Merge pull request #9451 from kaleb-himes/ESV-DRBG-Decouple

Esv drbg decouple

.codespellexcludelines

@@ -0,0 +1,20 @@
+###############################################################################
+# In this file, you should add the line of the file that needs to be ignored.
+# The line should be exactly as it appears in the file.
+###############################################################################
+        0x0b, 0x45, 0x6e, 0x67, 0x69, 0x6e, 0x65, 0x65, /* .Enginee */
+        0x66, 0x6f, 0x40, 0x77, 0x6f, 0x6c, 0x66, 0x73, /* fo@wolfs */
+        0x0a, 0x8b, 0x98, 0xf3, 0xe3, 0xff, 0x4e, 0x44, /* ......ND */
+ot+3i9DAgBkcRcAtjOj4LaR0VknFBbVPFd5uRHg5h6h+u/N5GJG79G+dwfCMNYxd\n\
+static const byte plaintext[] = "Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras lacus odio, pretium vel sagittis ac, facilisis quis diam. Vivamus condimentum velit sed dolor consequat interdum. Etiam eleifend ornare felis, eleifend egestas odio vulputate eu. Sed nec orci nunc. Etiam quis mi augue. Donec ullamcorper suscipit lorem, vel luctus augue cursus fermentum. Etiam a porta arcu, in convallis sem. Integer efficitur elementum diam, vel scelerisque felis posuere placerat. Donec vestibulum sit amet leo sit amet tincidunt. Etiam et vehicula turpis. Phasellus quis finibus sapien. Sed et tristique turpis. Nullam vitae sagittis tortor, et aliquet lorem. Cras a leo scelerisque, convallis lacus ut, fermentum urna. Mauris quis urna diam. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos. Nam aliquam vehicula orci id pulvinar. Proin mollis, libero sollicitudin tempor ultrices, massa augue tincidunt turpis, sit amet aliquam neque nibh nec dui. Fusce finibus massa quis rutrum suscipit cras amet";
+rsource "Kconfig.tls-generic"
+        /* Loop over authenticated associated data AD1..ADn */
+  /* no easy answer [c'est la vie].  Just division */
+    const uint8_t* hashIn, int hashSz)
+    XMEMCPY(hash + (curveSz - hashSz), hashIn, hashSz);
+        0x63, 0x72, 0x65, 0x65, 0x6e, 0x20, 0x77, 0x6f, 0x75, 0x6c, 0x64, 0x20, 0x62, 0x65, 0x20, 0x69, /* creen would be i */
+\pagenumbering{alph}
+    DES3_KEY_SIZE       = 24,  /* 3 des ede               */
+/* functions added to support above needed, removed TOOM and KARATSUBA */
+#include <sys/systm.h>
+ * extern global version from /usr/src/sys/sys/systm.h */

.cyignore

@@ -0,0 +1,40 @@
+# wolfSSL folders
+$(SEARCH_wolfssl)/IDE
+$(SEARCH_wolfssl)/examples
+$(SEARCH_wolfssl)/linuxkm
+$(SEARCH_wolfssl)/mcapi
+$(SEARCH_wolfssl)/mplabx
+$(SEARCH_wolfssl)/mqx
+$(SEARCH_wolfssl)/tirtos
+$(SEARCH_wolfssl)/tests
+$(SEARCH_wolfssl)/testsuite
+$(SEARCH_wolfssl)/wolfcrypt/src/port/autosar
+$(SEARCH_wolfssl)/zephyr
+
+# wolfSSL files
+$(SEARCH_wolfssl)/wolfcrypt/src/aes_asm.S
+$(SEARCH_wolfssl)/wolfcrypt/src/aes_xts_asm.S
+$(SEARCH_wolfssl)/wolfcrypt/src/aes_gcm_asm.S
+$(SEARCH_wolfssl)/wolfcrypt/src/aes_gcm_x86_asm.S
+$(SEARCH_wolfssl)/wolfcrypt/src/chacha_asm.S
+$(SEARCH_wolfssl)/wolfcrypt/src/fe_x25519_asm.S
+$(SEARCH_wolfssl)/wolfcrypt/src/poly1305_asm.S
+$(SEARCH_wolfssl)/wolfcrypt/src/sha256_asm.S
+$(SEARCH_wolfssl)/wolfcrypt/src/sha512_asm.S
+$(SEARCH_wolfssl)/wolfcrypt/src/sha3_asm.S
+$(SEARCH_wolfssl)/wolfcrypt/src/sm3_asm.S
+$(SEARCH_wolfssl)/wolfcrypt/src/sp_x86_64_asm.S
+$(SEARCH_wolfssl)/wolfcrypt/src/sp_sm2_x86_64_asm.S
+$(SEARCH_wolfssl)/wolfcrypt/src/wc_kyber_asm.S
+
+$(SEARCH_wolfssl)/wolfcrypt/src/port/arm/armv8-32-aes-asm.S
+$(SEARCH_wolfssl)/wolfcrypt/src/port/arm/armv8-32-curve25519.S
+$(SEARCH_wolfssl)/wolfcrypt/src/port/arm/armv8-32-sha256-asm.S
+$(SEARCH_wolfssl)/wolfcrypt/src/port/arm/armv8-32-sha512-asm.S
+$(SEARCH_wolfssl)/wolfcrypt/src/port/arm/armv8-curve25519.S
+$(SEARCH_wolfssl)/wolfcrypt/src/port/arm/armv8-sha3-asm.S
+$(SEARCH_wolfssl)/wolfcrypt/src/port/arm/armv8-sha512-asm.S
+$(SEARCH_wolfssl)/wolfcrypt/src/port/arm/thumb2-aes-asm.S
+$(SEARCH_wolfssl)/wolfcrypt/src/port/arm/thumb2-curve25519.S
+$(SEARCH_wolfssl)/wolfcrypt/src/port/arm/thumb2-sha256-asm.S
+$(SEARCH_wolfssl)/wolfcrypt/src/port/arm/thumb2-sha512-asm.S

.editorconfig

@@ -0,0 +1,10 @@
+# http://editorconfig.org
+root = true
+
+[*]
+indent_style = space
+indent_size = 4
+end_of_line = lf
+charset = utf-8
+trim_trailing_whitespace = true
+insert_final_newline = true

.github/ISSUE_TEMPLATE/bug_report.yaml

@@ -6,8 +6,10 @@ body:
   - type: markdown
     attributes:
       value: >
-        Thanks for reporting an bug. If you would prefer a private method,
-        please email support@wolfssl.com
+        Thanks for reporting a bug. If you would prefer a private method,
+        or if this is a vulnerability report please email support@wolfssl.com
+        instead. This is publicly viewable and not appropriate for vulnerability
+        reports.
   - type: input
     id: contact
     attributes:

.github/ISSUE_TEMPLATE/other.yaml

@@ -6,7 +6,9 @@ body:
     attributes:
       value: >
         Thanks for reporting an issue. If you would prefer a private method,
-        please email support@wolfssl.com
+        or if this is a vulnerability report please email support@wolfssl.com
+        instead. This is publicly viewable and not appropriate for vulnerability
+        reports.
   - type: input
     id: version
     attributes:

.github/workflows/ada.yml

@@ -0,0 +1,34 @@
+name: WolfSSL Ada Build Tests
+
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+jobs:
+  build:
+
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
+
+    steps:
+    - uses: actions/checkout@master
+
+    - name: Install gnat
+      run: |
+        sudo apt-get update
+        sudo apt-get install -y gnat gprbuild
+
+    - name: Checkout wolfssl
+      uses: actions/checkout@master
+      with:
+        repository: wolfssl/wolfssl
+        path: wolfssl
+
+    - name: Build wolfssl Ada
+      working-directory: ./wolfssl/wrapper/Ada
+      run: |
+        mkdir obj
+        gprbuild default.gpr
+        gprbuild examples.gpr

.github/workflows/arduino.yml

@@ -0,0 +1,418 @@
+name: Arduino CI Build (1 of 4) wolfssl
+
+#
+# Test fetches wolfssl-examples/Arduino and uses local, latest github master branch wolfssl
+#
+# These 4 workflows across 3 repos are interdependent for the current $REPO_OWNER:
+#
+# THIS Arduino CI Build 1: https://github.com/$REPO_OWNER/wolfssl          #  /.github/workflows/arduino.yml
+#   - Builds Arduino library from local clone of wolfssl master branch
+#   - Fetches examples from https://github.com/$REPO_OWNER/wolfssl-examples
+#
+# Arduino CI Build 2: https://github.com/$REPO_OWNER/wolfssl-examples      #  /.github/workflows/arduino-release.yml
+#    - Tests examples based on latest published release of Arduino library, NOT latest on wolfssl github.
+#    - Should be identical to Arduino CI Build 3 in every way but wolfssl install.
+#    - Copies only compile script from wolfssl-examples
+#    - Builds local examples
+#    - No other repos used
+#
+# Arduino CI Build 3: https://github.com/$REPO_OWNER/wolfssl-examples      #  /.github/workflows/arduino.yml
+#   - Fetches current wolfSSL from https://github.com/$REPO_OWNER/wolfssl
+#   - Creates an updated Arduino library
+#   - Compiles local examples
+#   - Contains the source of `compile-all-examples.sh` and respective board-list.txt
+#
+# Arduino CI Build 4: https://github.com/$REPO_OWNER/Arduino-wolfssl       #  /.github/workflows/arduino.yml
+#    - Assembles and installs an updated Arduino wolfssl library from LOCAL wolfssl master source
+#    - Copies only compile script copied from wolfssl-examples
+#    - Builds local examples
+#    - No other repos used
+#
+#
+#                                   ** NOTE TO MAINTAINERS **
+#
+#           Consider using winmerge or similar tool to keep the 4 arduino[-release].yml files in relative sync.
+#           Although there are some specific differences, most of the contents are otherwise identical.
+#
+# See https://github.com/wolfSSL/Arduino-wolfSSL
+#
+# To test locally:
+# cd [your WOLFSSL_ROOT], e.g. cd /mnt/c/workspace/wolfssl-$USER
+# [optional checkout]     e.g. git checkout tags/v5.8.4-stable
+# pushd ./IDE/ARDUINO
+# export ARDUINO_ROOT="$HOME/Arduino/libraries"
+# ./wolfssl-arduino.sh INSTALL
+# cd [your WOLFSSL_EXAMPLES_ROOT] e.g. /mnt/c/workspace/wolfssl-examples-$USER
+#
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ '**', 'master', 'main', 'release/**' ]
+    paths:
+      # Specific to this Arduino CI Build (1 of 4)
+      - '.github/workflows/arduino.yml'
+      - 'IDE/ARDUINO/**'
+      - 'src/**'
+      - 'wolfcrypt/**'
+      - 'wolfssl/**'
+  pull_request:
+    branches: [ '**' ]
+    paths:
+      - 'github/workflows/arduino.yml'
+      - 'IDE/ARDUINO/**'
+      - 'src/**'
+      - 'wolfcrypt/**'
+      - 'wolfssl/**'
+  workflow_dispatch:
+
+concurrency:
+  # Same branch push cancels other jobs. Other PR branches untouched
+
+  group: ${{ github.workflow }}-${{ github.ref_name }}
+  cancel-in-progress: true
+
+# END OF COMMON SECTION
+
+jobs:
+  build:
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
+
+    strategy:
+      fail-fast: false
+      matrix:
+        fqbn:
+          # When editing this list, be sure to also edit file: board_list.txt
+          #   The compile-all-examples.sh optionally takes a FQBN parameter to
+          #   optionally compile all examples ONLY for the respective fully qualified board name.
+          # See https://github.com/wolfSSL/wolfssl-examples/blob/master/Arduino/sketches/board_list.txt
+
+          - arduino:avr:ethernet
+          - arduino:avr:leonardoeth
+          - arduino:avr:mega
+          - arduino:avr:nano
+          - arduino:avr:uno
+          - arduino:avr:yun
+          - arduino:samd:mkrwifi1010
+          - arduino:samd:mkr1000
+          - arduino:samd:mkrfox1200
+          - arduino:mbed_edge:edge_control
+          - arduino:mbed_nano:nanorp2040connect
+          - arduino:mbed_portenta:envie_m7
+          - arduino:mbed_portenta:portenta_x8
+          - arduino:renesas_uno:unor4wifi
+          - arduino:sam:arduino_due_x
+          - arduino:samd:arduino_zero_native
+          - arduino:samd:tian
+          - esp32:esp32:esp32
+          - esp32:esp32:esp32s2
+          - esp32:esp32:esp32s3
+          - esp32:esp32:esp32c3
+          - esp32:esp32:esp32c6
+          - esp32:esp32:esp32h2
+          - esp8266:esp8266:generic
+          - teensy:avr:teensy40
+
+          # Not yet supported, not in standard library
+          # - esp32:esp32:nano_nora
+
+          # End strategy matrix
+    env:
+      REPO_OWNER: ${{ github.repository_owner }}
+
+    steps:
+      - name: Checkout Repository
+        uses: actions/checkout@v4
+
+      - name: Install Arduino CLI
+        run: |
+          # Script to fetch and run install.sh from arduino/arduino-cli
+
+          # The install script will test to see if the recently installed apps in the path
+          # So set it up in advance:
+          mkdir -p "${PWD}/bin"
+          echo "${PWD}/bin" >> $GITHUB_PATH
+
+          # Sets the install directory to a consistent path at the repo root.
+          ROOT_BIN="$GITHUB_WORKSPACE/bin"
+
+          # Ensures that BINDIR exists before the installer runs
+          mkdir -p "$ROOT_BIN"
+
+          # Save as a global environment variable
+          echo "$ROOT_BIN" >> "$GITHUB_PATH"
+
+          # Download and run install script from Arduino:
+          # -S show errors; -L follow redirects; -v Verbose
+          set +e                 # don't abort on error
+          set -o pipefail
+
+          curl -vSL --retry 5 --retry-delay 10 \
+             https://raw.githubusercontent.com/arduino/arduino-cli/master/install.sh  \
+             | sh -x
+          rc=$?
+          c_rc=${PIPESTATUS[0]}  # curl's exit code
+          s_rc=${PIPESTATUS[1]}  # sh's  exit code
+
+          set -e                 # restore default abort-on-error
+
+          # If there was a curl error, we have our own local copy that is more reliable and can add our own debugging
+          if [ "$rc" -ne 0 ]; then
+            echo "Primary install failed: curl=$c_rc, sh=$s_rc. Falling back..." >&2
+            echo "Using local copy of arduino_install.sh"
+            pushd ./Arduino/sketches
+              chmod +x ./arduino_install.sh
+
+              # Mimic curl install, does not use current directory:
+              BINDIR="$ROOT_BIN" sh -x ./arduino_install.sh
+            popd
+          else
+            echo "Alternative install script not needed."
+          fi
+
+      - name: Confirm Arduino CLI Install
+        run: arduino-cli version
+
+      - name: Derive CORE_ID (vendor:arch from FQBN)
+        run: |
+          CORE_ID="$(echo '${{ matrix.fqbn }}' | cut -d: -f1-2)"
+          echo "CORE_ID=$CORE_ID" >> "$GITHUB_ENV"
+
+      - name: Setup Arduino CLI
+        run: |
+          arduino-cli config init
+
+          # wait 10 minutes for big downloads (or use 0 for no limit)
+          arduino-cli config set network.connection_timeout 600s
+
+          arduino-cli config add board_manager.additional_urls https://www.pjrc.com/teensy/package_teensy_index.json
+          arduino-cli config add board_manager.additional_urls https://arduino.esp8266.com/stable/package_esp8266com_index.json
+          arduino-cli core update-index
+
+          echo "CORE_ID: $CORE_ID"
+          arduino-cli core install "$CORE_ID"
+
+          # The above is instead of:
+          # arduino-cli core install esp32:esp32            # ESP32
+          # arduino-cli core install arduino:avr            # Arduino Uno, Mega, Nano
+          # arduino-cli core install arduino:sam            # Arduino Due
+          # arduino-cli core install arduino:samd           # Arduino Zero
+          # arduino-cli core install teensy:avr             # PJRC Teensy
+          # arduino-cli core install esp8266:esp8266        # ESP8266
+          # arduino-cli core install arduino:mbed_nano      # nanorp2040connect
+          # arduino-cli core install arduino:mbed_portenta  # portenta_h7_m7
+          # arduino-cli core install arduino:mbed_edge
+          # arduino-cli core install arduino:renesas_uno
+
+          # For reference:
+
+          # mbed nano not yet tested
+          # sudo "/home/$USER/.arduino15/packages/arduino/hardware/mbed_nano/4.2.4/post_install.sh"
+
+          # Always install networking (not part of FQBN matrix)
+          # The first one also creates directory: /home/runner/Arduino/libraries
+          arduino-cli lib install "ArduinoJson"           # Example dependency
+          arduino-cli lib install "WiFiNINA"              # ARDUINO_SAMD_NANO_33_IOT
+          arduino-cli lib install "Ethernet"              # Install Ethernet library
+          arduino-cli lib install "Bridge"                # Pseudo-network for things like arduino:samd:tian
+
+      - name: Set Job Environment Variables
+        run: |
+          # Script to assign some common environment variables after everything is installed
+
+          ICON_OK=$(printf "\xE2\x9C\x85")
+          ICON_FAIL=$(printf "\xE2\x9D\x8C")
+
+          echo "GITHUB_WORK=$(realpath           "$GITHUB_WORKSPACE/../..")"  >> "$GITHUB_ENV"
+          echo "ARDUINO_ROOT=$(realpath          "$HOME/Arduino/libraries")"  >> "$GITHUB_ENV"
+
+          # Show predefined summary:
+          echo "GITHUB_WORKSPACE      = $GITHUB_WORKSPACE"
+
+          # Show assigned build:env values (e.g. "wolfssl", "gojimmpi" or other owners):
+          echo "REPO_OWNER            = $REPO_OWNER"
+
+          echo "GITHUB_ENV=$GITHUB_ENV"
+
+          # Show our custom values:
+          echo "GITHUB_WORK           = $GITHUB_WORK"
+          echo "ARDUINO_ROOT          = $ARDUINO_ROOT"
+
+          # WOLFSSL_EXAMPLES_ROOT is the repo root, not example location
+          echo "WOLFSSL_EXAMPLES_ROOT = $WOLFSSL_EXAMPLES_ROOT"
+
+      - name: Cache Arduino Packages
+        uses: actions/cache@v4
+        with:
+          path: |
+            ~/.arduino15
+            ~/.cache/arduino
+            ~/.arduino15/staging
+
+            # Arduino libraries
+            # Specific to Arduino CI Build (2 of 4) Arduinbo Release wolfSSL for Local Examples
+            # Include all libraries, as the latest Arduino-wolfSSL will only change upon release.
+            ~/Arduino/libraries
+            # Ensure wolfssl is not cached, we're always using the latest. See separate cache.
+            !~/Arduino/libraries/wolfssl
+          key: arduino-${{ runner.os }}-${{ env.CORE_ID }}-${{ hashFiles('Arduino/sketches/board_list.txt') }}
+
+          restore-keys: |
+               arduino-${{ runner.os }}-${{ env.CORE_ID }}-
+               arduino-${{ runner.os }}-
+
+      - name: Get wolfssl-examples
+        run: |
+          # Fetch Arduino examples from the wolfssl-examples repo
+          echo "Start pwd:"
+          pwd
+          # we're typically in $GITHUB_WORKSPACE=/home/runner/work/wolfssl/wolfssl
+          # goto /home/runner/work to fetch wolfssl-examples
+
+          echo "Current pwd for wolfssl-examples clone fetch: $(pwd)"
+          GITHUB_WORK=$(realpath "$GITHUB_WORKSPACE/../..")
+          echo "GITHUB_WORKSPACE=$GITHUB_WORKSPACE"
+
+          # Typically /home/runner/work
+          echo "GITHUB_WORK=$GITHUB_WORK"
+
+          pushd "$GITHUB_WORK"
+            echo "Updated pwd for wolfssl-examples clone fetch: $(pwd)"
+
+            git clone --depth 1 https://github.com/$REPO_OWNER/wolfssl-examples.git wolfssl-examples-publish
+
+            cd ./wolfssl-examples-publish
+            echo "WOLFSSL_EXAMPLES_ROOT=$(pwd)"
+
+            echo "Path for wolfssl-examples-publish: $(pwd)"
+          popd # GITHUB_WORK
+
+
+          # ** END ** Get wolfssl-examples
+
+      - name: Install wolfSSL Arduino library
+        run: |
+          # Run the local wolfssl-arduino.sh install script to install wolfssl Arduino library.
+
+          echo "Installing wolfSSL Arduino library (no cache hit)."
+          rm -rf "$ARDUINO_ROOT/wolfssl"
+
+          # Methods of installing Arduino library:
+          #   1) arduino-cli lib install "wolfSSL"
+          #   2) manual copy of files (typical of the Arduino-wolfssl repo)
+          #   3) run ./wolfssl-arduino.sh INSTALL (typical of the wolfssl repo)
+
+          echo "Current pwd for wolfssl-examples clone fetch: $(pwd)"
+          GITHUB_WORK=$(realpath "$GITHUB_WORKSPACE/../..")
+          echo "GITHUB_WORKSPACE=$GITHUB_WORKSPACE"
+
+          # Typically /home/runner/work
+          echo "GITHUB_WORK=$GITHUB_WORK"
+          pwd
+          pushd ./IDE/ARDUINO
+
+            # Set default ARDUINO_ROOT to Arduino library.
+            export ARDUINO_ROOT="$HOME/Arduino/libraries"
+            export WOLFSSL_EXAMPLES_ROOT="$GITHUB_WORK/wolfssl-examples-publish"
+
+            echo "ARDUINO_ROOT:          $WOLFSSL_EXAMPLES_ROOT"
+            echo "WOLFSSL_EXAMPLES_ROOT: $WOLFSSL_EXAMPLES_ROOT"
+
+            bash ./wolfssl-arduino.sh INSTALL  # Install wolfSSL library
+          popd
+
+          # ** END ** Install wolfSSL Arduino library
+
+      - name: List installed Arduino libraries
+        run: arduino-cli lib list
+
+      - name: Get compile-all-examples.sh
+        run: |
+          # Fetch compile script FROM THE CURRENT OWNER.
+          # This repo is Arduino-wolfssl; we'll fetch the script from the wolfssl-examples for the same repository owner.
+          echo "Repository owner: $REPO_OWNER"
+          echo "Current directory: $PWD"
+          echo "Current pwd for wolfssl-examples clone fetch: $PWD"
+          WOLFSSL_EXAMPLES_DIRECTORY="$ARDUINO_ROOT/wolfssl/examples"
+          THIS_BOARD_LIST="board_list.txt"
+          echo "WOLFSSL_EXAMPLES_DIRECTORY=$WOLFSSL_EXAMPLES_DIRECTORY"
+
+          # Fetch script and board list into WOLFSSL_EXAMPLES_DIRECTORY
+          echo "Fetching board_list.txt from REPO_OWNER=$REPO_OWNER"
+          curl -L "https://raw.githubusercontent.com/$REPO_OWNER/wolfssl-examples/master/Arduino/sketches/board_list.txt"  \
+               -o "$WOLFSSL_EXAMPLES_DIRECTORY/$THIS_BOARD_LIST"
+
+          # Check if the first line is "404: Not Found" - which would indicate the curl path above is bad.
+          FILE="$WOLFSSL_EXAMPLES_DIRECTORY/board_list.txt"
+
+          # Ensure the file exists
+          if [[ ! -f "$FILE" ]]; then
+              echo "File not found: $FILE"
+              exit 1
+          fi
+
+          # Check if the first line is "404: Not Found"
+          if [[ $(head -n 1 "$FILE") == "404: Not Found" ]]; then
+              echo "The first line is '404: Not Found'"
+              exit 1
+          fi
+
+          # Fetch the compile script from repo: https://github.com/[$USER]/wolfssl-examples/
+          echo "Fetching compile-all-examples.sh from REPO_OWNER=$REPO_OWNER"
+          curl -L "https://raw.githubusercontent.com/$REPO_OWNER/wolfssl-examples/master/Arduino/sketches/compile-all-examples.sh"  \
+               -o "$WOLFSSL_EXAMPLES_DIRECTORY/compile-all-examples.sh"
+
+          # Check if the first line is "404: Not Found" - which would indicate the curl path above is bad.
+          FILE="$WOLFSSL_EXAMPLES_DIRECTORY/compile-all-examples.sh"
+
+          # Ensure the file exists
+          if [[ ! -f "$FILE" ]]; then
+              echo "File not found: $FILE"
+              exit 1
+          fi
+
+          # Check if the first line is "404: Not Found"
+          if [[ $(head -n 1 "$FILE") == "404: Not Found" ]]; then
+              echo "The first line is '404: Not Found'"
+              exit 1
+          fi
+
+          pushd "$WOLFSSL_EXAMPLES_DIRECTORY"
+            echo "Current directory:           $PWD"
+
+            echo "Current directory $PWD"
+            echo "Contents:"
+            ls -al
+            find ./ -type f | sort
+
+            # ensure we can execute the script here (permissions lost during curl fetch)
+            chmod +x ./compile-all-examples.sh
+            echo "Found compile script: $(ls -al ./compile-all-examples.sh ./$THIS_BOARD_LIST)"
+          popd
+
+          # ** END ** Get compile-all-examples.sh
+
+      # This will fail with Arduino published wolfSSL v5.7.6 and older
+      # as the examples moved. See https://github.com/wolfSSL/wolfssl/pull/8514
+      #
+      - name: Compile Arduino Sketches for Various Boards
+        run: |
+          # Call the compile-all-examples.sh script to compile all the examples for each of the fqbn names in the local copy of board_list.txt
+
+          echo "Current directory:           $PWD"
+          echo "ARDUINO_ROOT:                $ARDUINO_ROOT"
+          WOLFSSL_EXAMPLES_DIRECTORY="$ARDUINO_ROOT/wolfssl/examples"
+          echo "WOLFSSL_EXAMPLES_DIRECTORY:  $WOLFSSL_EXAMPLES_DIRECTORY"
+
+          echo "Change directory to Arduino examples..."
+          pushd "$WOLFSSL_EXAMPLES_DIRECTORY"
+            chmod +x ./compile-all-examples.sh
+
+            # The script expects all the examples to be in the current directory.
+            # Along with ./board_list.txt from examples repo
+            echo "Current directory:           $PWD"
+            echo "Calling ./compile-all-examples.sh"
+            bash ./compile-all-examples.sh  ./board_list.txt "${{ matrix.fqbn }}"
+          popd
+          # End Compile Arduino Sketches for Various Boards

.github/workflows/async.yml

@@ -1,7 +1,16 @@
 name: Async Tests
 
+# START OF COMMON SECTION
 on:
-  workflow_call:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
 
 jobs:
   make_check:
@@ -9,22 +18,26 @@ jobs:
       matrix:
         config: [
           # Add new configs here
-          '--enable-asynccrypt --enable-all --enable-dtls13',
-          '--enable-asynccrypt-sw',
+          '--enable-asynccrypt --enable-all --enable-dtls13 CFLAGS="-pedantic -Wdeclaration-after-statement -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE -DWOLFCRYPT_TEST_LINT"',
+          '--enable-asynccrypt-sw --enable-ocspstapling --enable-ocspstapling2 CFLAGS="-pedantic -Wdeclaration-after-statement -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE"',
+          '--enable-ocsp CFLAGS="-DTEST_NONBLOCK_CERTS -pedantic -Wdeclaration-after-statement -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE"',
         ]
     name: make check
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 6
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
         name: Checkout wolfSSL
 
       - name: Test wolfSSL async
         run: |
-          ./async-check.sh setup
+          ./async-check.sh install
           ./configure ${{ matrix.config }}
           make check
 
-      - name: Print errors 
+      - name: Print errors
         if: ${{ failure() }}
         run: |
           if [ -f test-suite.log ] ; then

.github/workflows/bind.yml

@@ -0,0 +1,93 @@
+name: bind9 Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-all
+          install: true
+          check: false
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-bind
+          path: build-dir.tgz
+          retention-days: 5
+
+  bind_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        # List of releases to test
+        ref: [ 9.18.0, 9.18.28, 9.18.33 ]
+    name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 10
+    needs: build_wolfssl
+    steps:
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-bind
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Install dependencies
+        run: |
+          # Don't prompt for anything
+          export DEBIAN_FRONTEND=noninteractive
+          sudo apt-get update
+          # hostap dependencies
+          sudo apt-get install -y libuv1-dev libnghttp2-dev libcap-dev libcmocka-dev
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Checkout bind9
+        uses: actions/checkout@v4
+        with:
+          repository: isc-projects/bind9
+          path: bind
+          ref: v${{ matrix.ref }}
+
+      - name: Build and test bind9
+        working-directory: bind
+        run: |
+          export PKG_CONFIG_PATH=$GITHUB_WORKSPACE/build-dir/lib/pkgconfig
+          patch -p1 < $GITHUB_WORKSPACE/osp/bind9/${{ matrix.ref }}.patch
+          autoreconf -ivf
+          ./configure --with-wolfssl
+          sed -i 's/SUBDIRS = system//g' bin/tests/Makefile # remove failing tests
+          make -j V=1
+          make -j V=1 check

