byte* in, word32 inLen, byte* out, word32* outLen);
+/*!
+    \ingroup Base_Encoding
+    
+    \brief Encode input to base16 output.
+    
+    \return 0 Success
+    \return BAD_FUNC_ARG Returns if in, out, or outLen is null or if outLen is 
+    less than 2 times inLen plus 1.
+    
+    \param in Pointer to input buffer to be encoded.
+    \param inLen Length of input buffer.
+    \param out Pointer to output buffer.
+    \param outLen Length of output buffer.  Is set to len of encoded output.
+
+    _Example_
+    \code
+    byte in[] = { // Contents of something to be encoded };
+    byte out[NECESSARY_OUTPUT_SIZE];
+    word32 outSz = sizeof(out);
+
+    if(Base16_Encode(in, sizeof(in), out, &outSz) != 0)
+    {
+        // Handle encode error 
+    }
+    \endcode
+    
+    \sa Base64_Encode
+    \sa Base64_Decode
+    \sa Base16_Decode
+*/
+WOLFSSL_API
+int Base16_Encode(const byte* in, word32 inLen, byte* out, word32* outLen);

doc/dox_comments/header_files/compress.h

@@ -0,0 +1,71 @@
+/*!
+    \ingroup Compression
+    
+    \brief This function compresses the given input data using Huffman coding 
+    and stores the output in out. Note that the output buffer should still be 
+    larger than the input buffer because there exists a certain input for 
+    which there will be no compression possible, which will still require a 
+    lookup table. It is recommended that one allocate srcSz + 0.1% + 12 for 
+    the output buffer.
+    
+    \return On successfully compressing the input data, returns the number 
+    of bytes stored in the output buffer
+    \return COMPRESS_INIT_E Returned if there is an error initializing the 
+    stream for compression
+    \return COMPRESS_E Returned if an error occurs during compression
+
+    \param out pointer to the output buffer in which to store the compressed 
+    data
+    \param outSz size available in the output buffer for storage 
+    \param in pointer to the buffer containing the message to compress
+    \param inSz size of the input message to compress
+    \param flags flags to control how compression operates. Use 0 for normal 
+    decompression
+    
+    _Example_
+    \code
+    byte message[] = { // initialize text to compress };
+    byte compressed[(sizeof(message) + sizeof(message) * .001 + 12 )]; 
+    // Recommends at least srcSz + .1% + 12
+
+    if( wc_Compress(compressed, sizeof(compressed), message, sizeof(message), 
+    0) != 0){ 
+    	// error compressing data
+    }
+    \endcode
+    
+    \sa wc_DeCompress
+*/
+WOLFSSL_API int wc_Compress(byte*, word32, const byte*, word32, word32);
+/*!
+    \ingroup Compression
+    
+    \brief This function decompresses the given compressed data using Huffman 
+    coding and stores the output in out.
+    
+    \return Succes On successfully decompressing the input data, returns the 
+    number of bytes stored in the output buffer
+    \return COMPRESS_INIT_E: Returned if there is an error initializing the 
+    stream for compression
+    \return COMPRESS_E: Returned if an error occurs during compression
+
+    \param out pointer to the output buffer in which to store the decompressed 
+    data
+    \param outSz size available in the output buffer for storage 
+    \param in pointer to the buffer containing the message to decompress
+    \param inSz size of the input message to decompress
+    
+    _Example_
+    \code
+    byte compressed[] = { // initialize compressed message };
+    byte decompressed[MAX_MESSAGE_SIZE]; 
+
+    if( wc_DeCompress(decompressed, sizeof(decompressed), 
+    compressed, sizeof(compressed)) != 0 ) { 
+    	// error decompressing data
+    }
+    \endcode
+    
+    \sa wc_Compress
+*/
+WOLFSSL_API int wc_DeCompress(byte*, word32, const byte*, word32);

doc/dox_comments/header_files/curve25519.h

@@ -0,0 +1,678 @@
+/*!
+    \ingroup Curve25519
+    
+    \brief This function generates a curve25519 key using the given random 
+    number generator, rng, of the size given (keysize), and stores it in 
+    the given curve25519_key structure. It should be called after the key 
+    structure has been initialized through wc_curve25519_init.
+    
+    \return 0 Returned on successfully generating the key and and storing 
+    it in the given curve25519_key structure
+    \return ECC_BAD_ARG_E Returned if rng or key evaluate to NULL, or 
+    the input keysize does not correspond to the keysize for a 
+    curve25519 key ( 32 bytes)
+    \return RNG_FAILURE_E Returned if the rng internal status is not 
+    DRBG_OK or if there is in generating the next random block with rng
+    
+    \param rng pointer to the RNG object used to generate the ecc key
+    \param keysize size of the key to generate. Must be 32 bytes for curve25519
+    \param key pointer to the curve25519_key structure in which to 
+    store the generated key
+    
+    _Example_
+    \code
+    curve25519_key key;
+    wc_curve25519_init(&key); // initialize key
+    WC_RNG rng;
+    wc_InitRng(&rng); // initialize random number generator
+
+    if( wc_curve25519_make_key(&rng, 32, &key) != 0) { 
+    	// making 25519 key
+    }
+    \endcode
+    
+    \sa wc_curve25519_init
+*/
+WOLFSSL_API
+int wc_curve25519_make_key(WC_RNG* rng, int keysize, curve25519_key* key);
+/*!
+    \ingroup Curve25519
+    
+    \brief This function computes a shared secret key given a secret private 
+    key and a received public key. It stores the generated secret key in the 
+    buffer out and assigns the variable of the secret key to outlen. Only 
+    supports big endian.
+    
+    \return 0 Returned on successfully computing a shared secret key
+    \return BAD_FUNC_ARG Returned if any of the input parameters passed in 
+    are NULL
+    \return ECC_BAD_ARG_E Returned if the first bit of the public key is 
+    set, to avoid implementation fingerprinting
+    
+    \param private_key pointer to the curve25519_key structure initialized 
+    with the user’s private key
+    \param public_key pointer to the  curve25519_key structure containing 
+    the received public key
+    \param out pointer to a buffer in which to store the 32 byte computed 
+    secret key
+    \param outlen pointer in which to store the length written to the 
+    output buffer
+
+    _Example_
+    \code
+    byte sharedKey[32];
+    word32 keySz;
+    curve25519_key privKey, pubKey;
+    // initialize both keys
+
+    if ( wc_curve25519_shared_secret(&privKey, &pubKey, sharedKey, 
+    &keySz) != 0 ) {
+    	// error generating shared key
+    }
+    \endcode
+    
+    \sa wc_curve25519_init
+    \sa wc_curve25519_make_key
+    \sa wc_curve25519_shared_secret_ex
+*/
+WOLFSSL_API
+int wc_curve25519_shared_secret(curve25519_key* private_key,
+                                curve25519_key* public_key,
+                                byte* out, word32* outlen);
+/*!
+    \ingroup Curve25519
+    
+    \brief This function computes a shared secret key given a secret private 
+    key and a received public key. It stores the generated secret key in the 
+    buffer out and assigns the variable of the secret key to outlen. Supports 
+    both big and little endian.
+    
+    \return 0 Returned on successfully computing a shared secret key
+    \return BAD_FUNC_ARG Returned if any of the input parameters passed in 
+    are NULL
+    \return ECC_BAD_ARG_E Returned if the first bit of the public key is set, 
+    to avoid implementation fingerprinting
+    
+    \param private_key pointer to the curve25519_key structure initialized 
+    with the user’s private key
+    \param public_key pointer to the  curve25519_key structure containing 
+    the received public key
+    \param out pointer to a buffer in which to store the 32 byte computed 
+    secret key
+    \param outlen pointer in which to store the length written to the output 
+    buffer
+    \param endian EC25519_BIG_ENDIAN or EC25519_LITTLE_ENDIAN to set which 
+    form to use.
+
+    _Example_
+    \code
+    byte sharedKey[32];
+    word32 keySz;
+
+    curve25519_key privKey, pubKey;
+    // initialize both keys
+
+    if ( wc_curve25519_shared_secret_ex(&privKey, &pubKey, sharedKey, &keySz, 
+    EC25519_BIG_ENDIAN) != 0 ) {
+	    // error generating shared key
+    }
+    \endcode
+    
+    \sa wc_curve25519_init
+    \sa wc_curve25519_make_key
+    \sa wc_curve25519_shared_secret
+*/
+WOLFSSL_API
+int wc_curve25519_shared_secret_ex(curve25519_key* private_key,
+                                   curve25519_key* public_key,
+                                   byte* out, word32* outlen, int endian);
+/*!
+    \ingroup Curve25519
+    
+    \brief This function initializes a curve25519 key. It should be called 
+    before generating a key for the structure with wc_curve25519_init and 
+    before using the key to encrypt data.
+    
+    \return 0 Returned on successfully initializing the curve25519_key 
+    structure
+
+    \param key pointer to the curve25519_key structure to initialize
+
+    _Example_
+    \code
+    curve25519_key key;
+    wc_curve25519_init(&key); // initialize key
+    // make key and proceed to encryption
+    \endcode
+    
+    \sa wc_curve25519_make_key
+*/
+WOLFSSL_API
+int wc_curve25519_init(curve25519_key* key);
+/*!
+    \ingroup Curve25519
+    
+    \brief This function frees a curve 25519 object.
+    
+    \return none No returns.
+    
+    \param key pointer to the key object to free
+    
+    _Example_
+    \code
+    curve25519_key privKey;
+    // initialize key, use it to generate shared secret key
+    wc_curve25519_free(&privKey);
+    \endcode
+
+    \sa wc_curve25519_init
+    \sa wc_curve25519_make_key
+*/
+WOLFSSL_API
+void wc_curve25519_free(curve25519_key* key);
+/*!
+    \ingroup Curve25519
+    
+    \brief This function imports a curve25519 private key only. (Big endian).
+    
+    \return 0 Success
+    \return BAD_FUNC_ARG Returns if key or priv is null.
+    \return ECC_BAD_ARG_E Returns if privSz is not equal to 
+    wc_curve25519_size(key).
+    
+    \param priv Private key buffer
+    \param privSz Size of private key buffer.
+    \param key The curve25519_key structure to store the private key.
+
+    _Example_
+    \code
+    byte priv[] = { Contents of private key };
+    curve25519_key key;
+    wc_curve25519_init(&key);
+
+    if(wc_curve25519_import_private(priv, sizeof(priv), &key) != 0)
+    {
+        // Some error was thrown
+    }
+    \endcode
+    
+    \sa wc_curve25519_import_private_ex
+    \sa wc_curve25519_size
+*/
+WOLFSSL_API
+int wc_curve25519_import_private(const byte* priv, word32 privSz,
+                                 curve25519_key* key);
+/*!
+    \ingroup Curve25519
+    
+    \brief curve25519 private key import only. (Big or Little endian).
+    
+    \return 0 Success
+    \return  Returns if key or priv is null.
+    \return ECC_BAD_ARG_E Returns if privSz is not equal to 
+    wc_curve25519_size(key).
+
+    \param priv Buffer for private key.
+    \param privSz Size of private key buffer.
+    \param key The curve25519_key structure to store the private key.
+    \param endian EC25519_BIG_ENDIAN or EC25519_LITTLE_ENDIAN to 
+    set which form to use.
+
+    _Example_
+    \code
+    byte priv[] = { // Contents of private key };
+    curve25519_key key;
+    wc_curve25519_init(&key);
+
+    if(wc_curve25519_import_private_ex(priv, sizeof(priv), &key, 
+    EC25519_BIG_ENDIAN) != 0)
+    {
+       // Some error was thrown
+    }
+
+    \endcode
+    
+    \sa wc_curve25519_import_private
+    \sa wc_curbe25519_size
+*/
+WOLFSSL_API
+int wc_curve25519_import_private_ex(const byte* priv, word32 privSz,
+                                    curve25519_key* key, int endian);
+/*!
+    \ingroup Curve25519
+    
+    \brief This function imports a public-private key pair into a 
+    curve25519_key structure.  Big endian only.
+
+    \return 0 Returned on importing into the curve25519_key structure
+    \return ECC_BAD_ARG_E Returned if any of the input parameters 
+    are NULL, or the input key’s key size does not match the public 
+    or private key sizes
+    
+    \param priv pointer to a buffer containing the private key to import
+    \param privSz length of the private key to import
+    \param pub pointer to a buffer containing the public key to import
+    \param pubSz length of the public key to import
+    \param key pointer to the structure in which to store the imported keys
+
+    _Example_
+    \code
+    int ret;
+
+    byte priv[32];
+    byte pub[32];
+    // initialize with public and private keys
+    curve25519_key key;
+
+    wc_curve25519_init(&key);
+    // initialize key 
+
+    ret = wc_curve25519_import_private_raw(&priv, sizeof(priv), pub, 
+    sizeof(pub),&key);
+    if (ret != 0) {
+    	// error importing keys
+    }
+    \endcode
+    
+    \sa wc_curve25519_init
+    \sa wc_curve25519_make_key
+    \sa wc_curve25519_import_public
+    \sa wc_curve25519_export_private_raw 
+*/
+WOLFSSL_API
+int wc_curve25519_import_private_raw(const byte* priv, word32 privSz,
+                            const byte* pub, word32 pubSz, curve25519_key* key);
+/*!
+    \ingroup Curve25519
+    
+    \brief This function imports a public-private key pair into a curve25519_key structure.  Supports both big and little endian.
+    
+    \return 0 Returned on importing into the curve25519_key structure
+    \return ECC_BAD_ARG_E Returned if any of the input parameters are NULL, 
+    or the input key’s key size does not match the public or private key sizes
+    
+    \param priv pointer to a buffer containing the private key to import
+    \param privSz length of the private key to import
+    \param pub pointer to a buffer containing the public key to import
+    \param pubSz length of the public key to import
+    \param key pointer to the structure in which to store the imported keys
+    \param endian EC25519_BIG_ENDIAN or EC25519_LITTLE_ENDIAN to set 
+    which form to use.
+
+    _Example_
+    \code
+    int ret;
+    byte priv[32];
+    byte pub[32];
+    // initialize with public and private keys
+    curve25519_key key;
+
+    wc_curve25519_init(&key);
+    // initialize key 
+
+    ret = wc_curve25519_import_private_raw_ex(&priv, sizeof(priv), pub, 
+    sizeof(pub),&key, EC25519_BIG_ENDIAN);
+    if (ret != 0) {
+    	// error importing keys
+    }
+    \endcode
+
+    \sa wc_curve25519_init
+    \sa wc_curve25519_make_key
+    \sa wc_curve25519_import_public
+    \sa wc_curve25519_export_private_rawm
+    \sa wc_curve25519_import_private_raw
+*/
+WOLFSSL_API
+int wc_curve25519_import_private_raw_ex(const byte* priv, word32 privSz,
+                                        const byte* pub, word32 pubSz,
+                                        curve25519_key* key, int endian);
+/*!
+    \ingroup Curve25519
+    
+    \brief This function exports a private key from a curve25519_key structure 
+    and stores it in the given out buffer. It also sets outLen to be the size 
+    of the exported key. Big Endian only.
+    
+    \return 0 Returned on successfully exporting the private key from the 
+    curve25519_key structure
+    \return BAD_FUNC_ARG Returned if any input parameters are NULL.
+    \return ECC_BAD_ARG_E Returned if wc_curve25519_size() is not equal to key.
+    
+    \param key pointer to the structure from which to export the key
+    \param out pointer to the buffer in which to store the exported key
+    \param outLen will store the bytes written to the output buffer
+
+    _Example_
+    \code
+    int ret;
+    byte priv[32];
+    int privSz;
+
+    curve25519_key key;
+    // initialize and make key
+
+    ret = wc_curve25519_export_private_raw(&key, priv, &privSz);
+    if (ret != 0) {
+    	// error exporting key
+    }
+    \endcode
+
+    \sa wc_curve25519_init
+    \sa wc_curve25519_make_key
+    \sa wc_curve25519_import_private_raw
+    \sa wc_curve25519_export_private_raw_ex
+*/
+WOLFSSL_API
+int wc_curve25519_export_private_raw(curve25519_key* key, byte* out,
+                                     word32* outLen);
+/*!
+    \ingroup Curve25519
+    
+    \brief This function exports a private key from a curve25519_key structure 
+    and stores it in the given out buffer. It also sets outLen to be the size 
+    of the exported key.  Can specify whether it's big or little endian.
+    
+    \return 0 Returned on successfully exporting the private key from the 
+    curve25519_key structure
+    \return BAD_FUNC_ARG Returned if any input parameters are NULL.
+    \return ECC_BAD_ARG_E Returned if wc_curve25519_size() is not equal to key.
+
+    \param key pointer to the structure from which to export the key
+    \param out pointer to the buffer in which to store the exported key
+    \param outLen will store the bytes written to the output buffer
+    \param endian EC25519_BIG_ENDIAN or EC25519_LITTLE_ENDIAN to set which 
+    form to use.
+
+    _Example_
+    \code
+    int ret;
+
+    byte priv[32];
+    int privSz;
+    curve25519_key key;
+    // initialize and make key
+    ret = wc_curve25519_export_private_raw_ex(&key, priv, &privSz, 
+    EC25519_BIG_ENDIAN);
+    if (ret != 0) {
+	    // error exporting key
+    }
+    \endcode
+
+    \sa wc_curve25519_init
+    \sa wc_curve25519_make_key
+    \sa wc_curve25519_import_private_raw
+    \sa wc_curve25519_export_private_raw
+    \sa wc_curve25519_size
+*/
+WOLFSSL_API
+int wc_curve25519_export_private_raw_ex(curve25519_key* key, byte* out,
+                                        word32* outLen, int endian);
+/*!
+    \ingroup Curve25519
+    
+    \brief This function imports a public key from the given in buffer and 
+    stores it in the  curve25519_key structure.
+    
+    \return 0 Returned on successfully importing the public key into the 
+    curve25519_key structure
+    \return ECC_BAD_ARG_E Returned if any of the input parameters are NULL, 
+    or if the inLen 
+parameter does not match the key size of the key structure.
+    \return BAD_FUNC_ARG Returned if any of the input parameters are NULL.
+
+    \param in pointer to the buffer containing the public key to import
+    \param inLen length of the public key to import
+    \param key pointer to the curve25519_key structure in which to store 
+    the key
+
+    _Example_
+    \code
+    int ret;
+
+    byte pub[32];
+    // initialize pub with public key
+
+    curve25519_key key;
+    // initialize key
+
+    ret = wc_curve25519_import_public(pub,sizeof(pub), &key);
+    if (ret != 0) {
+	    // error exporting key
+    }
+    \endcode
+    
+    \sa wc_curve25519_init
+    \sa wc_curve25519_export_public
+    \sa wc_curve25519_import_private_raw
+    \sa wc_curve25519_public_ex
+*/
+WOLFSSL_API
+int wc_curve25519_import_public(const byte* in, word32 inLen,
+                                curve25519_key* key);
+/*!
+    \ingroup Curve25519
+    
+    \brief This function imports a public key from the given in buffer and 
+    stores it in the  curve25519_key structure.
+    
+    \brief 0 Returned on successfully importing the public key into the 
+    curve25519_key structure
+    \brief ECC_BAD_ARG_E Returned if the inLen parameter does not match the 
+    key size of the key structure
+    \brief BAD_FUNC_ARG Returned if any of the input parameters are NULL.
+
+    \param in pointer to the buffer containing the public key to import
+    \param inLen length of the public key to import
+    \param key pointer to the curve25519_key structure in which to store 
+    the key
+    \param endian EC25519_BIG_ENDIAN or EC25519_LITTLE_ENDIAN to set which 
+    form to use.
+    
+    _Example_
+    \code
+    int ret;
+    byte pub[32];
+    // initialize pub with public key
+    curve25519_key key;
+    // initialize key
+
+    ret = wc_curve25519_import_public_ex(pub,sizeof(pub), &key, 
+    EC25519_BIG_ENDIAN);
+    if (ret != 0) {
+    	// error exporting key
+    }
+    \endcode
+
+    \sa wc_curve25519_init
+    \sa wc_curve25519_export_public
+    \sa wc_curve25519_import_private_raw
+    \sa wc_curve25519_import_public
+    \sa wc_25519_size
+*/
+WOLFSSL_API
+int wc_curve25519_import_public_ex(const byte* in, word32 inLen,
+                                   curve25519_key* key, int endian);
+/*!
+    \ingroup Curve25519
+    
+    \brief This function exports a public key from the given key structure and 
+    stores the result in the out buffer. Big endian only.
+    
+    \return 0 Returned on successfully exporting the public key from the 
+    curve25519_key structure
+    \return ECC_BAD_ARG_E Returned if any of the input parameters are NULL
+    
+    \param key pointer to the curve25519_key structure in from which to 
+    export the key
+    \param out pointer to the buffer in which to store the public key
+    \param outLen will store the bytes written to the output buffer
+    
+    _Example_
+    \code
+    int ret;
+    byte pub[32];
+    int pubSz;
+    curve25519_key key;
+    // initialize and make key
+    ret = wc_curve25519_export_public(&key,pub, &pubSz);
+    if (ret != 0) {
+    	// error exporting key
+    }
+    \endcode
+    
+    \sa wc_curve25519_init
+    \sa wc_curve25519_export_private_raw
+    \sa wc_curve25519_import_public
+*/
+WOLFSSL_API
+int wc_curve25519_export_public(curve25519_key* key, byte* out, word32* outLen);
+/*!
+    \ingroup Curve25519
+    
+    \brief This function exports a public key from the given key structure and 
+    stores the result in the out buffer. Supports both big and little endian.
+    
+    \return 0 Returned on successfully exporting the public key from the 
+    curve25519_key structure
+    \return ECC_BAD_ARG_E Returned if any of the input parameters are NULL
+
+    \param key pointer to the curve25519_key structure in from which to 
+    export the key
+    \param out pointer to the buffer in which to store the public key
+    \param outLen will store the bytes written to the output buffer
+    \param endian EC25519_BIG_ENDIAN or EC25519_LITTLE_ENDIAN to set which 
+    form to use.
+    
+    _Example_
+    \code
+    int ret;
+
+    byte pub[32];
+    int pubSz;
+    curve25519_key key;
+    // initialize and make key
+
+    ret = wc_curve25519_export_public_ex(&key,pub, &pubSz, EC25519_BIG_ENDIAN);
+    if (ret != 0) {
+	    // error exporting key
+    }
+    \endcode
+    
+    \sa wc_curve25519_init
+    \sa wc_curve25519_export_private_raw
+    \sa wc_curve25519_import_public
+*/
+WOLFSSL_API
+int wc_curve25519_export_public_ex(curve25519_key* key, byte* out,
+                                   word32* outLen, int endian);
+/*!
+    \ingroup Curve25519
+    
+    \brief Export curve25519 key pair.  Big endian only.
+    
+    \return 0 Success
+    \return BAD_FUNC_ARG Returned if any input parameters are NULL.
+    \return ECC_BAD_ARG_E Returned if wc_curve25519_size() is not equal to key.
+    
+    \param key Description
+    \param priv Private key buffer.
+    \param privSz Size of private key buffer.
+    \param pub Public key buffer.
+    \param pubSz Size of public key buffer.
+    
+    _Example_
+    \code
+    int ret;
+    byte pub[32];
+    byte priv[32];
+    int pubSz;
+    int privSz;
+
+    curve25519_key key;
+    // initialize and make key
+
+    ret = wc_curve25519_export_key_raw(&key, priv, &privSz, pub, &pubSz);
+    if (ret != 0) {
+    	// error exporting key
+    }
+    \endcode
+    
+    \sa wc_curve25519_export_key_raw_ex
+    \sa wc_curve25519_export_private_raw
+    \sa wc_curve25519_export_public_raw
+*/
+WOLFSSL_API
+int wc_curve25519_export_key_raw(curve25519_key* key,
+                                 byte* priv, word32 *privSz,
+                                 byte* pub, word32 *pubSz);
+/*!
+    \ingroup Curve25519
+    
+    \brief Export curve25519 key pair.  Big or little endian.
+    
+    \return 0 Success
+    \return BAD_FUNC_ARG Returned if any input parameters are NULL.
+    \return ECC_BAD_ARG_E Returned if wc_curve25519_size() is not equal to key.
+    
+    \param key Description
+    \param priv Private key buffer.
+    \param privSz Size of private key buffer.
+    \param pub Public key buffer.
+    \param pubSz Size of public key buffer.
+    \param endian EC25519_BIG_ENDIAN or EC25519_LITTLE_ENDIAN to set which 
+    form to use.
+
+    _Example_
+    \code
+    int ret;
+
+    byte pub[32];
+    byte priv[32];
+    int pubSz;
+    int privSz;
+
+    curve25519_key key;
+    // initialize and make key
+
+    ret = wc_curve25519_export_key_raw_ex(&key,priv, &privSz, pub, &pubSz, 
+    EC25519_BIG_ENDIAN);
+    if (ret != 0) {
+    	// error exporting key
+    }
+    \endcode
+    
+    \sa wc_curve25519_export_key_raw
+    \sa wc_curve25519_export_private_raw_ex
+    \sa wc_curve25519_export_public_ex
+*/
+WOLFSSL_API
+int wc_curve25519_export_key_raw_ex(curve25519_key* key,
+                                    byte* priv, word32 *privSz,
+                                    byte* pub, word32 *pubSz,
+                                    int endian);
+/*!
+    \ingroup Curve25519
+    
+    \brief This function returns the key size of the given key structure.
+    
+    \return Success Given a valid, initialized curve25519_key structure, 
+    returns the size of the key. 
+    \return 0 Returned if key is NULL
+    
+    \param key pointer to the curve25519_key structure in for which to 
+    determine the key size
+    
+    _Example_
+    \code
+    curve25519_key key;
+    // initialize and make key
+    int keySz;
+    keySz = wc_curve25519_size(&key);
+    \endcode
+    
+    \sa wc_curve25519_init
+    \sa wc_curve25519_make_key
+*/
+WOLFSSL_API
+int wc_curve25519_size(curve25519_key* key);

doc/dox_comments/header_files/des3.h

@@ -0,0 +1,323 @@
+/*!
+    \ingroup 3DES
+    
+    \brief This function sets the key and initialization vector (iv) for the 
+    Des structure given as argument. It also initializes and allocates space 
+    for the buffers needed for encryption and decryption, if these have not 
+    yet been initialized. Note: If no iv is provided (i.e. iv == NULL) 
+    the initialization vector defaults to an iv of 0.
+    
+    \return 0 On successfully setting the key and initialization vector for 
+    the Des structure
+    
+    \param des pointer to the Des structure to initialize
+    \param key pointer to the buffer containing the 8 byte key with which to 
+    initialize the Des structure
+    \param iv pointer to the buffer containing the 8 byte iv with which to 
+    initialize the Des structure. If this is not provided, the iv defaults to 0
+    \param dir direction of encryption. Valid options are: DES_ENCRYPTION, 
+    and DES_DECRYPTION
+    
+    _Example_
+    \code
+    Des enc; // Des structure used for encryption
+    int ret;
+    byte key[] = { // initialize with 8 byte key };
+    byte iv[]  = { // initialize with 8 byte iv };
+
+    ret = wc_Des_SetKey(&des, key, iv, DES_ENCRYPTION);
+    if (ret != 0) {
+    	// error initializing des structure
+    }
+    \endcode
+    
+    \sa wc_Des_SetIV
+    \sa wc_Des3_SetKey
+*/
+WOLFSSL_API int  wc_Des_SetKey(Des* des, const byte* key,
+                               const byte* iv, int dir);
+/*!
+    \ingroup 3DES
+    
+    \brief This function sets the initialization vector (iv) for the Des 
+    structure given as argument. When passed a NULL iv, it sets the 
+    initialization vector to 0.
+    
+    \return none No returns.
+    
+    \param des pointer to the Des structure for which to set the iv
+    \param iv pointer to the buffer containing the 8 byte iv with which to 
+    initialize the Des structure. If this is not provided, the iv defaults to 0
+
+    _Example_
+    \code
+    Des enc; // Des structure used for encryption
+    // initialize enc with wc_Des_SetKey
+    byte iv[]  = { // initialize with 8 byte iv };
+    wc_Des_SetIV(&enc, iv);
+    }
+    \endcode
+    
+    \sa wc_Des_SetKey
+*/
+WOLFSSL_API void wc_Des_SetIV(Des* des, const byte* iv);
+/*!
+    \ingroup 3DES
+    
+    \brief This function encrypts the input message, in, and stores the result 
+    in the output buffer, out. It uses DES encryption with cipher block 
+    chaining (CBC) mode.
+    
+    \return 0 Returned upon successfully encrypting the given input message
+    
+    \param des pointer to the Des structure to use for encryption
+    \param out pointer to the buffer in which to store the encrypted ciphertext
+    \param in pointer to the input buffer containing the message to encrypt
+    \param sz length of the message to encrypt
+
+    _Example_
+    \code
+    Des enc; // Des structure used for encryption
+    // initialize enc with wc_Des_SetKey, use mode DES_ENCRYPTION
+
+    byte plain[]  = { // initialize with message };
+    byte cipher[sizeof(plain)];
+
+    if ( wc_Des_CbcEncrypt(&enc, cipher, plain, sizeof(plain)) != 0) { 
+	    // error encrypting message
+    }
+    \endcode
+    
+    \sa wc_Des_SetKey
+    \sa wc_Des_CbcDecrypt
+*/
+WOLFSSL_API int  wc_Des_CbcEncrypt(Des* des, byte* out,
+                                   const byte* in, word32 sz);
+/*!
+    \ingroup 3DES
+    
+    \brief This function decrypts the input ciphertext, in, and stores the 
+    resulting plaintext in the output buffer, out. It uses DES encryption 
+    with cipher block chaining (CBC) mode.
+    
+    \return 0 Returned upon successfully decrypting the given ciphertext
+    
+    \param des pointer to the Des structure to use for decryption
+    \param out pointer to the buffer in which to store the decrypted plaintext
+    \param in pointer to the input buffer containing the encrypted ciphertext
+    \param sz length of the ciphertext to decrypt
+    
+    _Example_
+    \code
+    Des dec; // Des structure used for decryption
+    // initialize dec with wc_Des_SetKey, use mode DES_DECRYPTION
+
+    byte cipher[]  = { // initialize with ciphertext };
+    byte decoded[sizeof(cipher)];
+
+    if ( wc_Des_CbcDecrypt(&dec, decoded, cipher, sizeof(cipher)) != 0) { 
+    	// error decrypting message
+    }
+    \endcode
+    
+    \sa wc_Des_SetKey
+    \sa wc_Des_CbcEncrypt
+*/
+WOLFSSL_API int  wc_Des_CbcDecrypt(Des* des, byte* out,
+                                   const byte* in, word32 sz);
+/*!
+    \ingroup 3DES
+    
+    \brief This function encrypts the input message, in, and stores the result 
+    in the output buffer, out. It uses Des encryption with Electronic 
+    Codebook (ECB) mode.
+    
+    \return 0: Returned upon successfully encrypting the given plaintext.
+    
+    \param des pointer to the Des structure to use for encryption
+    \param out pointer to the buffer in which to store the encrypted message
+    \param in pointer to the input buffer containing the plaintext to encrypt
+    \param sz length of the plaintext to encrypt
+
+    _Example_
+    \code
+    Des enc; // Des structure used for encryption
+    // initialize enc with wc_Des_SetKey, use mode DES_ENCRYPTION
+
+    byte plain[]  = { // initialize with message to encrypt };
+    byte cipher[sizeof(plain)];
+
+    if ( wc_Des_EcbEncrypt(&enc,cipher, plain, sizeof(plain)) != 0) { 
+    	// error encrypting message
+    }
+    \endcode
+    
+    \sa wc_Des_SetKe
+*/
+WOLFSSL_API int  wc_Des_EcbEncrypt(Des* des, byte* out,
+                                   const byte* in, word32 sz);
+/*!
+    \ingroup 3DES
+    
+    \brief This function encrypts the input message, in, and stores the 
+    result in the output buffer, out. It uses Des3 encryption with 
+    Electronic Codebook (ECB) mode. Warning: In nearly all use cases ECB 
+    mode is considered to be less secure. Please avoid using ECB API’s 
+    directly whenever possible.
+    
+    \return 0 Returned upon successfully encrypting the given plaintext
+    
+    \param des3 pointer to the Des3 structure to use for encryption
+    \param out pointer to the buffer in which to store the encrypted message
+    \param in pointer to the input buffer containing the plaintext to encrypt
+    \param sz length of the plaintext to encrypt
+
+    _Example_
+    /code
+    Des3 enc; // Des3 structure used for encryption
+    // initialize enc with wc_Des3_SetKey, use mode DES_ENCRYPTION
+
+    byte plain[]  = { // initialize with message to encrypt };
+    byte cipher[sizeof(plain)];
+
+    if ( wc_Des3_EcbEncrypt(&enc,cipher, plain, sizeof(plain)) != 0) { 
+        // error encrypting message
+    }
+    /endcode
+    
+    \sa wc_Des3_SetKey
+*/
+WOLFSSL_API int wc_Des3_EcbEncrypt(Des3* des, byte* out,
+                                   const byte* in, word32 sz);
+/*!
+    \ingroup 3DES
+    
+    \brief This function sets the key and initialization vector (iv) for 
+    the Des3 structure given as argument. It also initializes and allocates 
+    space for the buffers needed for encryption and decryption, if these 
+    have not yet been initialized. Note: If no iv is provided (i.e. iv == 
+    NULL) the initialization vector defaults to an iv of 0.
+    
+    \return 0 On successfully setting the key and initialization vector 
+    for the Des structure
+    
+    \param des3 pointer to the Des3 structure to initialize
+    \param key pointer to the buffer containing the 24 byte key with which 
+    to initialize the Des3 structure
+    \param iv pointer to the buffer containing the 8 byte iv with which to 
+    initialize the Des3 structure. If this is not provided, the iv defaults 
+    to 0
+    \param dir direction of encryption. Valid options are: DES_ENCRYPTION, 
+    and DES_DECRYPTION
+    
+    _Example_
+    \code
+    Des3 enc; // Des3 structure used for encryption
+    int ret;
+    byte key[] = { // initialize with 24 byte key };
+    byte iv[]  = { // initialize with 8 byte iv };
+
+    ret = wc_Des3_SetKey(&des, key, iv, DES_ENCRYPTION);
+    if (ret != 0) {
+    	// error initializing des structure
+    }
+    \endcode
+    
+    \sa wc_Des3_SetIV
+    \sa wc_Des3_CbcEncrypt
+    \sa wc_Des3_CbcDecrypt
+*/
+WOLFSSL_API int  wc_Des3_SetKey(Des3* des, const byte* key,
+                                const byte* iv,int dir);
+/*!
+    \ingroup 3DES
+    
+    \brief This function sets the initialization vector (iv) for the Des3 
+    structure given as argument. When passed a NULL iv, it sets the 
+    initialization vector to 0.
+    
+    \return none No returns.
+    
+    \param des pointer to the Des3 structure for which to set the iv
+    \param iv pointer to the buffer containing the 8 byte iv with which to 
+    initialize the Des3 structure. If this is not provided, the iv 
+    defaults to 0
+
+    _Example_
+    \code
+    Des3 enc; // Des3 structure used for encryption
+    // initialize enc with wc_Des3_SetKey
+
+    byte iv[]  = { // initialize with 8 byte iv };
+
+    wc_Des3_SetIV(&enc, iv);
+    }
+    \endcode
+    
+    \sa wc_Des3_SetKey
+*/
+WOLFSSL_API int  wc_Des3_SetIV(Des3* des, const byte* iv);
+/*!
+    \ingroup 3DES
+    
+    \brief This function encrypts the input message, in, and stores the 
+    result in the output buffer, out. It uses Triple Des (3DES) encryption 
+    with cipher block chaining (CBC) mode.
+    
+    \return 0 Returned upon successfully encrypting the given input message
+    
+    \param des pointer to the Des3 structure to use for encryption
+    \param out pointer to the buffer in which to store the encrypted ciphertext
+    \param in pointer to the input buffer containing the message to encrypt
+    \param sz length of the message to encrypt
+    
+    _Example_
+    \code
+    Des3 enc; // Des3 structure used for encryption
+    // initialize enc with wc_Des3_SetKey, use mode DES_ENCRYPTION
+
+    byte plain[]  = { // initialize with message };
+    byte cipher[sizeof(plain)];
+
+    if ( wc_Des3_CbcEncrypt(&enc, cipher, plain, sizeof(plain)) != 0) { 
+	    // error encrypting message
+    }
+    \endcode
+    
+    \sa wc_Des3_SetKey
+    \sa wc_Des3_CbcDecrypt
+*/
+WOLFSSL_API int  wc_Des3_CbcEncrypt(Des3* des, byte* out,
+                                    const byte* in,word32 sz);
+/*!
+    \ingroup 3DES
+    
+    \brief This function decrypts the input ciphertext, in, and stores the 
+    resulting plaintext in the output buffer, out. It uses Triple Des (3DES) 
+    encryption with cipher block chaining (CBC) mode.
+    
+    \return 0 Returned upon successfully decrypting the given ciphertext
+    
+    \param des pointer to the Des3 structure to use for decryption
+    \param out pointer to the buffer in which to store the decrypted plaintext
+    \param in pointer to the input buffer containing the encrypted ciphertext
+    \param sz length of the ciphertext to decrypt
+    
+    _Example_
+    \code
+    Des3 dec; // Des structure used for decryption
+    // initialize dec with wc_Des3_SetKey, use mode DES_DECRYPTION
+
+    byte cipher[]  = { // initialize with ciphertext };
+    byte decoded[sizeof(cipher)];
+
+    if ( wc_Des3_CbcDecrypt(&dec, decoded, cipher, sizeof(cipher)) != 0) { 
+    	// error decrypting message
+    }
+    \endcode
+
+    \sa wc_Des3_SetKey
+    \sa wc_Des3_CbcEncrypt
+*/
+WOLFSSL_API int  wc_Des3_CbcDecrypt(Des3* des, byte* out,
+                                    const byte* in,word32 sz);

