Merge pull request #8712 from JacobBarthelmeh/release

prepare for release 5.8.0

.codespellexcludelines

@@ -0,0 +1,18 @@
+###############################################################################
+# In this file, you should add the line of the file that needs to be ignored.
+# The line should be exactly as it appears in the file.
+###############################################################################
+        0x0b, 0x45, 0x6e, 0x67, 0x69, 0x6e, 0x65, 0x65, /* .Enginee */
+        0x66, 0x6f, 0x40, 0x77, 0x6f, 0x6c, 0x66, 0x73, /* fo@wolfs */
+        0x0a, 0x8b, 0x98, 0xf3, 0xe3, 0xff, 0x4e, 0x44, /* ......ND */
+ot+3i9DAgBkcRcAtjOj4LaR0VknFBbVPFd5uRHg5h6h+u/N5GJG79G+dwfCMNYxd\n\
+static const byte plaintext[] = "Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras lacus odio, pretium vel sagittis ac, facilisis quis diam. Vivamus condimentum velit sed dolor consequat interdum. Etiam eleifend ornare felis, eleifend egestas odio vulputate eu. Sed nec orci nunc. Etiam quis mi augue. Donec ullamcorper suscipit lorem, vel luctus augue cursus fermentum. Etiam a porta arcu, in convallis sem. Integer efficitur elementum diam, vel scelerisque felis posuere placerat. Donec vestibulum sit amet leo sit amet tincidunt. Etiam et vehicula turpis. Phasellus quis finibus sapien. Sed et tristique turpis. Nullam vitae sagittis tortor, et aliquet lorem. Cras a leo scelerisque, convallis lacus ut, fermentum urna. Mauris quis urna diam. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos. Nam aliquam vehicula orci id pulvinar. Proin mollis, libero sollicitudin tempor ultrices, massa augue tincidunt turpis, sit amet aliquam neque nibh nec dui. Fusce finibus massa quis rutrum suscipit cras amet";
+rsource "Kconfig.tls-generic"
+        /* Loop over authenticated associated data AD1..ADn */
+  /* no easy answer [c'est la vie].  Just division */
+    const uint8_t* hashIn, int hashSz)
+    XMEMCPY(hash + (curveSz - hashSz), hashIn, hashSz);
+        0x63, 0x72, 0x65, 0x65, 0x6e, 0x20, 0x77, 0x6f, 0x75, 0x6c, 0x64, 0x20, 0x62, 0x65, 0x20, 0x69, /* creen would be i */
+\pagenumbering{alph}
+    DES3_KEY_SIZE       = 24,  /* 3 des ede               */
+/* functions added to support above needed, removed TOOM and KARATSUBA */

.github/ISSUE_TEMPLATE/bug_report.yaml

@@ -6,8 +6,10 @@ body:
   - type: markdown
     attributes:
       value: >
-        Thanks for reporting an bug. If you would prefer a private method,
-        please email support@wolfssl.com
+        Thanks for reporting a bug. If you would prefer a private method,
+        or if this is a vulnerability report please email support@wolfssl.com
+        instead. This is publicly viewable and not appropriate for vulnerability
+        reports.
   - type: input
     id: contact
     attributes:

.github/ISSUE_TEMPLATE/other.yaml

@@ -6,7 +6,9 @@ body:
     attributes:
       value: >
         Thanks for reporting an issue. If you would prefer a private method,
-        please email support@wolfssl.com
+        or if this is a vulnerability report please email support@wolfssl.com
+        instead. This is publicly viewable and not appropriate for vulnerability
+        reports.
   - type: input
     id: version
     attributes:

.github/workflows/ada.yml

@@ -0,0 +1,33 @@
+name: WolfSSL Ada Build Tests
+
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+jobs:
+  build:
+
+    runs-on: ubuntu-latest
+
+    steps:
+    - uses: actions/checkout@master
+
+    - name: Install gnat
+      run: |
+        sudo apt-get update
+        sudo apt-get install -y gnat gprbuild
+
+    - name: Checkout wolfssl
+      uses: actions/checkout@master
+      with:
+        repository: wolfssl/wolfssl
+        path: wolfssl
+
+    - name: Build wolfssl Ada
+      working-directory: ./wolfssl/wrapper/Ada
+      run: |
+        mkdir obj
+        gprbuild default.gpr
+        gprbuild examples.gpr

.github/workflows/async.yml

@@ -23,7 +23,8 @@ jobs:
           '--enable-ocsp CFLAGS="-DTEST_NONBLOCK_CERTS"',
         ]
     name: make check
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 6
     steps:
@@ -36,7 +37,7 @@ jobs:
           ./configure ${{ matrix.config }}
           make check
 
-      - name: Print errors 
+      - name: Print errors
         if: ${{ failure() }}
         run: |
           if [ -f test-suite.log ] ; then

.github/workflows/bind.yml

@@ -0,0 +1,93 @@
+name: bind9 Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-all
+          install: true
+          check: false
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-bind
+          path: build-dir.tgz
+          retention-days: 5
+
+  bind_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        # List of releases to test
+        ref: [ 9.18.0, 9.18.28 ]
+    name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 10
+    needs: build_wolfssl
+    steps:
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-bind
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Install dependencies
+        run: |
+          # Don't prompt for anything
+          export DEBIAN_FRONTEND=noninteractive
+          sudo apt-get update
+          # hostap dependencies
+          sudo apt-get install -y libuv1-dev libnghttp2-dev libcap-dev libcmocka-dev
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Checkout bind9
+        uses: actions/checkout@v4
+        with:
+          repository: isc-projects/bind9
+          path: bind
+          ref: v${{ matrix.ref }}
+
+      - name: Build and test bind9
+        working-directory: bind
+        run: |
+          export PKG_CONFIG_PATH=$GITHUB_WORKSPACE/build-dir/lib/pkgconfig
+          patch -p1 < $GITHUB_WORKSPACE/osp/bind9/${{ matrix.ref }}.patch
+          autoreconf -ivf
+          ./configure --with-wolfssl
+          sed -i 's/SUBDIRS = system//g' bin/tests/Makefile # remove failing tests
+          make -j V=1
+          make -j V=1 check

.github/workflows/cmake.yml

@@ -0,0 +1,109 @@
+name: WolfSSL CMake Build Tests
+
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+jobs:
+  build:
+
+    runs-on: ubuntu-latest
+
+    steps:
+# pull wolfSSL
+    - uses: actions/checkout@master
+
+# install cmake
+    - name: Install cmake
+      run: |
+        sudo apt-get update
+        sudo apt-get install -y cmake
+
+# pull wolfssl
+    - name: Checkout wolfssl
+      uses: actions/checkout@master
+      with:
+        repository: wolfssl/wolfssl
+        path: wolfssl
+
+# build wolfssl
+    - name: Build wolfssl
+      working-directory: ./wolfssl
+      run: |
+        mkdir build
+        cd build
+        cmake -DCMAKE_VERBOSE_MAKEFILE:BOOL=ON -DWOLFSSL_INSTALL=yes -DCMAKE_INSTALL_PREFIX="$GITHUB_WORKSPACE/install" \
+            -DWOLFSSL_16BIT:BOOL=no -DWOLFSSL_32BIT:BOOL=no -DWOLFSSL_AES:BOOL=yes \
+            -DWOLFSSL_AESCBC:BOOL=yes -DWOLFSSL_AESCCM:BOOL=yes -DWOLFSSL_AESCFB:BOOL=yes \
+            -DWOLFSSL_AESCTR:BOOL=yes -DWOLFSSL_AESGCM:STRING=yes -DWOLFSSL_AESKEYWRAP:BOOL=yes \
+            -DWOLFSSL_AESOFB:BOOL=yes -DWOLFSSL_AESSIV:BOOL=yes -DWOLFSSL_ALIGN_DATA:BOOL=yes \
+            -DWOLFSSL_ALPN:BOOL=ON -DWOLFSSL_ALT_CERT_CHAINS:BOOL=ON -DWOLFSSL_ARC4:BOOL=yes \
+            -DWOLFSSL_ARIA:BOOL=no -DWOLFSSL_ASIO:BOOL=no -DWOLFSSL_ASM:BOOL=yes -DWOLFSSL_ASN:BOOL=yes \
+            -DWOLFSSL_ASYNC_THREADS:BOOL=no -DWOLFSSL_BASE64_ENCODE:BOOL=yes -DWOLFSSL_CAAM:BOOL=no \
+            -DWOLFSSL_CERTEXT:BOOL=yes -DWOLFSSL_CERTGEN:BOOL=yes -DWOLFSSL_CERTGENCACHE:BOOL=no \
+            -DWOLFSSL_CERTREQ:BOOL=yes -DWOLFSSL_CHACHA:STRING=yes -DWOLFSSL_CMAC:BOOL=yes \
+            -DWOLFSSL_CODING:BOOL=yes -DWOLFSSL_CONFIG_H:BOOL=yes -DWOLFSSL_CRL:STRING=yes \
+            -DWOLFSSL_CRYPTOCB:BOOL=yes -DWOLFSSL_CRYPTOCB_NO_SW_TEST:BOOL=no \
+            -DWOLFSSL_CRYPT_TESTS:BOOL=yes -DWOLFSSL_CRYPT_TESTS_HELP:BOOL=no \
+            -DWOLFSSL_CRYPT_TESTS_LIBS:BOOL=no -DWOLFSSL_CURL:BOOL=yes -DWOLFSSL_CURVE25519:STRING=yes \
+            -DWOLFSSL_CURVE448:STRING=yes -DWOLFSSL_DEBUG:BOOL=yes -DWOLFSSL_DES3:BOOL=ON \
+            -DWOLFSSL_DES3_TLS_SUITES:BOOL=no -DWOLFSSL_DH:STRING=yes -DWOLFSSL_DH_DEFAULT_PARAMS:BOOL=yes \
+            -DWOLFSSL_DSA:BOOL=yes -DWOLFSSL_DTLS:BOOL=ON -DWOLFSSL_DTLS13:BOOL=yes \
+            -DWOLFSSL_DTLS_CID:BOOL=yes -DWOLFSSL_ECC:STRING=yes \
+            -DWOLFSSL_ECCCUSTCURVES:STRING=all -DWOLFSSL_ECCSHAMIR:BOOL=yes \
+            -DWOLFSSL_ECH:BOOL=yes -DWOLFSSL_ED25519:BOOL=yes -DWOLFSSL_ED448:STRING=yes \
+            -DWOLFSSL_ENCKEYS:BOOL=yes -DWOLFSSL_ENC_THEN_MAC:BOOL=yes -DWOLFSSL_ERROR_QUEUE:BOOL=yes \
+            -DWOLFSSL_ERROR_STRINGS:BOOL=yes -DWOLFSSL_EXAMPLES:BOOL=yes -DWOLFSSL_EXPERIMENTAL:BOOL=yes \
+            -DWOLFSSL_EXTENDED_MASTER:BOOL=yes -DWOLFSSL_EX_DATA:BOOL=yes -DWOLFSSL_FAST_MATH:BOOL=no \
+            -DWOLFSSL_FILESYSTEM:BOOL=yes -DWOLFSSL_HARDEN:BOOL=yes -DWOLFSSL_HASH_DRBG:BOOL=yes \
+            -DWOLFSSL_HKDF:BOOL=yes -DWOLFSSL_HPKE:BOOL=yes -DWOLFSSL_HRR_COOKIE:STRING=yes \
+            -DWOLFSSL_INLINE:BOOL=yes -DWOLFSSL_INSTALL:BOOL=yes -DWOLFSSL_IP_ALT_NAME:BOOL=ON \
+            -DWOLFSSL_KEYGEN:BOOL=yes -DWOLFSSL_KEYING_MATERIAL:BOOL=ON \
+            -DWOLFSSL_MD4:BOOL=ON -DWOLFSSL_MD5:BOOL=yes -DWOLFSSL_MEMORY:BOOL=yes -DWOLFSSL_NO_STUB:BOOL=no \
+            -DWOLFSSL_OAEP:BOOL=yes -DWOLFSSL_OCSP:BOOL=yes -DWOLFSSL_OCSPSTAPLING:BOOL=ON \
+            -DWOLFSSL_OCSPSTAPLING_V2:BOOL=ON -DWOLFSSL_OLD_NAMES:BOOL=yes -DWOLFSSL_OLD_TLS:BOOL=yes \
+            -DWOLFSSL_OPENSSLALL:BOOL=yes -DWOLFSSL_OPENSSLEXTRA:BOOL=ON -DWOLFSSL_OPTFLAGS:BOOL=yes \
+            -DWOLFSSL_OQS:BOOL=no -DWOLFSSL_PKCALLBACKS:BOOL=yes -DWOLFSSL_PKCS12:BOOL=yes \
+            -DWOLFSSL_PKCS7:BOOL=yes -DWOLFSSL_POLY1305:BOOL=yes -DWOLFSSL_POSTAUTH:BOOL=yes \
+            -DWOLFSSL_PWDBASED:BOOL=yes -DWOLFSSL_QUIC:BOOL=yes -DWOLFSSL_REPRODUCIBLE_BUILD:BOOL=no \
+            -DWOLFSSL_RNG:BOOL=yes -DWOLFSSL_RSA:BOOL=yes -DWOLFSSL_RSA_PSS:BOOL=yes \
+            -DWOLFSSL_SESSION_TICKET:BOOL=ON -DWOLFSSL_SHA:BOOL=yes -DWOLFSSL_SHA224:BOOL=yes \
+            -DWOLFSSL_SHA3:STRING=yes -DWOLFSSL_SHA384:BOOL=yes -DWOLFSSL_SHA512:BOOL=yes \
+            -DWOLFSSL_SHAKE128:STRING=yes -DWOLFSSL_SHAKE256:STRING=yes -DWOLFSSL_SINGLE_THREADED:BOOL=no \
+            -DWOLFSSL_SNI:BOOL=yes -DWOLFSSL_SP_MATH_ALL:BOOL=yes -DWOLFSSL_SRTP:BOOL=yes \
+            -DWOLFSSL_STUNNEL:BOOL=yes -DWOLFSSL_SUPPORTED_CURVES:BOOL=yes -DWOLFSSL_SYS_CA_CERTS:BOOL=yes \
+            -DWOLFSSL_TICKET_NONCE_MALLOC:BOOL=yes -DWOLFSSL_TLS13:BOOL=yes -DWOLFSSL_TLSV12:BOOL=yes \
+            -DWOLFSSL_TLSX:BOOL=yes -DWOLFSSL_TPM:BOOL=yes -DWOLFSSL_CLU:BOOL=yes -DWOLFSSL_USER_SETTINGS:BOOL=no \
+            -DWOLFSSL_USER_SETTINGS_ASM:BOOL=no -DWOLFSSL_WOLFSSH:BOOL=ON -DWOLFSSL_X86_64_BUILD_ASM:BOOL=yes \
+            -DWOLFSSL_MLKEM=1 -DWOLFSSL_LMS=1 -DWOLFSSL_LMSSHA256192=1 -DWOLFSSL_EXPERIMENTAL=1 \
+            -DWOLFSSL_X963KDF:BOOL=yes \
+            -DCMAKE_C_FLAGS="-DWOLFSSL_DTLS_CH_FRAG" \
+            ..
+        cmake --build .
+        ctest -j $(nproc)
+        cmake --install .
+
+        # clean up
+        cd ..
+        rm -rf build
+
+        # Kyber Cmake broken
+        # -DWOLFSSL_KYBER:BOOL=yes
+
+# build "lean-tls" wolfssl
+    - name: Build wolfssl with lean-tls
+      working-directory: ./wolfssl
+      run: |
+        mkdir build
+        cd build
+        cmake -DCMAKE_VERBOSE_MAKEFILE:BOOL=ON -DWOLFSSL_INSTALL=yes -DCMAKE_INSTALL_PREFIX="$GITHUB_WORKSPACE/install" \
+            -DWOLFSSL_LEAN_TLS:BOOL=yes \
+            ..
+        cmake --build .
+        cmake --install .
+
+        # clean up
+        cd ..
+        rm -rf build

.github/workflows/codespell.yml

@@ -0,0 +1,30 @@
+name: Codespell test
+
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  codespell:
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    steps:
+    - uses: actions/checkout@v4
+
+    - uses: codespell-project/actions-codespell@v2.1
+      with:
+        check_filenames: true
+        check_hidden: true
+          # Add comma separated list of words that occur multiple times that should be ignored (sorted alphabetically, case sensitive)
+        ignore_words_list: adin,aNULL,brunch,carryIn,chainG,ciph,cLen,cliKs,dout,haveA,inCreated,inOut,inout,larg,LEAPYEAR,Merget,optionA,parm,parms,repid,rIn,userA,ser,siz,te,Te
+          # The exclude_file contains lines of code that should be ignored. This is useful for individual lines which have non-words that can safely be ignored.
+        exclude_file: '.codespellexcludelines'
+          # To skip files entirely from being processed, add it to the following list:
+        skip: '*.cproject,*.der,*.mtpj,*.pem,*.vcxproj,.git,*.launch,*.scfg,*.revoked'

.github/workflows/coverity-scan-fixes.yml

@@ -0,0 +1,53 @@
+name: Coverity Scan master branch
+
+on:
+  workflow_dispatch:
+  schedule:
+    - cron: '0 0 * * 1-5'
+    - cron: '0 0 * * 0'
+    - cron: '0 12 * * 0'
+
+jobs:
+  coverity:
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    steps:
+    - uses: actions/checkout@v4
+      with:
+        ref: master
+
+    - name: Configure wolfSSL with enable-all M-F
+      if: github.event.schedule == '0 0 * * 1-5'
+      run: |
+        ./autogen.sh
+        ./configure --enable-all
+
+    - name: Configure wolfSSL with enable-all enable-smallstack Sun at 00:00
+      if: github.event.schedule == '0 0 * * 0'
+      run: |
+        ./autogen.sh
+        ./configure --enable-all --enable-smallstack
+
+    - name: Configure wolfSSL with bigendian Sun at 12:00
+      if: github.event.schedule == '0 12 * * 0'
+      run: |
+        ./autogen.sh
+        ./configure --enable-all CFLAGS="-DBIG_ENDIAN_ORDER"
+
+    - name: Check secrets
+      env:
+        token_var: ${{ secrets.COVERITY_SCAN_TOKEN }}
+        email_var: ${{ secrets.COVERITY_SCAN_EMAIL }}
+      run: |
+        token_len=${#token_var}
+        echo "$token_len"
+        email_len=${#email_var}
+        echo "$email_len"
+
+    - uses: vapier/coverity-scan-action@v1
+      with:
+        build_language: 'cxx'
+        project: "wolfSSL/wolfssl"
+        token: ${{ secrets.COVERITY_SCAN_TOKEN }}
+        email: ${{ secrets.COVERITY_SCAN_EMAIL }}
+        command: "make"

.github/workflows/curl.yml

@@ -15,7 +15,8 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     steps:
@@ -26,16 +27,20 @@ jobs:
           configure: --enable-curl
           install: true
 
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-curl
-          path: build-dir
+          path: build-dir.tgz
           retention-days: 5
 
   test_curl:
     name: ${{ matrix.curl_ref }}
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 15
     needs: build_wolfssl
@@ -47,14 +52,15 @@ jobs:
     - name: Install test dependencies
       run: |
         sudo apt-get update
-        sudo apt-get install nghttp2 libpsl5 libpsl-dev
-        sudo pip install impacket
+        sudo apt-get install nghttp2 libpsl5 libpsl-dev python3-impacket
 
     - name: Download lib
       uses: actions/download-artifact@v4
       with:
         name: wolf-install-curl
-        path: build-dir
+
+    - name: untar build-dir
+      run: tar -xf build-dir.tgz
 
     - name: Build curl
       uses: wolfSSL/actions-build-autotools-project@v1
@@ -67,4 +73,4 @@ jobs:
 
     - name: Test curl
       working-directory: curl
-      run: make -j test-ci
+      run: make -j $(nproc) test-ci

.github/workflows/cyrus-sasl.yml

@@ -15,8 +15,9 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     steps:
@@ -29,11 +30,14 @@ jobs:
           # Don't run tests as this config is tested in many other places
           check: false
 
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-sasl
-          path: build-dir
+          path: build-dir.tgz
           retention-days: 5
 
   sasl_check:
@@ -43,7 +47,8 @@ jobs:
         # List of releases to test
         ref: [ 2.1.28 ]
     name: ${{ matrix.ref }}
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     needs: build_wolfssl
@@ -60,7 +65,9 @@ jobs:
         uses: actions/download-artifact@v4
         with:
           name: wolf-install-sasl
-          path: build-dir
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
 
       - name: Checkout OSP
         uses: actions/checkout@v4
@@ -88,4 +95,11 @@ jobs:
         working-directory: sasl
         run: |
           make -j -C utils testsuite saslpasswd2
-          $GITHUB_WORKSPACE/osp/cyrus-sasl/${{ matrix.ref }}/run-tests.sh
+          # Retry up to five times
+          for i in {1..5}; do
+             TEST_RES=0
+             $GITHUB_WORKSPACE/osp/cyrus-sasl/${{ matrix.ref }}/run-tests.sh || TEST_RES=$?
+             if [ "$TEST_RES" -eq "0" ]; then
+                break
+             fi
+          done

.github/workflows/disabled/haproxy.yml

@@ -20,6 +20,7 @@ jobs:
         # List of refs to test
         ref: [ master ]
     name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     steps:
       - name: Build wolfSSL
@@ -57,4 +58,3 @@ jobs:
       - name: Test HaProxy
         working-directory: haproxy
         run: make reg-tests reg-tests/ssl VTEST_PROGRAM=$GITHUB_WORKSPACE/VTest/vtest
- 

.github/workflows/disabled/hitch.yml

@@ -15,6 +15,7 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
@@ -27,11 +28,14 @@ jobs:
           configure: --enable-hitch
           install: true
 
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-hitch
-          path: build-dir
+          path: build-dir.tgz
           retention-days: 5
 
   hitch_check:
@@ -44,6 +48,7 @@ jobs:
             ignore-tests: >-
               test13-r82.sh test15-proxy-v2-npn.sh test39-client-cert-proxy.sh
     name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
     runs-on: ubuntu-latest
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
@@ -53,7 +58,9 @@ jobs:
         uses: actions/download-artifact@v4
         with:
           name: wolf-install-hitch
-          path: build-dir
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
 
       - name: Checkout OSP
         uses: actions/checkout@v4
@@ -100,4 +107,4 @@ jobs:
         working-directory: ./hitch
         run: |
           export LD_LIBRARY_PATH=$GITHUB_WORKSPACE/build-dir/lib:$LD_LIBRARY_PATH
-          make check
+          make check

.github/workflows/disabled/hostap.yml

@@ -22,6 +22,7 @@ jobs:
           - build_id: hostap-build2
             wolf_extra_config: --enable-brainpool --enable-wpas-dpp
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
     runs-on: ubuntu-20.04
     # This should be a safe limit for the tests to run.
@@ -99,6 +100,7 @@ jobs:
               build_id: hostap-build2
             }
     name: hwsim test
+    if: github.repository_owner == 'wolfssl'
     # For openssl 1.1
     runs-on: ubuntu-20.04
     # This should be a safe limit for the tests to run.
@@ -181,7 +183,7 @@ jobs:
       - name: Checkout hostap
         uses: actions/checkout@v4
         with:
-          repository: julek-wolfssl/hostap-mirror 
+          repository: julek-wolfssl/hostap-mirror
           path: hostap
           ref: ${{ matrix.config.hostap_ref }}
           # necessary for cherry pick step
@@ -210,7 +212,7 @@ jobs:
           done
 
       - if: ${{ matrix.hostapd }}
-        name: Setup hostapd config file 
+        name: Setup hostapd config file
         run: |
           cp wolfssl/.github/workflows/hostap-files/configs/${{ matrix.config.hostap_ref }}/hostapd.config \
              hostap/hostapd/.config
@@ -220,7 +222,7 @@ jobs:
           EOF
 
       - if: ${{ matrix.wpa_supplicant }}
-        name: Setup wpa_supplicant config file 
+        name: Setup wpa_supplicant config file
         run: |
           cp wolfssl/.github/workflows/hostap-files/configs/${{ matrix.config.hostap_ref }}/wpa_supplicant.config \
              hostap/wpa_supplicant/.config

.github/workflows/disabled/msys2.yml

@@ -0,0 +1,41 @@
+name: MSYS2 Build Test
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  msys2:
+    runs-on: windows-latest
+    defaults:
+      run:
+        shell: msys2 {0}
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - { sys: ucrt64,  compiler: mingw-w64-ucrt-x86_64-gcc }
+          - { sys: mingw64, compiler: mingw-w64-x86_64-gcc }
+          - { sys: msys, compiler: gcc }
+    steps:
+      - uses: actions/checkout@v3
+      - uses: msys2/setup-msys2@v2
+        with:
+          msystem: ${{ matrix.sys }}
+          update: true
+          install: git ${{matrix.compiler}} autotools base-devel autoconf netcat
+      - name: configure wolfSSL
+        run: ./autogen.sh && ./configure CFLAGS="-DUSE_CERT_BUFFERS_2048 -DUSE_CERT_BUFFERS_256 -DNO_WRITE_TEMP_FILES"
+      - name: build wolfSSL
+        run: make check
+      - name: Display log
+        if: always()
+        run: cat test-suite.log

.github/workflows/docker-Espressif.yml

@@ -14,7 +14,8 @@ concurrency:
 jobs:
   espressif_latest:
     name: latest Docker container
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 12
     container:
@@ -22,22 +23,24 @@ jobs:
     steps:
       - uses: actions/checkout@v4
       - name: Initialize Espressif IDE and build examples
-        run: . /opt/esp/idf/export.sh; IDE/Espressif/ESP-IDF/compileAllExamples.sh
+        run: cd /opt/esp/idf && . ./export.sh && cd $GITHUB_WORKSPACE; IDE/Espressif/ESP-IDF/compileAllExamples.sh
   espressif_v4_4:
     name: v4.4 Docker container
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     container:
       image: espressif/idf:release-v4.4
     steps:
       - uses: actions/checkout@v4
       - name: Initialize Espressif IDE and build examples
-        run: . /opt/esp/idf/export.sh; IDE/Espressif/ESP-IDF/compileAllExamples.sh
+        run: cd /opt/esp/idf && . ./export.sh && cd $GITHUB_WORKSPACE; IDE/Espressif/ESP-IDF/compileAllExamples.sh
   espressif_v5_0:
     name: v5.0 Docker container
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     container:
       image: espressif/idf:release-v5.0
     steps:
       - uses: actions/checkout@v4
       - name: Initialize Espressif IDE and build examples
-        run: . /opt/esp/idf/export.sh; IDE/Espressif/ESP-IDF/compileAllExamples.sh
+        run: cd /opt/esp/idf && . ./export.sh && cd $GITHUB_WORKSPACE; IDE/Espressif/ESP-IDF/compileAllExamples.sh

.github/workflows/docker-OpenWrt.yml

@@ -17,7 +17,8 @@ concurrency:
 jobs:
     build_library:
         name: Compile libwolfssl.so
-        runs-on: ubuntu-latest
+        if: github.repository_owner == 'wolfssl'
+        runs-on: ubuntu-22.04
         # This should be a safe limit for the tests to run.
         timeout-minutes: 4
         container:
@@ -28,15 +29,20 @@ jobs:
             - uses: actions/checkout@v4
             - name: Compile libwolfssl.so
               run: ./autogen.sh && ./configure --enable-all && make
+              # 2024-08-05 - Something broke in the actions. They are no longer following links.
+            - name: tar libwolfssl.so
+              working-directory: src/.libs
+              run: tar -zcf libwolfssl.tgz libwolfssl.so*
             - name: Upload libwolfssl.so
               uses: actions/upload-artifact@v4
               with:
                 name: openwrt-libwolfssl.so
-                path: src/.libs/libwolfssl.so
+                path: src/.libs/libwolfssl.tgz
                 retention-days: 5
     compile_container:
         name: Compile container
-        runs-on: ubuntu-latest
+        if: github.repository_owner == 'wolfssl'
+        runs-on: ubuntu-22.04
         # This should be a safe limit for the tests to run.
         timeout-minutes: 2
         needs: build_library
@@ -50,7 +56,9 @@ jobs:
             - uses: actions/download-artifact@v4
               with:
                 name: openwrt-libwolfssl.so
-                path: Docker/OpenWrt/.
+                path: .
+            - name: untar libwolfssl.so
+              run: tar -xf libwolfssl.tgz -C Docker/OpenWrt
             - name: Build but dont push
               uses: docker/build-push-action@v5
               with:

.github/workflows/gencertbuf.yml

@@ -0,0 +1,41 @@
+name: Test gencertbuf script
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  gencertbuf:
+    name: gencertbuf
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 6
+    steps:
+      - uses: actions/checkout@v4
+        name: Checkout wolfSSL
+
+      - name: Test generate wolfssl/certs_test.h
+        run: ./gencertbuf.pl
+
+      - name: Test wolfSSL
+        run: |
+          ./autogen.sh
+          ./configure --enable-all --enable-experimental --enable-dilithium --enable-kyber
+          make
+          ./wolfcrypt/test/testwolfcrypt
+
+      - name: Print errors
+        if: ${{ failure() }}
+        run: |
+          if [ -f test-suite.log ] ; then
+            cat test-suite.log
+          fi

.github/workflows/grpc.yml

@@ -15,8 +15,9 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 10
     steps:
@@ -27,11 +28,14 @@ jobs:
           configure: --enable-all 'CPPFLAGS=-DWOLFSSL_RSA_KEY_CHECK -DHAVE_EX_DATA_CLEANUP_HOOKS'
           install: true
 
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-grpc
-          path: build-dir
+          path: build-dir.tgz
           retention-days: 5
 
   grpc_check:
@@ -47,7 +51,8 @@ jobs:
               test_core_security_ssl_credentials_test test_cpp_end2end_ssl_credentials_test
               h2_ssl_cert_test h2_ssl_session_reuse_test
     name: ${{ matrix.ref }}
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 30
     needs: build_wolfssl
@@ -65,7 +70,14 @@ jobs:
         uses: actions/download-artifact@v4
         with:
           name: wolf-install-grpc
-          path: build-dir
+
+      - name: Setup cmake version
+        uses: jwlawson/actions-setup-cmake@v2
+        with:
+          cmake-version: '3.25.x'
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
 
       - name: Checkout OSP
         uses: actions/checkout@v4
@@ -87,7 +99,7 @@ jobs:
           git submodule update --init
           mkdir cmake/build
           cd cmake/build
-          cmake -DgRPC_BUILD_TESTS=ON -DgRPC_SSL_PROVIDER=wolfssl \
+          cmake -DCMAKE_POLICY_VERSION_MINIMUM=3.1 -DgRPC_BUILD_TESTS=ON -DgRPC_SSL_PROVIDER=wolfssl \
             -DWOLFSSL_INSTALL_DIR=$GITHUB_WORKSPACE/build-dir ../..
           make -j $(nproc) ${{ matrix.tests }}
 

.github/workflows/haproxy.yml

@@ -0,0 +1,91 @@
+name: haproxy Test
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-haproxy
+          install: true
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-haproxy
+          path: build-dir.tgz
+          retention-days: 5
+
+  test_haproxy:
+    name: ${{ matrix.haproxy_ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 15
+    needs: build_wolfssl
+    strategy:
+      fail-fast: false
+      matrix:
+        haproxy_ref: [ 'v3.1.0' ]
+    steps:
+    - name: Install test dependencies
+      run: |
+        sudo apt-get update
+        sudo apt-get install libpcre2-dev
+
+    - name: Download lib
+      uses: actions/download-artifact@v4
+      with:
+        name: wolf-install-haproxy
+
+    - name: untar build-dir
+      run: tar -xf build-dir.tgz
+
+    # check cache for haproxy if not there then download it
+    - name: Check haproxy cache
+      uses: actions/cache@v4
+      id: cache-haproxy
+      with:
+        path: build-dir/haproxy-${{matrix.haproxy_ref}}
+        key: haproxy-${{matrix.haproxy_ref}}
+
+    - name: Download haproxy if needed
+      if: steps.cache-haproxy.outputs.cache-hit != 'true'
+      uses: actions/checkout@v3
+      with:
+        repository: haproxy/haproxy
+        ref: ${{matrix.haproxy_ref}}
+        path: build-dir/haproxy-${{matrix.haproxy_ref}}
+
+    - name: Build haproxy
+      working-directory: build-dir/haproxy-${{matrix.haproxy_ref}}
+      run: make clean && make TARGET=linux-glibc USE_OPENSSL_WOLFSSL=1 SSL_LIB=$GITHUB_WORKSPACE/build-dir/lib SSL_INC=$GITHUB_WORKSPACE/build-dir/include ADDLIB=-Wl,-rpath,$GITHUB_WORKSPACE/build-dir/lib CFLAGS="-fsanitize=address" LDFLAGS="-fsanitize=address"
+
+    - name: Build haproxy vtest
+      working-directory: build-dir/haproxy-${{matrix.haproxy_ref}}
+      run: ./scripts/build-vtest.sh
+
+    - name: Test haproxy
+      working-directory: build-dir/haproxy-${{matrix.haproxy_ref}}
+      run: VTEST_PROGRAM=$GITHUB_WORKSPACE/build-dir/vtest/vtest make reg-tests -- --debug reg-tests/ssl/*

.github/workflows/hostap-vm.yml

@@ -13,7 +13,7 @@ concurrency:
 # END OF COMMON SECTION
 
 env:
-  LINUX_REF: v6.6
+  LINUX_REF: v6.12
 
 jobs:
   build_wolfssl:
@@ -24,10 +24,11 @@ jobs:
             wolf_extra_config: --disable-tls13
           - build_id: hostap-vm-build2
             wolf_extra_config: >-
-              --enable-wpas-dpp --enable-brainpool --with-eccminsz=192 
+              --enable-wpas-dpp --enable-brainpool --with-eccminsz=192
               --enable-tlsv10 --enable-oldtls
     name: Build wolfSSL
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 10
     steps:
@@ -52,40 +53,65 @@ jobs:
             ${{ env.wolf_debug_flags }} ${{ matrix.wolf_extra_config }}
           install: true
 
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: ${{ matrix.build_id }}
-          path: build-dir
+          path: build-dir.tgz
           retention-days: 5
 
+  checkout_hostap:
+    name: Checkout hostap repo
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 10
+    steps:
+      - name: Checking if we have hostap in cache
+        uses: actions/cache@v4
+        id: cache
+        with:
+          path: hostap
+          key: hostap-repo
+          lookup-only: true
+
+      - name: Checkout hostap
+        run: git clone git://w1.fi/hostap.git hostap
+
   build_uml_linux:
     name: Build UML (UserMode Linux)
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 10
+    needs: checkout_hostap
     steps:
       - name: Checking if we have kernel in cache
         uses: actions/cache@v4
         id: cache
         with:
           path: linux/linux
-          key: ${{ env.LINUX_REF }}
+          key: hostap-linux-${{ env.LINUX_REF }}
           lookup-only: true
 
-      - name: Checkout hostap
+      - name: Checking if we have hostap in cache
         if: steps.cache.outputs.cache-hit != 'true'
-        uses: actions/checkout@v4
+        uses: actions/cache/restore@v4
         with:
-          repository: julek-wolfssl/hostap-mirror
           path: hostap
+          key: hostap-repo
+          fail-on-cache-miss: true
 
       - name: Checkout linux
         if: steps.cache.outputs.cache-hit != 'true'
         uses: actions/checkout@v4
         with:
-          repository: torvalds/linux 
+          repository: torvalds/linux
           path: linux
+          ref: ${{ env.LINUX_REF }}
 
       - name: Compile linux
         if: steps.cache.outputs.cache-hit != 'true'
@@ -136,18 +162,18 @@ jobs:
               build_id: hostap-vm-build2
             }
     name: hwsim test
-    # For openssl 1.1
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 45
-    needs: [build_wolfssl, build_uml_linux]
+    needs: [build_wolfssl, build_uml_linux, checkout_hostap]
     steps:
       - name: Checking if we have kernel in cache
         uses: actions/cache/restore@v4
         id: cache
         with:
           path: linux/linux
-          key: ${{ env.LINUX_REF }}
+          key: hostap-linux-${{ env.LINUX_REF }}
           fail-on-cache-miss: true
 
       - name: show file structure
@@ -178,7 +204,9 @@ jobs:
         uses: actions/download-artifact@v4
         with:
           name: ${{ matrix.config.build_id }}
-          path: build-dir
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
 