.github/workflows/cmake.yml

@@ -0,0 +1,109 @@
+name: WolfSSL CMake Build Tests
+
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+jobs:
+  build:
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
+
+    steps:
+# pull wolfSSL
+    - uses: actions/checkout@master
+
+# install cmake
+    - name: Install cmake
+      run: |
+        sudo apt-get update
+        sudo apt-get install -y cmake
+
+# pull wolfssl
+    - name: Checkout wolfssl
+      uses: actions/checkout@master
+      with:
+        repository: wolfssl/wolfssl
+        path: wolfssl
+
+# build wolfssl
+    - name: Build wolfssl
+      working-directory: ./wolfssl
+      run: |
+        mkdir build
+        cd build
+        cmake -DCMAKE_VERBOSE_MAKEFILE:BOOL=ON -DWOLFSSL_INSTALL=yes -DCMAKE_INSTALL_PREFIX="$GITHUB_WORKSPACE/install" \
+            -DWOLFSSL_16BIT:BOOL=no -DWOLFSSL_32BIT:BOOL=no -DWOLFSSL_AES:BOOL=yes \
+            -DWOLFSSL_AESCBC:BOOL=yes -DWOLFSSL_AESCCM:BOOL=yes -DWOLFSSL_AESCFB:BOOL=yes \
+            -DWOLFSSL_AESCTR:BOOL=yes -DWOLFSSL_AESGCM:STRING=yes -DWOLFSSL_AESKEYWRAP:BOOL=yes \
+            -DWOLFSSL_AESOFB:BOOL=yes -DWOLFSSL_AESSIV:BOOL=yes -DWOLFSSL_ALIGN_DATA:BOOL=yes \
+            -DWOLFSSL_ALPN:BOOL=ON -DWOLFSSL_ALT_CERT_CHAINS:BOOL=ON -DWOLFSSL_ARC4:BOOL=yes \
+            -DWOLFSSL_ARIA:BOOL=no -DWOLFSSL_ASIO:BOOL=no -DWOLFSSL_ASM:BOOL=yes -DWOLFSSL_ASN:BOOL=yes \
+            -DWOLFSSL_ASYNC_THREADS:BOOL=no -DWOLFSSL_BASE64_ENCODE:BOOL=yes -DWOLFSSL_CAAM:BOOL=no \
+            -DWOLFSSL_CERTEXT:BOOL=yes -DWOLFSSL_CERTGEN:BOOL=yes -DWOLFSSL_CERTGENCACHE:BOOL=no \
+            -DWOLFSSL_CERTREQ:BOOL=yes -DWOLFSSL_CHACHA:STRING=yes -DWOLFSSL_CMAC:BOOL=yes \
+            -DWOLFSSL_CODING:BOOL=yes -DWOLFSSL_CONFIG_H:BOOL=yes -DWOLFSSL_CRL:STRING=yes \
+            -DWOLFSSL_CRYPTOCB:BOOL=yes -DWOLFSSL_CRYPTOCB_NO_SW_TEST:BOOL=no \
+            -DWOLFSSL_CRYPT_TESTS:BOOL=yes -DWOLFSSL_CRYPT_TESTS_HELP:BOOL=no \
+            -DWOLFSSL_CRYPT_TESTS_LIBS:BOOL=no -DWOLFSSL_CURL:BOOL=yes -DWOLFSSL_CURVE25519:STRING=yes \
+            -DWOLFSSL_CURVE448:STRING=yes -DWOLFSSL_DEBUG:BOOL=yes -DWOLFSSL_DES3:BOOL=ON \
+            -DWOLFSSL_DES3_TLS_SUITES:BOOL=no -DWOLFSSL_DH:STRING=yes -DWOLFSSL_DH_DEFAULT_PARAMS:BOOL=yes \
+            -DWOLFSSL_DSA:BOOL=yes -DWOLFSSL_DTLS:BOOL=ON -DWOLFSSL_DTLS13:BOOL=yes \
+            -DWOLFSSL_DTLS_CID:BOOL=yes -DWOLFSSL_ECC:STRING=yes \
+            -DWOLFSSL_ECCCUSTCURVES:STRING=all -DWOLFSSL_ECCSHAMIR:BOOL=yes \
+            -DWOLFSSL_ECH:BOOL=yes -DWOLFSSL_ED25519:BOOL=yes -DWOLFSSL_ED448:STRING=yes \
+            -DWOLFSSL_ENCKEYS:BOOL=yes -DWOLFSSL_ENC_THEN_MAC:BOOL=yes -DWOLFSSL_ERROR_QUEUE:BOOL=yes \
+            -DWOLFSSL_ERROR_STRINGS:BOOL=yes -DWOLFSSL_EXAMPLES:BOOL=yes -DWOLFSSL_EXPERIMENTAL:BOOL=yes \
+            -DWOLFSSL_EXTENDED_MASTER:BOOL=yes -DWOLFSSL_EX_DATA:BOOL=yes -DWOLFSSL_FAST_MATH:BOOL=no \
+            -DWOLFSSL_FILESYSTEM:BOOL=yes -DWOLFSSL_HARDEN:BOOL=yes -DWOLFSSL_HASH_DRBG:BOOL=yes \
+            -DWOLFSSL_HKDF:BOOL=yes -DWOLFSSL_HPKE:BOOL=yes -DWOLFSSL_HRR_COOKIE:STRING=yes \
+            -DWOLFSSL_INLINE:BOOL=yes -DWOLFSSL_INSTALL:BOOL=yes -DWOLFSSL_IP_ALT_NAME:BOOL=ON \
+            -DWOLFSSL_KEYGEN:BOOL=yes -DWOLFSSL_KEYING_MATERIAL:BOOL=ON \
+            -DWOLFSSL_MD4:BOOL=ON -DWOLFSSL_MD5:BOOL=yes -DWOLFSSL_MEMORY:BOOL=yes -DWOLFSSL_NO_STUB:BOOL=no \
+            -DWOLFSSL_OAEP:BOOL=yes -DWOLFSSL_OCSP:BOOL=yes -DWOLFSSL_OCSPSTAPLING:BOOL=ON \
+            -DWOLFSSL_OCSPSTAPLING_V2:BOOL=ON -DWOLFSSL_OLD_NAMES:BOOL=yes -DWOLFSSL_OLD_TLS:BOOL=yes \
+            -DWOLFSSL_OPENSSLALL:BOOL=yes -DWOLFSSL_OPENSSLEXTRA:BOOL=ON -DWOLFSSL_OPTFLAGS:BOOL=yes \
+            -DWOLFSSL_OQS:BOOL=no -DWOLFSSL_PKCALLBACKS:BOOL=yes -DWOLFSSL_PKCS12:BOOL=yes \
+            -DWOLFSSL_PKCS7:BOOL=yes -DWOLFSSL_POLY1305:BOOL=yes -DWOLFSSL_POSTAUTH:BOOL=yes \
+            -DWOLFSSL_PWDBASED:BOOL=yes -DWOLFSSL_QUIC:BOOL=yes -DWOLFSSL_REPRODUCIBLE_BUILD:BOOL=no \
+            -DWOLFSSL_RNG:BOOL=yes -DWOLFSSL_RSA:BOOL=yes -DWOLFSSL_RSA_PSS:BOOL=yes \
+            -DWOLFSSL_SESSION_TICKET:BOOL=ON -DWOLFSSL_SHA:BOOL=yes -DWOLFSSL_SHA224:BOOL=yes \
+            -DWOLFSSL_SHA3:STRING=yes -DWOLFSSL_SHA384:BOOL=yes -DWOLFSSL_SHA512:BOOL=yes \
+            -DWOLFSSL_SHAKE128:STRING=yes -DWOLFSSL_SHAKE256:STRING=yes -DWOLFSSL_SINGLE_THREADED:BOOL=no \
+            -DWOLFSSL_SNI:BOOL=yes -DWOLFSSL_SP_MATH_ALL:BOOL=yes -DWOLFSSL_SRTP:BOOL=yes \
+            -DWOLFSSL_STUNNEL:BOOL=yes -DWOLFSSL_SUPPORTED_CURVES:BOOL=yes -DWOLFSSL_SYS_CA_CERTS:BOOL=yes \
+            -DWOLFSSL_TICKET_NONCE_MALLOC:BOOL=yes -DWOLFSSL_TLS13:BOOL=yes -DWOLFSSL_TLSV12:BOOL=yes \
+            -DWOLFSSL_TLSX:BOOL=yes -DWOLFSSL_TPM:BOOL=yes -DWOLFSSL_CLU:BOOL=yes -DWOLFSSL_USER_SETTINGS:BOOL=no \
+            -DWOLFSSL_USER_SETTINGS_ASM:BOOL=no -DWOLFSSL_WOLFSSH:BOOL=ON -DWOLFSSL_X86_64_BUILD_ASM:BOOL=yes \
+            -DWOLFSSL_MLKEM=1 -DWOLFSSL_LMS=1 -DWOLFSSL_LMSSHA256192=1 -DWOLFSSL_EXPERIMENTAL=1 \
+            -DWOLFSSL_X963KDF:BOOL=yes \
+            -DCMAKE_C_FLAGS="-DWOLFSSL_DTLS_CH_FRAG" \
+            ..
+        cmake --build .
+        ctest -j $(nproc)
+        cmake --install .
+
+        # clean up
+        cd ..
+        rm -rf build
+
+        # Kyber Cmake broken
+        # -DWOLFSSL_KYBER:BOOL=yes
+
+# build "lean-tls" wolfssl
+    - name: Build wolfssl with lean-tls
+      working-directory: ./wolfssl
+      run: |
+        mkdir build
+        cd build
+        cmake -DCMAKE_VERBOSE_MAKEFILE:BOOL=ON -DWOLFSSL_INSTALL=yes -DCMAKE_INSTALL_PREFIX="$GITHUB_WORKSPACE/install" \
+            -DWOLFSSL_LEAN_TLS:BOOL=yes \
+            ..
+        cmake --build .
+        cmake --install .
+
+        # clean up
+        cd ..
+        rm -rf build

.github/workflows/codespell.yml

@@ -0,0 +1,30 @@
+name: Codespell test
+
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  codespell:
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    steps:
+    - uses: actions/checkout@v4
+
+    - uses: codespell-project/actions-codespell@v2.1
+      with:
+        check_filenames: true
+        check_hidden: true
+          # Add comma separated list of words that occur multiple times that should be ignored (sorted alphabetically, case sensitive)
+        ignore_words_list: adin,aNULL,brunch,carryIn,chainG,ciph,cLen,cliKs,dout,haveA,inCreated,inOut,inout,larg,LEAPYEAR,Merget,optionA,parm,parms,repid,rIn,userA,ser,siz,te,Te,
+          # The exclude_file contains lines of code that should be ignored. This is useful for individual lines which have non-words that can safely be ignored.
+        exclude_file: '.codespellexcludelines'
+          # To skip files entirely from being processed, add it to the following list:
+        skip: '*.cproject,*.der,*.mtpj,*.pem,*.vcxproj,.git,*.launch,*.scfg,*.revoked,./examples/asn1/dumpasn1.cfg,./examples/asn1/oid_names.h'

.github/workflows/coverity-scan-fixes.yml

@@ -0,0 +1,53 @@
+name: Coverity Scan master branch
+
+on:
+  workflow_dispatch:
+  schedule:
+    - cron: '0 0 * * 1-5'
+    - cron: '0 0 * * 0'
+    - cron: '0 12 * * 0'
+
+jobs:
+  coverity:
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    steps:
+    - uses: actions/checkout@v4
+      with:
+        ref: master
+
+    - name: Configure wolfSSL with enable-all M-F
+      if: github.event.schedule == '0 0 * * 1-5'
+      run: |
+        ./autogen.sh
+        ./configure --enable-all
+
+    - name: Configure wolfSSL with enable-all enable-smallstack Sun at 00:00
+      if: github.event.schedule == '0 0 * * 0'
+      run: |
+        ./autogen.sh
+        ./configure --enable-all --enable-smallstack
+
+    - name: Configure wolfSSL with bigendian Sun at 12:00
+      if: github.event.schedule == '0 12 * * 0'
+      run: |
+        ./autogen.sh
+        ./configure --enable-all CFLAGS="-DBIG_ENDIAN_ORDER"
+
+    - name: Check secrets
+      env:
+        token_var: ${{ secrets.COVERITY_SCAN_TOKEN }}
+        email_var: ${{ secrets.COVERITY_SCAN_EMAIL }}
+      run: |
+        token_len=${#token_var}
+        echo "$token_len"
+        email_len=${#email_var}
+        echo "$email_len"
+
+    - uses: vapier/coverity-scan-action@v1
+      with:
+        build_language: 'cxx'
+        project: "wolfSSL/wolfssl"
+        token: ${{ secrets.COVERITY_SCAN_TOKEN }}
+        email: ${{ secrets.COVERITY_SCAN_EMAIL }}
+        command: "make"

.github/workflows/curl.yml

@@ -0,0 +1,76 @@
+name: curl Test
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-curl
+          install: true
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-curl
+          path: build-dir.tgz
+          retention-days: 5
+
+  test_curl:
+    name: ${{ matrix.curl_ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 15
+    needs: build_wolfssl
+    strategy:
+      fail-fast: false
+      matrix:
+        curl_ref: [ 'master', 'curl-8_4_0' ]
+    steps:
+    - name: Install test dependencies
+      run: |
+        sudo apt-get update
+        sudo apt-get install nghttp2 libpsl5 libpsl-dev python3-impacket apache2 apache2-dev
+
+    - name: Download lib
+      uses: actions/download-artifact@v4
+      with:
+        name: wolf-install-curl
+
+    - name: untar build-dir
+      run: tar -xf build-dir.tgz
+
+    - name: Build curl
+      uses: wolfSSL/actions-build-autotools-project@v1
+      with:
+        repository: curl/curl
+        path: curl
+        ref: ${{ matrix.curl_ref }}
+        configure: --with-wolfssl=$GITHUB_WORKSPACE/build-dir --with-test-httpd=yes
+        check: false
+
+    - name: Test curl
+      working-directory: curl
+      run: make -j $(nproc) test-nonflaky

.github/workflows/cyrus-sasl.yml

@@ -0,0 +1,105 @@
+name: cyrus-sasl Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-all
+          install: true
+          # Don't run tests as this config is tested in many other places
+          check: false
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-sasl
+          path: build-dir.tgz
+          retention-days: 5
+
+  sasl_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        # List of releases to test
+        ref: [ 2.1.28 ]
+    name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    needs: build_wolfssl
+    steps:
+      - name: Install dependencies
+        run: |
+          # Don't prompt for anything
+          export DEBIAN_FRONTEND=noninteractive
+          sudo apt-get update
+          sudo apt-get install krb5-kdc krb5-otp libkrb5-dev \
+            libsocket-wrapper libnss-wrapper krb5-admin-server libdb5.3-dev
+
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-sasl
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Checkout sasl
+        uses: actions/checkout@v4
+        with:
+          repository: cyrusimap/cyrus-sasl
+          ref: cyrus-sasl-${{ matrix.ref }}
+          path: sasl
+
+      - name: Build cyrus-sasl
+        working-directory: sasl
+        run: |
+          patch -p1 < $GITHUB_WORKSPACE/osp/cyrus-sasl/${{ matrix.ref }}/${{ matrix.ref }}.patch
+          autoreconf -ivf
+          ./configure --with-openssl=no --with-wolfssl=$GITHUB_WORKSPACE/build-dir --with-dblib=berkeley --disable-shared
+          # Need to run 'make' twice with '--disable-shared' for some reason
+          make -j || make -j
+
+      - name: Run testsuite
+        working-directory: sasl
+        run: |
+          make -j -C utils testsuite saslpasswd2
+          # Retry up to five times
+          for i in {1..5}; do
+             TEST_RES=0
+             $GITHUB_WORKSPACE/osp/cyrus-sasl/${{ matrix.ref }}/run-tests.sh || TEST_RES=$?
+             if [ "$TEST_RES" -eq "0" ]; then
+                break
+             fi
+          done

.github/workflows/disable-pk-algs.yml

@@ -0,0 +1,63 @@
+name: disable-pk-algs Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  make_check:
+    strategy:
+      matrix:
+        config: [
+          # Add new configs here
+          '--disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-rsa --enable-dh',
+          '--disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-ecc',
+          '--disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-rsa --enable-curve25519',
+          '--disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-ecc --enable-curve25519',
+          '--disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-rsa --enable-curve448',
+          '--disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-ecc --enable-curve448',
+          '--disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-curve25519 --enable-ed25519',
+          '--disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-curve448 --enable-ed448',
+          '-enable-cryptonly  --disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-rsa',
+          '--enable-cryptonly  --disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-dh',
+          '--enable-cryptonly  --disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-ecc',
+          '--enable-cryptonly  --disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-curve25519',
+          '--enable-cryptonly  --disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-ed25519',
+          '--enable-cryptonly  --disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-curve448',
+          '--enable-cryptonly  --disable-rsa --disable-dh --disable-ecc --disable-curve25519 --disable-ed25519 --disable-curve448 --disable-ed448 --enable-ed448',
+        ]
+    name: make check
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 6
+    steps:
+      - uses: actions/checkout@v4
+        name: Checkout wolfSSL
+
+      - name: Test wolfSSL
+        run: |
+          ./autogen.sh
+          ./configure ${{ matrix.config }}
+          make -j 4
+          make check
+
+      - name: Print errors
+        if: ${{ failure() }}
+        run: |
+          for file in scripts/*.log
+          do
+              if [ -f "$file" ]; then
+                  echo "${file}:"
+                  cat "$file"
+                  echo "========================================================================"
+              fi
+          done

.github/workflows/disabled/haproxy.yml

@@ -0,0 +1,60 @@
+name: HaProxy Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  haproxy_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        # List of refs to test
+        ref: [ master ]
+    name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-quic --enable-haproxy
+          install: true
+
+      - name: Checkout VTest
+        uses: actions/checkout@v4
+        with:
+          repository: vtest/VTest
+          path: VTest
+
+      - name: Build VTest
+        working-directory: VTest
+        # Special flags due to: https://github.com/vtest/VTest/issues/12
+        run: make FLAGS='-O2 -s -Wall'
+
+      - name: Checkout HaProxy
+        uses: actions/checkout@v4
+        with:
+          repository: haproxy/haproxy
+          path: haproxy
+          ref: ${{ matrix.ref }}
+
+      - name: Build HaProxy
+        working-directory: haproxy
+        run: >-
+          make -j TARGET=linux-glibc DEBUG='-DDEBUG_MEMORY_POOLS -DDEBUG_STRICT'
+          USE_OPENSSL_WOLFSSL=1 USE_QUIC=1 SSL_INC=$GITHUB_WORKSPACE/build-dir/include/
+          SSL_LIB=$GITHUB_WORKSPACE/build-dir/lib/ ADDLIB=-Wl,-rpath=$GITHUB_WORKSPACE/build-dir/lib
+
+      - name: Test HaProxy
+        working-directory: haproxy
+        run: make reg-tests reg-tests/ssl VTEST_PROGRAM=$GITHUB_WORKSPACE/VTest/vtest

.github/workflows/disabled/hitch.yml

@@ -0,0 +1,110 @@
+name: hitch Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-latest
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-hitch
+          install: true
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-hitch
+          path: build-dir.tgz
+          retention-days: 5
+
+  hitch_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        # List of releases to test
+        include:
+          - ref: 1.7.3
+            ignore-tests: >-
+              test13-r82.sh test15-proxy-v2-npn.sh test39-client-cert-proxy.sh
+    name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    needs: build_wolfssl
+    steps:
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-hitch
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Install dependencies
+        run: |
+            export DEBIAN_FRONTEND=noninteractive
+            sudo apt-get update
+            sudo apt-get install -y libev-dev libssl-dev automake python3-docutils flex bison pkg-config make
+
+      - name: Checkout hitch
+        uses: actions/checkout@v4
+        with:
+          repository: varnish/hitch
+          ref: 1.7.3
+          path: hitch
+
+      # Do this before configuring so that it only detects the updated list of
+      # tests
+      - if: ${{ matrix.ignore-tests }}
+        name: Remove tests that we want to ignore
+        working-directory: ./hitch/src/tests
+        run: |
+          rm ${{ matrix.ignore-tests }}
+
+      - name: Configure and build hitch
+        run: |
+            cd $GITHUB_WORKSPACE/hitch/
+            patch -p1 < $GITHUB_WORKSPACE/osp/hitch/hitch_1.7.3.patch
+            autoreconf -ivf
+            SSL_CFLAGS="-I$GITHUB_WORKSPACE/build-dir/include/ -I$GITHUB_WORKSPACE/build-dir/include/wolfssl" SSL_LIBS="-L$GITHUB_WORKSPACE/build-dir/lib -lwolfssl" ./configure --with-wolfssl=$GITHUB_WORKSPACE/build-dir/ --enable-silent-rules --enable-documentation --enable-warnings --with-lex --with-yacc --prefix=$GITHUB_WORKSPACE/build-dir
+            make -j$(nproc)
+
+      - name: Confirm hitch built with wolfSSL
+        working-directory: ./hitch
+        run: |
+          export LD_LIBRARY_PATH=$GITHUB_WORKSPACE/build-dir/lib:$LD_LIBRARY_PATH
+          ldd src/hitch | grep wolfssl
+
+      - name: Run hitch tests, skipping ignored tests
+        working-directory: ./hitch
+        run: |
+          export LD_LIBRARY_PATH=$GITHUB_WORKSPACE/build-dir/lib:$LD_LIBRARY_PATH
+          make check

.github/workflows/disabled/hostap.yml

@@ -1,7 +1,16 @@
 name: hostap and wpa-supplicant Tests
 
+# START OF COMMON SECTION
 on:
-  workflow_call:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
 
 jobs:
   build_wolfssl:
@@ -13,8 +22,11 @@ jobs:
           - build_id: hostap-build2
             wolf_extra_config: --enable-brainpool --enable-wpas-dpp
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
     runs-on: ubuntu-20.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
     steps:
         # No way to view the full strategy in the browser (really weird)
       - name: Print strategy
@@ -38,11 +50,11 @@ jobs:
           install: true
 
       - name: Upload built lib
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
         with:
           name: ${{ matrix.build_id }}
           path: build-dir
-          retention-days: 1
+          retention-days: 5
 
   # Build wpa_supplicant with wolfSSL and hostapd with OpenSSL and interop.
   hostap_test:
@@ -60,7 +72,7 @@ jobs:
         config: [
           {
             hostap_ref: hostap_2_10,
-            hostap_cherry_pick: 5679ec5c3dda25a0547a5f66407fd9b0b55fd04a,
+            hostap_cherry_pick: 36fcbb1a4ee4aa604f15079eae2ffa4fe7f44680,
             remove_teap: true,
             # TLS 1.3 does not work for this version
             build_id: hostap-build1,
@@ -68,7 +80,7 @@ jobs:
           # Test the dpp patch
           {
             hostap_ref: b607d2723e927a3446d89aed813f1aa6068186bb,
-            hostap_cherry_pick: 5679ec5c3dda25a0547a5f66407fd9b0b55fd04a,
+            hostap_cherry_pick: 36fcbb1a4ee4aa604f15079eae2ffa4fe7f44680,
             osp_ref: ad5b52a49b3cc2a5bfb47ccc1d6a5137132e9446,
             build_id: hostap-build2
           },
@@ -88,8 +100,11 @@ jobs:
               build_id: hostap-build2
             }
     name: hwsim test
+    if: github.repository_owner == 'wolfssl'
     # For openssl 1.1
     runs-on: ubuntu-20.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 12
     needs: build_wolfssl
     steps:
         # No way to view the full strategy in the browser (really weird)
@@ -109,7 +124,7 @@ jobs:
           echo Our job run ID is $SHA_SUM
 
       - name: Checkout wolfSSL
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
         with:
           path: wolfssl
 
@@ -136,7 +151,7 @@ jobs:
           echo "hostap_debug_flags=-d" >> $GITHUB_ENV
 
       - name: Download lib
-        uses: actions/download-artifact@v3
+        uses: actions/download-artifact@v4
         with:
           name: ${{ matrix.config.build_id }}
           path: build-dir
@@ -166,9 +181,9 @@ jobs:
           sudo rmmod mac80211_hwsim
 
       - name: Checkout hostap
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
         with:
-          repository: julek-wolfssl/hostap-mirror 
+          repository: julek-wolfssl/hostap-mirror
           path: hostap
           ref: ${{ matrix.config.hostap_ref }}
           # necessary for cherry pick step
@@ -181,7 +196,7 @@ jobs:
 
       - if: ${{ matrix.config.osp_ref }}
         name: Checkout OSP
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
         with:
           repository: wolfssl/osp
           path: osp
@@ -197,7 +212,7 @@ jobs:
           done
 
       - if: ${{ matrix.hostapd }}
-        name: Setup hostapd config file 
+        name: Setup hostapd config file
         run: |
           cp wolfssl/.github/workflows/hostap-files/configs/${{ matrix.config.hostap_ref }}/hostapd.config \
              hostap/hostapd/.config
@@ -207,7 +222,7 @@ jobs:
           EOF
 
       - if: ${{ matrix.wpa_supplicant }}
-        name: Setup wpa_supplicant config file 
+        name: Setup wpa_supplicant config file
         run: |
           cp wolfssl/.github/workflows/hostap-files/configs/${{ matrix.config.hostap_ref }}/wpa_supplicant.config \
              hostap/wpa_supplicant/.config
@@ -246,7 +261,7 @@ jobs:
             TESTS=$(printf '%s\n' "${ary[@]}" | tr '\n' ' ')
             # Retry up to three times
             for i in {1..3}; do
-              HWSIM_RES=0
+              HWSIM_RES=0 # Not set when command succeeds
               # Logs can grow quickly especially in debug mode
               sudo rm -rf logs
               sudo ./start.sh
@@ -271,7 +286,7 @@ jobs:
 
       - name: Upload failure logs
         if: ${{ failure() && steps.testing.outcome == 'failure' }}
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
         with:
           name: hostap-logs-${{ env.our_job_run_id }}
           path: hostap/tests/hwsim/logs.zip

.github/workflows/docker-Espressif.yml

@@ -1,32 +1,48 @@
 name: Espressif examples tests
+# START OF COMMON SECTION
 on:
-  workflow_call:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
 
 jobs:
   espressif_latest:
     name: latest Docker container
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 12
     container:
-      image: espressif/idf:latest
+      # The latest stable release is v5.5
+      image: espressif/idf:release-v5.5
+      # image: espressif/idf:latest # The "latest" has breaking changes for ESP-IDF V6
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - name: Initialize Espressif IDE and build examples
-        run: . /opt/esp/idf/export.sh; IDE/Espressif/ESP-IDF/compileAllExamples.sh
+        run: cd /opt/esp/idf && . ./export.sh && cd $GITHUB_WORKSPACE; IDE/Espressif/ESP-IDF/compileAllExamples.sh
   espressif_v4_4:
     name: v4.4 Docker container
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     container:
       image: espressif/idf:release-v4.4
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - name: Initialize Espressif IDE and build examples
-        run: . /opt/esp/idf/export.sh; IDE/Espressif/ESP-IDF/compileAllExamples.sh
+        run: cd /opt/esp/idf && . ./export.sh && cd $GITHUB_WORKSPACE; IDE/Espressif/ESP-IDF/compileAllExamples.sh
   espressif_v5_0:
     name: v5.0 Docker container
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     container:
       image: espressif/idf:release-v5.0
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - name: Initialize Espressif IDE and build examples
-        run: . /opt/esp/idf/export.sh; IDE/Espressif/ESP-IDF/compileAllExamples.sh
+        run: cd /opt/esp/idf && . ./export.sh && cd $GITHUB_WORKSPACE; IDE/Espressif/ESP-IDF/compileAllExamples.sh

.github/workflows/docker-OpenWrt.yml

@@ -2,44 +2,65 @@
 # there aren't any compatibility issues. Take a look at Docker/OpenWrt/README.md
 name: OpenWrt test
 
+# START OF COMMON SECTION
 on:
-    workflow_call:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
 
 jobs:
     build_library:
         name: Compile libwolfssl.so
-        runs-on: ubuntu-latest
+        if: github.repository_owner == 'wolfssl'
+        runs-on: ubuntu-22.04
+        # This should be a safe limit for the tests to run.
+        timeout-minutes: 4
         container:
             image: alpine:latest
         steps:
             - name: Install required tools
               run: apk add argp-standalone asciidoc bash bc binutils bzip2 cdrkit coreutils diffutils elfutils-dev findutils flex musl-fts-dev g++ gawk gcc gettext git grep intltool libxslt linux-headers make musl-libintl musl-obstack-dev ncurses-dev openssl-dev patch perl python3-dev rsync tar unzip util-linux wget zlib-dev autoconf automake libtool
-            - uses: actions/checkout@v3
+            - uses: actions/checkout@v4
             - name: Compile libwolfssl.so
               run: ./autogen.sh && ./configure --enable-all && make
+              # 2024-08-05 - Something broke in the actions. They are no longer following links.
+            - name: tar libwolfssl.so
+              working-directory: src/.libs
+              run: tar -zcf libwolfssl.tgz libwolfssl.so*
             - name: Upload libwolfssl.so
-              uses: actions/upload-artifact@v3
+              uses: actions/upload-artifact@v4
               with:
                 name: openwrt-libwolfssl.so
-                path: src/.libs/libwolfssl.so
-                retention-days: 1
+                path: src/.libs/libwolfssl.tgz
+                retention-days: 5
     compile_container:
         name: Compile container
-        runs-on: ubuntu-latest
+        if: github.repository_owner == 'wolfssl'
+        runs-on: ubuntu-22.04
+        # This should be a safe limit for the tests to run.
+        timeout-minutes: 2
         needs: build_library
         strategy:
             fail-fast: false
             matrix:
-                release: [ "22.03-SNAPSHOT", "21.02-SNAPSHOT" ] # some other versions: 21.02.0 21.02.5 22.03.0 22.03.3 snapshot
+                release: [ "22.03.6", "21.02.7" ] # some other versions: 21.02.0 21.02.5 22.03.0 22.03.3 snapshot
         steps:
-            - uses: actions/checkout@v3
-            - uses: docker/setup-buildx-action@v2
-            - uses: actions/download-artifact@v3
+            - uses: actions/checkout@v4
+            - uses: docker/setup-buildx-action@v3
+            - uses: actions/download-artifact@v4
               with:
                 name: openwrt-libwolfssl.so
-                path: Docker/OpenWrt/.
+                path: .
+            - name: untar libwolfssl.so
+              run: tar -xf libwolfssl.tgz -C Docker/OpenWrt
             - name: Build but dont push
-              uses: docker/build-push-action@v3
+              uses: docker/build-push-action@v5
               with:
                   context: Docker/OpenWrt
                   platforms: linux/amd64

.github/workflows/fil-c.yml

@@ -0,0 +1,47 @@
+name: Fil-C Tests
+
+env:
+  FIL_C_VERSION: v0.674
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  run_fil_c:
+    strategy:
+      fail-fast: false
+      matrix:
+        config: [
+          # Add new configs here. Don't use CPPFLAGS.
+          '',
+          '--enable-all',
+        ]
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 30
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    name: ${{ matrix.config }}
+    steps:
+    - name: Download fil-c release
+      run: gh release download ${{ env.FIL_C_VERSION }} --repo pizlonator/fil-c --pattern 'filc-*'
+      env:
+        GH_TOKEN: ${{ github.token }}
+
+    - name: Extract fil-c tarball
+      run: mkdir -p filc && tar -xf filc-*.tar* --strip-components=1 -C filc
+
+    - name: Build and test wolfSSL
+      uses: wolfSSL/actions-build-autotools-project@v1
+      with:
+        path: wolfssl
+        configure: ${{ matrix.config }} CC=$GITHUB_WORKSPACE/filc/build/bin/filcc --disable-asm CPPFLAGS=-DWC_NO_CACHE_RESISTANT
+        check: true

.github/workflows/gencertbuf.yml

@@ -0,0 +1,41 @@
+name: Test gencertbuf script
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  gencertbuf:
+    name: gencertbuf
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 6
+    steps:
+      - uses: actions/checkout@v4
+        name: Checkout wolfSSL
+
+      - name: Test generate wolfssl/certs_test.h
+        run: ./gencertbuf.pl
+
+      - name: Test wolfSSL
+        run: |
+          ./autogen.sh
+          ./configure --enable-all --enable-experimental --enable-dilithium --enable-kyber
+          make
+          ./wolfcrypt/test/testwolfcrypt
+
+      - name: Print errors
+        if: ${{ failure() }}
+        run: |
+          if [ -f test-suite.log ] ; then
+            cat test-suite.log
+          fi