doc/dox_comments/header_files/dh.h

@@ -0,0 +1,267 @@
+/*!
+    \ingroup Diffie-Hellman
+    
+    \brief This function initializes a Diffie-Hellman key for use in 
+    negotiating a secure secret key with the Diffie-Hellman exchange protocol.
+    
+    \return none No returns.
+    
+    \param key pointer to the DhKey structure to initialize for use with 
+    secure key exchanges
+    
+    _Example_
+    \code
+    DhKey key;
+    wc_InitDhKey(&key); // initialize DH key
+    \endcode
+    
+    \sa wc_FreeDhKey
+    \sa wc_DhGenerateKeyPair
+*/
+WOLFSSL_API int wc_InitDhKey(DhKey* key);
+/*!
+    \ingroup Diffie-Hellman
+    
+    \brief This function frees a Diffie-Hellman key after it has been used to 
+    negotiate a secure secret key with the Diffie-Hellman exchange protocol.
+    
+    \return none No returns.
+    
+    \param key pointer to the DhKey structure to free
+    
+    _Example_
+    \code
+    DhKey key; 
+    // initialize key, perform key exchange
+
+    wc_FreeDhKey(&key); // free DH key to avoid memory leaks
+    \endcode
+    
+    \sa wc_InitDhKey
+*/
+WOLFSSL_API void wc_FreeDhKey(DhKey* key);
+/*!
+    \ingroup Diffie-Hellman
+    
+    \brief This function generates a public/private key pair based on the 
+    Diffie-Hellman public parameters, storing the private key in priv and the 
+    public key in pub. It takes an initialized Diffie-Hellman key and an 
+    initialized rng structure.
+    
+    \return BAD_FUNC_ARG Returned if there is an error parsing one of the 
+    inputs to this function
+    \return RNG_FAILURE_E Returned if there is an error generating a random 
+    number using rng 
+    \return MP_INIT_E May be returned if there is an error in the math library 
+    while generating the public key
+    \return MP_READ_E May be returned if there is an error in the math library 
+    while generating the public key
+    \return MP_EXPTMOD_E May be returned if there is an error in the math 
+    library while generating the public key
+    \return MP_TO_E May be returned if there is an error in the math library 
+    while generating the public key
+    
+    \param key pointer to the DhKey structure from which to generate 
+    the key pair
+    \param rng pointer to an initialized random number generator (rng) with 
+    which to generate the keys
+    \param priv pointer to a buffer in which to store the private key
+    \param privSz will store the size of the private key written to priv
+    \param pub pointer to a buffer in which to store the public key
+    \param pubSz will store the size of the private key written to pub
+
+    _Example_
+    \code
+    DhKey key;
+    int ret;
+    byte priv[256];
+    byte pub[256];
+    word32 privSz, pubSz;
+
+    wc_InitDhKey(&key); // initialize key
+    // Set DH parameters using wc_DhSetKey or wc_DhKeyDecode
+    WC_RNG rng;
+    wc_InitRng(&rng); // initialize rng
+    ret = wc_DhGenerateKeyPair(&key, &rng, priv, &privSz, pub, &pubSz);
+    \endcode
+    
+    \sa wc_InitDhKey
+    \sa wc_DhSetKey
+    \sa wc_DhKeyDecode
+*/
+WOLFSSL_API int wc_DhGenerateKeyPair(DhKey* key, WC_RNG* rng, byte* priv,
+                                 word32* privSz, byte* pub, word32* pubSz);
+/*!
+    \ingroup Diffie-Hellman
+    
+    \brief This function generates an agreed upon secret key based on a local 
+    private key and a received public key. If completed on both sides of an 
+    exchange, this function generates an agreed upon secret key for symmetric 
+    communication. On successfully generating a shared secret key, the size of 
+    the secret key written will be stored in agreeSz.
+    
+    \return 0 Returned on successfully generating an agreed upon secret key
+    \return MP_INIT_E May be returned if there is an error while generating 
+    the shared secret key
+    \return MP_READ_E May be returned if there is an error while generating 
+    the shared secret key
+    \return MP_EXPTMOD_E May be returned if there is an error while generating 
+    the shared secret key
+    \return MP_TO_E May be returned if there is an error while generating the 
+    shared secret key
+    
+    \param key pointer to the DhKey structure to use to compute the shared key
+    \param agree pointer to the buffer in which to store the secret key
+    \param agreeSz will hold the size of the secret key after 
+    successful generation
+    \param priv pointer to the buffer containing the local secret key
+    \param privSz size of the local secret key
+    \param otherPub pointer to a buffer containing the received public key
+    \param pubSz size of the received public key
+    
+    _Example_
+    \code
+    DhKey key;
+    int ret;
+    byte priv[256];
+    byte agree[256];
+    word32 agreeSz;
+
+    // initialize key, set key prime and base
+    // wc_DhGenerateKeyPair -- store private key in priv
+    byte pub[] = { // initialized with the received public key };
+    ret = wc_DhAgree(&key, agree, &agreeSz, priv, sizeof(priv), pub, 
+    sizeof(pub));
+    if ( ret != 0 ) {
+    	// error generating shared key
+    }
+    \endcode
+    
+    \sa wc_DhGenerateKeyPair
+*/
+WOLFSSL_API int wc_DhAgree(DhKey* key, byte* agree, word32* agreeSz,
+                       const byte* priv, word32 privSz, const byte* otherPub,
+                       word32 pubSz);
+/*!
+    \ingroup Diffie-Hellman
+    
+    \brief This function decodes a Diffie-Hellman key from the given input 
+    buffer containing the key in DER format. It stores the result in the 
+    DhKey structure.
+    
+    \return 0 Returned on successfully decoding the input key
+    \return ASN_PARSE_E Returned if there is an error parsing the sequence 
+    of the input
+    \return ASN_DH_KEY_E Returned if there is an error reading the private 
+    key parameters from the parsed input
+
+    \param input pointer to the buffer containing the DER formatted 
+    Diffie-Hellman key
+    \param inOutIdx pointer to an integer in which to store the index parsed 
+    to while decoding the key
+    \param key pointer to the DhKey structure to initialize with the input key
+    \param inSz length of the input buffer. Gives the max length that may 
+    be read
+
+    _Example_
+    \code
+    DhKey key;
+    word32 idx = 0;
+
+    byte keyBuff[1024]; 
+    // initialize with DER formatted key
+    wc_DhKeyInit(&key);
+    ret = wc_DhKeyDecode(keyBuff, &idx, &key, sizeof(keyBuff));
+
+    if ( ret != 0 ) {
+    	// error decoding key
+    }
+    \endcode
+    
+    \sa wc_DhSetKey
+*/
+WOLFSSL_API int wc_DhKeyDecode(const byte* input, word32* inOutIdx, DhKey* key,
+                           word32);
+/*!
+    \ingroup Diffie-Hellman
+    
+    \brief This function sets the key for a DhKey structure using the input 
+    private key parameters. Unlike wc_DhKeyDecode, this function does not 
+    require that the input key be formatted in DER format, and instead simply 
+    accepts the parsed input parameters p (prime) and g (base).
+    
+    \return 0 Returned on successfully setting the key
+    \return BAD_FUNC_ARG Returned if any of the input parameters 
+    evaluate to NULL
+    \return MP_INIT_E Returned if there is an error initializing the key 
+    parameters for storage 
+    \return ASN_DH_KEY_E Returned if there is an error reading in the 
+    DH key parameters p and g
+
+    \param key pointer to the DhKey structure on which to set the key
+    \param p pointer to the buffer containing the prime for use with the key
+    \param pSz length of the input prime
+    \param g pointer to the buffer containing the base for use with the key
+    \param gSz length of the input base
+    
+    _Example_
+    \code
+    DhKey key;
+
+    byte p[] = { // initialize with prime };
+    byte g[] = { // initialize with base };
+    wc_DhKeyInit(&key);
+    ret = wc_DhSetKey(key, p, sizeof(p), g, sizeof(g));
+
+    if ( ret != 0 ) {
+    	// error setting key
+    }
+    \endcode
+    
+    \sa wc_DhKeyDecode
+*/
+WOLFSSL_API int wc_DhSetKey(DhKey* key, const byte* p, word32 pSz, const byte* g,
+                        word32 gSz);
+/*!
+    \ingroup Diffie-Hellman
+    
+    \brief This function loads the Diffie-Hellman parameters, p (prime) 
+    and g (base) out of the given input buffer, DER formatted.
+    
+    \return 0 Returned on successfully extracting the DH parameters
+    \return ASN_PARSE_E Returned if an error occurs while parsing the DER 
+    formatted DH certificate
+    \return BUFFER_E Returned if there is inadequate space in p or g to 
+    store the parsed parameters
+
+    \parma input pointer to a buffer containing a DER formatted 
+    Diffie-Hellman certificate to parse
+    \parma inSz size of the input buffer
+    \parma p pointer to a buffer in which to store the parsed prime
+    \parma pInOutSz pointer to a word32 object containing the available 
+    size in the p buffer. Will be overwritten with the number of bytes 
+    written to the buffer after completing the function call
+    \parma g pointer to a buffer in which to store the parsed base
+    \parma gInOutSz pointer to a word32 object containing the available size 
+    in the g buffer. Will be overwritten with the number of bytes written to 
+    the buffer after completing the function call
+
+    _Example_
+    \code
+    byte dhCert[] = { initialize with DER formatted certificate };
+    byte p[MAX_DH_SIZE];
+    byte g[MAX_DH_SIZE];
+    word32 pSz = MAX_DH_SIZE;
+    word32 gSz = MAX_DH_SIZE;
+
+    ret = wc_DhParamsLoad(dhCert, sizeof(dhCert), p, &pSz, g, &gSz);
+    if ( ret != 0 ) {
+    	// error parsing inputs
+    }
+    \endcode
+    
+    \sa wc_DhSetKey
+    \sa wc_DhKeyDecode
+*/
+WOLFSSL_API int wc_DhParamsLoad(const byte* input, word32 inSz, byte* p,
+                            word32* pInOutSz, byte* g, word32* gInOutSz);

doc/dox_comments/header_files/doxygen_groups.h

@@ -0,0 +1,47 @@
+/*!
+    \defgroup 3DES Algorithms - 3DES
+    \defgroup AES Algorithms - AES
+    \defgroup ARC4 Algorithms - ARC4
+    \defgroup BLAKE2 Algorithms - BLAKE2
+    \defgroup Camellia Algorithms - Camellia
+    \defgroup ChaCha Algorithms - ChaCha
+    \defgroup ChaCha20Poly1305 Algorithms - ChaCha20_Poly1305
+    \defgroup Curve25519 Algorithms - Curve25519
+    \defgroup DSA Algorithms - DSA
+    \defgroup Diffie-Hellman Algorithms - Diffie-Hellman
+    \defgroup ECC Algorithms - ECC
+    \defgroup ED25519 Algorithms - ED25519
+    \defgroup HC128 Algorithms - HC-128
+    \defgroup HMAC Algorithms - HMAC
+    \defgroup IDEA Algorithms - IDEA
+    \defgroup MD2 Algorithms - MD2
+    \defgroup MD4 Algorithms - MD4
+    \defgroup MD5 Algorithms - MD5
+    \defgroup PKCS7 Algorithms - PKCS7
+    \defgroup Password Algorithms - Password Based
+    \defgroup Poly1305 Algorithms - Poly1305
+    \defgroup RIPEMD Algorithms - RIPEMD
+    \defgroup RSA Algorithms - RSA
+    \defgroup Rabbit Algorithms - Rabbit
+    \defgroup SHA Algorithms - SHA 128/224/256/384/512
+    \defgroup SRP Algorithms - SRP
+
+    \defgroup ASN ASN.1
+    \defgroup Base_Encoding Base Encoding
+    \defgroup CertManager CertManager API
+    \defgroup Compression Compression
+    \defgroup Error Error Reporting
+    \defgroup Keys Key and Cert Conversion
+    \defgroup Logging Logging
+    \defgroup Math Math API
+    \defgroup Memory Memory Handling
+    \defgroup Random Random Number Generation
+    \defgroup Signature Signature API
+    \defgroup openSSL OpenSSL API
+    \defgroup wolfCrypt wolfCrypt Init and Cleanup
+    \defgroup TLS wolfSSL Initialization/Shutdown
+    \defgroup CertsKeys wolfSSL Certificates and Keys
+    \defgroup Setup wolfSSL Context and Session Set Up
+    \defgroup IO wolfSSL Connection, Session, and I/O
+    \defgroup Debug wolfSSL Error Handling and Reporting
+*/

doc/dox_comments/header_files/dsa.h

@@ -0,0 +1,334 @@
+/*!
+    \ingroup DSA
+    
+    \brief This function initializes a DsaKey object in order to use it for 
+    authentication via the Digital Signature Algorithm (DSA).
+    
+    \return 0 Returned on success.
+    \return BAD_FUNC_ARG Returned if a NULL key is passed in.
+    
+    \param key pointer to the DsaKey structure to initialize
+    
+    _Example_
+    \code
+    DsaKey key;
+    int ret;
+    ret = wc_InitDsaKey(&key); // initialize DSA key
+    \endcode
+    
+    \sa wc_FreeDsaKey
+*/
+WOLFSSL_API int wc_InitDsaKey(DsaKey* key);
+/*!
+    \ingroup DSA
+    
+    \brief This function frees a DsaKey object after it has been used.
+    
+    \return none No returns.
+    
+    \param key pointer to the DsaKey structure to free
+    
+    _Example_
+    \code
+    DsaKey key;
+    // initialize key, use for authentication
+    ...
+    wc_FreeDsaKey(&key); // free DSA key
+    \endcode
+    
+    \sa wc_FreeDsaKey
+*/
+WOLFSSL_API void wc_FreeDsaKey(DsaKey* key);
+/*!
+    \ingroup DSA
+    
+    \brief This function signs the input digest and stores the result in the 
+    output buffer, out.
+    
+    \return 0 Returned on successfully signing the input digest
+    \return MP_INIT_E may be returned if there is an error in processing the 
+    DSA signature.
+    \return MP_READ_E may be returned if there is an error in processing the 
+    DSA signature.
+    \return MP_CMP_E may be returned if there is an error in processing the 
+    DSA signature.
+    \return MP_INVMOD_E may be returned if there is an error in processing the 
+    DSA signature.
+    \return MP_EXPTMOD_E may be returned if there is an error in processing 
+    the DSA signature.
+    \return MP_MOD_E may be returned if there is an error in processing the 
+    DSA signature.
+    \return MP_MUL_E may be returned if there is an error in processing the 
+    DSA signature.
+    \return MP_ADD_E may be returned if there is an error in processing the 
+    DSA signature.
+    \return MP_MULMOD_E may be returned if there is an error in processing 
+    the DSA signature.
+    \return MP_TO_E may be returned if there is an error in processing the 
+    DSA signature.
+    \return MP_MEM may be returned if there is an error in processing the 
+    DSA signature.
+    
+    \param digest pointer to the hash to sign
+    \param out pointer to the buffer in which to store the signature
+    \param key pointer to the initialized DsaKey structure with which to 
+    generate the signature
+    \param rng pointer to an initialized RNG to use with the signature 
+    generation
+    
+    _Example_
+    \code
+    DsaKey key;
+    // initialize DSA key, load private Key
+    int ret;
+    WC_RNG rng;
+    wc_InitRng(&rng);
+    byte hash[] = { // initialize with hash digest };
+    byte signature[40]; // signature will be 40 bytes (320 bits)
+
+    ret = wc_DsaSign(hash, signature, &key, &rng);
+    if (ret != 0) { 
+	    // error generating DSA signature
+    }
+    \endcode
+    
+    \sa wc_DsaVerify
+*/
+WOLFSSL_API int wc_DsaSign(const byte* digest, byte* out,
+                           DsaKey* key, WC_RNG* rng);
+/*!
+    \ingroup DSA
+    
+    \brief This function verifies the signature of a digest, given a private 
+    key. It stores whether the key properly verifies in the answer parameter, 
+    with 1 corresponding to a successful verification, and 0 corresponding to 
+    failed verification.
+    
+    \return 0 Returned on successfully processing the verify request. Note: 
+    this does not mean that the signature is verified, only that the function 
+    succeeded
+    \return MP_INIT_E may be returned if there is an error in processing the 
+    DSA signature.
+    \return MP_READ_E may be returned if there is an error in processing the 
+    DSA signature.
+    \return MP_CMP_E may be returned if there is an error in processing the 
+    DSA signature.
+    \return MP_INVMOD_E may be returned if there is an error in processing 
+    the DSA signature.
+    \return MP_EXPTMOD_E may be returned if there is an error in processing 
+    the DSA signature.
+    \return MP_MOD_E may be returned if there is an error in processing the 
+    DSA signature.
+    \return MP_MUL_E may be returned if there is an error in processing the 
+    DSA signature.
+    \return MP_ADD_E may be returned if there is an error in processing the 
+    DSA signature.
+    \return MP_MULMOD_E may be returned if there is an error in processing 
+    the DSA signature.
+    \return MP_TO_E may be returned if there is an error in processing the 
+    DSA signature.
+    \return MP_MEM may be returned if there is an error in processing the 
+    DSA signature.
+    
+    \param digest pointer to the digest containing the subject of the signature
+    \param sig pointer to the buffer containing the signature to verify
+    \param key pointer to the initialized DsaKey structure with which to 
+    verify the signature
+    \param answer pointer to an integer which will store whether the 
+    verification was successful
+    
+    _Example_
+    \code
+    DsaKey key;
+    // initialize DSA key, load public Key
+
+    int ret;
+    int verified;
+    byte hash[] = { // initialize with hash digest };
+    byte signature[] = { // initialize with signature to verify };
+    ret = wc_DsaVerify(hash, signature, &key, &verified);
+    if (ret != 0) { 
+    	// error processing verify request
+    } else if (answer == 0) {
+    	// invalid signature
+    }
+    \endcode
+    
+    \sa wc_DsaSign
+*/
+WOLFSSL_API int wc_DsaVerify(const byte* digest, const byte* sig,
+                             DsaKey* key, int* answer);
+/*!
+    \ingroup DSA
+    
+    \brief This function decodes a DER formatted certificate buffer containing 
+    a DSA public key, and stores the key in the given DsaKey structure. It 
+    also sets the inOutIdx parameter according to the length of the input read.
+    
+    \return 0 Returned on successfully setting the public key for the DsaKey 
+    object
+    \return ASN_PARSE_E Returned if there is an error in the encoding while 
+    reading the certificate buffer
+    \return ASN_DH_KEY_E Returned if one of the DSA parameters is incorrectly 
+    formatted
+
+    \param input pointer to the buffer containing the DER formatted DSA 
+    public key
+    \param inOutIdx pointer to an integer in which to store the final index 
+    of the certificate read
+    \param key pointer to the DsaKey structure in which to store the public key
+    \param inSz size of the input buffer
+
+    _Example_
+    \code
+    int ret, idx=0;
+
+    DsaKey key;
+    wc_InitDsaKey(&key);
+    byte derBuff[] = { // DSA public key};
+    ret = wc_DsaPublicKeyDecode(derBuff, &idx, &key, inSz);
+    if (ret != 0) { 
+    	// error reading public key
+    }
+    \endcode
+    
+    \sa wc_InitDsaKey
+    \sa wc_DsaPrivateKeyDecode
+*/
+WOLFSSL_API int wc_DsaPublicKeyDecode(const byte* input, word32* inOutIdx,
+                                      DsaKey*, word32);
+/*!
+    \ingroup DSA
+    
+    \brief This function decodes a DER formatted certificate buffer containing 
+    a DSA private key, and stores the key in the given DsaKey structure. It 
+    also sets the inOutIdx parameter according to the length of the input read.
+    
+    \return 0 Returned on successfully setting the private key for the DsaKey 
+    object
+    \return ASN_PARSE_E Returned if there is an error in the encoding while 
+    reading the certificate buffer
+    \return ASN_DH_KEY_E Returned if one of the DSA parameters is incorrectly 
+    formatted
+
+    \param input pointer to the buffer containing the DER formatted DSA 
+    private key
+    \param inOutIdx pointer to an integer in which to store the final index 
+    of the certificate read
+    \param key pointer to the DsaKey structure in which to store the private 
+    key
+    \param inSz size of the input buffer
+
+    _Example_
+    \code
+    int ret, idx=0;
+
+    DsaKey key;
+    wc_InitDsaKey(&key);
+    byte derBuff[] = { // DSA private key };
+    ret = wc_DsaPrivateKeyDecode(derBuff, &idx, &key, inSz);
+    if (ret != 0) { 
+    	// error reading private key
+    }
+    \endcode
+    
+    \sa wc_InitDsaKey
+    \sa wc_DsaPublicKeyDecode
+*/
+WOLFSSL_API int wc_DsaPrivateKeyDecode(const byte* input, word32* inOutIdx,
+                                       DsaKey*, word32);
+/*!
+    \ingroup DSA
+    
+    \brief Convert DsaKey key to DER format, write to output (inLen), 
+    return bytes written.
+    
+    \return outLen Success, number of bytes written
+    \return BAD_FUNC_ARG key or output are null or key->type is not 
+    DSA_PRIVATE.
+    \return MEMORY_E Error allocating memory.
+
+    \param key Pointer to DsaKey structure to convert.
+    \param output Pointer to output buffer for converted key.
+    \param inLen Length of key input.
+
+    _Example_
+    \code
+    DsaKey key;
+    WC_WC_RNG rng;
+    int derSz;
+    int bufferSize = // Sufficient buffer size;
+    byte der[bufferSize];
+
+    wc_InitDsaKey(&key);
+    wc_InitRng(&rng);
+    wc_MakeDsaKey(&rng, &key);
+    derSz = wc_DsaKeyToDer(&key, der, bufferSize);
+    \endcode
+    
+    \sa wc_InitDsaKey
+    \sa wc_FreeDsaKey
+    \sa wc_MakeDsaKey
+*/
+WOLFSSL_API int wc_DsaKeyToDer(DsaKey* key, byte* output, word32 inLen);
+/*!
+    \ingroup DSA
+    
+    \brief Create a DSA key.
+    
+    \return MP_OKAY Success
+    \return BAD_FUNC_ARG Either rng or dsa is null. 
+    \return MEMORY_E Couldn't allocate memory for buffer.
+    \return MP_INIT_E Error initializing mp_int
+
+    \param rng Pointer to WC_RNG structure.
+    \param dsa Pointer to DsaKey structure.
+
+    _Example_
+    \code
+    WC_WC_RNG rng;
+    DsaKey dsa;
+    wc_InitRng(&rng);
+    wc_InitDsa(&dsa);
+    if(wc_MakeDsaKey(&rng, &dsa) != 0)
+    {
+        // Error creating key
+    }
+    \endcode
+    
+    \sa wc_InitDsaKey
+    \sa wc_FreeDsaKey
+    \sa wc_DsaSign
+*/
+WOLFSSL_API int wc_MakeDsaKey(WC_RNG *rng, DsaKey *dsa);
+/*!
+    \ingroup DSA
+    
+    \brief FIPS 186-4 defines valid for modulus_size values as 
+    (1024, 160) (2048, 256) (3072, 256)
+    
+    \return 0 Success
+    \return BAD_FUNC_ARG rng or dsa is null or modulus_size is invalid.
+    \return MEMORY_E Error attempting to allocate memory.
+
+    \param rng pointer to wolfCrypt rng.
+    \param modulus_size 1024, 2048, or 3072 are valid values.
+    \param dsa Pointer to a DsaKey structure.
+
+    _Example_
+    \code
+    DsaKey key;
+    WC_WC_RNG rng;
+    wc_InitDsaKey(&key);
+    wc_InitRng(&rng);
+    if(wc_MakeDsaParameters(&rng, 1024, &genKey) != 0)
+    {
+        // Handle error
+    }
+    \endcode
+    
+    \sa wc_MakeDsaKey
+    \sa wc_DsaKeyToDer
+    \sa wc_InitDsaKey
+*/
+WOLFSSL_API int wc_MakeDsaParameters(WC_RNG *rng, int modulus_size, DsaKey *dsa);

doc/dox_comments/header_files/ed25519.h

@@ -0,0 +1,497 @@
+/*!
+    \ingroup ED25519
+    
+    \brief This function generates a new ed25519_key and stores it in key.
+    
+    \retrun 0 Returned upon successfully making an ed25519_key
+    \retrun BAD_FUNC_ARG Returned if rng or key evaluate to NULL, or if the 
+    specified key size is not 32 bytes (ed25519 has 32 byte keys)
+    \retrun MEMORY_E Returned if there is an error allocating memory 
+    during function execution
+
+    \param rng pointer to an initialized RNG object with which to 
+    generate the key
+    \param keysize length of key to generate. Should always be 32 for ed25519
+    \param key pointer to the ed25519_key for which to generate a key
+
+    _Example_
+    \code
+    ed25519_key key;
+    wc_ed25519_init(&key);
+    WC_RNG rng;
+    wc_InitRng(&rng);
+    wc_ed25519_make_key(&rng, 32, &key); // initialize 32 byte ed25519 key
+    \endcode
+    
+    \sa wc_ed25519_init
+*/
+WOLFSSL_API
+int wc_ed25519_make_key(WC_RNG* rng, int keysize, ed25519_key* key);
+/*!
+    \ingroup ED25519
+    
+    \brief This function signs a message digest using an ed25519_key object 
+    to guarantee authenticity.
+    
+    \return 0 Returned upon successfully generating a signature for the 
+    message digest
+    \return BAD_FUNC_ARG Returned any of the input parameters evaluate to 
+    NULL, or if the output buffer is too small to store the generated signature
+    \return MEMORY_E Returned if there is an error allocating memory during 
+    function execution
+    
+    \param in pointer to the buffer containing the message to sign
+    \param inlen length of the message to sign
+    \param out buffer in which to store the generated signature
+    \param outlen max length of the output buffer. Will store the bytes 
+    written to out upon successfully generating a message signature
+    \param key pointer to a private ed25519_key with which to generate the 
+    signature
+    
+    _Example_
+    \code
+    ed25519_key key;
+    WC_RNG rng;
+    int ret, sigSz;
+
+    byte sig[64]; // will hold generated signature
+    sigSz = sizeof(sig);
+    byte message[] = { // initialize with message };
+
+    wc_InitRng(&rng); // initialize rng
+    wc_ed25519_init(&key); // initialize key
+    wc_ed25519_make_key(&rng, 32, &key); // make public/private key pair
+    ret = wc_ed25519_sign_msg(message, sizeof(message), sig, &sigSz, &key);
+    if ( ret != 0 ) {
+    	// error generating message signature
+    }
+    \endcode
+    
+    \sa wc_ed25519_verify_msg
+*/
+WOLFSSL_API
+int wc_ed25519_sign_msg(const byte* in, word32 inlen, byte* out,
+                        word32 *outlen, ed25519_key* key);
+/*!
+    \ingroup ED25519
+    
+    \brief This function verifies the ed25519 signature of a message to ensure 
+    authenticity. It returns the answer through stat, with 1 corresponding to 
+    a valid signature, and 0 corresponding to an invalid signature.
+    
+    \return 0 Returned upon successfully performing the signature 
+    verification. Note: This does not mean that the signature is verified. 
+    The authenticity information is stored instead in stat
+    \return BAD_FUNC_ARG Returned if any of the input parameters evaluate to 
+    NULL, or if the siglen does not match the actual length of a signature
+    \return 1 Returned if verification completes, but the signature generated 
+    does not match the signature provided
+    
+     \param sig pointer to the buffer containing the signature to verify
+     \param siglen length of the signature to verify
+     \param msg pointer to the buffer containing the message to verify
+     \param msglen length of the message to verify
+     \param stat pointer to the result of the verification. 1 indicates the 
+    message was successfully verified
+     \param key pointer to a public ed25519 key with which to verify the 
+    signature
+
+    _Example_
+    \code
+    ed25519_key key;
+    int ret, verified = 0;
+
+    byte sig[] { // initialize with received signature };
+    byte msg[] = { // initialize with message };
+    // initialize key with received public key
+    ret = wc_ed25519_verify_msg(sig, sizeof(sig), msg, sizeof(msg), 
+    &verified, &key);
+
+    if ( return < 0 ) {
+	    // error performing verification
+    } else if ( verified == 0  )
+	    // the signature is invalid
+    }
+    \endcode
+    
+    \sa wc_ed25519_sign_msg
+*/
+WOLFSSL_API
+int wc_ed25519_verify_msg(const byte* sig, word32 siglen, const byte* msg,
+                          word32 msglen, int* stat, ed25519_key* key);
+/*!
+    \ingroup ED25519
+    
+    \brief This function initializes an ed25519_key object for future use 
+    with message verification.
+    
+    \return 0 Returned upon successfully initializing the ed25519_key object
+    \return BAD_FUNC_ARG Returned if key is NULL
+    
+    \param key pointer to the ed25519_key object to initialize
+    
+    _Example_
+    \code
+    ed25519_key key;
+    wc_ed25519_init(&key);
+    \endcode
+    
+    \sa wc_ed25519_make_key
+    \sa wc_ed25519_free
+*/
+WOLFSSL_API
+int wc_ed25519_init(ed25519_key* key);
+/*!
+    \ingroup ED25519
+    
+    \brief This function frees an ed25519 object after it has been used.
+    
+    \return none No returns.
+    
+    \param key pointer to the ed25519_key object to free
+    
+    _Example_
+    \code
+    ed25519_key key;
+    // initialize key and perform secure exchanges
+    ...
+    wc_ed25519_free(&key);
+    \endcode
+    
+    \sa wc_ed25519_init
+*/
+WOLFSSL_API
+void wc_ed25519_free(ed25519_key* key);
+/*!
+    \ingroup ED25519
+    
+    \brief This function imports a public ed25519_key pair from a buffer 
+    containing the public key. This function will handle both compressed and 
+    uncompressed keys.
+    
+    \return 0 Returned on successfully importing the ed25519_key
+    \return BAD_FUNC_ARG Returned if in or key evaluate to NULL, or inLen is 
+    less than the size of an ed25519 key
+    
+    \param in pointer to the buffer containing the public key
+    \param inLen length of the buffer containing the public key
+    \param key pointer to the ed25519_key object in which to store the 
+    public key
+    
+    _Example_
+    \code
+    int ret;
+    byte pub[] = { // initialize ed25519 public key };
+
+    ed_25519 key;
+    wc_ed25519_init_key(&key);
+    ret = wc_ed25519_import_public(pub, sizeof(pub), &key);
+    if ( ret != 0) {
+    	// error importing key
+    }
+    \endcode
+    
+    \sa wc_ed25519_import_private_key
+    \sa wc_ed25519_export_public
+*/
+WOLFSSL_API
+int wc_ed25519_import_public(const byte* in, word32 inLen, ed25519_key* key);
+/*!
+    \ingroup ED25519
+    
+    \brief This function imports a public/private ed25519 key pair from a 
+    pair of buffers. This function will handle both compressed and 
+    uncompressed keys.
+    
+    \return 0 Returned on successfully importing the ed25519_key
+    \return BAD_FUNC_ARG Returned if in or key evaluate to NULL, or if 
+    either privSz or pubSz are less than the size of an ed25519 key
+    
+    \param priv pointer to the buffer containing the private key
+    \param privSz size of the private key
+    \param pub pointer to the buffer containing the public key
+    \param pubSz length of the public key
+    \param key pointer to the ed25519_key object in which to store the 
+    imported private/public key pair
+
+    _Example_
+    \code
+    int ret;
+    byte priv[] = { // initialize with 32 byte private key };
+    byte pub[]  = { // initialize with the corresponding public key };
+
+    ed25519_key key;
+    wc_ed25519_init_key(&key);
+    ret = wc_ed25519_import_private_key(priv, sizeof(priv), pub, 
+    sizeof(pub), &key);
+    if ( ret != 0) {
+    	// error importing key
+    }
+    \endcode
+    
+    \sa wc_ed25519_import_public_key
+    \sa wc_ed25519_export_private_only
+*/
+WOLFSSL_API
+int wc_ed25519_import_private_key(const byte* priv, word32 privSz,
+                               const byte* pub, word32 pubSz, ed25519_key* key);
+/*!
+    \ingroup ED25519
+    
+    \brief This function exports the private key from an ed25519_key 
+    structure. It stores the public key in the buffer out, and sets the bytes 
+    written to this buffer in outLen.
+    
+    \return 0 Returned upon successfully exporting the public key
+    \return BAD_FUNC_ARG Returned if any of the input values evaluate to NULL
+    \return BUFFER_E Returned if the buffer provided is not large enough to 
+    store the private key. Upon returning this error, the function sets the 
+    size required in outLen
+    
+    \param key pointer to an ed25519_key structure from which to export the 
+    public key
+    \param out pointer to the buffer in which to store the public key
+    \param outLen pointer to a word32 object with the size available in out. 
+    Set with the number of bytes written to out after successfully exporting 
+    the private key
+
+    _Example_
+    \code
+    int ret;
+    ed25519_key key;
+    // initialize key, make key
+
+    char pub[32];
+    word32 pubSz = sizeof(pub);
+
+    ret = wc_ed25519_export_public(&key, pub, &pubSz);
+    if ( ret != 0) {
+	    // error exporting public key
+    }
+    \endcode
+    
+    \sa wc_ed25519_import_public_key
+    \sa wc_ed25519_export_private_only
+*/
+WOLFSSL_API
+int wc_ed25519_export_public(ed25519_key*, byte* out, word32* outLen);
+/*!
+    \ingroup ED25519
+    
+    \brief This function exports only the private key from an ed25519_key 
+    structure. It stores the private key in the buffer out, and sets 
+    the bytes written to this buffer in outLen.
+    
+    \return 0 Returned upon successfully exporting the private key
+    \return ECC_BAD_ARG_E Returned if any of the input values evaluate to NULL
+    \return BUFFER_E Returned if the buffer provided is not large enough 
+    to store the private key
+    
+    \param key pointer to an ed25519_key structure from which to export 
+    the private key
+    \param out pointer to the buffer in which to store the private key
+    \param outLen pointer to a word32 object with the size available in 
+    out. Set with the number of bytes written to out after successfully 
+    exporting the private key
+    
+    _Example_
+    \code
+    int ret;
+    ed25519_key key;
+    // initialize key, make key
+
+    char priv[32]; // 32 bytes because only private key
+    word32 privSz = sizeof(priv);
+    ret = wc_ed25519_export_private_only(&key, priv, &privSz);
+    if ( ret != 0) {
+    	// error exporting private key
+    }
+    \endcode
+    
+    \sa wc_ed25519_export_public
+    \sa wc_ed25519_import_private_key
+*/
+WOLFSSL_API
+int wc_ed25519_export_private_only(ed25519_key* key, byte* out, word32* outLen);
+/*!
+    \ingroup ED25519
+    
+    \brief Export the private key, including public part.
+
+    \return 0 Success
+    \return BAD_FUNC_ARG Returns if any argument is null.
+    \return BUFFER_E Returns if outLen is less than ED25519_PRV_KEY_SIZE
+
+    \param key ed25519_key struct to export from.
+    \param out Destination for private key.
+    \param outLen Max length of output, set to the length of the exported 
+    private key.
+    
+    _Example_
+    \code
+    ed25519_key key;
+    wc_ed25519_init(&key);
+
+    WC_RNG rng;
+    wc_InitRng(&rng);
+
+    wc_ed25519_make_key(&rng, 32, &key); // initialize 32 byte ed25519 key
+
+    byte out[32]; // out needs to be a sufficient buffer size
+    word32 outLen = sizeof(out);
+    int key_size = wc_ed25519_export_private(&key, out, &outLen);
+    if(key_size == BUFFER_E)
+    {
+        // Check size of out compared to outLen to see if function reset outLen
+    }
+    \endcode
+    
+    \sa none
+*/
+WOLFSSL_API
+int wc_ed25519_export_private(ed25519_key* key, byte* out, word32* outLen);
+/*!
+    \ingroup ED25519
+    
+    \brief Export full private key and public key.
+    
+    \return 0 Success
+    \return BAD_FUNC_ARG: Returns if any argument is null.
+    \return BUFFER_E: Returns if outLen is less than ED25519_PRV_KEY_SIZE 
+    or ED25519_PUB_KEY_SIZE
+    
+    \param key The ed25519_key structure to export to.
+    \param priv Byte array to store private key.
+    \param privSz Size of priv buffer.
+    \param pub Byte array to store public key.
+    \param pubSz Size of pub buffer.
+
+    _Example_
+    \code
+    int ret;
+    ed25519_key key;
+    // initialize key, make key
+
+    char pub[32];
+    word32 pubSz = sizeof(pub);
+    char priv[32];
+    word32 privSz = sizeof(priv);
+
+    ret = wc_ed25519_export_key(&key, priv, &pubSz, pub, &pubSz);
+    if ( ret != 0) {
+    	// error exporting public key
+    }
+    \endcode
+    
+    \sa wc_ed25519_export_private
+    \sa wc_ed25519_export_public
+*/
+WOLFSSL_API
+int wc_ed25519_export_key(ed25519_key* key,
+                          byte* priv, word32 *privSz,
+                          byte* pub, word32 *pubSz);
+/*!
+    \ingroup ED25519
+    
+    \brief This function returns the key size of an ed25519_key structure, 
+    or 32 bytes.
+    
+    \return Success Given a valid key, returns ED25519_KEY_SIZE (32 bytes)
+    \return BAD_FUNC_ARGS Returned if the given key is NULL
+    
+    \param key pointer to an ed25519_key structure for which to get the 
+    key size
+    
+    _Example_
+    \code
+    int keySz;
+    ed25519_key key;
+    // initialize key, make key
+    keySz = wc_ed25519_size(&key);
+    if ( keySz == 0) {
+	    // error determining key size
+    }
+    \endcode
+    
+    \sa wc_ed25519_make_key
+*/
+WOLFSSL_API
+int wc_ed25519_size(ed25519_key* key);
+/*!
+    \ingroup ED25519
+    
+    \brief Returns the private key size (secret + public) in bytes.
+    
+    \return BAD_FUNC_ARG Returns if key argument is null.
+    \return ED25519_PRV_KEY_SIZE The size of the private key.
+    
+    \param key The ed25119_key struct
+    
+    _Example_
+    \code
+    ed25519_key key;
+    wc_ed25519_init(&key);
+
+    WC_RNG rng;
+    wc_InitRng(&rng);
+
+    wc_ed25519_make_key(&rng, 32, &key); // initialize 32 byte ed25519 key
+    int key_size = wc_ed25519_priv_size(&key);
+    \endcode
+    
+    \sa wc_ed25119_pub_size
+*/
+WOLFSSL_API
+int wc_ed25519_priv_size(ed25519_key* key);
+/*!
+    \ingroup ED25519
+    
+    \brief Returns the compressed key size in bytes (public key).
+    
+    \return BAD_FUNC_ARG returns if key is null.
+    \return ED25519_PUB_KEY_SIZE Size of key.
+    
+    \param key Pointer to the ed25519_key struct.
+    
+    _Example_
+    \code
+    ed25519_key key;
+    wc_ed25519_init(&key);
+    WC_RNG rng;
+    wc_InitRng(&rng);
+
+    wc_ed25519_make_key(&rng, 32, &key); // initialize 32 byte ed25519 key
+    int key_size = wc_ed25519_pub_size(&key);
+    \endcode
+    
+    \sa wc_ed25519_priv_size
+*/
+WOLFSSL_API
+int wc_ed25519_pub_size(ed25519_key* key);
+/*!
+    \ingroup ED25519
+    
+    \brief This function returns the size of an ed25519 signature (64 in bytes).
+    
+    \return Success Given a valid key, returns ED25519_SIG_SIZE (64 in bytes)
+    \return 0 Returned if the given key is NULL
+    
+    \param key pointer to an ed25519_key structure for which to get the 
+    signature size
+    
+    _Example_
+    \code
+    int sigSz;
+    ed25519_key key;
+    // initialize key, make key
+
+    sigSz = wc_ed25519_sig_size(&key);
+    if ( sigSz == 0) {
+    	// error determining sig size
+    }
+    \endcode
+    
+    \sa wc_ed25519_sign_msg
+*/
+WOLFSSL_API
+int wc_ed25519_sig_size(ed25519_key* key);