       - name: Install dependencies
         run: |
@@ -188,15 +216,19 @@ jobs:
           # hostap dependencies
           sudo apt-get install -y libpcap0.8 libpcap-dev curl libcurl4-openssl-dev \
             libnl-3-dev binutils-dev libssl-dev libiberty-dev libnl-genl-3-dev \
-            libnl-route-3-dev libdbus-1-dev bridge-utils tshark
-          sudo pip3 install pycryptodome
+            libnl-route-3-dev libdbus-1-dev bridge-utils tshark python3-pycryptodome
+          sudo pip install pycryptodome
 
-      - name: Checkout hostap
-        uses: actions/checkout@v4
+      - name: Checking if we have hostap in cache
+        uses: actions/cache/restore@v4
         with:
-          repository: julek-wolfssl/hostap-mirror 
           path: hostap
-          ref: ${{ matrix.config.hostap_ref }}
+          key: hostap-repo
+          fail-on-cache-miss: true
+
+      - name: Checkout correct ref
+        working-directory: hostap
+        run: git checkout ${{ matrix.config.hostap_ref }}
 
       - name: Update certs
         working-directory: hostap/tests/hwsim/auth_serv
@@ -228,7 +260,7 @@ jobs:
           fi
 
       - if: ${{ matrix.hostapd }}
-        name: Setup hostapd config file 
+        name: Setup hostapd config file
         run: |
           cp wolfssl/.github/workflows/hostap-files/configs/${{ matrix.config.hostap_ref }}/hostapd.config \
              hostap/hostapd/.config
@@ -238,7 +270,7 @@ jobs:
           EOF
 
       - if: ${{ matrix.wpa_supplicant }}
-        name: Setup wpa_supplicant config file 
+        name: Setup wpa_supplicant config file
         run: |
           cp wolfssl/.github/workflows/hostap-files/configs/${{ matrix.config.hostap_ref }}/wpa_supplicant.config \
              hostap/wpa_supplicant/.config
@@ -281,6 +313,7 @@ jobs:
             KERNELDIR=$GITHUB_WORKSPACE/linux
             KVMARGS="-cpu host"
           EOF
+          git config --global --add safe.directory $GITHUB_WORKSPACE/hostap
           # Run tests in increments of 200 to not stall out the parallel-vm script
           while mapfile -t -n 200 ary && ((${#ary[@]})); do
             TESTS=$(printf '%s\n' "${ary[@]}" | tr '\n' ' ')

.github/workflows/intelasm-c-fallback.yml

@@ -0,0 +1,52 @@
+name: Dynamic C Fallback Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  make_check:
+    strategy:
+      matrix:
+        config: [
+          # Add new configs here
+          '--enable-intelasm --enable-sp-asm --enable-all --enable-testcert --enable-acert --enable-dtls13 --enable-dtls-mtu --enable-dtls-frag-ch --enable-dtlscid --enable-quic --with-sys-crypto-policy CPPFLAGS="-DNO_WOLFSSL_CIPHER_SUITE_TEST -DWC_C_DYNAMIC_FALLBACK -DDEBUG_VECTOR_REGISTER_ACCESS -DDEBUG_VECTOR_REGISTER_ACCESS_FUZZING -DWC_DEBUG_CIPHER_LIFECYCLE"'
+        ]
+    name: make check
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 6
+    steps:
+      - uses: actions/checkout@v4
+        name: Checkout wolfSSL
+
+      - name: Test wolfSSL with WC_C_DYNAMIC_FALLBACK and DEBUG_VECTOR_REGISTER_ACCESS_FUZZING
+        run: |
+          ./autogen.sh
+          randseed=$(head -c 4 /dev/urandom | od -t u4 --address-radix=n)
+          randseed="${randseed#"${randseed%%[![:space:]]*}"}"
+          echo "fuzzing seed=${randseed}"
+          ./configure ${{ matrix.config }} CFLAGS="-DWC_DEBUG_VECTOR_REGISTERS_FUZZING_SEED=$randseed -fsanitize=leak -g -fno-omit-frame-pointer"
+          make -j 4
+          make check
+
+      - name: Print errors
+        if: ${{ failure() }}
+        run: |
+          for file in scripts/*.log
+          do
+              if [ -f "$file" ]; then
+                  echo "${file}:"
+                  cat "$file"
+                  echo "========================================================================"
+              fi
+          done

.github/workflows/ipmitool.yml

@@ -17,7 +17,8 @@ jobs:
   build_wolfssl:
     name: Build wolfSSL
     # Just to keep it the same as the testing target
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
+    if: github.repository_owner == 'wolfssl'
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     steps:
@@ -30,11 +31,14 @@ jobs:
           # Don't run tests as this config is tested in many other places
           check: false
 
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-ipmitool
-          path: build-dir
+          path: build-dir.tgz
           retention-days: 5
 
   build_ipmitool:
@@ -43,14 +47,19 @@ jobs:
       matrix:
         git_ref: [ c3939dac2c060651361fc71516806f9ab8c38901 ]
     name: ${{ matrix.git_ref }}
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     needs: build_wolfssl
     steps:
+      - name: Install dependencies
+        run: export DEBIAN_FRONTEND=noninteractive && sudo apt-get update && sudo apt-get install -y libreadline8
       - name: Download lib
         uses: actions/download-artifact@v4
         with:
           name: wolf-install-ipmitool
-          path: build-dir
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
 
       - name: Checkout OSP
         uses: actions/checkout@v4
@@ -74,4 +83,3 @@ jobs:
         run: |
           ldd src/ipmitool | grep wolfssl
           ldd src/ipmievd | grep wolfssl
- 

.github/workflows/jwt-cpp.yml

@@ -16,7 +16,8 @@ jobs:
   build_wolfssl:
     name: Build wolfSSL
     # Just to keep it the same as the testing target
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     steps:
@@ -29,20 +30,28 @@ jobs:
           # Don't run tests as this config is tested in many other places
           check: false
 
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-jwt-cpp
-          path: build-dir
+          path: build-dir.tgz
           retention-days: 5
 
   build_pam-ipmi:
+    if: github.repository_owner == 'wolfssl'
     strategy:
       fail-fast: false
       matrix:
-        ref: [ 0.6.0 ]
-    name: ${{ matrix.ref }}
-    runs-on: ubuntu-latest
+        config:
+          - ref: 0.7.0
+            runner: ubuntu-22.04
+          - ref: 0.6.0
+            runner: ubuntu-22.04
+    name: ${{ matrix.config.ref }}
+    runs-on: ${{ matrix.config.runner }}
     needs: build_wolfssl
     steps:
       - name: Install dependencies
@@ -56,7 +65,14 @@ jobs:
         uses: actions/download-artifact@v4
         with:
           name: wolf-install-jwt-cpp
-          path: build-dir
+
+      - name: Setup cmake version
+        uses: jwlawson/actions-setup-cmake@v2
+        with:
+          cmake-version: '3.25.x'
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
 
       - name: Checkout OSP
         uses: actions/checkout@v4
@@ -69,14 +85,14 @@ jobs:
         with:
           repository: Thalhammer/jwt-cpp
           path: jwt-cpp
-          ref: v${{ matrix.ref }}
+          ref: v${{ matrix.config.ref }}
 
       - name: Build pam-ipmi
         working-directory: jwt-cpp
         run: |
-          patch -p1 < ../osp/jwt-cpp/${{ matrix.ref }}.patch
+          patch -p1 < ../osp/jwt-cpp/${{ matrix.config.ref }}.patch
           PKG_CONFIG_PATH=$GITHUB_WORKSPACE/build-dir/lib/pkgconfig \
-            cmake -B build -DJWT_SSL_LIBRARY:STRING=wolfSSL -DJWT_BUILD_TESTS=ON .
+            cmake -DCMAKE_POLICY_VERSION_MINIMUM=3.5 -B build -DJWT_SSL_LIBRARY:STRING=wolfSSL -DJWT_BUILD_TESTS=ON .
           make -j -C build
           ldd ./build/tests/jwt-cpp-test | grep wolfssl
 

.github/workflows/krb5.yml

@@ -16,7 +16,8 @@ jobs:
   build_wolfssl:
     name: Build wolfSSL
     # Just to keep it the same as the testing target
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 5
     steps:
@@ -31,11 +32,14 @@ jobs:
           configure: --enable-krb CC='gcc -fsanitize=address'
           install: true
 
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-krb5
-          path: build-dir
+          path: build-dir.tgz
           retention-days: 5
 
   krb5_check:
@@ -45,7 +49,8 @@ jobs:
         # List of releases to test
         ref: [ 1.21.1 ]
     name: ${{ matrix.ref }}
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 8
     needs: build_wolfssl
@@ -54,7 +59,9 @@ jobs:
         uses: actions/download-artifact@v4
         with:
           name: wolf-install-krb5
-          path: build-dir
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
 
       - name: Checkout OSP
         uses: actions/checkout@v4
@@ -85,7 +92,7 @@ jobs:
           # Using rpath because LD_LIBRARY_PATH is overwritten during testing
           export WOLFSSL_CFLAGS="-I$GITHUB_WORKSPACE/build-dir/include -I$GITHUB_WORKSPACE/build-dir/include/wolfssl  -Wl,-rpath=$GITHUB_WORKSPACE/build-dir/lib"
           export WOLFSSL_LIBS="-lwolfssl -L$GITHUB_WORKSPACE/build-dir/lib -Wl,-rpath=$GITHUB_WORKSPACE/build-dir/lib"
-          ./configure --with-crypto-impl=wolfssl --with-tls-impl=wolfssl --disable-pkinit \
+          ./configure --with-crypto-impl=wolfssl --with-tls-impl=wolfssl --disable-pkinit --with-spake-openssl \
             CFLAGS='-fsanitize=address' LDFLAGS='-fsanitize=address'
           CFLAGS='-fsanitize=address' LDFLAGS='-fsanitize=address' make -j
 

.github/workflows/libspdm.yml

@@ -0,0 +1,91 @@
+name: libspdm Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-all --enable-static CFLAGS='-DRSA_MIN_SIZE=512'
+          install: true
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-libspdm
+          path: build-dir.tgz
+          retention-days: 5
+
+  libspdm_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        # List of releases to test
+        ref: [ 3.3.0 ]
+    name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    needs: build_wolfssl
+    steps:
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-libspdm
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Checkout libspdm
+        uses: actions/checkout@v4
+        with:
+          repository: DMTF/libspdm
+          path: libspdm
+          ref: ${{ matrix.ref }}
+
+      - name: Build and test libspdm
+        working-directory: libspdm
+        run: |
+          patch -p1 < ../osp/libspdm/${{ matrix.ref }}/libspdm-${{ matrix.ref }}.patch
+          git submodule update --init --recursive
+          # Silence cmake version warnings
+          find -name CMakeLists.txt -exec sed -i 's/cmake_minimum_required.*/cmake_minimum_required(VERSION 3.10)/g' {} \;
+          mkdir build
+          cd build
+          cmake -DARCH=x64 -DTOOLCHAIN=GCC -DTARGET=Debug -DCRYPTO=wolfssl -DENABLE_BINARY_BUILD=1 \
+            -DCOMPILED_LIBWOLFSSL_PATH=$GITHUB_WORKSPACE/build-dir/lib/libwolfssl.a \
+            -DWOLFSSL_INCDIR=$GITHUB_WORKSPACE/build-dir/include ..
+          make -j
+          cd ../unit_test/sample_key
+          ../../build/bin/test_crypt
+          ../../build/bin/test_spdm_secured_message
+          ../../build/bin/test_spdm_crypt

.github/workflows/libssh2.yml

@@ -16,7 +16,8 @@ jobs:
   build_wolfssl:
     name: Build wolfSSL
     # Just to keep it the same as the testing target
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-24.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     steps:
@@ -28,11 +29,14 @@ jobs:
           check: false # config is already tested in many other PRB's
           install: true
 
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-libssh2
-          path: build-dir
+          path: build-dir.tgz
           retention-days: 5
 
   libssh2_check:
@@ -40,9 +44,10 @@ jobs:
       fail-fast: false
       matrix:
         # List of releases to test
-        ref: [ 1.11.0 ]
+        ref: [ 1.11.1 ]
     name: ${{ matrix.ref }}
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-24.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 8
     needs: build_wolfssl
@@ -51,7 +56,9 @@ jobs:
         uses: actions/download-artifact@v4
         with:
           name: wolf-install-libssh2
-          path: build-dir
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
 
       - name: Build and test libssh2
         uses: wolfSSL/actions-build-autotools-project@v1
@@ -63,5 +70,8 @@ jobs:
           check: true
 
       - name: Confirm libssh2 built with wolfSSL
-        working-directory: ./libssh2
-        run: ldd src/.libs/libssh2.so | grep wolfssl
+        run: ldd libssh2/src/.libs/libssh2.so | grep wolfssl
+
+      - name: print server logs
+        if: ${{ failure() }}
+        run: tail -n +1 libssh2/tests/*.log

.github/workflows/libvncserver.yml

@@ -16,7 +16,8 @@ jobs:
   build_wolfssl:
     name: Build wolfSSL
     # Just to keep it the same as the testing target
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     steps:
@@ -29,27 +30,38 @@ jobs:
           # Don't run tests as this config is tested in many other places
           check: false
 
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-libvncserver
-          path: build-dir
+          path: build-dir.tgz
           retention-days: 5
 
   build_libvncserver:
     strategy:
       fail-fast: false
       matrix:
-        ref: [ 0.9.13 ]
+        ref: [ 0.9.13, 0.9.14 ]
     name: ${{ matrix.ref }}
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     needs: build_wolfssl
     steps:
       - name: Download lib
         uses: actions/download-artifact@v4
         with:
           name: wolf-install-libvncserver
-          path: build-dir
+
+      - name: Setup cmake version
+        uses: jwlawson/actions-setup-cmake@v2
+        with:
+          cmake-version: '3.25.x'
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
 
       - name: Checkout OSP
         uses: actions/checkout@v4
@@ -69,7 +81,7 @@ jobs:
         run: |
           patch -p1 < ../osp/libvncserver/${{ matrix.ref }}.patch
           PKG_CONFIG_PATH=$GITHUB_WORKSPACE/build-dir/lib/pkgconfig \
-            cmake -B build -DWITH_GNUTLS=OFF -DWITH_OPENSSL=OFF -DWITH_GCRYPT=OFF -DWITH_WOLFSSL=ON .
+            cmake -DCMAKE_POLICY_VERSION_MINIMUM=3.5 -B build -DWITH_GNUTLS=OFF -DWITH_OPENSSL=OFF -DWITH_GCRYPT=OFF -DWITH_WOLFSSL=ON .
           make -j -C build VERBOSE=1
           ldd build/libvncclient.so | grep wolfssl
           ldd build/libvncserver.so | grep wolfssl

.github/workflows/mbedtls.sh

@@ -0,0 +1,79 @@
+#!/usr/bin/env bash
+
+set -e
+set -x
+
+# Basic TLS test
+./mbedtls/build/programs/ssl/ssl_server2 > /tmp/server.log 2>&1 &
+SERVER_PID=$!
+sleep 0.1
+./mbedtls/build/programs/ssl/ssl_client2 # Confirm working with mbed
+env -C wolfssl ./examples/client/client -p 4433 -g \
+  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
+  -c ../mbedtls/framework/data_files/cli-rsa-sha256.crt \
+  -k ../mbedtls/framework/data_files/cli-rsa-sha256.key.pem
+kill $SERVER_PID
+sleep 0.1
+env -C wolfssl ./examples/server/server -p 4433 -i -g \
+  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
+  -c ../mbedtls/framework/data_files/server2-sha256.crt \
+  -k ../mbedtls/framework/data_files/server2.key.pem > /tmp/server.log 2>&1 &
+SERVER_PID=$!
+sleep 0.1
+./mbedtls/build/programs/ssl/ssl_client2
+env -C wolfssl ./examples/client/client -p 4433 -g \
+  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
+  -c ../mbedtls/framework/data_files/cli-rsa-sha256.crt \
+  -k ../mbedtls/framework/data_files/cli-rsa-sha256.key.pem
+kill $SERVER_PID
+sleep 0.1
+
+# Basic DTLS test
+./mbedtls/build/programs/ssl/ssl_server2 dtls=1 > /tmp/server.log 2>&1 &
+SERVER_PID=$!
+sleep 0.1
+./mbedtls/build/programs/ssl/ssl_client2 dtls=1 # Confirm working with mbed
+env -C wolfssl ./examples/client/client -p 4433 -g -u \
+  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
+  -c ../mbedtls/framework/data_files/cli-rsa-sha256.crt \
+  -k ../mbedtls/framework/data_files/cli-rsa-sha256.key.pem
+kill $SERVER_PID
+sleep 0.1
+env -C wolfssl ./examples/server/server -p 4433 -i -g -u \
+  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
+  -c ../mbedtls/framework/data_files/server2-sha256.crt \
+  -k ../mbedtls/framework/data_files/server2.key.pem > /tmp/server.log 2>&1 &
+SERVER_PID=$!
+sleep 0.1
+env -C wolfssl ./examples/client/client -p 4433 -g -u \
+  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
+  -c ../mbedtls/framework/data_files/cli-rsa-sha256.crt \
+  -k ../mbedtls/framework/data_files/cli-rsa-sha256.key.pem
+./mbedtls/build/programs/ssl/ssl_client2 dtls=1
+kill $SERVER_PID
+sleep 0.1
+
+# DTLS 1.2 CID test
+./mbedtls/build/programs/ssl/ssl_server2 dtls=1 cid=1 cid_val=121212 > /tmp/server.log 2>&1 &
+SERVER_PID=$!
+sleep 0.1
+./mbedtls/build/programs/ssl/ssl_client2 dtls=1 cid=1 cid_val=232323  # Confirm working with mbed
+env -C wolfssl ./examples/client/client -p 4433 -g -u --cid 232323 \
+  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
+  -c ../mbedtls/framework/data_files/cli-rsa-sha256.crt \
+  -k ../mbedtls/framework/data_files/cli-rsa-sha256.key.pem
+kill $SERVER_PID
+sleep 0.1
+env -C wolfssl ./examples/server/server -p 4433 -i -g -u --cid 121212 \
+  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
+  -c ../mbedtls/framework/data_files/server2-sha256.crt \
+  -k ../mbedtls/framework/data_files/server2.key.pem > /tmp/server.log 2>&1 &
+SERVER_PID=$!
+sleep 0.1
+./mbedtls/build/programs/ssl/ssl_client2 dtls=1 cid_val=232323
+env -C wolfssl ./examples/client/client -p 4433 -g -u --cid 232323 \
+  -A ../mbedtls/framework/data_files/test-ca-sha256.crt \
+  -c ../mbedtls/framework/data_files/cli-rsa-sha256.crt \
+  -k ../mbedtls/framework/data_files/cli-rsa-sha256.key.pem
+kill $SERVER_PID
+sleep 0.1

.github/workflows/mbedtls.yml

@@ -0,0 +1,86 @@
+name: mbedtls interop Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+env:
+  MBED_REF: v3.6.2
+
+jobs:
+  build_mbedtls:
+    name: Build mbedtls
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-latest
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 10
+    steps:
+      - name: Checking if we have mbed in cache
+        uses: actions/cache@v4
+        id: cache
+        with:
+          path: mbedtls
+          key: mbedtls-${{ env.MBED_REF }}
+          lookup-only: true
+
+      - name: Checkout mbedtls
+        if: steps.cache.outputs.cache-hit != 'true'
+        uses: actions/checkout@v4
+        with:
+          repository: Mbed-TLS/mbedtls
+          ref: ${{ env.MBED_REF }}
+          path: mbedtls
+
+      - name: Compile mbedtls
+        if: steps.cache.outputs.cache-hit != 'true'
+        working-directory: mbedtls
+        run: |
+          git submodule update --init
+          mkdir build
+          cd build
+          cmake ..
+          make -j
+          # convert key to pem format
+          openssl pkey -in framework/data_files/cli-rsa-sha256.key.der -text > framework/data_files/cli-rsa-sha256.key.pem
+          openssl pkey -in framework/data_files/server2.key.der -text > framework/data_files/server2.key.pem
+
+  mbedtls_test:
+    name: Test interop with mbedtls
+    runs-on: ubuntu-latest
+    needs: build_mbedtls
+    timeout-minutes: 10
+    if: github.repository_owner == 'wolfssl'
+    steps:
+      - name: Disable IPv6 (IMPORTANT, OTHERWISE DTLS MBEDTLS CLIENT WON'T CONNECT)
+        run: echo 1 | sudo tee /proc/sys/net/ipv6/conf/lo/disable_ipv6
+
+      - name: Checking if we have mbed in cache
+        uses: actions/cache/restore@v4
+        id: cache
+        with:
+          path: mbedtls
+          key: mbedtls-${{ env.MBED_REF }}
+          fail-on-cache-miss: true
+
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-dtls --enable-dtlscid
+          install: false
+          check: false
+
+      - name: Test interop
+        run: bash wolfssl/.github/workflows/mbedtls.sh
+
+      - name: print server logs
+        if: ${{ failure() }}
+        run: cat /tmp/server.log

.github/workflows/memcached.yml

@@ -16,7 +16,8 @@ jobs:
   build_wolfssl:
     name: Build wolfSSL
     # Just to keep it the same as the testing target
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     steps:
       - name: Build wolfSSL
         uses: wolfSSL/actions-build-autotools-project@v1
@@ -28,11 +29,14 @@ jobs:
       - name: Bundle Docker entry point
         run: cp wolfssl/.github/workflows/memcached.sh build-dir/bin
 
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-memcached
-          path: build-dir
+          path: build-dir.tgz
           retention-days: 5
 
   memcached_check:
@@ -43,14 +47,17 @@ jobs:
         include:
           - ref: 1.6.22
     name: ${{ matrix.ref }}
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     needs: build_wolfssl
     steps:
       - name: Download lib
         uses: actions/download-artifact@v4
         with:
           name: wolf-install-memcached
-          path: build-dir
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
 
       - name: Checkout OSP
         uses: actions/checkout@v4

.github/workflows/mosquitto.yml

@@ -0,0 +1,105 @@
+name: mosquitto Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    # Just to keep it the same as the testing target
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-mosquitto CFLAGS="-DALLOW_INVALID_CERTSIGN"
+          install: true
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-mosquitto
+          path: build-dir.tgz
+          retention-days: 5
+
+  mosquitto_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        ref: [ 2.0.18 ]
+    name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    needs: build_wolfssl
+    steps:
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-mosquitto
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Install dependencies
+        run: |
+            export DEBIAN_FRONTEND=noninteractive
+            sudo apt-get update
+            sudo apt-get install -y build-essential libev-dev libssl-dev automake python3-docutils libcunit1 libcunit1-doc libcunit1-dev pkg-config make python3-psutil
+
+      - name: Checkout mosquitto
+        uses: actions/checkout@v4
+        with:
+          repository: eclipse/mosquitto
+          ref: v${{ matrix.ref }}
+          path: mosquitto
+
+      - name: Update certs
+        run: |
+            cd $GITHUB_WORKSPACE/mosquitto/test/ssl
+            ./gen.sh
+            cat all-ca.crt >> server.crt
+
+      - name: Configure and build mosquitto
+        run: |
+            cd $GITHUB_WORKSPACE/mosquitto/
+            patch -p1 < $GITHUB_WORKSPACE/osp/mosquitto/${{ matrix.ref }}.patch
+            make WITH_TLS=wolfssl WITH_CJSON=no WITH_DOCS=no WOLFSSLDIR=$GITHUB_WORKSPACE/build-dir
+
+      - name: Run mosquitto tests
+        working-directory: ./mosquitto
+        run: |
+          # Retry up to five times
+          for i in {1..5}; do
+            TEST_RES=0
+            make WITH_TLS=wolfssl WITH_CJSON=no WITH_DOCS=no WOLFSSLDIR=$GITHUB_WORKSPACE/build-dir ptest || TEST_RES=$?
+            if [ "$TEST_RES" -eq "0" ]; then
+              break
+            fi
+          done
+          if [ "$TEST_RES" -ne "0" ]; then
+            exit $TEST_RES
+          fi

.github/workflows/multi-arch.yml

@@ -36,7 +36,8 @@ jobs:
             CFLAGS: -marm -DWOLFSSL_SP_ARM_ARCH=6
             ARCH: armel
             EXTRA_OPTS: --enable-sp-asm
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 10
     steps:
@@ -51,7 +52,7 @@ jobs:
             CFLAGS: ${{ matrix.CFLAGS }}
             QEMU_LD_PREFIX: /usr/${{ matrix.HOST }}
         run: ./autogen.sh && ./configure --host=${{ matrix.HOST }} --enable-all --disable-examples ${{ matrix.EXTRA_OPTS }} && make
-      - name: Print errors 
+      - name: Print errors
         if: ${{ failure() }}
         run: |
           if [ -f config.log ] ; then

.github/workflows/multi-compiler.yml

@@ -21,35 +21,35 @@ jobs:
         include:
           - CC: gcc-9
             CXX: g++-9
-            OS: ubuntu-latest
+            OS: ubuntu-24.04
           - CC: gcc-10
             CXX: g++-10
-            OS: ubuntu-latest
+            OS: ubuntu-24.04
           - CC: gcc-11
             CXX: g++-11
-            OS: ubuntu-latest
+            OS: ubuntu-24.04
           - CC: gcc-12
             CXX: g++-12
-            OS: ubuntu-latest
-          - CC: clang-10
-            CXX: clang++-10
-            OS: ubuntu-20.04
+            OS: ubuntu-24.04
           - CC: clang-11
             CXX: clang++-11
-            OS: ubuntu-20.04
+            OS: ubuntu-22.04
           - CC: clang-12
             CXX: clang++-12
-            OS: ubuntu-20.04
+            OS: ubuntu-22.04
           - CC: clang-13
             CXX: clang++-13
-            OS: ubuntu-latest
+            OS: ubuntu-22.04
           - CC: clang-14
             CXX: clang++-14
-            OS: ubuntu-latest
+            OS: ubuntu-24.04
+    if: github.repository_owner == 'wolfssl'
     runs-on: ${{ matrix.OS }}
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     steps:
+      - name: Install dependencies
+        run: export DEBIAN_FRONTEND=noninteractive && sudo apt-get update && sudo apt-get install -y ${{ matrix.CC }}
       - uses: actions/checkout@v4
       - name: Build
         env:

.github/workflows/net-snmp.yml

@@ -15,8 +15,9 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     steps:
@@ -27,11 +28,14 @@ jobs:
           configure: --enable-net-snmp
           install: true
 
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-net-snmp
-          path: build-dir
+          path: build-dir.tgz
           retention-days: 5
 
   net-snmp_check:
@@ -43,7 +47,8 @@ jobs:
           - ref: 5.9.3
             test_opts: -e 'agentxperl'
     name: ${{ matrix.ref }}
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     needs: build_wolfssl
@@ -52,8 +57,10 @@ jobs:
         uses: actions/download-artifact@v4
         with:
           name: wolf-install-net-snmp
-          path: build-dir
-    
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
       - name: Checkout OSP
         uses: actions/checkout@v4
         with:

.github/workflows/nginx.yml

@@ -15,8 +15,9 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     steps:
@@ -33,11 +34,14 @@ jobs:
           configure: --enable-nginx ${{ env.wolf_debug_flags }}
           install: true
 
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-nginx
-          path: build-dir
+          path: build-dir.tgz
           retention-days: 5
 
   nginx_check:
@@ -93,7 +97,7 @@ jobs:
               stream_ssl_preread.t stream_ssl_realip.t stream_ssl_session_reuse.t stream_ssl.t
               stream_ssl_variables.t stream_ssl_verify_client.t stream_upstream_zone_ssl.t
               upstream_zone_ssl.t uwsgi_ssl_certificate.t uwsgi_ssl_certificate_vars.t
-              uwsgi_ssl.t uwsgi_ssl_verify.t 
+              uwsgi_ssl.t uwsgi_ssl_verify.t
             # Following tests do not pass with sanitizer on (with OpenSSL too)
             sanitize-not-ok: >-
               grpc_ssl.t h2_proxy_request_buffering_ssl.t h2_proxy_ssl.t
@@ -102,7 +106,8 @@ jobs:
               stream_proxy_protocol_ssl.t stream_proxy_ssl_conf_command.t stream_proxy_ssl.t
               stream_proxy_ssl_verify.t
     name: ${{ matrix.ref }}
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 6
     needs: build_wolfssl
@@ -111,7 +116,9 @@ jobs:
         uses: actions/download-artifact@v4
         with:
           name: wolf-install-nginx
-          path: build-dir
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
 
       - name: Install dependencies
         run: |
@@ -216,4 +223,4 @@ jobs:
           LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$GITHUB_WORKSPACE/build-dir/lib \
             TMPDIR=$GITHUB_WORKSPACE TEST_NGINX_BINARY=../nginx/objs/nginx \
             prove ${{ matrix.sanitize-ok }}
- 
+

.github/workflows/no-malloc.yml

@@ -18,10 +18,11 @@ jobs:
       matrix:
         config: [
           # Add new configs here
-          '--enable-rsa --enable-keygen --disable-dh CFLAGS="-DWOLFSSL_NO_MALLOC"',
+          '--enable-rsa --enable-keygen --disable-dh CFLAGS="-DWOLFSSL_NO_MALLOC -DRSA_MIN_SIZE=1024"',
         ]
     name: make check
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 6
     steps:
@@ -35,7 +36,7 @@ jobs:
           make
           ./wolfcrypt/test/testwolfcrypt
 
-      - name: Print errors 
+      - name: Print errors
         if: ${{ failure() }}
         run: |
           if [ -f test-suite.log ] ; then

.github/workflows/nss.sh

@@ -0,0 +1,27 @@
+#!/usr/bin/env bash
+
+set -e
+set -x
+
+# Setup nss cert db
+mkdir nssdb
+./dist/Debug/bin/certutil -d nssdb -N --empty-password
+./dist/Debug/bin/certutil -d nssdb  -A -a -i  wolfssl/certs/test/server-localhost.pem \
+    -t TCP -n 'wolf localhost'
+
+# App data for nss
+echo Hello from nss > /tmp/in
+
+# TLS 1.3 test
+env -C wolfssl ./examples/server/server -v 4 -p 4433 \
+    -c certs/test/server-localhost.pem -d -w > /tmp/server.log 2>&1 &
+sleep 0.1
+./dist/Debug/bin/tstclnt -V tls1.3: -h localhost -p 4433 -d nssdb -C -4 -A /tmp/in -v
+sleep 0.1
+
+# DTLS 1.3 test
+env -C wolfssl ./examples/server/server -v 4 -p 4433 -u \
+    -c certs/test/server-localhost.pem -d -w > /tmp/server.log 2>&1 &
+sleep 0.1
+./dist/Debug/bin/tstclnt -V tls1.3: -P client -h localhost -p 4433 -d nssdb -C -4 -A /tmp/in -v
+sleep 0.1

.github/workflows/nss.yml

@@ -0,0 +1,89 @@
+name: nss interop Tests
+
+### TODO uncomment stuff
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+env:
+  NSS_REF: NSS_3_107_RTM
+
+jobs:
+  build_nss:
+    name: Build nss
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 30
+    steps:
+      - name: Checking if we have nss in cache
+        uses: actions/cache@v4
+        id: cache
+        with:
+          path: dist
+          key: nss-${{ env.NSS_REF }}
+          lookup-only: true
+
+      - name: Install dependencies
+        if: steps.cache.outputs.cache-hit != 'true'
+        run: |
+          # Don't prompt for anything
+          export DEBIAN_FRONTEND=noninteractive
+          sudo apt-get update
+          # hostap dependencies
+          sudo apt-get install -y gyp ninja-build
+
+      - name: Checkout nss
+        if: steps.cache.outputs.cache-hit != 'true'
+        uses: actions/checkout@v4
+        with:
+          repository: nss-dev/nss
+          ref: ${{ env.NSS_REF }}
+          path: nss
+
+      - name: Compile nss
+        if: steps.cache.outputs.cache-hit != 'true'
+        run: |
+          hg clone https://hg.mozilla.org/projects/nspr
+          cd nss
+          ./build.sh
+
+  nss_test:
+    name: Test interop with nss
+    runs-on: ubuntu-22.04
+    needs: build_nss
+    timeout-minutes: 10
+    if: github.repository_owner == 'wolfssl'
+    steps:
+      - name: Checking if we have nss in cache
+        uses: actions/cache/restore@v4
+        id: cache
+        with:
+          path: dist
+          key: nss-${{ env.NSS_REF }}
+          fail-on-cache-miss: true
+
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-dtls --enable-dtls13
+          install: false
+          check: false
+
+      - name: Test interop
+        run: bash wolfssl/.github/workflows/nss.sh
+
+      - name: print server logs
+        if: ${{ failure() }}
+        run: |
+          cat /tmp/server.log

.github/workflows/ntp.yml

@@ -0,0 +1,93 @@
+name: ntp Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-all
+          install: true
+          check: false
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-ntp
+          path: build-dir.tgz
+          retention-days: 5
+
+  ntp_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        # List of releases to test
+        ref: [ 4.2.8p15, 4.2.8p17 ]
+    name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 10
+    needs: build_wolfssl
+    steps:
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-ntp
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      # Avoid DoS'ing ntp site so cache the tar.gz
+      - name: Check if we have ntp
+        uses: actions/cache@v4
+        id: cache
+        with:
+          path: ntp-${{ matrix.ref }}.tar.gz
+          key: ntp-${{ matrix.ref }}.tar.gz
+
+      - name: Download ntp
+        if: steps.cache.outputs.cache-hit != 'true'
+        run: |
+          wget https://downloads.nwtime.org/ntp/4.2.8/ntp-${{ matrix.ref }}.tar.gz
+
+      - name: Extract ntp
+        run: |
+          tar -xf ntp-${{ matrix.ref }}.tar.gz
+
+      - name: Build and test ntp
+        working-directory: ntp-${{ matrix.ref }}
+        run: |
+          patch -p1 < $GITHUB_WORKSPACE/osp/ntp/${{ matrix.ref }}/ntp-${{ matrix.ref }}.patch
+          ./bootstrap
+          ./configure --with-wolfssl=$GITHUB_WORKSPACE/build-dir
+          make -j
+          make -j check

.github/workflows/ocsp.yml

@@ -15,7 +15,8 @@ concurrency:
 jobs:
   ocsp_stapling:
     name: ocsp stapling
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     timeout-minutes: 10
     steps:
       - name: Checkout wolfSSL

.github/workflows/openldap.yml

@@ -0,0 +1,91 @@
+name: openldap Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-openldap CPPFLAGS=-DWOLFSSL_NO_ASN_STRICT
+          install: true
+          check: true
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-openldap
+          path: build-dir.tgz
+          retention-days: 5
+
+  openldap_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          # List of releases to test
+          - osp_ref: 2.5.13
+            git_ref: OPENLDAP_REL_ENG_2_5_13
+          - osp_ref: 2.6.7
+            git_ref: OPENLDAP_REL_ENG_2_6_7
+    name: ${{ matrix.osp_ref }}
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 20
+    needs: build_wolfssl
+    steps:
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-openldap
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Checkout openldap
+        uses: actions/checkout@v4
+        with:
+          repository: openldap/openldap
+          path: openldap
+          ref: ${{ matrix.git_ref }}
+
+      - name: Build and test OpenLDAP
+        working-directory: openldap
+        run: |
+          export LD_LIBRARY_PATH=$GITHUB_WORKSPACE/build-dir/lib:$LD_LIBRARY_PATH
+          patch -p1 < $GITHUB_WORKSPACE/osp/openldap/${{ matrix.osp_ref }}/openldap-${{ matrix.osp_ref }}.patch
+          rm aclocal.m4
+          autoreconf -ivf
+          ./configure --with-tls=wolfssl --disable-bdb --disable-hdb \
+            CFLAGS="-I$GITHUB_WORKSPACE/build-dir/include \
+              -I$GITHUB_WORKSPACE/build-dir/include/wolfssl \
+              -L$GITHUB_WORKSPACE/build-dir/lib"
+          make -j depend
+          make -j
+          make -j check

.github/workflows/openssh.yml

@@ -15,8 +15,9 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     steps:
@@ -26,14 +27,17 @@ jobs:
           path: wolfssl
           configure: >-
             --enable-openssh --enable-dsa --with-max-rsa-bits=8192
-            --enable-intelasm --enable-sp-asm
+            --enable-intelasm --enable-sp-asm CFLAGS="-DRSA_MIN_SIZE=1024"
           install: true
 
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-openssh
-          path: build-dir
+          path: build-dir.tgz
           retention-days: 5
 
   openssh_check:
@@ -44,14 +48,17 @@ jobs:
           - git_ref: 'V_9_6_P1'
             osp_ver: '9.6'
     name: ${{ matrix.ref }}
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     needs: build_wolfssl
     steps:
       - name: Download lib
         uses: actions/download-artifact@v4
         with:
           name: wolf-install-openssh
-          path: build-dir
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
 