.github/workflows/grpc.yml

@@ -0,0 +1,113 @@
+name: grpc Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 10
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-all 'CPPFLAGS=-DWOLFSSL_RSA_KEY_CHECK -DHAVE_EX_DATA_CLEANUP_HOOKS'
+          install: true
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-grpc
+          path: build-dir.tgz
+          retention-days: 5
+
+  grpc_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - ref: v1.60.0
+            tests: >-
+              bad_ssl_alpn_test bad_ssl_cert_test client_ssl_test
+              crl_ssl_transport_security_test server_ssl_test
+              ssl_transport_security_test ssl_transport_security_utils_test
+              test_core_security_ssl_credentials_test test_cpp_end2end_ssl_credentials_test
+              h2_ssl_cert_test h2_ssl_session_reuse_test
+    name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 30
+    needs: build_wolfssl
+    steps:
+      - name: Confirm IPv4 and IPv6 support
+        run: |
+          ip addr list lo | grep 'inet '
+          ip addr list lo | grep 'inet6 '
+
+      - name: Install prereqs
+        run:
+          sudo apt-get install build-essential autoconf libtool pkg-config cmake clang libc++-dev
+
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-grpc
+
+      - name: Setup cmake version
+        uses: jwlawson/actions-setup-cmake@v2
+        with:
+          cmake-version: '3.25.x'
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Checkout grpc
+        uses: actions/checkout@v4
+        with:
+          repository: grpc/grpc
+          path: grpc
+          ref: ${{ matrix.ref }}
+
+      - name: Build grpc
+        working-directory: ./grpc
+        run: |
+          patch -p1 < ../osp/grpc/grpc-${{ matrix.ref }}.patch
+          git submodule update --init
+          mkdir cmake/build
+          cd cmake/build
+          cmake -DCMAKE_POLICY_VERSION_MINIMUM=3.1 -DgRPC_BUILD_TESTS=ON -DgRPC_SSL_PROVIDER=wolfssl \
+            -DWOLFSSL_INSTALL_DIR=$GITHUB_WORKSPACE/build-dir ../..
+          make -j $(nproc) ${{ matrix.tests }}
+
+      - name: Run grpc tests
+        working-directory: ./grpc
+        run: |
+          export LD_LIBRARY_PATH=$GITHUB_WORKSPACE/build-dir/lib:$LD_LIBRARY_PATH
+          ./tools/run_tests/start_port_server.py
+          for t in ${{ matrix.tests }} ; do
+            ./cmake/build/$t
+          done

.github/workflows/haproxy.yml

@@ -1,51 +1,98 @@
-name: HaProxy Tests
+name: haproxy Test
 
+# START OF COMMON SECTION
 on:
-  workflow_call:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
 
 jobs:
-  haproxy_check:
-    strategy:
-      fail-fast: false
-      matrix:
-        # List of refs to test
-        ref: [ master ]
-    name: ${{ matrix.ref }}
-    runs-on: ubuntu-latest
+  build_wolfssl:
+    name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
     steps:
       - name: Build wolfSSL
         uses: wolfSSL/actions-build-autotools-project@v1
         with:
           path: wolfssl
-          configure: --enable-quic --enable-haproxy
+          configure: --enable-haproxy
           install: true
 
-      - name: Checkout VTest
-        uses: actions/checkout@v3
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
         with:
-          repository: vtest/VTest
-          path: VTest
+          name: wolf-install-haproxy
+          path: build-dir.tgz
+          retention-days: 5
 
-      - name: Build VTest
-        working-directory: VTest
-        # Special flags due to: https://github.com/vtest/VTest/issues/12
-        run: make FLAGS='-O2 -s -Wall'
+  test_haproxy:
+    name: ${{ matrix.haproxy_ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 15
+    needs: build_wolfssl
+    strategy:
+      fail-fast: false
+      matrix:
+        haproxy_ref: [ 'v3.1.0', 'v3.2.0']
+    steps:
+    - name: Install test dependencies
+      run: |
+        sudo apt-get update
+        sudo apt-get install libpcre2-dev
 
-      - name: Checkout HaProxy
-        uses: actions/checkout@v3
-        with:
-          repository: haproxy/haproxy
-          path: haproxy
-          ref: ${{ matrix.ref }}
+    - name: Download lib
+      uses: actions/download-artifact@v4
+      with:
+        name: wolf-install-haproxy
 
-      - name: Build HaProxy
-        working-directory: haproxy
-        run: >-
-          make -j TARGET=linux-glibc DEBUG='-DDEBUG_MEMORY_POOLS -DDEBUG_STRICT'
-          USE_OPENSSL_WOLFSSL=1 USE_QUIC=1 SSL_INC=$GITHUB_WORKSPACE/build-dir/include/
-          SSL_LIB=$GITHUB_WORKSPACE/build-dir/lib/ ADDLIB=-Wl,-rpath=$GITHUB_WORKSPACE/build-dir/lib
+    - name: untar build-dir
+      run: tar -xf build-dir.tgz
 
-      - name: Test HaProxy
-        working-directory: haproxy
-        run: make reg-tests reg-tests/ssl VTEST_PROGRAM=$GITHUB_WORKSPACE/VTest/vtest
- 
+    # check cache for haproxy if not there then download it
+    - name: Check haproxy cache
+      uses: actions/cache@v4
+      id: cache-haproxy
+      with:
+        path: build-dir/haproxy-${{matrix.haproxy_ref}}
+        key: haproxy-${{matrix.haproxy_ref}}
+
+    - name: Download haproxy if needed
+      if: steps.cache-haproxy.outputs.cache-hit != 'true'
+      uses: actions/checkout@v3
+      with:
+        repository: haproxy/haproxy
+        ref: ${{matrix.haproxy_ref}}
+        path: build-dir/haproxy-${{matrix.haproxy_ref}}
+
+    - name: Build haproxy
+      working-directory: build-dir/haproxy-${{matrix.haproxy_ref}}
+      run: make clean && make TARGET=linux-glibc USE_OPENSSL_WOLFSSL=1 SSL_LIB=$GITHUB_WORKSPACE/build-dir/lib SSL_INC=$GITHUB_WORKSPACE/build-dir/include ADDLIB=-Wl,-rpath,$GITHUB_WORKSPACE/build-dir/lib CFLAGS="-fsanitize=address" LDFLAGS="-fsanitize=address"
+
+      # wlallemand/VTest used in v3.1.0 is no longer available
+    - name: Patch build-vtest.sh for v3.1.0
+      if: matrix.haproxy_ref == 'v3.1.0'
+      working-directory: build-dir/haproxy-${{ matrix.haproxy_ref }}/scripts
+      run: |
+        sed -i 's|https://github.com/wlallemand/VTest/archive/refs/heads/haproxy-sd_notify.tar.gz|https://github.com/vtest/VTest2/archive/main.tar.gz|' build-vtest.sh
+
+    - name: Build haproxy vtest
+      working-directory: build-dir/haproxy-${{matrix.haproxy_ref}}
+      run: ./scripts/build-vtest.sh
+
+    - name: Test haproxy
+      working-directory: build-dir/haproxy-${{matrix.haproxy_ref}}
+      run: VTEST_PROGRAM=$GITHUB_WORKSPACE/build-dir/vtest/vtest make reg-tests -- --debug reg-tests/ssl/*

.github/workflows/hostap-files/configs/07c9f183ea744ac04585fb6dd10220c75a5e2e74/hostapd.config

@@ -0,0 +1,122 @@
+#CC=ccache gcc
+
+CONFIG_DRIVER_NONE=y
+CONFIG_DRIVER_NL80211=y
+CONFIG_RSN_PREAUTH=y
+
+#CONFIG_TLS=internal
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+#CONFIG_TLS=openssl
+CONFIG_TLS=wolfssl
+
+CONFIG_EAP=y
+CONFIG_ERP=y
+CONFIG_EAP_MD5=y
+CONFIG_EAP_TLS=y
+CONFIG_EAP_MSCHAPV2=y
+CONFIG_EAP_PEAP=y
+CONFIG_EAP_GTC=y
+CONFIG_EAP_TTLS=y
+CONFIG_EAP_SIM=y
+CONFIG_EAP_AKA=y
+CONFIG_EAP_AKA_PRIME=y
+CONFIG_EAP_GPSK=y
+CONFIG_EAP_GPSK_SHA256=y
+CONFIG_EAP_SAKE=y
+CONFIG_EAP_PAX=y
+CONFIG_EAP_PSK=y
+CONFIG_EAP_VENDOR_TEST=y
+CONFIG_EAP_FAST=y
+CONFIG_EAP_TEAP=y
+CONFIG_EAP_IKEV2=y
+CONFIG_EAP_TNC=y
+CFLAGS += -DTNC_CONFIG_FILE=\"tnc/tnc_config\"
+LIBS += -rdynamic
+CONFIG_EAP_UNAUTH_TLS=y
+ifeq ($(CONFIG_TLS), openssl)
+CONFIG_EAP_PWD=y
+endif
+ifeq ($(CONFIG_TLS), wolfssl)
+CONFIG_EAP_PWD=y
+endif
+CONFIG_EAP_EKE=y
+CONFIG_PKCS12=y
+CONFIG_RADIUS_SERVER=y
+CONFIG_IPV6=y
+CONFIG_TLSV11=y
+CONFIG_TLSV12=y
+
+CONFIG_FULL_DYNAMIC_VLAN=y
+CONFIG_VLAN_NETLINK=y
+CONFIG_LIBNL32=y
+CONFIG_LIBNL3_ROUTE=y
+CONFIG_IEEE80211R=y
+CONFIG_IEEE80211AC=y
+CONFIG_IEEE80211AX=y
+
+CONFIG_OCV=y
+
+CONFIG_WPS=y
+CONFIG_WPS_UPNP=y
+CONFIG_WPS_NFC=y
+#CONFIG_WPS_STRICT=y
+CONFIG_WPA_TRACE=y
+CONFIG_WPA_TRACE_BFD=y
+
+CONFIG_P2P_MANAGER=y
+CONFIG_DEBUG_FILE=y
+CONFIG_DEBUG_LINUX_TRACING=y
+CONFIG_WPA_CLI_EDIT=y
+CONFIG_ACS=y
+CONFIG_NO_RANDOM_POOL=y
+CONFIG_WNM=y
+CONFIG_INTERWORKING=y
+CONFIG_HS20=y
+CONFIG_SQLITE=y
+CONFIG_SAE=y
+CONFIG_SAE_PK=y
+CFLAGS += -DALL_DH_GROUPS
+
+CONFIG_FST=y
+CONFIG_FST_TEST=y
+
+CONFIG_TESTING_OPTIONS=y
+CFLAGS += -DCONFIG_RADIUS_TEST
+CONFIG_MODULE_TESTS=y
+
+CONFIG_SUITEB=y
+CONFIG_SUITEB192=y
+
+# AddressSanitizer (ASan) can be enabled by uncommenting the following lines.
+# This can be used as a more efficient memory error detector than valgrind
+# (though, with still some CPU and memory cost, so VM cases will need more
+# memory allocated for the guest).
+#CFLAGS += -fsanitize=address -O1 -fno-omit-frame-pointer -g
+#LIBS += -fsanitize=address -fno-omit-frame-pointer -g
+#LIBS_h += -fsanitize=address -fno-omit-frame-pointer -g
+#LIBS_n += -fsanitize=address -fno-omit-frame-pointer -g
+#LIBS_c += -fsanitize=address -fno-omit-frame-pointer -g
+
+# Undefined Behavior Sanitizer (UBSan) can be enabled by uncommenting the
+# following lines.
+#CFLAGS += -Wno-format-nonliteral
+#CFLAGS += -fsanitize=undefined
+##CFLAGS += -fno-sanitize-recover
+#LIBS += -fsanitize=undefined
+##LIBS += -fno-sanitize-recover
+#LIBS_h += -fsanitize=undefined
+#LIBS_n += -fsanitize=undefined
+#LIBS_c += -fsanitize=undefined
+CONFIG_MBO=y
+
+CONFIG_TAXONOMY=y
+CONFIG_FILS=y
+CONFIG_FILS_SK_PFS=y
+CONFIG_OWE=y
+CONFIG_DPP=y
+CONFIG_DPP2=y
+CONFIG_WEP=y
+CONFIG_PASN=y
+CONFIG_AIRTIME_POLICY=y
+CONFIG_IEEE80211BE=y

.github/workflows/hostap-files/configs/07c9f183ea744ac04585fb6dd10220c75a5e2e74/wpa_supplicant.config

@@ -0,0 +1,164 @@
+#CC=ccache gcc
+
+#CONFIG_TLS=openssl
+CONFIG_TLS=wolfssl
+#CONFIG_TLS=internal
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+CONFIG_IEEE8021X_EAPOL=y
+
+CONFIG_ERP=y
+CONFIG_EAP_MD5=y
+CONFIG_MSCHAPV2=y
+CONFIG_EAP_TLS=y
+CONFIG_EAP_PEAP=y
+CONFIG_EAP_TTLS=y
+CONFIG_EAP_GTC=y
+CONFIG_EAP_OTP=y
+CONFIG_EAP_PSK=y
+CONFIG_EAP_PAX=y
+CONFIG_EAP_LEAP=y
+CONFIG_EAP_SIM=y
+CONFIG_EAP_AKA=y
+CONFIG_EAP_AKA_PRIME=y
+CONFIG_EAP_VENDOR_TEST=y
+CONFIG_EAP_TLV=y
+CONFIG_EAP_SAKE=y
+CONFIG_EAP_GPSK=y
+CONFIG_EAP_GPSK_SHA256=y
+CONFIG_EAP_EKE=y
+CONFIG_EAP_TNC=y
+CFLAGS += -DTNC_CONFIG_FILE=\"tnc/tnc_config\"
+LIBS += -rdynamic
+CONFIG_EAP_FAST=y
+CONFIG_EAP_TEAP=y
+CONFIG_EAP_IKEV2=y
+
+ifeq ($(CONFIG_TLS), openssl)
+CONFIG_EAP_PWD=y
+endif
+ifeq ($(CONFIG_TLS), wolfssl)
+CONFIG_EAP_PWD=y
+endif
+
+CONFIG_USIM_SIMULATOR=y
+CONFIG_SIM_SIMULATOR=y
+
+#CONFIG_PCSC=y
+CONFIG_IPV6=y
+CONFIG_DRIVER_NONE=y
+CONFIG_PKCS12=y
+CONFIG_CTRL_IFACE=unix
+
+CONFIG_WPA_CLI_EDIT=y
+
+CONFIG_OCSP=y
+
+#CONFIG_ELOOP_POLL=y
+
+CONFIG_CTRL_IFACE_DBUS_NEW=y
+CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+CONFIG_IEEE80211R=y
+CONFIG_IEEE80211AC=y
+CONFIG_IEEE80211AX=y
+
+CONFIG_OCV=y
+
+CONFIG_DEBUG_FILE=y
+
+CONFIG_WPS=y
+#CONFIG_WPS_STRICT=y
+CONFIG_WPS_UPNP=y
+CONFIG_WPS_NFC=y
+CONFIG_WPS_ER=y
+#CONFIG_WPS_REG_DISABLE_OPEN=y
+
+CONFIG_DRIVER_WEXT=y
+
+CONFIG_DRIVER_NL80211=y
+CFLAGS += -I/usr/include/libnl3
+CONFIG_LIBNL32=y
+
+CONFIG_IBSS_RSN=y
+
+CONFIG_AP=y
+CONFIG_MESH=y
+CONFIG_P2P=y
+CONFIG_WIFI_DISPLAY=y
+
+CONFIG_ACS=y
+
+CONFIG_BGSCAN_SIMPLE=y
+CONFIG_BGSCAN_LEARN=y
+
+CONFIG_WPA_TRACE=y
+CONFIG_WPA_TRACE_BFD=y
+
+CONFIG_TDLS=y
+CONFIG_TDLS_TESTING=y
+CONFIG_NO_RANDOM_POOL=y
+
+CONFIG_TLSV11=y
+CONFIG_TLSV12=y
+
+CONFIG_HT_OVERRIDES=y
+CONFIG_VHT_OVERRIDES=y
+CONFIG_HE_OVERRIDES=y
+
+CONFIG_DEBUG_LINUX_TRACING=y
+
+CONFIG_INTERWORKING=y
+CONFIG_HS20=y
+
+CONFIG_AUTOSCAN_EXPONENTIAL=y
+CONFIG_AUTOSCAN_PERIODIC=y
+
+CONFIG_EXT_PASSWORD_TEST=y
+CONFIG_EXT_PASSWORD_FILE=y
+
+CONFIG_EAP_UNAUTH_TLS=y
+
+CONFIG_SAE=y
+CONFIG_SAE_PK=y
+CFLAGS += -DALL_DH_GROUPS
+
+CONFIG_WNM=y
+
+CONFIG_FST=y
+CONFIG_FST_TEST=y
+
+CONFIG_TESTING_OPTIONS=y
+CONFIG_MODULE_TESTS=y
+
+CONFIG_SUITEB=y
+CONFIG_SUITEB192=y
+
+# AddressSanitizer (ASan) can be enabled by uncommenting the following lines.
+# This can be used as a more efficient memory error detector than valgrind
+# (though, with still some CPU and memory cost, so VM cases will need more
+# memory allocated for the guest).
+#CFLAGS += -fsanitize=address -O1 -fno-omit-frame-pointer -g
+#LIBS += -fsanitize=address -fno-omit-frame-pointer -g
+#LIBS_c += -fsanitize=address -fno-omit-frame-pointer -g
+#LIBS_p += -fsanitize=address -fno-omit-frame-pointer -g
+
+# Undefined Behavior Sanitizer (UBSan) can be enabled by uncommenting the
+# following lines.
+#CFLAGS += -Wno-format-nonliteral
+#CFLAGS += -fsanitize=undefined
+##CFLAGS += -fno-sanitize-recover
+#LIBS += -fsanitize=undefined
+##LIBS += -fno-sanitize-recover
+#LIBS_c += -fsanitize=undefined
+#LIBS_p += -fsanitize=undefined
+CONFIG_MBO=y
+CONFIG_FILS=y
+CONFIG_FILS_SK_PFS=y
+CONFIG_PMKSA_CACHE_EXTERNAL=y
+CONFIG_OWE=y
+CONFIG_DPP=y
+CONFIG_DPP2=y
+CONFIG_WEP=y
+CONFIG_PASN=y

.github/workflows/hostap-files/configs/b607d2723e927a3446d89aed813f1aa6068186bb/tests

@@ -191,13 +191,7 @@ ap_wpa2_psk_supp_proto_no_gtk_in_group_msg
 ap_wpa2_psk_supp_proto_too_long_gtk_in_group_msg
 ap_wpa2_psk_supp_proto_too_long_gtk_kde
 ap_wpa2_psk_supp_proto_gtk_not_encrypted
-ap_wpa2_psk_supp_proto_no_igtk
-ap_wpa2_psk_supp_proto_igtk_ok
-ap_wpa2_psk_supp_proto_igtk_keyid_swap
-ap_wpa2_psk_supp_proto_igtk_keyid_too_large
-ap_wpa2_psk_supp_proto_igtk_keyid_unexpected
 ap_wpa2_psk_wep
-ap_wpa2_psk_ifdown
 ap_wpa2_psk_drop_first_msg_4
 ap_wpa2_psk_disable_enable
 ap_wpa2_psk_incorrect_passphrase
@@ -210,10 +204,7 @@ ap_wpa2_disable_eapol_retry
 ap_wpa2_disable_eapol_retry_group
 ap_wpa2_psk_mic_0
 ap_wpa2_psk_local_error
-ap_wpa2_psk_inject_assoc
-ap_wpa2_psk_no_control_port
 ap_wpa2_psk_ap_control_port
-ap_wpa2_psk_ap_control_port_disabled
 ap_wpa2_psk_rsne_mismatch_ap
 ap_wpa2_psk_rsne_mismatch_ap2
 ap_wpa2_psk_rsne_mismatch_ap3
@@ -253,10 +244,8 @@ ap_wpa2_eap_aka_sql
 ap_wpa2_eap_aka_config
 ap_wpa2_eap_aka_ext
 ap_wpa2_eap_aka_ext_auth_fail
-ap_wpa2_eap_aka_prime
 ap_wpa2_eap_aka_prime_imsi_identity
 ap_wpa2_eap_aka_prime_imsi_privacy_key
-ap_wpa2_eap_aka_prime_sql
 ap_wpa2_eap_aka_prime_ext_auth_fail
 ap_wpa2_eap_aka_prime_ext
 ap_wpa2_eap_ttls_pap
@@ -416,19 +405,6 @@ ap_wpa2_radius_server_get_id
 ap_wpa2_eap_tls_tod
 ap_wpa2_eap_tls_tod_tofu
 ap_wpa2_eap_sake_no_control_port
-ap_wpa2_tdls
-ap_wpa2_tdls_concurrent_init
-ap_wpa2_tdls_concurrent_init2
-ap_wpa2_tdls_decline_resp
-ap_wpa2_tdls_long_lifetime
-ap_wpa2_tdls_long_frame
-ap_wpa2_tdls_reneg
-ap_wpa2_tdls_wrong_lifetime_resp
-ap_wpa2_tdls_diff_rsnie
-ap_wpa2_tdls_wrong_tpk_m2_mic
-ap_wpa2_tdls_wrong_tpk_m3_mic
-ap_wpa2_tdls_double_tpk_m2
-ap_wpa2_tdls_responder_teardown
 dpp_network_intro_version
 dpp_network_intro_version_change
 dpp_network_intro_version_missing_req
@@ -459,12 +435,9 @@ dpp_qr_code_curves
 dpp_qr_code_curves_brainpool
 dpp_qr_code_unsupported_curve
 dpp_qr_code_keygen_fail
-dpp_qr_code_curve_select
 dpp_qr_code_auth_broadcast
-dpp_configurator_enrollee
 dpp_configurator_enrollee_prime256v1
 dpp_configurator_enrollee_secp384r1
-dpp_configurator_enrollee_secp521r1
 dpp_configurator_enrollee_brainpoolP256r1
 dpp_configurator_enrollee_brainpoolP384r1
 dpp_configurator_enrollee_brainpoolP512r1
@@ -477,7 +450,6 @@ dpp_qr_code_curve_brainpoolP384r1
 dpp_qr_code_curve_brainpoolP512r1
 dpp_qr_code_set_key
 dpp_qr_code_auth_mutual
-dpp_qr_code_auth_mutual2
 dpp_qr_code_auth_mutual_p_256
 dpp_qr_code_auth_mutual_p_384
 dpp_qr_code_auth_mutual_p_521
@@ -514,13 +486,11 @@ dpp_config_no_signed_connector
 dpp_config_unexpected_signed_connector_char
 dpp_config_root_not_an_object
 dpp_config_no_wi_fi_tech
-dpp_config_unsupported_wi_fi_tech
 dpp_config_no_discovery
 dpp_config_no_discovery_ssid
 dpp_config_too_long_discovery_ssid
 dpp_config_no_cred
 dpp_config_no_cred_akm
-dpp_config_unsupported_cred_akm
 dpp_config_error_legacy_no_pass
 dpp_config_error_legacy_too_long_pass
 dpp_config_error_legacy_psk_with_sae
@@ -531,13 +501,10 @@ dpp_config_connector_error_ext_sign
 dpp_config_connector_error_too_short_timestamp
 dpp_config_connector_error_invalid_timestamp
 dpp_config_connector_error_invalid_timestamp_date
-dpp_config_connector_error_invalid_time_zone
-dpp_config_connector_error_invalid_time_zone_2
 dpp_config_connector_error_expired_1
 dpp_config_connector_error_expired_2
 dpp_config_connector_error_expired_3
 dpp_config_connector_error_expired_4
-dpp_config_connector_error_expired_5
 dpp_config_connector_error_expired_6
 dpp_config_connector_error_no_groups
 dpp_config_connector_error_empty_groups
@@ -565,13 +532,6 @@ dpp_ap_config_p256_bp256
 dpp_ap_config_bp256_p256
 dpp_ap_config_p521_bp512
 dpp_ap_config_reconfig_configurator
-dpp_auto_connect_1
-dpp_auto_connect_2
-dpp_auto_connect_2_connect_cmd
-dpp_auto_connect_2_sta_ver1
-dpp_auto_connect_2_ap_ver1
-dpp_auto_connect_2_ver1
-dpp_auto_connect_2_conf_ver1
 dpp_auto_connect_legacy
 dpp_auto_connect_legacy_ssid_charset
 dpp_auto_connect_legacy_sae_1
@@ -580,13 +540,6 @@ dpp_auto_connect_legacy_psk_sae_1
 dpp_auto_connect_legacy_psk_sae_2
 dpp_auto_connect_legacy_psk_sae_3
 dpp_auto_connect_legacy_pmf_required
-dpp_qr_code_auth_responder_configurator
-dpp_qr_code_auth_responder_configurator_group_id
-dpp_qr_code_auth_enrollee_init_netrole
-dpp_qr_code_hostapd_init
-dpp_qr_code_hostapd_init_offchannel
-dpp_qr_code_hostapd_init_offchannel_neg_freq
-dpp_qr_code_hostapd_ignore_mismatch
 dpp_test_vector_p_256
 dpp_test_vector_p_256_b
 dpp_test_vector_p_521
@@ -603,7 +556,6 @@ dpp_pkex_no_identifier
 dpp_pkex_identifier_mismatch
 dpp_pkex_identifier_mismatch2
 dpp_pkex_identifier_mismatch3
-dpp_pkex_5ghz
 dpp_pkex_test_vector
 dpp_pkex_code_mismatch
 dpp_pkex_code_mismatch_limit
@@ -625,7 +577,6 @@ dpp_pkex_hostapd_errors
 dpp_pkex_nak_curve_change
 dpp_pkex_nak_curve_change2
 dpp_hostapd_configurator
-dpp_hostapd_configurator_enrollee_v1
 dpp_hostapd_configurator_responder
 dpp_hostapd_configurator_fragmentation
 dpp_hostapd_enrollee_fragmentation
@@ -650,7 +601,6 @@ dpp_proto_stop_at_pkex_cr_req
 dpp_proto_stop_at_pkex_cr_resp
 dpp_proto_network_introduction
 dpp_hostapd_auth_conf_timeout
-dpp_hostapd_auth_resp_retries
 dpp_tcp
 dpp_tcp_port
 dpp_tcp_mutual
@@ -702,6 +652,5 @@ dpp_qr_code_config_event_initiator_failure
 dpp_qr_code_config_event_initiator_no_response
 dpp_qr_code_config_event_initiator_both
 dpp_tcp_qr_code_config_event_initiator
-dpp_qr_code_config_event_responder
 dpp_discard_public_action
 

.github/workflows/hostap-files/configs/hostap_2_10/extra.patch

@@ -0,0 +1,47 @@
+From a53a6a67dc121b45d611318e2a37815cc209839c Mon Sep 17 00:00:00 2001
+From: Juliusz Sosinowicz <juliusz@wolfssl.com>
+Date: Fri, 19 Apr 2024 16:41:38 +0200
+Subject: [PATCH] Fixes for running tests under UML
+
+- Apply commit ID fix from more recent commit
+- priv_sz and pub_sz are checked and fail on UML. Probably because stack is zeroed out.
+---
+ src/crypto/crypto_wolfssl.c | 2 +-
+ tests/hwsim/run-all.sh      | 8 +++++++-
+ 2 files changed, 8 insertions(+), 2 deletions(-)
+
+diff --git a/src/crypto/crypto_wolfssl.c b/src/crypto/crypto_wolfssl.c
+index 00ecf61352..a57fa50697 100644
+--- a/src/crypto/crypto_wolfssl.c
++++ b/src/crypto/crypto_wolfssl.c
+@@ -785,7 +785,7 @@ int crypto_dh_init(u8 generator, const u8 *prime, size_t prime_len, u8 *privkey,
+ 	int ret = -1;
+ 	WC_RNG rng;
+ 	DhKey *dh = NULL;
+-	word32 priv_sz, pub_sz;
++	word32 priv_sz = prime_len, pub_sz = prime_len;
+ 
+ 	if (TEST_FAIL())
+ 		return -1;
+diff --git a/tests/hwsim/run-all.sh b/tests/hwsim/run-all.sh
+index ee48cd0581..75c3a58b52 100755
+--- a/tests/hwsim/run-all.sh
++++ b/tests/hwsim/run-all.sh
+@@ -15,7 +15,13 @@ export LOGDIR
+ if [ -z "$DBFILE" ]; then
+     DB=""
+ else
+-    DB="-S $DBFILE --commit $(git rev-parse HEAD)"
++    DB="-S $DBFILE"
++    if [ -z "$COMMITID" ]; then
++	COMMITID="$(git rev-parse HEAD)"
++    fi
++    if [ -n "$COMMITID" ]; then
++	DB="$DB --commit $COMMITID"
++    fi
+     if [ -n "$BUILD" ]; then
+ 	DB="$DB -b $BUILD"
+     fi
+-- 
+2.34.1
+

.github/workflows/hostap-files/configs/hostap_2_10/tests

@@ -163,7 +163,6 @@ ap_wpa2_disable_eapol_retry_group
 ap_wpa2_psk_mic_0
 ap_wpa2_psk_local_error
 ap_wpa2_psk_inject_assoc
-ap_wpa2_psk_no_control_port
 ap_wpa2_psk_ap_control_port
 ap_wpa2_psk_ap_control_port_disabled
 ap_wpa2_psk_rsne_mismatch_ap
@@ -269,16 +268,3 @@ ap_wpa2_eap_psk_mac_addr_change
 ap_wpa2_eap_server_get_id
 ap_wpa2_radius_server_get_id
 ap_wpa2_eap_sake_no_control_port
-ap_wpa2_tdls
-ap_wpa2_tdls_concurrent_init
-ap_wpa2_tdls_concurrent_init2
-ap_wpa2_tdls_decline_resp
-ap_wpa2_tdls_long_lifetime
-ap_wpa2_tdls_long_frame
-ap_wpa2_tdls_reneg
-ap_wpa2_tdls_wrong_lifetime_resp
-ap_wpa2_tdls_diff_rsnie
-ap_wpa2_tdls_wrong_tpk_m2_mic
-ap_wpa2_tdls_wrong_tpk_m3_mic
-ap_wpa2_tdls_double_tpk_m2
-ap_wpa2_tdls_responder_teardown