doc/dox_comments/header_files/error-crypt.h

@@ -0,0 +1,48 @@
+/*!
+    \ingroup Error
+    
+    \brief This function stores the error string for a particular error code 
+    in the given buffer.
+    
+    \return none No returns.
+    
+    \param error error code for which to get the string
+    \param buffer buffer in which to store the error string. Buffer should be 
+    at least WOLFSSL_MAX_ERROR_SZ (80 bytes) long
+    
+    _Example_
+    \code
+    char errorMsg[WOLFSSL_MAX_ERROR_SZ];
+    int err = wc_some_function();
+
+    if( err != 0) { // error occurred
+    	wc_ErrorString(err, errorMsg);
+    }
+    \endcode
+    
+    \sa wc_GetErrorString
+*/
+WOLFSSL_API void wc_ErrorString(int err, char* buff);
+/*!
+    \ingroup Error
+    
+    \brief This function returns the error string for a particular error code.
+    
+    \return string Returns the error string for an error code as a 
+    string literal.
+    
+    \param error error code for which to get the string
+    
+    _Example_
+    \code
+    char * errorMsg;
+    int err = wc_some_function();
+
+    if( err != 0) { // error occurred
+    	errorMsg = wc_GetErrorString(err);
+    }
+    \endcode
+    
+    \sa wc_ErrorString
+*/
+WOLFSSL_API const char* wc_GetErrorString(int error);

doc/dox_comments/header_files/evp.h

@@ -0,0 +1,385 @@
+/*!
+    \ingroup openSSL
+    
+    \brief Getter functions for the respective WOLFSSL_EVP_CIPHER pointers. 
+    wolfSSL_EVP_init() must be called once in the program first to populate 
+    these cipher strings. WOLFSSL_DES_ECB macro must be defined for 
+    wolfSSL_EVP_des_ede3_ecb().
+    
+    \return pointer Returns a WOLFSSL_EVP_CIPHER pointer for DES EDE3 operations.
+    
+    \param none No parameters.
+    
+    _Example_
+    \code
+    printf("block size des ede3 cbc = %d\n", 
+    wolfSSL_EVP_CIPHER_block_size(wolfSSL_EVP_des_ede3_cbc()));
+    printf("block size des ede3 ecb = %d\n", 
+    wolfSSL_EVP_CIPHER_block_size(wolfSSL_EVP_des_ede3_ecb()));
+    \endcode
+    
+    \sa wolfSSL_EVP_CIPHER_CTX_init
+*/
+WOLFSSL_API const WOLFSSL_EVP_CIPHER* wolfSSL_EVP_des_ede3_ecb(void);
+/*!
+    \ingroup openSSL
+    
+    \brief Getter functions for the respective WOLFSSL_EVP_CIPHER pointers. 
+    wolfSSL_EVP_init() must be called once in the program first to populate 
+    these cipher strings. WOLFSSL_DES_ECB macro must be defined for 
+    wolfSSL_EVP_des_ecb().
+    
+    \return pointer Returns a WOLFSSL_EVP_CIPHER pointer for DES operations.
+    
+    \param none No parameters.
+    
+    _Example_
+    \code
+    WOLFSSL_EVP_CIPHER* cipher;
+    cipher = wolfSSL_EVP_des_cbc();
+    …
+    \endcode
+    
+    \sa wolfSSL_EVP_CIPHER_CTX_init
+*/
+WOLFSSL_API const WOLFSSL_EVP_CIPHER* wolfSSL_EVP_des_cbc(void);
+/*!
+    \ingroup openSSL
+    
+    \brief Function for initializing WOLFSSL_EVP_MD_CTX. This function is a 
+    wrapper for wolfSSL_EVP_DigestInit() because wolfSSL does not 
+    use WOLFSSL_ENGINE.
+    
+    \return SSL_SUCCESS If successfully set.
+    \return SSL_FAILURE If not successful.
+    
+    \param ctx structure to initialize.
+    \param type type of hash to do, for example SHA.
+    \param impl engine to use. N/A for wolfSSL, can be NULL.
+    
+    _Example_
+    \code
+    WOLFSSL_EVP_MD_CTX* md = NULL;
+    wolfCrypt_Init();
+    md = wolfSSL_EVP_MD_CTX_new();
+    if (md == NULL) {
+        printf("error setting md\n");
+        return -1;
+    }
+    printf("cipher md init ret = %d\n", wolfSSL_EVP_DigestInit_ex(md, 
+    wolfSSL_EVP_sha1(), e));  
+    //free resources
+    \endcode
+    
+    \sa wolfSSL_EVP_MD_CTX_new
+    \sa wolfCrypt_Init
+    \sa wolfSSL_EVP_MD_CTX_free
+*/
+WOLFSSL_API int wolfSSL_EVP_DigestInit_ex(WOLFSSL_EVP_MD_CTX* ctx,
+                                     const WOLFSSL_EVP_MD* type,
+                                     WOLFSSL_ENGINE *impl);
+/*!
+    \ingroup openSSL
+    
+    \brief Function for initializing WOLFSSL_EVP_CIPHER_CTX. This function is a 
+    wrapper for wolfSSL_CipherInit() because wolfSSL does not 
+    use WOLFSSL_ENGINE.
+    
+    \return SSL_SUCCESS If successfully set.
+    \return SSL_FAILURE If not successful.
+    
+    \param ctx structure to initialize.
+    \param type type of encryption/decryption to do, for example AES.
+    \param impl engine to use. N/A for wolfSSL, can be NULL.
+    \param key key to set .
+    \param iv iv if needed by algorithm.
+    \param enc encryption (1) or decryption (0) flag.
+    
+    _Example_
+    \code
+    WOLFSSL_EVP_CIPHER_CTX* ctx = NULL;
+    WOLFSSL_ENGINE* e = NULL;
+    unsigned char key[16];
+    unsigned char iv[12];
+    wolfCrypt_Init();
+    ctx = wolfSSL_EVP_CIPHER_CTX_new();
+    if (ctx == NULL) {
+        printf("issue creating ctx\n");
+        return -1;
+    }
+    
+    printf("cipher init ex error ret = %d\n", wolfSSL_EVP_CipherInit_ex(NULL, 
+    EVP_aes_128_    cbc(), e, key, iv, 1));
+    printf("cipher init ex success ret = %d\n", wolfSSL_EVP_CipherInit_ex(ctx, 
+    EVP_aes_128_c    bc(), e, key, iv, 1));
+    // free resources
+    \endcode
+    
+    \sa wolfSSL_EVP_CIPHER_CTX_new
+    \sa wolfCrypt_Init
+    \sa wolfSSL_EVP_CIPHER_CTX_free
+*/
+WOLFSSL_API int  wolfSSL_EVP_CipherInit_ex(WOLFSSL_EVP_CIPHER_CTX* ctx,
+                                    const WOLFSSL_EVP_CIPHER* type,
+                                    WOLFSSL_ENGINE *impl,
+                                    const unsigned char* key,
+                                    const unsigned char* iv,
+                                    int enc);
+/*!
+    \ingroup openSSL
+    
+    \brief Function for initializing WOLFSSL_EVP_CIPHER_CTX. This function is a 
+    wrapper for wolfSSL_EVP_CipherInit() because wolfSSL does not use 
+    WOLFSSL_ENGINE. Sets encrypt flag to be encrypt.
+    
+    \return SSL_SUCCESS If successfully set.
+    \return SSL_FAILURE If not successful.
+    
+    \param ctx structure to initialize.
+    \param type type of encryption to do, for example AES.
+    \param impl engine to use. N/A for wolfSSL, can be NULL.
+    \param key key to use.
+    \param iv iv to use.
+    
+    _Example_
+    \code
+    WOLFSSL_EVP_CIPHER_CTX* ctx = NULL;
+    wolfCrypt_Init();
+    ctx = wolfSSL_EVP_CIPHER_CTX_new();
+    if (ctx == NULL) {
+        printf("error setting ctx\n");
+        return -1;
+    }
+    printf("cipher ctx init ret = %d\n", wolfSSL_EVP_EncryptInit_ex(ctx, 
+    wolfSSL_EVP_aes_128_cbc(), e, key, iv));
+    //free resources
+    \endcode
+
+    \sa wolfSSL_EVP_CIPHER_CTX_new
+    \sa wolfCrypt_Init
+    \sa wolfSSL_EVP_CIPHER_CTX_free
+*/
+WOLFSSL_API int  wolfSSL_EVP_EncryptInit_ex(WOLFSSL_EVP_CIPHER_CTX* ctx,
+                                    const WOLFSSL_EVP_CIPHER* type,
+                                    WOLFSSL_ENGINE *impl,
+                                    const unsigned char* key,
+                                    const unsigned char* iv);
+/*!
+    \ingroup openSSL
+    
+    \brief Function for initializing WOLFSSL_EVP_CIPHER_CTX. This function is a 
+    wrapper for wolfSSL_EVP_CipherInit() because wolfSSL does not use 
+    WOLFSSL_ENGINE. Sets encrypt flag to be decrypt.
+    
+    \return SSL_SUCCESS If successfully set.
+    \return SSL_FAILURE If not successful.
+    
+    \param ctx structure to initialize.
+    \param type type of encryption/decryption to do, for example AES.
+    \param impl engine to use. N/A for wolfSSL, can be NULL.
+    \param key key to set .
+    \param iv iv if needed by algorithm.
+    \param enc encryption (1) or decryption (0) flag.
+    
+    _Example_
+    \code
+    WOLFSSL_EVP_CIPHER_CTX* ctx = NULL;
+    WOLFSSL_ENGINE* e = NULL;
+    unsigned char key[16];
+    unsigned char iv[12];
+
+    wolfCrypt_Init();
+
+    ctx = wolfSSL_EVP_CIPHER_CTX_new();
+    if (ctx == NULL) {
+        printf("issue creating ctx\n");
+        return -1;
+    }
+
+    printf("cipher init ex error ret = %d\n", wolfSSL_EVP_DecryptInit_ex(NULL, 
+    EVP_aes_128_    cbc(), e, key, iv, 1));
+    printf("cipher init ex success ret = %d\n", wolfSSL_EVP_DecryptInit_ex(ctx, 
+    EVP_aes_128_c    bc(), e, key, iv, 1));
+// free resources
+    \endcode
+    
+    \sa wolfSSL_EVP_CIPHER_CTX_new
+    \sa wolfCrypt_Init
+    \sa wolfSSL_EVP_CIPHER_CTX_free
+*/
+WOLFSSL_API int  wolfSSL_EVP_DecryptInit_ex(WOLFSSL_EVP_CIPHER_CTX* ctx,
+                                    const WOLFSSL_EVP_CIPHER* type,
+                                    WOLFSSL_ENGINE *impl,
+                                    const unsigned char* key,
+                                    const unsigned char* iv);
+/*!
+    \ingroup openSSL
+    
+    \brief Function for encrypting/decrypting data. In buffer is added to be 
+    encrypted or decrypted and out buffer holds the results. outl will be the 
+    length of encrypted/decrypted information.
+    
+    \return SSL_SUCCESS If successfull.
+    \return SSL_FAILURE If not successful.
+
+    \param ctx structure to get cipher type from.
+    \param out buffer to hold output.
+    \param outl adjusted to be size of output.
+    \param in buffer to perform operation on.
+    \param inl length of input buffer.
+    
+    _Example_
+    \code
+    WOLFSSL_EVP_CIPHER_CTX* ctx = NULL;
+    unsigned char out[100];
+    int outl;
+    unsigned char in[100];
+    int inl = 100;
+
+    ctx = wolfSSL_EVP_CIPHER_CTX_new();
+    // set up ctx
+    ret = wolfSSL_EVP_CipherUpdate(ctx, out, outl, in, inl);
+    // check ret value
+    // buffer out holds outl bytes of data
+    // free resources
+    \endcode
+    
+    \sa wolfSSL_EVP_CIPHER_CTX_new
+    \sa wolfCrypt_Init
+    \sa wolfSSL_EVP_CIPHER_CTX_free
+*/
+WOLFSSL_API int wolfSSL_EVP_CipherUpdate(WOLFSSL_EVP_CIPHER_CTX *ctx,
+                                   unsigned char *out, int *outl,
+                                   const unsigned char *in, int inl);
+/*!
+    \ingroup openSSL
+    
+    \brief This function performs the final cipher operations adding in 
+    padding. If WOLFSSL_EVP_CIPH_NO_PADDING flag is set in 
+    WOLFSSL_EVP_CIPHER_CTX structure then 1 is returned and no 
+    encryption/decryption is done. If padding flag is seti padding is added and 
+    encrypted when ctx is set to encrypt, padding values are checked when set 
+    to decrypt.
+    
+    \return 1 Returned on success.
+    \return 0 If encountering a failure.
+    
+    \param ctx structure to decrypt/encrypt with.
+    \param out buffer for final decrypt/encrypt.
+    \param out1 size of out buffer when data has been added by function.
+    
+    _Example_
+    \code
+    WOLFSSL_EVP_CIPHER_CTX* ctx;
+    int out1;
+    unsigned char out[64];
+    // create ctx
+    wolfSSL_EVP_CipherFinal(ctx, out, &out1);
+    \endcode
+    
+    \sa wolfSSL_EVP_CIPHER_CTX_new
+*/
+WOLFSSL_API int  wolfSSL_EVP_CipherFinal(WOLFSSL_EVP_CIPHER_CTX *ctx,
+                                   unsigned char *out, int *outl);
+/*!
+    \ingroup openSSL
+    
+    \brief Setter function for WOLFSSL_EVP_CIPHER_CTX structure key length.
+    
+    \return SSL_SUCCESS If successfully set.
+    \return SSL_FAILURE If failed to set key length.
+    
+    \param ctx structure to set key length.
+    \param keylen key length.
+    
+    _Example_
+    \code
+    WOLFSSL_EVP_CIPHER_CTX* ctx;
+    int keylen;
+    // create ctx
+    wolfSSL_EVP_CIPHER_CTX_set_key_length(ctx, keylen);
+    \endcode
+    
+    \sa wolfSSL_EVP_CIPHER_flags
+*/
+WOLFSSL_API int  wolfSSL_EVP_CIPHER_CTX_set_key_length(WOLFSSL_EVP_CIPHER_CTX* ctx,
+                                                     int keylen);
+/*!
+    \ingroup openSSL
+    
+    \brief This is a getter function for the ctx block size.
+    
+    \return size Returns ctx->block_size.
+    
+    \param ctx the cipher ctx to get block size of.
+    
+    _Example_
+    \code
+    const WOLFSSL_CVP_CIPHER_CTX* ctx;
+    //set up ctx
+    printf(“block size = %d\n”, wolfSSL_EVP_CIPHER_CTX_block_size(ctx));
+    \endcode
+    
+    \sa wolfSSL_EVP_CIPHER_block_size
+*/
+WOLFSSL_API int wolfSSL_EVP_CIPHER_CTX_block_size(const WOLFSSL_EVP_CIPHER_CTX *ctx);
+/*!
+    \ingroup openSSL
+    
+    \brief This is a getter function for the block size of cipher.
+    
+    \return size returns the block size.
+    
+    \param cipher cipher to get block size of.
+    
+    _Example_
+    \code
+    printf(“block size = %d\n”, 
+    wolfSSL_EVP_CIPHER_block_size(wolfSSL_EVP_aes_256_ecb()));
+    \endcode
+    
+    \sa wolfSSL_EVP_aes_256_ctr
+*/
+WOLFSSL_API int wolfSSL_EVP_CIPHER_block_size(const WOLFSSL_EVP_CIPHER *cipher);
+/*!
+    \ingroup openSSL
+    
+    \brief Setter function for WOLFSSL_EVP_CIPHER_CTX structure.
+    
+    \return none No returns.
+    
+    \param ctx structure to set flag.
+    \param flag flag to set in structure.
+    
+    _Example_
+    \code
+    WOLFSSL_EVP_CIPHER_CTX* ctx;
+    int flag;
+    // create ctx
+    wolfSSL_EVP_CIPHER_CTX_set_flags(ctx, flag);
+    \endcode
+    
+    \sa wolfSSL_EVP_CIPHER_flags
+*/
+WOLFSSL_API void wolfSSL_EVP_CIPHER_CTX_set_flags(WOLFSSL_EVP_CIPHER_CTX *ctx, int flags);
+/*!
+    \ingroup openSSL
+    
+    \brief Setter function for WOLFSSL_EVP_CIPHER_CTX structure to use padding.
+    
+    \return SSL_SUCCESS If successfully set.
+    \return BAD_FUNC_ARG If null argument passed in.
+    
+    \param ctx structure to set padding flag.
+    \param padding 0 for not setting padding, 1 for setting padding.
+    
+    _Example_
+    \code
+    WOLFSSL_EVP_CIPHER_CTX* ctx;
+    // create ctx
+    wolfSSL_EVP_CIPHER_CTX_set_padding(ctx, 1);
+    \endcode
+    
+    \sa wolfSSL_EVP_CIPHER_flags
+*/
+WOLFSSL_API int  wolfSSL_EVP_CIPHER_CTX_set_padding(WOLFSSL_EVP_CIPHER_CTX *c, int pad);

doc/dox_comments/header_files/hash.h

@@ -0,0 +1,235 @@
+/*!
+    \ingroup wolfCrypt
+    
+    \brief This function will return the OID for the wc_HashType provided.
+    
+    \return OID returns value greater than 0
+    \return HASH_TYPE_E hash type not supported.
+    \return BAD_FUNC_ARG one of the provided arguments is incorrect.
+    
+    \param hash_type A hash type from the “enum  wc_HashType” such 
+    as “WC_HASH_TYPE_SHA256”.
+    
+    _Example_
+    \code
+    enum wc_HashType hash_type = WC_HASH_TYPE_SHA256;
+    int oid = wc_HashGetOID(hash_type);
+    if (oid > 0) {
+    	// Success
+    }
+    \endcode
+    
+    \sa wc_HashGetDigestSize
+    \sa wc_Hash
+*/
+WOLFSSL_API int wc_HashGetOID(enum wc_HashType hash_type);
+/*!
+    \ingroup wolfCrypt
+    
+    \brief This function returns the size of the digest (output) for a 
+    hash_type. The returns size is used to make sure the output buffer 
+    provided to wc_Hash is large enough.
+    
+    \return Success A positive return value indicates the digest size 
+    for the hash.
+    \return Error Returns HASH_TYPE_E if hash_type is not supported. 
+    \return Failure Returns BAD_FUNC_ARG if an invalid hash_type was used.
+    
+    \param hash_type A hash type from the “enum  wc_HashType” such as 
+    “WC_HASH_TYPE_SHA256”.
+    
+    _Example_
+    \code
+    int hash_len = wc_HashGetDigestSize(hash_type);
+    if (hash_len <= 0) {
+    WOLFSSL_MSG("Invalid hash type/len");
+    return BAD_FUNC_ARG;
+    }
+    \endcode
+    
+    \sa wc_Hash
+*/
+WOLFSSL_API int wc_HashGetDigestSize(enum wc_HashType hash_type);
+/*!
+    \ingroup wolfCrypt
+    
+    \brief This function performs a hash on the provided data buffer 
+    and returns it in the hash buffer provided.
+    
+    \return 0 Success, else error (such as BAD_FUNC_ARG or BUFFER_E).
+    
+    \param hash_type A hash type from the “enum  wc_HashType” 
+    such as “WC_HASH_TYPE_SHA256”.
+    \param data Pointer to buffer containing the data to hash.
+    \param data_len Length of the data buffer.
+    \param hash Pointer to buffer used to output the final hash to.
+    \param hash_len Length of the hash buffer.
+    
+    _Example_
+    \code
+    enum wc_HashType hash_type = WC_HASH_TYPE_SHA256;
+    int hash_len = wc_HashGetDigestSize(hash_type);
+    if (hash_len > 0) {
+        int ret = wc_Hash(hash_type, data, data_len, hash_data, hash_len);
+        if(ret == 0) {
+		    // Success
+        }
+    }
+    \endcode
+    
+    \sa wc_HashGetDigestSize
+*/
+WOLFSSL_API int wc_Hash(enum wc_HashType hash_type,
+    const byte* data, word32 data_len,
+    byte* hash, word32 hash_len);
+/*!
+    \ingroup MD5
+    
+    \brief Convenience function, handles all the hashing and places the 
+    result into hash.
+    
+    \return 0 Returned upon successfully hashing the data.
+    \return Memory_E memory error, unable to allocate memory. This is only 
+    possible with the small stack option enabled.
+    
+    \param data the data to hash
+    \param len the length of data
+    \param hash Byte array to hold hash value.
+
+    _Example_
+    \code
+    const byte* data;
+    word32 data_len;
+    byte* hash;
+    int ret;
+    ... 
+    ret = wc_Md5Hash(data, data_len, hash);
+    if (ret != 0) {
+         // Md5 Hash Failure Case.
+    }
+    \endcode
+    
+    \sa wc_Md5Hash
+    \sa wc_Md5Final
+    \sa wc_InitMd5
+*/
+WOLFSSL_API int wc_Md5Hash(const byte* data, word32 len, byte* hash);
+/*!
+    \ingroup SHA
+    
+    \brief Convenience function, handles all the hashing and places the 
+    result into hash.
+    
+    \return 0 Returned upon successfully ….
+    \return Memory_E memory error, unable to allocate memory. This is only 
+    possible with the small stack option enabled.
+    
+    \param data the data to hash
+    \param len the length of data
+    \param hash Byte array to hold hash value.
+    
+    _Example_
+    \code
+    none
+    \endcode
+    
+    \sa wc_ShaHash
+    \sa wc_ShaFinal
+    \sa wc_InitSha
+*/
+WOLFSSL_API int wc_ShaHash(const byte*, word32, byte*);
+/*!
+    \ingroup SHA
+    
+    \brief Convenience function, handles all the hashing and places the 
+    result into hash.
+    
+    \return 0 Returned upon successfully …
+    \return Memory_E memory error, unable to allocate memory. This is only 
+    possible with the small stack option enabled.
+    
+    \param data the data to hash
+    \param len the length of data
+    \param hash Byte array to hold hash value.
+    
+    _Example_
+    \code
+    none
+    \endcode
+    
+    \sa wc_Sha256Hash
+    \sa wc_Sha256Final
+    \sa wc_InitSha256
+*/
+WOLFSSL_API int wc_Sha256Hash(const byte*, word32, byte*);
+/*!
+    \ingroup SHA
+    
+    \brief Convenience function, handles all the hashing and places the 
+    result into hash.
+    
+    \return 0 Success
+    \return <0 Error
+    
+    \param data the data to hash
+    \param len the length of data
+    \param hash Byte array to hold hash value.
+    
+    _Example_
+    \code
+    none
+    \endcode
+    
+    \sa wc_InitSha224
+    \sa wc_Sha224Update
+    \sa wc_Sha224Final
+*/
+        WOLFSSL_API int wc_Sha224Hash(const byte*, word32, byte*);
+/*!
+    \ingroup SHA
+    
+    \brief Convenience function, handles all the hashing and places the 
+    result into hash.
+    
+    \return 0 Returned upon successfully hashing the inputted data
+    \return Memory_E memory error, unable to allocate memory. This is only 
+    possible with the small stack option enabled.
+    
+    \param data the data to hash
+    \param len the length of data
+    \param hash Byte array to hold hash value.
+
+    _Example_
+    \code
+    none
+    \endcode
+    
+    \sa wc_Sha512Hash
+    \sa wc_Sha512Final
+    \sa wc_InitSha512
+*/
+WOLFSSL_API int wc_Sha512Hash(const byte*, word32, byte*);
+/*!
+    \ingroup SHA
+    
+    \brief Convenience function, handles all the hashing and places the 
+    result into hash.
+    
+    \return 0 Returned upon successfully hashing the data
+    \return Memory_E memory error, unable to allocate memory. This is only 
+    possible with the small stack option enabled.
+
+    \param data the data to hash
+    \param len the length of data
+    \param hash Byte array to hold hash value.
+    
+    _Example_
+    \code
+    none
+    \endcode
+
+    \sa wc_Sha384Hash
+    \sa wc_Sha384Final
+    \sa wc_InitSha384
+*/
+        WOLFSSL_API int wc_Sha384Hash(const byte*, word32, byte*);

doc/dox_comments/header_files/hc128.h

@@ -0,0 +1,65 @@
+/*!
+    \ingroup HC128
+    
+    \brief This function encrypts or decrypts a message of any size from the 
+    input buffer input, and stores the resulting plaintext/ciphertext in 
+    the output buffer output.
+    
+    \return 0 Returned upon successfully encrypting/decrypting the given input
+    \return MEMORY_E Returned if the input and output buffers are not aligned 
+    along a 4-byte boundary, and there is an error allocating memory
+    \return BAD_ALIGN_E Returned if the input or output buffers are not 
+    aligned along a 4-byte boundary, and NO_WOLFSSL_ALLOC_ALIGN is defined
+    
+    \param ctx pointer to a HC-128 context object with an initialized key 
+    to use for encryption or decryption
+    \param output buffer in which to store the processed input
+    \param input  buffer containing the plaintext to encrypt or the 
+    ciphertext to decrypt
+    \param msglen length of the plaintext to encrypt or the ciphertext 
+    to decrypt
+    
+    _Example_
+    \code
+    HC128 enc;
+    byte key[] = { // initialize with key };
+    byte iv[]  = { // initialize with iv };
+    wc_Hc128_SetKey(&enc, key, iv);
+
+    byte msg[] = { // initialize with message };
+    byte cipher[sizeof(msg)];
+
+    if (wc_Hc128_Process(*enc, cipher, plain, sizeof(plain)) != 0) {
+    	// error encrypting msg
+    }
+    \endcode
+    
+    \sa wc_Hc128_SetKey
+*/
+WOLFSSL_API int wc_Hc128_Process(HC128*, byte*, const byte*, word32);
+/*!
+    \ingroup HC128
+    
+    \brief This function initializes an HC128 context object by 
+    setting its key and iv.
+    
+    \return 0 Returned upon successfully setting the key and iv 
+    for the HC128 context object
+    
+    \param ctx pointer to an HC-128 context object to initialize
+    \param key pointer to the buffer containing the 16 byte key to 
+    use with encryption/decryption
+    \param iv pointer to the buffer containing the 16 byte iv (nonce) 
+    with which to initialize the HC128 object
+    
+    _Example_
+    \code
+    HC128 enc;
+    byte key[] = { // initialize with key };
+    byte iv[]  = { // initialize with iv };
+    wc_Hc128_SetKey(&enc, key, iv);
+    \endcode
+    
+    \sa wc_Hc128_Process
+*/
+WOLFSSL_API int wc_Hc128_SetKey(HC128*, const byte* key, const byte* iv);

doc/dox_comments/header_files/hmac.h

@@ -0,0 +1,168 @@
+/*!
+    \ingroup HMAC
+    
+    \brief This function initializes an Hmac object, setting its 
+    encryption type, key and HMAC length.
+    
+    \return 0 Returned on successfully initializing the Hmac object
+    \return BAD_FUNC_ARG Returned if the input type is invalid. Valid options 
+    are: MD5, SHA, SHA256, SHA384, SHA512, BLAKE2B_ID
+    \return MEMORY_E Returned if there is an error allocating memory for the 
+    structure to use for hashing
+    \return HMAC_MIN_KEYLEN_E May be returned when using a FIPS implementation 
+    and the key length specified is shorter than the minimum acceptable 
+    FIPS standard
+    
+    \param hmac pointer to the Hmac object to initialize
+    \param type type specifying which encryption method the Hmac object 
+    should use. Valid options are: MD5, SHA, SHA256, SHA384, SHA512, BLAKE2B_ID
+    \param key pointer to a buffer containing the key with which to 
+    initialize the Hmac object
+    \param length length of the key
+    
+    _Example_
+    \code
+    Hmac hmac;
+    byte key[] = { // initialize with key to use for encryption };
+    if (wc_HmacSetKey(&hmac, MD5, key, sizeof(key)) != 0) {
+    	// error initializing Hmac object
+    }
+    \endcode
+    
+    \sa wc_HmacUpdate
+    \sa wc_HmacFinal
+*/
+WOLFSSL_API int wc_HmacSetKey(Hmac*, int type, const byte* key, word32 keySz);
+/*!
+    \ingroup HMAC
+    
+    \brief This function updates the message to authenticate using HMAC. 
+    It should be called after the Hmac object has been initialized with 
+    wc_HmacSetKey. This function may be called multiple times to update 
+    the message to hash. After calling wc_HmacUpdate as desired, one should 
+    call wc_HmacFinal to obtain the final authenticated message tag. 
+    
+    \return 0 Returned on successfully updating the message to authenticate
+    \return MEMORY_E Returned if there is an error allocating memory for 
+    use with a hashing algorithm
+    
+    \param hmac pointer to the Hmac object for which to update the message
+    \param msg pointer to the buffer containing the message to append
+    \param length length of the message to append
+    
+    _Example_
+    \code
+    Hmac hmac;
+    byte msg[] = { // initialize with message to authenticate };
+    byte msg2[] = { // initialize with second half of message };
+    // initialize hmac
+    if( wc_HmacUpdate(&hmac, msg, sizeof(msg)) != 0) {
+    	// error updating message
+    }
+    if( wc_HmacUpdate(&hmac, msg2, sizeof(msg)) != 0) {
+    	// error updating with second message
+    }
+    \endcode
+    
+    \sa wc_HmacSetKey
+    \sa wc_HmacFinal
+*/
+WOLFSSL_API int wc_HmacUpdate(Hmac*, const byte*, word32);
+/*!
+    \ingroup HMAC
+    
+    \brief This function computes the final hash of an Hmac object's message.
+    
+    \return 0 Returned on successfully computing the final hash
+    \return MEMORY_E Returned if there is an error allocating memory for 
+    use with a hashing algorithm
+    
+    \param hmac pointer to the Hmac object for which to calculate the 
+    final hash
+    \param hash pointer to the buffer in which to store the final hash. 
+    Should have room available as required by the hashing algorithm chosen
+    
+    _Example_
+    \code
+    Hmac hmac;
+    byte hash[MD5_DIGEST_SIZE];
+    // initialize hmac with MD5 as type
+    // wc_HmacUpdate() with messages
+
+    if (wc_HmacFinal(&hmac, hash) != 0) {
+    	// error computing hash
+    }
+    \endcode
+    
+    \sa wc_HmacSetKey
+    \sa wc_HmacUpdate
+*/
+WOLFSSL_API int wc_HmacFinal(Hmac*, byte*);
+/*!
+    \ingroup HMAC
+    
+    \brief This function returns the largest HMAC digest size available 
+    based on the configured cipher suites.
+    
+    \return Success Returns the largest HMAC digest size available based 
+    on the configured cipher suites
+    
+    \param none No parameters.
+    
+    _Example_
+    \code
+    int maxDigestSz = wolfSSL_GetHmacMaxSize();
+    \endcode
+    
+    \sa none
+*/
+WOLFSSL_API int wolfSSL_GetHmacMaxSize(void);
+/*!
+    \ingroup HMAC
+    
+    \brief This function provides access to a HMAC Key Derivation Function 
+    (HKDF). It utilizes HMAC to convert inKey, with an optional salt and 
+    optional info into a derived key, which it stores in out. The hash type 
+    defaults to MD5 if 0 or NULL is given.
+    
+    \return 0 Returned upon successfully generating a key with the given inputs
+    \return BAD_FUNC_ARG Returned if an invalid hash type is given as 
+    argument. Valid types are: MD5, SHA, SHA256, SHA384, SHA512, BLAKE2B_ID
+    \return MEMORY_E Returned if there is an error allocating memory
+    \return HMAC_MIN_KEYLEN_E May be returned when using a FIPS implementation 
+    and the key length specified is shorter than the minimum acceptable FIPS 
+    standard
+    
+    \param type hash type to use for the HKDF.  Valid types are: MD5, SHA, 
+    SHA256, SHA384, SHA512, BLAKE2B_ID
+    \param inKey pointer to the buffer containing the key to use for KDF
+    \param inKeySz length of the input key
+    \param salt pointer to a buffer containing an optional salt. Use NULL 
+    instead if not using a salt
+    \param saltSz length of the salt. Use 0 if not using a salt
+    \param info pointer to a buffer containing optional additional info. 
+    Use NULL if not appending extra info
+    \param infoSz length of additional info. Use 0 if not using additional info
+    \param out pointer to the buffer in which to store the derived key
+    \param outSz space available in the output buffer to store the 
+    generated key
+    
+    _Example_
+    \code
+    byte key[] = { // initialize with key };
+    byte salt[] = { // initialize with salt };
+    byte derivedKey[MAX_DIGEST_SIZE];
+
+    int ret = wc_HKDF(SHA512, key, sizeof(key), salt, sizeof(salt),
+    NULL, 0, derivedKey, sizeof(derivedKey));
+    if ( ret != 0 ) {
+	    // error generating derived key
+    }
+    \endcode
+    
+    \sa wc_HmacSetKey
+*/
+WOLFSSL_API int wc_HKDF(int type, const byte* inKey, word32 inKeySz,
+                    const byte* salt, word32 saltSz,
+                    const byte* info, word32 infoSz,
+                    byte* out, word32 outSz);