       - name: Checkout OSP
         uses: actions/checkout@v4
@@ -69,7 +76,7 @@ jobs:
           configure: --with-wolfssl=$GITHUB_WORKSPACE/build-dir --with-rpath=-Wl,-rpath=
           check: false
 
-      # make tests take >20 minutes. Consider limiting? 
+      # make tests take >20 minutes. Consider limiting?
       - name: Run tests
         working-directory: ./openssh
         run: |

.github/workflows/opensslcoexist.yml

@@ -0,0 +1,50 @@
+name: OPENSSL_COEXIST and TEST_OPENSSL_COEXIST
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  make_check:
+    strategy:
+      matrix:
+        config: [
+          # Add new configs here
+          '--verbose --enable-all --disable-all-osp --disable-opensslall --enable-opensslcoexist CPPFLAGS="-DNO_WOLFSSL_CIPHER_SUITE_TEST -pedantic"',
+          '--verbose --enable-all --disable-all-osp --disable-opensslall --enable-opensslcoexist CPPFLAGS="-DNO_WOLFSSL_CIPHER_SUITE_TEST -pedantic -DTEST_OPENSSL_COEXIST"'
+        ]
+    name: make check
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 6
+    steps:
+      - uses: actions/checkout@v4
+        name: Checkout wolfSSL
+
+      - name: Test --enable-opensslcoexist and TEST_OPENSSL_COEXIST
+        run: |
+          ./autogen.sh || $(exit 2)
+          ./configure ${{ matrix.config }} || $(exit 3)
+          make -j 4 || $(exit 4)
+          make check
+
+      - name: Print errors
+        if: ${{ failure() }}
+        run: |
+          for file in config.log scripts/*.log
+          do
+              if [ -f "$file" ]; then
+                  echo "${file}:"
+                  cat "$file"
+                  echo "========================================================================"
+              fi
+          done

.github/workflows/openvpn.yml

@@ -15,8 +15,9 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     steps:
@@ -27,11 +28,14 @@ jobs:
           configure: --enable-openvpn
           install: true
 
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-openvpn
-          path: build-dir
+          path: build-dir.tgz
           retention-days: 5
 
   openvpn_check:
@@ -39,9 +43,10 @@ jobs:
       fail-fast: false
       matrix:
         # List of refs to test
-        ref: [ release/2.6, v2.6.0, master ]
+        ref: [ release/2.6, master ]
     name: ${{ matrix.ref }}
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 10
     needs: build_wolfssl
@@ -50,7 +55,9 @@ jobs:
         uses: actions/download-artifact@v4
         with:
           name: wolf-install-openvpn
-          path: build-dir
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
 
       - name: Install dependencies
         run: |

.github/workflows/os-check.yml

@@ -17,7 +17,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        os: [ ubuntu-latest, macos-latest ]
+        os: [ ubuntu-22.04, macos-latest ]
         config: [
           # Add new configs here
           '',
@@ -25,16 +25,26 @@ jobs:
           '--enable-all --enable-asn=original',
           '--enable-harden-tls',
           '--enable-tls13 --enable-session-ticket --enable-dtls --enable-dtls13
-             --enable-opensslextra --enable-sessioncerts 
-             CPPFLAGS=''-DWOLFSSL_DTLS_NO_HVR_ON_RESUME -DHAVE_EXT_CACHE 
+             --enable-opensslextra --enable-sessioncerts
+             CPPFLAGS=''-DWOLFSSL_DTLS_NO_HVR_ON_RESUME -DHAVE_EXT_CACHE
              -DWOLFSSL_TICKET_HAVE_ID -DHAVE_EX_DATA -DSESSION_CACHE_DYNAMIC_MEM'' ',
           '--enable-all --enable-secure-renegotiation',
           '--enable-all --enable-haproxy --enable-quic',
-          '--enable-dtls --enable-dtls13 --enable-earlydata 
-             --enable-session-ticket --enable-psk 
+          '--enable-dtls --enable-dtls13 --enable-earlydata
+             --enable-session-ticket --enable-psk
              CPPFLAGS=''-DWOLFSSL_DTLS13_NO_HRR_ON_RESUME'' ',
+          '--enable-experimental --enable-kyber --enable-dtls --enable-dtls13
+             --enable-dtls-frag-ch',
+          '--enable-all --enable-dtls13 --enable-dtls-frag-ch',
+          '--enable-dtls --enable-dtls13 --enable-dtls-frag-ch
+           --enable-dtls-mtu',
+          '--enable-dtls --enable-dtlscid --enable-dtls13 --enable-secure-renegotiation
+            --enable-psk --enable-aesccm --enable-nullcipher CPPFLAGS=-DWOLFSSL_STATIC_RSA',
+          '--enable-ascon --enable-experimental',
+          '--enable-ascon CPPFLAGS=-DWOLFSSL_ASCON_UNROLL --enable-experimental',
         ]
     name: make check
+    if: github.repository_owner == 'wolfssl'
     runs-on: ${{ matrix.os }}
     # This should be a safe limit for the tests to run.
     timeout-minutes: 14
@@ -49,12 +59,13 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        os: [ ubuntu-latest, macos-latest ]
+        os: [ ubuntu-22.04, macos-latest ]
         user-settings: [
           # Add new user_settings.h here
           'examples/configs/user_settings_all.h',
         ]
     name: make user_setting.h
+    if: github.repository_owner == 'wolfssl'
     runs-on: ${{ matrix.os }}
     # This should be a safe limit for the tests to run.
     timeout-minutes: 14
@@ -70,9 +81,10 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        os: [ ubuntu-latest, macos-latest ]
+        os: [ ubuntu-22.04, macos-latest ]
         user-settings: [
           # Add new user_settings.h here
+          'examples/configs/user_settings_eccnonblock.h',
           'examples/configs/user_settings_min_ecc.h',
           'examples/configs/user_settings_wolfboot_keytools.h',
           'examples/configs/user_settings_wolftpm.h',
@@ -80,6 +92,7 @@ jobs:
           'examples/configs/user_settings_tls12.h',
         ]
     name: make user_setting.h (testwolfcrypt only)
+    if: github.repository_owner == 'wolfssl'
     runs-on: ${{ matrix.os }}
     # This should be a safe limit for the tests to run.
     timeout-minutes: 14
@@ -99,8 +112,9 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        os: [ ubuntu-latest, macos-latest ]
+        os: [ ubuntu-22.04, macos-latest ]
     name: make user_setting.h (with sed)
+    if: github.repository_owner == 'wolfssl'
     runs-on: ${{ matrix.os }}
     # This should be a safe limit for the tests to run.
     timeout-minutes: 14
@@ -119,7 +133,12 @@ jobs:
 
   windows_build:
     name: Windows Build Test
+    if: github.repository_owner == 'wolfssl'
     runs-on: windows-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        arch: [ x64, Win32, ARM64 ]
     # This should be a safe limit for the tests to run.
     timeout-minutes: 6
     env:
@@ -130,7 +149,6 @@ jobs:
       # You can convert this to a build matrix if you need coverage of multiple configuration types.
       # https://docs.github.com/actions/learn-github-actions/managing-complex-workflows#using-a-build-matrix
       BUILD_CONFIGURATION: Release
-      BUILD_PLATFORM: x64
     steps:
     - uses: actions/checkout@v4
 
@@ -145,8 +163,9 @@ jobs:
       working-directory: ${{env.GITHUB_WORKSPACE}}
       # Add additional options to the MSBuild command line here (like platform or verbosity level).
       # See https://docs.microsoft.com/visualstudio/msbuild/msbuild-command-line-reference
-      run: msbuild /m /p:PlatformToolset=v142 /p:Platform=${{env.BUILD_PLATFORM}} /p:Configuration=${{env.BUILD_CONFIGURATION}} ${{env.SOLUTION_FILE_PATH}}
+      run: msbuild /m /p:PlatformToolset=v142 /p:Platform=${{matrix.arch}} /p:Configuration=${{env.BUILD_CONFIGURATION}} ${{env.SOLUTION_FILE_PATH}}
 
-    - name: Run Test
+    - if: ${{ matrix.arch != 'ARM64' }}
+      name: Run Test
       working-directory: ${{env.GITHUB_WORKSPACE}}
-      run: Release/x64/testsuite.exe
+      run: Release/${{matrix.arch}}/testsuite.exe

.github/workflows/packaging.yml

@@ -15,7 +15,8 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Package wolfSSL
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 10
     steps:
@@ -37,8 +38,9 @@ jobs:
       - name: Build wolfSSL .deb
         run: make deb-docker
 
-      - name: Build wolfSSL .rpm
-        run: make rpm-docker
+# disabled 20240919 -- broken target.
+#      - name: Build wolfSSL .rpm
+#        run: make rpm-docker
 
       - name: Confirm packages built
         run: |
@@ -47,8 +49,9 @@ jobs:
             echo Did not find exactly two deb packages!!!
             exit 1
           fi
-          RPM_COUNT=$(find -name 'wolfssl*.rpm' | wc -l)
-          if [ "$RPM_COUNT" != "4" ]; then
-            echo Did not find exactly four rpm packages!!!
-            exit 1
-          fi
+# disabled 20240919 -- broken target.
+#          RPM_COUNT=$(find -name 'wolfssl*.rpm' | wc -l)
+#          if [ "$RPM_COUNT" != "4" ]; then
+#            echo Did not find exactly four rpm packages!!!
+#            exit 1
+#          fi

.github/workflows/pam-ipmi.yml

@@ -16,8 +16,9 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     steps:
@@ -30,11 +31,14 @@ jobs:
           # Don't run tests as this config is tested in many other places
           check: false
 
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-pam-ipmi
-          path: build-dir
+          path: build-dir.tgz
           retention-days: 5
 
   build_pam-ipmi:
@@ -43,7 +47,8 @@ jobs:
       matrix:
         git_ref: [ e4b13e6725abb178f62ee897fe1c0e81b06a9431 ]
     name: ${{ matrix.git_ref }}
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     needs: build_wolfssl
     steps:
       - name: Install dependencies
@@ -51,14 +56,15 @@ jobs:
           # Don't prompt for anything
           export DEBIAN_FRONTEND=noninteractive
           sudo apt-get update
-          sudo apt-get install libpam-dev ninja-build
-          sudo pip3 install meson
+          sudo apt-get install libpam-dev ninja-build meson
 
       - name: Download lib
         uses: actions/download-artifact@v4
         with:
           name: wolf-install-pam-ipmi
-          path: build-dir
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
 
       - name: Checkout OSP
         uses: actions/checkout@v4

.github/workflows/pq-all.yml

@@ -0,0 +1,50 @@
+name: Quantum Resistant Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  make_check:
+    strategy:
+      matrix:
+        config: [
+          # Add new configs here
+          '--enable-intelasm --enable-sp-asm --enable-all --enable-testcert --enable-acert --enable-dtls13 --enable-dtls-mtu --enable-dtls-frag-ch --enable-dtlscid --enable-quic --with-sys-crypto-policy --enable-experimental --enable-kyber=yes,original --enable-lms --enable-xmss --enable-dilithium --enable-dual-alg-certs --disable-qt CPPFLAGS="-pedantic -Wdeclaration-after-statement -DWOLFCRYPT_TEST_LINT -DNO_WOLFSSL_CIPHER_SUITE_TEST -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE"',
+          '--enable-intelasm --enable-sp-asm --enable-all --enable-testcert --enable-acert --enable-dtls13 --enable-dtls-mtu --enable-dtls-frag-ch --enable-dtlscid --enable-quic --with-sys-crypto-policy --enable-experimental --enable-kyber=yes,original --enable-lms --enable-xmss --enable-dilithium --enable-dual-alg-certs --disable-qt CPPFLAGS="-pedantic -Wdeclaration-after-statement -DWOLFCRYPT_TEST_LINT -DNO_WOLFSSL_CIPHER_SUITE_TEST -DTEST_LIBWOLFSSL_SOURCES_INCLUSION_SEQUENCE" CC=c++'
+        ]
+    name: make check
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 6
+    steps:
+      - uses: actions/checkout@v4
+        name: Checkout wolfSSL
+
+      - name: Test wolfSSL
+        run: |
+          ./autogen.sh
+          ./configure ${{ matrix.config }}
+          make -j 4
+          make check
+
+      - name: Print errors
+        if: ${{ failure() }}
+        run: |
+          for file in scripts/*.log
+          do
+              if [ -f "$file" ]; then
+                  echo "${file}:"
+                  cat "$file"
+                  echo "========================================================================"
+              fi
+          done

.github/workflows/rng-tools.yml

@@ -0,0 +1,116 @@
+name: rng-tools Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-all
+          install: true
+          check: false
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-rng-tools
+          path: build-dir.tgz
+          retention-days: 5
+
+  rng-tools_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        # List of releases to test
+        ref: [ 6.16 ]
+    name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    needs: build_wolfssl
+    steps:
+      - name: Install dependencies
+        run: |
+          # Don't prompt for anything
+          export DEBIAN_FRONTEND=noninteractive
+          sudo apt-get update
+          sudo apt-get install -y libcurl4-openssl-dev libjansson-dev libp11-dev librtlsdr-dev libcap-dev
+
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-rng-tools
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Checkout jitterentropy-library
+        uses: actions/checkout@v4
+        with:
+          repository: smuellerDD/jitterentropy-library
+          path: jitterentropy-library
+          ref: v3.5.0
+
+      - name: Build jitterentropy-library
+        working-directory: jitterentropy-library
+        run: make -j
+
+      - name: Build rng-tools
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          repository: nhorman/rng-tools
+          ref: v${{ matrix.ref }}
+          path: rng-tools
+          patch-file: $GITHUB_WORKSPACE/osp/rng-tools/${{ matrix.ref }}.patch
+          configure: --without-pkcs11 --enable-jitterentropy=$GITHUB_WORKSPACE/jitterentropy-library --with-wolfssl=$GITHUB_WORKSPACE/build-dir
+          check: false
+
+      - name: Testing rng-tools
+        id: testing
+        working-directory: rng-tools
+        run: |
+          # Retry up to five times
+          for i in {1..5}; do
+            TEST_RES=0
+            LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$GITHUB_WORKSPACE/build-dir/lib make check || TEST_RES=$?
+            if [ "$TEST_RES" -eq "0" ]; then
+               break
+            fi
+          done
+          if [ "$TEST_RES" -ne "0" ]; then
+            exit $TEST_RES
+          fi
+
+      - name: Print logs
+        if: ${{ failure() && steps.testing.outcome == 'failure' }}
+        working-directory: rng-tools/tests
+        run: cat test-suite.log

.github/workflows/socat.yml

@@ -15,7 +15,8 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     timeout-minutes: 4
     steps:
       - name: Build wolfSSL
@@ -25,18 +26,20 @@ jobs:
           configure: --enable-maxfragment --enable-opensslall --enable-opensslextra --enable-dtls --enable-oldtls --enable-tlsv10 --enable-ipv6 'CPPFLAGS=-DWOLFSSL_NO_DTLS_SIZE_CHECK -DOPENSSL_COMPATIBLE_DEFAULTS'
           install: true
 
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-socat
-          path: build-dir
-          retention-days: 3
+          path: build-dir.tgz
+          retention-days: 5
 
 
   socat_check:
-    strategy:
-      fail-fast: false
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 30
     needs: build_wolfssl
@@ -49,7 +52,9 @@ jobs:
         uses: actions/download-artifact@v4
         with:
           name: wolf-install-socat
-          path: build-dir
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
 
       - name: Download socat
         run: curl -O http://www.dest-unreach.org/socat/download/socat-1.8.0.0.tar.gz && tar xvf socat-1.8.0.0.tar.gz
@@ -65,7 +70,7 @@ jobs:
         run: |
           patch -p1 < ../osp/socat/1.8.0.0/socat-1.8.0.0.patch
           autoreconf -vfi
-          ./configure --with-wolfssl=$GITHUB_WORKSPACE/build-dir
+          ./configure --with-wolfssl=$GITHUB_WORKSPACE/build-dir --enable-default-ipv=4
           make
 
       - name: Run socat tests
@@ -73,4 +78,4 @@ jobs:
         run: |
           export LD_LIBRARY_PATH=$GITHUB_WORKSPACE/build-dir/lib:$LD_LIBRARY_PATH
           export SHELL=/bin/bash
-          SOCAT=$GITHUB_WORKSPACE/socat-1.8.0.0/socat ./test.sh -t 0.5 --expect-fail 146,216,309,310,386,399,402,459,460,467,468,478,492,528,530
+          SOCAT=$GITHUB_WORKSPACE/socat-1.8.0.0/socat ./test.sh -t 0.5 --expect-fail 36,64,146,214,216,217,309,310,386,399,402,403,459,460,467,468,475,478,492,528,530

.github/workflows/softhsm.yml

@@ -0,0 +1,94 @@
+name: SoftHSMv2 Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 10
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-all CFLAGS=-DRSA_MIN_SIZE=1024
+          install: true
+          check: false
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-softhsm
+          path: build-dir.tgz
+          retention-days: 5
+
+  softhsm_check:
+    strategy:
+      fail-fast: false
+      matrix:
+        # List of releases to test
+        ref: [ 2.6.1 ]
+    name: ${{ matrix.ref }}
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 20
+    needs: build_wolfssl
+    steps:
+      - name: Install dependencies
+        run: |
+          # Don't prompt for anything
+          export DEBIAN_FRONTEND=noninteractive
+          sudo apt-get update
+          sudo apt-get install -y libcppunit-dev
+
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-softhsm
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Checkout SoftHSMv2
+        uses: actions/checkout@v4
+        with:
+          repository: opendnssec/SoftHSMv2
+          path: softhsm
+          ref: ${{ matrix.ref }}
+
+      # Not using wolfSSL/actions-build-autotools-project@v1 because autogen.sh doesn't work
+      - name: Build softhsm
+        working-directory: softhsm
+        run: |
+          patch -p1 < $GITHUB_WORKSPACE/osp/softhsm/${{ matrix.ref }}.patch
+          autoreconf -if
+          ./configure --with-crypto-backend=wolfssl WOLFSSL_INSTALL_DIR=$GITHUB_WORKSPACE/build-dir
+          make -j
+
+      - name: Test softhsm
+        working-directory: softhsm
+        run: make -j check

.github/workflows/sssd.yml

@@ -0,0 +1,99 @@
+name: sssd Tests
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_wolfssl:
+    if: github.repository_owner == 'wolfssl'
+    name: Build wolfSSL
+    # Just to keep it the same as the testing target
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 4
+    steps:
+      - name: Build wolfSSL
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          path: wolfssl
+          configure: --enable-all CFLAGS=-DWOLFSSL_NO_ASN_STRICT
+          install: true
+          check: false
+
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
+      - name: Upload built lib
+        uses: actions/upload-artifact@v4
+        with:
+          name: wolf-install-sssd
+          path: build-dir.tgz
+          retention-days: 5
+
+  sssd_check:
+    if: github.repository_owner == 'wolfssl'
+    strategy:
+      fail-fast: false
+      matrix:
+        # List of releases to test
+        ref: [ 2.9.1 ]
+    name: ${{ matrix.ref }}
+    runs-on: ubuntu-22.04
+    container:
+      image: quay.io/sssd/ci-client-devel:ubuntu-latest
+      env:
+        LD_LIBRARY_PATH: /usr/local/lib
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 20
+    needs: build_wolfssl
+    steps:
+      - name: Install dependencies
+        run: |
+          # Don't prompt for anything
+          export DEBIAN_FRONTEND=noninteractive
+          sudo apt-get update
+          sudo apt-get install -y build-essential autoconf libldb-dev libldb2 python3-ldb bc
+
+      - name: Setup env
+        run: |
+          ln -s samba-4.0/ldb.h /usr/include/ldb.h
+          ln -s samba-4.0/ldb_errors.h /usr/include/ldb_errors.h
+          ln -s samba-4.0/ldb_handlers.h /usr/include/ldb_handlers.h
+          ln -s samba-4.0/ldb_module.h /usr/include/ldb_module.h
+          ln -s samba-4.0/ldb_version.h /usr/include/ldb_version.h
+
+      - name: Download lib
+        uses: actions/download-artifact@v4
+        with:
+          name: wolf-install-sssd
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
+      - name: Checkout OSP
+        uses: actions/checkout@v4
+        with:
+          repository: wolfssl/osp
+          path: osp
+
+      - name: Build and test sssd
+        uses: wolfSSL/actions-build-autotools-project@v1
+        with:
+          repository: SSSD/sssd
+          ref: ${{ matrix.ref }}
+          path: sssd
+          patch-file: $GITHUB_WORKSPACE/osp/sssd/${{ matrix.ref }}.patch
+          configure: >-
+            --without-samba --without-nfsv4-idmapd-plugin --with-oidc-child=no
+            --without-manpages WOLFSSL_INSTALL_DIR=$GITHUB_WORKSPACE/build-dir
+          check: true
+

.github/workflows/stunnel.yml

@@ -15,8 +15,9 @@ concurrency:
 jobs:
   build_wolfssl:
     name: Build wolfSSL
+    if: github.repository_owner == 'wolfssl'
     # Just to keep it the same as the testing target
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     steps:
@@ -27,11 +28,14 @@ jobs:
           configure: --enable-stunnel
           install: true
 
+      - name: tar build-dir
+        run: tar -zcf build-dir.tgz build-dir
+
       - name: Upload built lib
         uses: actions/upload-artifact@v4
         with:
           name: wolf-install-stunnel
-          path: build-dir
+          path: build-dir.tgz
           retention-days: 5
 
   stunnel_check:
@@ -41,7 +45,8 @@ jobs:
         # List of releases to test
         ref: [ 5.67 ]
     name: ${{ matrix.ref }}
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 4
     needs: build_wolfssl
@@ -50,8 +55,10 @@ jobs:
         uses: actions/download-artifact@v4
         with:
           name: wolf-install-stunnel
-          path: build-dir
-    
+
+      - name: untar build-dir
+        run: tar -xf build-dir.tgz
+
       - name: Checkout OSP
         uses: actions/checkout@v4
         with:

.github/workflows/watcomc.yml

@@ -0,0 +1,84 @@
+name: Build Watcom C
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  wolfssl_watcomc_windows:
+    if: github.repository_owner == 'wolfssl'
+    strategy:
+      fail-fast: false
+      matrix:
+        common:
+          - cmake:    '-G "Watcom WMake" -DCMAKE_VERBOSE_MAKEFILE=TRUE -DWOLFSSL_ASM=no -DWOLFSSL_EXAMPLES=no -DWOLFSSL_CRYPT_TESTS=no'
+        platform:
+          - title:   'Windows OW 2.0'
+            system:   'Windows'
+            image:    'windows-latest'
+            owimage:  '2.0'
+            id:       'win32ow20'
+            cmake:    '-DCMAKE_SYSTEM_NAME=Windows -DCMAKE_SYSTEM_PROCESSOR=x86'
+          - title:   'Linux OW 2.0'
+            system:   'Linux'
+            image:    'ubuntu-latest'
+            owimage:  '2.0'
+            id:       'linuxow20'
+            cmake:    '-DCMAKE_SYSTEM_NAME=Linux -DCMAKE_SYSTEM_PROCESSOR=x86'
+          - title:   'OS/2 OW 2.0'
+            system:   'OS2'
+            image:    'windows-latest'
+            owimage:  '2.0'
+            id:       'os2ow20'
+            cmake:    '-DCMAKE_SYSTEM_NAME=OS2 -DCMAKE_SYSTEM_PROCESSOR=x86'
+        thread:
+          - id:       'multi'
+            cmake:    ''
+            owcmake:  '-DCMAKE_POLICY_DEFAULT_CMP0136=NEW -DCMAKE_WATCOM_RUNTIME_LIBRARY=MultiThreaded'
+          - id:       'single'
+            cmake:    '-DWOLFSSL_SINGLE_THREADED=yes'
+            owcmake:  '-DCMAKE_POLICY_DEFAULT_CMP0136=NEW -DCMAKE_WATCOM_RUNTIME_LIBRARY=SingleThreaded'
+        library:
+          - id:       'dll'
+            cmake:    ''
+            owcmake:  'DLL'
+          - id:       'static'
+            cmake:    '-DBUILD_SHARED_LIBS=no'
+            owcmake:  ''
+        exclude:
+          - { platform: { system: 'Linux' }, library: { id: 'dll' } }
+    runs-on: ${{ matrix.platform.image }}
+    name: ${{ matrix.platform.title }} (${{ matrix.thread.id }} ${{ matrix.library.id }})
+    steps:
+      - name: Setup Open Watcom ${{ matrix.platform.owimage }}
+        uses: open-watcom/setup-watcom@v0
+        with:
+          version: ${{ matrix.platform.owimage }}
+
+      - name: Checkout wolfSSL
+        uses: actions/checkout@v4
+        with:
+          path: wolfssl
+
+      - name: Build wolfSSL
+        working-directory: wolfssl
+        shell: bash
+        run: |
+          cmake -B build ${{matrix.common.cmake}} ${{ matrix.platform.cmake }} ${{ matrix.thread.cmake }} ${{ matrix.library.cmake }} ${{ matrix.thread.owcmake }}${{ matrix.library.owcmake }}
+          cmake --build build
+
+      - name: Upload build errors
+        if: failure()
+        uses: actions/upload-artifact@v4
+        with:
+          name: ${{ matrix.platform.id }}-${{ matrix.thread.id }}-${{ matrix.library.id }}
+          path: |
+            build/**

.github/workflows/win-csharp-test.yml

@@ -0,0 +1,58 @@
+name: Windows CSharp Build Test
+
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+jobs:
+  build:
+
+    if: github.repository_owner == 'wolfssl'
+    runs-on: windows-latest
+
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 6
+
+    env:
+      # Path to the solution file relative to the root of the project.
+      SOLUTION_FILE_PATH: wolfssl\wrapper\CSharp\wolfSSL_CSharp.sln
+
+      # Configuration type to build.
+      # You can convert this to a build matrix if you need coverage of multiple configuration types.
+      # https://docs.github.com/actions/learn-github-actions/managing-complex-workflows#using-a-build-matrix
+      BUILD_CONFIGURATION: Debug
+      BUILD_PLATFORM: x64
+
+    steps:
+        - name: Pull wolfssl
+          uses: actions/checkout@master
+          with:
+            repository: wolfssl/wolfssl
+            path: wolfssl
+
+        - name: Create FIPS stub files (autogen)
+          working-directory: wolfssl
+          run: |
+            echo $null >> wolfcrypt\src\fips.c
+            echo $null >> wolfcrypt\src\fips_test.c
+            echo $null >> wolfcrypt\src\wolfcrypt_first.c
+            echo $null >> wolfcrypt\src\wolfcrypt_last.c
+
+        - name: Add MSBuild to PATH
+          uses: microsoft/setup-msbuild@v1
+
+        - name: Build
+          working-directory: ${{env.GITHUB_WORKSPACE}}
+          # Add additional options to the MSBuild command line here (like platform or verbosity level).
+          # See https://docs.microsoft.com/visualstudio/msbuild/msbuild-command-line-reference
+          run: msbuild /m /p:PlatformToolset=v142 /p:Platform=${{env.BUILD_PLATFORM}} /p:Configuration=${{env.BUILD_CONFIGURATION}} ${{env.SOLUTION_FILE_PATH}}
+
+        - name: Run wolfCrypt test
+          working-directory: ${{env.GITHUB_WORKSPACE}}wolfssl\wrapper\CSharp\Debug\x64\
+          run: ./wolfCrypt-test.exe
+
+        - name: Run wolfSSL client/server example
+          working-directory: ${{env.GITHUB_WORKSPACE}}wolfssl\wrapper\CSharp\Debug\x64\
+          run: ./wolfSSL-TLS-Server.exe && sleep 1 & ./wolfSSL-TLS-Client.exe

.github/workflows/wolfCrypt-Wconversion.yml

@@ -0,0 +1,41 @@
+name: wolfCrypt conversion warnings
+
+# START OF COMMON SECTION
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+# END OF COMMON SECTION
+
+jobs:
+  build_library:
+    strategy:
+      matrix:
+        config: [
+          # Add new configs here
+          '--disable-asm --enable-cryptonly --enable-all-crypto --disable-examples --disable-benchmark --disable-crypttests CPPFLAGS="-Wconversion -Warith-conversion -Wenum-conversion -Wfloat-conversion -Wsign-conversion"',
+          '--enable-intelasm --enable-cryptonly --enable-all-crypto --disable-examples --disable-benchmark --disable-crypttests CPPFLAGS="-Wconversion -Warith-conversion -Wenum-conversion -Wfloat-conversion -Wsign-conversion"',
+          '--enable-smallstack --disable-asm --enable-cryptonly --enable-all-crypto --disable-examples --disable-benchmark --disable-crypttests CPPFLAGS="-Wconversion -Warith-conversion -Wenum-conversion -Wfloat-conversion -Wsign-conversion"',
+          '--enable-smallstack --enable-intelasm --enable-cryptonly --enable-all-crypto --disable-examples --disable-benchmark --disable-crypttests CPPFLAGS="-Wconversion -Warith-conversion -Wenum-conversion -Wfloat-conversion -Wsign-conversion"',
+          '--enable-cryptonly --enable-all-crypto --disable-examples --disable-benchmark --disable-crypttests CPPFLAGS="-Wconversion -Warith-conversion -Wenum-conversion -Wfloat-conversion -Wsign-conversion -DNO_INT128"'
+        ]
+    name: build library
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
+    # This should be a safe limit for the tests to run.
+    timeout-minutes: 6
+    steps:
+      - uses: actions/checkout@v4
+        name: Checkout wolfSSL
+
+      - name: Build wolfCrypt with extra type conversion warnings
+        run: |
+          ./autogen.sh || $(exit 2)
+          echo "running ./configure ${{ matrix.config }}"
+          ./configure ${{ matrix.config }} || $(exit 3)
+          make -j 4 || $(exit 4)

.github/workflows/zephyr.yml

@@ -25,7 +25,8 @@ jobs:
             zephyr-sdk: 0.16.3
           - zephyr-ref: v2.7.4
             zephyr-sdk: 0.16.3
-    runs-on: ubuntu-latest
+    if: github.repository_owner == 'wolfssl'
+    runs-on: ubuntu-22.04
     # This should be a safe limit for the tests to run.
     timeout-minutes: 25
     steps:
@@ -45,9 +46,14 @@ jobs:
             libglib2.0-dev libgtk2.0-0 liblocale-gettext-perl libncurses5-dev libpcap-dev \
             libpopt0 libsdl1.2-dev libsdl2-dev libssl-dev libtool libtool-bin locales make \
             net-tools ninja-build openssh-client parallel pkg-config python3-dev python3-pip \
-            python3-ply python3-setuptools python-is-python3 qemu rsync socat srecord sudo \
+            python3-ply python3-setuptools python-is-python3 qemu-kvm rsync socat srecord sudo \
             texinfo unzip wget ovmf xz-utils
 
+      - name: Setup cmake version
+        uses: jwlawson/actions-setup-cmake@v2
+        with:
+          cmake-version: '3.25.x'
+
       - name: Install west
         run: sudo pip install west
 

.gitignore

@@ -10,6 +10,7 @@ ctaocrypt/src/src/
 *.cache
 .dirstamp
 *.user
+!*-VS2022.vcxproj.user
 configure
 config.*
 !cmake/config.in
@@ -245,6 +246,7 @@ linuxkm/libwolfssl.mod.c
 linuxkm/libwolfssl.lds
 linuxkm/module_exports.c
 linuxkm/linuxkm/get_thread_size
+*.nds
 
 # autotools generated
 scripts/unit.test
@@ -413,6 +415,19 @@ user_settings_asm.h
 /IDE/Espressif/**/sdkconfig
 /IDE/Espressif/**/sdkconfig.old
 
+# ESP8266 RTOS SDK has a slightly different sdkconfig filename to exclude:
+/IDE/Espressif/**/sdkconfig.debug
+/IDE/Espressif/**/sdkconfig.release
+/IDE/Espressif/**/sdkconfig-debug
+/IDE/Espressif/**/sdkconfig-release
+
+# Always include Espressif makefiles (typically only used for ESP8266)
+!/IDE/Espressif/**/Makefile
+!/IDE/Espressif/**/component.mk
+
+# Ignore all the example logs
+/IDE/Espressif/ESP-IDF/examples/**/logs/*
+
 # MPLAB
 /IDE/MPLABX16/wolfssl.X/dist/default/
 /IDE/MPLABX16/wolfssl.X/.generated_files
@@ -434,6 +449,12 @@ debian/changelog
 debian/control
 *.deb
 
+# Ada/Alire files
+wrapper/Ada/alire/
+wrapper/Ada/config/
+wrapper/Ada/lib/
+wrapper/Ada/obj/
+
 # PlatformIO
 /**/.pio
 /**/.vscode/.browse.c_cpp.db*
@@ -441,3 +462,7 @@ debian/control
 /**/.vscode/launch.json
 /**/.vscode/ipch
 /**/sdkconfig.esp32dev
+
+# Autogenerated debug trace headers
+wolfssl/debug-trace-error-codes.h
+wolfssl/debug-untrace-error-codes.h

CMakeLists.txt

@@ -34,7 +34,7 @@ if("${CMAKE_SOURCE_DIR}" STREQUAL "${CMAKE_BINARY_DIR}")
      You must delete them, or cmake will refuse to work.")
 endif()
 
-project(wolfssl VERSION 5.7.2 LANGUAGES C ASM)
+project(wolfssl VERSION 5.8.0 LANGUAGES C ASM)
 
 # Set WOLFSSL_ROOT if not already defined
 if ("${WOLFSSL_ROOT}" STREQUAL "")
@@ -49,11 +49,11 @@ endif()
 
 # shared library versioning
 # increment if interfaces have been removed or changed
-set(WOLFSSL_LIBRARY_VERSION_FIRST 42)
+set(WOLFSSL_LIBRARY_VERSION_FIRST 43)
 
 # increment if interfaces have been added
 # set to zero if WOLFSSL_LIBRARY_VERSION_FIRST is incremented
-set(WOLFSSL_LIBRARY_VERSION_SECOND 2)
+set(WOLFSSL_LIBRARY_VERSION_SECOND 1)
 
 # increment if source code has changed
 # set to zero if WOLFSSL_LIBRARY_VERSION_FIRST is incremented or
@@ -125,12 +125,16 @@ check_function_exists("socket" HAVE_SOCKET)
 check_function_exists("strftime" HAVE_STRFTIME)
 check_function_exists("__atomic_fetch_add" HAVE_C___ATOMIC)
 
+include(CheckSymbolExists)
+check_symbol_exists(isascii "ctype.h" HAVE_ISASCII)
+
 include(CheckTypeSize)
 
 check_type_size("__uint128_t" __UINT128_T)
 check_type_size("long long" SIZEOF_LONG_LONG)
 check_type_size("long" SIZEOF_LONG)
 check_type_size("time_t" SIZEOF_TIME_T)
+check_type_size("uintptr_t" HAVE_UINTPTR_T)
 
 # By default, HAVE___UINT128_T gets defined as TRUE,
 # but we want it as 1.
@@ -152,9 +156,14 @@ endif()
 # Thread local storage
 include(CheckCSourceCompiles)
 
-set(TLS_KEYWORDS "__thread" "__declspec(thread)")
-foreach(TLS_KEYWORD IN LISTS TLS_KEYWORDS)
-    set(TLS_CODE "#include <stdlib.h>
+if(CMAKE_C_COMPILER_ID STREQUAL "OpenWatcom")
+    if(CMAKE_SYSTEM_NAME STREQUAL "Windows")
+        list(APPEND WOLFSSL_DEFINITIONS "-DHAVE_THREAD_LS")
+    endif()
+else()
+    set(TLS_KEYWORDS "__thread" "__declspec(thread)")
+    foreach(TLS_KEYWORD IN LISTS TLS_KEYWORDS)
+        set(TLS_CODE "#include <stdlib.h>
                   static void foo(void) {
                      static ${TLS_KEYWORD} int bar\;
                      exit(1)\;
@@ -163,21 +172,22 @@ foreach(TLS_KEYWORD IN LISTS TLS_KEYWORDS)
                   int main() {
                     return 0\;
                   }"
-    )
-    check_c_source_compiles(${TLS_CODE} THREAD_LS_ON)
+        )
+        check_c_source_compiles(${TLS_CODE} THREAD_LS_ON)
 