.github/workflows/hostap-vm.yml

@@ -0,0 +1,349 @@
+name: hostap and wpa-supplicant Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+env:
+  LINUX_REF: v6.12
+
+jobs:
+  build_wolfssl:
+    strategy:
+      matrix:
+        include:
+          - build_id: hostap-vm-build1
+            wolf_extra_config: --disable-tls13
+          - build_id: hostap-vm-build2
+            wolf_extra_config: >-
+              --enable-wpas-dpp --enable-brainpool --with-eccminsz=192
+              --enable-tlsv10 --enable-oldtls
+    name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 10
+    steps:
+        # No way to view the full strategy in the browser (really weird)
+      - name: Print strategy
+        run: |
+          cat <<EOF
+          ${{ toJSON(matrix) }}
+          EOF
+
+      - if: ${{ runner.debug }}
+        name: Enable wolfSSL debug logging
+        run: |
+          echo "wolf_debug_flags=--enable-debug" >> $GITHUB_ENV
+
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: >-
+            --enable-wpas CPPFLAGS=-DWOLFSSL_STATIC_RSA
+            ${{ env.wolf_debug_flags }} ${{ matrix.wolf_extra_config }}
+          install: true
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: ${{ matrix.build_id }}
+          path: build-dir.tgz
+          retention-days: 5
+
+  checkout_hostap:
+    name: Checkout hostap repo
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 10
+    steps:
+      - name: Checking if we have hostap in cache
+        uses: actions/cache@v4
+        id: cache
+        with:
+          path: hostap
+          key: hostap-repo
+          lookup-only: true
+
+      - name: Checkout hostap
+        if: steps.cache.outputs.cache-hit != 'true'
+        run: git clone git://w1.fi/hostap.git hostap
+
+  build_uml_linux:
+    name: Build UML (UserMode Linux)
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 10
+    needs: checkout_hostap
+    steps:
+      - name: Checking if we have kernel in cache
+        uses: actions/cache@v4
+        id: cache
+        with:
+          path: linux/linux
+          key: hostap-linux-${{ env.LINUX_REF }}
+          lookup-only: true
+
+      - name: Checking if we have hostap in cache
+        if: steps.cache.outputs.cache-hit != 'true'
+        uses: actions/cache/restore@v4
+        with:
+          path: hostap
+          key: hostap-repo
+          fail-on-cache-miss: true
+
+      - name: Checkout linux
+        if: steps.cache.outputs.cache-hit != 'true'
+        uses: actions/checkout@v4
+        with:
+          repository: torvalds/linux
+          path: linux
+          ref: ${{ env.LINUX_REF }}
+
+      - name: Compile linux
+        if: steps.cache.outputs.cache-hit != 'true'
+        run: |
+          cp hostap/tests/hwsim/vm/kernel-config.uml linux/.config
+          cd linux
+          yes "" | ARCH=um make -j $(nproc)
+
+  hostap_test:
+    strategy:
+      fail-fast: false
+      matrix:
+        # should hostapd be compiled with wolfssl
+        hostapd: [true, false]
+        # should wpa_supplicant be compiled with wolfssl
+        wpa_supplicant: [true, false]
+        # Fix the versions of hostap and osp to not break testing when a new
+        # patch is added in to osp. Tests are read from the corresponding
+        # configs/hostap_ref/tests file.
+        config: [
+          {
+            hostap_ref: hostap_2_10,
+            remove_teap: true,
+            # TLS 1.3 does not work for this version
+            build_id: hostap-vm-build1,
+          },
+          # Test the dpp patch
+          {
+            hostap_ref: b607d2723e927a3446d89aed813f1aa6068186bb,
+            osp_ref: ad5b52a49b3cc2a5bfb47ccc1d6a5137132e9446,
+            build_id: hostap-vm-build2
+          },
+          {
+            hostap_ref: 07c9f183ea744ac04585fb6dd10220c75a5e2e74,
+            osp_ref: e1876fbbf298ee442bc7ab8561331ebc7de17528,
+            build_id: hostap-vm-build2
+          },
+        ]
+        exclude:
+          # don't test openssl on both sides
+          - hostapd: false
+            wpa_supplicant: false
+          # no hostapd support for dpp yet
+          - hostapd: true
+            config: {
+              hostap_ref: b607d2723e927a3446d89aed813f1aa6068186bb,
+              osp_ref: ad5b52a49b3cc2a5bfb47ccc1d6a5137132e9446,
+              build_id: hostap-vm-build2
+            }
+    name: hwsim test
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 45
+    needs: [build_wolfssl, build_uml_linux, checkout_hostap]
+    steps:
+      - name: Checking if we have kernel in cache
+        uses: actions/cache/restore@v4
+        id: cache
+        with:
+          path: linux/linux
+          key: hostap-linux-${{ env.LINUX_REF }}
+          fail-on-cache-miss: true
+
+        # No way to view the full strategy in the browser (really weird)
+      - name: Print strategy
+        run: |
+          cat <<EOF
+          ${{ toJSON(matrix) }}
+          EOF
+
+      - name: Print computed job run ID
+        run: |
+          SHA_SUM=$(sha256sum << 'END_OF_HEREDOC' | cut -d " " -f 1
+          ${{ toJSON(github) }}
+          END_OF_HEREDOC
+          )
+          echo "our_job_run_id=$SHA_SUM" >> $GITHUB_ENV
+          echo Our job run ID is $SHA_SUM
+
+      - name: Checkout wolfSSL
+        uses: actions/checkout@v4
+        with:
+          path: wolfssl
+
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: ${{ matrix.config.build_id }}
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Install dependencies
+        run: |
+          # Don't prompt for anything
+          export DEBIAN_FRONTEND=noninteractive
+          sudo apt-get update
+          # hostap dependencies
+          sudo apt-get install -y libpcap0.8 libpcap-dev curl libcurl4-openssl-dev \
+            libnl-3-dev binutils-dev libssl-dev libiberty-dev libnl-genl-3-dev \
+            libnl-route-3-dev libdbus-1-dev bridge-utils tshark python3-pycryptodome
+          sudo pip install pycryptodome
+
+      - name: Checking if we have hostap in cache
+        uses: actions/cache/restore@v4
+        with:
+          path: hostap
+          key: hostap-repo
+          fail-on-cache-miss: true
+
+      - name: Checkout correct ref
+        working-directory: hostap
+        run: git checkout ${{ matrix.config.hostap_ref }}
+
+      - name: Update certs
+        working-directory: hostap/tests/hwsim/auth_serv
+        run: |
+          ./update.sh
+          # Force regeneration of rsa3072-ca.key to get rsa3072-generate.sh to
+          # correctly update all the certs
+          rm rsa3072-ca.key
+          ./rsa3072-generate.sh
+
+      - if: ${{ matrix.config.osp_ref }}
+        name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+          ref: ${{ matrix.config.osp_ref }}
+
+      - if: ${{ matrix.config.osp_ref }}
+        name: Apply patch files
+        working-directory: hostap
+        run: |
+          for f in $GITHUB_WORKSPACE/osp/hostap-patches/pending/*
+          do
+            patch -p1 < $f
+          done
+
+      - name: Apply extra patches
+        working-directory: hostap
+        run: |
+          FILE=$GITHUB_WORKSPACE/wolfssl/.github/workflows/hostap-files/configs/${{ matrix.config.hostap_ref }}/extra.patch
+          if [ -f "$FILE" ]; then
+            patch -p1 < $FILE
+          fi
+
+      - if: ${{ matrix.hostapd }}
+        name: Setup hostapd config file
+        run: |
+          cp wolfssl/.github/workflows/hostap-files/configs/${{ matrix.config.hostap_ref }}/hostapd.config \
+             hostap/hostapd/.config
+          cat <<EOF >> hostap/hostapd/.config
+            CFLAGS += -I$GITHUB_WORKSPACE/build-dir/include -Wl,-rpath=$GITHUB_WORKSPACE/build-dir/lib
+            LIBS += -L$GITHUB_WORKSPACE/build-dir/lib -Wl,-rpath=$GITHUB_WORKSPACE/build-dir/lib
+          EOF
+
+      - if: ${{ matrix.wpa_supplicant }}
+        name: Setup wpa_supplicant config file
+        run: |
+          cp wolfssl/.github/workflows/hostap-files/configs/${{ matrix.config.hostap_ref }}/wpa_supplicant.config \
+             hostap/wpa_supplicant/.config
+          cat <<EOF >> hostap/wpa_supplicant/.config
+            CFLAGS += -I$GITHUB_WORKSPACE/build-dir/include -Wl,-rpath=$GITHUB_WORKSPACE/build-dir/lib
+            LIBS += -L$GITHUB_WORKSPACE/build-dir/lib -Wl,-rpath=$GITHUB_WORKSPACE/build-dir/lib
+          EOF
+
+      - name: Build hostap and wpa_supplicant
+        working-directory: hostap/tests/hwsim/
+        run: ./build.sh
+
+      - if: ${{ matrix.hostapd }}
+        name: Confirm hostapd linking with wolfSSL
+        run: ldd hostap/hostapd/hostapd | grep wolfssl
+
+      - if: ${{ matrix.wpa_supplicant }}
+        name: Confirm wpa_supplicant linking with wolfSSL
+        run: ldd hostap/wpa_supplicant/wpa_supplicant | grep wolfssl
+
+      - if: ${{ matrix.config.remove_teap }}
+        name: Remove EAP-TEAP from test configuration
+        working-directory: hostap/tests/hwsim/auth_serv
+        run: |
+          sed -e 's/"erp-teap@example.com"\tTEAP//' -i eap_user.conf
+          sed -e 's/"erp-teap@example.com"\tMSCHAPV2\t"password"\t\[2\]//' -i eap_user.conf
+          sed -e 's/"TEAP"\t\tTEAP//' -i eap_user.conf
+          sed -e 's/TEAP,//' -i eap_user.conf
+
+      - if: ${{ runner.debug }}
+        name: Enable hostap debug logging
+        run: |
+          echo "hostap_debug_flags=--debug" >> $GITHUB_ENV
+
+      - name: Run tests
+        id: testing
+        working-directory: hostap/tests/hwsim/
+        run: |
+          cat <<EOF >> vm/vm-config
+            KERNELDIR=$GITHUB_WORKSPACE/linux
+            KVMARGS="-cpu host"
+          EOF
+          git config --global --add safe.directory $GITHUB_WORKSPACE/hostap
+          # Run tests in increments of 200 to not stall out the parallel-vm script
+          while mapfile -t -n 200 ary && ((${#ary[@]})); do
+            TESTS=$(printf '%s\n' "${ary[@]}" | tr '\n' ' ')
+            HWSIM_RES=0 # Not set when command succeeds
+            ./vm/parallel-vm.py ${{ env.hostap_debug_flags }} --nocurses $(nproc) $TESTS  || HWSIM_RES=$?
+            if [ "$HWSIM_RES" -ne "0" ]; then
+              # Let's re-run the failing tests. We gather the failed tests from the log file.
+              FAILED_TESTS=$(grep 'failed tests' /tmp/hwsim-test-logs/*-parallel.log | sed 's/failed tests: //' | tr ' ' '\n' | sort | uniq | tr '\n' ' ')
+              printf 'failed tests: %s\n' "$FAILED_TESTS"
+              ./vm/parallel-vm.py ${{ env.hostap_debug_flags }} --nocurses $(nproc) $FAILED_TESTS
+            fi
+            rm -r /tmp/hwsim-test-logs
+          done < $GITHUB_WORKSPACE/wolfssl/.github/workflows/hostap-files/configs/${{ matrix.config.hostap_ref }}/tests
+
+      # The logs are quite big. It hasn't been useful so far so let's not waste
+      # precious gh space.
+      #- name: zip logs
+      #  if: ${{ failure() && steps.testing.outcome == 'failure' }}
+      #  working-directory: hostap/tests/hwsim/
+      #  run: |
+      #    rm /tmp/hwsim-test-logs/latest
+      #    zip -9 -r logs.zip /tmp/hwsim-test-logs
+      #
+      #- name: Upload failure logs
+      #  if: ${{ failure() && steps.testing.outcome == 'failure' }}
+      #  uses: actions/upload-artifact@v4
+      #  with:
+      #    name: hostap-logs-${{ env.our_job_run_id }}
+      #    path: hostap/tests/hwsim/logs.zip
+      #    retention-days: 5

.github/workflows/intelasm-c-fallback.yml

@@ -0,0 +1,52 @@
+name: Dynamic C Fallback Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  make_check:
+    strategy:
+      matrix:
+        config: [
+          # Add new configs here
+          '--enable-intelasm --enable-sp-asm --enable-all --enable-testcert --enable-acert --enable-dtls13 --enable-dtls-mtu --enable-dtls-frag-ch --enable-dtlscid --enable-quic --with-sys-crypto-policy CPPFLAGS="-DNO_WOLFSSL_CIPHER_SUITE_TEST -DWC_C_DYNAMIC_FALLBACK -DDEBUG_VECTOR_REGISTER_ACCESS -DDEBUG_VECTOR_REGISTER_ACCESS_FUZZING -DWC_DEBUG_CIPHER_LIFECYCLE"'
+        ]
+    name: make check
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 6
+    steps:
+      - uses: actions/checkout@v4
+        name: Checkout wolfSSL
+
+      - name: Test wolfSSL with WC_C_DYNAMIC_FALLBACK and DEBUG_VECTOR_REGISTER_ACCESS_FUZZING
+        run: |
+          ./autogen.sh
+          randseed=$(head -c 4 /dev/urandom | od -t u4 --address-radix=n)
+          randseed="${randseed#"${randseed%%[![:space:]]*}"}"
+          echo "fuzzing seed=${randseed}"
+          ./configure ${{ matrix.config }} CFLAGS="-DWC_DEBUG_VECTOR_REGISTERS_FUZZING_SEED=$randseed -fsanitize=leak -g -fno-omit-frame-pointer"
+          make -j 4
+          make check
+
+      - name: Print errors
+        if: ${{ failure() }}
+        run: |
+          for file in scripts/*.log
+          do
+              if [ -f "$file" ]; then
+                  echo "${file}:"
+                  cat "$file"
+                  echo "========================================================================"
+              fi
+          done

.github/workflows/ipmitool.yml

@@ -0,0 +1,85 @@
+name: ipmitool Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-all
+          install: true
+          # Don't run tests as this config is tested in many other places
+          check: false
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-ipmitool
+          path: build-dir.tgz
+          retention-days: 5
+
+  build_ipmitool:
+    strategy:
+      fail-fast: false
+      matrix:
+        git_ref: [ c3939dac2c060651361fc71516806f9ab8c38901 ]
+    name: ${{ matrix.git_ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    needs: build_wolfssl
+    steps:
+      - name: Install dependencies
+        run: export DEBIAN_FRONTEND=noninteractive && sudo apt-get update && sudo apt-get install -y libreadline8
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-ipmitool
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Build ipmitool
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          repository: ipmitool/ipmitool
+          ref: ${{ matrix.git_ref }}
+          path: ipmitool
+          patch-file: $GITHUB_WORKSPACE/osp/ipmitool/*-${{ matrix.git_ref }}.patch
+          configure: --with-wolfssl=$GITHUB_WORKSPACE/build-dir
+          # No checks included and not running since it depends on hardware
+          check: false
+
+      - name: Confirm built with wolfSSL
+        working-directory: ipmitool
+        run: |
+          ldd src/ipmitool | grep wolfssl
+          ldd src/ipmievd | grep wolfssl

.github/workflows/jwt-cpp.yml

@@ -0,0 +1,101 @@
+name: jwt-cpp Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    # Just to keep it the same as the testing target
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-all
+          install: true
+          # Don't run tests as this config is tested in many other places
+          check: false
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-jwt-cpp
+          path: build-dir.tgz
+          retention-days: 5
+
+  build_pam-ipmi:
+    if: github.repository_owner == 'wolfssl'
+    strategy:
+      fail-fast: false
+      matrix:
+        config:
+          - ref: 0.7.0
+            runner: ubuntu-22.04
+          - ref: 0.6.0
+            runner: ubuntu-22.04
+    name: ${{ matrix.config.ref }}
+    runs-on: ${{ matrix.config.runner }}
+    needs: build_wolfssl
+    steps:
+      - name: Install dependencies
+        run: |
+          # Don't prompt for anything
+          export DEBIAN_FRONTEND=noninteractive
+          sudo apt-get update
+          sudo apt-get install libgtest-dev
+
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-jwt-cpp
+
+      - name: Setup cmake version
+        uses: jwlawson/actions-setup-cmake@v2
+        with:
+          cmake-version: '3.25.x'
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Checkout jwt-cpp
+        uses: actions/checkout@v4
+        with:
+          repository: Thalhammer/jwt-cpp
+          path: jwt-cpp
+          ref: v${{ matrix.config.ref }}
+
+      - name: Build pam-ipmi
+        working-directory: jwt-cpp
+        run: |
+          patch -p1 < ../osp/jwt-cpp/${{ matrix.config.ref }}.patch
+          PKG_CONFIG_PATH=$GITHUB_WORKSPACE/build-dir/lib/pkgconfig \
+            cmake -DCMAKE_POLICY_VERSION_MINIMUM=3.5 -B build -DJWT_SSL_LIBRARY:STRING=wolfSSL -DJWT_BUILD_TESTS=ON .
+          make -j -C build
+          ldd ./build/tests/jwt-cpp-test | grep wolfssl
+
+      - name: Run jwt-cpp tests
+        working-directory: jwt-cpp
+        run: ./build/tests/jwt-cpp-test

.github/workflows/krb5.yml

@@ -0,0 +1,103 @@
+name: Kerberos 5 Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    # Just to keep it the same as the testing target
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 5
+    steps:
+      - name: workaround high-entropy ASLR
+        # not needed after either an update to llvm or runner is done
+        run: sudo sysctl vm.mmap_rnd_bits=28
+
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-krb CC='gcc -fsanitize=address'
+          install: true
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-krb5
+          path: build-dir.tgz
+          retention-days: 5
+
+  krb5_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        # List of releases to test
+        ref: [ 1.21.1 ]
+    name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 8
+    needs: build_wolfssl
+    steps:
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-krb5
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Checkout krb5
+        uses: actions/checkout@v4
+        with:
+          repository: krb5/krb5
+          ref: krb5-${{ matrix.ref }}-final
+          path: krb5
+
+      - name: Apply patch
+        working-directory: ./krb5
+        run: |
+          patch -p1 < $GITHUB_WORKSPACE/osp/krb5/Patch-for-Kerberos-5-${{ matrix.ref }}.patch
+
+      - name: workaround high-entropy ASLR
+        # not needed after either an update to llvm or runner is done
+        run: sudo sysctl vm.mmap_rnd_bits=28
+
+      - name: Build krb5
+        working-directory: ./krb5/src
+        run: |
+          autoreconf -ivf
+          # Using rpath because LD_LIBRARY_PATH is overwritten during testing
+          export WOLFSSL_CFLAGS="-I$GITHUB_WORKSPACE/build-dir/include -I$GITHUB_WORKSPACE/build-dir/include/wolfssl  -Wl,-rpath=$GITHUB_WORKSPACE/build-dir/lib"
+          export WOLFSSL_LIBS="-lwolfssl -L$GITHUB_WORKSPACE/build-dir/lib -Wl,-rpath=$GITHUB_WORKSPACE/build-dir/lib"
+          ./configure --with-crypto-impl=wolfssl --with-tls-impl=wolfssl --disable-pkinit --with-spake-openssl \
+            CFLAGS='-fsanitize=address' LDFLAGS='-fsanitize=address'
+          CFLAGS='-fsanitize=address' LDFLAGS='-fsanitize=address' make -j
+
+      - name: Run tests
+        working-directory: ./krb5/src
+        run: |
+          CFLAGS='-fsanitize=address' LDFLAGS='-fsanitize=address' make -j check
+

.github/workflows/libspdm.yml

@@ -0,0 +1,91 @@
+name: libspdm Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-all --enable-static CFLAGS='-DRSA_MIN_SIZE=512'
+          install: true
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-libspdm
+          path: build-dir.tgz
+          retention-days: 5
+
+  libspdm_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        # List of releases to test
+        ref: [ 3.7.0 ]
+    name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    needs: build_wolfssl
+    steps:
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-libspdm
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Checkout libspdm
+        uses: actions/checkout@v4
+        with:
+          repository: DMTF/libspdm
+          path: libspdm
+          ref: ${{ matrix.ref }}
+
+      - name: Build and test libspdm
+        working-directory: libspdm
+        run: |
+          patch -p1 < ../osp/libspdm/${{ matrix.ref }}/libspdm-${{ matrix.ref }}.patch
+          git submodule update --init --recursive
+          # Silence cmake version warnings
+          find -name CMakeLists.txt -exec sed -i 's/cmake_minimum_required.*/cmake_minimum_required(VERSION 3.10)/g' {} \;
+          mkdir build
+          cd build
+          cmake -DARCH=x64 -DTOOLCHAIN=GCC -DTARGET=Debug -DCRYPTO=wolfssl -DENABLE_BINARY_BUILD=1 \
+            -DCOMPILED_LIBWOLFSSL_PATH=$GITHUB_WORKSPACE/build-dir/lib/libwolfssl.a \
+            -DWOLFSSL_INCDIR=$GITHUB_WORKSPACE/build-dir/include ..
+          make -j
+          cd ../unit_test/sample_key
+          ../../build/bin/test_crypt
+          ../../build/bin/test_spdm_secured_message
+          ../../build/bin/test_spdm_crypt

.github/workflows/libssh2.yml

@@ -0,0 +1,90 @@
+name: libssh2 Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    # Just to keep it the same as the testing target
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-24.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-all
+          check: false # config is already tested in many other PRB's
+          install: true
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-libssh2
+          path: build-dir.tgz
+          retention-days: 5
+
+  libssh2_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        # List of releases to test
+        ref: [ 1.11.1 ]
+    name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-24.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 8
+    needs: build_wolfssl
+    steps:
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-libssh2
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Clone libssh2
+        uses: actions/checkout@v4
+        with:
+          repository: libssh2/libssh2
+          ref: libssh2-${{ matrix.ref }}
+          path: libssh2
+
+      - name: Build libssh2
+        working-directory: libssh2
+        run: |
+          autoreconf -fi
+          ./configure --with-crypto=wolfssl --with-libwolfssl-prefix=$GITHUB_WORKSPACE/build-dir
+
+      - name: Update libssh2 test to use a stable version of debian
+        working-directory: libssh2
+        run: |
+            sed -i 's/testing-slim/oldstable-slim/' tests/openssh_server/Dockerfile
+
+      - name: Run libssh2 tests
+        working-directory: libssh2
+        run: make -j check
+
+      - name: Confirm libssh2 built with wolfSSL
+        run: ldd libssh2/src/.libs/libssh2.so | grep wolfssl
+
+      - name: print server logs
+        if: ${{ failure() }}
+        run: tail -n +1 libssh2/tests/*.log

.github/workflows/libvncserver.yml

@@ -0,0 +1,91 @@
+name: libvncserver Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    # Just to keep it the same as the testing target
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-all
+          install: true
+          # Don't run tests as this config is tested in many other places
+          check: false
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-libvncserver
+          path: build-dir.tgz
+          retention-days: 5
+
+  build_libvncserver:
+    strategy:
+      fail-fast: false
+      matrix:
+        ref: [ 0.9.13, 0.9.14 ]
+    name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    needs: build_wolfssl
+    steps:
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-libvncserver
+
+      - name: Setup cmake version
+        uses: jwlawson/actions-setup-cmake@v2
+        with:
+          cmake-version: '3.25.x'
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Checkout libvncserver
+        uses: actions/checkout@v4
+        with:
+          repository: LibVNC/libvncserver
+          path: libvncserver
+          ref: LibVNCServer-${{ matrix.ref }}
+
+      - name: Build libvncserver
+        working-directory: libvncserver
+        run: |
+          patch -p1 < ../osp/libvncserver/${{ matrix.ref }}.patch
+          PKG_CONFIG_PATH=$GITHUB_WORKSPACE/build-dir/lib/pkgconfig \
+            cmake -DCMAKE_POLICY_VERSION_MINIMUM=3.5 -B build -DWITH_GNUTLS=OFF -DWITH_OPENSSL=OFF -DWITH_GCRYPT=OFF -DWITH_WOLFSSL=ON .
+          make -j -C build VERBOSE=1
+          ldd build/libvncclient.so | grep wolfssl
+          ldd build/libvncserver.so | grep wolfssl
+
+      - name: Run libvncserver tests
+        working-directory: libvncserver
+        run: make -C build test

.github/workflows/linuxkm.yml

@@ -0,0 +1,54 @@
+name: Kernel Module Build
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_library:
+    strategy:
+      matrix:
+        config: [
+          'EXTRA_CPPFLAGS=-Werror --enable-option-checking=fatal --enable-linuxkm --enable-linuxkm-lkcapi-register=all --enable-all --enable-kyber=yes,original --enable-lms --enable-xmss --enable-dilithium --enable-experimental --enable-dual-alg-certs --disable-qt --disable-quic --with-sys-crypto-policy=no --disable-opensslextra --disable-testcert --enable-intelasm --disable-sp-asm --enable-crypttests --enable-linuxkm-benchmarks CFLAGS="-DWOLFSSL_LINUXKM_VERBOSE_DEBUG -Wframe-larger-than=2048 -Wstack-usage=4096 -DBENCH_EMBEDDED -DBENCH_MIN_RUNTIME_SEC=0.01 -DBENCH_NTIMES=1 -DBENCH_AGREETIMES=1" --with-max-rsa-bits=16384',
+          'EXTRA_CPPFLAGS=-Werror --enable-option-checking=fatal --enable-linuxkm --enable-linuxkm-pie --enable-reproducible-build --enable-linuxkm-lkcapi-register=all --enable-all-crypto --enable-cryptonly --enable-kyber=yes,original --enable-lms --enable-xmss --enable-dilithium --enable-experimental --disable-qt --disable-quic --with-sys-crypto-policy=no --disable-opensslextra --disable-testcert --enable-intelasm --disable-sp-asm --enable-crypttests --enable-linuxkm-benchmarks CFLAGS="-DWOLFSSL_LINUXKM_VERBOSE_DEBUG -Wframe-larger-than=2048 -Wstack-usage=4096 -DBENCH_EMBEDDED -DBENCH_MIN_RUNTIME_SEC=0.01 -DBENCH_NTIMES=1 -DBENCH_AGREETIMES=1" --with-max-rsa-bits=16384'
+        ]
+    name: build module
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
+    timeout-minutes: 5
+    steps:
+      - uses: actions/checkout@v4
+        name: Checkout wolfSSL
+
+      - name: Prepare target kernel for module builds
+        run: |
+          echo "updating linux-headers"
+          sudo apt-get update || $(exit 2)
+          sudo apt-get install linux-headers-$(uname -r) -y || $(exit 3)
+          echo "preparing target kernel $(uname -r)"
+          pushd "/lib/modules/$(uname -r)/build" || $(exit 4)
+          if [ -f /proc/config.gz ]; then gzip -dc /proc/config.gz > /tmp/.config && sudo mv /tmp/.config . || $(exit 5); elif [ -f "/boot/config-$(uname -r)" ]; then sudo cp -p "/boot/config-$(uname -r)" .config || $(exit 6); fi
+          sudo make -j 4 olddefconfig || $(exit 7)
+          sudo make M="$(pwd)" modules_prepare || $(exit 8)
+          popd >/dev/null
+
+      - name: autogen.sh
+        run: |
+          ./autogen.sh || $(exit 9)
+
+      - name: Build libwolfssl.ko, targeting GitHub ubuntu-latest, with --enable-all, PQC, and smallstack and stack depth warnings
+        run: |
+          echo "running ./configure --with-linux-source=/lib/modules/$(uname -r)/build ${{ matrix.config }}"
+          ./configure --with-linux-source=/lib/modules/$(uname -r)/build ${{ matrix.config }} || $(exit 10)
+          # try to remove profiling (-pg) because it leads to "_mcleanup: gmon.out: Permission denied"
+          make -j 4 KERNEL_EXTRA_CFLAGS_REMOVE=-pg FORCE_NO_MODULE_SIG=1 || $(exit 11)
+          ls -l linuxkm/libwolfssl.ko || $(exit 12)
+          echo "Successful linuxkm build."

.github/workflows/macos-apple-native-cert-validation.yml

@@ -0,0 +1,26 @@
+name: MacOS apple native cert validation tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  make_check:
+    if: github.repository_owner == 'wolfssl'
+    runs-on: macos-latest
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 5
+    steps:
+      - name: Build and configure wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          configure: CFLAGS='-DWOLFSSL_APPLE_NATIVE_CERT_VALIDATION -DWOLFSSL_TEST_APPLE_NATIVE_CERT_VALIDATION -DRSA_MIN_SIZE=2048 -DNO_WOLFSSL_CIPHER_SUITE_TEST'
+

.github/workflows/main.yml

@@ -1,31 +0,0 @@
-name: CI
-concurrency:
-  group: ${{ github.ref }}
-  cancel-in-progress: true
-
-on:
-  push:
-    branches: [ 'master', 'main', 'release/**' ]
-  pull_request:
-    branches: [ '*' ]
-
-jobs:
-    espressif:
-        uses: ./.github/workflows/docker-Espressif.yml
-    multi-compiler:
-        uses: ./.github/workflows/multi-compiler.yml
-    openwrt:
-        uses: ./.github/workflows/docker-OpenWrt.yml
-    os-check:
-        uses: ./.github/workflows/os-check.yml
-    async:
-        uses: ./.github/workflows/async.yml
-    stunnel:
-        uses: ./.github/workflows/stunnel.yml
-    openvpn:
-        uses: ./.github/workflows/openvpn.yml
-    hostap:
-        uses: ./.github/workflows/hostap.yml
-# TODO: Currently this test fails. Enable it once it becomes passing.        
-#    haproxy:
-#        uses: ./.github/workflows/haproxy.yml

.github/workflows/mbedtls.sh

@@ -0,0 +1,79 @@
+#!/usr/bin/env bash
+
+set -e
+set -x
+
+# Basic TLS test
+./mbedtls/build/programs/ssl/ssl_server2 > /tmp/server.log 2>&1 &
+SERVER_PID=$!
+sleep 0.1
+./mbedtls/build/programs/ssl/ssl_client2 # Confirm working with mbed
+env -C wolfssl ./examples/client/client -p 4433 -g \
+  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
+  -c ../mbedtls/framework/data_files/cli-rsa-sha256.crt \
+  -k ../mbedtls/framework/data_files/cli-rsa-sha256.key.pem
+kill $SERVER_PID
+sleep 0.1
+env -C wolfssl ./examples/server/server -p 4433 -i -g \
+  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
+  -c ../mbedtls/framework/data_files/server2-sha256.crt \
+  -k ../mbedtls/framework/data_files/server2.key.pem > /tmp/server.log 2>&1 &
+SERVER_PID=$!
+sleep 0.1
+./mbedtls/build/programs/ssl/ssl_client2
+env -C wolfssl ./examples/client/client -p 4433 -g \
+  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
+  -c ../mbedtls/framework/data_files/cli-rsa-sha256.crt \
+  -k ../mbedtls/framework/data_files/cli-rsa-sha256.key.pem
+kill $SERVER_PID
+sleep 0.1
+
+# Basic DTLS test
+./mbedtls/build/programs/ssl/ssl_server2 dtls=1 > /tmp/server.log 2>&1 &
+SERVER_PID=$!
+sleep 0.1
+./mbedtls/build/programs/ssl/ssl_client2 dtls=1 # Confirm working with mbed
+env -C wolfssl ./examples/client/client -p 4433 -g -u \
+  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
+  -c ../mbedtls/framework/data_files/cli-rsa-sha256.crt \
+  -k ../mbedtls/framework/data_files/cli-rsa-sha256.key.pem
+kill $SERVER_PID
+sleep 0.1
+env -C wolfssl ./examples/server/server -p 4433 -i -g -u \
+  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
+  -c ../mbedtls/framework/data_files/server2-sha256.crt \
+  -k ../mbedtls/framework/data_files/server2.key.pem > /tmp/server.log 2>&1 &
+SERVER_PID=$!
+sleep 0.1
+env -C wolfssl ./examples/client/client -p 4433 -g -u \
+  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
+  -c ../mbedtls/framework/data_files/cli-rsa-sha256.crt \
+  -k ../mbedtls/framework/data_files/cli-rsa-sha256.key.pem
+./mbedtls/build/programs/ssl/ssl_client2 dtls=1
+kill $SERVER_PID
+sleep 0.1
+
+# DTLS 1.2 CID test
+./mbedtls/build/programs/ssl/ssl_server2 dtls=1 cid=1 cid_val=121212 > /tmp/server.log 2>&1 &
+SERVER_PID=$!
+sleep 0.1
+./mbedtls/build/programs/ssl/ssl_client2 dtls=1 cid=1 cid_val=232323  # Confirm working with mbed
+env -C wolfssl ./examples/client/client -p 4433 -g -u --cid 232323 \
+  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
+  -c ../mbedtls/framework/data_files/cli-rsa-sha256.crt \
+  -k ../mbedtls/framework/data_files/cli-rsa-sha256.key.pem
+kill $SERVER_PID
+sleep 0.1
+env -C wolfssl ./examples/server/server -p 4433 -i -g -u --cid 121212 \
+  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
+  -c ../mbedtls/framework/data_files/server2-sha256.crt \
+  -k ../mbedtls/framework/data_files/server2.key.pem > /tmp/server.log 2>&1 &
+SERVER_PID=$!
+sleep 0.1
+./mbedtls/build/programs/ssl/ssl_client2 dtls=1 cid_val=232323
+env -C wolfssl ./examples/client/client -p 4433 -g -u --cid 232323 \
+  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
+  -c ../mbedtls/framework/data_files/cli-rsa-sha256.crt \
+  -k ../mbedtls/framework/data_files/cli-rsa-sha256.key.pem
+kill $SERVER_PID
+sleep 0.1