doc/dox_comments/header_files/idea.h

@@ -0,0 +1,159 @@
+/*!
+    \ingroup IDEA
+    
+    \brief Generate the 52, 16-bit key sub-blocks from the 128 key.
+    
+    \return 0 Success
+    \return BAD_FUNC_ARG Returns if idea or key is null, keySz is not equal to 
+    IDEA_KEY_SIZE, or dir is not IDEA_ENCRYPTION or IDEA_DECRYPTION.
+    
+    \param idea Pointer to Idea structure.
+    \param key Pointer to key in memory.
+    \param keySz Size of key.
+    \param iv Value for IV in Idea structure.  Can be null.
+    \param dir Direction, either IDEA_ENCRYPTION or IDEA_DECRYPTION
+
+    _Example_
+    \code
+    byte v_key[IDEA_KEY_SIZE] = { }; // Some Key
+    Idea idea;
+    int ret = wc_IdeaSetKey(&idea v_key, IDEA_KEY_SIZE, NULL, IDEA_ENCRYPTION);
+    if (ret != 0)
+    {
+        // There was an error
+    }
+    \endcode
+    
+    \sa wc_IdeaSetIV
+*/
+WOLFSSL_API int wc_IdeaSetKey(Idea *idea, const byte* key, word16 keySz,
+                              const byte *iv, int dir);
+/*!
+    \ingroup IDEA
+    
+    \brief Sets the IV in an Idea key structure.
+
+    \return 0 Success
+    \return BAD_FUNC_ARG Returns if idea is null.
+
+    \param idea Pointer to idea key structure.
+    \param iv The IV value to set, can be null.
+    
+    _Example_
+    \code
+    Idea idea;
+    // Initialize idea
+
+    byte iv[] = { }; // Some IV
+    int ret = wc_IdeaSetIV(&idea, iv);
+    if(ret != 0)
+    {
+        // Some error occured
+    }
+    \endcode
+    
+    \sa wc_IdeaSetKey
+*/
+WOLFSSL_API int wc_IdeaSetIV(Idea *idea, const byte* iv);
+/*!
+    \ingroup IDEA
+    
+    \brief Encryption or decryption for a block (64 bits).
+    
+    \return 0 upon success.
+    \return <0 an error occured
+    
+    \param idea Pointer to idea key structure.
+    \param out Pointer to destination.
+    \param in Pointer to input data to encrypt or decrypt.
+
+    _Example_
+    \code
+    byte v_key[IDEA_KEY_SIZE] = { }; // Some Key
+    byte data[IDEA_BLOCK_SIZE] = { }; // Some encrypted data
+    Idea idea;
+    wc_IdeaSetKey(&idea, v_key, IDEA_KEY_SIZE, NULL, IDEA_DECRYPTION);
+    int ret = wc_IdeaCipher(&idea, data, data);
+
+    if (ret != 0)
+    {
+        // There was an error
+    }
+    \endcode
+    
+    \sa wc_IdeaSetKey
+    \sa wc_IdeaSetIV
+    \sa wc_IdeaCbcEncrypt
+    \sa wc_IdeaCbcDecrypt
+*/
+WOLFSSL_API int wc_IdeaCipher(Idea *idea, byte* out, const byte* in);
+/*!
+    \ingroup IDEA
+    
+    \brief Encrypt data using IDEA CBC mode.
+    
+    \return 0 Success
+    \return BAD_FUNC_ARG Returns if any arguments are null.
+
+    \param idea Pointer to Idea key structure.
+    \param out Pointer to destination for encryption.
+    \param in Pointer to input for encryption.
+    \param len length of input.
+    
+    _Example_
+    \code
+    Idea idea;
+    // Initialize idea structure for encryption
+    const char *message = "International Data Encryption Algorithm";
+    byte msg_enc[40], msg_dec[40];
+
+    memset(msg_enc, 0, sizeof(msg_enc));
+    ret = wc_IdeaCbcEncrypt(&idea, msg_enc, (byte *)message,
+                                (word32)strlen(message)+1);
+    if(ret != 0)
+    {
+        // Some error occured
+    }
+    \endcode
+    
+    \sa wc_IdeaCbcDecrypt
+    \sa wc_IdeaCipher
+    \sa wc_IdeaSetKey
+*/
+WOLFSSL_API int wc_IdeaCbcEncrypt(Idea *idea, byte* out,
+                                  const byte* in, word32 len);
+/*!
+    \ingroup IDEA
+    
+    \brief Decrypt data using IDEA CBC mode.
+
+    \return 0 Success
+    \return BAD_FUNC_ARG Returns if any arguments are null.
+    
+    \param idea Pointer to Idea key structure.
+    \param out Pointer to destination for encryption.
+    \param in Pointer to input for encryption.
+    \param len length of input.
+    
+    _Example_
+    \code
+    Idea idea;
+    // Initialize idea structure for decryption
+    const char *message = "International Data Encryption Algorithm";
+    byte msg_enc[40], msg_dec[40];
+
+    memset(msg_dec, 0, sizeof(msg_dec));
+    ret = wc_IdeaCbcDecrypt(&idea, msg_dec, msg_enc,
+                                (word32)strlen(message)+1);
+    if(ret != 0)
+    {
+        // Some error occured
+    }
+    \endcode
+    
+    \sa wc_IdeaCbcEncrypt
+    \sa wc_IdeaCipher
+    \sa wc_IdeaSetKey
+*/
+WOLFSSL_API int wc_IdeaCbcDecrypt(Idea *idea, byte* out,
+                                  const byte* in, word32 len);

doc/dox_comments/header_files/logging.h

@@ -0,0 +1,76 @@
+/*!
+    \ingroup Logging
+    
+    \brief This function registers a logging callback that will be used to 
+    handle the wolfSSL log message. By default, if the system supports it 
+    fprintf() to stderr is used but by using this function anything 
+    can be done by the user.
+    
+    \return Success If successful this function will return 0.
+    \return BAD_FUNC_ARG is the error that will be returned if a function 
+    pointer is not provided.
+    
+    \param log_function function to register as a logging callback. 
+    Function signature must follow the above prototype.
+    
+    _Example_
+    \code
+    int ret = 0;
+    // Logging callback prototype
+    void MyLoggingCallback(const int logLevel, const char* const logMessage);
+    // Register the custom logging callback with wolfSSL
+    ret = wolfSSL_SetLoggingCb(MyLoggingCallback);
+    if (ret != 0) {
+	    // failed to set logging callback
+    }
+    void MyLoggingCallback(const int logLevel, const char* const logMessage)
+    {
+	// custom logging function
+    }
+    \endcode
+    
+    \sa wolfSSL_Debugging_ON
+    \sa wolfSSL_Debugging_OFF
+*/
+WOLFSSL_API int wolfSSL_SetLoggingCb(wolfSSL_Logging_cb log_function);
+/*!
+    \ingroup Debug
+
+    \brief If logging has been enabled at build time this function turns on 
+    logging at runtime.  To enable logging at build time use --enable-debug 
+    or define DEBUG_WOLFSSL.
+    
+    \return 0 upon success.
+    \return NOT_COMPILED_IN is the error that will be returned if logging 
+    isn’t enabled for this build.
+    
+    \param none No parameters.
+    
+    _Example_
+    \code
+    wolfSSL_Debugging_ON();
+    \endcode
+    
+    \sa wolfSSL_Debugging_OFF
+    \sa wolfSSL_SetLoggingCb
+*/
+WOLFSSL_API int  wolfSSL_Debugging_ON(void);
+/*!
+    \ingroup Debug
+
+    \brief This function turns off runtime logging messages.  If they’re 
+    already off, no action is taken.
+    
+    \return none No returns.
+    
+    \param none No parameters.
+    
+    _Example_
+    \code
+    wolfSSL_Debugging_OFF();
+    \endcode
+    
+    \sa wolfSSL_Debugging_ON
+    \sa wolfSSL_SetLoggingCb
+*/
+WOLFSSL_API void wolfSSL_Debugging_OFF(void);

doc/dox_comments/header_files/md2.h

@@ -0,0 +1,113 @@
+/*!
+    \ingroup MD2
+    
+    \brief This function initializes md2. This is automatically 
+    called by wc_Md2Hash.
+    
+    \return 0 Returned upon successfully initializing
+    
+    \param md2 pointer to the md2 structure to use for encryption
+    
+    _Example_
+    \code
+    md2 md2[1];
+    if ((ret = wc_InitMd2(md2)) != 0) {
+       WOLFSSL_MSG("wc_Initmd2 failed");
+    }
+    else {
+       wc_Md2Update(md2, data, len);
+       wc_Md2Final(md2, hash);
+    }
+    \endcode
+    
+    \sa wc_Md2Hash
+    \sa wc_Md2Update
+    \sa wc_Md2Final
+*/
+WOLFSSL_API void wc_InitMd2(Md2*);
+/*!
+    \ingroup MD2
+    
+    \brief Can be called to continually hash the provided byte 
+    array of length len.
+    
+    \return 0 Returned upon successfully adding the data to the digest.
+    
+    \param md2 pointer to the md2 structure to use for encryption
+    \param data the data to be hashed
+    \param len length of data to be hashed
+
+    _Example_
+    \code
+    md2 md2[1];
+    byte data[] = { }; // Data to be hashed
+    word32 len = sizeof(data);
+
+    if ((ret = wc_InitMd2(md2)) != 0) {
+       WOLFSSL_MSG("wc_Initmd2 failed");
+    }
+    else {
+       wc_Md2Update(md2, data, len);
+       wc_Md2Final(md2, hash);
+    }
+    \endcode
+    
+    \sa wc_Md2Hash
+    \sa wc_Md2Final
+    \sa wc_InitMd2
+*/
+WOLFSSL_API void wc_Md2Update(Md2*, const byte*, word32);
+/*!
+    \ingroup MD2
+    
+    \brief Finalizes hashing of data. Result is placed into hash.
+    
+    \return 0 Returned upon successfully finalizing.
+
+    \param md2 pointer to the md2 structure to use for encryption
+    \param hash Byte array to hold hash value.
+
+    _Example_
+    \code
+    md2 md2[1];
+    byte data[] = { }; // Data to be hashed
+    word32 len = sizeof(data);
+
+    if ((ret = wc_InitMd2(md2)) != 0) {
+       WOLFSSL_MSG("wc_Initmd2 failed");
+    }
+    else {
+       wc_Md2Update(md2, data, len);
+       wc_Md2Final(md2, hash);
+    }
+    \endcode
+    
+    \sa wc_Md2Hash
+    \sa wc_Md2Final
+    \sa wc_InitMd2
+*/
+WOLFSSL_API void wc_Md2Final(Md2*, byte*);
+/*!
+    \ingroup MD2
+    
+    \brief Convenience function, handles all the hashing and places 
+    the result into hash.
+    
+    \return 0 Returned upon successfully hashing the data.
+    \return Memory_E memory error, unable to allocate memory. This is only 
+    possible with the small stack option enabled.
+    
+    \param data the data to hash
+    \param len the length of data
+    \param hash Byte array to hold hash value.
+
+    _Example_
+    \code
+    none
+    \endcode
+    
+    \sa wc_Md2Hash
+    \sa wc_Md2Final
+    \sa wc_InitMd2
+*/
+WOLFSSL_API int  wc_Md2Hash(const byte*, word32, byte*);

doc/dox_comments/header_files/md4.h

@@ -0,0 +1,86 @@
+/*!
+    \ingroup MD4
+    
+    \brief This function initializes md4. This is automatically 
+    called by wc_Md4Hash.
+    
+    \return 0 Returned upon successfully initializing
+    
+    \param md4 pointer to the md4 structure to use for encryption
+    
+    _Example_
+    \code
+    md4 md4[1];
+    if ((ret = wc_InitMd4(md4)) != 0) {
+       WOLFSSL_MSG("wc_Initmd4 failed");
+    }
+    else {
+       wc_Md4Update(md4, data, len);
+       wc_Md4Final(md4, hash);
+    }
+    \endcode
+    
+    \sa wc_Md4Hash
+    \sa wc_Md4Update
+    \sa wc_Md4Final
+*/
+WOLFSSL_API void wc_InitMd4(Md4*);
+/*!
+    \ingroup MD4
+    
+    \brief Can be called to continually hash the provided byte array 
+    of length len.
+    
+    \return 0 Returned upon successfully adding the data to the digest.
+    
+    \param md4 pointer to the md4 structure to use for encryption
+    \param data the data to be hashed
+    \param len length of data to be hashed
+    
+    _Example_
+    \code
+    md4 md4[1];
+    byte data[] = { }; // Data to be hashed
+    word32 len = sizeof(data);
+
+    if ((ret = wc_InitMd4(md4)) != 0) {
+       WOLFSSL_MSG("wc_Initmd4 failed");
+    }
+    else {
+       wc_Md4Update(md4, data, len);
+       wc_Md4Final(md4, hash);
+    }
+    \endcode
+
+    \sa wc_Md4Hash
+    \sa wc_Md4Final
+    \sa wc_InitMd4
+*/
+WOLFSSL_API void wc_Md4Update(Md4*, const byte*, word32);
+/*!
+    \ingroup MD4
+    
+    \brief Finalizes hashing of data. Result is placed into hash.
+    
+    \return 0 Returned upon successfully finalizing.
+    
+    \param md4 pointer to the md4 structure to use for encryption
+    \param hash Byte array to hold hash value.
+
+    _Example_
+    \code
+    md4 md4[1];
+    if ((ret = wc_InitMd4(md4)) != 0) {
+        WOLFSSL_MSG("wc_Initmd4 failed");
+    }
+    else {
+        wc_Md4Update(md4, data, len);
+        wc_Md4Final(md4, hash);
+    }
+    \endcode
+
+    \sa wc_Md4Hash
+    \sa wc_Md4Final
+    \sa wc_InitMd4
+*/
+WOLFSSL_API void wc_Md4Final(Md4*, byte*);

doc/dox_comments/header_files/md5.h

@@ -0,0 +1,176 @@
+/*!
+    \ingroup MD5
+    
+    \brief This function initializes md5. This is automatically 
+    called by wc_Md5Hash.
+    
+    \return 0 Returned upon successfully initializing.
+    \return BAD_FUNC_ARG Returned if the Md5 structure is passed 
+    as a NULL value.
+    
+    \param md5 pointer to the md5 structure to use for encryption
+    
+    _Example_
+    \code
+    Md5 md5;
+    byte* hash;
+    if ((ret = wc_InitMd5(&md5)) != 0) {
+       WOLFSSL_MSG("wc_Initmd5 failed");
+    }
+    else {
+       ret = wc_Md5Update(&md5, data, len);
+       if (ret != 0) {
+    	 // Md5 Update Failure Case.
+       }
+       ret = wc_Md5Final(&md5, hash);
+      if (ret != 0) {
+    	// Md5 Final Failure Case.
+      }
+    }
+    \endcode
+    
+    \sa wc_Md5Hash
+    \sa wc_Md5Update
+    \sa wc_Md5Final
+*/
+WOLFSSL_API int wc_InitMd5(wc_Md5*);
+/*!
+    \ingroup MD5
+    
+    \brief Can be called to continually hash the provided byte array of 
+    length len.
+    
+    \return 0 Returned upon successfully adding the data to the digest.
+    \return BAD_FUNC_ARG Returned if the Md5 structure is NULL or if 
+    data is NULL and len is greater than zero. The function should 
+    not return an error if the data parameter is NULL and len is zero.
+
+    \param md5 pointer to the md5 structure to use for encryption
+    \param data the data to be hashed
+    \param len length of data to be hashed
+    
+    _Example_
+    \code
+    Md5 md5;
+    byte data[] = { Data to be hashed };
+    word32 len = sizeof(data);
+
+    if ((ret = wc_InitMd5(&md5)) != 0) {
+       WOLFSSL_MSG("wc_Initmd5 failed");
+    }
+    else {
+       ret = wc_Md5Update(&md5, data, len);
+       if (ret != 0) {
+    	 // Md5 Update Error Case.
+       }
+       ret = wc_Md5Final(&md5, hash);
+       if (ret != 0) {
+    	// Md5 Final Error Case.
+       }
+    }
+    \endcode
+    
+    \sa wc_Md5Hash
+    \sa wc_Md5Final
+    \sa wc_InitMd5
+*/
+WOLFSSL_API int wc_Md5Update(wc_Md5*, const byte*, word32);
+/*!
+    \ingroup MD5
+    
+    \brief Finalizes hashing of data. Result is placed into hash. Md5 
+    Struct is reset. Note: This function will also return the result 
+    of calling IntelQaSymMd5() in the case that HAVE_INTEL_QA is defined.
+    
+    \return 0 Returned upon successfully finalizing.
+    \return BAD_FUNC_ARG Returned if the Md5 structure or hash pointer 
+    is passed in NULL.
+    
+    \param md5 pointer to the md5 structure to use for encryption
+    \param hash Byte array to hold hash value.
+    
+    _Example_
+    \code
+    md5 md5[1];
+    byte data[] = { Data to be hashed };
+    word32 len = sizeof(data);
+
+    if ((ret = wc_InitMd5(md5)) != 0) {
+       WOLFSSL_MSG("wc_Initmd5 failed");
+    }
+    else {
+       ret = wc_Md5Update(md5, data, len);
+       if (ret != 0) {
+    	// Md5 Update Failure Case.
+       }
+      ret = wc_Md5Final(md5, hash);
+       if (ret != 0) {
+	    // Md5 Final Failure Case.
+       }
+    }
+    \endcode
+    
+    \sa wc_Md5Hash
+    \sa wc_InitMd5
+    \sa wc_Md5GetHash
+*/
+WOLFSSL_API int wc_Md5Final(wc_Md5*, byte*);
+/*!
+    \ingroup MD5
+    
+    \brief Resets the Md5 structure.  Note: this is only supported if 
+    you have WOLFSSL_TI_HASH defined.
+
+    \return none No returns.
+    
+    \param md5 Pointer to the Md5 structure to be reset.
+
+    _Example_
+    \code
+    Md5 md5;
+    byte data[] = { Data to be hashed };
+    word32 len = sizeof(data);
+
+    if ((ret = wc_InitMd5(&md5)) != 0) {
+        WOLFSSL_MSG("wc_InitMd5 failed");
+    }
+    else {
+        wc_Md5Update(&md5, data, len);
+        wc_Md5Final(&md5, hash);
+        wc_Md5Free(&md5);
+    }
+    \endcode
+    
+    \sa wc_InitMd5
+    \sa wc_Md5Update
+    \sa wc_Md5Final
+*/
+WOLFSSL_API void wc_Md5Free(wc_Md5*);
+/*!
+    \ingroup MD5
+    
+    \brief Gets hash data. Result is placed into hash.  Md5 struct 
+    is not reset.
+    
+    \return none No returns
+    
+    \param md5 pointer to the md5 structure to use for encryption.
+    \param hash Byte array to hold hash value.
+    
+    _Example_
+    \code
+    md5 md5[1];
+    if ((ret = wc_InitMd5(md5)) != 0) {
+       WOLFSSL_MSG("wc_Initmd5 failed");
+    }
+    else {
+       wc_Md5Update(md5, data, len);
+       wc_Md5GetHash(md5, hash);
+    }
+    \endcode
+    
+    \sa wc_Md5Hash
+    \sa wc_Md5Final
+    \sa wc_InitMd5
+*/
+WOLFSSL_API int  wc_Md5GetHash(wc_Md5*, byte*);

doc/dox_comments/header_files/memory.h

@@ -0,0 +1,292 @@
+/*!
+    \ingroup Memory
+    
+    \brief This function calls the custom malloc function, if one has been 
+    defined, or simply calls the default C malloc function if no custom 
+    function exists. It is not called directly by wolfSSL, but instead 
+    generally called by using XMALLOC, which may be replaced by 
+    wolfSSL_Malloc during preprocessing.
+    
+    \return Success On successfully allocating the desired memory, 
+    returns a void* to that location
+    \return NULL Returned when there is a failure to allocate memory
+    
+    \param size size, in bytes, of the memory to allocate
+    
+    _Example_
+    \code
+    int* tenInts = (int*)wolfSSL_Malloc(sizeof(int)*10);
+    \endcode
+    
+    \sa wolfSSL_Free
+    \sa wolfSSL_Realloc
+    \sa XMALLOC
+    \sa XFREE
+    \sa XREALLOC
+*/
+WOLFSSL_API void* wolfSSL_Malloc(size_t size, void* heap, int type, const char* func, unsigned int line);
+/*!
+    \ingroup Memory
+    
+    \brief This function calls a custom free function, if one has been 
+    defined, or simply calls the default C free function if no custom 
+    function exists. It is not called directly by wolfSSL, but instead 
+    generally called by using XFREE, which may be replaced by wolfSSL_Free 
+    during preprocessing.
+    
+    \return none No returns.
+    
+    \param ptr pointer to the memory to free
+    
+    _Example_
+    \code
+    int* tenInts = (int*)wolfSSL_Malloc(sizeof(int)*10);
+    // process data as desired
+    ...
+    if(tenInts) {
+    	wolfSSL_Free(tenInts);
+    }
+    \endcode
+
+    \sa wolfSSL_Malloc
+    \sa wolfSSL_Realloc
+    \sa XMALLOC
+    \sa XFREE
+    \sa XREALLOC
+*/
+WOLFSSL_API void  wolfSSL_Free(void *ptr, void* heap, int type, const char* func, unsigned int line);
+/*!
+    \ingroup Memory
+    
+    \brief This function calls a custom realloc function, if one has been 
+    defined, or simply calls the default C realloc function if no custom 
+    function exists. It is not called directly by wolfSSL, but instead 
+    generally called by using XREALLOC, which may be replaced by 
+    wolfSSL_Realloc during preprocessing.
+    
+    \return Success On successfully reallocating the desired memory, 
+    returns a void* to that location
+    \return NULL Returned when there is a failure to reallocate memory
+    
+    \param ptr pointer to the memory to the memory to reallocate
+    \param size desired size after reallocation
+
+    _Example_
+    \code
+    int* tenInts = (int*)wolfSSL_Malloc(sizeof(int)*10);
+    int* twentyInts = (int*)realloc(tenInts, sizeof(tenInts)*2);
+    \endcode
+    
+    \sa wolfSSL_Malloc
+    \sa wolfSSL_Free
+    \sa XMALLOC
+    \sa XFREE
+    \sa XREALLOC
+*/
+WOLFSSL_API void* wolfSSL_Realloc(void *ptr, size_t size, void* heap, int type, const char* func, unsigned int line);
+/*!
+    \ingroup Memory
+    
+    \brief This function is similar to malloc(), but calls the memory 
+    allocation function which wolfSSL has been configured to use. By default, 
+    wolfSSL uses malloc().  This can be changed using the wolfSSL memory 
+    abstraction layer - see wolfSSL_SetAllocators().
+    
+    \return pointer If successful, this function returns a pointer to 
+    allocated memory.
+    \return error If there is an error, NULL will be returned.
+    \return other Specific return values may be dependent on the underlying 
+    memory allocation function being used (if not using the default malloc()).
+    
+    \param size number of bytes to allocate.
+    
+    _Example_
+    \code
+    char* buffer;
+    buffer = (char*) wolfSSL_Malloc(20);
+    if (buffer == NULL) {
+	    // failed to allocate memory
+    }
+    \endcode
+    
+    \sa wolfSSL_Free
+    \sa wolfSSL_Realloc
+    \sa wolfSSL_SetAllocators
+*/
+WOLFSSL_API void* wolfSSL_Malloc(size_t size, void* heap, int type);
+/*!
+    \ingroup Memory
+    
+    \brief This function is similar to realloc(), but calls the memory 
+    re-allocation function which wolfSSL has been configured to use. 
+    By default, wolfSSL uses realloc().  This can be changed using the 
+    wolfSSL memory abstraction layer - see wolfSSL_SetAllocators().
+    
+    \return pointer If successful, this function returns a pointer to 
+    re-allocated memory. This may be the same pointer as ptr, or a 
+    new pointer location.
+    \return Null If there is an error, NULL will be returned.
+    \return other Specific return values may be dependent on the 
+    underlying memory re-allocation function being used 
+    (if not using the default realloc()).
+    
+    \param ptr pointer to the previously-allocated memory, to be reallocated.
+    \param size number of bytes to allocate.
+    
+    _Example_
+    \code
+    char* buffer;
+
+    buffer = (char*) wolfSSL_Realloc(30);
+    if (buffer == NULL) {
+    	// failed to re-allocate memory
+    }
+    \endcode
+    
+    \sa wolfSSL_Free
+    \sa wolfSSL_Malloc
+    \sa wolfSSL_SetAllocators
+*/
+WOLFSSL_API void* wolfSSL_Realloc(void *ptr, size_t size, void* heap, int type);
+/*!
+    \ingroup Memory
+    
+    \brief This function is similar to free(), but calls the memory free 
+    function which wolfSSL has been configured to use. By default, wolfSSL 
+    uses free(). This can be changed using the wolfSSL memory abstraction 
+    layer - see wolfSSL_SetAllocators().
+    
+    \return none No returns.
+    
+    \param ptr pointer to the memory to be freed.
+    
+    _Example_
+    \code
+    char* buffer;
+    ...
+    wolfSSL_Free(buffer);
+    \endcode
+    
+    \sa wolfSSL_Alloc
+    \sa wolfSSL_Realloc
+    \sa wolfSSL_SetAllocators
+*/
+WOLFSSL_API void  wolfSSL_Free(void *ptr, const char* func, unsigned int line);
+/*!
+    \ingroup Memory
+    
+    \brief This function registers the allocation functions used by wolfSSL. 
+    By default, if the system supports it, malloc/free and realloc are used. 
+    Using this function allows the user at runtime to install their own 
+    memory handlers.
+    
+    \return Success If successful this function will return 0.
+    \return BAD_FUNC_ARG is the error that will be returned if a 
+    function pointer is not provided.
+    
+    \param malloc_function memory allocation function for wolfSSL to use. 
+    Function signature must match wolfSSL_Malloc_cb prototype, above.
+    \param free_function memory free function for wolfSSL to use.  Function 
+    signature must match wolfSSL_Free_cb prototype, above.
+    \param realloc_function memory re-allocation function for wolfSSL to use. 
+    Function signature must match wolfSSL_Realloc_cb prototype, above.
+    
+    _Example_
+    \code
+    int ret = 0;
+    // Memory function prototypes
+    void* MyMalloc(size_t size);
+    void  MyFree(void* ptr);
+    void* MyRealloc(void* ptr, size_t size);
+
+    // Register custom memory functions with wolfSSL
+    ret = wolfSSL_SetAllocators(MyMalloc, MyFree, MyRealloc);
+    if (ret != 0) {
+    	// failed to set memory functions
+    }
+
+    void* MyMalloc(size_t size)
+    {
+    	// custom malloc function
+    }
+
+    void MyFree(void* ptr)
+    {
+    	// custom free function
+    }
+
+    void* MyRealloc(void* ptr, size_t size)
+    {
+    	// custom realloc function
+    }
+    \endcode
+    
+    \sa none
+*/
+WOLFSSL_API int wolfSSL_SetAllocators(wolfSSL_Malloc_cb,
+                                      wolfSSL_Free_cb,
+                                      wolfSSL_Realloc_cb);
+/*!
+    \ingroup Memory
+    
+    \brief This function is available when static memory feature is used 
+    (--enable-staticmemory). It gives the optimum buffer size for memory 
+    “buckets”. This allows for a way to compute buffer size so that no 
+    extra unused memory is left at the end after it has been partitioned. 
+    The returned value, if positive, is the computed buffer size to use. 
+    
+    \return Success On successfully completing buffer size calculations a 
+    positive value is returned. This returned value is for optimum buffer size.
+    \return Failure All negative values are considered to be error cases.
+    
+    \param buffer pointer to buffer
+    \param size size of buffer
+    \param type desired type of memory ie WOLFMEM_GENERAL or WOLFMEM_IO_POOL
+    
+    _Example_
+    \code
+    byte buffer[1000];
+    word32 size = sizeof(buffer);
+    int optimum;
+    optimum = wolfSSL_StaticBufferSz(buffer, size, WOLFMEM_GENERAL);
+    if (optimum < 0) { //handle error case }
+    printf(“The optimum buffer size to make use of all memory is %d\n”, 
+    optimum);
+    ...
+    \endcode
+    
+    \sa wolfSSL_Malloc
+    \sa wolfSSL_Free
+*/
+    WOLFSSL_API int wolfSSL_StaticBufferSz(byte* buffer, word32 sz, int flag);
+/*!
+    \ingroup Memory
+    
+    \brief This function is available when static memory feature is used 
+    (--enable-staticmemory). It gives the size of padding needed for each 
+    partition of memory. This padding size will be the size needed to 
+    contain a memory management structure along with any extra for 
+    memory alignment.
+    
+    \return On successfully memory padding calculation the return value will 
+    be a positive value
+    \return All negative values are considered error cases. 
+    
+    \param none No parameters.
+    
+    _Example_
+    \code
+    int padding;
+    padding = wolfSSL_MemoryPaddingSz();
+    if (padding < 0) { //handle error case }
+    printf(“The padding size needed for each \”bucket\” of memory is %d\n”, 
+    padding);
+    // calculation of buffer for IO POOL size is number of buckets 
+    // times (padding + WOLFMEM_IO_SZ)
+    ...
+    \endcode
+    
+    \sa wolfSSL_Malloc
+    \sa wolfSSL_Free
+*/
+WOLFSSL_API int wolfSSL_MemoryPaddingSz(void);

doc/dox_comments/header_files/pem.h

@@ -0,0 +1,34 @@
+/*!
+    \ingroup openSSL
+    
+    \brief This function writes a key into a WOLFSSL_BIO structure 
+    in PEM format.
+    
+    \return SSL_SUCCESS upon success.
+    \return SSL_FAILURE upon failure.
+    
+    \param bio WOLFSSL_BIO structure to get PEM buffer from.
+    \param key key to convert to PEM format.
+    \param cipher EVP cipher structure.
+    \param passwd password.
+    \param len length of password.
+    \param cb password callback.
+    \param arg optional argument.
+    
+    _Example_
+    \code
+    WOLFSSL_BIO* bio;
+    WOLFSSL_EVP_PKEY* key;
+    int ret;
+    // create bio and setup key
+    ret = wolfSSL_PEM_write_bio_PrivateKey(bio, key, NULL, NULL, 0, NULL, NULL);
+    //check ret value
+    \endcode
+    
+    \sa wolfSSL_PEM_read_bio_X509_AUX
+*/
+WOLFSSL_API
+int wolfSSL_PEM_write_bio_PrivateKey(WOLFSSL_BIO* bio, WOLFSSL_EVP_PKEY* key,
+                                        const WOLFSSL_EVP_CIPHER* cipher,
+                                        unsigned char* passwd, int len,
+                                        pem_password_cb* cb, void* arg);