-    if(THREAD_LS_ON)
-        list(APPEND WOLFSSL_DEFINITIONS "-DHAVE_THREAD_LS")
-        break()
-    else()
-        # THREAD_LS_ON is cached after each call to
-        # check_c_source_compiles, and the function
-        # won't run subsequent times if the variable
-        # is in the cache. To make it run again, we
-        # need to remove the variable from the cache.
-        unset(THREAD_LS_ON CACHE)
-    endif()
-endforeach()
+        if(THREAD_LS_ON)
+            list(APPEND WOLFSSL_DEFINITIONS "-DHAVE_THREAD_LS")
+            break()
+        else()
+            # THREAD_LS_ON is cached after each call to
+            # check_c_source_compiles, and the function
+            # won't run subsequent times if the variable
+            # is in the cache. To make it run again, we
+            # need to remove the variable from the cache.
+            unset(THREAD_LS_ON CACHE)
+        endif()
+    endforeach()
+endif()
 
 # TODO: AX_PTHREAD does a lot. Need to implement the
 #       rest of its logic.
@@ -197,13 +207,20 @@ find_package(Threads)
 # Example for map file and custom linker script
 #set(CMAKE_EXE_LINKER_FLAGS " -Xlinker -Map=output.map -T\"${CMAKE_CURRENT_SOURCE_DIR}/linker.ld\"")
 
+message(STATUS "C Compiler ID: ${CMAKE_C_COMPILER_ID}")
+
 if(DEFINED WARNING_C_FLAGS)
-set(CMAKE_C_FLAGS "${WARNING_C_FLAGS} ${CMAKE_C_FLAGS}")
+    set(CMAKE_C_FLAGS "${WARNING_C_FLAGS} ${CMAKE_C_FLAGS}")
+endif()
+
+if(CMAKE_C_COMPILER_ID STREQUAL "OpenWatcom")
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -wx -wcd=202")
+    list(APPEND WOLFSSL_DEFINITIONS "-DWOLFSSL_HAVE_MIN -DWOLFSSL_HAVE_MAX -DNO_WRITEV")
 elseif(WIN32)
-# Windows cl.exe does not support the -Wextra, -Wno-unused and -Werror flags.
-set(CMAKE_C_FLAGS "-Wall ${CMAKE_C_FLAGS}")
+    # Windows cl.exe does not support the -Wextra, -Wno-unused and -Werror flags.
+    set(CMAKE_C_FLAGS "-Wall ${CMAKE_C_FLAGS}")
 else()
-set(CMAKE_C_FLAGS "-Wall -Wextra -Wno-unused -Werror ${CMAKE_C_FLAGS}")
+    set(CMAKE_C_FLAGS "-Wall -Wextra -Wno-unused -Werror ${CMAKE_C_FLAGS}")
 endif()
 
 ####################################################
@@ -280,9 +297,7 @@ if(NOT WOLFSSL_SINGLE_THREADED)
     if(CMAKE_USE_PTHREADS_INIT)
         list(APPEND WOLFSSL_LINK_LIBS Threads::Threads)
         set(HAVE_PTHREAD 1)
-        list(APPEND WOLFSSL_DEFINITIONS
-            "-DHAVE_PTHREAD"
-            "-D_POSIX_THREADS")
+        list(APPEND WOLFSSL_DEFINITIONS "-DHAVE_PTHREAD")
     endif()
 else()
     list(APPEND WOLFSSL_DEFINITIONS "-DSINGLE_THREADED")
@@ -419,16 +434,17 @@ if(WOLFSSL_CURL)
     set(WOLFSSL_MD4 "yes")
     set(WOLFSSL_DES3 "yes")
     set(WOLFSSL_ALPN "yes")
+    set(WOLFSSL_WOLFSSH "yes")
     set(WOLFSSL_OPENSSLEXTRA "yes")
     set(WOLFSSL_CRL "yes")
     set(WOLFSSL_OCSP "yes")
     set(WOLFSSL_OCSPSTAPLING "yes")
     set(WOLFSSL_OCSPSTAPLING_V2 "yes")
+    # Note: OCSP sets requisite HAVE_TLS_EXTENSIONS and HAVE_CERTIFICATE_STATUS_REQUEST(_V2)
     set(WOLFSSL_SNI "yes")
     set(WOLFSSL_ALT_CERT_CHAINS "yes")
     set(WOLFSSL_IP_ALT_NAME "yes")
     set(WOLFSSL_SESSION_TICKET "yes")
-    set(WOLFSSL_WOLFSSH "yes")
     list(APPEND WOLFSSL_DEFINITIONS
         "-DNO_SESSION_CACHE_REF" "-DWOLFSSL_DES_ECB")
 endif()
@@ -556,9 +572,18 @@ add_option(WOLFSSL_OQS
     "Enable integration with the OQS (Open Quantum Safe) liboqs library (default: disabled)"
     "no" "yes;no")
 
-# Kyber
-add_option(WOLFSSL_KYBER
-    "Enable the wolfSSL PQ Kyber library (default: disabled)"
+# ML-KEM/Kyber
+add_option(WOLFSSL_MLKEM
+    "Enable the wolfSSL PQ ML-KEM library (default: disabled)"
+    "no" "yes;no")
+
+# LMS
+add_option(WOLFSSL_LMS
+    "Enable the PQ LMS Stateful Hash-based Signature Scheme (default: disabled)"
+    "no" "yes;no")
+
+add_option(WOLFSSL_LMSSHA256192
+    "Enable the LMS SHA_256_192 truncated variant (default: disabled)"
     "no" "yes;no")
 
 # Experimental features
@@ -574,7 +599,7 @@ if (WOLFSSL_EXPERIMENTAL)
     # check if any experimental features are also enabled:
     set(WOLFSSL_FOUND_EXPERIMENTAL_FEATURE 0)
 
-    set_wolfssl_definitions("WOLFSSL_EXPERIMENTAL_SETTINGS" RESUlT)
+    set_wolfssl_definitions("WOLFSSL_EXPERIMENTAL_SETTINGS" RESULT)
 
     # Checking for experimental feature: OQS
     message(STATUS "Looking for WOLFSSL_OQS")
@@ -589,9 +614,9 @@ if (WOLFSSL_EXPERIMENTAL)
             list(APPEND WOLFSSL_LINK_LIBS ${OQS_LIBRARY})
             list(APPEND WOLFSSL_INCLUDE_DIRS ${OQS_INCLUDE_DIR})
 
-            set_wolfssl_definitions("HAVE_LIBOQS"          RESUlT)
-            set_wolfssl_definitions("HAVE_TLS_EXTENSIONS"  RESUlT)
-            set_wolfssl_definitions("OPENSSL_EXTRA"        RESUlT)
+            set_wolfssl_definitions("HAVE_LIBOQS"          RESULT)
+            set_wolfssl_definitions("HAVE_TLS_EXTENSIONS"  RESULT)
+            set_wolfssl_definitions("OPENSSL_EXTRA"        RESULT)
 
         else()
             message(STATUS "Checking OQS - not found")
@@ -601,20 +626,52 @@ if (WOLFSSL_EXPERIMENTAL)
         message(STATUS "Looking for WOLFSSL_OQS - not found")
     endif()
 
-    # Checking for experimental feature: Kyber
-    message(STATUS "Looking for WOLFSSL_KYBER")
-    if (WOLFSSL_KYBER)
+    # Checking for experimental feature: WOLFSSL_MLKEM
+    message(STATUS "Looking for WOLFSSL_MLKEM")
+    if (WOLFSSL_MLKEM)
         set(WOLFSSL_FOUND_EXPERIMENTAL_FEATURE 1)
 
-        message(STATUS "Automatically set related requirements for Kyber:")
-        set_wolfssl_definitions("WOLFSSL_HAVE_KYBER" RESUlT)
-        set_wolfssl_definitions("WOLFSSL_WC_KYBER"   RESUlT)
-        set_wolfssl_definitions("WOLFSSL_SHA3"       RESUlT)
-        set_wolfssl_definitions("WOLFSSL_SHAKE128"   RESUlT)
-        set_wolfssl_definitions("WOLFSSL_SHAKE256"   RESUlT)
-        message(STATUS "Looking for WOLFSSL_KYBER - found")
+        message(STATUS "Automatically set related requirements for ML-KEM:")
+        add_definitions("-DWOLFSSL_HAVE_MLKEM")
+        add_definitions("-DWOLFSSL_WC_MLKEM")
+        add_definitions("-DWOLFSSL_SHA3")
+        add_definitions("-DWOLFSSL_SHAKE128")
+        add_definitions("-DWOLFSSL_SHAKE256")
+
+        set_wolfssl_definitions("WOLFSSL_HAVE_MLKEM" RESULT)
+        set_wolfssl_definitions("WOLFSSL_WC_MLKEM"   RESULT)
+        set_wolfssl_definitions("WOLFSSL_SHA3"       RESULT)
+        set_wolfssl_definitions("WOLFSSL_SHAKE128"   RESULT)
+        set_wolfssl_definitions("WOLFSSL_SHAKE256"   RESULT)
+        message(STATUS "Looking for WOLFSSL_MLKEM - found")
     else()
-        message(STATUS "Looking for WOLFSSL_KYBER - not found")
+        message(STATUS "Looking for WOLFSSL_MLKEM - not found")
+    endif()
+
+    # Checking for experimental feature: WOLFSSL_LMS
+    message(STATUS "Looking for WOLFSSL_LMS")
+    if (WOLFSSL_LMS)
+        set(WOLFSSL_FOUND_EXPERIMENTAL_FEATURE 2)
+
+        message(STATUS "Automatically set related requirements for LMS")
+        add_definitions("-DWOLFSSL_HAVE_LMS")
+        add_definitions("-DWOLFSSL_WC_LMS")
+        set_wolfssl_definitions("WOLFSSL_HAVE_LMS" RESULT)
+        set_wolfssl_definitions("WOLFSSL_WC_LMS"   RESULT)
+        message(STATUS "Looking for WOLFSSL_LMS - found")
+        # Checking for experimental feature: WOLFSSL_LMSSHA256192
+        if (WOLFSSL_LMSSHA256192)
+            message(STATUS "Automatically set related requirements for LMS SHA256-192")
+            add_definitions("-DWOLFSSL_LMS_SHA256_192")
+            add_definitions("-DWOLFSSL_NO_LMS_SHA256_256")
+            set_wolfssl_definitions("WOLFSSL_LMS_SHA256_192"    RESULT)
+            set_wolfssl_definitions("WOLFSSL_NO_LMS_SHA256_256" RESULT)
+            message(STATUS "Looking for WOLFSSL_LMSSHA256192 - found")
+        else()
+            message(STATUS "Looking for WOLFSSL_LMSSHA256192 - not found")
+        endif()
+    else()
+        message(STATUS "Looking for WOLFSSL_LMS - not found")
     endif()
 
     # Other experimental feature detection can be added here...
@@ -627,8 +684,8 @@ if (WOLFSSL_EXPERIMENTAL)
     endif()
 
     # Sanity checks
-    if(WOLFSSL_OQS AND WOLFSSL_KYBER)
-        message(FATAL_ERROR "Error: cannot enable both WOLFSSL_OQS and WOLFSSL_KYBER at the same time.")
+    if(WOLFSSL_OQS AND WOLFSSL_MLKEM)
+        message(FATAL_ERROR "Error: cannot enable both WOLFSSL_OQS and WOLFSSL_MLKEM at the same time.")
     endif()
 
 else()
@@ -637,11 +694,21 @@ else()
     if (WOLFSSL_OQS)
         message(FATAL_ERROR "Error: WOLFSSL_OQS requires WOLFSSL_EXPERIMENTAL at this time.")
     endif()
-    if(WOLFSSL_KYBER)
-        message(FATAL_ERROR "Error: WOLFSSL_KYBER requires WOLFSSL_EXPERIMENTAL at this time.")
+    if(WOLFSSL_MLKEM)
+        message(FATAL_ERROR "Error: WOLFSSL_MLKEM requires WOLFSSL_EXPERIMENTAL at this time.")
     endif()
 endif()
 
+# LMS
+add_option(WOLFSSL_LMS
+    "Enable the wolfSSL LMS implementation (default: disabled)"
+    "no" "yes;no")
+
+# XMSS
+add_option(WOLFSSL_XMSS
+    "Enable the wolfSSL XMSS implementation (default: disabled)"
+    "no" "yes;no")
+
 # TODO: - Lean PSK
 #       - Lean TLS
 #       - Low resource
@@ -655,8 +722,6 @@ endif()
 #       - Atomic user record layer
 #       - Public key callbacks
 #       - Microchip/Atmel CryptoAuthLib
-#       - XMSS
-#       - LMS
 #       - dual-certs
 
 # AES-CBC
@@ -731,7 +796,8 @@ add_option("WOLFSSL_AESCTR"
 
 if(WOLFSSL_OPENVPN OR
    WOLFSSL_LIBSSH2 OR
-   WOLFSSL_AESSIV)
+   WOLFSSL_AESSIV OR
+   WOLFSSL_CLU)
     override_cache(WOLFSSL_AESCTR "yes")
 endif()
 
@@ -871,7 +937,7 @@ endif()
 #       - SEP
 
 add_option("WOLFSSL_KEYGEN"
-    "Enable key generation (default: disabled)])"
+    "Enable key generation (default: disabled)"
     "no" "yes;no")
 
 add_option("WOLFSSL_CERTGEN"
@@ -945,13 +1011,29 @@ if(WOLFSSL_ECC)
     endif()
 endif()
 
-# TODO: - ECC custom curves
-#       - Compressed key
+# TODO: - Compressed key
 #       - FP ECC, fixed point cache ECC
 #       - ECC encrypt
 #       - PSK
 #       - Single PSK identity
 
+# ECC custom curves
+add_option("WOLFSSL_ECCCUSTCURVES"
+    "Enable ECC Custom Curves (default: disabled)"
+    "no" "yes;no;all")
+
+if(WOLFSSL_ECCCUSTCURVES)
+    if("${WOLFSSL_ECCCUSTCURVES}" STREQUAL "all")
+        list(APPEND WOLFSSL_DEFINITIONS "-DHAVE_ECC_SECPR2")
+        list(APPEND WOLFSSL_DEFINITIONS "-DHAVE_ECC_SECPR3")
+        list(APPEND WOLFSSL_DEFINITIONS "-DHAVE_ECC_BRAINPOOL")
+        list(APPEND WOLFSSL_DEFINITIONS "-DHAVE_ECC_KOBLITZ")
+        list(APPEND WOLFSSL_DEFINITIONS "-DHAVE_ECC_CDH")
+    endif()
+
+    list(APPEND WOLFSSL_DEFINITIONS "-DWOLFSSL_CUSTOM_CURVES")
+endif()
+
 # CURVE25519
 set(WOLFSSL_CURVE25519_SMALL "no")
 add_option("WOLFSSL_CURVE25519"
@@ -982,7 +1064,7 @@ add_option("WOLFSSL_ED25519"
     "Enable ED25519 (default: disabled)"
     "no" "yes;no")
 
-if(WOLFSSL_OPENSSH)
+if(WOLFSSL_OPENSSH OR WOLFSSL_CLU)
     override_cache(WOLFSSL_ED25519 "yes")
 endif()
 
@@ -1112,8 +1194,7 @@ if(NOT WOLFSSL_MEMORY)
 else()
     # turn off memory cb if leanpsk or leantls on
     if(WOLFSSL_LEAN_PSK OR WOLFSSL_LEAN_TLS)
-        # but don't turn on NO_WOLFSSL_MEMORY because using own
-        override_cache(WOLFSSL_MEMORY "no")
+        list(APPEND WOLFSSL_DEFINITIONS "-DNO_WOLFSSL_MEMORY")
     endif()
 endif()
 
@@ -1658,6 +1739,9 @@ add_option(WOLFSSL_PKCS7 ${WOLFSSL_PKCS7_HELP_STRING} "no" "yes;no")
 set(WOLFSSL_TPM_HELP_STRING "Enable wolfTPM options (default: disabled)")
 add_option(WOLFSSL_TPM ${WOLFSSL_TPM_HELP_STRING} "no" "yes;no")
 
+set(WOLFSSL_CLU_HELP_STRING "Enable wolfCLU options (default: disabled)")
+add_option(WOLFSSL_CLU ${WOLFSSL_CLU_HELP_STRING} "no" "yes;no")
+
 set(WOLFSSL_AESKEYWRAP_HELP_STRING "Enable AES key wrap support (default: disabled)")
 add_option(WOLFSSL_AESKEYWRAP ${WOLFSSL_AESKEYWRAP_HELP_STRING} "no" "yes;no")
 
@@ -1877,6 +1961,10 @@ add_option("WOLFSSL_CRYPTOCB"
     "Enable crypto callbacks (default: disabled)"
     "no" "yes;no")
 
+add_option("WOLFSSL_CRYPTOCB_NO_SW_TEST"
+    "Disable crypto callback SW testing (default: disabled)"
+    "no" "yes;no")
+
 add_option("WOLFSSL_PKCALLBACKS"
     "Enable public key callbacks (default: disabled)"
     "no" "yes;no")
@@ -1998,6 +2086,25 @@ if(WOLFSSL_TPM)
     override_cache(WOLFSSL_AESCFB   "yes")
 endif()
 
+if(WOLFSSL_CLU)
+    override_cache(WOLFSSL_CERTGEN  "yes")
+    override_cache(WOLFSSL_CERTREQ  "yes")
+    override_cache(WOLFSSL_CERTEXT  "yes")
+    override_cache(WOLFSSL_MD5      "yes")
+    override_cache(WOLFSSL_AESCTR   "yes")
+    override_cache(WOLFSSL_KEYGEN   "yes")
+    override_cache(WOLFSSL_OPENSSLALL "yes")
+    override_cache(WOLFSSL_ED25519  "yes")
+    override_cache(WOLFSSL_SHA512   "yes")
+    override_cache(WOLFSSL_DES3     "yes")
+    override_cache(WOLFSSL_PKCS7    "yes")
+    list(APPEND WOLFSSL_DEFINITIONS "-DHAVE_OID_ENCODING" "-DWOLFSSL_NO_ASN_STRICT" "-DWOLFSSL_ALT_NAMES")
+    # Add OPENSSL_ALL definition to ensure OpenSSL compatibility functions are available
+    list(APPEND WOLFSSL_DEFINITIONS "-DOPENSSL_ALL")
+    # Remove NO_DES3 from WOLFSSL_DEFINITIONS to ensure DES3 is enabled
+    list(REMOVE_ITEM WOLFSSL_DEFINITIONS "-DNO_DES3")
+endif()
+
 if(WOLFSSL_AESCFB)
     list(APPEND WOLFSSL_DEFINITIONS "-DWOLFSSL_AES_CFB")
 endif()
@@ -2080,6 +2187,10 @@ if(WOLFSSL_CRYPTOCB)
     list(APPEND WOLFSSL_DEFINITIONS "-DWOLF_CRYPTO_CB")
 endif()
 
+if(WOLFSSL_CRYPTOCB_NO_SW_TEST)
+    list(APPEND WOLFSSL_DEFINITIONS "-DWC_TEST_NO_CRYPTOCB_SW_TEST")
+endif()
+
 # Public Key Callbacks
 if(WOLFSSL_PKCALLBACKS)
     list(APPEND WOLFSSL_DEFINITIONS "-DHAVE_PK_CALLBACKS")
@@ -2253,6 +2364,18 @@ if (ENABLE_SCCACHE AND (NOT WOLFSSL_SCCACHE_ALREADY_SET_FLAG))
     endif()
 endif()
 
+add_option("WOLFSSL_KEYLOG_EXPORT"
+    "Enable insecure export of TLS secrets to an NSS keylog file (default: disabled)"
+    "no" "yes;no")
+if(WOLFSSL_KEYLOG_EXPORT)
+    message(WARNING "Keylog export enabled -- Sensitive key data will be stored insecurely.")
+    list(APPEND WOLFSSL_DEFINITIONS
+        "-DSHOW_SECRETS"
+        "-DHAVE_SECRET_CALLBACK"
+        "-DWOLFSSL_SSLKEYLOGFILE"
+        "-DWOLFSSL_KEYLOG_EXPORT_WARNED")
+endif()
+
 
 file(REMOVE ${OPTION_FILE})
 
@@ -2335,7 +2458,7 @@ endif()
 
 foreach(DEF IN LISTS WOLFSSL_DEFINITIONS)
     string(REGEX MATCH "^(-D)?([^=]+)(=(.*))?$" DEF_MATCH ${DEF})
-    if (DEFINED CMAKE_MATCH_4)
+    if (NOT "${CMAKE_MATCH_4}" STREQUAL "")
         set(${CMAKE_MATCH_2} ${CMAKE_MATCH_4})
         # message("set(${CMAKE_MATCH_2} ${CMAKE_MATCH_4})")
     else()
@@ -2383,17 +2506,24 @@ target_include_directories(wolfssl
 
 target_link_libraries(wolfssl PUBLIC ${WOLFSSL_LINK_LIBS})
 
-if(WIN32)
-    # For Windows link ws2_32
+if(CMAKE_C_COMPILER_ID STREQUAL "OpenWatcom")
+    if(CMAKE_SYSTEM_NAME STREQUAL "Windows")
+        target_link_libraries(wolfssl PUBLIC ws2_32 crypt32)
+    endif()
+elseif (WIN32 OR ${CMAKE_SYSTEM_NAME} MATCHES "^MSYS" OR ${CMAKE_SYSTEM_NAME} MATCHES "^MINGW")
+    # For Windows link required libraries
+    message("Building on Windows/MSYS/MINGW")
     target_link_libraries(wolfssl PUBLIC
-        $<$<PLATFORM_ID:Windows>:ws2_32 crypt32>)
+        ws2_32 crypt32 advapi32)
 elseif(APPLE)
+    message("Building on Apple")
     if(WOLFSSL_SYS_CA_CERTS)
         target_link_libraries(wolfssl PUBLIC
             ${CORE_FOUNDATION_FRAMEWORK}
             ${SECURITY_FRAMEWORK})
     endif()
 else()
+    message("Building on Linux (or other)")
     if(WOLFSSL_DH AND NOT WOLFSSL_DH_CONST)
         # DH requires math (m) library
         target_link_libraries(wolfssl
@@ -2450,7 +2580,9 @@ if(WOLFSSL_EXAMPLES)
         add_executable(tls_bench
             ${CMAKE_CURRENT_SOURCE_DIR}/examples/benchmark/tls_bench.c)
         target_link_libraries(tls_bench wolfssl)
-        target_link_libraries(tls_bench Threads::Threads)
+        if(CMAKE_USE_PTHREADS_INIT)
+            target_link_libraries(tls_bench Threads::Threads)
+        endif()
         set_property(TARGET tls_bench
                  PROPERTY RUNTIME_OUTPUT_DIRECTORY
                  ${WOLFSSL_OUTPUT_BASE}/examples/benchmark)
@@ -2459,19 +2591,65 @@ if(WOLFSSL_EXAMPLES)
     # Build unit tests
     add_executable(unit_test
         tests/api.c
-        tests/hash.c
+        tests/api/test_md2.c
+        tests/api/test_md4.c
+        tests/api/test_md5.c
+        tests/api/test_sha.c
+        tests/api/test_sha256.c
+        tests/api/test_sha512.c
+        tests/api/test_sha3.c
+        tests/api/test_blake2.c
+        tests/api/test_sm3.c
+        tests/api/test_ripemd.c
+        tests/api/test_hash.c
+        tests/api/test_hmac.c
+        tests/api/test_cmac.c
+        tests/api/test_des3.c
+        tests/api/test_chacha.c
+        tests/api/test_poly1305.c
+        tests/api/test_chacha20_poly1305.c
+        tests/api/test_camellia.c
+        tests/api/test_arc4.c
+        tests/api/test_rc2.c
+        tests/api/test_aes.c
+        tests/api/test_ascon.c
+        tests/api/test_sm4.c
+        tests/api/test_wc_encrypt.c
+        tests/api/test_random.c
+        tests/api/test_wolfmath.c
+        tests/api/test_rsa.c
+        tests/api/test_dsa.c
+        tests/api/test_dh.c
+        tests/api/test_ecc.c
+        tests/api/test_sm2.c
+        tests/api/test_curve25519.c
+        tests/api/test_ed25519.c
+        tests/api/test_curve448.c
+        tests/api/test_ed448.c
+        tests/api/test_mlkem.c
+        tests/api/test_mldsa.c
+        tests/api/test_signature.c
+        tests/api/test_dtls.c
+        tests/api/test_ocsp.c
+        tests/api/test_evp.c
+        tests/api/test_tls_ext.c
         tests/srp.c
         tests/suites.c
         tests/w64wrapper.c
         tests/unit.c
         tests/quic.c
+        tests/utils.c
+        testsuite/utils.c
         examples/server/server.c
-        examples/client/client.c)
+        examples/client/client.c
+        wolfcrypt/test/test.c)
     target_include_directories(unit_test PRIVATE
         ${CMAKE_CURRENT_BINARY_DIR})
     target_compile_options(unit_test PUBLIC "-DNO_MAIN_DRIVER")
     target_link_libraries(unit_test wolfssl)
-    target_link_libraries(unit_test Threads::Threads)
+    if(CMAKE_USE_PTHREADS_INIT)
+        target_link_libraries(unit_test Threads::Threads)
+    endif()
     set_property(TARGET unit_test
                  PROPERTY RUNTIME_OUTPUT_DIRECTORY
                  ${WOLFSSL_OUTPUT_BASE}/tests/)
@@ -2721,14 +2899,17 @@ if(WOLFSSL_INSTALL)
     set(includedir "\${prefix}/include")
     set(VERSION ${PROJECT_VERSION})
 
-    # Setting libm in Libs.private of wolfssl.pc.
-    # See "Link Libraries" in above about `m` insertion to LINK_LIBRARIES
-    get_target_property(_wolfssl_dep_libs wolfssl LINK_LIBRARIES)
-    list(FIND _wolfssl_dep_libs m _dep_libm)
-    if ("${_dep_libm}" GREATER -1)
-      set(LIBM -lm)
+    if(CMAKE_C_COMPILER_ID STREQUAL "OpenWatcom")
     else()
-      set(LIBM)
+        # Setting libm in Libs.private of wolfssl.pc.
+        # See "Link Libraries" in above about `m` insertion to LINK_LIBRARIES
+        get_target_property(_wolfssl_dep_libs wolfssl LINK_LIBRARIES)
+        list(FIND _wolfssl_dep_libs m _dep_libm)
+        if ("${_dep_libm}" GREATER -1)
+            set(LIBM -lm)
+        else()
+            set(LIBM)
+        endif()
     endif()
 
     configure_file(support/wolfssl.pc.in ${CMAKE_CURRENT_BINARY_DIR}/support/wolfssl.pc @ONLY)