.github/workflows/mbedtls.yml

@@ -0,0 +1,86 @@
+name: mbedtls interop Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+env:
+  MBED_REF: v3.6.2
+
+jobs:
+  build_mbedtls:
+    name: Build mbedtls
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 10
+    steps:
+      - name: Checking if we have mbed in cache
+        uses: actions/cache@v4
+        id: cache
+        with:
+          path: mbedtls
+          key: mbedtls-${{ env.MBED_REF }}
+          lookup-only: true
+
+      - name: Checkout mbedtls
+        if: steps.cache.outputs.cache-hit != 'true'
+        uses: actions/checkout@v4
+        with:
+          repository: Mbed-TLS/mbedtls
+          ref: ${{ env.MBED_REF }}
+          path: mbedtls
+
+      - name: Compile mbedtls
+        if: steps.cache.outputs.cache-hit != 'true'
+        working-directory: mbedtls
+        run: |
+          git submodule update --init
+          mkdir build
+          cd build
+          cmake ..
+          make -j
+          # convert key to pem format
+          openssl pkey -in framework/data_files/cli-rsa-sha256.key.der -text > framework/data_files/cli-rsa-sha256.key.pem
+          openssl pkey -in framework/data_files/server2.key.der -text > framework/data_files/server2.key.pem
+
+  mbedtls_test:
+    name: Test interop with mbedtls
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
+    needs: build_mbedtls
+    timeout-minutes: 10
+    steps:
+      - name: Disable IPv6 (IMPORTANT, OTHERWISE DTLS MBEDTLS CLIENT WON'T CONNECT)
+        run: echo 1 | sudo tee /proc/sys/net/ipv6/conf/lo/disable_ipv6
+
+      - name: Checking if we have mbed in cache
+        uses: actions/cache/restore@v4
+        id: cache
+        with:
+          path: mbedtls
+          key: mbedtls-${{ env.MBED_REF }}
+          fail-on-cache-miss: true
+
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-dtls --enable-dtlscid
+          install: false
+          check: false
+
+      - name: Test interop
+        run: bash wolfssl/.github/workflows/mbedtls.sh
+
+      - name: print server logs
+        if: ${{ failure() }}
+        run: cat /tmp/server.log

.github/workflows/memcached.sh

@@ -0,0 +1,14 @@
+#!/bin/sh
+
+if [ -z "$GITHUB_WORKSPACE" ]; then
+    echo '$GITHUB_WORKSPACE is not set'
+    exit 1
+fi
+
+if [ -z "$HOST_ROOT" ]; then
+    echo '$HOST_ROOT is not set'
+    exit 1
+fi
+
+chroot $HOST_ROOT make -C $GITHUB_WORKSPACE/memcached \
+    -j$(nproc) PARALLEL=$(nproc) test_tls

.github/workflows/memcached.yml

@@ -0,0 +1,123 @@
+name: memcached Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    # Just to keep it the same as the testing target
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-memcached
+          install: true
+
+      - name: Bundle Docker entry point
+        run: cp wolfssl/.github/workflows/memcached.sh build-dir/bin
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-memcached
+          path: build-dir.tgz
+          retention-days: 5
+
+  memcached_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        # List of releases to test
+        include:
+          - ref: 1.6.22
+    name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    needs: build_wolfssl
+    steps:
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-memcached
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Install dependencies
+        run: |
+            export DEBIAN_FRONTEND=noninteractive
+            sudo apt-get update
+            sudo apt-get install -y libevent-dev libevent-2.1-7 automake pkg-config make libio-socket-ssl-perl
+
+      - name: Checkout memcached
+        uses: actions/checkout@v4
+        with:
+          repository: memcached/memcached
+          ref: 1.6.22
+          path: memcached
+
+      - name: Configure and build memcached
+        run: |
+            cd $GITHUB_WORKSPACE/memcached/
+            patch -p1 < $GITHUB_WORKSPACE/osp/memcached/memcached_1.6.22.patch
+            ./autogen.sh
+            export LD_LIBRARY_PATH=$GITHUB_WORKSPACE/build-dir/lib:$LD_LIBRARY_PATH
+            PKG_CONFIG_PATH=$GITHUB_WORKSPACE/build-dir/lib/pkgconfig ./configure --enable-wolfssl
+            make -j$(nproc)
+
+      - name: Confirm memcached built with wolfSSL
+        working-directory: ./memcached
+        run: |
+          export LD_LIBRARY_PATH=$GITHUB_WORKSPACE/build-dir/lib:$LD_LIBRARY_PATH
+          ldd memcached | grep wolfssl
+
+      - name: Run memcached tests
+        working-directory: ./memcached
+        run: |
+          # Retry up to three times
+          # Using docker because interrupting the tests doesn't close running
+          # background servers. They can become daemonized and then all re-runs
+          # will always fail.
+          chmod +x $GITHUB_WORKSPACE/build-dir/bin/memcached.sh
+          for i in {1..3}; do
+            echo "-------- RUNNING TESTS --------"
+            MEMCACHED_RES=0 # Not set when command succeeds
+            # Tests should usually take less than 4 minutes. If already taking
+            # 5 minutes then they are probably stuck. Interrupt and re-run.
+            time timeout -s SIGKILL 5m docker run -v /:/host \
+              -v $GITHUB_WORKSPACE/build-dir/bin/memcached.sh:/memcached.sh \
+              -e GITHUB_WORKSPACE=$GITHUB_WORKSPACE \
+              -e HOST_ROOT=/host \
+              -e LD_LIBRARY_PATH=$GITHUB_WORKSPACE/build-dir/lib:$LD_LIBRARY_PATH \
+              alpine:latest /memcached.sh || MEMCACHED_RES=$?
+
+            if [ "$MEMCACHED_RES" -eq "0" ]; then
+              break
+            fi
+          done
+          echo "test ran $i times"
+          if [ "$MEMCACHED_RES" -ne "0" ]; then
+            exit $MEMCACHED_RES
+          fi

.github/workflows/mono.yml

@@ -0,0 +1,142 @@
+name: Linux Mono C# Build Test
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL C# Wrapper
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-24.04
+    timeout-minutes: 10
+    steps:
+
+    # Build wolfSSL using the user_settings.h from the C# wrapper directory
+    - name: Build wolfSSL
+      uses: wolfSSL/actions-build-autotools-project@v1
+      with:
+        path: wolfssl
+        configure: --enable-usersettings CPPFLAGS=-I$GITHUB_WORKSPACE/wolfssl/wrapper/CSharp
+        install: true
+        check: false
+
+    - name: Install mono-complete
+      run: |
+        sudo apt-get update
+        sudo apt-get install -y mono-complete
+
+    - name: Copy wolfSSL.dll to C# wrapper directory
+      run: |
+        echo "Copying wolfSSL.dll to C# wrapper directory. $GITHUB_WORKSPACE/build-dir/lib contains:"
+        ls -la $GITHUB_WORKSPACE/build-dir/lib/*
+        cp $GITHUB_WORKSPACE/build-dir/lib/libwolfssl.so $GITHUB_WORKSPACE/wolfssl/wrapper/CSharp/wolfssl.dll
+        cp $GITHUB_WORKSPACE/build-dir/lib/libwolfssl.so $GITHUB_WORKSPACE/wolfssl/wrapper/CSharp/libwolfssl.so
+
+    - name: Build and run wolfCrypt test wrapper
+      working-directory: wolfssl/wrapper/CSharp
+      run: |
+        mcs wolfCrypt-Test/wolfCrypt-Test.cs wolfSSL_CSharp/wolfCrypt.cs wolfSSL_CSharp/wolfSSL.cs wolfSSL_CSharp/X509.cs -OUT:wolfcrypttest.exe
+        mono wolfcrypttest.exe
+
+    - name: Build wolfSSL client/server test
+      working-directory: wolfssl/wrapper/CSharp
+      env:
+        LD_LIBRARY_PATH: $GITHUB_WORKSPACE/build-dir/lib
+      run: |
+        mcs wolfSSL_CSharp/wolfSSL.cs wolfSSL_CSharp/X509.cs wolfSSL-TLS-Server/wolfSSL-TLS-Server.cs -OUT:server.exe
+        mcs wolfSSL_CSharp/wolfCrypt.cs wolfSSL-TLS-Client/wolfSSL-TLS-Client.cs wolfSSL_CSharp/wolfSSL.cs wolfSSL_CSharp/X509.cs -OUT:client.exe
+
+    - name: Test wolfSSL client/server communication
+      working-directory: wolfssl/wrapper/CSharp
+      env:
+        LD_LIBRARY_PATH: $GITHUB_WORKSPACE/build-dir/lib
+      run: |
+        # Start server in background and capture its PID
+        timeout 10s mono server.exe > server.log 2>&1 &
+        SERVER_PID=$!
+
+        # Wait for server to start
+        sleep 2
+
+        # Run client and capture output
+        timeout 5s mono client.exe > client.log 2>&1
+        CLIENT_EXIT_CODE=$?
+
+        # Wait a moment for server to process
+        sleep 1
+
+        # Kill server
+        kill $SERVER_PID 2>/dev/null || true
+
+        # Check if client completed successfully (exit code 0)
+        if [ $CLIENT_EXIT_CODE -eq 0 ]; then
+          echo "Client completed successfully"
+        else
+          echo "Client failed with exit code $CLIENT_EXIT_CODE"
+          cat client.log
+          exit 1
+        fi
+
+        # Check for success indicators in logs
+        if grep -q "SSL version is" client.log && grep -q "SSL cipher suite is" client.log; then
+          echo "TLS handshake successful - SSL version and cipher suite detected"
+        else
+          echo "TLS handshake failed - no SSL version/cipher detected"
+          echo "Client log:"
+          cat client.log
+          echo "Server log:"
+          cat server.log
+          exit 1
+        fi
+
+    - name: Test SNI functionality
+      working-directory: wolfssl/wrapper/CSharp
+      env:
+        LD_LIBRARY_PATH: $GITHUB_WORKSPACE/build-dir/lib
+      run: |
+        # Start server with SNI support in background
+        timeout 10s mono server.exe -S > server_sni.log 2>&1 &
+        SERVER_PID=$!
+
+        # Wait for server to start
+        sleep 2
+
+        # Run client with SNI and capture output
+        timeout 5s mono client.exe -S localhost > client_sni.log 2>&1
+        CLIENT_EXIT_CODE=$?
+
+        # Wait a moment for server to process
+        sleep 1
+
+        # Kill server
+        kill $SERVER_PID 2>/dev/null || true
+
+        # Check if client completed successfully
+        if [ $CLIENT_EXIT_CODE -eq 0 ]; then
+          echo "SNI client completed successfully"
+        else
+          echo "SNI client failed with exit code $CLIENT_EXIT_CODE"
+          cat client_sni.log
+          exit 1
+        fi
+
+        # Check for SNI success indicators
+        if grep -q "SSL version is" client_sni.log && grep -q "SSL cipher suite is" client_sni.log; then
+          echo "SNI TLS handshake successful"
+        else
+          echo "SNI TLS handshake failed"
+          echo "Client log:"
+          cat client_sni.log
+          echo "Server log:"
+          cat server_sni.log
+          exit 1
+        fi

.github/workflows/mosquitto.yml

@@ -0,0 +1,105 @@
+name: mosquitto Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    # Just to keep it the same as the testing target
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-mosquitto CFLAGS="-DALLOW_INVALID_CERTSIGN"
+          install: true
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-mosquitto
+          path: build-dir.tgz
+          retention-days: 5
+
+  mosquitto_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        ref: [ 2.0.18 ]
+    name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    needs: build_wolfssl
+    steps:
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-mosquitto
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Install dependencies
+        run: |
+            export DEBIAN_FRONTEND=noninteractive
+            sudo apt-get update
+            sudo apt-get install -y build-essential libev-dev libssl-dev automake python3-docutils libcunit1 libcunit1-doc libcunit1-dev pkg-config make python3-psutil
+
+      - name: Checkout mosquitto
+        uses: actions/checkout@v4
+        with:
+          repository: eclipse/mosquitto
+          ref: v${{ matrix.ref }}
+          path: mosquitto
+
+      - name: Update certs
+        run: |
+            cd $GITHUB_WORKSPACE/mosquitto/test/ssl
+            ./gen.sh
+            cat all-ca.crt >> server.crt
+
+      - name: Configure and build mosquitto
+        run: |
+            cd $GITHUB_WORKSPACE/mosquitto/
+            patch -p1 < $GITHUB_WORKSPACE/osp/mosquitto/${{ matrix.ref }}.patch
+            make WITH_TLS=wolfssl WITH_CJSON=no WITH_DOCS=no WOLFSSLDIR=$GITHUB_WORKSPACE/build-dir
+
+      - name: Run mosquitto tests
+        working-directory: ./mosquitto
+        run: |
+          # Retry up to five times
+          for i in {1..5}; do
+            TEST_RES=0
+            make WITH_TLS=wolfssl WITH_CJSON=no WITH_DOCS=no WOLFSSLDIR=$GITHUB_WORKSPACE/build-dir ptest || TEST_RES=$?
+            if [ "$TEST_RES" -eq "0" ]; then
+              break
+            fi
+          done
+          if [ "$TEST_RES" -ne "0" ]; then
+            exit $TEST_RES
+          fi

.github/workflows/msys2.yml

@@ -0,0 +1,37 @@
+name: MSYS2 Build Test
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  msys2:
+    if: github.repository_owner == 'wolfssl'
+    runs-on: windows-latest
+    defaults:
+      run:
+        shell: msys2 {0}
+    steps:
+      - uses: actions/checkout@v3
+      - uses: msys2/setup-msys2@v2
+        with:
+          msystem: msys
+          update: true
+          install: git gcc autotools base-devel autoconf netcat
+      - name: configure wolfSSL
+        run: ./autogen.sh && ./configure --disable-sys-ca-certs CFLAGS="-DUSE_CERT_BUFFERS_2048 -DUSE_CERT_BUFFERS_256 -DNO_WRITE_TEMP_FILES"
+      - name: build wolfSSL
+        run: make
+      - name: run tests
+        run: make check
+      - name: Display log
+        if: always()
+        run: cat test-suite.log

.github/workflows/multi-arch.yml

@@ -0,0 +1,66 @@
+name: Multiple architectures
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  my_matrix:
+    name: Multi-arch test
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - HOST: aarch64-linux-gnu
+            CC: aarch64-linux-gnu-gcc
+            ARCH: arm64
+            EXTRA_OPTS: --enable-sp-asm --enable-armasm
+          - HOST: arm-linux-gnueabihf
+            CC: arm-linux-gnueabihf-gcc
+            ARCH: armhf
+            EXTRA_OPTS: --enable-sp-asm
+          - HOST: riscv64-linux-gnu
+            CC: riscv64-linux-gnu-gcc
+            ARCH: riscv64
+            EXTRA_OPTS: --enable-riscv-asm
+          # Config to ensure CPUs without Thumb instructions compiles
+          - HOST: arm-linux-gnueabi
+            CC: arm-linux-gnueabi-gcc
+            CFLAGS: -marm -DWOLFSSL_SP_ARM_ARCH=6
+            ARCH: armel
+            EXTRA_OPTS: --enable-sp-asm
+        opts: [ '-O2', '-O3', '-O1 -UFP_ECC', '-O0', '-Os', '-Ofast' ]
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 10
+    steps:
+      - name: Install Compiler
+        run: |
+          sudo apt update
+          sudo apt install -y crossbuild-essential-${{ matrix.ARCH }} qemu-user
+      - uses: actions/checkout@v4
+      - name: Build for ${{ matrix.ARCH }} with Opt Level ${{ matrix.opts }}
+        env:
+            CC: ${{ matrix.CC }}
+            CFLAGS: ${{ matrix.CFLAGS }} ${{ matrix.opts }}
+            QEMU_LD_PREFIX: /usr/${{ matrix.HOST }}
+        run: ./autogen.sh && ./configure --host=${{ matrix.HOST }} --enable-all --disable-examples CPPFLAGS="-pedantic -Wdeclaration-after-statement -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE -DWOLFCRYPT_TEST_LINT" ${{ matrix.EXTRA_OPTS }} && make
+      - name: Print errors
+        if: ${{ failure() }}
+        run: |
+          if [ -f config.log ] ; then
+            cat config.log
+          fi
+      - name: Run WolfCrypt Tests
+        env:
+            QEMU_LD_PREFIX: /usr/${{ matrix.HOST }}
+        run: ./wolfcrypt/test/testwolfcrypt

.github/workflows/multi-compiler.yml

@@ -1,7 +1,16 @@
 name: Multiple compilers and versions
 
+# START OF COMMON SECTION
 on:
-  workflow_call:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
 
 jobs:
   my_matrix:
@@ -12,23 +21,42 @@ jobs:
         include:
           - CC: gcc-9
             CXX: g++-9
+            OS: ubuntu-24.04
           - CC: gcc-10
             CXX: g++-10
+            OS: ubuntu-24.04
           - CC: gcc-11
             CXX: g++-11
+            OS: ubuntu-24.04
           - CC: gcc-12
             CXX: g++-12
+            OS: ubuntu-24.04
+          - CC: clang-11
+            CXX: clang++-11
+            OS: ubuntu-22.04
           - CC: clang-12
             CXX: clang++-12
+            OS: ubuntu-22.04
           - CC: clang-13
             CXX: clang++-13
+            OS: ubuntu-22.04
           - CC: clang-14
             CXX: clang++-14
-    runs-on: ubuntu-latest
+            OS: ubuntu-24.04
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ${{ matrix.OS }}
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
     steps:
-      - uses: actions/checkout@v3
+      - name: Install dependencies
+        run: export DEBIAN_FRONTEND=noninteractive && sudo apt-get update && sudo apt-get install -y ${{ matrix.CC }}
+      - uses: actions/checkout@v4
       - name: Build
         env:
             CC: ${{ matrix.CC }}
             CXX: ${{ matrix.CXX }}
-        run: ./autogen.sh && ./configure && make && make dist
+        run: ./autogen.sh && ./configure CFLAGS="-pedantic -Wdeclaration-after-statement" && make && make dist
+      - name: Show log on errors
+        if: ${{ failure() }}
+        run: |
+            cat config.log

.github/workflows/net-snmp.yml

@@ -0,0 +1,84 @@
+name: net-snmp Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-net-snmp
+          install: true
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-net-snmp
+          path: build-dir.tgz
+          retention-days: 5
+
+  net-snmp_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        # List of releases to test
+        include:
+          - ref: 5.9.3
+            test_opts: -e 'agentxperl'
+    name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    needs: build_wolfssl
+    steps:
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-net-snmp
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Build net-snmp
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          repository: net-snmp/net-snmp
+          ref: v${{ matrix.ref }}
+          path: net-snmp
+          patch-file: $GITHUB_WORKSPACE/osp/net-snmp/${{ matrix.ref }}.patch
+          configure: --disable-shared --with-wolfssl=$GITHUB_WORKSPACE/build-dir
+          check: false
+
+      - name: Run net-snmp tests
+        working-directory: net-snmp
+        run: |
+          autoconf --version | grep -P '2\.\d\d' -o > dist/autoconf-version
+          make -j test TESTOPTS="${{ matrix.test_opts }}"

.github/workflows/nginx.yml

@@ -0,0 +1,247 @@
+name: nginx Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - if: ${{ runner.debug }}
+        name: Enable wolfSSL debug logging
+        run: |
+          # We don't use --enable-debug since it makes the logs too loud
+          echo "wolf_debug_flags= CFLAGS='-g3 -O0'" >> $GITHUB_ENV
+
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-nginx ${{ env.wolf_debug_flags }}
+          install: true
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-nginx
+          path: build-dir.tgz
+          retention-days: 5
+
+  nginx_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          # in general we want to pass all tests that match *ssl*
+          - ref: 1.25.0
+            test-ref: 5b2894ea1afd01a26c589ce11f310df118e42592
+            # Following tests pass with sanitizer on
+            sanitize-ok: >-
+              h2_ssl_proxy_cache.t h2_ssl.t h2_ssl_variables.t h2_ssl_verify_client.t
+              mail_imap_ssl.t mail_ssl_conf_command.t mail_ssl_session_reuse.t
+              mail_ssl.t proxy_ssl_certificate_empty.t proxy_ssl_certificate.t
+              proxy_ssl_certificate_vars.t proxy_ssl_conf_command.t proxy_ssl_name.t
+              ssl_certificate_chain.t ssl_certificate_perl.t ssl_certificates.t
+              ssl_certificate.t ssl_client_escaped_cert.t ssl_conf_command.t
+              ssl_crl.t ssl_curve.t ssl_engine_keys.t ssl_ocsp.t ssl_password_file.t
+              ssl_proxy_protocol.t ssl_proxy_upgrade.t ssl_reject_handshake.t
+              ssl_session_reuse.t ssl_session_ticket_key.t ssl_sni_reneg.t
+              ssl_sni_sessions.t ssl_sni.t ssl_stapling.t ssl.t ssl_verify_client.t
+              ssl_verify_depth.t stream_proxy_ssl_certificate.t stream_proxy_ssl_certificate_vars.t
+              stream_proxy_ssl_conf_command.t stream_proxy_ssl_name_complex.t
+              stream_proxy_ssl_name.t stream_ssl_certificate.t stream_ssl_conf_command.t
+              stream_ssl_preread_alpn.t stream_ssl_preread_protocol.t stream_ssl_preread.t
+              stream_ssl_realip.t stream_ssl_session_reuse.t stream_ssl.t stream_ssl_variables.t
+              stream_ssl_verify_client.t stream_upstream_zone_ssl.t upstream_zone_ssl.t
+              uwsgi_ssl_certificate.t uwsgi_ssl_certificate_vars.t uwsgi_ssl.t
+              uwsgi_ssl_verify.t
+            # Following tests do not pass with sanitizer on (with OpenSSL too)
+            sanitize-not-ok: >-
+              grpc_ssl.t h2_proxy_request_buffering_ssl.t h2_proxy_ssl.t
+              proxy_request_buffering_ssl.t proxy_ssl_keepalive.t proxy_ssl.t
+              proxy_ssl_verify.t stream_proxy_protocol_ssl.t stream_proxy_ssl.t
+              stream_proxy_ssl_verify.t stream_ssl_alpn.t
+          - ref: 1.24.0
+            test-ref: 212d9d003886e3a24542855fb60355a417f037de
+            # Following tests pass with sanitizer on
+            sanitize-ok: >-
+              h2_ssl_proxy_cache.t h2_ssl.t h2_ssl_variables.t h2_ssl_verify_client.t
+              mail_imap_ssl.t mail_ssl_conf_command.t mail_ssl_session_reuse.t mail_ssl.t
+              proxy_ssl_certificate_empty.t proxy_ssl_certificate.t proxy_ssl_certificate_vars.t
+              proxy_ssl_name.t ssl_certificate_chain.t ssl_certificate_perl.t ssl_certificates.t
+              ssl_certificate.t ssl_client_escaped_cert.t ssl_conf_command.t ssl_crl.t
+              ssl_engine_keys.t ssl_ocsp.t ssl_password_file.t ssl_proxy_protocol.t
+              ssl_proxy_upgrade.t ssl_reject_handshake.t ssl_session_reuse.t
+              ssl_session_ticket_key.t ssl_sni_reneg.t ssl_sni_sessions.t ssl_sni.t
+              ssl_stapling.t ssl.t ssl_verify_client.t stream_proxy_ssl_certificate.t
+              stream_proxy_ssl_certificate_vars.t stream_proxy_ssl_name_complex.t
+              stream_proxy_ssl_name.t stream_ssl_alpn.t stream_ssl_certificate.t
+              stream_ssl_conf_command.t stream_ssl_preread_alpn.t stream_ssl_preread_protocol.t
+              stream_ssl_preread.t stream_ssl_realip.t stream_ssl_session_reuse.t stream_ssl.t
+              stream_ssl_variables.t stream_ssl_verify_client.t stream_upstream_zone_ssl.t
+              upstream_zone_ssl.t uwsgi_ssl_certificate.t uwsgi_ssl_certificate_vars.t
+              uwsgi_ssl.t uwsgi_ssl_verify.t
+            # Following tests do not pass with sanitizer on (with OpenSSL too)
+            sanitize-not-ok: >-
+              grpc_ssl.t h2_proxy_request_buffering_ssl.t h2_proxy_ssl.t
+              proxy_request_buffering_ssl.t proxy_ssl_conf_command.t proxy_ssl_keepalive.t
+              proxy_ssl.t proxy_ssl_verify.t ssl_curve.t ssl_verify_depth.t
+              stream_proxy_protocol_ssl.t stream_proxy_ssl_conf_command.t stream_proxy_ssl.t
+              stream_proxy_ssl_verify.t
+    name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 6
+    needs: build_wolfssl
+    steps:
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-nginx
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Install dependencies
+        run: |
+          sudo cpan -iT Proc::Find
+
+      # Locking in the version of SSLeay used with testing
+      - name: Download and install Net::SSLeay 1.94 manually
+        run: |
+          curl -LO https://www.cpan.org/modules/by-module/Net/CHRISN/Net-SSLeay-1.94.tar.gz
+          tar -xzf Net-SSLeay-1.94.tar.gz
+          cd Net-SSLeay-1.94
+          perl Makefile.PL
+          make
+          sudo make install
+
+      # SSL version 2.091 changes '' return to undef causing test case to fail.
+      # Locking in the test version to use as 2.090
+      - name: Download and install IO::Socket::SSL 2.090 manually
+        run: |
+          curl -LO https://www.cpan.org/modules/by-module/IO/IO-Socket-SSL-2.090.tar.gz
+          tar -xzf IO-Socket-SSL-2.090.tar.gz
+          cd IO-Socket-SSL-2.090
+          perl Makefile.PL
+          make
+          sudo make install
+
+      - name: Checkout wolfssl-nginx
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/wolfssl-nginx
+          path: wolfssl-nginx
+
+      - name: Checkout nginx
+        uses: actions/checkout@v4
+        with:
+          repository: nginx/nginx
+          path: nginx
+          ref: release-${{ matrix.ref }}
+
+      - name: Apply nginx patch
+        working-directory: nginx
+        run: patch -p1 < ../wolfssl-nginx/nginx-${{ matrix.ref }}-wolfssl.patch
+
+      - if: ${{ runner.debug }}
+        name: Apply nginx debug patch
+        working-directory: nginx
+        run: patch -p1 < ../wolfssl-nginx/nginx-${{ matrix.ref }}-wolfssl-debug.patch
+
+      - name: Checkout nginx-tests
+        uses: actions/checkout@v4
+        with:
+          repository: nginx/nginx-tests
+          path: nginx-tests
+          ref: ${{ matrix.test-ref }}
+
+      - name: Apply nginx-tests patch
+        working-directory: nginx-tests
+        run: patch -p1 < ../wolfssl-nginx/nginx-tests-patches/*${{ matrix.test-ref }}.patch
+
+      - name: Build nginx without sanitizer
+        working-directory: nginx
+        run: |
+          ./auto/configure --with-wolfssl=$GITHUB_WORKSPACE/build-dir --with-http_ssl_module \
+            --with-stream --with-stream_ssl_module --with-stream_ssl_preread_module \
+            --with-http_v2_module --with-mail --with-mail_ssl_module
+          make -j
+
+      - name: Confirm nginx built with wolfSSL
+        working-directory: nginx
+        run: ldd objs/nginx | grep wolfssl
+
+      - if: ${{ runner.debug }}
+        name: Run nginx-tests without sanitizer (debug)
+        working-directory: nginx-tests
+        run: |
+          LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$GITHUB_WORKSPACE/build-dir/lib \
+            TMPDIR=$GITHUB_WORKSPACE TEST_NGINX_VERBOSE=y TEST_NGINX_CATLOG=y \
+            TEST_NGINX_BINARY=../nginx/objs/nginx prove -v ${{ matrix.sanitize-not-ok }}
+
+      - if: ${{ !runner.debug }}
+        name: Run nginx-tests without sanitizer
+        working-directory: nginx-tests
+        run: |
+          LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$GITHUB_WORKSPACE/build-dir/lib \
+            TMPDIR=$GITHUB_WORKSPACE TEST_NGINX_BINARY=../nginx/objs/nginx \
+            prove ${{ matrix.sanitize-not-ok }}
+
+      - if: ${{ runner.debug }}
+        name: Enable wolfSSL debug logging
+        run: |
+          echo "nginx_c_flags=-O0" >> $GITHUB_ENV
+
+      - name: workaround high-entropy ASLR
+        # not needed after either an update to llvm or runner is done
+        run: sudo sysctl vm.mmap_rnd_bits=28
+
+      - name: Build nginx with sanitizer
+        working-directory: nginx
+        run: |
+          ./auto/configure --with-wolfssl=$GITHUB_WORKSPACE/build-dir --with-http_ssl_module \
+            --with-stream --with-stream_ssl_module --with-stream_ssl_preread_module \
+            --with-http_v2_module --with-mail --with-mail_ssl_module \
+            --with-cc-opt='-fsanitize=address -DNGX_DEBUG_PALLOC=1 -g3 ${{ env.nginx_c_flags }}' \
+            --with-ld-opt='-fsanitize=address ${{ env.nginx_c_flags }}'
+          make -j
+
+      - name: Confirm nginx built with wolfSSL
+        working-directory: nginx
+        run: ldd objs/nginx | grep wolfssl
+
+      - if: ${{ runner.debug }}
+        name: Run nginx-tests with sanitizer (debug)
+        working-directory: nginx-tests
+        run: |
+          LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$GITHUB_WORKSPACE/build-dir/lib \
+          TMPDIR=$GITHUB_WORKSPACE TEST_NGINX_VERBOSE=y TEST_NGINX_CATLOG=y \
+          TEST_NGINX_BINARY=../nginx/objs/nginx prove -v ${{ matrix.sanitize-ok }}
+
+      - if: ${{ !runner.debug }}
+        name: Run nginx-tests with sanitizer
+        working-directory: nginx-tests
+        run: |
+          LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$GITHUB_WORKSPACE/build-dir/lib \
+            TMPDIR=$GITHUB_WORKSPACE TEST_NGINX_BINARY=../nginx/objs/nginx \
+            prove ${{ matrix.sanitize-ok }}
+

.github/workflows/no-malloc.yml

@@ -0,0 +1,44 @@
+name: No Malloc Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  make_check:
+    strategy:
+      matrix:
+        config: [
+          # Add new configs here
+          '--enable-rsa --enable-keygen --disable-dh CFLAGS="-DWOLFSSL_NO_MALLOC -DRSA_MIN_SIZE=1024 -pedantic -Wdeclaration-after-statement -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE"',
+        ]
+    name: make check
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 6
+    steps:
+      - uses: actions/checkout@v4
+        name: Checkout wolfSSL
+
+      - name: Test wolfSSL
+        run: |
+          ./autogen.sh
+          ./configure ${{ matrix.config }}
+          make
+          ./wolfcrypt/test/testwolfcrypt
+
+      - name: Print errors
+        if: ${{ failure() }}
+        run: |
+          if [ -f test-suite.log ] ; then
+            cat test-suite.log
+          fi