doc/dox_comments/header_files/pkcs7.h

@@ -0,0 +1,402 @@
+/*!
+    \ingroup PKCS7
+    
+    \brief This function initializes a PKCS7 structure with a DER-formatted 
+    certificate. To initialize an empty PKCS7 structure, one can pass in a NULL 
+    cert and 0 for certSz. 
+    
+    \return 0 Returned on successfully initializing the PKCS7 structure
+    \return MEMORY_E Returned if there is an error allocating memory 
+    with XMALLOC
+    \return ASN_PARSE_E Returned if there is an error parsing the cert header
+    \return ASN_OBJECT_ID_E Returned if there is an error parsing the 
+    encryption type from the cert
+    \return ASN_EXPECT_0_E Returned if there is a formatting error in the 
+    encryption specification of the cert file
+    \return ASN_BEFORE_DATE_E Returned if the date is before the certificate 
+    start date
+    \return ASN_AFTER_DATE_E Returned if the date is after the certificate 
+    expiration date
+    \return ASN_BITSTR_E Returned if there is an error parsing a bit string 
+    from the certificate
+    \return ASN_NTRU_KEY_E Returned if there is an error parsing the NTRU 
+    key from the certificate
+    \return ECC_CURVE_OID_E Returned if there is an error parsing the ECC 
+    key from the certificate
+    \return ASN_UNKNOWN_OID_E Returned if the certificate is using an unknown 
+    key object id
+    \return ASN_VERSION_E Returned if the ALLOW_V1_EXTENSIONS option is not 
+    defined and the certificate is a V1 or V2 certificate
+    \return BAD_FUNC_ARG Returned if there is an error processing the 
+    certificate extension
+    \return ASN_CRIT_EXT_E Returned if an unfamiliar critical extension is 
+    encountered in processing the certificate
+    \return ASN_SIG_OID_E Returned if the signature encryption type is not 
+    the same as the encryption type of the certificate in the provided file
+    \return ASN_SIG_CONFIRM_E Returned if confirming the certification 
+    signature fails
+    \return ASN_NAME_INVALID_E Returned if the certificate’s name is not 
+    permitted by the CA name constraints
+    \return ASN_NO_SIGNER_E Returned if there is no CA signer to verify 
+    the certificate’s authenticity
+
+    \param pkcs7 pointer to the PKCS7 structure in which to 
+    store the decoded cert
+    \param cert pointer to a buffer containing a DER formatted ASN.1 
+    certificate with which to initialize the PKCS7 structure
+    \param certSz size of the certificate buffer
+    
+    _Example_
+    \code
+    PKCS7 pkcs7;
+    byte derBuff[] = { }; // initialize with DER-encoded certificate
+    if ( wc_PKCS7_InitWithCert(&pkcs7, derBuff, sizeof(derBuff)) != 0 ) {
+    	// error parsing certificate into pkcs7 format
+    }
+    \endcode
+    
+    \sa wc_PKCS7_Free
+*/
+WOLFSSL_API int  wc_PKCS7_InitWithCert(PKCS7* pkcs7, byte* cert, word32 certSz);
+/*!
+    \ingroup PKCS7
+    
+    \brief This function releases any memory allocated by a PKCS7 initializer.
+    
+    \return none No returns.
+    
+    \param pkcs7 pointer to the PKCS7 structure to free
+    
+    _Example_
+    \code
+    PKCS7 pkcs7;
+    // initialize and use PKCS7 object
+
+    wc_PKCS7_Free(pkcs7);
+    \endcode
+    
+    \sa wc_PKCS7_InitWithCert
+*/
+WOLFSSL_API void wc_PKCS7_Free(PKCS7* pkcs7);
+/*!
+    \ingroup PKCS7
+    
+    \brief This function builds the PKCS7 data content type, encoding the 
+    PKCS7 structure into a buffer containing a parsable PKCS7 data packet.
+    
+    \return Success On successfully encoding the PKCS7 data into the buffer, 
+    returns the index parsed up to in the PKCS7 structure. This index also 
+    corresponds to the bytes written to the output buffer.
+    \return BUFFER_E Returned if the given buffer is not large enough to hold 
+    the encoded certificate
+    
+    \param pkcs7 pointer to the PKCS7 structure to encode
+    \param output pointer to the buffer in which to store the encoded 
+    certificate
+    \param outputSz size available in the output buffer
+    
+    _Example_
+    \code
+    PKCS7 pkcs7;
+    int ret;
+
+    byte derBuff[] = { }; // initialize with DER-encoded certificate
+    byte pkcs7Buff[FOURK_BUF];
+
+    wc_PKCS7_InitWithCert(&pkcs7, derBuff, sizeof(derBuff));
+    // update message and data to encode
+    pkcs7.privateKey = key;
+    pkcs7.privateKeySz = keySz;
+    pkcs7.content = data;
+    pkcs7.contentSz = dataSz;
+    ... etc.
+
+    ret = wc_PKCS7_EncodeData(&pkcs7, pkcs7Buff, sizeof(pkcs7Buff));
+    if ( ret != 0 ) {
+	    // error encoding into output buffer
+    }
+    \endcode
+    
+    \sa wc_PKCS7_InitWithCert
+*/
+WOLFSSL_API int  wc_PKCS7_EncodeData(PKCS7* pkcs7, byte* output,
+                                       word32 outputSz);
+/*!
+    \ingroup PKCS7
+    
+    \brief This function builds the PKCS7 signed data content type, encoding 
+    the PKCS7 structure into a buffer containing a parsable PKCS7 
+    signed data packet.
+    
+    \return Success On successfully encoding the PKCS7 data into the buffer, 
+    returns the index parsed up to in the PKCS7 structure. This index also 
+    corresponds to the bytes written to the output buffer.
+    \return BAD_FUNC_ARG Returned if the PKCS7 structure is missing one or 
+    more required elements to generate a signed data packet
+    \return MEMORY_E Returned if there is an error allocating memory
+    \return PUBLIC_KEY_E Returned if there is an error parsing the public key
+    \return RSA_BUFFER_E Returned if buffer error, output too small or input 
+    too large
+    \return BUFFER_E Returned if the given buffer is not large enough to hold 
+    the encoded certificate
+    \return MP_INIT_E may be returned if there is an error generating 
+    the signature
+    \return MP_READ_E may be returned if there is an error generating 
+    the signature
+    \return MP_CMP_E may be returned if there is an error generating 
+    the signature
+    \return MP_INVMOD_E may be returned if there is an error generating 
+    the signature
+    \return MP_EXPTMOD_E may be returned if there is an error generating 
+    the signature
+    \return MP_MOD_E may be returned if there is an error generating 
+    the signature
+    \return MP_MUL_E may be returned if there is an error generating 
+    the signature
+    \return MP_ADD_E may be returned if there is an error generating 
+    the signature
+    \return MP_MULMOD_E may be returned if there is an error generating 
+    the signature
+    \return MP_TO_E may be returned if there is an error generating 
+    the signature
+    \return MP_MEM may be returned if there is an error generating the signature
+    
+    \param pkcs7 pointer to the PKCS7 structure to encode
+    \param output pointer to the buffer in which to store the 
+    encoded certificate
+    \param outputSz size available in the output buffer
+
+    _Example_
+    \code
+    PKCS7 pkcs7;
+    int ret;
+
+    byte derBuff[] = { }; // initialize with DER-encoded certificate
+    byte pkcs7Buff[FOURK_BUF];
+
+    wc_PKCS7_InitWithCert(&pkcs7, derBuff, sizeof(derBuff));
+    // update message and data to encode
+    pkcs7.privateKey = key;
+    pkcs7.privateKeySz = keySz;
+    pkcs7.content = data;
+    pkcs7.contentSz = dataSz;
+    ... etc.
+
+    ret = wc_PKCS7_EncodeSignedData(&pkcs7, pkcs7Buff, sizeof(pkcs7Buff));
+    if ( ret != 0 ) {
+    	// error encoding into output buffer
+    }
+    \endcode
+    
+    \sa wc_PKCS7_InitWithCert
+    \sa wc_PKCS7_VerifySignedData
+*/
+WOLFSSL_API int  wc_PKCS7_EncodeSignedData(PKCS7* pkcs7,
+                                       byte* output, word32 outputSz);
+/*!
+    \ingroup PKCS7
+    
+    \brief This function takes in a transmitted PKCS7 signed data message, 
+    extracts the certificate list and certificate revocation list, and then 
+    verifies the signature. It stores the extracted content in the given 
+    PKCS7 structure.
+    
+    \return 0 Returned on successfully extracting the information 
+    from the message
+    \return BAD_FUNC_ARG Returned if one of the input parameters is invalid
+    \return ASN_PARSE_E Returned if there is an error parsing from the 
+    given pkiMsg
+    \return PKCS7_OID_E Returned if the given pkiMsg is not a signed data type
+    \return ASN_VERSION_E Returned if the PKCS7 signer info is not version 1
+    \return MEMORY_E Returned if there is an error allocating memory
+    \return PUBLIC_KEY_E Returned if there is an error parsing the public key
+    \return RSA_BUFFER_E Returned if buffer error, output too small or 
+    input too large
+    \return BUFFER_E Returned if the given buffer is not large enough to 
+    hold the encoded certificate
+    \return MP_INIT_E may be returned if there is an error generating 
+    the signature
+    \return MP_READ_E may be returned if there is an error generating 
+    the signature
+    \return MP_CMP_E may be returned if there is an error generating 
+    the signature
+    \return MP_INVMOD_E may be returned if there is an error generating 
+    the signature
+    \return MP_EXPTMOD_E may be returned if there is an error generating 
+    the signature
+    \return MP_MOD_E may be returned if there is an error generating 
+    the signature
+    \return MP_MUL_E may be returned if there is an error generating 
+    the signature
+    \return MP_ADD_E may be returned if there is an error generating 
+    the signature
+    \return MP_MULMOD_E may be returned if there is an error generating 
+    the signature
+    \return MP_TO_E may be returned if there is an error generating 
+    the signature
+    \return MP_MEM may be returned if there is an error generating the signature
+    
+    \param pkcs7 pointer to the PKCS7 structure in which to store the parsed 
+    certificates
+    \param pkiMsg pointer to the buffer containing the signed message to verify 
+    and decode
+    \param pkiMsgSz size of the signed message
+    
+    _Example_
+    \code
+    PKCS7 pkcs7;
+    int ret;
+
+    byte derBuff[] = { }; // initialize with DER-encoded certificate
+    byte pkcs7Buff[FOURK_BUF];
+
+    wc_PKCS7_InitWithCert(&pkcs7, derBuff, sizeof(derBuff));
+    // update message and data to encode
+    pkcs7.privateKey = key;
+    pkcs7.privateKeySz = keySz;
+    pkcs7.content = data;
+    pkcs7.contentSz = dataSz;
+    ... etc.
+
+    ret = wc_PKCS7_EncodeSignedData(&pkcs7, pkcs7Buff, sizeof(pkcs7Buff));
+    if ( ret != 0 ) {
+    	// error encoding into output buffer
+    }
+    \endcode
+    
+    \sa wc_PKCS7_InitWithCert
+    \sa wc_PKCS7_EncodeSignedData
+*/
+WOLFSSL_API int  wc_PKCS7_VerifySignedData(PKCS7* pkcs7,
+                                       byte* pkiMsg, word32 pkiMsgSz);
+/*!
+    \ingroup PKCS7
+    
+    \brief This function builds the PKCS7 enveloped data content type, encoding 
+    the PKCS7 structure into a buffer containing a parsable PKCS7 enveloped 
+    data packet.
+    
+    \return Success Returned on successfully encoding the message in enveloped 
+    data format, returns the size written to the output buffer
+    \return BAD_FUNC_ARG: Returned if one of the input parameters is invalid, 
+    or if the PKCS7 structure is missing required elements
+    \return ALGO_ID_E Returned if the PKCS7 structure is using an unsupported 
+    algorithm type. Currently, only DESb and DES3b are supported 
+    \return BUFFER_E Returned if the given output buffer is too small to store 
+    the output data
+    \return MEMORY_E Returned if there is an error allocating memory
+    \return RNG_FAILURE_E Returned if there is an error initializing the random 
+    number generator for encryption
+    \return DRBG_FAILED Returned if there is an error generating numbers with 
+    the random number generator used for encryption
+    
+    \param pkcs7 pointer to the PKCS7 structure to encode
+    \param output pointer to the buffer in which to store the encoded 
+    certificate
+    \param outputSz size available in the output buffer
+    
+    _Example_
+    \code
+    PKCS7 pkcs7;
+    int ret;
+
+    byte derBuff[] = { }; // initialize with DER-encoded certificate
+    byte pkcs7Buff[FOURK_BUF];
+
+    wc_PKCS7_InitWithCert(&pkcs7, derBuff, sizeof(derBuff));
+    // update message and data to encode
+    pkcs7.privateKey = key;
+    pkcs7.privateKeySz = keySz;
+    pkcs7.content = data;
+    pkcs7.contentSz = dataSz;
+    ... etc.
+
+    ret = wc_PKCS7_EncodeEnvelopedData(&pkcs7, pkcs7Buff, sizeof(pkcs7Buff));
+    if ( ret != 0 ) {
+    	// error encoding into output buffer
+    }
+    \endcode
+    
+    \sa wc_PKCS7_InitWithCert
+    \sa wc_PKCS7_DecodeEnvelopedData
+*/
+WOLFSSL_API int  wc_PKCS7_EncodeEnvelopedData(PKCS7* pkcs7,
+                                          byte* output, word32 outputSz);
+/*!
+    \ingroup PKCS7
+    
+    \brief This function unwraps and decrypts a PKCS7 enveloped data content 
+    type, decoding the message into output. It uses the private key of the 
+    PKCS7 object passed in to decrypt the message.
+    
+    \return On successfully extracting the information from the message, 
+    returns the bytes written to output
+    \return BAD_FUNC_ARG Returned if one of the input parameters is invalid
+    \return ASN_PARSE_E Returned if there is an error parsing from the 
+    given pkiMsg
+    \return PKCS7_OID_E Returned if the given pkiMsg is not an enveloped 
+    data type
+    \return ASN_VERSION_E Returned if the PKCS7 signer info is not version 0
+    \return MEMORY_E Returned if there is an error allocating memory
+    \return ALGO_ID_E Returned if the PKCS7 structure is using an unsupported 
+    algorithm type. Currently, only DESb and DES3b are supported for 
+    encryption, with RSAk for signature generation
+    \return PKCS7_RECIP_E Returned if there is no recipient found in the 
+    enveloped data that matches the recipient provided
+    \return RSA_BUFFER_E Returned if there is an error during RSA signature 
+    verification due to buffer error, output too small or input too large.
+    \return MP_INIT_E may be returned if there is an error during signature 
+    verification
+    \return MP_READ_E may be returned if there is an error during signature 
+    verification
+    \return MP_CMP_E may be returned if there is an error during signature 
+    verification
+    \return MP_INVMOD_E may be returned if there is an error during signature 
+    verification
+    \return MP_EXPTMOD_E may be returned if there is an error during signature 
+    verification
+    \return MP_MOD_E may be returned if there is an error during signature 
+    verification
+    \return MP_MUL_E may be returned if there is an error during signature 
+    verification
+    \return MP_ADD_E may be returned if there is an error during signature 
+    verification
+    \return MP_MULMOD_E may be returned if there is an error during signature 
+    verification
+    \return MP_TO_E may be returned if there is an error during signature 
+    verification
+    \return MP_MEM may be returned if there is an error during signature 
+    verification
+    
+    \param pkcs7 pointer to the PKCS7 structure containing the private key with 
+    which to decode the enveloped data package
+    \param pkiMsg pointer to the buffer containing the enveloped data package
+    \param pkiMsgSz size of the enveloped data package
+    \param output pointer to the buffer in which to store the decoded message
+    \param outputSz size available in the output buffer
+
+    _Example_
+    \code
+    PKCS7 pkcs7;
+    byte received[] = { }; // initialize with received enveloped message
+    byte decoded[FOURK_BUF];
+    int decodedSz;
+
+    // initialize pkcs7 with certificate
+    // update key
+    pkcs7.privateKey = key;
+    pkcs7.privateKeySz = keySz;
+
+    decodedSz = wc_PKCS7_DecodeEnvelopedData(&pkcs7, received, 
+    sizeof(received),decoded, sizeof(decoded));
+    if ( decodedSz != 0 ) {
+    	// error decoding message
+    }
+    \endcode
+    
+    \sa wc_PKCS7_InitWithCert
+    \sa wc_PKCS7_EncodeEnvelopedData
+*/
+WOLFSSL_API int  wc_PKCS7_DecodeEnvelopedData(PKCS7* pkcs7, byte* pkiMsg,
+                                          word32 pkiMsgSz, byte* output,
+                                          word32 outputSz);

doc/dox_comments/header_files/poly1305.h

@@ -0,0 +1,136 @@
+/*!
+    \ingroup Poly1305
+    
+    \brief This function sets the key for a Poly1305 context structure, 
+    initializing it for hashing. Note: A new key should be set after 
+    generating a message hash with wc_Poly1305Final to ensure security.
+    
+    \return 0 Returned on successfully setting the key and initializing 
+    the Poly1305 structure
+    \return BAD_FUNC_ARG Returned if the given key is not 32 bytes long, 
+    or the Poly1305 context is NULL
+    
+    \param ctx pointer to a Poly1305 structure to initialize
+    \param key pointer to the buffer containing the key to use for hashing
+    \param keySz size of the key in the buffer. Should be 32 bytes
+
+    _Example_
+    \code
+    Poly1305 enc;
+    byte key[] = { initialize with 32 byte key to use for hashing };
+    wc_Poly1305SetKey(&enc, key, sizeof(key));
+    \endcode
+    
+    \sa wc_Poly1305Update
+    \sa wc_Poly1305Final
+*/
+WOLFSSL_API int wc_Poly1305SetKey(Poly1305* poly1305, const byte* key,
+                                  word32 kySz);
+/*!
+    \ingroup Poly1305
+    
+    \brief This function updates the message to hash with the 
+    Poly1305 structure.
+    
+    \return 0 Returned on successfully updating the message to hash
+    \return BAD_FUNC_ARG Returned if the Poly1305 structure is NULL
+
+    \param ctx pointer to a Poly1305 structure for which to update 
+    the message to hash
+    \param m pointer to the buffer containing the message which should 
+    be added to the hash
+    \param bytes size of the message to hash
+
+    _Example_
+    \code
+    Poly1305 enc;
+    byte key[] = { }; // initialize with 32 byte key to use for encryption
+
+    byte msg[] = { }; // initialize with message to hash
+    wc_Poly1305SetKey(&enc, key, sizeof(key));
+
+    if( wc_Poly1305Update(key, msg, sizeof(msg)) != 0 ) {
+	    // error updating message to hash
+    }
+    \endcode
+    
+    \sa wc_Poly1305SetKey
+    \sa wc_Poly1305Final
+*/
+WOLFSSL_API int wc_Poly1305Update(Poly1305* poly1305, const byte*, word32);
+/*!
+    \ingroup Poly1305
+    
+    \brief This function calculates the hash of the input messages 
+    and stores the result in mac. After this is called, the key 
+    should be reset.
+    
+    \return 0 Returned on successfully computing the final MAC
+    \return BAD_FUNC_ARG Returned if the Poly1305 structure is NULL
+    
+    \param ctx pointer to a Poly1305 structure with which to generate the MAC
+    \param mac pointer to the buffer in which to store the MAC. 
+    Should be POLY1305_DIGEST_SIZE (16 bytes) wide
+    
+    _Example_
+    \code
+    Poly1305 enc;
+    byte mac[POLY1305_DIGEST_SIZE]; // space for a 16 byte mac
+
+    byte key[] = { }; // initialize with 32 byte key to use for encryption
+
+    byte msg[] = { }; // initialize with message to hash
+    wc_Poly1305SetKey(&enc, key, sizeof(key));
+    wc_Poly1305Update(key, msg, sizeof(msg));
+
+    if ( wc_Poly1305Final(&enc, mac) != 0 ) {
+    	// error computing final MAC
+    }
+    \endcode
+    
+    \sa wc_Poly1305SetKey
+    \sa wc_Poly1305Update
+*/
+WOLFSSL_API int wc_Poly1305Final(Poly1305* poly1305, byte* tag);
+/*!
+    \ingroup Poly1305
+    
+    \brief Takes in an initialized Poly1305 struct that has a key 
+    loaded and creates a MAC (tag) using recent TLS AEAD padding scheme.
+    
+    \return 0 Success
+    \return BAD_FUNC_ARG Returned if ctx, input, or tag is null or if 
+    additional is null and addSz is greater than 0 or if tagSz is less 
+    than WC_POLY1305_MAC_SZ.
+    
+    \param ctx Initialized Poly1305 struct to use
+    \param additional Additional data to use
+    \param addSz Size of additional buffer
+    \param input Input buffer to create tag from
+    \param sz Size of input buffer
+    \param tag Buffer to hold created tag
+    \param tagSz Size of input tag buffer (must be at least 
+    WC_POLY1305_MAC_SZ(16))
+    
+    _Example_
+    \code
+    Poly1305 ctx;
+    byte key[] = { }; // initialize with 32 byte key to use for hashing
+    byte additional[] = { }; // initialize with additional data 
+    byte msg[] = { }; // initialize with message
+    byte tag[16];
+
+    wc_Poly1305SetKey(&ctx, key, sizeof(key));
+    if(wc_Poly1305_MAC(&ctx, additional, sizeof(additional), (byte*)msg, 
+    sizeof(msg), tag, sizeof(tag)) != 0)
+    {
+        // Handle the error
+    }
+    \endcode
+    
+    \sa wc_Poly1305SetKey
+    \sa wc_Poly1305Update
+    \sa wcPoly1305Final
+*/
+WOLFSSL_API int wc_Poly1305_MAC(Poly1305* ctx, byte* additional, word32 addSz,
+                               byte* input, word32 sz, byte* tag, word32 tagSz);

doc/dox_comments/header_files/pwdbased.h

@@ -0,0 +1,164 @@
+/*!
+    \ingroup Password
+    
+    \brief This function implements the Password Based Key Derivation 
+    Function 1 (PBKDF1), converting an input password with a concatenated salt 
+    into a more secure key, which it stores in output. It allows the user to 
+    select between SHA and MD5 as hash functions.
+    
+    \return 0 Returned on successfully deriving a key from the input password
+    \return BAD_FUNC_ARG Returned if there is an invalid hash type given 
+    (valid type are: MD5 and SHA), iterations is less than 1, or the key 
+    length (kLen) requested is greater than the hash length of the provided hash
+    \return MEMORY_E Returned if there is an error allocating memory for a 
+    SHA or MD5 object
+    
+    \param output pointer to the buffer in which to store the generated key. 
+    Should be at least kLen long
+    \param passwd pointer to the buffer containing the password to use for 
+    the key derivation
+    \param pLen length of the password to use for key derivation
+    \param salt pointer to the buffer containing the salt to use for 
+    key derivation
+    \param sLen length of the salt
+    \param iterations number of times to process the hash
+    \param kLen desired length of the derived key. Should not be longer 
+    than the digest size of the hash chosen
+    \param hashType the hashing algorithm to use. Valid choices are MD5 and SHA
+    
+    _Example_
+    \code
+    int ret;
+    byte key[MD5_DIGEST_SIZE];
+    byte pass[] = { }; // initialize with password 
+    byte salt[] = { }; // initialize with salt
+
+    ret = wc_PBKDF1(key, pass, sizeof(pass), salt, sizeof(salt), 1000, 
+    sizeof(key), MD5);
+    if ( ret != 0 ) {
+    	// error deriving key from password
+    }
+    \endcode
+    
+    \sa wc_PBKDF2
+    \sa wc_PKCS12_PBKDF
+*/
+WOLFSSL_API int wc_PBKDF1(byte* output, const byte* passwd, int pLen,
+                      const byte* salt, int sLen, int iterations, int kLen,
+                      int typeH);
+/*!
+    \ingroup Password
+    
+    \brief This function implements the Password Based Key Derivation 
+    Function 2 (PBKDF2), converting an input password with a concatenated 
+    salt into a more secure key, which it stores in output. It allows the user 
+    to select any of the supported HMAC hash functions, including: MD5, SHA, 
+    SHA256, SHA384, SHA512, and BLAKE2B
+    
+    \return 0 Returned on successfully deriving a key from the input password
+    \return BAD_FUNC_ARG Returned if there is an invalid hash type given or 
+    iterations is less than 1
+    \return MEMORY_E Returned if there is an allocating memory for 
+    the HMAC object
+
+    \param output pointer to the buffer in which to store the generated key. 
+    Should be kLen long
+    \param passwd pointer to the buffer containing the password to use for 
+    the key derivation
+    \param pLen length of the password to use for key derivation
+    \param salt pointer to the buffer containing the salt to use for 
+    key derivation
+    \param sLen length of the salt
+    \param iterations number of times to process the hash
+    \param kLen desired length of the derived key
+    \param hashType the hashing algorithm to use. Valid choices are: MD5, 
+    SHA, SHA256, SHA384, SHA512, and BLAKE2B
+    
+    _Example_
+    \code
+    int ret;
+    byte key[64];
+    byte pass[] = { }; // initialize with password
+    byte salt[] = { }; // initialize with salt
+
+    ret = wc_PBKDF2(key, pass, sizeof(pass), salt, sizeof(salt), 2048, sizeof(key), 
+    SHA512);
+    if ( ret != 0 ) {
+    	// error deriving key from password
+    }
+    \endcode
+    
+    \sa wc_PBKDF1
+    \sa wc_PKCS12_PBKDF
+*/
+WOLFSSL_API int wc_PBKDF2(byte* output, const byte* passwd, int pLen,
+                      const byte* salt, int sLen, int iterations, int kLen,
+                      int typeH);
+/*!
+    \ingroup Password
+    
+    \brief This function implements the Password Based Key Derivation Function 
+    (PBKDF) described in RFC 7292 Appendix B. This function converts an input 
+    password with a concatenated salt into a more secure key, which it stores 
+    in output. It allows the user to select any of the supported HMAC hash 
+    functions, including: MD5, SHA, SHA256, SHA384, SHA512, and BLAKE2B.
+    
+    \return 0 Returned on successfully deriving a key from the input password
+    \return BAD_FUNC_ARG Returned if there is an invalid hash type given, 
+    iterations is less than 1, or the key length (kLen) requested is greater 
+    than the hash length of the provided hash
+    \return MEMORY_E Returned if there is an allocating memory
+    \return MP_INIT_E may be returned if there is an error during key generation
+    \return MP_READ_E may be returned if there is an error during key generation
+    \return MP_CMP_E may be returned if there is an error during key generation
+    \return MP_INVMOD_E may be returned if there is an error during 
+    key generation
+    \return MP_EXPTMOD_E may be returned if there is an error during 
+    key generation
+    \return MP_MOD_E may be returned if there is an error during key generation
+    \return MP_MUL_E may be returned if there is an error during key generation
+    \return MP_ADD_E may be returned if there is an error during key generation
+    \return MP_MULMOD_E may be returned if there is an error during 
+    key generation
+    \return MP_TO_E may be returned if there is an error during key generation
+    \return MP_MEM may be returned if there is an error during key generation
+    
+    \param output pointer to the buffer in which to store the generated key. 
+    Should be kLen long
+    \param passwd pointer to the buffer containing the password to use for 
+    the key derivation
+    \param pLen length of the password to use for key derivation
+    \param salt pointer to the buffer containing the salt to use 
+    for key derivation
+    \param sLen length of the salt
+    \param iterations number of times to process the hash
+    \param kLen desired length of the derived key
+    \param hashType the hashing algorithm to use. Valid choices are: MD5, 
+    SHA, SHA256, SHA384, SHA512, and BLAKE2B
+    \param id this is a byte indetifier indicating the purpose of key 
+    generation. It is used to diversify the key output, and should be 
+    assigned as follows: ID=1: pseudorandom bits are to be used as key 
+    material for performing encryption or decryption. ID=2: pseudorandom 
+    bits are to be used an IV (Initial Value) for encryption or decryption. 
+    ID=3: pseudorandom bits are to be used as an integrity key for MACing.
+    
+    _Example_
+    \code
+    int ret;
+    byte key[64];
+    byte pass[] = { }; // initialize with password 
+    byte salt[] = { }; // initialize with salt
+
+    ret = wc_PKCS512_PBKDF(key, pass, sizeof(pass), salt, sizeof(salt), 2048, 
+    sizeof(key), SHA512, 1);
+    if ( ret != 0 ) {
+    	// error deriving key from password
+    }
+    \endcode
+    
+    \sa wc_PBKDF1
+    \sa wc_PBKDF2
+*/
+WOLFSSL_API int wc_PKCS12_PBKDF(byte* output, const byte* passwd, int pLen,
+                            const byte* salt, int sLen, int iterations,
+                            int kLen, int typeH, int purpose);

doc/dox_comments/header_files/rabbit.h

@@ -0,0 +1,65 @@
+/*!
+    \ingroup Rabbit
+    
+    \brief This function encrypts or decrypts a message of any size, storing 
+    the result in output. It requires that the Rabbit ctx structure be 
+    initialized with a key and an iv before encryption.
+
+    \return 0 Returned on successfully encrypting/decrypting input
+    \return BAD_ALIGN_E Returned if the input message is not 4-byte aligned 
+    but is required to be by XSTREAM_ALIGN, but NO_WOLFSSL_ALLOC_ALIGN is 
+    defined
+    \return MEMORY_E Returned if there is an error allocating memory to 
+    align the message, if NO_WOLFSSL_ALLOC_ALIGN is not defined
+    
+    \param ctx pointer to the Rabbit structure to use for encryption/decryption
+    \param output pointer to the buffer in which to store the processed 
+    message. Should be at least msglen long
+    \param input pointer to the buffer containing the message to process
+    \param msglen the length of the message to process
+    
+    _Example_
+    \code
+    int ret;
+    Rabbit enc;
+    byte key[] = { }; // initialize with 16 byte key
+    byte iv[]  = { }; // initialize with 8 byte iv
+
+    wc_RabbitSetKey(&enc, key, iv);
+
+    byte message[] = { }; // initialize with plaintext message
+    byte ciphertext[sizeof(message)];
+
+    wc_RabbitProcess(enc, ciphertext, message, sizeof(message));
+    \endcode
+    
+    \sa wc_RabbitSetKey
+*/
+WOLFSSL_API int wc_RabbitProcess(Rabbit*, byte*, const byte*, word32);
+/*!
+    \ingroup Rabbit
+    
+    \brief This function initializes a Rabbit context for use with 
+    encryption or decryption by setting its iv and key.
+    
+    \return 0 Returned on successfully setting the key and iv
+    
+    \param ctx pointer to the Rabbit structure to initialize
+    \param key pointer to the buffer containing the 16 byte key to 
+    use for encryption/decryption
+    \param iv pointer to the buffer containing the 8 byte iv with 
+    which to initialize the Rabbit structure
+    
+    _Example_
+    \code
+    int ret;
+    Rabbit enc;
+    byte key[] = { }; // initialize with 16 byte key
+    byte iv[]  = { }; // initialize with 8 byte iv
+
+    wc_RabbitSetKey(&enc, key, iv)
+    \endcode
+    
+    \sa wc_RabbitProcess
+*/
+WOLFSSL_API int wc_RabbitSetKey(Rabbit*, const byte* key, const byte* iv);

doc/dox_comments/header_files/random.h

@@ -0,0 +1,260 @@
+/*!
+    \ingroup Random
+    
+    \brief Init global Whitewood netRandom context
+    
+    \return 0 Success
+    \return BAD_FUNC_ARG Either configFile is null or timeout is negative.
+    \return RNG_FAILURE_E There was a failure initializing the rng.
+    
+    \param configFile Path to configuration file
+    \param hmac_cb Optional to create HMAC callback.
+    \param timeout A timeout duration.
+    
+    _Example_
+    \code
+    char* config = "path/to/config/example.conf";
+    int time = // Some sufficient timeout value;
+
+    if (wc_InitNetRandom(config, NULL, time) != 0)
+    {
+        // Some error occured
+    }
+    \endcode
+    
+    \sa wc_FreeNetRandom
+*/
+WOLFSSL_API int  wc_InitNetRandom(const char*, wnr_hmac_key, int);
+/*!
+    \ingroup Random
+    
+    \brief Free global Whitewood netRandom context.
+    
+    \return 0 Success
+    \return BAD_MUTEX_E Error locking mutex on wnr_mutex
+    
+    \param none No returns.
+    
+    _Example_
+    \code
+    int ret = wc_FreeNetRandom();
+    if(ret != 0)
+    {
+        // Handle the error
+    }
+    \endcode
+    
+    \sa wc_InitNetRandom
+*/
+WOLFSSL_API int  wc_FreeNetRandom(void);
+/*!
+    \ingroup Random
+    
+    \brief Gets the seed (from OS) and key cipher for rng.  rng->drbg 
+    (deterministic random bit generator) allocated (should be deallocated 
+    with wc_FreeRng).  This is a blocking operation.
+    
+    \return 0 on success.
+    \return MEMORY_E XMALLOC failed
+    \return WINCRYPT_E wc_GenerateSeed: failed to acquire context
+    \return CRYPTGEN_E wc_GenerateSeed: failed to get random
+    \return BAD_FUNC_ARG wc_RNG_GenerateBlock input is null or sz exceeds 
+    MAX_REQUEST_LEN
+    \return DRBG_CONT_FIPS_E wc_RNG_GenerateBlock: Hash_gen returned 
+    DRBG_CONT_FAILURE
+    \return RNG_FAILURE_E wc_RNG_GenerateBlock: Default error.  rng’s 
+    status originally not ok, or set to DRBG_FAILED
+    
+    \param rng random number generator to be initialized for use 
+    with a seed and key cipher
+    
+    _Example_
+    \code
+    RNG  rng;
+    int ret;
+    
+    #ifdef HAVE_CAVIUM
+    ret = wc_InitRngCavium(&rng, CAVIUM_DEV_ID);
+    if (ret != 0){       
+        printf(“RNG Nitrox init for device: %d failed”, CAVIUM_DEV_ID);
+        return -1;
+    }
+    #endif
+    ret = wc_InitRng(&rng);
+    if (ret != 0){
+        printf(“RNG init failed”);
+        return -1;
+    }
+    \endcode
+    
+    \sa wc_InitRngCavium
+    \sa wc_RNG_GenerateBlock
+    \sa wc_RNG_GenerateByte
+    \sa wc_FreeRng
+    \sa wc_RNG_HealthTest
+*/
+WOLFSSL_API int  wc_InitRng(WC_RNG*);
+/*!
+    \ingroup Random
+    
+    \brief Copies a sz bytes of pseudorandom data to output. Will 
+    reseed rng if needed (blocking).
+    
+    \return 0 on success
+    \return BAD_FUNC_ARG an input is null or sz exceeds MAX_REQUEST_LEN
+    \return DRBG_CONT_FIPS_E Hash_gen returned DRBG_CONT_FAILURE
+    \return RNG_FAILURE_E Default error. rng’s status originally not 
+    ok, or set to DRBG_FAILED
+    
+    \param rng random number generator initialized with wc_InitRng
+    \param output buffer to which the block is copied
+    \param sz size of output in bytes
+    
+    _Example_
+    \code
+    RNG  rng;
+    int  sz = 32;
+    byte block[sz];
+
+    int ret = wc_InitRng(&rng);
+    if (ret != 0) {
+        return -1; //init of rng failed!
+    }
+    
+    ret = wc_RNG_GenerateBlock(&rng, block, sz);
+    if (ret != 0) {
+        return -1; //generating block failed!
+    }
+    \endcode
+    
+    \sa wc_InitRngCavium, wc_InitRng
+    \sa wc_RNG_GenerateByte
+    \sa wc_FreeRng
+    \sa wc_RNG_HealthTest
+*/
+WOLFSSL_API int  wc_RNG_GenerateBlock(WC_RNG*, byte*, word32 sz);
+/*!
+    \ingroup Random
+    
+    \brief Calls wc_RNG_GenerateBlock to copy a byte of pseudorandom 
+    data to b. Will reseed rng if needed.
+    
+    \return 0 on success
+    \return BAD_FUNC_ARG an input is null or sz exceeds MAX_REQUEST_LEN
+    \return DRBG_CONT_FIPS_E Hash_gen returned DRBG_CONT_FAILURE
+    \return RNG_FAILURE_E Default error.  rng’s status originally not 
+    ok, or set to DRBG_FAILED
+    
+    \param rng: random number generator initialized with wc_InitRng
+    \param b one byte buffer to which the block is copied
+    
+    _Example_
+    \code
+    RNG  rng;
+    int  sz = 32;
+    byte b[1];
+
+    int ret = wc_InitRng(&rng);
+    if (ret != 0) {
+        return -1; //init of rng failed!
+    }
+
+    ret = wc_RNG_GenerateByte(&rng, b);
+    if (ret != 0) {
+        return -1; //generating block failed!
+    }
+    \endcode
+    
+    \sa wc_InitRngCavium
+    \sa wc_InitRng
+    \sa wc_RNG_GenerateBlock
+    \sa wc_FreeRng
+    \sa wc_RNG_HealthTest
+*/
+WOLFSSL_API int  wc_RNG_GenerateByte(WC_RNG*, byte*);
+/*!
+    \ingroup Random
+    
+    \brief Should be called when RNG no longer needed in order to securely 
+    free drgb.  Zeros and XFREEs rng-drbg.
+    
+    \return 0 on success
+    \return BAD_FUNC_ARG rng or rng->drgb null
+    \return RNG_FAILURE_E Failed to deallocated drbg
+    
+    \param rng random number generator initialized with wc_InitRng
+    
+    _Example_
+    \code
+    RNG  rng;
+    int ret = wc_InitRng(&rng);
+    if (ret != 0) {
+        return -1; //init of rng failed!
+    }
+
+    int ret = wc_FreeRng(&rng);
+    if (ret != 0) { 
+        return -1; //free of rng failed!
+    }
+    \endcode
+    
+    \sa wc_InitRngCavium
+    \sa wc_InitRng
+    \sa wc_RNG_GenerateBlock
+    \sa wc_RNG_GenerateByte, 
+    \sa wc_RNG_HealthTest
+*/
+WOLFSSL_API int  wc_FreeRng(WC_RNG*);
+/*!
+    \ingroup Random
+    
+    \brief Creates and tests functionality of drbg.
+    
+    \return 0 on success
+    \return BAD_FUNC_ARG entropyA and output must not be null.  If reseed 
+    set entropyB must not be null
+    \return -1 test failed
+    
+    \param int reseed: if set, will test reseed functionality
+    \param entropyA: entropy to instantiate drgb with
+    \param entropyASz: size of entropyA in bytes
+    \param entropyB: If reseed set, drbg will be reseeded with entropyB
+    \param entropyBSz: size of entropyB in bytes
+    \param output: initialized to random data seeded with entropyB if 
+    seedrandom is set, and entropyA otherwise
+    \param outputSz: length of output in bytes
+    
+    _Example_
+    \code
+    byte output[SHA256_DIGEST_SIZE * 4];
+    const byte test1EntropyB[] = ....; // test input for reseed false
+    const byte test1Output[] = ....;   // testvector: expected output of
+                                   // reseed false
+    ret = wc_RNG_HealthTest(0, test1Entropy, sizeof(test1Entropy), NULL, 0,
+                        output, sizeof(output));
+    if (ret != 0)
+        return -1;//healthtest without reseed failed
+
+    if (XMEMCMP(test1Output, output, sizeof(output)) != 0)
+        return -1; //compare to testvector failed: unexpected output
+
+    const byte test2EntropyB[] = ....; // test input for reseed
+    const byte test2Output[] = ....;   // testvector expected output of reseed
+    ret = wc_RNG_HealthTest(1, test2EntropyA, sizeof(test2EntropyA),
+                        test2EntropyB, sizeof(test2EntropyB),
+                        output, sizeof(output));
+   
+    if (XMEMCMP(test2Output, output, sizeof(output)) != 0)
+        return -1; //compare to testvector failed
+    \endcode
+    
+    \sa wc_InitRngCavium
+    \sa wc_InitRng
+    \sa wc_RNG_GenerateBlock
+    \sa wc_RNG_GenerateByte
+    \sa wc_FreeRng
+*/
+WOLFSSL_API int wc_RNG_HealthTest(int reseed,
+                                        const byte* entropyA, word32 entropyASz,
+                                        const byte* entropyB, word32 entropyBSz,
+                                        byte* output, word32 outputSz);

doc/dox_comments/header_files/ripemd.h

@@ -0,0 +1,101 @@
+/*!
+    \ingroup RIPEMD
+    
+    \brief This function initializes a ripemd structure by initializing 
+    ripemd’s digest, buffer, loLen and hiLen.
+    
+    \return 0 returned on successful execution of the function. The RipeMd 
+    structure is initialized.
+    \return BAD_FUNC_ARG returned if the RipeMd structure is NULL.
+    
+    \param ripemd pointer to the ripemd structure to initialize
+    
+    _Example_
+    \code
+    RipeMd md;
+    int ret;
+    ret = wc_InitRipeMd(&md);
+    if (ret != 0) {
+    	// Failure case.
+    }
+    \endcode
+    
+    \sa wc_RipeMdUpdate
+    \sa wc_RipeMdFinal
+*/
+WOLFSSL_API int wc_InitRipeMd(RipeMd*);
+/*!
+    \ingroup RIPEMD
+    
+    \brief This function generates the RipeMd digest of the data input and 
+    stores the result in the ripemd->digest buffer. After running 
+    wc_RipeMdUpdate, one should compare the generated ripemd->digest to a 
+    known authentication tag to verify the authenticity of a message.
+    
+    \return 0 Returned on successful execution of the function.
+    \return BAD_FUNC_ARG Returned if the RipeMd structure is NULL or if data 
+    is NULL and len is not zero. This function should execute if data is NULL 
+    and len is 0.
+    
+    \param ripemd: pointer to the ripemd structure to be initialized with 
+    wc_InitRipeMd
+    \param data data to be hashed
+    \param len sizeof data in bytes
+
+    _Example_
+    \code
+    const byte* data; // The data to be hashed
+    ....
+    RipeMd md;
+    int ret;
+    ret = wc_InitRipeMd(&md);
+    if (ret == 0) {
+    ret = wc_RipeMdUpdate(&md, plain, sizeof(plain));
+    if (ret != 0) {
+	// Failure case …
+    \endcode
+    
+    \sa wc_InitRipeMd
+    \sa wc_RipeMdFinal
+*/
+WOLFSSL_API int wc_RipeMdUpdate(RipeMd*, const byte*, word32);
+/*!
+    \ingroup RIPEMD 
+    
+    \brief This function copies the computed digest into hash.  If there is a 
+    partial unhashed block, this method will pad the block with 0s, and 
+    include that block’s round in the digest before copying to hash. State 
+    of ripemd is reset.
+    
+    \return 0 Returned on successful execution of the function. The state of 
+    the RipeMd structure has been reset.
+    \return BAD_FUNC_ARG Returned if the RipeMd structure or hash parameters 
+    are NULL.
+    
+    \param ripemd pointer to the ripemd structure to be initialized with 
+    wc_InitRipeMd, and containing hashes from wc_RipeMdUpdate. State will 
+    be reset
+    \param hash buffer to copy digest to.  Should be RIPEMD_DIGEST_SIZE bytes
+    
+    _Example_
+    \code
+    RipeMd md;
+    int ret;
+    byte   digest[RIPEMD_DIGEST_SIZE];
+    const byte* data; // The data to be hashed
+    ... 
+    ret = wc_InitRipeMd(&md);
+    if (ret == 0) {
+    ret = wc_RipeMdUpdate(&md, plain, sizeof(plain));
+    	if (ret != 0) {
+    		// RipeMd Update Failure Case.
+    }
+    ret = wc_RipeMdFinal(&md, digest);
+    if (ret != 0) {
+    	// RipeMd Final Failure Case.
+    }...
+    \endcode
+    
+    \sa none
+*/
+WOLFSSL_API int wc_RipeMdFinal(RipeMd*, byte*);