ChangeLog.md

@@ -1,3 +1,532 @@
+# wolfSSL Release 5.8.0 (Apr 24, 2025)
+
+Release 5.8.0 has been developed according to wolfSSL's development and QA
+process (see link below) and successfully passed the quality criteria.
+https://www.wolfssl.com/about/wolfssl-software-development-process-quality-assurance
+
+NOTE: * --enable-heapmath is deprecated
+
+PR stands for Pull Request, and PR <NUMBER> references a GitHub pull request
+ number where the code change was added.
+
+
+## New Feature Additions
+* Algorithm registration in the Linux kernel module for all supported FIPS AES,
+ SHA, HMAC, ECDSA, ECDH, and RSA modes, key sizes, and digest sizes.
+* Implemented various fixes to support building for Open Watcom including OS/2
+ support and Open Watcom 1.9 compatibility (PR 8505, 8484)
+* Added support for STM32H7S (tested on NUCLEO-H7S3L8) (PR 8488)
+* Added support for STM32WBA (PR 8550)
+* Added Extended Master Secret Generation Callback to the --enable-pkcallbacks
+ build (PR 8303)
+* Implement AES-CTS (configure flag --enable-aescts) in wolfCrypt (PR 8594)
+* Added support for libimobiledevice commit 860ffb (PR 8373)
+* Initial ASCON hash256 and AEAD128 support based on NIST SP 800-232 IPD
+ (PR 8307)
+* Added blinding option when using a Curve25519 private key by defining the
+ macro WOLFSSL_CURVE25519_BLINDING (PR 8392)
+
+
+## Linux Kernel Module
+* Production-ready LKCAPI registration for cbc(aes), cfb(aes), gcm(aes),
+ rfc4106 (gcm(aes)), ctr(aes), ofb(aes), and ecb(aes), ECDSA with P192, P256,
+ P384, and P521 curves, ECDH with P192, P256, and P384 curves, and RSA with
+ bare and PKCS1 padding
+* Various fixes for LKCAPI wrapper for AES-CBC and AES-CFB (PR 8534, 8552)
+* Adds support for the legacy one-shot AES-GCM back end (PR 8614, 8567) for
+ compatibility with FIPS 140-3 Cert #4718.
+* On kernel >=6.8, for CONFIG_FORTIFY_SOURCE, use 5-arg fortify_panic() override
+ macro (PR 8654)
+* Update calls to scatterwalk_map() and scatterwalk_unmap() for linux commit
+ 7450ebd29c (merged for Linux 6.15) (PR 8667)
+* Inhibit LINUXKM_LKCAPI_REGISTER_ECDH on kernel <5.13 (PR 8673)
+* Fix for uninitialized build error with fedora (PR 8569)
+* Register ecdsa, ecdh, and rsa for use with linux kernel crypto (PR 8637, 8663,
+ 8646)
+* Added force zero shared secret buffer, and clear of old key with ecdh
+ (PR 8685)
+* Update fips-check.sh script to pickup XTS streaming support on aarch64 and
+ disable XTS-384 as an allowed use in FIPS mode (PR 8509, 8546)
+
+
+## Enhancements and Optimizations
+
+### Security & Cryptography
+* Add constant-time implementation improvements for encoding functions. We thank
+ Zhiyuan and Gilles for sharing a new constant-time analysis tool (CT-LLVM) and
+ reporting several non-constant-time implementations. (PR 8396, 8617)
+* Additional support for PKCS7 verify and decode with indefinite lengths
+ (PR 8520, 834, 8645)
+* Add more PQC hybrid key exchange algorithms such as support for combinations
+ with X25519 and X448 enabling compatibility with the PQC key exchange support
+ in Chromium browsers and Mozilla Firefox (PR 7821)
+* Add short-circuit comparisons to DH key validation for RFC 7919 parameters
+ (PR 8335)
+* Improve FIPS compatibility with various build configurations for more resource
+ constrained builds (PR 8370)
+* Added option to disable ECC public key order checking (PR 8581)
+* Allow critical alt and basic constraints extensions (PR 8542)
+* New codepoint for MLDSA to help with interoperability (PR 8393)
+* Add support for parsing trusted PEM certs having the header
+ “BEGIN_TRUSTED_CERT” (PR 8400)
+* Add support for parsing only of DoD certificate policy and Comodo Ltd PKI OIDs
+ (PR 8599, 8686)
+* Update ssl code in `src/*.c` to be consistent with wolfcrypt/src/asn.c
+ handling of ML_DSA vs Dilithium and add dual alg. test (PR 8360, 8425)
+
+### Build System, Configuration, CI & Protocols
+* Internal refactor for include of config.h and when building with
+ BUILDING_WOLFSSL macro. This refactor will give a warning of “deprecated
+ function” when trying to improperly use an internal API of wolfSSL in an
+ external application. (PR 8640, 8647, 8660, 8662, 8664)
+* Add WOLFSSL_CLU option to CMakeLists.txt (PR 8548)
+* Add CMake and Zephyr support for XMSS and LMS (PR 8494)
+* Added GitHub CI for CMake builds (PR 8439)
+* Added necessary macros when building wolfTPM Zephyr with wolfSSL (PR 8382)
+* Add MSYS2 build continuous integration test (PR 8504)
+* Update DevKitPro doc to list calico dependency with build commands (PR 8607)
+* Conversion compiler warning fixes and additional continuous integration test
+ added (PR 8538)
+* Enable DTLS 1.3 by default in --enable-jni builds (PR 8481)
+* Enabled TLS 1.3 middlebox compatibility by default for --enable-jni builds
+ (PR 8526)
+
+### Performance Improvements
+* Performance improvements AES-GCM and HMAC (in/out hash copy) (PR 8429)
+* LMS fixes and improvements adding API to get Key ID from raw private key,
+ change to identifiers to match standard, and fix for when
+ WOLFSSL_LMS_MAX_LEVELS is 1 (PR 8390, 8684, 8613, 8623)
+* ML-KEM/Kyber improvements and fixes; no malloc builds, small memory usage,
+ performance improvement, fix for big-endian (PR 8397, 8412, 8436, 8467, 8619,
+ 8622, 8588)
+* Performance improvements for AES-GCM and when doing multiple HMAC operations
+ (PR 8445)
+
+### Assembly and Platform-Specific Enhancements
+* Poly1305 arm assembly changes adding ARM32 NEON implementation and fix for
+ Aarch64 use (PR 8344, 8561, 8671)
+* Aarch64 assembly enhancement to use more CPU features, fix for FreeBSD/OpenBSD
+ (PR 8325, 8348)
+* Only perform ARM assembly CPUID checks if support was enabled at build time
+ (PR 8566)
+* Optimizations for ARM32 assembly instructions on platforms less than ARMv7
+ (PR 8395)
+* Improve MSVC feature detection for static assert macros (PR 8440)
+* Improve Espressif make and CMake for ESP8266 and ESP32 series (PR 8402)
+* Espressif updates for Kconfig, ESP32P4 and adding a sample user_settings.h
+ (PR 8422, PR 8641)
+
+### OpenSSL Compatibility Layer
+* Modification to the push/pop to/from in OpenSSL compatibility layer. This is
+ a pretty major API change in the OpenSSL compatibility stack functions.
+ Previously the API would push/pop from the beginning of the list but now they
+ operate on the tail of the list. This matters when using the sk_value with
+ index values. (PR 8616)
+* OpenSSL Compat Layer: OCSP response improvements (PR 8408, 8498)
+* Expand the OpenSSL compatibility layer to include an implementation of
+ BN_CTX_get (PR 8388)
+
+### API Additions and Modifications
+* Refactor Hpke to allow multiple uses of a context instead of just one shot
+ mode (PR 6805)
+* Add support for PSK client callback with Ada and use with Alire (thanks
+ @mgrojo, PR 8332, 8606)
+* Change wolfSSL_CTX_GenerateEchConfig to generate multiple configs and add
+ functions wolfSSL_CTX_SetEchConfigs and wolfSSL_CTX_SetEchConfigsBase64 to
+ rotate the server's echConfigs (PR 8556)
+* Added the public API wc_PkcsPad to do PKCS padding (PR 8502)
+* Add NULL_CIPHER_TYPE support to wolfSSL_EVP_CipherUpdate (PR 8518)
+* Update Kyber APIs to ML-KEM APIs (PR 8536)
+* Add option to disallow automatic use of "default" devId using the macro
+ WC_NO_DEFAULT_DEVID (PR 8555)
+* Detect unknown key format on ProcessBufferTryDecode() and handle RSA-PSSk
+ format (PR 8630)
+
+### Porting and Language Support
+* Update Python port to support version 3.12.6 (PR 8345)
+* New additions for MAXQ with wolfPKCS11 (PR 8343)
+* Port to ntp 4.2.8p17 additions (PR 8324)
+* Add version 0.9.14 to tested libvncserver builds (PR 8337)
+
+### General Improvements and Cleanups
+* Cleanups for STM32 AES GCM (PR 8584)
+* Improvements to isascii() and the CMake key log option (PR 8596)
+* Arduino documentation updates, comments and spelling corrections (PR 8381,
+ 8384, 8514)
+* Expanding builds with WOLFSSL_NO_REALLOC for use with --enable-opensslall and
+ --enable-all builds (PR 8369, 8371)
+
+
+## Fixes
+* Fix a use after free caused by an early free on error in the X509 store
+ (PR 8449)
+* Fix to account for existing PKCS8 header with
+ wolfSSL_PEM_write_PKCS8PrivateKey (PR 8612)
+* Fixed failing CMake build issue when standard threads support is not found in
+ the system (PR 8485)
+* Fix segmentation fault in SHA-512 implementation for AVX512 targets built with
+ gcc -march=native -O2 (PR 8329)
+* Fix Windows socket API compatibility warning with mingw32 build (PR 8424)
+* Fix potential null pointer increments in cipher list parsing (PR 8420)
+* Fix for possible stack buffer overflow read with wolfSSL_SMIME_write_PKCS7.
+ Thanks to the team at Code Intelligence for the report. (PR 8466)
+* Fix AES ECB implementation for Aarch64 ARM assembly (PR 8379)
+* Fixed building with VS2008 and .NET 3.5 (PR 8621)
+* Fixed possible error case memory leaks in CRL and EVP_Sign_Final (PR 8447)
+* Fixed SSL_set_mtu compatibility function return code (PR 8330)
+* Fixed Renesas RX TSIP (PR 8595)
+* Fixed ECC non-blocking tests (PR 8533)
+* Fixed CMake on MINGW and MSYS (PR 8377)
+* Fixed Watcom compiler and added new CI test (PR 8391)
+* Fixed STM32 PKA ECC 521-bit support (PR 8450)
+* Fixed STM32 PKA with P521 and shared secret (PR 8601)
+* Fixed crypto callback macro guards with `DEBUG_CRYPTOCB` (PR 8602)
+* Fix outlen return for RSA private decrypt with WOLF_CRYPTO_CB_RSA_PAD
+ (PR 8575)
+* Additional sanity check on r and s lengths in DecodeECC_DSA_Sig_Bin (PR 8350)
+* Fix compat. layer ASN1_TIME_diff to accept NULL output params (PR 8407)
+* Fix CMake lean_tls build (PR 8460)
+* Fix for QUIC callback failure (PR 8475)
+* Fix missing alert types in AlertTypeToString for print out with debugging
+ enabled (PR 8572)
+* Fixes for MSVS build issues with PQC configure (PR 8568)
+* Fix for SE050 port and minor improvements (PR 8431, 8437)
+* Fix for missing rewind function in zephyr and add missing files for compiling
+ with assembly optimizations (PR 8531, 8541)
+* Fix for quic_record_append to return the correct code (PR 8340, 8358)
+* Fixes for Bind 9.18.28 port (PR 8331)
+* Fix to adhere more closely with RFC8446 Appendix D and set haveEMS when
+ negotiating TLS 1.3 (PR 8487)
+* Fix to properly check for signature_algorithms from the client in a TLS 1.3
+ server (PR 8356)
+* Fix for when BIO data is less than seq buffer size. Thanks to the team at Code
+ Intelligence for the report (PR 8426)
+* ARM32/Thumb2 fixes for WOLFSSL_NO_VAR_ASSIGN_REG and td4 variable declarations
+ (PR 8590, 8635)
+* Fix for Intel AVX1/SSE2 assembly to not use vzeroupper instructions unless ymm
+ or zmm registers are used (PR 8479)
+* Entropy MemUse fix for when block size less than update bits (PR 8675)
+
+
+# wolfSSL Release 5.7.6 (Dec 31, 2024)
+
+Release 5.7.6 has been developed according to wolfSSL's development and QA
+process (see link below) and successfully passed the quality criteria.
+https://www.wolfssl.com/about/wolfssl-software-development-process-quality-assurance
+
+NOTE:
+ * --enable-heapmath is deprecated.
+ * In this release, the default cipher suite preference is updated to prioritize
+ TLS_AES_256_GCM_SHA384 over TLS_AES_128_GCM_SHA256 when enabled.
+ * This release adds a sanity check for including wolfssl/options.h or
+ user_settings.h.
+
+
+PR stands for Pull Request, and PR <NUMBER> references a GitHub pull request
+ number where the code change was added.
+
+
+## Vulnerabilities
+* [Med] An OCSP (non stapling) issue was introduced in wolfSSL version 5.7.4
+ when performing OCSP requests for intermediate certificates in a certificate
+ chain. This affects only TLS 1.3 connections on the server side. It would not
+ impact other TLS protocol versions or connections that are not using the
+ traditional OCSP implementation. (Fix in pull request 8115)
+
+
+## New Feature Additions
+* Add support for RP2350 and improve RP2040 support, both with RNG optimizations
+ (PR 8153)
+* Add support for STM32MP135F, including STM32CubeIDE support and HAL support
+ for SHA2/SHA3/AES/RNG/ECC optimizations. (PR 8223, 8231, 8241)
+* Implement Renesas TSIP RSA Public Enc/Private support (PR 8122)
+* Add support for Fedora/RedHat system-wide crypto-policies (PR 8205)
+* Curve25519 generic keyparsing API added with  wc_Curve25519KeyToDer and
+ wc_Curve25519KeyDecode (PR 8129)
+* CRL improvements and update callback, added the functions
+ wolfSSL_CertManagerGetCRLInfo and wolfSSL_CertManagerSetCRLUpdate_Cb (PR 8006)
+* For DTLS, add server-side stateless and CID quality-of-life API. (PR 8224)
+
+
+## Enhancements and Optimizations
+* Add a CMake dependency check for pthreads when required. (PR 8162)
+* Update OS_Seed declarations for legacy compilers and FIPS modules (boundary
+ not affected). (PR 8170)
+* Enable WOLFSSL_ALWAYS_KEEP_SNI by default when using --enable-jni. (PR 8283)
+* Change the default cipher suite preference, prioritizing
+ TLS_AES_256_GCM_SHA384 over TLS_AES_128_GCM_SHA256. (PR 7771)
+* Add SRTP-KDF (FIPS module v6.0.0) to checkout script for release bundling
+ (PR 8215)
+* Make library build when no hardware crypto available for Aarch64 (PR 8293)
+* Update assembly code to avoid `uint*_t` types for better compatibility with
+ older C standards. (PR 8133)
+* Add initial documentation for writing ASN template code to decode BER/DER.
+ (PR 8120)
+* Perform full reduction in sc_muladd for EdDSA with Curve448 (PR 8276)
+* Allow SHA-3 hardware cryptography instructions to be explicitly not used in
+ MacOS builds (PR 8282)
+* Make Kyber and ML-KEM available individually and together. (PR 8143)
+* Update configuration options to include Kyber/ML-KEM and fix defines used in
+ wolfSSL_get_curve_name. (PR 8183)
+* Make GetShortInt available with WOLFSSL_ASN_EXTRA (PR 8149)
+* Improved test coverage and minor improvements of X509 (PR 8176)
+* Add sanity checks for configuration methods, ensuring the inclusion of
+ wolfssl/options.h or user_settings.h. (PR 8262)
+* Enable support for building without TLS (NO_TLS). Provides reduced code size
+ option for non-TLS users who want features like the certificate manager or
+ compatibility layer. (PR 8273)
+* Exposed get_verify functions with OPENSSL_EXTRA. (PR 8258)
+* ML-DSA/Dilithium: obtain security level from DER when decoding (PR 8177)
+* Implementation for using PKCS11 to retrieve certificate for SSL CTX (PR 8267)
+* Add support for the RFC822 Mailbox attribute (PR 8280)
+* Initialize variables and adjust types resolve warnings with Visual Studio in
+ Windows builds. (PR 8181)
+* Refactors and expansion of opensslcoexist build (PR 8132, 8216, 8230)
+* Add DTLS 1.3 interoperability, libspdm and DTLS CID interoperability tests
+ (PR 8261, 8255, 8245)
+* Remove trailing error exit code in wolfSSL install setup script (PR 8189)
+* Update Arduino files for wolfssl 5.7.4 (PR 8219)
+* Improve Espressif SHA HW/SW mutex messages (PR 8225)
+* Apply post-5.7.4 release updates for Espressif Managed Component examples
+ (PR 8251)
+* Expansion of c89 conformance (PR 8164)
+* Added configure option for additional sanity checks with --enable-faultharden
+ (PR 8289)
+* Aarch64 ASM additions to check CPU features before hardware crypto instruction
+ use (PR 8314)
+
+
+## Fixes
+* Fix a memory issue when using the compatibility layer with
+ WOLFSSL_GENERAL_NAME and handling registered ID types. (PR 8155)
+* Fix a build issue with signature fault hardening when using public key
+ callbacks (HAVE_PK_CALLBACKS). (PR 8287)
+* Fix for handling heap hint pointer properly when managing multiple WOLFSSL_CTX
+ objects and free’ing one of them (PR 8180)
+* Fix potential memory leak in error case with Aria. (PR 8268)
+* Fix Set_Verify flag behaviour on Ada wrapper. (PR 8256)
+* Fix a compilation error with the NO_WOLFSSL_DIR flag. (PR 8294)
+* Resolve a corner case for Poly1305 assembly code on Aarch64. (PR 8275)
+* Fix incorrect version setting in CSRs. (PR 8136)
+* Correct debugging output for cryptodev. (PR 8202)
+* Fix for benchmark application use with /dev/crypto GMAC auth error due to size
+ of AAD (PR 8210)
+* Add missing checks for the initialization of sp_int/mp_int with DSA to free
+ memory properly in error cases. (PR 8209)
+* Fix return value of wolfSSL_CTX_set_tlsext_use_srtp (8252)
+* Check Root CA by Renesas TSIP before adding it to ca-table (PR 8101)
+* Prevent adding a certificate to the CA cache for Renesas builds if it does not
+ set CA:TRUE in basic constraints. (PR 8060)
+* Fix attribute certificate holder entityName parsing. (PR 8166)
+* Resolve build issues for configurations without any wolfSSL/openssl
+ compatibility layer headers. (PR 8182)
+* Fix for building SP RSA small and RSA public only (PR 8235)
+* Fix for Renesas RX TSIP RSA Sign/Verify with wolfCrypt only (PR 8206)
+* Fix to ensure all files have settings.h included (like wc_lms.c) and guards
+ for building all `*.c` files (PR 8257 and PR 8140)
+* Fix x86 target build issues in Visual Studio for non-Windows operating
+ systems. (PR 8098)
+* Fix wolfSSL_X509_STORE_get0_objects to handle no CA (PR 8226)
+* Properly handle reference counting when adding to the X509 store. (PR 8233)
+* Fix for various typos and improper size used with FreeRTOS_bind in the Renesas
+ example. Thanks to Hongbo for the report on example issues. (PR 7537)
+* Fix for potential heap use after free with wolfSSL_PEM_read_bio_PrivateKey.
+ Thanks to Peter for the issue reported. (PR 8139)
+
+
+# wolfSSL Release 5.7.4 (Oct 24, 2024)
+
+Release 5.7.4 has been developed according to wolfSSL's development and QA
+process (see link below) and successfully passed the quality criteria.
+https://www.wolfssl.com/about/wolfssl-software-development-process-quality-assurance
+
+NOTE: * --enable-heapmath is being deprecated and will be removed by end of 2024
+
+PR stands for Pull Request, and PR <NUMBER> references a GitHub pull request
+ number where the code change was added.
+
+
+## Vulnerabilities
+* [Low] When the OpenSSL compatibility layer is enabled, certificate
+ verification behaved differently in wolfSSL than OpenSSL, in the
+ X509_STORE_add_cert() and X509_STORE_load_locations() implementations.
+ Previously, in cases where an application explicitly loaded an intermediate
+ certificate, wolfSSL was verifying only up to that intermediate certificate,
+ rather than verifying up to the root CA. This only affects use cases where the
+ API is called directly, and does not affect TLS connections. Users that call
+ the API X509_STORE_add_cert() or X509_STORE_load_locations() directly in their
+ applications are recommended to update the version of wolfSSL used or to have
+ additional sanity checks on certificates loaded into the X509_STORE when
+ verifying a certificate. (https://github.com/wolfSSL/wolfssl/pull/8087)
+
+
+## PQC TLS Experimental Build Fix
+* When using TLS with post quantum algorithms enabled, the connection uses a
+ smaller EC curve than agreed on. Users building with --enable-experimental and
+ enabling PQC cipher suites with TLS connections are recommended to update the
+ version of wolfSSL used. Thanks to Daniel Correa for the report.
+ (https://github.com/wolfSSL/wolfssl/pull/8084)
+
+
+## New Feature Additions
+* RISC-V 64 new assembly optimizations added for SHA-256, SHA-512, ChaCha20,
+ Poly1305, and SHA-3 (PR 7758,7833,7818,7873,7916)
+* Implement support for Connection ID (CID) with DTLS 1.2 (PR 7995)
+* Add support for (DevkitPro)libnds (PR 7990)
+* Add port for Mosquitto OSP (Open Source Project) (PR 6460)
+* Add port for init sssd (PR 7781)
+* Add port for eXosip2 (PR 7648)
+* Add support for STM32G4 (PR 7997)
+* Add support for MAX32665 and MAX32666 TPU HW and ARM ASM Crypto Callback
+ Support (PR 7777)
+* Add support for building wolfSSL to be used in libspdm (PR 7869)
+* Add port for use with Nucleus Plus 2.3 (PR 7732)
+* Initial support for RFC5755 x509 attribute certificates (acerts). Enabled with
+ --enable-acert (PR 7926)
+* PKCS#11 RSA Padding offload allows tokens to perform CKM_RSA_PKCS
+ (sign/encrypt), CKM_RSA_PKCS_PSS (sign), and CKM_RSA_PKCS_OAEP (encrypt).
+ (PR 7750)
+* Added “new” and “delete” style functions for heap/pool allocation and freeing
+ of low level crypto structures (PR 3166 and 8089)
+
+
+## Enhancements and Optimizations
+* Increase default max alt. names from 128 to 1024 (PR 7762)
+* Added new constant time DH agree function wc_DhAgree_ct (PR 7802)
+* Expanded compatibility layer with the API EVP_PKEY_is_a (PR 7804)
+* Add option to disable cryptocb test software test using
+ --disable-cryptocb-sw-test (PR 7862)
+* Add a call to certificate verify callback before checking certificate dates
+ (PR 7895)
+* Expanded algorithms supported with the wolfCrypt CSharp wrapper. Adding
+ support for RNG, ECC(ECIES and ECDHE), RSA, ED25519/Curve25519, AES-GCM, and
+ Hashing (PR 3166)
+* Expand MMCAU support for use with DES ECB (PR 7960)
+* Update AES SIV to handle multiple associated data inputs (PR 7911)
+* Remove HAVE_NULL_CIPHER from --enable-openssh (PR 7811)
+* Removed duplicate if(NULL) checks when calling XFREE (macro does) (PR 7839)
+* Set RSA_MIN_SIZE default to 2048 bits (PR 7923)
+* Added support for wolfSSL to be used as the default TLS in the zephyr kernel
+ (PR 7731)
+* Add enable provider build using --enable-wolfprovider with autotools (PR 7550)
+* Renesas RX TSIP ECDSA support (PR 7685)
+* Support DTLS1.3 downgrade when the server supports CID (PR 7841)
+* Server-side checks OCSP even if it uses v2 multi (PR 7828)
+* Add handling of absent hash params in PKCS7 bundle parsing and creation
+ (PR 7845)
+* Add the use of w64wrapper for Poly1305, enabling Poly1305 to be used in
+ environments that do not have a word64 type (PR 7759)
+* Update to the maxq10xx support (PR 7824)
+* Add support for parsing over optional PKCS8 attributes (PR 7944)
+* Add support for either side method with DTLS 1.3 (PR 8012)
+* Added PKCS7 PEM support for parsing PEM data with BEGIN/END PKCS7 (PR 7704)
+* Add CMake support for WOLFSSL_CUSTOM_CURVES (PR 7962)
+* Add left-most wildcard matching support to X509_check_host() (PR 7966)
+* Add option to set custom SKID with PKCS7 bundle creation (PR 7954)
+* Building wolfSSL as a library with Ada and corrections to Alire manifest
+ (PR 7303,7940)
+* Renesas RX72N support updated (PR 7849)
+* New option WOLFSSL_COPY_KEY added to always copy the key to the SSL object
+ (PR 8005)
+* Add the new option WOLFSSL_COPY_CERT to always copy the cert buffer for each
+ SSL object (PR 7867)
+* Add an option to use AES-CBC with HMAC for default session ticket enc/dec.
+ Defaults to AES-128-CBC with HMAC-SHA256 (PR 7703)
+* Memory usage improvements in wc_PRF, sha256 (for small code when many
+ registers are available) and sp_int objects (PR 7901)
+* Change in the configure script to work around ">>" with no command. In older
+ /bin/sh it can be ambiguous, as used in OS’s such as FreeBSD 9.2 (PR 7876)
+* Don't attempt to include system headers when not required (PR 7813)
+* Certificates: DER encoding of ECC signature algorithm parameter is now
+ allowed to be NULL with a define (PR 7903)
+* SP x86_64 asm: check for AVX2 support for VMs (PR 7979)
+* Update rx64n support on gr-rose (PR 7889)
+* Update FSP version to v5.4.0 for RA6M4 (PR 7994)
+* Update TSIP driver version to v1.21 for RX65N RSK (PR 7993)
+* Add a new crypto callback for RSA with padding (PR 7907)
+* Replaced the use of pqm4 with wolfSSL implementations of Kyber/MLDSA
+ (PR 7924)
+* Modernized memory fence support for C11 and clang (PR 7938)
+* Add a CRL error override callback (PR 7986)
+* Extend the X509 unknown extension callback for use with a user context
+ (PR 7730)
+* Additional debug error tracing added with TLS (PR 7917)
+* Added runtime support for library call stack traces with
+ –enable-debug-trace-errcodes=backtrace, using libbacktrace (PR 7846)
+* Expanded C89 conformance (PR 8077)
+* Expanded support for WOLFSSL_NO_MALLOC (PR 8065)
+* Added support for cross-compilation of Linux kernel module (PR 7746)
+* Updated Linux kernel module with support for kernel 6.11 and 6.12 (PR 7826)
+* Introduce WOLFSSL_ASN_ALLOW_0_SERIAL to allow parsing of certificates with a
+ serial number of 0 (PR 7893)
+* Add conditional repository_owner to all wolfSSL GitHub workflows (PR 7871)
+
+### Espressif / Arduino Updates
+* Update wolfcrypt settings.h for Espressif ESP-IDF, template update (PR 7953)
+* Update Espressif sha, util, mem, time helpers (PR 7955)
+* Espressif _thread_local_start and _thread_local_end fix (PR 8030)
+* Improve benchmark for Espressif devices (PR 8037)
+* Introduce Espressif common CONFIG_WOLFSSL_EXAMPLE_NAME, Kconfig (PR 7866)
+* Add wolfSSL esp-tls and Certificate Bundle Support for Espressif ESP-IDF
+ (PR 7936)
+* Update wolfssl Release for Arduino (PR 7775)
+
+### Post Quantum Crypto Updates
+* Dilithium: support fixed size arrays in dilithium_key (PR 7727)
+* Dilithium: add option to use precalc with small sign (PR 7744)
+* Allow Kyber to be built with FIPS (PR 7788)
+* Allow Kyber asm to be used in the Linux kernel module (PR 7872)
+* Dilithium, Kyber: Update to final specification (PR 7877)
+* Dilithium: Support FIPS 204 Draft and Final Draft (PR 7909,8016)
+
+### ARM Assembly Optimizations
+* ARM32 assembly optimizations added for ChaCha20 and Poly1305 (PR 8020)
+* Poly1305 assembly optimizations improvements for Aarch64 (PR 7859)
+* Poly1305 assembly optimizations added for Thumb-2 (PR 7939)
+* Adding ARM ASM build option to STM32CubePack (PR 7747)
+* Add ARM64 to Visual Studio Project (PR 8010)
+* Kyber assembly optimizations for ARM32 and Aarch64 (PR 8040,7998)
+* Kyber assembly optimizations for ARMv7E-M/ARMv7-M (PR 7706)
+
+
+## Fixes
+* ECC key load: fixes for certificates with parameters that are not default for
+ size (PR 7751)
+* Fixes for building x86 in Visual Studio for non-windows OS (PR 7884)
+* Fix for TLS v1.2 secret callback, incorrectly detecting bad master secret
+ (PR 7812)
+* Fixes for PowerPC assembly use with Darwin and SP math all (PR 7931)
+* Fix for detecting older versions of Mac OS when trying to link with
+ libdispatch (PR 7932)
+* Fix for DTLS1.3 downgrade to DTLS1.2 when the server sends multiple handshake
+ packets combined into a single transmission. (PR 7840)
+* Fix for OCSP to save the request if it was stored in ssl->ctx->certOcspRequest
+ (PR 7779)
+* Fix to OCSP for searching for CA by key hash instead of ext. key id (PR 7934)
+* Fix for staticmemory and singlethreaded build (PR 7737)
+* Fix to not allow Shake128/256 with Xilinx AFALG (PR 7708)
+* Fix to support PKCS11 without RSA key generation (PR 7738)
+* Fix not calling the signing callback when using PK callbacks + TLS 1.3
+ (PR 7761)
+* Cortex-M/Thumb2 ASM fix label for IAR compiler (PR 7753)
+* Fix with PKCS11 to iterate correctly over slotId (PR 7736)
+* Stop stripping out the sequence header on the AltSigAlg extension (PR 7710)
+* Fix ParseCRL_AuthKeyIdExt with ASN template to set extAuthKeyIdSet value
+ (PR 7742)
+* Use max key length for PSK encrypt buffer size (PR 7707)
+* DTLS 1.3 fix for size check to include headers and CID fixes (PR 7912,7951)
+* Fix STM32 Hash FIFO and add support for STM32U5A9xx (PR 7787)
+* Fix CMake build error for curl builds (PR 8021)
+* SP Maths: PowerPC ASM fix to use XOR instead of LI (PR 8038)
+* SSL loading of keys/certs: testing and fixes (PR 7789)
+* Misc. fixes for Dilithium and Kyber (PR 7721,7765,7803,8027,7904)
+* Fixes for building wolfBoot sources for PQ LMS/XMSS (PR 7868)
+* Fixes for building with Kyber enabled using CMake and zephyr port (PR 7773)
+* Fix for edge cases with session resumption with TLS 1.2 (PR 8097)
+* Fix issue with ARM ASM with AES CFB/OFB not initializing the "left" member
+ (PR 8099)
+
+
 # wolfSSL Release 5.7.2 (July 08, 2024)
 
 Release 5.7.2 has been developed according to wolfSSL's development and QA
@@ -89,6 +618,7 @@ Fixed in github pull request https://github.com/wolfSSL/wolfssl/pull/7702
 * Expanded OpenSSL compatibility layer and added EC_POINT_hex2point (PR 7191)
 
 ## Fixes
+* Fixed Kyber control-flow timing leak. Thanks to Antoon Purnal from PQShield for the report
 * Fixed the NXP MMCAU HW acceleration for SHA-256 (PR 7389)
 * Fixed AES-CFB1 encrypt/decrypt on size (8*x-1) bits (PR 7431)
 * Fixed use of %rip with SHA-256 x64 assembly (PR 7409)
@@ -219,7 +749,7 @@ fixed this omission in several PRs for this release.
 
 * [Low] CVE-2023-6936: A potential heap overflow read is possible in servers connecting over TLS 1.3 when the optional `WOLFSSL_CALLBACKS` has been defined. The out of bounds read can occur when a server receives a malicious malformed ClientHello. Users should either discontinue use of `WOLFSSL_CALLBACKS` on the server side or update versions of wolfSSL to 5.6.6. Thanks to the tlspuffin fuzzer team for the report which was designed and developed by; Lucca Hirschi (Inria, LORIA), Steve Kremer (Inria, LORIA), and Max Ammann (Trail of Bits). The fix for this issue is located in the following GitHub Pull Request: https://github.com/wolfSSL/wolfssl/pull/6949.
 
-* [Low] A side channel vulnerability with AES T-Tables is possible in a very controlled environment where precision sub-cache-line inspection can happen, such as inside an Intel SGX enclave. This can lead to recovery of the AES key. To prevent this type of attack, wolfSSL added an AES bitsliced implementation which can be enabled with the “`--enable-aes-bitsliced`” configure option. Thanks to Florian Sieck, Zhiyuan Zhang, Sebastian Berndt, Chitchanok Chuengsatiansup, Thomas Eisenbarth, and Yuval Yarom for the report (Universities of Lübeck, Melbourne, Adelaide and Bochum). The fix for this issue is located in the following GitHub Pull Request: https://github.com/wolfSSL/wolfssl/pull/6854.
+* [Low] CVE-2024-1543: A side channel vulnerability with AES T-Tables is possible in a very controlled environment where precision sub-cache-line inspection can happen, such as inside an Intel SGX enclave. This can lead to recovery of the AES key. To prevent this type of attack, wolfSSL added an AES bitsliced implementation which can be enabled with the “`--enable-aes-bitsliced`” configure option. Thanks to Florian Sieck, Zhiyuan Zhang, Sebastian Berndt, Chitchanok Chuengsatiansup, Thomas Eisenbarth, and Yuval Yarom for the report (Universities of Lübeck, Melbourne, Adelaide and Bochum). The fix for this issue is located in the following GitHub Pull Request: https://github.com/wolfSSL/wolfssl/pull/6854.
 
 * [Low] CVE-2023-6937: wolfSSL prior to 5.6.6 did not check that messages in a single (D)TLS record do not span key boundaries. As a result, it was possible to combine (D)TLS messages using different keys into one (D)TLS record. The most extreme edge case is that, in (D)TLS 1.3, it was possible that an unencrypted (D)TLS 1.3 record from the server containing first a ServerHello message and then the rest of the first server flight would be accepted by a wolfSSL client. In (D)TLS 1.3 the handshake is encrypted after the ServerHello but a wolfSSL client would accept an unencrypted flight from the server. This does not compromise key negotiation and authentication so it is assigned a low severity rating. Thanks to Johannes Wilson for the report (Sectra Communications and Linköping University). The fix for this issue is located in the following GitHub Pull Request: https://github.com/wolfSSL/wolfssl/pull/7029.
 
@@ -873,9 +1403,9 @@ Release 5.5.1 of wolfSSL embedded TLS has bug fixes and new features including:
 
 ## Enhancements
 * DTLSv1.3: Do HRR Cookie exchange by default
-* Add wolfSSL_EVP_PKEY_new_CMAC_key to OpenSSL compatible API 
-* Update ide win10 build files to add missing sp source files 
-* Improve Workbench docs 
+* Add wolfSSL_EVP_PKEY_new_CMAC_key to OpenSSL compatible API
+* Update ide win10 build files to add missing sp source files
+* Improve Workbench docs
 * Improve EVP support for CHACHA20_POLY1305
 * Improve `wc_SetCustomExtension` documentation
 * RSA-PSS with OCSP and add simple OCSP response DER verify test case
@@ -883,23 +1413,23 @@ Release 5.5.1 of wolfSSL embedded TLS has bug fixes and new features including:
 * Don't over-allocate memory for DTLS fragments
 * Add WOLFSSL_ATECC_TFLXTLS for Atmel port
 * SHA-3 performance improvements with x86_64 assembly
-* Add code to fallback to S/W if TSIP cannot handle 
+* Add code to fallback to S/W if TSIP cannot handle
 * Improves entropy with VxWorks
 * Make time in milliseconds 64-bits for longer session ticket lives
 * Support for setting cipher list with bytes
 * wolfSSL_set1_curves_list(), wolfSSL_CTX_set1_curves_list() improvements
 * Add to RSAES-OAEP key parsing for pkcs7
 * Add missing DN nid to work with PrintName()
-* SP int: default to 16 bit word size when NO_64BIT defined 
+* SP int: default to 16 bit word size when NO_64BIT defined
 * Limit the amount of fragments we store per a DTLS connection and error out when max limit is reached
 * Detect when certificate's RSA public key size is too big and fail on loading of certificate
 
 ## Fixes
 * Fix for async with OCSP non-blocking in `ProcessPeerCerts`
 * Fixes for building with 32-bit and socket size sign/unsigned mismatch
-* Fix Windows CMakeList compiler options 
-* TLS 1.3 Middle-Box compat: fix missing brace 
-* Configuration consistency fixes for RSA keys and way to force disable of private keys 
+* Fix Windows CMakeList compiler options
+* TLS 1.3 Middle-Box compat: fix missing brace
+* Configuration consistency fixes for RSA keys and way to force disable of private keys
 * Fix for Aarch64 Mac M1 SP use
 * Fix build errors and warnings for MSVC with DTLS 1.3
 * Fix HMAC compat layer function for SHA-1
@@ -907,9 +1437,9 @@ Release 5.5.1 of wolfSSL embedded TLS has bug fixes and new features including:
 * Check return from call to wc_Time
 * SP math: fix build configuration with opensslall
 * Fix for async session tickets
-* SP int mp_init_size fixes when SP_WORD_SIZE == 8 
+* SP int mp_init_size fixes when SP_WORD_SIZE == 8
 * Ed. function to make public key now checks for if the private key flag is set
-* Fix HashRaw WC_SHA256_DIGEST_SIZE for wc_Sha256GetHash 
+* Fix HashRaw WC_SHA256_DIGEST_SIZE for wc_Sha256GetHash
 * Fix for building with PSK only
 * Set correct types in wolfSSL_sk_*_new functions
 * Sanity check that size passed to mp_init_size() is no more than SP_INT_DIGITS
@@ -1023,7 +1553,7 @@ CVE-2020-12966 https://www.amd.com/en/corporate/product-security/bulletin/amd-sb
 * Update SP math all to not use sp_int_word when SQR_MUL_ASM is available
 ### SP Math Fixes
 * Fixes for constant time with div function
-* Fix casting warnings for Windows builds and assembly changes to support XMM6-15 being non-volatile 
+* Fix casting warnings for Windows builds and assembly changes to support XMM6-15 being non-volatile
 * Fix for div_word when not using div function
 * Fixes for user settings with SP ASM and ED/Curve25519 small
 * Additional Wycheproof tests ran and fixes
@@ -1203,7 +1733,7 @@ Release 5.3.0 of wolfSSL embedded TLS has bug fixes and new features including:
 ### Math Library Fixes
 * Sanity check with SP math that ECC points ordinates are not greater than modulus length
 * Additional sanity checks that _sp_add_d does not error due to overflow
-* Wycheproof fixes, testing integration, and fixes for AVX / AArch64 ASM edge case tests 
+* Wycheproof fixes, testing integration, and fixes for AVX / AArch64 ASM edge case tests
 * TFM fp_div_2_ct rework to avoid potential overflow
 
 ### Misc.
@@ -1444,7 +1974,7 @@ Release 5.1.0 of wolfSSL embedded TLS has bug fixes and new features including:
 ###### PORT Fixes
 * Building with Android wpa_supplicant and KeyStore
 * Setting initial value of CA certificate with TSIP enabled
-* Cryptocell ECC build fix and fix with RSA disabled 
+* Cryptocell ECC build fix and fix with RSA disabled
 * IoT-SAFE improvement for Key/File slot ID size, fix for C++ compile, and fixes for retrieving the public key after key generation
 
 ###### Math Library Fixes
@@ -1583,7 +2113,7 @@ Release 5.0.0 of wolfSSL embedded TLS has bug fixes and new features including:
     - SSL_SESSION_has_ticket()
     - SSL_SESSION_get_ticket_lifetime_hint()
     - DIST_POINT_new
-    - DIST_POINT_free 
+    - DIST_POINT_free
     - DIST_POINTS_free
     - CRL_DIST_POINTS_free
     - sk_DIST_POINT_push
@@ -1746,7 +2276,7 @@ Release 4.8.0 of wolfSSL embedded TLS has bug fixes and new features including:
 
 ### Vulnerabilities
 * [Low] CVE-2021-37155: OCSP request/response verification issue. In the case that the serial number in the OCSP request differs from the serial number in the OCSP response the error from the comparison was not resulting in a failed verification. We recommend users that have wolfSSL version 4.6.0 and 4.7.0 with OCSP enabled update their version of wolfSSL. Version 4.5.0 and earlier are not affected by this report. Thanks to Rainer Mueller-Amersdorffer, Roee Yankelevsky, Barak Gutman, Hila Cohen and Shoshi Berko (from CYMOTIVE Technologies and CARIAD) for the report.
-* [Low] CVE-2021-24116: Side-Channel cache look up vulnerability in base64 PEM decoding for versions of wolfSSL 4.5.0 and earlier. Versions 4.6.0 and up contain a fix and do not need to be updated for this report. If decoding a PEM format private key using version 4.5.0 and older of wolfSSL then we recommend updating the version of wolfSSL used. Thanks to Florian Sieck, Jan Wichelmann, Sebastian Berndt and Thomas Eisenbarth for the report. 
+* [Low] CVE-2021-24116: Side-Channel cache look up vulnerability in base64 PEM decoding for versions of wolfSSL 4.5.0 and earlier. Versions 4.6.0 and up contain a fix and do not need to be updated for this report. If decoding a PEM format private key using version 4.5.0 and older of wolfSSL then we recommend updating the version of wolfSSL used. Thanks to Florian Sieck, Jan Wichelmann, Sebastian Berndt and Thomas Eisenbarth for the report.
 
 ### New Feature Additions
 ###### New Product

Docker/Dockerfile

@@ -6,11 +6,11 @@ USER root
 # Set timezone to UTC
 RUN ln -snf /usr/share/zoneinfo/UTC /etc/localtime && echo UTC > /etc/timezone
 
-ARG DEPS_WOLFSSL="build-essential autoconf libtool clang clang-tools zlib1g-dev libuv1-dev libpam0g-dev valgrind git linux-headers-generic gcc-multilib g++-multilib libpcap-dev bubblewrap gdb iputils-ping lldb bsdmainutils netcat binutils-arm-linux-gnueabi binutils-aarch64-linux-gnu"
+ARG DEPS_WOLFSSL="build-essential autoconf libtool clang clang-tools zlib1g-dev libuv1-dev libpam0g-dev valgrind git linux-headers-generic gcc-multilib g++-multilib libpcap-dev bubblewrap gdb iputils-ping lldb bsdmainutils netcat-traditional binutils-arm-linux-gnueabi binutils-aarch64-linux-gnu"
 ARG DEPS_LIBOQS="astyle cmake gcc ninja-build libssl-dev python3-pytest python3-pytest-xdist unzip xsltproc doxygen graphviz python3-yaml valgrind git"
 ARG DEPS_UDP_PROXY="wget libevent-dev"
-ARG DEPS_TESTS="abi-dumper libcurl4-openssl-dev tcpdump libpsl-dev python3-pandas python3-tabulate libnl-genl-3-dev libcap-ng-dev"
-ARG DEPS_TOOLS="ccache clang-tidy maven"
+ARG DEPS_TESTS="abi-dumper libcurl4-openssl-dev tcpdump libpsl-dev python3-pandas python3-tabulate libnl-genl-3-dev libcap-ng-dev python3-virtualenv curl jq"
+ARG DEPS_TOOLS="ccache clang-tidy maven libfile-util-perl android-tools-adb usbutils shellcheck"
 RUN DEBIAN_FRONTEND=noninteractive apt update && apt install -y apt-utils \
                     && apt install -y ${DEPS_WOLFSSL} ${DEPS_LIBOQS} ${DEPS_UDP_PROXY} ${DEPS_TESTS} ${DEPS_TOOLS} \
                     && apt clean -y && rm -rf /var/lib/apt/lists/*
@@ -40,10 +40,12 @@ RUN cd /opt/sources && git clone --single-branch https://github.com/cisco/hash-s
 
 # Install pkixssh to /opt/pkixssh for X509 interop testing with wolfSSH
 RUN mkdir /var/empty
-RUN cd /opt/sources && wget -q -O- https://roumenpetrov.info/secsh/src/pkixssh-14.1.1.tar.gz | tar xzf - && cd pkixssh-14.1.1 && ./configure --prefix=/opt/pkixssh/ --exec-prefix=/opt/pkixssh/ && make install
+RUN cd /opt/sources && wget -q -O- https://roumenpetrov.info/secsh/src/pkixssh-15.1.tar.gz | tar xzf - && cd pkixssh-15.1 && ./configure --prefix=/opt/pkixssh/ --exec-prefix=/opt/pkixssh/ && make install
 
 # Install udp/tcp-proxy
 RUN cd /opt/sources && git clone --depth=1 --single-branch --branch=main http://github.com/wolfssl/udp-proxy && cd udp-proxy && make && cp tcp_proxy udp_proxy /bin/.
+# Install libbacktrace
+RUN cd /opt/sources && git clone --depth=1 --single-branch https://github.com/ianlancetaylor/libbacktrace.git && cd libbacktrace && mkdir build && cd build && ../configure && make && make install
 
 # Allow non-root to use tcpdump (will need NET_RAW and NET_ADMIN capability when running the container)
 RUN setcap 'CAP_NET_RAW+eip CAP_NET_ADMIN+eip' /usr/bin/tcpdump

Docker/buildAndPush.sh

@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/usr/bin/env bash
 
 # Assume we're in wolfssl/Docker
 WOLFSSL_DIR=$(builtin cd ${BASH_SOURCE%/*}/..; pwd)
@@ -18,18 +18,37 @@ docker build -t wolfssl/wolfssl-builder:${CUR_DATE} ${DOCKER_BUILD_OPTIONS} "${W
     docker tag wolfssl/testing-cross-compiler:${CUR_DATE} wolfssl/testing-cross-compiler:latest
 
 if [ $? -eq 0 ]; then
-    echo "Pushing containers to DockerHub"
-    docker push wolfssl/wolfssl-builder:${CUR_DATE} && docker push wolfssl/wolfssl-builder:latest && \
-        docker push wolfssl/testing-cross-compiler:${CUR_DATE} && docker push wolfssl/testing-cross-compiler:latest
+    echo "Push containers to DockerHub [y/N]? "
+    read val
+    if [ "$val" = "y" ]; then
+        docker push wolfssl/wolfssl-builder:${CUR_DATE} && docker push wolfssl/wolfssl-builder:latest && \
+            docker push wolfssl/testing-cross-compiler:${CUR_DATE} && docker push wolfssl/testing-cross-compiler:latest
+        if [ $? -ne 0 ]; then
+            echo "Warning: push failed. Continuing"
+            ((NUM_FAILURES++))
+        fi
+    fi
 else
     echo "Warning: Build wolfssl/wolfssl-builder failed. Continuing"
     ((NUM_FAILURES++))
 fi
 
 echo "Building wolfssl/wolfCLU:${CUR_DATE}"
-docker buildx build --pull --push --build-arg DUMMY=${CUR_DATE} -t wolfssl/wolfclu:${CUR_DATE} --platform=linux/amd64,linux/arm64,linux/arm/v7 "${WOLFSSL_DIR}/Docker/wolfCLU" && \
-docker buildx build --pull --push --build-arg DUMMY=${CUR_DATE} -t wolfssl/wolfclu:latest      --platform=linux/amd64,linux/arm64,linux/arm/v7 "${WOLFSSL_DIR}/Docker/wolfCLU"
-if [ $? -ne 0 ]; then
+DOCKER_ARGS="--pull --build-arg DUMMY=${CUR_DATE} --platform=linux/amd64,linux/arm64,linux/arm/v7 ${WOLFSSL_DIR}/Docker/wolfCLU"
+docker buildx build -t wolfssl/wolfclu:${CUR_DATE} ${DOCKER_ARGS} && \
+    docker buildx build -t wolfssl/wolfclu:latest ${DOCKER_ARGS}
+if [ $? -eq 0 ]; then
+    echo "Push containers to DockerHub [y/N]? "
+    read val
+    if [ "$val" = "y" ]; then
+        docker buildx build ${DOCKER_ARGS} --push -t wolfssl/wolfclu:${CUR_DATE} && \
+            docker buildx build ${DOCKER_ARGS} --push -t wolfssl/wolfclu:latest
+        if [ $? -ne 0 ]; then
+            echo "Warning: push failed. Continuing"
+            ((NUM_FAILURES++))
+        fi
+    fi
+else
     echo "Warning: Build wolfssl/wolfclu failed. Continuing"
     ((NUM_FAILURES++))
 fi

Docker/run.sh

@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/usr/bin/env bash
 
 echo "Running with \"${*}\"..."
 