.github/workflows/no-tls.yml

@@ -0,0 +1,49 @@
+name: --disable-tls Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  make_check:
+    strategy:
+      matrix:
+        config: [
+          # Add new configs here
+          '--disable-tls --enable-all CFLAGS="-pedantic -Wdeclaration-after-statement -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE"',
+        ]
+    name: make check
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 6
+    steps:
+      - uses: actions/checkout@v4
+        name: Checkout wolfSSL
+
+      - name: Test wolfSSL
+        run: |
+          ./autogen.sh
+          ./configure ${{ matrix.config }}
+          make -j 4
+          make check
+
+      - name: Print errors
+        if: ${{ failure() }}
+        run: |
+          for file in scripts/*.log
+          do
+              if [ -f "$file" ]; then
+                  echo "${file}:"
+                  cat "$file"
+                  echo "========================================================================"
+              fi
+          done

.github/workflows/nss.sh

@@ -0,0 +1,27 @@
+#!/usr/bin/env bash
+
+set -e
+set -x
+
+# Setup nss cert db
+mkdir nssdb
+./dist/Debug/bin/certutil -d nssdb -N --empty-password
+./dist/Debug/bin/certutil -d nssdb  -A -a -i  wolfssl/certs/test/server-localhost.pem \
+    -t TCP -n 'wolf localhost'
+
+# App data for nss
+echo Hello from nss > /tmp/in
+
+# TLS 1.3 test
+env -C wolfssl ./examples/server/server -v 4 -p 4433 \
+    -c certs/test/server-localhost.pem -d -w > /tmp/server.log 2>&1 &
+sleep 0.1
+./dist/Debug/bin/tstclnt -V tls1.3: -h localhost -p 4433 -d nssdb -C -4 -A /tmp/in -v
+sleep 0.1
+
+# DTLS 1.3 test
+env -C wolfssl ./examples/server/server -v 4 -p 4433 -u \
+    -c certs/test/server-localhost.pem -d -w > /tmp/server.log 2>&1 &
+sleep 0.1
+./dist/Debug/bin/tstclnt -V tls1.3: -P client -h localhost -p 4433 -d nssdb -C -4 -A /tmp/in -v
+sleep 0.1

.github/workflows/nss.yml

@@ -0,0 +1,89 @@
+name: nss interop Tests
+
+### TODO uncomment stuff
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+env:
+  NSS_REF: NSS_3_107_RTM
+
+jobs:
+  build_nss:
+    name: Build nss
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 30
+    steps:
+      - name: Checking if we have nss in cache
+        uses: actions/cache@v4
+        id: cache
+        with:
+          path: dist
+          key: nss-${{ env.NSS_REF }}
+          lookup-only: true
+
+      - name: Install dependencies
+        if: steps.cache.outputs.cache-hit != 'true'
+        run: |
+          # Don't prompt for anything
+          export DEBIAN_FRONTEND=noninteractive
+          sudo apt-get update
+          # hostap dependencies
+          sudo apt-get install -y gyp ninja-build
+
+      - name: Checkout nss
+        if: steps.cache.outputs.cache-hit != 'true'
+        uses: actions/checkout@v4
+        with:
+          repository: nss-dev/nss
+          ref: ${{ env.NSS_REF }}
+          path: nss
+
+      - name: Compile nss
+        if: steps.cache.outputs.cache-hit != 'true'
+        run: |
+          hg clone https://hg.mozilla.org/projects/nspr
+          cd nss
+          ./build.sh
+
+  nss_test:
+    name: Test interop with nss
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    needs: build_nss
+    timeout-minutes: 10
+    steps:
+      - name: Checking if we have nss in cache
+        uses: actions/cache/restore@v4
+        id: cache
+        with:
+          path: dist
+          key: nss-${{ env.NSS_REF }}
+          fail-on-cache-miss: true
+
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-dtls --enable-dtls13
+          install: false
+          check: false
+
+      - name: Test interop
+        run: bash wolfssl/.github/workflows/nss.sh
+
+      - name: print server logs
+        if: ${{ failure() }}
+        run: |
+          cat /tmp/server.log

.github/workflows/ntp.yml

@@ -0,0 +1,93 @@
+name: ntp Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-all
+          install: true
+          check: false
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-ntp
+          path: build-dir.tgz
+          retention-days: 5
+
+  ntp_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        # List of releases to test
+        ref: [ 4.2.8p15, 4.2.8p17 ]
+    name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 10
+    needs: build_wolfssl
+    steps:
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-ntp
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      # Avoid DoS'ing ntp site so cache the tar.gz
+      - name: Check if we have ntp
+        uses: actions/cache@v4
+        id: cache
+        with:
+          path: ntp-${{ matrix.ref }}.tar.gz
+          key: ntp-${{ matrix.ref }}.tar.gz
+
+      - name: Download ntp
+        if: steps.cache.outputs.cache-hit != 'true'
+        run: |
+          wget https://downloads.nwtime.org/ntp/4.2.8/ntp-${{ matrix.ref }}.tar.gz
+
+      - name: Extract ntp
+        run: |
+          tar -xf ntp-${{ matrix.ref }}.tar.gz
+
+      - name: Build and test ntp
+        working-directory: ntp-${{ matrix.ref }}
+        run: |
+          patch -p1 < $GITHUB_WORKSPACE/osp/ntp/${{ matrix.ref }}/ntp-${{ matrix.ref }}.patch
+          ./bootstrap
+          ./configure --with-wolfssl=$GITHUB_WORKSPACE/build-dir
+          make -j
+          make -j check

.github/workflows/ocsp.yml

@@ -0,0 +1,38 @@
+name: OCSP Test
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  ocsp_stapling:
+    name: ocsp stapling
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    timeout-minutes: 10
+    steps:
+      - name: Checkout wolfSSL
+        uses: actions/checkout@v4
+
+      - name: Build wolfSSL
+        run: autoreconf -ivf && ./configure --enable-ocsp --enable-ocspstapling && make
+
+      - name: Start OCSP responder 1
+        run: openssl ocsp -port 22221 -ndays 1000 -index certs/ocsp/index-intermediate1-ca-issued-certs.txt -rsigner certs/ocsp/ocsp-responder-cert.pem -rkey certs/ocsp/ocsp-responder-key.pem -CA certs/ocsp/intermediate1-ca-cert.pem &
+
+      - name: Start OCSP responder 2
+        run: openssl ocsp -port 22220 -ndays 1000 -index certs/ocsp/index-ca-and-intermediate-cas.txt -rsigner certs/ocsp/ocsp-responder-cert.pem -rkey certs/ocsp/ocsp-responder-key.pem -CA certs/ocsp/root-ca-cert.pem &
+
+      - name: Start TLS server
+        run: ./examples/server/server -p 11111 -c ./certs/ocsp/server1-cert.pem -k ./certs/ocsp/server1-key.pem -d &
+
+      - name: Test Look Up
+        run: ./examples/client/client -A ./certs/ocsp/root-ca-cert.pem -o

.github/workflows/openldap.yml

@@ -0,0 +1,93 @@
+name: openldap Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-openldap CPPFLAGS=-DWOLFSSL_NO_ASN_STRICT
+          install: true
+          check: true
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-openldap
+          path: build-dir.tgz
+          retention-days: 5
+
+  openldap_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          # List of releases to test
+          - osp_ref: 2.5.13
+            git_ref: OPENLDAP_REL_ENG_2_5_13
+          - osp_ref: 2.6.7
+            git_ref: OPENLDAP_REL_ENG_2_6_7
+    name: ${{ matrix.osp_ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 20
+    needs: build_wolfssl
+    steps:
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-openldap
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Checkout openldap
+        uses: actions/checkout@v4
+        with:
+          repository: openldap/openldap
+          path: openldap
+          ref: ${{ matrix.git_ref }}
+
+      - name: Build and test OpenLDAP
+        working-directory: openldap
+        run: |
+          export LD_LIBRARY_PATH=$GITHUB_WORKSPACE/build-dir/lib:$LD_LIBRARY_PATH
+          patch -p1 < $GITHUB_WORKSPACE/osp/openldap/${{ matrix.osp_ref }}/openldap-${{ matrix.osp_ref }}.patch
+          rm aclocal.m4
+          autoreconf -ivf
+          ./configure --with-tls=wolfssl --disable-bdb --disable-hdb \
+            CFLAGS="-I$GITHUB_WORKSPACE/build-dir/include \
+              -I$GITHUB_WORKSPACE/build-dir/include/wolfssl \
+              -L$GITHUB_WORKSPACE/build-dir/lib"
+          make -j depend
+          make -j
+          make -j check

.github/workflows/openssh.yml

@@ -0,0 +1,105 @@
+name: openssh Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: >-
+            --enable-openssh --enable-dsa --with-max-rsa-bits=8192
+            --enable-intelasm --enable-sp-asm CFLAGS="-DRSA_MIN_SIZE=1024"
+          install: true
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-openssh
+          path: build-dir.tgz
+          retention-days: 5
+
+  openssh_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          # A good way to measure how much each test takes is to create a bash script
+          # in the openssh root like this (make it executable):
+          # time-measure.sh
+          #   #!/bin/bash
+          #   /usr/bin/time -a -o /tmp/LTESTS-times.txt -f '%e %C' /usr/bin/bash "$@"
+          # And invoke the openssh tests like this:
+          #   rm -f /tmp/LTESTS-times.txt && \
+          #     make tests TEST_SHELL=$(pwd)/time-measure.sh SKIP_UNIT=yes && \
+          #     grep test-exec.sh /tmp/LTESTS-times.txt
+          - git_ref: 'V_9_6_P1'
+            osp_ver: '9.6'
+            SKIP_LTESTS: >-
+              exit-status rekey multiplex cert-userkey forward-control integrity
+              channel-timeout connection-timeout
+          - git_ref: 'V_9_9_P2'
+            osp_ver: '9.9p2'
+            SKIP_LTESTS: >-
+              exit-status rekey multiplex cert-userkey forward-control integrity
+              channel-timeout connection-timeout
+          - git_ref: 'V_10_0_P2'
+            osp_ver: '10.0p2'
+            SKIP_LTESTS: >-
+              exit-status rekey multiplex forward-control channel-timeout
+              connection-timeout
+    name: ${{ matrix.osp_ver }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    needs: build_wolfssl
+    steps:
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-openssh
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Build and test openssh
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          repository: openssh/openssh-portable
+          ref: ${{ matrix.git_ref }}
+          path: openssh
+          patch-file: $GITHUB_WORKSPACE/osp/openssh-patches/openssh-${{ matrix.osp_ver }}.patch
+          configure: --with-wolfssl=$GITHUB_WORKSPACE/build-dir --with-rpath=-Wl,-rpath=
+          check: false
+
+      # make tests take >20 minutes. Consider limiting?
+      - name: Run tests
+        working-directory: ./openssh
+        run: |
+          make tests SKIP_LTESTS='${{ matrix.SKIP_LTESTS }}'

.github/workflows/opensslcoexist.yml

@@ -0,0 +1,50 @@
+name: OPENSSL_COEXIST and TEST_OPENSSL_COEXIST
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  make_check:
+    strategy:
+      matrix:
+        config: [
+          # Add new configs here
+          '--verbose --enable-all --disable-all-osp --disable-opensslall --enable-opensslcoexist CPPFLAGS="-DNO_WOLFSSL_CIPHER_SUITE_TEST -pedantic -Wdeclaration-after-statement -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE"',
+          '--verbose --enable-all --disable-all-osp --disable-opensslall --enable-opensslcoexist CPPFLAGS="-DNO_WOLFSSL_CIPHER_SUITE_TEST -pedantic -DTEST_OPENSSL_COEXIST -Wdeclaration-after-statement -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE"'
+        ]
+    name: make check
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 6
+    steps:
+      - uses: actions/checkout@v4
+        name: Checkout wolfSSL
+
+      - name: Test --enable-opensslcoexist and TEST_OPENSSL_COEXIST
+        run: |
+          ./autogen.sh || $(exit 2)
+          ./configure ${{ matrix.config }} || $(exit 3)
+          make -j 4 || $(exit 4)
+          make check
+
+      - name: Print errors
+        if: ${{ failure() }}
+        run: |
+          for file in config.log scripts/*.log
+          do
+              if [ -f "$file" ]; then
+                  echo "${file}:"
+                  cat "$file"
+                  echo "========================================================================"
+              fi
+          done

.github/workflows/openvpn.yml

@@ -1,13 +1,25 @@
 name: OpenVPN Tests
 
+# START OF COMMON SECTION
 on:
-  workflow_call:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
 
 jobs:
   build_wolfssl:
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
     steps:
       - name: Build wolfSSL
         uses: wolfSSL/actions-build-autotools-project@v1
@@ -16,28 +28,36 @@ jobs:
           configure: --enable-openvpn
           install: true
 
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
       - name: Upload built lib
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
         with:
           name: wolf-install-openvpn
-          path: build-dir
-          retention-days: 1
+          path: build-dir.tgz
+          retention-days: 5
 
   openvpn_check:
     strategy:
       fail-fast: false
       matrix:
         # List of refs to test
-        ref: [ master, release/2.6, v2.6.0 ]
+        ref: [ release/2.6, master ]
     name: ${{ matrix.ref }}
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 10
     needs: build_wolfssl
     steps:
       - name: Download lib
-        uses: actions/download-artifact@v3
+        uses: actions/download-artifact@v4
         with:
           name: wolf-install-openvpn
-          path: build-dir
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
 
       - name: Install dependencies
         run: |
@@ -46,10 +66,14 @@ jobs:
                      linux-libc-dev man2html libcmocka-dev python3-docutils \
                      libtool automake autoconf libnl-genl-3-dev libnl-genl-3-200
 
+      - name: workaround high-entropy ASLR
+        # not needed after either an update to llvm or runner is done
+        run: sudo sysctl vm.mmap_rnd_bits=28
+
       - if: ${{ matrix.ref != 'master' }}
         name: Build and test openvpn with fsanitize
         run: |
-          echo 'extra_c_flags=CFLAGS="-fsanitize=address -fno-omit-frame-pointer -O2"' >> $GITHUB_ENV
+          echo 'extra_c_flags=CC="gcc -fsanitize=address" CFLAGS="-fno-omit-frame-pointer -O2"' >> $GITHUB_ENV
 
       - name: Build and test openvpn
         uses: wolfSSL/actions-build-autotools-project@v1

.github/workflows/os-check.yml

@@ -1,45 +1,97 @@
 name: Ubuntu-Macos-Windows Tests
 
+# START OF COMMON SECTION
 on:
-  workflow_call:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
 
 jobs:
   make_check:
     strategy:
       fail-fast: false
       matrix:
-        os: [ ubuntu-latest, macos-latest ]
+        os: [ ubuntu-22.04, macos-latest ]
         config: [
           # Add new configs here
           '',
           '--enable-all --enable-asn=template',
           '--enable-all --enable-asn=original',
+          '--enable-all --enable-asn=template CPPFLAGS=-DWOLFSSL_OLD_OID_SUM',
+          '--enable-all --enable-asn=original CPPFLAGS=-DWOLFSSL_OLD_OID_SUM',
           '--enable-harden-tls',
           '--enable-tls13 --enable-session-ticket --enable-dtls --enable-dtls13
-           --enable-opensslextra --enable-sessioncerts 
-           CPPFLAGS=''-DWOLFSSL_DTLS_NO_HVR_ON_RESUME -DHAVE_EXT_CACHE 
-           -DWOLFSSL_TICKET_HAVE_ID -DHAVE_EX_DATA -DSESSION_CACHE_DYNAMIC_MEM'' ',
+             --enable-opensslextra --enable-sessioncerts
+             CPPFLAGS=''-DWOLFSSL_DTLS_NO_HVR_ON_RESUME -DHAVE_EXT_CACHE
+             -DWOLFSSL_TICKET_HAVE_ID -DHAVE_EX_DATA -DSESSION_CACHE_DYNAMIC_MEM'' ',
+          '--enable-all --enable-secure-renegotiation',
+          '--enable-all --enable-haproxy --enable-quic',
+          '--enable-dtls --enable-dtls13 --enable-earlydata
+             --enable-session-ticket --enable-psk
+             CPPFLAGS=''-DWOLFSSL_DTLS13_NO_HRR_ON_RESUME'' ',
+          '--enable-experimental --enable-kyber --enable-dtls --enable-dtls13
+             --enable-dtls-frag-ch',
+          '--enable-all --enable-dtls13 --enable-dtls-frag-ch',
+          '--enable-dtls --enable-dtls13 --enable-dtls-frag-ch
+           --enable-dtls-mtu',
+          '--enable-dtls --enable-dtlscid --enable-dtls13 --enable-secure-renegotiation
+            --enable-psk --enable-aesccm --enable-nullcipher
+            CPPFLAGS=-DWOLFSSL_STATIC_RSA',
+          '--enable-ascon --enable-experimental',
+          '--enable-ascon CPPFLAGS=-DWOLFSSL_ASCON_UNROLL --enable-experimental',
+          '--enable-all CPPFLAGS=''-DNO_AES_192 -DNO_AES_256'' ',
+          '--enable-sniffer --enable-curve25519 --enable-curve448 --enable-enckeys
+            CPPFLAGS=-DWOLFSSL_DH_EXTRA',
+          '--enable-dtls --enable-dtls13 --enable-dtls-frag-ch
+            --enable-dtls-mtu CPPFLAGS=-DWOLFSSL_DTLS_RECORDS_CAN_SPAN_DATAGRAMS',
+          '--enable-opensslall --enable-opensslextra CPPFLAGS=-DWC_RNG_SEED_CB',
+          '--enable-opensslall --enable-opensslextra
+            CPPFLAGS=''-DWC_RNG_SEED_CB -DWOLFSSL_NO_GETPID'' ',
+          '--enable-opensslextra CPPFLAGS=''-DWOLFSSL_NO_CA_NAMES'' ',
+          '--enable-opensslextra=x509small',
+          'CPPFLAGS=''-DWOLFSSL_EXTRA'' ',
+          '--enable-lms=small,verify-only --enable-xmss=small,verify-only',
+          '--disable-sys-ca-certs',
+          '--enable-all CPPFLAGS=-DWOLFSSL_DEBUG_CERTS ',
+          '--enable-all CFLAGS="-DWOLFSSL_CHECK_MEM_ZERO"',
+          '--enable-coding=no',
+          '--enable-dtls --enable-dtls13 --enable-ocspstapling --enable-ocspstapling2
+           --enable-cert-setup-cb --enable-sessioncerts',
+          '--disable-sni --disable-ecc --disable-tls13 --disable-secure-renegotiation-info',
+          'CPPFLAGS=-DWOLFSSL_BLIND_PRIVATE_KEY',
         ]
     name: make check
+    if: github.repository_owner == 'wolfssl'
     runs-on: ${{ matrix.os }}
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 14
     steps:
       - name: Build and test wolfSSL
         uses: wolfSSL/actions-build-autotools-project@v1
         with:
-          configure: ${{ matrix.config }}
+          configure: CFLAGS="-pedantic -Wno-overlength-strings -Wdeclaration-after-statement -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE" ${{ matrix.config }}
           check: true
 
   make_user_settings:
     strategy:
       fail-fast: false
       matrix:
-        os: [ ubuntu-latest, macos-latest ]
+        os: [ ubuntu-22.04, macos-latest ]
         user-settings: [
           # Add new user_settings.h here
           'examples/configs/user_settings_all.h',
         ]
     name: make user_setting.h
+    if: github.repository_owner == 'wolfssl'
     runs-on: ${{ matrix.os }}
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 14
     steps:
       - name: Build and test wolfSSL
         uses: wolfSSL/actions-build-autotools-project@v1
@@ -52,15 +104,21 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        os: [ ubuntu-latest, macos-latest ]
+        os: [ ubuntu-22.04, macos-latest ]
         user-settings: [
           # Add new user_settings.h here
+          'examples/configs/user_settings_eccnonblock.h',
           'examples/configs/user_settings_min_ecc.h',
           'examples/configs/user_settings_wolfboot_keytools.h',
           'examples/configs/user_settings_wolftpm.h',
+          'examples/configs/user_settings_wolfssh.h',
+          'examples/configs/user_settings_tls12.h',
         ]
     name: make user_setting.h (testwolfcrypt only)
+    if: github.repository_owner == 'wolfssl'
     runs-on: ${{ matrix.os }}
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 14
     steps:
       - name: Build and test wolfSSL
         uses: wolfSSL/actions-build-autotools-project@v1
@@ -77,11 +135,14 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        os: [ ubuntu-latest, macos-latest ]
+        os: [ ubuntu-22.04, macos-latest ]
     name: make user_setting.h (with sed)
+    if: github.repository_owner == 'wolfssl'
     runs-on: ${{ matrix.os }}
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 14
     steps:
-    - uses: actions/checkout@v3
+    - uses: actions/checkout@v4
     - if: ${{ matrix.os == 'macos-latest' }}
       run: brew install automake libtool
     - run: ./autogen.sh
@@ -95,7 +156,14 @@ jobs:
 
   windows_build:
     name: Windows Build Test
+    if: github.repository_owner == 'wolfssl'
     runs-on: windows-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        arch: [ x64, Win32, ARM64 ]
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 6
     env:
       # Path to the solution file relative to the root of the project.
       SOLUTION_FILE_PATH: wolfssl64.sln
@@ -104,12 +172,11 @@ jobs:
       # You can convert this to a build matrix if you need coverage of multiple configuration types.
       # https://docs.github.com/actions/learn-github-actions/managing-complex-workflows#using-a-build-matrix
       BUILD_CONFIGURATION: Release
-      BUILD_PLATFORM: x64
     steps:
-    - uses: actions/checkout@v3
+    - uses: actions/checkout@v4
 
     - name: Add MSBuild to PATH
-      uses: microsoft/setup-msbuild@v1
+      uses: microsoft/setup-msbuild@v2
 
     - name: Restore NuGet packages
       working-directory: ${{env.GITHUB_WORKSPACE}}
@@ -119,4 +186,9 @@ jobs:
       working-directory: ${{env.GITHUB_WORKSPACE}}
       # Add additional options to the MSBuild command line here (like platform or verbosity level).
       # See https://docs.microsoft.com/visualstudio/msbuild/msbuild-command-line-reference
-      run: msbuild /m /p:PlatformToolset=v142 /p:Platform=${{env.BUILD_PLATFORM}} /p:Configuration=${{env.BUILD_CONFIGURATION}} ${{env.SOLUTION_FILE_PATH}}
+      run: msbuild /m /p:PlatformToolset=v142 /p:Platform=${{matrix.arch}} /p:Configuration=${{env.BUILD_CONFIGURATION}} ${{env.SOLUTION_FILE_PATH}}
+
+    - if: ${{ matrix.arch != 'ARM64' }}
+      name: Run Test
+      working-directory: ${{env.GITHUB_WORKSPACE}}
+      run: Release/${{matrix.arch}}/testsuite.exe

.github/workflows/packaging.yml

@@ -0,0 +1,57 @@
+name: Packaging Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Package wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 10
+    steps:
+      - name: Checkout wolfSSL
+        uses: actions/checkout@v4
+
+      - name: Configure wolfSSL
+        run: |
+          autoreconf -ivf
+          ./configure --enable-distro --enable-all \
+            --disable-openssl-compatible-defaults --enable-intelasm \
+            --enable-dtls13 --enable-dtls-mtu \
+            --enable-sp-asm --disable-examples --disable-silent-rules
+
+      - name: Make sure OPENSSL_COMPATIBLE_DEFAULTS is not present in options.h
+        run: |
+          ! grep OPENSSL_COMPATIBLE_DEFAULTS wolfssl/options.h
+
+      - name: Build wolfSSL .deb
+        run: make deb-docker
+
+# disabled 20240919 -- broken target.
+#      - name: Build wolfSSL .rpm
+#        run: make rpm-docker
+
+      - name: Confirm packages built
+        run: |
+          DEB_COUNT=$(find -name 'libwolfssl*.deb' | wc -l)
+          if [ "$DEB_COUNT" != "3" ]; then
+            echo Did not find exactly three deb packages!!!
+            exit 1
+          fi
+# disabled 20240919 -- broken target.
+#          RPM_COUNT=$(find -name 'wolfssl*.rpm' | wc -l)
+#          if [ "$RPM_COUNT" != "4" ]; then
+#            echo Did not find exactly four rpm packages!!!
+#            exit 1
+#          fi

.github/workflows/pam-ipmi.yml

@@ -0,0 +1,92 @@
+name: pam-ipmi Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-all
+          install: true
+          # Don't run tests as this config is tested in many other places
+          check: false
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-pam-ipmi
+          path: build-dir.tgz
+          retention-days: 5
+
+  build_pam-ipmi:
+    strategy:
+      fail-fast: false
+      matrix:
+        git_ref: [ e4b13e6725abb178f62ee897fe1c0e81b06a9431 ]
+    name: ${{ matrix.git_ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    needs: build_wolfssl
+    steps:
+      - name: Install dependencies
+        run: |
+          # Don't prompt for anything
+          export DEBIAN_FRONTEND=noninteractive
+          sudo apt-get update
+          sudo apt-get install libpam-dev ninja-build meson
+
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-pam-ipmi
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Checkout pam-ipmi
+        uses: actions/checkout@v4
+        with:
+          repository: openbmc/pam-ipmi
+          path: pam-ipmi
+          ref: ${{ matrix.git_ref }}
+
+      - name: Build pam-ipmi
+        working-directory: pam-ipmi
+        run: |
+          patch -p1 < ../osp/pam-ipmi/*-${{ matrix.git_ref }}.patch
+          PKG_CONFIG_PATH=$GITHUB_WORKSPACE/build-dir/lib/pkgconfig meson setup build
+          ninja -C build
+
+      - name: Confirm built with wolfSSL
+        working-directory: pam-ipmi
+        run: |
+          ldd ./build/src/pam_ipmisave/pam_ipmisave.so | grep wolfssl

.github/workflows/pq-all.yml

@@ -0,0 +1,52 @@
+name: Quantum Resistant Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  make_check:
+    strategy:
+      matrix:
+        config: [
+          # Add new configs here
+          '--enable-intelasm --enable-sp-asm --enable-mlkem=yes,kyber,ml-kem CPPFLAGS="-DWOLFSSL_ML_KEM_USE_OLD_IDS"',
+          '--enable-intelasm --enable-sp-asm --enable-all --enable-testcert --enable-acert --enable-dtls13 --enable-dtls-mtu --enable-dtls-frag-ch --enable-dtlscid --enable-quic --with-sys-crypto-policy --enable-experimental --enable-kyber=yes,original --enable-lms --enable-xmss --enable-dilithium --enable-dual-alg-certs --disable-qt CPPFLAGS="-pedantic -Wdeclaration-after-statement -DWOLFCRYPT_TEST_LINT -DNO_WOLFSSL_CIPHER_SUITE_TEST -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE"',
+          '--enable-smallstack --enable-smallstackcache --enable-intelasm --enable-sp-asm --enable-all --enable-testcert --enable-acert --enable-dtls13 --enable-dtls-mtu --enable-dtls-frag-ch --enable-dtlscid --enable-quic --with-sys-crypto-policy --enable-experimental --enable-kyber=yes,original --enable-lms --enable-xmss --enable-dilithium --enable-dual-alg-certs --disable-qt CPPFLAGS="-pedantic -Wdeclaration-after-statement -DWOLFCRYPT_TEST_LINT -DNO_WOLFSSL_CIPHER_SUITE_TEST -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE"',
+          '--enable-intelasm --enable-sp-asm --enable-all --enable-testcert --enable-acert --enable-dtls13 --enable-dtls-mtu --enable-dtls-frag-ch --enable-dtlscid --enable-quic --with-sys-crypto-policy --enable-experimental --enable-kyber=yes,original --enable-lms --enable-xmss --enable-dilithium --enable-dual-alg-certs --disable-qt CPPFLAGS="-Wdeclaration-after-statement -DWOLFCRYPT_TEST_LINT -DNO_WOLFSSL_CIPHER_SUITE_TEST -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE" CC=c++'
+        ]
+    name: make check
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 6
+    steps:
+      - uses: actions/checkout@v4
+        name: Checkout wolfSSL
+
+      - name: Test wolfSSL
+        run: |
+          ./autogen.sh
+          ./configure ${{ matrix.config }}
+          make -j 4
+          make check
+
+      - name: Print errors
+        if: ${{ failure() }}
+        run: |
+          for file in scripts/*.log
+          do
+              if [ -f "$file" ]; then
+                  echo "${file}:"
+                  cat "$file"
+                  echo "========================================================================"
+              fi
+          done

.github/workflows/psk.yml

@@ -0,0 +1,51 @@
+name: PSK Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  make_check:
+    strategy:
+      matrix:
+        config: [
+          # Add new configs here
+          '--enable-psk C_EXTRA_FLAGS=-DWOLFSSL_STATIC_PSK --disable-rsa --disable-ecc --disable-dh',
+          '--disable-oldtls --disable-tls13 --enable-psk -disable-rsa --disable-dh -disable-ecc --disable-asn C_EXTRA_FLAGS=-DWOLFSSL_STATIC_PSK --enable-lowresource --enable-singlethreaded --disable-asm --disable-errorstrings --disable-pkcs12 --disable-sha3 --disable-sha224 --disable-sha384 --disable-sha512 --disable-sha --disable-md5 -disable-aescbc --disable-chacha --disable-poly1305 --disable-coding --disable-sp-math-all',
+          '--disable-oldtls --disable-tlsv12 --enable-tls13 --enable-psk -disable-rsa --disable-dh -disable-ecc --disable-asn C_EXTRA_FLAGS=-DWOLFSSL_STATIC_PSK --enable-lowresource --enable-singlethreaded --disable-asm --disable-errorstrings --disable-pkcs12 --disable-sha3 --disable-sha224 --disable-sha384 --disable-sha512 --disable-sha --disable-md5 -disable-aescbc --disable-chacha --disable-poly1305 --disable-coding --disable-sp-math-all'
+        ]
+    name: make check
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 6
+    steps:
+      - uses: actions/checkout@v4
+        name: Checkout wolfSSL
+
+      - name: Test wolfSSL
+        run: |
+          ./autogen.sh
+          ./configure ${{ matrix.config }}
+          make -j 4
+          make check
+
+      - name: Print errors
+        if: ${{ failure() }}
+        run: |
+          for file in scripts/*.log
+          do
+              if [ -f "$file" ]; then
+                  echo "${file}:"
+                  cat "$file"
+                  echo "========================================================================"
+              fi
+          done