doc/dox_comments/header_files/rsa.h

@@ -0,0 +1,793 @@
+/*!
+    \ingroup RSA
+    
+    \brief This function initializes a provided RsaKey struct. It also takes 
+    in a heap identifier, for use with user defined memory overrides 
+    (see XMALLOC, XFREE, XREALLOC).
+    
+    \return 0 Returned upon successfully initializing the RSA structure for 
+    use with encryption and decryption
+    \return BAD_FUNC_ARGS Returned if the RSA key pointer evaluates to NULL
+    
+    \param key pointer to the RsaKey structure to initialize
+    \param heap pointer to a heap identifier, for use with memory overrides, 
+    allowing custom handling of memory allocation. This heap will be the 
+    default used when allocating memory for use with this RSA object
+    
+    _Example_
+    \code
+    RsaKey enc;
+    int ret;
+    ret = wc_InitRsaKey(&enc, NULL); // not using heap hint. No custom memory
+    if ( ret != 0 ) {
+    	// error initializing RSA key
+    }
+    \endcode
+    
+    \sa wc_RsaInitCavium
+    \sa wc_FreeRsaKey
+*/
+WOLFSSL_API int  wc_InitRsaKey(RsaKey* key, void* heap);
+
+/*!
+    \ingroup RSA
+    
+    \brief This function frees a provided RsaKey struct using mp_clear.
+    
+    \return 0 Returned upon successfully freeing the key
+    
+    \param key pointer to the RsaKey structure to free
+    
+    _Example_
+    \code
+    RsaKey enc;
+    wc_RsaInitKey(&enc, NULL); // not using heap hint. No custom memory
+    ... set key, do encryption
+
+    wc_FreeRsaKey(&enc);
+    \endcode
+    
+    \sa wc_InitRsaKey
+*/
+WOLFSSL_API int  wc_FreeRsaKey(RsaKey* key);
+
+/*!
+    \ingroup RSA
+    
+    \brief This function encrypts a message from in and stores the result 
+    in out. It requires an initialized public key and a random number 
+    generator. As a side effect, this function will return the bytes written 
+    to out in outLen.
+    
+    \return Success Upon successfully encrypting the input message, returns 
+    the number bytes written to out
+    \return -1 Returned if there is an error during RSA encryption and 
+    hardware acceleration via Cavium is enabled
+    \return BAD_FUNC_ARG Returned if any of the input parameters are invalid
+    \return RSA_BUFFER_E Returned if the output buffer is too small to store 
+    the ciphertext
+    \return RNG_FAILURE_E Returned if there is an error generating a random 
+    block using the provided RNG structure
+    \return MP_INIT_E May be returned if there is an error in the math 
+    library used while encrypting the message
+    \return MP_READ_E May be returned if there is an error in the math 
+    library used while encrypting the message
+    \return MP_CMP_E May be returned if there is an error in the math 
+    library used while encrypting the message
+    \return MP_INVMOD_E May be returned if there is an error in the math 
+    library used while encrypting the message
+    \return MP_EXPTMOD_E May be returned if there is an error in the math 
+    library used while encrypting the message
+    \return MP_MOD_E May be returned if there is an error in the math 
+    library used while encrypting the message
+    \return MP_MUL_E May be returned if there is an error in the math 
+    library used while encrypting the message
+    \return MP_ADD_E May be returned if there is an error in the math 
+    library used while encrypting the message
+    \return MP_MULMOD_E May be returned if there is an error in the math 
+    library used while encrypting the message
+    \return MP_TO_E May be returned if there is an error in the math 
+    library used while encrypting the message
+    \return MP_MEM May be returned if there is an error in the math 
+    library used while encrypting the message
+    \return MP_ZERO_E May be returned if there is an error in the math 
+    library used while encrypting the message
+    
+    \param in pointer to a buffer containing the input message to encrypt
+    \param inLen the length of the message to encrypt
+    \param out pointer to the buffer in which to store the output ciphertext
+    \param outLen the length of the output buffer
+    \param key pointer to the RsaKey structure containing the public 
+    key to use for encryption
+    \param rng The RNG structure with which to generate random block padding
+    
+    _Example_
+    \code
+    RsaKey pub;
+    int ret = 0;
+    byte n[] = { // initialize with received n component of public key };
+    byte e[] = { // initialize with received e component of public key };
+    byte msg[] = { // initialize with plaintext of message to encrypt };
+    byte cipher[256]; // 256 bytes is large enough to store 2048 bit RSA 
+    ciphertext
+    
+    wc_InitRsaKey(&pub, NULL); // not using heap hint. No custom memory
+    wc_RsaPublicKeyDecodeRaw(n, sizeof(n), e, sizeof(e), &pub);
+    // initialize with received public key parameters
+    ret = wc_RsaPublicEncrypt(msg, sizeof(msg), out, sizeof(out), &pub, &rng);
+    if ( ret != 0 ) {
+    	// error encrypting message
+    }
+    \endcode
+    
+    \sa wc_RsaPrivateDecrypt
+*/
+WOLFSSL_API int  wc_RsaPublicEncrypt(const byte* in, word32 inLen, byte* out,
+                                 word32 outLen, RsaKey* key, WC_RNG* rng);
+
+/*!
+    \ingroup RSA
+    
+    \brief This functions is utilized by the wc_RsaPrivateDecrypt function 
+    for decrypting.
+    
+    \return Success Length of decrypted data.
+    \return RSA_PAD_E RsaUnPad error, bad formatting
+    
+    \param in The byte array to be decrypted.
+    \param inLen The length of in.
+    \param out The byte array for the decrypted data to be stored.
+    \param key The key to use for decryption.
+    
+    _Example_
+    \code
+    none
+    \endcode
+    
+    \sa wc_RsaPrivateDecrypt
+*/
+WOLFSSL_API int  wc_RsaPrivateDecryptInline(byte* in, word32 inLen, byte** out,
+                                        RsaKey* key);
+
+/*!
+    \ingroup RSA
+    
+    \brief This functions provides private RSA decryption.
+    
+    \return Success length of decrypted data.
+    \return MEMORY_E -125, out of memory error
+    \return BAD_FUNC_ARG -173, Bad function argument provided
+
+    \param in The byte array to be decrypted.
+    \param inLen The length of in.
+    \param out The byte array for the decrypted data to be stored.
+    \param outLen The length of out.
+    \param key The key to use for decryption.
+    
+    _Example_
+    \code
+    ret = wc_RsaPublicEncrypt(in, inLen, out, sizeof(out), &key, &rng);
+    if (ret < 0) {
+        return -1;
+    }
+    ret = wc_RsaPrivateDecrypt(out, ret, plain, sizeof(plain), &key);
+    if (ret < 0) {
+        return -1;
+    }
+    \endcode
+
+    \sa RsaUnPad
+    \sa wc_RsaFunction
+    \sa wc_RsaPrivateDecryptInline
+*/
+WOLFSSL_API int  wc_RsaPrivateDecrypt(const byte* in, word32 inLen, byte* out,
+                                  word32 outLen, RsaKey* key);
+
+/*!
+    \ingroup RSA
+    
+    \brief Signs the provided array with the private key.
+    
+    \return RSA_BUFFER_E: -131, RSA buffer error, output too small or 
+    input too large
+    
+    \param in The byte array to be encrypted.
+    \param inLen The length of in.
+    \param out The byte array for the encrypted data to be stored.
+    \param outLen The length of out.
+    \param key The key to use for encryption.
+    \param RNG The RNG struct to use for random number purposes.
+    
+    _Example_
+    \code
+    ret = wc_RsaSSL_Sign(in, inLen, out, sizeof(out), &key, &rng);
+    if (ret < 0) {
+        return -1;
+    }
+    memset(plain, 0, sizeof(plain));
+    ret = wc_RsaSSL_Verify(out, ret, plain, sizeof(plain), &key);
+    if (ret < 0) {
+        return -1;
+    }
+    \endcode
+    
+    \sa wc_RsaPad
+*/
+WOLFSSL_API int  wc_RsaSSL_Sign(const byte* in, word32 inLen, byte* out,
+                            word32 outLen, RsaKey* key, WC_RNG* rng);
+
+/*!
+    \ingroup RSA
+    
+    \brief Used to verify that the message was signed by RSA key.  The output 
+    uses the same byte array as the input.
+    
+    \return >0 Length of text.
+    \return <0 An error occurred.
+    
+    \param in Byte array to be decrypted.
+    \param inLen Length of the buffer input.
+    \param out Pointer to a pointer for decrypted information.
+    \param key RsaKey to use.
+    
+    _Example_
+    \code
+    RsaKey key;
+    WC_WC_RNG rng;
+    int ret = 0;
+    long e = 65537; // standard value to use for exponent
+    wc_InitRsaKey(&key, NULL); // not using heap hint. No custom memory
+    wc_InitRng(&rng);
+    wc_MakeRsaKey(&key, 2048, e, &rng);
+
+    byte in[] = { // Initialize with some RSA encrypted information }
+    byte* out;
+    if(wc_RsaSSL_VerifyInline(in, sizeof(in), &out, &key) < 0)
+    {
+        // handle error
+    }
+    \endcode
+    
+    \sa wc_RsaSSL_Verify
+    \sa wc_RsaSSL_Sign
+*/
+WOLFSSL_API int  wc_RsaSSL_VerifyInline(byte* in, word32 inLen, byte** out,
+                                    RsaKey* key);
+
+/*!
+    \ingroup RSA
+    
+    \brief Used to verify that the message was signed by key.
+    
+    \return Success Length of text on no error.
+    \return MEMORY_E memory exception.
+
+    \param in The byte array to be decrypted.
+    \param inLen The length of in.
+    \param out The byte array for the decrypted data to be stored.
+    \param outLen The length of out.
+    \param key The key to use for verification.
+
+    _Example_
+    \code
+    ret = wc_RsaSSL_Sign(in, inLen, out, sizeof(out), &key, &rng);
+    if (ret < 0) {
+        return -1;
+    }
+    memset(plain, 0, sizeof(plain));
+    ret = wc_RsaSSL_Verify(out, ret, plain, sizeof(plain), &key);
+    if (ret < 0) {
+        return -1;
+    }
+    \endcode
+    
+    \sa wc_RsaSSL_Sign
+*/
+WOLFSSL_API int  wc_RsaSSL_Verify(const byte* in, word32 inLen, byte* out,
+                              word32 outLen, RsaKey* key);
+
+/*!
+    \ingroup RSA
+    
+    \brief Returns the encryption size for the provided key structure.
+    
+    \return Success Encryption size for the provided key structure.
+    
+    \param key The key to use for verification.
+    
+    _Example_
+    \code
+    int sz = wc_RsaEncryptSize(&key);
+    \endcode
+    
+    \sa wc_InitRsaKey
+    \sa wc_InitRsaKey_ex
+    \sa wc_MakeRsaKey
+    \sa XMEMSET
+*/
+WOLFSSL_API int  wc_RsaEncryptSize(RsaKey* key);
+
+/*!
+    \ingroup RSA
+    
+    \brief This function parses a DER-formatted RSA private key, extracts the 
+    private key and stores it in the given RsaKey structure. It also sets the 
+    distance parsed in idx.
+
+    \return 0 Returned upon successfully parsing the private key from the DER 
+    encoded input
+    \return ASN_PARSE_E Returned if there is an error parsing the private key 
+    from the input buffer. This may happen if the input private key is not 
+    properly formatted according to ASN.1 standards
+    \return ASN_RSA_KEY_E Returned if there is an error reading the private 
+    key elements of the RSA key input
+
+    \param input pointer to the buffer containing the DER formatted private 
+    key to decode
+    \param inOutIdx pointer to the index in the buffer at which the key begins 
+    (usually 0). As a side effect of this function, inOutIdx will store the 
+    distance parsed through the input buffer
+    \param key pointer to the RsaKey structure in which to store the decoded 
+    private key
+    \param inSz size of the input buffer
+    
+    _Example_
+    \code
+    RsaKey enc;
+    word32 idx = 0;
+    int ret = 0;
+    byte der[] = { // initialize with DER-encoded RSA private key };
+
+    wc_InitRsaKey(&enc, NULL); // not using heap hint. No custom memory
+    ret = wc_RsaPrivateKeyDecode(der, &idx, &enc, sizeof(der));
+    if( ret != 0 ) {
+    	// error parsing private key 
+    }
+    \endcode
+    
+    \sa wc_RsaPublicKeyDecode
+    \sa wc_MakeRsaKey
+*/
+WOLFSSL_API int  wc_RsaPrivateKeyDecode(const byte* input, word32* inOutIdx,
+                                                               RsaKey*, word32);
+
+/*!
+    \ingroup RSA
+    
+    \brief This function parses a DER-formatted RSA public key, extracts the 
+    public key and stores it in the given RsaKey structure. It also sets the 
+    distance parsed in idx.
+    
+    \return 0 Returned upon successfully parsing the public key from the DER 
+    encoded input
+    \return ASN_PARSE_E Returned if there is an error parsing the public key 
+    from the input buffer. This may happen if the input public key is not 
+    properly formatted according to ASN.1 standards
+    \return ASN_OBJECT_ID_E Returned if the ASN.1 Object ID does not match 
+    that of a RSA public key
+    \return ASN_EXPECT_0_E Returned if the input key is not correctly 
+    formatted according to ASN.1 standards
+    \return ASN_BITSTR_E Returned if the input key is not correctly formatted 
+    according to ASN.1 standards 
+    \return ASN_RSA_KEY_E Returned if there is an error reading the public key 
+    elements of the RSA key input
+
+    \param input pointer to the buffer containing the input DER-encoded RSA 
+    public key to decode
+    \param inOutIdx pointer to the index in the buffer at which the key 
+    begins (usually 0). As a side effect of this function, inOutIdx will 
+    store the distance parsed through the input buffer
+    \param key pointer to the RsaKey structure in which to store the decoded 
+    public key
+    \param inSz size of the input buffer
+
+    _Example_
+    \code
+    RsaKey pub;
+    word32 idx = 0;
+    int ret = 0;
+    byte der[] = { // initialize with DER-encoded RSA public key };
+
+    wc_InitRsaKey(&pub, NULL); // not using heap hint. No custom memory
+    ret = wc_RsaPublicKeyDecode(der, &idx, &pub, sizeof(der));
+    if( ret != 0 ) {
+    	// error parsing public key 
+    }
+    \endcode
+    
+    \sa wc_RsaPublicKeyDecodeRaw
+*/
+WOLFSSL_API int  wc_RsaPublicKeyDecode(const byte* input, word32* inOutIdx,
+                                                               RsaKey*, word32);
+
+/*!
+    \ingroup RSA
+    
+    \brief This function decodes the raw elements of an RSA public key, taking 
+    in the public modulus (n) and exponent (e). It stores these raw elements 
+    in the provided RsaKey structure, allowing one to use them in the 
+    encryption/decryption process.
+    
+    \return 0 Returned upon successfully decoding the raw elements of the 
+    public key into the RsaKey structure
+    \return BAD_FUNC_ARG Returned if any of the input arguments evaluates to 
+    NULL
+    \return MP_INIT_E Returned if there is an error initializing an integer 
+    for use with the multiple precision integer (mp_int) library
+    \return ASN_GETINT_E Returned if there is an error reading one of the 
+    provided RSA key elements, n or e
+
+    \param n pointer to a buffer containing the raw modulus parameter of the 
+    public RSA key
+    \param nSz size of the buffer containing n
+    \param e pointer to a buffer containing the raw exponent parameter of 
+    the public RSA key
+    \param eSz size of the buffer containing e
+    \param key pointer to the RsaKey struct to initialize with the provided 
+    public key elements
+
+    _Example_
+    \code
+    RsaKey pub;
+    int ret = 0;
+    byte n[] = { // initialize with received n component of public key };
+    byte e[] = { // initialize with received e component of public key };
+
+    wc_InitRsaKey(&pub, NULL); // not using heap hint. No custom memory
+    ret = wc_RsaPublicKeyDecodeRaw(n, sizeof(n), e, sizeof(e), &pub);
+    if( ret != 0 ) {
+    	// error parsing public key elements
+    }
+    \endcode
+    
+    \sa wc_RsaPublicKeyDecode
+*/
+WOLFSSL_API int  wc_RsaPublicKeyDecodeRaw(const byte* n, word32 nSz,
+                                        const byte* e, word32 eSz, RsaKey* key);
+
+/*!
+    \ingroup RSA
+    
+    \brief This function converts an RsaKey key to DER format.  The result is 
+    written to output and it returns the number of bytes written.
+    
+    \return 0 Success
+    \return BAD_FUNC_ARG Returned if key or output is null, or if key->type 
+    is not RSA_PRIVATE, or if inLen isn't large enough for output buffer.
+    \return MEMORY_E Returned if there is an error allocating memory.
+    
+    \param key Initialized RsaKey structure.
+    \param output Pointer to output buffer.
+    \param inLen Size of output buffer.
+    
+    _Example_
+    \code
+    byte* der;
+    // Allocate memory for der
+    int derSz = // Amount of memory allocated for der;
+    RsaKey key;
+    WC_WC_RNG rng;
+    long e = 65537; // standard value to use for exponent
+    ret = wc_MakeRsaKey(&key, 2048, e, &rng); // generate 2048 bit long 
+    private key
+    wc_InitRsaKey(&key, NULL);
+    wc_InitRng(&rng);
+    if(wc_RsaKeyToDer(&key, der, derSz) != 0)
+    {
+        // Handle the error thrown
+    }
+    \endcode
+    
+    \sa wc_RsaKeyToPublicDer
+    \sa wc_InitRsaKey
+    \sa wc_MakeRsaKey
+    \sa wc_InitRng
+*/
+    WOLFSSL_API int wc_RsaKeyToDer(RsaKey*, byte* output, word32 inLen);
+
+/*!
+    \ingroup RSA
+    
+    \brief This function performs RSA encrypt while allowing the choice of 
+    which padding to use.
+    
+    \return size On successfully encryption the size of the encrypted buffer 
+    is returned
+    \return RSA_BUFFER_E RSA buffer error, output too small or input too large
+    
+    \param in pointer to the buffer for encryption
+    \param inLen length of the buffer to encrypt
+    \param out encrypted msg created
+    \param outLen length of buffer available to hold encrypted msg
+    \param key initialized RSA key struct
+    \param rng initialized WC_RNG struct
+    \param type type of padding to use (WC_RSA_OAEP_PAD or WC_RSA_PKCSV15_PAD)
+    \param hash type of hash to use (choices can be found in hash.h)
+    \param mgf type of mask generation function to use
+    \param label an optional label to associate with encrypted message
+    \param labelSz size of the optional label used
+
+    _Example_
+    \code
+    WC_WC_WC_RNG rng;
+    RsaKey key;
+    byte in[] = “I use Turing Machines to ask questions”
+    byte out[256];
+    int ret;
+    …
+
+    ret = wc_RsaPublicEncrypt_ex(in, sizeof(in), out, sizeof(out), &key, &rng, 
+    WC_RSA_OAEP_PAD, WC_HASH_TYPE_SHA, WC_MGF1SHA1, NULL, 0);
+    if (ret < 0) {
+	    //handle error
+    }
+    \endcode
+    
+    \sa wc_RsaPublicEncrypt
+    \sa wc_RsaPrivateDecrypt_ex
+*/
+WOLFSSL_API int  wc_RsaPublicEncrypt_ex(const byte* in, word32 inLen, byte* out,
+                   word32 outLen, RsaKey* key, WC_RNG* rng, int type,
+                   enum wc_HashType hash, int mgf, byte* label, word32 lableSz);
+
+/*!
+    \ingroup RSA
+    
+    \brief This function uses RSA to decrypt a message and gives the 
+    option of what padding type.
+    
+    \return size On successful decryption, the size of the decrypted message 
+    is returned.
+    \return MEMORY_E Returned if not enough memory on system to malloc a 
+    needed array.
+    \return BAD_FUNC_ARG Returned if a bad argument was passed into the 
+    function.
+    
+    \param in pointer to the buffer for decryption
+    \param inLen length of the buffer to decrypt
+    \param out decrypted msg created
+    \param outLen length of buffer available to hold decrypted msg
+    \param key initialized RSA key struct
+    \param type type of padding to use (WC_RSA_OAEP_PAD or WC_RSA_PKCSV15_PAD)
+    \param hash type of hash to use (choices can be found in hash.h)
+    \param mgf type of mask generation function to use
+    \param label an optional label to associate with encrypted message
+    \param labelSz size of the optional label used
+
+    _Example_
+    \code
+    WC_WC_WC_RNG rng;
+    RsaKey key;
+    byte in[] = “I use Turing Machines to ask questions”
+    byte out[256];
+    byte plain[256];
+    int ret;
+    …
+    ret = wc_RsaPublicEncrypt_ex(in, sizeof(in), out, sizeof(out), &key, 
+    &rng, WC_RSA_OAEP_PAD, WC_HASH_TYPE_SHA, WC_MGF1SHA1, NULL, 0);
+    if (ret < 0) {
+	    //handle error
+    }
+    …
+    ret = wc_RsaPrivateDecrypt_ex(out, ret, plain, sizeof(plain), &key, 
+    WC_RSA_OAEP_PAD, WC_HASH_TYPE_SHA, WC_MGF1SHA1, NULL, 0);
+    
+    if (ret < 0) {
+	    //handle error
+    }
+    \endcode
+    
+    \sa none
+*/
+WOLFSSL_API int  wc_RsaPrivateDecrypt_ex(const byte* in, word32 inLen,
+                   byte* out, word32 outLen, RsaKey* key, int type,
+                   enum wc_HashType hash, int mgf, byte* label, word32 lableSz);
+
+/*!
+    \ingroup RSA
+    
+    \brief This function uses RSA to decrypt a message inline and gives the 
+    option of what padding type. The in buffer will contain the decrypted 
+    message after being called and the out byte pointer will point to the 
+    location in the “in” buffer where the plain text is.
+    
+    \return size On successful decryption, the size of the decrypted message 
+    is returned.
+    \return MEMORY_E: Returned if not enough memory on system to malloc a 
+    needed array.
+    \return RSA_PAD_E: Returned if an error in the padding was encountered.
+    \return BAD_PADDING_E: Returned if an error happened during parsing past 
+    padding.
+    \return BAD_FUNC_ARG: Returned if a bad argument was passed into the 
+    function.
+
+    \param in pointer to the buffer for decryption
+    \param inLen length of the buffer to decrypt
+    \param out pointer to location of decrypted message in “in” buffer
+    \param key initialized RSA key struct
+    \param type type of padding to use (WC_RSA_OAEP_PAD or WC_RSA_PKCSV15_PAD)
+    \param hash type of hash to use (choices can be found in hash.h)
+    \param mgf type of mask generation function to use
+    \param label an optional label to associate with encrypted message
+    \param labelSz size of the optional label used
+
+    _Example_
+    \code
+    WC_WC_WC_RNG rng;
+    RsaKey key;
+    byte in[] = “I use Turing Machines to ask questions”
+    byte out[256];
+    byte* plain;
+    int ret;
+    …
+    ret = wc_RsaPublicEncrypt_ex(in, sizeof(in), out, sizeof(out), &key, 
+    &rng, WC_RSA_OAEP_PAD, WC_HASH_TYPE_SHA, WC_MGF1SHA1, NULL, 0);
+
+    if (ret < 0) {
+	    //handle error
+    }
+    …
+    ret = wc_RsaPrivateDecryptInline_ex(out, ret, &plain, &key, 
+    WC_RSA_OAEP_PAD, WC_HASH_TYPE_SHA, WC_MGF1SHA1, NULL, 0);
+
+    if (ret < 0) {
+	    //handle error
+    }
+    \endcode
+    
+    \sa none
+*/
+WOLFSSL_API int  wc_RsaPrivateDecryptInline_ex(byte* in, word32 inLen,
+                      byte** out, RsaKey* key, int type, enum wc_HashType hash,
+                      int mgf, byte* label, word32 lableSz);
+
+/*!
+    \ingroup RSA
+    
+    \brief Flattens the RsaKey structure into individual elements (e, n) 
+    used for the RSA algorithm.
+    
+    \return 0 Returned if the function executed normally, without error.
+    \return BAD_FUNC_ARG: Returned if any of the parameters are passed in 
+    with a null value.
+    \return RSA_BUFFER_E: Returned if the e or n buffers passed in are not 
+    the correct size.
+    \return MP_MEM: Returned if an internal function has memory errors.
+    \return MP_VAL: Returned if an internal function argument is not valid.
+    
+    \param key The key to use for verification.
+    \param e a buffer for the value of e. e is a large positive integer in 
+    the RSA modular arithmetic operation.
+    \param eSz the size of the e buffer.
+    \param n a buffer for the value of n. n is a large positive integer in 
+    the RSA modular arithmetic operation.
+    \param nSz the size of the n buffer.
+
+    _Example_
+    \code
+    Rsa key; // A valid RSA key.
+    byte e[ buffer sz E.g. 256 ];
+    byte n[256];
+    int ret;
+    word32 eSz = sizeof(e);
+    word32 nSz = sizeof(n);
+    ...
+    ret = wc_RsaFlattenPublicKey(&key, e, &eSz, n, &nSz);
+    if (ret != 0) {
+    	// Failure case.
+    }
+    \endcode
+    
+    \sa wc_InitRsaKey
+    \sa wc_InitRsaKey_ex
+    \sa wc_MakeRsaKey
+    \sa XMEMSET
+*/
+WOLFSSL_API int  wc_RsaFlattenPublicKey(RsaKey*, byte*, word32*, byte*,
+                                                                       word32*);
+
+/*!
+    \ingroup RSA
+    
+    \brief Convert Rsa Public key to DER format.  Writes to output, and 
+    returns count of bytes written.
+    
+    \return >0 Success, number of bytes written.
+    \return BAD_FUNC_ARG Returned if key or output is null.
+    \return MEMORY_E Returned when an error allocating memory occurs.
+    \return <0 Error
+
+    \param key The RSA key structure to convert.
+    \param output Output buffer to hold DER.
+    \param inLen Length of buffer.
+    
+    _Example_
+    \code
+    RsaKey key;
+
+    wc_RsaInitKey(&key, NULL);
+    // Use key
+
+    int BUFFER_SIZE = // Some adequate size for the buffer
+    byte output[BUFFER_SIZE];
+    if(wc_RsaKeyToPublicDer(&key, output, sizeof(output)) != 0)
+    {
+        // Handle Error
+    }
+    \endcode
+    
+    \sa wc_RsaKeyToPublicDer
+    \sa wc_RsaInitKey
+*/
+    WOLFSSL_API int wc_RsaKeyToPublicDer(RsaKey*, byte* output, word32 inLen);
+
+/*!
+    \ingroup RSA
+    
+    \brief This function generates a RSA private key of length size (in bits) 
+    and given exponent (e). It then stores this key in the provided RsaKey 
+    structure, so that it may be used for encryption/decryption. A secure 
+    number to use for e is 65537. size is required to be greater than 
+    RSA_MIN_SIZE and less than RSA_MAX_SIZE. For this function to be 
+    available, the option WOLFSSL_KEY_GEN must be enabled at compile time. 
+    This can be accomplished with --enable-keygen if using ./configure.
+
+    \return 0 Returned upon successfully generating a RSA private key
+    \return BAD_FUNC_ARG Returned if any of the input arguments are NULL, 
+    the size parameter falls outside of the necessary bounds, or e is 
+    incorrectly chosen
+    \return RNG_FAILURE_E Returned if there is an error generating a random 
+    block using the provided RNG structure
+    \return MP_INIT_E
+    \return MP_READ_E May be May be returned if there is an error in the math 
+    library used while generating the RSA key returned if there is an error 
+    in the math library used while generating the RSA key
+    \return MP_CMP_E May be returned if there is an error in the math library 
+    used while generating the RSA key
+    \return MP_INVMOD_E May be returned if there is an error in the math 
+    library used while generating the RSA key
+    \return MP_EXPTMOD_E May be returned if there is an error in the math 
+    library used while generating the RSA key
+    \return MP_MOD_E May be returned if there is an error in the math 
+    library used while generating the RSA key
+    \return MP_MUL_E May be returned if there is an error in the math 
+    library used while generating the RSA key
+    \return MP_ADD_E May be returned if there is an error in the math 
+    library used while generating the RSA key
+    \return MP_MULMOD_E May be returned if there is an error in the math 
+    library used while generating the RSA key
+    \return MP_TO_E May be returned if there is an error in the math 
+    library used while generating the RSA key
+    \return MP_MEM May be returned if there is an error in the math 
+    library used while generating the RSA key
+    \return MP_ZERO_E May be returned if there is an error in the math 
+    library used while generating the RSA key
+    
+    \param key pointer to the RsaKey structure in which to store the 
+    generated private key
+    \param size desired keylenth, in bits. Required to be greater than 
+    RSA_MIN_SIZE and less than RSA_MAX_SIZE
+    \param e exponent parameter to use for generating the key. A secure 
+    choice is 65537
+    \param rng pointer to an RNG structure to use for random number generation 
+    while making the ke
+
+    _Example_
+    \code
+    RsaKey priv;
+    WC_WC_RNG rng;
+    int ret = 0;
+    long e = 65537; // standard value to use for exponent
+
+    wc_InitRsaKey(&priv, NULL); // not using heap hint. No custom memory
+    wc_InitRng(&rng);
+    // generate 2048 bit long private key
+    ret = wc_MakeRsaKey(&priv, 2048, e, &rng); 
+    if( ret != 0 ) {
+	    // error generating private key
+    }
+    \endcode
+    
+    \sa none
+*/
+    WOLFSSL_API int wc_MakeRsaKey(RsaKey* key, int size, long e, WC_RNG* rng);

doc/dox_comments/header_files/sha.h

@@ -0,0 +1,141 @@
+/*!
+    \ingroup SHA
+    
+    \brief This function initializes SHA. This is automatically called 
+    by wc_ShaHash.
+    
+    \return 0 Returned upon successfully initializing
+    
+    \param sha pointer to the sha structure to use for encryption
+    
+    _Example_
+    \code
+    Sha sha[1];
+    if ((ret = wc_InitSha(sha)) != 0) {
+       WOLFSSL_MSG("wc_InitSha failed");
+    }
+    else {
+       wc_ShaUpdate(sha, data, len);
+       wc_ShaFinal(sha, hash);
+    }
+    \endcode
+    
+    \sa wc_ShaHash
+    \sa wc_ShaUpdate
+    \sa wc_ShaFinal
+*/
+WOLFSSL_API int wc_InitSha(wc_Sha*);
+/*!
+    \ingroup SHA
+    
+    \brief Can be called to continually hash the provided byte array of 
+    length len.
+    
+    \return 0 Returned upon successfully adding the data to the digest.
+    
+    \param sha pointer to the sha structure to use for encryption
+    \param data the data to be hashed
+    \param len length of data to be hashed
+    
+    _Example_
+    \code
+    Sha sha[1];
+    byte data[] = { // Data to be hashed };
+    word32 len = sizeof(data);
+
+    if ((ret = wc_InitSha(sha)) != 0) {
+       WOLFSSL_MSG("wc_InitSha failed");
+    }
+    else {
+       wc_ShaUpdate(sha, data, len);
+       wc_ShaFinal(sha, hash);
+    }
+    \endcode
+    
+    \sa wc_ShaHash
+    \sa wc_ShaFinal
+    \sa wc_InitSha
+*/
+WOLFSSL_API int wc_ShaUpdate(wc_Sha*, const byte*, word32);
+/*!
+    \ingroup SHA
+    
+    \brief Finalizes hashing of data. Result is placed into hash. 
+    Resets state of sha struct.
+    
+    \return 0 Returned upon successfully finalizing.
+    
+    \param sha pointer to the sha structure to use for encryption
+    \param hash Byte array to hold hash value.
+    
+    _Example_
+    \code
+    Sha sha[1];
+    byte data[] = { Data to be hashed };
+    word32 len = sizeof(data);
+
+    if ((ret = wc_InitSha(sha)) != 0) {
+       WOLFSSL_MSG("wc_InitSha failed");
+    }
+    else {
+       wc_ShaUpdate(sha, data, len);
+       wc_ShaFinal(sha, hash);
+    }
+    \endcode
+    
+    \sa wc_ShaHash
+    \sa wc_InitSha
+    \sa wc_ShaGetHash
+*/
+WOLFSSL_API int wc_ShaFinal(wc_Sha*, byte*);
+/*!
+    \ingroup SHA
+    
+    \brief Used to clean up memory used by an initialized Sha struct.
+    Note: this is only supported if you have WOLFSSL_TI_HASH defined.
+    
+    \return No returns.
+    
+    \param sha Pointer to the Sha struct to free.
+    
+    _Example_
+    \code
+    Sha sha;
+    wc_InitSha(&sha);
+    // Use sha
+    wc_ShaFree(&sha);
+    \endcode
+    
+    \sa wc_InitSha
+    \sa wc_ShaUpdate
+    \sa wc_ShaFinal
+*/
+WOLFSSL_API void wc_ShaFree(wc_Sha*);
+/*!
+    \ingroup SHA
+    
+    \brief Gets hash data. Result is placed into hash.  Does not reset state 
+    of sha struct.
+    
+    \return 0 Returned upon successfully finalizing.
+    
+    \param sha pointer to the sha structure to use for encryption
+    \param hash Byte array to hold hash value.
+    
+    _Example_
+    \code
+    Sha sha[1];
+    if ((ret = wc_InitSha(sha)) != 0) {
+    WOLFSSL_MSG("wc_InitSha failed");
+    }
+    else {
+        wc_ShaUpdate(sha, data, len);
+        wc_ShaGetHash(sha, hash);
+    }
+    \endcode
+    
+    \sa wc_ShaHash
+    \sa wc_ShaFinal
+    \sa wc_InitSha
+*/
+WOLFSSL_API int wc_ShaGetHash(wc_Sha*, byte*);