Docker/wolfCLU/Dockerfile

@@ -1,9 +1,9 @@
 ARG DOCKER_BASE_IMAGE=ubuntu
-FROM ubuntu as BUILDER
+FROM ubuntu AS builder
 
-ARG DEPS_WOLFSSL="build-essential autoconf libtool zlib1g-dev libuv1-dev libpam0g-dev git libpcap-dev libcurl4-openssl-dev bsdmainutils netcat iputils-ping bubblewrap"
+ARG DEPS_WOLFSSL="build-essential autoconf libtool zlib1g-dev libuv1-dev libpam0g-dev git libpcap-dev libcurl4-openssl-dev bsdmainutils netcat-traditional iputils-ping bubblewrap"
 RUN DEBIAN_FRONTEND=noninteractive apt update && apt install -y apt-utils \
-                    && apt install -y ${DEPS_WOLFSSL} ${DEPS_LIBOQS} \
+                    && apt install -y ${DEPS_WOLFSSL} \
                     && apt clean -y && rm -rf /var/lib/apt/lists/*
 
 ARG NUM_CPU=16
@@ -18,8 +18,8 @@ RUN git clone --depth=1 --single-branch --branch=main http://github.com/wolfssl/
 
 FROM ${DOCKER_BASE_IMAGE}
 USER root
-COPY --from=BUILDER /usr/local/lib/libwolfssl.so /usr/local/lib/
-COPY --from=BUILDER /usr/local/bin/wolfssl* /usr/local/bin/
+COPY --from=builder /usr/local/lib/libwolfssl.so /usr/local/lib/
+COPY --from=builder /usr/local/bin/wolfssl* /usr/local/bin/
 RUN ldconfig
 ENTRYPOINT ["/usr/local/bin/wolfssl"]
 LABEL org.opencontainers.image.source=https://github.com/wolfssl/wolfssl

Docker/wolfCLU/README.md

@@ -1,6 +1,6 @@
 This is a small container that has wolfCLU installed for quick access. To build your own run the following:
 ```
-docker build --pull --build-arg DUMMY=$(date +%s) -t wolfclu . 
+docker build --pull --build-arg DUMMY=$(date +%s) -t wolfclu .
 ```
 
 To run the container, you can use:

Docker/yocto/buildAndPush.sh

@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/usr/bin/env bash
 
 # Assume we're in wolfssl/Docker/yocto
 WOLFSSL_DIR=$(builtin cd ${BASH_SOURCE%/*}/../..; pwd)

IDE/ARDUINO/Arduino_README_prepend.md

@@ -4,10 +4,46 @@ This library is restructured from [wolfSSL](https://github.com/wolfSSL/wolfssl/)
 
 The Official wolfSSL Arduino Library is found in [The Library Manager index](http://downloads.arduino.cc/libraries/library_index.json).
 
-See the [Arduino-wolfSSL logs](https://downloads.arduino.cc/libraries/logs/github.com/wolfSSL/Arduino-wolfSSL/).
+See the [Arduino-wolfSSL logs](https://downloads.arduino.cc/libraries/logs/github.com/wolfSSL/Arduino-wolfSSL/) for publishing status.
+
+Instructions for installing and using libraries can be found in the [Arduino docs](https://docs.arduino.cc/software/ide-v1/tutorials/installing-libraries/).
+
+## wolfSSL Configuration
+
+As described in the [Getting Started with wolfSSL on Arduino](https://www.wolfssl.com/getting-started-with-wolfssl-on-arduino/), wolfSSL features are enabled and disabled in the `user_settings.h` file.
+
+The `user_settings.h` file is found in the `<Arduino>/libraries/wolfssl/src` directory.
+
+For Windows this is typically `C:\Users\%USERNAME%\Documents\Arduino\libraries\wolfssl\src`
+
+For Mac: `~/Documents/Arduino/libraries/wolfssl/src`
+
+For Linux: `~/Arduino/libraries/wolfssl/src`
+
+Tips for success:
+
+- The `WOLFSSL_USER_SETTINGS` macro must be defined project-wide. (see [wolfssl.h](https://github.com/wolfSSL/wolfssl/blob/master/IDE/ARDUINO/wolfssl.h))
+- Apply any customizations only to `user_settings.h`;  Do not edit wolfSSL `settings.h` or `configh.h` files.
+- Do not explicitly include `user_settings.h` in any source file.
+- For every source file that uses wolfssl, include `wolfssl/wolfcrypt/settings.h` before any other wolfSSL include, typically via `#include "wolfssl.h"`.
+- See the [wolfSSL docs](https://www.wolfssl.com/documentation/manuals/wolfssl/chapter02.html) for details on build configuration macros.
+
+## wolfSSL Examples
+
+Additional wolfSSL examples can be found at:
+
+- https://github.com/wolfSSL/wolfssl/tree/master/IDE/ARDUINO
+
+- https://github.com/wolfSSL/wolfssl/tree/master/examples
+
+- https://github.com/wolfSSL/wolfssl-examples/
 
 ## Arduino Releases
 
-The first Official wolfSSL Arduino Library is `5.6.6-Arduino.1`: a slightly modified, post [release 5.6.6](https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.6-stable) version update.
+This release of wolfSSL is version [5.7.6](https://github.com/wolfSSL/wolfssl/releases/tag/v5.7.6-stable).
 
-See other [wolfSSL releases versions](https://github.com/wolfSSL/wolfssl/releases). The `./wolfssl-arduino.sh INSTALL` [script](https://github.com/wolfSSL/wolfssl/tree/master/IDE/ARDUINO) can be used to install specific GitHub versions as needed.
+See GitHub for [all Arduino wolfSSL releases](https://github.com/wolfSSL/Arduino-wolfSSL/releases).
+
+The first Official wolfSSL Arduino Library was `5.6.6-Arduino.1`: a slightly modified, post [release 5.6.6](https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.6-stable) version update.
+
+The `./wolfssl-arduino.sh INSTALL` [script](https://github.com/wolfSSL/wolfssl/tree/master/IDE/ARDUINO) can be used to install specific GitHub versions as needed.

IDE/ARDUINO/README.md

@@ -2,18 +2,49 @@
 
 See the [example sketches](./sketches/README.md):
 
-- [sketches/wolfssl_server](./sketches/wolfssl_server/README.md)
-- [sketches/wolfssl_client](./sketches/wolfssl_client/README.md)
+NOTE: Moving; See https://github.com/wolfSSL/wolfssl-examples/pull/499
+
+Bare-bones templates:
+
+- [sketches/wolfssl_version](./sketches/wolfssl_version/README.md) single file.
+- [sketches/template](./sketches/template/README.md) multiple file example.
+
+Functional examples:
+- [sketches/wolfssl_AES_CTR](./sketches/wolfssl_AES_CTR/README.md) AES CTR Encrypt / decrypt.
+- [sketches/wolfssl_client](./sketches/wolfssl_client/README.md) TLS Client.
+- [sketches/wolfssl_server](./sketches/wolfssl_server/README.md) TLS Server.
+
+Both the `template` and `wolfssl_AES_CTR` examples include VisualGDB project files.
 
 When publishing a new version to the Arduino Registry, be sure to edit `WOLFSSL_VERSION_ARUINO_SUFFIX` in the `wolfssl-arduino.sh` script.
 
+## Getting Started
+
+See [Getting Started with wolfSSL on Arduino](https://www.wolfssl.com/getting-started-with-wolfssl-on-arduino/), wolfSSL features are enabled and disabled in the `user_settings.h` file.
+
+The `user_settings.h` file is found in the `<Arduino>/libraries/wolfssl/src` directory.
+
+For Windows this is typically `C:\Users\%USERNAME%\Documents\Arduino\libraries\wolfssl\src`
+
+For Mac: `~/Documents/Arduino/libraries/wolfssl/src`
+
+For Linux: `~/Arduino/libraries/wolfssl/src`
+
+Tips for success:
+
+- The `WOLFSSL_USER_SETTINGS` macro must be defined project-wide. (see [wolfssl.h](https://github.com/wolfSSL/wolfssl/blob/master/IDE/ARDUINO/wolfssl.h))
+- Apply any customizations only to `user_settings.h`;  Do not edit wolfSSL `settings.h` or `configh.h` files.
+- Do not explicitly include `user_settings.h` in any source file.
+- For every source file that uses wolfssl, include `wolfssl/wolfcrypt/settings.h` before any other wolfSSL include, typically via `#include "wolfssl.h"`.
+- See the [wolfSSL docs](https://www.wolfssl.com/documentation/manuals/wolfssl/chapter02.html) for details on build configuration macros.
+
 ## Boards
 
 Many of the supported boards are natively built-in to the [Arduino IDE Board Manager](https://docs.arduino.cc/software/ide-v2/tutorials/ide-v2-board-manager/)
 and by adding [additional cores](https://docs.arduino.cc/learn/starting-guide/cores/) as needed.
 
 STM32 Support can be added by including this link in the "Additional Boards Managers URLs" field
-from [stm32duino/Arduino_Core_STM32](https://github.com/stm32duino/Arduino_Core_STM32?tab=readme-ov-file#getting-started)   .
+from [stm32duino/Arduino_Core_STM32](https://github.com/stm32duino/Arduino_Core_STM32?tab=readme-ov-file#getting-started).
 
 ```
 https://github.com/stm32duino/BoardManagerFiles/raw/main/package_stmicroelectronics_index.json
@@ -27,7 +58,7 @@ This option will allow wolfSSL to be installed directly using the native Arduino
 
 ## Manually Reformatting wolfSSL as a Compatible Arduino Library
 
-Use [this](./wolfssl-arduino.sh) shell script that will re-organize the wolfSSL library to be 
+Use [this](./wolfssl-arduino.sh) shell script that will re-organize the wolfSSL library to be
 compatible with [Arduino Library Specification](https://arduino.github.io/arduino-cli/0.35/library-specification/)
 for projects that use Arduino IDE 1.5.0 or newer.
 
@@ -42,7 +73,7 @@ from within the `wolfssl/IDE/ARDUINO` directory:
 
 1. `./wolfssl-arduino.sh`
     - Creates an Arduino Library directory structure in the local `wolfSSL` directory of `IDE/ARDUINO`.
-    - You can add your own `user_settings.h`, or copy/rename the [default](../../examples/configs/user_settings_arduino.h).
+    - You can add your own `user_settings.h`, or copy/rename the [default](https://github.com/wolfSSL/wolfssl/blob/master/examples/configs/user_settings_arduino.h).
 
 2. `./wolfssl-arduino.sh INSTALL` (The most common option)
     - Creates an Arduino Library in the local `wolfSSL` directory
@@ -55,8 +86,8 @@ from within the `wolfssl/IDE/ARDUINO` directory:
 3. `./wolfssl-arduino.sh INSTALL /path/to/repository` (Used to update [arduino-wolfSSL](https://github.com/wolfSSL/arduino-wolfSSL))
     - Creates an Arduino Library in `wolfSSL` directory
     - Copies that directory contents to the specified `/path/to/repository`
-    - Adds the [default](../../examples/configs/user_settings_arduino.h) as `user_settings.h`. 
-     
+    - Adds the [default](../../examples/configs/user_settings_arduino.h) as `user_settings.h`.
+
 4. `./wolfssl-arduino.sh INSTALL /path/to/any/other/directory`
     - Creates an Arduino Library in `wolfSSL` directory
     - Copies that directory contents to the specified `/path/to/any/other/directory`

IDE/ARDUINO/include.am

@@ -2,16 +2,32 @@
 # included from Top Level Makefile.am
 # All paths should be given relative to the root
 
+# Library files:
 EXTRA_DIST+= IDE/ARDUINO/README.md
+
+# There's an Arduino-specific Arduino_README_prepend.md that will be prepended to wolfSSL README.md
+# Not to be confused with the interim PREPENDED_README.md that is created by script.
 EXTRA_DIST+= IDE/ARDUINO/Arduino_README_prepend.md
+
+# Core library files
+EXTRA_DIST+= IDE/ARDUINO/wolfssl.h
+EXTRA_DIST+= IDE/ARDUINO/wolfssl.h
+EXTRA_DIST+= IDE/ARDUINO/wolfssl-arduino.cpp
+
 EXTRA_DIST+= IDE/ARDUINO/keywords.txt
 EXTRA_DIST+= IDE/ARDUINO/library.properties.template
+
+# Sketch Examples
 EXTRA_DIST+= IDE/ARDUINO/sketches/README.md
+
+# wolfssl_client example sketch
 EXTRA_DIST+= IDE/ARDUINO/sketches/wolfssl_client/README.md
-EXTRA_DIST+= IDE/ARDUINO/sketches/wolfssl_client/wolfssl_client.ino
+
+# wolfssl_server example sketch
 EXTRA_DIST+= IDE/ARDUINO/sketches/wolfssl_server/README.md
-EXTRA_DIST+= IDE/ARDUINO/sketches/wolfssl_server/wolfssl_server.ino
+
+# wolfssl_version example sketch
 EXTRA_DIST+= IDE/ARDUINO/sketches/wolfssl_version/README.md
-EXTRA_DIST+= IDE/ARDUINO/sketches/wolfssl_version/wolfssl_version.ino
-EXTRA_DIST+= IDE/ARDUINO/wolfssl.h
+
+# Publishing script, either local install or to github.com/wolfSSL/Arduino-wolfSSL clone directory.
 EXTRA_DIST+= IDE/ARDUINO/wolfssl-arduino.sh

IDE/ARDUINO/sketches/README.md

@@ -1,12 +1,75 @@
 # wolfSSL Arduino Examples
 
-There are currently two example Arduino sketches:
+There are currently five example Arduino sketches:
 
-* [wolfssl_client](./wolfssl_client/README.md): Basic TLS listening client.
-* [wolfssl_server](./wolfssl_server/README.md): Basic TLS server.
+NOTE: Moving; See https://github.com/wolfSSL/wolfssl-examples/pull/499
+
+* `template`: Reference template wolfSSL example, including optional VisualGDB project files.
+* `wolfssl_AES_CTR`: Basic AES CTR Encryption / Decryption example.
+* `wolfssl_client`: Basic TLS listening client.
+* `wolfssl_server`: Basic TLS server.
+* `wolfssl_version`: Bare-bones wolfSSL example.
 
 Examples have been most recently confirmed operational on the
 [Arduino IDE](https://www.arduino.cc/en/software) 2.2.1.
 
 For examples on other platforms, see the [IDE directory](https://github.com/wolfssl/wolfssl/tree/master/IDE).
-Additional examples can be found on [wolfSSL/wolfssl-examples](https://github.com/wolfSSL/wolfssl-examples/).
+Additional wolfssl examples can be found at [wolfSSL/wolfssl-examples](https://github.com/wolfSSL/wolfssl-examples/).
+
+## Using wolfSSL
+
+The typical include will look something like this:
+
+```
+#include <Arduino.h>
+
+ /* wolfSSL user_settings.h must be included from settings.h
+  * Make all configurations changes in user_settings.h
+  * Do not edit wolfSSL `settings.h` or `config.h` files.
+  * Do not explicitly include user_settings.h in any source code.
+  * Each Arduino sketch that uses wolfSSL must have: #include "wolfssl.h"
+  * C/C++ source files can use: #include <wolfssl/wolfcrypt/settings.h>
+  * The wolfSSL "settings.h" must be included in each source file using wolfSSL.
+  * The wolfSSL "settings.h" must appear before any other wolfSSL include.
+  */
+#include <wolfssl.h>
+
+/* settings.h is typically included in wolfssl.h, but here as a reminder: */
+#include <wolfssl/wolfcrypt/settings.h>
+
+/* Any other wolfSSL includes follow:*
+#include <wolfssl/version.h>
+```
+
+## Configuring wolfSSL
+
+See the `user_settings.h` in the Arduino library `wolfssl/src` directory. For Windows users this is typically:
+
+```
+C:\Users\%USERNAME%\Documents\Arduino\libraries\wolfssl\src
+```
+
+WARNING: Changes to the library `user_settings.h` file will be lost when upgrading wolfSSL using the Arduino IDE.
+
+## Troubleshooting
+
+If compile problems are encountered, for example:
+
+```
+ctags: cannot open temporary file : File exists
+exit status 1
+
+Compilation error: exit status 1
+```
+
+Try deleting the Arduino cache directory:
+
+```
+C:\Users\%USERNAME%\AppData\Local\arduino\sketches
+```
+
+For VisualGDB users, delete the project `.vs`, `Output`, and `TraceReports` directories.
+
+## More Information
+
+For more details, see [IDE/ARDUINO/README.md](https://github.com/wolfSSL/wolfssl/blob/master/IDE/ARDUINO/README.md)

IDE/ARDUINO/sketches/wolfssl_client/README.md

@@ -1,6 +1,14 @@
 # Arduino Basic TLS Listening Client
 
-Open the [wolfssl_client.ino](./wolfssl_client.ino) file in the Arduino IDE.
+Open the `wolfssl_client.ino` file in the Arduino IDE.
+
+NOTE: Moving; See https://github.com/wolfSSL/wolfssl-examples/pull/499
+
+If using WiFi, be sure to set `ssid` and `password` values.
+
+May need "Ethernet by Various" library to be installed. Tested with v2.0.2 and v2.8.1.
+
+See the `#define WOLFSSL_TLS_SERVER_HOST` to set your own server address.
 
 Other IDE products are also supported, such as:
 

IDE/ARDUINO/sketches/wolfssl_client/wolfssl_client.ino

@@ -1,894 +0,0 @@
-/* wolfssl_client.ino
- *
- * Copyright (C) 2006-2023 wolfSSL Inc.
- *
- * This file is part of wolfSSL.
- *
- * wolfSSL is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * wolfSSL is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
- */
-
-/*
-Tested with:
-
-1) Intel Galileo acting as the Client, with a laptop acting as a server using
-   the server example provided in examples/server.
-   Legacy Arduino v1.86 was used to compile and program the Galileo
-
-2) Espressif ESP32 WiFi
-
-3) Arduino Due, Nano33 IoT, Nano RP-2040
-*/
-
-/*
- * Note to code editors: the Arduino client and server examples are edited in
- * parallel for side-by-side comparison between examples.
- */
-
-/* If you have a private include, define it here, otherwise edit WiFi params */
-#define MY_PRIVATE_CONFIG "/workspace/my_private_config.h"
-
-/* set REPEAT_CONNECTION to a non-zero value to continually run the example. */
-#define REPEAT_CONNECTION 0
-
-/* Edit this with your other TLS host server address to connect to: */
-#define WOLFSSL_TLS_SERVER_HOST "192.168.1.39"
-
-/* wolfssl TLS examples communicate on port 11111 */
-#define WOLFSSL_PORT 11111
-
-/* Choose a monitor serial baud rate: 9600, 14400, 19200, 57600, 74880, etc. */
-#define SERIAL_BAUD 115200
-
-/* We'll wait up to 2000 milliseconds to properly shut down connection */
-#define SHUTDOWN_DELAY_MS 2000
-
-/* Number of times to retry connection.  */
-#define RECONNECT_ATTEMPTS 20
-
-/* Optional stress test. Define to consume memory until exhausted: */
-/* #define MEMORY_STRESS_TEST */
-
-/* Choose client or server example, not both. */
-#define WOLFSSL_CLIENT_EXAMPLE
-/* #define WOLFSSL_SERVER_EXAMPLE */
-
-#if defined(MY_PRIVATE_CONFIG)
-    /* the /workspace directory may contain a private config
-     * excluded from GitHub with items such as WiFi passwords */
-    #include MY_PRIVATE_CONFIG
-    static const char* ssid PROGMEM = MY_ARDUINO_WIFI_SSID;
-    static const char* password PROGMEM = MY_ARDUINO_WIFI_PASSWORD;
-#else
-    /* when using WiFi capable boards: */
-    static const char* ssid PROGMEM  = "your_SSID";
-    static const char* password PROGMEM = "your_PASSWORD";
-#endif
-
-#define BROADCAST_ADDRESS "255.255.255.255"
-
-/* There's an optional 3rd party NTPClient library by Fabrice Weinberg.
- * If it is installed, uncomment define USE_NTP_LIB here: */
-/* #define USE_NTP_LIB */
-#ifdef USE_NTP_LIB
-    #include <NTPClient.h>
-#endif
-
-#include <wolfssl.h>
-/* Important: make sure settings.h appears before any other wolfSSL headers */
-#include <wolfssl/wolfcrypt/settings.h>
-/* Reminder: settings.h includes user_settings.h
- * For ALL project wolfSSL settings, see:
- * [your path]/Arduino\libraries\wolfSSL\src\user_settings.h   */
-#include <wolfssl/ssl.h>
-#include <wolfssl/certs_test.h>
-#include <wolfssl/wolfcrypt/error-crypt.h>
-
-/* Define DEBUG_WOLFSSL in user_settings.h for more verbose logging. */
-#if defined(DEBUG_WOLFSSL)
-    #define PROGRESS_DOT F("")
-#else
-    #define PROGRESS_DOT F(".")
-#endif
-
-/* Convert a macro to a string */
-#define xstr(x) str(x)
-#define str(x) #x
-
-/* optional board-specific networking includes */
-#if defined(ESP32)
-    #define USING_WIFI
-    #include <WiFi.h>
-    #include <WiFiUdp.h>
-    #ifdef USE_NTP_LIB
-        WiFiUDP ntpUDP;
-    #endif
-    /* Ensure the F() flash macro is defined */
-    #ifndef F
-        #define F
-    #endif
-    WiFiClient client;
-
-#elif defined(ESP8266)
-    #define USING_WIFI
-    #include <ESP8266WiFi.h>
-    WiFiClient client;
-
-#elif defined(ARDUINO_SAM_DUE)
-    #include <SPI.h>
-    /* There's no WiFi/Ethernet on the Due. Requires Ethernet Shield.
-    /* Needs "Ethernet by Various" library to be installed. Tested with V2.0.2 */
-    #include <Ethernet.h>
-    EthernetClient client;
-
-#elif defined(ARDUINO_SAMD_NANO_33_IOT)
-    #define USING_WIFI
-    #include <SPI.h>
-    #include <WiFiNINA.h> /* Needs Arduino WiFiNINA library installed manually */
-    WiFiClient client;
-
-#elif defined(ARDUINO_ARCH_RP2040)
-    #define USING_WIFI
-    #include <SPI.h>
-    #include <WiFiNINA.h>
-    WiFiClient client;
-
-#elif defined(USING_WIFI)
-    #define USING_WIFI
-    #include <WiFi.h>
-    #include <WiFiUdp.h>
-    #ifdef USE_NTP_LIB
-        WiFiUDP ntpUDP;
-    #endif
-    WiFiClient client;
-
-/* TODO
-#elif defined(OTHER_BOARD)
-*/
-#else
-    #define USING_WIFI
-    WiFiClient client;
-
-#endif
-
-/* Only for syntax highlighters to show interesting options enabled: */
-#if defined(HAVE_SNI)                           \
-   || defined(HAVE_MAX_FRAGMENT)                  \
-   || defined(HAVE_TRUSTED_CA)                    \
-   || defined(HAVE_TRUNCATED_HMAC)                \
-   || defined(HAVE_CERTIFICATE_STATUS_REQUEST)    \
-   || defined(HAVE_CERTIFICATE_STATUS_REQUEST_V2) \
-   || defined(HAVE_SUPPORTED_CURVES)              \
-   || defined(HAVE_ALPN)                          \
-   || defined(HAVE_SESSION_TICKET)                \
-   || defined(HAVE_SECURE_RENEGOTIATION)          \
-   || defined(HAVE_SERVER_RENEGOTIATION_INFO)
-#endif
-
-static const char host[] PROGMEM = WOLFSSL_TLS_SERVER_HOST; /* server to connect to */
-static const int port PROGMEM = WOLFSSL_PORT; /* port on server to connect to */
-
-static WOLFSSL_CTX* ctx = NULL;
-static WOLFSSL* ssl = NULL;
-static char* wc_error_message = (char*)malloc(80 + 1);
-static char errBuf[80];
-
-#if defined(MEMORY_STRESS_TEST)
-    #define MEMORY_STRESS_ITERATIONS 100
-    #define MEMORY_STRESS_BLOCK_SIZE 1024
-    #define MEMORY_STRESS_INITIAL (4*1024)
-    static char* memory_stress[MEMORY_STRESS_ITERATIONS]; /* typically 1K per item */
-    static int mem_ctr        = 0;
-#endif
-
-static int EthernetSend(WOLFSSL* ssl, char* msg, int sz, void* ctx);
-static int EthernetReceive(WOLFSSL* ssl, char* reply, int sz, void* ctx);
-static int reconnect = RECONNECT_ATTEMPTS;
-static int lng_index PROGMEM = 0; /* 0 = English */
-
-#if defined(__arm__)
-    #include <malloc.h>
-    extern char _end;
-    extern "C" char *sbrk(int i);
-    static char *ramstart=(char *)0x20070000;
-    static char *ramend=(char *)0x20088000;
-#endif
-
-/*****************************************************************************/
-/* fail_wait - in case of unrecoverable error                                */
-/*****************************************************************************/
-int fail_wait(void) {
-    show_memory();
-
-    Serial.println(F("Failed. Halt."));
-    while (1) {
-        delay(1000);
-    }
-    return 0;
-}
-
-/*****************************************************************************/
-/* show_memory() to optionally view during debugging.                         */
-/*****************************************************************************/
-int show_memory(void)
-{
-#if defined(__arm__)
-    struct mallinfo mi = mallinfo();
-
-    char *heapend=sbrk(0);
-    register char * stack_ptr asm("sp");
-    #if defined(DEBUG_WOLFSSL_VERBOSE)
-        Serial.print("    arena=");
-        Serial.println(mi.arena);
-        Serial.print("  ordblks=");
-        Serial.println(mi.ordblks);
-        Serial.print(" uordblks=");
-        Serial.println(mi.uordblks);
-        Serial.print(" fordblks=");
-        Serial.println(mi.fordblks);
-        Serial.print(" keepcost=");
-        Serial.println(mi.keepcost);
-    #endif
-
-    #if defined(DEBUG_WOLFSSL) || defined(MEMORY_STRESS_TEST)
-        Serial.print("Estimated free memory: ");
-        Serial.print(stack_ptr - heapend + mi.fordblks);
-        Serial.println(F(" bytes"));
-    #endif
-
-    #if (0)
-        /* Experimental: not supported on all devices: */
-        Serial.print("RAM Start %lx\n", (unsigned long)ramstart);
-        Serial.print("Data/Bss end %lx\n", (unsigned long)&_end);
-        Serial.print("Heap End %lx\n", (unsigned long)heapend);
-        Serial.print("Stack Ptr %lx\n",(unsigned long)stack_ptr);
-        Serial.print("RAM End %lx\n", (unsigned long)ramend);
-
-        Serial.print("Heap RAM Used: ",mi.uordblks);
-        Serial.print("Program RAM Used ",&_end - ramstart);
-        Serial.print("Stack RAM Used ",ramend - stack_ptr);
-
-        Serial.print("Estimated Free RAM: %d\n\n",stack_ptr - heapend + mi.fordblks);
-    #endif
-#else
-    Serial.println(F("show_memory() not implemented for this platform"));
-#endif
-    return 0;
-}
-
-/*****************************************************************************/
-/* EthernetSend() to send a message string.                                  */
-/*****************************************************************************/
-int EthernetSend(WOLFSSL* ssl, char* message, int sz, void* ctx) {
-    int sent = 0;
-    (void)ssl;
-    (void)ctx;
-
-    sent = client.write((byte*)message, sz);
-    return sent;
-}
-
-/*****************************************************************************/
-/* EthernetReceive() to receive a reply string.                              */
-/*****************************************************************************/
-int EthernetReceive(WOLFSSL* ssl, char* reply, int sz, void* ctx) {
-    int ret = 0;
-    (void)ssl;
-    (void)ctx;
-
-    while (client.available() > 0 && ret < sz) {
-        reply[ret++] = client.read();
-    }
-    return ret;
-}
-
-/*****************************************************************************/
-/* Arduino setup_hardware()                                                  */
-/*****************************************************************************/
-int setup_hardware(void) {
-    int ret = 0;
-
-#if defined(ARDUINO_SAMD_NANO_33_IOT)
-    Serial.println(F("Detected known tested and working Arduino Nano 33 IoT"));
-#elif defined(ARDUINO_ARCH_RP2040)
-    Serial.println(F("Detected known tested and working Arduino RP-2040"));
-#elif defined(__arm__) && defined(ID_TRNG) && defined(TRNG)
-    /* need to manually turn on random number generator on Arduino Due, etc. */
-    pmc_enable_periph_clk(ID_TRNG);
-    trng_enable(TRNG);
-    Serial.println(F("Enabled ARM TRNG"));
-#endif
-
-    show_memory();
-    randomSeed(analogRead(0));
-    return ret;
-}
-
-/*****************************************************************************/
-/* Arduino setup_datetime()                                                  */
-/*   The device needs to have a valid date within the valid range of certs.  */
-/*****************************************************************************/
-int setup_datetime(void) {
-    int ret = 0;
-    int ntp_tries = 20;
-
-    /* we need a date in the range of cert expiration */
-#ifdef USE_NTP_LIB
-    #if defined(ESP32)
-        NTPClient timeClient(ntpUDP, "pool.ntp.org");
-
-        timeClient.begin();
-        timeClient.update();
-        delay(1000);
-        while (!timeClient.isTimeSet() && (ntp_tries > 0)) {
-            timeClient.forceUpdate();
-            Serial.println(F("Waiting for NTP update"));
-            delay(2000);
-            ntp_tries--;
-        }
-        if (ntp_tries <= 0) {
-            Serial.println(F("Warning: gave up waiting on NTP"));
-        }
-        Serial.println(timeClient.getFormattedTime());
-        Serial.println(timeClient.getEpochTime());
-    #endif
-#endif
-
-#if defined(ESP32)
-    /* see esp32-hal-time.c */
-    ntp_tries = 5;
-    /* Replace "pool.ntp.org" with your preferred NTP server */
-    configTime(0, 0, "pool.ntp.org");
-
-    /* Wait for time to be set */
-    while ((time(nullptr) <= 100000) && ntp_tries > 0) {
-        Serial.println(F("Waiting for time to be set..."));
-        delay(2000);
-        ntp_tries--;
-    }
-#endif
-
-    return ret;
-} /* setup_datetime */
-
-/*****************************************************************************/
-/* Arduino setup_network()                                                   */
-/*****************************************************************************/
-int setup_network(void) {
-    int ret = 0;
-
-#if defined(USING_WIFI)
-    int status = WL_IDLE_STATUS;
-
-    /* The ESP8266 & ESP32 support both AP and STA. We'll use STA: */
-    #if defined(ESP8266) || defined(ESP32)
-        WiFi.mode(WIFI_STA);
-    #else
-        String fv;
-        if (WiFi.status() == WL_NO_MODULE) {
-            Serial.println("Communication with WiFi module failed!");
-            /* don't continue if no network */
-            while (true) ;
-        }
-
-        fv = WiFi.firmwareVersion();
-        if (fv < WIFI_FIRMWARE_LATEST_VERSION) {
-            Serial.println("Please upgrade the firmware");
-        }
-    #endif
-
-    Serial.print(F("Connecting to WiFi "));
-    Serial.print(ssid);
-    status = WiFi.begin(ssid, password);
-    while (status != WL_CONNECTED) {
-        delay(1000);
-        Serial.print(F("."));
-        Serial.print(status);
-        status = WiFi.status();
-    }
-
-    Serial.println(F(" Connected!"));
-#else
-    /* Newer Ethernet shields have a
-     * MAC address printed on a sticker on the shield */
-    byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
-    IPAddress ip(192, 168, 1, 42);
-    IPAddress myDns(192, 168, 1, 1);
-    Ethernet.init(10); /* Most Arduino shields */
-    /* Ethernet.init(5);   * MKR ETH Shield */
-    /* Ethernet.init(0);   * Teensy 2.0 */
-    /* Ethernet.init(20);  * Teensy++ 2.0 */
-    /* Ethernet.init(15);  * ESP8266 with Adafruit FeatherWing Ethernet */
-    /* Ethernet.init(33);  * ESP32 with Adafruit FeatherWing Ethernet */
-    Serial.println(F("Initialize Ethernet with DHCP:"));
-    if (Ethernet.begin(mac) == 0) {
-        Serial.println(F("Failed to configure Ethernet using DHCP"));
-        /* Check for Ethernet hardware present */
-        if (Ethernet.hardwareStatus() == EthernetNoHardware) {
-            Serial.println(F("Ethernet shield was not found."));
-            while (true) {
-                delay(1); /* do nothing */
-            }
-        }
-        if (Ethernet.linkStatus() == LinkOFF) {
-            Serial.println(F("Ethernet cable is not connected."));
-        }
-        /* try to configure using IP address instead of DHCP : */
-        Ethernet.begin(mac, ip, myDns);
-    }
-    else {
-        Serial.print(F("  DHCP assigned IP "));
-        Serial.println(Ethernet.localIP());
-    }
-    /* We'll assume the Ethernet connection is ready to go. */
-#endif
-
-    Serial.println(F("********************************************************"));
-    Serial.print(F("      wolfSSL Example Client IP = "));
-#if defined(USING_WIFI)
-    Serial.println(WiFi.localIP());
-#else
-    Serial.println(Ethernet.localIP());
-#endif
-    Serial.print(F("   Configured Server Host to connect to: "));
-    Serial.println(host);
-    Serial.println(F("********************************************************"));
-    Serial.println(F("Setup network complete."));
-
-    return ret;
-}
-
-/*****************************************************************************/
-/* Arduino setup_wolfssl()                                                   */
-/*****************************************************************************/
-int setup_wolfssl(void) {
-    int ret = 0;
-    WOLFSSL_METHOD* method;
-
-    /* Show a revision of wolfssl user_settings.h file in use when available: */
-#if defined(WOLFSSL_USER_SETTINGS_ID)
-    Serial.print(F("WOLFSSL_USER_SETTINGS_ID: "));
-    Serial.println(F(WOLFSSL_USER_SETTINGS_ID));
-#else
-    Serial.println(F("No WOLFSSL_USER_SETTINGS_ID found."));
-#endif
-
-#if defined(NO_WOLFSSL_SERVER)
-    Serial.println(F("wolfSSL server code disabled to save space."));
-#endif
-#if defined(NO_WOLFSSL_CLIENT)
-    Serial.println(F("wolfSSL client code disabled to save space."));
-#endif
-
-#if defined(DEBUG_WOLFSSL)
-    wolfSSL_Debugging_ON();
-    Serial.println(F("wolfSSL Debugging is On!"));
-#else
-    Serial.println(F("wolfSSL Debugging is Off! (enable with DEBUG_WOLFSSL)"));
-#endif
-
-    /* See ssl.c for TLS cache settings. Larger cache = use more RAM. */
-#if defined(NO_SESSION_CACHE)
-    Serial.println(F("wolfSSL TLS NO_SESSION_CACHE"));
-#elif defined(MICRO_SESSION_CACHEx)
-    Serial.println(F("wolfSSL TLS MICRO_SESSION_CACHE"));
-#elif defined(SMALL_SESSION_CACHE)
-    Serial.println(F("wolfSSL TLS SMALL_SESSION_CACHE"));
-#elif defined(MEDIUM_SESSION_CACHE)
-    Serial.println(F("wolfSSL TLS MEDIUM_SESSION_CACHE"));
-#elif defined(BIG_SESSION_CACHE)
-    Serial.println(F("wolfSSL TLS BIG_SESSION_CACHE"));
-#elif defined(HUGE_SESSION_CACHE)
-    Serial.println(F("wolfSSL TLS HUGE_SESSION_CACHE"));
-#elif defined(HUGE_SESSION_CACHE)
-    Serial.println(F("wolfSSL TLS HUGE_SESSION_CACHE"));
-#else
-    Serial.println(F("WARNING: Unknown or no TLS session cache setting."));
-    /* See wolfssl/src/ssl.c for amount of memory used.
-     * It is best on embedded devices to choose a TLS session cache size. */
-#endif
-
-    ret = wolfSSL_Init();
-    if (ret == WOLFSSL_SUCCESS) {
-        Serial.println("Successfully called wolfSSL_Init");
-    }
-    else {
-        Serial.println("ERROR: wolfSSL_Init failed");
-    }
-
-    /* See companion server example with wolfSSLv23_server_method here.
-     * method = wolfSSLv23_client_method());   SSL 3.0 - TLS 1.3.
-     * method = wolfTLSv1_2_client_method();   only TLS 1.2
-     * method = wolfTLSv1_3_client_method();   only TLS 1.3
-     *
-     * see Arduino\libraries\wolfssl\src\user_settings.h */
-
-    Serial.println("Here we go!");
-
-    method = wolfSSLv23_client_method();
-    if (method == NULL) {
-        Serial.println(F("unable to get wolfssl client method"));
-        fail_wait();
-    }
-    ctx = wolfSSL_CTX_new(method);
-    if (ctx == NULL) {
-        Serial.println(F("unable to get ctx"));
-        fail_wait();
-    }
-
-    return ret;
-}
-
-/*****************************************************************************/
-/* Arduino setup_certificates()                                              */
-/*****************************************************************************/
-int setup_certificates(void) {
-    int ret = 0;
-
-    Serial.println(F("Initializing certificates..."));
-    show_memory();
-
-    /* Use built-in validation, No verification callback function: */
-    wolfSSL_CTX_set_verify(ctx, SSL_VERIFY_PEER, 0);
-
-    /* Certificate */
-    Serial.println("Initializing certificates...");
-    ret = wolfSSL_CTX_use_certificate_buffer(ctx,
-                                             CTX_CLIENT_CERT,
-                                             CTX_CLIENT_CERT_SIZE,
-                                             CTX_CLIENT_CERT_TYPE);
-    if (ret == WOLFSSL_SUCCESS) {
-        Serial.print("Success: use certificate: ");
-        Serial.println(xstr(CTX_SERVER_CERT));
-    }
-    else {
-        Serial.println(F("Error: wolfSSL_CTX_use_certificate_buffer failed: "));
-        wc_ErrorString(ret, wc_error_message);
-        Serial.println(wc_error_message);
-        fail_wait();
-    }
-
-    /* Setup private client key */
-    ret = wolfSSL_CTX_use_PrivateKey_buffer(ctx,
-                                            CTX_CLIENT_KEY,
-                                            CTX_CLIENT_KEY_SIZE,
-                                            CTX_CLIENT_KEY_TYPE);
-    if (ret == WOLFSSL_SUCCESS) {
-        Serial.print("Success: use private key buffer: ");
-        Serial.println(xstr(CTX_SERVER_KEY));
-    }
-    else {
-        Serial.println(F("Error: wolfSSL_CTX_use_PrivateKey_buffer failed: "));
-        wc_ErrorString(ret, wc_error_message);
-        Serial.println(wc_error_message);
-        fail_wait();
-    }
-
-    ret = wolfSSL_CTX_load_verify_buffer(ctx,
-                                         CTX_CA_CERT,
-                                         CTX_CA_CERT_SIZE,
-                                         CTX_CA_CERT_TYPE);
-    if (ret == WOLFSSL_SUCCESS) {
-        Serial.println(F("Success: load_verify CTX_CA_CERT"));
-    }
-    else {
-        Serial.println(F("Error: wolfSSL_CTX_load_verify_buffer failed: "));
-        wc_ErrorString(ret, wc_error_message);
-        Serial.println(wc_error_message);
-        fail_wait();
-    }
-
-
-
-    return ret;
-} /* Arduino setup */
-
-/*****************************************************************************/
-/*****************************************************************************/
-/* Arduino setup()                                                           */
-/*****************************************************************************/
-/*****************************************************************************/
-void setup(void) {
-    int i = 0;
-    Serial.begin(SERIAL_BAUD);
-    while (!Serial && (i < 10)) {
-        /* wait for serial port to connect. Needed for native USB port only */
-        delay(1000);
-        i++;
-    }
-    Serial.println(F(""));
-    Serial.println(F(""));
-    Serial.println(F("wolfSSL TLS Client Example Startup."));
-
-    /* define DEBUG_WOLFSSL in wolfSSL user_settings.h for diagnostics */
-#if defined(DEBUG_WOLFSSL)
-    wolfSSL_Debugging_ON();
-#endif
-
-    /* Optionally pre-allocate a large block of memory for testing */
-#if defined(MEMORY_STRESS_TEST)
-    Serial.println(F("WARNING: Memory Stress Test Active!"));
-    Serial.print(F("Allocating extra memory: "));
-    Serial.print(MEMORY_STRESS_INITIAL);
-    Serial.println(F(" bytes..."));
-    memory_stress[mem_ctr] = (char*)malloc(MEMORY_STRESS_INITIAL);
-    show_memory();
-#endif
-
-    setup_hardware();
-
-    setup_network();
-
-    setup_datetime();
-
-    setup_wolfssl();
-
-    setup_certificates();
-
-    /* Initialize wolfSSL using callback functions. */
-    wolfSSL_SetIOSend(ctx, EthernetSend);
-    wolfSSL_SetIORecv(ctx, EthernetReceive);
-
-    Serial.println(F("Completed Arduino setup!"));
-    /* See companion wolfssl_server.ino code; server begins listening here
-     * https://github.com/wolfSSL/wolfssl/tree/master/IDE/ARDUINO/sketches/wolfssl_server
-     * Any other server will work. See also:
-     * https://github.com/wolfSSL/wolfssl/tree/master/examples/client
-     */
-    /* See companion wolfssl_server.ino code */
-    return;
-} /* Arduino setup */
-
-/*****************************************************************************/
-/* wolfSSL error_check()                                                     */
-/*****************************************************************************/
-int error_check(int this_ret, bool halt_on_error,
-                      const __FlashStringHelper* message) {
-    int ret = 0;
-    if (this_ret == WOLFSSL_SUCCESS) {
-        Serial.print(F("Success: "));
-        Serial.println(message);
-    }
-    else {
-        Serial.print(F("ERROR: return = "));
-        Serial.print(this_ret);
-        Serial.print(F(": "));
-        Serial.println(message);
-        Serial.println(wc_GetErrorString(this_ret));
-        if (halt_on_error) {
-            fail_wait();
-        }
-    }
-    show_memory();
-
-    return ret;
-} /* error_check */
-
-/*****************************************************************************/
-/* wolfSSL error_check_ssl                                                   */
-/*   Parameters:                                                             */
-/*     ssl           is the current WOLFSSL object pointer                   */
-/*     halt_on_error set to true to suspend operations for critical error    */
-/*     message       is expected to be a memory-efficient F("") macro string */
-/*****************************************************************************/
-int error_check_ssl(WOLFSSL* ssl, int this_ret, bool halt_on_error,
-                           const __FlashStringHelper* message) {
-    int err = 0;
-
-    if (ssl == NULL) {
-        Serial.println(F("ssl is Null; Unable to allocate SSL object?"));
-#ifndef DEBUG_WOLFSSL
-        Serial.println(F("Define DEBUG_WOLFSSL in user_settings.h for more."));
-#else
-        Serial.println(F("See wolfssl/wolfcrypt/error-crypt.h for codes."));
-#endif
-        Serial.print(F("ERROR: "));
-        Serial.println(message);
-        show_memory();
-        if (halt_on_error) {
-            fail_wait();
-        }
-    }
-    else {
-        err = wolfSSL_get_error(ssl, this_ret);
-        if (err == WOLFSSL_SUCCESS) {
-            Serial.print(F("Success m: "));
-            Serial.println(message);
-        }
-        else {
-            if (err < 0) {
-                wolfSSL_ERR_error_string(err, errBuf);
-                Serial.print(F("WOLFSSL Error: "));
-                Serial.print(err);
-                Serial.print(F("; "));
-                Serial.println(errBuf);
-            }
-            else {
-                Serial.println(F("Success: ssl object."));
-            }
-        }
-    }
-
-    return err;
-}
-
-/*****************************************************************************/
-/*****************************************************************************/
-/* Arduino loop()                                                            */
-/*****************************************************************************/
-/*****************************************************************************/
-void loop() {
-    char reply[80];
-    char msg[32]       = "hello wolfssl!";
-    const char* cipherName;
-    int retry_shutdown = SHUTDOWN_DELAY_MS; /* max try, once per millisecond */
-    int total_input    = 0;
-    int msgSz          = 0;
-    int input          = 0;
-    int ret            = 0;
-    int err            = 0;
-    msgSz = (int)strlen(msg);
-    Serial.println(F(""));
-    Serial.println(F("Starting Arduino loop() ..."));
-
-    if (reconnect) {
-        reconnect--;
-        /* WiFi client returns true if connection succeeds, false if not.  */
-        /* Wired client returns int (1,-1,-2,-3,-4) for connection status. */
-        Serial.print(F("Connecting to "));
-        Serial.print(host);
-        Serial.print(F(":"));
-        Serial.println(port);
-        /* can also use: IPAddress server(192,168,1,37); */
-        Serial.println(F("Here we go..."));
-        ret = client.connect(host, port);
-        Serial.println(F("Ok, checking..."));
-        if (ret > 0) {
-            Serial.println(F("Connected!"));
-
-            /* initialize wolfSSL */
-            ret = wolfSSL_Init();
-            error_check(ret, false, F("calling wolfSSL_Init") );
-
-            /* create secure connection object. see setup for ctx certs. */
-            Serial.println(F("Calling ssl = wolfSSL_new(ctx)"));
-            ssl = wolfSSL_new(ctx);
-            error_check_ssl(ssl, 0, true, F("Create WOLFSSL object from ctx"));
-
-            Serial.print(F("Connecting to wolfSSL TLS Secure Server..."));
-            do {
-                err = 0; /* reset error */
-                Serial.println(F("wolfSSL_connect ..."));
-                ret = wolfSSL_connect(ssl);
-                Serial.print("wolfSSL_connect return result =");
-                Serial.println(ret);
-                if ((ret != WOLFSSL_SUCCESS) && (ret != WC_PENDING_E)) {
-                    Serial.println(F("Failed connection, checking error."));
-                    err = error_check_ssl(ssl, ret, true,
-                                    F("Create WOLFSSL object from ctx"));
-                    Serial.print("err =");
-                    Serial.println(err);
-                }
-                else {
-                   Serial.print(PROGRESS_DOT);
-                }
-            } while (err == WC_PENDING_E);
-
-            Serial.println();
-            Serial.println(F("Connected!"));
-            Serial.print(F("SSL version is "));
-            Serial.println(wolfSSL_get_version(ssl));
-
-            cipherName = wolfSSL_get_cipher(ssl);
-            Serial.print(F("SSL cipher suite is "));
-            Serial.println(cipherName);
-
-            /* see test.h
-             * TODO: test.h needs a little bit of Arduino work for these:
-            showPeerEx(ssl, lng_index);
-            showPeerPEM(ssl);
-            */
-
-            Serial.print(F("Sending secure message to server: "));
-            Serial.println(msg);
-            ret = wolfSSL_write(ssl, msg, msgSz);
-            if (ret == msgSz) {
-                Serial.print(F("Waiting for Server response..."));
-
-                while (!client.available()) {
-                    /* wait for data */
-                    delay(1); /* 1 ms delay */
-                }
-
-                Serial.print(F("Reading response.."));
-                /* read data */
-                do {
-                    ret = wolfSSL_read(ssl, reply, sizeof(reply) - 1);
-                    if (ret < 0) {
-                        error_check_ssl(ssl, ret, false,
-                                        F("during TLS Read"));
-                    }
-                    else {
-                        Serial.print(PROGRESS_DOT);
-                    }
-                } while (err == WC_PENDING_E);
-                Serial.println();
-
-                Serial.println();
-                Serial.println(reply); /* typically: I hear you fa shizzle! */
-                Serial.println();
-
-            } /* wolfSSL_write message size matched */
-            else {
-                error_check_ssl(ssl, ret, false,
-                    F("during TLS Write"));
-            }  /* any wolfSSL_write message size mismatch is an error */
-
-            Serial.print(F("Shutting down.."));
-            do {
-                delay(1);
-                Serial.print(PROGRESS_DOT);
-                retry_shutdown--;
-                ret = wolfSSL_shutdown(ssl);
-            } while (   (ret == WOLFSSL_SHUTDOWN_NOT_DONE)
-                     && (retry_shutdown > 0)
-                    ); /* There may be pending data, so wait until done. */
-            Serial.println();
-
-            if (retry_shutdown <= 0) {
-                /* if wolfSSL_free is called before properly shutting down the
-                 * ssl object, undesired results may occur. */
-                Serial.println(F("Warning! Shutdown did not properly complete."));
-            }
-
-            wolfSSL_free(ssl);
-            client.stop();
-            Serial.println(F("Connection complete."));
-            if (REPEAT_CONNECTION) {
-                reconnect = RECONNECT_ATTEMPTS;
-            }
-            else {
-                reconnect = 0;
-            }
-        } /* client.connect(host, port) */
-        else {
-            Serial.println(F("Problem sending message. Trying to reconnect..."));
-        }
-    }
-    delay(1000);
-    if ((reconnect > 0) && (REPEAT_CONNECTION)) {
-        Serial.println(F("Arduino loop repeating..."));
-        Serial.println();
-    }
-    else {
-        printf("wow");
-        Serial.println(F("Done!"));
-        while(1) {
-            /* wait forever */
-        }
-    }
-
-#if defined(MEMORY_STRESS_TEST)
-    if (mem_ctr < MEMORY_STRESS_ITERATIONS) {
-        /* reminder: mem_ctr == 0 is MEMORY_STRESS_INITIAL allocation */
-        mem_ctr++;
-        Serial.print(F("Memory stress increment: "));
-        Serial.print(mem_ctr);
-        Serial.print(F(". Allocating addition memory (bytes): "));
-        Serial.println(MEMORY_STRESS_BLOCK_SIZE);
-        memory_stress[mem_ctr] = (char*)malloc(MEMORY_STRESS_BLOCK_SIZE);
-        show_memory();
-    }
-#endif
-} /* Arduino loop repeats */

IDE/ARDUINO/sketches/wolfssl_server/README.md

@@ -1,6 +1,14 @@
 # Arduino Basic TLS Server
 
-Open the [wolfssl_server.ino](./wolfssl_server.ino) file in the Arduino IDE.
+Open the `wolfssl_server.ino` file in the Arduino IDE.
+
+NOTE: Moving; See https://github.com/wolfSSL/wolfssl-examples/pull/499
+
+If using WiFi, be sure to set `ssid` and `password` values.
+
+May need "Ethernet by Various" library to be installed. Tested with v2.0.2 and v2.8.1.
+
+See the `#define WOLFSSL_TLS_SERVER_HOST` to set your own server address.
 
 Other IDE products are also supported, such as:
 
@@ -13,7 +21,7 @@ Additional examples can be found on [wolfSSL/wolfssl-examples](https://github.co
 
 ## Connect with an Arduino Sketch
 
-See the companion [Arduino Sketch Client](../wolfssl_client/wolfssl_client.ino). 
+See the companion [Arduino Sketch Client](../wolfssl_client/wolfssl_client.ino).
 
 ## Connect with Linux Client
 
@@ -35,7 +43,7 @@ press the reset button or power cycle the Arduino before making a connection.
 Here's one possible script to test the server from a command-line client:
 