.github/workflows/rng-tools.yml

@@ -0,0 +1,116 @@
+name: rng-tools Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-all
+          install: true
+          check: false
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-rng-tools
+          path: build-dir.tgz
+          retention-days: 5
+
+  rng-tools_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        # List of releases to test
+        ref: [ 6.16 ]
+    name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    needs: build_wolfssl
+    steps:
+      - name: Install dependencies
+        run: |
+          # Don't prompt for anything
+          export DEBIAN_FRONTEND=noninteractive
+          sudo apt-get update
+          sudo apt-get install -y libcurl4-openssl-dev libjansson-dev libp11-dev librtlsdr-dev libcap-dev
+
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-rng-tools
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Checkout jitterentropy-library
+        uses: actions/checkout@v4
+        with:
+          repository: smuellerDD/jitterentropy-library
+          path: jitterentropy-library
+          ref: v3.5.0
+
+      - name: Build jitterentropy-library
+        working-directory: jitterentropy-library
+        run: make -j
+
+      - name: Build rng-tools
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          repository: nhorman/rng-tools
+          ref: v${{ matrix.ref }}
+          path: rng-tools
+          patch-file: $GITHUB_WORKSPACE/osp/rng-tools/${{ matrix.ref }}.patch
+          configure: --without-pkcs11 --enable-jitterentropy=$GITHUB_WORKSPACE/jitterentropy-library --with-wolfssl=$GITHUB_WORKSPACE/build-dir
+          check: false
+
+      - name: Testing rng-tools
+        id: testing
+        working-directory: rng-tools
+        run: |
+          # Retry up to five times
+          for i in {1..5}; do
+            TEST_RES=0
+            LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$GITHUB_WORKSPACE/build-dir/lib make check || TEST_RES=$?
+            if [ "$TEST_RES" -eq "0" ]; then
+               break
+            fi
+          done
+          if [ "$TEST_RES" -ne "0" ]; then
+            exit $TEST_RES
+          fi
+
+      - name: Print logs
+        if: ${{ failure() && steps.testing.outcome == 'failure' }}
+        working-directory: rng-tools/tests
+        run: cat test-suite.log

.github/workflows/rust-wrapper.yml

@@ -0,0 +1,33 @@
+name: Build Rust Wrapper
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL Rust Wrapper
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-24.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 10
+    steps:
+    - name: Build wolfSSL
+      uses: wolfSSL/actions-build-autotools-project@v1
+      with:
+        path: wolfssl
+        configure: --enable-all
+    - name: Build Rust Wrapper
+      working-directory: wolfssl
+      run: make -C wrapper/rust
+    - name: Run Rust Wrapper Tests
+      working-directory: wolfssl
+      run: make -C wrapper/rust test

.github/workflows/smallStackSize.yml

@@ -0,0 +1,53 @@
+name: Stack Size warnings
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_library:
+    strategy:
+      matrix:
+        config: [
+          # defaults, noasm
+          '--disable-asm',
+
+          # defaults + native PQ, no asm
+          '--disable-asm --enable-experimental --enable-kyber=yes,original --enable-lms --enable-xmss --enable-dilithium',
+
+          # all-crypto + native PQ, no asm
+          '--disable-asm --enable-all-crypto --enable-experimental --enable-kyber=yes,original --enable-lms --enable-xmss --enable-dilithium',
+
+          # defaults, intelasm + sp-asm
+          '--enable-intelasm --enable-sp-asm',
+
+          # defaults + native PQ, intelasm + sp-asm
+          '--enable-intelasm --enable-sp-asm --enable-experimental --enable-kyber=yes,original --enable-lms --enable-xmss --enable-dilithium',
+
+          # all-crypto + native PQ, intelasm + sp-asm
+          '--enable-intelasm --enable-sp-asm --enable-all-crypto --enable-experimental --enable-kyber=yes,original --enable-lms --enable-xmss --enable-dilithium'
+        ]
+    name: build library
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 6
+    steps:
+      - uses: actions/checkout@v4
+        name: Checkout wolfSSL
+
+      - name: Build wolfCrypt with smallstack and stack depth warnings, and run testwolfcrypt
+        run: |
+          ./autogen.sh || $(exit 2)
+          echo "running ./configure ... ${{ matrix.config }}"
+          ./configure --enable-cryptonly --disable-cryptocb --disable-testcert --enable-smallstack --enable-smallstackcache --enable-crypttests --disable-benchmark --disable-examples --with-max-rsa-bits=16384 --enable-stacksize=verbose CFLAGS="-Wframe-larger-than=2048 -Wstack-usage=4096 -DWOLFSSL_TEST_MAX_RELATIVE_STACK_BYTES=8192 -DTEST_ALWAYS_RUN_TO_END" ${{ matrix.config }} || $(exit 3)
+          make -j 4 || $(exit 4)
+          ./wolfcrypt/test/testwolfcrypt

.github/workflows/socat.yml

@@ -0,0 +1,81 @@
+name: socat Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-maxfragment --enable-opensslall --enable-opensslextra --enable-dtls --enable-oldtls --enable-tlsv10 --enable-ipv6 'CPPFLAGS=-DWOLFSSL_NO_DTLS_SIZE_CHECK -DOPENSSL_COMPATIBLE_DEFAULTS'
+          install: true
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-socat
+          path: build-dir.tgz
+          retention-days: 5
+
+
+  socat_check:
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 30
+    needs: build_wolfssl
+    steps:
+      - name: Install prereqs
+        run:
+          sudo apt-get install build-essential autoconf libtool pkg-config clang libc++-dev
+
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-socat
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Download socat
+        run: curl -O http://www.dest-unreach.org/socat/download/socat-1.8.0.0.tar.gz && tar xvf socat-1.8.0.0.tar.gz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Build socat
+        working-directory: ./socat-1.8.0.0
+        run: |
+          patch -p1 < ../osp/socat/1.8.0.0/socat-1.8.0.0.patch
+          autoreconf -vfi
+          ./configure --with-wolfssl=$GITHUB_WORKSPACE/build-dir --enable-default-ipv=4
+          make
+
+      - name: Run socat tests
+        working-directory: ./socat-1.8.0.0
+        run: |
+          export LD_LIBRARY_PATH=$GITHUB_WORKSPACE/build-dir/lib:$LD_LIBRARY_PATH
+          export SHELL=/bin/bash
+          SOCAT=$GITHUB_WORKSPACE/socat-1.8.0.0/socat ./test.sh -t 0.5 --expect-fail 36,64,146,214,216,217,309,310,386,399,402,403,459,460,467,468,475,478,492,528,530

.github/workflows/softhsm.yml

@@ -0,0 +1,94 @@
+name: SoftHSMv2 Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 10
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-all CFLAGS=-DRSA_MIN_SIZE=1024
+          install: true
+          check: false
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-softhsm
+          path: build-dir.tgz
+          retention-days: 5
+
+  softhsm_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        # List of releases to test
+        ref: [ 2.6.1 ]
+    name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 20
+    needs: build_wolfssl
+    steps:
+      - name: Install dependencies
+        run: |
+          # Don't prompt for anything
+          export DEBIAN_FRONTEND=noninteractive
+          sudo apt-get update
+          sudo apt-get install -y libcppunit-dev
+
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-softhsm
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Checkout SoftHSMv2
+        uses: actions/checkout@v4
+        with:
+          repository: opendnssec/SoftHSMv2
+          path: softhsm
+          ref: ${{ matrix.ref }}
+
+      # Not using wolfSSL/actions-build-autotools-project@v1 because autogen.sh doesn't work
+      - name: Build softhsm
+        working-directory: softhsm
+        run: |
+          patch -p1 < $GITHUB_WORKSPACE/osp/softhsm/${{ matrix.ref }}.patch
+          autoreconf -if
+          ./configure --with-crypto-backend=wolfssl WOLFSSL_INSTALL_DIR=$GITHUB_WORKSPACE/build-dir
+          make -j
+
+      - name: Test softhsm
+        working-directory: softhsm
+        run: make -j check

.github/workflows/sssd.yml

@@ -0,0 +1,99 @@
+name: sssd Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    if: github.repository_owner == 'wolfssl'
+    name: Build wolfSSL
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-all CFLAGS=-DWOLFSSL_NO_ASN_STRICT
+          install: true
+          check: false
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-sssd
+          path: build-dir.tgz
+          retention-days: 5
+
+  sssd_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        # List of releases to test
+        ref: [ 2.9.1 ]
+    name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    container:
+      image: quay.io/sssd/ci-client-devel:ubuntu-latest
+      env:
+        LD_LIBRARY_PATH: /usr/local/lib
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 20
+    needs: build_wolfssl
+    steps:
+      - name: Install dependencies
+        run: |
+          # Don't prompt for anything
+          export DEBIAN_FRONTEND=noninteractive
+          sudo apt-get update
+          sudo apt-get install -y build-essential autoconf libldb-dev libldb2 python3-ldb bc
+
+      - name: Setup env
+        run: |
+          ln -s samba-4.0/ldb.h /usr/include/ldb.h
+          ln -s samba-4.0/ldb_errors.h /usr/include/ldb_errors.h
+          ln -s samba-4.0/ldb_handlers.h /usr/include/ldb_handlers.h
+          ln -s samba-4.0/ldb_module.h /usr/include/ldb_module.h
+          ln -s samba-4.0/ldb_version.h /usr/include/ldb_version.h
+
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-sssd
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Build and test sssd
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          repository: SSSD/sssd
+          ref: ${{ matrix.ref }}
+          path: sssd
+          patch-file: $GITHUB_WORKSPACE/osp/sssd/${{ matrix.ref }}.patch
+          configure: >-
+            --without-samba --without-nfsv4-idmapd-plugin --with-oidc-child=no
+            --without-manpages WOLFSSL_INSTALL_DIR=$GITHUB_WORKSPACE/build-dir
+          check: true
+

.github/workflows/stunnel.yml

@@ -1,13 +1,25 @@
 name: stunnel Tests
 
+# START OF COMMON SECTION
 on:
-  workflow_call:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
 
 jobs:
   build_wolfssl:
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
     steps:
       - name: Build wolfSSL
         uses: wolfSSL/actions-build-autotools-project@v1
@@ -16,12 +28,15 @@ jobs:
           configure: --enable-stunnel
           install: true
 
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
       - name: Upload built lib
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
         with:
           name: wolf-install-stunnel
-          path: build-dir
-          retention-days: 1
+          path: build-dir.tgz
+          retention-days: 5
 
   stunnel_check:
     strategy:
@@ -30,17 +45,22 @@ jobs:
         # List of releases to test
         ref: [ 5.67 ]
     name: ${{ matrix.ref }}
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
     needs: build_wolfssl
     steps:
       - name: Download lib
-        uses: actions/download-artifact@v3
+        uses: actions/download-artifact@v4
         with:
           name: wolf-install-stunnel
-          path: build-dir
-    
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
       - name: Checkout OSP
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
         with:
           repository: wolfssl/osp
           path: osp

.github/workflows/symbol-prefixes.yml

@@ -0,0 +1,70 @@
+name: WOLFSSL_API_PREFIX_MAP
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  make_and_analyze:
+    strategy:
+      matrix:
+        config: [
+          '--enable-all --enable-mlkem --enable-mldsa --enable-xmss --enable-lms --enable-acert --with-sys-crypto-policy CFLAGS=-DWOLFSSL_API_PREFIX_MAP'
+        ]
+    name: make and analyze
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 6
+    steps:
+      - uses: actions/checkout@v4
+        name: Checkout wolfSSL
+
+      - name: Test --enable-opensslcoexist and TEST_OPENSSL_COEXIST
+        run: |
+          ./autogen.sh || $(exit 2)
+          ./configure ${{ matrix.config }} || $(exit 3)
+          make -j 4 || $(exit 4)
+          # ignore properly prefixed symbols, and symbols associated with asm implementations (all internal) regardless of prefix:
+          readelf --symbols --wide src/.libs/libwolfssl.so | \
+          awk '
+          BEGIN {
+              total_public_symbols = 0;
+              unprefixed_public_symbols = 0;
+          }
+          {
+              if (($5 == "GLOBAL") && ($6 != "HIDDEN") && ($7 ~ /^[0-9]+$/)) {
+                  ++total_public_symbols;
+              }
+          }
+          {
+              if (($7 !~ /^[0-9]+$/) ||
+                  ($8 ~ /^(wc_|wolf|WOLF|__pfx|fe_|sp_[a-zA-Z090-0_]*[0-9])/) ||
+                  ($8 ~ /(_avx[12]|_AVX[12]|_sse[12]|_SSE[12]|_aesni|_AESNI|_bmi2|_x64$)/))
+              {
+                  next;
+              }
+          }
+          {
+              if (($4 == "FUNC") && ($5 == "GLOBAL") && ($6 == "DEFAULT")) {
+                  ++unprefixed_public_symbols;
+                  print;
+              }
+          }
+          END {
+              if (unprefixed_public_symbols) {
+                  print unprefixed_public_symbols " unprefixed public symbols found, of " total_public_symbols " total." >"/dev/stderr";
+                  exit(1);
+              } else {
+                  print total_public_symbols " public symbols found in libwolfssl, all OK.";
+                  exit(0);
+              }
+          }' || $(exit 5)

.github/workflows/threadx.yml

@@ -0,0 +1,57 @@
+name: ThreadXBuild Test
+
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+jobs:
+  build:
+
+    runs-on: ubuntu-22.04
+    timeout-minutes: 10
+
+    steps:
+    - name: Cache NetXDuo bundle
+      id: cache-netxduo
+      uses: actions/cache@v3
+      with:
+        path: ./v6.4.3_rel.tar.gz
+        key: netxduo-bundle-v6.4.3_rel
+
+    - name: Download NetXDuo bundle if not cached
+      if: steps.cache-netxduo.outputs.cache-hit != 'true'
+      run: |
+        wget https://github.com/eclipse-threadx/netxduo/archive/refs/tags/v6.4.3_rel.tar.gz
+
+    - name: Extract NetXDuo bundle
+      run: |
+        mkdir -p netxduo_src
+        tar -xzf v6.4.3_rel.tar.gz -C netxduo_src --strip-components=1
+
+    - name: Install NetXDuo Dependencies
+      working-directory: ./netxduo_src
+      run: |
+        ./scripts/install.sh
+
+    - name: Configure NetX with DNS Client Support
+      working-directory: ./netxduo_src
+      run: |
+        cp addons/dns/nxd_dns.h ./common/inc/
+        cp addons/dns/nxd_dns.c ./common/src/
+
+    - name: Build NetXDuo with DNS Support
+      working-directory: ./netxduo_src
+      run: |
+        rm -rf test/cmake/threadx
+        rm -rf test/cmake/filex
+        ./scripts/build_nxd64.sh
+
+    - name: Build wolfSSL
+      uses: wolfSSL/actions-build-autotools-project@v1
+      with:
+        path: wolfssl
+        configure: --enable-enckeys --disable-examples --disable-benchmark --disable-crypttests CPPFLAGS="-DTHREADX -DHAVE_NETX -DWOLFSSL_USER_IO -I${{ github.workspace }}/netxduo_src/common/inc -I${{ github.workspace }}/netxduo_src/ports/linux/gnu/inc -I${{ github.workspace }}/netxduo_src/test/cmake/netxduo64/build/libs/inc" LDFLAGS="-L${{ github.workspace }}/netxduo_src/test/cmake/netxduo64/build/default_build_coverage/netxduo -L${{ github.workspace }}/netxduo_src/test/cmake/netxduo64/build/libs/threadx"  LIBS="-lnetxduo -lthreadx"
+        install: false
+

.github/workflows/watcomc.yml

@@ -0,0 +1,88 @@
+name: Build Watcom C
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  wolfssl_watcomc_windows:
+    if: github.repository_owner == 'wolfssl'
+    strategy:
+      fail-fast: false
+      matrix:
+        common:
+          - cmake:    '-G "Watcom WMake" -DCMAKE_VERBOSE_MAKEFILE=TRUE -DWOLFSSL_ASM=no -DWOLFSSL_EXAMPLES=no -DWOLFSSL_CRYPT_TESTS=no'
+        platform:
+          - title:   'Windows OW 2.0'
+            system:   'Windows'
+            image:    'windows-latest'
+            owimage:  '2.0'
+            id:       'win32ow20'
+            cmake:    '-DCMAKE_SYSTEM_NAME=Windows -DCMAKE_SYSTEM_PROCESSOR=x86'
+          - title:   'Linux OW 2.0'
+            system:   'Linux'
+            image:    'ubuntu-latest'
+            owimage:  '2.0'
+            id:       'linuxow20'
+            cmake:    '-DCMAKE_SYSTEM_NAME=Linux -DCMAKE_SYSTEM_PROCESSOR=x86'
+          - title:   'OS/2 OW 2.0'
+            system:   'OS2'
+            image:    'windows-latest'
+            owimage:  '2.0'
+            id:       'os2ow20'
+            cmake:    '-DCMAKE_SYSTEM_NAME=OS2 -DCMAKE_SYSTEM_PROCESSOR=x86'
+        thread:
+          - id:       'multi'
+            cmake:    ''
+            owcmake:  '-DCMAKE_POLICY_DEFAULT_CMP0136=NEW -DCMAKE_WATCOM_RUNTIME_LIBRARY=MultiThreaded'
+          - id:       'single'
+            cmake:    '-DWOLFSSL_SINGLE_THREADED=yes'
+            owcmake:  '-DCMAKE_POLICY_DEFAULT_CMP0136=NEW -DCMAKE_WATCOM_RUNTIME_LIBRARY=SingleThreaded'
+        library:
+          - id:       'dll'
+            cmake:    ''
+            owcmake:  'DLL'
+          - id:       'static'
+            cmake:    '-DBUILD_SHARED_LIBS=no'
+            owcmake:  ''
+        exclude:
+          - { platform: { system: 'Linux' }, library: { id: 'dll' } }
+    runs-on: ${{ matrix.platform.image }}
+    name: ${{ matrix.platform.title }} (${{ matrix.thread.id }} ${{ matrix.library.id }})
+    steps:
+      - name: Setup Open Watcom ${{ matrix.platform.owimage }}
+        uses: open-watcom/setup-watcom@v0
+        with:
+          version: ${{ matrix.platform.owimage }}
+          # Currently fixed to a monthly build because of historical instability with daily releases.
+          # See https://github.com/wolfSSL/wolfssl/pull/9167
+          # Pin to monthly release as needed:
+          tag: 2025-11-03-Build
+
+      - name: Checkout wolfSSL
+        uses: actions/checkout@v4
+        with:
+          path: wolfssl
+
+      - name: Build wolfSSL
+        working-directory: wolfssl
+        shell: bash
+        run: |
+          cmake -B build ${{matrix.common.cmake}} ${{ matrix.platform.cmake }} ${{ matrix.thread.cmake }} ${{ matrix.library.cmake }} ${{ matrix.thread.owcmake }}${{ matrix.library.owcmake }}
+          cmake --build build
+
+      - name: Upload build errors
+        if: failure()
+        uses: actions/upload-artifact@v4
+        with:
+          name: ${{ matrix.platform.id }}-${{ matrix.thread.id }}-${{ matrix.library.id }}
+          path: |
+            build/**

.github/workflows/win-csharp-test.yml

@@ -0,0 +1,58 @@
+name: Windows CSharp Build Test
+
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+jobs:
+  build:
+
+    if: github.repository_owner == 'wolfssl'
+    runs-on: windows-latest
+
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 6
+
+    env:
+      # Path to the solution file relative to the root of the project.
+      SOLUTION_FILE_PATH: wolfssl\wrapper\CSharp\wolfSSL_CSharp.sln
+
+      # Configuration type to build.
+      # You can convert this to a build matrix if you need coverage of multiple configuration types.
+      # https://docs.github.com/actions/learn-github-actions/managing-complex-workflows#using-a-build-matrix
+      BUILD_CONFIGURATION: Debug
+      BUILD_PLATFORM: x64
+
+    steps:
+        - name: Pull wolfssl
+          uses: actions/checkout@master
+          with:
+            repository: wolfssl/wolfssl
+            path: wolfssl
+
+        - name: Create FIPS stub files (autogen)
+          working-directory: wolfssl
+          run: |
+            echo $null >> wolfcrypt\src\fips.c
+            echo $null >> wolfcrypt\src\fips_test.c
+            echo $null >> wolfcrypt\src\wolfcrypt_first.c
+            echo $null >> wolfcrypt\src\wolfcrypt_last.c
+
+        - name: Add MSBuild to PATH
+          uses: microsoft/setup-msbuild@v1
+
+        - name: Build
+          working-directory: ${{env.GITHUB_WORKSPACE}}
+          # Add additional options to the MSBuild command line here (like platform or verbosity level).
+          # See https://docs.microsoft.com/visualstudio/msbuild/msbuild-command-line-reference
+          run: msbuild /m /p:PlatformToolset=v142 /p:Platform=${{env.BUILD_PLATFORM}} /p:Configuration=${{env.BUILD_CONFIGURATION}} ${{env.SOLUTION_FILE_PATH}}
+
+        - name: Run wolfCrypt test
+          working-directory: ${{env.GITHUB_WORKSPACE}}wolfssl\wrapper\CSharp\Debug\x64\
+          run: ./wolfCrypt-test.exe
+
+        - name: Run wolfSSL client/server example
+          working-directory: ${{env.GITHUB_WORKSPACE}}wolfssl\wrapper\CSharp\Debug\x64\
+          run: ./wolfSSL-TLS-Server.exe && sleep 1 & ./wolfSSL-TLS-Client.exe

.github/workflows/wolfCrypt-Wconversion.yml

@@ -0,0 +1,48 @@
+name: wolfCrypt conversion warnings
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_library:
+    strategy:
+      matrix:
+        config: [
+          # Add new configs here
+          '--disable-asm --enable-cryptonly --enable-all-crypto --disable-examples --disable-benchmark --disable-crypttests CPPFLAGS="-Wconversion -Warith-conversion -Wenum-conversion -Wfloat-conversion -Wsign-conversion"',
+          '--enable-intelasm --enable-cryptonly --enable-all-crypto --disable-examples --disable-benchmark --disable-crypttests CPPFLAGS="-Wconversion -Warith-conversion -Wenum-conversion -Wfloat-conversion -Wsign-conversion"',
+          '--enable-smallstack --disable-asm --enable-cryptonly --enable-all-crypto --disable-examples --disable-benchmark --disable-crypttests CPPFLAGS="-Wconversion -Warith-conversion -Wenum-conversion -Wfloat-conversion -Wsign-conversion"',
+          '--enable-smallstack --enable-intelasm --enable-cryptonly --enable-all-crypto --disable-examples --disable-benchmark --disable-crypttests CPPFLAGS="-Wconversion -Warith-conversion -Wenum-conversion -Wfloat-conversion -Wsign-conversion"',
+          '--enable-cryptonly --enable-all-crypto --disable-examples --disable-benchmark --disable-crypttests CPPFLAGS="-Wconversion -Warith-conversion -Wenum-conversion -Wfloat-conversion -Wsign-conversion -DNO_INT128"',
+          '--enable-cryptonly --enable-all-crypto --disable-examples --disable-benchmark --disable-crypttests CPPFLAGS="-Wdeclaration-after-statement -Wconversion -Warith-conversion -Wenum-conversion -Wfloat-conversion -Wsign-conversion" --enable-32bit CFLAGS=-m32'
+        ]
+    name: build library
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 6
+    steps:
+      - uses: actions/checkout@v4
+        name: Checkout wolfSSL
+
+      - name: install_multilib
+        run: |
+          export DEBIAN_FRONTEND=noninteractive
+          sudo apt-get update
+          sudo apt-get install -y gcc-multilib
+
+      - name: Build wolfCrypt with extra type conversion warnings
+        run: |
+          ./autogen.sh || $(exit 2)
+          echo "running ./configure ${{ matrix.config }}"
+          ./configure ${{ matrix.config }} || $(exit 3)
+          make -j 4 || $(exit 4)

.github/workflows/zephyr.yml

@@ -0,0 +1,134 @@
+name: Zephyr tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  run_test:
+    name: Build and run
+    strategy:
+      fail-fast: false
+      matrix:
+        config:
+          - zephyr-ref: v3.4.0
+            zephyr-sdk: 0.16.1
+          - zephyr-ref: v3.5.0
+            zephyr-sdk: 0.16.3
+          - zephyr-ref: v2.7.4
+            zephyr-sdk: 0.16.3
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 25
+    steps:
+      - name: Install dependencies
+        run: |
+          # Don't prompt for anything
+          export DEBIAN_FRONTEND=noninteractive
+          sudo apt-get update
+          # most of the ci-base zephyr docker image packages
+          sudo apt-get install -y zip bridge-utils uml-utilities \
+            git cmake ninja-build gperf ccache dfu-util device-tree-compiler wget \
+            python3-dev python3-pip python3-setuptools python3-tk python3-wheel xz-utils file \
+            make gcc gcc-multilib g++-multilib libsdl2-dev libmagic1 \
+            autoconf automake bison build-essential ca-certificates cargo ccache chrpath cmake \
+            cpio device-tree-compiler dfu-util diffstat dos2unix doxygen file flex g++ gawk gcc \
+            gcovr git git-core gnupg gperf gtk-sharp2 help2man iproute2 lcov libcairo2-dev \
+            libglib2.0-dev libgtk2.0-0 liblocale-gettext-perl libncurses5-dev libpcap-dev \
+            libpopt0 libsdl1.2-dev libsdl2-dev libssl-dev libtool libtool-bin locales make \
+            net-tools ninja-build openssh-client parallel pkg-config python3-dev python3-pip \
+            python3-ply python3-setuptools python-is-python3 qemu-kvm rsync socat srecord sudo \
+            texinfo unzip wget ovmf xz-utils
+
+      - name: Setup cmake version
+        uses: jwlawson/actions-setup-cmake@v2
+        with:
+          cmake-version: '3.25.x'
+
+      - name: Install west
+        run: sudo pip install west
+
+      - name: Init west workspace
+        run: west init --mr ${{ matrix.config.zephyr-ref }} zephyr
+
+      - name: Update west.yml
+        working-directory: zephyr/zephyr
+        run: |
+          REF=$(echo '${{ github.ref }}' | sed -e 's/\//\\\//g')
+          sed -e 's/remotes:/remotes:\n    \- name: wolfssl\n      url\-base: https:\/\/github.com\/${{ github.repository_owner }}/' -i west.yml
+          sed -e "s/projects:/projects:\n    \- name: wolfssl\n      path: modules\/crypto\/wolfssl\n      remote: wolfssl\n      revision: $REF/" -i west.yml
+
+      - name: Update west workspace
+        working-directory: zephyr
+        run: west update -n -o=--depth=1
+
+      - name: Export zephyr
+        working-directory: zephyr
+        run: west zephyr-export
+
+      - name: Install pip dependencies
+        working-directory: zephyr
+        run: sudo pip install -r zephyr/scripts/requirements.txt
+
+      - name: Install zephyr SDK
+        run: |
+          wget -q https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v${{ matrix.config.zephyr-sdk }}/zephyr-sdk-${{ matrix.config.zephyr-sdk }}_linux-x86_64_minimal.tar.xz
+          tar xf zephyr-sdk-${{ matrix.config.zephyr-sdk }}_linux-x86_64_minimal.tar.xz
+          cd zephyr-sdk-${{ matrix.config.zephyr-sdk }}
+          ./setup.sh -h -c -t x86_64-zephyr-elf
+
+      - name: Fix options for 2.7.4
+        if: ${{ matrix.config.zephyr-ref == 'v2.7.4' }}
+        working-directory: zephyr/modules/crypto/wolfssl
+        run: |
+          sed -i -e 's/CONFIG_COMMON_LIBC_MALLOC_ARENA_SIZE/CONFIG_MINIMAL_LIBC_MALLOC_ARENA_SIZE/g' $(find -name prj.conf)
+
+      - name: Run wolfssl test
+        id: wolfssl-test
+        working-directory: zephyr
+        run: |
+          ./zephyr/scripts/twister -T modules/crypto/wolfssl --test zephyr/samples/wolfssl_test/sample.crypto.wolfssl_test -vvv
+          rm -rf zephyr/twister-out
+          ./zephyr/scripts/twister -T modules/crypto/wolfssl --test zephyr/samples/wolfssl_test/sample.crypto.wolfssl_test_no_malloc -vvv
+          rm -rf zephyr/twister-out
+
+      - name: Run wolfssl TLS sock test
+        # Results in a page fault that I can't trace
+        if: ${{ matrix.config.zephyr-ref != 'v2.7.4' }}
+        id: wolfssl-tls-sock
+        working-directory: zephyr
+        run: |
+          ./zephyr/scripts/twister -T modules/crypto/wolfssl --test zephyr/samples/wolfssl_tls_sock/sample.crypto.wolfssl_tls_sock -vvv
+          rm -rf zephyr/twister-out
+          ./zephyr/scripts/twister -T modules/crypto/wolfssl --test zephyr/samples/wolfssl_tls_sock/sample.crypto.wolfssl_tls_sock_no_malloc -vvv
+          rm -rf zephyr/twister-out
+
+      - name: Run wolfssl TLS thread test
+        if: ${{ matrix.config.zephyr-ref != 'v2.7.4' }}
+        id: wolfssl-tls-thread
+        working-directory: zephyr
+        run: |
+          ./zephyr/scripts/twister -T modules/crypto/wolfssl --test zephyr/samples/wolfssl_tls_thread/sample.crypto.wolfssl_tls_thread -vvv
+          rm -rf zephyr/twister-out
+
+      - name: Zip failure logs
+        if: ${{ failure() && (steps.wolfssl-test.outcome == 'failure' || steps.wolfssl-tls-sock.outcome == 'failure' || steps.wolfssl-tls-thread.outcome == 'failure') }}
+        run: |
+          zip -9 -r logs.zip zephyr/twister-out
+
+      - name: Upload failure logs
+        if: ${{ failure() && (steps.wolfssl-test.outcome == 'failure' || steps.wolfssl-tls-sock.outcome == 'failure' || steps.wolfssl-tls-thread.outcome == 'failure') }}
+        uses: actions/upload-artifact@v4
+        with:
+          name: zephyr-client-test-logs
+          path: logs.zip
+          retention-days: 5

.gitignore

@@ -3,14 +3,14 @@ ctaocrypt/src/src/
 *.lo
 *.la
 *.o
-*.patch
 *.deps
 *.d
 *.libs
 *.cache
 .dirstamp
 *.user
-configure
+!*-VS2022.vcxproj.user
+configure
 config.*
 !cmake/config.in
 *Debug/
@@ -33,7 +33,7 @@ aclocal.m4
 aminclude.am
 lt*.m4
 Makefile.in
-Makefile
+/Makefile
 depcomp
 missing
 libtool
@@ -64,6 +64,8 @@ ctaocrypt/benchmark/benchmark
 ctaocrypt/test/testctaocrypt
 wolfcrypt/benchmark/benchmark
 wolfcrypt/test/testwolfcrypt
+examples/async/async_client
+examples/async/async_server
 examples/benchmark/tls_bench
 examples/client/client
 examples/echoclient/echoclient
@@ -74,20 +76,25 @@ examples/sctp/sctp-server-dtls
 examples/sctp/sctp-client
 examples/sctp/sctp-client-dtls
 examples/asn1/asn1
+examples/pem/pem
 server_ready
 snifftest
 output
 mcapi/test
 testsuite/testsuite
-tests/unit
 testsuite/testsuite.test
-tests/unit.test
-tests/bio_write_test.txt
-tests/test-log-dump-to-file.txt
-test-write-dhparams.pem
 testsuite/*.der
 testsuite/*.pem
 testsuite/*.raw
+testsuite/*.obj
+testsuite/*.pdb
+testsuite/*.idb
+tests/unit
+tests/unit.test
+tests/bio_write_test.txt
+tests/test-log-dump-to-file.txt
+tests/cert_cache.tmp
+test-write-dhparams.pem
 cert.der
 cert.pem
 certecc.der
@@ -238,6 +245,16 @@ linuxkm/libwolfssl.mod.c
 linuxkm/libwolfssl.lds
 linuxkm/module_exports.c
 linuxkm/linuxkm/get_thread_size
+linuxkm/linuxkm
+linuxkm/src
+linuxkm/patches/src
+*.nds
+bsdkm/export_syms
+bsdkm/i386
+bsdkm/libwolfssl.ko
+bsdkm/machine
+bsdkm/opt_global.h
+bsdkm/x86
 