doc/dox_comments/header_files/sha256.h

@@ -0,0 +1,239 @@
+/*!
+    \ingroup SHA
+    
+    \brief This function initializes SHA256. This is automatically 
+    called by wc_Sha256Hash.
+    
+    \return 0 Returned upon successfully initializing
+    
+    \param sha256 pointer to the sha256 structure to use for encryption
+    
+    _Example_
+    \code
+    Sha256 sha256[1];
+    if ((ret = wc_InitSha356(sha256)) != 0) {
+        WOLFSSL_MSG("wc_InitSha256 failed");
+    }
+    else {
+        wc_Sha256Update(sha256, data, len);
+        wc_Sha256Final(sha256, hash);
+    }
+    \endcode
+    
+    \sa wc_Sha256Hash
+    \sa wc_Sha256Update
+    \sa wc_Sha256Final
+*/
+WOLFSSL_API int wc_InitSha256(wc_Sha256*);
+/*!
+    \ingroup SHA
+    
+    \brief Can be called to continually hash the provided byte 
+    array of length len.
+    
+    \return 0 Returned upon successfully adding the data to the digest.
+    
+    \param sha256 pointer to the sha256 structure to use for encryption
+    \param data the data to be hashed
+    \param len length of data to be hashed
+    
+    _Example_
+    \code
+    Sha256 sha256[1];
+    byte data[] = { Data to be hashed };
+    word32 len = sizeof(data);
+
+    if ((ret = wc_InitSha256(sha256)) != 0) {
+       WOLFSSL_MSG("wc_InitSha256 failed");
+    }
+    else {
+        wc_Sha256Update(sha256, data, len);
+        wc_Sha256Final(sha256, hash);
+    }
+    \endcode
+    
+    \sa wc_Sha256Hash
+    \sa wc_Sha256Final
+    \sa wc_InitSha256
+*/
+WOLFSSL_API int wc_Sha256Update(wc_Sha256*, const byte*, word32);
+/*!
+    \ingroup SHA
+    
+    \brief Finalizes hashing of data. Result is placed into hash. 
+    Resets state of sha256 struct.
+    
+    \return 0 Returned upon successfully finalizing.
+    
+    \param sha256 pointer to the sha256 structure to use for encryption
+    \param hash Byte array to hold hash value.
+    
+    _Example_
+    \code
+    Sha256 sha256[1];
+    byte data[] = { Data to be hashed };
+    word32 len = sizeof(data);
+
+    if ((ret = wc_InitSha356(sha256)) != 0) {
+       WOLFSSL_MSG("wc_InitSha256 failed");
+    }
+    else {
+       wc_Sha256Update(sha256, data, len);
+       wc_Sha256Final(sha256, hash);
+    }
+    \endcode
+    
+    \sa wc_Sha256Hash
+    \sa wc_Sha256GetHash
+    \sa wc_InitSha256
+*/
+WOLFSSL_API int wc_Sha256Final(wc_Sha256*, byte*);
+/*!
+    \ingroup SHA
+    
+    \brief Resets the Sha256 structure.  Note: this is only supported 
+    if you have WOLFSSL_TI_HASH defined.
+    
+    \return none No returns.
+    
+    \param sha256 Pointer to the sha256 structure to be freed.
+
+    _Example_
+    \code
+    Sha256 sha256;
+    byte data[] = { Data to be hashed };
+    word32 len = sizeof(data);
+
+    if ((ret = wc_InitSha256(&sha256)) != 0) {
+        WOLFSSL_MSG("wc_InitSha256 failed");
+    }
+    else {
+        wc_Sha256Update(&sha256, data, len);
+        wc_Sha256Final(&sha256, hash);
+        wc_Sha256Free(&sha256);
+    }
+    \endcode
+    
+    \sa wc_InitSha256
+    \sa wc_Sha256Update
+    \sa wc_Sha256Final
+*/
+WOLFSSL_API void wc_Sha256Free(wc_Sha256*);
+/*!
+    \ingroup SHA
+    
+    \brief Gets hash data. Result is placed into hash.  Does not 
+    reset state of sha256 struct.
+    
+    \return 0 Returned upon successfully finalizing.
+    
+    \param sha256 pointer to the sha256 structure to use for encryption
+    \param hash Byte array to hold hash value.
+    
+    _Example_
+    \code
+    Sha256 sha256[1];
+    if ((ret = wc_InitSha356(sha256)) != 0) {
+       WOLFSSL_MSG("wc_InitSha256 failed");
+    }
+    else {
+       wc_Sha256Update(sha256, data, len);
+       wc_Sha256GetHash(sha256, hash);
+    }
+    \endcode
+    
+    \sa wc_Sha256Hash
+    \sa wc_Sha256Final
+    \sa wc_InitSha256
+*/
+WOLFSSL_API int wc_Sha256GetHash(wc_Sha256*, byte*);
+/*!
+    \ingroup SHA
+    
+    \brief Used to initialize a Sha224 struct.
+    
+    \return 0 Success
+    \return 1 Error returned because sha224 is null.
+    
+    \param sha224 Pointer to a Sha224 struct to initialize.
+    
+    _Example_
+    \code
+    Sha224 sha224;
+    if(wc_InitSha224(&sha224) != 0)
+    {
+        // Handle error
+    }
+    \endcode
+    
+    \sa wc_Sha224Hash
+    \sa wc_Sha224Update
+    \sa wc_Sha224Final
+*/
+WOLFSSL_API int wc_InitSha224(wc_Sha224*);
+/*!
+    \ingroup SHA
+    
+    \brief Can be called to continually hash the provided byte array 
+    of length len.
+    
+    \return 0 Success
+    \return 1 Error returned if function fails.
+    \return BAD_FUNC_ARG Error returned if sha224 or data is null.
+
+    \param sha224 Pointer to the Sha224 structure to use for encryption.
+    \param data Data to be hashed.
+    \param len Length of data to be hashed.
+
+    _Example_
+    \code
+    Sha224 sha224;
+    byte data[] = { /* Data to be hashed };
+    word32 len = sizeof(data);
+
+    if ((ret = wc_InitSha224(&sha224)) != 0) {
+       WOLFSSL_MSG("wc_InitSha224 failed");
+    }
+    else {
+      wc_Sha224Update(&sha224, data, len);
+      wc_Sha224Final(&sha224, hash);
+    }
+    \endcode
+    
+    \sa wc_InitSha224
+    \sa wc_Sha224Final
+    \sa wc_Sha224Hash
+*/
+WOLFSSL_API int wc_Sha224Update(wc_Sha224*, const byte*, word32);
+/*!
+    \ingroup SHA
+    
+    \brief Finalizes hashing of data. Result is placed into hash. 
+    Resets state of sha224 struct.
+    
+    \return 0 Success
+    \return <0 Error
+    
+    \param sha224 pointer to the sha224 structure to use for encryption
+    \param hash Byte array to hold hash value.
+    
+    _Example_
+    \code
+    Sha224 sha224;
+    byte data[] = { /* Data to be hashed };
+    word32 len = sizeof(data);
+
+    if ((ret = wc_InitSha224(&sha224)) != 0) {
+        WOLFSSL_MSG("wc_InitSha224 failed");
+    }
+    else {
+        wc_Sha224Update(&sha224, data, len);
+        wc_Sha224Final(&sha224, hash);
+    }
+    \endcode
+    
+    \sa wc_InitSha224
+    \sa wc_Sha224Hash
+    \sa wc_Sha224Update
+*/
+WOLFSSL_API int wc_Sha224Final(wc_Sha224*, byte*);

doc/dox_comments/header_files/sha512.h

@@ -0,0 +1,178 @@
+/*!
+    \ingroup SHA
+    
+    \brief This function initializes SHA512. This is automatically called 
+    by wc_Sha512Hash.
+    
+    \return 0 Returned upon successfully initializing
+    
+    \param sha512 pointer to the sha512 structure to use for encryption
+    
+    _Example_
+    \code
+    Sha512 sha512[1];
+    if ((ret = wc_InitSha512(sha512)) != 0) {
+       WOLFSSL_MSG("wc_InitSha512 failed");
+    }
+    else {
+       wc_Sha512Update(sha512, data, len);
+       wc_Sha512Final(sha512, hash);
+    }
+    \endcode
+    
+    \sa wc_Sha512Hash
+    \sa wc_Sha512Update
+    \sa wc_Sha512Final
+*/
+WOLFSSL_API int wc_InitSha512(wc_Sha512*);
+/*!
+    \ingroup SHA
+    
+    \brief Can be called to continually hash the provided byte array 
+    of length len.
+    
+    \return 0 Returned upon successfully adding the data to the digest.
+    
+    \param sha512 pointer to the sha512 structure to use for encryption
+    \param data the data to be hashed
+    \param len length of data to be hashed
+    
+    _Example_
+    \code
+    Sha512 sha512[1];
+    byte data[] = { Data to be hashed };
+    word32 len = sizeof(data);
+
+    if ((ret = wc_InitSha512(sha512)) != 0) {
+       WOLFSSL_MSG("wc_InitSha512 failed");
+    }
+    else {
+       wc_Sha512Update(sha512, data, len);
+       wc_Sha512Final(sha512, hash);
+    }
+    \endcode 
+    
+    \sa wc_Sha512Hash
+    \sa wc_Sha512Final
+    \sa wc_InitSha512
+*/
+WOLFSSL_API int wc_Sha512Update(wc_Sha512*, const byte*, word32);
+/*!
+    \ingroup SHA
+    
+    \brief Finalizes hashing of data. Result is placed into hash.
+    
+    \return 0 Returned upon successfully finalizing the hash.
+    
+    \param sha512 pointer to the sha512 structure to use for encryption
+    \param hash Byte array to hold hash value.
+    
+    _Example_
+    \code
+    Sha512 sha512[1];
+    byte data[] = { Data to be hashed };
+    word32 len = sizeof(data);
+
+    if ((ret = wc_InitSha512(sha512)) != 0) {
+        WOLFSSL_MSG("wc_InitSha512 failed");
+    }
+    else {
+       wc_Sha512Update(sha512, data, len);
+       wc_Sha512Final(sha512, hash);
+    }
+    \endcode
+    
+    \sa wc_Sha512Hash
+    \sa wc_Sha512Final
+    \sa wc_InitSha512
+*/
+WOLFSSL_API int wc_Sha512Final(wc_Sha512*, byte*);
+/*!
+    \ingroup SHA
+    
+    \brief This function initializes SHA384. This is automatically called 
+    by wc_Sha384Hash.
+    
+    \return 0 Returned upon successfully initializing
+    
+    \param sha384 pointer to the sha384 structure to use for encryption
+    
+    _Example_
+    \code
+    Sha384 sha384[1];
+    if ((ret = wc_InitSha384(sha384)) != 0) {
+       WOLFSSL_MSG("wc_InitSha384 failed");
+    }
+    else {
+       wc_Sha384Update(sha384, data, len);
+       wc_Sha384Final(sha384, hash);
+    }
+    \endcode
+    
+    \sa wc_Sha384Hash
+    \sa wc_Sha384Update
+    \sa wc_Sha384Final
+*/
+WOLFSSL_API int wc_InitSha384(wc_Sha384*);
+/*!
+    \ingroup SHA
+    
+    \brief Can be called to continually hash the provided byte array 
+    of length len.
+    
+    \return 0 Returned upon successfully adding the data to the digest.
+    
+    \param sha384 pointer to the sha384 structure to use for encryption
+    \param data the data to be hashed
+    \param len length of data to be hashed
+
+    _Example_
+    \code
+    Sha384 sha384[1];
+    byte data[] = { Data to be hashed };
+    word32 len = sizeof(data);
+
+    if ((ret = wc_InitSha384(sha384)) != 0) {
+       WOLFSSL_MSG("wc_InitSha384 failed");
+    }
+    else {
+       wc_Sha384Update(sha384, data, len);
+       wc_Sha384Final(sha384, hash);
+    }
+    \endcode
+    
+    \sa wc_Sha384Hash
+    \sa wc_Sha384Final
+    \sa wc_InitSha384
+*/
+WOLFSSL_API int wc_Sha384Update(wc_Sha384*, const byte*, word32);
+/*!
+    \ingroup SHA
+    
+    \brief Finalizes hashing of data. Result is placed into hash.
+    
+    \return 0 Returned upon successfully finalizing.
+    
+    \param sha384 pointer to the sha384 structure to use for encryption
+    \param hash Byte array to hold hash value.
+    
+    _Example_
+    \code
+    Sha384 sha384[1];
+    byte data[] = { Data to be hashed };
+    word32 len = sizeof(data);
+
+    if ((ret = wc_InitSha384(sha384)) != 0) {
+       WOLFSSL_MSG("wc_InitSha384 failed");
+    }
+    else {
+       wc_Sha384Update(sha384, data, len);
+       wc_Sha384Final(sha384, hash);
+    }
+    \endcode
+    
+    \sa wc_Sha384Hash
+    \sa wc_Sha384Final
+    \sa wc_InitSha384
+*/
+WOLFSSL_API int wc_Sha384Final(wc_Sha384*, byte*);

doc/dox_comments/header_files/signature.h

@@ -0,0 +1,145 @@
+/*!
+    \ingroup Signature
+    
+    \brief This function returns the maximum size of the resulting signature.
+    
+    \return Returns SIG_TYPE_E if sig_type is not supported. Returns 
+    BAD_FUNC_ARG if sig_type was invalid. A positive return value indicates 
+    the maximum size of a signature.
+    
+    \param sig_type A signature type enum value such as 
+    WC_SIGNATURE_TYPE_ECC or WC_SIGNATURE_TYPE_RSA.
+    \param key Pointer to a key structure such as ecc_key or RsaKey.
+    \param key_len Size of the key structure.
+    
+    _Example_
+    \code
+    // Get signature length
+    enum wc_SignatureType sig_type = WC_SIGNATURE_TYPE_ECC;
+    ecc_key eccKey;
+    word32 sigLen;
+    wc_ecc_init(&eccKey);
+    sigLen = wc_SignatureGetSize(sig_type, &eccKey, sizeof(eccKey));
+    if (sigLen > 0) {
+    	// Success
+    }
+    \endcode
+    
+    \sa wc_HashGetDigestSize
+    \sa wc_SignatureGenerate
+    \sa wc_SignatureVerify
+*/
+WOLFSSL_API int wc_SignatureGetSize(enum wc_SignatureType sig_type,
+    const void* key, word32 key_len);
+/*!
+    \ingroup Signature
+    
+    \brief This function validates a signature by hashing the data and 
+    using the resulting hash and key to verify the signature.
+    
+    \return 0 Success
+    \return SIG_TYPE_E -231, signature type not enabled/ available
+    \return BAD_FUNC_ARG -173, bad function argument provided
+    \return BUFFER_E -132, output buffer too small or input too large.
+    
+    \param hash_type A hash type from the “enum  wc_HashType” such as 
+    “WC_HASH_TYPE_SHA256”.
+    \param sig_type A signature type enum value such as 
+    WC_SIGNATURE_TYPE_ECC or WC_SIGNATURE_TYPE_RSA.
+    \param data Pointer to buffer containing the data to hash.
+    \param data_len Length of the data buffer.
+    \param sig Pointer to buffer to output signature.
+    \param sig_len Length of the signature output buffer.
+    \param key Pointer to a key structure such as ecc_key or RsaKey.
+    \param key_len Size of the key structure.
+    
+    _Example_
+    \code
+    int ret;
+    ecc_key eccKey;
+
+    // Import the public key
+    wc_ecc_init(&eccKey);
+    ret = wc_ecc_import_x963(eccPubKeyBuf, eccPubKeyLen, &eccKey);
+    // Perform signature verification using public key
+    ret = wc_SignatureVerify(
+    WC_HASH_TYPE_SHA256, WC_SIGNATURE_TYPE_ECC,
+    fileBuf, fileLen,
+    sigBuf, sigLen,
+    &eccKey, sizeof(eccKey));
+    printf("Signature Verification: %s 
+    (%d)\n", (ret == 0) ? "Pass" : "Fail", ret);
+    wc_ecc_free(&eccKey);
+    \endcode
+    
+    \sa wc_SignatureGetSize
+    \sa wc_SignatureGenerate
+*/
+WOLFSSL_API int wc_SignatureVerify(
+    enum wc_HashType hash_type, enum wc_SignatureType sig_type,
+    const byte* data, word32 data_len,
+    const byte* sig, word32 sig_len,
+    const void* key, word32 key_len);
+/*!
+    \ingroup Signature
+    
+    \brief This function generates a signature from the data using a 
+    key. It first creates a hash of the data then signs the hash using the key.
+
+    \return 0 Success
+    \return SIG_TYPE_E -231, signature type not enabled/ available
+    \return BAD_FUNC_ARG -173, bad function argument provided
+    \return BUFFER_E -132, output buffer too small or input too large.
+    
+    \param hash_type A hash type from the “enum  wc_HashType” 
+    such as “WC_HASH_TYPE_SHA256”.
+    \param sig_type A signature type enum value such as 
+    WC_SIGNATURE_TYPE_ECC or WC_SIGNATURE_TYPE_RSA.
+    \param data Pointer to buffer containing the data to hash.
+    \param data_len Length of the data buffer.
+    \param sig Pointer to buffer to output signature.
+    \param sig_len Length of the signature output buffer.
+    \param key Pointer to a key structure such as ecc_key or RsaKey.
+    \param key_len Size of the key structure.
+    \param rng Pointer to an initialized RNG structure.
+    
+    _Example_
+    \code
+    int ret;
+    WC_RNG rng;
+    ecc_key eccKey;
+    
+    wc_InitRng(&rng);
+    wc_ecc_init(&eccKey);
+
+    // Generate key
+    ret = wc_ecc_make_key(&rng, 32, &eccKey);
+
+    // Get signature length and allocate buffer
+    sigLen = wc_SignatureGetSize(sig_type, &eccKey, sizeof(eccKey));
+    sigBuf = malloc(sigLen);
+
+    // Perform signature verification using public key
+    ret = wc_SignatureGenerate(
+        WC_HASH_TYPE_SHA256, WC_SIGNATURE_TYPE_ECC,
+        fileBuf, fileLen,
+        sigBuf, &sigLen,
+        &eccKey, sizeof(eccKey),
+        &rng);
+    printf("Signature Generation: %s 
+    (%d)\n", (ret == 0) ? "Pass" : "Fail", ret);
+
+    free(sigBuf);
+    wc_ecc_free(&eccKey);
+    wc_FreeRng(&rng);
+    \endcode
+    
+    \sa wc_SignatureGetSize
+    \sa wc_SignatureVerify
+*/
+WOLFSSL_API int wc_SignatureGenerate(
+    enum wc_HashType hash_type, enum wc_SignatureType sig_type,
+    const byte* data, word32 data_len,
+    byte* sig, word32 *sig_len,
+    const void* key, word32 key_len,
+    WC_RNG* rng);

doc/dox_comments/header_files/srp.h

@@ -0,0 +1,496 @@
+/*!
+    \ingroup SRP
+    
+    \brief Initializes the Srp struct for usage.
+    
+    \return 0 on success.
+    \return BAD_FUNC_ARG Returns when there's an issue with the arguments such 
+    as srp being null or SrpSide not being SRP_CLIENT_SIDE or SRP_SERVER_SIDE.
+    \return NOT_COMPILED_IN Returns when a type is passed as an argument but 
+    hasn't been configured in the wolfCrypt build.
+    \return <0 on error.
+    
+    \param srp the Srp structure to be initialized.
+    \param type the hash type to be used.
+    \param side the side of the communication.
+    
+    _Example_
+    \code
+    Srp srp;
+    if (wc_SrpInit(&srp, SRP_TYPE_SHA, SRP_CLIENT_SIDE) != 0)
+    {
+        // Initialization error
+    }
+    else
+    {
+        wc_SrpTerm(&srp);
+    }
+    \endcode
+    
+    \sa wc_SrpTerm
+    \sa wc_SrpSetUsername
+*/
+WOLFSSL_API int wc_SrpInit(Srp* srp, SrpType type, SrpSide side);
+/*!
+    \ingroup SRP
+    
+    \brief Releases the Srp struct resources after usage.
+    
+    \return none No returns.
+    
+    \param srp Pointer to the Srp structure to be terminated.
+    
+    _Example_
+    \code
+    Srp srp;
+    wc_SrpInit(&srp, SRP_TYPE_SHA, SRP_CLIENT_SIDE);
+    // Use srp
+    wc_SrpTerm(&srp)
+    \endcode
+    
+    \sa wc_SrpInit
+*/
+WOLFSSL_API void wc_SrpTerm(Srp* srp);
+/*!
+    \ingroup SRP
+    
+    \brief Sets the username. This function MUST be called after wc_SrpInit.
+    
+    \return 0 Username set successfully.
+    \return BAD_FUNC_ARG: Return if srp or username is null.
+    \return MEMORY_E: Returns if there is an issue allocating memory 
+    for srp->user
+    \return < 0: Error.
+
+    \param srp the Srp structure.
+    \param username the buffer containing the username.
+    \param size the username size in bytes
+    
+    _Example_
+    \code
+    Srp srp;
+    byte username[] = "user";
+    word32 usernameSize = 4;
+
+    wc_SrpInit(&srp, SRP_TYPE_SHA, SRP_CLIENT_SIDE);
+    if(wc_SrpSetUsername(&srp, username, usernameSize) != 0)
+    {
+        // Error occurred setting username.
+    }
+    wc_SrpTerm(&srp);
+    \endcode
+    
+    \sa wc_SrpInit
+    \sa wc_SrpSetParams
+    \sa wc_SrpTerm
+*/
+WOLFSSL_API int wc_SrpSetUsername(Srp* srp, const byte* username, word32 size);
+/*!
+    \ingroup SRP
+    
+    \brief Sets the srp parameters based on the username..  Must be called 
+    after wc_SrpSetUsername.
+    
+    \return 0 Success
+    \return BAD_FUNC_ARG Returns if srp, N, g, or salt is null or if nSz < gSz.
+    \return SRP_CALL_ORDER_E Returns if wc_SrpSetParams is called before 
+wc_SrpSetUsername.
+    \return <0 Error
+    
+    \param srp the Srp structure.
+    \param N the Modulus. N = 2q+1, [q, N] are primes.
+    \param nSz the N size in bytes.
+    \param g the Generator modulo N.
+    \param gSz the g size in bytes
+    \param salt a small random salt. Specific for each username.
+    \param saltSz the salt size in bytes
+
+    _Example_
+    \code
+    Srp srp;
+    byte username[] = "user";
+    word32 usernameSize = 4;
+
+    byte N[] = { }; // Contents of byte array N
+    byte g[] = { }; // Contents of byte array g
+    byte salt[] = { }; // Contents of byte array salt
+
+    wc_SrpInit(&srp, SRP_TYPE_SHA, SRP_CLIENT_SIDE);
+    wc_SrpSetUsername(&srp, username, usernameSize);
+
+    if(wc_SrpSetParams(&srp, N, sizeof(N), g, sizeof(g), salt, 
+    sizeof(salt)) != 0)
+    {
+        // Error setting params
+    }
+    wc_SrpTerm(&srp);
+    \endcode
+    
+    \sa wc_SrpInit
+    \sa wc_SrpSetUsername
+    \sa wc_SrpTerm
+*/
+WOLFSSL_API int wc_SrpSetParams(Srp* srp, const byte* N,    word32 nSz,
+                                          const byte* g,    word32 gSz,
+                                          const byte* salt, word32 saltSz);
+/*!
+    \ingroup SRP
+    
+    \brief Sets the password. Setting the password does not persists the 
+    clear password data in the srp structure. The client calculates 
+    x = H(salt + H(user:pswd)) and stores it in the auth field. This function 
+    MUST be called after wc_SrpSetParams and is CLIENT SIDE ONLY.
+    
+    \return 0 Success
+    \return BAD_FUNC_ARG Returns if srp or password is null or if srp->side 
+    is not set to SRP_CLIENT_SIDE.
+    \return SRP_CALL_ORDER_E Returns when wc_SrpSetPassword is called out 
+    of order.
+    \return <0 Error
+
+    \param srp The Srp structure.
+    \param password The buffer containing the password.
+    \param size The size of the password in bytes.
+
+    _Example_
+    \code
+    Srp srp;
+    byte username[] = "user";
+    word32 usernameSize = 4;
+    byte password[] = "password";
+    word32 passwordSize = 8;
+
+    byte N[] = { }; // Contents of byte array N
+    byte g[] = { }; // Contents of byte array g
+    byte salt[] = { }; // Contents of byte array salt
+
+    wc_SrpInit(&srp, SRP_TYPE_SHA, SRP_CLIENT_SIDE);
+    wc_SrpSetUsername(&srp, username, usernameSize);
+    wc_SrpSetParams(&srp, N, sizeof(N), g, sizeof(g), salt, sizeof(salt));
+
+    if(wc_SrpSetPassword(&srp, password, passwordSize) != 0)
+    {
+        // Error setting password
+    }
+
+    wc_SrpTerm(&srp);
+    \endcode
+    
+    \sa wc_SrpInit
+    \sa wc_SrpSetUsername
+    \sa wc_SrpSetParams
+*/
+WOLFSSL_API int wc_SrpSetPassword(Srp* srp, const byte* password, word32 size);
+/*!
+    \ingroup SRP
+    
+    \brief Sets the verifier. This function MUST be called after 
+    wc_SrpSetParams and is SERVER SIDE ONLY.
+    
+    \return 0 Success
+    \return BAD_FUNC_ARG Returned if srp or verifier is null or 
+    srp->side is not SRP_SERVER_SIDE.
+    \return <0 Error
+
+    \param srp The Srp structure.
+    \param verifier The structure containing the verifier.
+    \param size The verifier size in bytes.
+
+    _Example_
+    \code
+    Srp srp;
+    byte username[] = "user";
+    word32 usernameSize = 4;
+
+    byte N[] = { }; // Contents of byte array N
+    byte g[] = { }; // Contents of byte array g
+    byte salt[] = { }; // Contents of byte array salt
+    wc_SrpInit(&srp, SRP_TYPE_SHA, SRP_SERVER_SIDE);
+    wc_SrpSetUsername(&srp, username, usernameSize);
+    wc_SrpSetParams(&srp, N, sizeof(N), g, sizeof(g), salt, sizeof(salt))
+    byte verifier[] = { }; // Contents of some verifier
+
+    if(wc_SrpSetVerifier(&srp, verifier, sizeof(verifier)) != 0)
+    {
+        // Error setting verifier
+    }
+
+    wc_SrpTerm(&srp);
+    \endcode
+    
+    \sa wc_SrpInit
+    \sa wc_SrpSetParams
+    \sa wc_SrpGetVerifier
+*/
+WOLFSSL_API int wc_SrpSetVerifier(Srp* srp, const byte* verifier, word32 size);
+/*!
+    \ingroup SRP
+    
+    \brief Gets the verifier. The client calculates the verifier 
+    with v = g ^ x % N.
+    This function MAY be called after wc_SrpSetPassword and 
+    is CLIENT SIDE ONLY.
+        
+    \return 0 Success
+    \return BAD_FUNC_ARG Returned if srp, verifier or size is null 
+    or if srp->side is not SRP_CLIENT_SIDE.
+    \return SRP_CALL_ORDER_E Returned if wc_SrpGetVerifier is called 
+    out of order.
+    \return <0 Error
+    
+    \param srp The Srp structure.
+    \param verifier The buffer to write the verifier.
+    \param size Buffer size in bytes.  Updated with the verifier size.
+    
+    _Example_
+    \code
+    Srp srp;
+    byte username[] = "user";
+    word32 usernameSize = 4;
+    byte password[] = "password";
+    word32 passwordSize = 8;
+
+    byte N[] = { }; // Contents of byte array N
+    byte g[] = { }; // Contents of byte array g
+    byte salt[] = { }; // Contents of byte array salt
+    byte v[64];
+    word32 vSz = 0;
+    vSz = sizeof(v);
+
+    wc_SrpInit(&srp, SRP_TYPE_SHA, SRP_CLIENT_SIDE);
+    wc_SrpSetUsername(&srp, username, usernameSize);
+    wc_SrpSetParams(&srp, N, sizeof(N), g, sizeof(g), salt, sizeof(salt))
+    wc_SrpSetPassword(&srp, password, passwordSize)
+
+    if( wc_SrpGetVerifier(&srp, v, &vSz ) != 0)
+    {
+        // Error getting verifier
+    }
+    wc_SrpTerm(&srp);
+    \endcode
+    
+    \sa wc_SrpSetVerifier
+    \sa wc_SrpSetPassword
+*/
+WOLFSSL_API int wc_SrpGetVerifier(Srp* srp, byte* verifier, word32* size);
+/*!
+    \ingroup SRP
+    
+    \brief Sets the private ephemeral value. The private ephemeral value 
+    is known as:
+    a at the client side. a = random()
+    b at the server side. b = random()
+    This function is handy for unit test cases or if the developer wants 
+    to use an external
+    random source to set the ephemeral value. This function MAY be called 
+    before wc_SrpGetPublic.
+    
+    \return 0 Success
+    \return BAD_FUNC_ARG Returned if srp, private, or size is null.
+    \return SRP_CALL_ORDER_E Returned if wc_SrpSetPrivate is called out 
+    of order.
+    \return <0 Error
+    
+    \param srp the Srp structure.
+    \param priv the ephemeral value.
+    \param size the private size in bytes.
+
+    _Example_
+    \code
+    Srp srp;
+    byte username[] = "user";
+    word32 usernameSize = 4;
+
+    byte N[] = { }; // Contents of byte array N
+    byte g[] = { }; // Contents of byte array g
+    byte salt[] = { }; // Contents of byte array salt
+    byte verifier = { }; // Contents of some verifier
+    wc_SrpInit(&srp, SRP_TYPE_SHA, SRP_SERVER_SIDE);
+    wc_SrpSetUsername(&srp, username, usernameSize);
+    wc_SrpSetParams(&srp, N, sizeof(N), g, sizeof(g), salt, sizeof(salt))
+    wc_SrpSetVerifier(&srp, verifier, sizeof(verifier))
+
+    byte b[] = { }; // Some ephemeral value
+    if( wc_SrpSetPrivate(&srp, b, sizeof(b)) != 0)
+    {
+        // Error setting private ephemeral
+    }
+
+    wc_SrpTerm(&srp);
+    \endcode
+    
+    \sa wc_SrpGetPublic
+*/
+WOLFSSL_API int wc_SrpSetPrivate(Srp* srp, const byte* priv, word32 size);
+/*!
+    \ingroup SRP
+    
+    \brief Gets the public ephemeral value.  The public ephemeral value 
+    is known as:
+    A at the client side. A = g ^ a % N
+    B at the server side. B = (k * v + (g ˆ b % N)) % N
+    This function MUST be called after wc_SrpSetPassword or wc_SrpSetVerifier.
+    The function wc_SrpSetPrivate may be called before wc_SrpGetPublic.
+    
+    \return 0 Success
+    \return BAD_FUNC_ARG Returned if srp, pub, or size is null.
+    \return SRP_CALL_ORDER_E Returned if wc_SrpGetPublic is called out 
+    of order.
+    \return BUFFER_E Returned if size < srp.N.
+    \return <0 Error
+
+    \param srp the Srp structure.
+    \param pub the buffer to write the public ephemeral value.
+    \param size the the buffer size in bytes. Will be updated with 
+    the ephemeral value size.
+
+    _Example_
+    \code
+    Srp srp;
+    byte username[] = "user";
+    word32 usernameSize = 4;
+    byte password[] = "password";
+    word32 passwordSize = 8;
+
+    byte N[] = { }; // Contents of byte array N
+    byte g[] = { }; // Contents of byte array g
+    byte salt[] = { }; // Contents of byte array salt
+    wc_SrpInit(&srp, SRP_TYPE_SHA, SRP_CLIENT_SIDE);
+    wc_SrpSetUsername(&srp, username, usernameSize);
+    wc_SrpSetParams(&srp, N, sizeof(N), g, sizeof(g), salt, sizeof(salt));
+    wc_SrpSetPassword(&srp, password, passwordSize)
+
+    byte public[64];
+    word32 publicSz = 0;
+
+    if( wc_SrpGetPublic(&srp, public, &publicSz) != 0)
+    {
+        // Error getting public ephemeral
+    }
+
+    wc_SrpTerm(&srp);
+    \endcode
+    
+    \sa wc_SrpSetPrivate
+    \sa wc_SrpSetPassword
+    \sa wc_SrpSetVerifier
+*/
+WOLFSSL_API int wc_SrpGetPublic(Srp* srp, byte* pub, word32* size);
+/*!
+    \ingroup SRP
+    
+    \brief Computes the session key.  The key can be accessed at 
+    srp->key after success.
+    
+    \return 0 Success
+    \return BAD_FUNC_ARG Returned if srp, clientPubKey, or serverPubKey 
+    or if clientPubKeySz or serverPubKeySz is 0.
+    \return SRP_CALL_ORDER_E Returned if wc_SrpComputeKey is called out 
+    of order.
+    \return <0 Error
+    
+    \param srp the Srp structure.
+    \param clientPubKey the client's public ephemeral value.
+    \param clientPubKeySz the client's public ephemeral value size.
+    \param serverPubKey the server's public ephemeral value.
+    \param serverPubKeySz the server's public ephemeral value size.
+
+    _Example_
+    \code
+    Srp server;
+
+    byte username[] = "user";
+        word32 usernameSize = 4;
+    byte password[] = "password";
+    word32 passwordSize = 8;
+    byte N[] = { }; // Contents of byte array N
+    byte g[] = { }; // Contents of byte array g
+    byte salt[] = { }; // Contents of byte array salt
+    byte verifier[] = { }; // Contents of some verifier
+    byte serverPubKey[] = { }; // Contents of server pub key
+    word32 serverPubKeySize = sizeof(serverPubKey);
+    byte clientPubKey[64];
+    word32 clientPubKeySize = 64;
+
+    wc_SrpInit(&server, SRP_TYPE_SHA, SRP_SERVER_SIDE);
+    wc_SrpSetUsername(&server, username, usernameSize);
+    wc_SrpSetParams(&server, N, sizeof(N), g, sizeof(g), salt, sizeof(salt));
+    wc_SrpSetVerifier(&server, verifier, sizeof(verifier));
+    wc_SrpGetPublic(&server, serverPubKey, &serverPubKeySize);
+
+    wc_SrpComputeKey(&server, clientPubKey, clientPubKeySz,
+                                          serverPubKey, serverPubKeySize)
+    wc_SrpTerm(&server);
+    \endcode
+    
+    \sa wc_SrpGetPublic
+*/
+WOLFSSL_API int wc_SrpComputeKey(Srp* srp,
+                                 byte* clientPubKey, word32 clientPubKeySz,
+                                 byte* serverPubKey, word32 serverPubKeySz);
+/*!
+    \ingroup SRP
+    
+    \brief Gets the proof. This function MUST be called after wc_SrpComputeKey.
+    
+    \return 0 Success
+    \return BAD_FUNC_ARG Returns if srp, proof, or size is null.
+    \return BUFFER_E Returns if size is less than the hash size of srp->type.
+    \return <0 Error
+
+    \param srp the Srp structure.
+    \param proof the peers proof.
+    \param size the proof size in bytes.
+
+    _Example_
+    \code
+    Srp cli;
+    byte clientProof[SRP_MAX_DIGEST_SIZE];
+    word32 clientProofSz = SRP_MAX_DIGEST_SIZE;
+
+    // Initialize Srp following steps from previous examples
+
+    if (wc_SrpGetProof(&cli, clientProof, &clientProofSz) != 0)
+    {
+        // Error getting proof
+    }
+    \endcode
+    
+    \sa wc_SrpComputeKey
+*/
+WOLFSSL_API int wc_SrpGetProof(Srp* srp, byte* proof, word32* size);
+/*!
+    \ingroup SRP
+    
+    \brief Verifies the peers proof. This function MUST be called before 
+    wc_SrpGetSessionKey.
+    
+    \return 0 Success
+    \return <0 Error
+    
+    \param srp the Srp structure.
+    \param proof the peers proof.
+    \param size the proof size in bytes.
+    
+    _Example_
+    \code
+    Srp cli;
+    Srp srv;
+    byte clientProof[SRP_MAX_DIGEST_SIZE];
+    word32 clientProofSz = SRP_MAX_DIGEST_SIZE;
+
+    // Initialize Srp following steps from previous examples
+    // First get the proof
+    wc_SrpGetProof(&cli, clientProof, &clientProofSz)
+
+    if (wc_SrpVerifyPeersProof(&srv, clientProof, clientProofSz) != 0)
+    {
+        // Error verifying proof
+    }
+    \endcode
+    
+    \sa wc_SrpGetSessionKey
+    \sa wc_SrpGetProof
+    \sa wc_SrpTerm
+*/
+WOLFSSL_API int wc_SrpVerifyPeersProof(Srp* srp, byte* proof, word32 size);

doc/dox_comments/header_files/tfm.h

@@ -0,0 +1,29 @@
+/*!
+    \ingroup Math
+    
+    \brief This function checks the runtime fastmath settings for the maximum 
+    size of an integer. It is important when a user is using a wolfCrypt 
+    library independently, as the FP_SIZE must match for each library in order 
+    for math to work correctly. This check is defined as 
+    CheckFastMathSettings(), which simply compares CheckRunTimeFastMath 
+    and FP_SIZE, returning 0 if there is a mismatch, or 1 if they match.
+    
+    \return FP_SIZE Returns FP_SIZE, corresponding to the max size 
+    available for the math library.
+    
+    \param none No parameters.
+    
+    _Example_
+    \code
+    if (CheckFastMathSettings() != 1) {
+	return err_sys("Build vs. runtime fastmath FP_MAX_BITS mismatch\n");
+    } 
+    // This is converted by the preprocessor to:
+    // if ( (CheckRunTimeFastMath() == FP_SIZE) != 1) {
+    // and confirms that the fast math settings match
+    // the compile time settings
+    \endcode
+    
+    \sa CheckRunTimeSettings
+*/
+WOLFSSL_API word32 CheckRunTimeFastMath(void);