 ```bash
-#!/bin/bash
+#!/usr/bin/env bash
 echo "client log " > client_log.txt
 counter=1
 THIS_ERR=0

IDE/ARDUINO/sketches/wolfssl_server/wolfssl_server.ino

@@ -1,838 +0,0 @@
-/* wolfssl_server.ino
- *
- * Copyright (C) 2006-2023 wolfSSL Inc.
- *
- * This file is part of wolfSSL.
- *
- * wolfSSL is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * wolfSSL is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
- */
-
-/*
-Tested with:
-
-1) Intel Galileo acting as the Client, with a laptop acting as a server using
-   the server example provided in examples/server.
-   Legacy Arduino v1.86 was used to compile and program the Galileo
-
-2) Espressif ESP32 WiFi
-
-3) Arduino Due, Nano33 IoT, Nano RP-2040
-*/
-
-/*
- * Note to code editors: the Arduino client and server examples are edited in
- * parallel for side-by-side comparison between examples.
- */
-
-/* If you have a private include, define it here, otherwise edit WiFi params */
-#define MY_PRIVATE_CONFIG "/workspace/my_private_config.h"
-
-/* set REPEAT_CONNECTION to a non-zero value to continually run the example. */
-#define REPEAT_CONNECTION 1
-
-/* Edit this with your other TLS host server address to connect to: */
-/* #define WOLFSSL_TLS_SERVER_HOST "192.168.1.34" */
-
-/* wolfssl TLS examples communicate on port 11111 */
-#define WOLFSSL_PORT 11111
-
-/* Choose a monitor serial baud rate: 9600, 14400, 19200, 57600, 74880, etc. */
-#define SERIAL_BAUD 115200
-
-/* We'll wait up to 2000 milliseconds to properly shut down connection */
-#define SHUTDOWN_DELAY_MS 2000
-
-/* Number of times to retry connection.  */
-#define RECONNECT_ATTEMPTS 20
-
-/* Optional stress test. Define to consume memory until exhausted: */
-/* #define MEMORY_STRESS_TEST */
-
-/* Choose client or server example, not both. */
-/* #define WOLFSSL_CLIENT_EXAMPLE */
-#define WOLFSSL_SERVER_EXAMPLE
-
-#if defined(MY_PRIVATE_CONFIG)
-    /* the /workspace directory may contain a private config
-     * excluded from GitHub with items such as WiFi passwords */
-    #include MY_PRIVATE_CONFIG
-    static const char* ssid PROGMEM = MY_ARDUINO_WIFI_SSID;
-    static const char* password PROGMEM = MY_ARDUINO_WIFI_PASSWORD;
-#else
-    /* when using WiFi capable boards: */
-    static const char* ssid PROGMEM  = "your_SSID";
-    static const char* password PROGMEM = "your_PASSWORD";
-#endif
-
-#define BROADCAST_ADDRESS "255.255.255.255"
-
-/* There's an optional 3rd party NTPClient library by Fabrice Weinberg.
- * If it is installed, uncomment define USE_NTP_LIB here: */
-/* #define USE_NTP_LIB */
-#ifdef USE_NTP_LIB
-    #include <NTPClient.h>
-#endif
-
-#include <wolfssl.h>
-/* Important: make sure settings.h appears before any other wolfSSL headers */
-#include <wolfssl/wolfcrypt/settings.h>
-/* Reminder: settings.h includes user_settings.h
- * For ALL project wolfSSL settings, see:
- * [your path]/Arduino\libraries\wolfSSL\src\user_settings.h   */
-#include <wolfssl/ssl.h>
-#include <wolfssl/certs_test.h>
-#include <wolfssl/wolfcrypt/error-crypt.h>
-
-/* Define DEBUG_WOLFSSL in user_settings.h for more verbose logging. */
-#if defined(DEBUG_WOLFSSL)
-    #define PROGRESS_DOT F("")
-#else
-    #define PROGRESS_DOT F(".")
-#endif
-
-/* Convert a macro to a string */
-#define xstr(x) str(x)
-#define str(x) #x
-
-/* optional board-specific networking includes */
-#if defined(ESP32)
-    #define USING_WIFI
-    #include <WiFi.h>
-    #include <WiFiUdp.h>
-    #ifdef USE_NTP_LIB
-        WiFiUDP ntpUDP;
-    #endif
-    /* Ensure the F() flash macro is defined */
-    #ifndef F
-        #define F
-    #endif
-    WiFiClient client;
-    WiFiServer server(WOLFSSL_PORT);
-#elif defined(ESP8266)
-    #define USING_WIFI
-    #include <ESP8266WiFi.h>
-    WiFiClient client;
-    WiFiServer server(WOLFSSL_PORT);
-#elif defined(ARDUINO_SAM_DUE)
-    #include <SPI.h>
-    /* There's no WiFi/Ethernet on the Due. Requires Ethernet Shield.
-    /* Needs "Ethernet by Various" library to be installed. Tested with V2.0.2 */
-    #include <Ethernet.h>
-    EthernetClient client;
-    EthernetClient server(WOLFSSL_PORT);
-#elif defined(ARDUINO_SAMD_NANO_33_IOT)
-    #define USING_WIFI
-    #include <SPI.h>
-    #include <WiFiNINA.h> /* Needs Arduino WiFiNINA library installed manually */
-    WiFiClient client;
-    WiFiServer server(WOLFSSL_PORT);
-#elif defined(ARDUINO_ARCH_RP2040)
-    #define USING_WIFI
-    #include <SPI.h>
-    #include <WiFiNINA.h>
-    WiFiClient client;
-    WiFiServer server(WOLFSSL_PORT);
-#elif defined(USING_WIFI)
-    #define USING_WIFI
-    #include <WiFi.h>
-    #include <WiFiUdp.h>
-    #ifdef USE_NTP_LIB
-        WiFiUDP ntpUDP;
-    #endif
-    WiFiClient client;
-    WiFiServer server(WOLFSSL_PORT);
-/* TODO
-#elif defined(OTHER_BOARD)
-*/
-#else
-    #define USING_WIFI
-    WiFiClient client;
-    WiFiServer server(WOLFSSL_PORT);
-#endif
-
-/* Only for syntax highlighters to show interesting options enabled: */
-#if defined(HAVE_SNI)                           \
-   || defined(HAVE_MAX_FRAGMENT)                  \
-   || defined(HAVE_TRUSTED_CA)                    \
-   || defined(HAVE_TRUNCATED_HMAC)                \
-   || defined(HAVE_CERTIFICATE_STATUS_REQUEST)    \
-   || defined(HAVE_CERTIFICATE_STATUS_REQUEST_V2) \
-   || defined(HAVE_SUPPORTED_CURVES)              \
-   || defined(HAVE_ALPN)                          \
-   || defined(HAVE_SESSION_TICKET)                \
-   || defined(HAVE_SECURE_RENEGOTIATION)          \
-   || defined(HAVE_SERVER_RENEGOTIATION_INFO)
-#endif
-
-
-/* we expect our IP address from DHCP */
-
-static WOLFSSL_CTX* ctx = NULL;
-static WOLFSSL* ssl = NULL;
-static char* wc_error_message = (char*)malloc(80 + 1);
-static char errBuf[80];
-
-#if defined(MEMORY_STRESS_TEST)
-    #define MEMORY_STRESS_ITERATIONS 100
-    #define MEMORY_STRESS_BLOCK_SIZE 1024
-    #define MEMORY_STRESS_INITIAL (4*1024)
-    static char* memory_stress[MEMORY_STRESS_ITERATIONS]; /* typically 1K per item */
-    static int mem_ctr        = 0;
-#endif
-
-static int EthernetSend(WOLFSSL* ssl, char* msg, int sz, void* ctx);
-static int EthernetReceive(WOLFSSL* ssl, char* reply, int sz, void* ctx);
-static int reconnect = RECONNECT_ATTEMPTS;
-static int lng_index PROGMEM = 0; /* 0 = English */
-
-#if defined(__arm__)
-    #include <malloc.h>
-    extern char _end;
-    extern "C" char *sbrk(int i);
-    static char *ramstart=(char *)0x20070000;
-    static char *ramend=(char *)0x20088000;
-#endif
-
-/*****************************************************************************/
-/* fail_wait - in case of unrecoverable error                                */
-/*****************************************************************************/
-int fail_wait(void) {
-    show_memory();
-
-    Serial.println(F("Failed. Halt."));
-    while (1) {
-        delay(1000);
-    }
-    return 0;
-}
-
-/*****************************************************************************/
-/* show_memory() to optionally view during debugging.                         */
-/*****************************************************************************/
-int show_memory(void)
-{
-#if defined(__arm__)
-    struct mallinfo mi = mallinfo();
-
-    char *heapend=sbrk(0);
-    register char * stack_ptr asm("sp");
-    #if defined(DEBUG_WOLFSSL_VERBOSE)
-        Serial.print("    arena=");
-        Serial.println(mi.arena);
-        Serial.print("  ordblks=");
-        Serial.println(mi.ordblks);
-        Serial.print(" uordblks=");
-        Serial.println(mi.uordblks);
-        Serial.print(" fordblks=");
-        Serial.println(mi.fordblks);
-        Serial.print(" keepcost=");
-        Serial.println(mi.keepcost);
-    #endif
-
-    #if defined(DEBUG_WOLFSSL) || defined(MEMORY_STRESS_TEST)
-        Serial.print("Estimated free memory: ");
-        Serial.print(stack_ptr - heapend + mi.fordblks);
-        Serial.println(F(" bytes"));
-    #endif
-
-    #if (0)
-        /* Experimental: not supported on all devices: */
-        Serial.print("RAM Start %lx\n", (unsigned long)ramstart);
-        Serial.print("Data/Bss end %lx\n", (unsigned long)&_end);
-        Serial.print("Heap End %lx\n", (unsigned long)heapend);
-        Serial.print("Stack Ptr %lx\n",(unsigned long)stack_ptr);
-        Serial.print("RAM End %lx\n", (unsigned long)ramend);
-
-        Serial.print("Heap RAM Used: ",mi.uordblks);
-        Serial.print("Program RAM Used ",&_end - ramstart);
-        Serial.print("Stack RAM Used ",ramend - stack_ptr);
-
-        Serial.print("Estimated Free RAM: %d\n\n",stack_ptr - heapend + mi.fordblks);
-    #endif
-#else
-    Serial.println(F("show_memory() not implemented for this platform"));
-#endif
-    return 0;
-}
-
-/*****************************************************************************/
-/* EthernetSend() to send a message string.                                  */
-/*****************************************************************************/
-int EthernetSend(WOLFSSL* ssl, char* message, int sz, void* ctx) {
-    int sent = 0;
-    (void)ssl;
-    (void)ctx;
-
-    sent = client.write((byte*)message, sz);
-    return sent;
-}
-
-/*****************************************************************************/
-/* EthernetReceive() to receive a reply string.                              */
-/*****************************************************************************/
-int EthernetReceive(WOLFSSL* ssl, char* reply, int sz, void* ctx) {
-    int ret = 0;
-    (void)ssl;
-    (void)ctx;
-
-    while (client.available() > 0 && ret < sz) {
-        reply[ret++] = client.read();
-    }
-    return ret;
-}
-
-/*****************************************************************************/
-/* Arduino setup_hardware()                                                  */
-/*****************************************************************************/
-int setup_hardware(void) {
-    int ret = 0;
-
-#if defined(ARDUINO_SAMD_NANO_33_IOT)
-    Serial.println(F("Detected known tested and working Arduino Nano 33 IoT"));
-#elif defined(ARDUINO_ARCH_RP2040)
-    Serial.println(F("Detected known tested and working Arduino RP-2040"));
-#elif defined(__arm__) && defined(ID_TRNG) && defined(TRNG)
-    /* need to manually turn on random number generator on Arduino Due, etc. */
-    pmc_enable_periph_clk(ID_TRNG);
-    trng_enable(TRNG);
-    Serial.println(F("Enabled ARM TRNG"));
-#endif
-
-    show_memory();
-    randomSeed(analogRead(0));
-    return ret;
-}
-
-/*****************************************************************************/
-/* Arduino setup_datetime()                                                  */
-/*   The device needs to have a valid date within the valid range of certs.  */
-/*****************************************************************************/
-int setup_datetime(void) {
-    int ret = 0;
-    int ntp_tries = 20;
-
-    /* we need a date in the range of cert expiration */
-#ifdef USE_NTP_LIB
-    #if defined(ESP32)
-        NTPClient timeClient(ntpUDP, "pool.ntp.org");
-
-        timeClient.begin();
-        timeClient.update();
-        delay(1000);
-        while (!timeClient.isTimeSet() && (ntp_tries > 0)) {
-            timeClient.forceUpdate();
-            Serial.println(F("Waiting for NTP update"));
-            delay(2000);
-            ntp_tries--;
-        }
-        if (ntp_tries <= 0) {
-            Serial.println(F("Warning: gave up waiting on NTP"));
-        }
-        Serial.println(timeClient.getFormattedTime());
-        Serial.println(timeClient.getEpochTime());
-    #endif
-#endif
-
-#if defined(ESP32)
-    /* see esp32-hal-time.c */
-    ntp_tries = 5;
-    /* Replace "pool.ntp.org" with your preferred NTP server */
-    configTime(0, 0, "pool.ntp.org");
-
-    /* Wait for time to be set */
-    while ((time(nullptr) <= 100000) && ntp_tries > 0) {
-        Serial.println(F("Waiting for time to be set..."));
-        delay(2000);
-        ntp_tries--;
-    }
-#endif
-
-    return ret;
-} /* setup_datetime */
-
-/*****************************************************************************/
-/* Arduino setup_network()                                                   */
-/*****************************************************************************/
-int setup_network(void) {
-    int ret = 0;
-
-#if defined(USING_WIFI)
-    int status = WL_IDLE_STATUS;
-
-    /* The ESP8266 & ESP32 support both AP and STA. We'll use STA: */
-    #if defined(ESP8266) || defined(ESP32)
-        WiFi.mode(WIFI_STA);
-    #else
-        String fv;
-        if (WiFi.status() == WL_NO_MODULE) {
-            Serial.println("Communication with WiFi module failed!");
-            /* don't continue if no network */
-            while (true) ;
-        }
-
-        fv = WiFi.firmwareVersion();
-        if (fv < WIFI_FIRMWARE_LATEST_VERSION) {
-            Serial.println("Please upgrade the firmware");
-        }
-    #endif
-
-    Serial.print(F("Connecting to WiFi "));
-    Serial.print(ssid);
-    status = WiFi.begin(ssid, password);
-    while (status != WL_CONNECTED) {
-        delay(1000);
-        Serial.print(F("."));
-        Serial.print(status);
-        status = WiFi.status();
-    }
-
-    Serial.println(F(" Connected!"));
-#else
-    /* Newer Ethernet shields have a
-     * MAC address printed on a sticker on the shield */
-    byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
-    IPAddress ip(192, 168, 1, 42);
-    IPAddress myDns(192, 168, 1, 1);
-    Ethernet.init(10); /* Most Arduino shields */
-    /* Ethernet.init(5);   * MKR ETH Shield */
-    /* Ethernet.init(0);   * Teensy 2.0 */
-    /* Ethernet.init(20);  * Teensy++ 2.0 */
-    /* Ethernet.init(15);  * ESP8266 with Adafruit FeatherWing Ethernet */
-    /* Ethernet.init(33);  * ESP32 with Adafruit FeatherWing Ethernet */
-    Serial.println(F("Initialize Ethernet with DHCP:"));
-    if (Ethernet.begin(mac) == 0) {
-        Serial.println(F("Failed to configure Ethernet using DHCP"));
-        /* Check for Ethernet hardware present */
-        if (Ethernet.hardwareStatus() == EthernetNoHardware) {
-            Serial.println(F("Ethernet shield was not found."));
-            while (true) {
-                delay(1); /* do nothing */
-            }
-        }
-        if (Ethernet.linkStatus() == LinkOFF) {
-            Serial.println(F("Ethernet cable is not connected."));
-        }
-        /* try to configure using IP address instead of DHCP : */
-        Ethernet.begin(mac, ip, myDns);
-    }
-    else {
-        Serial.print(F("  DHCP assigned IP "));
-        Serial.println(Ethernet.localIP());
-    }
-    /* We'll assume the Ethernet connection is ready to go. */
-#endif
-
-    Serial.println(F("********************************************************"));
-    Serial.print(F("      wolfSSL Example Server IP = "));
-#if defined(USING_WIFI)
-    Serial.println(WiFi.localIP());
-#else
-    Serial.println(Ethernet.localIP());
-#endif
-    /* In server mode, there's no host definition. */
-    /* See companion example: wolfssl_client.ino */
-    Serial.println(F("********************************************************"));
-    Serial.println(F("Setup network complete."));
-
-    return ret;
-}
-
-/*****************************************************************************/
-/* Arduino setup_wolfssl()                                                   */
-/*****************************************************************************/
-int setup_wolfssl(void) {
-    int ret = 0;
-    WOLFSSL_METHOD* method;
-
-    /* Show a revision of wolfssl user_settings.h file in use when available: */
-#if defined(WOLFSSL_USER_SETTINGS_ID)
-    Serial.print(F("WOLFSSL_USER_SETTINGS_ID: "));
-    Serial.println(F(WOLFSSL_USER_SETTINGS_ID));
-#else
-    Serial.println(F("No WOLFSSL_USER_SETTINGS_ID found."));
-#endif
-
-#if defined(NO_WOLFSSL_SERVER)
-    Serial.println(F("wolfSSL server code disabled to save space."));
-#endif
-#if defined(NO_WOLFSSL_CLIENT)
-    Serial.println(F("wolfSSL client code disabled to save space."));
-#endif
-
-#if defined(DEBUG_WOLFSSL)
-    wolfSSL_Debugging_ON();
-    Serial.println(F("wolfSSL Debugging is On!"));
-#else
-    Serial.println(F("wolfSSL Debugging is Off! (enable with DEBUG_WOLFSSL)"));
-#endif
-
-    /* See ssl.c for TLS cache settings. Larger cache = use more RAM. */
-#if defined(NO_SESSION_CACHE)
-    Serial.println(F("wolfSSL TLS NO_SESSION_CACHE"));
-#elif defined(MICRO_SESSION_CACHEx)
-    Serial.println(F("wolfSSL TLS MICRO_SESSION_CACHE"));
-#elif defined(SMALL_SESSION_CACHE)
-    Serial.println(F("wolfSSL TLS SMALL_SESSION_CACHE"));
-#elif defined(MEDIUM_SESSION_CACHE)
-    Serial.println(F("wolfSSL TLS MEDIUM_SESSION_CACHE"));
-#elif defined(BIG_SESSION_CACHE)
-    Serial.println(F("wolfSSL TLS BIG_SESSION_CACHE"));
-#elif defined(HUGE_SESSION_CACHE)
-    Serial.println(F("wolfSSL TLS HUGE_SESSION_CACHE"));
-#elif defined(HUGE_SESSION_CACHE)
-    Serial.println(F("wolfSSL TLS HUGE_SESSION_CACHE"));
-#else
-    Serial.println(F("WARNING: Unknown or no TLS session cache setting."));
-    /* See wolfssl/src/ssl.c for amount of memory used.
-     * It is best on embedded devices to choose a TLS session cache size. */
-#endif
-
-    ret = wolfSSL_Init();
-    if (ret == WOLFSSL_SUCCESS) {
-        Serial.println("Successfully called wolfSSL_Init");
-    }
-    else {
-        Serial.println("ERROR: wolfSSL_Init failed");
-    }
-
-    /* See companion server example with wolfSSLv23_server_method here.
-     * method = wolfSSLv23_client_method());   SSL 3.0 - TLS 1.3.
-     * method = wolfTLSv1_2_client_method();   only TLS 1.2
-     * method = wolfTLSv1_3_client_method();   only TLS 1.3
-     *
-     * see Arduino\libraries\wolfssl\src\user_settings.h */
-
-    Serial.println("Here we go!");
-
-    method = wolfSSLv23_server_method();
-    if (method == NULL) {
-        Serial.println(F("unable to get wolfssl server method"));
-        fail_wait();
-    }
-    ctx = wolfSSL_CTX_new(method);
-    if (ctx == NULL) {
-        Serial.println(F("unable to get ctx"));
-        fail_wait();
-    }
-
-    return ret;
-}
-
-/*****************************************************************************/
-/* Arduino setup_certificates()                                              */
-/*****************************************************************************/
-int setup_certificates(void) {
-    int ret = 0;
-
-    Serial.println(F("Initializing certificates..."));
-    show_memory();
-
-    /* Use built-in validation, No verification callback function: */
-    wolfSSL_CTX_set_verify(ctx, SSL_VERIFY_NONE, 0);
-
-    /* Certificate */
-    Serial.println("Initializing certificates...");
-    ret = wolfSSL_CTX_use_certificate_buffer(ctx,
-                                             CTX_SERVER_CERT,
-                                             CTX_SERVER_CERT_SIZE,
-                                             CTX_CA_CERT_TYPE);
-    if (ret == WOLFSSL_SUCCESS) {
-        Serial.print("Success: use certificate: ");
-        Serial.println(xstr(CTX_SERVER_CERT));
-    }
-    else {
-        Serial.print("Error: wolfSSL_CTX_use_certificate_buffer failed: ");
-        wc_ErrorString(ret, wc_error_message);
-        Serial.println(wc_error_message);
-        fail_wait();
-    }
-
-    /* Setup private server key */
-    ret = wolfSSL_CTX_use_PrivateKey_buffer(ctx,
-                                            CTX_SERVER_KEY,
-                                            CTX_SERVER_KEY_SIZE,
-                                            CTX_SERVER_KEY_TYPE);
-    if (ret == WOLFSSL_SUCCESS) {
-        Serial.print("Success: use private key buffer: ");
-        Serial.println(xstr(CTX_SERVER_KEY));
-    }
-    else {
-        Serial.print("Error: wolfSSL_CTX_use_PrivateKey_buffer failed: ");
-        wc_ErrorString(ret, wc_error_message);
-        Serial.println(wc_error_message);
-        fail_wait();
-    }
-
-    return ret;
-} /* Arduino setup */
-
-/*****************************************************************************/
-/*****************************************************************************/
-/* Arduino setup()                                                           */
-/*****************************************************************************/
-/*****************************************************************************/
-void setup(void) {
-    int i = 0;
-    Serial.begin(SERIAL_BAUD);
-    while (!Serial && (i < 10)) {
-        /* wait for serial port to connect. Needed for native USB port only */
-        delay(1000);
-        i++;
-    }
-
-    Serial.println(F(""));
-    Serial.println(F(""));
-    Serial.println(F("wolfSSL TLS Server Example Startup."));
-
-    /* define DEBUG_WOLFSSL in wolfSSL user_settings.h for diagnostics */
-#if defined(DEBUG_WOLFSSL)
-    wolfSSL_Debugging_ON();
-#endif
-
-    /* Optionally pre-allocate a large block of memory for testing */
-#if defined(MEMORY_STRESS_TEST)
-    Serial.println(F("WARNING: Memory Stress Test Active!"));
-    Serial.print(F("Allocating extra memory: "));
-    Serial.print(MEMORY_STRESS_INITIAL);
-    Serial.println(F(" bytes..."));
-    memory_stress[mem_ctr] = (char*)malloc(MEMORY_STRESS_INITIAL);
-    show_memory();
-#endif
-
-    setup_hardware();
-
-    setup_network();
-
-    setup_datetime();
-
-    setup_wolfssl();
-
-    setup_certificates();
-
-    /* Initialize wolfSSL using callback functions. */
-    wolfSSL_SetIOSend(ctx, EthernetSend);
-    wolfSSL_SetIORecv(ctx, EthernetReceive);
-
-#if defined THIS_USER_SETTINGS_VERSION
-    Serial.print(F("This user_settings.h version:"))
-    Serial.println(THIS_USER_SETTINGS_VERSION)
-#endif
-
-    /* Start the server
-     * See https://www.arduino.cc/reference/en/libraries/ethernet/server.begin/
-     */
-
-    Serial.println(F("Completed Arduino setup()"));
-
-    server.begin();
-    Serial.println("Begin Server... (waiting for remote client to connect)");
-
-    /* See companion wolfssl_client.ino code */
-    return;
-} /* Arduino setup */
-
-/*****************************************************************************/
-/* wolfSSL error_check()                                                     */
-/*****************************************************************************/
-int error_check(int this_ret, bool halt_on_error,
-                      const __FlashStringHelper* message) {
-    int ret = 0;
-    if (this_ret == WOLFSSL_SUCCESS) {
-        Serial.print(F("Success: "));
-        Serial.println(message);
-    }
-    else {
-        Serial.print(F("ERROR: return = "));
-        Serial.print(this_ret);
-        Serial.print(F(": "));
-        Serial.println(message);
-        Serial.println(wc_GetErrorString(this_ret));
-        if (halt_on_error) {
-            fail_wait();
-        }
-    }
-    show_memory();
-
-    return ret;
-} /* error_check */
-
-/*****************************************************************************/
-/* wolfSSL error_check_ssl                                                   */
-/*   Parameters:                                                             */
-/*     ssl           is the current WOLFSSL object pointer                   */
-/*     halt_on_error set to true to suspend operations for critical error    */
-/*     message       is expected to be a memory-efficient F("") macro string */
-/*****************************************************************************/
-int error_check_ssl(WOLFSSL* ssl, int this_ret, bool halt_on_error,
-                           const __FlashStringHelper* message) {
-    int err = 0;
-
-    if (ssl == NULL) {
-        Serial.println(F("ssl is Null; Unable to allocate SSL object?"));
-#ifndef DEBUG_WOLFSSL
-        Serial.println(F("Define DEBUG_WOLFSSL in user_settings.h for more."));
-#else
-        Serial.println(F("See wolfssl/wolfcrypt/error-crypt.h for codes."));
-#endif
-        Serial.print(F("ERROR: "));
-        Serial.println(message);
-        show_memory();
-        if (halt_on_error) {
-            fail_wait();
-        }
-    }
-    else {
-        err = wolfSSL_get_error(ssl, this_ret);
-        if (err == WOLFSSL_SUCCESS) {
-            Serial.print(F("Success m: "));
-            Serial.println(message);
-        }
-        else {
-            if (err < 0) {
-                wolfSSL_ERR_error_string(err, errBuf);
-                Serial.print(F("WOLFSSL Error: "));
-                Serial.print(err);
-                Serial.print(F("; "));
-                Serial.println(errBuf);
-            }
-            else {
-                Serial.println(F("Success: ssl object."));
-            }
-        }
-    }
-
-    return err;
-}
-
-/*****************************************************************************/
-/*****************************************************************************/
-/* Arduino loop()                                                            */
-/*****************************************************************************/
-/*****************************************************************************/
-void loop() {
-    char errBuf[80]    = "(no error";
-    char reply[80]     = "(no reply)";
-    const char msg[]   = "I hear you fa shizzle!";
-    const char* cipherName;
-    int input          = 0;
-    int replySz        = 0;
-    int retry_shutdown = SHUTDOWN_DELAY_MS; /* max try, once per millisecond */
-    int ret            = 0;
-    IPAddress broadcast_address(255, 255, 255, 255);
-
-    /* Listen for incoming client requests. */
-    client = server.available();
-    if (client)  {
-       Serial.println("Have Client");
-       while (!client.connected()) {
-           /* wait for the client to actually connect */
-           delay(10);
-       }
-        Serial.print("Client connected from remote IP: ");
-        Serial.println(client.remoteIP());
-
-        ssl = wolfSSL_new(ctx);
-        if (ssl == NULL) {
-            Serial.println("Unable to allocate SSL object");
-            fail_wait();
-        }
-
-        ret = wolfSSL_accept(ssl);
-        if (ret != WOLFSSL_SUCCESS) {
-            ret = wolfSSL_get_error(ssl, 0);
-            wolfSSL_ERR_error_string(ret, errBuf);
-            Serial.print("TLS Accept Error: ");
-            Serial.println(errBuf);
-        }
-
-        cipherName = wolfSSL_get_cipher(ssl);
-        Serial.print("SSL cipher suite is ");
-        Serial.println(cipherName);
-
-        Serial.print("Server Read: ");
-        while (!client.available()) {
-            /* wait for data */
-        }
-
-        /* read data */
-        while (wolfSSL_pending(ssl)) {
-            input = wolfSSL_read(ssl, reply, sizeof(reply) - 1);
-            if (input < 0) {
-                ret = wolfSSL_get_error(ssl, 0);
-                wolfSSL_ERR_error_string(ret, errBuf);
-                Serial.print("TLS Read Error: ");
-                Serial.println(errBuf);
-                break;
-            }
-            else if (input > 0) {
-                replySz = input;
-                reply[input] = '\0';
-                Serial.print(reply);
-            }
-            else {
-                Serial.println("<end of reply, input == 0>");
-            }
-        }
-
-        /* Write our message into reply buffer to send */
-        memset(reply, 0, sizeof(reply));
-        memcpy(reply, msg, sizeof(msg));
-        replySz = strnlen(reply, sizeof(reply));
-
-        Serial.println("Sending reply...");
-        if ((wolfSSL_write(ssl, reply, replySz)) != replySz) {
-            ret = wolfSSL_get_error(ssl, 0);
-            wolfSSL_ERR_error_string(ret, errBuf);
-            Serial.print("TLS Write Error: ");
-            Serial.println(errBuf);
-        }
-        else {
-            Serial.println("Reply sent!");
-        }
-
-        Serial.println("Shutdown!");
-        do {
-            delay(1);
-            retry_shutdown--;
-            ret = wolfSSL_shutdown(ssl);
-        } while ((ret == WOLFSSL_SHUTDOWN_NOT_DONE) && (retry_shutdown > 0));
-
-        if (retry_shutdown <= 0) {
-            /* if wolfSSL_free is called before properly shutting down the
-             * ssl object, undesired results may occur. */
-            Serial.println("Warning! Shutdown did not properly complete.");
-        }
-
-        wolfSSL_free(ssl);
-        Serial.println("Connection complete.");
-        if (REPEAT_CONNECTION) {
-            Serial.println();
-            Serial.println("Waiting for next connection.");
-        }
-        else {
-            client.stop();
-            Serial.println("Done!");
-            while (1) {
-                /* wait forever if not repeating */
-                delay(100);
-            }
-        }
-    }
-    else {
-        /* Serial.println("Client not connected. Trying again..."); */
-    }
-
-    delay(100);
-} /* Arduino loop repeats */