 # autotools generated
 scripts/unit.test
@@ -282,23 +299,6 @@ mqx/wolfcrypt_benchmark/.settings
 mqx/wolfcrypt_benchmark/.cwGeneratedFileSetLog
 mqx/wolfcrypt_benchmark/SaAnalysispointsManager.apconfig
 
-# User Crypto example build
-wolfcrypt/user-crypto/aclocal.m4
-wolfcrypt/user-crypto/config.guess
-wolfcrypt/user-crypto/autom4te.cache
-wolfcrypt/user-crypto/config.log
-wolfcrypt/user-crypto/config.status
-wolfcrypt/user-crypto/config.sub
-wolfcrypt/user-crypto/depcomp
-wolfcrypt/user-crypto/install-sh
-wolfcrypt/user-crypto/libtool
-wolfcrypt/user-crypto/ltmain.sh
-wolfcrypt/user-crypto/m4
-wolfcrypt/user-crypto/missing
-wolfcrypt/user-crypto/Makefile.in
-wolfcrypt/user-crypto/lib/libusercrypto.*
-*.hzs
-
 # wolfSSL CSharp wrapper
 wrapper/CSharp/x64/
 
@@ -335,6 +335,10 @@ wolfcrypt/src/port/intel/qat_test
 # Arduino Generated Files
 /IDE/ARDUINO/wolfSSL
 scripts/memtest.txt
+/IDE/ARDUINO/Arduino_README_prepend.md.tmp
+/IDE/ARDUINO/library.properties.tmp
+/IDE/ARDUINO/library.properties.tmp.backup
+/IDE/ARDUINO/PREPENDED_README.md
 
 # Doxygen generated files
 doc/doxygen_warnings
@@ -343,6 +347,8 @@ doc/pdf
 
 # XCODE Index
 IDE/XCODE/Index
+IDE/**/xcshareddata
+IDE/**/DerivedData
 
 # ARM DS-5 && Eclipse
 \.settings/
@@ -403,17 +409,72 @@ libFuzzer
 XXX-fips-test
 
 # ASYNC
-async
+/wolfAsyncCrypt
+/async
 
 # Generated user_settings_asm.h.
 user_settings_asm.h
 
-# VisualGD
+# VisualGDB
 **/.visualgdb
 
 # Espressif sdk config default should be saved in sdkconfig.defaults
 # we won't track the actual working sdkconfig files
 /IDE/Espressif/**/sdkconfig
+/IDE/Espressif/**/sdkconfig.old
+
+# ESP8266 RTOS SDK has a slightly different sdkconfig filename to exclude:
+/IDE/Espressif/**/sdkconfig.debug
+/IDE/Espressif/**/sdkconfig.release
+/IDE/Espressif/**/sdkconfig-debug
+/IDE/Espressif/**/sdkconfig-release
+
+# Always include Espressif makefiles (typically only used for ESP8266)
+!/IDE/Espressif/**/Makefile
+!/IDE/Espressif/**/component.mk
+
+# Ignore all the example logs
+/IDE/Espressif/ESP-IDF/examples/**/logs/*
+
+# MPLAB
+/IDE/MPLABX16/wolfssl.X/dist/default/
+/IDE/MPLABX16/wolfssl.X/.generated_files
+/IDE/MPLABX16/wolfcrypt_test.X/dist/default/
+/IDE/MPLABX16/wolfcrypt_test.X/.generated_files
 
 # auto-created CMake backups
 **/CMakeLists.txt.old
+
+# MagicCrypto (ARIA Cipher)
+MagicCrypto
+
+# CMake  build directory
+/out
+/out_temp
+
+# debian packaging
+debian/changelog
+debian/control
+debian/rules
+*.deb
+
+# Ada/Alire files
+wrapper/Ada/alire/
+wrapper/Ada/config/
+wrapper/Ada/lib/
+wrapper/Ada/obj/
+
+# Rust wrapper files
+/wrapper/rust/*/target/
+
+# PlatformIO
+/**/.pio
+/**/.vscode/.browse.c_cpp.db*
+/**/.vscode/c_cpp_properties.json
+/**/.vscode/launch.json
+/**/.vscode/ipch
+/**/sdkconfig.esp32dev
+
+# Autogenerated debug trace headers
+wolfssl/debug-trace-error-codes.h
+wolfssl/debug-untrace-error-codes.h

CMakePresets.json

@@ -0,0 +1,20 @@
+{
+    "version": 3,
+    "cmakeMinimumRequired": {
+        "major": 3,
+        "minor": 22,
+        "patch": 0
+    },
+    "configurePresets": [
+        {
+            "name": "vs2022-x64",
+            "displayName": "Visual Studio 2022 x64",
+            "generator": "Visual Studio 17 2022",
+            "architecture": "x64",
+            "binaryDir": "${sourceDir}/build",
+            "cacheVariables": {
+                "CMAKE_EXPORT_COMPILE_COMMANDS": "ON"
+            }
+        }
+    ]
+}

CMakeSettings.json

@@ -0,0 +1,9 @@
+{
+    "configurations": [
+        {
+            "name": "No-CMake",
+            "generator": "Ninja",
+            "buildCommandArgs": "echo 'No build command'"
+        }
+    ]
+}

COPYING

@@ -1,281 +1,622 @@
                     GNU GENERAL PUBLIC LICENSE
-                       Version 2, June 1991
+                       Version 3, 29 June 2007
 
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
                             Preamble
 
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Lesser General Public License instead.)  You can apply it to
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
 your programs, too.
 
   When we speak of free software, we are referring to freedom, not
 price.  Our General Public Licenses are designed to make sure that you
 have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
 
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
 
   For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
 
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
 
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
 
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
 
   The precise terms and conditions for copying, distribution and
 modification follow.
 
-                    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+                       TERMS AND CONDITIONS
 
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
+  0. Definitions.
 
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
+  "This License" refers to version 3 of the GNU General Public License.
 
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
 
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
 
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
 
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
 
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
 
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
 
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
 
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
+  1. Source Code.
 
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
 
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
 
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
 
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
 
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
 
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
+  The Corresponding Source for a work in source code form is that
+same work.
 
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
+  2. Basic Permissions.
 
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
 
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
 
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
 this License.
 
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
 otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
 
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
+  13. Use with the GNU Affero General Public License.
 
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
 
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
+  14. Revised Versions of this License.
 
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
 be similar in spirit to the present version, but may differ in detail to
 address new problems or concerns.
 
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
 
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
 
-                            NO WARRANTY
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
 
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
+  15. Disclaimer of Warranty.
 
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
 
                      END OF TERMS AND CONDITIONS
 
@@ -287,15 +628,15 @@ free software which everyone can redistribute and change under these terms.
 
   To do so, attach the following notices to the program.  It is safest
 to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
+state the exclusion of warranty; and each file should have at least
 the "copyright" line and a pointer to where the full notice is found.
 
     <one line to give the program's name and a brief idea of what it does.>
     Copyright (C) <year>  <name of author>
 
-    This program is free software; you can redistribute it and/or modify
+    This program is free software: you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
+    the Free Software Foundation, either version 3 of the License, or
     (at your option) any later version.
 
     This program is distributed in the hope that it will be useful,
@@ -303,37 +644,31 @@ the "copyright" line and a pointer to where the full notice is found.
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     GNU General Public License for more details.
 
-    You should have received a copy of the GNU General Public License along
-    with this program; if not, write to the Free Software Foundation, Inc.,
-    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 Also add information on how to contact you by electronic and paper mail.
 
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
+  If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
 
-    Gnomovision version 69, Copyright (C) year name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    <program>  Copyright (C) <year>  <name of author>
+    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
     This is free software, and you are welcome to redistribute it
     under certain conditions; type `show c' for details.
 
 The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
+parts of the General Public License.  Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
 
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<http://www.gnu.org/licenses/>.
 
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Lesser General
-Public License instead of this License.
+  The GNU General Public License does not permit incorporating your program
+into proprietary programs.  If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.  But first, please read
+<http://www.gnu.org/philosophy/why-not-lgpl.html>.

Docker/Dockerfile

@@ -3,23 +3,56 @@ FROM $DOCKER_BASE_IMAGE
 
 USER root
 
-ARG DEPS_WOLFSSL="build-essential autoconf libtool clang clang-tools zlib1g-dev libuv1-dev libpam0g-dev valgrind git linux-headers-generic gcc-multilib g++-multilib libpcap-dev bubblewrap gdb iputils-ping lldb bsdmainutils netcat binutils-arm-linux-gnueabi binutils-aarch64-linux-gnu"
+# Set timezone to UTC
+RUN ln -snf /usr/share/zoneinfo/UTC /etc/localtime && echo UTC > /etc/timezone
+
+ARG DEPS_WOLFSSL="build-essential autoconf libtool clang clang-tools zlib1g-dev libuv1-dev libpam0g-dev valgrind git linux-headers-generic gcc-multilib g++-multilib libpcap-dev bubblewrap gdb iputils-ping lldb bsdmainutils netcat-traditional binutils-arm-linux-gnueabi binutils-aarch64-linux-gnu"
 ARG DEPS_LIBOQS="astyle cmake gcc ninja-build libssl-dev python3-pytest python3-pytest-xdist unzip xsltproc doxygen graphviz python3-yaml valgrind git"
-ARG DEPS_TESTS="abi-dumper libcurl4-openssl-dev tcpdump"
+ARG DEPS_UDP_PROXY="wget libevent-dev"
+ARG DEPS_TESTS="abi-dumper libcurl4-openssl-dev tcpdump libpsl-dev python3-pandas python3-tabulate libnl-genl-3-dev libcap-ng-dev python3-virtualenv curl jq"
+ARG DEPS_TOOLS="ccache clang-tidy maven libfile-util-perl android-tools-adb usbutils shellcheck"
 RUN DEBIAN_FRONTEND=noninteractive apt update && apt install -y apt-utils \
-                    && apt install -y ${DEPS_WOLFSSL} ${DEPS_LIBOQS} ${DEPS_TESTS} \
+                    && apt install -y ${DEPS_WOLFSSL} ${DEPS_LIBOQS} ${DEPS_UDP_PROXY} ${DEPS_TESTS} ${DEPS_TOOLS} \
                     && apt clean -y && rm -rf /var/lib/apt/lists/*
 
+# Add 'docker' user
 ARG USER=docker
 ARG UID=1000
 ARG GID=1000
 RUN groupadd -f -g ${GID} docker && ( getent passwd ${UID} || useradd -ms /bin/bash ${USER} -u ${UID} -g ${GID} )
 
+# Add github.com as an SSH known host
+RUN ssh -o StrictHostKeyChecking=no -T git@github.com; cat ~/.ssh/known_hosts >> /etc/ssh/ssh_known_hosts
+
+# install ccache
+RUN mkdir -p /opt/ccache/bin && for prog in gcc g++ cc c++ cpp arm-none-eabi-c++ arm-none-eabi-cpp arm-none-eabi-gcc arm-none-eabi-g++; do ln -s /usr/bin/ccache /opt/ccache/bin/$(basename $prog); done
+ENV PATH /opt/ccache/bin:$PATH
+
 # install liboqs
-RUN git clone --single-branch https://github.com/open-quantum-safe/liboqs.git && cd liboqs && git checkout af76ca3b1f2fbc1f4f0967595f3bb07692fb3d82 \
+RUN git clone --single-branch https://github.com/open-quantum-safe/liboqs.git && cd liboqs && git checkout db08f12b5a96aa6582a82aac7f65cf8a4d8b231f \
     && mkdir build && cd build && cmake -DOQS_DIST_BUILD=ON -DOQS_USE_CPUFEATURE_INSTRUCTIONS=OFF -DOQS_USE_OPENSSL=0 .. && make -j8 all && make install && cd ../.. && rm -rf liboqs
 
+RUN mkdir /opt/sources
+
+# install liblms
+RUN cd /opt/sources && git clone --single-branch https://github.com/cisco/hash-sigs.git && cd hash-sigs && git checkout b0631b8891295bf2929e68761205337b7c031726 \
+    && sed -i 's/USE_OPENSSL 1/USE_OPENSSL 0/g' sha256.h && make -j4 hss_lib_thread.a
+
+# Install pkixssh to /opt/pkixssh for X509 interop testing with wolfSSH
+RUN mkdir /var/empty
+RUN cd /opt/sources && wget -q -O- https://roumenpetrov.info/secsh/src/pkixssh-15.1.tar.gz | tar xzf - && cd pkixssh-15.1 && ./configure --prefix=/opt/pkixssh/ --exec-prefix=/opt/pkixssh/ && make install
+
+# Install udp/tcp-proxy
+RUN cd /opt/sources && git clone --depth=1 --single-branch --branch=main http://github.com/wolfssl/udp-proxy && cd udp-proxy && make && cp tcp_proxy udp_proxy /bin/.
+# Install libbacktrace
+RUN cd /opt/sources && git clone --depth=1 --single-branch https://github.com/ianlancetaylor/libbacktrace.git && cd libbacktrace && mkdir build && cd build && ../configure && make && make install
+
 # Allow non-root to use tcpdump (will need NET_RAW and NET_ADMIN capability when running the container)
 RUN setcap 'CAP_NET_RAW+eip CAP_NET_ADMIN+eip' /usr/bin/tcpdump
+# Allow non-root to use gdb on processes (will need SYS_PTRACE capability when running the container)
+RUN setcap 'CAP_SYS_PTRACE+eip' /usr/bin/gdb
 
-USER ${UID}:${GID}
+# Add in Jenkins userID
+RUN for i in $(seq 1001 1010); do ( getent passwd ${i} || useradd -ms /bin/bash jenkins${i} -u ${i} -g ${GID} ); done
+
+USER ${UID}:${GID}

Docker/Dockerfile.cross-compiler

@@ -0,0 +1,11 @@
+ARG DOCKER_BASE_IMAGE=wolfssl/wolfssl-builder
+FROM $DOCKER_BASE_IMAGE
+
+USER root
+
+ARG DEPS_TESTING="gcc-arm-linux-gnueabi gcc-arm-linux-gnueabihf gcc-aarch64-linux-gnu gcc-powerpc-linux-gnu gcc-powerpc64-linux-gnu gcc-arm-none-eabi"
+RUN DEBIAN_FRONTEND=noninteractive apt update \
+                    && apt install -y ${DEPS_TESTING} \
+                    && apt clean -y && rm -rf /var/lib/apt/lists/*
+
+USER docker

Docker/OpenWrt/runTests.sh

@@ -1,23 +1,27 @@
 #!/bin/sh
 
 runCMD() { # usage: runCMD "<command>" "<retVal>"
-    eval $1 >/dev/null 2>&1
+    TMP_FILE=$(mktemp)
+    eval $1 > $TMP_FILE 2>&1
     RETVAL=$?
     if [ "$RETVAL" != "$2" ]; then
-        echo "Command ($1) returned ${RETVAL}, but expected $2. Rerunning with output to terminal:"
-        eval $1
+        echo "Command ($1) returned ${RETVAL}, but expected $2. Error output:"
+        cat $TMP_FILE
         exit 1
     fi
 }
 
 # Successful tests
 runCMD "ldd /lib/libustream-ssl.so" 0
+# Temporary workaround: comment out missing kmods repo line for 21.02 specifically.
+# Remove after fixed upstream.
+runCMD "sed '\/src\/gz openwrt_kmods https:\/\/downloads.openwrt.org\/releases\/21.02-SNAPSHOT\/targets\/x86\/64\/kmods\/5.4.238-1-5a722da41bc36de95a7195be6fce1b45/s//#&/' -i /etc/opkg/distfeeds.conf" 0
 runCMD "opkg update" 0
-runCMD "uclient-fetch -O /dev/null 'https://letsencrypt.org'" 0
+runCMD "uclient-fetch 'https://letsencrypt.org'" 0
 # Negative tests
-runCMD "uclient-fetch --ca-certificate=/dev/null -O /dev/null 'https://letsencrypt.org'" 5
-runCMD "uclient-fetch -O /dev/null 'https://self-signed.badssl.com/'" 5
-runCMD "uclient-fetch -O /dev/null 'https://untrusted-root.badssl.com/'" 5
-runCMD "uclient-fetch -O /dev/null 'https://expired.badssl.com/'" 5
+runCMD "uclient-fetch --ca-certificate=/dev/null 'https://letsencrypt.org'" 5
+runCMD "uclient-fetch 'https://self-signed.badssl.com/'" 5
+runCMD "uclient-fetch 'https://untrusted-root.badssl.com/'" 5
+runCMD "uclient-fetch 'https://expired.badssl.com/'" 5
 
 echo "All tests passed."

Docker/README.md

@@ -1,7 +1,10 @@
 # Overview
-This is a simple Docker environment for compiling and running WolfSSL. Use `run.sh` to build everything (Docker container, WolfSSL, etc.). This script takes in arguments that can be passed to `./configure`. For example: `run.sh --enable-all`
+This is a Docker environment for compiling, testing and running WolfSSL. Use `run.sh` to build everything (Docker container, WolfSSL, etc.). This script takes in arguments that can be passed to `./configure`. For example: `run.sh --enable-all`
 
-When the compilation and tests succeed, you will be dropped in to a shell environment within the container. This can be useful to build other things within the environment.
+When the compilation and tests succeed, you will be dropped in to a shell environment within the container. This can be useful to build other things within the environment. Additional tests can be run as well as debugging of code.
+
+# Docker Hub
+These images are also uploaded to the wolfSSL's [Docker Hub page](https://hub.docker.com/orgs/wolfssl/repositories). There is a convenience script here `buildAndPush.sh` that will create the appropriate containers and push them to the repo.
 
 # FAQ
 ## permission denied while trying to connect to the Docker daemon socket at unix:///var/run/docker.sock
@@ -10,4 +13,4 @@ You need to be added to the `docker` group to run Docker containers. Run `sudo u
 ## Unable to access symlinked files outside of WolfSSL
 The volume mounted in the Docker container needs to have all files that your compilation will need. To solve this, you have a couple options:
 1. Change the `WOLFSSL_DIR` variable in the `run.sh` to one higher up (by adding `/..` to the path). Then update the `docker build` to include the correct path to the Dockerfile and the `docker run` argument to the working directory (`-w`) to the WolfSSL source directory
-2. Move the external repository to within the WolfSSL directory. For example create an `external` folder which has your files. This route may have complications when stashing Git work.
+2. Move the external repository to within the WolfSSL directory. For example create an `external` folder which has your files. This route may have complications when stashing Git work.

Docker/buildAndPush.sh

@@ -0,0 +1,56 @@
+#!/usr/bin/env bash
+
+# Assume we're in wolfssl/Docker
+WOLFSSL_DIR=$(builtin cd ${BASH_SOURCE%/*}/..; pwd)
+
+DOCKER_BUILD_OPTIONS="$1"
+if [ "${DOCKER_BASE_IMAGE}" != "" ]; then
+    DOCKER_BUILD_OPTIONS+=" --build-arg DOCKER_BASE_IMAGE=${DOCKER_BASE_IMAGE}"
+fi
+
+NUM_FAILURES=0
+
+CUR_DATE=$(date -u +%F)
+echo "Building wolfssl/wolfssl-builder:${CUR_DATE} as ${DOCKER_BUILD_OPTIONS}"
+docker build -t wolfssl/wolfssl-builder:${CUR_DATE} ${DOCKER_BUILD_OPTIONS} "${WOLFSSL_DIR}/Docker" && \
+    docker tag wolfssl/wolfssl-builder:${CUR_DATE} wolfssl/wolfssl-builder:latest && \
+    docker build --build-arg DOCKER_BASE_IMAGE=wolfssl/wolfssl-builder:${CUR_DATE} -t wolfssl/testing-cross-compiler:${CUR_DATE} "${WOLFSSL_DIR}/Docker" -f Dockerfile.cross-compiler && \
+    docker tag wolfssl/testing-cross-compiler:${CUR_DATE} wolfssl/testing-cross-compiler:latest
+
+if [ $? -eq 0 ]; then
+    echo "Push containers to DockerHub [y/N]? "
+    read val
+    if [ "$val" = "y" ]; then
+        docker push wolfssl/wolfssl-builder:${CUR_DATE} && docker push wolfssl/wolfssl-builder:latest && \
+            docker push wolfssl/testing-cross-compiler:${CUR_DATE} && docker push wolfssl/testing-cross-compiler:latest
+        if [ $? -ne 0 ]; then
+            echo "Warning: push failed. Continuing"
+            ((NUM_FAILURES++))
+        fi
+    fi
+else
+    echo "Warning: Build wolfssl/wolfssl-builder failed. Continuing"
+    ((NUM_FAILURES++))
+fi
+
+echo "Building wolfssl/wolfCLU:${CUR_DATE}"
+DOCKER_ARGS="--pull --build-arg DUMMY=${CUR_DATE} --platform=linux/amd64,linux/arm64,linux/arm/v7 ${WOLFSSL_DIR}/Docker/wolfCLU"
+docker buildx build -t wolfssl/wolfclu:${CUR_DATE} ${DOCKER_ARGS} && \
+    docker buildx build -t wolfssl/wolfclu:latest ${DOCKER_ARGS}
+if [ $? -eq 0 ]; then
+    echo "Push containers to DockerHub [y/N]? "
+    read val
+    if [ "$val" = "y" ]; then
+        docker buildx build ${DOCKER_ARGS} --push -t wolfssl/wolfclu:${CUR_DATE} && \
+            docker buildx build ${DOCKER_ARGS} --push -t wolfssl/wolfclu:latest
+        if [ $? -ne 0 ]; then
+            echo "Warning: push failed. Continuing"
+            ((NUM_FAILURES++))
+        fi
+    fi
+else
+    echo "Warning: Build wolfssl/wolfclu failed. Continuing"
+    ((NUM_FAILURES++))
+fi
+
+echo "Script completed in $SECONDS seconds. Had $NUM_FAILURES failures."

Docker/include.am

@@ -3,9 +3,11 @@
 # All paths should be given relative to the root
 
 EXTRA_DIST+= Docker/Dockerfile
+EXTRA_DIST+= Docker/Dockerfile.cross-compiler
 EXTRA_DIST+= Docker/run.sh
 EXTRA_DIST+= Docker/README.md
 
+ignore_files+=Docker/buildAndPush.sh
 ignore_files+=Docker/OpenWRT/Dockerfile
 ignore_files+=Docker/OpenWRT/runTests.sh
 ignore_files+=Docker/OpenWRT/README.md

Docker/packaging/debian/Dockerfile

@@ -0,0 +1,5 @@
+FROM debian:latest
+
+RUN apt-get -y update
+RUN apt-get -y upgrade
+RUN apt-get install -y build-essential autoconf gawk debhelper lintian dpkg-dev

Docker/packaging/fedora/Dockerfile

@@ -0,0 +1,3 @@
+FROM fedora:latest
+
+RUN dnf install -y make automake gcc rpmdevtools

Docker/run.sh

@@ -1,13 +1,13 @@
-#!/bin/bash
+#!/usr/bin/env bash
 
 echo "Running with \"${*}\"..."
 
 # Assume we're in wolfssl/Docker
 WOLFSSL_DIR=$(builtin cd ${BASH_SOURCE%/*}/..; pwd)
 
-docker build -t wolfssl --build-arg UID=$(id -u) --build-arg GID=$(id -g) "${WOLFSSL_DIR}/Docker" && \
-  docker run --rm -it -v ${HOME}/.gitconfig:/home/docker/.gitconfig:ro -v ${HOME}/.ssh:/home/docker/.ssh:ro -v "${WOLFSSL_DIR}:/tmp/wolfssl" -w /tmp/wolfssl wolfssl /bin/bash -c "./autogen.sh && ./configure ${*@Q} && make" && \
-  docker run --rm -it -v ${HOME}/.gitconfig:/home/docker/.gitconfig:ro -v ${HOME}/.ssh:/home/docker/.ssh:ro -v "${WOLFSSL_DIR}:/tmp/wolfssl" -w /tmp/wolfssl wolfssl /bin/bash
+docker build -t wolfssl/wolfssl-builder --build-arg UID=$(id -u) --build-arg GID=$(id -g) "${WOLFSSL_DIR}/Docker" && \
+  docker run --rm -it -v ${HOME}/.gitconfig:/home/docker/.gitconfig:ro -v ${HOME}/.ssh:/home/docker/.ssh:ro -v "${WOLFSSL_DIR}:/tmp/wolfssl" -w /tmp/wolfssl wolfssl/wolfssl-builder /bin/bash -c "./autogen.sh && ./configure ${*@Q} && make" && \
+  docker run --rm -it -v ${HOME}/.gitconfig:/home/docker/.gitconfig:ro -v ${HOME}/.ssh:/home/docker/.ssh:ro -v "${WOLFSSL_DIR}:/tmp/wolfssl" -w /tmp/wolfssl wolfssl/wolfssl-builder /bin/bash
 
 exitval=$?
 echo "Exited with error code $exitval"

Docker/wolfCLU/Dockerfile

@@ -1,9 +1,9 @@
 ARG DOCKER_BASE_IMAGE=ubuntu
-FROM ubuntu as BUILDER
+FROM ubuntu AS builder
 
-ARG DEPS_WOLFSSL="build-essential autoconf libtool zlib1g-dev libuv1-dev libpam0g-dev git libpcap-dev libcurl4-openssl-dev bsdmainutils netcat iputils-ping bubblewrap"
+ARG DEPS_WOLFSSL="build-essential autoconf libtool zlib1g-dev libuv1-dev libpam0g-dev git libpcap-dev libcurl4-openssl-dev bsdmainutils netcat-traditional iputils-ping bubblewrap"
 RUN DEBIAN_FRONTEND=noninteractive apt update && apt install -y apt-utils \
-                    && apt install -y ${DEPS_WOLFSSL} ${DEPS_LIBOQS} \
+                    && apt install -y ${DEPS_WOLFSSL} \
                     && apt clean -y && rm -rf /var/lib/apt/lists/*
 
 ARG NUM_CPU=16
@@ -18,9 +18,9 @@ RUN git clone --depth=1 --single-branch --branch=main http://github.com/wolfssl/
 
 FROM ${DOCKER_BASE_IMAGE}
 USER root
-COPY --from=BUILDER /usr/local/lib/libwolfssl.so /usr/local/lib/
-COPY --from=BUILDER /usr/local/bin/wolfssl* /usr/local/bin/
+COPY --from=builder /usr/local/lib/libwolfssl.so /usr/local/lib/
+COPY --from=builder /usr/local/bin/wolfssl* /usr/local/bin/
 RUN ldconfig
-CMD ["/usr/local/bin/wolfssl"]
+ENTRYPOINT ["/usr/local/bin/wolfssl"]
 LABEL org.opencontainers.image.source=https://github.com/wolfssl/wolfssl
 LABEL org.opencontainers.image.description="Simple wolfCLU in a container"

Docker/wolfCLU/README.md

@@ -1,6 +1,6 @@
 This is a small container that has wolfCLU installed for quick access. To build your own run the following:
 ```
-docker build --pull --build-arg DUMMY=$(date +%s) -t wolfclu . 
+docker build --pull --build-arg DUMMY=$(date +%s) -t wolfclu .
 ```
 
 To run the container, you can use:

Docker/yocto/Dockerfile

@@ -0,0 +1,29 @@
+FROM ubuntu
+
+# Set timezone to UTC
+RUN ln -snf /usr/share/zoneinfo/UTC /etc/localtime && echo UTC > /etc/timezone
+
+RUN DEBIAN_FRONTEND=noninteractive apt update && apt install -y gawk wget git diffstat unzip texinfo gcc build-essential chrpath socat cpio python3 python3-pip python3-pexpect xz-utils debianutils iputils-ping python3-git python3-jinja2 libegl1-mesa libsdl1.2-dev python3-subunit mesa-common-dev zstd liblz4-tool file locales libacl1 vim && apt clean -y && rm -rf /var/lib/apt/lists/*
+RUN locale-gen en_US.UTF-8
+
+# Add in non-root user
+ENV UID_OF_DOCKERUSER 1000
+RUN useradd -m -s /bin/bash -g users -u ${UID_OF_DOCKERUSER} dockerUser
+RUN chown -R dockerUser:users /home/dockerUser && chown dockerUser:users /opt
+
+USER dockerUser
+
+RUN cd /opt && git clone git://git.yoctoproject.org/poky
+WORKDIR /opt/poky
+
+ARG YOCTO_VERSION=kirkstone
+RUN git checkout -t origin/${YOCTO_VERSION} -b ${YOCTO_VERSION} && git pull
+
+# This arg is to be able to force a rebuild starting from this line
+ARG DUMMY=date
+RUN DUMMY=${DUMMY} git clone --single-branch --branch=master https://github.com/wolfssl/meta-wolfssl.git && \
+    /bin/bash -c "source oe-init-build-env" && \
+    echo 'IMAGE_INSTALL:append = " wolfssl wolfclu wolfssh wolfmqtt wolftpm wolfclu "' >> /opt/poky/build/conf/local.conf && \
+    sed -i '/\/opt\/poky\/meta-poky \\/a \\t/opt/poky/meta-wolfssl \\' /opt/poky/build/conf/bblayers.conf
+
+RUN /bin/bash -c "source oe-init-build-env && bitbake core-image-minimal"

Docker/yocto/buildAndPush.sh

@@ -0,0 +1,27 @@
+#!/usr/bin/env bash
+
+# Assume we're in wolfssl/Docker/yocto
+WOLFSSL_DIR=$(builtin cd ${BASH_SOURCE%/*}/../..; pwd)
+
+DOCKER_BUILD_OPTIONS="$1"
+if [ "${DOCKER_BASE_IMAGE}" != "" ]; then
+    DOCKER_BUILD_OPTIONS+=" --build-arg DOCKER_BASE_IMAGE=${DOCKER_BASE_IMAGE}"
+fi
+
+NUM_FAILURES=0
+
+CUR_DATE=$(date -u +%F)
+for ver in kirkstone langdale scarthgap; do
+    echo "Building wolfssl/yocto:${ver}-${CUR_DATE} as ${DOCKER_BUILD_OPTIONS}"
+    docker build -t wolfssl/yocto:${ver}-${CUR_DATE} --build-arg YOCTO_VERSION=${ver} --build-arg BUILD_DATE=${CUR_DATE} -f Dockerfile "${WOLFSSL_DIR}/Docker/yocto" && \
+        docker tag wolfssl/yocto:${ver}-${CUR_DATE} wolfssl/yocto:${ver}-latest
+    if [ $? -eq 0 ]; then
+        echo "Pushing containers to DockerHub"
+        docker push wolfssl/yocto:${ver}-${CUR_DATE} && docker push wolfssl/yocto:${ver}-latest
+    else
+        echo "Warning: Build wolfssl/yocto:${ver} failed. Continuing"
+        ((NUM_FAILURES++))
+    fi
+done
+
+echo "Script completed in $SECONDS seconds. Had $NUM_FAILURES failures."