doc/dox_comments/header_files/types.h

@@ -0,0 +1,169 @@
+/*!
+    \ingroup Memory
+    
+    \brief This is not actually a function, but rather a preprocessor macro, 
+    which allows the user to substitute in their own malloc, realloc, and free 
+    functions in place of the standard C memory functions.
+    To use external memory functions, define XMALLOC_USER. This will cause the 
+    memory functions to be replaced by external functions of the form:
+    extern void *XMALLOC(size_t n, void* heap, int type);
+    extern void *XREALLOC(void *p, size_t n, void* heap, int type);
+    extern void XFREE(void *p, void* heap, int type);
+    To use the basic C memory functions in place of wolfSSL_Malloc, 
+    wolfSSL_Realloc, wolfSSL_Free, define NO_WOLFSSL_MEMORY. This 
+    will replace the memory functions with:
+    #define XMALLOC(s, h, t) 	((void)h, (void)t, malloc((s)))
+    #define XFREE(p, h, t)   	{void* xp = (p); if((xp)) free((xp));}
+    #define XREALLOC(p, n, h, t) realloc((p), (n))
+    If none of these options are selected, the system will default to use 
+    the wolfSSL memory functions. A user can set custom memory functions 
+    through callback hooks, (see wolfSSL_Malloc, 
+    wolfSSL_Realloc, wolfSSL_Free). This option will replace the 
+    memory functions with:
+    #define XMALLOC(s, h, t) 	((void)h, (void)t, wolfSSL_Malloc((s)))
+    #define XFREE(p, h, t)   	{void* xp = (p); if((xp)) wolfSSL_Free((xp));}
+    #define XREALLOC(p, n, h, t) wolfSSL_Realloc((p), (n))
+    	
+    \return pointer Return a pointer to allocated memory on success
+	\return NULL on failure
+	
+	\param s size of memory to allocate
+	\param h (used by custom XMALLOC function) pointer to the heap to use	
+	\param t memory allocation types for user hints. See enum in types.h
+	
+	_Example_
+	\code
+	int* 10 ints = XMALLOC(10 * sizeof(int), NULL, DYNAMIC_TYPE_TMP_BUFFER);
+
+    if ( ints == NULL) {
+	// error allocating space
+	return MEMORY_E;
+    }
+	\endcode
+	
+	\sa wolfSSL_Malloc
+	\sa wolfSSL_Realloc
+	\sa wolfSSL_Free
+	\sa wolfSSL_SetAllocators
+*/
+		WOLFSSL_API void* XMALLOC(size_t n, void* heap, int type);
+/*!
+    \ingroup Memory
+    
+    \brief This is not actually a function, but rather a preprocessor macro, 
+    which allows the user to substitute in their own malloc, realloc, and 
+    free functions in place of the standard C memory functions.
+    To use external memory functions, define XMALLOC_USER. This will cause the 
+    memory functions to be replaced by external functions of the form:
+    extern void *XMALLOC(size_t n, void* heap, int type);
+    extern void *XREALLOC(void *p, size_t n, void* heap, int type);
+    extern void XFREE(void *p, void* heap, int type);
+    To use the basic C memory functions in place of wolfSSL_Malloc, 
+    wolfSSL_Realloc, wolfSSL_Free, define NO_WOLFSSL_MEMORY. This will 
+    replace the memory functions with:
+    #define XMALLOC(s, h, t) 	((void)h, (void)t, malloc((s)))
+   	#define XFREE(p, h, t)   	{void* xp = (p); if((xp)) free((xp));}
+   	#define XREALLOC(p, n, h, t) realloc((p), (n))
+    If none of these options are selected, the system will default to 
+    use the wolfSSL memory functions. A user can set custom memory 
+    functions through callback hooks, (see wolfSSL_Malloc, 
+    wolfSSL_Realloc, wolfSSL_Free). This option will replace 
+    the memory functions with:
+    #define XMALLOC(s, h, t) 	((void)h, (void)t, wolfSSL_Malloc((s)))
+    #define XFREE(p, h, t)   	{void* xp = (p); if((xp)) wolfSSL_Free((xp));}
+    #define XREALLOC(p, n, h, t) wolfSSL_Realloc((p), (n))
+
+    \return Return a pointer to allocated memory on success
+	\return NULL on failure
+	
+	\param p pointer to the address to reallocate
+	\param n size of memory to allocate
+	\param h (used by custom XREALLOC function) pointer to the heap to use	
+	\param t memory allocation types for user hints. See enum in types.h
+	
+	_Example_
+	\code
+	none
+	\endcode
+	
+	\sa wolfSSL_Malloc
+	\sa wolfSSL_Realloc
+	\sa wolfSSL_Free
+	\sa wolfSSL_SetAllocators
+*/
+		WOLFSSL_API void* XREALLOC(void *p, size_t n, void* heap, int type);
+/*!
+    \ingroup Memory
+    
+    \brief This is not actually a function, but rather a preprocessor macro, 
+    which allows the user to substitute in their own malloc, realloc, and 
+    free functions in place of the standard C memory functions.
+    To use external memory functions, define XMALLOC_USER. This will cause 
+    the memory functions to be replaced by external functions of the form:
+    extern void *XMALLOC(size_t n, void* heap, int type);
+    extern void *XREALLOC(void *p, size_t n, void* heap, int type);
+    extern void XFREE(void *p, void* heap, int type);
+    To use the basic C memory functions in place of wolfSSL_Malloc, 
+    wolfSSL_Realloc, wolfSSL_Free, define NO_WOLFSSL_MEMORY. This 
+    will replace the memory functions with:
+    #define XMALLOC(s, h, t) 	((void)h, (void)t, malloc((s)))
+    #define XFREE(p, h, t)   	{void* xp = (p); if((xp)) free((xp));}
+    #define XREALLOC(p, n, h, t) realloc((p), (n))
+    If none of these options are selected, the system will default to use 
+    the wolfSSL memory functions. A user can set custom memory functions 
+    through callback hooks, (see wolfSSL_Malloc, wolfSSL_Realloc, 
+    wolfSSL_Free). This option will replace the memory functions with:
+    #define XMALLOC(s, h, t) 	((void)h, (void)t, wolfSSL_Malloc((s)))
+    #define XFREE(p, h, t)   	{void* xp = (p); if((xp)) wolfSSL_Free((xp));}
+    #define XREALLOC(p, n, h, t) wolfSSL_Realloc((p), (n))
+    
+    \return none No returns.
+    
+    \param p pointer to the address to free
+	\param h (used by custom XFREE function) pointer to the heap to use	
+	\param t memory allocation types for user hints. See enum in types.h
+	
+	_Example_
+	\code
+	int* 10 ints = XMALLOC(10 * sizeof(int), NULL, DYNAMIC_TYPE_TMP_BUFFER);
+
+    if ( ints == NULL) {
+	    // error allocating space
+	    return MEMORY_E;
+    }
+	\endcode
+	
+	\sa wolfSSL_Malloc
+	\sa wolfSSL_Realloc
+	\sa wolfSSL_Free
+	\sa wolfSSL_SetAllocators
+*/
+		WOLFSSL_API void XFREE(void *p, void* heap, int type);
+/*!
+    \ingroup Math
+    
+    \brief This function checks the compile time class settings. It is 
+    important when a user is using a wolfCrypt library independently, as 
+    the settings must match between libraries for math to work correctly. 
+    This check is defined as CheckCtcSettings(), which simply compares 
+    CheckRunTimeSettings and CTC_SETTINGS, returning 0 if there is a 
+    mismatch, or 1 if they match.
+    
+    \return settings Returns the runtime CTC_SETTINGS (Compile Time Settings)
+    
+    \param none No Parameters.
+    
+    _Example_
+    \code
+    if (CheckCtcSettings() != 1) {
+	    return err_sys("Build vs. runtime math mismatch\n");
+    } 
+    // This is converted by the preprocessor to:
+    // if ( (CheckCtcSettings() == CTC_SETTINGS) != 1) {
+    // and will compare whether the compile time class settings
+    // match the current settings
+    \endcode
+    
+    \sa CheckRunTimeFastMath
+*/
+	WOLFSSL_API word32 CheckRunTimeSettings(void);

doc/dox_comments/header_files/wc_encrypt.h

@@ -0,0 +1,208 @@
+/*!
+    \ingroup AES
+    \brief Decrypts a cipher from the input buffer in, and places the 
+    resulting plain text in the output buffer out using cipher block 
+    chaining with AES. This function does not require an AES structure 
+    to be initialized. Instead, it takes in a key and an iv 
+    (initialization vector) and uses these to initialize an 
+    AES object and then decrypt the cipher text.
+    
+    \return 0 On successfully decrypting message
+    \return BAD_ALIGN_E Returned on block align error
+    \return BAD_FUNC_ARG Returned if key length is invalid or AES object 
+    is null during AesSetIV
+    \return MEMORY_E Returned if WOLFSSL_SMALL_STACK is enabled and 
+    XMALLOC fails to instantiate an AES object.
+    
+    \param out pointer to the output buffer in which to store the plain 
+    text of the decrypted message
+    \param in pointer to the input buffer containing cipher text to be 
+    decrypted
+    \param inSz size of input message
+    \param key 16, 24, or 32 byte secret key for decryption
+    \param keySz size of key used for decryption
+    
+    _Example_
+    \code
+    int ret = 0;
+    byte key[] = { some 16, 24, or 32 byte key };
+    byte iv[]  = { some 16 byte iv };
+    byte cipher[AES_BLOCK_SIZE * n]; //n being a positive integer making 
+    cipher some multiple of 16 bytes
+    // fill cipher with cipher text
+    byte plain [AES_BLOCK_SIZE * n];
+    if ((ret = wc_AesCbcDecryptWithKey(plain, cipher, AES_BLOCK_SIZE, key, 
+    AES_BLOCK_SIZE, iv)) != 0 ) {
+	// Decrypt Error
+    }
+    \endcode
+    
+    \sa wc_AesSetKey
+    \sa wc_AesSetIV
+    \sa wc_AesCbcEncrypt
+    \sa wc_AesCbcDecrypt
+*/
+WOLFSSL_API int  wc_AesCbcDecryptWithKey(byte* out, const byte* in, word32 inSz,
+                                         const byte* key, word32 keySz,
+                                         const byte* iv);
+/*!
+    \ingroup 3DES
+    
+    \brief This function decrypts the input ciphertext, in, and stores the 
+    resulting plaintext in the output buffer, out. It uses DES encryption 
+    with cipher block chaining (CBC) mode. This function is a substitute 
+    for wc_Des_CbcDecrypt, allowing the user to decrypt a message without 
+    directly instantiating a Des structure.
+    
+    \return 0 Returned upon successfully decrypting the given ciphertext
+    \return MEMORY_E Returned if there is an error allocating space for a 
+    Des structure
+    
+    \param out pointer to the buffer in which to store the decrypted plaintext
+    \param in pointer to the input buffer containing the encrypted ciphertext
+    \param sz length of the ciphertext to decrypt
+    \param key pointer to the buffer containing the 8 byte key to use for 
+    decryption
+    \param iv pointer to the buffer containing the 8 byte iv to use for 
+    decryption. If no iv is provided, the iv defaults to 0
+    
+    _Example_
+    \code
+    int ret;
+    byte key[] = { // initialize with 8 byte key };
+    byte iv[]  = { // initialize with 8 byte iv };
+
+    byte cipher[]  = { // initialize with ciphertext };
+    byte decoded[sizeof(cipher)];
+
+    if ( wc_Des_CbcDecryptWithKey(decoded, cipher, sizeof(cipher), key, 
+    iv) != 0) { 
+    	// error decrypting message
+    }
+    \endcode
+    
+    \sa wc_Des_CbcDecrypt
+*/
+WOLFSSL_API int  wc_Des_CbcDecryptWithKey(byte* out,
+                                          const byte* in, word32 sz,
+                                          const byte* key, const byte* iv);
+/*!
+    \ingroup 3DES
+    
+    \brief This function encrypts the input plaintext, in, and stores the 
+    resulting ciphertext in the output buffer, out. It uses DES encryption 
+    with cipher block chaining (CBC) mode. This function is a substitute 
+    for wc_Des_CbcEncrypt, allowing the user to encrypt a message without 
+    directly instantiating a Des structure.
+    
+    \return 0 Returned after successfully encrypting data.
+    \return MEMORY_E Returned if there's an error allocating memory for a 
+    Des structure.
+    \return <0 Returned on any error during encryption.
+
+    \param out Final encrypted data
+    \param in Data to be encrypted, must be padded to Des block size.
+    \param sz Size of input buffer.
+    \param key Pointer to the key to use for encryption.
+    \param iv Initialization vector
+
+    _Example_
+    \code
+    byte key[] = { // initialize with 8 byte key };
+    byte iv[]  = { // initialize with 8 byte iv };
+    byte in[] = { // Initialize with plaintext };
+    byte out[sizeof(in)];
+    if ( wc_Des_CbcEncryptWithKey(&out, in, sizeof(in), key, iv) != 0)
+    { 
+    	// error encrypting message
+    }
+    \endcode
+    
+    \sa wc_Des_CbcDecryptWithKey
+    \sa wc_Des_CbcEncrypt
+*/
+WOLFSSL_API int  wc_Des_CbcEncryptWithKey(byte* out,
+                                          const byte* in, word32 sz,
+                                          const byte* key, const byte* iv);
+/*!
+    \ingroup 3DES
+    
+    \brief This function encrypts the input plaintext, in, and stores 
+    the resulting ciphertext in the output buffer, out. It uses Triple 
+    DES (3DES) encryption with cipher block chaining (CBC) mode. This 
+    function is a substitute for wc_Des3_CbcEncrypt, allowing the user 
+    to encrypt a message without directly instantiating a Des3 structure.
+    
+    \return 0 Returned after successfully encrypting data.
+    \return MEMORY_E Returned if there's an error allocating memory for 
+    a Des structure.
+    \return <0 Returned on any error during encryption.
+    
+    \parma out Final encrypted data
+    \param in Data to be encrypted, must be padded to Des block size.
+    \param sz Size of input buffer.
+    \param key Pointer to the key to use for encryption.
+    \param iv Initialization vector
+    
+    _Example_
+    \code
+    byte key[] = { // initialize with 8 byte key };
+    byte iv[]  = { // initialize with 8 byte iv };
+
+    byte in[] = { // Initialize with plaintext };
+    byte out[sizeof(in)];
+
+    if ( wc_Des3_CbcEncryptWithKey(&out, in, sizeof(in), key, iv) != 0)
+    { 
+    	// error encrypting message
+    }
+    \endcode
+    
+    \sa wc_Des3_CbcDecryptWithKey
+    \sa wc_Des_CbcEncryptWithKey
+    \sa wc_Des_CbcDecryptWithKey
+*/
+WOLFSSL_API int  wc_Des3_CbcEncryptWithKey(byte* out,
+                                           const byte* in, word32 sz,
+                                           const byte* key, const byte* iv);
+/*!
+    \ingroup 3DES
+    
+    \brief This function decrypts the input ciphertext, in, and stores 
+    the resulting plaintext in the output buffer, out. It uses Triple 
+    Des (3DES) encryption with cipher block chaining (CBC) mode. This 
+    function is a substitute for wc_Des3_CbcDecrypt, allowing the user 
+    to decrypt a message without directly instantiating a Des3 structure.
+    
+    \return 0 Returned upon successfully decrypting the given ciphertext
+    \return MEMORY_E Returned if there is an error allocating space for 
+    a Des structure
+    
+    \param out pointer to the buffer in which to store the decrypted plaintext
+    \param in pointer to the input buffer containing the encrypted ciphertext
+    \param sz length of the ciphertext to decrypt
+    \param key pointer to the buffer containing the 24 byte key to use 
+    for decryption
+    \param iv pointer to the buffer containing the 8 byte iv to use for 
+    decryption. If no iv is provided, the iv defaults to 0
+    
+    _Example_
+    \code
+    int ret;
+    byte key[] = { // initialize with 24 byte key };
+    byte iv[]  = { // initialize with 8 byte iv };
+
+    byte cipher[]  = { // initialize with ciphertext };
+    byte decoded[sizeof(cipher)];
+
+    if ( wc_Des3_CbcDecryptWithKey(decoded, cipher, sizeof(cipher), 
+    key, iv) != 0) { 
+    	// error decrypting message
+    }
+    \endcode
+    
+    \sa wc_Des3_CbcDecrypt
+*/
+WOLFSSL_API int  wc_Des3_CbcDecryptWithKey(byte* out,
+                                           const byte* in, word32 sz,
+                                           const byte* key, const byte* iv);

doc/dox_comments/header_files/wc_port.h

@@ -0,0 +1,43 @@
+/*!
+    \ingroup wolfCrypt
+    
+    \brief Used to initialize resources used by wolfCrypt.
+    
+    \return 0 upon success.
+    \return <0 upon failure of init resources.
+    
+    \param none No parameters.
+    
+    _Example_
+    \code
+    ...
+    if (wolfCrypt_Init() != 0) {
+        WOLFSSL_MSG("Error with wolfCrypt_Init call");
+    }
+    \endcode
+    
+    \sa wolfCrypt_Cleanup
+*/
+WOLFSSL_API int wolfCrypt_Init(void);
+
+/*!
+    \ingroup wolfCrypt
+    
+    \brief Used to clean up resources used by wolfCrypt.
+    
+    \return 0 upon success.
+    \return <0 upon failure of cleaning up resources.
+    
+    \param none No parameters.
+    
+    _Example_
+    \code
+    ...
+    if (wolfCrypt_Cleanup() != 0) {
+        WOLFSSL_MSG("Error with wolfCrypt_Cleanup call");
+    }
+    \endcode
+    
+    \sa wolfCrypt_Init
+*/
+WOLFSSL_API int wolfCrypt_Cleanup(void);

doc/dox_comments/header_files/wolfio.h

@@ -0,0 +1,526 @@
+/*!
+    \brief This function is the receive embedded callback.
+    
+    \return Success This function returns the number of bytes read.
+    \return WOLFSSL_CBIO_ERR_WANT_READ returned with a “Would block” message 
+    if the last error was SOCKET_EWOULDBLCOK or SOCKET_EAGAIN.
+    \return WOLFSSL_CBIO_ERR_TIMEOUT returned with a “Socket timeout” message.
+    \return WOLFSSL_CBIO_ERR_CONN_RST returned with a “Connection reset” 
+    message if the last error was  SOCKET_ECONNRESET.
+    \return WOLFSSL_CBIO_ERR_ISR returned with a “Socket interrupted” message 
+    if the last error was SOCKET_EINTR.
+    \return WOLFSSL_CBIO_ERR_WANT_READ returned with a “Connection refused” 
+    messag if the last error was SOCKET_ECONNREFUSED.
+    \return WOLFSSL_CBIO_ERR_CONN_CLOSE returned with a “Connection aborted” 
+    message if the last error was SOCKET_ECONNABORTED.
+    \return WOLFSSL_CBIO_ERR_GENERAL returned with a “General error” message 
+    if the last error was not specified.
+    
+    \param ssl a pointer to a WOLFSSL structure, created using wolfSSL_new().
+    \param buf a char pointer representation of the buffer.
+    \param sz the size of the buffer.
+    \param ctx a void pointer to user registered context. In the default case 
+    the ctx is a socket descriptor pointer.
+    
+    _Example_
+    \code
+    WOLFSSL_CTX* ctx = wolfSSL_CTX_new( protocol method );
+    WOLFSSL* ssl = wolfSSL_new(ctx);
+    char* buf;
+    int sz;
+    void* ctx;
+    int bytesRead = EmbedReceive(ssl, buf, sz, ctx);
+    if(bytesRead <= 0){
+	    // There were no bytes read. Failure case.
+    }
+    \endcode
+    
+    \sa wolfSSL_dtls_get_current_timeout
+    \sa TranslateReturnCode
+    \sa RECV_FUNCTION
+*/
+    WOLFSSL_API int EmbedReceive(WOLFSSL* ssl, char* buf, int sz, void* ctx);
+/*!
+    \brief This function is the send embedded callback.
+    
+    \return Success This function returns the number of bytes sent.
+    \return WOLFSSL_CBIO_ERR_WANT_WRITE returned with a “Would block” message 
+    if the last error was SOCKET_EWOULDBLOCK or SOCKET_EAGAIN.
+    \return WOLFSSL_CBIO_ERR_CONN_RST returned with a “Connection reset” 
+    message if the last error was SOCKET_ECONNRESET.
+    \return WOLFSSL_CBIO_ERR_ISR returned with a “Socket interrupted” message 
+    if the last error was SOCKET_EINTR.
+    \return WOLFSSL_CBIO_ERR_CONN_CLOSE returned with a “Socket EPIPE” message 
+    if the last error was SOCKET_EPIPE.
+    \return WOLFSSL_CBIO_ERR_GENERAL returned with a “General error” message 
+    if the last error was not specified.
+    
+    \param ssl a pointer to a WOLFSSL structure, created using wolfSSL_new().
+    \param buf a char pointer representing the buffer.
+    \param sz the size of the buffer.
+    \param ctx a void pointer to user registered context.
+    
+    _Example_
+    \code
+    WOLFSSL* ssl = wolfSSL_new(ctx);
+    char* buf;
+    int sz;
+    void* ctx;  
+    int dSent = EmbedSend(ssl, buf, sz, ctx);
+    if(dSent <= 0){
+    	// No byes sent. Failure case.
+    }
+    \endcode
+    
+    \sa TranslateReturnCode
+    \sa SEND_FUNCTION
+    \sa LastError
+    \sa InitSSL_Ctx
+    \sa LastError
+*/
+    WOLFSSL_API int EmbedSend(WOLFSSL* ssl, char* buf, int sz, void* ctx);
+/*!
+    \brief This function is the receive embedded callback.
+    
+    \return Success This function returns the nb bytes read if the execution 
+    was successful.
+    \return WOLFSSL_CBIO_ERR_WANT_READ if the connection refused or if a 
+    ‘would block’ error was thrown in the function.
+    \return WOLFSSL_CBIO_ERR_TIMEOUT returned if the socket timed out.
+    \return WOLFSSL_CBIO_ERR_CONN_RST returned if the connection reset.
+    \return WOLFSSL_CBIO_ERR_ISR returned if the socket was interrupted.
+    \return WOLFSSL_CBIO_ERR_GENERAL returned if there was a general error.
+    
+    \param ssl a pointer to a WOLFSSL structure, created using wolfSSL_new().
+    \param buf a constant char pointer to the buffer.
+    \param sz an int type representing the size of the buffer.
+    \param ctx a void pointer to the WOLFSSL_CTX context.
+    
+    _Example_
+    \code
+    WOLFSSL_CTX* ctx = wolfSSL_CTX_new( protocol method );
+    WOLFSSL* ssl = WOLFSSL_new(ctx);
+    char* buf;
+    int sz = sizeof(buf)/sizeof(char);
+    (void*)ctx;
+    …
+    int nb = EmbedReceiveFrom(ssl, buf, sz, ctx);
+    if(nb > 0){
+	    // nb is the number of bytes written and is positive
+    }
+    \endcode
+    
+    \sa TranslateReturnCode
+    \sa RECVFROM_FUNCTION
+    \sa Setsockopt
+*/
+        WOLFSSL_API int EmbedReceiveFrom(WOLFSSL* ssl, char* buf, int sz, void*);
+/*!
+    \brief This function is the send embedded callback.
+    
+    \return Success This function returns the number of bytes sent.
+    \return WOLFSSL_CBIO_ERR_WANT_WRITE returned with a “Would Block” message 
+    if the last error was either SOCKET_EWOULDBLOCK or SOCKET_EAGAIN error.
+    \return WOLFSSL_CBIO_ERR_CONN_RST returned with a “Connection reset” 
+    message if the last error was SOCKET_ECONNRESET.
+    \return WOLFSSL_CBIO_ERR_ISR returned with a “Socket interrupted” message 
+    if the last error was SOCKET_EINTR.
+    \return WOLFSSL_CBIO_ERR_CONN_CLOSE returned with a “Socket EPIPE” message 
+    if the last error was WOLFSSL_CBIO_ERR_CONN_CLOSE.
+    \return WOLFSSL_CBIO_ERR_GENERAL returned with a “General error” message 
+    if the last error was not specified.
+    
+    \param ssl a pointer to a WOLFSSL structure, created using wolfSSL_new().
+    \param buf a char pointer representing the buffer.
+    \param sz the size of the buffer.
+    \param ctx a void pointer to the user registered context. The default case 
+    is a WOLFSSL_DTLS_CTX sructure.
+    
+    _Example_
+    \code
+    WOLFSSL* ssl;
+    …
+    char* buf;
+    int sz;
+    void* ctx;
+
+    int sEmbed = EmbedSendto(ssl, buf, sz, ctx);
+    if(sEmbed <= 0){
+    	// No bytes sent. Failure case.
+    }
+    \endcode
+    
+    \sa LastError
+    \sa EmbedSend
+    \sa EmbedReceive
+*/
+        WOLFSSL_API int EmbedSendTo(WOLFSSL* ssl, char* buf, int sz, void* ctx);
+/*!
+    \brief This function is the DTLS Generate Cookie callback.
+    
+    \return Success This function returns the number of bytes copied 
+    into the buffer.
+    \return GEN_COOKIE_E returned if the getpeername failed in 
+    EmbedGenerateCookie.
+    
+    \param ssl a pointer to a WOLFSSL structure, created using wolfSSL_new().
+    \param buf byte pointer representing the buffer. It is the destination 
+    from XMEMCPY().
+    \param sz the size of the buffer.
+    \param ctx a void pointer to user registered context.
+    
+    _Example_
+    \code
+    WOLFSSL_CTX* ctx = wolfSSL_CTX_new( method );
+    WOLFSSL* ssl = wolfSSL_new(ctx);
+    byte buffer[BUFFER_SIZE];
+    int sz = sizeof(buffer)/sizeof(byte);
+    void* ctx;
+    …
+    int ret = EmbedGenerateCookie(ssl, buffer, sz, ctx);
+
+    if(ret > 0){
+    	// EmbedGenerateCookie code block for success
+    }
+    \endcode
+    
+    \sa wc_ShaHash
+    \sa EmbedGenerateCookie
+    \sa XMEMCPY
+    \sa XMEMSET
+*/
+        WOLFSSL_API int EmbedGenerateCookie(WOLFSSL* ssl, unsigned char* buf,
+                                           int sz, void*);
+/*!
+    \brief This function frees the response buffer.
+    
+    \return none No returns.
+    
+    \param ctx a void pointer to heap hint.
+    \param resp a byte pointer representing the response.
+    
+    _Example_
+    \code
+    void* ctx;
+    byte* resp; // Response buffer.
+    …
+    EmbedOcspRespFree(ctx, resp);
+    \endcode
+    
+    \sa XFREE
+*/
+    WOLFSSL_API void EmbedOcspRespFree(void*, unsigned char*);
+/*!
+    \brief This function registers a receive callback for wolfSSL to get input 
+    data.  By default, wolfSSL uses EmbedReceive() as the callback which uses 
+    the system’s TCP recv() function.  The user can register a function to get 
+    input from memory, some other network module, or from anywhere.  Please see 
+    the EmbedReceive() function in src/io.c as a guide for how the function 
+    should work and for error codes.  In particular, IO_ERR_WANT_READ should 
+    be returned for non blocking receive when no data is ready.
+    
+    \return none no Returns.
+    
+    \param ctx pointer to the SSL context, created with wolfSSL_CTX_new().
+    \param callback function to be registered as the receive callback for the 
+    wolfSSL context, ctx. The signature of this function must follow that as 
+    shown above in the Synopsis section.
+    
+    _Example_
+    \code
+    WOLFSSL_CTX* ctx = 0;
+    // Receive callback prototype
+    int MyEmbedReceive(WOLFSSL* ssl, char* buf, int sz, void* ctx);
+    // Register the custom receive callback with wolfSSL
+    wolfSSL_CTX_SetIORecv(ctx, MyEmbedReceive);
+    int MyEmbedReceive(WOLFSSL* ssl, char* buf, int sz, void* ctx)                   
+    {
+	    // custom EmbedReceive function
+    }
+    \endcode
+    
+    \sa wolfSSL_CTX_SetIOSend
+    \sa wolfSSL_SetIOReadCtx
+    \sa wolfSSL_SetIOWriteCtx
+*/
+WOLFSSL_API void wolfSSL_CTX_SetIORecv(WOLFSSL_CTX*, CallbackIORecv);
+/*!
+    \brief This function registers a context for the SSL session’s receive 
+    callback function.  By default, wolfSSL sets the file descriptor passed to 
+    wolfSSL_set_fd() as the context when wolfSSL is using the system’s TCP 
+    library. If you’ve registered your own receive callback you may want to set 
+    a specific context for the session.  For example, if you’re using memory 
+    buffers the context may be a pointer to a structure describing where and 
+    how to access the memory buffers.
+    
+    \return none No returns.
+    
+    \param ssl pointer to the SSL session, created with wolfSSL_new().
+    \param rctx pointer to the context to be registered with the SSL session’s 
+    (ssl) receive callback function.
+    
+    _Example_
+    \code
+    int sockfd;
+    WOLFSSL* ssl = 0;
+    ...
+    // Manually setting the socket fd as the receive CTX, for example
+    wolfSSL_SetIOReadCtx(ssl, &sockfd);
+    ...
+    \endcode
+    
+    \sa wolfSSL_CTX_SetIORecv
+    \sa wolfSSL_CTX_SetIOSend
+    \sa wolfSSL_SetIOWriteCtx
+*/
+WOLFSSL_API void wolfSSL_SetIOReadCtx( WOLFSSL* ssl, void *ctx);
+/*!
+    \brief This function registers a context for the SSL session’s send 
+    callback function.  By default, wolfSSL sets the file descriptor passed to 
+    wolfSSL_set_fd() as the context when wolfSSL is using the system’s TCP 
+    library. If you’ve registered your own send callback you may want to set a 
+    specific context for the session.  For example, if you’re using memory 
+    buffers the context may be a pointer to a structure describing where and 
+    how to access the memory buffers.
+    
+    \return none No returns.
+    
+    \param ssl pointer to the SSL session, created with wolfSSL_new().
+    \param wctx pointer to the context to be registered with the SSL session’s 
+    (ssl) send callback function.
+    
+    _Example_
+    \code
+    int sockfd;
+    WOLFSSL* ssl = 0;
+    ...
+    // Manually setting the socket fd as the send CTX, for example
+    wolfSSL_SetIOWriteCtx(ssl, &sockfd);
+    ...
+    \endcode
+    
+    \sa wolfSSL_CTX_SetIORecv
+    \sa wolfSSL_CTX_SetIOSend
+    \sa wolfSSL_SetIOReadCtx
+*/
+WOLFSSL_API void wolfSSL_SetIOWriteCtx(WOLFSSL* ssl, void *ctx);
+/*!
+    \ingroup IO
+
+    \brief This function returns the IOCB_ReadCtx member of the WOLFSSL struct.
+    
+    \return pointer This function returns a void pointer to the IOCB_ReadCtx 
+    member of the WOLFSSL structure.
+    \return NULL returned if the WOLFSSL struct is NULL.
+    
+    \param ssl a pointer to a WOLFSSL structure, created using wolfSSL_new().
+    
+    _Example_
+    \code
+    WOLFSSL* ssl = wolfSSL_new(ctx);
+    void* ioRead;
+    ...
+    ioRead = wolfSSL_GetIOReadCtx(ssl);
+    if(ioRead == NULL){
+    	// Failure case. The ssl object was NULL.
+    }
+    \endcode
+    
+    \sa wolfSSL_GetIOWriteCtx
+    \sa wolfSSL_SetIOReadFlags
+    \sa wolfSSL_SetIOWriteCtx
+    \sa wolfSSL_SetIOReadCtx
+    \sa wolfSSL_CTX_SetIOSend
+*/
+WOLFSSL_API void* wolfSSL_GetIOReadCtx( WOLFSSL* ssl);
+/*!
+    \ingroup IO
+
+    \brief This function returns the IOCB_WriteCtx member of the WOLFSSL structure.
+    
+    \return pointer This function returns a void pointer to the IOCB_WriteCtx 
+    member of the WOLFSSL structure.
+    \return NULL returned if the WOLFSSL struct is NULL.
+    
+    \param ssl a pointer to a WOLFSSL structure, created using wolfSSL_new().
+    
+    _Example_
+    \code
+    WOLFSSL* ssl;
+    void* ioWrite;
+    ...
+    ioWrite = wolfSSL_GetIOWriteCtx(ssl);
+    if(ioWrite == NULL){
+    	// The funciton returned NULL.
+    }
+    \endcode
+    
+    \sa wolfSSL_GetIOReadCtx
+    \sa wolfSSL_SetIOWriteCtx
+    \sa wolfSSL_SetIOReadCtx
+    \sa wolfSSL_CTX_SetIOSend
+*/
+WOLFSSL_API void* wolfSSL_GetIOWriteCtx(WOLFSSL* ssl);
+/*!
+    \brief This function sets the flags for the receive callback to use for 
+    the given SSL session.  The receive callback could be either the default 
+    wolfSSL EmbedReceive callback, or a custom callback specified by the user 
+    (see  wolfSSL_CTX_SetIORecv). The default flag value is set internally by 
+    wolfSSL to the value of 0. The default wolfSSL receive callback uses the 
+    recv() function to receive data from the socket. From the recv() man page: 
+    “The flags argument to a recv() function is formed by or'ing one or more 
+    of the values: MSG_OOB process out-of-band data, MSG_PEEK peek at incoming 
+    message, MSG_WAITALL	wait for full request or error. The MSG_OOB flag 
+    requests receipt of out-of-band data that would not be received in the 
+    normal data stream. Some protocols place expedited data at the head of 
+    the normal data queue, and thus this flag cannot be used with such 
+    protocols. The MSG_PEEK flag causes the receive operation to return 
+    data from the beginning of the receive queue without removing that data 
+    from the queue.  Thus, a subsequent receive call will return the same data. 
+    The MSG_WAITALL flag requests that the operation block until the full 
+    request is satisfied.  However, the call may still return less data than 
+    requested if a signal is caught, an error or disconnect occurs, or the next 
+    data to be received is of a different type than that returned.”
+    
+    \return none No returns.
+    
+    \param ssl pointer to the SSL session, created with wolfSSL_new().
+    \param flags value of the I/O read flags for the specified SSL 
+    session (ssl).
+    
+    _Example_
+    \code
+    WOLFSSL* ssl = 0;
+    ...
+    // Manually setting recv flags to 0
+    wolfSSL_SetIOReadFlags(ssl, 0);
+    ...
+    \endcode
+    
+    \sa wolfSSL_CTX_SetIORecv
+    \sa wolfSSL_CTX_SetIOSend
+    \sa wolfSSL_SetIOReadCtx
+*/
+WOLFSSL_API void wolfSSL_SetIOReadFlags( WOLFSSL* ssl, int flags);
+/*!
+    \brief This function sets the flags for the send callback to use for the 
+    given SSL session.  The send callback could be either the default wolfSSL 
+    EmbedSend callback, or a custom callback specified by the user (see  
+    wolfSSL_CTX_SetIOSend). The default flag value is set internally by wolfSSL 
+    to the value of 0. The default wolfSSL send callback uses the send() 
+    function to send data from the socket.  From the send() man page: “The 
+    flags parameter may include one or more of the following: 
+    #define MSG_OOB 0x1  // process out-of-band data, 
+    #define MSG_DONTROUTE  0x4  // bypass routing, use direct interface. 
+    The flag MSG_OOB is used to send ``out-of-band'' data on sockets that 
+    support this notion (e.g.  SOCK_STREAM); the underlying protocol must also 
+    support ``out-of-band'' data.  MSG_DONTROUTE is usually used only by 
+    diagnostic or routing programs.”
+
+    \return none No returns.
+    
+    \param ssl pointer to the SSL session, created with wolfSSL_new().
+    \param flags value of the I/O send flags for the specified SSL session (ssl).
+    
+    _Example_
+    \code
+    WOLFSSL* ssl = 0;
+    ...
+    // Manually setting send flags to 0
+    wolfSSL_SetIOWriteFlags(ssl, 0);
+    ...
+    \endcode
+    
+    \sa wolfSSL_CTX_SetIORecv
+    \sa wolfSSL_CTX_SetIOSend
+    \sa wolfSSL_SetIOReadCtx
+*/
+WOLFSSL_API void wolfSSL_SetIOWriteFlags(WOLFSSL* ssl, int flags);
+/*!
+    \ingroup IO
+
+    \brief This function sets the nxSocket and nxWait members of the nxCtx 
+    struct within the WOLFSSL structure.
+    
+    \return none No returns.
+    
+    \param ssl a pointer to a WOLFSSL structure, created using wolfSSL_new().
+    \param nxSocket a pointer to type NX_TCP_SOCKET that is set to the 
+    nxSocket member of the nxCTX structure.
+    \param waitOption a ULONG type that is set to the nxWait member of 
+    the nxCtx structure.
+    
+    _Example_
+    \code
+    WOLFSSL* ssl = wolfSSL_new(ctx);
+    NX_TCP_SOCKET* nxSocket;
+    ULONG waitOption;
+    …
+    if(ssl != NULL || nxSocket != NULL || waitOption <= 0){ 
+    wolfSSL_SetIO_NetX(ssl, nxSocket, waitOption);
+    } else {
+    	// You need to pass in good parameters.
+    }
+    \endcode
+    
+    \sa set_fd
+    \sa NetX_Send
+    \sa NetX_Receive
+*/
+    WOLFSSL_API void wolfSSL_SetIO_NetX(WOLFSSL* ssl, NX_TCP_SOCKET* nxsocket,
+                                      ULONG waitoption);
+/*!
+    \brief This function sets the callback for the CBIOCookie member of the 
+    WOLFSSL_CTX structure. The CallbackGenCookie type is a function pointer 
+    and has the signature:	int (*CallbackGenCookie)(WOLFSSL* ssl, unsigned 
+    char* buf, int sz, void* ctx);
+    
+    \return none No returns.
+    
+    \param ssl a pointer to a WOLFSSL structure, created using wolfSSL_new().
+    \param cb a CallbackGenCookie type function pointer with the signature 
+    of CallbackGenCookie.
+    
+    _Example_
+    \code
+    WOLFSSL_CTX* ctx = wolfSSL_CTX_new( method );
+    WOLFSSL* ssl = wolfSSL_new(ctx);
+    …
+    int SetGenCookieCB(WOLFSSL* ssl, unsigned char* buf, int sz, void* ctx){
+	// Callback function body.
+    }
+    …
+    wolfSSL_CTX_SetGenCookie(ssl->ctx, SetGenCookieCB);
+    \endcode
+    
+    \sa CallbackGenCookie
+*/
+    WOLFSSL_API void  wolfSSL_CTX_SetGenCookie(WOLFSSL_CTX*, CallbackGenCookie);
+/*!
+    \ingroup Setup
+
+    \brief This function returns the IOCB_CookieCtx member of the 
+    WOLFSSL structure.
+    
+    \return pointer The function returns a void pointer value stored in 
+    the IOCB_CookieCtx.
+    \return NULL if the WOLFSSL struct is NULL
+    
+    \param ssl a pointer to a WOLFSSL structure, created using wolfSSL_new().
+    
+    _Example_
+    \code
+    WOLFSSL_CTX* ctx = wolfSSL_CTX_new( method );
+    WOLFSSL* ssl = wolfSSL_new(ctx);
+    void* cookie;
+    ...
+    cookie = wolfSSL_GetCookieCtx(ssl);
+    if(cookie != NULL){
+	// You have the cookie
+    }
+    \endcode
+    
+    \sa wolfSSL_SetCookieCtx
+    \sa wolfSSL_CTX_SetGenCookie
+*/
+    WOLFSSL_API void* wolfSSL_GetCookieCtx(WOLFSSL* ssl);