IDE/ARDUINO/sketches/wolfssl_version/README.md

@@ -1,3 +1,5 @@
 # Arduino Basic Hello World
 
 This example simply compiles in wolfSSL and shows the current version number.
+
+NOTE: Moving; See https://github.com/wolfSSL/wolfssl-examples/pull/499

IDE/ARDUINO/sketches/wolfssl_version/wolfssl_version.ino

@@ -1,24 +0,0 @@
-#include <Arduino.h>
-#include <wolfssl.h>
-#include <wolfssl/version.h>
-
-/* Choose a monitor serial baud rate: 9600, 14400, 19200, 57600, 74880, etc. */
-#define SERIAL_BAUD 115200
-
-/* Arduino setup */
-void setup() {
-    Serial.begin(SERIAL_BAUD);
-    while (!Serial) {
-        /* wait for serial port to connect. Needed for native USB port only */
-    }
-    Serial.println(F(""));
-    Serial.println(F(""));
-    Serial.println(F("wolfSSL setup complete!"));
-}
-
-/* Arduino main application loop. */
-void loop() {
-    Serial.print("wolfSSL Version: ");
-    Serial.println(LIBWOLFSSL_VERSION_STRING);
-    delay(60000);
-}

IDE/ARDUINO/wolfssl-arduino.cpp

@@ -0,0 +1,33 @@
+/* wolfssl-arduino.cpp
+ *
+ * Copyright (C) 2006-2025 wolfSSL Inc.
+ *
+ * This file is part of wolfSSL.
+ *
+ * wolfSSL is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * wolfSSL is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
+ */
+
+#include <Arduino.h>
+#include "wolfssl.h"
+
+/* Function to allow wolfcrypt to use Arduino Serial.print for debug messages.
+ * See wolfssl/wolfcrypt/logging.c */
+
+int wolfSSL_Arduino_Serial_Print(const char* const s)
+{
+    /* Reminder: Serial.print is only available in C++ */
+    Serial.println(F(s));
+    return 0;
+};

IDE/ARDUINO/wolfssl-arduino.sh

@@ -20,7 +20,7 @@
 # Reminder there's typically no $USER for GitHub actions, but:
 # ROOT_DIR="/mnt/c/Users/$USER/Documents/Arduino/libraries"
 #
-# The company name is "wolfSSL Inc."; There’s a space, no comma, and a period after "Inc."
+# The company name is "wolfSSL Inc."; There's a space, no comma, and a period after "Inc."
 # The Arduino library name is "wolfssl" (all lower case)
 # The Arduino library directory name is "wolfssl" (all lower case)
 # The Arduino library include file is "wolfssl.h" (all lower case)
@@ -29,7 +29,7 @@
 ROOT_DIR="/wolfssl"
 
 # The Arduino Version will initially have a suffix appended during fine tuning stage.
-WOLFSSL_VERSION_ARUINO_SUFFIX="-Arduino.3"
+WOLFSSL_VERSION_ARUINO_SUFFIX=""
 
 # For verbose copy, set CP_CMD="-v", otherwise clear it: CP_CMD="cp"
 # Do not set to empty string, as copy will fail with this: CP_CMD=""
@@ -65,6 +65,14 @@ if ! [ "$CP_CMD" = "cp " ]; then
     fi
 fi
 
+if [ "$ROOT_DIR" = "" ]; then
+    echo "ERROR: ROOT_DIR cannot be blank"
+    exit 1
+fi
+
+
+ARDUINO_ROOT="$HOME/Arduino/libraries"
+
 # Check environment
 if [ -n "$WSL_DISTRO_NAME" ]; then
     # we found a non-blank WSL environment distro name
@@ -73,8 +81,6 @@ if [ -n "$WSL_DISTRO_NAME" ]; then
     if echo "$current_path" | grep -Eq "^$pattern"; then
         # if we are in WSL and shared Windows file system, 'ln' does not work.
         ARDUINO_ROOT="/mnt/c/Users/$USER/Documents/Arduino/libraries"
-    else
-        ARDUINO_ROOT="$HOME/Arduino/libraries"
     fi
 fi
 echo "The Arduino library root is: $ARDUINO_ROOT"
@@ -84,6 +90,11 @@ if [ $# -gt 0 ]; then
     if [ "$THIS_OPERATION" = "INSTALL" ]; then
         THIS_INSTALL_DIR=$2
 
+        if [ "$THIS_INSTALL_DIR" = "/" ]; then
+            echo "ERROR: THIS_INSTALL_DIR cannot be /"
+            exit 1
+        fi
+
         echo "Install is active."
 
         if [ "$THIS_INSTALL_DIR" = "" ]; then
@@ -96,21 +107,31 @@ if [ $# -gt 0 ]; then
         else
             echo "Installing to $THIS_INSTALL_DIR"
             if [ -d "$THIS_INSTALL_DIR/.git" ];then
-                echo "Target is a GitHub repository."
+                echo "Target is a GitHub root repository."
                 THIS_INSTALL_IS_GITHUB="true"
             else
-                echo "Target is NOT a GitHub repository."
+                echo "Target is NOT a GitHub root directory repository. (e.g. not wolfssl/Arduino-wolfssl)"
             fi
         fi
     else
         echo "Error: not a valid operation: $THIS_OPERATION"
         exit 1
     fi
+else
+    echo "INSTALL parameter not specified. Installing to ROOT_DIR=$ROOT_DIR"
 fi
 
 
 ROOT_SRC_DIR="${ROOT_DIR}/src"
 EXAMPLES_DIR="${ROOT_DIR}/examples"
+
+if [ -n "$WOLFSSL_EXAMPLES_ROOT" ]; then
+    EXTRA_EXAMPLES_DIR="${WOLFSSL_EXAMPLES_ROOT}/Arduino"
+    echo "EXTRA_EXAMPLES_DIR=$EXTRA_EXAMPLES_DIR"
+else
+    echo "There are additional examples at https://github.com/wolfSSL/wolfssl-examples"
+    echo "Set WOLFSSL_EXAMPLES_ROOT to your local directory to include those examples."
+fi
 WOLFSSL_SRC="${ROOT_SRC_DIR}/src"
 WOLFSSL_HEADERS="${ROOT_SRC_DIR}/wolfssl"
 WOLFCRYPT_ROOT="${ROOT_SRC_DIR}/wolfcrypt"
@@ -131,8 +152,16 @@ OPENSSL_DIR_TOP="${WOLFSSL_HEADERS_TOP}/openssl"
 
 WOLFSSL_VERSION=$(grep -i "LIBWOLFSSL_VERSION_STRING" ${TOP_DIR}/wolfssl/version.h | cut -d '"' -f 2)
 if [ "$WOLFSSL_VERSION" = "" ]; then
-    echo "ERROR: Could not find wolfSSL Version in ${TOP_DIR}/wolfssl/version.h"
-    exit 1
+    echo "Current user: [$USER]"
+    if [ "$USER" = "" ] || [ "$USER" = "runner" ]; then
+        # Typically when there's no user, it is a GitHub workflow. It is not guaranteed to be "runner"
+        echo "No USER found, no version.h found. Setting Version text to [GitHub] for assumed workflow."
+        WOLFSSL_VERSION="GitHub"
+    else
+        echo "ERROR: Could not find wolfSSL Version in ${TOP_DIR}/wolfssl/version.h"
+        echo "Check autogen.sh and configure"
+        exit 1
+    fi
 else
     echo "Found wolfSSL version $WOLFSSL_VERSION"
     echo "# WOLFSSL_VERSION_ARUINO_SUFFIX $WOLFSSL_VERSION_ARUINO_SUFFIX"
@@ -225,26 +254,46 @@ if [ "$THIS_DIR" = "ARDUINO" ]; then
     $CP_CMD "${OPENSSL_DIR_TOP}"/* ."${OPENSSL_DIR}"                                          || exit 1
 
     # Finally, copy the Arduino-specific wolfssl library files into place: [lib]/src
-    $CP_CMD ./wolfssl.h ".${ROOT_SRC_DIR}"/wolfssl.h
+    $CP_CMD ./wolfssl.h           ".${ROOT_SRC_DIR}"/wolfssl.h           || exit 1
+    $CP_CMD ./wolfssl-arduino.cpp ".${ROOT_SRC_DIR}"/wolfssl-arduino.cpp || exit 1
 
+    unset NO_ARDUINO_EXAMPLES
     echo "Copy examples...."
     # Copy examples
     mkdir -p ".${ROOT_SRC_DIR}"/examples
 
-    echo "Copy wolfssl_client example...."
-    mkdir -p ".${EXAMPLES_DIR}"/wolfssl_client
-    $CP_CMD ./sketches/wolfssl_client/wolfssl_client.ino ".${EXAMPLES_DIR}"/wolfssl_client/wolfssl_client.ino || exit 1
-    $CP_CMD ./sketches/wolfssl_client/README.md          ".${EXAMPLES_DIR}"/wolfssl_client/README.md          || exit 1
+    if [ -n "$WOLFSSL_EXAMPLES_ROOT" ]; then
+        echo "Copy template example...."
+        mkdir -p ".${EXAMPLES_DIR}"/template/wolfssl_library/src
+        $CP_CMD "$WOLFSSL_EXAMPLES_ROOT"/Arduino/sketches/template/template.ino                             ".${EXAMPLES_DIR}"/template/template.ino                             || exit 1
+        $CP_CMD "$WOLFSSL_EXAMPLES_ROOT"/Arduino/sketches/template/README.md                                ".${EXAMPLES_DIR}"/template/README.md                                || exit 1
+        $CP_CMD "$WOLFSSL_EXAMPLES_ROOT"/Arduino/sketches/template/wolfssl_helper.c                         ".${EXAMPLES_DIR}"/template/wolfssl_helper.c                         || exit 1
+        $CP_CMD "$WOLFSSL_EXAMPLES_ROOT"/Arduino/sketches/template/wolfssl_helper.h                         ".${EXAMPLES_DIR}"/template/wolfssl_helper.h                         || exit 1
+        $CP_CMD "$WOLFSSL_EXAMPLES_ROOT"/Arduino/sketches/template/wolfssl_library/wolfssl_library.h        ".${EXAMPLES_DIR}"/template/wolfssl_library/wolfssl_library.h        || exit 1
+        $CP_CMD "$WOLFSSL_EXAMPLES_ROOT"/Arduino/sketches/template/wolfssl_library/src/wolfssl_library.cpp  ".${EXAMPLES_DIR}"/template/wolfssl_library/src/wolfssl_library.cpp  || exit 1
 
-    echo "Copy wolfssl_server example...."
-    mkdir -p .${EXAMPLES_DIR}/wolfssl_server
-    $CP_CMD ./sketches/wolfssl_server/wolfssl_server.ino ".${EXAMPLES_DIR}"/wolfssl_server/wolfssl_server.ino || exit 1
-    $CP_CMD ./sketches/wolfssl_server/README.md          ".${EXAMPLES_DIR}"/wolfssl_server/README.md          || exit 1
+        echo "Copy wolfssl_AES_CTR example...."
+        mkdir -p ".${EXAMPLES_DIR}"/wolfssl_AES_CTR
+        $CP_CMD "$WOLFSSL_EXAMPLES_ROOT"/Arduino/sketches/wolfssl_AES_CTR/wolfssl_AES_CTR.ino ".${EXAMPLES_DIR}"/wolfssl_AES_CTR/wolfssl_AES_CTR.ino || exit 1
+        $CP_CMD "$WOLFSSL_EXAMPLES_ROOT"/Arduino/sketches/wolfssl_AES_CTR/README.md           ".${EXAMPLES_DIR}"/wolfssl_AES_CTR/README.md           || exit 1
 
-    echo "Copy wolfssl_server example...."
-    mkdir -p .${EXAMPLES_DIR}/wolfssl_version
-    $CP_CMD ./sketches/wolfssl_version/wolfssl_version.ino ".${EXAMPLES_DIR}"/wolfssl_version/wolfssl_version.ino || exit 1
-    $CP_CMD ./sketches/wolfssl_version/README.md           ".${EXAMPLES_DIR}"/wolfssl_version/README.md           || exit 1
+        echo "Copy wolfssl_client example...."
+        mkdir -p ".${EXAMPLES_DIR}"/wolfssl_client
+        $CP_CMD "$WOLFSSL_EXAMPLES_ROOT"/Arduino/sketches/wolfssl_client/wolfssl_client.ino   ".${EXAMPLES_DIR}"/wolfssl_client/wolfssl_client.ino   || exit 1
+        $CP_CMD "$WOLFSSL_EXAMPLES_ROOT"/Arduino/sketches/wolfssl_client/README.md            ".${EXAMPLES_DIR}"/wolfssl_client/README.md            || exit 1
+
+        echo "Copy wolfssl_server example...."
+        mkdir -p .${EXAMPLES_DIR}/wolfssl_server
+        $CP_CMD "$WOLFSSL_EXAMPLES_ROOT"/Arduino/sketches/wolfssl_server/wolfssl_server.ino   ".${EXAMPLES_DIR}"/wolfssl_server/wolfssl_server.ino   || exit 1
+        $CP_CMD "$WOLFSSL_EXAMPLES_ROOT"/Arduino/sketches/wolfssl_server/README.md            ".${EXAMPLES_DIR}"/wolfssl_server/README.md            || exit 1
+
+        echo "Copy wolfssl_version example...."
+        mkdir -p .${EXAMPLES_DIR}/wolfssl_version
+        $CP_CMD "$WOLFSSL_EXAMPLES_ROOT"/Arduino/sketches/wolfssl_version/wolfssl_version.ino ".${EXAMPLES_DIR}"/wolfssl_version/wolfssl_version.ino || exit 1
+        $CP_CMD "$WOLFSSL_EXAMPLES_ROOT"/Arduino/sketches/wolfssl_version/README.md           ".${EXAMPLES_DIR}"/wolfssl_version/README.md           || exit 1
+    else
+        NO_ARDUINO_EXAMPLES=1
+    fi
 else
     echo "ERROR: You must be in the IDE/ARDUINO directory to run this script"
     exit 1
@@ -263,6 +312,8 @@ fi
 # as an Arduino-specific README.md file.
 VERSION_PLACEHOLDER="\${WOLFSSL_VERSION}"
 ARDUINO_VERSION_SUFFIX_PLACEHOLDER="\${WOLFSSL_VERSION_ARUINO_SUFFIX}"
+
+# This is the SOURCE to prepend. Note the OUTPUT is PREPENDED_README.md later copied to README.md
 PREPEND_FILE="Arduino_README_prepend.md"
 PROPERTIES_FILE_TEMPLATE="library.properties.template"
 sed s/"$VERSION_PLACEHOLDER"/"$WOLFSSL_VERSION"/ "$PREPEND_FILE" > "$PREPEND_FILE.tmp"
@@ -300,25 +351,39 @@ echo ""
 # Note we should have exited above if a problem was encountered,
 # as we'll never want to install a bad library.
 if [ "$THIS_OPERATION" = "INSTALL" ]; then
+    echo "Config:"
+    echo "cp ../../examples/configs/user_settings_arduino.h  ".${ROOT_SRC_DIR}"/user_settings.h"
+    # Nearly an ordinary copy, but we remove any lines with ">>" (typically edit with caution warning in comments)
+    grep -v '>>' ../../examples/configs/user_settings_arduino.h > ".${ROOT_SRC_DIR}"/user_settings.h || exit 1
+
+    # Show the user_settings.h revision string:
+    grep "WOLFSSL_USER_SETTINGS_ID" ."${ROOT_SRC_DIR}/user_settings.h"
+    echo ""
+
     if [ "$THIS_INSTALL_IS_GITHUB" = "true" ]; then
         echo "Installing to GitHub directory: $THIS_INSTALL_DIR"
         cp -r ."$ROOT_DIR"/* "$THIS_INSTALL_DIR" || exit 1
+        echo "Removing workspace library directory: .$ROOT_DIR"
+        rm -rf ".$ROOT_DIR"
     else
-        echo "Config:"
-        echo "cp ../../examples/configs/user_settings_arduino.h  ".${ROOT_SRC_DIR}"/user_settings.h"
-        # Nearly an ordinary copy, but we remove any lines with ">>" (typically edit with caution warning in comments)
-        grep -v '>>' ../../examples/configs/user_settings_arduino.h > ".${ROOT_SRC_DIR}"/user_settings.h || exit 1
 
-        # Show the user_settings.h revision string:
-        grep "WOLFSSL_USER_SETTINGS_ID" ."${ROOT_SRC_DIR}/user_settings.h"
-        echo ""
+        echo "Installing to local directory:"
+        if [ "$THIS_INSTALL_DIR" = "" ]; then
+            echo "mv .$ROOT_DIR $ARDUINO_ROOT"
+            mv  ."$ROOT_DIR" "$ARDUINO_ROOT" || exit 1
 
-        echo "Install:"
-        echo "mv .$ROOT_DIR $ARDUINO_ROOT"
-        mv  ."$ROOT_DIR" "$ARDUINO_ROOT" || exit 1
-
-        echo "Arduino wolfSSL Version: $WOLFSSL_VERSION$WOLFSSL_VERSION_ARUINO_SUFFIX"
+            echo "Arduino wolfSSL Version: $WOLFSSL_VERSION$WOLFSSL_VERSION_ARUINO_SUFFIX"
+        else
+            echo "cp -r .\"$ROOT_DIR\"/* \"$THIS_INSTALL_DIR\""
+            mkdir -p "$THIS_INSTALL_DIR" || exit 1
+            cp -r ."$ROOT_DIR"/* "$THIS_INSTALL_DIR" || exit 1
+        fi
     fi
 fi
 
+if [ -n "$NO_ARDUINO_EXAMPLES" ]; then
+    echo ""
+    echo "WARNING: No examples copied. Set WOLFSSL_EXAMPLES_ROOT as appropriate."
+    echo ""
+fi
 echo "Done!"

IDE/ARDUINO/wolfssl.h

@@ -1,6 +1,6 @@
 /* wolfssl.h
  *
- * Copyright (C) 2006-2024 wolfSSL Inc.
+ * Copyright (C) 2006-2025 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *
@@ -22,18 +22,28 @@
 /* Edit with caution. This is an Arduino-library specific header for wolfSSL */
 
 #ifndef WOLFSSL_USER_SETTINGS
+    /* Should already be defined in settings.h for #if defined(ARDUINO) */
     #define WOLFSSL_USER_SETTINGS
 #endif
 
 #include <Arduino.h>
 
-/* wolfSSL user_settings.h must be included from settings.h */
+/* wolfSSL user_settings.h must be included from settings.h
+ * Make all configurations changes in user_settings.h
+ * Do not edit wolfSSL `settings.h` or `config.h` files.
+ * Do not explicitly include user_settings.h in any source code.
+ * Each Arduino sketch that uses wolfSSL must have: #include "wolfssl.h"
+ * C/C++ source files can use: #include <wolfssl/wolfcrypt/settings.h>
+ * The wolfSSL "settings.h" must be included in each source file using wolfSSL.
+ * The wolfSSL "settings.h" must be listed before any other wolfSSL include.
+ */
 #include <wolfssl/wolfcrypt/settings.h>
 #include <wolfssl/ssl.h>
 
-int wolfSSL_Arduino_Serial_Print(const char *const s)
-{
-    /* See wolfssl/wolfcrypt/logging.c */
-    Serial.println(F(s));
-    return 0;
-};
+#ifndef WOLFSSL_ARDUINO_H
+#define WOLFSSL_ARDUINO_H
+
+/* Declare a helper function to be used in wolfssl/wolfcrypt/logging.c */
+int wolfSSL_Arduino_Serial_Print(const char* const s);
+
+#endif /* WOLFSSL_ARDUINO_H */

IDE/AURIX/Cpu0_Main.c

@@ -1,6 +1,6 @@
 /* Cpu0_Main.c
  *
- * Copyright (C) 2006-2023 wolfSSL Inc.
+ * Copyright (C) 2006-2025 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *
@@ -63,7 +63,7 @@ int fputc(int ch, FILE *f)
     if (ch == (int)'\n') {
         int chcr = (int)'\r';
         count = 1;
-        IfxAsclin_Asc_write(&g_asc, &chcr, &count, TIME_INFINITE);    
+        IfxAsclin_Asc_write(&g_asc, &chcr, &count, TIME_INFINITE);
     }
     count = 1;
     IfxAsclin_Asc_write(&g_asc, &ch, &count, TIME_INFINITE);

IDE/AURIX/README.md

@@ -9,7 +9,7 @@ Tested Platform:
 
 ## Running wolfCrypt on TriCore
 
-1) Add the wolfSSL source and headers to `Libraries/wolfssl`. 
+1) Add the wolfSSL source and headers to `Libraries/wolfssl`.
   - Only the following folders are required: `src`, `wolfcrypt` and `wolfssl`.
   - See script to help with producing bundle here: https://github.com/wolfSSL/wolfssl/blob/master/scripts/makedistsmall.sh
 2) Add `WOLFSSL_USER_SETTINGS` to the Preprocessing symbols list. C/C++ Build -> Settings -> TASKING C/C++ Compiler -> Preprocessing.

IDE/AURIX/user_settings.h

@@ -1,6 +1,6 @@
 /* user_settings.h
  *
- * Copyright (C) 2006-2023 wolfSSL Inc.
+ * Copyright (C) 2006-2025 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/AURIX/wolf_main.c

@@ -1,6 +1,6 @@
 /* wolf_main.c
  *
- * Copyright (C) 2006-2023 wolfSSL Inc.
+ * Copyright (C) 2006-2025 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/CRYPTOCELL/main.c

@@ -1,6 +1,6 @@
 /* main.c
  *
- * Copyright (C) 2006-2023 wolfSSL Inc.
+ * Copyright (C) 2006-2025 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *
@@ -18,8 +18,8 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
  */
-
-
+
+
 #include <wolfssl/wolfcrypt/settings.h>
 #include <wolfcrypt/test/test.h>
 #include <wolfcrypt/benchmark/benchmark.h>
@@ -63,4 +63,3 @@ int main(void)
 
     return 0;
 }
-

IDE/CRYPTOCELL/user_settings.h

@@ -1,6 +1,6 @@
 /* user_settings.h
  *
- * Copyright (C) 2006-2023 wolfSSL Inc.
+ * Copyright (C) 2006-2025 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *
@@ -401,6 +401,7 @@ extern "C" {
 
     /* prototypes for user heap override functions */
     /* Note: Realloc only required for normal math */
+    /* Note2: XFREE(NULL) must be properly handled */
     #include <stddef.h>  /* for size_t */
     extern void *myMalloc(size_t n, void* heap, int type);
     extern void myFree(void *p, void* heap, int type);

IDE/ECLIPSE/DEOS/deos_malloc.c

@@ -1,6 +1,6 @@
 /* deos_malloc.c
  *
- * Copyright (C) 2006-2023 wolfSSL Inc.
+ * Copyright (C) 2006-2025 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/ECLIPSE/DEOS/tls_wolfssl.c

@@ -1,6 +1,6 @@
 /* tls_wolfssl.c
  *
- * Copyright (C) 2006-2023 wolfSSL Inc.
+ * Copyright (C) 2006-2025 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/ECLIPSE/DEOS/tls_wolfssl.h

@@ -1,6 +1,6 @@
 /* tls_wolfssl.h
  *
- * Copyright (C) 2006-2023 wolfSSL Inc.
+ * Copyright (C) 2006-2025 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/ECLIPSE/DEOS/user_settings.h

@@ -1,6 +1,6 @@
 /* user_setting.h
  *
- * Copyright (C) 2006-2023 wolfSSL Inc.
+ * Copyright (C) 2006-2025 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/ECLIPSE/MICRIUM/client_wolfssl.c

@@ -1,6 +1,6 @@
 /* client_wolfssl.c
  *
- * Copyright (C) 2006-2023 wolfSSL Inc.
+ * Copyright (C) 2006-2025 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/ECLIPSE/MICRIUM/client_wolfssl.h

@@ -1,6 +1,6 @@
 /* client_wolfssl.h
  *
- * Copyright (C) 2006-2023 wolfSSL Inc.
+ * Copyright (C) 2006-2025 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/ECLIPSE/MICRIUM/server_wolfssl.c

@@ -1,6 +1,6 @@
 /* server_wolfssl.c
  *
- * Copyright (C) 2006-2023 wolfSSL Inc.
+ * Copyright (C) 2006-2025 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/ECLIPSE/MICRIUM/server_wolfssl.h

@@ -1,6 +1,6 @@
 /* server_wolfssl.h
  *
- * Copyright (C) 2006-2023 wolfSSL Inc.
+ * Copyright (C) 2006-2025 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/ECLIPSE/MICRIUM/user_settings.h

@@ -1,6 +1,6 @@
 /* user_setting.h
  *
- * Copyright (C) 2006-2023 wolfSSL Inc.
+ * Copyright (C) 2006-2025 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/ECLIPSE/MICRIUM/wolfsslRunTests.c

@@ -1,6 +1,6 @@
 /* wolfsslRunTests.c
  *
- * Copyright (C) 2006-2023 wolfSSL Inc.
+ * Copyright (C) 2006-2025 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/ECLIPSE/RTTHREAD/user_settings.h

@@ -1,6 +1,6 @@
 /* user_setting.h
  *
- * Copyright (C) 2006-2023 wolfSSL Inc.
+ * Copyright (C) 2006-2025 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/ECLIPSE/RTTHREAD/wolfssl_test.c

@@ -1,6 +1,6 @@
 /* wolfsslRunTests.c
  *
- * Copyright (C) 2006-2023 wolfSSL Inc.
+ * Copyright (C) 2006-2025 wolfSSL Inc.
  *
  * This file is part of wolfSSL.
  *

IDE/ECLIPSE/SIFIVE/README.md

@@ -1 +1 @@
-This folder has moved to `IDE/RISCV/SIFIVE-HIFIVE1`.
+This folder has moved to `IDE/RISCV/SIFIVE-HIFIVE1`.